SRL Archive

Coh3n

2009-06-28 04:47:04

This script was last updated on September 21st, 2014.

Current Version: 82

Over 6369 downloads!

Note to all users

[INDENT]
I will only be updating this script to fix bugs, I will NOT be adding features or making any major changes at this time. Also, you are using this script at your own risk. I cannot guarantee you won't be banned. This script is not perfect. You will notice some "fishy" mouse movements because not every part of the tree is "clickable". I've done what I can to reduce this, but it still happens. Be aware.
[/INDENT]

Features

[INDENT]

Efficient tree finding/detection methods
Works with ANY hatchet
Standard Antiban (nothing fancy)
Multiplayer
Breaking/Player switching
Detailed progress reports for both single and multiplayer

[/INDENT]

99's Achieved

[INDENT]

[/INDENT]

Setup Instructions

[INDENT]

Download the script.
Setup instructions are at the top of the script.
Post any progress reports and/or bugs!

[/INDENT]

Change Logs

[INDENT]
For detailed (code) changes, go here; for older version download links (that aren't on this post), go here.
[/INDENT]

Recent Progress Reports

[INDENT]


// by public3n3my (Dec. 30th, 2013)
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        3 Days, 11 Hours, 44 Minutes and 23 Seconds |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   False                                 |
|    Reason:                                         |
|      Tree Type:  Willow                            |
|      Loads Done: 1,131                             |
|      Logs Cut:   31,665                            |
|      Logs P/H:   378                               |
|      Levels Up:  0                                 |
|      Experience: 2,137,388                         |
|      Breaks:     57                                |
|____________________________________________________|
|____________________________________________________/

// by Coh3n (Feb. 8th, 2014) ~ Stopped manually
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 78 -                   |
|====================================================|
|        1 Days, 2 Hours, 16 Minutes and 12 Seconds  |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 498                               |
|      Logs Cut:   13,403                            |
|      Logs P/H:   510                               |
|      Experience: 904,702                           |
|      Breaks:     7                                 |
|____________________________________________________|
|____________________________________________________/

// by Rtap (Dec. 27th, 2013) ~ Stopped manually
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        14 Hours, 57 Minutes and 17 Seconds         |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 260                               |
|      Logs Cut:   7,020                             |
|      Logs P/H:   469                               |
|      Levels Up:  0                                 |
|      Experience: 473,850                           |
|      Breaks:     10                                |
|____________________________________________________|
|____________________________________________________/

// by Stragar (Dec. 21st 2013)
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        9 Hours, 2 Minutes and 27 Seconds           |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 129                               |
|      Logs Cut:   3,604                             |
|      Logs P/H:   399                               |
|      Levels Up:  0                                 |
|      Experience: 243,270                           |
|      Breaks:     6                                 |
|____________________________________________________|
|____________________________________________________/

// by Rtap (Dec. 8th 2013) ~ Manually stopped
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        15 Hours, 9 Minutes and 54 Seconds          |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 263                               |
|      Logs Cut:   7,096                             |
|      Logs P/H:   468                               |
|      Levels Up:  0                                 |
|      Experience: 478,980                           |
|      Breaks:     10                                |
|____________________________________________________|
|____________________________________________________/

[/INDENT]

Top Progress Report

[INDENT]


// by twobac
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.32 =============================]
[                                                                 ]
[     Ran For: 85 Hours, 28 Minutes and 38 Seconds                ]
[                                                                 ]
[     Nick    T/F    Loads     Logs     Lvls     Exp.     Brks    ]
[     ¯¯¯¯    ¯¯¯    ¯¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯    ]
[     WC01     T      118      3302      14     222884     19     ]
[     WC02     T      115      3220      3      217350     17     ]
[     WC03     T      114      3192      3      215460     17     ]
[     WC04     T      110      3080      3      207900     17     ]
[     WC05     T      107      2995      6      202162     16     ]
[     WC06     T      96       2688      3      181440     15     ]
[     WC07     T      91       2548      10     171990     13     ]
[     WC08     T      107      2996      11     202230     16     ]
[     WC09     T      88       2463      7      166252     15     ]
[     WC10     T      82       2295      7      154912     13     ]
[     WC11     T      66       1848      5      124740     11     ]
[     WC12     T      65       1820      8      122850     12     ]
[     WC13     T      76       2127      6      143572     13     ]
[                                                                 ]
[=================================================================]

[/INDENT]

ian.

2009-06-28 04:51:20

You're gonna get flamed for the "Rep+ me" thing ;] lol and I'll read through later :] No SCAR related stuff on this computer.

Coh3n

2009-06-28 04:52:57

From: 99_
You're gonna get flamed for the "Rep+ me" thing ;] lol and I'll read through later :] No SCAR related stuff on this computer.

Lol, yeah I guess it's really not needed. :p Looking forward to reading what you think. :)

JAD

2009-06-28 05:09:56

You left your password in the script.

I changed it and am keeping the account for myself.

ian.

2009-06-28 05:10:51

From: JAD
You left your password in the script.

I changed it and am keeping the account for myself.

Rep+

Coh3n

2009-06-28 05:14:11

From: JAD
You left your password in the script.

I changed it and am keeping the account for myself.

Of course I did. :o And, it's all yours. ;)

FML

alexrocket2

2009-06-28 05:21:36

Line 193: [Error] (17285:1): Unknown identifier 'RunEnergy' in script C:\Documents and Settings\eric\Local Settings\Temporary Internet Files\Content.IE5\P7RAPNZ7\Coh3n%27s%20Draynor%20Chop%20N%27%20Bank[1].scar

and yes i have opendev

Coh3n

2009-06-28 05:22:52

From: alexrocket2
Line 193: [Error] (17285:1): Unknown identifier 'RunEnergy' in script C:\Documents and Settings\eric\Local Settings\Temporary Internet Files\Content.IE5\P7RAPNZ7\Coh3n%27s%20Draynor%20Chop%20N%27%20Bank[1].scar

and yes i have opendev

You have the latest version? It should work. It's at Rev 107 I think.

alexrocket2

2009-06-28 06:11:59

aww crap im stupid. can you please post a link? i cant find it.

ian.

2009-06-28 06:13:05

Look at the first post. I explain how to do it ;D

alexrocket2

2009-06-28 06:20:28

ok wow you just exposed how stupid i am (or mabye just the benedryl making me sleepy). got that but now im getting this:
Loaded all chars. (NPCChars, TradeChars, SmallChars, StatChars, UpChars)
Failed when compiling
Line 4: [Error] (8:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL\Misc\SMART.SCAR

Coh3n

2009-06-28 06:26:28

From: alexrocket2
ok wow you just exposed how stupid i am (or mabye just the benedryl making me sleepy). got that but now im getting this:
Loaded all chars. (NPCChars, TradeChars, SmallChars, StatChars, UpChars)
Failed when compiling
Line 4: [Error] (8:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL\Misc\SMART.SCAR

You're never stupid around here. ;)

Did you move your plugins?

ian.

2009-06-28 06:27:23

You mean 'plugins' right? :p

Coh3n

2009-06-28 06:28:25

From: 99_
You mean 'plugins' right? :p

Lol XD, yes, yes I do. :p

ian.

2009-06-28 06:36:28

Updated the post by the way, so now it tells you to move plugins and where those folders are located ;]

Coh3n

2009-06-28 06:37:43

From: 99_
Updated the post by the way, so now it tells you to move plugins and where those folders are located ;]

Very nice. ;)

Thanks.

alexrocket2

2009-06-28 06:42:50

uggg… i did that too and it still doesnt work. its weird cause i havent really had a problem with smart until now.

edit :nevermind got it! (another stupid mistake)

running rite now looks good ill edit with a proggy soon

ian.

2009-06-28 06:49:02

Meh. Sign up for zaszmedia.com/forums and then delete your main SRL folder (C:\Program Files\SCAR 3.20\includes\SRL) and then download this (you have to sign up then go to that link) and follow the instructions. If that doesn't work, then you're doing something wrong and I'll make a vid for you :p

Coh3n

2009-06-28 06:52:40

From: alexrocket2
uggg… i did that too and it still doesnt work. its weird cause i havent really had a problem with smart until now.

Hmm alright well the only thing I can tell you is delete the contents of your SRL folder and do an SVN Checkout with the OpenDev link. That's what worked for me. :)

If that doesn't work, then you must be something wrong, sorry.

EDIT: Ninja'd!

EDIT2: Glad to see you got it to work, can't wait to see the results. :)

[JS]

2009-06-29 11:39:31

sad to see that only one person has tested this and hasnt gotten a result.
will test tonight and let you know in the morning how it went. :)

Coh3n

2009-06-29 18:46:18

From: [JS]
sad to see that only one person has tested this and hasnt gotten a result.
will test tonight and let you know in the morning how it went. :)

Thanks man, and yeah I would like to see some results, but hey, you can't always get what you want. ;)

Thanks for testing. :)

[JS]

2009-06-29 21:45:21

From: Coh3n
Thanks man, and yeah I would like to see some results, but hey, you can't always get what you want. ;)

Thanks for testing. :)

back to that i had the update as well got an error.

make it with publicSVN

Coh3n

2009-06-30 00:29:01

From: [JS]
make it with publicSVN

It's not difficult to get the latest Dev. Revision. There's an explanation on the first post.

[JS]

2009-06-30 12:14:52

[===============================================]
[        Draynor Chop N' Bank | By Coh3n        ]
[==================== V.0.0 ====================]
[                                               ]
[  Ran For: 44 Minutes and 48 Seconds           ]
[  Loads Done: 10                               ]
[  Logs Chopped: 280                            ]
[  Exp Gained: 18900                            ]
[  Levels Gained: 0                             ]
[                                               ]
[===============================================]

still running.

Coh3n

2009-06-30 18:45:20

From: [JS]

[===============================================]
[        Draynor Chop N' Bank | By Coh3n        ]
[==================== V.0.0 ====================]
[                                               ]
[  Ran For: 44 Minutes and 48 Seconds           ]
[  Loads Done: 10                               ]
[  Logs Chopped: 280                            ]
[  Exp Gained: 18900                            ]
[  Levels Gained: 0                             ]
[                                               ]
[===============================================]

still running.

Awesome! Finally someone using it! :D

[JS]

2009-06-30 21:03:31

From: Coh3n
Awesome! Finally someone using it! :D

yeah dude runs good. the banking and walking is amazing..only problem is its takes a 3-5 mins break after every load..takes up alot of time when trying to level. i would change that to take break after maybe 5-7 loads instead of every single one. but other than that great script:)

Camaro'

2009-06-30 23:51:03

im going to run this. edit will coem later.

edit, i was equipped with a dragon hatchet, and it didnt start. NEXT SCRIPT.

Coh3n

2009-07-01 19:59:32

From: [JS]
yeah dude runs good. the banking and walking is amazing..only problem is its takes a 3-5 mins break after every load..takes up alot of time when trying to level. i would change that to take break after maybe 5-7 loads instead of every single one. but other than that great script:)

Like did it actually log out and break?

I don't have a lot of time at this point in time, but I'll look into it as soon as possible.

From: The Cnr Sport
im going to run this. edit will coem later.

edit, i was equipped with a dragon hatchet, and it didnt start. NEXT SCRIPT.

Yeah it doesn't support a Dragon Hatchet, I'll add it in when I get the time.

cycrosism

2009-07-02 05:05:27

you copied A LOT of your script from mine and you didn't give me any credits.

Coh3n

2009-07-03 00:09:22

From: cycrosism
you copied A LOT of your script from mine and you didn't give me any credits.

I hope you're joking.

What part of your script do you think is remotely close to mine? I just looked at yours and they're nothing alike.

Markus

2009-07-03 01:11:49

Uhm, it's probably me, but when I take a look at both scripts, the only similarity I see is that both scripts got the mainloop in the procedure, and the DeclarePlayers has 3 lines the same (players[0].name, pass, and nick to be exact).
Oh well, it could be me though, I need to get new glasses next week anyways.

Coh3n

2009-07-03 01:27:25

From: Markus
Uhm, it's probably me, but when I take a look at both scripts, the only similarity I see is that both scripts got the mainloop in the procedure, and the DeclarePlayers has 3 lines the same (players[0].name, pass, and nick to be exact).
Oh well, it could be me though, I need to get new glasses next week anyways.

Thank you. :)

Coh3n

2009-07-05 19:46:54

Sorry for double post but…

Script Updated!

V.0.2
- Added Dragon Hatchet compatibility.

n33d scripts

2009-07-07 08:44:10

it doesnt detect dragon axe… and i have 87 woodcutting and it sas i dont have 30.

Coh3n

2009-07-07 08:57:35

From: n33d scripts
it doesnt detect dragon axe… and i have 87 woodcutting and it sas i dont have 30.

Lol that's not right, is it? :confused:

Um I don't know what to tell you about the level thing, it works perfectly fine for me. :confused:

Do you have the latest Dev Revision?

EDIT: Try new version, I got another Dragon Hatchet DTM, thanks to Da 0wner. :)

n33d scripts

2009-07-07 13:49:05

From: Coh3n
Lol that's not right, is it? :confused:

Um I don't know what to tell you about the level thing, it works perfectly fine for me. :confused:

Do you have the latest Dev Revision?

EDIT: Try new version, I got another Dragon Hatchet DTM, thanks to Da 0wner. :)

is that opendev? what rev worked for you?

Coh3n

2009-07-13 17:58:20

From: n33d scripts
is that opendev? what rev worked for you?

The latest Dev Revision, there's a link on the first post on how to get it if you don't know how.
__________________________________________________________________________________________________________

Script updated!

The new version now works with the new RS updates.

For instructions on how to get and run SCAR 3.21 + go here.

Please post any bugs/progress reports.

Smarter Child

2009-07-15 00:59:38

lol, whats with the underscores?

Coh3n

2009-07-15 01:14:53

From: Smarter Child
lol, whats with the underscores?

In the naming you mean? That's just for my convenience so I know which section each procedure is in. Doesn't save a lot of time in these shorter scripts, but once you get into longer ones I find it pretty useful. :)

ffcfoo

2009-07-16 15:16:13

Failed when compiling
Line 18: [Hint] (20:1): Variable 'P' never used in script C:\Program Files\SCAR 3.20\includes\SRL\SRL\Misc\SMART.SCAR
Line 352: [Error] (19790:38): Type mismatch in script C:\Documents and Settings\Dillon\Desktop\Coh3n's Draynor Chop N' Bank V.0.4.scar

I get this error?

Dynamite

2009-07-16 15:27:19

Post line 352…

T~M

ffcfoo

2009-07-16 15:30:19

From: The Man
Post line 352…

T~M

Here is line 352

Result := CountItems('dtm', Logs, []);

NocKme

2009-07-16 18:16:51

I've got the same problem :P

Coh3n

2009-07-16 20:32:34

Both you guys update to the latest Dev. Revision, make sure you read the first post on the requirements needed to run this script.

NocKme

2009-07-16 21:45:28

It's updated…

Coh3n

2009-07-16 22:01:19

From: NocKme
It's updated…

Did you update to SCAR 3.21? Because it's working perfectly for me.

NocKme

2009-07-17 01:01:55

yes I did… i have scar 3.21alpha and everything updated using SVN

Coh3n

2009-07-17 01:20:52

From: NocKme
yes I did… i have scar 3.21alpha and everything updated using SVN

Okay, that's odd, but I will tell you how to fix it.

If you're getting this error:


Line 18: [Hint] (20:1): Variable 'P' never used in script C:\Program Files\SCAR 3.20\includes\SRL\SRL\Misc\SMART.SCAR

Then you didn't update to the newest Dev Rev properly, that issue was fixed a long time ago.

I don't know why you're getting this error, with the Dev Rev it's fixed, but..


Line 352: [Error] (19790:38): Type mismatch in script C:\Documents and Settings\Dillon\Desktop\Coh3n's Draynor Chop N' Bank V.0.4.scar

With that error change that line to this:

Result := CountItems(Logs, 'dtm', []);

If you get to the Willow trees and it doesn't click them, it just moves the mouse from tree to tree rapidly, then you must not have install SCAR 3.21 or the Dev Revision correctly.

If you're positive you installed it correctly, and it's still not working, try using another script first, and see how that goes.

ffcfoo

2009-07-17 09:21:58

From: Coh3n
Both you guys update to the latest Dev. Revision, make sure you read the first post on the requirements needed to run this script.

oopssss! I guess I missed that lol. I installed the latest dev and it works! Thanks! Just one problem. I started in the bank it went outside to the willow tree's and then it just sat there hovering the smart red dot over the trees. It did not click none.

Coh3n

2009-07-17 17:47:58

From: ffcfoo
oopssss! I guess I missed that lol. I installed the latest dev and it works! Thanks! Just one problem. I started in the bank it went outside to the willow tree's and then it just sat there hovering the smart red dot over the trees. It did not click none.

That's a problem when the texts. You musn't have installed one of the above correctly, with SCAR 3.21 the uptexts have been fixed. Try updating/reinstalling, this has fixed that issue for a lot of people ASAIK.

Nevertheless, I will test it out now and edit this post.

EDIT: It works perfect for me, so try what I said above and see if that solves your problem.

hackncrack1

2009-07-21 14:28:21

i got this error

Line 24: [Error] (180:1): Duplicate identifier 'FriendChars' in script C:\Program\scarprerelease\includes\SRL/SRL/Core/Globals.scar

Coh3n

2009-07-21 19:52:54

From: hackncrack1
i got this error

Line 24: [Error] (180:1): Duplicate identifier 'FriendChars' in script C:\Program\scarprerelease\includes\SRL/SRL/Core/Globals.scar

That's a problem that some people are getting, all you have to do is download a certain file or change globals.scar. I see you've already posted on this thread.

http://www.villavu.com/forum/showthread.php?p=604711#post604711

Hopefully you figured it out. :)

lewiss

2009-07-21 21:56:38

Failed when compiling
Line 18: [Hint] (20:1): Variable 'P' never used in script C:\Documents and Settings\Lewis\Desktop\includes\SRL\SRL\Misc\SMART.SCAR
Line 352: [Error] (19790:38): Type mismatch in script

Coh3n

2009-07-21 22:26:53

From: lewiss
Failed when compiling
Line 18: [Hint] (20:1): Variable 'P' never used in script C:\Documents and Settings\Lewis\Desktop\includes\SRL\SRL\Misc\SMART.SCAR
Line 352: [Error] (19790:38): Type mismatch in script

Okay honestly, I'm sorry that I'm taking this out on you, but the same question has been asked 100 times! Read the requirements on the first post, you need at least SCAR 3.21 Alpha and the OpenDev Revision.

sam66

2009-07-22 04:02:17

\Local\Line 18: [Hint] (20:1): Variable 'P' never used in script C:\Program Files\SCAR 3.20\includes\SRL\SRL\Misc\SMART.SCAR
Line 352: [Error] (19790:38): Type mismatch in script C:\Users\****\AppDataMicrosoft\Windows\Temporary Internet Files\Low\Content.IE5\53JTT0VD\Coh3n%27s%20Draynor%20Chop%20N%27%20Bank%20V.0.4[1].scar

anyone help?

i tried to download scar 3.21 and update dev rev but i still getting the same error and my SRL folder had an exclamation marks what does that mean?

Coh3n

2009-07-22 04:45:03

From: sam66
i tried to download scar 3.21 and update dev rev but i still getting the same error and my SRL folder had an exclamation marks what does that mean?

That means there's something wrong with your SRL folder, delete the whole thing, then try getting OpenDev again.

sam66

2009-07-22 05:05:26

TY IT WORKED BUT NOW I GOT THIS Line 5: [Error] (7:11): Unknown identifier 'SmartIsKeyDown' in script C:\Users\****\Desktop\scar 3.21\includes\SRL\SRL\Misc\SMART.SCAR

Cerium

2009-07-22 05:29:43

Line 18: [Hint] (20:1): Variable 'P' never used in script FUCK:\. . .\SRL\Misc\SMART.SCAR
Line 352: [Error] (19790:38): Type mismatch in script FUCK:\. . .\Coh3n's Draynor Chop N' Bank V.0.4.scar

Coh3n

2009-07-22 07:02:24

From: sam66
TY IT WORKED BUT NOW I GOT THIS Line 5: [Error] (7:11): Unknown identifier 'SmartIsKeyDown' in script C:\Users\****\Desktop\scar 3.21\includes\SRL\SRL\Misc\SMART.SCAR

Did you move your plugins?

From: Cerium
Line 18: [Hint] (20:1): Variable 'P' never used in script FUCK:\. . .\SRL\Misc\SMART.SCAR
Line 352: [Error] (19790:38): Type mismatch in script FUCK:\. . .\Coh3n's Draynor Chop N' Bank V.0.4.scar

Dude, honestly, read the requirements for using the script before posting, or maybe look through some of the other problems, your question has been answered 100 times on this thread. You need SCAR 3.21 Alpha or better and the OpenDev Repository, if you don't now how to get it, check the first post.
_______________________________________________________________________________________________________________

To all the Jr. Members:

I know most of your are fine, but give me a break, the leechers at least attempt to solve their problems before posting, they READ THE FIRST POST, not just download the script. I've answered the same questions over and over again. Only post your problems here if you have all the requirements listed on the first post, and you've installed them successfully, and you've at least tried to look for a solution to the problem.

Again, this isn't to all Jr. Members, most of you are fine. :)

Thanks.

sam66

2009-07-22 10:10:18

okay good script but sumtimes the script walk more far from the bank (for deposit) and cant detect it so it log out after

can u fix this?

Coh3n

2009-07-22 18:37:43

From: sam66
okay good script but sumtimes the script walk more far from the bank (for deposit) and cant detect it so it log out after

can u fix this?

Can you be more specific? Like where exactly does it walk? Can you post a screenshot? This would be much more helpful to me. :)

Thanks.

sam66

2009-07-22 20:38:16

ok ill post a screen

edit:here is the screen

oh btw sumtimes the script stop working when it cut trees and it log out after

Coh3n

2009-07-22 23:20:38

From: sam66
oh btw sumtimes the script stop working when it cut trees and it log out after

What does it say in the Debug box when it stops? And the walking doesn't happen all the time does it? Just sometimes? I should be able to tweak it a little to make it work. :)

Thanks for the feedback.

sam66

2009-07-23 02:00:53

well it doesnt say anything in the debug box just log out and when when i log in back in rs im in the willow tree spot, for the walking it does sometime go more farer from the bank like on the screenshot i posted

Coh3n

2009-07-23 02:23:49

From: sam66
well it doesnt say anything in the debug box just log out and when when i log in back in rs im in the willow tree spot, for the walking it does sometime go more farer from the bank like on the screenshot i posted

I have no idea why it stops if it's still at the trees. :confused: It may be because SMART loses focus, and that's something I can't help. As for the walking look at line 221:

if RadialWalk(W_BankColor, 0, 77, 68, -2, 1) then

Try making the '68' a little smaller, and if it still doesn't work, try a little smaller, and so on. Let me know how that goes. :)

sam66

2009-07-23 22:48:06

the problem about the auto log out it's because in the debug box it's saying that it found a random events but i wasn'T in a random event when i logged back on and after it say attemp random solving failed kk WTH?

Coh3n

2009-07-23 23:10:48

From: sam66
the problem about the auto log out it's because in the debug box it's saying that it found a random events but i wasn'T in a random event when i logged back on and after it say attemp random solving failed kk WTH?

That is really weird, but I don't think that's a problem when my script, I'll look around and see if I can find a solution.

EDIT: There was a bug with one of the randoms, but that should be fixed now. Try updating SRL.

sam66

2009-07-24 01:09:27

yea i had an update to rev #36 now it doesnt happen anymore

Coh3n

2009-07-24 04:25:18

From: sam66
yea i had an update to rev #36 now it doesnt happen anymore

Awesome! :D

Have a progress report for me? :rolleyes:

sam66

2009-07-24 10:31:01

no cuz i have antoher problem sometimes when it goes to the bank to deposit it log out and in the debug box it show my progress and something about nextplayer i havent set another players, any solutions?

D1zl3

2009-07-24 10:34:04

From: Coh3n
if RadialWalk(W_BankColor, 0, 77, 68, -2, 1) then
Try making the '68' a little smaller, and if it still doesn't work, try a little smaller, and so on. Let me know how that goes. :)

im probly wrong since i just got back, but aren't the last 2 digits mod x, y? doesnt that mean if you have a negative, then it leaves the minimap? So wouldnt that mean it should be a positive and go into the map until it finds its color?

Sean[714]

2009-07-24 12:02:25

I'm going to try this out and run an overnighter.

I'll post a progress report tomorrow morning.

Sabzi

2009-07-24 12:40:56

From: D1zl3
im probly wrong since i just got back, but aren't the last 2 digits mod x, y? doesnt that mean if you have a negative, then it leaves the minimap? So wouldnt that mean it should be a positive and go into the map until it finds its color?

Afaik what they do: If the found point is an un-clickable point that 2 digits will determinite where to try clicking next. So -2 is right. It will move left two pixel and down one.
Correct me if I'm wrong.

Sean[714]

2009-07-24 13:36:56

Err I think there's something wrong with my revision or something?
I loaded it up, i got new revision, it loaded all the new text and such,

Then the script started,

Creating the NickTPA.
Found hatchet.
Woodcutting level is 31.
WaterColor = 10456191
Arrived at Willows.
Length:916
Length:747
Length:849
Length:349
Length:882
Length:789
Length:192

It kept moving the mouse over each tree super fast,
I'm sure it's not your script, something with my revison messed up.

Any ideas?

D1zl3

2009-07-24 13:39:12

From: oo00o
Err I think there's something wrong with my revision or something?
I loaded it up, i got new revision, it loaded all the new text and such,

Then the script started,

It kept moving the mouse over each tree super fast,
I'm sure it's not your script, something with my revison messed up.

Any ideas?

in scar hit crtl + f, look for setupsrl;, and underneath add MouseSpeed := 17;

Coh3n

2009-07-24 19:32:20

From: Sabzi
Afaik what they do: If the found point is an un-clickable point that 2 digits will determinite where to try clicking next. So -2 is right. It will move left two pixel and down one.
Correct me if I'm wrong.

That's my understanding of it. :)

From: sam66
no cuz i have antoher problem sometimes when it goes to the bank to deposit it log out and in the debug box it show my progress and something about nextplayer i havent set another players, any solutions?

What do you mean? Like it just doesn't deposit the logs? I need you to be more specific…

From: oo00o
It kept moving the mouse over each tree super fast,
I'm sure it's not your script, something with my revison messed up.

Any ideas?

People were having that problem when the texts were updated, that should be fixed for in the new Revision. And the script isn't suppose to show the Debug box or the "length: blah blah blah" I must have left that in by mistake, I'll upload a new version now for you guys.

sam66

2009-07-24 19:49:23

From: Coh3n

What do you mean? Like it just doesn't deposit the logs? I need you to be more specific…

ye it doesnt deposit it log out first saying something about nextplayer in the debug box but ihavent set any other players

Coh3n

2009-07-24 20:07:10

From: sam66
ye it doesnt deposit it log out first saying something about nextplayer in the debug box but ihavent set any other players

Try the new version, I fixed a few things. If it does that again, copy and paste exactly what it says in the debug box if you can. Thanks for the feedback. :)
_________________________________________________________________________________________________________________

Script updated!

[V.0.5]
- Fixed breaking, should now break for about 15 minutes after running for 1 hour. Was an incredibly stupid math error on my part, I honestly don't know what I was thinking.
- Hopefully improved the walking to the bank.
- Little tweaks here and there.

I have tested this version myself and everything seems to be working perfectly for me, if you are having problems, don't just give up, tell me so I can try and fix them for you. :)

sam66

2009-07-24 20:42:09

k tyvm gonna try it

oh yea and it only showed nextplayer in debug box nothing more

Coh3n

2009-07-24 20:58:48

From: sam66
k tyvm gonna try it

oh yea and it only showed nextplayer in debug box nothing more

No problem. :)

The new version showed NextPlayer?

sam66

2009-07-24 21:04:23

nope keeep getting logged out here what it say into the debug box

[===============================================]
[ Draynor Chop N' Bank | By Coh3n ]
[==================== V.0.4 ====================]
[ ]
[ Ran For: 13 Minutes and 32 Seconds ]
[ Loads Done: 2 ]
[ Logs Chopped: 54 ]
[ Exp Gained: 3645 ]
[ Levels Gained: 0 ]
[ ]
[===============================================]
NextPlayer ->see!

Coh3n

2009-07-24 21:36:34

From: sam66
nope keeep getting logged out

Do you have the amount of logs set to do more than two loads?

EDIT: I'm going to run it until I get back from working out, I'll see if I run into the same problem.

sam66

2009-07-24 22:50:25

i found the problem it cause when it go to the bank for deposit smart is confounding the bank booth with the ones that doesnt work here a screen

Coh3n

2009-07-24 22:56:26

From: sam66
i found the problem it cause when it go to the bank for deposit smart is confounding the bank booth with the ones that doesnt work here a screen

It should still find the right booths because it checks the uptexts. When I've tested it, yes, sometimes it does move over the wrong bank booth, but then it just moves on to the right ones and banks fine. Are you saying that's not the case? That is just checks the wrong booths a couple times then logs out, saying it can't find the bank?

I am going to make the fining randoms better, and try to improve the walking to the bank as sometimes walks a little north-west of the bank and then can't find the booths.

There should be a new version working in a couple hours. The current version still works fine, I'm just going to try and work out some bugs.

sam66

2009-07-24 23:07:14

ye it just checks the wrong booths a couple times then logs out and it say on debug box that i can't find the bank

Coh3n

2009-07-24 23:10:12

From: sam66
ye it just checks the wrong booths a couple times then logs out and it say on debug box that i can't find the bank

When it does that, are the actual bank booths visible on the screen?
_________________________________________________________________________________________________________________

I thought I'd give you a little explanation on what I'll be updating. I'm making the find randoms more efficient, so now it should detect when it's in a random all the time.

I added a little failsafe so if it can't find the bank booth it will try relocating to the bank, and after a certain amount of tries it still can't find it, then it will log out. I'm testing it out now, so expect the new version to be uploaded within a couple hours.

EDIT: So far it's done two loads perfectly. :) So it's a good sign so far.

Sean[714]

2009-07-25 00:56:41

Coh3n, please tell anybody with the same problem I had to install SCAR 3.21,
Maybe my SCAR was outdated, but I do'nt have that problem anymore!

sam66

2009-07-25 01:02:10

From: Coh3n
When it does that, are the actual bank booths visible on the screen?
_________________________________________________________________________________________________________________

I thought I'd give you a little explanation on what I'll be updating. I'm making the find randoms more efficient, so now it should detect when it's in a random all the time.

I added a little failsafe so if it can't find the bank booth it will try relocating to the bank, and after a certain amount of tries it still can't find it, then it will log out. I'm testing it out now, so expect the new version to be uploaded within a couple hours.

EDIT: So far it's done two loads perfectly. :) So it's a good sign so far.

nope only showing the side of the bank booths that doesnt work it does not happen every time

Coh3n

2009-07-25 01:40:24

From: oo00o
Coh3n, please tell anybody with the same problem I had to install SCAR 3.21,
Maybe my SCAR was outdated, but I do'nt have that problem anymore!

Glad to see you figured it out. :D

From: sam66
nope only showing the side of the bank booths that doesnt work it does not happen every time

Okay, well try the new version, I made a lot of changes, and tested it myself, here's the report, stopped manually. :)

[BANANA]

[/BANANA]
_________________________________________________________________________________________________________________

Script updated!

[V.0.6]
- The leveling up function now works, and adds to the progress report.
- Walking to the bank should be improved.
- Banking should be improved. I added a small failsafe that will relocate the player if it can't find the bank booth.

Please post progress reports/bugs/suggestions. :)

sam66

2009-07-25 21:51:24

sumtime when it deposit it logout saying couldnt detect willows uh what?
the tree spot appear on the minimaps and it say it couldnt detect it!?!

samm

2009-07-26 00:33:26

Coh3n, it just keeps losing itself after an invent, usually in the bank..
it gets lost in the North east corner..
and just next players..
:\

Coh3n

2009-07-26 18:34:29

From: sam66
sumtime when it deposit it logout saying couldnt detect willows uh what?
the tree spot appear on the minimaps and it say it couldnt detect it!?!

Like it says it couldn't walk to willows? That's odd. :confused:

From: samm
Coh3n, it just keeps losing itself after an invent, usually in the bank..
it gets lost in the North east corner..
and just next players..
:\

So it walks too far North-east? Apparently the failsafe I added in isn't working properly.
___________________________________________

I'll look at it and see if I can fix it.
___________________________________________

Script updated!

[V.0.7]
- Improved the walking to both the willows and the bank.

I got this progress report this morning from the new version, and it stopped because SMART lost focus because I was minimizing and restoring too often:

[BANANA]

2009-07-28 12:05:00

[===============================================]
[        Draynor Chop N' Bank | By Coh3n        ]
[==================== V.0.7 ====================]
[                                               ]
[  Ran For: 2 Hours, 19 Minutes and 12 Seconds  ]
[  Loads Done: 36                               ]
[  Logs Chopped: 972                            ]
[  Exp Gained: 65610                            ]
[  Levels Gained: 1                             ]
[                                               ]
[===============================================]

here you go my proggy ;)

oh yea btw can we do anything about when smart mouse goes hyper and when smart selecting other trees when ur alreadu cutting one

sam66

2009-07-28 12:11:19

From: sam66

[===============================================]
[        Draynor Chop N' Bank | By Coh3n        ]
[==================== V.0.7 ====================]
[                                               ]
[  Ran For: 2 Hours, 19 Minutes and 12 Seconds  ]
[  Loads Done: 36                               ]
[  Logs Chopped: 972                            ]
[  Exp Gained: 65610                            ]
[  Levels Gained: 1                             ]
[                                               ]
[===============================================]

here you go my proggy ;)

oh yea btw can we do anything about when smart mouse goes hyper(i mean the red dot) and when smart selecting other trees when ur already cutting one

Coh3n

2009-07-28 21:18:13

From: sam66
oh yea btw can we do anything about when smart mouse goes hyper(i mean the red dot) and when smart selecting other trees when ur already cutting one

Nice reports, as for the "spazzing" motions, it doesn't do that all the time right? Because for me it just does it once in a while, and to be honest, there isn't much I can do about that. I'll try, but it's not going to be perfect.
_______________________________________________________________

Script updated!

[V.0.8]
- Improved walking again.
- Shouldn't do a "spazzing motion with the mouse" as much as it used to.
- Added number of breaks taken to the progress report.

I also got this progress report with the new version, stopped because it cut the amount of logs I specified in DeclarePlayers.

[BANANA]

[/BANANA]

_______________________________________________________________

Script updated!

[V.0.9]
- Fixed a BIG issue with finding the color of the bank. If you downloaded version V.0.8 it will not work.

The progress report above was still from that version, I must have accidentally added something to the bank DTM before uploading, causing it to be invalid. Everything is working now. :)

Please post all bugs/suggestions/progress reports.

Enjoy! :)

Federation

2009-07-29 02:30:28

lol help?
Arrived at Willows.
Didn't find bank color.
Didn't find bank color.
Couldn't walk to bank.
Couldn't find the bank. Exiting

i got the 0.9v

Coh3n

2009-07-30 18:48:59

From: Federation
lol help?
Arrived at Willows.
Didn't find bank color.
Didn't find bank color.
Couldn't walk to bank.
Couldn't find the bank. Exiting

i got the 0.9v

Like it didn't even start chopping the willows? That's odd. :confused:

Try V.1.0. I got this report with it. Stopped because I lost connection.

[BANANA]

[/BANANA]

__________________________________________________________________________________________________

Script updated!

[V.1.0]
- Added DDTM walking to both the back and Willows, the script should now run much longer than before.
- Small tweaks here and there.

Please post reports/suggestions/bugs.

Enjoy! :)

sam66

2009-08-01 05:19:05

it works fine i had to stop it manually after 2 hours because of a random same after i restarted for like 3 hours why i keep getting random events?

Coh3n

2009-08-01 05:20:25

From: sam66
it works fine i had to stop it manually after 2 hours because of a random same after i restarted for like 3 hours why i keep getting random events?

You're always going to get Randoms, you can't control that. If the script fails at solving a random, report it in the Randoms Bugs section of the website to help develop working Randoms solvers. :)

I'm glad to see it's working well for you. :)

deadzone

2009-08-05 00:20:09

Include file C:\Program Files\SCAR 3.21\includes\SRL\SRL\Misc\SMART.SCAR does not exist.
Include file C:\Program Files\SCAR 3.21\includes\SRL\SRL.scar does not exist.
Failed when compiling

Sabzi

2009-08-05 00:25:37

From first post, first lines:

From: Coh3n

Note:
First off, you need the latest version of SCAR (SCAR 3.21), and Revision 37 or the latest Open-Dev Repository. If you don't know how to get these, go here.

I would suggest the here link.

Ilm1

2009-08-05 07:22:54

The bank pin 'enterer' is totally useless >:(
is it only me who has this problem or…

EDIT: The mouse is just moving around the screen not clicking anything until the failsafe starts and it opens bank screen again.

Coh3n

From: payton
mouse was spazy for me, it would jerk around and click on other trees even if was chopping.

i leveled up 1 time.

Thanks for the feedback, both of those bugs are suppose to be fixed, neither of them happen for me. :(

What's the reason it stopped?

Death-Magnetic

2009-08-13 17:54:58

From: Coh3n
No, that covers everything you need to do. :confused:

But you say it does that for other scripts too? So try and get 81 Woodcutting and then run a script, or does it say that for any skill you try to auto? If it's just woodcutting than I'm thinking that's a problem with SRL getting 8's and 0's mixed up.

I kinda got wc lvl 84… :) So It's kinda strange…
I'll try with other skills to.

~D-M

Coh3n

2009-08-13 17:56:02

From: Death-Magnetic
I kinda got wc lvl 84… :) So It's kinda strange…
I'll try with other skills to.

~D-M

Hmm alright, let me know how that goes, that's really odd.

payton

2009-08-13 17:58:01

From: Coh3n
Thanks for the feedback, both of those bugs are suppose to be fixed, neither of them happen for me. :(

What's the reason it stopped?

i stopped it. it was not getting many logs, and it looked really fake.

Payton

Coh3n

2009-08-13 17:58:51

From: payton
i stopped it. it was not getting many logs, and it looked really fake.

Payton

Lol, alright, well thanks for trying it out anyway.

Death-Magnetic

2009-08-15 20:19:10

It still doesn't work. : p

Coh3n

2009-08-15 20:20:18

From: Death-Magnetic
It still doesn't work. : p

Wait, so it doesn't work with other skills? What about other scripts?

Death-Magnetic

2009-08-15 20:52:42

Doesn't work with mining, or woodcutting. Either your WC bank script or your powercutter :S

EDIT: I've tried 3 different scripts, the miner dont start at all, and both your script says im wc lvl 0.

Coh3n

2009-08-15 21:17:33

From: Death-Magnetic
Doesn't work with mining, or woodcutting. Either your WC bank script or your powercutter :S

EDIT: I've tried 3 different scripts, the miner dont start at all, and both your script says im wc lvl 0.

Alright well something's definitely not right, I'll have to take a look at them later. Thanks for all your feedback. :)

Death-Magnetic

2009-08-15 21:24:50

Thanks.

No problem :D

~D-M

jnewman

2009-08-16 16:21:57

Hi Coh3n, I have a problem with the login screen. My user has a hyphenated name i.e mr-fred-bloggs. The login misses out the hyphens! Any ideas what to do in order to get them included in the login.

Coh3n

2009-08-16 16:48:28

From: jnewman
Hi Coh3n, I have a problem with the login screen. My user has a hyphenated name i.e mr-fred-bloggs. The login misses out the hyphens! Any ideas what to do in order to get them included in the login.

Uhm since when does Jagex allow hyphens in usernames? As far as I know, no symbols of any kind are allowed in usernames. If this has changed, then it would be an issue with SRL and I'm sure it is getting fixed as you read this. :)

jnewman

2009-08-16 18:14:30

I've had the account for about 1 1/2 years with the hyphens :)

Is it possible to break it such as: 'mr'&'-'&'fred'&'-'&'bloggs' ? The ampersand is representing adding text strings together - I have tried both ampersand and the plus symbol. The plus symbol works for the script but still does not print a hyphen in the login box :(

Looks like I miss out for now!

jnewman

2009-08-16 18:30:24

Please forget my question - I was being a complete idiot. Sorry to have wasted your time.

Coh3n

2009-08-18 08:10:24

From: jnewman
Please forget my question - I was being a complete idiot. Sorry to have wasted your time.

You'll never waste my time simply by asking a question. :p But I'm glad you got it figured out. As for the hyphens in you name… I've never seen that in my 5 years of playing RS. :eek:

Coh3n

2009-08-22 21:33:31

From: Trevor3443
The script will move from one tree to the next without the tree finishing 50% of the time. Sometimes it gets wild and starts clicking every where!
I love the script, banking is quick, on second load at the moment.

Thanks! :D

And, I'm aware of that problem. Now that I released my guide, I'm basically rewriting both my woodcutters. Right now I have reduced that problem significantly, and an updated version should be uploaded sometime in the next couple days.

Thanks a lot for using. :)

vinnievinboy

2009-08-24 01:30:25

good script, just seems to want to click the music button alot instead of clicking trees etc

Coh3n

2009-08-24 02:53:37

From: vinnievinboy
good script, just seems to want to click the music button alot instead of clicking trees etc

Yeah, that's a problem with SRL and FindNormalRandoms as it will click the music button every time it is called. Update your SRL, and that should be fixed.

IPwnz

2009-08-24 15:03:52

I could have sworn I posted this, but it doesn't find hatchet (dragon) and then logs itself out. Any ideas?

vinnievinboy

2009-08-24 15:11:56

From: Coh3n
Yeah, that's a problem with SRL and FindNormalRandoms as it will click the music button every time it is called. Update your SRL, and that should be fixed.

I thought it was a few scripts doing that. I hope that it hasnt got be banned ^_^

thanks.

Coh3n

2009-08-24 15:48:14

From: IPwnz
I could have sworn I posted this, but it doesn't find hatchet (dragon) and then logs itself out. Any ideas?

If you did post it, I completely missed it, my apologies. I guess that means my dragon hatched DTM doesn't work, it'll be fixed in the new version, thanks for pointing it out. :)

From: vinnievinboy
I thought it was a few scripts doing that. I hope that it hasnt got be banned ^_^

thanks.

Yeah I wouldn't worry about it, you should be fine. :)

i_reklaw

2009-08-25 03:04:46

Wow this is nice, it has great banking, walking, and I really like the way it clicks and moves camera. Seems like a screipt that I could run for long time and not get ban. I would have used it longer and had great proggie for you… but there is 1 problem. It frequently clicks on the dark wizards, and with no fight/run procedure. Hope you might be able to fix that soon, thanks for your awsome work. :)

Coh3n

2009-08-25 03:32:27

From: i_reklaw
Wow this is nice, it has great banking, walking, and I really like the way it clicks and moves camera. Seems like a screipt that I could run for long time and not get ban. I would have used it longer and had great proggie for you… but there is 1 problem. It frequently clicks on the dark wizards, and with no fight/run procedure. Hope you might be able to fix that soon, thanks for your awsome work. :)

Hey no problem, and I've never had it click the Dark Wizards before, but I am working on a total rewrite, so it'll be 100% better. Hopefully that will fix your problem. The new version should be ready sometime in the next couple days.

fumaor

2009-08-25 04:38:34

O.o new version !
You should do better anti random u.u
This script only solve 50% of randoms
see you ;) I hope the new version will be the best :D

i_reklaw

2009-08-25 04:52:11

Fantasic news Coh3n. I think when it clicked on the wizard was due to fact that camera was at angle so that the wizard was behind the tree where the mouse clicked on tree.

Fumaor im no scripter but I belive most of the scripts writen do not solve the random, its the srl includes, so would not be Coh3ns fult that the randoms are not solved.

Keep up the great work Coh3n, and thanks (h)

Coh3n

2009-08-25 07:39:45

Thanks to the both of you. :D

And yes, the randoms solvers are in SRL and currently there are a few that don't work, but the people working on them are doing their best to get then working as soon as possible. :)

fumaor

2009-08-25 09:32:58

Oh was my fault xD
tell us when script updated ^^

shadowcon

2009-08-25 17:12:00

[===============================================]
[ Draynor Chop N' Bank | By Coh3n ]
[==================== V.1.0 ====================]
[ ]
[ Ran For: 48 Minutes and 15 Seconds ]
[ Loads Done: 9 ]
[ Logs Chopped: 204 ]
[ Exp Gained: 13770 ]
[ Levels Gained: 0 ]
[ Breaks: 0 ]
[ ]
[===============================================]
Rock Color = 5588559
WaterColor = 10127227
WaterColor = 10127227
Couldn't walk to Willows, logging out.
[===============================================]
[ Draynor Chop N' Bank | By Coh3n ]
[==================== V.1.0 ====================]
[ ]
[ Ran For: 48 Minutes and 23 Seconds ]
[ Loads Done: 9 ]
[ Logs Chopped: 204 ]
[ Exp Gained: 13770 ]
[ Levels Gained: 0 ]
[ Breaks: 0 ]
[ ]
[===============================================]

Coh3n

2009-08-25 18:19:52

From: fumaor
Oh was my fault xD
tell us when script updated ^^

Lol don't worry about it and I will. :)

From: shadowcon
[===============================================]
[ Draynor Chop N' Bank | By Coh3n ]
[==================== V.1.0 ====================]
[ ]
[ Ran For: 48 Minutes and 15 Seconds ]
[ Loads Done: 9 ]
[ Logs Chopped: 204 ]
[ Exp Gained: 13770 ]
[ Levels Gained: 0 ]
[ Breaks: 0 ]
[ ]
[===============================================]
Rock Color = 5588559
WaterColor = 10127227
WaterColor = 10127227
Couldn't walk to Willows, logging out.
[===============================================]
[ Draynor Chop N' Bank | By Coh3n ]
[==================== V.1.0 ====================]
[ ]
[ Ran For: 48 Minutes and 23 Seconds ]
[ Loads Done: 9 ]
[ Logs Chopped: 204 ]
[ Exp Gained: 13770 ]
[ Levels Gained: 0 ]
[ Breaks: 0 ]
[ ]
[===============================================]

Hey thanks for posting that, and that walking bug is something that shouldn't happen, and it will be fixed in then new version.

EDIT: I'm just going through the testing stages of the new version, and it's looking pretty good, so keep an eye open. ;)

Coh3n

2009-08-26 03:53:03

2009-08-26 05:13:59

Alright I'll test script very soon.

Edit: It bugged the first time and left out a letter in my username, but restarting scar fixed it. Didn't find hatchet, logging out. Again dragon hatchet doesn't work, but whatever you need me to do to send in pictures or whatever I can do. I then tested it with a rune hatchet, and it works I suppose.. cut 6 willows then it just kinda sat around for a couple minutes switching back from invent to music. It's a serious bug, it needs to spend more time cutting willows.

Coh3n

2009-08-26 06:57:17

From: IPwnz
Alright I'll test script very soon.

Edit: It bugged the first time and left out a letter in my username, but restarting scar fixed it. Didn't find hatchet, logging out. Again dragon hatchet doesn't work, but whatever you need me to do to send in pictures or whatever I can do. I then tested it with a rune hatchet, and it works I suppose.. cut 6 willows then it just kinda sat around for a couple minutes switching back from invent to music. It's a serious bug, it needs to spend more time cutting willows.

Okay thanks for letting me know about the Dragon Axe, and the Music bug isn't in the script. There's nothing I can do about that. It's a bug in SRL that clicks the music tab every time FindNormalRandoms is called.

I've been told it only occurs in certain areas in RS, Draynor being one of them. Don't ask why this happens because I have no idea, but it should pass eventually.

I'll update the dragon hatchet DTM as soon as I can, thanks again for the feedback. :)

fumaor

2009-08-26 13:39:07

It works good for me O.o
Tonight I woodcutted 1800 willows ( 9 hours ) xD

I was close the scar without proggy soz xD
I will post next time

Coh3n

2009-08-26 19:18:05

From: fumaor
It works good for me O.o
Tonight I woodcutted 1800 willows ( 9 hours ) xD

I was close the scar without proggy soz xD
I will post next time

From: IPwnz
just wondering is there anything I can help you with to fix the dragon hatchet bug? Assuming you may not have much cash on RS and not be able to purchase one?

Haha believe me, money isn't the issue, my main has over 250M cash, he's just not a member anymore, and I have no way of making him one. :p

You could really help me out by letting me use an account with a Dragon hatchet for like an hour at the most. It shouldn't take long to get a working DTM.

@fumaor: Watch your language.

EDIT: IPwnz, if you don't want to lend me your account (which I fully understand if you don't), you could test out this DTM:


DTM := DTMFromString('78DA633CC1C8C0C0CAC4800C32C47819F8813' + 
       '42394CF7806C8E24355039385ABD907648911507318C86226A0E6' + 
       '2C90F59F11BF9A4B4016177E73002C5006A6');

I made that from the G.E., so I don't know if it'll work, but it's worth a shot. If it works, I'll update the script. :)

apx900

2009-08-28 02:26:33

******** SOLVED LAMP RANDOM ********
[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.1 =============================]
[ ]
[ Ran For: 4 Hours, 10 Minutes and 24 Seconds ]
[ Loads Done: 25 ]
[ Logs Chopped: 700 ]
[ Levels Gained: 4 ]
[ Exp Gained: 47250 ]
[ Breaks: 3 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Successfully executed

will post a full review tomorrow

Coh3n

If it just hover's over the tree, then there's nothing wrong with the tolerance as it finds the tree just fine. If it doesn't click, then there's something wrong with the uptext as it's not finding it properly. I know since the new update there are some letters that don't work properly, but I don't know which ones exactly.

It is possible that this is the problem. You may have also spelled "Willow" wrong in DeclarePlayers. Other than that, I can't think of why it wouldn't work. I'll test and look over it when I get time.

EDIT: Also make sure you have the latest version of the Open Dev Repository, otherwise you'll have all sorts of problems.

xSaintias

2009-09-06 19:10:20

From: Coh3n
If it just hover's over the tree, then there's nothing wrong with the tolerance as it finds the tree just fine. If it doesn't click, then there's something wrong with the uptext as it's not finding it properly. I know since the new update there are some letters that don't work properly, but I don't know which ones exactly.

It is possible that this is the problem. You may have also spelled "Willow" wrong in DeclarePlayers. Other than that, I can't think of why it wouldn't work. I'll test and look over it when I get time.

EDIT: Also make sure you have the latest version of the Open Dev Repository, otherwise you'll have all sorts of problems.

yes i updated dev and now it clicks;
HOWEVER, it cannot make its way to trees anymore. so right now this script is not operational atm.

Coh3n

2009-09-06 22:15:31

From: xSaintias
yes i updated dev and now it clicks;
HOWEVER, it cannot make its way to trees anymore. so right now this script is not operational atm.

Well what's it do? Does it just not walk to the right location? I know some of the Autocoloring functions don't work, so that could be it also.

yubinator

2009-09-07 16:23:07

Hey so its working so far, (5 minutes into it) but it seemed like it hard a little trouble when it started up. It says it couldn't find hatchet, and was going to log out, but then it went to the willows and started chopping. Is that normal?

Coh3n

2009-09-07 17:38:44

From: yubinator
Hey so its working so far, (5 minutes into it) but it seemed like it hard a little trouble when it started up. It says it couldn't find hatchet, and was going to log out, but then it went to the willows and started chopping. Is that normal?

Lol no that's not normal. I'll have to fix that. But, what hatchet were you using? Did you have it equipped or was it in the inventory? And, did you have the DeclarePlayers filled out correctly? It would be great to know all these things before I start looking at it. :)

Thanks,

Coh3n

yubinator

2009-09-07 17:45:21

haha sure. I had a rune hatchet that was equipped and I declared the player correctly. anything else?
Thanks!

Coh3n

2009-09-07 17:53:32

From: yubinator
haha sure. I had a rune hatchet that was equipped and I declared the player correctly. anything else?
Thanks!

Nope. :) Thanks, with the new update the DTM may have been messed up. And now I know for when I update it.

Coh3n

yubinator

2009-09-08 02:43:25

sweet, when are you planning to update? o.O

Coh3n

2009-09-08 03:20:48

From: yubinator
sweet, when are you planning to update? o.O

I was working on it earlier today, and testing a few things out. The walking was working fine for me, so I have to look more into it. I have an idea of why it messed up sometimes, so I'm not totally clueless. :p

I figured out why the hatchet detection wasn't working - Because of the new update, the hatchet handles are actually darker, so I had to remake the DTM.

Also, I think I fixed the Dragon hatchet detection, but it still needs testing. I'm not home right now, and wont be until tomorrow, and I work and have hockey tomorrow, so chances are their wont be an update until Wednesday.

I'll make a detailed list of the updates when necessary. Hopefully with these, it will work much smoother for everyone. :) Hopefully that answers your question sufficiently. :)

Thanks,

Coh3n

xSaintias

2009-09-08 04:33:51

From: Coh3n
I was working on it earlier today, and testing a few things out. The walking was working fine for me, so I have to look more into it. I have an idea of why it messed up sometimes, so I'm not totally clueless. :p

I figured out why the hatchet detection wasn't working - Because of the new update, the hatchet handles are actually darker, so I had to remake the DTM.

Also, I think I fixed the Dragon hatchet detection, but it still needs testing. I'm not home right now, and wont be until tomorrow, and I work and have hockey tomorrow, so chances are their wont be an update until Wednesday.

I'll make a detailed list of the updates when necessary. Hopefully with these, it will work much smoother for everyone. :) Hopefully that answers your question sufficiently. :)

Thanks,

Coh3n

yah. the hatchet wasn't working so i made my own DTM :D.
now it works fine however the it still cant find the road color.
SAD FACE!

Coh3n

2009-09-08 06:25:59

From: xSaintias
yah. the hatchet wasn't working so i made my own DTM :D.
now it works fine however the it still cant find the road color.
SAD FACE!

What road color? It shouldn't try to find any road color at all. Just the rock color, water color, and bank color.

xSaintias

2009-09-08 16:02:45

wow did i say road color…:duh:
i meant bank color sry :rolleyes:
actually to be more precise its all of them depending on the time.
Sometimes it finds them, sometimes it doesn't……
just gotta wait for auto color fixes i guess?

Coh3n

2009-09-09 05:41:48

From: xSaintias
wow did i say road color…:duh:
i meant bank color sry :rolleyes:

Ah, okay great, thanks a lot for that. :) Now I know exactly what's wrong. :p

EDIT: Script updated!

[I][V.1.2][/I]
- Made the following work with the new RS updates:
  - Hatchet finding.
  - Walking.
  - Log counting.
- Adjusted the Finding Willows relocation section.

I'm going to elaborate on some of the latter updates for you, just in case you guys want to know what I did. :)

First off, since the RS minimap changed drastically, I had to basically rewrite how the walking worked. In the last version, I used the Autocoloring function "FindRockColor", which worked quite well. Now, however, there are darker spots on the minimap in the Draynoy market (where the merchant stalls are), and that color is the same as the rock color. As you can probably guess, that seriously messed up all the walking.

So, how I use "FindWaterColor" and my own "FindBankColor" (which doesn't work all the time because of the changes in bank floor color). Because of these changes, the walking doesn't work amazingly, but it gets the job done. The relocation failsafes I added in are now used more than they used to, simply because the area is hard the make DDTMs for.

None the less, it should still work wonderfully, and you can get back to gaining woodcutting levels like it's your job. :p I had the latest version running for an hour before it stopped. It stopped because I started the script with my account logged in, and I forgot to fill out DeclarePlayers (aside for the amount of logs to cut). Since there was no username filled out, it stopped after it logged out to take a break. :duh:

Anyway, I've rambled on enough, please post problems/suggestions/progress reports.

Thanks,

Coh3n

xSaintias

2009-09-09 06:02:16

TIme to get back to my "job" as a woodcutter.
Expect a proggie soon.

Coh3n

2009-09-09 06:03:37

From: xSaintias
Ime to get back to my "job" as a woodcutter.
Expect a proggie soon.

Okay awesome, I really hope it works well for you. Bare in mind that the walking isn't perfect. To be honest, it is really hard, what with the crazy minimap updates.

xSaintias

2009-09-09 06:09:55

From: Coh3n
Okay awesome, I really hope it works well for you. Bare in mind that the walking isn't perfect. To be honest, it is really hard, what with the crazy minimap updates.

i know what you mean… i may not be a srl member but i do actually script little scripts like talking and burying bones….
(just never bother to submit for membership :D)
and this updates got me like omg…
every time i make it find a road color it finds the wrong one…
it really pisses me off…
EDIT: watch out because even if the script doesnt make it to wiilows and you are still in the bank, it wil still say arrived at willows and go to trying to locate and chop. You might want to check on that.
UPDATE: they upodated runescape…
not sure what they updated…
script doesn't seem to be affected though.

Coh3n

2009-09-09 16:16:47

From: xSaintias
i know what you mean… i may not be a srl member but i do actually script little scripts like talking and burying bones….
(just never bother to submit for membership :D)
and this updates got me like omg…
every time i make it find a road color it finds the wrong one…
it really pisses me off…
EDIT: watch out because even if the script doesnt make it to wiilows and you are still in the bank, it wil still say arrived at willows and go to trying to locate and chop. You might want to check on that.
UPDATE: they upodated runescape…
not sure what they updated…
script doesn't seem to be affected though.

Lol you said a lot of things there that are jumbled, and I didn't get much out of it. Is it working fine? Or is the walking seriously messed up?

Rich

2009-09-09 22:52:07

From: Coh3n
Lol you said a lot of things there that are jumbled, and I didn't get much out of it. Is it working fine? Or is the walking seriously messed up?

He's saying that sometimes it doesn't make it to the trees, but it thinks that it has and carries on trying to find and chop the trees. Also, that Runescape updated, and he doesn't know whether or not it will affect the script.

Richard

Coh3n

2009-09-10 00:05:07

From: R1ch
He's saying that sometimes it doesn't make it to the trees, but it thinks that it has and carries on trying to find and chop the trees. Also, that Runescape updated, and he doesn't know whether or not it will affect the script.

Richard

Lol, alright R1ch, thanks. :)

xSaintias

2009-09-10 00:22:08

From: R1ch
He's saying that sometimes it doesn't make it to the trees, but it thinks that it has and carries on trying to find and chop the trees. Also, that Runescape updated, and he doesn't know whether or not it will affect the script.

Richard

way to make sense of my mumbo jumbo lol.
sry bought that coh3n.
anyways, its working fine… untill it got that random where you have to choose the odd appendix out. not sure whats its called but yeah..
other than that its doing great.

Coh3n

2009-09-10 00:23:22

From: xSaintias
way to make sense of my mumbo jumbo lol.
sry bought that coh3n.
anyways, its working fine… untill it got that random where you have to choose the odd appendix out. not sure whats its called but yeah..
other than that its doing great.

Okay that's good to hear, and the Randoms is in SRL, not the script, just so you know. :p I'm glad you're using it.

Coh3n

3Garrett3

2009-09-10 00:39:38

I'm using it too right now, I have a couple suggestions.

It rotates the camera when it's cutting, and it will think that the willow disappeared.
It doesn't wait to stop moving before it tries clicking a willow, and it will sometimes missclick when it left clicks.

Coh3n

2009-09-10 00:45:26

From: 3Garrett3
I'm using it too right now, I have a couple suggestions.

It rotates the camera when it's cutting, and it will think that the willow disappeared.
It doesn't wait to stop moving before it tries clicking a willow, and it will sometimes missclick when it left clicks.

1. I'm guessing that's it stores the point it clicked the tree in "TP". In then checked a 20 x 20 box (I think) for the tree color. Because of this, if the camera angle moves, the coordinates may move to somewhere that doesn't have a tree. You can simply erase the camera movement in my Antiban if you wish to get rid of this.

2. The tree cut down detection isn't perfect, and to be honest, I don't think can be. It's going to fail once in a while. When you say "Left Clicks", do you mean it's left clicking the Willows to chop them? Because that's not suppose to happen I don't think. That could be one of the "RandomRClick" Antiban procedures. In which case it could randomly right click a Willow and move away.

I hope that clears a bit up. If these become a bigger problem than it's worth, I can try to make them better, I'm just not exactly sure how at this point in time.

Thanks,

Coh3n

3Garrett3

2009-09-10 00:52:17

From: Coh3n
1. I'm guessing that's it stores the point it clicked the tree in "TP". In then checked a 20 x 20 box (I think) for the tree color. Because of this, if the camera angle moves, the coordinates may move to somewhere that doesn't have a tree. You can simply erase the camera movement in my Antiban if you wish to get rid of this.

2. The tree cut down detection isn't perfect, and to be honest, I don't think can be. It's going to fail once in a while. When you say "Left Clicks", do you mean it's left clicking the Willows to chop them? Because that's not suppose to happen I don't think. That could be one of the "RandomRClick" Antiban procedures. In which case it could randomly right click a Willow and move away.

I hope that clears a bit up. If these become a bigger problem than it's worth, I can try to make them better, I'm just not exactly sure how at this point in time.

Thanks,

Coh3n

1- I think I will.

2- No, I meant that it left clicks (single click to chop) on the *tree* but since it is moving, it misses the tree. If it is supposed to right click, followed by a chooseoption, you have accidentally made it left click on every tree. I propose a simple Flag; before looking for the tree to make sure that you aren't moving. :)

The first one isnt really a problem, it just looks botty to rotate the cam and then find a new tree every time :\

The second one is more of a problem. I've noticed it clicks the tree, starts walking, loses the TPoint stored (understandable) but then tries clicking while it is moving, and misses the tree, then walks next to the tree and stands there, waiting for your failsafe to click a new one (I'm assuming you have a timeout somewhere)

But both have a simple fix. Thanks for the prompt response. I hope you continue to improve the script :)

Coh3n

2009-09-10 00:56:13

From: 3Garrett3
1- I think I will.

2- No, I meant that it left clicks (single click to chop) on the *tree* but since it is moving, it misses the tree. If it is supposed to right click, followed by a chooseoption, you have accidentally made it left click on every tree. I propose a simple Flag; before looking for the tree to make sure that you aren't moving. :)

The first one isnt really a problem, it just looks botty to rotate the cam and then find a new tree every time :\

The second one is more of a problem. I've noticed it clicks the tree, starts walking, loses the TPoint stored (understandable) but then tries clicking while it is moving, and misses the tree, then walks next to the tree and stands there, waiting for your failsafe to click a new one (I'm assuming you have a timeout somewhere)

But both have a simple fix. Thanks for the prompt response. I hope you continue to improve the script :)

Lol, when you said left click, I was thinking right click. :duh: You are right about the rotating camera, I think I'm going to take that out, thanks. :)

As for the second one, yes, I've noticed that when I test, and it really bugs me, I just never thought of a way to fix it. A simple "Flag" check is perfect (I think). I have to go to hockey right now, but I should be able to upload another version later tonight.

Thanks very much for your awesome feedback. :D

Coh3n

3Garrett3

2009-09-10 00:59:43

From: Coh3n
Lol, when you said left click, I was thinking right click. :duh: You are right about the rotating camera, I think I'm going to take that out, thanks. :)

As for the second one, yes, I've noticed that when I test, and it really bugs me, I just never thought of a way to fix it. A simple "Flag" check is perfect (I think). I have to go to hockey right now, but I should be able to upload another version later tonight.

Thanks very much for your awesome feedback. :D

Coh3n

You play hockey too? I think we should get married.

I hope that the flag check will help. If not, it can't be too complicated.

I'm okay with running the version right now, I will leave it on. I will hand out a proggy when it finishes too :).

Coh3n

2009-09-10 04:25:49

From: 3Garrett3
You play hockey too? I think we should get married.

I hope that the flag check will help. If not, it can't be too complicated.

I'm okay with running the version right now, I will leave it on. I will hand out a proggy when it finishes too :).

Okay awesome! And yeah I do. Google Cohen Adair, I feel special having my name on there. :p

3Garrett3

2009-09-10 05:50:39

http://www.successforlife.ca/node/29/

Is that you? Damn you're hot :p

Coh3n

2009-09-10 05:54:23

From: 3Garrett3
http://www.successforlife.ca/node/29/

Is that you? Damn you're hot :p

Yes it is, and thank-you. :p

Wow I didn't know they put that on the website. :o I thought that was just in the Course Calendar for my school.

EDIT: I'm working on an update right now.

EDIT2: Script updated!

Check out the first post for a list of the updates.

King ?

2009-09-10 14:48:22

[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.3 =============================]
[ ]
[ Ran For: 42 Minutes and 4 Seconds ]
[ Loads Done: 8 ]
[ Logs Chopped: 224 ]
[ Levels Gained: 4 ]
[ Exp Gained: 15120 ]
[ Breaks: 0 ]
[ AntiBan: 33 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Successfully executed

as said previously, it occasionally screws up (for me it just stops doing anything, usually with a nearly full or full inventory at trees) but its pretty good (im thinking 3 hour proggies very possible with current build)

King ?

2009-09-10 16:10:31

whats the word on updating to rev 38? does this script still work with it?

let me know if you need help testing.

peace

bomh

2009-09-10 16:49:00

the script is awsome sometime it mess up on the way back to the bank and also sometime it just stand by the tree do some random stuff for 3 to 4min with out cutting the tree

Coh3n

2009-09-10 17:57:17

From: King ?
whats the word on updating to rev 38? does this script still work with it?

let me know if you need help testing.

peace

It should work with Rev 38, but I recommend sticking with the Open-Dev. The more people test, the better, so yes, I always need help with testing. :p

From: bomh
the script is awsome sometime it mess up on the way back to the bank and also sometime it just stand by the tree do some random stuff for 3 to 4min with out cutting the tree

How does it mess up going to the bank? Does the walking mess up? If so, where does it walk?

What kind of "stuff" does it do for 3-4 minutes?

bomh

2009-09-10 22:57:57

oh sometime it can't find the bank booth because it when too far to the east side of the bank when it go to the bank

Coh3n

2009-09-10 23:40:29

From: bomh
oh sometime it can't find the bank booth because it when too far to the east side of the bank when it go to the bank

Okay, try changing line 443 to this:


Mouse(x + 25 + Random(5), y + 45 + Random(5), 4, 4, True);

Let me know how that works out, I don't have time to test it right now.

yubinator

2009-09-11 02:45:19

hey cohen, so i tried it out, but it stopped after one load and didn't deposit it. the proggy said it was successful but i couldn't find where i would change the desired load amount. i only found the amount of time wanted, and i had that at the equivilent of 60 minutes. am i doing something wrong?
thanks!

bomh

2009-09-11 06:08:38

k i will give it a test and get back to you

Coh3n

2009-09-11 07:24:43

From: yubinator
hey cohen, so i tried it out, but it stopped after one load and didn't deposit it. the proggy said it was successful but i couldn't find where i would change the desired load amount. i only found the amount of time wanted, and i had that at the equivilent of 60 minutes. am i doing something wrong?
thanks!

Umm, the required time that you're talking about is how long your character will be logged in before it takes a 15 minute (ish) break. You fill out how many logs you want to cut, not how many loads you with to do. This is done in the DeclarePlayers:


  with Players[0] do
  begin
    Name := 'Username';
    Pass := 'Password';
    Nick := 'ser';
    Active := True;
    Pin := '';
    Integers[0] := 1000;//This line right here, just change '1000' to however many logs you wish to cut.
    Booleans[0] := True;
    Booleans[1] := True;
    BoxRewards := ['amp', 'mote', 'ostume', 'oins', 'unes', 're', 'ems'];
  end;

I hope that helps. :)

@bomh, looking forward to it. :)

Coh3n

d0pe b0i

2009-09-11 08:47:37

something is terribly wrong. it must be my scar and srl or something. i start the script. smart pops up then nothing. doesnt log me in or anything. i disable log in and then enable it just clicks random tiles. any ideas? =/

King ?

2009-09-11 13:07:34

tried the adjustment for line 443 and got a 2.5 hour proggy, lost it because im an idiot tho. sorry. but I will tell you that it solved a random then logged out.

yubinator

2009-09-11 14:00:18

ahha thanks cohen! i'll post a proggy in about 12 hours.

King ?

2009-09-11 16:17:44

[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.3 =============================]
[ ]
[ Ran For: 2 Hours, 25 Minutes and 17 Seconds ]
[ Loads Done: 27 ]
[ Logs Chopped: 756 ]
[ Levels Gained: 2 ]
[ Exp Gained: 51030 ]
[ Breaks: 1 ]
[ AntiBan: 63 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Successfully executed

Coh3n

2009-09-11 21:05:32

From: d0pe b0i
something is terribly wrong. it must be my scar and srl or something. i start the script. smart pops up then nothing. doesnt log me in or anything. i disable log in and then enable it just clicks random tiles. any ideas? =/

Try updating you SCAR and SRL. Check out the guide in my signature for more information.

From: King ?
tried the adjustment for line 443 and got a 2.5 hour proggy, lost it because im an idiot tho. sorry. but I will tell you that it solved a random then logged out.

Don't worry about it, and that's good to know that it solved a random. :)

@yubinator - Looking forward to it. ;)
@King ? - Nice proggy, do you know why it stopped?

yubinator

2009-09-12 04:34:26

[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.2 =============================]
[ ]
[ Ran For: 11 Hours, 27 Minutes and 4 Seconds ]
[ Loads Done: 66 ]
[ Logs Chopped: 1798 ]
[ Levels Gained: 0 ]
[ Exp Gained: 121365 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================

So it seems to work, but the one thing im concerned about is the time to log ratio…? 11 hours for 1700 logs? I did put it on True for take random breaks, but that doesn't seem right lol. I have 93 woodcutting and am using a rune hatchet. I now put it on false and am gonna let it run. I was away all day so I have no idea what happened :(

Coh3n

2009-09-12 07:47:53

From: yubinator
[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.2 =============================]
[ ]
[ Ran For: 11 Hours, 27 Minutes and 4 Seconds ]
[ Loads Done: 66 ]
[ Logs Chopped: 1798 ]
[ Levels Gained: 0 ]
[ Exp Gained: 121365 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================

So it seems to work, but the one thing im concerned about is the time to log ratio…? 11 hours for 1700 logs? I did put it on True for take random breaks, but that doesn't seem right lol. I have 93 woodcutting and am using a rune hatchet. I now put it on false and am gonna let it run. I was away all day so I have no idea what happened :([/QUOTE]

Ahh, I thought I fixed that issue! Apparently not. If your character logs out for whatever reason, the script wont terminate, it just keeps running, thus adding to the time, and you'll end up with a proggy that's messed up. As soon as I get time, I'll try to fix that issue. It's been a real problem for a while now, and it just doesn't want to get fixed.

However, 1700 logs in one run isn't too bad, eh? :p

Coh3n

yubinator

2009-09-12 16:21:52

Oh yea, 1700 is excellent, and I figured out that when I logged in and I was in a random too haha.Great Script!!

grekory5

2009-09-12 19:29:22

Mine ran pretty well, except for some minor things such as:

Lagging everytime it looks for a tree/tries to cut it down
Sometimes misclicking when trying to walk to bank, and ending up outside of it, which makes the whole wcing process longer (it runs back to trees and then back to the bank)
And the music tab thing (but thats SRL's fault)

:p

yubinator

2009-09-12 19:38:39

[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.2 =============================]
[ ]
[ Ran For: 2 Hours, 58 Minutes and 27 Seconds ]
[ Loads Done: 55 ]
[ Logs Chopped: 1540 ]
[ Levels Gained: 0 ]
[ Exp Gained: 103950 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]

my best proggy yet! and one issue:
*it has about a 1:7 chance in 'not finding the bank' and has to relocate
but no complaints other than that, and it does relocate and finds the bank anyways so not that big a deal i suppose. I love this script, thanks Cohen!

oh and why does it keep going to the music tab? i know it happens with most scripts, but is that gonna be fixable?

Coh3n

2009-09-12 20:52:35

From: yubinator
Oh yea, 1700 is excellent, and I figured out that when I logged in and I was in a random too haha.Great Script!!

Haha thanks! :D

From: grekory5
Mine ran pretty well, except for some minor things such as:
Lagging everytime it looks for a tree/tries to cut it down
Sometimes misclicking when trying to walk to bank, and ending up outside of it, which makes the whole wcing process longer (it runs back to trees and then back to the bank)
And the music tab thing (but thats SRL's fault)
:p

The lagging must be your computer because it works perfectly for me. I think I said this before, but I'm not sure - The walking is buggy, and it really tough to make it click the bank exactly because of the minimap update. As long as the relocating is working well, I don't know what else I can do to make it better, unless someone comes up with an unreal autocoloring function.

From: yubinator

my best proggy yet! and one issue:
*it has about a 1:7 chance in 'not finding the bank' and has to relocate
but no complaints other than that, and it does relocate and finds the bank anyways so not that big a deal i suppose. I love this script, thanks Cohen!

oh and why does it keep going to the music tab? i know it happens with most scripts, but is that gonna be fixable?

That's awesome! :D And see the above explanation about the walking. The music tab is used to check for randoms. Every time the music tab is clicked, it thinks you're in a random. Clicking the tab is used to check for false positives so SCAR doesn't try to solve a random that you aren't in. I'm pretty sure people are working hard to get that bug fixed, but I'm not exactly sure.

Main

2009-09-12 23:31:16


[=================================================================]
[                  Coh3n's Draynor Chop N' Bank                   ]
[============================= V.1.3 =============================]
[                                                                 ]
[      Ran For: 3 Hours, 13 Minutes and 50 Seconds                ]
[      Loads Done: 38                                             ]
[      Logs Chopped: 1064                                         ]
[      Levels Gained: 16                                          ]
[      Exp Gained: 71820                                          ]
[      Breaks: 0                                                  ]
[      AntiBan: 101                                               ]
[                                                                 ]
[=================================================================]
[        Thank-you for using Coh3n's Draynor Chop N' Bank!        ]
[=================================================================]
[  Be sure to post your progress reports at VillaVu/SRL-Forums!   ]
[=================================================================]

Your banking messes up some times.

I've placed this


procedure Cut_ChopTrees; forward;

function Lv_LevelUp: Boolean;
begin
  if not LoggedIn then Exit;
  Result := FindNPCChatText('ongrat', Nothing) or FindNPCChatText('dvanced', Nothing) or
            FindNPCChatText('ulatio', Nothing) or FindNPCChatText('oodcuti', Nothing);
  if Result then
  begin
    Writeln('Congratulations, you have gained a Woodcutting level!');
    Wait(80 + Random(100));
    Players[CurrentPlayer].Integers[11] := Players[CurrentPlayer].Integers[11] + 1;
    Cut_ChopTrees;
  end;
end;

procedure S_FindRandoms;
begin
  LampSkill := 'woodcutting';
  If (not(Lv_LevelUp)) and (Not(Getcolor(499, 455)= 4807525)) then FindNormalRandoms;
end;

right after your signature procedure, why?
TBH: People don't really click the "clicktocontinue", they click the skill guide in stats at most. This also gets rid of the constant checking the music tab for anti random.
The get color check for the quick chat bubble beside your rsn. I've done a test before, and all randoms will pop up an npc chat screen.

yubinator

2009-09-13 00:06:32

[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.2 =============================]
[ ]
[ Ran For: 1 Hours, 41 Minutes and 45 Seconds ]
[ Loads Done: 26 ]
[ Logs Chopped: 728 ]
[ Levels Gained: 0 ]
[ Exp Gained: 49140 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Successfully executed

so that's my last run, about 5 minutes ago it ended due to the fact the smart screen went black? Is that my computer? or is that smart?

Main

2009-09-13 00:13:32

Your comps memory.
Search around the tutorial forum and you'll find a thread about this.

Coh3n

2009-09-13 00:25:36

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.3 =============================]
[ ]
[ Ran For: 3 Hours, 13 Minutes and 50 Seconds ]
[ Loads Done: 38 ]
[ Logs Chopped: 1064 ]
[ Levels Gained: 16 ]
[ Exp Gained: 71820 ]
[ Breaks: 0 ]
[ AntiBan: 101 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================][/PHP]

Well, now that I know posting it in PHP tags works, I'll add that to the first post. To whoever reads this, please post proggies in PHP tags. Thanks. :)

Main, could you be more specific about how the banking messes up please?

Also, that GetColor thing is geneous! I have had quite a few people comment about the Music tab bug both in this thread, and in my PowerChopper. You should go to the PublicSVN forum and that solution on this thread -> http://www.villavu.com/forum/showthread.php?p=630534#post630534 as I am sure a lot of people will be greatful. :)

The Cut_ChopTrees you added is good, but I think I'll just say something like this in my Cut_WhileChopping procedure:


if Lv_LevelUp then Break;

To Main and everyone else - I'm not at home right now, but as soon as I get time I'll do a quick update of what Main fixed, so be ready.

Thanks for the great feedback,

Coh3n

Main

2009-09-13 00:43:37

It clicks where the oak is then gets stuck.

Coh3n

2009-09-13 01:00:26

From: Main_Ftw
It clicks where the oak is then gets stuck.

On the east side of the bank you mean? And when it does it, does it relocate like it's suppose to?

Main

2009-09-13 01:13:55

Only after like 10 min.

Coh3n

2009-09-13 01:30:47

From: Main_Ftw
Only after like 10 min.

Okay great, thanks. :)

Revelations

2009-09-13 02:53:54

Just Downloaded, will hopefully have a proggy up by tomorrow, nice script…

Coh3n

2009-09-13 03:37:38

From: Revelations
Just Downloaded, will hopefully have a proggy up by tomorrow, nice script…

Thanks! :)

What I'm about to say, Revalations, isn't directed just at you, but everyone on the forums. This has been happening more than normal lately, and I just want to say something.

If you're going to download and use my script, great, I'm glad you did. But, don't post telling me you downloaded, and that you'll maybe have a proggy for me later on.

From this point on, any posts that are like Revalations, I am going to report at spam. Thanks,

Coh3n

yubinator

2009-09-13 03:40:45

hey cohen, i have another possible error?
it went up and down on my stats thing in RS, so it like went up my stats chart, then did, and up and down for like..5 minutes so i stopped the script cause it was really repetitive and exactly the same process.

Main

2009-09-13 03:52:58

I've noticed that too, but I've yet to find the cause.

Revelations

2009-09-13 03:57:44

From: Coh3n
Thanks! :)

What I'm about to say, Revalations, isn't directed just at you, but everyone on the forums. This has been happening more than normal lately, and I just want to say something.

If you're going to download and use my script, great, I'm glad you did. But, don't post telling me you downloaded, and that you'll maybe have a proggy for me later on.

From this point on, any posts that are like Revalations, I am going to report at spam. Thanks,

Coh3n

Ahh my apologies, I respect the reason for your decision. So, just in case, what do you want me to do when I do get a proggy? Just make a post then?

Coh3n

2009-09-13 04:32:26

From: yubinator
hey cohen, i have another possible error?
it went up and down on my stats thing in RS, so it like went up my stats chart, then did, and up and down for like..5 minutes so i stopped the script cause it was really repetitive and exactly the same process.

I think that's one of the Antiban procedures, and I've never heard of it going on for 5 minutes. There seems to be a lot of bugs in the Antiban procedures. I may just end up writing my own…

From: Revelations
Ahh my apologies, I respect the reason for your decision. So, just in case, what do you want me to do when I do get a proggy? Just make a post then?

Don't worry, it's not like I'm mad or anything, I was just pointing it out. ^^

What I would really like is for you to post the progress report, and why it stopped, maybe there was a bug, maybe it just stopped at a random. The more feedback, the better. :)

Revelations

2009-09-13 04:49:48

[ Ran For: 1 Hours, 42 Minutes and 44 Seconds ]
[ Loads Done: 19 ]
[ Logs Chopped: 532 ]
[ Levels Gained: 3 ]
[ Exp Gained: 35910 ]
[ Breaks:0 ]
[ AntiBan: 21 ]

<3 ;) I stopped it.

Coh3n

2009-09-13 04:56:49

From: Revelations
[ Ran For: 1 Hours, 42 Minutes and 44 Seconds ]
[ Loads Done: 19 ]
[ Logs Chopped: 532 ]
[ Levels Gained: 3 ]
[ Exp Gained: 35910 ]
[ Breaks: 0 ]
[ AntiBan: 21 ]

<3 ;) I stopped it.

Hey that's great! Glad to see it worked for you. :)

In the future, post the progress report in PHP tags ([hello][/hello] - replace hello with php), the reports just look cooler that way. ;)
[php][ Ran For: 1 Hours, 42 Minutes and 44 Seconds ]
[ Loads Done: 19 ]
[ Logs Chopped: 532 ]
[ Levels Gained: 3 ]
[ Exp Gained: 35910 ]
[ Breaks:0 ]
[ AntiBan: 21 ][/php]

Revelations

2009-09-13 05:02:22

Haha will do, thanks for the advice

Main

2009-09-13 06:25:47

Can you fix your banking a bit? *Hint BH*

yubinator

2009-09-13 16:55:01

From: Coh3n
Hey that's great! Glad to see it worked for you. :)

In the future, post the progress report in PHP tags ([hello][/hello] - replace hello with php), the reports just look cooler that way. ;)
[php][ Ran For: 1 Hours, 42 Minutes and 44 Seconds ]
[ Loads Done: 19 ]
[ Logs Chopped: 532 ]
[ Levels Gained: 3 ]
[ Exp Gained: 35910 ]
[ Breaks:0 ]
[ AntiBan: 21 ][/php]

how do you do the color proggys?

Main

2009-09-13 17:17:17

Your script is a awsome power chopper ;)

King ?

2009-09-13 17:26:30

[php]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.3 =============================]
[ ]
[ Ran For: 2 Hours, 1 Minutes and 47 Seconds ]
[ Loads Done: 14 ]
[ Logs Chopped: 392 ]
[ Levels Gained: 0 ]
[ Exp Gained: 26460 ]
[ Breaks: 1 ]
[ AntiBan: 44 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
[/php]

manually stopped btw.

3Garrett3

2009-09-13 18:28:55

From: yubinator
how do you do the color proggys?

He told you in his post…

Using his exact example. The word hello is equal to the word php.

[hello]
Put your progress report here.
[/hello]

And when you type it out right,

[php]
Put your progress report here
[/php]

Coh3n

2009-09-13 18:45:27

From: Main_Ftw
Can you fix your banking a bit? *Hint BH*

I'm working on it. ;)

And, nice, King ?, keep them coming. :D

yubinator

2009-09-13 22:11:55

umm what did i do wrong? lol

Coh3n

2009-09-13 22:15:46

yubinator - Replace "hello" with PHP. :p Also, awesome report! You can also go to the "Advanced" reply options, and view how your post will look. :)

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.2 =============================]
[ ]
[ Ran For: 4 Hours, 52 Minutes and 19 Seconds ]
[ Loads Done: 90 ]
[ Logs Chopped: 2520 ]
[ Levels Gained: 0 ]
[ Exp Gained: 170100 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================][/PHP]

Script updated!

Added randoms checks to the progress report.
Tweaked how it finds randoms - the constant clicking of the music tab should no longer be there, thanks to Main_FTW.
Completely rewrote the walking.
Other small tweaks here and there.

Enjoy! :D

Coh3n

yubinator

2009-09-13 22:18:02

[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.2 =============================]
[ ]
[ Ran For: 4 Hours, 52 Minutes and 19 Seconds ]
[ Loads Done: 90 ]
[ Logs Chopped: 2520 ]
[ Levels Gained: 0 ]
[ Exp Gained: 170100 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
[/PHP]

Coh3n

so i tried your new script, but it has trouble banking. i think when it finishes wcing, it clicks the bank, but when it arrives, the red flag stays there so it must think it hasn't arrived to the bank when it has, so it doesn't do anything. when i manually click it to move a block away to get rid of the red flag it and resume smart, it continues. hope thats an easy fix

zuricho

2009-09-13 23:03:28

So i tried this script out and when SMART loaded nothing happened.. I'm wondering if its because i am using SMART 4.5? verses version 4.4?

Main

2009-09-13 23:07:38

zuricho, if its your first time using SMART, set up the graphics and animation your self.
@coh3n,

I turned your script into a UBER power cutter, if you want I'll send you the drop procedure (you can add the for anti ban).

mcnollend

2009-09-14 01:25:21

[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.3 =============================]
[ ]
[ Ran For: 5 Hours, 2 Minutes and 26 Seconds ]
[ Loads Done: 41 ]
[ Logs Chopped: 1148 ]
[ Levels Gained: 3 ]
[ Exp Gained: 77490 ]
[ Breaks: 9 ]
[ AntiBan: 190 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Walking to willows, DDTM method.
Arrived at willows.
***** STR: FOUND RANDOM: 'Freaky Forester' *****
Forester: We should talk to the freaky forester.
Forester: Kill The 3 Tailed Pheasant.
Forester: ForesterSolver failed to find the pheasant.
***** STR: 'Freaky Forester' RANDOM SOLVING FAILED! *****

zuricho

2009-09-14 01:42:26

Ahhh okay I got it to work, thanks a lot. ill see if i get a worthy proggy:rolleyes:

3Garrett3

2009-09-14 04:38:27

It's running right now, but I noticed something, it clicks too far left and the flag doesnt go away sometimes.

I also looked in your code and it says "FFlag(5)" in the code. That will make it so that it doesnt time out I think?

I changed it to FFlag(0) so it might timeout easier, I dunno if it will though. I just got rid of the While part. And changed the coords to click by 5 pixles right, so it clicks a little ways away from the bank stalls.

Coh3n

2009-09-14 06:22:22

From: yubinator
so i tried your new script, but it has trouble banking. i think when it finishes wcing, it clicks the bank, but when it arrives, the red flag stays there so it must think it hasn't arrived to the bank when it has, so it doesn't do anything. when i manually click it to move a block away to get rid of the red flag it and resume smart, it continues. hope thats an easy fix

So it just sits there forever, it doesn't even bank after a 10 seconds or so? Also, please don't double post, just edit your previous. :)

From: Main_Ftw

I turned your script into a UBER power cutter, if you want I'll send you the drop procedure (you can add the for anti ban).

Why would I have the script drop the logs? Also, my Powercopper in the FFA section is exactly the same as this script, it just doesn't bank, it drops. But, I'm curious to see your dropping procedure, so you can PM it to me if you want. :)

From: mcnollend
[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.3 =============================]
[ ]
[ Ran For: 5 Hours, 2 Minutes and 26 Seconds ]
[ Loads Done: 41 ]
[ Logs Chopped: 1148 ]
[ Levels Gained: 3 ]
[ Exp Gained: 77490 ]
[ Breaks: 9 ]
[ AntiBan: 190 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Walking to willows, DDTM method.
Arrived at willows.
***** STR: FOUND RANDOM: 'Freaky Forester' *****
Forester: We should talk to the freaky forester.
Forester: Kill The 3 Tailed Pheasant.
Forester: ForesterSolver failed to find the pheasant.
***** STR: 'Freaky Forester' RANDOM SOLVING FAILED! *****

Nice proggy! :) Next time, post in PHP tags please. :)

From: 3Garrett3
It's running right now, but I noticed something, it clicks too far left and the flag doesnt go away sometimes.

I also looked in your code and it says "FFlag(5)" in the code. That will make it so that it doesnt time out I think?

I changed it to FFlag(0) so it might timeout easier, I dunno if it will though. I just got rid of the While part. And changed the coords to click by 5 pixles right, so it clicks a little ways away from the bank stalls.

FFlag(5) is suppose to continue if the character is 5 pixels away from the flag, so using FFlag(0) would make it less likely to continue. Also, I thought I already had it click 15 or so pixels to the right? If not, I meant to. :confused: I'll look at it now.

mcnollend

2009-09-14 08:17:17

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.3 =============================]
[ ]
[ Ran For: 6 Hours, 11 Minutes and 54 Seconds ]
[ Loads Done: 48 ]
[ Logs Chopped: 1344 ]
[ Levels Gained: 3 ]
[ Exp Gained: 90720 ]
[ Breaks: 11 ]
[ AntiBan: 295 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Successfully executed[/PHP]

The first one stopped because of the pheasant random, this one stopped from the coffin graveyard random.

3Garrett3

2009-09-14 13:32:15

From: Coh3n

FFlag(5) is suppose to continue if the character is 5 pixels away from the flag, so using FFlag(0) would make it less likely to continue. Also, I thought I already had it click 15 or so pixels to the right? If not, I meant to. :confused: I'll look at it now.

I dunno. It just didnt time out, sitting 2 pixles away from the flag.

I also noticed that it doesnt check for randoms enough. It misses almost every single one. There must be a loop somewhere that is missing a random check. I'm pretty sure it is located in the willow finding procedure. The script was running for 3 hours when I checked, and it was in a random, i finished the random and resumed, the next proggy was 4.5 hours, so it sat around for a long time without timing out. It was moving the map back and forth by a very small amount. :\

Coh3n

2009-09-14 16:38:46

From: mcnollend

The first one stopped because of the pheasant random, this one stopped from the coffin graveyard random.

Very nice report! :)

From: 3Garrett3
I dunno. It just didnt time out, sitting 2 pixles away from the flag.

I also noticed that it doesnt check for randoms enough. It misses almost every single one. There must be a loop somewhere that is missing a random check. I'm pretty sure it is located in the willow finding procedure. The script was running for 3 hours when I checked, and it was in a random, i finished the random and resumed, the next proggy was 4.5 hours, so it sat around for a long time without timing out. It was moving the map back and forth by a very small amount. :\

That's weird, so it stayed logged into the random and didn't do anything? I must have missed a FindNormalRandoms somewhere. Which random was it?

EDIT: @Garrett, you were right, there was no Randoms check right before it searched for trees, so that would have made it get stuck. I added that in in V.1.5. Thanks for pointing that out. :)

3Garrett3

2009-09-14 20:20:49

From: Coh3n
EDIT: @Garrett, you were right, there was no Randoms check right before it searched for trees, so that would have made it get stuck. I added that in in V.1.5. Thanks for pointing that out. :)

Yeah, it was just over and over rotating the camera back and forth by about 20 degree increments. I looked through the code and thought I saw "Makecompass(45+random(45))" or something, but I couldn't be sure if that was where it happened.

Btw, it was an abyss random. I've had it happen with mime, freaky forester, and evil bob as well. Hopefully all is fixed now :)

mcnollend

2009-09-14 21:00:20


Found bank DTM: 0 degrees, attempting to walk to willows...
We have arrived at the Willow trees!

That was in the debug box while it was logged out, so i logged in and my guy was just standing there next to the willows with a full load, so for some reason it logged after it got a full load, but it did a few loads just fine.

Coh3n

2009-09-14 22:07:07

From: 3Garrett3
Yeah, it was just over and over rotating the camera back and forth by about 20 degree increments. I looked through the code and thought I saw "Makecompass(45+random(45))" or something, but I couldn't be sure if that was where it happened.

Btw, it was an abyss random. I've had it happen with mime, freaky forester, and evil bob as well. Hopefully all is fixed now :)

Ohh I figured it out! It's cause I have a failsafe that if it can't find the trees it will move the camera and use object finding, instead on color. But, if it didn't find the trees, it never looked for randoms. So, I added that in. I hope that fixes the problem. Thanks. :)

From: mcnollend
Found bank DTM: 0 degrees, attempting to walk to willows...
We have arrived at the Willow trees!
That was in the debug box while it was logged out, so i logged in and my guy was just standing there next to the willows with a full load, so for some reason it logged after it got a full load, but it did a few loads just fine.

The only thing I can think of is that your computer lost connection.

Main

2009-09-14 23:30:07

For anti ban, I would suggest make the script back before inventory is full. I'll send over my version of your script when I get home ^^.

Coh3n

2009-09-15 00:11:10

From: Main_Ftw
For anti ban, I would suggest make the script back before inventory is full. I'll send over my version of your script when I get home ^^.

You mean bank before the inventory is full? Like maybe every 10 or so loads, bank with 1 or 2 inventory spots open? Not a bad idea if that's what you mean.

Main

2009-09-15 00:40:33

Yeah, like bank before inventory is full.
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.4 =============================]
[ ]
[ Ran For: 8 Hours, 25 Minutes and 56 Seconds ]
[ Loads Done: 0 ]
[ Logs Chopped: 0 ]
[ Levels Gained: 2 ]
[ Exp Gained: 0 ]
[ Breaks: 0 ]
[ AntiBan: 727 ]
[ Randoms Check: 727 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Successfully executed
[/php] pro, power chopping.
Also is there a procedure/function that check if a player talks to you on chat screen?

I know the proggie is werid, because I removed your banking function and walking to willow function.

3Garrett3

2009-09-15 01:29:11

I've been toying with the tracking of the trees too, since it seems to think that the tree is there more often than it should be. But i'm having trouble deciding what to do with it. It's the same idea that I would use, but I was thinking of using a getcolor. Since you use ATPA's though, it wont get the proper colour, so… it's tough :P

I'm still testing every now and then though, I swear.

Coh3n

2009-09-15 04:20:53

From: 3Garrett3
I've been toying with the tracking of the trees too, since it seems to think that the tree is there more often than it should be. But i'm having trouble deciding what to do with it. It's the same idea that I would use, but I was thinking of using a getcolor. Since you use ATPA's though, it wont get the proper colour, so… it's tough :P

I'm still testing every now and then though, I swear.

Lol, whatever floats your boat. :p It's always nice to see people trying new things. :) Perfect systems are hard to come by. :rolleyes:

@Main, I'd like to see the dropping procedure, you can just PM me the script. Also, look in Chat.scar, there's a ton of functions there for you to choose from. :)

3Garrett3

2009-09-15 05:37:57

It failed a random for me on one guy and something weird happened on the other guy, but I dont have the debug right here. I will post it in the morning.

BTW, not changing the tree following thing, I couldn't find a better way than what you had. :p

bomh

2009-09-15 09:31:17

here is mine
[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.3 =============================]
[ ]
[ Ran For: 10 Hours, 5 Minutes and 22 Seconds ]
[ Loads Done: 100 ]
[ Logs Chopped: 2800 ]
[ Levels Gained: 1 ]
[ Exp Gained: 189000 ]
[ Breaks: 6 ]
[ AntiBan: 453 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]

mcnollend

2009-09-15 09:33:10

[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.5 =============================]
[ ]
[ Ran For: 12 Hours, 23 Minutes and 57 Seconds ]
[ Loads Done: 88 ]
[ Logs Chopped: 2464 ]
[ Levels Gained: 3 ]
[ Exp Gained: 166320 ]
[ Breaks: 19 ]
[ AntiBan: 419 ]
[ Randoms Check: 7472 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
[/PHP]

would keep it on for longer but, i don't leave my comp on all night, and it's late, and i'm tired, so i'll start it up again tomorrow.

3Garrett3

2009-09-15 13:55:15

Wow. Lots of guys with nice proggies.

[php]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.6 =============================]
[ ]
[ Ran For: 3 Hours, 31 Minutes and 13 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯ ¯¯¯¯ ]
[ *** F 22 594 1 40095 1 ]
[ *** F 11 297 0 20047.5 0 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
[/php]

Mine always gets randoms XD.

So here are the things I said I'd find for you.

Found bank DTM: 200 degrees, attempting to walk to bank…
We have arrived at the bank!
*Proggy*
NextPlayer
SwitchToPlayer(PlayerNo: 0, Active: False);

This was in the debug 2.5 hours into the run.

Found bank DTM: 5 degrees, attempting to walk to willows…
We have arrived at the Willow trees!
Inventory full, banking logs…
** Warning in W_ToFromBank: Error Finding DTM: 'Bank'. **
Attempting to use radial walking…
** Warning in W_FindBankColor: Error Finding DTM: 'Bank' .**
** Warning in W_ToFromBank: Error Radial Walking: 'bank'. **
Attempting to use symbol finding…
** Warning in W_ToFromBank: Couldn't Walk To: 'bank'. **
Couldn't find the bank. Exiting
Couldn't open bank, attempting to relocate…
Relocation successful!
Found bank!

This was actually in the debug box at 2.25 hours, and although it says it was successful, it turned my player to False. Then kept using him. Then switched out for no reason 15 minutes later…

Coh3n

2009-09-15 16:50:12

From: 3Garrett3
Wow. Lots of guys with nice proggies.

I was just thinking the same thing! :rolleyes:

From: 3Garrett3
This was actually in the debug box at 2.25 hours, and although it says it was successful, it turned my player to False. Then kept using him. Then switched out for no reason 15 minutes later…

Wow, the chances of all three walking procedures not working is very low, I'd say you got very unlucky. The reason why it switched your player to false was because if all three walking methods fail, it's suppose to logout, and switch players. But, for some reason, that didn't seem to work for you.

I have to go to work now, but I'll look at it when I get home, and see if I can see the problem.

Thanks,

Coh3n

Main

2009-09-16 02:11:05

[php]23/07/2009: SCAR 3.21 has been released, it has many bugfixes and
some nice new features, be sure to check it out at:
http://freddy1990.com/scar.php
If you downloaded 3.21 on 22-23/07, please redownload it. I modified
it so it sends me some extra data with error reports to help debugging.
(Forums: http://freddy1990.com/forums)
(IRC: irc.dal.net #freddy1990)
(Donate: http://freddy1990.com/donate.php)
New client targeted
Successfully compiled (5526 ms)
SRL Compiled in 32 msec
Congratulations, you have gained a Woodcutting level!
[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.4 =============================]
[ ]
[ Ran For: 9 Hours, 52 Minutes and 1 Seconds ]
[ Loads Done: 0 ]
[ Logs Chopped: 0 ]
[ Levels Gained: 3 ]
[ Exp Gained: 0 ]
[ Breaks: 0 ]
[ AntiBan: 394 ]
[ Randoms Check: 394 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Successfully executed
[/php]

Pro…

Coh3n

You shouldn't use IE to begin with. :p

But I think either one would work, is there a certain reason why the symbol finding would be better?

Main

2009-09-17 01:27:20

If scar was about to click a tree, and then the NPC pops, up. The clicking will cancel the NPC chat.
also, how do I make EXP per hour? I have a variable for exp gained, and a variable for amount of time the script ran.

Coh3n

2009-09-17 04:04:41

From: Main_Ftw
If scar was about to click a tree, and then the NPC pops, up. The clicking will cancel the NPC chat.
also, how do I make EXP per hour? I have a variable for exp gained, and a variable for amount of time the script ran.

I think you'd just do something like time how long it took to do one load, then multiply it until you hit 60 minutes. That's for an approx. answer. And, I know what you mean about the NPC thing. ;)

yubinator

2009-09-17 06:19:40

hey cohen, why don't you make a script for yews? o.O

Coh3n

2009-09-17 06:21:05

From: yubinator
hey cohen, why don't you make a script for yews? o.O

Meh, I have other projects on the go, and I'm sure Zeph's is better than what I could make anyway. ;)

yubinator

2009-09-18 03:25:48

haha well zeph hasn't updated his since the big rs update so it's sorta useless until someone can revise, which I can't. :(
btw rs updated yesterday…it cut off my wc-ing after 2 hours i was pissed cause i was sleeping. do we have to wait on SRL update?

Coh3n

2009-09-18 03:27:15

From: yubinator
haha well zeph hasn't updated his since the big rs update so it's sorta useless until someone can revise, which I can't. :(
btw rs updated yesterday…it cut off my wc-ing after 2 hours i was pissed cause i was sleeping. do we have to wait on SRL update?

I don't think so.

Main

2009-09-18 03:29:14

Use this script to get like 85 wc then cut yews. or else its slow money..

Coh3n

2009-09-18 03:30:09

From: Main_Ftw
Use this script to get like 85 wc then cut yews. or else its slow money..

Yeah, but when you're not playing, it doesn't seem slow. :p

Main

2009-09-18 03:30:58

I got 83 Wc already, I don't complain because of the uber dropping procedure :D
Average 60-70k exp per hour lamo.

Coh3n

2009-09-18 04:47:08

From: Main_Ftw
I got 83 Wc already, I don't complain because of the uber dropping procedure :D
Average 60-70k exp per hour lamo.

Whatever works for yeah. :p

EDIT: Script updated!

Look at the first post for a full list of what was updated.

EDIT2: Reuploaded, completely butchered that upload. :duh:

yubinator

2009-09-18 14:01:58

haha im at 94 right now, and believe me the willows is still the quickest way to 99. chopping yews will yield a shit load of more money definitely, but its too slow for me. i might just fletch all my willows once i get to 99 wc, so ill have 99 fletching?

Coh3n

2009-09-18 17:14:15

From: yubinator
haha im at 94 right now, and believe me the willows is still the quickest way to 99. chopping yews will yield a shit load of more money definitely, but its too slow for me. i might just fletch all my willows once i get to 99 wc, so ill have 99 fletching?

It may not be enough. :rolleyes:

Main

2009-09-18 23:30:52

It is if you sell your junk to general shop.

Coh3n

2009-09-18 23:32:52

From: Main_Ftw
It is if you sell your junk to general shop.

And then use that money to buy more logs? Cause I was just talking about the logs you get from getting 99 Woodcutting.

Main

2009-09-18 23:36:02

Yeah, you won't get enough logs for 99 fletching if you cut them from 30-99 your self.
Each log you cut gets 8x WC exp, while if you fletch, 4x.(or 6x)

Coh3n

2009-09-18 23:37:37

From: Main_Ftw
Yeah, you won't get enough logs for 99 fletching if you cut them from 30-99 your self.
Each log you cut gets 8x WC exp, while if you fletch, 4x.(or 6x)

I know that's what I was saying. :p

bomh

2009-09-19 13:39:11

i keep getting this error when i run the version1.7

** Warning in W_ToFromBank: Error Finding DTM: 'Bank'. **
Attempting to use radial walking…
Can't find trees, relocating…
** Warning in W_ToFromBank: Error Finding DTM: 'Bank'. **
Attempting to use radial walking…
** Warning in W_FindBankColor: Error Finding DTM: 'Bank'. **
[Runtime Error] : Exception: Access violation at address 00786964 in module 'scar.exe'. Read of address 00000000 in line 301 in script C:\Users\scarprerelease\Scripts\Coh3n's Draynor Chop N' Bank V.1.7.scar

Main

2009-09-19 14:03:42

Is your color at 32 bits?

3Garrett3

2009-09-19 17:22:18

From: bomh
i keep getting this error when i run the version1.7

Me too.

Coh3n

2009-09-19 19:10:55

I have no idea why you guys are getting that error. It's working fine for me. :confused:

bomh

2009-09-20 01:40:01

From: Main_Ftw
Is your color at 32 bits?

yah i think so

yubinator

2009-09-20 04:42:16

hey i got that error too after 2 loads. hmm

yubinator

2009-09-20 04:50:01

hmm don't know what went wrong lol :

[=================================================================]
[ Coh3n's Draynor Chop N' Bank ]
[============================= V.1.7 =============================]
[ ]
[ Ran For: 1 Minutes and 53 Seconds ]
[ Loads Done: 2 ]
[ Logs Chopped: 56 ]
[ Levels Gained: 0 ]
[ Exp Gained: 3780 ]
[ Breaks: 0 ]
[ AntiBan: 0 ]
[ Randoms Check: 1 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
** Warning in W_ToFromBank: Error Finding DTM: 'Bank'. **
Attempting to use radial walking…
** Warning in W_ToFromBank: Error Radial Walking: 'Willows'. **
Attempting to use symbol finding…
** Warning in W_ToFromBank: Couldn't Walk To: 'Willows'. **
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed

Luski14

2009-09-20 20:13:34

Congratulations, you have gained a Woodcutting level!
Can't find trees, relocating…
Found bank DTM: 5 degrees on Point(634, 34), attempting to walk to willow…
Couldn't find trees, logging out.
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed

Gained a level, and it went to the tab and clicked on it.
Never tried to close the Woodcutting tab, so it got "lost", walked back to the bank, and logged out.

Also got this:

Can't find trees, relocating…
** Warning in W_ToFromBank: Error Finding DTM: 'Bank'. **
Attempting to use radial walking…
** Warning in W_FindBankColor: Error Finding DTM: 'Bank'. **
[Runtime Error] : Exception: Access violation at address 00786964 in module 'scar.exe'. Read of address 00000000 in line 301 in script C:\Users\…\Coh3n's Draynor Chop N' Bank V.1.7.scar

This happens when there is a boatload of people and all the tree's disappear at once.

Coh3n

2009-09-21 01:23:55

From: Luski14

This happens when there is a boatload of people and all the tree's disappear at once.

I must have added something in the finding trees function that caused that. I'll try to fix it when I have time.

yubinator

2009-09-24 02:39:23

Cohen where are youuuuuu?

Coh3n

2009-09-25 02:16:32

From: yubinator
Cohen where are youuuuuu?

Insanely busy, I work like 10 hours everyday and have hockey after. I'm probably not going to be very active for a while. :(

yubinator

2009-11-07 18:55:08

Cohen, thanks for such a great script! Between you and bobbohobbo i reached 99 woodcutting today!!! Thanks!

Coh3n

2009-11-08 09:59:10

From: yubinator
Cohen, thanks for such a great script! Between you and bobbohobbo i reached 99 woodcutting today!!! Thanks!

Haha congrats! Welcome to the 99 autoing club. ;)

vova9416

2009-11-12 20:38:58

i get the scar does not exist thing

Coh3n

2009-11-12 20:40:29

From: vova9416
i get the scar does not exist thing

You need to be more specific than that, but I'm guessing you need to download SRL.

vova9416

2009-11-12 21:01:29

dude i've used this before bt a long time ago now i forgot everythin, my includes folder is empty and i think that's a problem cuz the error is Include file C:\Program Files\SCAR 3.22\includes\SRL\SRL.scar does not exist.

Coh3n

2009-11-12 21:03:16

From: vova9416
dude i've used this before bt a long time ago now i forgot everythin, my includes folder is empty and i think that's a problem cuz the error is Include file C:\Program Files\SCAR 3.22\includes\SRL\SRL.scar does not exist.

Yeah that's exactly what I mean, you need to download SRL. Which is the stuff in the includes folder. Check out this guide to help you get everything setup properly.

http://www.villavu.com/forum/showthread.php?t=47714

Good luck!

Coh3n

vova9416

2009-11-12 21:09:48

i tried that like half hour ago bt when i click http://freddy1990.com/svn/scarprerelease, a download does nt start it gives me revision # 51 and likea bunch of blue links to click like scar.exe fixscar ect.

Coh3n

2009-11-12 21:11:32

From: vova9416
i tried that like half hour ago bt when i click http://freddy1990.com/svn/scarprerelease, a download does nt start it gives me revision # 51 and likea bunch of blue links to click like scar.exe fixscar ect.

That link is used to download SCAR, not SRL. Did you even read the headings of the guide? It's pretty straight forward. If you think everything is messed up, just start from scratch. That seems to work for most people.

vova9416

2009-11-12 21:22:28

how do i SVN checkout? doesn't show me that option

vova9416

2009-11-12 21:26:52

ok i did the svn checkout and now i got this error Can't create directory 'C:\Program Files\SCAR 3.22\Includes\SRL\.svn': Access

Sgt Soul

2009-11-12 23:12:17

please select EDIT post rather than creating 5 different posts, just makes it neater and less spammed.

Many Thanks
-Sgt Soul-

vova9416

2009-11-12 23:31:44

is hatchet equiped true, but for sum reason it is equiped but when smart logs in it says can't find hatchet loggin off

Sgt Soul

2009-11-13 04:26:06

From: vova9416
is hatchet equiped true, but for sum reason it is equiped but when smart logs in it says can't find hatchet loggin off

this is due to an SRL problem, not the script's fault. I don't know when it will be fixed :)

Coh3n

2009-11-13 11:23:18

From: sgt soul
this is due to an SRL problem, not the script's fault. I don't know when it will be fixed :)

Hmm, could you explain this problem? I haven't heard of it. I may just have to remake the hatchet DTM.

iJake

2009-11-13 13:22:16

I think it's to do with SRL too, because all the scripts do it.

Coh3n

2009-11-13 13:43:50

From: iJake
I think it's to do with SRL too, because all the scripts do it.

Well I tried testing it, and it looked like something in SRL, but I have no idea what. It just logged in and said "Creating the NickTPA", and did nothing for a very long time before saying it couldn't find the hatchet.

If anyone knows what's going on, please let me know. :smile:

Thanks,

Coh3n

iJake

2009-11-13 13:57:30

At the moment I'm using your powerchopper and I just removed the line 'S_SwitchPlayer;' in the section


    begin
      Writeln('Didn''t find hatchet, logging out.');
      S_SwitchPlayer;
    end;

And it worked.. but it don't drop the logs.

Coh3n

2009-11-13 15:50:42

From: iJake
At the moment I'm using your powerchopper and I just removed the line 'S_SwitchPlayer;' in the section
    begin
      Writeln('Didn''t find hatchet, logging out.');
      S_SwitchPlayer;
    end;
And it worked.. but it don't drop the logs.

That's weird, I'll try to take a better look into it tomorrow if I get time. Not really sure what's going on, but I'm sure someone can figure it out eventually.

Sgt Soul

2009-11-13 20:39:39

hmm yeah I've heard recently that the look of axes etc have changed (just slightly) I would reckon making a new DTM for the hatchet could be a good way to go, it was ether that or the uptext has changed. I don't know exactly sorry.

Coh3n

2009-11-14 00:15:25

From: sgt soul
hmm yeah I've heard recently that the look of axes etc have changed (just slightly) I would reckon making a new DTM for the hatchet could be a good way to go, it was ether that or the uptext has changed. I don't know exactly sorry.

Hey don't be sorry, your help is greatly appreciated. I should have time in the morning to make a quick update, hopefully that gets rid of the problem. :smile:

iJake

2009-11-14 13:13:42

Did you make the update? The uptext is the same for me though.

Coh3n

2009-11-14 13:18:11

From: iJake
Did you make the update? The uptext is the same for me though.

Na, sorry. Somethings came up. I'll do it right now and edit this post in a couple minutes.

iJake

2009-11-14 13:20:36

Ah, cool :-) I need to install SRL again ^^ :)

Coh3n

2009-11-14 13:25:41

From: iJake
Ah, cool :-) I need to install SRL again ^^ :)

;)

There, uploaded the new version. The hatchet finding should work well. I have no idea what the rest of the script is going to be like, so feedback is greatly appreciated.

Cheers,

Coh3n

iJake

2009-11-14 13:26:30

From: Coh3n
;)

There, uploaded the new version. The hatchet finding should work well. I have no idea what the rest of the script is going to be like, so feedback is greatly appreciated.

Cheers,

Coh3n

I'll post feedback as soon as I've tried it :) Thanks!

Coh3n

2009-11-14 13:27:07

From: iJake
I'll post feedback as soon as I've tried it :) Thanks!

Awesome, thanks very much. :smile:

vova9416

2009-11-14 14:15:29

thanks for fixing the script i'll try it right now
edit: couldn't find trees, logging out.
it bots sumtimes 3 minutes sumtimes 50 seconds and logs out
edit: Can't find trees, relocating… (then he runs to bank)
Found bank DTM: 5 degrees on Point(645, 46), attempting to walk to willow…
Couldn't find trees, logging out. (yea there are no trees in the bank)
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script.

FEAR

2009-11-14 15:45:40

From: vova9416
thanks for fixing the script i'll try it right now
edit: couldn't find trees, logging out.
it bots sumtimes 3 minutes sumtimes 50 seconds and logs out
edit: Can't find trees, relocating… (then he runs to bank)
Found bank DTM: 5 degrees on Point(645, 46), attempting to walk to willow…
Couldn't find trees, logging out. (yea there are no trees in the bank)
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script.

Wow lol…Go hereeeee!!!

http://www.villavu.com/forum/showthread.php?t=47714

:)

vova9416

2009-11-14 16:03:49

dude i did that yesterday and it should work fine. did u try the script urself?

iJake

2009-11-14 18:14:21

Hatchet finding works, but other errors as vova said:


Found normal hatchet.
** Warning in W_ToFromBank: Error Finding DTM: 'Bank'. **
Attempting to use radial walking...
Can't find trees, relocating...
Found bank DTM: 5 degrees on Point(636, 39), attempting to walk to willow...
Couldn't find trees, logging out.
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
[=================================================================]
[                  Coh3n's Draynor Chop N' Bank                   ]
[============================= V.1.8 =============================]
[                                                                 ]
[      Ran For: 2 Minutes and 9 Seconds                           ]
[      Loads Done: 0                                              ]
[      Logs Chopped: 0                                            ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 0                                              ]
[      Breaks: 0                                                  ]
[      AntiBan: 0                                                 ]
[      Randoms Check: 7                                           ]
[                                                                 ]
[=================================================================]
[        Thank-you for using Coh3n's Draynor Chop N' Bank!        ]
[=================================================================]
[  Be sure to post your progress reports at VillaVu/SRL-Forums!   ]
[=================================================================]

op_ivy_freak

2009-11-14 18:33:35

I keep getting this error:
Line 846: [Error] (20061:4): Unknown identifier 'Respond' in script C:\Program Files\SCAR 3.21\includes\SRL\SRL\Core\AntiRandoms\AntiRandoms.scar

And this is my line 846:

2: Respond;

Coh3n

2009-11-15 01:00:29

From: op_ivy_freak
I keep getting this error:
Line 846: [Error] (20061:4): Unknown identifier 'Respond' in script C:\Program Files\SCAR 3.21\includes\SRL\SRL\Core\AntiRandoms\AntiRandoms.scar

And this is my line 846:

2: Respond;

That is a problem with SRL. Do you have the latest version?

From: vova9416
thanks for fixing the script i'll try it right now
edit: couldn't find trees, logging out.
it bots sumtimes 3 minutes sumtimes 50 seconds and logs out
edit: Can't find trees, relocating… (then he runs to bank)
Found bank DTM: 5 degrees on Point(645, 46), attempting to walk to willow…
Couldn't find trees, logging out. (yea there are no trees in the bank)
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script.

Thanks for that info. Apparently there is more wrong with the script than I thought. Either way, I have learned a lot more about scripting since I wrote this, and I think it's time for another rewrite. I'll have the time early this week to go through everything.

I'll be sure to do some serious testing before releasing the next version. Thanks everyone for the input and being patient.

Coh3n

vova9416

2009-11-15 01:40:26

thanks dude and thanks for that downloading scar, srl and everything else in that guide. really helped me

Coh3n

2009-11-15 10:32:10

From: vova9416
thanks dude and thanks for that downloading scar, srl and everything else in that guide. really helped me

No problem at all, I'm here to help. :biggrin:

FEAR

2009-11-15 10:46:12

From: vova9416
thanks dude and thanks for that downloading scar, srl and everything else in that guide. really helped me

No problem at all, I'm here to help. :biggrin:

(Looks up :p)

Coh3n

2009-11-15 10:53:18

From: FEAR
No problem at all, I'm here to help. :biggrin:

(Looks up :p)

Haha, I actually laughed out loud at that. Took me a minute to comprehend what was going on, but funny nonetheless. :tongue:

EDIT: I love how you have my guides in your sig. <3 you.

FEAR

2009-11-15 10:59:06

From: Coh3n
Haha, I actually laughed out loud at that. Took me a minute to comprehend what was going on, but funny nonetheless. :tongue:

EDIT: I love how you have my guides in your sig. <3 you.

:D I love both your guides <3 so I thought why not let new junior members see it. Saves me from having to copy paste the url every time someone complains script doesn't work :p Those guides of yours are awesome <3 :D

And vivo of course I tried this script. Got one of my new pure from lvl 1 to 70 in 3 or 4 days (can't remember:p)

Coh3n

2009-11-17 16:47:20

From: FEAR
:D I love both your guides <3 so I thought why not let new junior members see it. Saves me from having to copy paste the url every time someone complains script doesn't work :p Those guides of yours are awesome <3 :D

And vivo of course I tried this script. Got one of my new pure from lvl 1 to 70 in 3 or 4 days (can't remember:p)

Yeah thanks haha. :smile:

I'm actually excited to update this script again. Hopefully I can make it better than ever. My girlfriend is coming over for the day, and I have hockey later, so I'm not going to be able to do anything today, but tomorrow I should be able to get something done. :smile:

Coh3n

EDIT: I've uploaded the new version. I basically rewrote every function/procedure. Hopefully things work much smoother. It works really well without SMART, but for some reason it doesn't work with SMART. I have no idea why, so you'll just have to run it the old fashioned way.

Enjoy! Please post any bugs that you encounter. :smile: Here are a couple small progress reports I got from testing this morning:

[PHP][=================================================================]
[ Coh3n's DraYnor Chop N' Bank! ]
[============================= V.1.9 =============================]
[ ]
[ Ran For: 43 Minutes and 54 Seconds ]
[ Loads Done: 7 ]
[ Logs Chopped: 196 ]
[ Levels Gained: 0 ]
[ Exp Gained: 13230 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[ Thank-You for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.1.9 =============================]
[ ]
[ Ran For: 57 Minutes and 59 Seconds ]
[ Loads Done: 10 ]
[ Logs Chopped: 280 ]
[ Levels Gained: 0 ]
[ Exp Gained: 18900 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[ Thank-You for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================][/PHP]

op_ivy_freak

2009-11-18 00:00:00

From: Coh3n
That is a problem with SRL. Do you have the latest version?

Thanks for that info. Apparently there is more wrong with the script than I thought. Either way, I have learned a lot more about scripting since I wrote this, and I think it's time for another rewrite. I'll have the time early this week to go through everything.

I'll be sure to do some serious testing before releasing the next version. Thanks everyone for the input and being patient.

Coh3n

Yes, I belive I have the latest SRL version. I have done a SVN Checkout update, and still get the problem.

Coh3n

2009-11-19 00:23:58

From: op_ivy_freak
Yes, I belive I have the latest SRL version. I have done a SVN Checkout update, and still get the problem.

Try deleting that line and see what happens.

sf411

2009-11-19 01:01:15

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.1.9 =============================]
[ ]
[ Ran For: 1 Hours, 37 Minutes and 27 Seconds ]
[ Loads Done: 10 ]
[ Logs Chopped: 275 ]
[ Levels Gained: 5 ]
[ Exp Gained: 18562.5 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[ Thank-You for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]

Here you go, bro! Great script, ran into the maze random though just so happened I was sitting at the comp when it came up, but that is just an SRL issue not anything to do with your script…Thanks again! I will continue to post proggies for ya aswell!

Coh3n

2009-11-19 10:55:01

From: sf411
Here you go, bro! Great script, ran into the maze random though just so happened I was sitting at the comp when it came up, but that is just an SRL issue not anything to do with your script…Thanks again! I will continue to post proggies for ya aswell!

Thanks a lot man. Do you happen to remember what the script was doing when the Maze random came up? And what did it read in the Debug box?

sf411

2009-11-19 11:35:46

It was choppin on the willows when the maze poped up. I am sorry I do not have the debug info, can you tell me how to get it for later posting or does the debug text save somewhere that I am unaware of?

Coh3n

2009-11-19 11:53:56

From: sf411
It was choppin on the willows when the maze poped up. I am sorry I do not have the debug info, can you tell me how to get it for later posting or does the debug text save somewhere that I am unaware of?

No that's all I needed to know, it's fine. The debug information just pops up in the debug box. But don't worry about. I just wanted to make sure that I had FindNormalRandoms in the right places.

Thanks,

Coh3n

sf411

2009-11-20 00:59:27

I was wondering if it was possible to change it from willow to oak trees. Seems oak logs are 4x the amount on G.E. of willows.

Coh3n

2009-11-20 15:10:55

It wouldn't work, unless I rewrote the entire script. However, you did just give me an awesome idea. If I get spare time, a neat project would be to make this script bank willows (like normal), and then cut and bank oaks in between the bank and the jail.

If there's another person that wants to take on this project, by all means, add it to my script, send it to me and I'll upload it, giving you credit of course. ;)

magixboy

2009-11-21 18:48:07

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.1.9 =============================]
[ ]
[ Ran For: 4 Hours, 6 Minutes and 22 Seconds ]
[ Loads Done: 10 ]
[ Logs Chopped: 280 ]
[ Levels Gained: 0 ]
[ Exp Gained: 18900 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[ Thank-You for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Successfully executed

After the 15 min break, it didnt log me in. :(
LOL - But overall, great sczript dude. :rolleyes:

Coh3n

2009-11-21 21:50:58

Lol. Well that's not suppose to happen now is it? I must have forgotten a Login procedure. I'll fix it as soon as I get home.

Thanks for the feedback,

Coh3n

iJake

2009-11-22 08:07:05

From: Coh3n
Lol. Well that's not suppose to happen now is it? I must have forgotten a Login procedure. I'll fix it as soon as I get home.

Thanks for the feedback,

Coh3n

*is eagerly awaiting the oak banker* ;)

I'll run this for now!

By the way, does smart not work anymore?

Coh3n

2009-11-22 12:21:45

From: iJake
*is eagerly awaiting the oak banker* ;)

I'll run this for now!

By the way, does smart not work anymore?

That's a very good question. I've talked to a few people, and it seems to be working. However, for whatever reason, with this script it is extremely slow and it won't find your hatchet. It also won't detect what woodcutting level you have.

So, for now on, I will only be releasing Non-SMART versions of this script. If you want SMART, you can simple add it yourself. :smile:

Oh, and I've decided that I'm definitely going to Oak chopping and banking, it's just a matter of when it'll get done. I should have plenty of time this week, so expect it within the next few days.

Thanks for your patients,

Coh3n

sf411

2009-11-23 13:54:07

Ok the script is now having problems going to the bank and finding a bank slot, might want to check that out…

Coh3n

2009-11-23 14:09:34

From: sf411
Ok the script is now having problems going to the bank and finding a bank slot, might want to check that out…

I'm aware of the slow banking, I have fixed it in the next version. Are you saying it's having trouble walking to the bank? Where does it walk?

sf411

2009-11-23 16:48:27

It walks to right outside the doorway of the bank and then SMART keeps the cursor in the uper left corner of the screen searching the ground for a bank teller.

Coh3n

2009-11-25 15:44:58

Okay thanks. The next version will work a lot better. :smile:

Script Updated!

Version 2.1

Added Oak cutting and banking.
When minimized, the script will now show how many logs you've cut in the taskbar.
Added which tree you're cutting to the progress report.
Improved banking significantly. There's no reason why it should fail now.
Improved tree finding, and if it's cut down detection.
Will relocate if lost within the woods when cutting Oaks.

Bugs:

As there are a lot of normal trees around the Oaks, the mouse will hover over the normal trees if an Oak tree can't be found. This is because the colors are almost exactly the same.

Ultra

2009-11-25 18:16:51

Walking is mostly blind clicking :\, may wanna use something with with the water there…

Nava2

2009-11-25 19:03:13

From: Ultra
Walking is mostly blind clicking :\, may wanna use something with with the water there…

I tried to convince him of this.. but when the minimap is set to perfect north, really.. why bother? If it works, it won't hurt.

Coh3n

2009-11-25 20:27:33

From: Nava2
I tried to convince him of this.. but when the minimap is set to perfect north, really.. why bother? If it works, it won't hurt.

That was the idea. It doesn't even have to be set to perfect north, as long as it can find the trees, it doesn't matter. The only reason I decided to use MouseBox was because I was getting so frustrated trying to make a good AutoColoring functions and such.

However, if I were to DDTMs/RadialWalking, I would still have the compass point north for accuracy purposes. It's also a very small distance to walk on the minimap, so why not use something that will work 99% of the time, instead of relying on color finding?

I'm sure you get my point. ;)

Bad Processor

2009-11-27 15:38:06

Waw! This script is very reliable, and is running smoothly at the moment.
Not got a proggy at the moment (still running) but I trust it won't crash.
Good work! I'm glad to have a nice, reliable cutter.

– BP

Coh3n

2009-11-27 16:09:24

From: Bad Processor
Waw! This script is very reliable, and is running smoothly at the moment.
Not got a proggy at the moment (still running) but I trust it won't crash.
Good work! I'm glad to have a nice, reliable cutter.

– BP

Thanks very much, I'm glad you like it. It's definitely improved since I released the original version. ;)

Ultra

2009-11-27 18:25:02

You could rely on color and if it fails use blind clicking.

sk80rdie76

2009-11-27 21:05:05


[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================= V.2.1 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 56 Minutes and 6 Seconds                 ]
[      Loads Done: 38                                             ]
[      Logs Chopped: 1064                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 71820                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]

n33d scripts

2009-11-28 04:00:01

after a while when im using it, it gets stuck under the bank and thinks the rock is the bank man..

Coh3n

2009-11-28 10:11:27

From: Ultra
You could rely on color and if it fails use blind clicking.

Yeah you're right.

From: sk80rdie76
[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 1 Hours, 56 Minutes and 6 Seconds ]
[ Loads Done: 38 ]
[ Logs Chopped: 1064 ]
[ Levels Gained: 0 ]
[ Exp Gained: 71820 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[/PHP]

Nice! :smile: Do you know why it stopped?

From: n33d scripts
after a while when im using it, it gets stuck under the bank and thinks the rock is the bank man..

Knowing which logs you're cutting would be very helpful in this situation.

sk80rdie76

2009-11-28 11:53:11

From: Coh3n

Nice! :smile: Do you know why it stopped?

manually stopped

Coh3n

2009-11-28 15:33:47

From: sk80rdie76
manually stopped

Even better! :biggrin:

n33d scripts

2009-11-28 19:54:45

sorry it was willows.

Coh3n

2009-11-28 20:05:16

From: n33d scripts
sorry it was willows.

Don't worry, and thanks. You said this happened after a while? How long? And was it just south of the bank, did it still manage to bank the logs?

Bad Processor

2009-11-29 04:04:16

Hmm…. SmartColors.scar doesn't exist?
BTW: The Non-smart version still uses smart, I see.

– BP

Coh3n

2009-11-29 10:20:59

Do you mean you're getting that SmartColors error, or I don't have it in my script?

And the SMART functions are just commented out. They don't actually get used.

gelloxor

2009-11-29 18:16:06

** Warning in Setup_Player: You need at least 30 in Woodcutting to cut Willows. **

I wanted to cut Oaks :(

Coh3n

2009-11-29 18:48:48

Wow I am very sorry. I completely forgot to take that part out when I added Oaks. :duh: I'll fix that asap. If you can't wait, you can remove that whole part yourself. ;)

gelloxor

2009-11-30 07:46:47

From: Coh3n
Wow I am very sorry. I completely forgot to take that part out when I added Oaks. :duh: I'll fix that asap. If you can't wait, you can remove that whole part yourself. ;)

Hehe, well just wanted to info about it :D Ill try this later on.

Sgt Soul

2009-11-30 08:44:24

is the newest version of this script still using SCAR dev 3.21, or has it moved onto 3.22, due to 3.21 not having the scar file 'SmartColors.scar'?

Many Thanks
-Sgt Soul-

EDIT: I removed the line containing SmartColors.scar, works perfectly will process a proggy by tomorrow :)

EDIT: I feel that the banking procedure is rushed (not as in your coding) but the banking of the logs then going back to the trees. There is literally no room for lag, for example if I just put my logs in the bank it will decide I have another full load if there is lag between closing the bank and running to the trees. Also by this happening it will go back to the bank and try to bank another load of logs but since they have already been banked the message:

** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **

Will be spammed. In conclusion I feel that there should be a failsafe if something like this were to happen again

Many Thanks
-Sgt Soul-

gelloxor

2009-11-30 08:49:43

Well its now working on Oaks, but it cuts sometimes normal tree too, and it wont drop/bank those logs :P

ill post the report later on.

EDIT: Here we go

** Warning in Walk_ToFrom: Error Radial Walking: Walk_OaksToBank[1]. **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.1 =============================]
[ ]
[ You have chosen to cut Oak trees. ]
[ ]
[ Ran For: 15 Minutes and 52 Seconds ]
[ Loads Done: 2 ]
[ Logs Chopped: 56 ]
[ Levels Gained: 1 ]
[ Exp Gained: 3780 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]

Why does it try to change player when I have "HowManyPlayers := 1;" ??

Coh3n

2009-11-30 15:24:54

From: gelloxor
Hehe, well just wanted to info about it :D Ill try this later on.

I'm working on the next version now, I'll be able to upload later tonight. :smile:

From: sgt soul
is the newest version of this script still using SCAR dev 3.21, or has it moved onto 3.22, due to 3.21 not having the scar file 'SmartColors.scar'?

Many Thanks
-Sgt Soul-

EDIT: I removed the line containing SmartColors.scar, works perfectly will process a proggy by tomorrow :)

EDIT: I feel that the banking procedure is rushed (not as in your coding) but the banking of the logs then going back to the trees. There is literally no room for lag, for example if I just put my logs in the bank it will decide I have another full load if there is lag between closing the bank and running to the trees. Also by this happening it will go back to the bank and try to bank another load of logs but since they have already been banked the message:

** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **
** Warning in Bank_Logs: Error Finding DTM: 'Willow'. **

Will be spammed. In conclusion I feel that there should be a failsafe if something like this were to happen again

Many Thanks
-Sgt Soul-

Awesome feedback! I really appreciate it. :smile: And yes, you need SCAR 3.22, I forgot to change that in the first post. Thanks for pointing that out. Also, good idea about the lag failsafes, I'll add that in wherever I can in the next version. I guess because my computer almost never lags, I never ran into that problem when testing the script. I'm glad you pointed that out.

From: gelloxor
Why does it try to change player when I have "HowManyPlayers := 1;" ??

Where does it try to change players? If you're talking about the 'Next_Player' thing, that's just the name of the function in my script. If you have only one player, it will end the script.

Also, since it said that the Radial Walking failed, that gave me another idea for a failsafe when walking back to the bank from the Oak trees. :smile:

Again, many thanks,

Coh3n

gelloxor

2009-11-30 19:32:55

Where does it try to change players? If you're talking about the 'Next_Player' thing, that's just the name of the function in my script. If you have only one player, it will end the script.

Also, since it said that the Radial Walking failed, that gave me another idea for a failsafe when walking back to the bank from the Oak trees. :smile:

Again, many thanks,

Coh3n

Seems like its cause of that walking error, and it logs out at the oaks.

Sgt Soul

2009-11-30 20:10:10

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 4 Hours, 31 Minutes and 11 Seconds ]
[ Loads Done: 85 ]
[ Logs Chopped: 2380 ]
[ Levels Gained: 0 ]
[ Exp Gained: 160650 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]

Worked pretty perfectly other than that one lag spike (due to wireless).
I loved the anti-ban's you have put in, they are very realistic.

Many Thanks
-Sgt Soul-

Coh3n

2009-11-30 21:24:40

From: sgt soul

Worked pretty perfectly other than that one lag spike (due to wireless).
I loved the anti-ban's you have put in, they are very realistic.

Many Thanks
-Sgt Soul-

That's awesome, I'm glad it worked well for you, and thanks for the compliments! :biggrin:

From: gelloxor
Seems like its cause of that walking error, and it logs out at the oaks.

Yes, this is because the first RadialWalk to the bank failes. I should have a failsafe added to V.2.3. :smile:
____________________________________________________________

To everyone else:

If you have the latest version of the Dev SVN Repository, you may have gotten a duplicate identifier error because my RadialWalkTolerance function was added to SRL. Download V.2.2 for the fix, plus another fixed bug (check the first post for details).

Thanks,

Coh3n

Sgt Soul

2009-11-30 23:17:24

[============================= V.2.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 2 Hours, 7 Minutes and 37 Seconds ]
[ Loads Done: 42 ]
[ Logs Chopped: 1176 ]
[ Levels Gained: 0 ]
[ Exp Gained: 79380 ]
[ Breaks: 0 ]
[ ]
[=================================================================]

Worked perfectly, Stopped becus I opened the SMART screen to much so it blacked out. My bad ;)

Many Thanks
-Sgt Soul-

sk80rdie76

2009-11-30 23:17:32


[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================= V.2.1 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 47 Minutes and 22 Seconds                ]
[      Loads Done: 30                                             ]
[      Logs Chopped: 840                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 56700                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[        Thank-you for using Coh3n's Draynor Chop N' Bank!        ]
[=================================================================]
[  Be sure to post your progress reports at VillaVu/SRL-Forums!   ]
[=================================================================]

stopped it because it was standing below the bank with a full inv, not doing anything

Sgt Soul

2009-12-01 04:22:57

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 4 Hours, 52 Minutes and 41 Seconds ]
[ Loads Done: 97 ]
[ Logs Chopped: 2716 ]
[ Levels Gained: 0 ]
[ Exp Gained: 183330 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]

Worked perfectly. Stopped at random event :)

EDIT: Another queiry here ;)
Considering the script doesn't log you out if it cannot find the willows (even after 4 hours) I believe there should be a fix so after a certain whether it be 5-10 mins where willows can't be found it logs out. Otherwise the account looks a little sus sitting there for 4 hours. not that it happened to me -.- hehe.

[============================= V.2.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 4 Hours, 2 Minutes and 18 Seconds ]
[ Loads Done: 9 ]
[ Logs Chopped: 252 ]
[ Levels Gained: 0 ]
[ Exp Gained: 17010 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
SOLID PROGGY :P

gelloxor

2009-12-01 12:33:44

Failed when compiling
Line 672: [Error] (22670:4): Unknown identifier 'RadialWalkTolerance' in script Chop N' Bank [V.2.2] by Coh3n.scar

Coh3n

2009-12-01 15:28:23

From: sgt soul
[============================= V.2.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 2 Hours, 7 Minutes and 37 Seconds ]
[ Loads Done: 42 ]
[ Logs Chopped: 1176 ]
[ Levels Gained: 0 ]
[ Exp Gained: 79380 ]
[ Breaks: 0 ]
[ ]
[=================================================================]

Worked perfectly, Stopped becus I opened the SMART screen to much so it blacked out. My bad ;)

Many Thanks
-Sgt Soul-

Still not a bad proggy. ;)

From: sk80rdie76
stopped it because it was standing below the bank with a full inv, not doing anything

Hmm, that shouldn't happen, but I have an idea on how to fix it for the next version. Are you the same person this happened to before? Has anyone else had this problem? Also, if you could get me what the debug box says, it would be very helpful. I have a failsafe in there that's suppose to click the bank symbol if it can't open the bank, and then try again. I would like to know if it performs this action or not.

From: sgt soul

EDIT: Another queiry here ;)
Considering the script doesn't log you out if it cannot find the willows (even after 4 hours) I believe there should be a fix so after a certain whether it be 5-10 mins where willows can't be found it logs out. Otherwise the account looks a little sus sitting there for 4 hours. not that it happened to me -.- hehe.

You're first one was awesome! :biggrin: As for you problem, did it say in the debug box that it couldn't find the trees? And, it didn't stay logged in for four hours, did it?

EDIT: @sgt soul - Where was it when it couldn't find the trees? Also, I'm glad you told me, because I know where I can add in a failsafe where it WILL log out if it can't find the trees after a certain amount of times.

From: gelloxor
Failed when compiling
Line 672: [Error] (22670:4): Unknown identifier 'RadialWalkTolerance' in script Chop N' Bank [V.2.2] by Coh3n.scar

Update to the latest Dev SVN.

Alek000

2009-12-01 17:02:55

Just tried to run it and got this error

Failed when compiling
Line 51: [Error] (384:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Users\Trey Sturgeon\Desktop\scarprerelease\includes\SRL\SRL\Core\Math.scar

I just updated to SCAR 2.33 but not sure if that has anything to do with it.

Coh3n

2009-12-01 17:04:44

Since you just updated, you need to move your plugins. ;)

Alek000

2009-12-01 17:05:44

From: Coh3n
Since you just updated, you need to move your plugins. ;)

Crap… I knew I was forgetting something. Thanks for the fast reply and sorry for the pointless post. Guess I should be more careful next time.

Coh3n

2009-12-01 17:07:33

Lol no problem and don't be sorry. Believe me, you aren't the first person to forget to move their plugins :tongue:

Alek000

2009-12-01 17:29:05

[========================================================]
[ Coh3n's Draynor Chop N' Bank!
[=============================V.2.2=======================]
[
[ You have chosen to cut Willow trees.
[
[ Ran For: 10 Minutes and 9 Seconds
[ Loads Done: 3
[ Logs Chopped: 84
[ Levels Gained: 0
[ Exp Gained: 5670
[ Breaks: 0
[
[========================================================]

Couldn't run it long, have stuff I have to do. But runs great so far. Good job Coh3n.

Sgt Soul

2009-12-01 20:59:44

If you still would like to know, where I was, it was just below the willows sitting at the water front :)

Rellann

2009-12-01 22:14:15

There was an instance where the screen was spinning in circles (could have been normal, but it seemed like it shouldn't of been going as long as it was) so I stepped in to stop it and it resumed just fine.

Other than that, so far flawless and fast. Maybe add a option to play a noise when a random appears. I love having that so I can personally watch and make sure it's done right.

[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.2 =============================]
[ ]
[ You have chosen to cut willow trees. ]
[ ]
[ Ran For: 33 Minutes and 19 Seconds ]
[ Loads Done: 4 ]
[ Logs Chopped: 112 ]
[ Levels Gained: 1 ]
[ Exp Gained: 7560 ]
[ Breaks: 0 ]
[ ]
[=================================================================][/php]

——–

[PHP]Checking For Random Events …
Sucessfully Banked Logs!
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.2 =============================]
[ ]
[ You have chosen to cut willow trees. ]
[ ]
[ Ran For: 1 Hours, 4 Minutes and 51 Seconds ]
[ Loads Done: 8 ]
[ Logs Chopped: 224 ]
[ Levels Gained: 1 ]
[ Exp Gained: 15120 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
Taking a 15 minute break.[/PHP]

Coh3n

2009-12-01 22:42:43

From: Alek000

Couldn't run it long, have stuff I have to do. But runs great so far. Good job Coh3n.

Thanks very much, I appreciate the compliment. :smile:

From: sgt soul
If you still would like to know, where I was, it was just below the willows sitting at the water front :)

It was south of the Willows? I wonder how that happened …

It just gave me another idea for a failsafe though. :smile:

From: Pat Jacks
There was an instance where the screen was spinning in circles (could have been normal, but it seemed like it shouldn't of been going as long as it was) so I stepped in to stop it and it resumed just fine.

No, that isn't normal. I don't think there's a command in my script where the compass moves. I have no idea what could have caused that problem. :confused:

From: Pat Jacks
Other than that, so far flawless and fast. Maybe add a option to play a noise when a random appears. I love having that so I can personally watch and make sure it's done right.

I really like that idea, actually. If I can figure out how to do it right, that would be very effective for people like you. :smile: Thanks for that suggestion.

Rellann

2009-12-01 22:53:09

I really like that idea, actually. If I can figure out how to do it right, that would be very effective for people like you. Thanks for that suggestion.

I saw the code for it in another script. I'll look for it in a second, wasn't too sure if it worked or not. Maybe have the option for a OS beep and a hardware beep.

*Update

Ok the sound is from Rune Crafter Reborn, look it up.

" PlayRandomSound = True; //Plays sound when a random is found."

Coh3n

2009-12-01 23:08:21

From: Pat Jacks
I saw the code for it in another script. I'll look for it in a second, wasn't too sure if it worked or not. Maybe have the option for a OS beep and a hardware beep.

Yeah, thanks exactly what I was thinking.

Rellann

2009-12-01 23:42:25

Aww I got stuck scanning a rock trying to get back to the bank =)

[php]Couldn't find the bank. Exiting
Couldn't find the bank. Exiting
** Warning in Bank_Logs: Error Opening Bank … Retrying … **
** Warning in Bank_Logs: Error Finding Bank Window. **
Couldn't find the bank. Exiting
** Warning in Bank_Logs: Error Finding Bank Window. **
Couldn't find the bank. Exiting
Couldn't find the bank. Exiting
** Warning in Bank_Logs: Error Opening Bank … Retrying … **
** Warning in Bank_Logs: Error Finding Bank Window. **
** Warning in Bank_Logs: Error Finding Bank Window. **
** Warning in Bank_Logs: Error Finding Bank Window. **[/php]

This is my first run.

[php]Couldn't find the bank. Exiting
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.2 =============================]
[ ]
[ You have chosen to cut willow trees. ]
[ ]
[ Ran For: 2 Hours, 9 Minutes and 41 Seconds ]
[ Loads Done: 12 ]
[ Logs Chopped: 336 ]
[ Levels Gained: 2 ]
[ Exp Gained: 22680 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================][/php]

Coh3n

2009-12-01 23:45:20

How the hell did it end up there when it was trying to go to the bank? Can you scroll up in the debug box?

Rellann

2009-12-02 00:00:36

=( Just cleared it.

Coh3n

2009-12-02 00:01:43

From: Pat Jacks
=( Just cleared it.

Ah alright, don't worry. When I update the script, I'm tweaking the walking anyway, so hopefully it will get fixed.

Rellann

2009-12-02 00:06:42

Oh yeah I love how when you level up it'll click the skill and wait on it for a second.

Coh3n

2009-12-02 00:14:13

From: Pat Jacks
Oh yeah I love how when you level up it'll click the skill and wait on it for a second.

I'm glad that works. I've never had anyone actually give me feedback on that part, so I thank you. :tongue:

gelloxor

2009-12-02 10:57:46

** Warning in Walk_ToFrom: Error Radial Walking: Walk_BankToOaks. **

hmm still have this? have any1 else tried it with oaks? updated scar,srl and moved plugins… :l

magixboy

2009-12-02 11:37:57

This was tested like a week ago.

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.1.9 =============================]
[ ]
[ Ran For: 6 Hours, 40 Minutes and 45 Seconds ]
[ Loads Done: 29 ]
[ Logs Chopped: 811 ]
[ Levels Gained: 0 ]
[ Exp Gained: 54742.5 ]
[ Breaks: 3 ]
[ ]
[=================================================================]
[ Thank-You for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Successfully executed

For the v2.2, I can't seem to run it coz I dun have SmartColours.
Where can i get it?

Coh3n

2009-12-02 13:59:00

From: gelloxor
** Warning in Walk_ToFrom: Error Radial Walking: Walk_BankToOaks. **

hmm still have this? have any1 else tried it with oaks? updated scar,srl and moved plugins… :l

Does that happen every time for you? It seems to work fine when I test it. :confused:

From: magixboy

For the v2.2, I can't seem to run it coz I dun have SmartColours.
Where can i get it?

Update your SRL to the latest Dev SVN.

gelloxor

2009-12-02 16:53:54

From: Coh3n
Does that happen every time for you? It seems to work fine when I test it. :confused:

yeah it seems so :l

With willows, it seems to work fine. lets see.

How about that break timer? if i put 20min is it exactly 20min or +/- something?

Sgt Soul

2009-12-02 18:53:39

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 8 Hours, 4 Minutes and 30 Seconds ]
[ Loads Done: 97 ]
[ Logs Chopped: 2716 ]
[ Levels Gained: 0 ]
[ Exp Gained: 183330 ]
[ Breaks: 1 ]
[ ]
[=================================================================]

Seemed to get stuck on bank screen :S

Still a good proggy, THX :)

Rellann

2009-12-02 20:40:04

Failed on a random.

[php]Checking For Random Events …
Checking For Random Events …
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Tree has been cut down!
Checking For Random Events …
Checking For Random Events …
Tree has been cut down![/php]

Coh3n

2009-12-02 21:06:05

From: gelloxor
yeah it seems so :l

With willows, it seems to work fine. lets see.

How about that break timer? if i put 20min is it exactly 20min or +/- something?

That's weird. I don't know what to tell you. It works perfectly fine for me. And it will be around 20 minutes, not exactly.

From: sgt soul
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 8 Hours, 4 Minutes and 30 Seconds ]
[ Loads Done: 97 ]
[ Logs Chopped: 2716 ]
[ Levels Gained: 0 ]
[ Exp Gained: 183330 ]
[ Breaks: 1 ]
[ ]
[=================================================================]

Seemed to get stuck on bank screen :S

Still a good proggy, THX :)

Yeah still good. What was it doing when it got stuck? Like what did the mouse do? Or did you not see?

From: Pat Jacks
Failed on a random.

That weird, I don't know why SRL wouldn't detect that random. The script did check for it. Odd.
_______________

Oh, the script was updated guys, I forgot to post about it. ;)

Alek000

2009-12-02 23:50:32

Is there something wrong with SMART? Everytime I use your script it won't start SMART. I did uncomment the SMART portion of the setup too btw. It doesn't throw any errors or anything it just sits there and if it see's colors close to what would be used to login it moves the mouse. Does this happen with you?

Coh3n

2009-12-02 23:58:03

From: Alek000
Is there something wrong with SMART? Everytime I use your script it won't start SMART. I did uncomment the SMART portion of the setup too btw. It doesn't throw any errors or anything it just sits there and if it see's colors close to what would be used to login it moves the mouse. Does this happen with you?

That's part of the reason I commented out the SMART. SMART doesn't work at all for me, with any script. Some people who use this, still use SMART. I have no idea what is wrong with mine, and apparently you're having a similar problem. Sorry. :confused:

chris17

2009-12-03 00:03:46

I dont get the problem..

i get the identifier radialwalktolerance error and i have the latest rev and everything is up to date.. any ideas?

Coh3n

2009-12-03 00:06:52

From: chris17
I dont get the problem..

i get the identifier radialwalktolerance error and i have the latest rev and everything is up to date.. any ideas?

You may have the latest SRL Revision, but you don't have the latest Dev revision. Refer to this guide to get it setup properly. The Dev revision is just a way to get the more up-to-date functions and procedures without having to wait for the SRL Revisions.

chris17

2009-12-03 00:08:04

yea thanks for the clear up.. it was the problem and thanks for the clarification.. nice script! ill update with errors or updates

Coh3n

2009-12-03 00:14:59

From: chris17
yea thanks for the clear up.. it was the problem and thanks for the clarification.. nice script! ill update with errors or updates

Awesome, glad you got it worked out. :smile:

chris17

2009-12-03 00:26:19

yea now im just having the same smart error… it wont open for me at all and the mouse does the same thing as the person mentioned about.. i tried removing the smart portion and try it normalled but it doesnt work

Coh3n

2009-12-03 00:28:52

From: chris17
yea now im just having the same smart error… it wont open for me at all and the mouse does the same thing as the person mentioned about.. i tried removing the smart portion and try it normalled but it doesnt work

Did you drag the crosshairs when you removed SMART?

gelloxor

2009-12-03 03:16:30

Willows works fine!!

Cut desired number of logs, logging out.
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.2 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 3 Hours, 48 Minutes and 39 Seconds ]
[ Loads Done: 37 ]
[ Logs Chopped: 1009 ]
[ Levels Gained: 4 ]
[ Exp Gained: 68107,5 ]
[ Breaks: 8 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Successfully executed

Darn i forgot to put more logs :D

But it works damn good!

magixboy

2009-12-03 04:32:40

I have the latest SRL Revision & latest Dev revision. But i still get the identifier radialwalktolerance error.

What cow?

Coh3n

2009-12-03 09:53:11

From: gelloxor
Willows works fine!!

Cut desired number of logs, logging out.
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.2 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 3 Hours, 48 Minutes and 39 Seconds ]
[ Loads Done: 37 ]
[ Logs Chopped: 1009 ]
[ Levels Gained: 4 ]
[ Exp Gained: 68107,5 ]
[ Breaks: 8 ]
[ ]
[=================================================================]
[ Thank-you for using Coh3n's Draynor Chop N' Bank! ]
[=================================================================]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[=================================================================]
Successfully executed

Darn i forgot to put more logs :D

But it works damn good!

Very nice! I'm glad it worked well. :biggrin:

From: magixboy
I have the latest SRL Revision & latest Dev revision. But i still get the identifier radialwalktolerance error.

What cow?

You must have done something wrong. If you had the latest Dev SVN, you wouldn't get that error.

gelloxor

2009-12-03 11:34:07

any1 tried on members? i tried and it started fine from draynor bank to the trees,cutted them down came bank to bank but then said "cant find bank"

Does member worlds have somekind of diffrent colors? cause i had problems with POMS essence miner also when i tried on member.

Coh3n

2009-12-03 11:40:51

From: gelloxor
any1 tried on members? i tried and it started fine from draynor bank to the trees,cutted them down came bank to bank but then said "cant find bank"

Does member worlds have somekind of diffrent colors? cause i had problems with POMS essence miner also when i tried on member.

But it works fine for you on F2P? That's extremely weird. The colors should be the same, no matter what world you're in.

gelloxor

2009-12-03 12:07:58

From: Coh3n
But it works fine for you on F2P? That's extremely weird. The colors should be the same, no matter what world you're in.

okay, ill give it a another try later on.

Coh3n

2009-12-03 12:14:15

From: gelloxor
okay, ill give it a another try later on.

Okay. That's really weird that you have this problem. I've never heard of something like this before. :confused:

gelloxor

2009-12-04 10:13:12

From: Coh3n
Okay. That's really weird that you have this problem. I've never heard of something like this before. :confused:

Oh, it seems its cause of that RS update :P need to try it later

Death-Magnetic

2009-12-04 12:07:57

Is it any drop feature in this script?

Coh3n

2009-12-04 12:28:02

From: gelloxor
Oh, it seems its cause of that RS update :P need to try it later

The fonts are updated with the newest version of the SCAR Pre-Release, if you get it, everything should work.

From: Death-Magnetic
Is it any drop feature in this script?

No, but I have a PowerChopper in the FFA section that uses the same cutting procedures.

Death-Magnetic

2009-12-06 07:24:22

From: Coh3n

No, but I have a PowerChopper in the FFA section that uses the same cutting procedures.

Think I've used it before :D

ruthlesskiller

2009-12-06 10:03:01

I tried to run it and after it checks the stats i get this error : [Runtime Error] : Exception: Canvas does not allow drawing in line 429 in script C:\Users\Nicholas\Desktop\SCAR\includes\SRL\SRL\Core\GameTab.scar

Coh3n

2009-12-06 10:08:15

From: ruthlesskiller
I tried to run it and after it checks the stats i get this error : [Runtime Error] : Exception: Canvas does not allow drawing in line 429 in script C:\Users\Nicholas\Desktop\SCAR\includes\SRL\SRL\Core\GameTab.scar

I get that error sometimes too. Just restart SCAR, and it should work.

ruthlesskiller

2009-12-06 10:11:07

Oh, works now. Thanks (:

EDIT:: I found another problem, after cutting a full load, it goes to the bank and cannot find the bank window, it does right click properly sometimes but still continues searching.

Heavenguard

2009-12-06 13:43:31

Ill try it out Coh3n :D i never used a script before lol. Might as well try this out when Im not home. Ill update this post with progress reports after I figure out how to do that. + rep anyways, nice work, i see you put a lot of time and effort into this.

Coh3n

2009-12-06 16:44:37

From: ruthlesskiller
Oh, works now. Thanks (:

EDIT:: I found another problem, after cutting a full load, it goes to the bank and cannot find the bank window, it does right click properly sometimes but still continues searching.

If it right clicked properly, then that must be a problem when ChooseOption. Make sure you have the latest version of the Dev SVN and SCAR because I know the fonts were recently updated, so that may be the problem.

From: Heavenguard
Ill try it out Coh3n :D i never used a script before lol. Might as well try this out when Im not home. Ill update this post with progress reports after I figure out how to do that. + rep anyways, nice work, i see you put a lot of time and effort into this.

Haha thanks, I'm looking forward to your feedback. :smile:

gelloxor

2009-12-07 04:19:37

From: ruthlesskiller
Oh, works now. Thanks (:

EDIT:: I found another problem, after cutting a full load, it goes to the bank and cannot find the bank window, it does right click properly sometimes but still continues searching.

I have the same prob :l tried to update all things…

Coh3n

2009-12-08 15:25:36

From: gelloxor
I have the same prob :l tried to update all things…

Does it do this every time?

Cigue

2009-12-09 01:07:49

Just updated everything and tried a few times, here's what I get

Line 603: [Hint] (22044:1): Variable 'NEWCOLOR' never used in script C:\Program Files\SCAR 3.22\includes\srl\srl\Misc\SmartColors.scar
Line 603: [Hint] (22044:1): Variable 'CTS' never used in script C:\Program Files\SCAR 3.22\includes\srl\srl\Misc\SmartColors.scar
Line 766: [Error] (22765:46): Invalid number of parameters in script C:\Program Files\SCAR 3.22\Scripts\TonPénis\Woodcutting\Draynor Chop N' Bank [V.2.3] by Coh3n(2).scar

Coh3n

2009-12-09 11:25:46

From: Cigue
Just updated everything and tried a few times, here's what I get

Line 603: [Hint] (22044:1): Variable 'NEWCOLOR' never used in script C:\Program Files\SCAR 3.22\includes\srl\srl\Misc\SmartColors.scar
Line 603: [Hint] (22044:1): Variable 'CTS' never used in script C:\Program Files\SCAR 3.22\includes\srl\srl\Misc\SmartColors.scar
Line 766: [Error] (22765:46): Invalid number of parameters in script C:\Program Files\SCAR 3.22\Scripts\TonPénis\Woodcutting\Draynor Chop N' Bank [V.2.3] by Coh3n(2).scar

Thanks for bringing this to my attention. The IsMoving function in SRL was changed, which caused the 'Invalid number of parameters…'. I've uploaded Version 2.4.

Cheers,

Coh3n

kevinconklin

2009-12-09 12:17:47

that script made me restart my pc,it just started going crazy and it click on banners and then it re-arranged a bunch of folders on my pc, i was using scar 3.22, can you help me

Coh3n

2009-12-09 12:19:50

From: kevinconklin
that script made me restart my pc,it just started going crazy and it click on banners and then it re-arranged a bunch of folders on my pc, i was using scar 3.22, can you help me

You need SCAR 3.23, and make sure you remove the '//' before the SMART include. It's like the second line after the script header.

kevinconklin

2009-12-09 12:50:40

ok i got scar 3.23 and removed the // but when i click run it opens something else called smart.scar and i get this error when i run it:

Failed when compiling
Line 0: [Error] (55:37): 'BEGIN' expected in script D:\Users\Kevin\Desktop\scarprerelease\includes\srl\srl\Misc\Smart.scar
Failed when compiling
Line 1: [Error] (1:1): Unexpected end of file in script D:\Users\Kevin\Desktop\scarprerelease\includes\srl\srl\Misc\Smart.scar
Failed when compiling

Cigue

2009-12-09 14:02:36

From: Coh3n
Thanks for bringing this to my attention. The IsMoving function in SRL was changed, which caused the 'Invalid number of parameters…'. I've uploaded Version 2.4.

Cheers,

Coh3n

Glad I could help :D

Coh3n

2009-12-09 14:22:06

@Kevin - Did you move your plugins after installing 3.23?

Dervish

2009-12-09 16:20:17

It runs, finds willows, cuts a full load, walks to bank and just stands there.

:(

Coh3n

2009-12-09 16:22:38

From: Dr D. Dervish
It runs, finds willows, cuts a full load, walks to bank and just stands there.

:(

Really? Does the debug say anything? It uses the SRL bank functions, so I don't see why it wouldn't work.

klit rs

2009-12-09 16:24:55

I just tried to run it and this is what happened…

Include file C:\Program Files\SCAR 3.21\includes\srl\srl\Misc\SmartColors.scar does not exist.
Failed when compiling

What do I do?

YoHoJo

2009-12-09 16:25:13

From: Coh3n
I get that error sometimes too. Just restart SCAR, and it should work.

Another fix for that is to on SCAR do:
Client>Reset Specified Window.
And then drag the cross-hair to Runescape again.

klit rs

2009-12-09 16:30:17

From: YoHoJo
Another fix for that is to on SCAR do:
Client>Reset Specified Window.
And then drag the cross-hair to Runescape again.

What if I want to use SMART? I tried exiting out then opening it again and it gave me the same error… Include file C:\Program Files\SCAR 3.21\includes\srl\srl\Misc\SmartColors.scar does not exist.
Failed when compiling… What should I try now??

Dervish

2009-12-09 16:30:28

From: Coh3n
Really? Does the debug say anything? It uses the SRL bank functions, so I don't see why it wouldn't work.

Oh it might be because i'm on SCAR 3.22 ?

YoHoJo

2009-12-09 17:03:41

From: klit rs
What if I want to use SMART? I tried exiting out then opening it again and it gave me the same error… Include file C:\Program Files\SCAR 3.21\includes\srl\srl\Misc\SmartColors.scar does not exist.
Failed when compiling… What should I try now??

That's SmatColors, not SMART (two completely different things I believe)

Anyways, SmartColors is in the latest Dev SVN. So just update your SRL (If you have Dev version) and then you're all good.

If you don't have Dev SVN, read this guide on how to get it :
http://www.villavu.com/forum/showthread.php?t=47714

Coh3n

2009-12-09 20:24:03

From: Dr D. Dervish
Oh it might be because i'm on SCAR 3.22 ?

This script was testing with 3.23, so it's possible. AFAIK you need 3.23 for the updated fonts anyway.

scubajesus

2009-12-09 21:20:22

Kevin. Delete the comment before AND after {.Include srl\srl\Misc\Smart.scar}
That worked for me, but SMART didn't work, just moused around like the cursor thought it was on fire.

klit rs

2009-12-10 17:23:58

another error Im having with this script…. I just redownloaded SCAR witht he guide u sent me to with the link YoHoJo, and I got the SmartColors.scar file, but now I am getting this error when I try to start the script…
Line 0: [Error] (55:37): 'BEGIN' expected in script C:\Users\Owner\Desktop\SCAR\includes\srl\srl\Misc\Smart.scar
And it opens the Smart.scar file… I tried adding begin to the beginning, but it didnt work still…. what do I do?

kevinconklin

2009-12-10 17:33:54

From: Coh3n
@Kevin - Did you move your plugins after installing 3.23?

i did move them, i followed ur guide, i dont know what is going on. is all of this windows 7 compatible

kevinconklin

2009-12-10 17:36:10

is all of this windows 7 compatible?

Coh3n

2009-12-10 17:53:17

From: klit rs
another error Im having with this script…. I just redownloaded SCAR witht he guide u sent me to with the link YoHoJo, and I got the SmartColors.scar file, but now I am getting this error when I try to start the script…
Line 0: [Error] (55:37): 'BEGIN' expected in script C:\Users\Owner\Desktop\SCAR\includes\srl\srl\Misc\Smart.scar
And it opens the Smart.scar file… I tried adding begin to the beginning, but it didnt work still…. what do I do?

I don't know what to tell you. I don't know what would cause that error. I don't get any such error. The only thing I can think of is that you made an error when you were setting up SCAR.

@Kevin, try not to double post. And yes, as far as I know, everything should work fine on Windows 7. I don't know why you would be getting that error. Sorry.

HayHay89

2009-12-14 02:40:27

Running as we speak Expect a fairly good proggy for a single playa if no randoms etc

sk80rdie76

2009-12-15 22:56:33

From: klit rs
another error Im having with this script…. I just redownloaded SCAR witht he guide u sent me to with the link YoHoJo, and I got the SmartColors.scar file, but now I am getting this error when I try to start the script…
Line 0: [Error] (55:37): 'BEGIN' expected in script C:\Users\Owner\Desktop\SCAR\includes\srl\srl\Misc\Smart.scar
And it opens the Smart.scar file… I tried adding begin to the beginning, but it didnt work still…. what do I do?

i'm getting the same error….not sure why

Dub

2009-12-16 10:46:03

From: sk80rdie76
i'm getting the same error….not sure why

You must've somehow (incidentally) screwed around with the code you shouldn't screw around with. Either there's an END too much or a begin too little. Upload your chopper script and let me take a look at it :)?

Coh3n

2009-12-16 11:13:41

From: sk80rdie76
i'm getting the same error….not sure why

I can't see why anyone would get an error like this, except for what Dub said. If you have the latest Dev SVN, and the latest version of SCAR, it should work just fine. Also, make sure you've moved your plugins.

sk80rdie76

2009-12-16 16:48:13

From: Dub
You must've somehow (incidentally) screwed around with the code you shouldn't screw around with. Either there's an END too much or a begin too little. Upload your chopper script and let me take a look at it :)?

From: Coh3n
I can't see why anyone would get an error like this, except for what Dub said. If you have the latest Dev SVN, and the latest version of SCAR, it should work just fine. Also, make sure you've moved your plugins.

i didnt mess around with anything..i even redownloaded the script.

i have the latest everything, this is the only script giving me a problem

Coh3n

2009-12-21 12:09:47

From: sk80rdie76
i have the latest everything, this is the only script giving me a problem

Okay, I read that a couple other people were having this problem in the past. Is there anyone else still getting this error? I'll try to look more into it tomorrow if I get time. I have a few other projects I need to finish + some real life things (Christmas time, you know ;)).

lelle

2009-12-22 04:44:27

I'm getting the same error too :(

Line 0: [Error] (55:37): 'BEGIN' expected in script C:\Users\Owner\Desktop\SCAR\includes\srl\srl\Misc\ Smart.scar

bbri06

2009-12-22 06:36:02

From: lelle
I'm getting the same error too :(

Line 0: [Error] (55:37): 'BEGIN' expected in script C:\Users\Owner\Desktop\SCAR\includes\srl\srl\Misc\ Smart.scar

To everyone getting this error, the problem is when you remove the comment marks for the smart include, you have to add comment marks before the little message after the include. Although it doesn't really matter since the script will error anyways as uptext isn't working.

so you have to do


{.Include srl\srl\Misc\Smart.scar}  //<-- Remove the '//' to use SMART!

Coh3n

2009-12-22 14:46:19

From: bbri06
To everyone getting this error, the problem is when you remove the comment marks for the smart include, you have to add comment marks before the little message after the include. Although it doesn't really matter since the script will error anyways as uptext isn't working.

Thanks very much for pointing this out.

I have uploaded a fixed version. No one should get that SMART error anymore.

Happy holidays!

Coh3n

bbri06

2009-12-22 15:11:16

No problem. Can't wait to try this out once uptext is working again.

Coh3n

2009-12-22 15:13:30

From: bbri06
No problem. Can't wait to try this out once uptext is working again.

I'm working on a temporary alternative right now. Hopefully I can get it working well. :)

OzzyStoned

2009-12-26 11:24:13

OH NoezZ! treezz nawt found :(

SRL Compiled in 0 msec
SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.

Creating the NickTPA.
Current Woodcutting Level: 49.
Found Hatchet!
We have arrived at the Willow trees!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
edit:
read some comment realized something so when will uptext be back up?

Coh3n

2009-12-26 13:43:16

From: OzzyStoned
OH NoezZ! treezz nawt found :(

SRL Compiled in 0 msec
SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.

Creating the NickTPA.
Current Woodcutting Level: 49.
Found Hatchet!
We have arrived at the Willow trees!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
edit:
read some comment realized something so when will uptext be back up?

I wouldn't expect the uptexts to me working again for some time. I have an alternative I'm going to test right now. If all goes well, I'll be able to upload an updated version that should work. :)

bangali

2009-12-26 14:31:35

coh3n you still updating your powerchopper…lol it goes haywire and clicks on the path and never cuts trees or are you updating this only ? ty

Coh3n

2009-12-26 14:56:29

From: bangali
coh3n you still updating your powerchopper…lol it goes haywire and clicks on the path and never cuts trees or are you updating this only ? ty

It doesn't cut the trees because it's not finding the proper uptext. Unfortunately I've tried several different methods, and none have proven to work well at all. I wouldn't expect this (or my Powerchopper) to work properly until the uptexts are fixed.

My apologies.

bbri06

2009-12-26 15:45:51

I suggest you just right click the trees and use OptionsExist; while uptext is down. I've found this is actually rather effective as my TPAs rarely miss the location of a tree.

Coh3n

2009-12-26 16:55:44

From: bbri06
I suggest you just right click the trees and use OptionsExist; while uptext is down. I've found this is actually rather effective as my TPAs rarely miss the location of a tree.

That's actually not a bad idea. I'm going to mess around with that now. Thanks very much! :)

bangali

2009-12-26 17:10:37

so coh3n are you gonna post a new one if that works and update both and no probs, you dont need to apologize to any1 cause at least your making scripts and do you still use scar atm or are all scripts down due to updates. ty

Coh3n

2009-12-26 17:12:29

From: bangali
so coh3n are you gonna post a new one if that works and update both and no probs, you dont need to apologize to any1 cause at least your making scripts and do you still use scar atm or are all scripts down due to updates. ty

As far as I know most script don't work. However, there are a few (I don't know exactly which ones) that do work.

I'm working on it now, and if I can get it to work, I'll post an updated version of both this script, and my Powerchopper. :)

Cheers,

Coh3n

EDIT: Check the first post for an updated script.

kdj55

2009-12-27 13:59:37

Failed when compiling
Line 270: [Error] (15642:1): Invalid number of parameters in script C:\Documents and Settings\Owner\Desktop\scarprerelease\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

Yeah.. I get that when i run every script including yours. I have everything up to date but idk whats wrong.

bangali

2009-12-28 07:51:12

From: kdj55
Failed when compiling
Line 270: [Error] (15642:1): Invalid number of parameters in script C:\Documents and Settings\Owner\Desktop\scarprerelease\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

Yeah.. I get that when i run every script including yours. I have everything up to date but idk whats wrong.

Update your srl again and make sure its properly installed…i updsated srl again

also, coh3n i get your script to run but it goes to graphic settings and i got standard already so it hovers over it then goes to cross but doesnt click it then it goes to graphics again..etc and never finishes then if i move it , it goes to corner of screen

btw..your script doesnt stop when you hit the stop for scar and it carries on unlike others

Ty

Coh3n

2009-12-28 11:00:44

From: bangali
Update your srl again and make sure its properly installed…i updsated srl again

also, coh3n i get your script to run but it goes to graphic settings and i got standard already so it hovers over it then goes to cross but doesnt click it then it goes to graphics again..etc and never finishes then if i move it , it goes to corner of screen

btw..your script doesnt stop when you hit the stop for scar and it carries on unlike others

Ty

The Sandwich.scar issue has been fixed in the latest dev revision. Bangali, that graphics problem is occurring because it's not reading the uptext when it goes to close the window. Either start your character logged out, or get the latest version of scarprerelease. Freddy has written a new uptext algorithm. I haven't tested, but if it works, I'll change the script back to work with uptexts.

As for the stopping of the script, I've never had that problem. Do you have multiply SCAR windows open?

Coh3n

2009-12-28 14:49:38

Sorry for double post, but this is going to be a detailed post about the new updated version, and I want to make it obvious for everyone. :)

Script Updated!

A few things you should know about V.2.7:

You need SCAR 3.23 Beta. This is obtained by doing an SVN checkout. Refer to this guide if you need help with setting it up.
I have made it really obvious where you are to setup the script, so there shouldn't be any problems in this area.
You have my word that this version works better than any version I have previously released. To work at it's full potential, I highly suggest using it without SMART.

Here is a progress report I got earlier today. This was used without SMART, and I stopped it manually, so I could release it for you guys.
[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.7 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 16 Minutes and 46 Seconds ]
[ Loads Done: 5 ]
[ Logs Chopped: 140 ]
[ Levels Gained: 0 ]
[ Exp Gained: 9450 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

Bug Reporting:

From now on, I would really appreciate it if when/if you encounter any bugs with the script, that you post with the following template:


Script Version:

Trees Being Cut:

Player Location:

Debug Box Info.:

Progress Report:

That's all for now, enjoy the script, and feedback is always appreciated.

Happy holidays,

Coh3n

bangali

2009-12-28 17:51:10

its the latest script and i used logged out as you said
check graphics , logged in checked everything and i was cutting oaks.
it hits the grey path at east then on dungeon. it looks for trees but says error cant find tree uptext and also….. the guards own you in that area so shouldnt it not go there.. im a low lvl 1 def lol so i got pwnt and had to run for it
ty

Coh3n

2009-12-29 16:48:30

From: bangali
its the latest script and i used logged out as you said
check graphics , logged in checked everything and i was cutting oaks.
it hits the grey path at east then on dungeon. it looks for trees but says error cant find tree uptext and also….. the guards own you in that area so shouldnt it not go there.. im a low lvl 1 def lol so i got pwnt and had to run for it
ty

Please use my Bug Report template next time. Also, that's the location it goes to to cut Oaks. You're getting attacked because you're combat level is too low. On your post in my Powerchopper you said you went back to SCAR 3.22. The uptexts don't work with that version, so that's why you were getting the uptext error.

Please read my previous post before posting errors. You'll find it helpful by simply reading around.

EDIT: Got this report today. Stopped because I was in the abyssal random.
[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.7 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 1 Hours, 30 Minutes and 36 Seconds ]
[ Loads Done: 26 ]
[ Logs Chopped: 728 ]
[ Levels Gained: 1 ]
[ Exp Gained: 49140 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

will6100

2009-12-30 11:13:40

Script Version: 2.7

Trees Being Cut: willow

Player Location: abyss (i think its abyss:P)

Debug Box Info.:** Warning in Chop_Trees: Couldn't find trees after 50 tries, logging out…**
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **

Progress Report:[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.7 =============================]
[ ]
[ You have chosen to cut willow trees. ]
[ ]
[ Ran For: 6 Hours, 35 Minutes and 18 Seconds ]
[ Loads Done: 111 ]
[ Logs Chopped: 3108 ]
[ Levels Gained: 2 ]
[ Exp Gained: 209790 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed

it worked well until i get an random :(

Coh3n

2009-12-30 12:42:48

@will: Very nice report, and thanks for using my template. :) I've added yours to the first page. Keep them coming. If your character is still in the abyss random, there are a couple people who need it to solve the random. PM Icefire/Naum if you're willing to let them use your account.

Also, I got this one last night also. It stopped in the beekeeper Random.
[PHP]

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.7 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 4 Hours, 43 Minutes and 6 Seconds ]
[ Loads Done: 67 ]
[ Logs Chopped: 1876 ]
[ Levels Gained: 0 ]
[ Exp Gained: 126630 ]
[ Breaks: 5 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

payton

2009-12-30 18:10:30

my problem does not fit in with your form for bugs but. when i use a hatched in the first inventory spot, it gets banked with the "bank all items" and then he stands at the willows and clicks on the trees.

script works great for the first load.

Payton

Coh3n

2009-12-30 18:13:02

From: payton
my problem does not fit in with your form for bugs but. when i use a hatched in the first inventory spot, it gets banked with the "bank all items" and then he stands at the willows and clicks on the trees.

script works great for the first load.

Payton

Oops! I set to to DepositAll without thinking about the people that don't equip the hatchet. I'll upload a new version right now. Thanks. :)

EDIT: Try the new version. :)

payton

2009-12-30 19:15:54

its working good.

[=================================================================]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.8 =============================]
[ ]
[ You have chosen to cut willow trees. ]
[ ]
[ Ran For: 32 Minutes and 36 Seconds ]
[ Loads Done: 8 ]
[ Logs Chopped: 216 ]
[ Levels Gained: 0 ]
[ Exp Gained: 14580 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.8 =============================]
[ ]
[ Ran For: 1 Hours, 3 Minutes and 8 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ 7 189 1 12757.5 1 ]
[ 9 243 2 16402.5 1 ]
[ ]
[=================================================================]
[=================================================================]

Coh3n

2009-12-30 22:12:31

Glad to hear it! :)

I'm going to start testing with Oaks. They're better money, and I want to see how well it works, as most people seem to be cutting Willows.

payton

2009-12-30 22:17:42

what combat level do you need to do the oaks where your script does?

Payton

Coh3n

2009-12-31 11:32:39

From: payton
what combat level do you need to do the oaks where your script does?

Payton

I don't know exactly, but I THINK your combat has to be 2x the Guard's combat + 2.

Script Updated!

Check the first post for a list of all the updates. There are a few. ;)

payton

2009-12-31 12:54:48

I let this run over night and it spent 6 hours on one account with the uptext error.

is there any way that it can stop its self if it repeatedly gets the uptext error?

Payton

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.8 =============================]
[ ]
[ Ran For: 7 Hours, 56 Minutes and 39 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ 9 243 0 16402.5 1 ]
[ 14 378 2 25515 1 ]
[ 2 54 1 3645 1 ]
[ ]
[=================================================================]
[=================================================================]

Coh3n

2009-12-31 12:58:13

It's suppose to stop if it can't find the uptext 50 times in a row. What trees were you cutting? I forgot to add that part to the multiplayer report.

payton

2009-12-31 15:41:31

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.9 =============================]
[ ]
[ Ran For: 1 Hours, 53 Minutes and 18 Seconds ]
[ ]
[ Nick — Loads — Logs — Lvls — Exp. — Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ 0 — 0 — 0 — 0 — 0 ]
[ 5 — 135 — 0 — 9112.5 — 1 ]
[ 4 — 108 — 2 — 7290 — 1 ]
[ 14 — 378 — 0 — 25515 — 1 ]
[ 4 — 108 — 0 — 7290 — 1 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed

Payton

will6100

2009-12-31 17:05:27

Got an error just like the sandwich lady one:/

debug box:
Line 267: [Error] (20119:1): Unknown identifier 'Pete_AnalyzeAnimal' in script C:\Users\Propriétaire\Desktop\scarprerelease\includes\SRL\SRL\Core\AntiRandoms\PrisonPete.scar

payton

2009-12-31 18:59:35

From: will6100
Got an error just like the sandwich lady one:/

debug box:
Line 267: [Error] (20119:1): Unknown identifier 'Pete_AnalyzeAnimal' in script C:\Users\Propriétaire\Desktop\scarprerelease\includes\SRL\SRL\Core\AntiRandoms\PrisonPete.scar

do you have scar 3.23? if you do then do a svn checkout on the srl folder. make sure scar is closed and reopened afterwards.

Payton

will6100

2009-12-31 23:10:07

From: payton
do you have scar 3.23? if you do then do a svn checkout on the srl folder. make sure scar is closed and reopened afterwards.

Payton

i have all the lastest stuff and moved plugins, it seems like the pete thing is not declared in the var

payton

2010-01-01 12:24:37

let this run over night but it only made it 4 hours and 20 min.
got about 2000 willows cut before my 3 players were in randoms. (2-maze, 1 demon/military guy)

apart from randoms this script works great

Payton

Coh3n

2010-01-01 13:20:38

From: will6100
Got an error just like the sandwich lady one:/

debug box:
Line 267: [Error] (20119:1): Unknown identifier 'Pete_AnalyzeAnimal' in script C:\Users\Propriétaire\Desktop\scarprerelease\includes\SRL\SRL\Core\AntiRandoms\PrisonPete.scar

I've only seen that error when people haven't moved they're plugins properly.

From: payton
let this run over night but it only made it 4 hours and 20 min.
got about 2000 willows cut before my 3 players were in randoms. (2-maze, 1 demon/military guy)

apart from randoms this script works great

Payton

Not bad, you don't happen to have that report? :p I'd like to add a good multiplayer report to the first post.

EDIT: I got this report when cutting Oak trees. It stopped because it got lost north of the jail.
[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.9 =============================]
[ ]
[ You have chosen to cut oak trees. ]
[ ]
[ Ran For: 57 Minutes and 33 Seconds ]
[ Loads Done: 15 ]
[ Logs Chopped: 408 ]
[ Levels Gained: 0 ]
[ Exp Gained: 27540 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

EDIT2: I updated the script. Just minor updates that don't effect the Willow part at all.

EpicProject

2010-01-01 20:21:06

Start in bank, gets to willows, then —> ** Warning in Chop_Tree: Error Finding Uptext. **

MylesMadness

2010-01-01 20:32:59

From: EpicProject
Start in bank, gets to willows, then —> ** Warning in Chop_Tree: Error Finding Uptext. **

You have to use dev scar and srl for scripts to work.

payton

2010-01-02 02:32:11

just ran great for me for ~6 hours and over 2100 willows.

found it sitting at the logon screen with this in the debug…

Checking For Random Events …
Tree has been cut down!
Checking For Random Events …
Checking For Random Events …
Checking For Random Events …
Checking For Random Events …
Performing Antiban - HOVERSkill[Random].

I have no idea what happened.

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.2.9 =============================]
[ ]
[ Ran For: 6 Hours, ** Minutes and 33 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ 45* 0 3**** 4 ]
[ 4** 0 2**** 3 ]
[ 4** 0 2**** 3 ]
[ 4** 0 2**** 1 ]
[ 4** 0 2**** 4 ]
[ ]
[=================================================================]
[=================================================================]

some of these accounts are my brothers old legit accounts that he put hundreds of hours into so i took a lot out of the report to minimize the chance that his legit accounts will be banned.

they all did 15 or more loads and one account got one level.

Thanks,
Payton

Coh3n

2010-01-02 20:43:30

Nice report, and don't worry about the names. The only reason I can think of why it stopped is that you lost connection, which would cause the script to mess up.

EDIT:

Script Updated!

In this version I made the script much better for those who choose to cut Oaks instead of Willows.
I also slightly improved the way the script cuts trees.

You need SCAR 3.23 Beta for the uptexts to work. Refer to the guide in my signature, and download SCAR via SVN Checkout.

mounty1

2010-01-04 18:45:04

Quick proggy.

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.3.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 1 Hours, 7 Minutes and 50 Seconds ]
[ Loads Done: 8 ]
[ Logs Chopped: 224 ]
[ Levels Gained: 4 ]
[ Exp Gained: 15120 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]

ran very well.
think im overloaded on bots atm got about 5 goin at once so closed this one till i sort the rest out.

ill post a longer one tomorrow probs
cheers

Edit:
didnt copy long proggy
ran for 8 hours
got about1.5k willow
went up 10lvls

EpicProject

2010-01-05 20:10:40

Coh3n,
Turns out i was using the installed SCAR instead of the prerelease version downloaded through TortoiseSVN, anyway..
Script works very well, will post progress report. =]

CJ

EpicProject

2010-01-05 23:00:39

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.3.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 2 Hours, 34 Minutes and 12 Seconds ]
[ Loads Done: 54 ]
[ Logs Chopped: 1458 ]
[ Levels Gained: 0 ]
[ Exp Gained: 98415 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]

Got stuck on the Quiz random. Very good script. Rep+

EDIT: Also gets stuck with random event reward box, instead of opening and selecting xp lamp it repeatedly attempts to bank it 20 times before logging out.

Coh3n

2010-01-06 12:56:28

From: EpicProject
EDIT: Also gets stuck with random event reward box, instead of opening and selecting xp lamp it repeatedly attempts to bank it 20 times before logging out.

Can you not bank the reward lamp? I must just have to add in a randoms check before it banks.

Script Updated!

Fixed an issue that would cause an Out of range error if a hatchet wasn't found.
Added a randoms check before opening the bank.

EpicProject

2010-01-07 02:29:08

Yes the reward lamp is bankable but it attempts to bank the box instead of opening it first then banking/using the lamp.

royalsymbol

2010-01-07 09:37:57

works quite well

[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================= V.3.2 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 35 Minutes and 42 Seconds                         ]
[      Loads Done: 9                                              ]
[      Logs Chopped: 252                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 17010                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

i had 3.23beta and the uptext error should appear if misclicked the tree

cutting yews would be efficient ;)

Coh3n

2010-01-07 09:54:20

From: EpicProject
Yes the reward lamp is bankable but it attempts to bank the box instead of opening it first then banking/using the lamp.

Alright well I added in that extra randoms check, so you shouldn't get that error again. :)

From: royalsymbol
works quite well

i had 3.23beta and the uptext error should appear if misclicked the tree

cutting yews would be efficient ;)

That uptext error probably won't occur if you're cutting Willows because the color is more unique than that of Oaks. Also, is there a good spot to cut and bank yews in Draynor?

vengence

2010-01-07 18:45:16

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.3.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 2 Hours, 2 Minutes and 37 Seconds ]
[ Loads Done: 40 ]
[ Logs Chopped: 1120 ]
[ Levels Gained: 0 ]
[ Exp Gained: 75600 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[=================================================================]

Great script! Thank you!

Also, is there a good spot to cut and bank yews in Draynor?

There are three Yews south east of Draynor bank

EpicProject

2010-01-07 19:34:19

From: Coh3n
Alright well I added in that extra randoms check, so you shouldn't get that error again. :)

Ah very nice, and one more thing, when i run the script excessively it eventually starts to lag pretty bad, freezing for up to 10 seconds often, not sure if it is my system or a build up of information within the script or what, but just thought you outta know.

If it is my system, any tips to fixing this problem would be greatly appreciated. =J

CJ

Coh3n

2010-01-08 11:29:33

From: vengence
There are three Yews south east of Draynor bank

Nice proggy, and I'll look into it. ;)

From: EpicProject
Ah very nice, and one more thing, when i run the script excessively it eventually starts to lag pretty bad, freezing for up to 10 seconds often, not sure if it is my system or a build up of information within the script or what, but just thought you outta know.

If it is my system, any tips to fixing this problem would be greatly appreciated. =J

CJ

Hmm, I have no idea why that would be. I'll have to look more at the script with I get time. Is anyone else having this issue?

daddyproboot

2010-01-08 13:52:41

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.3.2 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 1 Hours, 1 Minutes and 36 Seconds ]
[ Loads Done: 18 ]
[ Logs Chopped: 504 ]
[ Levels Gained: 0 ]
[ Exp Gained: 34020 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]

Nice script :D, 1 Hour proggy there Ill go for a 3 hour one now with breaks. I didnt get any randoms either ;)

Coh3n

2010-01-08 17:07:26

From: daddyproboot
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.3.2 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 1 Hours, 1 Minutes and 36 Seconds ]
[ Loads Done: 18 ]
[ Logs Chopped: 504 ]
[ Levels Gained: 0 ]
[ Exp Gained: 34020 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]

Nice script :D, 1 Hour proggy there Ill go for a 3 hour one now with breaks. I didnt get any randoms either ;)

Very nice, that doesn't happen often. ;)

EpicProject

2010-01-09 08:35:33

From: Coh3n
Nice proggy, and I'll look into it. ;)

Hmm, I have no idea why that would be. I'll have to look more at the script with I get time. Is anyone else having this issue?

Coh3n,
Disregard my previous post. My own mistake, the script changes the CPU usage to Very Low, made some changes to stop this and havent had and lag problems since. Sorry to waste your time.

CJ

Best progress report so far: 4hr 27min. /love

daddyproboot

2010-01-09 08:45:12

From: Coh3n
Very nice, that doesn't happen often. ;)

I know yea was pretty shocked tbh i bet if i ran it for a few hours id get a few :) its probably because the account i was using was a high level account and it had been innactive for a year ;)

Coh3n

2010-01-09 09:36:33

From: EpicProject
Coh3n,
Disregard my previous post. My own mistake, the script changes the CPU usage to Very Low, made some changes to stop this and havent had and lag problems since. Sorry to waste your time.

CJ

Best progress report so far: 4hr 27min. /love

Very nice! :) I'm glad it wasn't my script that was causing lag.

From: daddyproboot
I know yea was pretty shocked tbh i bet if i ran it for a few hours id get a few :) its probably because the account i was using was a high level account and it had been innactive for a year ;)

Yeah, I'm sure that helped. :p

EpicProject

2010-01-09 22:42:55

From: EpicProject
Coh3n,

Best progress report so far: 4hr 27min. /love

EDIT: Best progress report so far: 5hr 39 min.

Coh3n

2010-01-10 00:03:38

From: EpicProject
EDIT: Best progress report so far: 5hr 39 min.

Awesome! :) Can you post them please? I'd like to add them to the first post.

EpicProject

2010-01-10 01:50:18

From: Coh3n
Awesome! :) Can you post them please? I'd like to add them to the first post.

[php]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.3.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 5 Hours, 39 Minutes and 19 Seconds ]
[ Loads Done: 127 ]
[ Logs Chopped: 3429 ]
[ Levels Gained: 1 ]
[ Exp Gained: 231457 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]
[/php]

Coh3n

2010-01-10 11:11:49

From: EpicProject
[================================================== ===============]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.3.1 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 5 Hours, 39 Minutes and 19 Seconds ]
[ Loads Done: 127 ]
[ Logs Chopped: 3429 ]
[ Levels Gained: 1 ]
[ Exp Gained: 231457 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[================================================== ===============]

Awesome! :) Could you please post your reports in CODE/PHP tags? Makes it easier for me too add to the first post. Thanks.

ben600006

2010-01-10 21:00:53

** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank … Retrying … **
Found Bank Symbol! Relocating …
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank … Retrying … **
Found Bank Symbol! Relocating …

it wont find the bank properly ?

Coh3n

2010-01-10 21:16:37

From: ben600006
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank … Retrying … **
Found Bank Symbol! Relocating …
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank … Retrying … **
Found Bank Symbol! Relocating …

it wont find the bank properly ?

Hmm that's weird. Where was your character when this happened? And did that happen right away?

EpicProject

2010-01-11 11:53:39

No Dragon Hatchet compatability? Removed FindHatchet Function, quickened up the wait time when running to and from bank. Chops and banks faster than I would be concentrating! While still within reasonable limits. =]

Coh3n, your my idol.

Coh3n

2010-01-11 12:08:20

From: EpicProject
No Dragon Hatchet compatability? Removed FindHatchet Function, quickened up the wait time when running to and from bank. Chops and banks faster than I would be concentrating! While still within reasonable limits. =]

Coh3n, your my idol.

It should work with a Dragon hatchet…

ben600006

2010-01-12 22:21:16

From: Coh3n
Hmm that's weird. Where was your character when this happened? And did that happen right away?

its cause i was using an old version of scar.

it works now :)

Coh3n

2010-01-12 22:26:14

From: ben600006
its cause i was using an old version of scar.

it works now :)

Haha, alright, I'm glad you got it working. :)

rya

2010-01-13 15:46:25

Great :)
I am going to try to get 99 woodcutting
Thanks Coh3n i will post proggy soon!

Coh3n

2010-01-13 15:47:51

From: rya
Great :)
I am going to try to get 99 woodcutting
Thanks Coh3n i will post proggy soon!

Don't use it too much though, you don't want to get banned. :p

Rasta

2010-01-13 18:46:20

Why do you have the oak cutting by the jail instead of right by the bank?

Coh3n

2010-01-13 20:07:58

From: Rasta
Why do you have the oak cutting by the jail instead of right by the bank?

Because there's only one tree by the bank, and there's 3 near the jail.

raggdoll811

2010-01-13 23:05:14

From: Coh3n
Because there's only one tree by the bank, and there's 3 near the jail.

Speaking of that.. it wasn't that big of a problem, the guards attacking slowed it down a bit. But i did wander if you'd be willing to check out another close location with about 5 oaks bunched together. I did take into account the things necessary to script the walking. there seem to be good landmarks and even symbols on the MM. Let me know if you care to see it and i'll let ya know where im talking about, or even post a screen shot. It happens to be where I use your powercutter for oaks ;)

Coh3n

2010-01-13 23:11:06

From: raggdoll811
Speaking of that.. it wasn't that big of a problem, the guards attacking slowed it down a bit. But i did wander if you'd be willing to check out another close location with about 5 oaks bunched together. I did take into account the things necessary to script the walking. there seem to be good landmarks and even symbols on the MM. Let me know if you care to see it and i'll let ya know where im talking about, or even post a screen shot. It happens to be where I use your powercutter for oaks ;)

PM me a screenshot. ;)

Mrbanana

2010-01-14 00:42:27

-Removed this pic-
quick map o the oaks… didnt go to far into jail as i was on a lvl 3 >.<

E:making a bigger one, i see i missed a few… best spot is the jail so far

E: Ok, the safest spot for low levels with a few together is the corner up at the pottery place… there are about 5 there on that corner but you cant get to atleast one… 2 are in the same screen of eachother… i will post this new pic a bit later, ive added in diff colours for diff tree types >.<

E: Complete Draynor Lumber map. -The Mansion >.<

Im sure it was not necessary but well its done now. =-S

hubbard1989

2010-01-14 02:24:11

proggy for today

** Warning in Chop_Trees: Trees Not Found.**

** Warning in Chop_Trees: Couldn't find trees after 50 tries, logging out... **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================= V.3.2 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 49 Minutes and 27 Seconds                ]
[      Loads Done: 56                                             ]
[      Logs Chopped: 1568                                         ]
[      Levels Gained: 1                                           ]
[      Exp Gained: 105840                                         ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Successfully executed

Didn't detect random, just like your powerchopper script before you updated it

Coh3n

2010-01-14 17:16:54

@Mrbanana: :eek: Wasn't expecting that. :p Most of the good places for Oaks seem to be really far away, and no matter how well the walking code is written, wouldn't run for very long. I think that the spot I have no is the best for Oaks. You'll just have to get your combat up before doing it (your combat should be high if you're autoing anyway). I may add in the one oak tree beside the bank for low level players, but I'll have to see.

From: hubbard1989
proggy for today

** Warning in Chop_Trees: Trees Not Found.**

** Warning in Chop_Trees: Couldn't find trees after 50 tries, logging out... **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================= V.3.2 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 49 Minutes and 27 Seconds                ]
[      Loads Done: 56                                             ]
[      Logs Chopped: 1568                                         ]
[      Levels Gained: 1                                           ]
[      Exp Gained: 105840                                         ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Successfully executed

Didn't detect random, just like your powerchopper script before you updated it

Ah, on the last update I forgot to add a Randoms check if it didn't find the trees. I added one if it couldn't find the uptext, but not both. I'll be sure to add this to the next version.

I'm also working on a really sweet form for this script. I'm really proud of this form so far, so I hope you guys will like it. :)

Mrbanana

2010-01-14 19:22:32

hehe ok , and yeah just started a new toon and was like OMG 1HP RUUUN, just grabbed a power chopper for oaks and trees though.

***** STR: 'Leo The Gravedigger' RANDOM SOLVING FAILED! *****
** Warning in Chop_Trees: Couldn't find uptext after 50 tries, logging out… **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.3.2 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 3 Hours, 42 Minutes and 13 Seconds ]
[ Loads Done: 15 ]
[ Logs Chopped: 420 ]
[ Levels Gained: 5 ]
[ Exp Gained: 28350 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]

damn randoms D:

Coh3n

2010-01-16 10:37:59

Hey well at least I know my script is detecting the randoms. :p

Script Updated!

You now have to download this script via SVN Checkout (see first post of instructions).

[Rev. 3]
- Added SRL stats.
- Added the option to play a random sound if a random event is detected.
- Fixed the amount of xp you get if you're cutting oak trees.
- Added a break time feature to the script setup.
- Took out the "Break_After" parameter in the DeclarePlayers. The script will now automatically break after 1 hour (+/- 5 min.) if you choose to take breaks.

EDIT: Got this nice report cutting Oaks. It stopped due to the failing of the Molly random.
[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= Rev.3 =============================]
[ ]
[ You have chosen to cut Oak trees. ]
[ ]
[ Ran For: 3 Hours, 43 Minutes and 58 Seconds ]
[ Loads Done: 75 ]
[ Logs Chopped: 1996 ]
[ Levels Gained: 0 ]
[ Exp Gained: 74850 ]
[ Breaks: 2 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

EDIT2: Got another nice one, this time cutting Willows. This one stopped at the Pinball random.
[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= Rev.3 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 4 Hours, 7 Minutes and 38 Seconds ]
[ Loads Done: 66 ]
[ Logs Chopped: 1848 ]
[ Levels Gained: 1 ]
[ Exp Gained: 124740 ]
[ Breaks: 2 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

raggdoll811

2010-01-16 11:50:06

Script Updated!

* You now have to download this script via SVN Checkout (see first post of instructions).

[Rev. 3]
- Added SRL stats.
- Added the option to play a random sound if a random event is detected.
- Fixed the amount of xp you get if you're cutting oak trees.
- Added a break time feature to the script setup.
- Took out the "Break_After" parameter in the DeclarePlayers. The script will now automatically break after 1 hour (+/- 5 min.) if you choose to take breaks.

Great updates! I'll run it and post back with a good prog :)

sk80rdie76

2010-01-16 12:39:20

my uptext for some reason isn't working because it isn't clicking to chop on the trees

edit: fixed it will post proggy

Coh3n

2010-01-16 22:58:46

From: sk80rdie76
my uptext for some reason isn't working because it isn't clicking to chop on the trees

edit: fixed it will post proggy

:p I can see your using it at my stats page. Thanks for signing up for the stats.

EDIT: Just got this report cutting Oaks. Stopped because I lost connection.
[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= Rev.6 =============================]
[ ]
[ You have chosen to cut Oak trees. ]
[ ]
[ Ran For: 5 Hours, 12 Minutes and 34 Seconds ]
[ Loads Done: 103 ]
[ Logs Chopped: 2790 ]
[ Levels Gained: 0 ]
[ Exp Gained: 104625 ]
[ Breaks: 3 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

Bad Boy JH

2010-01-16 23:10:53

I just ran into an issue, whilst it was searching for trees i got a whole string of "couldn't find uptext" error messages followed by

** Warning in Chop_Trees: Couldn't find uptext after 50 tries, logging out… **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **

I logged on, I was in a random (Niles i think, one of those guys anyway), I figure, after a few couln't find uptexts, does it check for randoms, if it doesn't that may be a good thing to add in on your next update

I was using V3.2 of your script and Scar 3.23beta

Coh3n

2010-01-16 23:15:58

From: Bad Boy JH
I just ran into an issue, whilst it was searching for trees i got a whole string of "couldn't find uptext" error messages followed by

** Warning in Chop_Trees: Couldn't find uptext after 50 tries, logging out… **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **

I logged on, I was in a random (Niles i think, one of those guys anyway), I figure, after a few couln't find uptexts, does it check for randoms, if it doesn't that may be a good thing to add in on your next update

I was using V3.2 of your script and Scar 3.23beta

Yeah, I don't remember if I added the random's check in that version or if it was the next. That issue should be fixed in the current version. Just download and away you go. I'm about to update it again so make sure it's at revision 6. ;)

hubbard1989

2010-01-17 18:22:30

Good job on latest version

Here is my latest progress report and feedback
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= Rev.3 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 4 Hours, 31 Minutes and 6 Seconds ]
[ Loads Done: 63 ]
[ Logs Chopped: 1764 ]
[ Levels Gained: 0 ]
[ Exp Gained: 119070 ]
[ Breaks: 3 ]
[ ]
[=================================================================]
[=================================================================]
It ran okay, except for the following glitch:

Script did not detect random. I got 2000 uptext errors in a row. after looking at your code, if i understand it correctly, it looks like you accidentally set wrongUptext = 0 every time it looks for a tree. i believe if you move that line of code to here, it will work properly.


      if ((wrongUptext >= 50))  then
      begin
        Find_Randoms;
        wrongUptext := 0 //Move it here

EDIT:
i did this, and it didnt seem to help…..

Bad Boy JH

2010-01-17 19:39:40

I'm pretty sure that Findrandoms is a boolean, so you only want to reset the wronguptext to 0 if you DO find a random, otherwise you want to log the player out and terminate the script.

I Don't QUITE have the experiance to do it, so….I'll leave it up to you…

Coh3n

2010-01-17 23:34:53

Thanks for the feedback, but the way I have it is suppose to work. I'm not sure why it didn't log you out. It only sets the wrongUptext variable back to 0 if the uptext is found. I also have it set to check for randoms if:

The trees aren't found.
The wrong uptext is found 50 times in a row. If you're chopping Oaks, I have to script try to relocate back to it's original position. If the uptext isn't found 60 times in a row, then the script is suppose to log out, and set that current player to false.

I've looked over my code three times, and don't understand why it wouldn't log out, other than it would find the right uptext inside the random every once in a while. The latter is unlikely considering there aren't any trees inside the randoms as far as I know. Depending on the random, there may not be a built-in detection system for it (it may be currently unsolvable). However, I thought that if it was unsolvable, there was still a function that would log the character out, and set it to false if it happened to come by that particular event.

I'm actually going to add a Writeln procedure in my Find_Randoms function, just to make sure it's actually being run. Please update to revision 9. :)

Thanks,
Coh3n

hubbard1989

2010-01-18 07:27:54

Here is what i did. after the line where you set wrongUptext :=0 i added

writeln('uptext has been set to zero')

so when the script is running, it will tell you if it gets set back to zero. here is what i got


** Warning in Chop_Tree: Error Finding Uptext. **
uptext has been set to zero
** Warning in Chop_Tree: Error Finding Uptext. **
uptext has been set to zero
** Warning in Chop_Tree: Error Finding Uptext. **
uptext has been set to zero
** Warning in Chop_Tree: Error Finding Uptext. **
uptext has been set to zero
** Warning in Chop_Tree: Error Finding Uptext. **
uptext has been set to zero
** Warning in Chop_Tree: Error Finding Uptext. **
uptext has been set to zero
** Warning in Chop_Tree: Error Finding Uptext. **
uptext has been set to zero
** Warning in Chop_Tree: Error Finding Uptext. **
uptext has been set to zero
** Warning in Chop_Tree: Error Finding Uptext. **
uptext has been set to zero

so you can see, wrongUptext is being reset prematurely

Coh3n

2010-01-18 10:57:42

From: hubbard1989

so you can see, wrongUptext is being reset prematurely

I see it, but I don't believe it. That makes absolutely no sense. The WaitUpText function returns try only if the uptext is found, and the same should happen with this code:


      if (WaitUpTextMulti(Tree.UpText, 200)) then
      // if WaitOptionMulti(Tree.UpText, 200) then
      begin
        wrongUptext := 0;
        Mouse(x, y, 0, 0, True);

Should only be executed if the uptext is found. I would love someone to educate me on why it's still begin executed, even though the if..then statement is false.

EDIT: Hubbard: I don't know where you put that line, but I don't think it was in the right place. Here's what I did:


if (WaitUpTextMulti(Tree.UpText, 200)) then
  // if WaitOptionMulti(Tree.UpText, 200) then
  begin
    Writeln('Uptext found!');
    wrongUptext := 0;
    Writeln('Set wrongUptext back to 0.');
    Mouse(x, y, 0, 0, True);

And it did exactly what it's suppose to. I purposely set the uptext to one that would fail 50 times in a row. After it did, it looked for randoms, and then logged out. The debug info. was as follows:


** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Trees: Couldn't find uptext after 50 tries, logging out. **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **

EDIT2: Please update to Rev. 10. :)

Alligaattor

2010-01-18 16:48:11

Thanks, works like a charm. Will edit later and post new proggy.

Stopped myself so that I can buy new axe.

 
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.10 =============================]
[                                                                 ]
[      You have chosen to cut Oak trees.                          ]
[                                                                 ]
[      Ran For: 2 Hours, 32 Minutes and 34 Seconds                ]
[      Loads Done: 18                                             ]
[      Logs Chopped: 503                                          ]
[      Levels Gained: 11                                          ]
[      Exp Gained: 18862                                          ]
[      Breaks: 1                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.10 =============================]
[                                                                 ]
[      You have chosen to cut Oak trees.                          ]
[                                                                 ]
[      Ran For: 2 Hours, 1 Minutes and 27 Seconds                 ]
[      Loads Done: 42                                             ]
[      Logs Chopped: 1176                                         ]
[      Levels Gained: 5                                           ]
[      Exp Gained: 44100                                          ]
[      Breaks: 1                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

sk80rdie76

2010-01-18 18:23:54


[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.10 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 3 Hours, 9 Minutes and 45 Seconds                 ]
[      Loads Done: 66                                             ]
[      Logs Chopped: 1848                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 124740                                         ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

manually stopped

Bad Boy JH

2010-01-19 08:18:33

I got about 100 "Scanning for random events…" messages before I got to the willows straight up, you may want to check that out…

Coh3n

2010-01-19 12:16:45

From: Bad Boy JH
I got about 100 "Scanning for random events…" messages before I got to the willows straight up, you may want to check that out…

That's suppose to happen. It looks for randoms while you walk to the trees. If you want, you can comment out that line in the Find_Randoms procedure. It's up to you.

EDIT: I would also like to remind everyone who uses this script to please sign up for SRL stats. It takes 30 seconds plus you can see who's used the script the most. :rolleyes:

Bad Boy JH

2010-01-19 16:49:33

Should It really check for randoms 5 times every second, (it was the willow trees)

Coh3n

2010-01-19 16:52:38

From: Bad Boy JH
Should It really check for randoms 5 times every second, (it was the willow trees)

Well it doesn't effect the script efficiency either way. I could add a wait in there, but that would overall slow down the script.

Bad Boy JH

2010-01-19 20:25:17

It makes RS go all skippy and slows down my computer when that happens…then again…good count indicator…"stop slowing down you stupid computer" every few mins…

Coh3n

2010-01-19 21:06:24

From: Bad Boy JH
It makes RS go all skippy and slows down my computer when that happens…then again…good count indicator…"stop slowing down you stupid computer" every few mins…

Well whether the text shows up in the debug or not, your computer would still lag. I have an idea that may stop that. I'll edit and update it now.

EDIT: Please update to Revision 11.

Alligaattor

2010-01-20 03:02:21

From: Coh3n
I would also like to remind everyone who uses this script to please sign up for SRL stats. It takes 30 seconds plus you can see who's used the script the most. :rolleyes:

I have registered there and my acc is FateOfRoses… :D

Coh3n

2010-01-20 10:39:09

From: Alligaattor
I have registered there and my acc is FateOfRoses… :D

Oh I was wondering who that was. You're really racking up the hours. :p

I like it!

Alligaattor

2010-01-20 15:13:30

From: Coh3n
Oh I was wondering who that was. You're really racking up the hours. :p

I like it!

Only a little :D

I really like your script :P
The only problem is that it doesn't solve all randoms… :S
but it isn't your scripts fault ;)

Coh3n

2010-01-21 23:26:59

From: Alligaattor
Only a little :D

I really like your script :P
The only problem is that it doesn't solve all randoms… :S
but it isn't your scripts fault ;)

Yeah, there are a lot of people working on the randoms all the time. Chances are they won't ALL be solvable at one time, but that's the goal. :p

Bad Boy JH

2010-01-22 04:26:10

I am unsure if this is your fault…my fault or SRL's fault…BUT after a random event, the gift box doesn't get used…it sits in my invo collecting dust and taking up space…

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.10 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 6 Hours, 13 Minutes and 1 Seconds ]
[ Loads Done: 90 ]
[ Logs Chopped: 2520 ]
[ Levels Gained: 1 ]
[ Exp Gained: 170100 ]
[ Breaks: 4 ]
[ ]
[=================================================================]
[=================================================================]

That Part I do Like the run for a few hours collect a lot of logs…I love it

Bad Boy JH

2010-01-22 04:32:48

I am unsure if this is your fault…my fault or SRL's fault…BUT after a random event, the gift box doesn't get used…it sits in my invo collecting dust and taking up space…

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.10 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 6 Hours, 13 Minutes and 1 Seconds ]
[ Loads Done: 90 ]
[ Logs Chopped: 2520 ]
[ Levels Gained: 1 ]
[ Exp Gained: 170100 ]
[ Breaks: 4 ]
[ ]
[=================================================================]
[=================================================================]

That Part I do Like the run for a few hours collect a lot of logs…I love it

EDIT appologies, thought it didn't send

/me hits the computer… "Bad Computer Bad…."

Coh3n

2010-01-22 11:20:41

Nice report! And try the new version for your random event box problem. :)

Bad Boy JH

2010-01-25 02:58:24

It found the event box, and used it, getting the lamp…unfortunatly, it failed to use the lamp… well you half fixed it…

Coh3n

2010-01-25 15:38:06

From: Bad Boy JH
It found the event box, and used it, getting the lamp…unfortunatly, it failed to use the lamp… well you half fixed it…

Alright, I added a FindLamp function. We'll see if that works.

Alligaattor

2010-01-27 08:14:03

Here's a little proggy :P

[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.13 =============================]
[                                                                 ]
[      You have chosen to cut Oak trees.                          ]
[                                                                 ]
[      Ran For: 5 Hours, 16 Minutes and 10 Seconds                ]
[      Loads Done: 132                                            ]
[      Logs Chopped: 3614                                         ]
[      Levels Gained: 2                                           ]
[      Exp Gained: 135525                                         ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

Sometimes it clicks just random tree and gets lost. It is always near the prison tho…

Sex

2010-01-27 09:47:14

Hey bro, instead of using your Changelog.txt file (or in addition to, whichever you prefer) you can use the subversion log messages :p. That's what they are there for ;).

Coh3n

2010-01-27 12:10:54

From: Alligaattor
Here's a little proggy :P

[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.13 =============================]
[                                                                 ]
[      You have chosen to cut Oak trees.                          ]
[                                                                 ]
[      Ran For: 5 Hours, 16 Minutes and 10 Seconds                ]
[      Loads Done: 132                                            ]
[      Logs Chopped: 3614                                         ]
[      Levels Gained: 2                                           ]
[      Exp Gained: 135525                                         ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

Sometimes it clicks just random tree and gets lost. It is always near the prison tho…

Nice report, and yes that really annoys me also. I don't know how to prevent that. It already does the uptext check, and apparently gets it wrong sometimes.

From: Sex
Hey bro, instead of using your Changelog.txt file (or in addition to, whichever you prefer) you can use the subversion log messages :p. That's what they are there for ;).

Yeah I can do that. :)

Coh3n

2010-01-28 01:45:45

Please update to revision 15.

Alligaattor

2010-01-28 16:50:45

Ooh! I see you have putted my stats and proggy on the first post :P
Thank you for the honor.

Coh3n

2010-01-28 16:51:51

From: Alligaattor
Ooh! I see you have putted my stats and proggy on the first post :P
Thank you for the honor.

:p You "worked" for it.

Alligaattor

2010-01-28 17:01:52

From: Coh3n
:p You "worked" for it.

yeah… "worked"
have one proggy coming, 9 hours already without stops :P
It doesn't click the lamp tho… just tries to bank it for all eternity :)

Coh3n

2010-01-28 17:02:30

From: Alligaattor
yeah… "worked"
have one proggy coming, 8 and a half hours already without stops :P
It doesn't click the lamp tho… just tries to bank it for all eternity :)

Still? Does it even click the lamp?

Alligaattor

2010-01-28 18:14:10

From: Coh3n
Still? Does it even click the lamp?

nope, doesn't even hover mouse over it…

new proggy:

***** STR: FOUND RANDOM: 'Surprise Exam' *****
***** STR: 'Surprise Exam' RANDOM SOLVING FAILED! *****
Next Player
Your Player Is Inactive, Terminating Script.
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.14 =============================]
[                                                                 ]
[      You have chosen to cut Oak trees.                          ]
[                                                                 ]
[      Ran For: 10 Hours, 20 Seconds                              ]
[      Loads Done: 168                                            ]
[      Logs Chopped: 4576                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 171600                                         ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Successfully executed

Coh3n

2010-01-28 18:54:58

Wow very nice! I'll add that to the first post, and if someone could lend me an account with the rewards lamp on it, I could make a quick fix for that bug.

Frement

2010-01-28 19:29:07

God your script is good! :)

Monitored for 10 minutes and now gonna let it roll. Posting proggy when its done.

Alligaattor

2010-01-28 19:39:46

hey I just began to think about script revision… it says your script is on rev 15 but the proggy says 14 ?!?

Coh3n

2010-01-28 19:41:29

From: Alligaattor
hey I just began to think about script revision… it says your script is on rev 15 but the proggy says 14 ?!?

I probably just forgot to change the SCRIPT_VERSION constant the last time I updated. It's nothing to worry about. :)

wabakoo420

2010-01-29 00:29:59

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.13 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 11 Hours, 47 Minutes and 11 Seconds ]
[ Loads Done: 128 ]
[ Logs Chopped: 3584 ]
[ Levels Gained: 1 ]
[ Exp Gained: 241920 ]
[ Breaks: 8 ]
[ ]
[=================================================================]

Coh3n

2010-01-29 00:33:12

From: wabakoo420
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.13 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 11 Hours, 47 Minutes and 11 Seconds ]
[ Loads Done: 128 ]
[ Logs Chopped: 3584 ]
[ Levels Gained: 1 ]
[ Exp Gained: 241920 ]
[ Breaks: 8 ]
[ ]
[=================================================================]

:eek: Very nice, added to first post.

Sex

2010-01-29 01:32:53

I would be able to get good progress reports, but I keep getting randoms..

Coh3n

2010-01-29 01:34:45

From: Sex
I would be able to get good progress reports, but I keep getting randoms..

Is the script not detecting any of them?

Sex

2010-01-29 01:52:35

No, it is. I mean SRL is failing to solve pretty much all of them.

Coh3n

2010-01-29 01:55:37

From: Sex
No, it is. I mean SRL is failing to solve pretty much all of them.

Oh. Alright, as long as it's not my scripts fault. A lot of the randoms work sometimes. At least they do for me.

Sex

2010-01-29 01:58:59

I'll try to go for an overnight run. If it is still running in the morning I'll run it whilst at school as well. If all goes well it should be a 16+ hour proggy :).

Coh3n

2010-01-29 02:01:22

From: Sex
I'll try to go for an overnight run. If it is still running in the morning I'll run it whilst at school as well. If all goes well it should be a 16+ hour proggy :).

Haha just hope for the best. :p

wabakoo420

2010-01-29 10:35:07

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.14 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 9 Hours, 46 Minutes and 1 Seconds ]
[ Loads Done: 127 ]
[ Logs Chopped: 3555 ]
[ Levels Gained: 0 ]
[ Exp Gained: 239962 ]
[ Breaks: 7 ]
[ ]
[=================================================================]

wouldn't open lamp for some reason

Coh3n

2010-01-29 10:37:43

From: wabakoo420
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.14 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 9 Hours, 46 Minutes and 1 Seconds ]
[ Loads Done: 127 ]
[ Logs Chopped: 3555 ]
[ Levels Gained: 0 ]
[ Exp Gained: 239962 ]
[ Breaks: 7 ]
[ ]
[=================================================================]

wouldn't open lamp for some reason

Do you still have the lamp on the account? I'd like to fix the function if you trust me with your account.

PM me the details if you don't mind. :) If you don't want me on your account, I completely understand, so don't worry.

wabakoo420

2010-01-29 18:01:31

nah I opened the lamp, if i get another one i'll hit you up though.

Alligaattor

2010-01-29 18:20:20

Do you still have the lamp on the account? I'd like to fix the function if you trust me with your account.

I have lamp now in my inv…

Bad Boy JH

2010-01-30 00:35:03

Clear Debug Box, and Run this script, post what is in your debug box…

program New;
  {.Include srl\srl.scar}
const
  skill = 'woodcutting';
var
  LampTime, X, Y, I: Integer;
begin
  SetupSRL
  GameTab(tab_Inv);
  if FindColorTolerance(x, y, 1084300, MIX1, MIY1, MIX2, MIY2, 40) then
  begin
    writeln('found color tolerance')
    if (FindTransparentBitmapTolerance(Lamp, x, y, clBlack, MIX1, MIY1, MIX2, MIY2, 40)) then
    begin
      writeln('found Transparent Bitmap')
      Inc(RandSolved[rand_Lamp]);
      TakeScreen('Lamp Random Solved');
      AddToSRLLog('******** SOLVED LAMP RANDOM ********');
      WriteLn('******** SOLVED LAMP RANDOM ********');
      Mouse(X, Y, 4, 4, True);
      Wait(1500 + Random(500));
      MarkTime(LampTime);
      writeln('Lamp Time Marked')
      for I := 1 to 4 do
      begin
        case (LowerCase(Skill)) of
          'attack': Mouse(81, 109, 12, 12, True);
          'strength': Mouse(139, 110, 12, 12, True);
          'ranged': Mouse(196, 113, 12, 12, True);
          'magic': Mouse(257, 117, 12, 12, True);
          'defence': Mouse(319, 109, 12, 12, True);
          'crafting', 'craft': Mouse(376, 111, 12, 12, True);
          'hitpoints', 'hp': Mouse(436, 112, 12, 12, True);
          'prayer', 'pray': Mouse(79, 166, 12, 12, True);
          'agility': Mouse(141, 166, 12, 12, True);
          'herblore': Mouse(199, 171, 12, 12, True);
          'thieving', 'thief': Mouse(258, 167, 12, 12, True);
          'fishing', 'fish': Mouse(325, 164, 12, 12, True);
          'runecraft', 'runecrafting': Mouse(375, 167, 12, 12, True);
          'slayer', 'slay': Mouse(436, 173, 12, 12, True);
          'farming', 'farm': Mouse(83, 224, 12, 12, True);
          'mining', 'mine': Mouse(137, 222, 12, 12, True);
          'smithing', 'smith': Mouse(197, 220, 12, 12, True);
          'hunting', 'hunt', 'hunter': Mouse(257, 222, 12, 12, True);
          'cooking', 'cook': Mouse(318, 227, 12, 12, True);
          'firemaking', 'fire': Mouse(378, 226, 12, 12, True);
          'woodcutting', 'wc': Mouse(439, 222, 12, 12, True);
          'fletching', 'fletch': Mouse(199, 275, 12, 12, True);
          'construction': Mouse(255, 277, 12, 12, True);
          'summoning': Mouse(323, 276, 12, 12, True);
        else
          Mouse(438, 113, 12, 12, True);
        end;
        writeln('selected a skill')
        Wait(500 + Random(200) + Random(100));
        if FindColorTolerance(X, Y, 5602449, 41, 75, 470, 302, 30) then Break;
        if (TimeFromMark(LampTime) > 10000) then
        begin
          Logout;
          Players[CurrentPlayer].Rand := 'Lamp';
          Exit;
        end;
        ClickToContinue;
      end;
      Mouse(416, 281, 7, 1, True);
      Wait(500 + Random(150) + Random(150));
    end;
  end;
end.

I edited the SRL findlamp function, so that it writes a line occasionally, telling us if it finds things…the error may lie in the SRL code…in which case it needs to be updated….

Just set the constant up the top,and log in, and hit run…should work OK

Sorry If I am intruding on your turf coh3n…

Alligaattor

2010-01-30 04:28:51

I ran that code and got this…

Successfully compiled (2204 ms)
SRL Compiled in 16 msec
found color tolerance
Successfully executed

Coh3n

2010-01-30 11:29:53

From: Bad Boy JH
Sorry If I am intruding on your turf coh3n…

No worries, that was the function I was going to try to fix anyway, or rewrite.

From: Alligaattor
I ran that code and got this…
Successfully compiled (2204 ms)
SRL Compiled in 16 msec
found color tolerance
Successfully executed

Okay so the Bitmap isn't being found. I'm going to run my account for a bit and see if I can get a lamp, then I can fix/rewrite that function. :)

Alligaattor

2010-01-30 11:35:46

i can lend you my acc

Coh3n

2010-01-30 11:36:52

From: Alligaattor
i can lend you my acc

Alright that's awesome, but I don't think I'll get time to fix it in the next couple days as I'm really busy. I may as well just try to get one on my account in the meantime. If I need your account later, I'll let you know.

Thanks,
Coh3n

Alligaattor

2010-01-30 11:39:41

okay, i'll keep it on my inv then.

Coh3n

2010-01-30 13:11:53

From: Alligaattor
okay, i'll keep it on my inv then.

I actually got some time right now, if you want to PM me your details. :)

wig44

2010-01-30 15:23:17

Line 5: [Error] (5:11): Unknown identifier 'SmartIsKeyDown' in script

Keep getting this error, no idea why.

Coh3n

2010-01-30 15:24:22

From: wig44
Line 5: [Error] (5:11): Unknown identifier 'SmartIsKeyDown' in script

Keep getting this error, no idea why.

Move your plugins. Tools > Options > SRL Download > Move Plugins

If that doesn't work, refer to my guide to move them manually.

wig44

2010-01-31 05:24:45

It's been a long time since I used scar :P I made sure everything was up to date, and I am getting a different erorr now;

[Runtime Error] : Exception: Could not convert variant of type (String) into type (Boolean) in line 366 in script C:\Users\<myname>\Desktop\SCAR 3.23 Beta\includes\SRL\SRL\Core\GameTab.scar

Coh3n

2010-01-31 22:27:56

From: wig44
It's been a long time since I used scar :P I made sure everything was up to date, and I am getting a different erorr now;

[Runtime Error] : Exception: Could not convert variant of type (String) into type (Boolean) in line 366 in script C:\Users\<myname>\Desktop\SCAR 3.23 Beta\includes\SRL\SRL\Core\GameTab.scar

I think that was a bug in SRL, just update to the latest Dev Revision.

V Macro V

2010-01-31 23:27:38

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.14 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 2 Hours, 55 Minutes and 58 Seconds ]
[ Loads Done: 27 ]
[ Logs Chopped: 756 ]
[ Levels Gained: 7 ]
[ Exp Gained: 51030 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed

Anyway to get it to run longer?

EpicProject

2010-02-01 11:14:33

Thanks Coh3n, couldnt of done it without you my man.

Coh3n

2010-02-01 14:58:38

From: V Macro V
Anyway to get it to run longer?

Well why did it stop?

From: EpicProject

Thanks Coh3n, couldnt of done it without you my man.

Congrats! :D What level did you start using my script at?

pyroryan

2010-02-02 17:23:38

I just now started this script. It logs in fine, goes and chops logs, runs back to bank, opens the bank and then pauses. The script is still running but at the bottom it says possible random: pillory. I think this might be an SRL thing though.

Edit: It is an SRL issue but it still didn't bank properly so I changed the Depositall function to the Deposit function and it worked fine, although it took awhile so I set it to Deposit(1, 1, 28);

Juuso

2010-02-02 19:12:13

Looks like a good script. Too bad my script stops at "Click here to play". It just wont click the button. Anyhow, I installed Scar and SRL exactly as you suggested in your tutorial.

Coh3n

2010-02-02 22:22:01

From: pyroryan
I just now started this script. It logs in fine, goes and chops logs, runs back to bank, opens the bank and then pauses. The script is still running but at the bottom it says possible random: pillory. I think this might be an SRL thing though.

Edit: It is an SRL issue but it still didn't bank properly so I changed the Depositall function to the Deposit function and it worked fine, although it took awhile so I set it to Deposit(1, 1, 28);

Actually I read somewhere that there are a lot of functions are broken at the moment, due do a RS update, the Deposit functions begin among that list. I will try to make an alternative when I get time.

From: Juuso
Looks like a good script. Too bad my script stops at "Click here to play". It just wont click the button. Anyhow, I installed Scar and SRL exactly as you suggested in your tutorial.

That won't be a problem with my script, it will be a problem with one of the SRL login functions. Either way, I'll take a look.

Abbott

2010-02-02 22:46:43

Whenever I run the script, it tries to find my hatchet that I have equipped (Dragon Hatchet) and fails and logs me out. Is this normal or do i need a different setup?

Coh3n

2010-02-02 23:13:10

From: Abbott
Whenever I run the script, it tries to find my hatchet that I have equipped (Dragon Hatchet) and fails and logs me out. Is this normal or do i need a different setup?

It's quite possible that the Dragon Hatchet DTM is broken. Do you mind making me one real quick if you know how? :)

EDIT: Please update to revision 17. Also, for any login errors, update to the latest Dev revision. It is fixed there. :)

pyroryan

2010-02-03 00:48:13

Well, I didn't like how it took forever to bank, so I changed the code to click on the deposit all button. I've never coded scar before but I assume it's kinda like everything else so if I do something wrong let me know. I have hatchet equipped so if you don't then this won't work. It banks in 3 seconds.

if (Players[CurrentPlayer].Booleans[P_EQUIPPED]) then
      begin
           Wait(RandomRange(100, 300));
           Mouse(390 + RandomRange(-10, 10), 300 + RandomRange(-10, 10), 10, 10, True);
           Wait(RandomRange(100, 300));
           Exit;
      end

The exit; is needed or else it doesn't work.

Coh3n

2010-02-03 00:53:49

From: pyroryan
Well, I didn't like how it took forever to bank, so I changed the code to click on the deposit all button. I've never coded scar before but I assume it's kinda like everything else so if I do something wrong let me know. I have hatchet equipped so if you don't then this won't work. It banks in 3 seconds.
if (Players[CurrentPlayer].Booleans[P_EQUIPPED]) then
      begin
           Wait(RandomRange(100, 300));
           Mouse(390 + RandomRange(-10, 10), 300 + RandomRange(-10, 10), 10, 10, True);
           Wait(RandomRange(100, 300));
           Exit;
      end
The exit; is needed or else it doesn't work.

Thanks man, but I already fixed it in the newest version. There is a bug in the SRL GameTab function that hasn't been committed yet, so I edited a few functions in SRL and added them to my script.

Revision 17 banks in only a couple seconds. :)

pyroryan

2010-02-03 00:59:12

Oh sorry, I see now where you said to update. Awesome script by the way. I'll run it all night and see what happens.

Coh3n

2010-02-03 01:00:18

From: pyroryan
Oh sorry, I see now where you said to update. Awesome script by the way. I'll run it all night and see what happens.

No need to apologize, I like that you had the initiative to help me out. :)

EpicProject

2010-02-03 03:40:13

I started using this script @ lvl 80. and it took about 2 and a half weeks to get to 99.

Juuso

2010-02-03 06:57:02

From: Coh3n

That won't be a problem with my script, it will be a problem with one of the SRL login functions. Either way, I'll take a look.

If its not a problem with the script, its a problem with your tutorial. I wonder why I'm the only one having the problem?

bobINaShOe

2010-02-03 08:52:15

nice, how do i disable SMART though? :/

pyroryan

2010-02-03 09:24:27

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.16 =============================]
[ ]
[ You have chosen to cut Oak trees. ]
[ ]
[ Ran For: 1 Hours, 53 Minutes and 23 Seconds ]
[ Loads Done: 38 ]
[ Logs Chopped: 1044 ]
[ Levels Gained: 6 ]
[ Exp Gained: 39150 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed

Got stuck between bank and Oaks on the way back.

Coh3n

2010-02-03 11:33:50

From: EpicProject
I started using this script @ lvl 80. and it took about 2 and a half weeks to get to 99.

Wow, you got that pretty fast!

From: Juuso
If its not a problem with the script, its a problem with your tutorial. I wonder why I'm the only one having the problem?

If you have the latest Dev Revision of SRL then it is working fine. Try using another script and see if you get the same problem.

From: bobINaShOe
nice, how do i disable SMART though? :/

Change line 58 to:


//{.Include srl\srl\Misc\Smart.scar}

From: pyroryan
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.16 =============================]
[ ]
[ You have chosen to cut Oak trees. ]
[ ]
[ Ran For: 1 Hours, 53 Minutes and 23 Seconds ]
[ Loads Done: 38 ]
[ Logs Chopped: 1044 ]
[ Levels Gained: 6 ]
[ Exp Gained: 39150 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed

Got stuck between bank and Oaks on the way back.

Not bad, did it just not find the bank or what?
____________________________________

Please update to revision 18.

Kris7848

2010-02-03 14:02:02

Hey Coh.

I see it says I need version 3.23, but I have been on Freddys site and can only see 3.22?
Any help here please?

Thanks.

Kris.

Dynamite

2010-02-03 14:06:03

It is a pre-release.
Icefire has a guide on how to get it :)

Kris7848

2010-02-03 14:08:18

Ahh Ill check it out, let's hope I can get it all back up and running haha.

Kris7848

2010-02-03 14:18:51

Well no idea whats up with that beta…nothing is compiling….

Line 270: [Error] (15594:1): Invalid number of parameters in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar
Failed when compiling
Line 20: [Error] (20:16): Unknown identifier 'TabExists' in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

Dynamite

2010-02-03 14:19:37

Dont double post ;)
And have you got SRL Dev?

pyroryan

2010-02-03 14:53:50

From: Coh3n

Not bad, did it just not find the bank or what?

It said the first walk was successful, but then it couldn't find the bank booth I guess and timed out after too many tries. Ended up on the path to the right of the bank.

Coh3n

2010-02-03 15:02:00

From: Kris7848
Well no idea whats up with that beta…nothing is compiling….

Line 270: [Error] (15594:1): Invalid number of parameters in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar
Failed when compiling
Line 20: [Error] (20:16): Unknown identifier 'TabExists' in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

Move your plugins.

From: pyroryan
It said the first walk was successful, but then it couldn't find the bank booth I guess and timed out after too many tries. Ended up on the path to the right of the bank.

That's weird, it has a symbol finding failsafe that usually works, maybe it just wasn't in view.

Kris7848

2010-02-03 15:16:38

I have moved my plugins from the SRL folder, still same problem, any more advice?

Kris.

Coh3n

2010-02-03 15:18:08

From: Kris7848
I have moved my plugins from the SRL folder, still same problem, any more advice?

Kris.

Do you have the public SRL? If so, you need to Dev version.

Kris7848

2010-02-03 15:21:14

Is that Dev 42?

Dynamite

2010-02-03 15:24:58

No that is Public SRL.
Choose either mine or Coh3ns guide on getting Dev. :)

Kris7848

2010-02-03 15:29:36

Yes done it:
http://www.villavu.com/forum/showthread.php?t=17890
That is for Dev right?
And its still not working :|

Dynamite

2010-02-03 15:31:26

No that is Public.
As said, use mine or Coh3ns SRL/SCAR guide.

Coh3n

2010-02-03 15:39:45

From: Kris7848
Yes done it:
http://www.villavu.com/forum/showthread.php?t=17890
That is for Dev right?
And its still not working :|

Use this guide. Or The Man's. I'm pretty sure Icefire's is up to date also.

Kris7848

2010-02-03 15:45:51

Just used Coh3ns SRL/Scar Guide, still getting errors, but now on different lines :|

Line 270: [Error] (15594:1): Invalid number of parameters in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

It says its in the Sandwich.Scar?

if thats any help?

Coh3n

2010-02-03 16:00:52

From: Kris7848
Just used Coh3ns SRL/Scar Guide, still getting errors, but now on different lines :|

Line 270: [Error] (15594:1): Invalid number of parameters in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

It says its in the Sandwich.Scar?

if thats any help?

What revision did it say you were at when you downloaded? It should be at 366. Could you post the line that get's the error?

Kris7848

2010-02-03 18:02:48

Failed when compiling
Line 270: [Error] (15594:1): Invalid number of parameters in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

Rev 42.
and yep it was at 366

Coh3n

2010-02-03 19:41:57

From: Kris7848
Failed when compiling
Line 270: [Error] (15594:1): Invalid number of parameters in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

Rev 42.
and yep it was at 366

No, like post line 270 in Sandwich.scar. That script pops up when the error occurs.

Sex

2010-02-03 21:14:31

You just said, rev 42, and yep it was at 366..
It was at revision 366 not revision 42..

i luffs yeww

2010-02-03 22:09:38

Kris, do you have SCAR 3.23? (the prerelease)

Coh3n

2010-02-04 00:23:00

From: i luffs yeww
Kris, do you have SCAR 3.23? (the prerelease)

I think you're the third person to ask her that. :p

Kris7848

2010-02-04 14:00:57

Yesss ofcourse I have the pre releaseee!

Here is the line from the Sarniee.

Line 20: [Error] (20:16): Unknown identifier 'TabExists' in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

Coh3n

2010-02-04 14:10:09

From: Kris7848
Yesss ofcourse I have the pre releaseee!

Here is the line from the Sarniee.

Line 20: [Error] (20:16): Unknown identifier 'TabExists' in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

Alright, I don't know why you keep getting that error, but try this.

When Sandwich.scar opens with the error, delete the whole script, and replace it with this:


//-----------------------------------------------------------------//
//--               Scar Standard Resource Library                --//
//--                » Sandwich Solver Routines                   --//
//-----------------------------------------------------------------//
// * function Sandwich_InRandom: Boolean;                          // * by Nielsie95
// * function Sandwich_InMenu: Boolean;                            // * by Nielsie95
// * function Sandwich_SolveQuestion(s: string): Boolean;          // * by Nielsie95
// * function SolveSandwichLady: Boolean;                          // * by Nielsie95
//-----------------------------------------------------------------//


{*******************************************************************************
function Sandwich_InRandom: Boolean;
by: Nielsie95
Description: Checks if we're in the Sandwich Lady random.
*******************************************************************************}

function Sandwich_InRandom: Boolean;
begin
  Result := (not(TabExists(tab_Inv)));
end;

{*******************************************************************************
function Sandwich_InMenu: Boolean;
by: Nielsie95
Description: Returns True if the sandwich option screen is open.
*******************************************************************************}

function Sandwich_InMenu: Boolean;
begin
  Result := SimilarColors(GetColor(502, 22), 8042720, 3);
end;

{*******************************************************************************
function Sandwich_SolveQuestion(s: string): Boolean;
by: Nielsie95
Description: Checks and Picks the required food item.
*******************************************************************************}

function Sandwich_SolveQuestion(s: string): Boolean;
var
  i, x, y, t: Integer;
  p, z: TPointArray;
  q: T2DPointArray;
  b: TBox;
  Info: TVariantArray;
begin
  Result := False;

  case s of
    'baguette', 'square sandwich', 'triangle sandwich':
        Info := [3631225, 24, 300, 0.03, 0.45];
    'roll', 'bread roll':
        Info := [1540514, 20, 400, 0.02, 0.16];
    'meat pie', 'pie':
        Info := [5264481, 25, 400, 0.25, 0.35];
    {'meat pie',} 'doughnut':
        Info := [6014428, 10, 400, 0.02, 2.37];
    'kebab':
        Info := [4091012, 25, 150, 0.02, 0.5];
    'chocolate bar':
        Info := [1914204, 15, 150, 0.04, 0.14];
    else
    begin
      WriteLn('Sandwich Lady: Unknown target: '+s+'!');
      CloseWindow;
      Exit;
    end;
  end;
  SetColorSpeed2Modifiers(Info[3], Info[4]);

  case s of
    'kebab', 'chocolate bar', 'roll', 'bread roll', 'meat pie', 'pie', 'doughnut':
      begin
        t := GetSystemTime;
        while (not Result) and ((GetSystemTime - t) < 15000) and
              Sandwich_InMenu do
        begin
          FindColorsTolerance(p, Info[0], 60, 115, 475, 275, Info[1]);
          if (Length(p) < Info[2]) then Continue;
          q := SplitTPAEx(p, 3, 3);
          SortATPASize(q, True);
          for i := 0 to High(q) do
          begin
            if (Length(q[i]) < Info[2]) then Break;
            b := GetTPABounds(q[i]);
            if (not InRange(b.x2 - b.x1, 10, 65) and InRange(b.y2 - b.y1, 10, 65)) then Continue;
            MiddleTPAEx(q[i], x, y);
            if IntInBox(x, y, IntToBox(83, 135, 460, 270)) then
            begin
              //WriteLn(Length(q[i]));
              Mouse(x, y, 6, 6, True);
              x := GetSystemTime;
              while Sandwich_InMenu and ((GetSystemTime - x) < 15000) do Wait(100);
              Result := True;
              Break;
            end;
          end;
          Wait(60);
        end;
      end;
    'baguette', 'square sandwich', 'triangle sandwich':
      begin
        t := GetSystemTime;
        while ((GetSystemTime - t) < 15000) and Sandwich_InMenu do
        begin
          FindColorsTolerance(z, Info[0], 60, 115, 475, 275, Info[1]);
          if (Length(z) < Info[2]) then Continue;
          q := SplitTPAEx(z, 5, 5);
          SortATPASize(q, True);
          x := 0;
          for i := 0 to High(q) do
            if (Length(q[i]) > 200) then
              Inc(x);
          if (x > 2) then
          begin
            SetLength(z, 3);
            y := 0;
            for i := 0 to High(q) do
              if (Length(q[i]) > 200) then
              begin
                z[y] := MiddleTPA(q[i]);
                Inc(y);
                if (y > 2) then Break;
              end;
            Break;
          end;
          Wait(60);
        end;

        if (Length(z) = 3) then
        begin
          t := GetSystemTime;
          while ((GetSystemTime - t) < 15000) and (Length(z) > 1) do
          begin
            for i := 0 to High(z) do
            begin
              if (s = 'baguette') then
                if (CountColorTolerance(954823, z[i].x - 20, z[i].y - 20, z[i].x + 20, z[i].y + 20, 25) > 75) then
                begin
                  Swap(z[i], z[High(z)]);
                  SetLength(z, Length(z) -1);
                  Continue;
                end;
              FindColorsTolerance(p, Info[0], z[i].x - 40, z[i].y - 40, z[i].x + 40, z[i].y + 40, Info[1]);
              if (Length(p) > 800) then
              begin
                q := SplitTPAEx(p, 3, 3);
                SortATPASize(q, True);
                z[i] := MiddleTPA(p);
                if (Length(q[0]) > 1800) then
                  if (s = 'square sandwich') then
                  begin
                    Swap(z[0], z[i]);
                    SetLength(z, 1);
                    Break;
                  end
                  else
                  begin
                    Swap(z[i], z[High(z)]);
                    SetLength(z, Length(z) -1);
                    Continue;
                  end;
                b := GetTPABounds(q[0]);
                if (((b.x2 - b.x1) > 75) and ((b.y2 - b.y1) < 20)) or
                   (((b.y2 - b.y1) > 75) and ((b.x2 - b.x1) < 20)) then
                  if (s = 'baguette') then
                  begin
                    Swap(z[0], z[i]);
                    SetLength(z, 1);
                    Break;
                  end
                  else
                  begin
                    Swap(z[i], z[High(z)]);
                    SetLength(z, Length(z) -1);
                    Continue;
                  end;
              end;
            end;
            Wait(60);
          end;
        end
        else
        begin
          WriteLn('Could not find 3 possible options!');
          CloseWindow;
          Exit;
        end;
        if (Length(z) = 1) then
        begin
          Mouse(z[0].x, z[0].y, 6, 6, True);
          x := GetSystemTime;
          while Sandwich_InMenu and ((GetSystemTime - x) < 15000) do Wait(100);
          Result := True;
        end;
      end;
  end;
end;

{*******************************************************************************
function SolveSandwichLady: Boolean;
by: Nielsie95
Description: Solves the Sandwich Lady random.
*******************************************************************************}

function SolveSandwichLady: Boolean;
var
  x, y, t, cts, deg: Integer;
  s: string;
  aci: TAutoColorInfo;
begin
  Result := False;
  if (not Sandwich_InRandom) then
  begin
    WriteLn('Not in Sandwich Lady!');
    Exit;
  end;

  with aci do
  begin
    UpText := 'Talk';
    MaxDist := 15;
    Color := 8620738;
    HueMod := 0.06;
    SatMod := 0.81;
    LumTol := 19;
    MinR := 135; MaxR := 232;
    MinG := 99; MaxG := 193;
    MinB := 92; MaxB := 191;
    MinX := 16.67; MaxX := 61.12;
    MinY := 15.12; MaxY := 58.43;
    MinZ := 12.38; MaxZ := 56.78;
    MinCount := 100;
  end;

  cts := GetColorToleranceSpeed;
  deg := Round(rs_GetCompassAngleDegrees);
  MakeCompass('n');
  SetAngle(True);
  ColorToleranceSpeed(2);
  SetColorSpeed2Modifiers(0.2, 0.2);
  t := GetSystemTime;

  SetAngle(True);
  while (not FindColorTolerance(x, y, 2070783, 130, 260, 215, 315, 2)) and
        ((GetSystemTime - t) < 40000) do
  begin
    Wait(1500);
    if AreTalking then
    begin
      if (not ClickContinue(True,True)) then
        FindNPCChatText('ready to try', ClickLeft);
    end
    else if FindObjRecordEx(x, y, aci, MSX1, MSY1, MSX2, MSY2, False, False) then
    begin
      Mouse(x, y, 0, 0, False);
      Wait(100 + Random(200));
      ChooseOption('Talk');
      Wait(500);
      FFlag(0);
      x := GetSystemTime;
      while (not AreTalking) and ((GetSystemTime - x) < 5000) do Wait(100);
    end;
  end;

  if FindColorTolerance(x, y, 2070783, 130, 260, 215, 315, 2) then
  begin
    s := rs_GetUpTextAt(x, y - 2);
    s := Trim(LowerCase(Between('Have a', 'for free', s)));
  end;
  if (s = '') then
  begin
    WriteLn('Sandwich Lady: Could not find target!');
    SetColorSpeed2Modifiers(0.2, 0.2);
    ColorToleranceSpeed(cts);
    CloseWindow;
    Exit;
  end;
  WriteLn('Sandwich Lady: Target: '+s);

  if Sandwich_SolveQuestion(s) then
  begin
    if Sandwich_InMenu then
      CloseWindow;

    with aci do
    begin
      UpText := 'orta';
      MaxDist := 15;
      Color := 8565144;
      HueMod := 0.10;
      SatMod := 0.45;
      LumTol := 15;
      MinR := 112; MaxR := 193;
      MinG := 141; MaxG := 210;
      MinB := 90; MaxB := 173;
      MinX := 18.35; MaxX := 52.00;
      MinY := 23.59; MaxY := 59.81;
      MinZ := 13.46; MaxZ := 47.84;
      MinCount := 100;
    end;

    t := GetSystemTime;
    while Sandwich_InRandom and ((GetSystemTime - t) < 20000) do
    begin
      Wait(100);
      if AreTalking then
        ClickContinue(True,True)
      else if FindObjRecordEx(x, y, aci, MSX1, MSY1, MSX2, MSY2, False, False) then
      begin
        Mouse(x, y, 0, 0, False);
        Wait(100 + Random(200));
        ChooseOption('Enter');
        Wait(500);
        FFlag(0);
        Wait(4000);
      end;
    end;
  end;

  Result := (not Sandwich_InRandom);
  MakeCompass(IntToStr(Deg));
  SetColorSpeed2Modifiers(0.2, 0.2);
  ColorToleranceSpeed(cts);
end;

See what happens.

Kris7848

2010-02-04 14:14:04

Nope I still have the same Error in line 20 :|

Im going :Tools: Options: Subversion: Checkout.
Then, Moving the Move the file that needs to go to the plugins?

What am I doing wrong?
Hmmmmm

Coh3n

2010-02-04 14:17:19

From: Kris7848
Nope I still have the same Error in line 20 :|

Im going :Tools: Options: Subversion: Checkout.
Then, Moving the Move the file that needs to go to the plugins?

What am I doing wrong?
Hmmmmm

The way you're doing it gets you the Pubic SVN which isn't what you want. Follow my guide exactly and you should be fine.

Kris7848

2010-02-04 14:26:25

Just did your guide for the open dev, and now I got another line :| It's Prison Pete, im thinking could it be something to do with my plugins?
Main script:
Line 268: [Error] (20007:1): Unknown identifier 'Pete_AnalyzeAnimal' in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\PrisonPete.scar
Failed when compiling
Prison Pete:
Line 28: [Error] (28:28): Unknown identifier 'MMX1' in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\PrisonPete.scar

Kris.

Dynamite

2010-02-04 14:29:10

Yep, move your plugins.

Coh3n

2010-02-04 14:29:19

From: Kris7848
Just did your guide for the open dev, and now I got another line :| It's Prison Pete, im thinking could it be something to do with my plugins?
Main script:
Line 268: [Error] (20007:1): Unknown identifier 'Pete_AnalyzeAnimal' in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\PrisonPete.scar
Failed when compiling
Prison Pete:
Line 28: [Error] (28:28): Unknown identifier 'MMX1' in script C:\Documents and Settings\Kris\My Documents\Downloads\includes\SRL\SRL\Core\AntiRandoms\PrisonPete.scar

Kris.

Got it running!
Will post a Proggie soon enough !

Thanks you two!

Kris.

Coh3n

2010-02-04 15:10:45

From: Kris7848
Got it running!
Will post a Proggie soon enough !

Thanks you two!

Kris.

No problem. Oh and in the future, try to avoid double posting. Just edit you last post. ;)

Kris7848

2010-02-04 15:38:36

ooh gosh did 3 in a row, sorry about that! :|

Coh3n

2010-02-04 15:59:44

From: Kris7848
ooh gosh did 3 in a row, sorry about that! :|

Lol don't worry. :p Just remember for next time.

Kris7848

2010-02-04 17:51:56

Haha I will do!

Was Just wondering when I get a random it fails and terminates the script, if there anything I can add to make the script be able to do the randoms?

Thanks kris.

i luffs yeww

2010-02-04 21:56:05

From: Kris7848
Haha I will do!

Was Just wondering when I get a random it fails and terminates the script, if there anything I can add to make the script be able to do the randoms?

Thanks kris.

There are problems with SRL's randoms due to tabs and such. :) It's not the script. You just have to wait until it's all updated (SRL). ^^

pyroryan

2010-02-06 01:31:58

** Warning in Bank_Logs: Couldn't open bank after 20 tries, logging out.**
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.18 =============================]
[ ]
[ You have chosen to cut Oak trees. ]
[ ]
[ Ran For: 7 Hours, 46 Minutes and 23 Seconds ]
[ Loads Done: 165 ]
[ Logs Chopped: 4532 ]
[ Levels Gained: 2 ]
[ Exp Gained: 169950 ]
[ Breaks: 6 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed

Found my character to the left of the bank, south of the stalls.

Also, I can't get the custom stats to work in firefox. It works in IE though.

Coh3n

2010-02-06 09:40:42

From: pyroryan
** Warning in Bank_Logs: Couldn't open bank after 20 tries, logging out.**
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.18 =============================]
[ ]
[ You have chosen to cut Oak trees. ]
[ ]
[ Ran For: 7 Hours, 46 Minutes and 23 Seconds ]
[ Loads Done: 165 ]
[ Logs Chopped: 4532 ]
[ Levels Gained: 2 ]
[ Exp Gained: 169950 ]
[ Breaks: 6 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed

Found my character to the left of the bank, south of the stalls.

Also, I can't get the custom stats to work in firefox. It works in IE though.

Ah well, it's still a good report. And what do you mean you can't get the stats the work? Like the page doesn't load, or what?

pyroryan

2010-02-06 13:37:10

From: Coh3n
And what do you mean you can't get the stats the work? Like the page doesn't load, or what?

I get a bunch of gibberish about a page long with weird symbols and stuff. Then when I copy the same url in IE it works fine. May just be my firefox though.

Coh3n

2010-02-06 14:24:07

From: pyroryan
I get a bunch of gibberish about a page long with weird symbols and stuff. Then when I copy the same url in IE it works fine. May just be my firefox though.

Lol that's weird. It works just fine in my firefox. :confused:

mormonman

2010-02-06 16:03:35

Your multiplayer proggy doesn't show the nick…

Coh3n

2010-02-06 16:05:47

From: mormonman
Your multiplayer proggy doesn't show the nick…

Lol, so it doesn't. Not sure how that got erased, I'm pretty sure it showed it when I tested, but I haven't tested multiplayer since I released the script. No one really uses it. Either way, I'll be sure to fix it as soon as I can.

Thanks for noticing that. :)

mormonman

2010-02-06 16:06:16

From: Coh3n
Lol, so it doesn't. Not sure how that got erased, I'm pretty sure it showed it when I tested, but I haven't tested multiplayer since I released the script. No one really uses it. Either way, I'll be sure to fix it as soon as I can.

Thanks for noticing that. :)

I'm using it… :P

Coh3n

2010-02-06 16:06:59

From: mormonman
I'm using it… :P

:D I'll be sure to fix that right up for you then.

EDIT: Try revision 19, I didn't test it because I have to go. Let me know if it works. :)

mormonman

2010-02-06 16:12:07

My plan is to take the lead away from tara. He has been number 1 for long enough!

Coh3n

2010-02-06 16:12:52

From: mormonman
My plan is to take the lead away from tara. He has been number 1 for long enough!

Haha! Sounds good to me. ;)

Sex

2010-02-06 16:14:45

From: mormonman
My plan is to take the lead away from tara. He has been number 1 for long enough!

That is not even a plan it is a goal :p.

mormonman

2010-02-06 16:25:48

From: Sex
That is not even a plan it is a goal :p.

:duh: You need a plan to achieve your goal.

Sex

2010-02-06 16:28:42

Yes I know..
And you have no plan. Well not from reading that post only.
Goal: To get #1 or whatever.
Plan: Auto with Coh3n's script or whatever you were planning on doing to achieve your goal of getting #1..

mormonman

2010-02-06 17:13:41

From: Sex
Yes I know..
And you have no plan. Well not from reading that post only.
Goal: To get #1 or whatever.
Plan: Auto with Coh3n's script or whatever you were planning on doing to achieve your goal of getting #1..

Goal: Stat leader
Plan: Revive my army… woodcutters, miners, and fighters.

Sex

2010-02-06 17:28:34

There that's good :). I wasn't being serious or anything though so don't take it like that :D.

grats

2010-02-07 06:53:35

This is the most stable script I have ever ran you are very good!

Coh3n

2010-02-07 09:57:02

From: dxzgxz
This is the most stable script I have ever ran you are very good!

Lol, thanks! ;)

grats

2010-02-07 14:38:39

From: Coh3n
Lol, thanks! ;)

One thing if maybe a suggestion, it does use more computer usage than any other script by far from all of the random searching it does, and when it does the random searches it lags smart and then because it lags it starts thinking theres a loading screen.. for a random… so it checks for more randoms and it lags itself with that kind of loop, can you put a time on the random checking like something seconds etc? ( I am not so great at scripting)

Coh3n

2010-02-07 16:54:32

From: dxzgxz
One thing if maybe a suggestion, it does use more computer usage than any other script by far from all of the random searching it does, and when it does the random searches it lags smart and then because it lags it starts thinking theres a loading screen.. for a random… so it checks for more randoms and it lags itself with that kind of loop, can you put a time on the random checking like something seconds etc? ( I am not so great at scripting)

Yes I edited this a while ago, I'll make the wait longer when I get the time.

grats

2010-02-08 06:00:35

From: Coh3n
Yes I edited this a while ago, I'll make the wait longer when I get the time.

Thanks lots =] this is a very good script I wish the tutorial runner would work for me so I can get more to do this :P

Abbott

2010-02-08 10:17:32

I updated to Rev 19 and it still cant find the dragon hatchet :c

Coh3n

2010-02-08 11:34:42

From: Abbott
I updated to Rev 19 and it still cant find the dragon hatchet :c

That's because I haven't changed the DTM. I need an account with a Dragon hatchet on it, so I can make a working DTM.

Kris7848

2010-02-08 13:37:16

Got a quick question, Script it working great! Had some little minors when it chops a normal log and cant find it's way back to the bank, but thats very rare.

Just having difficulty with randoms at the moment, it cant seem to solve them ever, any advice here Co?

Thanks, Kris.

P.S. Cant get the script working after the update, my SMART is flicking and it just wont repsond, any suggestions?

Coh3n

2010-02-08 14:10:15

From: Kris7848
Got a quick question, Script it working great! Had some little minors when it chops a normal log and cant find it's way back to the bank, but thats very rare.

Just having difficulty with randoms at the moment, it cant seem to solve them ever, any advice here Co?

Thanks, Kris.

P.S. Cant get the script working after the update, my SMART is flicking and it just wont repsond, any suggestions?

Load RS in your internet window, and manually set the graphics to the lowest possible, then try again.

The normal log bug really bugs me because I can't do anything about it. SCAR just get's the uptext mixed up. And for the randoms, there's not much I can do either. Either the SRL solvers will work or they don't. I suggestion would be to learn to script, and write your own solvers. :p

Kris7848

2010-02-08 14:12:45

Hahaaa, if only you knew how smart I was -.-…..

Coh3n

2010-02-08 14:13:12

From: Kris7848
Hahaaa, if only you knew how smart I was -.-…..

Lol you can always learn.

Kris7848

2010-02-08 14:18:51

Im a builder for a reason :P lmaoooo!

Coh3n

2010-02-09 11:13:12

From: Kris7848
Im a builder for a reason :P lmaoooo!

;)

Please update to revision 20!

- Updated the Dragon hatchet DTM
- Increased the wait time when checking for randoms -> hopefully this will decrease lag some people are experiencing

Enjoy,
Coh3n

Kris7848

2010-02-09 14:38:36

Hey, got the script working, put it on "Safe Mode" in the RS Login screen.

Just wondering, does any one know what level you need to be before the level 26 Jail Guards stop attacking you if you try to cut oaks, might cut them till I can afford a Dragon Axe then go members

Coh3n

2010-02-09 15:17:06

From: Kris7848
Hey, got the script working, put it on "Safe Mode" in the RS Login screen.

Just wondering, does any one know what level you need to be before the level 26 Jail Guards stop attacking you if you try to cut oaks, might cut them till I can afford a Dragon Axe then go members

I have no idea if it's still like this, but I remember reading somewhere that your combat level needs to be twice the NPC's level + 2, for them not to be aggressive.

So, since the Guards level is 26, you would need to be level 54 for them not to attack you.

grats

2010-02-09 17:35:20

The new update is it extremely laggy or is it just me..? I have 2.6ghz processor and 2 gigs of ram dedicated to running only that script and it lags

Coh3n

2010-02-09 17:52:34

From: dxzgxz
The new update is it extremely laggy or is it just me..? I have 2.6ghz processor and 2 gigs of ram dedicated to running only that script and it lags

Hmm not sure. Are you set to Safe Mode?

grats

2010-02-10 00:59:56

From: Coh3n
Hmm not sure. Are you set to Safe Mode?

Yes.. its always been very laggy and smart doesnt even work unless youre in safe mode but after the update it starts chopping then the screen freezes and then it unfreezes every like 10 seconds and I get like 5 more logs…

it works just very laggy lol.

Coh3n

2010-02-10 11:06:58

From: dxzgxz
Yes.. its always been very laggy and smart doesnt even work unless youre in safe mode but after the update it starts chopping then the screen freezes and then it unfreezes every like 10 seconds and I get like 5 more logs…

it works just very laggy lol.

Okay.

Is anyone else experiencing this problem?

grats

2010-02-10 15:57:34

From: Coh3n
Okay.

Is anyone else experiencing this problem?

I really think (because no other scripts do this except yours) that the scanning for random events spam really lags it, does it spam it for you?

When it scans it says that in the debug box like 50 times in a row non stop I mean the script works but I think it would run faster without it, since the SRL isnt working now and randoms dont really get completed I usually do them myself when my guys get sucked into one

Coh3n

2010-02-10 15:59:03

From: dxzgxz
I really think (because no other scripts do this except yours) that the scanning for random events spam really lags it, does it spam it for you?

When it scans it says that in the debug box like 50 times in a row non stop I mean the script works but I think it would run faster without it, since the SRL isnt working now and randoms dont really get completed I usually do them myself when my guys get sucked into one

I made the wait a few seconds the last time I updated. Have you not updated to the latest version?

Frement

2010-02-10 15:59:59

Well its still good to check for randoms, else the script would just go on. Maybe a lil wait time between random checks. (Havent checked that part of the script.)

grats

2010-02-10 16:10:54

From: Coh3n
I made the wait a few seconds the last time I updated. Have you not updated to the latest version?

Last night, was it updated since then?

Coh3n

2010-02-10 16:23:55

From: dxzgxz
Last night, was it updated since then?

No, but the "Scanning for randoms…" message should only come up every few seconds. I'll look at it again though.

EDIT: Okay, I edited it a bit, hopefully it gets rid of your problems. Let me know how it goes.

grats

2010-02-10 16:41:24

From: Coh3n
No, but the "Scanning for randoms…" message should only come up every few seconds. I'll look at it again though.

EDIT: Okay, I edited it a bit, hopefully it gets rid of your problems. Let me know how it goes.

Yes a noticeable difference I will let it run for a while then post a proggie thanks a lot

Coh3n

2010-02-10 16:43:37

From: dxzgxz
Yes a noticeable difference I will let it run for a while then post a proggie thanks a lot

Okay, but does it still say it's checking for randoms in the debug box? Because I still want it to find the randoms when they come (even if they don't get solved).

grats

2010-02-10 16:45:48

From: Coh3n
Okay, but does it still say it's checking for randoms in the debug box? Because I still want it to find the randoms when they come (even if they don't get solved).

Yes it does, it checks for them when ever smart lags a little, is it set to check for randoms when it gets the *loading* to a new zone as if someone snatched the player and brought him to the random event? because thats when it checks for them…

it now is picking new trees extremely fast after one is chopped down compared to before

Coh3n

2010-02-10 16:48:52

From: dxzgxz
Yes it does, it checks for them when ever smart lags a little, is it set to check for randoms when it gets the *loading* to a new zone as if someone snatched the player and brought him to the random event? because thats when it checks for them…

it now is picking new trees extremely fast after one is chopped down compared to before

As long as it's checking for them.

Oh, so the chopping is faster? That's good then. :p

grats

2010-02-10 16:52:00

From: Coh3n
As long as it's checking for them.

Oh, so the chopping is faster? That's good then. :p

Yeah I forgot to say theres one problem that is a real problem besides the old lag… it was the new update with safe mode the bot will click standard mode so after it selects that I have to pause it and manually change back to safe mode then play and it works

Coh3n

2010-02-10 20:32:37

From: dxzgxz
Yeah I forgot to say theres one problem that is a real problem besides the old lag… it was the new update with safe mode the bot will click standard mode so after it selects that I have to pause it and manually change back to safe mode then play and it works

I believe that bug was updated by IceFire last night. Just update your SRL and you should be fine.

Juuso

2010-02-12 12:13:32

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.18 =============================]
[ ]
[ Ran For: 10 Hours, 37 Minutes and 39 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ XXX 234 6552 0 0 10 ]
[ XXX 0 0 0 0 0 ]
[ ]
[=================================================================]
[=================================================================]

Cheers mate, got it working. Failed on mime.

iJake

2010-02-12 12:46:04


[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 42 Minutes and 8 Seconds                          ]
[      Loads Done: 7                                              ]
[      Logs Chopped: 189                                          ]
[      Levels Gained: 4                                           ]
[      Exp Gained: 12758                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

this failed on 'leo random' ):

Scaper

2010-02-12 14:46:47

were is the script?

Coh3n

2010-02-12 16:40:28

From: Juuso
Cheers mate, got it working. Failed on mime.

Very nice run! :) Can't complain about 10 hours.

From: iJake


[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 42 Minutes and 8 Seconds                          ]
[      Loads Done: 7                                              ]
[      Logs Chopped: 189                                          ]
[      Levels Gained: 4                                           ]
[      Exp Gained: 12758                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

this failed on 'leo random' ):

Wow a random after only 42 minutes. That's unlucky. Lol.

From: Scaper
were is the script?

What? You get it via SVN checkout. Did you not read the first post?

grats

2010-02-12 17:00:17

From: Scaper
were is the script?

It's where he said "download:"

btw the script runs much nicer now that you changed it a bit coh3n

I think my stats password is wrong or something because every script says it is LOL… I have to get to the bottom of that today

Coh3n

2010-02-12 23:09:57

From: dxzgxz
btw the script runs much nicer now that you changed it a bit coh3n

I think my stats password is wrong or something because every script says it is LOL… I have to get to the bottom of that today

Yes you do! :p

And I'm glad it's working better. Let me ask you this, when it banks, does it wait a few seconds after closing the bank window? Sometimes it does for me, and I'm not sure why.

Thanks,
Coh3n

iJake

2010-02-13 08:57:53

here's another run:


[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 55 Minutes and 36 Seconds                ]
[      Loads Done: 30                                             ]
[      Logs Chopped: 810                                          ]
[      Levels Gained: 5                                           ]
[      Exp Gained: 54675                                          ]
[      Breaks: 2                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

^ I forgot to change number of logs wanted to cut so it stopped. Nice script! :)

Coh3n

2010-02-13 15:08:13

From: iJake
here's another run:


[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 55 Minutes and 36 Seconds                ]
[      Loads Done: 30                                             ]
[      Logs Chopped: 810                                          ]
[      Levels Gained: 5                                           ]
[      Exp Gained: 54675                                          ]
[      Breaks: 2                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

Nice report! Added to the first post. ;)

sk80rdie76

2010-02-13 17:43:53


** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Couldn't open bank after 20 tries, logging out.**
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 25 Minutes and 25 Seconds                ]
[      Loads Done: 53                                             ]
[      Logs Chopped: 1484                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 100170                                         ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

grats

2010-02-13 18:28:48

From: Coh3n
Yes you do! :p

And I'm glad it's working better. Let me ask you this, when it banks, does it wait a few seconds after closing the bank window? Sometimes it does for me, and I'm not sure why.

Thanks,
Coh3n

yes it does everytime that I watch it

hey… my stats password is correct but no script logs my stuff on the website is it broken?

Bad Boy JH

2010-02-14 00:12:31

In this bit


  STATS_ID   = '59'; // Your SRL Stats ID.
  STATS_PASS = 'helloworld1'; // Your SRL Stats Password.
  RANDOM_SOUND = True; // True = a sound when a random is found.
  BREAK_TIME   = 15;   // How long to break for (in minutes).
                       // Script will +/- a random 5 minutes.

are you sure you are using your ID and not your username?

Coh3n

2010-02-14 13:16:27

From: sk80rdie76


** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Couldn't open bank after 20 tries, logging out.**
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 25 Minutes and 25 Seconds                ]
[      Loads Done: 53                                             ]
[      Logs Chopped: 1484                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 100170                                         ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

Where was your character when it stopped?

Seizure

2010-02-15 19:52:39

I really hate to be a nuisance, but I don't completely understand where you make the folder to do the checkout. I've read your guide (very helpful by the way :D ) and looked through most of the posts. Still, I'm confused about the location.

I'm sorry if this seems noobish, Vista finally died out on me, so I was off my computer for several months.

grats

2010-02-15 20:02:58

From: Seizure
I really hate to be a nuisance, but I don't completely understand where you make the folder to do the checkout. I've read your guide (very helpful by the way :D ) and looked through most of the posts. Still, I'm confused about the location.

I'm sorry if this seems noobish, Vista finally died out on me, so I was off my computer for several months.

Make it where ever you want, mine is on my desktop named "chop"

Seizure

2010-02-15 20:06:36

From: dxzgxz
Make it where ever you want, mine is on my desktop named "chop"

:duh::duh::duh:
Thanks, I was a bit confused on how exactly to run it if I checked it out!

grats

2010-02-15 20:09:34

From: Seizure
:duh::duh::duh:
Thanks, I was a bit confused on how exactly to run it if I checked it out!

^.- it'll have a sound file that comes with it for the script to play if you get a random but I usually keep it false

Seizure

2010-02-15 20:19:46

Failed when compiling
Line 5: [Error] (5:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\SCAR 3.22\includes\srl\srl\Misc\Smart.scar

Gosh darn errors!

grats

2010-02-15 20:25:52

From: Seizure

Failed when compiling
Line 5: [Error] (5:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\SCAR 3.22\includes\srl\srl\Misc\Smart.scar

Gosh darn errors!

~.~ that error is in the new smart download I had to have someone set it up for me and change my smart

http://www.villavu.com/forum/showthread.php?t=54763

that thread has the fix for all those smart errors in it

Coh3n

2010-02-16 00:17:47

From: dxzgxz
~.~ that error is in the new smart download I had to have someone set it up for me and change my smart

http://www.villavu.com/forum/showthread.php?t=54763

that thread has the fix for all those smart errors in it

Moving your plugins should also get rid of that error.

grats

2010-02-16 11:29:13

From: Coh3n
Moving your plugins should also get rid of that error.

Didn't work for me at all =[ the guy had to rewrite part of the smart

Coh3n

2010-02-16 11:47:26

From: dxzgxz
Didn't work for me at all =[ the guy had to rewrite part of the smart

From reading that other thread, it looks like the problem was in SRL. I haven't updated, but maybe the newest version of SRL has it fixed. The Dev's are usually really good when it comes to fixing compiling errors like that.

Seizure

2010-02-16 21:22:58

Big Bug!
I'm sure this is just a SMART error, but the script compiles and opens smart with the Runescape main menu. When Runescape finishes about 80% of its loading, everything inside becomes very flashy. And the script doesn't work on top of that (It does not log in)
EDIT:
Ignore that! I didn't have it in safe mode!!

Double EDIT!!!

Fails the Freaky forester Random event… Good thing I was watching!

Coh3n

2010-02-16 23:27:16

From: Seizure
Big Bug!
I'm sure this is just a SMART error, but the script compiles and opens smart with the Runescape main menu. When Runescape finishes about 80% of its loading, everything inside becomes very flashy. And the script doesn't work on top of that (It does not log in)
EDIT:
Ignore that! I didn't have it in safe mode!!

Double EDIT!!!

Fails the Freaky forester Random event… Good thing I was watching!

Yeah, that's what I was going to say. :p

Also, the Forester random worked for me earlier today, so it does work sometimes. :)

Seizure

2010-02-17 16:47:10

From: Coh3n
Yeah, that's what I was going to say. :p

Also, the Forester random worked for me earlier today, so it does work sometimes. :)

Do you think that's the scripts problem or SRL?

Coh3n

2010-02-17 16:49:08

Srl.

xSaintias

2010-02-17 18:30:12

Yo. Thanks for the script. Ive gotten about 10k willows off this and like 6-7 lvls…. Should post some proggies soon. However, one problem. After gaining a level and becoming level 77 (hooray?) the script stopped working. Now, when I start it, it searches for my level then reports it as -1 (Lolz =D) and stops the script saying that i need 30 woodcutting or more to chop willows…. Not sure what happened.

EDIT: Also, Stats is not working for me….
I know I have the right username and password, but it never puts any of my stats on SMS….
TY

Coh3n

2010-02-17 20:24:35

From: xSaintias
Yo. Thanks for the script. Ive gotten about 10k willows off this and like 6-7 lvls…. Should post some proggies soon. However, one problem. After gaining a level and becoming level 77 (hooray?) the script stopped working. Now, when I start it, it searches for my level then reports it as -1 (Lolz =D) and stops the script saying that i need 30 woodcutting or more to chop willows…. Not sure what happened.

EDIT: Also, Stats is not working for me….
I know I have the right username and password, but it never puts any of my stats on SMS….
TY

Sometimes the SRL function that reads numbers get's them mixed up or can't read them. That probably just happened when you got to level 77. Replace the Setup_Player procedure with this:


procedure Setup_Player;
var
  Tree: TTree;
begin
  LoginPlayer;
  SetAngle(True);
  Tree := Load_TreeRecords;
  
  {startLevel := GetSkillLevel('woodcutting');
  Writeln('Current Woodcutting Level: ' + IntToStr(startLevel) + '.');
  
  if (startLevel < Tree.Req) then
  begin
    srl_Warn('Setup_Player', 'You need at least ' + IntToStr(Tree.Req)
             + ' in Woodcutting to cut ' + Capitalize(Players[CurrentPlayer].Strings[P_TREE])
             + 's. ', warn_AllVersions);
             
    Next_Player;
  end;}
  
  if (Find_Hatchet) then
    Writeln('Found Hatchet!')
  else
  begin
    srl_Warn('Find_Hatchet', 'Didn''t find hatchet, logging out. ',
             warn_AllVersions);
    Next_Player;
  end;
end;

For the stats.. You need to use your ID NOT your username. Your ID is found in the profile page when you log in to the stats website.

Seizure

2010-02-17 21:21:13

Ok bugs… It seems that All randoms fail in this script =[
Not sure what else to say other than its awesome. Proggies soon!

Dynamite

2010-02-17 21:46:28

From: Seizure
Ok bugs… It seems that All randoms fail in this script =[
Not sure what else to say other than its awesome. Proggies soon!

It is not the script that is failing to solve randoms.
It is srl.

sk80rdie76

2010-02-17 23:06:48


[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 3 Hours, 1 Minutes and 45 Seconds                 ]
[      Loads Done: 72                                             ]
[      Logs Chopped: 2016                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 136080                                         ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]

manually stopped

Coh3n

2010-02-17 23:52:30

Nice! :) I think this is the longest I've gone without updating the script as it is still working. Makes my job pretty easy.

grats

2010-02-18 01:28:43

From: Coh3n
Nice! :) I think this is the longest I've gone without updating the script as it is still working. Makes my job pretty easy.

Yeah it's workin for sure…

http://scriptmanager.freehostia.com/profile.php?uid=203

Bonfield

2010-02-18 02:06:47

[php]
** Warning in Chop_Trees: Couldn't find trees after 50 tries, logging out. **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.21 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 11 Hours, 56 Minutes and 15 Seconds ]
[ Loads Done: 211 ]
[ Logs Chopped: 5908 ]
[ Levels Gained: 2 ]
[ Exp Gained: 398790 ]
[ Breaks: 9 ]
[ ]
[=================================================================]
[=================================================================]
[/php]

stuck in the pillory random

great script, how come i cant see my stats?

http://scriptmanager.freehostia.com/profile.php[?uid=46/url]

Coh3n

2010-02-18 02:37:44

From: dxzgxz
Yeah it's workin for sure…

http://scriptmanager.freehostia.com/profile.php?uid=203

You can run two scripts at once? :eek:

From: Bonfield

stuck in the pillory random

great script, how come i cant see my stats?

http://scriptmanager.freehostia.com/profile.php[?uid=46/url]

Awesome report - added to the first post. :)

And, I don't know why you can't see them. When I go to the link all I see is a bunch of symbols. You may want to ask Frement about that as he's the one hosting the signatures.

Seizure

2010-02-18 07:58:25

***** STR: FOUND RANDOM: 'Molly's Evil Twin' *****
***** STR: 'Molly's Evil Twin' RANDOM SOLVING FAILED! *****
Found Random! 
** Warning in Setup_MainLoop: All Players are now inactive, terminating script. **
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 3 Hours, 48 Minutes and 27 Seconds                ]
[      Loads Done: 81                                             ]
[      Logs Chopped: 2268                                         ]
[      Levels Gained: 1                                           ]
[      Exp Gained: 153090                                         ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

Proggy at last!
Bad news is the random… =[

Coh3n

2010-02-18 13:55:13

Nice report. :) I'm glad to know that the script is actually detecting the randoms though, so at least there's a chance it'll solve it. Lol.

Seizure

2010-02-18 19:07:59

From: Coh3n
Nice report. :) I'm glad to know that the script is actually detecting the randoms though, so at least there's a chance it'll solve it. Lol.

perhaps a detected random logout update is at hand?

[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 11 Hours, 5 Minutes and 33 Seconds                ]
[      Loads Done: 164                                            ]
[      Logs Chopped: 4591                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 309892                                         ]
[      Breaks: 3                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

same from yesterday, still running!

Coh3n

2010-02-18 19:15:57

From: Seizure
perhaps a detected random logout update is at hand?

[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 11 Hours, 5 Minutes and 33 Seconds                ]
[      Loads Done: 164                                            ]
[      Logs Chopped: 4591                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 309892                                         ]
[      Breaks: 3                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

same from yesterday, still running!

It's suppose to log out if a random fails. I'm pretty sure that's suppose to be built into SRL.

Also, I added that report to the first page. :)

twobac

2010-02-18 22:21:53

Hi Coh3n,

Have now managed to get ur script to work! (After following the set up Tut, people!)

Had the canvas error mentioned below,

From: ruthlesskiller
I tried to run it and after it checks the stats i get this error : [Runtime Error] : Exception: Canvas does not allow drawing in line 429 in script C:\Users\Nicholas\Desktop\SCAR\includes\SRL\SRL\Core\GameTab.scar

I thought, maybe you might add to your first post #1, all the common errors/solutions people get (like on ur setup tut)???

took me a while to read evey post to get to #454 with the answer. just a thought.

Anyway here is my first proggy. I stopped it manually when i realised that it would not take a break until the number of logs had been reached. (might be an idea to mention that also :) )

Next to add multiple players in :) with smaller no of logs to chop. i think my 960 was a bit ambitious. lol

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.21 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 44 Minutes and 37 Seconds ]
[ Loads Done: 8 ]
[ Logs Chopped: 224 ]
[ Levels Gained: 6 ]
[ Exp Gained: 15120 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/PHP]

will post another soon,
BTW
1. what is the longest running proggy you have seen on this script?
2. any chance you can point me towards the Stat id section (so you get the time credit) for the signature on the posts??

Thanks always

:D

Coh3n

2010-02-18 22:30:19

From: twobac
Hi Coh3n,

Have now managed to get ur script to work! (After following the set up Tut, people!)

Had the canvas error mentioned below,

I thought, maybe you might add to your first post #1, all the common errors/solutions people get (like on ur setup tut)???

took me a while to read evey post to get to #454 with the answer. just a thought.

Anyway here is my first proggy. I stopped it manually when i realised that it would not take a break until the number of logs had been reached. (might be an idea to mention that also :) )

Next to add multiple players in :) with smaller no of logs to chop. i think my 960 was a bit ambitious. lol

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.21 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 44 Minutes and 37 Seconds ]
[ Loads Done: 8 ]
[ Logs Chopped: 224 ]
[ Levels Gained: 6 ]
[ Exp Gained: 15120 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/PHP]

will post another soon,
BTW
1. what is the longest running proggy you have seen on this script?
2. any chance you can point me towards the Stat id section (so you get the time credit) for the signature on the posts??

Thanks always

:D

Yeah for that canvas error, you just have to restart SCAR. I will add that to the first post of my guide, thanks. :)

This script does have multiplayer, and it takes breaks. All that is in the player setup section. And, the longest is over 10 hours. There are several on the first post of this thread.

For the stats, when you login (after you've created the stats account), go to the profile page (top right corner), and you'll see "User ID" in bold letters, when your user ID beside it. Just enter that and the password you use to login to the stats site in the space provided in the script, and you're good to go. Here's the link for the stats site - > http://scriptmanager.freehostia.com/index.php

Hopefully that helps.

Cheers,
Coh3n

twobac

2010-02-19 07:27:30

thanks for the info.

here is a multi player proggy

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.21 =============================]
[ ]
[ Ran For: 6 Hours, 30 Minutes and 16 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 2 56 1 0 0 ]
[ wc02 0 0 0 0 0 ]
[ wc03 2 56 2 0 0 ]
[ wc04 0 0 0 0 0 ]
[ wc05 0 0 0 0 0 ]
[ wc06 2 56 1 0 0 ]
[ wc07 0 0 0 0 0 ]
[ wc08 0 0 0 0 0 ]
[ wc09 0 0 0 0 0 ]
[ wc10 0 0 0 0 0 ]
[ wc11 0 0 0 0 0 ]
[ wc12 0 0 0 0 0 ]
[ wc13 0 0 0 0 0 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/PHP]

It does not like finding the bank when cutting oaks. wc01 was ok cutting willows.

[PHP]Player: wc01: Logged in For: 551775 ms.
NextPlayer
SwitchToPlayer(PlayerNo: 1, Active: False);
wc02
One minute has passed…
wc02
One minute has passed…
wc02
One minute has passed…
NextPlayer //Did not try to log wc02 in??
SwitchToPlayer(PlayerNo: 2, Active: False);
wc03
One minute has passed…
wc03
One minute has passed…
wc03
Current Woodcutting Level: 24. //I paused the script for about 30 secs to read the code. then clicked play and wc03 logged in.
…
Cut desired number of logs, logging out…
…proggy…
Player: wc03: Logged in For: 599496 ms.
NextPlayer
SwitchToPlayer(PlayerNo: 3, Active: False);
wc04
One minute has passed…
wc04
One minute has passed…
wc04
One minute has passed…
NextPlayer
SwitchToPlayer(PlayerNo: 4, Active: False);
wc05
One minute has passed…
wc05
One minute has passed…
wc05
One minute has passed…
NextPlayer
SwitchToPlayer(PlayerNo: 5, Active: False);
wc06
One minute has passed…
wc06
Current Woodcutting Level: 44. //Again I paused the script for about 30 secs to read the code. then clicked play and wc06 logged in.
Found Hatchet!
…
[/PHP]

All the remaining players did not log in. all in correct place, but no action by the script on the login screen.

So for the 6 hour proggy, only 40 minutes is actual run time.

also…
Found Reward Item: amp
Found Random!
******** SOLVED LAMP RANDOM ********

I have amened the break time to "BREAK_TIME = 1;"

can you confirm that the break time is the time gap between each player being logged in, I think this is good for single player, but for multi, I would rather turn it off. I changed the following to make it smaller, but off is better for me.
[php]
begin
Writeln('Taking a ' + IntToStr(BREAK_TIME) + ' minute break.');
Logout;
Wait((BREAK_TIME * 60000) + RandomRange(-1000, 1000)); // changed to 1 min from 5
[/php]

Any ideas???

Thanks

Coh3n

2010-02-19 11:31:36

Okay I'll try to explain everything the best I can.

The proggy doesn't line up properly as you can see. I've fixed this and will commit it shortly.
Finding the bank - Does it not find the bank every time it tries? My experience cutting Oaks has worked very well, but some minimap colors could have changed.
The "One minute has passed…" - That usually occurs when SCAR tries to log in the player (enters the username and password), but it takes longer than a minute to connect to the server.
When using multiplayer, if you have the BREAK_TIME constant set to 1, it's not going to make a difference. I have it set up that if there is more than one player, after around an hour, it will switch to the next player instead of just breaking.
You changed it to +/- 1 second, not one minute. I just realized I had it set to +/- 5 seconds instead of 5 minutes (I thought I fixed that a while back, but I guess not), so I've also changed that for the next version.

I hope that answered your questions,
Coh3n

NCDS

2010-02-19 12:18:58

I ran it last night and it worked quite well.


[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      Ran For: 3 Hours, 59 Minutes and 58 Seconds                ]
[                                                                 ]
[     Nick      Loads      Logs      Lvls      Exp.      Brks     ]
[     ¯¯¯¯      ¯¯¯¯¯      ¯¯¯¯      ¯¯¯¯      ¯¯¯¯      ¯¯¯¯     ]
[    ifex   16       432       0      0         0      ]
[    sare   22       616       1      0         2      ]
[                                                                 ]
[=================================================================]
[=================================================================]
Successfully executed

Both accounts got caught in randoms (which is exactly what I wanted to happen ;) ).

One thing, it seems to click trees a second time sometimes after a few seconds of chopping. I looked through the code briefly, but couldn't see a reason why. Just might be something to look into.

Overall, runs good!

twobac

2010-02-19 13:39:09

Hi Coh3n

I also noticed on the proggy that for multi users it does not work out the xp as it does for single players

regarding your reply on the following point.

[php]The "One minute has passed…" - That usually occurs when SCAR tries to log in the player (enters the username and password), but it takes longer than a minute to connect to the server.[/php]

I was watching and it did not enter the username or password for the other players?

Thanks for the info on the timing i had setup the number of logs to chop to just be two loads, so that my 'army' of choppers will go un-noticed as they are there for such a short time. I will have a look at the hour break in the code.

Thank you for a great script. :)

Coh3n

2010-02-19 14:17:31

From: NCDS

Both accounts got caught in randoms (which is exactly what I wanted to happen ;) ).

One thing, it seems to click trees a second time sometimes after a few seconds of chopping. I looked through the code briefly, but couldn't see a reason why. Just might be something to look into.

Overall, runs good!

Thanks, you going to so some random's solving? ;)

And it sometimes clicks twice because of my tree cut down detection method. I have it get the color around the point clicked, and if the character moves, the point moves, and can move away from the tree. I've know about that for a while, I just don't want to mess with something that's working well. :)

EDIT: Oh, NCDS, did the script have any trouble switching players? twobac had an issue where the next player wouldn't login.

From: twobac
Hi Coh3n

I also noticed on the proggy that for multi users it does not work out the xp as it does for single players

regarding your reply on the following point.

[php]The "One minute has passed…" - That usually occurs when SCAR tries to log in the player (enters the username and password), but it takes longer than a minute to connect to the server.[/php]

I was watching and it did not enter the username or password for the other players?

Thanks for the info on the timing i had setup the number of logs to chop to just be two loads, so that my 'army' of choppers will go un-noticed as they are there for such a short time. I will have a look at the hour break in the code.

Thank you for a great script. :)

I was afraid that was the case. Have you tried running it with the new version? Oh, and if you want to switch players every couple loads: Edit line 1513:


if (TimeFromMark(sinceLogin) >= ((60 * 60000) + RandomRange(-300000, 300000))) then

Edit the 60 (make it around 10), then edit the +/- 300000 to something like -120000, 120000. That will switch players every 8-12 minutes.

EDIT: For the exp thing, I fixed that in Rev. 23.

Enjoy,
Coh3n

NCDS

2010-02-19 15:47:27

From: Coh3n
Thanks, you going to so some random's solving? ;)

EDIT: Oh, NCDS, did the script have any trouble switching players? twobac had an issue where the next player wouldn't login.

Hopefully :)

And no, not that I saw anyways. Everything seemed to work just fine!

Coh3n

2010-02-19 15:56:44

From: NCDS
Hopefully :)

And no, not that I saw anyways. Everything seemed to work just fine!

Awesome, thanks. :)

twobac

2010-02-19 16:13:43

Thanks for the help. Nice new version!
[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.22 =============================]
[ ]
[ Ran For: 1 Hours, 54 Minutes and 56 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ 1 2 56 1 0 0 ]
[ 2 0 0 0 0 0 ]
[ 3 0 0 0 0 0 ]
[ 4 0 0 0 0 0 ]
[ 5 0 0 0 0 0 ]
[ 6 0 0 0 0 0 ]
[ 7 0 0 0 0 0 ]
[ 8 0 0 0 0 0 ]
[ 9 0 0 0 0 0 ]
[ 10 0 0 0 0 0 ]
[ 11 0 0 0 0 0 ]
[ 12 0 0 0 0 0 ]
[ 13 0 0 0 0 0 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/PHP]

Ok same issue with multi players, this time i increased the P_TOTAL_LOGS] := 224 (8 loads) from 56.

but player 1 got a random

***** STR: FOUND RANDOM: 'Sandwich Lady' *****
Sandwich Lady: Target: chocolate bar
***** STR: 'Sandwich Lady' RANDOM SOLVING FAILED! *****
Found Random!
Found Random!
NextPlayer
SwitchToPlayer(PlayerNo: 1, Active: False);

no prob, but then all the others did not load.

the script
last debug before i ternimated was this.
SwitchToPlayer(PlayerNo: 12, Active: False);
Player is not Active…
NextPlayer

question is can you explain this line?
SwitchToPlayer(PlayerNo: 12, Active: False);

to me this looks like player 12 is not active?

but
[PHP]with Players[12] do
begin
Name := 'name';
Pass := 'pass';
Nick := 'ame';
Active := True; // here it is set to true??
Pin := '';[/PHP]

Cool got 12 minutes logged now with the Stat help :)

Coh3n

2010-02-19 16:16:31

What you set the P_TOTAL_LOGS to will cut that many logs for that player, then set that player to false because the script has cut as many as you want to do. So it won't ever come back to that player. Change that line I told you to further up on the page if you want to switch players every couple loads.

twobac

2010-02-19 16:27:29

ok i get it, the player total log is for the total duration of the script running, rather than to amount to chop before taking a break. I will reset this back to 1000.

I have amended the other line, but I am not sure why player 2 did not log on after player 1 failed the random?

Coh3n

2010-02-19 16:32:37

From: twobac
ok i get it, the player total log is for the total duration of the script running, rather than to amount to chop before taking a break. I will reset this back to 1000.

I have amended the other line, but I am not sure why player 2 did not log on after player 1 failed the random?

I'm not sure either. Update to Rev. 24, I just made some adjustments. Hopefully it'll work properly now.

twobac

2010-02-19 16:55:01

ok will give it a go :)

ok
[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.24 =============================]
[ ]
[ Ran For: 22 Minutes and 31 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 3 84 0 5670 0 ]
[ wc02 2 55 2 2062 1 ]
[ wc03 0 0 0 0 0 ]
[ wc04 0 0 0 0 0 ]
[ wc05 0 0 0 0 0 ]
[ wc06 0 0 0 0 0 ]
[ wc07 0 0 0 0 0 ]
[ wc08 0 0 0 0 0 ]
[ wc09 0 0 0 0 0 ]
[ wc10 0 0 0 0 0 ]
[ wc11 0 0 0 0 0 ]
[ wc12 0 0 0 0 0 ]
[ wc13 0 0 0 0 0 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

script is still in progress, it looks like it now switches the players :)
will continue to wacht and will post again later.

I have noticed that the banking does seam that real as it opens the screen and empties everything then exits, but does this all so fast. it might look better to have a pause inbetween each.

Awesome!!!!!

EDIT:

new proggy
[PHP]** Warning in Setup_MainLoop: All Players are now inactive, terminating script. **
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.24 =============================]
[ ]
[ Ran For: 9 Hours, 49 Minutes and 59 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 7 196 1 13230 0 ]
[ wc02 11 308 7 20790 1 ]
[ wc03 11 308 4 20790 2 ]
[ wc04 32 896 12 60480 2 ]
[ wc05 6 167 9 6262 1 ]
[ wc06 17 476 10 32130 2 ]
[ wc07 36 1008 0 68040 3 ]
[ wc08 0 0 1 0 1 ]
[ wc09 0 0 1 0 0 ]
[ wc10 1 28 4 1050 0 ]
[ wc11 0 0 0 0 0 ]
[ wc12 3 84 7 3150 0 ]
[ wc13 0 0 0 0 0 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed[/PHP]

Coh3n, I am sorry that a stupid mistake on my part was not using the runscape download client. As soon as I had that the next player works fine. A very basic error. maybe you need to mention that for ppl like me, lol.

:D

grats

2010-02-20 13:22:14

Is it possible to add something like the POMS essence miner, where you can switch characters every certain amount of loads? Thus allowing this to run 24/7 switching characters etc?

NCDS

2010-02-20 13:28:06

From: gratz
Is it possible to add something like the POMS essence miner, where you can switch characters every certain amount of loads? Thus allowing this to run 24/7 switching characters etc?

This already does switch through players allowing it to run until something messes it up ;)

Coh3n

2010-02-20 14:53:13

From: twobac

new proggy
[PHP]** Warning in Setup_MainLoop: All Players are now inactive, terminating script. **
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.24 =============================]
[ ]
[ Ran For: 9 Hours, 49 Minutes and 59 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 7 196 1 13230 0 ]
[ wc02 11 308 7 20790 1 ]
[ wc03 11 308 4 20790 2 ]
[ wc04 32 896 12 60480 2 ]
[ wc05 6 167 9 6262 1 ]
[ wc06 17 476 10 32130 2 ]
[ wc07 36 1008 0 68040 3 ]
[ wc08 0 0 1 0 1 ]
[ wc09 0 0 1 0 0 ]
[ wc10 1 28 4 1050 0 ]
[ wc11 0 0 0 0 0 ]
[ wc12 3 84 7 3150 0 ]
[ wc13 0 0 0 0 0 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed[/PHP]

Coh3n, I am sorry that a stupid mistake on my part was not using the runscape download client. As soon as I had that the next player works fine. A very basic error. maybe you need to mention that for ppl like me, lol.

:D

What do you mean? It should work just fine with any internet browser (Firefox is recommended). Also, what happened with the last six players? Did it just not work?

From: gratz
Is it possible to add something like the POMS essence miner, where you can switch characters every certain amount of loads? Thus allowing this to run 24/7 switching characters etc?

No it's not too late, I can rewirte some stuff for the next version and make it work. :)

From: NCDS
This already does switch through players allowing it to run until something messes it up ;)

Yes, but I think he meant make it so you can define when the switch players. Right now, it automatically switches players/breaks a single player after about an hour.

grats

2010-02-20 15:06:56

From: Coh3n
What do you mean? It should work just fine with any internet browser (Firefox is recommended). Also, what happened with the last six players? Did it just not work?

No it's not too late, I can rewirte some stuff for the next version and make it work. :)

Yes, but I think he meant make it so you can define when the switch players. Right now, it automatically switches players/breaks a single player after about an hour.

Ok, let me know when you need testers for it.. even alpha testing etc

Coh3n

2010-02-20 15:42:42

From: gratz
Ok, let me know when you need testers for it.. even alpha testing etc

Nice, I'll PM it to you within a couple hours. That way you can test it out, and I can get my homework done. :)

<3 you

grats

2010-02-21 04:33:30

From: Coh3n
Nice, I'll PM it to you within a couple hours. That way you can test it out, and I can get my homework done. :)

<3 you

Oh wasn't expecting that fast of a reply I would have stayed on lol, gonna test it now start-er-up and go to sleep

Bonfield

2010-02-21 07:31:12

is there any reason the random detection isnt working at all for me?

i could also test if needed

NCDS

2010-02-21 10:23:50

From: Bonfield
is there any reason the random detection isnt working at all for me?

i could also test if needed

Most likely the InRandom function didn't work. What random was it?

Mrbanana

2010-02-21 10:52:53

Yo, Ok so i was going to put this on for a few hours on my old PC… Problem is its old haha so this detecting randoms really bugs it (froze once had to restart computer) so could you create an option to only scan for randoms every like 10+ seconds?
because it seems to build up the the screen laggs and it keeps trying to detect then eventually break…

Also for the Oak tree chopping could you create a second option to cut JUST the oak on the right of the bank and also the tree next to it.

SORRY i havnt read all the pages so im not sure if any of this has been asked/covered!

(by a few hours i mean like 6-12 hours)

twobac

2010-02-21 11:23:31

[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.24 =============================]
[ ]
[ Ran For: 22 Hours, 28 Minutes and 48 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ WC01 38 1064 6 71820 0 ]
[ WC02 50 1394 9 94095 3 ]
[ WC03 49 1372 9 92610 3 ]
[ WC04 34 952 4 64260 3 ]
[ WC05 15 419 6 15712 2 ]
[ WC06 36 1008 5 68040 1 ]
[ WC07 41 1148 1 77490 2 ]
[ WC08 2 56 4 2100 1 ]
[ WC09 0 0 2 0 0 ]
[ WC10 2 56 4 2100 0 ]
[ WC11 0 0 0 0 0 ]
[ WC12 0 0 0 0 0 ]
[ WC13 0 0 0 0 0 ]
[ ]
[=================================================================]
[=================================================================][/PHP]

What do you mean? It should work just fine with any internet browser (Firefox is recommended). Also, what happened with the last six players? Did it just not work?

The problem with changing players is that SCAR was losing focus on the RS window. the only way the scrip was able to input the next player login details was to click onto SCAR then click back onto the RS window. this applies to all versions of the script. With the downloaded RS client, focus is not lost.

The last 6 players are all low WC lvls and they chop oaks, all get killed by the guards.

Yo, Ok so i was going to put this on for a few hours on my old PC… Problem is its old haha so this detecting randoms really bugs it (froze once had to restart computer) so could you create an option to only scan for randoms every like 10+ seconds?
because it seems to build up the the screen laggs and it keeps trying to detect then eventually break…

Also for the Oak tree chopping could you create a second option to cut JUST the oak on the right of the bank and also the tree next to it.

SORRY i havnt read all the pages so im not sure if any of this has been asked/covered!

(by a few hours i mean like 6-12 hours)

Mr Banana, one rule is to read all the posts as there are lots of important information held in the posts, well at least in the replies to the questions.

I would suggest that you follow the following steps.
1. follow Coh3ns tutorial on setting up Tortoise to correctly setup scar.
2. check out the latest version of the script, current version 24.
3. try to use the RS client
4. follow every line in post 1 of this thread, common error solutions can be found there :)

I would suggest you post the version of SCAR you have, the version of the script and as much info as possible to help solve the problem.

BTW neither of your questions have been asked before. As for the randoms freezing the pc, I do not think this has anything to do with the pc and probalby is a set up issue.

Hope this helps :)

Mrbanana

2010-02-21 12:08:03

From: twobac
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.24 =============================]
[ ]
[ Ran For: 22 Hours, 28 Minutes and 48 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ WC01 38 1064 6 71820 0 ]
[ WC02 50 1394 9 94095 3 ]
[ WC03 49 1372 9 92610 3 ]
[ WC04 34 952 4 64260 3 ]
[ WC05 15 419 6 15712 2 ]
[ WC06 36 1008 5 68040 1 ]
[ WC07 41 1148 1 77490 2 ]
[ WC08 2 56 4 2100 1 ]
[ WC09 0 0 2 0 0 ]
[ WC10 2 56 4 2100 0 ]
[ WC11 0 0 0 0 0 ]
[ WC12 0 0 0 0 0 ]
[ WC13 0 0 0 0 0 ]
[ ]
[=================================================================]
[=================================================================][/PHP]

The problem with changing players is that SCAR was losing focus on the RS window. the only way the scrip was able to input the next player login details was to click onto SCAR then click back onto the RS window. this applies to all versions of the script. With the downloaded RS client, focus is not lost.

The last 6 players are all low WC lvls and they chop oaks, all get killed by the guards.

Mr Banana, one rule is to read all the posts as there are lots of important information held in the posts, well at least in the replies to the questions.

I would suggest that you follow the following steps.
1. follow Coh3ns tutorial on setting up Tortoise to correctly setup scar.
2. check out the latest version of the script, current version 24.
3. try to use the RS client
4. follow every line in post 1 of this thread, common error solutions can be found there :)

I would suggest you post the version of SCAR you have, the version of the script and as much info as possible to help solve the problem.

BTW neither of your questions have been asked before. As for the randoms freezing the pc, I do not think this has anything to do with the pc and probalby is a set up issue.

Hope this helps :)

All 32 Pages? LOL!

It works fine on my Main computer, It is the old computer, the constant scanning for randoms really holds it up(it is this houses…. everything computer many programs being run on it like skype and such.) Everything is up to date, i was using the newest version of the script aswell.

SCAR Divi 3.23 Beta ?

Coh3n

2010-02-21 12:09:23

From: Bonfield
is there any reason the random detection isnt working at all for me?

i could also test if needed

Thanks, but I just committed that version anyway, so you're free to test that one. ;) Check the change log as I changed the setup instructions a little.

From: Mrbanana
Yo, Ok so i was going to put this on for a few hours on my old PC… Problem is its old haha so this detecting randoms really bugs it (froze once had to restart computer) so could you create an option to only scan for randoms every like 10+ seconds?
because it seems to build up the the screen laggs and it keeps trying to detect then eventually break…

Also for the Oak tree chopping could you create a second option to cut JUST the oak on the right of the bank and also the tree next to it.

SORRY i havnt read all the pages so im not sure if any of this has been asked/covered!

(by a few hours i mean like 6-12 hours)

Okay, I'm about to update to revision 25. In that version, I've tweaked the Find_Randoms procedure a little. If you want it to look for randoms less, change the 20 in line 725 to something like 40 or 50. The higher the number, the less it will check for randoms:


temp := Random(20)

For the Oak tree location, sorry, I probably won't be adding that any time soon. I simply don't have the time. If you just want to get your woodcutting to 30, you can use my powerchopper to do so, else use an autofighter to train up their combat.

Also, don't worry about reading all the pages, there are a lot on this thread now. I don't expect everyone to read every post.

From: twobac
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.24 =============================]
[ ]
[ Ran For: 22 Hours, 28 Minutes and 48 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ WC01 38 1064 6 71820 0 ]
[ WC02 50 1394 9 94095 3 ]
[ WC03 49 1372 9 92610 3 ]
[ WC04 34 952 4 64260 3 ]
[ WC05 15 419 6 15712 2 ]
[ WC06 36 1008 5 68040 1 ]
[ WC07 41 1148 1 77490 2 ]
[ WC08 2 56 4 2100 1 ]
[ WC09 0 0 2 0 0 ]
[ WC10 2 56 4 2100 0 ]
[ WC11 0 0 0 0 0 ]
[ WC12 0 0 0 0 0 ]
[ WC13 0 0 0 0 0 ]
[ ]
[=================================================================]
[=================================================================][/PHP]

The problem with changing players is that SCAR was losing focus on the RS window. the only way the scrip was able to input the next player login details was to click onto SCAR then click back onto the RS window. this applies to all versions of the script. With the downloaded RS client, focus is not lost.

The last 6 players are all low WC lvls and they chop oaks, all get killed by the guards.

That's an awesome report! Too bad about the low level accounts. You should use my Powerchopper to get their woodcutting to 30. ;) Maybe you'd get a 44 hour report. :p

How come the accounts cutting willows stopped?

From: Mrbanana
SCAR Divi 3.23 Beta ?

Yes.

Mrbanana

2010-02-21 12:13:54

Haha, i was/am using your powerchopper aswell :P

I get the lagg on the power chopper too, i will try to find this line in it aswell. Thanks!

EDIT: the reason i wanted that oak tree was just so i could level FM later, I understand, Thanks though.

Coh3n

2010-02-21 12:18:33

From: Mrbanana
Haha, i was/am using your powerchopper aswell :P

I get the lagg on the power chopper too, i will try to find this line in it aswell. Thanks!

EDIT: the reason i wanted that oak tree was just so i could level FM later, I understand, Thanks though.

Oh yeah that would be good. I think bionicle has a firemaking script if you need to train firemaking. I'm unaware of what logs it does though.

And for my powerchopper, yeah you'll get a lot of lag probably. I don't update that nearly as much as I do this one because it's FFA. I'll tell you how to change the lag though. Open the Powerchopper, hit Ctrl + F and search for Find_Randoms. Where ever I call the Find_Randoms procedure change it to:


if (Random(50) = 10) then
  Find_Randoms;

Do that for every occurrence of Find_Randoms except the procedure itself.

Mrbanana

2010-02-21 12:21:26

From: Coh3n
Oh yeah that would be good. I think bionicle has a firemaking script if you need to train firemaking. I'm unaware of what logs it does though.

And for my powerchopper, yeah you'll get a lot of lag probably. I don't update that nearly as much as I do this one because it's FFA. I'll tell you how to change the lag though. Open the Powerchopper, hit Ctrl + F and search for Find_Randoms. Where ever I call the Find_Randoms procedure change it to:
if (Random(50) = 10) then
  Find_Randoms;
Do that for every occurrence of Find_Randoms except the procedure itself.

Ok, Thanks will do.

Yeah ive posted some stuff in your Powerchopper thread too…

grats

2010-02-21 15:50:48


[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.24 =============================]
[                                                                 ]
[      Ran For: 2 Hours, 21 Minutes and 31 Seconds                ]
[                                                                 ]
[     Nick      Loads      Logs      Lvls      Exp.      Brks     ]
[     ¯¯¯¯      ¯¯¯¯¯      ¯¯¯¯      ¯¯¯¯      ¯¯¯¯      ¯¯¯¯     ]
[     sail       2         56         1       3780        0       ]
[     rule       4         112        1       7560        0       ]
[     khan       3         84         1       5670        0       ]
[     gaag       6         168        0       11340       0       ]
[     sail       0         0          0       0           0       ]
[                                                                 ]
[=================================================================]

First thing is I like the new debug box it's cleaner and the script seems to go after new trees a lot faster when they are chopped down than it did before.

1 problem is the first time it got 2 loads


  BREAK_AFTER  = 2;    // Loads until break/switch player

it didn't logout it instead started chopping more but in the middle it then logged out and switched players so it wasn't at the bank lol

I am running again with my eye on it full time now, I'll post up more

Coh3n

2010-02-21 16:07:44

From: gratz


[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.24 =============================]
[                                                                 ]
[      Ran For: 2 Hours, 21 Minutes and 31 Seconds                ]
[                                                                 ]
[     Nick      Loads      Logs      Lvls      Exp.      Brks     ]
[     ¯¯¯¯      ¯¯¯¯¯      ¯¯¯¯      ¯¯¯¯      ¯¯¯¯      ¯¯¯¯     ]
[     sail       2         56         1       3780        0       ]
[     rule       4         112        1       7560        0       ]
[     khan       3         84         1       5670        0       ]
[     gaag       6         168        0       11340       0       ]
[     sail       0         0          0       0           0       ]
[                                                                 ]
[=================================================================]

First thing is I like the new debug box it's cleaner and the script seems to go after new trees a lot faster when they are chopped down than it did before.

1 problem is the first time it got 2 loads


  BREAK_AFTER  = 2;    // Loads until break/switch player

it didn't logout it instead started chopping more but in the middle it then logged out and switched players so it wasn't at the bank lol

I am running again with my eye on it full time now, I'll post up more

Update to Rev. 26, it should work properly now.

grats

2010-02-21 16:39:43

From: Coh3n
Update to Rev. 26, it should work properly now.

Yep it's working well now I'm going to let it run 1 cycle of each character I put 20 logs in all 5 of their inventories just to test its logout after 1 load, and so far it went through 2 of them nicely :P

After they're done with that I'm going to set them up for a long period and let them run a while

edit: It's gotten stuck at switching players 3 times in a row now does it wait like 5+ minutes to switch randomly or should it always be instant? I'm running a 3rd time we'll see if it does it again

edit2

Ok it's been running pretty smoothly for awhile, only problems I see is sometimes it just switches users for no reason after it doesn't find a tree.. but it switches users like 2 seconds after it doesn't find a tree randomly, normally it does NOT switch users only happened 4 times today.

Coh3n

2010-02-21 22:22:53

From: gratz
Yep it's working well now I'm going to let it run 1 cycle of each character I put 20 logs in all 5 of their inventories just to test its logout after 1 load, and so far it went through 2 of them nicely :P

After they're done with that I'm going to set them up for a long period and let them run a while

edit: It's gotten stuck at switching players 3 times in a row now does it wait like 5+ minutes to switch randomly or should it always be instant? I'm running a 3rd time we'll see if it does it again

It should always be right away. I have a global variable that increases by 1 every time the current player banks. And when the BREAK_AFTER constant is reached, it breaks/switches players, and resets that variable.

EDIT: I just testing with 5 players and it worked just fine. :confused:

grats

2010-02-22 00:42:26

From: Coh3n
EDIT: I just testing with 5 players and it worked just fine. :confused:

That's not an edit ^.-

lol

well I got it working now see my other edit on my other post it only sometimes randomly logs out I haven't seen a sturdy reason why yet… it hasn't done it for a long time maybe it was having a brain fart?

Coh3n

2010-02-22 00:48:28

From: gratz
That's not an edit ^.-

lol

well I got it working now see my other edit on my other post it only sometimes randomly logs out I haven't seen a sturdy reason why yet… it hasn't done it for a long time maybe it was having a brain fart?

Lmao no it's not. I quoted myself instead of editing. :duh:

Yeah I don't know what happened, I'm glad it's working now though.

EDIT: For the trees thing, I have absolutely no idea why that would happen. :confused:

Juuso

2010-02-22 01:27:10

15 hours 33 minutes
353 loads
getting wc maxed today

ty coh3n

EDIT: By the way, its still running

grats

2010-02-22 03:15:43

From: Coh3n
Lmao no it's not. I quoted myself instead of editing. :duh:

Yeah I don't know what happened, I'm glad it's working now though.

EDIT: For the trees thing, I have absolutely no idea why that would happen. :confused:

It stopped happening… it happened those times then never happened again for the past like 10 hours or something

I'm sure you can find the dummy who logged off a few times ;)

Coh3n

2010-02-22 11:19:21

From: Juuso
15 hours 33 minutes
353 loads
getting wc maxed today

ty coh3n

EDIT: By the way, its still running

Jeeze, is that multiplayer?

From: gratz
It stopped happening… it happened those times then never happened again for the past like 10 hours or something

I'm sure you can find the dummy who logged off a few times ;)

Haha yeah, I still don't get why that would happen. :(

nikos

2010-02-22 12:01:24

i keep getting a flashing screen when i run it on scar and it doesn't do anything since the update. Is anyone else having this issue? maybe uptext is messed up?

Coh3n

2010-02-22 14:49:35

From: nikos
i keep getting a flashing screen when i run it on scar and it doesn't do anything since the update. Is anyone else having this issue? maybe uptext is messed up?

Since the update this morning? If you're getting a flashing screen, you need to disable SMART, and set your graphics to fixed size, and safe mode, then try running it again.

Sabzi

2010-02-22 16:29:37

I have ran it for over an hour and while breaking I either deleted the debug(or scar did or you did) but when I was about to stop the script there was nothing … and then the "stopping script" was forever there(I waited for the proggy) so I just forced it to terminate.
It was working very nicely something happened on my side …
No proggy :((and probably won't as I just tried this)

grats

2010-02-22 16:55:57

From: Coh3n
Since the update this morning? If you're getting a flashing screen, you need to disable SMART, and set your graphics to fixed size, and safe mode, then try running it again.

Yeah flashing screen = not safemode guaranteed, I've seen that plenty-of times

loads:
13
12
12
8
8

keep in mind all the bots have fail bronze axes, I was going to level up their attack and make mithril axes because my main can make them

Coh3n

2010-02-22 20:21:28

From: Sabzi
I have ran it for over an hour and while breaking I either deleted the debug(or scar did or you did) but when I was about to stop the script there was nothing … and then the "stopping script" was forever there(I waited for the proggy) so I just forced it to terminate.
It was working very nicely something happened on my side …
No proggy :((and probably won't as I just tried this)

That's weird, but no problem. :)

From: gratz
Yeah flashing screen = not safemode guaranteed, I've seen that plenty-of times

loads:
13
12
12
8
8

keep in mind all the bots have fail bronze axes, I was going to level up their attack and make mithril axes because my main can make them

Why not use a high level hatchet, and just keep it in your inventory?

Mrbanana

2010-02-22 21:19:52

[==============================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.26 ============================]
[ ]
[………Ran For: 5 Hours, 28 Minutes and 48 Seconds ]
[ ]
[…..Nick ……Loads…….Logs……Lvls……..Exp…….Brks ]
[…..¯¯¯¯ …..¯¯¯¯¯ …. ¯¯¯¯……¯¯¯¯……¯¯¯¯……¯¯¯¯ ]
[…..a**……..27……….756……….0……….51030…..1 ]
[…..o**……..29……….783……….0……….52852…..2 ]
[…..e**……..3………….84……….2……….5670…….1 ]
[…..c**……..6…………168……….4……….11340…..0 ]
[ ]
[===============================================================]
[===============================================================]

Lol! all four where in randoms.

EDIT:how come my proggy doesnt look nice

Coh3n

2010-02-22 21:53:25

From: Mrbanana
[==============================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.26 ============================]
[ ]
[………Ran For: 5 Hours, 28 Minutes and 48 Seconds ]
[ ]
[…..Nick ……Loads…….Logs……Lvls……..Exp…….Brks ]
[…..¯¯¯¯ …..¯¯¯¯¯ …. ¯¯¯¯……¯¯¯¯……¯¯¯¯……¯¯¯¯ ]
[…..a**……..27……….756……….0……….51030…..1 ]
[…..o**……..29……….783……….0……….52852…..2 ]
[…..e**……..3………….84……….2……….5670…….1 ]
[…..c**……..6…………168……….4……….11340…..0 ]
[ ]
[===============================================================]
[===============================================================]

Lol! all four where in randoms.

EDIT:how come my proggy doesnt look nice

Lol well that's unfortunate. :p

It's because you aren't posting it in PHP tags.
[ PHP]
Proggy in there
[/PHP]
Without the space.

grats

2010-02-23 00:08:13

From: Coh3n
That's weird, but no problem. :)

Why not use a high level hatchet, and just keep it in your inventory?

They were leveling xD I am getting them better hatchets tonight

then I'll post new prog etc

question: does the version 26 not allow SMS to active players O_o it wouldn't let me =[ tried like 20 times

wow nvm finally worked ~.~

Mrbanana

2010-02-23 04:32:43

From: gratz
They were leveling xD I am getting them better hatchets tonight

Sounds like a good idea to me!!! Might get Addy though, they like 1-3k each?

Hurray for better proggys with better axes

Frement

2010-02-23 04:35:54

From: Mrbanana
Sounds like a good idea to me!!! Might get Addy though, they like 1-3k each?

Hurray for better proggys with better axes

I can donate axes to everyone, add me to MSN or pm me on irc :) (got like 100 of each, pickaxes too).

grats

2010-02-23 05:16:52

From: Mrbanana
Sounds like a good idea to me!!! Might get Addy though, they like 1-3k each?

Hurray for better proggys with better axes

addy are currently 666 gold market price on the GE lol


[     Nick      Loads      Logs      Lvls      Exp.      Brks     ]
[     ¯¯¯¯      ¯¯¯¯¯      ¯¯¯¯      ¯¯¯¯      ¯¯¯¯      ¯¯¯¯     ]
[     usk2       16        432        4       29160       7       ]
[     rule       12        324        1       21870       7       ]
[     khan       15        405        3       27338       7       ]
[     usk4       10        270        0       18225       6       ]
[     gaag       14        378        1       25515       6

Bonfield

2010-02-23 07:11:44

[php]
***** STR: FOUND RANDOM: 'Sandwich Lady' *****
Sandwich Lady: Target: pie
***** STR: 'Sandwich Lady' RANDOM SOLVING FAILED! *****
-> Setup_MainLoop: All players, terminating…
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.26 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 6 Hours, 22 Minutes and 26 Seconds ]
[ Loads Done: 103 ]
[ Logs Chopped: 2884 ]
[ Levels Gained: 1 ]
[ Exp Gained: 194670 ]
[ Breaks: 6 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/php]

well at least the random detection is working =]

my status says

Logs Chopped: 149968

something could be wrong there lol

Coh3n

2010-02-23 15:30:09

From: gratz
addy are currently 666 gold market price on the GE lol


[     Nick      Loads      Logs      Lvls      Exp.      Brks     ]
[     ¯¯¯¯      ¯¯¯¯¯      ¯¯¯¯      ¯¯¯¯      ¯¯¯¯      ¯¯¯¯     ]
[     usk2       16        432        4       29160       7       ]
[     rule       12        324        1       21870       7       ]
[     khan       15        405        3       27338       7       ]
[     usk4       10        270        0       18225       6       ]
[     gaag       14        378        1       25515       6

That's a good proggy, I'm glad my multiplayer is working well. :)

From: Bonfield
[php]
***** STR: FOUND RANDOM: 'Sandwich Lady' *****
Sandwich Lady: Target: pie
***** STR: 'Sandwich Lady' RANDOM SOLVING FAILED! *****
-> Setup_MainLoop: All players, terminating…
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.26 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 6 Hours, 22 Minutes and 26 Seconds ]
[ Loads Done: 103 ]
[ Logs Chopped: 2884 ]
[ Levels Gained: 1 ]
[ Exp Gained: 194670 ]
[ Breaks: 6 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/php]

well at least the random detection is working =]

my status says
Logs Chopped: 149968
something could be wrong there lol

Haha, yeah I noticed that too. I've fixed that for the next version. I've got a huge update for the next version. ;)

EDIT: Please update to revision 27!

payton

2010-02-23 18:05:50

hmm…went to test rev 27 and svn says i have rev. 27, but the script still says 26. do i not have the newest version or did you forget to change it in the script?

Payton

Bad Boy JH

2010-02-23 18:07:58

jeez coh3n, I don't even get a chance to complain….

Coh3n

2010-02-23 18:09:25

From: payton
hmm…went to test rev 27 and svn says i have rev. 27, but the script still says 26. do i not have the newest version or did you forget to change it in the script?

Payton

It shouldn't. My version of the script says rev. 27. If you have all the player form stuff, then you have rev. 27.

From: Bad Boy JH
jeez coh3n, I don't even get a chance to complain….

Huh?

payton

2010-02-23 19:39:32

had to delete 26 for some reason…form looks nice and the "logs chopped" seems to be fixed. Good job

Payton

Coh3n

2010-02-23 19:41:43

From: payton
had to delete 26 for some reason…form looks nice and the "logs chopped" seems to be fixed. Good job

Payton

Thanks, and I'm glad you got it working. :)

grats

2010-02-23 20:33:31

From: Coh3n
It shouldn't. My version of the script says rev. 27. If you have all the player form stuff, then you have rev. 27.

Huh?

=] Getting this right now just did a random event for 1 of the bots then I'll start up v27

From: Coh3n
That's a good proggy, I'm glad my multiplayer is working well. :)

Yeah sadly I can't get any higher because runescape keeps updating and kicking them off >:(

Coh3n

2010-02-23 21:06:26

From: gratz
=] Getting this right now just did a random event for 1 of the bots then I'll start up v27

Yeah sadly I can't get any higher because runescape keeps updating and kicking them off >:(

That sucks. I can't get very long proggys either because my internet connection is awful and I lose connection a lot. I edited the script a little so that it'll hopefully continue if the connection is lost, but it's still not guaranteed.

grats

2010-02-23 21:29:44

From: Coh3n
That sucks. I can't get very long proggys either because my internet connection is awful and I lose connection a lot. I edited the script a little so that it'll hopefully continue if the connection is lost, but it's still not guaranteed.

Ah I have cable here rarely drops ima do 1 run through with your new GUI setup to test if it does work with what I put in it then if it does work ima run it for a few hours or something :P

is there a character limit? I noticed you added another character setup in the script itself allowing adding 6 instead of 5 now, but in the GUI setup there's no real limit.. is it like the POMS ess now where you can add like 50 characters

Or can you just add character setup for another character in any script and have as many as you want? lolz

anyways it's gone through 2 characters so far looks like it is working good

Coh3n

2010-02-23 22:08:52

From: gratz
Ah I have cable here rarely drops ima do 1 run through with your new GUI setup to test if it does work with what I put in it then if it does work ima run it for a few hours or something :P

is there a character limit? I noticed you added another character setup in the script itself allowing adding 6 instead of 5 now, but in the GUI setup there's no real limit.. is it like the POMS ess now where you can add like 50 characters

Or can you just add character setup for another character in any script and have as many as you want? lolz

anyways it's gone through 2 characters so far looks like it is working good

Well, if you don't use the GUI you can add as many players as you wish. With the GUI, you can have a max of 6 players. This is just how the images are set up and such. Maybe sometime in the future I can make it more, but chances are if you're using more than 6 players, you have a slight idea what you're doing, and in that case, you can just use the DeclarePlayers/constant setup.

Mrbanana

2010-02-23 22:49:35

Hey, Ran last night.
[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.26 =============================]
[ ]
[ Ran For: 9 Hours, 53 Minutes and 17 Seconds ]
[ ]
[ Nick Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ a** 30 840 1 56700 1 ]
[ o** 23 621 1 41918 2 ]
[ e** 15 420 7 28350 1 ]
[ c** 15 420 3 28350 1 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]
Stopped because i got an error.

Found bank symbol! Relocating…
-> Bank_Logs: Failed to find bank screen.
-> Bank_Open: Failed to choose option: Use-quickly
-> Bank_Logs: Failed to open bank, retrying…
Found bank symbol! Relocating…
-> Bank_Logs: Failed to find bank screen.
-> Bank_Open: Failed to choose option: Use-quickly
[Runtime Error] : Exception: Access violation at address 006CE72A in module 'scar.exe'. Read of address FFFFFFFF in line 283 in script C:\Documents and Settings\J**\Desktop\Scar\includes\SRL\SRL\Core\Text.scar

Line 283 in Text.scar

[PHP]
Result := rs_GetUpText;
[/PHP]

Wierd, it was like next to the top left banker, so where 2 other toons, none Chopped the amount set. :'[

EDIT: Ill update your script. and try again tonight.

EDIT: With the proggy, Could you add "Randoms" To tell how many its been through or say like ST or something if its stuck? =o

>=-O the GUI thang is nice!

I can donate axes to everyone, add me to MSN or pm me on irc (got like 100 of each, pickaxes too).

Thx but i would rather keep most of my toons Anon. =-3

grats

2010-02-23 23:30:30

From: Coh3n
Well, if you don't use the GUI you can add as many players as you wish. With the GUI, you can have a max of 6 players. This is just how the images are set up and such. Maybe sometime in the future I can make it more, but chances are if you're using more than 6 players, you have a slight idea what you're doing, and in that case, you can just use the DeclarePlayers/constant setup.

:P


[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.27 =============================]
[                                                                 ]
[     Ran For: 1 Hours, 23 Minutes and 46 Seconds                 ]
[                                                                 ]
[     Nick    T/F    Loads     Logs     Lvls     Exp.     Brks    ]
[     ¯¯¯¯    ¯¯¯    ¯¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯    ]
[     sail     T      6        162       50     10935      3      ]
[     gaag     T      4        108       1      7290       2      ]
[     dusk     T      6        162       1      10935      3      ]
[     khan     T      6        162       1      10935      2      ]
[     rule     F      1        27        0      1822       0      ]
[                                                                 ]
[=================================================================]

so far.. but it's still going
donnno wat happened to rule gonna get him back up O_O

edit: ok well I found something xD

rule is active on SMS so I can't turn him to active in the script without stopping it… is it still supposed to update sms with the activities?

Coh3n

2010-02-23 23:38:42

From: Mrbanana
Line 283 in Text.scar

[PHP]
Result := rs_GetUpText;
[/PHP]

Wierd, it was like next to the top left banker, so where 2 other toons, none Chopped the amount set. :'[

EDIT: Ill update your script. and try again tonight.

EDIT: With the proggy, Could you add "Randoms" To tell how many its been through or say like ST or something if its stuck? =o

>=-O the GUI thang is nice!

Thx but i would rather keep most of my toons Anon. =-3

Your error is because SCAR failed. Lol, that comes up all the time. Has nothing to do with my script.

What do you mean ST?

And thanks, I spent a VERY long time making that form. :p

From: Mrbanana
Line 283 in Text.scar

[PHP]
Result := rs_GetUpText;
[/PHP]

Wierd, it was like next to the top left banker, so where 2 other toons, none Chopped the amount set. :'[

EDIT: Ill update your script. and try again tonight.

EDIT: With the proggy, Could you add "Randoms" To tell how many its been through or say like ST or something if its stuck? =o

>=-O the GUI thang is nice!

Thx but i would rather keep most of my toons Anon. =-3

Your error is because SCAR failed. Lol, that comes up all the time. Has nothing to do with my script.

What do you mean ST?

And thanks, I spent a VERY long time making that form. :p

From: gratz

so far.. but it's still going
donnno wat happened to rule gonna get him back up O_O

edit: ok well I found something xD

rule is active on SMS so I can't turn him to active in the script without stopping it… is it still supposed to update sms with the activities?

I have no idea how the stats system is suppose to work with regards to individual players. That's a question for Neilsie. :p

grats

2010-02-24 00:34:37

From: Coh3n
I have no idea how the stats system is suppose to work with regards to individual players. That's a question for Neilsie. :p

But it was changed with your script update, it used to allow reactivation of choppers through the sms by clicking the check and then pressing update but now it doesn't uncheck if inactive

=[

I'm running 6 more accounts through tutorial with the POMS tutorial guy, do you have anything you need/want me to run with them lol

edit:
Ok so it works nvm the 1 char that stopped just didn't work for some odd reason! but when another got a random SMS worked

[     Ran For: 3 Hours, 30 Minutes and 24 Seconds                 ]
[                                                                 ]
[     Nick    T/F    Loads     Logs     Lvls     Exp.     Brks    ]
[     ¯¯¯¯    ¯¯¯    ¯¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯    ]
[     sail     F      14       378       51     25515      7      ]
[     gaag     F      14       378       1      25515      7      ]
[     dusk     T      15       405       1      27338      7      ]
[     khan     T      16       432       2      29160      8      ]
[     rule     F      1        27        0      1822       0      ]
[                                                                 ]
[=================================================================]

Mrbanana

2010-02-24 01:07:20

i ment ST as like STuck… if it cant do the random, Could be w/e though.

Bad Boy JH

2010-02-24 06:34:00

Mine won't go to the stats page to get the level…its saying my level is 0, its 84, and then it logs out my player…

grats

2010-02-24 07:17:54

From: Bad Boy JH
Mine won't go to the stats page to get the level…its saying my level is 0, its 84, and then it logs out my player…

O_o did you set everything up correctly & are you using the most recent GUI?

Coh3n

2010-02-24 10:16:23

From: gratz
But it was changed with your script update, it used to allow reactivation of choppers through the sms by clicking the check and then pressing update but now it doesn't uncheck if inactive

=[

I'm running 6 more accounts through tutorial with the POMS tutorial guy, do you have anything you need/want me to run with them lol. Not at the moment, other than my powerchopper if you want. :p

edit:
Ok so it works nvm the 1 char that stopped just didn't work for some odd reason! but when another got a random SMS worked Good :)
[     Ran For: 3 Hours, 30 Minutes and 24 Seconds                 ]
[                                                                 ]
[     Nick    T/F    Loads     Logs     Lvls     Exp.     Brks    ]
[     ¯¯¯¯    ¯¯¯    ¯¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯    ]
[     sail     F      14       378       51     25515      7      ]
[     gaag     F      14       378       1      25515      7      ]
[     dusk     T      15       405       1      27338      7      ]
[     khan     T      16       432       2      29160      8      ]
[     rule     F      1        27        0      1822       0      ]
[                                                                 ]
[=================================================================]

From: Mrbanana
i ment ST as like STuck… if it cant do the random, Could be w/e though.

Oh just like a location thing in the progress report saying why the character stopped. It's easily doable, I think I can do that in future updates.

From: Bad Boy JH
Mine won't go to the stats page to get the level…its saying my level is 0, its 84, and then it logs out my player…

It doesn't even click on the stats GameTab?

marpis

2010-02-24 16:52:13

Gotta love that form! :)
That's just ultimate dude!

Coh3n

2010-02-24 16:53:39

From: marpis
Gotta love that form! :)
That's just ultimate dude!

Haha thanks man! :) I'm glad people like it. It looks me way too long for people not to. :p

grats

2010-02-24 17:45:08

From: Coh3n
Haha thanks man! :) I'm glad people like it. It looks me way too long for people not to. :p

It's much better eye candy for the dyslexic than lines of code are, believe me!

edit:
It' seems to be very very stable I've been running for a long while last night scar crashed and I wokeup and started it again lol..

running 6 more characters through your power chopper

Coh3n

2010-02-24 21:12:36

From: gratz
It's much better eye candy for the dyslexic than lines of code are, believe me!

edit:
It' seems to be very very stable I've been running for a long while last night scar crashed and I wokeup and started it again lol..

running 6 more characters through your power chopper

Nice, and congrats on your SRL Tester cup. ;)

pyroryano

2010-02-24 22:20:51

New account… and new proggy.

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.20 =============================]
[ ]
[ You have chosen to cut Oak trees. ]
[ ]
[ Ran For: 8 Hours, 35 Minutes and 48 Seconds ]
[ Loads Done: 210 ]
[ Logs Chopped: 5773 ]
[ Levels Gained: 1 ]
[ Exp Gained: 216488 ]
[ Breaks: 7 ]
[ ]
[=================================================================]
[=================================================================]

Coh3n

2010-02-24 22:45:53

From: pyroryano
New account… and new proggy.

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.20 =============================]
[ ]
[ You have chosen to cut Oak trees. ]
[ ]
[ Ran For: 8 Hours, 35 Minutes and 48 Seconds ]
[ Loads Done: 210 ]
[ Logs Chopped: 5773 ]
[ Levels Gained: 1 ]
[ Exp Gained: 216488 ]
[ Breaks: 7 ]
[ ]
[=================================================================]
[=================================================================]

Nice, that's a really old version. :p

Mrbanana

2010-02-25 00:27:41

LOL REV 20! Update man. =3

[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.27 =============================]
[ ]
[ Ran For: 9 Hours, 24 Minutes and 37 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ c** F 0 0 0 0 0 ]
[ o** F 0 0 0 0 0 ]
[ e** T 26 702 2 47385 0 ]
[ c** F 27 729 6 49208 0 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

MMk so its still running though i think its been in randoms for a few hours, ide wake up in the night and see its in a random LOL and get it out, ALSO in the form, it seems to ditch my first toon and replace it with the last??? I THINK only when i load the player list….. anyone else??

Coh3n

2010-02-25 00:38:48

From: Mrbanana
LOL REV 20! Update man. =3

[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.27 =============================]
[ ]
[ Ran For: 9 Hours, 24 Minutes and 37 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ c** F 0 0 0 0 0 ]
[ o** F 0 0 0 0 0 ]
[ e** T 26 702 2 47385 0 ]
[ c** F 27 729 6 49208 0 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

MMk so its still running though i think its been in randoms for a few hours, ide wake up in the night and see its in a random LOL and get it out, ALSO in the form, it seems to ditch my first toon and replace it with the last??? I THINK only when i load the player list….. anyone else??

Lol, when you say toon, you mean player, right? And I'm not sure what you mean. I've never had issues when loading players.

Mrbanana

2010-02-25 00:46:47

Er yeah… soz old WoW name for characters/players….. KK so ide make the Player list in the new GUI save it, run it and it would run through all my "players", The next time i run it i load the player list saved earlier, press start but it doesnt list my first "Player" in the proggy instead its replaced with the last one…. Also the proggy goes from bottom to top… wth D:

Hang on ill try get some more info on dis

EDIT: spelling

EDIT: Yep, I use 4 players, each time i save a new player list, and load it the first player is replaced with the last

EDIT: i went into DCnB_PlayerList and the first player is there, but not when it is loaded in the GUI?????

grats

2010-02-25 01:09:39

From: Coh3n
Nice, and congrats on your SRL Tester cup. ;)

ty ty !

If I were to run 12 accounts on this what would I do

I create more of the


with players[6] do

etc… the whole block and go to 7 8 9 10 11 ?

then "howmanyplayers = 12"

would it work just like that or do I have to turn the gui part off for it to use declare players?

Coh3n

2010-02-25 01:10:45

From: gratz
ty ty !

If I were to run 12 accounts on this what would I do

I create more of the
with players[6] do
etc… the whole block and go to 7 8 9 10 11 ?

then "howmanyplayers = 12"

would it work just like that or do I have to turn the gui part off for it to use declare players?

Yes that's what you'd do. And theres a constant at the beginning of the script to turn off the GUI.

mysterious123

2010-02-25 03:02:57

Great script.
Progress Report:

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.21 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 7 Hours, 3 Minutes and 20 Seconds ]
[ Loads Done: 97 ]
[ Logs Chopped: 2618 ]
[ Levels Gained: 1 ]
[ Exp Gained: 176715 ]
[ Breaks: 5 ]
[ ]
[=================================================================]
[=================================================================]

grats

2010-02-25 03:04:13

From: mysterious123
Great script.
Progress Report:

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.21 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 7 Hours, 3 Minutes and 20 Seconds ]
[ Loads Done: 97 ]
[ Logs Chopped: 2618 ]
[ Levels Gained: 1 ]
[ Exp Gained: 176715 ]
[ Breaks: 5 ]
[ ]
[=================================================================]
[=================================================================]

I think you're like 6 versions behind lol

mysterious123

2010-02-25 03:45:13

Oh lol!!!
What's the difference though? Does the new version do randoms? Or does it log out as well?

Edit:

I saw the update log… Most of them updates were for Oak, and the fixes never happened to me…
So I'll just update mine when there is something new. Something major.

Alek000

2010-02-25 03:49:56

It's not hard to update his script at all, so what's the point in waiting?

mysterious123

2010-02-25 03:59:22

From: Alek000
It's not hard to update his script at all, so what's the point in waiting?

Cause there isn't much a reason for me to update… I mean, if the script is working great, why insert a risk for it not to work.
Because if it stops working for me after I update it for some reason, I'll waste more time fixing it when it could have been running.
(That's of course a theory)

grats

2010-02-25 05:51:52

From: mysterious123
Cause there isn't much a reason for me to update… I mean, if the script is working great, why insert a risk for it not to work.
Because if it stops working for me after I update it for some reason, I'll waste more time fixing it when it could have been running.
(That's of course a theory)

The new version adds character switching it also is a lot faster at getting logs from what I've watched… it also has a much nicer setup GUI!

The best thing about it though is by far the character swapping you can do lets say 2 loads of logs with 1 guy then switch characters.

edit:


[     Ran For: 2 Hours, 42 Minutes and 40 Seconds                 ]
[                                                                 ]
[     Nick    T/F    Loads     Logs     Lvls     Exp.     Brks    ]
[     ¯¯¯¯    ¯¯¯    ¯¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯    ]
[     fred     T      4        108       2      7290       2      ]
[     greg     T      4        108       3      7290       2      ]
[     jess     T      4        108       3      7290       2      ]
[     bug      T      4        108       3      7290       2      ]
[     bob      F      0        0         0      0          0      ]
[     non      T      4        112       4      7560       2      ]
[     usk4     T      4        108       0      7290       2      ]
[     gaag     T      4        108       0      7290       2      ]
[     rule     T      4        108       0      7290       1      ]
[     usk2     T      2        54        0      3645       1      ]
[     khan     T      2        54        0      3645       1      ]

bob keeps turning off cuz hes stupid so I stopped it to make him smart

Coh3n

2010-02-25 10:58:15

From: gratz
bob keeps turning off cuz hes stupid so I stopped it to make him smart

Lol'd.

grats

2010-02-25 11:00:04

From: Coh3n
Lol'd.

His axe poofed I had to get onto bug who has 30 addy axes and give him another one…

Coh3n

2010-02-25 11:04:11

From: gratz
His axe poofed I had to get onto bug who has 30 addy axes and give him another one…

What? Lol

grats

2010-02-25 11:08:34

From: Coh3n
What? Lol

bug is my bot that holds all the axes for all the other bots cuz I'm 2 lazy to run and sell everything on GE with more than 1 character.. and I think bob dropped his axe

Coh3n

2010-02-25 11:10:21

From: gratz
bug is my bot that holds all the axes for all the other bots cuz I'm 2 lazy to run and sell everything on GE with more than 1 character.. and I think bob dropped his axe

My script dropped his axe? Lol that's not suppose to happen

grats

2010-02-25 11:33:41

From: Coh3n
My script dropped his axe? Lol that's not suppose to happen

LOL I don't know what else could have I power leveled all them to 31 wc with your power chopper & bronze axe… then gave each of them a addy axe in first invin slot and dropped bronze axe, I think it's more likely rs glitched than your script that doesn't know how to drop axes.. dropping an axe…

Coh3n

2010-02-25 11:48:43

From: gratz
LOL I don't know what else could have I power leveled all them to 31 wc with your power chopper & bronze axe… then gave each of them a addy axe in first invin slot and dropped bronze axe, I think it's more likely rs glitched than your script that doesn't know how to drop axes.. dropping an axe…

Lol alright. :p

twobac

2010-02-25 23:10:31

Ok so where do i get the following?

Include file C:\Users\twobac\Desktop\scarprerelease\includes\DCnB_Form.scar does not exist

???

Coh3n

2010-02-25 23:13:23

From: twobac
Ok so where do i get the following?

Include file C:\Users\twobac\Desktop\scarprerelease\includes\DCnB_Form.scar does not exist

???

It should be in your DCnB folder? Update if it's not.

twobac

2010-02-25 23:14:28

lightning fast reply!
sorry update scar?

Coh3n

2010-02-25 23:15:58

From: twobac
lightning fast reply!
sorry update scar?

Lol yeah, I have it email me when someone posts on this thread. :p

And no, update the script.

twobac

2010-02-25 23:17:04

i just did via tortoise to v27? am i missing a step?

twobac

2010-02-25 23:19:01

sorry worked it out
i needed to right click on draynor banker folder rather than on the script file. svn checkout on folder has downloaded more stuff
:)

Edit: Sorry for double post!

Coh3n

2010-02-25 23:20:20

From: twobac
sorry worked it out
i needed to right click on draynor banker folder rather than on the script file. svn checkout on folder has downloaded more stuff
:)

Edit: Sorry for double post!

There you go, and no problem. :p

twobac

2010-02-25 23:29:15

ok hit a problem, when adding players to the form, i cannot add past player 6 as the "+" symbol is off the right side of the form?

Coh3n

2010-02-25 23:30:37

From: twobac
ok hit a problem, when adding players to the form, i cannot add past player 6 as the "+" symbol is off the right side of the form?

Yeah, that's a problem with how I made the form. If you have more than 6 players, you either have to use DeclarePlayers, or only use 6 players. That is something I'd like to add in the future though.

mormonman

2010-02-25 23:32:09

From: Coh3n
Yeah, that's a problem with how I made the form. If you have more than 6 players, you either have to use DeclarePlayers, or only use 6 players. That is something I'd like to add in the future though.

Go check out MasterKill's form tut, he has a great idea for adding a pretty much unlimited amount of accounts :D

Coh3n

2010-02-25 23:34:01

From: mormonman
Go check out MasterKill's form tut, he has a great idea for adding a pretty much unlimited amount of accounts :D

That's where I got all my basic form knowledge. ;) But his method uses a TListBox, and I wanted tabs. :p I just went overboard and made custom EVERYTHING to suit the RS theme.

twobac

2010-02-25 23:35:12

is smart working again?

Coh3n

2010-02-25 23:36:40

From: twobac
is smart working again?

I don't think it ever stopped working. I haven't had a problem with it for months.

twobac

2010-02-25 23:41:31

OK sorry from reading all the pages i thought there was a prob so have not used. had the flickering graphics issue and then nothing would happen.

really like the new form, much nicer than the player form of 2 years ago, maybe in a future version you could add a variable to control the number of players added? sorry you know i have my army :)

Bad Boy JH

2010-02-25 23:43:11

perhaps he was refering to the fact that it was glitching when on the new low detail

twobac

2010-02-25 23:49:36

thats poss.

ok i'm trying to use the declarer players proceedure with my 13 players.
Which includes should i have??
//{.Include srl\srl\Misc\Smart.scar} from version 26 & 27
//{.Include srl\srl.scar} from v 26
//{.Include srl\srl\Misc\Debug.scar} from v26
//{.Include DCnB_Form.scar} from v27 - cannot use at players +6

when i complie error
Line 164: [Error] (164:1): Unknown identifier 'HowManyPlayers' in script

ok answered own question.

if using +6 players and using DeclarePlayers proceedure. do not comment out
{.Include DCnB_Form.scar}

just set USE_FORM = False

:)

mormonman

2010-02-25 23:56:23

From: Coh3n
That's where I got all my basic form knowledge. ;) But his method uses a TListBox, and I wanted tabs. :p I just went overboard and made custom EVERYTHING to suit the RS theme.

I think a TListBox is better than tabs personally.

grats

2010-02-26 00:01:33

I found a problem I think it was at a random at least 4 hours while I was sleeping and never logged out lol.. it just looks for trees

Coh3n

2010-02-26 00:15:08

From: twobac
thats poss.

ok i'm trying to use the declarer players proceedure with my 13 players.
Which includes should i have??
//{.Include srl\srl\Misc\Smart.scar} from version 26 & 27
//{.Include srl\srl.scar} from v 26
//{.Include srl\srl\Misc\Debug.scar} from v26
//{.Include DCnB_Form.scar} from v27 - cannot use at players +6

when i complie error
Line 164: [Error] (164:1): Unknown identifier 'HowManyPlayers' in script

ok answered own question.

if using +6 players and using DeclarePlayers proceedure. do not comment out
{.Include DCnB_Form.scar}

just set USE_FORM = False

:)

All you have to do is set USE_FORM to false and fill out the DeclarePlayers. don't comment ANYTHING out.

From: mormonman
I think a TListBox is better than tabs personally.

I agree, but I was going for an awesome look, and tabs look awesomer. :p

From: gratz
I found a problem I think it was at a random at least 4 hours while I was sleeping and never logged out lol.. it just looks for trees

What`d the debug say?

mormonman

2010-02-26 00:17:48

From: Coh3n
I agree, but I was going for an awesome look, and tabs look awesomer. :p

People and their E-Peen's these days :tongue:

Coh3n

2010-02-26 00:21:37

From: mormonman
People and their E-Peen's these days :tongue:

Lol yes sir. ;)

grats

2010-02-26 01:28:23

From: Coh3n
All you have to do is set USE_FORM to false and fill out the DeclarePlayers. don't comment ANYTHING out.

I agree, but I was going for an awesome look, and tabs look awesomer. :p

What`d the debug say?

It said "looking for uptext" about ten thousand times :rofl:

nikos

2010-02-26 08:20:08

Ive only been able to get small proggies about 2 hours each because it keeps looking to uptext and cannot find it. Most likely because there are no trees left. Maybe it could look for trees longer?

twobac

2010-02-26 08:59:18

[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.27 =============================]
[ ]
[ Ran For: 8 Hours, 2 Minutes and 25 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 T 20 560 2 37800 4 ]
[ wc02 T 20 559 1 37732 4 ]
[ wc03 T 20 560 2 37800 4 ]
[ wc04 T 20 560 2 37800 4 ]
[ wc05 T 5 140 2 9450 1 ]
[ wc06 T 20 560 18 37800 4 ]
[ wc07 T 16 448 1 30240 3 ]
[ ]
[=================================================================]
[=================================================================]
[/php]

player 6 only leveled twice. I like the slower banking proceedure :)

Alek000

2010-02-26 09:29:12

The banking keeps messing up for me, it relocates about 5 or 6 times on average until it opens the bank.

twobac

2010-02-26 09:41:23

I seem to have messed up…

Line 14: [Error] (22423:1): Duplicate identifier 'SRLVersionNumber' in script C:\Users\twobac\Desktop\scarprerelease\includes\SRL\SRL\Core\Globals.scar

I have run the SVN update on ScarPreRelease and it is at revision 80
I have also downloaded the includes via scar?

What do i need to do next?

mastaraymond

2010-02-26 11:13:35

I used your scripts to check the form support in Simba.. This is what I got after some editing :)

Coh3n

2010-02-26 11:20:06

From: gratz
It said "looking for uptext" about ten thousand times :rofl:

I should probably add the logout failsafe back in then. Lol.

From: nikos
Ive only been able to get small proggies about 2 hours each because it keeps looking to uptext and cannot find it. Most likely because there are no trees left. Maybe it could look for trees longer?

It doesn't stop looking for trees, if you're cutting Oaks and both the trees are gone, you'll get a lot of uptext errors, and it won't always find the Oak as soon as it grows back.

From: twobac
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.27 =============================]
[ ]
[ Ran For: 8 Hours, 2 Minutes and 25 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 T 20 560 2 37800 4 ]
[ wc02 T 20 559 1 37732 4 ]
[ wc03 T 20 560 2 37800 4 ]
[ wc04 T 20 560 2 37800 4 ]
[ wc05 T 5 140 2 9450 1 ]
[ wc06 T 20 560 18 37800 4 ]
[ wc07 T 16 448 1 30240 3 ]
[ ]
[=================================================================]
[=================================================================]
[/php]

player 6 only leveled twice. I like the slower banking proceedure :)

Nice! And yeah, I added a small wait in there. ;)

From: Alek000
The banking keeps messing up for me, it relocates about 5 or 6 times on average until it opens the bank.

Every time? I may have to repick my bank colors…

From: twobac
I seem to have messed up…

Line 14: [Error] (22423:1): Duplicate identifier 'SRLVersionNumber' in script C:\Users\twobac\Desktop\scarprerelease\includes\SRL\SRL\Core\Globals.scar

I have run the SVN update on ScarPreRelease and it is at revision 80
I have also downloaded the includes via scar?

What do i need to do next?

You can't download the includes via SCAR as they're way outdated. You need the latest version of the Dev SVN.

From: mastaraymond
I used your scripts to check the form support in Simba.. This is what I got after some editing :)

Wow dude I'm so pumped that it works. I was worried that I'd have done all that work for nothing when I transfer over to Simba. :D

mastaraymond

2010-02-26 11:42:43

From: Coh3n
I should probably add the logout failsafe back in then. Lol.

It doesn't stop looking for trees, if you're cutting Oaks and both the trees are gone, you'll get a lot of uptext errors, and it won't always find the Oak as soon as it grows back.

Nice! And yeah, I added a small wait in there. ;)

Every time? I may have to repick my bank colors…

You can't download the includes via SCAR as they're way outdated. You need the latest version of the Dev SVN.

Wow dude I'm so pumped that it works. I was worried that I'd have done all that work for nothing when I transfer over to Simba. :D

I'm actually surprised my self that it all works :p.

Here is a patch file to make it work with Simba:


Index: DCnB_Form.scar
===================================================================
--- DCnB_Form.scar	(revision 27)
+++ DCnB_Form.scar	(working copy)
@@ -251,7 +251,11 @@
           bmp := frmBitmaps[TAB_ACTIVE];
           GetBitmapSize(bmp, w, h);
           SetBounds({L} 50 + (i * 74), {T} 161, {W} w, {H} h);
+          {$ifdef Simba}
+          DrawBitmap(Bmp,canvas,0,0);
+          {$else}
           SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+          {$endif}
           isActiveTab[i] := True;
 
           if (isActiveImage[IMG_TAB_SCPT_NORM]) then
@@ -325,8 +329,12 @@
       if (not isActiveImage[intArr[0]]) then
         Exit;
       GetBitmapSize(intArr[1], w, h);
+      {$ifdef Simba}
+      DrawBitmap(intarr[1],tImages[intArr[0]].Canvas,0,0);
+      {$else}
       SafeCopyCanvas(GetBitmapCanvas(intArr[1]), tImages[intArr[0]].Canvas,
                      0, 0, w, h, 0, 0, w, h);
+      {$endif}
       isActiveImage[intArr[0]] := False;
     end;
   end;
@@ -368,8 +376,12 @@
   begin
     bmp := intArr[INACTIVE];
     GetBitmapSize(bmp, w, h);
+    {$ifdef Simba}
+    DrawBitmap(bmp,tTabs[currTab].Canvas,0,0);
+    {$else}
     SafeCopyCanvas(GetBitmapCanvas(bmp), tTabs[currTab].Canvas,
                    0, 0, w, h, 0, 0, w, h);
+    {$endif}
     tTabLabels[currTab].Font.Color := 1068418;
     isActiveTab[currTab] := False;
     frm_PlayerInfo(currTab, True);
@@ -382,7 +394,11 @@
   }
   bmp := intArr[ACTIVE];
   GetBitmapSize(bmp, w, h);
+  {$ifdef Simba}
+  DrawBitmap(bmp,tTabs[theSender].Canvas,0,0);
+  {$else}
   SafeCopyCanvas(GetBitmapCanvas(bmp), tTabs[theSender].Canvas, 0, 0, w, h, 0, 0, w, h);
+  {$endif}
   tTabLabels[theSender].Font.Color := 2070783;
   isActiveTab[theSender] := True;
   frm_PlayerInfo(theSender, True);
@@ -476,8 +492,12 @@
 
         bmp := frmBitmaps[TAB_INACTIVE];
         GetBitmapSize(bmp, w, h);
+        {$ifdef Simba}
+        DrawBitmap(bmp,canvas,0,0);
+        {$else}
         SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas,
                        0, 0, w, h, 0, 0, w, h);
+        {$endif}
         isActiveTab[i] := False;
         //frm_Debug('tab_Add', 'Tab ' + IntToStr(i + 1) + ' is now inactive.');
       end;
@@ -520,7 +540,11 @@
         frm_PlayerInfo(hi - 1, False);
         bmp := frmBitmaps[TAB_ACTIVE];
         GetBitmapSize(bmp, w, h);
+        {$ifdef Simba}
+        DrawBitmap(bmp,canvas,0,0);
+        {$else}
         SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+        {$endif}
         tTabLabels[hi - 1].Font.Color := 2070783;
         isActiveTab[hi - 1] := True;
         //frm_Debug('tab_Delete', 'Tab ' + IntToStr(hi - 1) + ' is now active.');
@@ -875,8 +899,12 @@
         for i := 0 to hi do
         begin
           GetBitmapSize(bmpArr[i], w, h);
+          {$ifdef Simba}
+          DrawBitmap(bmpArr[i],tImages[imgArr[i]].Canvas,0,0);
+          {$else}
           SafeCopyCanvas(GetBitmapCanvas(bmpArr[i]), tImages[imgArr[i]].Canvas,
                      0, 0, w, h, 0, 0, w, h);
+          {$endif}
         end;
 
         hi := High(tTabs);
@@ -1008,8 +1036,12 @@
 
           bmp := frmBitmaps[bmpArr[i]];
           GetBitmapSize(bmp, w, h);
+          {$ifdef Simba}
+          DrawBitmap(bmp,tImages[imgArr[i]].Canvas,0,0);
+          {$else}
           SafeCopyCanvas(GetBitmapCanvas(bmp), tImages[imgArr[i]].Canvas,
                          0, 0, w, h, 0, 0, w, h);
+          {$endif}
           isActiveImage[imgArr[i]] := False;
         end;
 
@@ -1051,8 +1083,12 @@
         if (not isActiveImage[intArr[0]]) then
           Exit;
         GetBitmapSize(intArr[1], w, h);
+        {$ifdef Simba}
+        DrawBitmap(intArr[1],tImages[intArr[0]].Canvas,0,0);
+        {$else}
         SafeCopyCanvas(GetBitmapCanvas(intArr[1]), tImages[intArr[0]].Canvas,
                        0, 0, w, h, 0, 0, w, h);
+        {$endif}
         isActiveImage[intArr[0]] := False;
       end;
 
@@ -1099,8 +1135,12 @@
         if (isActiveImage[intArr[0]]) then
           Exit;
         GetBitmapSize(intArr[1], w, h);
+        {$ifdef Simba}
+        DrawBitmap(intArr[1],tImages[intArr[0]].Canvas,0,0);
+        {$else}
         SafeCopyCanvas(GetBitmapCanvas(intArr[1]), tImages[intArr[0]].Canvas,
                        0, 0, w, h, 0, 0, w, h);
+        {$endif}
         isActiveImage[intArr[0]] := True;
       end;
 
@@ -1133,11 +1173,16 @@
 
           bmp := frmBitmaps[bmpArr[i]];
           GetBitmapSize(bmp, w, h);
+          {$ifdef Simba}
+          DrawBitmap(bmp,tImages[imgArr[i]].Canvas,0,0);
+          {$else}
           SafeCopyCanvas(GetBitmapCanvas(bmp), tImages[imgArr[i]].Canvas,
                          0, 0, w, h, 0, 0, w, h);
-
+          {$endif}
           if (Sender = tImages[IMG_TAB_LABELS]) then
+          begin
             isActiveImage[imgArr[i]] := False;
+          end;
         end;
 
         isActiveImage[imgArr[2]] := True;
@@ -1196,7 +1241,7 @@
   with frmMain do
   begin
     SetBounds({L} 100, {T} 100, {W} 555, {H} 433);
-    BorderStyle := nsNone;
+    BorderStyle := bsNone;
   end;
 
   useSmart := TCheckBox.Create(frmMain);
@@ -1398,7 +1443,11 @@
       end;
 
       GetBitmapSize(bmp, w, h);
+      {$ifdef Simba}
+      DrawBitmap(bmp,Canvas,0,0);
+      {$else}
       SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+      {$endif}
     end;
   end;
 
@@ -1551,7 +1600,11 @@
       isActiveImage[helpImage] := False;
       OnMouseMove := @frm_OnMouseMove;
       GetBitmapSize(bmp, w, h);
+      {$ifdef Simba}
+      DrawBitmap(bmp,Canvas,0,0);
+      {$else}
       SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+      {$endif}
     end;
   end;
   {
@@ -1599,7 +1652,11 @@
       isActiveImage[introImage] := False;
       OnMouseMove := @frm_OnMouseMove;
       GetBitmapSize(bmp, w, h);
+      {$ifdef Simba}
+      DrawBitmap(bmp,Canvas,0,0);
+      {$else}
       SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+      {$endif}
     end;
   end;
 
@@ -1621,7 +1678,11 @@
     isActiveImage[IMG_FRM_CREDITS] := False;
     OnMouseMove := @frm_OnMouseMove;
     GetBitmapSize(bmp, w, h);
+    {$ifdef Simba}
+    DrawBitmap(bmp,Canvas,0,0);
+    {$else}
     SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+    {$endif}
   end;
   {
     Everything to do with the intro form (frmIntro) ends here, and everything
@@ -1772,4 +1833,4 @@
 begin
   frm_SafeInitForm;
   frm_SafeShowFormModal;
-end;
\ No newline at end of file
+end;

E: You might want to put the "// <– Remove the '{' to use multiple players!" text outside the { } brackets, since somehow I cannot disable Simba from using nested comments :(.

Coh3n

2010-02-26 12:05:28

From: mastaraymond
I'm actually surprised my self that it all works :p.

Here is a patch file to make it work with Simba:


Index: DCnB_Form.scar
===================================================================
--- DCnB_Form.scar	(revision 27)
+++ DCnB_Form.scar	(working copy)
@@ -251,7 +251,11 @@
           bmp := frmBitmaps[TAB_ACTIVE];
           GetBitmapSize(bmp, w, h);
           SetBounds({L} 50 + (i * 74), {T} 161, {W} w, {H} h);
+          {$ifdef Simba}
+          DrawBitmap(Bmp,canvas,0,0);
+          {$else}
           SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+          {$endif}
           isActiveTab[i] := True;
 
           if (isActiveImage[IMG_TAB_SCPT_NORM]) then
@@ -325,8 +329,12 @@
       if (not isActiveImage[intArr[0]]) then
         Exit;
       GetBitmapSize(intArr[1], w, h);
+      {$ifdef Simba}
+      DrawBitmap(intarr[1],tImages[intArr[0]].Canvas,0,0);
+      {$else}
       SafeCopyCanvas(GetBitmapCanvas(intArr[1]), tImages[intArr[0]].Canvas,
                      0, 0, w, h, 0, 0, w, h);
+      {$endif}
       isActiveImage[intArr[0]] := False;
     end;
   end;
@@ -368,8 +376,12 @@
   begin
     bmp := intArr[INACTIVE];
     GetBitmapSize(bmp, w, h);
+    {$ifdef Simba}
+    DrawBitmap(bmp,tTabs[currTab].Canvas,0,0);
+    {$else}
     SafeCopyCanvas(GetBitmapCanvas(bmp), tTabs[currTab].Canvas,
                    0, 0, w, h, 0, 0, w, h);
+    {$endif}
     tTabLabels[currTab].Font.Color := 1068418;
     isActiveTab[currTab] := False;
     frm_PlayerInfo(currTab, True);
@@ -382,7 +394,11 @@
   }
   bmp := intArr[ACTIVE];
   GetBitmapSize(bmp, w, h);
+  {$ifdef Simba}
+  DrawBitmap(bmp,tTabs[theSender].Canvas,0,0);
+  {$else}
   SafeCopyCanvas(GetBitmapCanvas(bmp), tTabs[theSender].Canvas, 0, 0, w, h, 0, 0, w, h);
+  {$endif}
   tTabLabels[theSender].Font.Color := 2070783;
   isActiveTab[theSender] := True;
   frm_PlayerInfo(theSender, True);
@@ -476,8 +492,12 @@
 
         bmp := frmBitmaps[TAB_INACTIVE];
         GetBitmapSize(bmp, w, h);
+        {$ifdef Simba}
+        DrawBitmap(bmp,canvas,0,0);
+        {$else}
         SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas,
                        0, 0, w, h, 0, 0, w, h);
+        {$endif}
         isActiveTab[i] := False;
         //frm_Debug('tab_Add', 'Tab ' + IntToStr(i + 1) + ' is now inactive.');
       end;
@@ -520,7 +540,11 @@
         frm_PlayerInfo(hi - 1, False);
         bmp := frmBitmaps[TAB_ACTIVE];
         GetBitmapSize(bmp, w, h);
+        {$ifdef Simba}
+        DrawBitmap(bmp,canvas,0,0);
+        {$else}
         SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+        {$endif}
         tTabLabels[hi - 1].Font.Color := 2070783;
         isActiveTab[hi - 1] := True;
         //frm_Debug('tab_Delete', 'Tab ' + IntToStr(hi - 1) + ' is now active.');
@@ -875,8 +899,12 @@
         for i := 0 to hi do
         begin
           GetBitmapSize(bmpArr[i], w, h);
+          {$ifdef Simba}
+          DrawBitmap(bmpArr[i],tImages[imgArr[i]].Canvas,0,0);
+          {$else}
           SafeCopyCanvas(GetBitmapCanvas(bmpArr[i]), tImages[imgArr[i]].Canvas,
                      0, 0, w, h, 0, 0, w, h);
+          {$endif}
         end;
 
         hi := High(tTabs);
@@ -1008,8 +1036,12 @@
 
           bmp := frmBitmaps[bmpArr[i]];
           GetBitmapSize(bmp, w, h);
+          {$ifdef Simba}
+          DrawBitmap(bmp,tImages[imgArr[i]].Canvas,0,0);
+          {$else}
           SafeCopyCanvas(GetBitmapCanvas(bmp), tImages[imgArr[i]].Canvas,
                          0, 0, w, h, 0, 0, w, h);
+          {$endif}
           isActiveImage[imgArr[i]] := False;
         end;
 
@@ -1051,8 +1083,12 @@
         if (not isActiveImage[intArr[0]]) then
           Exit;
         GetBitmapSize(intArr[1], w, h);
+        {$ifdef Simba}
+        DrawBitmap(intArr[1],tImages[intArr[0]].Canvas,0,0);
+        {$else}
         SafeCopyCanvas(GetBitmapCanvas(intArr[1]), tImages[intArr[0]].Canvas,
                        0, 0, w, h, 0, 0, w, h);
+        {$endif}
         isActiveImage[intArr[0]] := False;
       end;
 
@@ -1099,8 +1135,12 @@
         if (isActiveImage[intArr[0]]) then
           Exit;
         GetBitmapSize(intArr[1], w, h);
+        {$ifdef Simba}
+        DrawBitmap(intArr[1],tImages[intArr[0]].Canvas,0,0);
+        {$else}
         SafeCopyCanvas(GetBitmapCanvas(intArr[1]), tImages[intArr[0]].Canvas,
                        0, 0, w, h, 0, 0, w, h);
+        {$endif}
         isActiveImage[intArr[0]] := True;
       end;
 
@@ -1133,11 +1173,16 @@
 
           bmp := frmBitmaps[bmpArr[i]];
           GetBitmapSize(bmp, w, h);
+          {$ifdef Simba}
+          DrawBitmap(bmp,tImages[imgArr[i]].Canvas,0,0);
+          {$else}
           SafeCopyCanvas(GetBitmapCanvas(bmp), tImages[imgArr[i]].Canvas,
                          0, 0, w, h, 0, 0, w, h);
-
+          {$endif}
           if (Sender = tImages[IMG_TAB_LABELS]) then
+          begin
             isActiveImage[imgArr[i]] := False;
+          end;
         end;
 
         isActiveImage[imgArr[2]] := True;
@@ -1196,7 +1241,7 @@
   with frmMain do
   begin
     SetBounds({L} 100, {T} 100, {W} 555, {H} 433);
-    BorderStyle := nsNone;
+    BorderStyle := bsNone;
   end;
 
   useSmart := TCheckBox.Create(frmMain);
@@ -1398,7 +1443,11 @@
       end;
 
       GetBitmapSize(bmp, w, h);
+      {$ifdef Simba}
+      DrawBitmap(bmp,Canvas,0,0);
+      {$else}
       SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+      {$endif}
     end;
   end;
 
@@ -1551,7 +1600,11 @@
       isActiveImage[helpImage] := False;
       OnMouseMove := @frm_OnMouseMove;
       GetBitmapSize(bmp, w, h);
+      {$ifdef Simba}
+      DrawBitmap(bmp,Canvas,0,0);
+      {$else}
       SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+      {$endif}
     end;
   end;
   {
@@ -1599,7 +1652,11 @@
       isActiveImage[introImage] := False;
       OnMouseMove := @frm_OnMouseMove;
       GetBitmapSize(bmp, w, h);
+      {$ifdef Simba}
+      DrawBitmap(bmp,Canvas,0,0);
+      {$else}
       SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+      {$endif}
     end;
   end;
 
@@ -1621,7 +1678,11 @@
     isActiveImage[IMG_FRM_CREDITS] := False;
     OnMouseMove := @frm_OnMouseMove;
     GetBitmapSize(bmp, w, h);
+    {$ifdef Simba}
+    DrawBitmap(bmp,Canvas,0,0);
+    {$else}
     SafeCopyCanvas(GetBitmapCanvas(bmp), Canvas, 0, 0, w, h, 0, 0, w, h);
+    {$endif}
   end;
   {
     Everything to do with the intro form (frmIntro) ends here, and everything
@@ -1772,4 +1833,4 @@
 begin
   frm_SafeInitForm;
   frm_SafeShowFormModal;
-end;
\ No newline at end of file
+end;

E: You might want to put the "// <– Remove the '{' to use multiple players!" text outside the { } brackets, since somehow I cannot disable Simba from using nested comments :(.

Thanks! :) I've never used a patch file like that, is there a way to like automatically import it so it changes everything, rather than having to go through and change each part?

Mrbanana

2010-02-26 12:11:42

MMK remember what i was saying about the GUI? still happening D:

Load a playerlist and click on the first player in the list, notice its been replaced with the last one? D-=< but if you dont click it it wont replace it… wth?

mastaraymond

2010-02-26 13:29:32

From: Coh3n
Thanks! :) I've never used a patch file like that, is there a way to like automatically import it so it changes everything, rather than having to go through and change each part?

Yes there is :-). Create a file "SimbaPatch.patch" in the same dir as the form file, dump the contents of my post in there. Right click the patch file -> tortoiseSVN -> apply patch -> Select the form file in that lil popup -> press save

Frement

2010-02-26 13:32:44

From: mastaraymond
Yes there is :-). Create a file "SimbaPatch.patch" in the same dir as the form file, dump the contents of my post in there. Right click the patch file -> tortoiseSVN -> apply patch -> Select the form file in that lil popup -> press save

Is there an easy way to create such patch file?

mastaraymond

2010-02-26 13:43:25

From: Frement
Is there an easy way to create such patch file?

Yes. Edit a file that is in your SVN repos, then right click the file -> TortoiseSVN -> Create Patch

Coh3n

2010-02-26 13:58:03

From: Mrbanana
MMK remember what i was saying about the GUI? still happening D:

Load a playerlist and click on the first player in the list, notice its been replaced with the last one? D-=< but if you dont click it it wont replace it… wth?

Hmm okay, I'll look into that right now.

From: mastaraymond
Yes there is :-). Create a file "SimbaPatch.patch" in the same dir as the form file, dump the contents of my post in there. Right click the patch file -> tortoiseSVN -> apply patch -> Select the form file in that lil popup -> press save

Alrighty then, thanks! :)

From: mastaraymond
Yes. Edit a file that is in your SVN repos, then right click the file -> TortoiseSVN -> Create Patch

You can also open Notepad, and save the file as a .patch.

EDIT: Please update to revision 28!

twobac

2010-02-26 21:02:17

Hi Coh3n,

Sorry, can you point the right way here?

You need the latest version of the Dev SVN

Thanks

Frement

2010-02-26 21:05:10

From: twobac
Hi Coh3n,

Sorry, can you point the right way here?

Thanks

http://villavu.com/forum/showthread.php?t=47714

Coh3n's tutorial is good. I installed everything with it.

twobac

2010-02-26 21:28:05

From: twobac
I seem to have messed up…

Line 14: [Error] (22423:1): Duplicate identifier 'SRLVersionNumber' in script C:\Users\twobac\Desktop\scarprerelease\includes\SRL\SRL\Core\Globals.scar

I have run the SVN update on ScarPreRelease and it is at revision 80
I have also downloaded the includes via scar?

What do i need to do next?

I have updated Dev SVN, as per the installation tutorial, and I am at revision 394. I have copied the files to the plugin directory, but I am still getting the Duplicate indenifier

Coh3n

2010-02-26 22:41:50

From: twobac
I have updated Dev SVN, as per the installation tutorial, and I am at revision 394. I have copied the files to the plugin directory, but I am still getting the Duplicate indenifier

When the script comes up with the SRL Version or whatever. Delete it and try again.

spart300

2010-02-27 10:36:42

I searched this thread but found nothing about the problem I seem to be having.. I try to start the script and I get this:

Line 270: [Error] (15594:1): Invalid number of parameters in script C:\Users\*\Desktop\scarprerelease\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

Mrbanana

2010-02-27 11:41:15

From: spart300
I searched this thread but found nothing about the problem I seem to be having.. I try to start the script and I get this:

Line 270: [Error] (15594:1): Invalid number of parameters in script C:\Users\*\Desktop\scarprerelease\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

I am pritty sure this has nothing to do with the script, try updating SRL, or everything…

grats

2010-02-27 18:35:03

From: Mrbanana
I am pritty sure this has nothing to do with the script, try updating SRL, or everything…

Yep you're right it isn't this script :P

@Coh3n I'd add back a failsafe for it to logout maybe like 3 minutes after not seeing a tree then login to next character because it keeps characters in randoms for hours lol

spart300

2010-02-27 19:28:58

Ok..So after tinkering with all that fun stuff I got it to work..But now lol.. When I use SMART when the page loads it starts to blink uncontrollablly thus making the script not type in my user and pass. Any help?

EDIT: fixed :)

grats

2010-02-27 19:39:53

From: spart300
Ok..So after tinkering with all that fun stuff I got it to work..But now lol.. When I use SMART when the page loads it starts to blink uncontrollablly thus making the script not type in my user and pass. Any help?

Turn your settings to safe mode in smart… and please use the "edit" feature on this forum

spart300

2010-02-27 19:49:45

Well..not exactly.. idid some searching around and it seems to be called "flickering". And the only way I fixed it was by keeping the setting "high" on the player from but turning the RS login screen settings on "Safe Mode". So I figured it out. Thanks though. Proggie soon.

Edit: I do know the feature of the edit button but I figured I'd make 2 posts so people wouldn't get confused these days. And as soon as you said that I figured it out lol.. So I guess I should delete this post.

twobac

2010-02-27 20:17:53

From: Coh3n
When the script comes up with the SRL Version or whatever. Delete it and try again.

Hi Coh3n,

Just to check, do i delete row14 in Globals.scar? or the whole file??

Cheers

Edit: Disregard the above!!!!

I have just uninstalled and reinstalled SCAR and the includes and thought better redownload the script to ensure all was well. In SVN the checkout told me I was at version 28, but in the script is shows 27 still. lol. But the main thing I noticed was that the script now only uses two includes.
[php]program DraynorChopNBank;
{.Include srl\srl\Misc\Smart.scar} //Add '//' to the beginning of the line to disable SMART
{.Include DCnB_Form.scar}
[/php]

In my script I still had
[php]{.Include srl\srl.scar}
{.Include srl\srl\Misc\Debug.scar}
[/php]

and as these are now called from DCnB_Form.scar, that is why I had the duplicate identifier error.

:D

spart300

2010-02-28 09:13:43

[============================ Rev.28 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 5 Hours, 37 Minutes and 16 Seconds ]
[ Loads Done: 52 ]
[ Logs Chopped: 1455 ]
[ Levels Gained: 9 ]
[ Exp Gained: 98212 ]
[ Breaks: 2 ]
[ ]
[=================================================================]
[=================================================================]

I stopped it manually because I had to upgrade to another axe. Great script :) hopefully i'll have a 15hr+ one coming along.:spongebob:

twobac

2010-02-28 12:23:50

First ever SMART proggy!! :)

[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.28 =============================]
[ ]
[ Ran For: 9 Hours, 10 Minutes and 40 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 F 21 588 1 39690 3 ]
[ wc02 F 43 1204 61 81270 6 ]
[ wc03 F 8 224 1 15120 1 ]
[ wc04 F 8 224 1 15120 1 ]
[ wc05 F 13 364 4 24570 1 ]
[ wc06 F 16 448 1 30240 2 ]
[ wc07 F 14 392 0 26460 2 ]
[ ]
[=================================================================]
[=================================================================]
[/php]

WC03 - Failed random at 4 hours 34 minutes
[php]***** STR: FOUND RANDOM: 'Molly's Evil Twin' *****
***** STR: 'Molly's Evil Twin' RANDOM SOLVING FAILED! *****
[/php]
WC04 - Failed random at 4 hours 44 minutes
[php]***** STR: FOUND RANDOM: 'Prison Pete' *****
***** STR: 'Prison Pete' RANDOM SOLVING FAILED! *****
[/php]
WC05 - completed 13 loads, but then logged out before attempting 7th load of cycle? No random in the debug.
WC03 - logged back in at 7 hours 13 mins - if player failed a random, the active flag should be set to false,
rather than letting the player log back in and then fail on finding either WC lvl at -1 or failed to find uptext.
The debug then shows
[php]Current Woodcutting level: -1
-> Setup_Player: You need at least 30 in Woodcutting to cut Willow trees
[/php]
- due to the random
WC04 - logged in after
[php]-> Chop_Tree: Failed to find uptext
-> Chop_Trees: Failed to find uptext 60 times, logging out…
[/php]
WC05 - same as WC04 - assuming failed a random that was not caught in the debug.
WC06 - completes 2 loads get same as WC04
WC07 - same
WC01 - stuck in bank
WC02 - log's in completes 7 loads, logged out then back in straight away. I would suggest that now there
is only one player active, that the breaks should kick back in.
WC02 - failed random at 9hours 10 minutes
[php]***** STR: FOUND RANDOM: 'Freaky Forester' *****
Forester: We should talk to the freaky forester.
Forester: Can't find the Forester.
***** STR: 'Freaky Forester' RANDOM SOLVING FAILED! *****
-> Next_Player: All players inactive, terminating script…
[/php]

Any ideas why the script stats & sig is not working?

spart300

2010-02-28 14:43:57

Perhaps an update in progress? Either with the script or with SRL?

payton

2010-02-28 16:10:27

Are the signatures down or is it just me?

twobac

2010-02-28 18:20:26

No the sig's are down at the moment. They have been down for at least 2/3 days.

But SMS site is still recording :)
http://scriptmanager.freehostia.com/index.php

Frement

2010-02-28 19:27:22

And nobody has notified me! :O I'll get to it tomorrow. Thought I dont know a reason why they would just stop working.

spart300

2010-02-28 20:50:32

[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.28 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 5 Hours, 26 Minutes and 9 Seconds ]
[ Loads Done: 80 ]
[ Logs Chopped: 2240 ]
[ Levels Gained: 6 ]
[ Exp Gained: 151200 ]
[ Breaks: 0 ]
[ ]

Ok so it worked great again. However it isn't recognizing randoms now :/ So I've gotten a few randoms Scaperune and so on. So idk why it won't recognize. Other than that a freat script. But I do recomend breaks and lots of em or you will get more randoms. I found that out first hand today lol. Great job man keep it up.

grats

2010-02-28 21:03:17

From: spart300
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.28 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 5 Hours, 26 Minutes and 9 Seconds ]
[ Loads Done: 80 ]
[ Logs Chopped: 2240 ]
[ Levels Gained: 6 ]
[ Exp Gained: 151200 ]
[ Breaks: 0 ]
[ ]

Ok so it worked great again. However it isn't recognizing randoms now :/ So I've gotten a few randoms Scaperune and so on. So idk why it won't recognize. Other than that a freat script. But I do recomend breaks and lots of em or you will get more randoms. I found that out first hand today lol. Great job man keep it up.

Yes this is what I posted out he took out a piece inorder to stop logging him out when lag occurred but now it keeps you in randoms lol, he'll probably change it back and make a wait longer

Bonfield

2010-03-01 01:34:27

[php]-> Chop_Trees: Failed to find trees 60 times, logging out…
-> Next_Player: All players inactive, terminating script…
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.27 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 8 Hours, 21 Minutes and 5 Seconds ]
[ Loads Done: 141 ]
[ Logs Chopped: 3948 ]
[ Levels Gained: 1 ]
[ Exp Gained: 266490 ]
[ Breaks: 7 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/php]

logged in at was in the mime random, while walking back to the bank, other than random dection its a great script

spart300

2010-03-01 08:55:08

Yeah cause I remember the first time I used it he did the random no problem. Now all of the sudden he can't do a single random lol. I hope he fixes it cause I trully find it amazing when I see these Macros do randoms.

twobac

2010-03-01 12:06:37

From: Frement
And nobody has notified me! :O I'll get to it tomorrow. Thought I dont know a reason why they would just stop working.

Sorry for not contacting you, I thought it was a prob at my end!

Thanks for fixing :)

Frement

2010-03-01 14:39:31

From: twobac
Sorry for not contacting you, I thought it was a prob at my end!

Thanks for fixing :)

Well yeah…about the fixing :D I didnt have time to touch it! :) Well good that it works again, maybe freehostia banned the IP for too many connections? (Thinking it as ddos attack?) I have no idea why it happened.

spart300

2010-03-01 16:29:20

Is anyone else having problems with their players not noticing random events?

Coh3n

2010-03-01 16:39:00

Hey guys,

Sorry, I've been away the last couple days. Couldn't check this thread or anything. Now that I'm back, I'll hopefully be able to make a good update soon. Maybe fix the random detection issue? :D Anyway, here are my responses for everyone.

From: gratz
Yep you're right it isn't this script :P

@Coh3n I'd add back a failsafe for it to logout maybe like 3 minutes after not seeing a tree then login to next character because it keeps characters in randoms for hours lol

Revision 28 is suppose to logout if it can't find the uptext 60 times or if it can't find the trees 60 times. I'll have to look into it when I get time.

From: twobac
Hi Coh3n,

Just to check, do i delete row14 in Globals.scar? or the whole file??

Cheers

Edit: Disregard the above!!!!

I have just uninstalled and reinstalled SCAR and the includes and thought better redownload the script to ensure all was well. In SVN the checkout told me I was at version 28, but in the script is shows 27 still. lol. But the main thing I noticed was that the script now only uses two includes.
[php]program DraynorChopNBank;
{.Include srl\srl\Misc\Smart.scar} //Add '//' to the beginning of the line to disable SMART
{.Include DCnB_Form.scar}
[/php]

In my script I still had
[php]{.Include srl\srl.scar}
{.Include srl\srl\Misc\Debug.scar}
[/php]

and as these are now called from DCnB_Form.scar, that is why I had the duplicate identifier error.

:D

Okay, I'm glad you got it figured out! Also, it shouldn't say Rev.27 in the script…

From: spart300
[============================ Rev.28 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 5 Hours, 37 Minutes and 16 Seconds ]
[ Loads Done: 52 ]
[ Logs Chopped: 1455 ]
[ Levels Gained: 9 ]
[ Exp Gained: 98212 ]
[ Breaks: 2 ]
[ ]
[=================================================================]
[=================================================================]

I stopped it manually because I had to upgrade to another axe. Great script :) hopefully i'll have a 15hr+ one coming along.:spongebob:

Very nice. It's not often you get a report like that without getting a random. :)

From: twobac
First ever SMART proggy!! :)

[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.28 =============================]
[ ]
[ Ran For: 9 Hours, 10 Minutes and 40 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 F 21 588 1 39690 3 ]
[ wc02 F 43 1204 61 81270 6 ]
[ wc03 F 8 224 1 15120 1 ]
[ wc04 F 8 224 1 15120 1 ]
[ wc05 F 13 364 4 24570 1 ]
[ wc06 F 16 448 1 30240 2 ]
[ wc07 F 14 392 0 26460 2 ]
[ ]
[=================================================================]
[=================================================================]
[/php]

WC03 - Failed random at 4 hours 34 minutes
[php]***** STR: FOUND RANDOM: 'Molly's Evil Twin' *****
***** STR: 'Molly's Evil Twin' RANDOM SOLVING FAILED! *****
[/php]
WC04 - Failed random at 4 hours 44 minutes
[php]***** STR: FOUND RANDOM: 'Prison Pete' *****
***** STR: 'Prison Pete' RANDOM SOLVING FAILED! *****
[/php]
WC05 - completed 13 loads, but then logged out before attempting 7th load of cycle? No random in the debug.
WC03 - logged back in at 7 hours 13 mins - if player failed a random, the active flag should be set to false,
rather than letting the player log back in and then fail on finding either WC lvl at -1 or failed to find uptext.
The debug then shows
[php]Current Woodcutting level: -1
-> Setup_Player: You need at least 30 in Woodcutting to cut Willow trees
[/php]
- due to the random
WC04 - logged in after
[php]-> Chop_Tree: Failed to find uptext
-> Chop_Trees: Failed to find uptext 60 times, logging out…
[/php]
WC05 - same as WC04 - assuming failed a random that was not caught in the debug.
WC06 - completes 2 loads get same as WC04
WC07 - same
WC01 - stuck in bank
WC02 - log's in completes 7 loads, logged out then back in straight away. I would suggest that now there
is only one player active, that the breaks should kick back in.
WC02 - failed random at 9hours 10 minutes
[php]***** STR: FOUND RANDOM: 'Freaky Forester' *****
Forester: We should talk to the freaky forester.
Forester: Can't find the Forester.
***** STR: 'Freaky Forester' RANDOM SOLVING FAILED! *****
-> Next_Player: All players inactive, terminating script…
[/php]

Any ideas why the script stats & sig is not working?

Great feedback! When a random is failed, SRL is suppose to automatically set the current player the false, and logout. Not exactly sure what happened there. Sometimes if you don't know why a player logged out, it could be due to a connection problem. If you lose connection, and it doesn't kick back in before it doesn't find trees/uptext 60 times, then it will set that player to false.

From: spart300
Perhaps an update in progress? Either with the script or with SRL?

I've been away the last couple days, sorry. Hopefully today or tomorrow I can take a good look at everyone's feedback and make an update.

From: spart300
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.28 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 5 Hours, 26 Minutes and 9 Seconds ]
[ Loads Done: 80 ]
[ Logs Chopped: 2240 ]
[ Levels Gained: 6 ]
[ Exp Gained: 151200 ]
[ Breaks: 0 ]
[ ]

Ok so it worked great again. However it isn't recognizing randoms now :/ So I've gotten a few randoms Scaperune and so on. So idk why it won't recognize. Other than that a freat script. But I do recomend breaks and lots of em or you will get more randoms. I found that out first hand today lol. Great job man keep it up.

Nice report. The in randoms detection in SRL may be broken for some randoms, it's hard to say. Also, you can take breaks. You determine how many loads you want to do before breaking/switching players.

From: Bonfield
[php]-> Chop_Trees: Failed to find trees 60 times, logging out…
-> Next_Player: All players inactive, terminating script…
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.27 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 8 Hours, 21 Minutes and 5 Seconds ]
[ Loads Done: 141 ]
[ Logs Chopped: 3948 ]
[ Levels Gained: 1 ]
[ Exp Gained: 266490 ]
[ Breaks: 7 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/php]

logged in at was in the mime random, while walking back to the bank, other than random dection its a great script

Thanks, and the random detection seems to be the biggest issue. I'll try to work on it. If anyone has any accounts in randoms that failed, I'd love to make the in randoms functions work again. :)

From: spart300
Yeah cause I remember the first time I used it he did the random no problem. Now all of the sudden he can't do a single random lol. I hope he fixes it cause I trully find it amazing when I see these Macros do randoms.

That's because I made it randomly check for randoms because apparently some people were experiencing a massive amount of lag when the script searched. It seems like that isn't working that well, so I'll have to change it for the next version.

From: spart300
Is anyone else having problems with their players not noticing random events?

Read this post.

spart300

2010-03-01 16:55:23

Lol I just had a chance now to read it, Thanks for getting back to me I noticed I can be quite bothering some times. And wit hthe breaks I was refferring to people using this script to use them to reduce the amount of randoms they get lol. I hope to see an update soon. There are only a number of really small things that make the char seem a little odd but this has got to be my favorite script since Frostbite's and Shuttle's Script.

Coh3n

2010-03-01 17:07:39

From: spart300
Lol I just had a chance now to read it, Thanks for getting back to me I noticed I can be quite bothering some times. And wit hthe breaks I was refferring to people using this script to use them to reduce the amount of randoms they get lol. I hope to see an update soon. There are only a number of really small things that make the char seem a little odd but this has got to be my favorite script since Frostbite's and Shuttle's Script.

What makes the character seem odd?

And I just made an update to the randoms finding. Hopefully it works better.

spart300

2010-03-01 19:33:11

O ok I'll have to stop the script and update it :) Well sometimes when he walks to the Willow trees, He will sit there for a little bit and not do anything. Also he will make ecentric movements from time to time while waiting for Willows. Also character has tendencies to walking into the same spot over and over. No idea why. Other than the walking around from Willow tree to tree he seems quite human. I've had no players bother me.

twobac

2010-03-01 20:36:31

Hi Coh3n,

If anyone has any accounts in randoms that failed, I'd love to make the in randoms functions work again.

just tried ver 29. I have one char, stuck with Molly. but the script just logged out.
[]Current Woodcutting level: -1
-> Setup_Player: You need at least 30 in Woodcutting to cut Willow trees
NextPlayer
[/]
Are you working on an 'in random' fix? should I leave the char there until i can test the fix? or just get him out??

:)

Coh3n

2010-03-01 21:14:17

From: spart300
O ok I'll have to stop the script and update it :) Well sometimes when he walks to the Willow trees, He will sit there for a little bit and not do anything. Also he will make ecentric movements from time to time while waiting for Willows. Also character has tendencies to walking into the same spot over and over. No idea why. Other than the walking around from Willow tree to tree he seems quite human. I've had no players bother me.

Do you mean it clicks the same spot on the MM when walking from the bank to the trees? Also, sometimes it'll click another tree if it's already chopping. That's simply because my method that detects if the tree is cut down isn't perfect, and sometimes may return a false positive.

From: twobac
Hi Coh3n,

just tried ver 29. I have one char, stuck with Molly. but the script just logged out.
[]Current Woodcutting level: -1
-> Setup_Player: You need at least 30 in Woodcutting to cut Willow trees
NextPlayer
[/]
Are you working on an 'in random' fix? should I leave the char there until i can test the fix? or just get him out??

:)

Well since that happen, I have to assume that it didn't detect that it was in that random. I'd need the account info. to test out the in random detection for the Molly random.

twobac

2010-03-01 23:17:25

I have found the following glitch.
[php]SwitchToPlayer(PlayerNo: 2, Active: True);
Player2
Current Woodcutting level: 58
Found hatchet!
-> Chop_Trees: Failed to find tree
NextPlayer
SwitchToPlayer(PlayerNo: 3, Active: True);
Current Woodcutting level: 58
[/php]
Notice it does not show the name of player3??? well, player 2 is still logged in chopping, but progress is now reported against player3 who is not logged in.

second glitch
[php][ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 F 0 0 0 0 0 ]
[ wc02 T 5 140 0 9450 0 ]
[ wc03 T 0 0 0 0 0 ]
[/php]
See wc02 details, he now logs out wc03 logs in and does a load
[php][ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 F 0 0 0 0 0 ]
[ wc02 T 5 140 64 9450 1 ]
[ wc03 T 1 28 0 1890 0 ]
[/php]
So you can see that wc02 has just gained 64 levels!

Coh3n

From: mysterious123
[============================ Rev.21 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 4 Hours, 1 Minutes and 59 Seconds ]
[ Loads Done: 81 ]
[ Logs Chopped: 2186 ]
[ Levels Gained: 1 ]
[ Exp Gained: 147555 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]

Could have been longer, though it was fishy I didn't get even one random in one account going for 4 hrs straight. :D

And yes, I know my revision is outdated!

Lol, don't worry about that, if it works well for you, why switch, right? :)

mysterious123

2010-03-02 15:08:24

From: Coh3n
Lol, don't worry about that, if it works well for you, why switch, right? :)

Yup =D
If only you made a yew cutter :rolleyes:

Coh3n

2010-03-02 15:10:12

From: mysterious123
Yup =D
If only you made a yew cutter :rolleyes:

Lol, I've had a few people ask me if I was going to. However, there are things that I know which allow me to say this - I don't need to ;)

mysterious123

2010-03-02 15:14:47

From: Coh3n
Lol, I've had a few people ask me if I was going to. However, there are things that I know which allow me to say this - I don't need to ;)

Sorry for going a bit off topic but – thanks for hinting - if it was meant to be a hint :P

I'll be waiting…

In other news: I'll keep posting proggies and reporting bugs if I find.

Coh3n

2010-03-02 15:18:50

From: mysterious123
Sorry for going a bit off topic but – thanks for hinting - if it was meant to be a hint :P

I'll be waiting…

In other news: I'll keep posting proggies and reporting bugs if I find.

It indeed was a hint. ;) And thanks.

spart300

2010-03-02 15:56:19

:) yeah same here thanks for clearing that up :p I'm actually in the middle of runing it, it's running great no problems at all .The usual uptext errors but it doesn't seem to mess anything up at all. I'm really hoping to get a random so I can record it for you so perhaps you could see for yourself if anything happens. All of the sudden I'm not getting any randoms today :(. I think they gave up on trying to bust me cause I did all 20 of their randoms the past 2 days manually lol.

Coh3n

2010-03-02 15:58:07

From: spart300
:) yeah same here thanks for clearing that up :p I'm actually in the middle of runing it, it's running great no problems at all .The usual uptext errors but it doesn't seem to mess anything up at all. I'm really hoping to get a random so I can record it for you so perhaps you could see for yourself if anything happens. All of the sudden I'm not getting any randoms today :(. I think they gave up on trying to bust me cause I did all 20 of their randoms the past 2 days manually lol.

Yeah lol, the more randoms you solve, the less likely you are to get them in the future. They added that feature some months ago.

spart300

2010-03-02 16:04:48

Yeah I've been an avid gamer for 5 years. I love the old RS but gotta get with the program lol.. But hey man I really appreciate you updating this script and listening to us. I remember when the older scripts were out they stopped updating themand they had HUGE potential. So I appreciate what you're doing for us all.

Edit:Oh shit..Quiz random and he hasn't noticed that it's happened to him yet :o

Edit2: it must be the detection from the random finder..not your script..Damn gotta hate randoms sometimes. I wonder what makes it so hard to detect them..

Edit3: I waited a few minutes and still never found it, I wasn't even getting uptext errors like I was before so it wasn't even looking lol.. Oh well I did it manually.

Coh3n

2010-03-02 22:52:27

From: spart300
Yeah I've been an avid gamer for 5 years. I love the old RS but gotta get with the program lol.. But hey man I really appreciate you updating this script and listening to us. I remember when the older scripts were out they stopped updating themand they had HUGE potential. So I appreciate what you're doing for us all.

Edit:Oh shit..Quiz random and he hasn't noticed that it's happened to him yet :o

Edit2: it must be the detection from the random finder..not your script..Damn gotta hate randoms sometimes. I wonder what makes it so hard to detect them..

Edit3: I waited a few minutes and still never found it, I wasn't even getting uptext errors like I was before so it wasn't even looking lol.. Oh well I did it manually.

Damn, I wonder why nothing is getting detected. I wonder if I'm doing something wrong in the script.

grats

2010-03-03 10:05:50

From: Coh3n
Damn, I wonder why nothing is getting detected. I wonder if I'm doing something wrong in the script.

It's logging out when it gets randoms fine on my part

Coh3n

2010-03-03 11:48:09

From: gratz
It's logging out when it gets randoms fine on my part

Alright, it could have just been that one time then. I don't know.

spart300

2010-03-03 14:31:37

It's so weird though because Ithe first time I used this script it detected the pirate random and did it fine. And then all of the sudden when other randoms would come it would constantly bring up uptext errors and no random found. I know nothing of scripting to be honest. I've tried it a few times and it was just..too much lol. The only suggestion I have is that maybe it's something with the dtection of 1st time randoms? I don't know how it detects the random.. I know that when you get a first time random a box appears in the chat box that llets you know you unlocked a new song. Could that be a contributing factor or does it have nothing to do with the detection method?

Coh3n

2010-03-03 14:41:26

From: spart300
It's so weird though because Ithe first time I used this script it detected the pirate random and did it fine. And then all of the sudden when other randoms would come it would constantly bring up uptext errors and no random found. I know nothing of scripting to be honest. I've tried it a few times and it was just..too much lol. The only suggestion I have is that maybe it's something with the dtection of 1st time randoms? I don't know how it detects the random.. I know that when you get a first time random a box appears in the chat box that llets you know you unlocked a new song. Could that be a contributing factor or does it have nothing to do with the detection method?

Well updates are made to RS all the time that we don't know about. Some can be as simple as color changes, which mess our scripts up. So the detection of you pirate random may have worked before, but could now be broken. I don't really have any control over that.

spart300

2010-03-03 14:48:48

Yes of course you don't. But if you don't mind me asking, how does your detection method work?

EDIT: Because if it tries to find the color of a specific whatever it would be more prone to messing up..And that when I follow the red dot on the SMART screen it doesn't even seem to notice that it's nowhere near draynor village lol. I would think (just saying here) that looking for the person instead of the color when getting a few uptext errors that maybe it would realize its in a random. But I'm not the scripter and I know nothing about scripting as far as runescape. I only know simple things.. So i'm not trying to say anything mean or likewise.

EDIT2: btw I'm sorry that I havent used srl stats..My firewall can be very annoying at times and afeter days at a time messing with it I finally got it work so I apologize for not being able to contribute to the SRL stats..

Coh3n

2010-03-03 14:52:47

From: spart300
Yes of course you don't. But if you don't mind me asking, how does your detection method work?

It's not my detection method, it's SRL's. It's built into the SRL include. And, I don't know for sure how it works, but I think when FindNormalRandoms is called, it searches to see if it's in any of the randoms, which uses individual in randoms functions (i.e. function arnav_InRandom: Boolean;).

spart300

2010-03-03 14:55:44

Ah ok. That does make sense.. Well today I'm going to letit run in a random instead of pausing it after 2 minutes andabout 20uptext errors and see what it will do. I'll be sure to post right away what happens.

Edit: Nevermind not running it because RS doesn't work lol.. Oh no, Brand new RS update, Effects the Login page and also they came out with their monthly accounts banned

Coh3n

2010-03-03 15:27:46

From: spart300
Ah ok. That does make sense.. Well today I'm going to letit run in a random instead of pausing it after 2 minutes andabout 20uptext errors and see what it will do. I'll be sure to post right away what happens.

Edit: Nevermind not running it because RS doesn't work lol.. Oh no, Brand new RS update, Effects the Login page and also they came out with their monthly accounts banned

Yeah wow, lots of updates today. :eek:

spart300

2010-03-03 15:48:48

Looks like alot of scripts are going to be outdated for a while. I'm sure this script won;t be able to get past the new login page?

mysterious123

2010-03-03 17:09:16

I tried removing Smart, so it wouldn't have to go through the new login, but it seems that it keeps clicking in loops on the setup in-game.

If that could be fixed, we could continue running this script.

twobac

2010-03-03 17:30:35

A big shame about the RS update :(

Update caused script to stop
[php]Error Connecting.
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.31 =============================]
[ ]
[ Ran For: 16 Hours, 54 Minutes and 22 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 F 18 504 1 34020 9 ]
[ wc02 F 17 476 1 32130 8 ]
[ wc03 T 15 419 17 28282 7 ]
[ wc04 T 19 532 2 35910 9 ]
[ wc05 T 20 559 2 37732 10 ]
[ wc06 T 19 532 1 35910 9 ]
[ wc07 T 20 559 11 37732 10 ]
[ wc08 T 18 503 5 33952 9 ]
[ wc09 T 14 392 3 26460 7 ]
[ wc10 F 16 448 5 30240 8 ]
[ wc11 F 9 252 6 17010 4 ]
[ wc12 F 16 448 8 30240 8 ]
[ wc13 F 16 448 4 30240 8 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/php]

Random Reports - Found but Failed :( (time stamp during script run time)
[PHP]***** STR: FOUND RANDOM: 'Mime' *****//@16h22m
***** STR: 'Mime' RANDOM SOLVING FAILED! *****[/PHP]
[php]***** STR: FOUND RANDOM: 'Freaky Forester' *****//@5h02m
Forester: We should talk to the freaky forester.
Forester: Kill The 4 Tailed Pheasant.
Forester: Killed Pheasant.
Forester: Leaving Forester.
Forester: Leaving Forester.
Forester: Failed to exit the forester
***** STR: 'Freaky Forester' RANDOM SOLVING FAILED! ****[/php]

Random Reports - Found but SOLVED :D (time stamp during script run time)
[php]***** STR: FOUND RANDOM: 'Drill Demon' *****//@10h01m
We should talk to Damien.
Demon random solved!
***** STR: 'Drill Demon' RANDOM SOLVED SUCCESSFULLY! *****[/php]
[php]
***** STR: FOUND RANDOM: 'Frog' ***** //@8h32m
Princess not found!
Princess not found!
Trying to click a frog…
***** STR: 'Frog' RANDOM SOLVED SUCCESSFULLY! *****[/php]
[php]***** STR: FOUND RANDOM: 'Freaky Forester' ***** //@6h36m
Forester: We should talk to the freaky forester.
Forester: Kill The 4 Tailed Pheasant.
Forester: Killed Pheasant.
Forester: Leaving Forester.
Forester: Forester random solved.
***** STR: 'Freaky Forester' RANDOM SOLVED SUCCESSFULLY! *****[/php]

Player Active = False
WC01 - same as wc11 & 12
WC02 - same as wc11 & 12
WC04 - Mime Random failed, but this did not set active to false?
WC10 - Cage Random - missed by SRL - @ 15h39 mins this player activates whilst in bank
WC11 - @ 15h39 mins this player activates whilst in bank - debug report.
[php]-> Chop_Trees: Failed to find trees 60 times, logging out…
NextPlayer
SwitchToPlayer(PlayerNo: 11, Active: False);
WC12
-> Chop_Trees: Failed to find tree
-> Chop_Trees: Failed to find trees 60 times, logging out…
[/php]
WC12 - see above debug - now normally when new players logs in you get the following
[php]SwitchToPlayer(PlayerNo: 6, Active: True);
WC06
Current Woodcutting level: 73[/php]
WC13 - same as wc11 & 12

Player WC lvls reported vs actual
[php]
reported actual
wc01 1 1
wc02 1 1
wc03 17 1
wc04 2 1
wc05 2 2
wc06 1 5
wc07 11 0
wc08 5 6
wc09 3 3
wc10 5 7
wc11 6 10
wc12 8 10
wc13 4 6[/php]

Would be nice to have a total line that showed

[php]Loads Logs Lvls Exp. Brks
217 6072 66 409858 106[/php]

spart300

2010-03-03 20:02:04

Yeah looks like all scripts are not going to work until someone figures out how to get past the new login feature. may take a day or two lol.

xSaintias

2010-03-03 23:07:07

i maybe wrong, but i thought they just fixed login….
im not sure however.

Coh3n

2010-03-03 23:20:50

From: mysterious123
I tried removing Smart, so it wouldn't have to go through the new login, but it seems that it keeps clicking in loops on the setup in-game.

If that could be fixed, we could continue running this script.

I've been gone all day, but I know people were working on fixing it as soon as possible. Keep trying to update your SRL every hour or so. It'll be fixed before you know it. ;)

@twobac: WOW, awesome feedback, yet again! :) I have put all my comments in red.

From: twobac
A big shame about the RS update :(

Update caused script to stop
[php]Error Connecting.
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.31 =============================]
[ ]
[ Ran For: 16 Hours, 54 Minutes and 22 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 F 18 504 1 34020 9 ]
[ wc02 F 17 476 1 32130 8 ]
[ wc03 T 15 419 17 28282 7 ]
[ wc04 T 19 532 2 35910 9 ]
[ wc05 T 20 559 2 37732 10 ]
[ wc06 T 19 532 1 35910 9 ]
[ wc07 T 20 559 11 37732 10 ]
[ wc08 T 18 503 5 33952 9 ]
[ wc09 T 14 392 3 26460 7 ]
[ wc10 F 16 448 5 30240 8 ]
[ wc11 F 9 252 6 17010 4 ]
[ wc12 F 16 448 8 30240 8 ]
[ wc13 F 16 448 4 30240 8 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/php]
Very nice report, too bad about the update. :(

Random Reports - Found but Failed :( (time stamp during script run time)
[PHP]***** STR: FOUND RANDOM: 'Mime' *****//@16h22m
***** STR: 'Mime' RANDOM SOLVING FAILED! *****[/PHP]
[php]***** STR: FOUND RANDOM: 'Freaky Forester' *****//@5h02m
Forester: We should talk to the freaky forester.
Forester: Kill The 4 Tailed Pheasant.
Forester: Killed Pheasant.
Forester: Leaving Forester.
Forester: Leaving Forester.
Forester: Failed to exit the forester
***** STR: 'Freaky Forester' RANDOM SOLVING FAILED! ****[/php]

Random Reports - Found but SOLVED :D (time stamp during script run time)
[php]***** STR: FOUND RANDOM: 'Drill Demon' *****//@10h01m
We should talk to Damien.
Demon random solved!
***** STR: 'Drill Demon' RANDOM SOLVED SUCCESSFULLY! *****[/php]
[php]
***** STR: FOUND RANDOM: 'Frog' ***** //@8h32m
Princess not found!
Princess not found!
Trying to click a frog…
***** STR: 'Frog' RANDOM SOLVED SUCCESSFULLY! *****[/php]
[php]***** STR: FOUND RANDOM: 'Freaky Forester' ***** //@6h36m
Forester: We should talk to the freaky forester.
Forester: Kill The 4 Tailed Pheasant.
Forester: Killed Pheasant.
Forester: Leaving Forester.
Forester: Forester random solved.
***** STR: 'Freaky Forester' RANDOM SOLVED SUCCESSFULLY! *****[/php]
I'm very glad to see that the script is detecting when the player is in a random. Too bad all the solvers don't work.

Player Active = False
WC01 - same as wc11 & 12
WC02 - same as wc11 & 12
WC04 - Mime Random failed, but this did not set active to false? I have no idea what would cause this. Possibly lag, an SRL bug, who knows. It's not a reoccurring bug is it?
WC10 - Cage Random - missed by SRL - @ 15h39 mins this player activates whilst in bank Do you mean it got the random while in the bank?
WC11 - @ 15h39 mins this player activates whilst in bank - debug report.
[php]-> Chop_Trees: Failed to find trees 60 times, logging out…
NextPlayer
SwitchToPlayer(PlayerNo: 11, Active: False);
WC12
-> Chop_Trees: Failed to find tree
-> Chop_Trees: Failed to find trees 60 times, logging out…
[/php]
Was this player in a random, or it just logged in, and was in the bank? If the latter, I'm not sure why it would look for the trees before walking to the bank.
WC12 - see above debug - now normally when new players logs in you get the following
[php]SwitchToPlayer(PlayerNo: 6, Active: True);
WC06
Current Woodcutting level: 73[/php]
WC13 - same as wc11 & 12

Player WC lvls reported vs actual
[php]
reported actual
wc01 1 1
wc02 1 1
wc03 17 1
wc04 2 1
wc05 2 2
wc06 1 5
wc07 11 0
wc08 5 6
wc09 3 3
wc10 5 7
wc11 6 10
wc12 8 10
wc13 4 6[/php]
So it said that there were 17 levels gained, when actually only 1 was? I can see how a gained level would be missed, but why there is extra, I'm not sure. I have an idea that may be able to fix this.

Would be nice to have a total line that showed

[php]Loads Logs Lvls Exp. Brks
217 6072 66 409858 106[/php]
I like this idea. I'll add this for the next big update.

From: xSaintias
i maybe wrong, but i thought they just fixed login….
im not sure however.

Well then awesome! I haven't looked myself, but I'm going to now.

EDIT: Didn't work for me, the script just started and sat there doing nothing.

spart300

2010-03-04 19:52:50

Yeah same here Coh3n the script didnt budge. And i updated my SRL. Still nothing

Coh3n

2010-03-04 23:13:34

From: spart300
Yeah same here Coh3n the script didnt budge. And i updated my SRL. Still nothing

If you replace the Login.scar file in your SRL core folder with the one I've attached, it should work. The one I've attached has the fixed Login functions (thanks to Blumblebee), and the fixed Logout function (fixed by me). These will work as a temporary fix until either they, or other versions get committed.

Cheers,
Coh3n

twobac

2010-03-04 23:13:51

Coh3n,

answers
Q1
[php]WC04 - Mime Random failed, but this did not set active to false? I have no idea what would cause this. Possibly lag, an SRL bug, who knows. It's not a reoccurring bug is it?
[/php]
A1 - I use a satalite internet connection, so i do get a lot of lag and i'm on narrowband lol.
Q2
[php]WC10 - Cage Random - missed by SRL - @ 15h39 mins this player activates whilst in bank Do you mean it got the random while in the bank?
[/php]
A2 - Yes got whilst in bank

Q3[php]Was this player in a random, or it just logged in, and was in the bank? If the latter, I'm not sure why it would look for the trees before walking to the bank.
[/php]

A3 - yes in bank

Q4[php]So it said that there were 17 levels gained, when actually only 1 was? I can see how a gained level would be missed, but why there is extra, I'm not sure. I have an idea that may be able to fix this.
[/php]

A4 - I had the same before, showed 64 lvl gained, where it was only 1 or 2.

Q from me, why is'nt ur power chopper accessed via SVN?

:)

edit: thanks for login!

Coh3n

2010-03-04 23:19:09

@twobac: Thanks for the answers. I think the randoms that occurrred in the bank may have been missed because I didn't have the script search for randoms before and after banking, and a little in between. :p Also, apparently my levels gained calculations is really flawed. :duh:

And, no problem. ;) Hopefully it works for you.

EDIT: Oh, and about the Powerchopper - It's not downloaded via SVN because I don't update nearly as much as I do this script, mainly because it was for FFA only. However, since the Jr. Member scripts are now accessible to everyone, I may just combine both scripts and have the option to power chop or bank.

twobac

2010-03-04 23:45:37

Now that is a great option!, also means only one script to maintain lol

top part of running prog, switched between 2 players no prob! Congrats to Bumblebee & you for making those changes :)
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 9 Minutes and 19 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[/php]

Coh3n

2010-03-04 23:47:20

From: twobac
Now that is a great option!, also means only one script to maintain lol

top part of running prog, switched between 2 players no prob! Congrats to Bumblebee & you for making those changes :)
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 9 Minutes and 19 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[/php]

Sweet, so it's working well so far?

EDIT: Yeah, it's a good option, but it also means I may have to reconstruct a lot of the form to incorporate the new options, which may or may not be a pain.

fieri3xjohn

2010-03-05 03:47:26

This is what happened now….
Failed when compiling
Line 270: [Error] (15618:1): Invalid number of parameters in script C:\Users\Johnny\Documents\scarprerelease\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar
Should i post the script here?

Dgby714

2010-03-05 03:48:58

From: fieri3xjohn
This is what happened now….
Failed when compiling
Line 270: [Error] (15618:1): Invalid number of parameters in script C:\Users\Johnny\Documents\scarprerelease\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar
Should i post the script here?

Is your SRL uptodate?

fieri3xjohn

2010-03-05 03:52:45

yes, I updated and tried again
and it said the same thing

Dgby714

2010-03-05 03:57:22

From: fieri3xjohn
yes, I updated and tried again
and it said the same thing

Are you using opendev?

fieri3xjohn

2010-03-05 03:58:12

It works
but can't get past login screen

Dgby714

2010-03-05 04:02:09

From: fieri3xjohn
Whats opendev

V- Look -V (Taken from first post >.>)

From: Coh3n

For this script to work, you need the latest version of SCAR (3.23), and the SRL open-dev repository. If you don't know how to get these, visit this tutorial.

fieri3xjohn

2010-03-05 04:06:36

Yeh, can get to the login screen, but after that it starts flashing and script doesnt go further… Has anyone got past that yet?

Dgby714

2010-03-05 04:08:54

From: fieri3xjohn
Yeh, can get to the login screen, but after that it starts flashing and script doesnt go further… Has anyone got past that yet?

Runescape needs to be set to Safe Mode =)

fieri3xjohn

2010-03-05 04:18:41

Thanks Dgby714, Script working and running :)

mysterious123

2010-03-05 07:12:41

You might find this weird and unbelievable, but Jagex isn't random with its randoms.

I keep getting the same proggies, yes the proggies are working, the script is working. Whatever is stopping the script is of course a random. And a random keeps showing after that amount of logs… Always. Keeps being 1296 logs.
I'll show you next proggy… Very weird.

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.21 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 2 Hours, 32 Minutes and 40 Seconds ]
[ Loads Done: 48 ]
[ Logs Chopped: 1296 ]
[ Levels Gained: 0 ]
[ Exp Gained: 87480 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]

Coh3n

2010-03-05 08:56:25

From: mysterious123
You might find this weird and unbelievable, but Jagex isn't random with its randoms.

I keep getting the same proggies, yes the proggies are working, the script is working. Whatever is stopping the script is of course a random. And a random keeps showing after that amount of logs… Always. Keeps being 1296 logs.
I'll show you next proggy… Very weird.

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.21 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 2 Hours, 32 Minutes and 40 Seconds ]
[ Loads Done: 48 ]
[ Logs Chopped: 1296 ]
[ Levels Gained: 0 ]
[ Exp Gained: 87480 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]

Always after EXACTLY that amount? That's the weirdest thing I've ever seen.

mysterious123

2010-03-05 10:18:16

From: Coh3n
Always after EXACTLY that amount? That's the weirdest thing I've ever seen.

Second report: I proved my point:

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.21 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 2 Hours, 13 Minutes and 56 Seconds ]
[ Loads Done: 48 ]
[ Logs Chopped: 1296 ]
[ Levels Gained: 1 ]
[ Exp Gained: 87480 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]

Coh3n

2010-03-05 10:19:41

From: mysterious123
Second report: I proved my point:

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.21 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 2 Hours, 13 Minutes and 56 Seconds ]
[ Loads Done: 48 ]
[ Logs Chopped: 1296 ]
[ Levels Gained: 1 ]
[ Exp Gained: 87480 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]

What the…? I honestly don't know what to say to that…

mysterious123

2010-03-05 10:22:30

From: Coh3n
What the…? I honestly don't know what to say to that…

And I got a random too… So it's not a problem with your script.

Is this a bug in Runescape? Since this is like my 6th or 7th time.

twobac

2010-03-05 10:23:22

well i gues that 1296 logs is a random number!

4060 logs still running :)
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 10 Hours, 29 Minutes and 36 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[/php]

Coh3n

2010-03-05 10:23:43

From: mysterious123
And I got a random too… So it's not a problem with your script.

Is this a bug in Runescape? Since this is like my 6th or 7th time.

I honestly don't know. It could be. I've never heard of anything like this happening before.

From: twobac
well i gues that 1296 logs is a random number!

4060 logs still running :)
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 10 Hours, 29 Minutes and 36 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[/php]

Nice! I love the long proggys you get! :)

Dgby714

2010-03-05 10:24:23

From: mysterious123
And I got a random too… So it's not a problem with your script.

Is this a bug in Runescape? Since this is like my 6th or 7th time.

That is a little spooky maybe there watchen you O.o

mysterious123

2010-03-05 10:25:02

From: twobac
well i gues that 1296 logs is a random number!

4060 logs still running :)
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 10 Hours, 29 Minutes and 36 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[/php]

Doesn't seem so random when it happens many times.
What's the odds of that happening - unless it's not random but some bug.

Anyways - I'm running one account… So that's why it's not too many logs.

Edit: If they are watching me, it wouldn't happen this many times… And why would they make it so obvious.

Coh3n

2010-03-05 10:26:27

From: mysterious123
Doesn't seem so random when it happens many times.
What's the odds of that happening - unless it's not random but some bug.

Anyways - I'm running one account… So that's why it's not too many logs.

Yeah, two hours is a good report for one player. I would suggest setting to cut maybe only 1000 logs then stop. If the problem stops, then you can do whatever you want. :p

Dgby714

2010-03-05 10:27:58

From: mysterious123
Doesn't seem so random when it happens many times.
What's the odds of that happening - unless it's not random but some bug.

Anyways - I'm running one account… So that's why it's not too many logs.

Edit: If they are watching me, it wouldn't happen this many times… And why would they make it so obvious.

Is it the same random? (ill read the answer tomorrow im goin to bed 4 hrs past bedtime….)

mysterious123

2010-03-05 10:28:25

From: Coh3n
Yeah, two hours is a good report for one player. I would suggest setting to cut maybe only 1000 logs then stop. If the problem stops, then you can do whatever you want. :p

I've tried playing around with it, I set once a 20 min break… Done it - though I wanted it to be more immediate. Even though it got me 2k+ logs.. Though in 7 hours instead of 4.

So I set it back - and the 'bug' happened again.

Dgby - Nope, always a different one.

Coh3n

2010-03-05 12:17:38

From: mysterious123
I've tried playing around with it, I set once a 20 min break… Done it - though I wanted it to be more immediate. Even though it got me 2k+ logs.. Though in 7 hours instead of 4.

So I set it back - and the 'bug' happened again.

Dgby - Nope, always a different one.

Well even though it took longer, it does look less suspisous.

twobac

2010-03-05 13:06:32

[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 13 Hours, 9 Minutes and 44 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 T 3 84 0 5670 1 ]
[ wc02 F 2 56 0 3780 1 ]
[ wc03 F 2 56 0 3780 1 ]
[ wc04 T 20 560 19 37800 10 ]
[ wc05 T 18 503 2 33952 9 ]
[ wc06 T 20 560 6 37800 10 ]
[ wc07 T 20 560 0 37800 10 ]
[ wc08 T 18 504 3 34020 9 ]
[ wc09 F 18 504 2 34020 9 ]
[ wc10 F 18 504 5 34020 9 ]
[ wc11 T 13 363 2 24502 6 ]
[ wc12 T 12 336 4 22680 6 ]
[ wc13 F 0 0 0 0 0 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/php]
SMART died, just went to blank screen??

wc01, 02 & 13 all could not leave the bank? not sure why as did not see?

spart300

2010-03-05 15:00:37

Ok so i updated SRL and it came with all the files I needed. It even came with some new Random event finders too. :) So it's running now i'll let you know if anything happens

Coh3n

2010-03-05 15:08:20

From: twobac
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 13 Hours, 9 Minutes and 44 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 T 3 84 0 5670 1 ]
[ wc02 F 2 56 0 3780 1 ]
[ wc03 F 2 56 0 3780 1 ]
[ wc04 T 20 560 19 37800 10 ]
[ wc05 T 18 503 2 33952 9 ]
[ wc06 T 20 560 6 37800 10 ]
[ wc07 T 20 560 0 37800 10 ]
[ wc08 T 18 504 3 34020 9 ]
[ wc09 F 18 504 2 34020 9 ]
[ wc10 F 18 504 5 34020 9 ]
[ wc11 T 13 363 2 24502 6 ]
[ wc12 T 12 336 4 22680 6 ]
[ wc13 F 0 0 0 0 0 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/php]
SMART died, just went to blank screen??

wc01, 02 & 13 all could not leave the bank? not sure why as did not see?

Lag, perhaps? What'd the debug say?

And that SMART bug happens all the time, usually from minimizing and restoring too many times.

spart300

2010-03-05 16:10:04

I got a runtime error from the new login page. Let me update to rev 32 of the script and give it a try. It happened when it went to take a break.

Taking a short break…
[Runtime Error] : Out Of Range in line 297 in script C:\Users\Steve\Desktop\scarprerelease\includes\SRL\SRL\Core\Login.scar

spart300

2010-03-05 19:39:19

I just don't get it, everytime I go to take a break it gets that error. Looks like it needs to update SRL again.

xSaintias

2010-03-05 19:40:05

i dont know if this is supposed to happen, but before smart finishes loading, it closes.
also, it is no longer in scarprereleases folder after it closes…
i have to update again to get scar.exe back….
anyone know what is happening?

spart300

2010-03-05 19:49:31

Idk man mine isn;t moving around like that. It opens fine and doesn't close. Also an update to my previous problem; It isn't messing up the logging out now for some odd reason.

Do you have Norton Antivirus or a popular antivirus prgram? Sometime sit will think scar.exe is a trojan horse and will delete it from your computer, causing anything ran from scar (smart and etc) to shut off unexpectedly

xSaintias

2010-03-05 20:49:11

From: spart300
Idk man mine isn;t moving around like that. It opens fine and doesn't close. Also an update to my previous problem; It isn't messing up the logging out now for some odd reason.

Do you have Norton Antivirus or a popular antivirus prgram? Sometime sit will think scar.exe is a trojan horse and will delete it from your computer, causing anything ran from scar (smart and etc) to shut off unexpectedly

yes, i do. but it is turned off…
Edit: its mcafee

spart300

2010-03-05 20:52:27

Weird.. I think it did it for another person too. You tried to update SRL? There are alot of new updates you might need to re-update your whole SRL folder. It might hopefully solve the problem.

ilikenubs

2010-03-06 02:13:17

stops after it finds hatchet for some reason

fieri3xjohn

2010-03-06 04:38:37

I got 3 randoms today, and the script didnt solve them
They following where, the party one, Bob's island, seargeant drill

spart300

2010-03-06 07:46:33

Yeah mine got stuck in one. Didn't even know it was there. Did yours notice it was in them Fieri?

Edit: I finially figured ot how to sign up for the stats so I will finally be able to help out with your stats lol.. Sorry.

twobac

2010-03-06 13:01:01

[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 14 Hours, 37 Minutes and 18 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 T 20 560 1 37800 10 ]
[ wc02 T 20 560 1 37800 10 ]
[ wc03 T 20 560 1 37800 10 ]
[ wc04 T 18 504 1 34020 9 ]
[ wc05 F 18 504 1 34020 9 ]
[ wc06 F 18 504 0 34020 9 ]
[ wc07 T 18 504 1 34020 9 ]
[ wc08 T 4 112 0 7560 2 ]
[ wc09 T 5 140 1 9450 2 ]
[ wc10 T 14 392 53 26460 7 ]
[ wc11 T 9 252 2 17010 4 ]
[ wc12 T 18 504 3 34020 9 ]
[ wc13 T 18 504 3 34020 9 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed[/php]

smart stopped working as i tried to run another scar window with the download client :(

Dgby714

2010-03-06 13:06:15

From: twobac
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 14 Hours, 37 Minutes and 18 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 T 20 560 1 37800 10 ]
[ wc02 T 20 560 1 37800 10 ]
[ wc03 T 20 560 1 37800 10 ]
[ wc04 T 18 504 1 34020 9 ]
[ wc05 F 18 504 1 34020 9 ]
[ wc06 F 18 504 0 34020 9 ]
[ wc07 T 18 504 1 34020 9 ]
[ wc08 T 4 112 0 7560 2 ]
[ wc09 T 5 140 1 9450 2 ]
[ wc10 T 14 392 53 26460 7 ]
[ wc11 T 9 252 2 17010 4 ]
[ wc12 T 18 504 3 34020 9 ]
[ wc13 T 18 504 3 34020 9 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed[/php]

smart stopped working as i tried to run another scar window with the download client :(

You know nick is sopost to be 3-4 non uppercase letters of the Players username, right?

spart300

2010-03-06 13:23:00

Awesome Twobac. I saw you running it from the stats site lol. I was wondering how long you were goin. I'm still going I'm just using 1 char though.

Edit: today is a saturday so I can practically play all day :p

Coh3n

2010-03-06 15:02:52

Sorry guys, I've been reformatting my computer for the last couple days, so I've been real busy.

From: Dgby714
You know nick is sopost to be 3-4 non uppercase letters of the Players username, right?

I'm guessing he manually changed the names so the nicknames didn't show on the forums. If you were to have an invalid nickname, the script would tell you I'm pretty sure.

For runtime errors: Update your SRL, if there was an issue, I'm sure it's been fixed by now.

For randoms: It's not going to detect EVERY random, and it's not going to solve EVERY random. You just have to accept that.

spart300

2010-03-06 15:34:40

[============================ Rev.32 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 7 Hours, 2 Minutes and 50 Seconds ]
[ Loads Done: 100 ]
[ Logs Chopped: 2800 ]
[ Levels Gained: 2 ]
[ Exp Gained: 189000 ]
[ Breaks: 4 ]
[ ]
[=================================================================]
[=================================================================]

I got some socket error when it banked and he got stuck at the bank. any idea?
Socket Error # 10054
Connection reset by peer.

He was about to take a short break but the report never came up and he just sat there. It's weird soemtimes it takes too long for him to get the report so he will just sit at the bank until he does. Also it was time for his 5th break.

Coh3n

2010-03-06 15:37:28

From: spart300
[============================ Rev.32 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 7 Hours, 2 Minutes and 50 Seconds ]
[ Loads Done: 100 ]
[ Logs Chopped: 2800 ]
[ Levels Gained: 2 ]
[ Exp Gained: 189000 ]
[ Breaks: 4 ]
[ ]
[=================================================================]
[=================================================================]

I got some socket error when it banked and he got stuck at the bank. any idea?
Socket Error # 10054
Connection reset by peer.

He was about to take a short break but the report never came up and he just sat there. It's weird soemtimes it takes too long for him to get the report so he will just sit at the bank until he does. Also it was time for his 5th break.

That's a good report. :) And I'm pretty sure Socket errors occur when your network connection is reset, or something along those lines. You can try googling for more information.

spart300

2010-03-06 15:42:49

Hmm.. Probably some random lag. But I never get lag!! NOO!! lol. Yeah probably lag. Yeah I was happy. Had to pause a few times for the randoms though. It tried to identify randoms. "possible random:" but was always wrong. So i think i'm just unlucky in the department

Coh3n

2010-03-06 15:44:12

From: spart300
Hmm.. Probably some random lag. But I never get lag!! NOO!! lol. Yeah probably lag. Yeah I was happy. Had to pause a few times for the randoms though. It tried to identify randoms. "possible random:" but was always wrong. So i think i'm just unlucky in the department

Yeah, it's actually A LOT harder than you'd think to make a working random's solver.

Dgby714

2010-03-06 15:47:11

From: Coh3n
Sorry guys, I've been reformatting my computer for the last couple days, so I've been real busy.

I'm guessing he manually changed the names so the nicknames didn't show on the forums. If you were to have an invalid nickname, the script would tell you I'm pretty sure.

For runtime errors: Update your SRL, if there was an issue, I'm sure it's been fixed by now.

For randoms: It's not going to detect EVERY random, and it's not going to solve EVERY random. You just have to accept that.

There is a procedure to call to check nicks but it doesn't automatically.

From: spart300
[============================ Rev.32 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 7 Hours, 2 Minutes and 50 Seconds ]
[ Loads Done: 100 ]
[ Logs Chopped: 2800 ]
[ Levels Gained: 2 ]
[ Exp Gained: 189000 ]
[ Breaks: 4 ]
[ ]
[=================================================================]
[=================================================================]

I got some socket error when it banked and he got stuck at the bank. any idea?
Socket Error # 10054
Connection reset by peer.

He was about to take a short break but the report never came up and he just sat there. It's weird soemtimes it takes too long for him to get the report so he will just sit at the bank until he does. Also it was time for his 5th break.

I think you had a problem connecting to the stats site!

Coh3n

2010-03-06 15:48:58

From: Dgby714
There is a procedure to call to check nicks but it doesn't automatically.

I think you had a problem connecting to the stats site!

You learn new things every day…

Dgby714

2010-03-06 15:51:30

From: Coh3n
You learn new things every day…

FoundIt, its


{*******************************************************************************
procedure CheckUserNicks;
By: Sumilion, Raymond, and Nava2
Description: Checks if all nicks are set correct.
*******************************************************************************}

Biskit

2010-03-06 17:22:34

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 7 Hours, 35 Minutes and 45 Seconds ]
[ Loads Done: 148 ]
[ Logs Chopped: 3995 ]
[ Levels Gained: 2 ]
[ Exp Gained: 269662 ]
[ Breaks: 4 ]
[ ]
[=================================================================]
[=================================================================][/PHP]

it was stopped by random

Coh3n

2010-03-06 17:23:33

From: Biskit
[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 7 Hours, 35 Minutes and 45 Seconds ]
[ Loads Done: 148 ]
[ Logs Chopped: 3995 ]
[ Levels Gained: 2 ]
[ Exp Gained: 269662 ]
[ Breaks: 4 ]
[ ]
[=================================================================]
[=================================================================][/PHP]

it was stopped by random

Very nice, I'll add that to the first post. :)

ilikenubs

2010-03-06 19:49:17

i dunno i did everything but mine finds the hatchet goes to where the willows are and does nothing

Coh3n

2010-03-06 19:56:02

From: ilikenubs
i dunno i did everything but mine finds the hatchet goes to where the willows are and does nothing

More information would be helpful. Like what it said in the debug box. I'd really appreciate it if people started reading the first post.

ilikenubs

2010-03-06 20:07:17

Loading, please wait…
SRL Compiled in 31 msec
SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.
Welcome to Runescape.
*********<<< character name
Creating the NickTPA.
Current Woodcutting level: 63
Found hatchet!

Gets to there and then does nothing, when i check smart screen character is beside willows and red cursor is resting on inventory icon

realized i only had scar 3.22, so i got 3.23 but now i get this error while compiling
Line 715: [Error] (23262:1): Duplicate identifier 'options' in script C:\Users\********\Desktop\New Folder\DCnB_Form.scar

fieri3xjohn

2010-03-06 20:36:33

Mine didn't notice, the randoms
and it just logged out of inactivity

twobac

2010-03-06 21:50:55

From: ilikenubs
Loading, please wait…
SRL Compiled in 31 msec
SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.
Welcome to Runescape.
*********<<< character name
Creating the NickTPA.
Current Woodcutting level: 63
Found hatchet!

Gets to there and then does nothing, when i check smart screen character is beside willows and red cursor is resting on inventory icon

realized i only had scar 3.22, so i got 3.23 but now i get this error while compiling
Line 715: [Error] (23262:1): Duplicate identifier 'options' in script C:\Users\********\Desktop\New Folder\DCnB_Form.scar

This sounds like a problem i had when setting up scar. the only way i got around it was to delete all of the scar folders I had (copied the scripts to another location), re followed Coh3n tutorial on the setup, (apart from 1 step, created the scarprerelease folder first) then downloaded SVN and when i got the permissions error, i just redid that step (as all the permissions were okay). As soon as I had done that and copied the includes, the "Duplicate identifer" error disappeared.

As for previous questions.

Sorry guys, I've been reformatting my computer for the last couple days, so I've been real busy.

Quote:
Originally Posted by Dgby714
You know nick is sopost to be 3-4 non uppercase letters of the Players username, right?

I'm guessing he manually changed the names so the nicknames didn't show on the forums. If you were to have an invalid nickname, the script would tell you I'm pretty sure.

For runtime errors: Update your SRL, if there was an issue, I'm sure it's been fixed by now.

For randoms: It's not going to detect EVERY random, and it's not going to solve EVERY random. You just have to accept that.

Cohn3 - real pain reformatting :(
Nicknames - I manually change all of the nicknames everytime I post a proggy, it would be too easy for Jagex to look at all the proggies on this site and work out which players are using scar. I bet most of you will use characters 2-5 from ur username! even if its not those chars it will be 4 sequential characters and they have the database, so they could find the user.

As for the script checking the nick, you can put anything there and it will not tell you it is invalid, I have just run the script with player 'skywalk' and used nick 'tony'. no error was given, although I bet that any randoms will not be caught!

You got to love SMS, I'm trying to beat FateofRoses, and by tomorrow morning, I'm hoping to have top spot! :D

Coh3n

2010-03-06 21:55:43

From: twobac

Cohn3 - real pain reformatting :(
Nicknames - I manually change all of the nicknames everytime I post a proggy, it would be too easy for Jagex to look at all the proggies on this site and work out which players are using scar. I bet most of you will use characters 2-5 from ur username! even if its not those chars it will be 4 sequential characters and they have the database, so they could find the user.

As for the script checking the nick, you can put anything there and it will not tell you it is invalid, I have just run the script with player 'skywalk' and used nick 'tony'. no error was given, although I bet that any randoms will not be caught!

You got to love SMS, I'm trying to beat FateofRoses, and by tomorrow morning, I'm hoping to have top spot! :D

Yes it is a huge pain. And you'll be ahead of him soon enough. :p

ilikenubs

2010-03-06 22:10:19

two bac - tried what u said, but i still got the line 715 double identifier error

Coh3n

2010-03-06 22:12:26

From: ilikenubs
two bac - tried what u said, but i still got the line 715 double identifier error

Delete line 715, and try again.

ilikenubs

2010-03-06 22:15:55

After deleting line 715 i get this error

Line 716: [Error] (23036:1): Identifier expected in script C:\Users\******\Desktop\New Folder\DCnB_Form.scar

twobac

2010-03-06 22:21:35

Ok, I have just checked out the latest includes rev 414, and now I am getting the line 715 duplicate error! :(

Going to investigate.

EDIT: Reverting to Rev 413
Edit2: Did not help. Going for the full uninstall of scar and script and re-install.

i luffs yeww

2010-03-06 23:14:46

Nevermind.

Coh3n, you can't use options as a variable name. :) If you change it to options2 or something then it works.

So for anyone that wants to use this before Coh3n updates it, change lines 713-719 in DCnB_Form.scar to..


function frm_BoolToBool(s: String): Boolean;
var
  Options2: TStringArray;
begin
  Options2 := ['Yes', 'Equipped', 'Members', 'High', 'Signed'];
  Result := InStrArr(s, Options2, False);
end;

:) Nice script, Coh3n.

twobac

2010-03-06 23:28:45

From: i luffs yeww
Nevermind.

Coh3n, you can't use options as a variable name. :) If you change it to options2 or something then it works.

So for anyone that wants to use this before Coh3n updates it, change lines 713-719 in DCnB_Form.scar to..
function frm_BoolToBool(s: String): Boolean;
var
  Options2: TStringArray;
begin
  Options2 := ['Yes', 'Equipped', 'Members', 'High', 'Signed'];
  Result := InStrArr(s, Options2, False);
end;
:) Nice script, Coh3n.

Well Done for working that one out! At least I am totally upto date with every thing now after reinstalling it all again :)

ilikenubs

2010-03-06 23:48:09

just a sort of off topic question, which would be better for exp coh3ns draynor chop n bank, or his power chopper? Right now im using the power chopper, but im wondering if banking would be faster than just dropping and therefore lead to more exp.

Coh3n

2010-03-06 23:51:32

From: ilikenubs
just a sort of off topic question, which would be better for exp coh3ns draynor chop n bank, or his power chopper? Right now im using the power chopper, but im wondering if banking would be faster than just dropping and therefore lead to more exp.

If you're Powerchopping at Draynor, then I think banking is faster.

Also, to everyone getting the Duplicate identifier error ~ update to revision 33. Sorry about all that, I would have fixed sooner, but I started using Ubuntu, and everything is different. It's going to take some getting used to. :p

Anywho, thanks yeww for that temp fix, even if it wasn't for long. :p

Cheers,
Coh3n

mysterious123

2010-03-07 00:02:27

Why did the script say:
'Your Account Has been Banned.'

When I'm not banned at all? Was stuck in the evil sister random.
It scared the hell out of me for a moment!

Coh3n

2010-03-07 00:04:09

From: mysterious123
Why did the script say:
'Your Account Has been Banned.'

When I'm not banned at all? Was stuck in the evil sister random.
It scared the hell out of me for a moment!

Lol wow I'd be shitting my pants. I'm not sure why that would happen. It has nothing to do with my script, though. That part is in SRL. You should post about it in the Public SVN bugs section.

mysterious123

2010-03-07 00:25:51

From: Coh3n
Lol wow I'd be shitting my pants. I'm not sure why that would happen. It has nothing to do with my script, though. That part is in SRL. You should post about it in the Public SVN bugs section.

From: i luffs yeww
It's not fixed in the newest SRL, as far as I know. But it can't hurt! :D I update at least once a day. Always before and after I auto. Unless I'm autoing the whole day..

It's a problem with the script by the way. Not much anyone can do to fix that. It's just because RuneScape colors are so similar in banks. :/

HeHe I change Simba to autoupdate my SRL when I open it lol

fieri3xjohn

2010-03-07 02:47:23

:| How do I know I can trust IceFire, I got another random event. Molly, one but solved myself, forgot about IceFire and I'm not sure about giving pass to him…/her….

Dgby714

2010-03-07 02:58:37

From: fieri3xjohn
:| How do I know I can trust IceFire, I got another random event. Molly, one but solved myself, forgot about IceFire and I'm not sure about giving pass to him…/her….

You don't have to trust him but if you want randoms to be fixed anytime soon he needs accounts in randoms…

fieri3xjohn

2010-03-07 04:18:21

kk, jeez so many random events so far today like 4-5
all of them i had to manually do :)

Coh3n

2010-03-07 09:59:56

From: fieri3xjohn
:| How do I know I can trust IceFire, I got another random event. Molly, one but solved myself, forgot about IceFire and I'm not sure about giving pass to him…/her….

I've let him use my accounts before, you don't have anything to worry about. However, if you're using your main, I don't blame you if you don't want anyone on your account.

From: fieri3xjohn
kk, jeez so many random events so far today like 4-5
all of them i had to manually do :)

Yeah, that's about all you can do right now. At least until some of the randoms can get fixed. To be honest, a lot of the randoms have working solvers, there's just some colors that need to be tweaked. For any randoms that aren't solved, visit this thread.

mysterious123

2010-03-07 10:03:14

Not sure what this error is, but this isn't the first time it happens.
I'm glad it happens because every time it doesn't happen - I get randoms exactly at the same log count. So thank you for the error - but what causes this error….:

[Runtime Error] : Exception: Access violation at address 006CE72A in module 'scar.exe'. Read of address FFFFFFFF in line 283 in script C:\Documents and Settings\Daniel\Desktop\scarprerelease\includes\SRL\SRL\Core\Text.scar

Coh3n

2010-03-07 10:05:45

From: mysterious123
Not sure what this error is, but this isn't the first time it happens.
I'm glad it happens because every time it doesn't happen - I get randoms exactly at the same log count. So thank you for the error - but what causes this error….:
[Runtime Error] : Exception: Access violation at address 006CE72A in module 'scar.exe'. Read of address FFFFFFFF in line 283 in script C:\Documents and Settings\Daniel\Desktop\scarprerelease\includes\SRL\SRL\Core\Text.scar

That is one of the bug in SCAR. Similar to DIB handle's and such. There's nothing you can do about that other than restarting SCAR. I still find it amazing that you get a random at the exact same time, every time. Lol.

EDIT: @twobac: Congrats, you're now the number one user of this script! The first post has been updated accordingly. :)

mysterious123

2010-03-07 12:26:49

From: Coh3n
That is one of the bug in SCAR. Similar to DIB handle's and such. There's nothing you can do about that other than restarting SCAR. I still find it amazing that you get a random at the exact same time, every time. Lol.

EDIT: @twobac: Congrats, you're not the number one user of this script! The first post has been updated accordingly. :)

Yes, I found that amazing too… As they say, nothing is perfect.
In other words, runescape isn't perfect, in other words - Their randoms are built in a certain way that you get them upon doing certain things. So if you do the same thing one after the other without anything in between, you get the random at the same interval. (A theory I developed)

BTW:

EDIT: @twobac: Congrats, you're not the number one user of this script! The first post has been updated accordingly.

You said he ISN'T… Instead of he IS.

Coh3n

2010-03-07 12:31:16

From: mysterious123
Yes, I found that amazing too… As they say, nothing is perfect.
In other words, runescape isn't perfect, in other words - Their randoms are built in a certain way that you get them upon doing certain things. So if you do the same thing one after the other without anything in between, you get the random at the same interval. (A theory I developed)

BTW:

You said he ISN'T… Instead of he IS.

Lol oops! :duh: I mean "you are now". :p

Thanks. :)

mysterious123

2010-03-07 13:03:55

From: Coh3n
Lol oops! :duh: I mean "you are now". :p

Thanks. :)

Yeah, sure, I thought for a moment you were being sarcastic or something.
But then I saw you added him in the first post… Anyways, I saw that in the SRL Randoms thread it says many randoms are supposed to be solved.
Though my player keeps getting stuck in some of those randoms.

Is that some add-on in the script, or?? Since I see some randoms are solved, even though the player doesn't continue. Once I found a donut and a mysterious box, or actually twice, though it was still out near the trees.

Coh3n

2010-03-07 13:49:26

From: mysterious123
Yeah, sure, I thought for a moment you were being sarcastic or something.
But then I saw you added him in the first post… Anyways, I saw that in the SRL Randoms thread it says many randoms are supposed to be solved.
Though my player keeps getting stuck in some of those randoms.

Is that some add-on in the script, or?? Since I see some randoms are solved, even though the player doesn't continue. Once I found a donut and a mysterious box, or actually twice, though it was still out near the trees.

No, there's no add on. On the bugs thread, it says which ones are working, that the dev team knows about. If no one reports a bug about the random, they just assume that it's still working.

mysterious123

2010-03-07 16:07:37

I knew you wouldn't believe me if I told you it happened again. The 'random' 1296…. So I copied the whole progress report thing.

                                            ___          
                       ____                /\__\         
                      /\___\     ____      \/ _/         
       _____          \/_  /    /\___\      \/ _____     
      /\____\  _______/ / /___ _\/___ \_____  /\____\    
     / /  ___\/\______\/ /____\\____/ /_____\/ / ____\   
    / /  /__ / / ___  / ____  //___  / ____  \/ /___\    
   / /  /___\ / /__/ / / / / /____/ / /  / / /____  /    
   \/_______//______/_/ /_/_/______/_/__/_/_/____/ /     
                             \/___________________/      
                       Draynor Chop N' Bank Rev.21!      
Loading, please wait...
SRL Compiled in 15 msec
SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.
------------ < My Nickname was here
Creating the NickTPA.
Current Woodcutting Level: 84.
Found Hatchet!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
We have arrived at the bank!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 164
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Minutes and 57 Seconds                          ]
[      Loads Done: 1                                              ]
[      Logs Chopped: 27                                           ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 1822                                           ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 127171 ms.
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Performing Antiban - RandomRClick.
Uptext found!
Scanning for random events...
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 84
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 5 Minutes and 15 Seconds                          ]
[      Loads Done: 2                                              ]
[      Logs Chopped: 54                                           ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 3645                                           ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 265265 ms.
Uptext found!
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 161
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 8 Minutes and 13 Seconds                          ]
[      Loads Done: 3                                              ]
[      Logs Chopped: 81                                           ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 5468                                           ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 442750 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Performing Antiban - Boredhuman.
Scanning for random events...
Scanning for random events...
Performing Antiban - HoverSkill[Woodcutting].
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Scanning for random events...
Length: 144
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 11 Minutes and 10 Seconds                         ]
[      Loads Done: 4                                              ]
[      Logs Chopped: 108                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 7290                                           ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 619703 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Performing Antiban - RandomRClick.
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Performing Antiban - RandomRClick.
Performing Antiban - Boredhuman.
Uptext found!
Performing Antiban - HoverSkill[Random].
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
We have arrived at the bank!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 157
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 13 Minutes and 49 Seconds                         ]
[      Loads Done: 5                                              ]
[      Logs Chopped: 135                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 9112                                           ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 779406 ms.
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 114
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 16 Minutes and 36 Seconds                         ]
[      Loads Done: 6                                              ]
[      Logs Chopped: 162                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 10935                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 946375 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Scanning for random events...
Length: 175
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 20 Minutes and 23 Seconds                         ]
[      Loads Done: 7                                              ]
[      Logs Chopped: 189                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 12758                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 1173203 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
We have arrived at the bank!
Scanning for random events...
Length: 156
Successfully opened bank!
Found 27 logs in inventory.
HTTP/1.1 500 Internal Server Error
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 23 Minutes and 28 Seconds                         ]
[      Loads Done: 8                                              ]
[      Logs Chopped: 216                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 14580                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 1357703 ms.
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Scanning for random events...
Length: 93
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 27 Minutes and 25 Seconds                         ]
[      Loads Done: 9                                              ]
[      Logs Chopped: 243                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 16402                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 1594890 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Performing Antiban - Boredhuman.
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Scanning for random events...
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 84
Successfully opened bank!
Found 27 logs in inventory.
HTTP/1.1 500 Internal Server Error
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 31 Minutes and 17 Seconds                         ]
[      Loads Done: 10                                             ]
[      Logs Chopped: 270                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 18225                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 1826718 ms.
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Performing Antiban - RandomRClick.
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Scanning for random events...
Scanning for random events...
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 162
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 34 Minutes and 41 Seconds                         ]
[      Loads Done: 11                                             ]
[      Logs Chopped: 297                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 20048                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 2031421 ms.
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Performing Antiban - Boredhuman.
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Performing Antiban - RandomRClick.
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Performing Antiban - HoverSkill[Random].
Scanning for random events...
Length: 153
Successfully opened bank!
Found 27 logs in inventory.
HTTP/1.1 500 Internal Server Error
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 38 Minutes and 55 Seconds                         ]
[      Loads Done: 12                                             ]
[      Logs Chopped: 324                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 21870                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 2285000 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 152
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 42 Minutes and 9 Seconds                          ]
[      Loads Done: 13                                             ]
[      Logs Chopped: 351                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 23692                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 2479015 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Scanning for random events...
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Performing Antiban - HoverSkill[Random].
Scanning for random events...
Length: 133
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 45 Minutes and 20 Seconds                         ]
[      Loads Done: 14                                             ]
[      Logs Chopped: 378                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 25515                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 2670484 ms.
Uptext found!
Performing Antiban - Boredhuman.
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
We have arrived at the bank!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 148
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 48 Minutes and 22 Seconds                         ]
[      Loads Done: 15                                             ]
[      Logs Chopped: 405                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 27338                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 2852593 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Performing Antiban - RandomRClick.
Scanning for random events...
Scanning for random events...
Scanning for random events...
Length: 101
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 51 Minutes and 30 Seconds                         ]
[      Loads Done: 16                                             ]
[      Logs Chopped: 432                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 29160                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 3040484 ms.
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Performing Antiban - HoverSkill[Random].
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 126
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 54 Minutes and 38 Seconds                         ]
[      Loads Done: 17                                             ]
[      Logs Chopped: 459                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 30982                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 3227968 ms.
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Performing Antiban - HoverSkill[Random].
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 139
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 57 Minutes and 45 Seconds                         ]
[      Loads Done: 18                                             ]
[      Logs Chopped: 486                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 32805                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 3415656 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Uptext found!
Scanning for random events...
Performing Antiban - RandomRClick.
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
We have arrived at the bank!
Scanning for random events...
Length: 148
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 35 Seconds                               ]
[      Loads Done: 19                                             ]
[      Logs Chopped: 513                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 34628                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 3585375 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Performing Antiban - HoverSkill[Random].
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
We have arrived at the bank!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 161
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 3 Minutes and 53 Seconds                 ]
[      Loads Done: 20                                             ]
[      Logs Chopped: 540                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 36450                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 3783562 ms.
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Uptext found!
Tree has been cut down!
Uptext found!
We have arrived at the bank!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 162
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 6 Minutes and 32 Seconds                 ]
[      Loads Done: 21                                             ]
[      Logs Chopped: 567                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 38272                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 3941765 ms.
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 117
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 9 Minutes and 45 Seconds                 ]
[      Loads Done: 22                                             ]
[      Logs Chopped: 594                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 40095                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 4134734 ms.
Uptext found!
Performing Antiban - Boredhuman.
Scanning for random events...
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Performing Antiban - Boredhuman.
Scanning for random events...
Length: 162
** Warning in Bank_Open: Couldn't Choose Bank Option: Use-quickly. **
Length: 185
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 11 Minutes and 52 Seconds                ]
[      Loads Done: 23                                             ]
[      Logs Chopped: 621                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 41918                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 4262593 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Performing Antiban - Boredhuman.
Performing Antiban - RandomRClick.
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
We have arrived at the bank!
Scanning for random events...
Length: 142
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 14 Minutes and 47 Seconds                ]
[      Loads Done: 24                                             ]
[      Logs Chopped: 648                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 43740                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 4436812 ms.
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
We have arrived at the bank!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 155
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 17 Minutes and 46 Seconds                ]
[      Loads Done: 25                                             ]
[      Logs Chopped: 675                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 45562                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 4616468 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Scanning for random events...
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Performing Antiban - HoverSkill[Random].
Scanning for random events...
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 158
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 21 Minutes and 2 Seconds                 ]
[      Loads Done: 26                                             ]
[      Logs Chopped: 702                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 47385                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 4812046 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Scanning for random events...
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 81
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 25 Minutes and 10 Seconds                ]
[      Loads Done: 27                                             ]
[      Logs Chopped: 729                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 49208                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 5060046 ms.
Scanning for random events...
Uptext found!
Uptext found!
Scanning for random events...
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
We have arrived at the bank!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 156
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!

>> More in double post (I know it's not aloud, though it was a must in my case due to the character length to prove this weird - but amazing phenomenon)

mysterious123

2010-03-07 16:08:44

[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 27 Minutes and 48 Seconds                ]
[      Loads Done: 28                                             ]
[      Logs Chopped: 756                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 51030                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 5218203 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
We have arrived at the bank!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 154
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 30 Minutes and 13 Seconds                ]
[      Loads Done: 29                                             ]
[      Logs Chopped: 783                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 52852                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 5363593 ms.
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Scanning for random events...
Performing Antiban - HoverSkill[Random].
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 161
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 33 Minutes and 34 Seconds                ]
[      Loads Done: 30                                             ]
[      Logs Chopped: 810                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 54675                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 5564578 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 125
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 37 Minutes and 32 Seconds                ]
[      Loads Done: 31                                             ]
[      Logs Chopped: 837                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 56498                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 5802437 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Scanning for random events...
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 164
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 40 Minutes and 1 Seconds                 ]
[      Loads Done: 32                                             ]
[      Logs Chopped: 864                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 58320                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 5950796 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Scanning for random events...
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
We have arrived at the bank!
Scanning for random events...
Length: 184
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 43 Minutes and 14 Seconds                ]
[      Loads Done: 33                                             ]
[      Logs Chopped: 891                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 60142                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 6143796 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 172
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 45 Minutes and 54 Seconds                ]
[      Loads Done: 34                                             ]
[      Logs Chopped: 918                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 61965                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 6303984 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Scanning for random events...
Performing Antiban - RandomRClick.
Performing Antiban - HoverSkill[Woodcutting].
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Scanning for random events...
Length: 133
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 48 Minutes and 24 Seconds                ]
[      Loads Done: 35                                             ]
[      Logs Chopped: 945                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 63788                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 6453828 ms.
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Performing Antiban - Boredhuman.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Scanning for random events...
Length: 185
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 51 Minutes and 48 Seconds                ]
[      Loads Done: 36                                             ]
[      Logs Chopped: 972                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 65610                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 6658515 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
We have arrived at the bank!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 160
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 56 Minutes and 36 Seconds                ]
[      Loads Done: 37                                             ]
[      Logs Chopped: 999                                          ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 67432                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 6945937 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
Found Bank Symbol! Relocating ...
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 89
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 1 Hours, 59 Minutes and 49 Seconds                ]
[      Loads Done: 38                                             ]
[      Logs Chopped: 1026                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 69255                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 7139375 ms.
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Scanning for random events...
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 100
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 2 Minutes and 0 Seconds                  ]
[      Loads Done: 39                                             ]
[      Logs Chopped: 1053                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 71078                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 7269984 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 131
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 4 Minutes and 44 Seconds                 ]
[      Loads Done: 40                                             ]
[      Logs Chopped: 1080                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 72900                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 7433906 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 101
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 8 Minutes and 43 Seconds                 ]
[      Loads Done: 41                                             ]
[      Logs Chopped: 1107                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 74722                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 7673421 ms.
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 165
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 12 Minutes and 49 Seconds                ]
[      Loads Done: 42                                             ]
[      Logs Chopped: 1134                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 76545                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 7918796 ms.
Uptext found!
Scanning for random events...
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 120
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 15 Minutes and 27 Seconds                ]
[      Loads Done: 43                                             ]
[      Logs Chopped: 1161                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 78368                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 8076750 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Performing Antiban - Boredhuman.
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 192
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 17 Minutes and 56 Seconds                ]
[      Loads Done: 44                                             ]
[      Logs Chopped: 1188                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 80190                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 8225875 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Uptext found!
Performing Antiban - RandomRClick.
Uptext found!
Scanning for random events...
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Scanning for random events...
Tree has been cut down!
Uptext found!
Scanning for random events...
** Warning in Bank_Logs: Error Opening Bank ... Retrying ... **
** Warning in Bank_Logs: Error Finding Bank Screen. **
Length: 120
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 21 Minutes and 1 Seconds                 ]
[      Loads Done: 45                                             ]
[      Logs Chopped: 1215                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 82012                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 8411687 ms.
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Performing Antiban - Boredhuman.
Uptext found!
Tree has been cut down!
Uptext found!
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
Length: 169
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 23 Minutes and 57 Seconds                ]
[      Loads Done: 46                                             ]
[      Logs Chopped: 1242                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 83835                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 8587093 ms.
Uptext found!
Tree has been cut down!
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Performing Antiban - HoverSkill[Woodcutting].
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Scanning for random events...
Length: 85
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 27 Minutes and 33 Seconds                ]
[      Loads Done: 47                                             ]
[      Logs Chopped: 1269                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 85658                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 8802828 ms.
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
We have arrived at the bank!
Scanning for random events...
Length: 173
Successfully opened bank!
Found 27 logs in inventory.
Sucessfully Banked Logs!
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 30 Minutes and 44 Seconds                ]
[      Loads Done: 48                                             ]
[      Logs Chopped: 1296                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 87480                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Player: One: Logged in For: 8994625 ms.
Uptext found!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - HoverSkill[Random].
Scanning for random events...
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - RandomRClick.
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Trees: Trees Not Found.**
Uptext found!
Tree has been cut down!
Uptext found!
Tree has been cut down!
Uptext found!
Performing Antiban - Boredhuman.
Performing Antiban - HoverSkill[Woodcutting].
Tree has been cut down!
Uptext found!
Tree has been cut down!
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Tree: Error Finding Uptext. **
Scanning for random events...
** Warning in Chop_Trees: Couldn't find uptext after 50 tries, logging out. **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.21 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 2 Hours, 34 Minutes and 6 Seconds                 ]
[      Loads Done: 48                                             ]
[      Logs Chopped: 1296                                         ]
[      Levels Gained: 0                                           ]
[      Exp Gained: 87480                                          ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]
Successfully executed

Coh3n

2010-03-07 16:44:44

Lol, that's so weird. I know you are against it, but try updating the script to Revision 33, and see if that goes away.

i luffs yeww

2010-03-07 16:59:24

You didn't update the script/changelog, silly. :)

spart300

2010-03-07 18:38:35

Bout to say I just updated itand it still says rev 32 :o

twobac

2010-03-07 19:02:42

:D NUMBER 1 :D - Ok I'm at the top, now lets get the script from Number 2 to Number 1 ppl. And some else come knock me off this lofy perch :)

@Spart300, I have noticed that if you do a SVN update, the version number does not always change. If you rename the script file (to draynor chop & bank old), then do the svn update on the folder it will download the correct rev33. you can then copy your player details from old to the new version. :)

@mysterious123 - What have you set BREAK_AFTER to? I noticed that in ur proggy you run 48 loads before the random strikes, see what happens if you set BREAK_AFTER to = 15 loads, this means you will run for about 45 mins more than normal, but might mean you get past the 1296 limit?

i luffs yeww

2010-03-07 19:07:23

Twobac, what Spart was saying is that the script will still say it's at revision 32, when it's really at revision 33. This is due to Coh3n forgetting to change it to revision 33.

twobac

2010-03-07 19:10:01

oh ok

Coh3n

2010-03-07 23:42:23

From: i luffs yeww
Twobac, what Spart was saying is that the script will still say it's at revision 32, when it's really at revision 33. This is due to Coh3n forgetting to change it to revision 33.

Yeah that happens all the time. :p Don't always trust what it says in the script/change log. Trust what it says when you do the SVN Update. I'll try to be more consistent when updating. :p

I'd like someone to give me feedback on this ~ When you updated to Revision 33, when you click "Change Log" in tortoise SVN (not the ChangeLog.txt file), did it say what I updated (i.e. something like "Fixed the duplicate identifier error.")?

i luffs yeww

2010-03-07 23:46:59

According to http://dcnb.googlecode.com/svn/trunk/Change%20Log.txt, this is all it says.


[    Rev. 32:                                                                  ]
[      - Fixed a problem with the Simba version where the whole script was     ]
[        commented out.                                                        ]

Coh3n

2010-03-07 23:52:33

From: i luffs yeww
According to http://dcnb.googlecode.com/svn/trunk/Change%20Log.txt, this is all it says.
[    Rev. 32:                                                                  ]
[      - Fixed a problem with the Simba version where the whole script was     ]
[        commented out.                                                        ]

No, I know. I forgot to update that text file. I mean when you download the script via Tortoise SVN, there's an option to look at the Change Log. That's what I'm talking about. I'm just wondering because I updated using Ubunutu, so it's a different process.

fieri3xjohn

2010-03-08 03:13:51

EDIT: Can someone show the results of this auto-banker+cutter exp per hour with no breaks and the power cutter from c0h3n as well exp per hour with no breaks
I'm not sure but the powercutting seemed more useful as it worked better and seemed also faster
I think the trip from the willows to the bank, and finding the bank takes longer than dropping not sure
can someone prove this to me?

i luffs yeww

2010-03-08 03:28:11

Should.

mysterious123

2010-03-08 09:53:30

Suggestions for the script:

- Auto Responder for 'Wc levels' or any kind of combo such as 'wcutting level' and so on. Also for 'Hi' and if someone says your name…

- Sometimes making a mistake and forgetting to deposit all and such careless mistakes us humans do. (This was suggested somewhere)

- Part of the auto talker - to ask Wcing levels and such in different ways.
(Of course it shouldn't move the mouse while typing nor click…)

Coh3n

2010-03-08 12:00:41

From: fieri3xjohn
EDIT: Can someone show the results of this auto-banker+cutter exp per hour with no breaks and the power cutter from c0h3n as well exp per hour with no breaks
I'm not sure but the powercutting seemed more useful as it worked better and seemed also faster
I think the trip from the willows to the bank, and finding the bank takes longer than dropping not sure
can someone prove this to me?

If you Powerchop at Draynor, banking is faster. If you powerchop somewhere with 4 or 5 trees and no people, that will be faster.

From: mysterious123
Suggestions for the script:

- Auto Responder for 'Wc levels' or any kind of combo such as 'wcutting level' and so on. Also for 'Hi' and if someone says your name…

- Sometimes making a mistake and forgetting to deposit all and such careless mistakes us humans do. (This was suggested somewhere)

- Part of the auto talker - to ask Wcing levels and such in different ways.
(Of course it shouldn't move the mouse while typing nor click…)

I think your banking mistakes idea isn't so bad, but I will probably never add an auto responder to my scripts. I guarantee if you use an autorseponder, there's a better chance you'll get banned (unless it hold every possible situation imaginable) because if you respond do someone saying "wcing levels" or something like that, there's always that person who'll keep talking, and when you don't respond they automatically think you're autoing.

mysterious123

2010-03-08 12:03:36

From: Coh3n
If you Powerchop at Draynor, banking is faster. If you powerchop somewhere with 4 or 5 trees and no people, that will be faster.

I think your banking mistakes idea isn't so bad, but I will probably never add an auto responder to my scripts. I guarantee if you use an autorseponder, there's a better chance you'll get banned (unless it hold every possible situation imaginable) because if you respond do someone saying "wcing levels" or something like that, there's always that person who'll keep talking, and when you don't respond they automatically think you're autoing.

And turning camera view?

Coh3n

2010-03-08 12:06:41

From: mysterious123
And turning camera view?

Yeah. I took that out a while ago due to it causing the tree cut down method to be less accurate. I'm thinking about changing my current method, so I can implement camera movement, and hopefully lessen the amount of double clicking the trees.

mysterious123

2010-03-08 12:22:08

From: Coh3n
Yeah. I took that out a while ago due to it causing the tree cut down method to be less accurate. I'm thinking about changing my current method, so I can implement camera movement, and hopefully lessen the amount of double clicking the trees.

I actually find the double clicking more human…

Whoo hoo! I caught the random this time. I knew I'd get it in 1296 logs, so I waited and took a screeny.

How cool is that? :S

Coh3n

2010-03-08 13:52:52

From: mysterious123
I actually find the double clicking more human…

Whoo hoo! I caught the random this time. I knew I'd get it in 1296 logs, so I waited and took a screeny.

How cool is that? :S

More human eh? I guess I could add in the camera movement, and see how it goes.

And, wow… I don't know what to say.

mysterious123

2010-03-08 13:56:04

I'm sure we could somehow simulate what happened that caused this bug to appear and somehow ride on it in a sort of way.
If we find the source to this bug, I'm sure autoing would be easier than ever because we will then know when a random is going to show.

Coh3n

2010-03-08 13:58:51

From: mysterious123
I'm sure we could somehow simulate what happened that caused this bug to appear and somehow ride on it in a sort of way.
If we find the source to this bug, I'm sure autoing would be easier than ever because we will then know when a random is going to show.

Except for every person except you, they are random. Why don't you set it to break right after to bank the load before you get the random? That way you probably won't get a random.

mysterious123

2010-03-08 14:02:00

From: Coh3n
Except for every person except you, they are random. Why don't you set it to break right after to bank the load before you get the random? That way you probably won't get a random.

Because when I set it back after I run a few times with a break, it still stops at 1296… So it doesn't really matter.

And yes, for now it only happens to me, I'm saying that if we find how to cause this bug to appear, I'm sure it'll be of much use in the SRL community.

Coh3n

2010-03-08 14:04:11

From: mysterious123
Because when I set it back after I run a few times with a break, it still stops at 1296… So it doesn't really matter.

And yes, for now it only happens to me, I'm saying that if we find how to cause this bug to appear, I'm sure it'll be of much use in the SRL community.

So you're saying no matter how many breaks you take in between, you always get the random at 1296?

How would it be useful? I mean, it's not like our solvers will suddenly start working.

spart300

2010-03-08 14:33:11

Thats so weird cause I go over that amount everytime. (shown in my single player progs) I think it's quite cool that you always get a random at that amount.

mysterious123

2010-03-08 14:41:04

From: spart300
Thats so weird cause I go over that amount everytime. (shown in my single player progs) I think it's quite cool that you always get a random at that amount.

If only it stopped at 2k logs instead XD

twobac

2010-03-08 15:01:26

This is now the top script on SMS!!! :D

Coh3n

2010-03-08 15:05:05

From: twobac
This is now the top script on SMS!!! :D

So it is! :D

I'm working on a couple updates right now, so be ready for a new version within an hour. :)

EDIT: Just committed revision 34. :)

mysterious123

2010-03-08 15:29:04

BTW, hope this isn't spamming the thread, but here is another proof of the amazing bug.
I got summoned to the Mime Random:

(This will be my last proof, since I've spammed this thread enough… :S)

Coh3n

2010-03-08 15:31:10

From: mysterious123
BTW, hope this isn't spamming the thread, but here is another proof of the amazing bug.
I got summoned to the Mime Random:

(This will be my last proof, since I've spammed this thread enough… :S)

From: spart300
woo you're right twobac t's number one and so are you! But in time I shall beat you. If only I used SRL stats earlier lol I'd be right behind you. It took me so long to sign up. BTW, It finally detected and solved a random. I was so happy! the Bee Keeper but on my srl stats it says the pillars. So whatevs lol. But now is it bad that at the bottom it still says "possible random: Bee keeper"?

It must have gotten gotten the events confused. It didn't cause problems running the script did it?

From: mysterious123
What's new in the two last revisions? (You didn't write in first post)

I haven't edited the first post for updates for the last 34 versions (i.e. since I started using a repository). The change log in with the script when you download it.

From: spart300

So close to being so proud :( Oh well it was a great run. He solved a random I'm happy bout that.

Yeah, that doesn't happen often, does it? :rolleyes:

From: spart300
sorry for the double post but wtf is this? lol

"Connection Closed Gracefully."

It got stuck in bank after it banked, the prog didn't come up or anything. And it said that lol. I paused the script then resumed and got it back working.

Uhm, you lost connection maybe? I don't know, I've never seen that before.

From: twobac
Cool rev 34, just downloaded :) I did the svn - show log and this matches the change log. Looking forward to using this as you have implemented my totals idea! :)

Cant run this yet as i'm running a long rev 32 at the moment with my army!

So far:35 hours, 13,746 logs, 491 loads, 927,854 xp, 124 breaks. god that took ages to add up! :)

Have set all players to chop 4000 logs, so I am 1/4 way thru! hoping this to beat 100 hours!!!

Edit: I am resetting the stuck players in SMS, getting them out of the randoms. I previously ran the script so it changed players every 2 loads, now set that to 10.

WOW, that's by far the longest report for this script. :) Also, I'm not sure if the totals will work right, I wasn't able to test as SCAR doesn't work well on Ubuntu. It seems to crash every time it tries to login.

spart300

2010-03-08 20:30:07

No Coh3n it didn't cause any problems. It made the script run a bit slower. As if it was being careful? But idk how to explain it well. And yeah I've never seen that message in my life lol. But other than that the script is working great. It is finding all of the randoms today. Just failed one (prison pete) But that's a hard one so I don't blame it lol. I think it had something to do with changing the nickname cause once I changed it it's been handling better. Just now the only problem is I have alot of banking errors.

Edit: lol spoke too soon. Didn't recognize the maze. I think by far that's the hardest for a bot to understand.

Coh3n

2010-03-08 20:46:41

From: spart300
No Coh3n it didn't cause any problems. It made the script run a bit slower. As if it was being careful? But idk how to explain it well. And yeah I've never seen that message in my life lol. But other than that the script is working great. It is finding all of the randoms today. Just failed one (prison pete) But that's a hard one so I don't blame it lol. I think it had something to do with changing the nickname cause once I changed it it's been handling better. Just now the only problem is I have alot of banking errors.

Edit: lol spoke too soon. Didn't recognize the maze. I think by far that's the hardest for a bot to understand.

Yeah, I'm pretty sure we don't have a working solver for the maze anyway. Also, what kind of banking errors are you getting?

spart300

2010-03-08 20:53:22

-> Bank_Logs: Failed to open bank, retrying…
-> Bank_Logs: Failed to find bank screen.

I'll get that about 3-4 times then it'll relocatewhich makes him leave the bank and come back in sometimes. Looks a bit weird?

Coh3n

2010-03-08 20:55:02

From: spart300
-> Bank_Logs: Failed to open bank, retrying…
-> Bank_Logs: Failed to find bank screen.

I'll get that about 3-4 times then it'll relocatewhich makes him leave the bank and come back in sometimes. Looks a bit weird?

Yeah, the idea of that was to go to the bank if the walking messed up and walked too far from the bank. I'll have to edit the bank finding function to make it work better.

Thanks,
Coh3n

EDIT: During my testing, I couldn't find anything wrong with it. But I did change the banking a little. I also edited breaking for multiplayer. Update to revision 35 and see the change log for details.

spart300

2010-03-09 15:38:22

Ok thanks man I'll test it as soon as I can and let you know. I gotta go back to work and lost is on tonight so I hope by tomarrow I can test it out again.

Brandom

2010-03-09 17:44:15

Good job with the Svn checkout method. Convenience ftw.

Coh3n

2010-03-09 17:48:31

From: Brandom
Good job with the Svn checkout method. Convenience ftw.

That was the idea. How are you a Jr. Member when you only have 2 posts?

EDIT: Nevermind, I forgot about the new rules. :p

twobac

2010-03-09 17:54:22

56 hours….23K logs :0

I have just changed logs to cut to Integers[P_TOTAL_LOGS] := 8000; it was 4000 when i started, amending this while the script is running? will it still use the old value??

I could change to 80,000 lol !

Coh3n

2010-03-09 17:58:30

From: twobac
56 hours….

And still going? :eek:

twobac

2010-03-09 19:15:16

Yes still going :)

spart300

2010-03-09 19:57:10

Damn dude how do you do it..

Coh3n

2010-03-09 20:07:23

From: spart300
Damn dude how do you do it..

Using a 15 account army (or however many it is :p).

ilikenubs

2010-03-09 20:11:46

damn coh3n you should make a yew chop n' bank

Coh3n

2010-03-09 20:13:33

From: ilikenubs
damn coh3n you should make a yew chop n' bank

Lol, I've had a lot of people tell me that. :p I need a really good location. I don't like Edgeville because of the surplus of people and randoms. If someone can find me an awesome F2P location then I'm willing to take a look. :)

ilikenubs

2010-03-09 20:57:24

you could try the 3 yews north of varrock palace (however it prolly has same problem as edgeville, rimmington as well less people far from bank tho

Coh3n

2010-03-09 20:59:57

From: ilikenubs
you could try the 3 yews north of varrock palace (however it prolly has same problem as edgeville, rimmington as well less people far from bank tho

I've thought about making a Rimmington banker for the various trees around. Not sure how different the price in GE is from the General Store price though.

ilikenubs

2010-03-09 21:15:46

Meh, i feel like rimmington is more of a powerchopping area anyway. I was powerchopping willows there earlier, but for some reason it never lasts as long as the banker

Coh3n

2010-03-09 21:17:12

From: ilikenubs
Meh, i feel like rimmington is more of a powerchopping area anyway. I was powerchopping willows there earlier, but for some reason it never lasts as long as the banker

Probably because it hasn't been updated in a long time. Since it's in the FFA section, it tends to not get as much feedback about bugs and such than scripts in the Jr. Members section.

twobac

2010-03-09 22:34:35

Coh3n,

quick question for you

"I have just changed logs to cut to Integers[P_TOTAL_LOGS] := 8000; it was 4000 when i started, amending this while the script is running? will it still use the old value??
" copied from previous post.

What do you think?

Now at 62 hrs, 24861 logs :) still going!

i luffs yeww

2010-03-09 22:35:58

If you change a script during run-time, it won't change what happens during run-time. :/

twobac

2010-03-09 22:49:42

Shame!

i luffs yeww

2010-03-09 22:54:54

Yup. It'd be quite an accomplishment to have a macroing program that's able to be manipulated with during run-time, and correspond to those changes. :p

fieri3xjohn

2010-03-09 23:41:03

zzzz, I was watching the script
and it was solving the sandwich lady.
it finished it
and got out
then it said it failed

i luffs yeww

2010-03-09 23:45:23

:/ No random solving problems are ever the script's fault.

"Any randoms that the script fails to solve is not the script's fault. For any solved randoms, please post the bug report on this thread."

fieri3xjohn

2010-03-09 23:56:41

well, it solved the problem…
and just said it failed will post on the other thread.

Mrbanana

2010-03-10 00:00:02

From: fieri3xjohn
well, it solved the problem…
and just said it failed will post on the other thread.

Really? one of my toons did it flawlessly yesterday…

Coh3n

2010-03-10 00:05:07

The randoms solvers are kind of unpredictable in my experience. Since Jagex has made the colors change so often, it's hard to keep the solvers working every time.

fieri3xjohn

2010-03-10 05:47:07

By the way, once it showed my wc level as -1 and said I couldnt cut the willows.//.

Coh3n

2010-03-10 11:07:11

From: fieri3xjohn
By the way, once it showed my wc level as -1 and said I couldnt cut the willows.//.

Yeah, that happens sometimes. That's a function in SRL, so there's nothing I can do about that. Just restart SCAR and you should be fine.

mysterious123

2010-03-10 12:52:21

I updated to revision 35, I got this error:

Line 533: [Hint] (24943:1): Variable 'I' never used in script C:\Documents and Settings\Daniel\Desktop\Scar\Scripts\Draynor Willower\Draynor Chop N' Bank [RUN ME].scar
Line 533: [Hint] (24943:1): Variable 'X' never used in script C:\Documents and Settings\Daniel\Desktop\Scar\Scripts\Draynor Willower\Draynor Chop N' Bank [RUN ME].scar
Line 533: [Hint] (24943:1): Variable 'Y' never used in script C:\Documents and Settings\Daniel\Desktop\Scar\Scripts\Draynor Willower\Draynor Chop N' Bank [RUN ME].scar
Line 705: [Error] (25115:5): Unknown identifier 'AtLobbyScreen' in script C:\Documents and Settings\Daniel\Desktop\Scar\Scripts\Draynor Willower\Draynor Chop N' Bank [RUN ME].scar

Mrbanana

2010-03-10 13:01:04

From: mysterious123
I updated to revision 35, I got this error:

I too get this error…

Failed when compiling
Line 533: [Hint] (24943:1): Variable 'I' never used in script C:\Documents and Settings\***\Desktop\Scar\Scripts\draynor\Draynor Chop N' Bank [RUN ME].scar
Line 533: [Hint] (24943:1): Variable 'X' never used in script C:\Documents and Settings\J***\Desktop\Scar\Scripts\draynor\Draynor Chop N' Bank [RUN ME].scar
Line 533: [Hint] (24943:1): Variable 'Y' never used in script C:\Documents and Settings\J***\Desktop\Scar\Scripts\draynor\Draynor Chop N' Bank [RUN ME].scar
Line 705: [Error] (25115:5): Unknown identifier 'AtLobbyScreen' in script C:\Documents and Settings\J***\Desktop\Scar\Scripts\draynor\Draynor Chop N' Bank [RUN ME].scar

Line 705:

if (AtLobbyScreen) then

Dgby714

2010-03-10 13:28:54

From: Mrbanana
I too get this error…

Failed when compiling
Line 533: [Hint] (24943:1): Variable 'I' never used in script C:\Documents and Settings\***\Desktop\Scar\Scripts\draynor\Draynor Chop N' Bank [RUN ME].scar
Line 533: [Hint] (24943:1): Variable 'X' never used in script C:\Documents and Settings\J***\Desktop\Scar\Scripts\draynor\Draynor Chop N' Bank [RUN ME].scar
Line 533: [Hint] (24943:1): Variable 'Y' never used in script C:\Documents and Settings\J***\Desktop\Scar\Scripts\draynor\Draynor Chop N' Bank [RUN ME].scar
Line 705: [Error] (25115:5): Unknown identifier 'AtLobbyScreen' in script C:\Documents and Settings\J***\Desktop\Scar\Scripts\draynor\Draynor Chop N' Bank [RUN ME].scar

Line 705:

if (AtLobbyScreen) then

IceFire renamed the AtLobbyScreen function to LobbyScreen

Just ctrl+R then replace AtLobbyScreen with LobbyScreen or add this to the script

function AtLobbyScreen: boolean;
begin
  Result := LobbyScreen;
end;

AaAaAaAaA

2010-03-10 13:56:56

Line 701: [Error] (24079:1): Unknown identifier 'ExitToLobby' in script C:\Documents and Settings\*****\Desktop\New Folder (2)\Draynor Chop N' Bank [RUN ME].scar

NCDS

2010-03-10 13:58:52

From: AaAaAaAaA
Line 701: [Error] (24079:1): Unknown identifier 'ExitToLobby' in script C:\Documents and Settings\*****\Desktop\New Folder (2)\Draynor Chop N' Bank [RUN ME].scar

Update your SRL.

AaAaAaAaA

2010-03-10 14:00:03

updated. Still got the error :O

NCDS

2010-03-10 14:08:33

From: AaAaAaAaA
updated. Still got the error :O

You use OpenDevSVN correct?

Coh3n

2010-03-10 14:51:55

Please update to Rev. 36, I updated the unknown identifier error.

mysterious123

2010-03-10 15:42:49

I got rev 35 working - but got this bug:
It randomly stops, then I get this:

-> Next_Player: All players inactive, terminating script…

Tried about five times to run it, after about 100-700 logs it will just say that - it all depends when I look at the Smart window. This bug didn't occur in rev 21, that's for sure.

i luffs yeww

2010-03-10 18:29:09

From: mysterious123
I got rev 35 working - but got this bug:
It randomly stops, then I get this:

Tried about five times to run it, after about 100-700 logs it will just say that - it all depends when I look at the Smart window. This bug didn't occur in rev 21, that's for sure.

:p Why not just update to rev 36? ;)

twobac

2010-03-10 19:32:21

ok here is a tastier of things to come
[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 26 Hours, 24 Minutes and 41 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ WC01 T 38 1063 2 71752 11 ]
[ WC02 T 38 1064 1 71820 11 ]
[ WC03 T 34 952 1 64260 9 ]
[ WC04 T 37 1036 1 69930 10 ]
[ WC05 T 22 616 2 41580 8 ]
[ WC06 T 24 672 1 45360 8 ]
[ WC07 T 22 616 9 41580 7 ]
[ WC08 T 26 728 6 49140 9 ]
[ WC09 T 26 728 3 49140 9 ]
[ WC10 T 24 672 2 45360 8 ]
[ WC11 T 12 336 2 22680 6 ]
[ WC12 T 24 672 4 45360 8 ]
[ WC13 T 25 699 4 47182 8 ]
[ ]
[=================================================================][/php]

Pretty Cool hey! :) wait for the next the 50 hr proggy :d

qarano

2010-03-11 10:33:53

I get an error on line 685, ExitToLobby is an unknown identifier.

I updated my SRL, and moved the plugins just to make sure it wasn't a problem on my end. Perhaps it's a problem with the latest rev of SRL, I'll try 415, and see if I can get it running.

cheers.

AaAaAaAaA

2010-03-11 11:59:05

Line 685: [Error] (24063:1): Unknown identifier 'ExitToLobby' in script C:\Documents and Settings\*****\Desktop\New Folder\Draynor Chop N' Bank [RUN ME].scar
lol i just cant win with this thing O_O

Rev. 36 btw

spart300

2010-03-11 14:35:31

You two are like..the only ones getting problems with this script. I think you both should uninstall and reinstall all your SRL components and redownload this script and update it all the way to 36. Making sure to update your SRL.

i luffs yeww

2010-03-11 15:01:41

Exit to lobby was recently added. That doesn't make much sense.. Hmm..

spart300

2010-03-11 15:39:46

Crap I just got that stupid error too

Line 689: [Error] (25013:5): Unknown identifier 'LobbyScreen' in script C:\Users\****\Desktop\Runescape\Draynor Chop N' Bank [RUN ME].scar

i luffs yeww

2010-03-11 16:41:19

Did something change in Login.scar? :p

twobac

2010-03-11 21:40:51

From: i luffs yeww
Did something change in Login.scar? :p

yes, new dev release 416 - I think the update was due to the old version having an error when you could not connect to server, the new version of the message was not being read correctly.

ok script ended :(

here are a few of the proggies :)

50 Hour report
[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 50 Hours, 22 Minutes and 15 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ WC01 T 68 1902 12 128384 14 ]
[ WC02 T 67 1876 2 126630 13 ]
[ WC03 T 64 1792 3 120960 12 ]
[ WC04 T 67 1876 2 126630 13 ]
[ WC05 T 62 1736 4 117180 12 ]
[ WC06 T 64 1792 2 120960 12 ]
[ WC07 T 60 1680 10 113400 10 ]
[ WC08 T 53 1484 8 100170 11 ]
[ WC09 T 46 1288 4 86940 11 ]
[ WC10 T 44 1232 4 83160 10 ]
[ WC11 T 42 1176 3 79380 9 ]
[ WC12 T 45 1260 7 85050 10 ]
[ WC13 T 36 1007 5 67972 9 ]
[ ]
[=================================================================][/PHP]

That was cool!

75 hour report
[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 75 Hours, 23 Minutes and 54 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ WC01 T 108 3022 14 203984 18 ]
[ WC02 T 105 2940 3 198450 16 ]
[ WC03 T 104 2912 3 196560 16 ]
[ WC04 T 100 2800 3 189000 16 ]
[ WC05 T 97 2715 6 183262 14 ]
[ WC06 T 84 2352 3 158760 14 ]
[ WC07 T 71 1988 10 134190 11 ]
[ WC08 T 87 2436 9 164430 14 ]
[ WC09 T 76 2128 6 143640 14 ]
[ WC10 T 69 1932 6 130410 12 ]
[ WC11 T 55 1540 5 103950 10 ]
[ WC12 T 55 1540 8 103950 11 ]
[ WC13 T 66 1847 5 124672 12 ]
[ ]
[=================================================================][/PHP]

WOW

final report
[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Ran For: 85 Hours, 28 Minutes and 38 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ WC01 T 118 3302 14 222884 19 ]
[ WC02 T 115 3220 3 217350 17 ]
[ WC03 T 114 3192 3 215460 17 ]
[ WC04 T 110 3080 3 207900 17 ]
[ WC05 T 107 2995 6 202162 16 ]
[ WC06 T 96 2688 3 181440 15 ]
[ WC07 T 91 2548 10 171990 13 ]
[ WC08 T 107 2996 11 202230 16 ]
[ WC09 T 88 2463 7 166252 15 ]
[ WC10 T 82 2295 7 154912 13 ]
[ WC11 T 66 1848 5 124740 11 ]
[ WC12 T 65 1820 8 122850 12 ]
[ WC13 T 76 2127 6 143572 13 ]
[ ]
[=================================================================]
[/PHP]

Loads - 1,235, Logs - 34,574, Levels - 86, Xp - 2,333,742, breaks - 194

Not sure why the script ended, my fault I am sure, until last night I had left the computer alone, but last night I used media centre to watch a movie on my server. when that had ended, the script had terminated with all players active, last debug lines
[PHP]-> Chop_Tree: Failed to find uptext
-> Chop_Tree: Failed to find uptext
NextPlayer
SwitchToPlayer(PlayerNo: 11, Active: True);
It has been 3 minutes and Runescape is not yet ready… Terminating.[/PHP] then "Successfully executed"

:spot:

Coh3n

2010-03-11 22:43:58

To anyone getting "Unknown identifier…" errors. Update to SRL Dev. Rev. 417! I just compiled this script (DCnB Rev. 36), and everything is working fine. If you're still getting errors, get SCAR 3.23, and read the first post! Half of the errors people are getting can be solved if they read the instructions.
_________________________________________________________

From: twobac

Not sure why the script ended, my fault I am sure, until last night I had left the computer alone, but last night I used media centre to watch a movie on my server. when that had ended, the script had terminated with all players active, last debug lines
[PHP]-> Chop_Tree: Failed to find uptext
-> Chop_Tree: Failed to find uptext
NextPlayer
SwitchToPlayer(PlayerNo: 11, Active: True);
It has been 3 minutes and Runescape is not yet ready… Terminating.[/PHP] then "Successfully executed"

:spot:

WOW, by far the longest report for this script! That 3 minutes mumbo jumbo is so annoying! I get it all the time because my internet connection is brutal. As far as I know, SRL terminates the script if it can't connect to the RS server after 3 minutes. Don't quote me on that though. I'd like to find out for myself as it is rather annoying.

Your 85 hour report has been added to the first post. Also, what are your player's woodcutting levels!?

mysterious123

2010-03-12 08:28:38

I don't why, but I keep getting the:

-> Chop_Trees: Failed to find tree

It just stops randomly. First time was 1.4k logs, the rest were like 200.

twobac

2010-03-12 09:34:18

From: Coh3n
To anyone getting "Unknown identifier…" errors. Update to SRL Dev. Rev. 417! I just compiled this script (DCnB Rev. 36), and everything is working fine. If you're still getting errors, get SCAR 3.23, and read the first post! Half of the errors people are getting can be solved if they read the instructions.
_________________________________________________________

WOW, by far the longest report for this script! That 3 minutes mumbo jumbo is so annoying! I get it all the time because my internet connection is brutal. As far as I know, SRL terminates the script if it can't connect to the RS server after 3 minutes. Don't quote me on that though. I'd like to find out for myself as it is rather annoying.

Your 85 hour report has been added to the first post. Also, what are your player's woodcutting levels!?

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.32 =============================]
[ ]
[ Levelling Report ]
[ ]
[ Nick start End Diff Reported Reported ]
[ lvl Lvl Lvl gain diff ]
[ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯ ¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ]
wc01 65 68 3 14 11
wc02 67 70 3 3 0
wc03 64 67 3 3 0
wc04 65 68 3 3 0
wc05 60 65 5 6 1
wc06 65 68 3 3 0
wc07 74 75 1 10 9
wc08 54 62 8 11 3
wc09 56 61 5 7 2
wc10 55 61 6 7 1
wc11 41 58 17 5 -12
wc12 53 59 6 8 2
wc13 53 59 6 6 0
[=================================================================][/PHP]

Coh3n

2010-03-12 10:50:46

From: mysterious123
I don't why, but I keep getting the:

It just stops randomly. First time was 1.4k logs, the rest were like 200.

Does is say that only one time? Or like 50?

@twobac: Apparently the levels gained calculation is still a little off. :p

spart300

2010-03-12 15:25:04

ok does anyone know how to fix this login error??

Nevermind, I got it to work finally.. Idk what i did to get it working.

Edit: thats weird he solved the sandwich lady but still said he failed and logged out.. lol.

***** STR: FOUND RANDOM: 'Sandwich Lady' *****
Sandwich Lady: Target: pie
***** STR: 'Sandwich Lady' RANDOM SOLVING FAILED! *****
-> Next_Player: All players inactive, terminating script…
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 5 Hours, 3 Minutes and 2 Seconds ]
[ Loads Done: 85 ]
[ Logs Chopped: 2379 ]
[ Levels Gained: 2 ]
[ Exp Gained: 160582 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed

twobac

2010-03-12 20:59:52

Just a bit off, only happens when there is a problem with my internet connection. I have a little proggie for you on the new rev. Nice I like the total line :). Stopped due to sat connection going down.[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ Ran For: 7 Hours, 23 Minutes and 38 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ wc01 T 0 0 0 0 0 ]
[ wc02 T 0 0 0 0 0 ]
[ wc03 T 5 139 0 9382 1 ]
[ wc04 T 10 280 1 18900 2 ]
[ wc05 T 10 280 1 18900 2 ]
[ wc06 T 10 280 1 18900 2 ]
[ wc07 T 10 280 0 18900 2 ]
[ wc08 T 10 280 0 18900 2 ]
[ wc09 T 10 280 1 18900 2 ]
[ wc10 T 10 280 0 18900 2 ]
[ wc11 T 10 280 0 18900 2 ]
[ wc12 T 10 280 0 18900 2 ]
[ wc13 T 8 224 1 15120 1 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 103 2883 5 194602 20 ]
[ ]
[=================================================================]
[/PHP]

Coh3n

2010-03-12 21:45:57

Nice, I'm glad the totals feature works. :)

Btw, are you just going to keep going and going until you get 99? Or banned? :p

twobac

2010-03-12 22:19:16

no i rotate the scripts every few weeks, then play manually. Never had a player banned, got to be smart :) target is lvl 85 for each, then …. we will just have to see :)

Coh3n

2010-03-12 23:26:46

From: twobac
no i rotate the scripts every few weeks, then play manually. Never had a player banned, got to be smart :) target is lvl 85 for each, then …. we will just have to see :)

Why the fuck are you using IE? >_>

Coh3n

2010-03-14 00:51:14

From: twobac
Well, I am very confident in this script and leave it running unattended all the time, the current instance of this script running is now at 4 hours and I have not checked it once. During the 85 hour run, I checked it around the following times 10:30, 12:30, 15:00, 21:00. I dont have too much free time, check for about 5-15 mins per time above just to solve failed randoms/see why number of loads is differnt. I set the break on number of loads to a small-ish number anywhere between 4 and 10 loads (7 seems to be pretty good) to allow a good break for each player, approx 4-5 hours before a player repeats.

8 of my players are miners and the average combat level is 42. Each player trades with one of my merch accounts to pass all the wealth to one location, When not choppin they be down the mines :)

I run about an hour a week on each of my top 10, doing something different such as doing a quest or following random ppl and critizing their dress sense! can be funny.

Seems like you have quite the operation going on. :p

From: spart300
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 6 Hours, 36 Minutes and 51 Seconds ]
[ Loads Done: 115 ]
[ Logs Chopped: 3220 ]
[ Levels Gained: 1 ]
[ Exp Gained: 217350 ]
[ Breaks: 0 ]
[ ]
[=================================================================]
[================================================================]
Stopped randomly I dont know why. It went to the lobby screen for some reason?

Also, I can't leave this script unattended because I get alot of randoms. Most of which the AntiRandoms doesn't find it and it will sit there lol untill enough errors occur and logs off. However I only use 1 player. lol.

You probably lost connection. Also, it doesn't take that long to logout if the random isn't detected. There's no need to watch it the whole time. :p You may as well just play legit if you're going to do that.

From: Nava2
Coh3n, when it switches for loads, you should *probably* add some randomness to that.. logging in to every player doing X loads every time isn't really a great plan.

Do something like
if ((LoadsCompleted mod LoadsToDo) = (RandomRange(0, 2))) then newplayerstuff;

Yeah, not sure why I didn't do that to begin with. I'll add that for the next version.

From: twobac
Coh3n,

since the camera motion was added to the script I get funny movements of my screen (IE8) like how spart described. also noticed that the camera angle change affected the wrong RS window, should have moved smart window, but moved the RS client window??

I like the idea of the random loads idea.

I'm not sure which funny movements you're referring to? Also, I have no idea why it would affect the wrong RS window. Try dragging the crosshairs on the SMART window before you start the script. See if that makes a difference.

fieri3xjohn

2010-03-14 05:45:54

omg, a mod went on, and was near me… T_T….. it said MOD FOUND ********************** and went to log out!!

Sgt Soul

2010-03-14 05:56:24

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank!
[============================ Rev.36 =============================]
[
[ You have chosen to cut Willow trees.
[
[ Ran For: 5 Hours, 35 Minutes and 11 Seconds
[ Loads Done: 100
[ Logs Chopped: 2799
[ Levels Gained: 0
[ Exp Gained: 188932
[ Breaks: 4
[
[================================================================]
[=================================================================][/PHP]

Works totally awesome, would give feedback but there is nothing to say other than 100% flawless from what ive seen :)

EDIT: btw I didn't watch too much of the script but if random hover skills isn't on there you should totally add it, for necessary skills like wcing of course :P just to make it more randomness and a stronger anti-ban :)

-Sgt Soul-

spart300

2010-03-14 08:39:26

Lol my guy logged out too yesterday cause a mod was next to him. I started laughing. And yeah Coh3n I play legit sometimes and then use this script. Today I think I'm gonna do half and half. For the most part I leave it unnattended but I jus hate seeing it get stuck in randoms. I don't know what Two is refferring to either though..I use SMART not IE8.

Coh3n

2010-03-14 11:58:06

From: sgt soul

Works totally awesome, would give feedback but there is nothing to say other than 100% flawless from what ive seen :)

EDIT: btw I didn't watch too much of the script but if random hover skills isn't on there you should totally add it, for necessary skills like wcing of course :P just to make it more randomness and a stronger anti-ban :)

-Sgt Soul-

Thanks! And it does have a hover skill. It'll will hover a random skill, or the WCing skill. :)

From: spart300
Lol my guy logged out too yesterday cause a mod was next to him. I started laughing. And yeah Coh3n I play legit sometimes and then use this script. Today I think I'm gonna do half and half. For the most part I leave it unnattended but I jus hate seeing it get stuck in randoms. I don't know what Two is refferring to either though..I use SMART not IE8.

Alright. I just wouldn't advise using IE8 for autoing. Firefox works the best if you ever decide not to use SMART.

twobac

2010-03-14 20:41:53

I use smart for this script and i play on RS client. had both running and the camera angle moved on the client, but the script was choppin on smart. then i opened ie8 to read forum and as i was writing, the cursor kept moving on its own.

Coh3n

2010-03-14 21:23:09

From: twobac
I use smart for this script and i play on RS client. had both running and the camera angle moved on the client, but the script was choppin on smart. then i opened ie8 to read forum and as i was writing, the cursor kept moving on its own.

[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 1 Hours, 54 Minutes and 53 Seconds ]
[ Loads Done: 34 ]
[ Logs Chopped: 952 ]
[ Levels Gained: 0 ]
[ Exp Gained: 64260 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[=================================================================][/PHP]

Stopped when i went to restore the smart screen to see how it was doing :S wanted to go for a better proggie than last time :P

Coh3n

2010-03-16 13:42:37

From: sgt soul
Stopped when i went to restore the smart screen to see how it was doing :S wanted to go for a better proggie than last time :P

Yeah, you should try to avoid minimizing the SMART client as much as possible. Minimizing and restoring it seem to cause a lot of issues.

Sgt Soul

2010-03-16 16:06:28

SMART choice haha,

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 3 Hours, 23 Minutes and 31 Seconds ]
[ Loads Done: 65 ]
[ Logs Chopped: 1820 ]
[ Levels Gained: 0 ]
[ Exp Gained: 122850 ]
[ Breaks: 1 ]
[ ]
[=================================================================][/PHP]
and

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 2 Hours, 57 Seconds ]
[ Loads Done: 41 ]
[ Logs Chopped: 1124 ]
[ Levels Gained: 0 ]
[ Exp Gained: 75870 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[=================================================================][/PHP]

one issue, after the update. Everytime it goes to log back on after a break it does this.

Break over, logging back in…
Welcome to Runescape.
*******
One minute has passed…
NextPlayer
SwitchToPlayer(PlayerNo: 0, Active: False);
Player is not Active…
All players not active!
Current Woodcutting level: -1
-> Setup_Player: You need at least 30 in Woodcutting to cut Willow trees
-> Next_Player: All players inactive, terminating script…

Coh3n

2010-03-16 21:20:23

Post your reports in PHP tags. Looks nicer. ;)

Did the player not log back in? I'll take a look at it now.

E: I don't see a reason why it wouldn't log back in. :confused:

twobac

2010-03-16 21:54:23

[QUOTE=sgt soul;694664
…
…

Stopped when i went to restore the smart screen to see how it was doing :S wanted to go for a better proggie than last time :P

Try this link for a fix
http://villavu.com/forum/showthread.php?t=47826

I used it and set it to 1024, smart ok but set too high for rs client, now set to 512 and all is well with both :)

Sgt Soul

2010-03-17 01:20:51

From: Coh3n
Post your reports in PHP tags. Looks nicer. ;)

Did the player not log back in? I'll take a look at it now.

E: I don't see a reason why it wouldn't log back in. :confused:

Well I don't see why it is doing it either, when it logs back on after a break it cant find the woodutting level, I could try to remove the minimum level requirement in the script to fix it i guess. I'll re dl it later on and see if that fixes the problem. Will get back to you (it did it again today)

-Sgt Soul-

Coh3n

2010-03-17 11:01:03

From: sgt soul
Well I don't see why it is doing it either, when it logs back on after a break it cant find the woodutting level, I could try to remove the minimum level requirement in the script to fix it i guess. I'll re dl it later on and see if that fixes the problem. Will get back to you (it did it again today)

-Sgt Soul-

Alright, so it is logging back in, it just misreads the woodcutting level? I may have to delete the level check when setting up the player.

Does anyone else get this error?

Sgt Soul

2010-03-17 11:28:43

It doesn't really bother me haha, I only need 1.1mil exp now till 99 and im giving the char a break so there is low chance of ban haha :P Decided to start a new char with the power cutter of yours :)

Coh3n

2010-03-17 12:02:51

From: sgt soul
It doesn't really bother me haha, I only need 1.1mil exp now till 99 and im giving the char a break so there is low chance of ban haha :P Decided to start a new char with the power cutter of yours :)

Haha alright. What level did you start using the script at?

mysterious123

2010-03-17 15:35:39

Thanks to your script my pure skiller will soon have lvl 90 WC.
(I used your scripts (Powercutter and Willow banker) since it was lvl 1 a few weeks ago.
=D

Coh3n

2010-03-17 15:39:23

From: mysterious123
Thanks to your script my pure skiller will soon have lvl 90 WC.
(I used your scripts (Powercutter and Willow banker) since it was lvl 1 a few weeks ago.
=D

Wow, very nice! :D

Sgt Soul

2010-03-17 23:55:41

From: Coh3n
Haha alright. What level did you start using the script at?

about 90, back in the day.
But since ive came back, from 96 i started it. so 2 lvls :P and the exp is in my sig :)

Coh3n

2010-03-18 02:15:14

From: sgt soul
about 90, back in the day.
But since ive came back, from 96 i started it. so 2 lvls :P and the exp is in my sig :)

A lot of people seem to be using this script A LOT, has anyone gotten banned? I'm just curious. Lol

Sgt Soul

2010-03-18 02:34:37

From: Coh3n
A lot of people seem to be using this script A LOT, has anyone gotten banned? I'm just curious. Lol

Not yet, haha. im sure anything below 10 hours and your account will be fine. I did 43 hours single player non stop at tzhaar fight pits and only got .5 black marks, as well as probably another 300+ hours using 10 hours a day. So this script would be 99.9% ban proof from what I believe :)

Coh3n

2010-03-18 02:57:58

From: sgt soul
Not yet, haha. im sure anything below 10 hours and your account will be fine. I did 43 hours single player non stop at tzhaar fight pits and only got .5 black marks, as well as probably another 300+ hours using 10 hours a day. So this script would be 99.9% ban proof from what I believe :)

Good to know. :p

Sgt Soul

2010-03-18 08:05:13

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ Ran For: 1 Hours, 53 Minutes and 29 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ ### F 31 837 3 56498 0 ]
[ ### F 0 0 0 0 0 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 31 837 3 56498 0 ]
[ ]
[=================================================================]
[=================================================================][/PHP]
sandwich lady PHAIL :P

Coh3n

2010-03-18 11:40:32

Too bad. Post your proggys in PHP tabs. ;) Looks way nicer.

Frement

2010-03-18 11:44:18

From 1-60+ on several characters and no bans. Used like 3-4h / day with each character.

Your powerchopper till lvl 35 and then this.

Sgt Soul

2010-03-19 19:44:18

From: Coh3n
Too bad. Post your proggys in PHP tabs. ;) Looks way nicer.

Made it look way nicer for you, I should be getting my character back on the script now, just to finish him to lvl 99 :)

Proggie:

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ Ran For: 3 Hours, 8 Minutes and 17 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ …. F 56 1512 4 102060 0 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 56 1512 4 102060 0 ]
[ ]
[=================================================================]
[=================================================================][/PHP]

Went very smooth :)

Coh3n

2010-03-20 12:22:09

Very nice, but how come it's going a multiplayer proggy when you only have one player?

Sgt Soul

2010-03-20 19:54:54

From: Coh3n
Very nice, but how come it's going a multiplayer proggy when you only have one player?

Oh, it is because I have three players saved, so even if I select not active on the two im not using it counts them as false but still counts them within the proggy.

-Sgt Soul-

Coh3n

2010-03-20 23:06:18

From: sgt soul
Oh, it is because I have three players saved, so even if I select not active on the two im not using it counts them as false but still counts them within the proggy.

-Sgt Soul-

Oh okay. :)

fieri3xjohn

2010-03-21 02:03:05

Why does the program keep on opening up the JAGEX password thing? It does so after a random event log out for like an hour.

Mrbanana

2010-03-21 03:08:06

Hey. sat in bank for awhile then

HTTP/1.1 503 Service Temporarily Unavailable
HTTP/1.1 503 Service Temporarily Unavailable

EDIT:
Was just about to have a shower then it said the below and started typing my user into report abuse thingo D:

Yay 80 WC!

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ Ran For: 4 Hours, 24 Minutes and 44 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ *** F 0 0 0 0 0 ]
[ *** T 74 1997 1 134798 0 ]
[ *** F 0 0 0 0 0 ]
[ *** F 0 0 0 0 0 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 74 1997 1 134798 0 ]
[ ]
[=================================================================][/PHP]

Sgt Soul

2010-03-21 05:29:09

ohhh, Mrbanana your windows skin is AWESOME!!!,
here is my progster! :)

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ Ran For: 3 Hours, 14 Minutes and 42 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ ### F 0 0 0 0 0 ]
[ ### F 0 0 0 0 0 ]
[ ### F 63 1701 2 114818 0 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 63 1701 2 114818 0 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

Coh3n

2010-03-21 09:45:54

From: fieri3xjohn
Why does the program keep on opening up the JAGEX password thing? It does so after a random event log out for like an hour.

I don't know. I've had that happen to me when running other scripts. There may be a bug in SRL…

@Mrbanana: Sometimes SRL thinks it's loggout out when it's really not, so that could explain why it tried to type in your username. As for opening the report box, I have NO idea why that happened. There may be a similar color to the Report Abuse button in the login screen.

nomnom

2010-03-21 17:22:31

Im really looking forward to trying this out it sounds awsome :D

Coh3n

2010-03-21 19:11:33

From: nomnom
Im really looking forward to trying this out it sounds awsome :D

Are you actually going to try it out? Because you also posted on my Powerchopper thread without a progress report or proof of usage.

mysterious123

2010-03-22 03:25:58

From: Coh3n
Are you actually going to try it out? Because you also posted on my Powerchopper thread without a progress report or proof of usage.

People trying to get their 10th post….
Anyways - Was the "Yew cutter" you said was a secret still getting scripted?

In other news: I'm going to have a break from this script for a short while.
My char's wc is like more than 90 thanks to this script so I'm going to powerlvl other skills as well. Hopefully I'll find such a great maintained script for other skills as well.

Coh3n

2010-03-22 10:55:16

From: mysterious123
People trying to get their 10th post….
Anyways - Was the "Yew cutter" you said was a secret still getting scripted?

In other news: I'm going to have a break from this script for a short while.
My char's wc is like more than 90 thanks to this script so I'm going to powerlvl other skills as well. Hopefully I'll find such a great maintained script for other skills as well.

Yeah, except it doesn't matter if you get 10 posts or not. The only way to become a Jr. Member is to be a member of the forums for 6 months. The Jr. Members no longer see their own script section as it is available to everyone.

And that yew cutter… I heard someone was working on one. I also heard it was going pretty well. That's all I'm going to say.

twobac

2010-03-22 12:54:08

lol

ampedup

2010-03-22 13:40:28

I get this error

Line 685: [Error] (24829:1): Unknown identifier 'ExitToLobby' in script C:\Program Files\SCAR 3.23 Beta\Scripts\DCNB\Draynor Chop N' Bank [RUN ME].scar

Coh3n

2010-03-22 13:51:32

From: ampedup
I get this error

Line 685: [Error] (24829:1): Unknown identifier 'ExitToLobby' in script C:\Program Files\SCAR 3.23 Beta\Scripts\DCNB\Draynor Chop N' Bank [RUN ME].scar

You don't have the latest version of SRL.

Sgt Soul

2010-03-22 16:21:54

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ Ran For: 5 Hours, 30 Minutes and 20 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ d… F 0 0 0 0 0 ]
[ t… F 0 0 0 0 0 ]
[ s.. F 107 2885 2 194738 0 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 107 2885 2 194738 0 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

Pretty good single player run i reckon :)

Coh3n

2010-03-22 16:48:58

Yeah I'd say. :p

Once I get more time, I plan on making a lot of updates to this (mainly a more detailed proggy). I want to make the debugging better, and add a few more features. This is all within the next month or more, but just letting you guys know that I do plan on making it a lot better. :)

Sgt Soul

2010-03-23 07:05:17

From: Coh3n
Yeah I'd say. :p

Once I get more time, I plan on making a lot of updates to this (mainly a more detailed proggy). I want to make the debugging better, and add a few more features. This is all within the next month or more, but just letting you guys know that I do plan on making it a lot better. :)

sounds great, if you would like me to test when update is in beta stage just pm me :) I'll give you the best detailed report I can do for you :)

-Sgt Soul-

Coh3n

2010-03-23 11:53:13

From: sgt soul
sounds great, if you would like me to test when update is in beta stage just pm me :) I'll give you the best detailed report I can do for you :)

-Sgt Soul-

Okay, thanks. :)

mysterious123

2010-03-23 15:46:35

From: Coh3n
Okay, thanks. :)

What is there really to add? This script is like perfect.
Unless you add a feature which also burns the trees…

Coh3n

2010-03-23 22:21:04

From: mysterious123
What is there really to add? This script is like perfect.
Unless you add a feature which also burns the trees…

I doubt I'll add log burning, but it's a possibility. Most of the updates won't be to what the script does, but how it works. I plan to optimize speed and efficiency, and hopefully create a VERY detailed progress report.

What the script does really won't change at all.

easyas4

2010-03-24 08:31:37

I ran your script over night and i thought it was working fine but it seemed to mess up when it tried to take a break and switch players. im not sure what happened because i wasn't there watching it, but it said switching to player no. 1 active: false or somthing similar. then it tried to log it in anyways and had more problems. it then tried to switch to the next character then said all players not active terminating script. but idk why because all of them are set to active. sorry i dont have the debug, ill get another one later if it happens again. also when i checked on it this morning i had 8 email registration pages up and one more in a another window. Scary.

-Easy

mysterious123

2010-03-24 08:39:40

From: easyas4
I ran your script over night and i thought it was working fine but it seemed to mess up when it tried to take a break and switch players. im not sure what happened because i wasn't there watching it, but it said switching to player no. 1 active: false or somthing similar. then it tried to log it in anyways and had more problems. it then tried to switch to the next character then said all players not active terminating script. but idk why because all of them are set to active. sorry i dont have the debug, ill get another one later if it happens again. also when i checked on it this morning i had 8 email registration pages up and one more in a another window. Scary.

-Easy

About the email registeration thing, everyone gets it… I mean I got it like 50% of the times I ran this script.

Sgt Soul

2010-03-24 10:03:01

main thing is it doesn't pick up your wcing lvl and it screws itself :P

[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ Ran For: 5 Hours, 37 Minutes and 11 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ d… F 0 0 0 0 0 ]
[ t… F 120 3360 0 226800 4 ]
[ s.. F 0 0 0 0 0 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 120 3360 0 226800 4 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP]

Good single player progster :)

Coh3n

2010-03-24 10:36:28

From: mysterious123
About the email registeration thing, everyone gets it… I mean I got it like 50% of the times I ran this script.

I think that may have something to do with the LobbyScreen, and logging back in. If I can't figure out what's wrong, I'll just make the player fully logout instead of just exit to the lobby.

From: sgt soul
main thing is it doesn't pick up your wcing lvl and it screws itself :P

Yeah, that bugs me too. I think I may take that part out. I'll still have it keep track of the levels gained and such, but I won't have it logout if the level is too low to cut the tree. I'm just going to assume that when you use the script, your player has a high enough level. :)

mysterious123

2010-03-24 10:43:33

From: Coh3n
I think that may have something to do with the LobbyScreen, and logging back in. If I can't figure out what's wrong, I'll just make the player fully logout instead of just exit to the lobby.

Yeah, that bugs me too. I think I may take that part out. I'll still have it keep track of the levels gained and such, but I won't have it logout if the level is too low to cut the tree. I'm just going to assume that when you use the script, your player has a high enough level. :)

I think it has to do with the fact it doesn't know that it's in the lobby screen and continues working. Or in the lobby the tree color is like the button it's clicking?

Coh3n

2010-03-24 10:51:09

From: mysterious123
I think it has to do with the fact it doesn't know that it's in the lobby screen and continues working. Or in the lobby the tree color is like the button it's clicking?

Yeah, well I have it click the "Click here to play" button, so there isn't even any colors involved. But if it were to click in the wrong area, it would think that it has logged back in. Therefore, causing it to continue with the script. I'll have to take a better look at it later, but hopefully I'll have an update for you guys later today. :)

E: I've noticed that there aren't nearly as many people using this script to cut Oak trees as there used to be. Is there a particular reason for that? I'm just wondering. There may be something I need to improve on.

easyas4

2010-03-24 13:34:42

so i ran it again for about four hours this time. its self executed.
i found one of my characters in a random, the jail one where you have to click the swinging keys,

another one who was chosen to cut oaks instead of willows, who hadnt cut anything,

another who was also chosen to cut oaks who was in the axe shop in lumby with a full inventory of oaks

another who was supposed to be cutting willows who was in lumby, he had 0 willows cut,

another who was cutting willows who seemed to work well but did 2 less loads than it was supposed to.

and my last character never got to run. it executed before he got to log in.

[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ Ran For: 4 Hours, 1 Minutes and 27 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ ames F 0 0 0 0 0 ]
[ insc F 0 0 29 0 0 ]
[ udki F 0 0 27 0 0 ]
[ arel T 0 0 0 0 0 ]
[ udki T 13 351 9 23692 0 ]
[ olya T 0 0 0 0 0 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 13 351 65 23692 0 ]
[ ]
[=================================================================]
[=================================================================]

am i the only one who its messing up for?

Coh3n

2010-03-24 14:36:54

Well the ones that ended up in lumby died. You should build up their combat if you want to cut Oaks. Even when cutting willows if you can't have a character that's below level 20 or something.

I need a better explanation than "it self executed" because that makes no sense. It doesn't just stop for no reason at all. What did the debug box say?

And yes, you do seem to be the only person having a problem with this script. :p

ampedup

2010-03-24 15:05:10

From: Coh3n
You don't have the latest version of SRL.

good thing i just redid my entire scar folder and got things working.

Coh3n

2010-03-24 15:06:29

From: ampedup
good thing i just redid my entire scar folder and got things working.

:) Reinstalling everything seems to fix everyone's problems.

E: Fixed a few things, please update to Rev. 37.

easyas4

2010-03-24 16:35:54

haha i was going to get them all to around level 20 cb but it takes too long because i cant find a chicken killer i have access to that works well and im too lazy to get them there manually. so ill just get the characters all to willow cutting level i guess. ill post a proggie when i decide to go back to wc training.

elite_h4x

2010-03-25 08:10:34

im tryin to use this script using SMART but whenever i try run it it opens up options then graphic settings clicks standard detail (from safe mode)then screen flashes like hell and it spam clicks full screen mode and i get a thousand msgs saying im not a member

any help would b appreicated:duh:

i luffs yeww

2010-03-25 08:22:57

Elite, that's a problem with SRL, I think. I'd suggest running it, letting SMART open (not load), then ending the script (but don't close SCAR), then press the Disable SMART button in the bottom left corner and log in yourself. Then once you're all logged in, press Enable SMART, minimize SMART, and start the script. And don't open up SMART during runtime. Just let it do what it has to do. ;)

pur3 cutt1n

2010-03-25 10:43:37

Not sure if this has happened to anyone else, but i left mine on for 2 runs and after getting a full inventory for the second time, it went to the bank as expected, yet couldnt seem to find the bank booths themselves. It attempted to alternate between 3 booths of the same colour, yet there not bank booths.

Found bank symbol! Relocating...
-> Bank_Logs: Failed to find bank screen.
-> Bank_Logs: Failed to open bank, retrying...

EDIT: Also, the SMART screen finished itself after logging me in, yet worked the second time. The only difference was the time limit I had to wait after changing to another world so perhaps theres a way to compensate for a potential time limit?

Coh3n

2010-03-25 12:19:14

From: elite_h4x
im tryin to use this script using SMART but whenever i try run it it opens up options then graphic settings clicks standard detail (from safe mode)then screen flashes like hell and it spam clicks full screen mode and i get a thousand msgs saying im not a member

any help would b appreicated:duh:

SRL isn't suppose to do that. Make sure you have latest Dev SRL.

From: pur3 cutt1n
Not sure if this has happened to anyone else, but i left mine on for 2 runs and after getting a full inventory for the second time, it went to the bank as expected, yet couldnt seem to find the bank booths themselves. It attempted to alternate between 3 booths of the same colour, yet there not bank booths.
Found bank symbol! Relocating...
-> Bank_Logs: Failed to find bank screen.
-> Bank_Logs: Failed to open bank, retrying...
EDIT: Also, the SMART screen finished itself after logging me in, yet worked the second time. The only difference was the time limit I had to wait after changing to another world so perhaps theres a way to compensate for a potential time limit?

Did it eventually open the bank?

And what do you mean "the SMART screen finished itself"?

pur3 cutt1n

2010-03-25 14:35:26

From: Coh3n
SRL isn't suppose to do that. Make sure you have latest Dev SRL.

Did it eventually open the bank?

And what do you mean "the SMART screen finished itself"?

Sorry, i should have been more specific. I meant that after I started the screen (after waiting for the world change time) the script "successfully executed" instead of beginning to chop wood.

(It did check my invent and stats first before logging out if that helps).

Whether it eventually did depended on the location it would take me to. sometimes it would get stuck, search around 5 times roughly and then click the mini map again. Other times it would simply search between 3 and never re-adjust.

Thanks for the quick reply!

Coh3n

2010-03-25 14:37:26

From: pur3 cutt1n
Sorry, i should have been more specific. I meant that after I started the screen (after waiting for the world change time) the script "successfully executed" instead of beginning to chop wood.

(It did check my invent and stats first before logging out if that helps).

Whether it eventually did depended on the location it would take me to. sometimes it would get stuck, search around 5 times roughly and then click the mini map again. Other times it would simply search between 3 and never re-adjust.

Thanks for the quick reply!

No problem. :)

What did the debug box say after it checked your inventory/stats the logged out?

pur3 cutt1n

2010-03-25 14:50:12

From: Coh3n
No problem. :)

What did the debug box say after it checked your inventory/stats the logged out?

Not sure. I'm pretty new to this and i'm not sure if I can salvage that data now, it happened last night.

However, I can try to re-create the conditions and see if the same happens?

Is the debug box the data underneath the script?

Apologies for my noobness :duh:

Coh3n

2010-03-25 14:57:38

From: pur3 cutt1n
Not sure. I'm pretty new to this and i'm not sure if I can salvage that data now, it happened last night.

However, I can try to re-create the conditions and see if the same happens?

Is the debug box the data underneath the script?

Apologies for my noobness :duh:

No need to apologize, and yes, it is. :)

It may have logged out because it didn't find you hatchet. This often happens when users don't setup the player right in the DeclarePlayers (or player form). You have to make sure you set the Hatchet status correctly so it will search the proper game tab for the hatchet.

pur3 cutt1n

2010-03-25 15:17:02

From: Coh3n
No need to apologize, and yes, it is. :)

It may have logged out because it didn't find you hatchet. This often happens when users don't setup the player right in the DeclarePlayers (or player form). You have to make sure you set the Hatchet status correctly so it will search the proper game tab for the hatchet.

Right, i'll try and simulate the situation again and give you a heads up when I get the chance. :)

Coh3n

2010-03-25 15:26:59

From: pur3 cutt1n
Right, i'll try and simulate the situation again and give you a heads up when I get the chance. :)

Okay, thanks. :)

Sgt Soul

2010-03-25 16:41:06

[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ Ran For: 8 Hours, 10 Minutes and 57 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ d… F 0 0 0 0 0 ]
[ t… T 176 4846 1 327105 0 ]
[ s.. F 0 0 0 0 0 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 176 4846 1 327105 0 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP] The single player proggy that got me lvl 99 wcing :)
thx a lot hehe

-Sgt Soul-

twobac

2010-03-25 20:24:54

omg was that 8 hours without any breaks??

Just watched the Quiz random getting solved, that was so cool!

Coh3n, thought you might want to amend the BoxRewards in DeclarePlayers to include the XP Book of Knowledge (not sure if that was the exact name), I manually solved the random, but the script choose 112gp instead of the XP.

If anyone wanted to do this would the following work?
[php] BoxRewards := ['ostume', 'amp', 'ook', 'ledge', 'mote', 'oins', 'unes', 're', 'ems'];[/php]

:D

Coh3n

2010-03-25 23:09:29

From: sgt soul
[PHP]
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.36 =============================]
[ ]
[ Ran For: 8 Hours, 10 Minutes and 57 Seconds ]
[ ]
[ Nick T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ d… F 0 0 0 0 0 ]
[ t… T 176 4846 1 327105 0 ]
[ s.. F 0 0 0 0 0 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 176 4846 1 327105 0 ]
[ ]
[=================================================================]
[=================================================================]
[/PHP] The single player proggy that got me lvl 99 wcing :)
thx a lot hehe

-Sgt Soul-

Congrats! I think you're the second person that I know of that's gotten 99 wcing using this script. :D

From: twobac
omg was that 8 hours without any breaks??

Just watched the Quiz random getting solved, that was so cool!

Coh3n, thought you might want to amend the BoxRewards in DeclarePlayers to include the XP Book of Knowledge (not sure if that was the exact name), I manually solved the random, but the script choose 112gp instead of the XP.

If anyone wanted to do this would the following work?
[php] BoxRewards := ['ostume', 'amp', 'ook', 'ledge', 'mote', 'oins', 'unes', 're', 'ems'];[/php]

:D

I have no idea if that would work or not. I can't even remember where I got the current box reward strings from. :o

twobac

2010-03-25 23:11:11

ok i will try and see :)

Sgt Soul

2010-03-25 23:42:41

From: twobac
omg was that 8 hours without any breaks??

Yes it was, quite a bit of experience I reckon from it :) have put breaks in every other training just forgot to add before i went to sleep haha. oh wells :P

twobac

2010-03-26 10:46:36

New proggy for ver 37. I have amended the declare players procedure to hold a new string [php]Strings[Alias] := 'WC01'; // Used in Progress Report.[/php]
and amended the report to show this instead of the nick. Hope you dont mind Coh3n, it just saves me time when i post the proggy.

10 hours no manual intervention from me, wc 4..6 & 11 all not equiped with axe, the others I dont know about yet, will investigate later.

[php]-> Next_Player: All players inactive, terminating script…
[=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.37 =============================]
[ ]
[ Ran For: 10 Hours, 3 Minutes and 23 Seconds ]
[ ]
[ Alias T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ WC01 F 16 448 0 30240 3 ]
[ WC02 F 18 504 0 34020 4 ]
[ WC03 F 4 112 0 7560 0 ]
[ WC04 F 0 0 0 0 0 ]
[ WC05 F 0 0 0 0 0 ]
[ WC06 F 0 0 0 0 0 ]
[ WC07 F 18 504 7 34020 3 ]
[ WC08 F 11 308 1 20790 3 ]
[ WC09 F 18 503 1 33952 4 ]
[ WC10 F 4 112 1 7560 1 ]
[ WC11 F 0 0 0 0 0 ]
[ WC12 F 18 504 63 34020 3 ]
[ WC13 F 36 1008 64 68040 9 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 143 4003 137 270202 30 ]
[ ]
[=================================================================]
[=================================================================]
[/php]

also i found a prob with the log on procedure when the user (i.e. me) tries to run too many scripts at the same time. same player wc01 was testing one of my scripts when he tried to chop logs at the same time, lol. Should I post this in the bugs section?? (not really a bug more of an enhanchm,ent request as there is no failsafe for this).

Cheers
2bac

Coh3n

2010-03-26 11:26:56

Yeah I don't mind, do whatever you want. :p

You should post about that in the suggestions section of the Public SVN. I'm not sure if we have handling for those kind of errors. I'm pretty sure a similar window pops up if it can't connect.

The players that didn't have hatchets equipped… did the script log them out and set them to false because a hatchet wasn't found?

pur3 cutt1n

2010-03-26 13:36:26

Sorry to be back here again, the script is working great, yet today when I tryed to log onto it, it initialised S.M.A.R.T. but everytime the runescape window gets to "starting 3D library", it flashes frequently and the script seems to wait without producing any errors in the debug box.

Just wondering if its an issue with SMART or the script itself?

Thanks again!

i luffs yeww

2010-03-26 13:37:38

It's neither. :) Go to runescape.com/game.ws?j=1, then make sure everything is on lowest settings, safe mode, fixed client. Then retry. Should work now.

pur3 cutt1n

2010-03-26 14:06:38

From: i luffs yeww
It's neither. :) Go to runescape.com/game.ws?j=1, then make sure everything is on lowest settings, safe mode, fixed client. Then retry. Should work now.

Working fine now, thankyou very much!

EDIT: Also the issue with the script not working because of a time wait seems to have been a one off (probably due to human error lol).

Thanks again for making an awesome script Coh3n!

Coh3n

2010-03-26 16:02:06

From: pur3 cutt1n
Working fine now, thankyou very much!

EDIT: Also the issue with the script not working because of a time wait seems to have been a one off (probably due to human error lol).

Thanks again for making an awesome script Coh3n!

No problem. :)

toro45

2010-03-26 19:05:31

[PHP][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.37 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 1 Hours, 20 Minutes and 20 Seconds ]
[ Loads Done: 20 ]
[ Logs Chopped: 559 ]
[ Levels Gained: 0 ]
[ Exp Gained: 37732 ]
[ Breaks: 1 ]
[ ]
[=================================================================]
[=================================================================][/PHP]

Just did a test run, although it couldn't find the bank so it terminated before i wanted it to :(

Other than that, awesome script

easyas4

2010-03-27 14:09:31

[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.37 =============================]
[                                                                 ]
[     Ran For: 8 Hours, 13 Minutes and 23 Seconds                 ]
[                                                                 ]
[     Nick    T/F    Loads     Logs     Lvls     Exp.     Brks    ]
[     ¯¯¯¯    ¯¯¯    ¯¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯    ]
[     ames     F      15       405       3      27338      1      ]
[     insc     F      26       702       14     47385      1      ]
[     udki     F      8        216       6      14580      0      ]
[     arel     F      15       405       10     27338      1      ]
[     udki     F      1        27        1      1822       0      ]
[     olya     F      8        216       7      14580      0      ]
[     ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯    ]
[     Totals:         73       1971      41     133043     3      ]
[                                                                 ]
[=================================================================]
[=================================================================]

i had some characters that didnt do the mime, arnav, niles, quiz master, and pinball randoms. thats five out of my six characters had and failed the randoms. is that just the script or did something else happen?

twobac

2010-03-27 15:24:31

New proggy - Have not checked the levels gained yet up update later. All players were set to chop 500 logs, nb last player??? not sure what happened there? all others seam to have terminated around the correct time. :)

[php][=================================================================]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.37 =============================]
[ ]
[ Ran For: 16 Hours, 54 Minutes and 14 Seconds ]
[ ]
[ Alias T/F Loads Logs Lvls Exp. Brks ]
[ ¯¯¯¯ ¯¯¯ ¯¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ]
[ WC01 F 18 504 1 34020 4 ]
[ WC02 F 18 504 2 34020 4 ]
[ WC03 F 18 504 1 34020 3 ]
[ WC04 F 18 504 0 34020 4 ]
[ WC05 F 18 504 1 34020 4 ]
[ WC06 F 18 504 0 34020 3 ]
[ WC07 F 15 420 0 28350 3 ]
[ WC08 F 17 476 0 32130 4 ]
[ WC09 F 18 504 0 34020 4 ]
[ WC10 F 18 504 1 34020 4 ]
[ WC11 F 19 513 1 34628 4 ]
[ WC12 F 18 504 2 34020 5 ]
[ WC13 F 36 1008 1 68040 8 ]
[ ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ]
[ Totals: 249 6953 10 469328 54 ]
[ ]
[=================================================================]
[=================================================================]
Successfully executed
[/php]

Coh3n

2010-03-27 15:50:36

From: toro45
Just did a test run, although it couldn't find the bank so it terminated before i wanted it to :(

Other than that, awesome script

Hmm, you aren't the first person to say that. Maybe I need to improve the bank finding.

From: easyas4
i had some characters that didnt do the mime, arnav, niles, quiz master, and pinball randoms. thats five out of my six characters had and failed the randoms. is that just the script or did something else happen?

The randoms solving is in SRL, not my script.

From: twobac
New proggy - Have not checked the levels gained yet up update later. All players were set to chop 500 logs, nb last player??? not sure what happened there? all others seam to have terminated around the correct time. :)

Awesome report! And yeah, I'm not sure what happened to the last player. You're sure you set it to only do 500 logs?

twobac

2010-03-27 22:41:19

oops my bad, just checked the script, last was set to 1000! :)

Coh3n

2010-03-29 14:04:55

From: twobac
oops my bad, just checked the script, last was set to 1000! :)

:p Still sweet to see that it actually chopped them all without messing up. :)

kevinconklin

2010-03-30 07:23:18

great script heres my proggy!!:

[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.37 =============================]
[                                                                 ]
[      You have chosen to cut Willow trees.                       ]
[                                                                 ]
[      Ran For: 5 Hours, 7 Minutes and 18 Seconds                 ]
[      Loads Done: 114                                            ]
[      Logs Chopped: 3190                                         ]
[      Levels Gained: 1                                           ]
[      Exp Gained: 215325                                         ]
[      Breaks: 0                                                  ]
[                                                                 ]
[=================================================================]
[=================================================================]

stop by random, but it still ran for 5 hours, keep up the good work :P

Coh3n

2010-03-30 11:33:39

That's awesome! It's not very often you get a single player to run for that long without getting a random. :)

Thanks for using!

kevinconklin

2010-03-30 15:26:12

From: Coh3n
That's awesome! It's not very often you get a single player to run for that long without getting a random. :)

Thanks for using!

thanks for making it!!!

godspower55

2010-03-30 21:04:12

i keep getting this
Include file C:\Users\owner\Desktop\New Folder (2)\includes\DCnB_Form.scar does not exist.
Failed when compiling

i downloaded the script, i have it in a different folder than the scar

Frement

2010-03-30 21:07:42

From: godspower55
i keep getting this
Include file C:\Users\owner\Desktop\New Folder (2)\includes\DCnB_Form.scar does not exist.
Failed when compiling

i downloaded the script, i have it in a different folder than the scar

You downloaded it, as in "Right click .. save as"? If so, you have to checkout a folder to: http://dcnb.googlecode.com/svn/trunk/

godspower55

2010-03-30 21:09:20

if this is what you mean, i made a new folder on my desktop and did checkout with that link

Frement

2010-03-30 21:11:59

From: godspower55
if this is what you mean, i made a new folder on my desktop and did checkout with that link

Well, all i can really suggest is that you either delete the contents of the folder and update, or you create a new folder and checkout again.

It worked perfectly to me.

godspower55

2010-03-30 21:12:53

am i suppose to move the contents of the folder to the srl folder or do i leave it there? cuz i retried this like 5 times

Edit i got it working.. ty for your help though.

Coh3n

2010-03-30 21:34:17

From: godspower55
am i suppose to move the contents of the folder to the srl folder or do i leave it there? cuz i retried this like 5 times

Edit i got it working.. ty for your help though.

Yeah, you should just be able to checkout form that link and go. There's no need to move any files/folders.

fieri3xjohn

2010-03-31 05:49:33

Do you know why the script sometimes goes to the far end of the lake or like far away from the basnk?

Coh3n

2010-03-31 11:50:53

From: fieri3xjohn
Do you know why the script sometimes goes to the far end of the lake or like far away from the basnk?

pur3 cutt1n

2010-03-31 11:59:44

I'll look forward to it, looks good so far!

Coh3n

2010-03-31 12:03:03

From: pur3 cutt1n
I'll look forward to it, looks good so far!

Thanks, most have the changes have been to the organization etc. I also plan on making it more efficient, but when running the script, you shouldn't notice a difference. If you do, I guarantee it'll be something good. :p

E: Alright, here's another run, this time cutting Oaks. I basically rewrote the walking for the Oaks, and by the looks of things, it works much, much better. :) This one stopped because of an access violation in SCAR, so not the script's fault.
[PHP]
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 38 - |
|====================================================|
| |
| Program: SCAR |
| SMART: Yes |
| Ran For: 2 Hours, 20 Minutes and 12 Seconds |
| |
| Player: ************ |
| Active: True |
| Location: Bank |
| Tree Type: Oak |
| Loads Done: 41 |
| Logs Cut: 1,119 |
| Levels Up: 0 |
| Experience: 41,962 |
| Breaks: 2 |
|____________________________________________________|
|____________________________________________________/
[/PHP]
I think you guys are really going to like this new version. All that's left to do is redesign the multiplayer progress report. :)

Another feature I've been thinking of adding is the cutting of the Oak tree just east of the bank for lower level players. If enough people say they'll use it, I should be able to add it in pretty easily. Let me know if you'd use this feature.

pur3 cutt1n

2010-03-31 12:06:25

From: Coh3n
Thanks, most have the changes have been to the organization etc. I also plan on making it more efficient, but when running the script, you shouldn't notice a difference. If you do, I guarantee it'll be something good. :p

“When you do things right, people won’t be sure you’ve done anything at all.”

-Futurama

Coh3n

2010-03-31 23:15:57

From: pur3 cutt1n
“When you do things right, people won’t be sure you’ve done anything at all.”

-Futurama

Lol good call! :p

E: I have updated to revision 38. There are a TON of updates this time, I hope you like them. :)

Enjoy!

Brandom

2010-03-31 23:52:41

Must be doing something wrong? It loads up it clicks on one tree then it gives me that

-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Chop_Trees: Length boxesArr[1]): 19
-> DETAIL: Find_Randoms: Scanning for random events…

Coh3n

2010-03-31 23:53:56

From: Brandom
Must be doing something wrong? It loads up it clicks on one tree then it gives me that

-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Chop_Trees: Length boxesArr[1]): 19
-> DETAIL: Find_Randoms: Scanning for random events…

That's the script debugging? Does it not click another tree after that tree is down? I don't really see what you problem is… Lol

Rasta

2010-04-01 10:36:38

File Bitmaps\BGND.png was not found
[Runtime Error] : Out Of Range in line 1797

Just got this error while trying to run. Any ideas on how to fix it?

Coh3n

2010-04-01 13:28:24

From: Rasta
File Bitmaps\BGND.png was not found
[Runtime Error] : Out Of Range in line 1797

Just got this error while trying to run. Any ideas on how to fix it?

Make sure that when you download the script, you don't move any of the files. You DCnB folder should look like this:

And in the Bitmaps folder should be a whole bunch of picture files. If you're convinced you have all this, delete you DCnB folder and redownload.

twobac

2010-04-01 21:53:10

Nice, just downloaded rev 38. Like the progress report!

just a quick run
[php]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 1 |
| Lamps Solved : 1 |
| Molly's Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 38 - |
|=====================================================================================|
| |
| Ran For: 27 Minutes and 44 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC02 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC03 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC04 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC05 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC06 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC07 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC08 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC09 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC10 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC11 | True | Bank | 4 | Willow | 112 | 0 | 7,560 | 1 |
| WC12 | True | Bank | 2 | Willow | 56 | 0 | 3,780 | 0 |
| WC13 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
|————————————————————————————-|
| Totals: | 6 | | 168 | 0 | 11,340 | 1 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

In declare players is 'Nick' used by any random finding? or just for the report?

- Totals line is out by 1 char, lol
- what is the random variance used on the number of loads? I set it to do 3 loads, but one did 4 and the other did 2?

- Just watched the Molly being solved, awesome!

Coh3n

2010-04-01 22:31:14

From: twobac
Nice, just downloaded rev 38. Like the progress report!

just a quick run
[php]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 1 |
| Lamps Solved : 1 |
| Molly's Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 38 - |
|=====================================================================================|
| |
| Ran For: 27 Minutes and 44 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC02 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC03 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC04 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC05 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC06 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC07 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC08 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC09 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC10 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC11 | True | Bank | 4 | Willow | 112 | 0 | 7,560 | 1 |
| WC12 | True | Bank | 2 | Willow | 56 | 0 | 3,780 | 0 |
| WC13 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
|————————————————————————————-|
| Totals: | 6 | | 168 | 0 | 11,340 | 1 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

In declare players is 'Nick' used by any random finding? or just for the report?

- Totals line is out by 1 char, lol
- what is the random variance used on the number of loads? I set it to do 3 loads, but one did 4 and the other did 2?

- Just watched the Molly being solved, awesome!

Yes, the nick is used for random solving. It does the amount of loads set +/- 2 before switching. What do you mean the totals is out my one char? Like its not in line? Its suppose to be like that because it'll have larger numbers.

easyas4

2010-04-01 23:14:04

got a really good proggy.

[=================================================================]
[                 Coh3n's Draynor Chop N' Bank!                   ]
[============================ Rev.37 =============================]
[                                                                 ]
[     Ran For: 14 Hours, 33 Minutes and 15 Seconds                ]
[                                                                 ]
[     Nick    T/F    Loads     Logs     Lvls     Exp.     Brks    ]
[     ¯¯¯¯    ¯¯¯    ¯¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯     ¯¯¯¯    ]
[     ames     F      28       756       2      51030      2      ]
[     insc     T      28       756       5      51030      2      ]
[     udki     T      26       702       8      47385      2      ]
[     arel     T      22       594       7      40095      1      ]
[     udki     T      30       810       7      54675      2      ]
[     olya     T      20       540       8      36450      1      ]
[     ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯    ]
[     Totals:         154      4158      37     280665     10     ]
[                                                                 ]
[=================================================================]
[=================================================================]

sorry for the old version. i just recently got my computer back from getting a really nasty virus off of it. but yeah, ive been running it since this morning and was surprised to find it still running considering it usually lags out because i only have 1gb of RAM and it gets all laggy if it runs too long. but yeah, great script :) love you man ;) no homo

Coh3n

2010-04-01 23:43:08

From: easyas4
got a really good proggy.

sorry for the old version. i just recently got my computer back from getting a really nasty virus off of it. but yeah, ive been running it since this morning and was surprised to find it still running considering it usually lags out because i only have 1gb of RAM and it gets all laggy if it runs too long. but yeah, great script :) love you man ;) no homo

That is an awesome report! Don't worry about the old version, I just released the new one earlier to day. :p

twobac

2010-04-02 03:09:03

Hi Coh3n,

Thanks for answer to questions. Cool ok.

I have noticed that the players keep getting lost. some ending over by the docks in the Port or near the draynor dungeon north entrance (where the anvil is), whilst chopin willows.

Oak finding, chops a lot of normal trees about 20 percent per load. Also found my chars kept getitng killed by the guards, so ur thought about the other Oaks would be a good idea, it has my vote.

[php]/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 38 - |
|=====================================================================================|
| |
| Ran For: 2 Hours, 8 Minutes and 43 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC02 | False | Lost | 7 | Willow | 196 | 0 | 13,230 | 0 |
| WC03 | True | Willows | 5 | Willow | 140 | 0 | 9,450 | 0 |
| WC04 | False | Lost | 2 | Willow | 56 | 0 | 3,780 | 0 |
| WC05 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC06 | True | Willows | 1 | Willow | 28 | 1 | 1,890 | 0 |
| WC07 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC08 | True | Bank | 10 | Willow | 280 | 1 | 18,900 | 0 |
| WC09 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC10 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC11 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC12 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC13 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
|————————————————————————————-|
| Totals: | 25 | | 700 | 2 | 47,250 | 0 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

Coh3n

2010-04-02 10:30:43

From: twobac
Hi Coh3n,

Thanks for answer to questions. Cool ok.

I have noticed that the players keep getting lost. some ending over by the docks in the Port or near the draynor dungeon north entrance (where the anvil is), whilst chopin willows.

Oak finding, chops a lot of normal trees about 20 percent per load. Also found my chars kept getitng killed by the guards, so ur thought about the other Oaks would be a good idea, it has my vote.

See the second point in the Bugs part of the first post for the Normal logs issue. So your players ended up in northern Draynor and near Port Sarim while cutting Willows? I have absolutely no explanation for that. :confused:

I'll have to look at the script closer. I don't see why that would happen though considering the Willows walking doesn't even use colors.

twobac

2010-04-02 10:53:44

Problems started around approx 8hrs. I watched the following debug as it happened.

[php]
-> DETAIL: Chop_IsTreeDown: Tree has been cut down! // Last tree cut by player 10
-> DETAIL: Chop_Trees: Boxes Found: 5
-> DETAIL: Chop_Trees: Length boxesArr[0]): 188
-> DETAIL: Chop_Trees: Uptext found!
-> DETAIL: Chop_Trees: Track Point: (286, 133)
-> DETAIL: Chop_IsTreeDown: Length inside Box: 126
-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Chop_IsTreeDown: Length inside Box: 103
-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Find_Randoms: Scanning for random events…
-> SUCCESS: Walk_PerformIndex: Walked to location: Bank
-> SUCCESS: Walk_ToLoc: Walked to Bank //I think this is where it went wrong. I dont think it banked anything?
-> DETAIL: Find_Randoms: Scanning for random events…
-> SUCCESS: Walk_PerformIndex: Walked to location: Willows
-> SUCCESS: Walk_ToLoc: Walked to Willows //errors from here. player has full inv.
-> DETAIL: Chop_Trees: Boxes Found: 0
-> ERROR: Chop_Trees: Failed to find tree
-> DETAIL: Find_Randoms: Scanning for random events…// last 3 rows then repeated 15 times. curosr just hovers over the water, does not go near the trees.
-> DETAIL: Chop_Trees: Boxes Found: 0
-> ERROR: Chop_Trees: Failed to find tree
-> DETAIL: Setup_MainLoop: Switching players // current player 10, does not log out. Exit to lobby screen displayed.
NextPlayer
SwitchToPlayer(PlayerNo: 10, Active: True); // same player still logged in. No change, no cursor movement.
-> DETAIL: Setup_Player: Current Woodcutting level: -1
-> ERROR: Find_Hatchet: Failed to find hatchet
NextPlayer
SwitchToPlayer(PlayerNo: 11, Active: False);// same player still logged in. No change, no cursor movement.
-> DETAIL: Find_Randoms: Scanning for random events…
-> SUCCESS: Walk_PerformIndex: Walked to location: Willows // No change, no cursor movement.
-> SUCCESS: Walk_ToLoc: Walked to Willows
-> DETAIL: Chop_Trees: Boxes Found: 0
-> ERROR: Chop_Trees: Failed to find tree
-> DETAIL: Find_Randoms: Scanning for random events…//last 3 rows repeats 18 times.
-> DETAIL: Chop_Trees: Boxes Found: 1
-> DETAIL: Chop_Trees: Length boxesArr[0]): 1
-> DETAIL: Setup_MainLoop: Switching players
NextPlayer
SwitchToPlayer(PlayerNo: 12, Active: True);// same player10 still logged in. No change, no cursor movement.
Welcome to Runescape.
UserName
One minute has passed…
NextPlayer
SwitchToPlayer(PlayerNo: 1, Active: False);// same player10 still logged in. No change, no cursor movement.
Welcome to Runescape.
One minute has passed…
NextPlayer
SwitchToPlayer(PlayerNo: 2, Active: False);
-> DETAIL: Setup_Player: Current Woodcutting level: -1
-> ERROR: Find_Hatchet: Failed to find hatchet
NextPlayer
SwitchToPlayer(PlayerNo: 3, Active: False);
-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Chop_Trees: Boxes Found: 0
-> ERROR: Chop_Trees: Failed to find tree
-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Chop_Trees: Boxes Found: 0
-> ERROR: Chop_Trees: Failed to find tree
-> DETAIL: Setup_MainLoop: Switching players
NextPlayer
SwitchToPlayer(PlayerNo: 4, Active: True);
Welcome to Runescape.
[/php]

Manuall terminate script here. All this time player 10(wc11) just stands still at waters edge. WC01 was chopping Oaks??? Quite a few other lost were in bank or willows with full inv?

Proggy - wc01
[php]
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 38 - |
|=====================================================================================|
| |
| Ran For: 9 Hours, 38 Minutes and 2 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC02 | False | Login Failed| 16 | Willow | 448 | 2 | 30,240 | 1 |
| WC03 | False | Lost | 14 | Willow | 392 | 0 | 26,460 | 1 |
| WC04 | True | Willows | 13 | Willow | 364 | 1 | 24,570 | 1 |
| WC05 | True | Bank | 10 | Willow | 280 | 0 | 18,900 | 1 |
| WC06 | True | Bank | 12 | Willow | 336 | 1 | 22,680 | 1 |
| WC07 | True | Bank | 8 | Willow | 223 | 0 | 15,052 | 1 |
| WC08 | True | Bank | 18 | Willow | 504 | 66 | 34,020 | 2 |
| WC09 | True | Bank | 10 | Willow | 280 | 1 | 18,900 | 1 |
| WC10 | True | Willows | 9 | Willow | 252 | 0 | 17,010 | 0 |
| WC11 | False | Lost | 8 | Willow | 224 | 0 | 15,120 | 0 |
| WC12 | True | Willows | 0 | Willow | 0 | 0 | 0 | 0 |
| WC13 | False | Login Failed| 6 | Willow | 168 | 0 | 11,340 | 0 |
|————————————————————————————-|
| Totals: | 124 | | 3,471 | 71 | 234,292 | 9 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/
[/php]

Coh3n

2010-04-02 10:56:29

Hmm thanks for the feedback. I'm not exactly sure why any of that would happen, but I'll look at it now.

E: Is ChooseOption working for you? Like when the script right clicks on the bank, does it choose to open it?

twobac

2010-04-02 11:12:42

Yes it opens the bank no prob. Not sure why or at which point it stops.
Thought maybe when you log next player in it should check the nick of the
player just logged in matches the one thar the script thinks is in.

Coh3n

2010-04-02 11:15:39

From: twobac
Yes it opens the bank no prob. Not sure why or at which point it stops.
Thought maybe when you log next player in it should check the nick of the
player just logged in matches the one thar the script thinks is in.

Alright, ChooseOption just must be messed up for me then. :confused:

That's not a bad idea, but it shouldn't be needed. I cannot figure out why it would walk back to the trees without banking. Did you happen to see if the script opened the bank before it walked back? If it did, it should have said so in the debug, so I'm really confused.

E: I made some adjustments to Next_Player, try revision 39.

E2: I messed up something with the single player proggy, update to rev 40. :)

twobac

2010-04-02 21:21:42

I will download and have a look. I work out that due to my slow connection, the script this that the player has walked from the bank to the willows, it then searchs for willows in the bank.

Another report for v38, needed some help, when stuck in bank. manually stopped so i can get v40. Standby for feedback/proggy :)

[php]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 20 |
| Lamps Solved : 1 |
| Mods Found : 1 |
| Abysses Solved : 1 |
| Abysses Missed : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 38 - |
|=====================================================================================|
| |
| Ran For: 10 Hours, 12 Minutes and 25 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | True | Bank | 11 | Willow | 308 | 71 | 20,790 | 1 |
| WC02 | True | Bank | 10 | Willow | 280 | 0 | 18,900 | 1 |
| WC03 | True | Bank | 12 | Willow | 336 | 0 | 22,680 | 1 |
| WC04 | True | Willows | 15 | Willow | 420 | 0 | 28,350 | 1 |
| WC05 | True | Bank | 13 | Willow | 364 | 0 | 24,570 | 1 |
| WC06 | False | Lost | 13 | Willow | 364 | 3 | 24,570 | 1 |
| WC07 | True | Bank | 19 | Willow | 532 | 9 | 35,910 | 2 |
| WC08 | False | Lost | 12 | Willow | 336 | 1 | 22,680 | 1 |
| WC09 | True | Willows | 10 | Willow | 280 | 0 | 18,900 | 1 |
| WC10 | True | Bank | 8 | Willow | 224 | 0 | 15,120 | 1 |
| WC11 | True | Bank | 11 | Willow | 308 | 0 | 20,790 | 1 |
| WC12 | True | Bank | 9 | Willow | 252 | 0 | 17,010 | 1 |
| WC13 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
|————————————————————————————-|
| Totals: | 143 | | 4,004 | 84 | 270,270 | 13 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

Abbott

2010-04-03 02:04:10

twobac

2010-04-03 03:34:56

@abbott - make sure you have the latest dev rev (out today) and scar
ScarPreRelease 3.23 rev 80, Includes - Dev Rev424

try re-starting scar if you have the correct versions or change worlds.

Hope that helps :)

Coh3n

2010-04-03 09:39:32

I'm not sure why people are having troubles with the banking. Every time I've testing it works flawlessly. Nevertheless, I have some time later today and I have a couple ideas I'll. Hopefully it'll work better. :)

Thanks for all the feedback!

twobac

2010-04-03 09:57:53

rev 40 proggy. worked better, did have 1 player wsc04 stuck in bank, empty inv could not find trees??? the other two stuck in randoms.

[php][Runtime Error] : Exception: Access violation at address 006CE72A in module 'scar.exe'. Read of address FFFFFFFF in line 275 in script C:\Users\Twobac\Desktop\scarprerelease\includes\SRL\SRL\Core\Text.scar
[/php]

[php]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 22 |
| Lamps Solved : 1 |
| Petes Missed : 1 |
| Molly's Missed : 1 |
| Beekeepers Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 40 - |
|=====================================================================================|
| |
| Ran For: 11 Hours, 45 Minutes and 59 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | True | Bank | 18 | Willow | 489 | 1 | 33,008 | 1 |
| WC02 | True | Bank | 19 | Willow | 532 | 2 | 35,910 | 2 |
| WC03 | True | Lost | 12 | Willow | 336 | 1 | 22,680 | 1 |
| WC04 | True | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC05 | True | Lost | 9 | Willow | 252 | 69 | 17,010 | 1 |
| WC06 | True | Bank | 17 | Willow | 476 | 1 | 32,130 | 1 |
| WC07 | True | Bank | 19 | Willow | 532 | 7 | 35,910 | 2 |
| WC08 | True | Willows | 13 | Willow | 364 | 0 | 24,570 | 1 |
| WC09 | True | Willows | 14 | Willow | 392 | 1 | 26,460 | 1 |
| WC10 | True | Willows | 15 | Willow | 420 | 1 | 28,350 | 1 |
| WC11 | True | Bank | 13 | Willow | 364 | 1 | 24,570 | 1 |
| WC12 | True | Bank | 9 | Willow | 252 | 1 | 17,010 | 1 |
| WC13 | True | Bank | 8 | Willow | 224 | 0 | 15,120 | 1 |
|————————————————————————————-|
| Totals: | 166 | | 4,633 | 85 | 312,728 | 14 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

E: player banked ok, walked back willows then error.
[php]
-> DETAIL: Bank_Open: Length: 107
-> SUCCESS: Bank_Logs: Successfully opened bank!
-> DETAIL: Bank_Logs: Found 28 logs in inventory
-> SUCCESS: Bank_Logs: Successfully banked logs!
-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Find_Randoms: Scanning for random events…
-> ERROR: Walk_PerformIndex: Failed to walk to location: Willows
NextPlayer
SwitchToPlayer(PlayerNo: 3, Active: False);
Welcome to Runescape.
[/php]

Coh3n

2010-04-03 12:32:01

From: twobac

E: player banked ok, walked back willows then error.
[php]
-> DETAIL: Bank_Open: Length: 107
-> SUCCESS: Bank_Logs: Successfully opened bank!
-> DETAIL: Bank_Logs: Found 28 logs in inventory
-> SUCCESS: Bank_Logs: Successfully banked logs!
-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Find_Randoms: Scanning for random events…
-> ERROR: Walk_PerformIndex: Failed to walk to location: Willows
NextPlayer
SwitchToPlayer(PlayerNo: 3, Active: False);
Welcome to Runescape.
[/php]

Was the player standing at the Willows? I was afraid this might happen. I don't know why, but sometimes it seems that the SRL functions FlagPresent and IsMoving return a false negative.

I'll take a look at this also when I look at the banking. I also added your proggy to the first post. :)

twobac

2010-04-03 21:19:08

Yes right beside them.

Cool another spot for me in the 1st page :D :)

next rep. started with wc02 as first player with 10 loads as default. found wc01 with Miles, then next cycle wc01 just banked a load. but could not walk out of bank. script froze, smart then went to lobby and after x time went to the front screen. Script frozen?

debug
[php]-> SUCCESS: Walk_PerformIndex: Walked to location: Bank
-> SUCCESS: Walk_ToLoc: Walked to Bank
-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Bank_Open: Length: 107
-> SUCCESS: Bank_Logs: Successfully opened bank!
-> DETAIL: Bank_Logs: Found 28 logs in inventory
-> SUCCESS: Bank_Logs: Successfully banked logs![/php]

[php]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 22 |
| Lamps Solved : 2 |
| Mazes Missed : 2 |
| ScapeRunes Missed : 1 |
| Petes Missed : 2 |
| Beekeepers Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 40 - |
|=====================================================================================|
| |
| Ran For: 7 Hours, 27 Minutes and 40 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | True | Bank | 1 | Willow | 28 | 0 | 1,890 | 0 |
| WC02 | True | Bank | 8 | Willow | 224 | 0 | 15,120 | 1 |
| WC03 | True | Bank | 21 | Willow | 588 | 0 | 39,690 | 2 |
| WC04 | False | Lost | 2 | Willow | 56 | 0 | 3,780 | 0 |
| WC05 | True | Bank | 18 | Willow | 504 | 0 | 34,020 | 2 |
| WC06 | True | Bank | 16 | Willow | 448 | 0 | 30,240 | 2 |
| WC07 | False | Lost | 11 | Willow | 308 | 0 | 20,790 | 1 |
| WC08 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC09 | True | Willows | 0 | Willow | 0 | 0 | 0 | 0 |
| WC10 | True | Willows | 0 | Willow | 0 | 0 | 0 | 0 |
| WC11 | False | Lost | 9 | Willow | 252 | 0 | 17,010 | 1 |
| WC12 | False | Lost | 12 | Willow | 336 | 1 | 22,680 | 1 |
| WC13 | False | Lost | 8 | Willow | 224 | 1 | 15,120 | 1 |
|————————————————————————————-|
| Totals: | 106 | | 2,968 | 2 | 200,340 | 11 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

topgamer

2010-04-04 10:24:57

bot works great but after doing so many loads it goes to break and switch players when i chose not to switch players. So it wont re log in after break. I put # of players to 1 and it still tries to switch to another one

easyas4

2010-04-04 11:35:54

every time i run the program i get this

-> SUCCESS: Walk_PerformIndex: Walked to location: Bank
-> SUCCESS: Walk_ToLoc: Walked to Bank
-> DETAIL: Find_Randoms: Scanning for random events...
-> DETAIL: Bank_Open: Length: 190
-> SUCCESS: Bank_Logs: Successfully opened bank!
-> DETAIL: Bank_Logs: Found 27 logs in inventory
-> SUCCESS: Bank_Logs: Successfully banked logs!
-> DETAIL: Find_Randoms: Scanning for random events...
-> DETAIL: Find_Randoms: Scanning for random events...
-> ERROR: Walk_PerformIndex: Failed to walk to location: Willows
[Runtime Error] : Out Of Range in line 655 in script C:\Documents and Settings\User\Desktop\scarprerelease\Scripts\WoodCutting\Draynor Chop N' Bank [RUN ME].scar

it runs for a fairly long time and then it ends with this. giving me no progress report. not sure whats up. Also i updated the script but it still says rev 39 at the top. is that supposed to be there? wasnt it supposed to be rev 40?

twobac

2010-04-04 20:01:33

@easyas4 - you can check the change log to see the correct version number. the download version 40, said it was 39. so no problem there :)

The progress report is displayed in the scar report box, you can display this box by pressing the 'toggle report button' on the scar interface. had your player banked? it is displayed after that.

Sgt Soul

2010-04-04 20:39:24

Hmm I've just tried to dl the new revision of this. I did it both manual and automatically updated. I'm pretty sure the one in the svn is 40 and not 39.

[PHP]
{==============================================================================\
| Draynor Chop N' Bank |
| - Revision 39 - |
|==============================================================================|[/PHP]

Even though it says 39 on the released version of the script?
Did you forget to upload the 40 version or did you forget to change what was on the script :).

-Sgt Soul-

twobac

2010-04-04 20:43:11

Sgt Soul, just check the change log :) line 176 :) to see if ur on 40 or not. the script still says 39.

De ja vue

Sgt Soul

2010-04-04 20:47:01

this bit?
[PHP]Rev. 40:
- Fixed a bug on the proggy[/PHP]

Yeah I have the right version hehe :)

i luffs yeww

2010-04-04 20:48:35

I'm sure he just forgot to change the name in the script. ;) He's pretty forgetful about that stuff. (<3 you. ^^)

Triple ninja'd.

easyas4

2010-04-04 22:28:26

From: twobac
@easyas4 - you can check the change log to see the correct version number. the download version 40, said it was 39. so no problem there :)

The progress report is displayed in the scar report box, you can display this box by pressing the 'toggle report button' on the scar interface. had your player banked? it is displayed after that.

im pretty sure he hadnt. i ran the script again today and got this

-> DETAIL: Chop_Trees: Boxes Found: 0
-> ERROR: Chop_Trees: Failed to find tree
-> DETAIL: Find_Randoms: Scanning for random events...
-> DETAIL: Find_Randoms: Scanning for random events...
-> ERROR: Chop_Trees: Failed to find trees 60 times
[Runtime Error] : Out Of Range in line 655 in script C:\Documents and Settings\User\Desktop\scarprerelease\Scripts\WoodCutting\Draynor Chop N' Bank [RUN ME].scar

this time i logged in and he was in the maze random. he hadnt banked.

Sgt Soul

2010-04-05 08:45:26

[PHP]
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 39 - |
|=====================================================================================|
| |
| Ran For: 1 Hours, 21 Minutes and 12 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| ### | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| #### | True | Bank | 28 | Willow | 756 | 1 | 51,030 | 0 |
|————————————————————————————-|
| Totals: | 28 | | 756 | 1 | 51,030 | 0 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/PHP]

A good run, I don't understand this one thing tho. It has happened twice

[PHP] [Runtime Error] : Out Of Range in line 655 in script C:\Documents and Settings\****\My Documents\scarprerelease\Willow\Draynor Chop N' Bank [RUN ME].scar[/PHP]

i luffs yeww

2010-04-05 09:47:27

What's line 655?

Sgt Soul

2010-04-05 09:50:54

[PHP] 655 falseReason[CurrentPlayer] := msg;[/PHP]

Dont have a clue what it means :P

Coh3n

2010-04-05 16:30:42

Alright, no offence to anyone who asked about the version in the script, but it doesn't take a rocket scientist to figure out that I just forgot to update the version. :p Always remember, whatever revision your SVN says, is what version you're at, regardless of what the script says.

From: twobac
Yes right beside them.

Cool another spot for me in the 1st page :D :)

next rep. started with wc02 as first player with 10 loads as default. found wc01 with Miles, then next cycle wc01 just banked a load. but could not walk out of bank. script froze, smart then went to lobby and after x time went to the front screen. Script frozen?

I have no explanation of why the script would freeze, sorry. :(

From: topgamer
bot works great but after doing so many loads it goes to break and switch players when i chose not to switch players. So it wont re log in after break. I put # of players to 1 and it still tries to switch to another one

Did you use the player form, or DeclarePlayers?
_________________________________________

Sorry for getting back so late, I was at my cottage for the weekend. :)

Anyway, sorry about the Out of range error, that was my mistake. I set the length of the falseReason array. Update to revision 41 and it should be fixed.

twobac

2010-04-05 22:51:40

No worries, running 40 at the mo, 25 hours, 30 mins 28 sec :)
still going strong :) Poetry in motion :)

[php]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 52 |
| Lamps Solved : 3 |
| Mods Found : 3 |
| Quizes Solved : 1 |
| Petes Missed : 4 |
| Leo's Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 40 - |
|=====================================================================================|
| |
| Ran For: 25 Hours, 30 Minutes and 28 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | True | Bank | 49 | Willow | 1,372 | 7 | 92,610 | 5 |
| WC02 | True | Bank | 33 | Willow | 924 | 0 | 62,370 | 3 |
| WC03 | True | Bank | 18 | Willow | 504 | 73 | 34,020 | 2 |
| WC04 | True | Bank | 49 | Willow | 1,372 | 73 | 92,610 | 5 |
| WC05 | True | Bank | 44 | Willow | 1,232 | 1 | 83,160 | 5 |
| WC06 | True | Bank | 25 | Willow | 700 | 0 | 47,250 | 1 |
| WC07 | True | Willows | 14 | Willow | 392 | 6 | 26,460 | 1 |
| WC08 | True | Bank | 7 | Willow | 196 | 0 | 13,230 | 0 |
| WC09 | True | Bank | 6 | Willow | 168 | 0 | 11,340 | 0 |
| WC10 | True | Bank | 19 | Willow | 529 | 0 | 35,708 | 2 |
| WC11 | True | Willows | 35 | Willow | 980 | 65 | 66,150 | 3 |
| WC12 | True | Bank | 41 | Willow | 1,148 | 2 | 77,490 | 4 |
| WC13 | True | Willows | 23 | Willow | 644 | 1 | 43,470 | 2 |
|————————————————————————————-|
| Totals: | 363 | | 10,161 | 228 | 685,868 | 33 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

Coh3n

2010-04-05 23:02:22

Very nice. Do you happen to know why a couple of them have only done a couple loads compared to the others?

easyas4

2010-04-05 23:53:10

I know what the SVN says. Im not familiar with how it worked exactly so i didnt know if it was a mistake on your end. Also any thoughts on mine and sgt. souls problem on line 655? ive gotten it multiple times, only posted it twice though.

twobac

2010-04-05 23:56:16

Both had location set to lost, due to completing scape rune (ballon anaimals) unlocking the door but not opening the door. Had to manually walk these back from fally castle.

i luffs yeww

2010-04-05 23:58:20

From: easyas4
Also any thoughts on mine and sgt. souls problem on line 655? ive gotten it multiple times, only posted it twice though.

From: Coh3n
Anyway, sorry about the Out of range error, that was my mistake. I set the length of the falseReason array. Update to revision 41 and it should be fixed.

wat

Coh3n

2010-04-05 23:59:05

From: easyas4
I know what the SVN says. Im not familiar with how it worked exactly so i didnt know if it was a mistake on your end. Also any thoughts on mine and sgt. souls problem on line 655? ive gotten it multiple times, only posted it twice though.

That was the Out of range error I fixed in revision 41. I think I forgot to update the first post, so I'll do that now.

From: twobac
Both had location set to lost, due to completing scape rune (ballon anaimals) unlocking the door but not opening the door. Had to manually walk these back from fally castle.

Ah okay, I understand. :p

Sgt Soul

2010-04-06 01:30:36

ok sweet, I'll get back with a proggy for the new version :)

twobac

2010-04-06 10:25:23

[php]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 72 |
| Lamps Solved : 4 |
| Mods Found : 3 |
| Quizes Solved : 1 |
| Petes Missed : 5 |
| Leo's Solved : 1 |
| Abysses Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 40 - |
|=====================================================================================|
| |
| Ran For: 34 Hours, 8 Minutes and 49 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | True | Bank | 49 | Willow | 1,372 | 7 | 92,610 | 5 |
| WC02 | True | Bank | 43 | Willow | 1,204 | 2 | 81,270 | 4 |
| WC03 | True | Bank | 27 | Willow | 756 | 73 | 51,030 | 3 |
| WC04 | True | Willows | 59 | Willow | 1,652 | 73 | 111,510 | 6 |
| WC05 | True | Bank | 52 | Willow | 1,456 | 2 | 98,280 | 6 |
| WC06 | True | Bank | 43 | Willow | 1,204 | 3 | 81,270 | 3 |
| WC07 | True | Bank | 31 | Willow | 868 | 6 | 58,590 | 3 |
| WC08 | True | Willows | 22 | Willow | 616 | 1 | 41,580 | 1 |
| WC09 | True | Bank | 13 | Willow | 364 | 0 | 24,570 | 0 |
| WC10 | True | Willows | 29 | Willow | 809 | 0 | 54,608 | 3 |
| WC11 | True | Bank | 40 | Willow | 1,120 | 65 | 75,600 | 3 |
| WC12 | True | Bank | 51 | Willow | 1,428 | 2 | 96,390 | 5 |
| WC13 | True | Bank | 32 | Willow | 896 | 1 | 60,480 | 3 |
|————————————————————————————-|
| Totals: | 491 | | 13,745 | 235 | 927,788 | 45 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

Noticed the following in the debug
[php]NextPlayer
SwitchToPlayer(PlayerNo: 7, Active: True);
Welcome to Runescape.
player name
-> DETAIL: Setup_Player: Current Woodcutting level: 67
-> SUCCESS: Setup_Player: Found hatchet!
…
…
NextPlayer
SwitchToPlayer(PlayerNo: 8, Active: False);
Welcome to Runescape.
player name
-> DETAIL: Setup_Player: Current Woodcutting level: 66
-> SUCCESS: Setup_Player: Found hatchet!
…
…
// Player 8 just south of fish spot, could not see willows. Manually moved player to willows, chopping continued but then noticed in debug
…
…
NextPlayer
SwitchToPlayer(PlayerNo: 9, Active: True); //Did not switch still player 8
> DETAIL: Setup_Player: Current Woodcutting level: 66
-> SUCCESS: Setup_Player: Found hatchet!
…
…
NextPlayer
SwitchToPlayer(PlayerNo: 10, Active: True); //Did not switch still player 8
-> DETAIL: Setup_Player: Current Woodcutting level: 66
-> SUCCESS: Setup_Player: Found hatchet!
-> DETAIL: Find_Randoms: Scanning for random events…
…
…
// Manually logged 8 out and 10 in.
[/php]

script still going but smart has white screen :( script is running very slowly, manually terminated.

Coh3n

2010-04-07 13:57:03

Nice report! :) I'll also add that one to the first page.

I *think* the reason your player ended up south of the fishing slop was because when he logged in, he was already at the willows and therefore the script would try to walk to the willows, thus walking too far south. I know how I can fix that, I just need to get the time. :p

Also, I can't explain why the script wouldn't logout the player. I even added an extra logout procedure just in case. My best guess is that it lagged and thought it logged out when it really didn't. :confused:

Sgt Soul

2010-04-07 21:33:25

[PHP]
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 41 - |
|=====================================================================================|
| |
| Ran For: 53 Minutes and 8 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| #### | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| #### | False | Lost | 15 | Willow | 405 | 1 | 27,338 | 0 |
|————————————————————————————-|
| Totals: | 15 | | 405 | 1 | 27,338 | 0 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/PHP]

Player keeps failing when trying to bank, even though he is standing in the bank he can't find the bankers. To show where he is, he is practically in the middle of the bank exactly. Also the bank isn't that busy so I can't see a reason for it to fail :S

-Sgt Soul-

Coh3n

2010-04-07 21:37:36

Odd. Could you do me a favour and replace line 1118 with this:


FindColorsTolerance(bankArr, 6909561, MSX1, MSY1, MSC2, MSY2, 7);

And let me know how it goes?

Thanks!

Sgt Soul

2010-04-07 21:41:31

Ok added it, I will tell you how it goes :)

Coh3n

2010-04-07 21:42:48

Okay thanks. If it seems to work, I'll have to make some modifications to the rest of the Bank_Open function, but we'll see how it goes. :)

AaAaAaAaA

2010-04-07 22:42:55

it seems to get stuck at the graphic settings. it trys to exit but it dosent press the "x" it hovers OVER the X but never hits it.

i luffs yeww

2010-04-07 22:55:27

That's not a script problem, that's a problem with your setting up, I think. (Setting up of SCAR/SRL.)

Coh3n

2010-04-07 23:30:52

From: AaAaAaAaA
it seems to get stuck at the graphic settings. it trys to exit but it dosent press the "x" it hovers OVER the X but never hits it.

That bug was fixed a long time ago. Make sure you have the Dev revision, not the Public. Refer to the guide in my signature if you need help. :)

Sgt Soul

2010-04-07 23:44:14

[PHP]
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 41 - |
|=====================================================================================|
| |
| Ran For: 2 Hours, 4 Minutes and 3 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| #### | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| #### | False | Lost | 35 | Willow | 918 | 0 | 61,965 | 0 |
|————————————————————————————-|
| Totals: | 35 | | 918 | 0 | 61,965 | 0 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/ [/PHP]

Went a lot better this time. Lag spike from my wireless screwed it up I am pretty sure :P

Coh3n

2010-04-07 23:46:33

From: sgt soul

Went a lot better this time. Lag spike from my wireless screwed it up I am pretty sure :P

Awesome, I'm going to commit that right now.

Also, what exactly did it do to mess up? It's suppose to recover from lag.

Sgt Soul

2010-04-08 06:30:09

I Wasn't looking at the screen at the time :S I think it lagged out to main screen and just told me it couldn't find the bank :p / willows at times.

Press Play

2010-04-08 06:53:21

BobboHobbo

2010-04-08 06:55:30

Coh3n im loving your work bro. Especially the progressreports, theres nothing better then that. Keep it up man.

Coh3n

2010-04-08 10:23:31

From: -daazndagger-
Testing it out now. Seems like an EXCEPTIONALLY good script :)
Will post a proggie soon.

btw, rev 42 didn't compile properly. So I'm using rev 41 atm.

EDIT:

[PHP]/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 41 - |
|====================================================|
| |
| Program: SCAR |
| SMART: Yes |
| Ran For: 58 Minutes and 26 Seconds |
| |
| Player: 000 W C 000 |
| Active: False |
| Location: Lost |
| Reason: Failed to walk to location: Bank |
| Tree Type: Willow |
| Loads Done: 14 |
| Logs Cut: 378 |
| Levels Up: 3 |
| Experience: 25,515 |
| Breaks: 0 |
|____________________________________________________|
|____________________________________________________/[/PHP]

isnt 378 logs per hour a bit slow?

This is making me really mad why the walking isn't working as well as it used to. :fiery:

That compiling error is fixed in rev 43. Also, I don't think it's slow? There are many things that can effect the rate of cutting.

From: BobboHobbo
Coh3n im loving your work bro. Especially the progressreports, theres nothing better then that. Keep it up man.

Thanks, I try. :p

Sgt Soul

2010-04-08 20:00:28

[PHP]
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 41 - |
|=====================================================================================|
| |
| Ran For: 11 Hours, 48 Minutes and 32 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| #### | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| #### | False | Willows | 53 | Willow | 1,431 | 0 | 96,592 | 0 |
|————————————————————————————-|
| Totals: | 53 | | 1,431 | 0 | 96,592 | 0 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/ [/PHP]

worked very well, it logged out due to mod :( All good tho <3

And hello BobboHobbo, long time no see :) hehe

Coh3n

2010-04-08 23:18:03

11 hours for only 1500 logs? Any idea what happened?

Sgt Soul

2010-04-09 00:13:16

the timer kept on going but the character didn't log back in. I don't think the log out due to mod finished the script and kept it running. even though nothing was happening

apx900

2010-04-09 04:18:29

Hello hello hello. first of all let me just say what an excellent script this is. i've used it for 2 days so far and its been ace. i'm only come across one problem tho and its all based around the same time. after running for about two hours i get the following error:

[php][Runtime Error] : Exception: Access violation at address 006CE72A in module 'scar.exe'. Read of address FFFFFFFF in line 275 in script ….scarprerelease\includes\SRL\SRL\Core\Text.scar[/php]

i tend to be afk when this error happens, but i think its not something to do with the script and might be SRL. but if do come accross this again i will try to post more details. from what i have seen while i saw it run, it may be slow but i think it ought to remain that way. when you think qbout it, if you are running the script for long hours ar a time, you'r not exactly gonna be super attentive all the way through. and chopping willows isnt exactly the most exciting thing. anyway once again excellent work Coh3n's, and heres onr of my progress report.

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 38 Randoms Report    |
|       [url]www.villavu.com[/url]        |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Lamps Solved      :        1 |
| Frog Solved       :        1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 41 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 2 Hours, 7 Minutes and 2 Seconds       |
|                                                    |
|    Player:   ****                          |
|    Active:   True                                  |
|    Location: Bank                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 19                                |
|      Logs Cut:   532                               |
|      Levels Up:  1                                 |
|      Experience: 35,910                            |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

Coh3n

2010-04-09 11:34:21

From: sgt soul
the timer kept on going but the character didn't log back in. I don't think the log out due to mod finished the script and kept it running. even though nothing was happening

That's weird. Maybe SRL is set to do that when I mod is found. My script is suppose to try logging back in (or switch to the next player if using multiplayer) if the player is found logged out.

From: apx900
Hello hello hello. first of all let me just say what an excellent script this is. i've used it for 2 days so far and its been ace. i'm only come across one problem tho and its all based around the same time. after running for about two hours i get the following error:

[php][Runtime Error] : Exception: Access violation at address 006CE72A in module 'scar.exe'. Read of address FFFFFFFF in line 275 in script ….scarprerelease\includes\SRL\SRL\Core\Text.scar[/php]

i tend to be afk when this error happens, but i think its not something to do with the script and might be SRL. but if do come accross this again i will try to post more details. from what i have seen while i saw it run, it may be slow but i think it ought to remain that way. when you think qbout it, if you are running the script for long hours ar a time, you'r not exactly gonna be super attentive all the way through. and chopping willows isnt exactly the most exciting thing. anyway once again excellent work Coh3n's, and heres onr of my progress report.

Yeah I tend to get that error from time to time. That's a problem with SCAR. The best advise I can give you is to restart SCAR every time you run the script. Sorry for the inconvenience. :(

Press Play

2010-04-10 05:59:22

-> ERROR: Chop_Trees: Failed to find trees 60 times

I find that when the bank symbol is half in the bank and half out, the walking stuffs up. It clicks on the bank symbol, then tries to open the bank while still running. Therefore it fails opening the bank and it clicks the bank symbol again, resulting in the character running outside of the bank again back to where it was before; so it repeats that. It eventually opens the bank but it wastes some time. Just a minor bug I thought I would let you know about :) It doesn't really affect the script that much.

Good script rep+

Corrothead

2010-04-10 10:47:08

Coh3n

2010-04-10 10:59:37

From: -daazndagger-
I find that when the bank symbol is half in the bank and half out, the walking stuffs up. It clicks on the bank symbol, then tries to open the bank while still running. Therefore it fails opening the bank and it clicks the bank symbol again, resulting in the character running outside of the bank again back to where it was before; so it repeats that. It eventually opens the bank but it wastes some time. Just a minor bug I thought I would let you know about :) It doesn't really affect the script that much.

Good script rep+

Could it not find the trees because it was in the Mime random?

Also, it's only suppose to click the bank symbol if it can't find the bank the first few times. But it's also not suppose to try to open the bank until it's stopped moving. I'll have to make some adjustments.

Thanks for the feedback! :)

@Carrothead: Thanks! Nice reports I've added one to the first page. :)

Press Play

2010-04-10 21:24:06

From: Coh3n
Could it not find the trees because it was in the Mime random?

Also, it's only suppose to click the bank symbol if it can't find the bank the first few times. But it's also not suppose to try to open the bank until it's stopped moving. I'll have to make some adjustments.

Thanks for the feedback! :)

Nahh, I solved the mime random while the script was running, so it could run for a longer period of time. I just logged on, and I found out I was in the Fishing for that Bob-the-cat random.

Coh3n

2010-04-10 23:34:13

From: -daazndagger-
Nahh, I solved the mime random while the script was running, so it could run for a longer period of time. I just logged on, and I found out I was in the Fishing for that Bob-the-cat random.

Oh okay. I was concerned the script got lost.

Sgt Soul

2010-04-11 04:00:11

[PHP]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 1 |
| Lamps Solved : 2 |
| Beekeepers Solved : 1 |
| Abysses Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 43 - |
|=====================================================================================|
| |
| Ran For: 2 Hours, 1 Minutes and 59 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| #### | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| #### | False | Lost | 40 | Willow | 1,080 | 1 | 72,900 | 0 |
|————————————————————————————-|
| Totals: | 40 | | 1,080 | 1 | 72,900 | 0 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/PHP]

kudo's ran smooth, took many runs tho :(

Coh3n

2010-04-11 10:48:58

From: sgt soul
kudo's ran smooth, took many runs tho :(

What do you mean? :o

mastaraymond

2010-04-11 18:22:34

Seems like this has the same leaks are your powercutter; the Load_TreeRecords procedure inits the DTM every time it's called resulting in an 'huge' leak ;). And in 'Find_Hatchet' you forget to free the DTMs as well (it only gets freed in certain conditions).

Press Play

2010-04-12 00:51:37

Coh3n

2010-04-12 01:27:55

From: mastaraymond
Seems like this has the same leaks are your powercutter; the Load_TreeRecords procedure inits the DTM every time it's called resulting in an 'huge' leak ;). And in 'Find_Hatchet' you forget to free the DTMs as well (it only gets freed in certain conditions).

Yeah I know I realized that after you pointed in out on the other thread. I have all that fixed, plus I rewrote all the object finding, but now it results in an Access Violation EVERY time after the script does one load. I'm trying to work that out, then everything should be fixed.

Nice run daaz :)

Sgt Soul

2010-04-12 03:56:41

I meant it kept stopping because it got lost many times, and that was the first good I really had :) Still all good tho :P

Coh3n

2010-04-12 11:43:25

From: sgt soul
I meant it kept stopping because it got lost many times, and that was the first good I really had :) Still all good tho :P

Where did your player end up? I should be able to improve it if you tell me what happened. :p

mastaraymond

2010-04-12 16:57:31

Hmm, do you call FindRandoms often enough? Because it was stuck in Pinball and it set the player to false 'because it couldn't find the tree'. Running FindNormalRandoms afterwards, seemed to kinda solve the Pinball (atleast detect it ^^).

Coh3n

2010-04-12 17:08:29

From: mastaraymond
Hmm, do you call FindRandoms often enough? Because it was stuck in Pinball and it set the player to false 'because it couldn't find the tree'. Running FindNormalRandoms afterwards, seemed to kinda solve the Pinball (atleast detect it ^^).

Maybe not. Do you know what the player was doing when it got the random?

Coh3n

2010-04-12 22:39:11

Hey guys,

Please update to revision 44. I've made a TON of updates. I'm hoping this version will work much better for everyone. :)

Cheers,
Coh3n

Sgt Soul

2010-04-13 04:38:42

[PHP]
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 44 - |
|=====================================================================================|
| |
| Ran For: 52 Minutes and 2 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| #### | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| #### | False | Lost | 14 | Willow | 378 | 1 | 25,508 | 0 |
|————————————————————————————-|
| Totals: | 14 | | 378 | 1 | 25,508 | 0 |
| |
| False Reasons: |
| ####: |
| ####: Failed to find uptext: Bank booth 60 times |
|_____________________________________________________________________________________|
[/PHP]

Same error as before, was directly infront of the bank booth furthust away from the willows and couldn't find the bank. Don't know why. I'll try and keep an eye on it, incase the script logged out.

-Sgt Soul-

Coh3n

2010-04-13 10:32:21

From: sgt soul
Same error as before, was directly infront of the bank booth furthust away from the willows and couldn't find the bank. Don't know why. I'll try and keep an eye on it, incase the script logged out.

I honestly don't know why that would happen. It seems to be working perfect for me. Is anyone else having this problem?

Here's a run I had last night:
[PHP]
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 64 |
| Foresters Missed : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 44 - |
|=====================================================================================|
| |
| Ran For: 11 Hours, 37 Minutes and 15 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| *** | False | Lost | 20 | Willow | 560 | 2 | 37,800 | 14 |
| *** | False | Lost | 16 | Willow | 448 | 4 | 30,240 | 12 |
| *** | False | Lost | 12 | Willow | 336 | 3 | 22,680 | 10 |
| *** | False | Lost | 21 | Willow | 588 | 4 | 39,690 | 18 |
|————————————————————————————-|
| Totals: | 69 | | 1,932 | 13 | 130,410 | 54 |
| |
| False Reasons: |
| ***: Failed to find uptext: Willow tree 60 times |
| ***: |
| ***: Failed to walk to location: Bank |
| ***: Failed to find uptext: Willow tree 60 times |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/
[/PHP]

Player 0: Was standing at the Willow trees. Therefore, I am pretty sure that I would have lost connection, and it just took longer than normal to end up at the login screen so it moved the mouse around the trees, and since the screen was frozen, the uptext didn't appear. @sgt soul ~ This could have been what happened with you?
Player 1: Failed to login because it couldn't connect to the server (this is what happens when you have fail internet), but he was in the Forester random anyway.
Player 2: Not exactly sure why he failed. He was standing in the bank. :( Possibly could have lost connection, I don't know.
Player 3: Was stuck in the Leo random. Looks like it didn't detect it, so I may need to add some randoms checks.

mastaraymond

2010-04-13 15:58:07

formWriteln: -> DETAIL: Find_Object: Willow tree - boxes found: 0
formWriteln: -> ERROR: Find_Object: Failed to find object: Willow tree
formWriteln: -> DETAIL: Find_Randoms: Scanning for random events...
formWriteln: -> PLAYER: **********: Find_Object: Failed to find object: Willow
formWriteln: -> PLAYER: **********: Walk_WaitWhile: Location - Lost

While the player was actually in a random (SRL's fault for not detecting the random or?)

Coh3n

2010-04-13 16:04:06

From: mastaraymond

formWriteln: -> DETAIL: Find_Object: Willow tree - boxes found: 0
formWriteln: -> ERROR: Find_Object: Failed to find object: Willow tree
formWriteln: -> DETAIL: Find_Randoms: Scanning for random events...
formWriteln: -> PLAYER: **********: Find_Object: Failed to find object: Willow
formWriteln: -> PLAYER: **********: Walk_WaitWhile: Location - Lost

While the player was actually in a random (SRL's fault for not detecting the random or?)

That's the only thing I can think of. As you can see, it did check for randoms, unless for some reason my Find_Randoms function doesn't actually check for randoms. :confused:

mastaraymond

2010-04-13 16:40:56

From: Coh3n
That's the only thing I can think of. As you can see, it did check for randoms, unless for some reason my Find_Randoms function doesn't actually check for randoms. :confused:

Heck, SRL didn't recognize the beekeeper random.. Now needa look for an accoutn in the beekeeper to fix this (I accidentally let SRL solve it :duh:)

Coh3n

2010-04-13 16:42:20

From: mastaraymond
Heck, SRL didn't recognize the beekeeper random.. Now needa look for an accoutn in the beekeeper to fix this (I accidentally let SRL solve it :duh:)

Well at least you know the solver part of it works. :p

I'll get my army going and see if I can get them in some randoms.

twobac

2010-04-13 23:19:07

just a quick run, nice :). manual stop. no probs :)

[php]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 9 |
| Sandwiches Missed : 1 |
| Frog Solved : 1 |
| Pinballs Missed : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 44 - |
|=====================================================================================|
| |
| Ran For: 5 Hours, 10 Minutes and 46 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | True | Willows | 1 | Willow | 28 | 0 | 1,890 | 0 |
| WC02 | True | Willows | 0 | Willow | 0 | 0 | 0 | 0 |
| WC03 | True | Bank | 6 | Willow | 168 | 0 | 11,340 | 0 |
| WC04 | True | Bank | 10 | Willow | 280 | 0 | 18,900 | 1 |
| WC05 | True | Bank | 8 | Willow | 224 | 0 | 15,120 | 1 |
| WC06 | True | Bank | 10 | Willow | 280 | 0 | 18,900 | 1 |
| WC07 | True | Willows | 7 | Willow | 196 | 0 | 13,230 | 0 |
| WC08 | True | Bank | 9 | Willow | 252 | 0 | 17,010 | 1 |
| WC09 | True | Willows | 5 | Willow | 140 | 0 | 9,450 | 0 |
| WC10 | True | Bank | 10 | Willow | 280 | 0 | 18,900 | 1 |
| WC11 | True | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC12 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC13 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
|————————————————————————————-|
| Totals: | 66 | | 1,848 | 0 | 124,740 | 5 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

Coh3n

2010-04-14 00:46:09

Uhm, are you sure that's revision 44? In the last update I changed the progress report and yours is the same as previous versions.

Sgt Soul

2010-04-14 07:34:29

hmm stats show that I've been cutting oaks, when they are actually willows :P Don't know why. It's quite differen't :P haha

twobac

2010-04-14 12:24:49

I did the svn update and checked the change log, that said v44, script said 43. manually changed script to 44. will update again. :)

Coh3n

2010-04-14 13:48:02

From: twobac
I did the svn update and checked the change log, that said v44, script said 43. manually changed script to 44. will update again. :)

The script should match the revision. What revision does SVN say it's currently at?

twobac

2010-04-14 20:23:24

I re-ran the SVN update and it said it was at revision 44, but I noticed that it said it skipped the Draynor Chop N' Bank [RUN ME].scar file. So I have renamed the file and re-run the update. All ok now at the correct verison.

I ran the new file and found for one player, who must have been stuck in a molly random when he was logged in, the following extract from the debug.

[php]
// Player logged in
-> DETAIL: Find_Object: Willow tree - boxes found: 0
-> ERROR: Find_Object: Failed to find object: Willow tree
-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Find_Object: Willow tree - boxes found: 1 // repeated 12423 times!!!
… // I paused the script and manually solved the molly
… // script restarted.
-> SUCCESS: Find_Object: Found object: Willow tree
-> DETAIL: Chop_Trees: Track Point: (261, 174)[/php]

Coh3n

2010-04-14 22:13:19

From: twobac
I re-ran the SVN update and it said it was at revision 44, but I noticed that it said it skipped the Draynor Chop N' Bank [RUN ME].scar file. So I have renamed the file and re-run the update. All ok now at the correct verison.

I ran the new file and found for one player, who must have been stuck in a molly random when he was logged in, the following extract from the debug.

[php]
// Player logged in
-> DETAIL: Find_Object: Willow tree - boxes found: 0
-> ERROR: Find_Object: Failed to find object: Willow tree
-> DETAIL: Find_Randoms: Scanning for random events…
-> DETAIL: Find_Object: Willow tree - boxes found: 1 // repeated 12423 times!!!
… // I paused the script and manually solved the molly
… // script restarted.
-> SUCCESS: Find_Object: Found object: Willow tree
-> DETAIL: Chop_Trees: Track Point: (261, 174)[/php]

Hmm well apparently SRL didn't detect the Molly random when I should have, but I think I only tell the script to search for randoms when the tree isn't found (or 0 boxes are found), so it's partly my fault.

Thanks for pointing this out, I'll look into making an adjustment right now.

E: Update to Revision 45.

easyas4

2010-04-15 02:13:33

For some reason when i run the script i am getting this error.

Line 653: [Error] (25059:38): Invalid number of parameters in script C:\Documents and Settings\User\Desktop\scarprerelease\Scripts\WoodCutting\Draynor Chop N' Bank [RUN ME].scar

any ideas?

twobac

2010-04-15 07:23:50

@easyas4 - due to how we can modify the script, please tell us what is on your line 653.

copy the whole line and post it :)

Not sure why the short run, will look into and update this later.

[php]//=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 44 - |
|=====================================================================================|
| |
| Ran For: 2 Hours, 16 Minutes and 36 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | False | Lost | 2 | Willow | 56 | 0 | 3,780 | 1 |
| WC02 | False | Lost | 1 | Willow | 28 | 0 | 1,890 | 1 |
| WC03 | False | Lost | 1 | Willow | 28 | 0 | 1,890 | 1 |
| WC04 | False | Lost | 2 | Willow | 56 | 0 | 3,780 | 1 |
| WC05 | False | Lost | 1 | Willow | 28 | 0 | 1,890 | 1 |
| WC06 | False | Lost | 1 | Willow | 28 | 0 | 1,890 | 1 |
| WC07 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC08 | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC09 | False | Lost | 2 | Willow | 56 | 0 | 3,780 | 1 |
| WC10 | False | Lost | 1 | Willow | 28 | 0 | 1,890 | 1 |
| WC11 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC12 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC13 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
|————————————————————————————-|
| Totals: | 11 | | 308 | 0 | 20,790 | 8 |
| |
| False Reasons: |
| WC01: Failed to find object: Willow tree 60 times |
| WC02: Failed to find object: Willow tree 60 times |
| WC03: Failed to find object: Willow tree 60 times |
| WC04: Failed to find object: Willow tree 60 times |
| WC05: Failed to find object: Willow tree 60 times |
| WC06: Failed to find object: Willow tree 60 times |
| WC07: Failed to find object: Willow tree 60 times |
| WC08: |
| WC09: Failed to find object: Willow tree 60 times |
| WC10: Failed to find object: Willow tree 60 times |
| WC11: Failed to walk to location: Willows |
| WC12: Failed to walk to location: Bank |
| WC13: Failed to find object: Willow tree 60 times |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

easyas4

2010-04-15 08:19:23

[PHP] DCnB_Debug('Level_Gained', 'Congratulations, you have gained a Woodcutting level!', DEBUG_PLAYER);
GameTab(tab_Stats);
p := SkillToCoords(skill_Woodcutting);
Mouse(p.x, p.y, 3, 0, True);[/PHP]

This is lines 651-654

Coh3n

2010-04-15 10:12:42

From: twobac
@easyas4 - due to how we can modify the script, please tell us what is on your line 653.

copy the whole line and post it :)

Not sure why the short run, will look into and update this later.

[php]//=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 44 - |
|=====================================================================================|
| |
| Ran For: 2 Hours, 16 Minutes and 36 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | False | Lost | 2 | Willow | 56 | 0 | 3,780 | 1 |
| WC02 | False | Lost | 1 | Willow | 28 | 0 | 1,890 | 1 |
| WC03 | False | Lost | 1 | Willow | 28 | 0 | 1,890 | 1 |
| WC04 | False | Lost | 2 | Willow | 56 | 0 | 3,780 | 1 |
| WC05 | False | Lost | 1 | Willow | 28 | 0 | 1,890 | 1 |
| WC06 | False | Lost | 1 | Willow | 28 | 0 | 1,890 | 1 |
| WC07 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC08 | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC09 | False | Lost | 2 | Willow | 56 | 0 | 3,780 | 1 |
| WC10 | False | Lost | 1 | Willow | 28 | 0 | 1,890 | 1 |
| WC11 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC12 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC13 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
|————————————————————————————-|
| Totals: | 11 | | 308 | 0 | 20,790 | 8 |
| |
| False Reasons: |
| WC01: Failed to find object: Willow tree 60 times |
| WC02: Failed to find object: Willow tree 60 times |
| WC03: Failed to find object: Willow tree 60 times |
| WC04: Failed to find object: Willow tree 60 times |
| WC05: Failed to find object: Willow tree 60 times |
| WC06: Failed to find object: Willow tree 60 times |
| WC07: Failed to find object: Willow tree 60 times |
| WC08: |
| WC09: Failed to find object: Willow tree 60 times |
| WC10: Failed to find object: Willow tree 60 times |
| WC11: Failed to walk to location: Willows |
| WC12: Failed to walk to location: Bank |
| WC13: Failed to find object: Willow tree 60 times |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

What the…? Why is it not finding the tree… :confused:

From: easyas4
[PHP] DCnB_Debug('Level_Gained', 'Congratulations, you have gained a Woodcutting level!', DEBUG_PLAYER);
GameTab(tab_Stats);
p := SkillToCoords(skill_Woodcutting);
Mouse(p.x, p.y, 3, 0, True);[/PHP]

This is lines 651-654

I can't see why you'd be getting an error. Can you post the whole script?

E: Oh, make sure your SRL is up to date.

twobac

2010-04-15 20:15:18

Ok having some problems with this version (v45)

[php]| Coh3n's Draynor Chop N' Bank! |
| - Revision 45 - |
|=====================================================================================|
| |
| Ran For: 3 Hours, 40 Minutes and 34 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
|Alias | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | False | Lost | 1 | Willow | 28 | 0 | 1,890 | 1 |
| WC02 | False | Lost | 5 | Willow | 140 | 0 | 9,450 | 3 |
| WC03 | False | Lost | 4 | Willow | 112 | 0 | 7,560 | 4 |
| WC04 | False | Lost | 4 | Willow | 112 | 0 | 7,560 | 4 |
| WC05 | False | Lost | 3 | Willow | 84 | 0 | 5,670 | 3 |
| WC06 | False | Lost | 4 | Willow | 112 | 0 | 7,560 | 3 |
| WC07 | False | Lost | 5 | Willow | 140 | 0 | 9,450 | 3 |
| WC08 | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC09 | False | Lost | 4 | Willow | 112 | 0 | 7,560 | 4 |
| WC10 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC11 | False | Lost | 2 | Willow | 56 | 0 | 3,780 | 1 |
| WC12 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC13 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
|————————————————————————————-|
| Totals: | 32 | | 896 | 0 | 60,480 | 26 |
| |
| False Reasons: |
| WC01: Failed to find object: Willow tree 60 times // in Bank, 3rd slot, empty inv |
| WC02: Failed to find object: Willow tree 60 times // in Bank, 3rd slot, empty inv |
| WC03: Failed to find object: Willow tree 60 times // in Bank, 3rd slot, empty inv |
| WC04: Failed to find object: Willow tree 60 times // in Bank, 4th slot, empty inv |
| WC05: Failed to walk to location: Willows // @ willows, north 2 trees, full inv |
| WC06: Failed to find object: Willow tree 60 times // in Bank, 1st slot, empty inv |
| WC07: Failed to find object: Willow tree 60 times // in Bank, 1st slot, empty inv |
| WC08: // Player out on loan, Active set to false in declare players |
| WC09: Failed to find object: Willow tree 60 times // in Bank, 3rd slot, empty inv |
| WC10: Failed to find hatchet // Sargent Random |
| WC11: Failed to walk to location: Willows// @ willows, South 2 trees, empty inv |
| WC12: Failed to find uptext: Willow tree 60 times // Scape rune Failed random |
| WC13: Failed to find object: Willow tree 60 times // Maze failed random |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

I would ignore wc10, 12 & 13 as they were possibly in randoms from a previous run, did not have time to re-set up the positions.

WC1 to 9, stuck in the bank :(, maybe you could check the symbol distance from the centre of the MM?

Coh3n

2010-04-15 21:15:00

Wow what is going on. It's as if it things it's walking to the Willows when it's really not. :confused: I'm not sure how that could happen because I don't even use any color routines for the Willow walking, I strictly do coord clicking in a random point in a box. Maybe something happens that causes the script to not reset the player location. I don't see why, as I use the same function to set the location for every walking point in the script.

This is weird, I'll have to take a close look at it. :) Thanks for bringing this to my attention.

chaoyd

2010-04-15 22:07:44

From: easyas4
[PHP] DCnB_Debug('Level_Gained', 'Congratulations, you have gained a Woodcutting level!', DEBUG_PLAYER);
GameTab(tab_Stats);
p := SkillToCoords(skill_Woodcutting);
Mouse(p.x, p.y, 3, 0, True);[/PHP]

This is lines 651-654

I had this problem too. Update SRL and it goes away. :)

twobac

2010-04-16 19:29:28

Just watched a player 'get lost' as he started to run out of the bank, energy hit 0, started walking, all while flag is present, gets to the willows then, [php]Walk_WaitWhile: Location - Lost[/php]

Coh3n

2010-04-17 14:23:46

From: twobac
Just watched a player 'get lost' as he started to run out of the bank, energy hit 0, started walking, all while flag is present, gets to the willows then, [php]Walk_WaitWhile: Location - Lost[/php]

What were the debug lines before it said that? I'm pretty sure that occurred during the Next_Player procedure, even though it says Walk_WaitWhile (that was my mistake), so the lines before would be very helpful.

I've made a couple changes that may help in revision 46. I would still like to see the entire debug if possible. Thanks.

fumaor

2010-04-18 09:43:13

Working perfect (: tha best script

Sgt Soul

2010-04-18 10:27:16

From: fumaor
Working perfect (: tha best script

You should probably add a progress report with that, so the script can continue running at its perfect rate?

Sorry I have not used it in a while cohen, I will try to get myself back into it :)

-Sgt Soul-

easyas4

2010-04-18 11:08:53

The script runs great for me. Only one problem. It still opens like 50 kajillion tabs of secure runescape whatever. My computer only has 1gig of RAM so this coupled with SMART pretty much destroys any possibility of a script running smoothly. I always wake up and my computer is pretty much frozen. The only way I can get it out of its funk is if i use the Task Manager. If you could find out how to avoid that, i would love you forever :D

~Easy

Coh3n

2010-04-18 12:19:01

From: easyas4
The script runs great for me. Only one problem. It still opens like 50 kajillion tabs of secure runescape whatever. My computer only has 1gig of RAM so this coupled with SMART pretty much destroys any possibility of a script running smoothly. I always wake up and my computer is pretty much frozen. The only way I can get it out of its funk is if i use the Task Manager. If you could find out how to avoid that, i would love you forever :D

~Easy

Wait, it still opens the tabs even when you're using SMART?

Also, which window does it open? Do you think you could find out witch button on the RS window that it's clicking to bring up this window?

easyas4

2010-04-18 21:51:48

Yup. I had two pages filled with this tab. Now that I think about it, it is really weird that it is opening a firefox page while in scar… I cant seem to remember which page it was. I usually run over night when I'm not on because i cant do anything else or else the script will not run properly. Also I looked in my google search toolbar history and found it had searched for some .dll which is extrememly weird (had this happen twice). I will look into what is happening, maybe tonight, maybe tomorrow. Ill let you know when I find out.

~Easy

Coh3n

2010-04-18 22:12:45

From: easyas4
Yup. I had two pages filled with this tab. Now that I think about it, it is really weird that it is opening a firefox page while in scar… I cant seem to remember which page it was. I usually run over night when I'm not on because i cant do anything else or else the script will not run properly. Also I looked in my google search toolbar history and found it had searched for some .dll which is extrememly weird (had this happen twice). I will look into what is happening, maybe tonight, maybe tomorrow. Ill let you know when I find out.

~Easy

The same thing has happened to me (but with a different script). Does your account have an email registered to it? If not, try registering and see if it happens again.

easyas4

2010-04-19 01:57:24

None of them do. Will that fix the problem? Did it for you?

Coh3n

2010-04-19 02:01:19

From: easyas4
None of them do. Will that fix the problem? Did it for you?

I'm not sure, but when the bug occurred for me, the email subscription page was open. So, if you have an email registered, then there's no button to click to register the email. Know what I mean? :p

Coh3n

2010-04-19 18:39:35

Hey guys,

Please try out revision 48 if you get the chance. I made a lot of changes that I think should fix some issues. I haven't tested it yet, so please post feedback. :)

If you're a Simba tester, I highly recommend testing with it rather than SCAR.

E: Revision 49 now. I forgot to change it in the script so that may be misleading.

E2: Revision 50.

twobac

2010-04-20 00:06:53

Downloaded, just set off a test run

Edit: ok here is the proggy. i manually stopped it. set to do 1 load per player. only logged in 4 players over 7 hours, banked 4 loads, chopped 6 loads?

wc01 - bank
wc02 - bank
wc03 - loc far south of fish spot at corner of land with island visible.
wc04 - loc far south of fish spot at corner of land with island visible.

[php]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 50 - |
|=====================================================================================|
| |
| Ran For: 6 Hours, 54 Minutes and 33 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Alias| Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC01 | True | Bank | 2 | Willow | 56 | 0 | 3,780 | 1 |
| WC02 | True | Bank | 2 | Willow | 56 | 0 | 3,780 | 1 |
| WC03 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC04 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC05 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC06 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC07 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC13 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC09 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC10 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC11 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| WC12 | True | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
|————————————————————————————-|
| Totals: | 4 | | 112 | 0 | 7,560 | 2 |
| |
| False Reasons: |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/[/php]

Coh3n

2010-04-20 13:58:20

Thanks for the feedback. I don't know what keeps going wrong, but I've reverted back to revision 40 (which is now revision 51), so it should work better. I'd still like some feedback just to make sure.

Thanks,
Coh3n

E: @twobac: I completely changed the walking in that version, and obviously it didn't work like I intended. It's back to the way it was. :p

twobac

2010-04-20 22:16:03

ok i will test it :)

Coh3n

2010-04-20 22:24:04

From: twobac
ok i will test it :)

Thanks man. I'm testing it Simba right now and everything seems to be going smooth. I did notice, however, that if the SMART screen "whites out" for long enough, that it will say it switched players, when it really didn't? Know what I mean?

So, for example, player 0 was logged in, chopping trees when SMART whites out. The script thinks the player is logged out, thus switching players. Now the script thinks player 1 is logged in when player 0 never actually logged out. Since player 0 was at the trees, the script tries to walk to the Willows, thus running out of range of the trees.

I have an idea to add a failsafe so if the script can't find the trees after 10 or so tries, it will walk a little north of the fishing symbol. This would let the player continue to run the script, but the progress report would be off, but I'd rather that then the player set to false.

mastaraymond

2010-04-21 02:51:29

From: Coh3n
Thanks man. I'm testing it Simba right now and everything seems to be going smooth. I did notice, however, that if the SMART screen "whites out" for long enough, that it will say it switched players, when it really didn't? Know what I mean?

So, for example, player 0 was logged in, chopping trees when SMART whites out. The script thinks the player is logged out, thus switching players. Now the script thinks player 1 is logged in when player 0 never actually logged out. Since player 0 was at the trees, the script tries to walk to the Willows, thus running out of range of the trees.

I have an idea to add a failsafe so if the script can't find the trees after 10 or so tries, it will walk a little north of the fishing symbol. This would let the player continue to run the script, but the progress report would be off, but I'd rather that then the player set to false.

Also experiencing this problem.. Makes sense though, LoggedIn will return false for a moment when smart blocks-out. This probably has to do with the fact that SMART has a different setup for Simba (we directly acces the client data) whereas the plugin in Scar would read the data from a bitmap (which smart copies the whole time).. So in Scar it will just not copy the data for a few secs, causing no problems. Simba however will just keep reading and thus read the White data, which results into a few problems like this..

Not sure how to solve this yet :/

twobac

2010-04-21 07:54:07

Version 52 proggy - stopped due to update

[php]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 6 |
| Capn Arnav Missed : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 52 - |
|=====================================================================================|
| |
| Ran For: 3 Hours, 51 Minutes and 33 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Alias| Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC09 | False | Lost | 8 | Willow | 224 | 0 | 15,120 | 0 |
| WC10 | False | Lost | 13 | Willow | 364 | 0 | 24,570 | 0 |
| WC11 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC12 | True | Willows | 17 | Willow | 476 | 1 | 32,130 | 1 |
| WC13 | True | Bank | 16 | Willow | 448 | 1 | 30,240 | 1 |
|————————————————————————————-|
| Totals: | 54 | | 1,512 | 2 | 102,060 | 2 |
|_____________________________________________________________________________________|
| |
| False Reasons: |
| ¯¯¯¯¯¯¯¯¯¯¯¯¯¯ |
| 0: WC09 -> Failed to walk to location: Willows |
| 1: WC10 -> Failed to walk to location: Willows |
| 2: WC11 -> Failed to find trees 60 times |
|_____________________________________________________________________________________/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 52 - |
|=====================================================================================|
| |
| Ran For: 3 Hours, 53 Minutes and 39 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Alias| Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC09 | False | Lost | 8 | Willow | 224 | 0 | 15,120 | 0 |
| WC10 | False | Lost | 13 | Willow | 364 | 0 | 24,570 | 0 |
| WC11 | False | Lost | 0 | Willow | 0 | 0 | 0 | 0 |
| WC12 | False | Lost | 17 | Willow | 476 | 1 | 32,130 | 1 |
| WC13 | False | Lost | 16 | Willow | 448 | 1 | 30,240 | 1 |
|————————————————————————————-|
| Totals: | 54 | | 1,512 | 2 | 102,060 | 2 |
|_____________________________________________________________________________________|
| |
| False Reasons: |
| ¯¯¯¯¯¯¯¯¯¯¯¯¯¯ |
| 0: WC09 -> Failed to walk to location: Willows |
| 1: WC10 -> Failed to walk to location: Willows |
| 2: WC11 -> Failed to find trees 60 times |
| 3: WC12 -> Failed to find uptext 60 times |
| 4: WC13 -> Failed to walk to location: Willows |
|_____________________________________________________________________________________/[/php]

Coh3n

2010-04-21 10:42:58

From: mastaraymond
Also experiencing this problem.. Makes sense though, LoggedIn will return false for a moment when smart blocks-out. This probably has to do with the fact that SMART has a different setup for Simba (we directly acces the client data) whereas the plugin in Scar would read the data from a bitmap (which smart copies the whole time).. So in Scar it will just not copy the data for a few secs, causing no problems. Simba however will just keep reading and thus read the White data, which results into a few problems like this..

Not sure how to solve this yet :/

What about editing the LoggedIn function to have it handle white screens?
[php]
t := GetSystemTime + 10000;
while (GetSystemTime < t) do
begin
Wait(RandomRange(50, 100));
if (CountColor(clWhite, MSX1, MSY1, MSX2, MSY2) < 1000)) then
Break;
end;
[/php]

@twobac: So it seems to be working a lot better. Where were your characters when they got lost? Here's a report I got last night. It stopped because of an out of range error that I'm looking for right now.
[PHP]
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 52 - |
|=====================================================================================|
| |
| Ran For: 5 Hours, 37 Minutes and 20 Seconds |
| Program: Simba | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|?? ?? ??? ?? ?? ??? ?? ??? ??|
| *** | True | Willows | 4 | Willow | 112 | 0 | 7,560 | 2 |
| *** | True | Bank | 9 | Willow | 252 | 1 | 17,010 | 7 |
| *** | True | Bank | 6 | Willow | 168 | 0 | 11,340 | 6 |
| *** | True | Bank | 8 | Willow | 224 | 0 | 15,120 | 6 |
| *** | True | Willows | 6 | Willow | 168 | 1 | 11,340 | 5 |
|————————————————————————————-|
| Totals: | 33 | | 924 | 2 | 62,370 | 26 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/
[/PHP]

mastaraymond

2010-04-21 11:10:52

From: Coh3n
What about editing the LoggedIn function to have it handle white screens?
[php]
t := GetSystemTime + 10000;
while (GetSystemTime < t) do
begin
Wait(RandomRange(50, 100));
if (CountColor(clWhite, MSX1, MSY1, MSX2, MSY2) < 1000)) then
Break;
end;
[/php]

@twobac: So it seems to be working a lot better. Where were your characters when they got lost? Here's a report I got last night. It stopped because of an out of range error that I'm looking for right now.
[PHP]
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 52 - |
|=====================================================================================|
| |
| Ran For: 5 Hours, 37 Minutes and 20 Seconds |
| Program: Simba | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|?? ?? ??? ?? ?? ??? ?? ??? ??|
| *** | True | Willows | 4 | Willow | 112 | 0 | 7,560 | 2 |
| *** | True | Bank | 9 | Willow | 252 | 1 | 17,010 | 7 |
| *** | True | Bank | 6 | Willow | 168 | 0 | 11,340 | 6 |
| *** | True | Bank | 8 | Willow | 224 | 0 | 15,120 | 6 |
| *** | True | Willows | 6 | Willow | 168 | 1 | 11,340 | 5 |
|————————————————————————————-|
| Totals: | 33 | | 924 | 2 | 62,370 | 26 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/
[/PHP]

However this doesn't only affect LoggedIn it affects every client search, so I'm not quite sure what to do about it (yet).

Coh3n

2010-04-21 11:13:40

From: mastaraymond
However this doesn't only affect LoggedIn it affects every client search, so I'm not quite sure what to do about it (yet).

Hmm, figure out why SMART does it in the first place, and go from there. :p

Rich

2010-04-21 14:32:40

Worked great for me Coh3n. Small proggy:

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 53 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 2 Hours, 12 Minutes and 18 Seconds     |
|                                                    |
|    Player:                               |
|    Location: Lost                                  |
|    Active:   False                                 |
|    Reason:   Cut desired number of logs            |
|      Tree Type:  Willow                            |
|      Loads Done: 36                                |
|      Logs Cut:   1,008                             |
|      Levels Up:  1                                 |
|      Experience: 68,040                            |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

Coh3n

2010-04-21 14:47:36

Very nice. I'm glad to see it's working again. :p

Thanks for using. :)

Rich

2010-04-21 15:12:21

No problem. Hopefully I'll get a nice long proggy over the weekend.

Coh3n

2010-04-21 15:23:57

From: R1ch
No problem. Hopefully I'll get a nice long proggy over the weekend.

Awesome, good luck! :)

mastaraymond

2010-04-21 18:02:49

[2:15:38]: /====================================================|
[2:15:38]: |           Coh3n's Draynor Chop N' Bank!            |
[2:15:38]: |                  - Revision 50 -                   |
[2:15:38]: |====================================================|
[2:15:38]: |                                                    |
[2:15:38]: |    Program: Simba                                  |
[2:15:38]: |    SMART:   Yes                                    |
[2:15:38]: |    Ran For: 2 Hours, 15 Minutes and 38 Seconds     |
[2:15:38]: |                                                    |
[2:15:38]: |    Player:   ******                          |
[2:15:38]: |    Active:   True                                  |
[2:15:38]: |    Location: Bank                                  |
[2:15:38]: |      Tree Type:  Willow                            |
[2:15:38]: |      Loads Done: 33                                |
[2:15:38]: |      Logs Cut:   924                               |
[2:15:38]: |      Logs P/H:   408                               |
[2:15:38]: |      Levels Up:  0                                 |
[2:15:38]: |      Experience: 62,370                            |
[2:15:38]: |      Breaks:     0                                 |
[2:15:38]: |____________________________________________________|
[2:15:38]: |____________________________________________________/

godofdestroi

2010-04-21 19:07:03

Heey,

If i start the script, and it opens S.M.A.R.T. It wont loggin after loading everything, it just does nothing :O. Cane u help me

Great full thanks :).

Coh3n

2010-04-21 19:22:56

@ray: Nice, I see you've added Logs/hour. :p Perhaps it's something I should add.

From: godofdestroi
Heey,

If i start the script, and it opens S.M.A.R.T. It wont loggin after loading everything, it just does nothing :O. Cane u help me

Great full thanks :).

Try stopping and restarting the script.

easyas4

2010-04-21 20:38:43

Given i haven't registered the characters yet there is still a problem. It opens two types of pages, one is the email registration that we know about, and the other is the password recovery page. Both "secure runescape" pages. I assume the button is in the login page.

~Easy

twobac

2010-04-21 20:51:12

From: godofdestroi
Heey,

If i start the script, and it opens S.M.A.R.T. It wont loggin after loading everything, it just does nothing :O. Cane u help me

Great full thanks :).

@godofdestroi: Sounds like you may need to update ur SRL, as the log in page has changed :) SRL version is now 456.

[PHP]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 43 |
| Lamps Solved : 2 |
| Quizes Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/[/PHP]
[PHP]/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 52 - |
|=====================================================================================|
| |
| Ran For: 6 Hours, 50 Minutes and 30 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Alias| Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC09 | False | Lost | 24 | Willow | 672 | 1 | 45,360 | 12 |
| WC10 | False | Lost | 11 | Willow | 308 | 0 | 20,790 | 4 |
| WC11 | False | Lost | 17 | Willow | 475 | 0 | 32,062 | 7 |
| WC12 | False | Lost | 10 | Willow | 280 | 0 | 18,900 | 5 |
| WC13 | False | Lost | 29 | Willow | 812 | 0 | 54,810 | 10 |
|————————————————————————————-|
| Totals: | 91 | | 2,547 | 1 | 171,922 | 38 |
|_____________________________________________________________________________________|
| |
| False Reasons: |
| ¯¯¯¯¯¯¯¯¯¯¯¯¯¯ |
| 0: WC09 -> Failed to walk to location: Willows // Loc: Willows, Empty inv. |
| 1: WC10 -> Failed to walk to location: Willows // Loc: Willows, Empty inv. |
| 2: WC11 -> Failed to find trees 60 times // Maze Random. |
| 3: WC12 -> Failed to find trees 60 times // Loc: Bank, Empty Inv. |
| 4: WC13 -> Failed to walk to location: Bank // Loc: Bank, Full Inv. |
|_____________________________________________________________________________________/[/PHP]

So much better :) I set the loads to 3, will increase now to get a longer report. Cool :spot:

Coh3n

2010-04-21 23:15:36

From: easyas4
Given i haven't registered the characters yet there is still a problem. It opens two types of pages, one is the email registration that we know about, and the other is the password recovery page. Both "secure runescape" pages. I assume the button is in the login page.

~Easy

Well whatever it is, I don't think it's my script as I don't have any functions that do anything in the login menu. That's all in SRL.

@twobac: It still bugs me that the walking is failing. I don't understand why. :(

I've added something to Walk_WaitWhile. Give Revision 54 a try. :)

mastaraymond

2010-04-22 04:58:11

From: Coh3n
@ray: Nice, I see you've added Logs/hour. :p Perhaps it's something I should add.

Try stopping and restarting the script.

    AddToProggy(PadR('|      Logs P/H:   ' + GroupDigits(Integers[P_LOGS]*60*60/(gettimerunning/1000), ','), 53) + '|');

;)

Coh3n

2010-04-22 09:43:49

From: mastaraymond

    addtoproggy(padr('|      logs p/h:   ' + groupdigits(integers[p_logs]*60*60/(gettimerunning/1000), ','), 53) + '|');

;)

<3

E: Added in revision 55. It's only in the single player proggy for now as the multiplayer one will take a little longer.

twobac

2010-04-22 12:48:24

Coh3n,

As I seem to be the only user getting lost / just reporting it, it just maybe be due to my internet connect on my boat, as it is a V-sat connection. broadband with a very very narrow outlook on life.

Coh3n

2010-04-22 14:10:54

From: twobac
Coh3n,

As I seem to be the only user getting lost / just reporting it, it just maybe be due to my internet connect on my boat, as it is a V-sat connection. broadband with a very very narrow outlook on life.

Lol no idea what V-sat is, but I'm going to assume you mean you lose connection a lot. In which case, that could be the problem. :)

ali_n_5

Hey i used the script after following the set up tutorial step by step except WINE. in the end it says cant find hatchet and that lvl -1 and that i entered invalid username or pass… i input the script into upto date SCAR v 3.23 and i have latest SRL but and i changed the player form and stuff but it didnt work then i decided not to touch anything so i just filled in the player form and had SMART turned on. All it does for me is open up SMART and wait at the choose the game type screeni by passed that screen and logged in thats when it said cant find the playeror hatchet and that woodcutting lvl is -1 can u please help.

BlueWorld

2010-04-23 03:41:49

susing simba getting this =[

Error: Exception: Access violation at line 108
The following DTMs were not freed: [SRL - Lamp bitmap]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap]
File[D:\Simba\Includes\SRL\Logs\SRL Log 22-04-10 0.txt] has not been freed in the script, freeing it now.

itSchRis917

2010-04-23 09:28:01

I used it with Simba last night BlueWorld and it worked fine. You at the latest revision?

spart300

2010-04-23 10:16:51

Ok I'm back. Been gone for a while. I'm using now so far no problems so lets hope it stays that way. Wow..I've been gone for a while..20 updates and a whole lot of SRL updates I missed. Ok Well C0hen I'll be sure to let you know if anything goes wrong.

UPDATE: Wow thats alot of detail things going on lol.. I guess it's cause I chose detail high on the player form?

Coh3n

2010-04-23 11:34:11

From: ali_n_5
Hey i used the script after following the set up tutorial step by step except WINE. in the end it says cant find hatchet and that lvl -1 and that i entered invalid username or pass… i input the script into upto date SCAR v 3.23 and i have latest SRL but and i changed the player form and stuff but it didnt work then i decided not to touch anything so i just filled in the player form and had SMART turned on. All it does for me is open up SMART and wait at the choose the game type screeni by passed that screen and logged in thats when it said cant find the playeror hatchet and that woodcutting lvl is -1 can u please help.

Jesus, I have no idea what you said.

From: BlueWorld
susing simba getting this =[

That wouldn't happen in line 108 of my script as it's a constant. What's line 108 of the script that was opened?

From: spart300
Ok I'm back. Been gone for a while. I'm using now so far no problems so lets hope it stays that way. Wow..I've been gone for a while..20 updates and a whole lot of SRL updates I missed. Ok Well C0hen I'll be sure to let you know if anything goes wrong.

UPDATE: Wow thats alot of detail things going on lol.. I guess it's cause I chose detail high on the player form?

You chose SMART to go in high detail?

spart300

2010-04-23 12:19:46

Yeah But it doesn't look like it makes much of a difference. When I click it true or false it never changes anything. I got stuck in a random. Restarting :(

ali_n_5

2010-04-23 16:44:31

Lol sorry… what i mean is i dont have WINE and idk how to get it. and when i tried the script with SMART activated and Player Forms on SMART opened a runescape window but didnt do anything from there. When i logged in bymyself by disabling SMART and ran the script again when SMART enabled the window on the bottom of SCAR said:

oh wow i tried getting the msg again and now theres a new problem:
Line 270: [Error] (15589:1): Invalid number of parameters in script C:\SCAR 3.22\Includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

This is what is on line 270:
s := Trim(LowerCase(Between('Have a', 'for free', s)));

BlueWorld

2010-04-23 17:00:37

i don't get simba, i installed it, updated it and tried to run script, maybe its cause i don't have java sdk? cause in the cmd it says cannot find virtual library, but i looked for sdk java and can't find a download page

Rich

2010-04-23 17:19:31

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 55 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 3 Hours, 5 Minutes and 1 Seconds       |
|                                                    |
|    Player:                             |
|    Location: Lost                                  |
|    Active:   False                                 |
|    Reason:   Cut desired number of logs            |
|      Tree Type:  Willow                            |
|      Loads Done: 58                                |
|      Logs Cut:   1,624                             |
|      Logs P/H:   526                               |
|      Levels Up:  0                                 |
|      Experience: 109,620                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

Coh3n

2010-04-23 17:24:17

From: ali_n_5
Lol sorry… what i mean is i dont have WINE and idk how to get it. and when i tried the script with SMART activated and Player Forms on SMART opened a runescape window but didnt do anything from there. When i logged in bymyself by disabling SMART and ran the script again when SMART enabled the window on the bottom of SCAR said:

oh wow i tried getting the msg again and now theres a new problem:
Line 270: [Error] (15589:1): Invalid number of parameters in script C:\SCAR 3.22\Includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

This is what is on line 270:
s := Trim(LowerCase(Between('Have a', 'for free', s)));

Well if you're using Ubuntu then SCAR won't even open unless you're using WINE.

You still have SCAR 3.22, not 3.23.

From: BlueWorld
i don't get simba, i installed it, updated it and tried to run script, maybe its cause i don't have java sdk? cause in the cmd it says cannot find virtual library, but i looked for sdk java and can't find a download page

Sorry, I don't exactly know what that means. But if you can load an RS page in Firefox, then you should be fine.

@R1ch: Nice proggy! :D

ali_n_5

2010-04-23 17:30:57

but i do have scar 3.23 it says SCAR Divi 3.23 Beta on the top of the window
and whats ubuntu

Rich

2010-04-23 17:31:26

From: Coh3n
@R1ch: Nice proggy! :D

Cheers. Hopefully I'll get a nice long one over the next couple of days.

One little thing I've noticed though is that although I enter my stats details correctly (double & triple checked) I still get told that I'm entering them wrong. Maybe something new appeared whilst I was AWOL that you could link me to?

Richard.

Cazabacca

2010-04-23 17:31:55

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 38 Randoms Report    |
|       [url]www.villavu.com[/url]        |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Lamps Solved      :        1 |
| Capn Arnav Solved :        1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 55 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 4 Hours, 33 Minutes and 44 Seconds     |
|                                                    |
|    Player:                            |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 49                                |
|      Logs Cut:   1,372                             |
|      Logs P/H:   300                               |
|      Levels Up:  7                                 |
|      Experience: 92,610                            |
|      Breaks:     4                                 |
|____________________________________________________|
|____________________________________________________/

Coh3n

2010-04-23 17:35:38

From: ali_n_5
but i do have scar 3.23 it says SCAR Divi 3.23 Beta on the top of the window
and whats ubuntu

It's a different operating system. Are you using Linux (Ubuntu) or Windows? There's two sections of my guide to setup SRL. If you're using Windows, you want to use the Windows section.

From: R1ch
Cheers. Hopefully I'll get a nice long one over the next couple of days.

One little thing I've noticed though is that although I enter my stats details correctly (double & triple checked) I still get told that I'm entering them wrong. Maybe something new appeared whilst I was AWOL that you could link me to?

Richard.

Hmm not sure. I've never had that problem. I'm assuming you've registered at this site? -> http://scriptmanager.freehostia.com/index.php

@Caza: Awesome report! I'm glad this is working well again. :)

ali_n_5

2010-04-23 19:22:04

OMG Coh3n U R AWESOME IT FINALLY WORKED!!!!!! but ummm why does it collect oaks near the jail it would be better to collect oaks right beside the bank because theres only 2 other trees beside that one so less chance to get normall logs although i only got 2 normals and rest were oak so its still AWESOME!!!!

Coh3n

2010-04-23 19:42:36

From: ali_n_5
OMG Coh3n U R AWESOME IT FINALLY WORKED!!!!!! but ummm why does it collect oaks near the jail it would be better to collect oaks right beside the bank because theres only 2 other trees beside that one so less chance to get normall logs although i only got 2 normals and rest were oak so its still AWESOME!!!!

No problem :)

I chose the location near the jail because there's 2 trees there, where as there's only one at the bank. I'm debated whether to add the closer location depending on combat level, but that's for the future (IF I decide to add it).

Be sure to post some proggys for Oaks. I don't get a lot of people using that part of the script.

ali_n_5

2010-04-23 19:42:38

I just noticed smthing: As soon as the deposit all button is pressed the character starts to run to the next spot maybe have it like examine the money to see the ammount u have and like look around the bank for 5 seconds to not get banned because noone has reflexes that are that good lol.

ali_n_5

2010-04-23 19:44:57

And i am also wondering what happens if the axe breaks and if the tree comes alive or if smone takes u away like a special event… what happens?

Coh3n

2010-04-23 19:47:06

From: ali_n_5
I just noticed smthing: As soon as the deposit all button is pressed the character starts to run to the next spot maybe have it like examine the money to see the ammount u have and like look around the bank for 5 seconds to not get banned because noone has reflexes that are that good lol.

Hmm, I didn't realize it was that fast. Thanks.

From: ali_n_5
And i am also wondering what happens if the axe breaks and if the tree comes alive or if smone takes u away like a special event… what happens?

There's no event that breaks the axe anymore. The trees don't come alive either. The other random events are handled by SRL. Some get solved, some don't.

Also, try not to double post. Just edit the original one. ;)

ali_n_5

2010-04-23 20:08:16

ali_n_5

2010-04-23 21:26:41

Press Play

2010-04-24 03:22:22

Another proggy. Doing well (Y)

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 55 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 1 Hours, 51 Minutes and 58 Seconds     |
|                                                    |
|    Player:   xxx                           |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 30                                |
|      Logs Cut:   810                               |
|      Logs P/H:   434                               |
|      Levels Up:  1                                 |
|      Experience: 54,675                            |
|      Breaks:     1                                 |
|____________________________________________________|
|____________________________________________________/

Stopped because:

***** STR: FOUND RANDOM: 'Cap'n Arnav' *****
84
Could not identify arnav objects!
***** STR: 'Cap'n Arnav' RANDOM SOLVING FAILED! *****

Rich

2010-04-24 05:59:21

From: Coh3n
Hmm not sure. I've never had that problem. I'm assuming you've registered at this site? -> http://scriptmanager.freehostia.com/index.php

Yep, I'm using the ID and password for that site in the script, but it whenever i enter the details (correctly) it still tells me that I've entered them wrong.

Coh3n

2010-04-24 09:47:27

From: ali_n_5
K heres the real progress. and after it closed down it didnt restart was it suposed to or no?

Again, try not to double post. :p

And after it stops, you have to tell it to start again…

From: R1ch
Yep, I'm using the ID and password for that site in the script, but it whenever i enter the details (correctly) it still tells me that I've entered them wrong.

Not sure. I remember reading that another person had that problem. I'm not sure what they said though. I would ask Nielsie about it.

@daaz: Those damn randoms!

Press Play

2010-04-24 10:07:32

From: R1ch
Yep, I'm using the ID and password for that site in the script, but it whenever i enter the details (correctly) it still tells me that I've entered them wrong.

Lol, I have this problem too :( It's annoying, but at least the script still works.

A VERY good single player proggy :) It says it failed to find trees; ~~I will check the location and check where the character is and post HERE.~~ Player was in the maze random. (EDIT)

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 55 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 6 Hours, 14 Minutes and 28 Seconds     |
|                                                    |
|    Player:   xxx                           |
|    Location: Lost                                  |
|    Active:   False                                 |
|    Reason:   Failed to find trees 60 times         |
|      Tree Type:  Willow                            |
|      Loads Done: 97                                |
|      Logs Cut:   2,619                             |
|      Logs P/H:   419                               |
|      Levels Up:  3                                 |
|      Experience: 176,782                           |
|      Breaks:     3                                 |
|____________________________________________________|
|____________________________________________________/

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 38 Randoms Report    |
|       [url]www.villavu.com[/url]        |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Lamps Solved      :        1 |
| Leo's Solved      :        1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

From level ~~61 to 64,~~ 64 to 66 (EDIT-I was wrong lol)
419 logs/hr !

NICEE!!

Rich

2010-04-24 11:39:18

Got this:

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 55 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 3 Hours, 27 Minutes and 17 Seconds     |
|                                                    |
|    Player:                               |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 49                                |
|      Logs Cut:   1,372                             |
|      Logs P/H:   397                               |
|      Levels Up:  1                                 |
|      Experience: 92,610                            |
|      Breaks:     2                                 |
|____________________________________________________|
|____________________________________________________/

But ended because of:

[Runtime Error] : Exception: Access violation at address 006CE72A in module 'scar.exe'. Read of address FFFFFFFF in line 275 in script C:\Users\Richard\Documents\Documents\SCAR\includes\SRL\SRL\Core\Text.scar

So far got me from level 66 to 72. Going for 99 :)

Sgt Soul

2010-04-24 12:03:31

time flies when using this script, it got me to lvl 99. I hope you achieve it also :)
I seem to get a lot of runtime errors with all the scripts I use :S its becoming common :( oh wells it is still better than playing legit :P

Rich

2010-04-24 12:09:55

Maybe I should try it on Simba.

mikevskater

2010-04-24 12:38:17

By far, one of the best forms i have EVER seen, i love it

(running script now, will post proggy later)

Coh3n

2010-04-24 14:05:05

From: -daazndagger-
Lol, I have this problem too :( It's annoying, but at least the script still works.

A VERY good single player proggy :) It says it failed to find trees; I will check the location and check where the character is and post HERE.

From level 61 to 64,
419 logs/hr !

NICEE!!

Very nice! I'm going to add that to the first post.

From: R1ch
So far got me from level 66 to 72. Going for 99 :)

Good luck, and yeah, I got a lot of runtime errors also, then I switched to Simba. :)

From: mikevskater
By far, one of the best forms i have EVER seen, i love it

(running script now, will post proggy later)

Thanks! I spent wayyy too much time on it. :p

Rich

2010-04-24 18:17:56

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 55 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 4 Hours, 43 Minutes and 45 Seconds     |
|                                                    |
|    Player:                                |
|    Location: Willows                               |
|    Active:   False                                 |
|    Reason:                                         |
|      Tree Type:  Willow                            |
|      Loads Done: 66                                |
|      Logs Cut:   1,848                             |
|      Logs P/H:   390                               |
|      Levels Up:  1                                 |
|      Experience: 124,740                           |
|      Breaks:     3                                 |
|____________________________________________________|
|____________________________________________________/

Stopped because of Freaky Forester.

Press Play

2010-04-25 04:33:23

Another small single player proggy:

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 38 Randoms Report    |
|       [url]www.villavu.com[/url]        |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Lamps Solved      :        1 |
| Pillory's Solved  :        1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 55 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 2 Hours, 5 Minutes and 0 Seconds       |
|                                                    |
|    Player:   xxx                           |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 32                                |
|      Logs Cut:   864                               |
|      Logs P/H:   414                               |
|      Levels Up:  1                                 |
|      Experience: 58,320                            |
|      Breaks:     1                                 |
|____________________________________________________|
|____________________________________________________/

Stopped because it was in a "Quiz" random.

Coh3n

2010-04-25 11:22:29

Thanks for the reports guys, keep em' coming! :)

mysterious123

2010-04-25 13:29:50

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 55 - |
|====================================================|
| |
| Program: SCAR |
| SMART: Yes |
| Ran For: 2 Hours, 24 Minutes and 5 Seconds |
| |
| Player: ***** |
| Location: Bank |
| Active: True |
| Tree Type: Willow |
| Loads Done: 32 |
| Logs Cut: 864 |
| Logs P/H: 359 |
| Levels Up: 3 |
| Experience: 58,320 |
| Breaks: 0 |
|____________________________________________________|
|____________________________________________________/
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 55 - |
|====================================================|
| |
| Program: SCAR |
| SMART: Yes |
| Ran For: 2 Hours, 36 Minutes and 44 Seconds |
| |
| Player: **** |
| Location: Willows |
| Active: False |
| Reason: |
| Tree Type: Willow |
| Loads Done: 32 |
| Logs Cut: 864 |
| Logs P/H: 330 |
| Levels Up: 3 |
| Experience: 58,320 |
| Breaks: 0 |
|____________________________________________________|
|____________________________________________________/

Stopped due to sandwich lady.

Coh3n

2010-04-25 17:35:40

Hmm I wonder why it didn't give a False Reason…

I'll have to look at that later.

mikevskater

2010-04-25 22:42:48

From: Coh3n

Thanks! I spent wayyy too much time on it. :p

Yeah i could tell, its stupid good xD

Coh3n

2010-04-26 00:40:02

Thanks! :)

Press Play

2010-04-26 04:40:29

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 38 Randoms Report    |
|       [url]www.villavu.com[/url]        |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs          :        9 |
| Frog Missed       :        1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
|                         Coh3n's Draynor Chop N' Bank!                               |
|                                - Revision 55 -                                      |
|=====================================================================================|
|                                                                                     |
|                    Ran For: 5 Hours, 12 Minutes and 16 Seconds                      |
|                             Program: SCAR | SMART: Yes                              |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads |  Tree  | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| ***  | False  | Lost     |  16   | Willow |  432     |   0    |  29,160    |   0    |
| ***  | True   | Bank     |  19   | Willow |  513     |   5    |  34,628    |   0    |
| ***  | True   | Bank     |  28   | Willow |  756     |   10   |  51,030    |   2    |
| ***  | True   | Willows  |  0    | Oak    |  0       |   0    |  0         |   0    |
|-------------------------------------------------------------------------------------|
| Totals:                  |  63   |        |  1,701   |   15   |  114,818   |   2    |
|_____________________________________________________________________________________|
|                                                                                     |
| False Reasons:                                                                      |
| ¯¯¯¯¯¯¯¯¯¯¯¯¯¯                                                                      |
|   0:  -> Failed to find hatchet                                                     |
|_____________________________________________________________________________________/

First player WAS in the frog random. so srl obviously didnt 'miss' it. I solved the random and fixed it up by script manager, but somehow i don't think it worked.
It stopped because second player got stuck in a "molly" random and it started solving it but failed? Because I found that player logged out but in the lobby. I had to stop it manually because the script had nowhere to go.
I found it did this with some of my other runs: It finds a random, then says: 'could be in a possible random', then the script just stops doing anything.
Last player, I think "could not find hatchet", even though it was set up properly. Maybe ill level it up and try it on oaks.
Will test again soon :)

-daazndagger-

Rich

2010-04-26 10:57:25

Script Manager? Could you enlighten me please? This is probably something that happened whilst I was away.

Thanks.

Coh3n

2010-04-26 11:03:52

From: -daazndagger-
First player WAS in the frog random. so srl obviously didnt 'miss' it. I solved the random and fixed it up by script manager, but somehow i don't think it worked.
It stopped because second player got stuck in a "molly" random and it started solving it but failed? Because I found that player logged out but in the lobby. I had to stop it manually because the script had nowhere to go.
I found it did this with some of my other runs: It finds a random, then says: 'could be in a possible random', then the script just stops doing anything.
Last player, I think "could not find hatchet", even though it was set up properly. Maybe ill level it up and try it on oaks.
Will test again soon :)

-daazndagger-

I'm not sure why it wouldn't find the hatchet, but the other problems look like they're within the SRL randoms solving.

From: R1ch
Script Manager? Could you enlighten me please? This is probably something that happened whilst I was away.

Thanks.

I think he's talking about Stats. If a player gets stuck in a random and becomes false, and the script is still running on another player, you can log into the first player, solve the random, put him in the right location, and turn him true again.

Rich

2010-04-26 16:39:25

Hey Coh3n, I hope you don't mind me posting this, but if you want me to delete it, just let me know.

I was looking at Trilez's WillDrop earlier on, and noticed his wrote on SMART. I've implemented this into your script (pretty much Trilez's code - credits go to him), without messing your script up.

It also asks whether you would like to use it or not, but that's only a simple GetApplication. If you like it, and want to keep it, you might be able to add it into your form. One thing I've noticed is is that it only works in SCAR.

Picture:

Richard.

Coh3n

2010-04-26 16:42:35

From: R1ch
Hey Coh3n, I hope you don't mind me posting this, but if you want me to delete it, just let me know.

I was looking at Trilez's WillDrop earlier on, and noticed his wrote on SMART. I've implemented this into your script (pretty much Trilez's code - credits go to him), without messing your script up.

It also asks whether you would like to use it or not, but that's only a simple GetApplication. If you like it, and want to keep it, you might be able to add it into your form. One thing I've noticed is is that it only works in SCAR.

Picture:

Richard.

Oo that's cool. :)

I probably won't be adding it to my form, simply because that would require me to rearrange a whole bunch of stuff and make some new images in GIMP (which I barely know how to use since I used Photoshop for the form), which I simply do not have the time to do. If I were to add it, I would just add a constant to where you choose whether to use the form or not.

Also, what's the black triangle?

Thanks,
Coh3n

Rich

2010-04-26 17:31:37

The black triangle is me just blocking out my character :)

PS: Add it! :p

Coh3n

2010-04-26 23:31:19

From: R1ch
The black triangle is me just blocking out my character :)

PS: Add it! :p

Ohh okay. :p

And I think I will add it… eventually. I'm going to be busy the next few days, but I want to look into it more and see about some more customization. I already made the form the best I can, I may as well do the same with the script. :)

Rich

2010-04-27 02:31:28

Okies. :)

EDIT: Running it now with SMART Debug on, and it's showing around 430 logs per hour, which is no different without SMART Debug. Just saying because I was unsure on whether it would slow down the chopping.

EDIT2: Got a player chopping Oaks, but he ran to the Willows. :s

Coh3n

2010-04-27 09:57:16

From: R1ch
Okies. :)

EDIT: Running it now with SMART Debug on, and it's showing around 430 logs per hour, which is no different without SMART Debug. Just saying because I was unsure on whether it would slow down the chopping.

EDIT2: Got a player chopping Oaks, but he ran to the Willows. :s

Hmm.. I'm assuming you've set the player properly to cut Oaks, so are you using the form or DeclarePlayers?

Rich

2010-04-27 10:26:39

I'm using the form, and yes I set it to cut Oaks. I was running the script with SMART Debug, so I was unsure whether it was because of me slightly changing it, but then I ran the normal version, and it done the same.

mysterious123

2010-04-27 11:21:08

I tried setting it to cut oaks, it worked, though since it goes to that oak which the guards sometimes reach, the character died.

Maybe adding an option to just cut the one oak near the bank would solve the death problem. (Although it might be slower)

Coh3n

2010-04-27 11:42:37

From: mysterious123
I tried setting it to cut oaks, it worked, though since it goes to that oak which the guards sometimes reach, the character died.

Maybe adding an option to just cut the one oak near the bank would solve the death problem. (Although it might be slower)

Did you use the form? And are you using SCAR or Simba?

And yeah, I've thought about adding that option for lower level players. It something I'd like to add in the future.

E: I just testing in both SCAR and Simba, and they both worked fine. Sorry Rich, I don't know what to tell you. :confused:

mysterious123

2010-04-27 11:50:36

From: Coh3n
Did you use the form? And are you using SCAR or Simba?

And yeah, I've thought about adding that option for lower level players. It something I'd like to add in the future.

I used the form with Scar.

Is there a difference? I mean, does it work better on Simba?

Coh3n

2010-04-27 11:54:54

From: mysterious123
I used the form with Scar.

Is there a difference? I mean, does it work better on Simba?

In my experience, it works much better in Simba. :)

Rich

2010-04-27 16:54:11

From: Coh3n
In my experience, it works much better in Simba. :)

And mine! :D

Coh3n

2010-04-27 17:19:58

Raskolnikov

2010-04-27 18:49:37

Coh3n

2010-04-28 10:33:13

Nice report. I'll add it to the first page. :)

Cazabacca

2010-04-28 14:50:36

There is something wrong with SRL atm, both POMS Essence Miner and this do the same thing for me. Mouse keeps spamming between Inventory tab and the music tab over and over again whenever the mouse is free of other things (clicking on a a tree, banking, w/e).

Wouldn't really call that antiban. :P

Coh3n

2010-04-28 14:54:25

From: Cazabacca
There is something wrong with SRL atm, both POMS Essence Miner and this do the same thing for me. Mouse keeps spamming between Inventory tab and the music tab over and over again whenever the mouse is free of other things (clicking on a a tree, banking, w/e).

Wouldn't really call that antiban. :P

That problem arose a while back. SRL hits the music tab as a second check for randoms. So I think SRL thinks it's in a random when it's not, so that's what causes that bug.

BlueWorld

2010-04-29 05:18:23

SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.
Error: Exception: Access violation at line 108
The following DTMs were not freed: [SRL - Lamp bitmap]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap]
File[D:\Simba\Includes\SRL\Logs\SRL Log 28-04-10 0.txt] has not been freed in the script, freeing it now.

mastaraymond

2010-04-29 05:23:19

From: Coh3n
Here's a report I got cutting Oaks. It stopped because he cut the amount of logs specified. I'm not exactly sure why it didn't print off the final report.
[PHP]
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 55 - |
|====================================================|
| |
| Program: Simba |
| SMART: Yes |
| Ran For: 2 Hours, 16 Minutes and 2 Seconds |
| |
| Player: ************ |
| Location: Bank |
| Active: True |
| Tree Type: Oak |
| Loads Done: 35 |
| Logs Cut: 973 |
| Logs P/H: 429 |
| Levels Up: 0 |
| Experience: 36,488 |
| Breaks: 3 |
|____________________________________________________|
|____________________________________________________/
[/PHP]

Because the 'ScriptTerminate' procedure doesn't work that way in Simba.. You need to add it using a different technique; see SetupSRL for that.

EDIT: Added a nice wrapper 'AddOnTerminate' to SRL; Will commit with the next release of Simba.

EDIT2: A lil suggestion; Could you make it detect whether it's at the willows or the bank @ start? I'm 2 lazy to move my char to the bank everytime :D.

Coh3n

2010-04-29 08:13:23

From: mastaraymond
Because the 'ScriptTerminate' procedure doesn't work that way in Simba.. You need to add it using a different technique; see SetupSRL for that.

EDIT: Added a nice wrapper 'AddOnTerminate' to SRL; Will commit with the next release of Simba.

EDIT2: A lil suggestion; Could you make it detect whether it's at the willows or the bank @ start? I'm 2 lazy to move my char to the bank everytime :D.

I guess that would explain it. :p

And yeah, I would have added player locations to the DeclarePlayers if it wasn't such a pain to edit the form. Have any other suggestions on how to detect this? I was thinking maybe a distance check from the bank symbol or fishing symbol.

mastaraymond

2010-04-29 16:13:04


[5:34:54]: /====================================================|
[5:34:54]: |           Coh3n's Draynor Chop N' Bank!            |
[5:34:54]: |                  - Revision 55 -                   |
[5:34:54]: |====================================================|
[5:34:54]: |                                                    |
[5:34:54]: |    Program: Simba                                  |
[5:34:54]: |    SMART:   Yes                                    |
[5:34:54]: |    Ran For: 5 Hours, 34 Minutes and 54 Seconds     |
[5:34:54]: |                                                    |
[5:34:54]: |    Player:   ****                          |
[5:34:54]: |    Location: Bank                                  |
[5:34:54]: |    Active:   True                                  |
[5:34:54]: |      Tree Type:  Willow                            |
[5:34:54]: |      Loads Done: 107                               |
[5:34:54]: |      Logs Cut:   2,996                             |
[5:34:54]: |      Logs P/H:   536                               |
[5:34:54]: |      Levels Up:  0                                 |
[5:34:54]: |      Experience: 202,230                           |
[5:34:54]: |      Breaks:     0                                 |
[5:34:54]: |____________________________________________________|
[5:34:54]: |____________________________________________________/

Stopped because it didn't detect the random.. Does it look for randoms when it can't find a tree? Because I'm not sure if it did.

E: Just make an option Bank/Willows/Auto detect.. Distance to fishing symbol would do the trigger, yea :).

Coh3n

2010-04-30 08:57:54

From: mastaraymond

Stopped because it didn't detect the random.. Does it look for randoms when it can't find a tree? Because I'm not sure if it did.

E: Just make an option Bank/Willows/Auto detect.. Distance to fishing symbol would do the trigger, yea :).

I'm adding that report to the first page. :)

And yes, it does check for randoms if a tree isn't found. It also checks if the uptext isn't found after a certain amount of tries.

mastaraymond

2010-04-30 08:59:00

From: Coh3n
I'm adding that report to the first page. :)

And yes, it does check for randoms if a tree isn't found. It also checks if the uptext isn't found after a certain amount of tries.

Yeah :). Evil bob detection was just broken :redface:

Coh3n

2010-04-30 09:00:48

From: mastaraymond
Yeah :). Evil bob detection was just broken :redface:

Ah okay. I think I'm also going to add the debug times, like you have in your proggys. :)

mastaraymond

2010-04-30 09:04:52

From: Coh3n
Ah okay. I think I'm also going to add the debug times, like you have in your proggys. :)

Simba-feature :staycool:


procedure Setup_Script;
var
  i: Integer;
begin
  {$IFDEF SIMBA}
    ClearDebug;
    Writeln('Thank you for using Draynor Chop N'' Bank - Simba version!');
    SetScriptProp(SP_WriteTimeStamp,[true]);

Coh3n

2010-04-30 09:07:40

From: mastaraymond
Simba-feature :staycool:


procedure Setup_Script;
var
  i: Integer;
begin
  {$IFDEF SIMBA}
    ClearDebug;
    Writeln('Thank you for using Draynor Chop N'' Bank - Simba version!');
    SetScriptProp(SP_WriteTimeStamp,[true]);

Oh lol, I was just going to add this to the debug procedure:


time := '[' + TheTime + ']';

E: I've added player location detection in the latest version. :) I haven't tested it for a long run, but it's only called at the start of the script, and it's worked every time. :)

Also note that from now on, this script will be maintained with Simba. It will most likely work in SCAR, but I'm letting you know just in case. I recommend using Simba anyway since it seems to work way better. :D

TomTuff

2010-05-01 18:12:31

Coh3n

2010-05-02 11:12:18

From: TomTuff
major banking problems again, it only did 1 load so not even posting the prog x)

What'd the debug say? Also make sure you color settings are set properly. Is anyone else having this problem?

TomTuff

2010-05-02 21:14:10

haha well maybe i'm just an absolute noob, where/what do i change color settings? Is it in the script?

Coh3n

2010-05-02 22:19:48

From: TomTuff
haha well maybe i'm just an absolute noob, where/what do i change color settings? Is it in the script?

Sorry, I should have been more descriptive. I think your computer settings have to be on 32-bit true color. I'll test the script right now though, maybe the booth colours got changed.

E: Seems to be working perfect for me.

mastaraymond

2010-05-03 06:30:49

I think you forgot your SRL ID + pass in there.

Coh3n

2010-05-03 09:13:17

From: mastaraymond
I think you forgot your SRL ID + pass in there.

Thanks, fixed in revision 58.

mastaraymond

2010-05-03 12:33:59

          Report_Print;
          SRLRandomsReport;

Please :P. I want to see the randoms report as well (as Simba user ;)).


/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 56 -                   |
|====================================================|
|                                                    |
|    Program: Simba                                  |
|    SMART:   Yes                                    |
|    Ran For: 5 Hours, 57 Minutes and 10 Seconds     |
|                                                    |
|    Player:   ****                          |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 104                               |
|      Logs Cut:   2,912                             |
|      Logs P/H:   489                               |
|      Levels Up:  0                                 |
|      Experience: 196,560                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

(Oh and I like my timing function (for the writeln) more, as it indicated Time Running instead of the Local time)

Coh3n

2010-05-03 15:10:59

From: mastaraymond

(Oh and I like my timing function (for the writeln) more, as it indicated Time Running instead of the Local time)

Oh wow I didn't even notice that. :p I like that better also, I'll change that for the next version.

About the randoms report, as far as I know it prints in the report box, and since Simba doesn't have one, I would get an error. That's why I excluded it from the Simba version in the first place.

Cazabacca

2010-05-03 16:10:34

I just lost a 9h progress report…. "scar.exe has stopped working properly"…. anyways, i just wanted to express my depression.

Coh3n

2010-05-03 16:11:07

From: Cazabacca
I just lost a 9h progress report…. "scar.exe has stopped working properly"…. anyways, i just wanted to express my depression.

On one player!? That's so awesome, yet so upsetting…

Cazabacca

2010-05-03 16:11:49

From: Coh3n
On one player!? That's so awesome, yet so upsetting…

Nah, 2 players. But still. :(

Coh3n

2010-05-03 16:12:28

From: Cazabacca
Nah, 2 players. But still. :(

Still a good run. :)

sk8rjess

2010-05-04 23:22:03

works great but it needs to detect if the player is being attacked, and if so then run. i had a lvl 21 die and the script logged out

Cazabacca

2010-05-05 05:56:05

From: sk8rjess
works great but it needs to detect if the player is being attacked, and if so then run. i had a lvl 21 die and the script logged out

How do you manage to kill your player at draynor willows? :p

E: Or were you at oaks and the jail guards killed you?

sk8rjess

2010-05-05 09:03:10

yeah, the oaks lol. and he got stuck at the graveyard random

mysterious123

2010-05-05 10:55:43

I tried running the script in Simba and got this: Exception in Script: Unable to find file 'SRL\SRL\misc\Smart.scar' used from ''
doesn't exist

Also, I had to show "All files" because the file type is .scar and not simba.

I'm not sure, how am I supposed to get this script to work through Simba?

Coh3n

2010-05-05 12:05:22

From: sk8rjess
works great but it needs to detect if the player is being attacked, and if so then run. i had a lvl 21 die and the script logged out

It's pointless to run because it'll just attack you the second you move back. I'd have to add a different location to cut willows for lower level players, and unless I get some more time, I don't see that happening any time soon, sorry.

From: mysterious123
I tried running the script in Simba and got this: Exception in Script: Unable to find file 'SRL\SRL\misc\Smart.scar' used from ''
doesn't exist

Also, I had to show "All files" because the file type is .scar and not simba.

I'm not sure, how am I supposed to get this script to work through Simba?

You have to make sure you have SRL installed in the Simba directories. So you'd install SRL to Simba/Includes/ and move just the Simba plugins to Simba/Plugins/.

Cazabacca

2010-05-05 16:18:59

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 38 Randoms Report    |
|       [url]www.villavu.com[/url]        |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs          :       17 |
| Lamps Solved      :        3 |
| Molly's Solved    :        2 |
| Beekeepers Solved :        1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
|                         Coh3n's Draynor Chop N' Bank!                               |
|                                - Revision 58 -                                      |
|=====================================================================================|
|                                                                                     |
|                    Ran For: 10 Hours, 26 Minutes and 25 Seconds                     |
|                             Program: SCAR | SMART: Yes                              |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads |  Tree  | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| wc1 | True   | Bank     |  66   | Willow |  1,848   |   2    |  124,740   |   7    |
| wc2 | True   | Lost      |  37   | Willow |  999      |   3    |  67,432     |   3    |
| wc3 | True   | Bank     |  65   | Willow |  1,755   |   3    |  118,462   |   6    |
|-------------------------------------------------------------------------------------|
| Totals:                  |  168  |        |  4,602   |   8    |  310,634   |   16   |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/

;)

Wc2 character was "lost" and when I logged in to check it out it was stading in the bank with a full load of logs. Prolly just didn't find the booth for some reason.

Manually stopped.

Coh3n

2010-05-05 17:41:46

From: Cazabacca

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 38 Randoms Report    |
|       [url]www.villavu.com[/url]        |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs          :       17 |
| Lamps Solved      :        3 |
| Molly's Solved    :        2 |
| Beekeepers Solved :        1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
|                         Coh3n's Draynor Chop N' Bank!                               |
|                                - Revision 58 -                                      |
|=====================================================================================|
|                                                                                     |
|                    Ran For: 10 Hours, 26 Minutes and 25 Seconds                     |
|                             Program: SCAR | SMART: Yes                              |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads |  Tree  | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| wc1 | True   | Bank     |  66   | Willow |  1,848   |   2    |  124,740   |   7    |
| wc2 | True   | Lost      |  37   | Willow |  999      |   3    |  67,432     |   3    |
| wc3 | True   | Bank     |  65   | Willow |  1,755   |   3    |  118,462   |   6    |
|-------------------------------------------------------------------------------------|
| Totals:                  |  168  |        |  4,602   |   8    |  310,634   |   16   |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/

;)

Wc2 character was "lost" and when I logged in to check it out it was stading in the bank with a full load of logs. Prolly just didn't find the booth for some reason.

Manually stopped.

I don't know why that happens, but nice report. I'm adding it to the first post. :)

Rizowski

2010-05-07 16:06:28

Not too bad, it for some reason decided that it could not make it to the bank, even though i watched it successfully do so.

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 38 Randoms Report    |
|       [url]www.villavu.com[/url]        |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 58 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 37 Minutes and 2 Seconds               |
|                                                    |
|    Player:   Aplayer                                |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 12                                |
|      Logs Cut:   334                               |
|      Logs P/H:   541                               |
|      Levels Up:  0                                 |
|      Experience: 22,545                            |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 58 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 39 Minutes and 39 Seconds              |
|                                                    |
|    Player:   a player                                |
|    Location: Lost                                  |
|    Active:   False                                 |
|    Reason:   Failed to walk to location: Bank      |
|      Tree Type:  Willow                            |
|      Loads Done: 12                                |
|      Logs Cut:   334                               |
|      Logs P/H:   505                               |
|      Levels Up:  0                                 |
|      Experience: 22,545                            |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

Press Play

2010-05-08 04:30:34

Here's some proggies:

[PHP]/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 56 - |
|=====================================================================================|
| |
| Ran For: 1 Hours, 28 Minutes and 13 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| *** | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| *** | False | Lost | 23 | Willow | 621 | 1 | 41,918 | 1 |
|————————————————————————————-|
| Totals: | 23 | | 621 | 1 | 41,918 | 1 |
|_____________________________________________________________________________________|
| |
| False Reasons: |
| ¯¯¯¯¯¯¯¯¯¯¯¯¯¯ |
| 0: *** -> |
| 1: *** -> Failed to walk to location: Bank |
|_____________________________________________________________________________________/
[/PHP]
I set the first player to false at the start as I wasn't using it.

[11:35:41 AM]: ERROR: Walk_PerformIndex: Failed to walk to location: Bank
NextPlayer
SwitchToPlayer(PlayerNo: 1, Active: False);
Player is not Active...
All players not active!

Coh3n

2010-05-09 18:29:26

Lol, that wasn't a long post. :p

And I don't know why it doesn't detect that it walked to the bank. There may be an issue with SRL's IsMoving or FlagPresent functions.

Press Play

2010-05-10 06:34:44

From: Coh3n
Lol, that wasn't a long post. :p

And I don't know why it doesn't detect that it walked to the bank. There may be an issue with SRL's IsMoving or FlagPresent functions.

Lol; but it was longer than everyone else's hahaa :P

Maybe you could increase the range of time to wait within the "Walk_WaitWhile" function? Because Runescape may have lagged or something?

But you're probably right. It's probably SRL's s IsMoving or FlagPresent functions.

BTW: I was going for a 7 hour proggy but I came back to my computer and SCAR was closed :| I should try simba some time…

Coh3n

2010-05-10 10:47:08

From: -daazndagger-
Lol; but it was longer than everyone else's hahaa :P

Maybe you could increase the range of time to wait within the "Walk_WaitWhile" function? Because Runescape may have lagged or something?

But you're probably right. It's probably SRL's s IsMoving or FlagPresent functions.

BTW: I was going for a 7 hour proggy but I came back to my computer and SCAR was closed :| I should try simba some time…

Yes, try Simba. Everyone who's getting these errors seem to be using SCAR. I just got this report using Simba. Stopped because it cut the specified number of logs. It just didn't print the last report as Simba's ScriptTerminate works differently. I think raymond may have fixed that, I have to update both Simba and SRL.
[PHP]
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 58 - |
|====================================================|
| |
| Program: Simba |
| SMART: Yes |
| Ran For: 4 Hours, 56 Minutes and 5 Seconds |
| |
| Player: |
| Location: Bank |
| Active: True |
| Tree Type: Willow |
| Loads Done: 71 |
| Logs Cut: 1,988 |
| Logs P/H: 402 |
| Levels Up: 0 |
| Experience: 134,190 |
| Breaks: 5 |
|____________________________________________________|
|____________________________________________________/
[/PHP]

fre

2010-05-12 08:46:40

Here a proggy, i assume it can run way longer, but sometimes my internet connection fails.
And then the scritp get stuck. to bad

/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 58 - |
|=====================================================================================|
| |
| Ran For: 3 Hours, 19 Minutes and 59 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| pk3r | True | Bank | 13 | Willow | 351 | 1 | 23,692 | 6 |
| pke | True | Willows | 17 | Willow | 459 | 2 | 30,982 | 7 |
| pkr | False | Lost | 10 | Willow | 270 | 0 | 18,225 | 5 |
|————————————————————————————-|
| Totals: | 40 | | 1,080 | 3 | 72,899 | 18 |
|_____________________________________________________________________________________|
| |
| False Reasons: |
| ¯¯¯¯¯¯¯¯¯¯¯¯¯¯ |
| 2: pke -> Failed to find hatchet |
|_____________________________________________________________________________________/

Cazabacca

2010-05-12 08:54:26

/=====================================================================================|
|                         Coh3n's Draynor Chop N' Bank!                               |
|                                - Revision 58 -                                      |
|=====================================================================================|
|                                                                                     |
|                    Ran For: 6 Hours, 34 Minutes and 21 Seconds                      |
|                             Program: SCAR | SMART: Yes                              |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads |  Tree  | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| xxx | False  | Lost     |  35   | Willow |  980     |   0    |  66,150    |   4    |
| xxx | False  | Lost     |  38   | Willow |  1,026   |   1    |  69,255    |   3    |
| xxx | False  | Lost     |  28   | Willow |  756     |   1    |  51,030    |   2    |
|-------------------------------------------------------------------------------------|
| Totals:                  |  101  |        |  2,762   |   2    |  186,435   |   9    |
|_____________________________________________________________________________________|
|                                                                                     |
| False Reasons:                                                                      |
| ¯¯¯¯¯¯¯¯¯¯¯¯¯¯                                                                      |
|   0: xxx -> Failed to find trees 60 times                                          |
|   1: xxx -> Failed to open bank after 40 tries                                     |
|   2: xxx -> Failed to find trees 60 times                                          |
|_____________________________________________________________________________________/

Just. Pure. Awesomeness.

My fav script at the moment.

mastaraymond

2010-05-12 09:10:07

From: Coh3n
Yes, try Simba. Everyone who's getting these errors seem to be using SCAR. I just got this report using Simba. Stopped because it cut the specified number of logs. It just didn't print the last report as Simba's ScriptTerminate works differently. I think raymond may have fixed that, I have to update both Simba and SRL.

Add these lines somewhere:


  {$ifdef Simba}
  AddOnTerminate('ScriptTerminate');
  {$endif}

Frement

2010-05-12 09:13:46

From: mastaraymond
Add these lines somewhere:
  {$ifdef Simba}
  AddOnTerminate('ScriptTerminate');
  {$endif}  

Nice! :) Will be adding these for now on.

Coh3n

2010-05-12 10:30:13

Still a good run. :)

Goobs

2010-05-16 18:58:39

/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 58 - |
|=====================================================================================|
| |
| Ran For: 4 Hours, 22 Minutes and 26 Seconds |
| Program: Simba | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|?? ?? ??? ?? ?? ??? ?? ??? ??|
| odss | True | Bank | 24 | Willow | 672 | 0 | 45,360 | 6 |
| njin | False | Lost | 19 | Willow | 513 | 1 | 34,628 | 5 |
| ldor | False | Lost | 19 | Willow | 532 | 2 | 35,910 | 5 |
|————————————————————————————-|
| Totals: | 62 | | 1,717 | 3 | 115,898 | 16 |
|_____________________________________________________________________________________|
| |
| False Reasons: |
| ???? |
| 1: njin -> Failed to find uptext 60 times |
| 2: ldor -> Failed to find trees 60 times |
|_____________________________________________________________________________________/

Love the script =D. A couple of times, it was looking for the bank before it walked there. Same with searching for trees before it walked there. Hmm. Great otherwise =D.

Frement

2010-05-16 19:22:13

Banking is a bit slow, takes time to close the screen and then walking to the trees again. Also it clicks on the tree twice, is there some reason for it? Maybe you could make some function to follow the tree when moving. Or just remove the second click. Other then that, i still love it :)

The banking might be only for me, dont know.

Coh3n

2010-05-16 20:56:56

From: ProphesyOfWolf

Love the script =D. A couple of times, it was looking for the bank before it walked there. Same with searching for trees before it walked there. Hmm. Great otherwise =D.

I'm going to update that walking right now.

From: Frement
Banking is a bit slow, takes time to close the screen and then walking to the trees again. Also it clicks on the tree twice, is there some reason for it? Maybe you could make some function to follow the tree when moving. Or just remove the second click. Other then that, i still love it :)

The banking might be only for me, dont know.

Not sure why the banking would be slow, and my method for detecting whether the tree is cut down or not isn't perfect so it sometimes thinks the tree's down when it's not. I'll look at the banking now, and I'll try to update the tree down detecting later. :)

Thanks for the feedback guys.

E: Please update the revision 59, I've made a few updates. :)

Frement

2010-05-17 08:56:56

Heres my proggy for tonights run :)
[PHP]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 8 |
| Sandwiches Missed : 1 |
| Lamps Solved : 3 |
| Frog Solved : 1 |
| Molly's Solved : 1 |
| Mordauts Missed : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 58 - |
|=====================================================================================|
| |
| Ran For: 8 Hours, 54 Minutes and 48 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| WC#01| False | Lost | 64 | Willow | 1,727 | 2 | 116,572 | 1 |
| WC#02| False | Lost | 73 | Willow | 1,971 | 1 | 133,042 | 3 |
|————————————————————————————-|
| Totals: | 137 | | 3,698 | 3 | 249,614 | 4 |
|_____________________________________________________________________________________|
| |
| False Reasons: |
| ¯¯¯¯¯¯¯¯¯¯¯¯¯¯ |
| 0: WC#01 -> Failed to find hatchet |
| 1: WC#02 -> Failed to walk to location: Bank |
|_____________________________________________________________________________________/[/PHP]

I'm surprised they solved almost all of the randoms, had to solve Mordaut myself, but other then that, went great :)

Coh3n

2010-05-17 18:38:36

Thanks Frement and yeah that's a good randoms run. :) I've just discovered a bug where the players location wasn't properly set if the previous player went false for some reason other than losing connection or cutting the amount of logs specified. I'm testing the fix now, so hopefully I'll be able to commit that tonight (if not then tomorrow morning).

E: Committed Revision 64. :)

Press Play

2010-05-19 08:31:04

[PHP]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 7 |
| Lamps Solved : 1 |
| Beekeepers Solved : 1 |
| Mordauts Missed : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 58 - |
|=====================================================================================|
| |
| Ran For: 4 Hours, 50 Minutes and 49 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯|
| *** | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| *** | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| *** | False | Lost | 1 | Willow | 27 | 0 | 1,822 | 0 |
| *** | True | Bank | 57 | Willow | 1,596 | 5 | 107,730 | 3 |
|————————————————————————————-|
| Totals: | 58 | | 1,623 | 5 | 109,552 | 3 |
|_____________________________________________________________________________________|
| |
| False Reasons: |
| ¯¯¯¯¯¯¯¯¯¯¯¯¯¯ |
| 0: *** -> |
| 1: *** -> |
| 2: *** -> Failed to find hatchet |
|_____________________________________________________________________________________/[/PHP]

I set Player 0 to false because i wasn't using it.
I set Player 1 to false because i wasn't using it.
Player 2 was in the Mordaut random.
Player 3 was still active.
I stopped the script because it was showing: 'possible random-beekeeper' in the status bar but it was doing NOTHING.

Hope this helps, though most things are SRL related :)

masterBB

2010-05-19 11:09:15

[PHP][0:11:03]: ***** STR: 'Evil Bob'S Island' RANDOM SOLVING FAILED! *****
[0:11:04]: DETAIL: Chop_Trees: Length boxesArr[1]): 39
[0:11:04]: DETAIL: Chop_Trees: Length boxesArr[2]): 139
[0:11:05]: ERROR: Chop_Tree: Failed to find uptext
[0:11:14]: /====================================================|
[0:11:14]: | Coh3n's Draynor Chop N' Bank! |
[0:11:14]: | - Revision 64 - |
[0:11:14]: |====================================================|
[0:11:14]: | |
[0:11:14]: | Program: Simba |
[0:11:14]: | SMART: Yes |
[0:11:14]: | Ran For: 11 Minutes and 14 Seconds |
[0:11:14]: | |
[0:11:14]: | Player: <REMOVED> |
[0:11:14]: | Location: Willows |
[0:11:14]: | Active: False |
[0:11:14]: | Reason: |
[0:11:14]: | Tree Type: Willow |
[0:11:14]: | Loads Done: 1 |
[0:11:14]: | Logs Cut: 27 |
[0:11:14]: | Logs P/H: 144 |
[0:11:14]: | Levels Up: 2 |
[0:11:14]: | Experience: 1,822 |
[0:11:14]: | Breaks: 0 |
[0:11:14]: |____________________________________________________|
[0:11:14]: |____________________________________________________/[/PHP]

Second try:
[PHP][0:03:18]: SUCCESS: Bank_Logs: Successfully opened bank!
[0:03:19]: DETAIL: Bank_Logs: Found 27 logs in inventory
[0:03:24]: ERROR: Bank_Logs: Failed to open bank, retrying…
[0:03:24]: SUCCESS: Bank_Logs: Successfully opened bank!
[0:03:25]: ERROR: Bank_Logs: Failed to find DTM: Willow
[0:03:26]: ERROR: Bank_Logs: Failed to open bank, retrying…[/PHP]

It opens the bank and closes it. But it didn't walk to the trees.

Coh3n

2010-05-19 18:36:03

From: -daazndagger-

I set Player 0 to false because i wasn't using it.
I set Player 1 to false because i wasn't using it.
Player 2 was in the Mordaut random.
Player 3 was still active.
I stopped the script because it was showing: 'possible random-beekeeper' in the status bar but it was doing NOTHING.

Hope this helps, though most things are SRL related :)

Yeah, not much I can do about that. :p

From: masterBB

It opens the bank and closes it. But it didn't walk to the trees.

Did it deposit the logs? Because it said it couldn't find the dtm of the willow logs.

Press Play

2010-05-21 21:39:25

[PHP]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 3 |
| Lamps Solved : 1 |
| ScapeRunes Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 64 - |
|=====================================================================================|
| |
| Ran For: 2 Hours, 23 Minutes and 6 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|—— ——– ———- ——- ——– ———- ——– ———— ——–|
| *** | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| *** | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| *** | False | Bank | 0 | Willow | 0 | 0 | 0 | 0 |
| *** | False | Bank | 40 | Willow | 1,120 | 2 | 75,600 | 2 |
|————————————————————————————-|
| Totals: | 40 | | 1,120 | 2 | 75,600 | 2 |
|_____________________________________________________________________________________|
| |
| False Reasons: |
| ————– |
| 0: *** -> |
| 1: *** -> |
| 2: *** -> |
| 3: *** -> Failed to walk to location: Bank |
|_____________________________________________________________________________________/[/PHP]

I set all the players except the last to false.
The player was active and in the Bank.

EDIT: And another,

[PHP]/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 12 |
| Sandwiches Missed : 1 |
| Lamps Solved : 1 |
| Mods Found : 10 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 64 - |
|=====================================================================================|
| |
| Ran For: 7 Hours, 12 Minutes and 28 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|—— ——– ———- ——- ——– ———- ——– ———— ——–|
| *** | False | Lost | 14 | Willow | 378 | 1 | 25,515 | 0 |
| *** | True | Bank | 89 | Willow | 2,477 | 2 | 167,198 | 5 |
|————————————————————————————-|
| Totals: | 103 | | 2,855 | 3 | 192,713 | 5 |
|_____________________________________________________________________________________|
| |
| False Reasons: |
| ————– |
| 0: *** -> Failed to open bank after 40 tries |
|_____________________________________________________________________________________/[/PHP]
I had to stop it because it was going WAYYY too well :P and plus it was the second run of the day. Player 0 was still in the bank but on the very far side, opposite the bank booths; obviously too far away to find the them.

Edit2: btw, what does SRL do when a 'mod is found'?

V Macro V

2010-05-22 20:22:28

how do i download simba all it showed me was how to get scar :L

bion92

2010-05-23 02:45:46

Coh3n

2010-05-24 09:40:19

From: -daazndagger-

I had to stop it because it was going WAYYY too well :P and plus it was the second run of the day. Player 0 was still in the bank but on the very far side, opposite the bank booths; obviously too far away to find the them.

Edit2: btw, what does SRL do when a 'mod is found'?

Nice reports. :) I really don't know why it has trouble finding the bank sometimes. Every time I've tested, I've had no problems. Could just be a fluke I guess. Also, I'm pretty sure SRL logs out if a mod is found. I'm not sure if it changes worlds, or just waits a certain amount of time before logging back in.

From: V Macro V
how do i download simba all it showed me was how to get scar :L

You have to post on the "Hello World Simba" thread and ask to be a tester. This is just until the official release as far as I know.

gamer716

2010-05-24 14:49:50

[PHP]/====================================================|
[1:24:41]: | Coh3n's Draynor Chop N' Bank! |
[1:24:41]: | - Revision 64 - |
[1:24:41]: |====================================================|
[1:24:41]: | |
[1:24:41]: | Program: Simba |
[1:24:41]: | SMART: Yes |
[1:24:41]: | Ran For: 1 Hours, 24 Minutes and 41 Seconds |
[1:24:41]: | |
[1:24:41]: | Player: |
[1:24:41]: | Location: Bank |
[1:24:41]: | Active: True |
[1:24:41]: | Tree Type: Willow |
[1:24:41]: | Loads Done: 16 |
[1:24:41]: | Logs Cut: 448 |
[1:24:41]: | Logs P/H: 317 |
[1:24:41]: | Levels Up: 4 |
[1:24:41]: | Experience: 30,240 |
[1:24:41]: | Breaks: 0 |
[1:24:41]: |____________________________________________________|
[/PHP]

Amazing Script! Cuts really fast, just has problems finding bank but eventually finds it :)

Coh3n

2010-05-24 14:54:55

From: gamer716

Amazing Script! Cuts really fast, just has problems finding bank but eventually finds it :)

Man, that really bugs me because I can't figure out why it has troubles. What does it seem to do when it's looking for the bank?

coo too

2010-05-24 18:04:07

Really good script but it sometimes gets lost when banking.

[PHP][0:43:17]: /====================================================|
[0:43:17]: | Coh3n's Draynor Chop N' Bank! |
[0:43:17]: | - Revision 64 - |
[0:43:17]: |====================================================|
[0:43:17]: | |
[0:43:17]: | Program: Simba |
[0:43:17]: | SMART: Yes |
[0:43:17]: | Ran For: 43 Minutes and 17 Seconds |
[0:43:17]: | |
[0:43:17]: | Player: REMOVED |
[0:43:17]: | Location: Bank |
[0:43:17]: | Active: True |
[0:43:17]: | Tree Type: Willow |
[0:43:17]: | Loads Done: 12 |
[0:43:17]: | Logs Cut: 336 |
[0:43:17]: | Logs P/H: 465 |
[0:43:17]: | Levels Up: 0 |
[0:43:17]: | Experience: 22,680 |
[0:43:17]: | Breaks: 0 |
[0:43:17]: |____________________________________________________|
[0:43:17]: |____________________________________________________/[/PHP]

Coh3n

2010-05-24 18:08:51

From: coo too
Really good script but it sometimes gets lost when banking.[/PHP]

Read the post before yours.

This has been said ~20 times. I need some more specific information if I'm to update it. Like I've said, it works perfect for me. I'd like to know things like where the player is, where the script clicks that causes it to get lost, things like that.

There is also a bug I've noticed that if it performs the RandomMovement antiban procedure, sometimes it will be as if SMART never releases one of the arrow keys. In other words, the camera doesn't stop spinning around in a circle. This could cause many issues as you can imagine.

coo too

2010-05-25 02:41:13

Well very rarely it fails to find the band booth and the mouse goes back and forth over the screen from the right to the left trying to find the booth 40 times which is when it gives up, so it did actually get to the bank and it had detected it was there. The majority of the time the script ends is because it thinks the player is lost and not in the bank when really they are right inside the bank. This means it is a problem with detecting where the player is, not actually the walking. Oh and I have only used this script to cut willows so far.

EDIT: I occasionally get this message in the debug box whilst cutting willows.

Warning! You passed a wrong xs to a finder function: -16. That is below 0, thus out of bounds. Setting the value to 0 for now.
Warning! You passed a wrong ys to a finder function: -16. That is below 0, thus out of bounds. Setting the value to 0 for now.

Press Play

2010-05-25 04:49:26

I think it cant find the bank because it clicks on the bank symbol to 'relocate', BUT the symbol is too far over to the right of the bank. Therefore causing the script to 'not' find the bank because the player is too far away from the bank booth.

This is what happens in my experience. I will take a closer look so I can help you when I get on the computer; I'm on ipod atm :)

Coh3n

2010-05-25 06:06:41

From: coo too
Well very rarely it fails to find the band booth and the mouse goes back and forth over the screen from the right to the left trying to find the booth 40 times which is when it gives up, so it did actually get to the bank and it had detected it was there. The majority of the time the script ends is because it thinks the player is lost and not in the bank when really they are right inside the bank. This means it is a problem with detecting where the player is, not actually the walking. Oh and I have only used this script to cut willows so far.

EDIT: I occasionally get this message in the debug box whilst cutting willows.

Warning! You passed a wrong xs to a finder function: -16. That is below 0, thus out of bounds. Setting the value to 0 for now.
Warning! You passed a wrong ys to a finder function: -16. That is below 0, thus out of bounds. Setting the value to 0 for now.

Okay, thanks for the details. :)

That warning will occur when the script is detecting if the tree is cut down or not. My function will look in a 20x20 box (or something around 20) around the point clicked, and it the point clicked is really close to the edge of the screen, then this warning will show up. It's really nothing to worry about. :)

From: -daazndagger-
I think it cant find the bank because it clicks on the bank symbol to 'relocate', BUT the symbol is too far over to the right of the bank. Therefore causing the script to 'not' find the bank because the player is too far away from the bank booth.

This is what happens in my experience. I will take a closer look so I can help you when I get on the computer; I'm on ipod atm :)

That's very possible, although it shouldn't have to relocate in the first place. I'm going to have to mess around with it when I get time so maybe it will stop moving the mouse over the east booths (the ones that aren't actually booths).

coo too

2010-05-25 06:43:39

I have another progress report for you, there were no banking problems at all and it finished because it had cut the specified number of logs.

[PHP][2:12:27]: /====================================================|
[2:12:27]: | Coh3n's Draynor Chop N' Bank! |
[2:12:27]: | - Revision 64 - |
[2:12:27]: |====================================================|
[2:12:27]: | |
[2:12:27]: | Program: Simba |
[2:12:27]: | SMART: Yes |
[2:12:27]: | Ran For: 2 Hours, 12 Minutes and 27 Seconds |
[2:12:27]: | |
[2:12:27]: | Player: *********** |
[2:12:27]: | Location: Bank |
[2:12:27]: | Active: False |
[2:12:27]: | Reason: Cut desired number of logs |
[2:12:27]: | Tree Type: Willow |
[2:12:27]: | Loads Done: 36 |
[2:12:27]: | Logs Cut: 1,008 |
[2:12:27]: | Logs P/H: 456 |
[2:12:27]: | Levels Up: 2 |
[2:12:27]: | Experience: 68,040 |
[2:12:27]: | Breaks: 0 |
[2:12:27]: |____________________________________________________|
[2:12:27]: |____________________________________________________/[/PHP]

EDIT:Another progress report, a bit longer this time and it stopped because runescape server closed for updates
[PHP][3:10:02]: /====================================================|
[3:10:02]: | Coh3n's Draynor Chop N' Bank! |
[3:10:02]: | - Revision 64 - |
[3:10:02]: |====================================================|
[3:10:02]: | |
[3:10:02]: | Program: Simba |
[3:10:02]: | SMART: Yes |
[3:10:02]: | Ran For: 3 Hours, 10 Minutes and 2 Seconds |
[3:10:02]: | |
[3:10:02]: | Player: *********** |
[3:10:02]: | Location: Willows |
[3:10:02]: | Active: True |
[3:10:02]: | Tree Type: Willow |
[3:10:02]: | Loads Done: 49 |
[3:10:02]: | Logs Cut: 1,372 |
[3:10:02]: | Logs P/H: 433 |
[3:10:02]: | Levels Up: 2 |
[3:10:03]: | Experience: 92,610 |
[3:10:03]: | Breaks: 0 |
[3:10:03]: |____________________________________________________|
[3:10:03]: |____________________________________________________/[/PHP]

Coh3n

2010-05-25 17:53:55

Awesome, I'm glad the banking issue occurs rarely. :)

Avaphi

2010-05-26 19:42:57

Your forms are so sexy ! Excellent script, 5/5- Two Thumbs up ! Bravo! Encore? Yew banker? cough :D

Coh3n

2010-05-26 20:31:50

From: Avaphi
Your forms are so sexy ! Excellent script, 5/5- Two Thumbs up ! Bravo! Encore? Yew banker? cough :D

Lol, you aren't the first person to ask me that. :p

mrpickle

2010-05-26 22:18:42

Hey Cohn, can you post the previous version where you had the out of range error? I want to compare your scripts and see what you did to solve that :).

i luffs yeww

2010-05-27 01:17:32

^ Right click, SVN Checkout (or something like that), and then instead of HEAD Revision, do Revision: (and then put the version here that had the error). :)

gamer716

2010-05-27 08:47:47

[PHP][8:13:06]: /====================================================|
[8:13:06]: | Coh3n's Draynor Chop N' Bank! |
[8:13:06]: | - Revision 64 - |
[8:13:06]: |====================================================|
[8:13:06]: | |
[8:13:06]: | Program: Simba |
[8:13:06]: | SMART: Yes |
[8:13:06]: | Ran For: 8 Hours, 13 Minutes and 6 Seconds |
[8:13:06]: | |
[8:13:06]: | Player: |
[8:13:06]: | Location: Bank |
[8:13:06]: | Active: False |
[8:13:06]: | Reason: Failed to find trees 60 times |
[8:13:06]: | Tree Type: Willow |
[8:13:06]: | Loads Done: 107 |
[8:13:06]: | Logs Cut: 0 |
[8:13:06]: | Logs P/H: 0 |
[8:13:06]: | Levels Up: 5 |
[8:13:06]: | Experience: 0 |
[8:13:06]: | Breaks: 7 |
[8:13:06]: |____________________________________________________|
[8:13:06]: |____________________________________________________/
[8:13:06]: Successfully executed.[/PHP]

Just got one word, amazing! i wake up in the morning and find 5 lvls up and 3k logs in the bank for one player!…it solved one random since i had a mystery box in my inventory. the reason for inactivity is the script failed the mime random.

Coh3n

2010-05-27 17:34:18

From: mrpickle
Hey Cohn, can you post the previous version where you had the out of range error? I want to compare your scripts and see what you did to solve that :).

What i luffs yeww said. I have no idea what revision the error was at, however.

From: gamer716
Just got one word, amazing! i wake up in the morning and find 5 lvls up and 3k logs in the bank for one player!…it solved one random since i had a mystery box in my inventory. the reason for inactivity is the script failed the mime random.

That's very well could be the best one player report for this script, congratulations! :) Added to the first post.

E: Actually, what's up with the logs cut, etc.? Maybe the DTM is outdated. Have the logs changed at all?

mastaraymond

2010-05-27 19:28:52

From: Coh3n
What i luffs yeww said. I have no idea what revision the error was at, however.

That's very well could be the best one player report for this script, congratulations! :) Added to the first post.

E: Actually, what's up with the logs cut, etc.? Maybe the DTM is outdated. Have the logs changed at all?

Log DTM has changed.. Here is the one I use


DTMFromString('78DA63B4676060C86240034C609211CA63540' +
       '3127904D498008972026A9C81441101350E402295801A4D20518A' +
       '5F0D00E48F03F9');

Coh3n

2010-05-28 00:56:09

Thanks ray. :) I'm assuming that one's for willows?

E: Updated both DTMs in revision 65.

mastaraymond

2010-05-28 04:17:35

From: Coh3n
Thanks ray. :) I'm assuming that one's for willows?

E: Updated both DTMs in revision 65.

Oh, I just made a DTM of the outline.. I figured every log would have the same outline :p.

Coh3n

2010-05-28 08:52:23

From: mastaraymond
Oh, I just made a DTM of the outline.. I figured every log would have the same outline :p.

:duh:

i luffs yeww

2010-05-28 16:51:56

Do they not all have the same outline? 'o.O?

Coh3n

2010-05-28 16:54:02

From: i luffs yeww
Do they not all have the same outline? 'o.O?

Yeah. The :duh: was at myself.

i luffs yeww

2010-05-28 16:56:23

Oh, okay. :)

Press Play

2010-05-28 21:42:07

Here's another:

[PHP]
[2:04:32]: /====================================================|
[2:04:32]: | Coh3n's Draynor Chop N' Bank! |
[2:04:32]: | - Revision 65 - |
[2:04:32]: |====================================================|
[2:04:32]: | |
[2:04:32]: | Program: Simba |
[2:04:32]: | SMART: Yes |
[2:04:32]: | Ran For: 2 Hours, 4 Minutes and 32 Seconds |
[2:04:32]: | |
[2:04:32]: | Player: ************ |
[2:04:32]: | Location: Bank |
[2:04:32]: | Active: True |
[2:04:32]: | Tree Type: Willow |
[2:04:32]: | Loads Done: 29 |
[2:04:32]: | Logs Cut: 812 |
[2:04:32]: | Logs P/H: 391 |
[2:04:32]: | Levels Up: 0 |
[2:04:32]: | Experience: 54,810 |
[2:04:32]: | Breaks: 1 |
[2:04:32]: |____________________________________________________|
[2:04:32]: |____________________________________________________/[/PHP]
Stopped manually.

I did get a little snippet of the banking problem:


[0:52:33]: DETAIL: Chop_IsTreeDown: Tree has been cut down!
[0:52:33]: DETAIL: Chop_Trees: Boxes Found: 4
[0:52:33]: DETAIL: Chop_Trees: Length boxesArr[0]): 314
[0:52:33]: DETAIL: Chop_Trees: Uptext found!
[0:52:36]: DETAIL: Chop_Trees: Track Point: (321, 101)
[0:52:36]: DETAIL: Chop_IsTreeDown: Length inside Box: 0
[0:52:36]: DETAIL: Chop_IsTreeDown: Tree has been cut down!
[0:52:36]: DETAIL: Chop_Trees: Boxes Found: 5
[0:52:36]: DETAIL: Chop_Trees: Length boxesArr[0]): 154
[0:52:36]: DETAIL: Chop_Trees: Uptext found!
[0:52:39]: DETAIL: Chop_Trees: Track Point: (283, 124)
[0:52:39]: DETAIL: Chop_IsTreeDown: Length inside Box: 109
[0:52:40]: DETAIL: Chop_IsTreeDown: Length inside Box: 113
[0:52:41]: DETAIL: Chop_IsTreeDown: Length inside Box: 113
[0:52:42]: DETAIL: Chop_IsTreeDown: Length inside Box: 113
[0:52:42]: DETAIL: Chop_IsTreeDown: Length inside Box: 113
[0:52:43]: DETAIL: Chop_IsTreeDown: Length inside Box: 113
[0:53:02]: SUCCESS: Walk_PerformIndex: Walked to location: Bank
[0:53:02]: SUCCESS: Walk_ToLoc: Walked to Bank
[0:53:04]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:04]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:05]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:05]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:06]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:06]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:08]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:08]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:09]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:09]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:11]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:11]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:12]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:12]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:14]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:14]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:15]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:15]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:18]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:18]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:19]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:19]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:21]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:21]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:22]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:22]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:24]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:24]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:25]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:25]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:27]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:27]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:28]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:28]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:29]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:29]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:31]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:31]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:32]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:32]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[0:53:34]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:37]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:53:37]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[0:53:38]: ERROR: Bank_Logs: Failed to find bank screen
[0:53:39]: DETAIL: Bank_Open: Length: 164
[0:53:41]: SUCCESS: Bank_Logs: Successfully opened bank!
[0:53:42]: DETAIL: Bank_Logs: Found 28 logs in inventory
[0:53:43]: SUCCESS: Bank_Logs: Successfully banked logs!
[0:53:45]: DETAIL: Setup_MainLoop: Sorry, no randoms report for Simba :(

The Player was in THE MIDDLE of the bank and was in clear view of the bank booths, but still could not find the booth. Therefore it caused the script to RELOCATE. This means that if the symbol is too far out: banking fails. In this case the symbol was ok, so the script continued.

This would mean that it is SRL's banking function (for Draynor) is not fully working?

Hope this helps.

EDIT:
New proggy:
[PHP]
[4:56:17]: /====================================================|
[4:56:17]: | Coh3n's Draynor Chop N' Bank! |
[4:56:17]: | - Revision 65 - |
[4:56:17]: |====================================================|
[4:56:17]: | |
[4:56:17]: | Program: Simba |
[4:56:17]: | SMART: Yes |
[4:56:17]: | Ran For: 4 Hours, 56 Minutes and 17 Seconds |
[4:56:17]: | |
[4:56:17]: | Player: ************ |
[4:56:17]: | Location: Bank |
[4:56:17]: | Active: True |
[4:56:17]: | Tree Type: Willow |
[4:56:17]: | Loads Done: 64 |
[4:56:17]: | Logs Cut: 1,763 |
[4:56:17]: | Logs P/H: 357 |
[4:56:17]: | Levels Up: 2 |
[4:56:17]: | Experience: 119,002 |
[4:56:17]: | Breaks: 4 |
[4:56:17]: |____________________________________________________|
[4:56:17]: |____________________________________________________/[/PHP]
It was a good run except for one problem. It encountered the 'quiz' random and failed to solve, BUT the script never ended. These were the last few lines:

[4:59:06]: DETAIL: Chop_IsTreeDown: Length inside Box: 36
[4:59:07]: DETAIL: Chop_IsTreeDown: Length inside Box: 36
[4:59:07]: DETAIL: Chop_IsTreeDown: Length inside Box: 36
[4:59:11]: Possible Random: Quiz.     Identifying by textbox.
[4:59:11]: Possible Random: Surprise Exam.     Identifying by textbox.
[4:59:11]: Possible Random: Molly'S Evil Twin.     Identifying by textbox.
[4:59:11]: Possible Random: Pinball.     Identifying by textbox.
[4:59:11]: Possible Random: Sandwich Lady.     Identifying by textbox.
[4:59:11]: Possible Random: Bee Keeper.     Identifying by textbox.
[4:59:11]: Possible Random: Pillory.     Identifying by textbox.
[4:59:11]: Possible Random: Abyssal Teleport.     Identifying by textbox.
[4:59:11]: Possible Random: Mime.     Identifying by textbox.
[4:59:11]: Possible Random: Quiz.     Identifying by music.
[4:59:13]: ***** STR: FOUND RANDOM: 'Quiz' *****
[4:59:13]: Screenshot of: Found Quiz random 4 Hours, 59 Minutes and 13 Seconds
[5:04:15]: ***** STR: 'Quiz' RANDOM SOLVING FAILED! *****
[5:11:47]: DETAIL: Chop_Trees: Length boxesArr[2]): 61
[5:11:48]: ERROR: Chop_Tree: Failed to find uptext
[5:22:35]: DETAIL: Setup_MainLoop: Switching players
[5:22:35]: NextPlayer

I know it was SRL that failed to solve the random, but I think you should check and see why the script did not 'Terminate'

:)

Coh3n

2010-05-29 08:02:39

Thanks for all the feedback! :)

The bank problem isn't SRL as I wrote my own bank finding functions. I'll have to check it out later when I have more time. As for the random thing, SRL's suppose to logout if a random is failed, so I'm not sure what happened there, sorry.

Caotom

2010-05-30 01:32:43

Najorin

2010-05-30 02:04:53

I accidentally posted this on your Powerchopper… Sorry for that. Anyway, maybe this should help you!

Coh3n, once again, your script takes the cake in its category.
I was gone for a while, as school usually takes its toll on me, and I'm (hopefully) trying to learn to script well.
Now, your script, again, awesome, but it's bugging out on me, as I have not been able to run it for more than two hours continuously (I'm cutting willows, not oaks)… here's the debug for the typical bug out:

[10:50:02 AM]: SUCCESS: Walk_PerformIndex: Walked to location: Bank
[10:50:02 AM]: SUCCESS: Walk_ToLoc: Walked to Bank
[10:50:03 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:03 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:04 AM]: DETAIL: Bank_Open: Length: 86
[10:50:04 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:05 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:05 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:06 AM]: DETAIL: Bank_Open: Length: 141
[10:50:07 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:07 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:07 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:08 AM]: DETAIL: Bank_Open: Length: 141
[10:50:08 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:09 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:09 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:10 AM]: DETAIL: Bank_Open: Length: 141
[10:50:10 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:10 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:10 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:11 AM]: DETAIL: Bank_Open: Length: 141
[10:50:12 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:12 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:12 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:13 AM]: DETAIL: Bank_Open: Length: 82
[10:50:13 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:14 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:14 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:15 AM]: DETAIL: Bank_Open: Length: 141
[10:50:15 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:15 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:15 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:16 AM]: DETAIL: Bank_Open: Length: 86
[10:50:16 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:17 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:17 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:18 AM]: DETAIL: Bank_Open: Length: 157
[10:50:19 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:19 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:19 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:20 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:20 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:21 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:21 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:22 AM]: DETAIL: Bank_Open: Length: 157
[10:50:23 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:23 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:23 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:24 AM]: DETAIL: Bank_Open: Length: 157
[10:50:25 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:25 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:25 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:26 AM]: DETAIL: Bank_Open: Length: 157
[10:50:27 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:50:27 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:27 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:29 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:29 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:30 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:30 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:31 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:31 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:32 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:32 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:34 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:34 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:50:35 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:36 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:36 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:50:38 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:39 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:39 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:50:40 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:41 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:41 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:50:43 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:44 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:44 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:50:45 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:47 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:47 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:50:48 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:50 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:50 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:50:51 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:53 AM]: DETAIL: Bank_Open: Length: 157
[10:50:55 AM]: SUCCESS: Bank_Logs: Successfully opened bank!
[10:50:56 AM]: DETAIL: Bank_Logs: Found 27 logs in inventory
[10:50:57 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:50:57 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:50:59 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:50:59 AM]: DETAIL: Bank_Open: Length: 143
[10:51:00 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[10:51:03 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:03 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:04 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:05 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:05 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:07 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:08 AM]: DETAIL: Bank_Open: Length: 164
[10:51:10 AM]: SUCCESS: Bank_Logs: Successfully opened bank!
[10:51:11 AM]: ERROR: Bank_Logs: Failed to find DTM: Willow
[10:51:11 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:11 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:12 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:16 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:17 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:18 AM]: DETAIL: Bank_Open: Length: 150
[10:51:20 AM]: SUCCESS: Bank_Logs: Successfully opened bank!
[10:51:21 AM]: ERROR: Bank_Logs: Failed to find DTM: Willow
[10:51:21 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:21 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:23 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:26 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:26 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:27 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:28 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:28 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:30 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:31 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:31 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:32 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:34 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:34 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:35 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:36 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:37 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:38 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:39 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:39 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:41 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:42 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:42 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:44 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:45 AM]: DETAIL: Bank_Open: Length: 151
[10:51:47 AM]: SUCCESS: Bank_Logs: Successfully opened bank!
[10:51:48 AM]: ERROR: Bank_Logs: Failed to find DTM: Willow
[10:51:48 AM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[10:51:48 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[10:51:49 AM]: ERROR: Bank_Logs: Failed to find bank screen
[10:51:49 AM]: ERROR: Bank_Logs: Failed to open bank after 40 tries
NextPlayer
SwitchToPlayer(PlayerNo: 0, Active: False);
Player is not Active...
All players not active!
[10:51:54 AM]: PLAYER: Find_PlayerLocation: ******: Location = Bank
[10:51:54 AM]: SUCCESS: Next_Player: All players inactive
Successfully executed




/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 65 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 5 Minutes and 9 Seconds                |
|                                                    |
|    Player:   ******                            |
|    Location: Bank                                  |
|    Active:   False                                 |
|    Reason:   Failed to open bank after 40 tries    |
|      Tree Type:  Willow                            |
|      Loads Done: 0                                 |
|      Logs Cut:   0                                 |
|      Logs P/H:   0                                 |
|      Levels Up:  0                                 |
|      Experience: 0                                 |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

Well, that was pretty extensive… If you look towards the end (10:50:55-10:50:56 is where it successfully banks the logs, making it not possible to find at 10:51:10) of the debug console, you'll notice the "failed to find DTM of willow," and this usually proceeds the bank successfully opening. So! Should the DTM for the willow be False in the inventory when the bank is open, I think you should code it so that should the DTM not be found on the bank screen, count it that the logs have already been banked, and return to willows, rather than the current, which logs the current account out.

I've also noticed that should it locate the bank symbol and it lands on a certain square (usually >2 away from a bank booth) it will fail to find the booth, and mouse over the empty and closed bank booths. Rather than have it keep searching, I'd say just have it immediately Relocate in the bank, as there are most squares, within 2 or 3 of the initial usable booth, that will work with finding the bank booth. (Idk if this is something that you put in your script to randomize and make it seem more human or what-not)

Also, I could say that you could consider using the actual bank, and not the symbol to find it. The symbol fluctuates, but the bank and bank tellers don't… I don't really know too too much to be telling you how to script, so I'll leave it to you. I gave you all I have to offer. As you know, the problem is with the 3 functions Walk_ToLoc, Bank_Open, and Bank_Logs. :redface:

I did make a little grid to show what squares, when landed on, cause the bug-out. It may not be too-too accurate, because I also put some squares on that sometimes worked, and sometimes didn't, so you may have to run yourself.

In any case, Great Work! :D This script is money!

EDIT: OHH! also, consider using the "Bank Banker" rather than the bank booth, as there are only 3 NPCs that all look alike. May be a lot lot easier.

Also, whenever a random IS solved, and the XP Lamp is chosen, it doesn't use it, and it flips out trying to bank it, as RS doesn't let you bank it.

04basir

2010-05-30 05:52:54

Mine worked really nice choppe around 400+ logs but I think it has trouble finding the bank boot and then after around few trys well mine said after 40 trys lol and then logged out and it said players false so the script finished
I saw it doing the bee random it was awsome
But anyways this Draynor choper is AWSOME!!!111111

Edit: done it again =(

[11:37:02 AM]: DETAIL: Chop_IsTreeDown: Length inside Box: 90
[11:37:03 AM]: DETAIL: Chop_IsTreeDown: Length inside Box: 90
[11:37:04 AM]: DETAIL: Chop_IsTreeDown: Length inside Box: 90
[11:37:05 AM]: DETAIL: Chop_IsTreeDown: Length inside Box: 90
[11:37:16 AM]: SUCCESS: Walk_PerformIndex: Walked to location: Bank
[11:37:16 AM]: SUCCESS: Walk_ToLoc: Walked to Bank
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:16 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:16 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:17 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:17 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:17 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:17 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:18 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:18 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:18 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:21 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:22 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:22 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:24 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:25 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:25 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:26 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:27 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:27 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:29 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:30 AM]: DETAIL: Bank_Open: Length: 82
[11:37:30 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[11:37:31 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:31 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:33 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:33 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:33 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:34 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:35 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:35 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:36 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:37 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:38 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:39 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:40 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:40 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:41 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:42 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:42 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:43 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:44 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:44 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:45 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:46 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:46 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:47 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:49 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:49 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:50 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:51 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:51 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:53 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:54 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:54 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:55 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:56 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:56 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:37:57 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:37:58 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:37:58 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:38:00 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:38:01 AM]: DETAIL: Bank_Open: Length: 91
[11:38:01 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[11:38:01 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:38:01 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:38:03 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:38:04 AM]: DETAIL: Bank_Open: Length: 81
[11:38:04 AM]: ERROR: Bank_Open: Failed to choose option: Use-quickly
[11:38:05 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:38:05 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:38:06 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:38:07 AM]: ERROR: Bank_Logs: Failed to open bank, retrying…
[11:38:07 AM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[11:38:08 AM]: ERROR: Bank_Logs: Failed to find bank screen
[11:38:08 AM]: ERROR: Bank_Logs: Failed to open bank after 40 tries
NextPlayer
SwitchToPlayer(PlayerNo: 0, Active: False);
Player is not Active…
All players not active!
[11:38:13 AM]: PLAYER: Find_PlayerLocation: 04reborn: Location = Bank
[11:38:13 AM]: SUCCESS: Next_Player: All players inactive
Successfully executed

Coh3n

2010-05-30 09:25:03

From: c0rrupt f1r3
Well, that was pretty extensive… If you look towards the end (10:50:55-10:50:56 is where it successfully banks the logs, making it not possible to find at 10:51:10) of the debug console, you'll notice the "failed to find DTM of willow," and this usually proceeds the bank successfully opening. So! Should the DTM for the willow be False in the inventory when the bank is open, I think you should code it so that should the DTM not be found on the bank screen, count it that the logs have already been banked, and return to willows, rather than the current, which logs the current account out.

I think it looks for the logs after depositing in case of lag. Once it doesn't find the logs, it will move on. But apparently, it didn't do that for you. It looks like the banking needs more work than I thought.

From: c0rrupt f1r3

I've also noticed that should it locate the bank symbol and it lands on a certain square (usually >2 away from a bank booth) it will fail to find the booth, and mouse over the empty and closed bank booths. Rather than have it keep searching, I'd say just have it immediately Relocate in the bank, as there are most squares, within 2 or 3 of the initial usable booth, that will work with finding the bank booth. (Idk if this is something that you put in your script to randomize and make it seem more human or what-not)

The bank symbol relocation is there as a last resort. If the script was to work properly, it would never use it.

From: c0rrupt f1r3

Also, I could say that you could consider using the actual bank, and not the symbol to find it. The symbol fluctuates, but the bank and bank tellers don't… I don't really know too too much to be telling you how to script, so I'll leave it to you. I gave you all I have to offer. As you know, the problem is with the 3 functions Walk_ToLoc, Bank_Open, and Bank_Logs. :redface:

I'll consider using the actual bank floor color for relocating rather than the symbol.

From: c0rrupt f1r3

I did make a little grid to show what squares, when landed on, cause the bug-out. It may not be too-too accurate, because I also put some squares on that sometimes worked, and sometimes didn't, so you may have to run yourself.

Looks about right. The script will mouse over the bank booth that's closest to the character, and if the empty booths are closer… well, you know.

From: c0rrupt f1r3

EDIT: OHH! also, consider using the "Bank Banker" rather than the bank booth, as there are only 3 NPCs that all look alike. May be a lot lot easier.

I was going to do that a while ago. I forget why it didn't work, but if I get time I'll look more into it.

From: c0rrupt f1r3

Also, whenever a random IS solved, and the XP Lamp is chosen, it doesn't use it, and it flips out trying to bank it, as RS doesn't let you bank it.

This may be due to the DTM being outdated. I know some of the inventory items shapes have changed. If someone has an account with the lamp in it, I could update it. Or, you could just take a screenshot and I could make the DTM that way.

@basir: See above. ;)

Thanks guys for the awesome feedback. :)

Najorin

2010-05-30 12:18:09

From: Coh3n

This may be due to the DTM being outdated. I know some of the inventory items shapes have changed. If someone has an account with the lamp in it, I could update it. Or, you could just take a screenshot and I could make the DTM that way.

Next time I get an XP lamp, i'll take several screens of it, and lay them down on here.

EDIT: I think the reason the bankers may have been tough to use for "Bank Banker" is probably because they face different directions all the time. I have a feeling that would mess with its corresponding DTM, which I'm assuming you'd use.

EDIT: There you go :D Hope it's good enough

Coh3n

2010-05-31 06:04:14

From: c0rrupt f1r3
Next time I get an XP lamp, i'll take several screens of it, and lay them down on here.

EDIT: I think the reason the bankers may have been tough to use for "Bank Banker" is probably because they face different directions all the time. I have a feeling that would mess with its corresponding DTM, which I'm assuming you'd use.

EDIT: There you go :D Hope it's good enough

Thanks! :)

Hopefully I'll have the time to update soon. Alternatively, you can just keep updating SRL. Another Dev may update it it before me.

Press Play

2010-05-31 06:26:13

From: c0rrupt f1r3

Also, whenever a random IS solved, and the XP Lamp is chosen, it doesn't use it, and it flips out trying to bank it, as RS doesn't let you bank it.

From: Coh3n

This may be due to the DTM being outdated.

Oh LOL. So THIS is why my XP lamp was not solved. I didn't really bother to post it though :P

04basir

2010-05-31 08:12:06

***** STR: FOUND RANDOM: 'Pinball' *****
Screenshot of: Found Pinball random 1 Hours, 30 Minutes and 2 Seconds
Starting the pinball solver.
Count: 1248 Bug in P_GetScore!
Exit Found
***** STR: 'Pinball' RANDOM SOLVING FAILED! *****
[01:10:09 PM]: DETAIL: Setup_MainLoop: Switching players

I saw it do this random and it finished and it did find the exit but… when everything was done back to chopping willows it said random failed lol

Coh3n

2010-05-31 18:08:15

From: 04basir
***** STR: FOUND RANDOM: 'Pinball' *****
Screenshot of: Found Pinball random 1 Hours, 30 Minutes and 2 Seconds
Starting the pinball solver.
Count: 1248 Bug in P_GetScore!
Exit Found
***** STR: 'Pinball' RANDOM SOLVING FAILED! *****
[01:10:09 PM]: DETAIL: Setup_MainLoop: Switching players

I saw it do this random and it finished and it did find the exit but… when everything was done back to chopping willows it said random failed lol

You'll have to post about that in the Randoms Bugs section. That's been happening with a lot of randoms it seems.

Press Play

2010-06-01 07:03:23

I had banking problems again. But as I said before; this only happens when the initial 'openbank' fails AND the Bank Symbol is not really directly over the bank.

06:08:08 PM]: DETAIL: Chop_IsTreeDown: Length inside Box: 93
[06:08:09 PM]: DETAIL: Chop_IsTreeDown: Length inside Box: 93
[06:08:10 PM]: DETAIL: Chop_IsTreeDown: Length inside Box: 93
[06:08:11 PM]: DETAIL: Chop_IsTreeDown: Length inside Box: 93
[06:08:23 PM]: SUCCESS: Walk_PerformIndex: Walked to location: Bank
[06:08:23 PM]: SUCCESS: Walk_ToLoc: Walked to Bank
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:23 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:23 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:24 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:28 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:28 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:28 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:32 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:32 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:32 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:33 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:34 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:35 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:35 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:36 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:37 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:38 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:38 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:39 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:40 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:40 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:41 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:42 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:42 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:43 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:44 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:44 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:45 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:46 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:46 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:47 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:48 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:48 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:49 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:49 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:49 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:50 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:50 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:50 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:51 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:51 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:51 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:53 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:53 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:53 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:55 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:55 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:55 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:56 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:56 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:56 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:57 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:58 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:58 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:08:59 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:08:59 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:08:59 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:09:00 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:09:01 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:09:01 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:09:02 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:09:02 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[06:09:02 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[06:09:03 PM]: ERROR: Bank_Logs: Failed to find bank screen
[06:09:03 PM]: ERROR: Bank_Logs: Failed to open bank after 40 tries
NextPlayer
SwitchToPlayer(PlayerNo: 0, Active: False);
Player is not Active...
All players not active!
[06:09:08 PM]: PLAYER: Find_PlayerLocation: *********: Location = Bank
[06:09:08 PM]: SUCCESS: Next_Player: All players inactive
Successfully executed

[07:21:13 PM]: DETAIL: Chop_IsTreeDown: Length inside Box: 107
[07:21:14 PM]: DETAIL: Chop_IsTreeDown: Length inside Box: 107
[07:21:15 PM]: DETAIL: Chop_IsTreeDown: Length inside Box: 107
[07:21:34 PM]: SUCCESS: Walk_PerformIndex: Walked to location: Bank
[07:21:34 PM]: SUCCESS: Walk_ToLoc: Walked to Bank
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:34 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:34 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:35 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:35 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:36 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:37 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:37 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:37 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:38 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:38 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:38 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:39 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:39 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:39 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:40 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:40 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:40 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:41 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:41 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:41 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:43 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:43 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:43 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:44 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:45 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:45 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:46 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:47 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:47 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:48 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:48 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:48 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:50 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:50 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:50 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:51 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:52 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:52 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:53 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:53 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:53 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:54 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:54 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:54 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:55 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:55 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:55 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:56 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:56 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:56 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:57 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:57 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:58 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:21:59 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:21:59 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:21:59 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:22:00 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:22:00 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:22:00 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:22:01 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:22:01 PM]: ERROR: Bank_Logs: Failed to open bank, retrying...
[07:22:01 PM]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[07:22:02 PM]: ERROR: Bank_Logs: Failed to find bank screen
[07:22:02 PM]: ERROR: Bank_Logs: Failed to open bank after 40 tries
NextPlayer
SwitchToPlayer(PlayerNo: 0, Active: False);
Player is not Active...
All players not active!
[07:22:06 PM]: PLAYER: Find_PlayerLocation: *********: Location = Bank
[07:22:06 PM]: SUCCESS: Next_Player: All players inactive
Successfully executed

LINE1249:repeat
LINE1249:    if (not Bank_Open) then
ADDED_IN:      if (not OpenBankFast('db')) then
LINE1251:      begin
LINE1252:        DCnB_Debug('Bank_Logs', 'Failed to open bank, retrying...', DEBUG_ERROR);
LINE1253:        Inc(Tries);

or something similar; so that the script uses SRL's 'openbank' as well as yours. Or on the other hand, you could add reflection and create a 'check postition' function that checks to see if the character is in a sopt where the bank is 'openable'. But that is a bit of a hassle.

PS: I was using SCAR because it happened to be open instead of Simba :P Hope this helps; again :)

EDIT: I just checked the SECOND position of the character. IT WAS RIGHT NEXT TO THE NORTH-MOST BANK BOOTH!:confused:

EDIT 2: I ran the script 2 more times and the same thing happened. There's not point in posting it because it's exactly the same thing. I then added SRL's banking as stated above and it works now. So, i think it's your banking function. I'm still running the script and will post a proggy soon. Note-SRL's function makes banking slower.

EDIT 3: BOOMM!!
[PHP] /====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 65 - |
|====================================================|
| |
| Program: SCAR |
| SMART: Yes |
| Ran For: 19 Minutes and 57 Seconds |
| |
| Player: ********** |
| Location: Bank |
| Active: False |
| Reason: Cut desired number of logs |
| Tree Type: Willow |
| Loads Done: 5 |
| Logs Cut: 135 |
| Logs P/H: 406 |
| Levels Up: 1 |
| Experience: 9,112 |
| Breaks: 0 |
|____________________________________________________|
|____________________________________________________/[/PHP]
Will test for a longer one soon :)

Coh3n

2010-06-01 18:49:02

Wow, I can't believe SRL's function worked. :p It was supposedly way outdated. Anyway, I'm sure my colors are just outdated. Since I have absolutely no time to rewrite the banking right now, I'll add in the line you did for a quick update.

Thanks,
Coh3n

Press Play

2010-06-02 03:25:31

From: Coh3n
Wow, I can't believe SRL's function worked. :p It was supposedly way outdated. Anyway, I'm sure my colors are just outdated. Since I have absolutely no time to rewrite the banking right now, I'll add in the line you did for a quick update.

Thanks,
Coh3n

Lol, no problems. Glad to be of some help :)

Xanith

2010-06-02 22:24:22

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 65 -                   |
|====================================================|
|                                                    |
|    Program: SCAR                                   |
|    SMART:   Yes                                    |
|    Ran For: 5 Hours, 44 Minutes and 53 Seconds     |
|                                                    |
|    Player:   ***** *****                           |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 77                                |
|      Logs Cut:   2,156                             |
|      Logs P/H:   375                               |
|      Levels Up:  3                                 |
|      Experience: 145,530                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

Awesome script Coh3n.

How about a Yew Chop n' Bank? you know you like the idea!

Coh3n

2010-06-03 06:03:20

From: Xanith

Awesome script Coh3n.

How about a Yew Chop n' Bank? you know you like the idea!

Thanks, and I need the time first. :p

04basir

2010-06-03 09:34:34

Time is money friend.

And yeah I would LOVE LOVE LOVE LOVE to see a yew chop n bank xD

04basir

2010-06-03 12:19:47

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 38 Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 6 |
| Frog Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 66 - |
|=====================================================================================|
| |
| Ran For: 5 Hours, 35 Minutes and 40 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|—— ——– ———- ——- ——– ———- ——– ———— ——–|
| 04r | True | Bank | 56 | Willow | 1,568 | 1 | 105,840 | 2 |
| mag | True | Willows | 23 | Willow | 644 | 2 | 43,470 | 1 |
|————————————————————————————-|
| Totals: | 79 | | 2,212 | 3 | 149,310 | 3 |
|_____________________________________________________________________________________|
|_____________________________________________________________________________________/

I had to stop the script my self

Cazabacca

2010-06-03 14:24:21

Been away for a while, getting this error now.

Line 56: [Error] (24633:1): Identifier expected in script C:\Users\xxx\Desktop\DCNB\Draynor Chop N' Bank [RUN ME].scar

I'm sure someone has already asked about this but there are so many new pages to this thread since my last visit I can't bother to go through them all.

And yeah I got stuff updated.

Caotom

2010-06-04 04:17:14

New proggy, this script is definitely the best I've seen in a while ;)

/=====================================================================================|
|                         Coh3n's Draynor Chop N' Bank!                               |
|                                - Revision 65 -                                      |
|=====================================================================================|
|                                                                                     |
|                    Ran For: 1 Hours, 7 Minutes and 37 Seconds                       |
|                             Program: SCAR | SMART: Yes                              |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads |  Tree  | Logs Cut | Levels | Experience | Breaks |
|------ -------- ---------- ------- -------- ---------- -------- ------------ --------|
| XXXX | False  | Bank     |  19   | Willow |  513     |   0    |  34,628    |   0    |
|-------------------------------------------------------------------------------------|
| Totals:                  |  19   |        |  513     |   0    |  34,628    |   0    |
|_____________________________________________________________________________________|
|                                                                                     |
| False Reasons:                                                                      |
| --------------                                                                      |
|   0: XXXX -> Cut desired number of logs                                             |
|                                                                        |
|_____________________________________________________________________________________/

All done with one character with logs to cut set at 500.
(I really need to get my army up and running for willow cutting)

Wolygon

2010-06-05 04:16:14

The maximum times I got it to run for was about 1 hour. Please not I am on satellite internet which is probably why a few of these problems happened (really high ping times, like 1000ms). Here are the problems which caused the script to stop:

-Got Pinball Random. Solved by saying "Found Door". Then said Pinball Random failed to solve, even though it did solve it. It continued to run but didn't do anything and eventually logged out as it thought it was still in the random.
-Got push-ups (whatever its called) random, when going to the bank. Didn't find the random and instead logged out because it was "Lost".
-When walking to bank thought it got lost even though it ended up at the bank.
-Got to bank right at the bottom of it and thought it was lost.

Also when going from the left most tree to the right most tree (willows), it clicks a second time yet misses the tree so the char walks around the tree. Note this will because by my high ping times.

Thanks.

Coh3n

2010-06-05 12:17:31

From: 04basir
Time is money friend.

And yeah I would LOVE LOVE LOVE LOVE to see a yew chop n bank xD

I still need an awesome location to work with. ;)

From: Cazabacca
Been away for a while, getting this error now.
Line 56: [Error] (24633:1): Identifier expected in script C:\Users\xxx\Desktop\DCNB\Draynor Chop N' Bank [RUN ME].scar
I'm sure someone has already asked about this but there are so many new pages to this thread since my last visit I can't bother to go through them all.

And yeah I got stuff updated.

Can you post line 56?

From: Caotom
All done with one character with logs to cut set at 500.
(I really need to get my army up and running for willow cutting)

Glad it's working well for you. :)

From: jesus pwns zezima
The maximum times I got it to run for was about 1 hour. Please not I am on satellite internet which is probably why a few of these problems happened (really high ping times, like 1000ms). Here are the problems which caused the script to stop:

-Got Pinball Random. Solved by saying "Found Door". Then said Pinball Random failed to solve, even though it did solve it. It continued to run but didn't do anything and eventually logged out as it thought it was still in the random.
-Got push-ups (whatever its called) random, when going to the bank. Didn't find the random and instead logged out because it was "Lost".
-When walking to bank thought it got lost even though it ended up at the bank.
-Got to bank right at the bottom of it and thought it was lost.

Also when going from the left most tree to the right most tree (willows), it clicks a second time yet misses the tree so the char walks around the tree. Note this will because by my high ping times.

Thanks.

I'm not sure what happened with the walking ones, but the randoms is in SRL. You should post about them in the Randoms - Bugs thread. ;)

Xanith

2010-06-05 20:33:10

From: Coh3n
I still need an awesome location to work with. ;)

What about North of Varrok Castle? It may be crowded but it's close to a bank.

Edgeville? Too crowded/hard to script?

Wolygon

2010-06-05 20:43:53

From: Coh3n

I'm not sure what happened with the walking ones, but the randoms is in SRL. You should post about them in the Randoms - Bugs thread. ;)

Have done. However I thought that maybe with the Drill Demon one you weren't checking for randoms on the way to the bank….or not

I had another problem with the banking after an hour. Since everyone else seems to get really nice running times, I'm guessing it is my ping times….

Coh3n

2010-06-06 00:40:31

From: Xanith
What about North of Varrok Castle? It may be crowded but it's close to a bank.

Edgeville? Too crowded/hard to script?

Yeah Varrock Castle is just crowded with bots already. Not a very good spot. And Edgeville just isn't good, IMO.

From: jesus pwns zezima
Have done. However I thought that maybe with the Drill Demon one you weren't checking for randoms on the way to the bank….or not

I had another problem with the banking after an hour. Since everyone else seems to get really nice running times, I'm guessing it is my ping times….

Must be. For the drill demon, it could just be SRL not detecting it. I have the script look for randoms while walking so that's not it.

Press Play

2010-06-07 02:34:36

It's hard to find a Yew spot without bots. Even the Yew spot near Rimmington which is far away from the bank. I reckon it's all those rsbots :/ grrr :P

Coh3n

2010-06-07 11:14:41

From: -daazndagger-
It's hard to find a Yew spot without bots. Even the Yew spot near Rimmington which is far away from the bank. I reckon it's all those rsbots :/ grrr :P

Being crowded with bots doesn't bother me as much as not being very close to a bank. I guess I could use reflection walking, but it's something I'd like to avoid. Also, I *think* MSI may be having a yew cutter on the way. ;)

Cazabacca

2010-06-07 15:02:43

From: Coh3n
Can you post line 56?

<<<<<<< .mine

const
<<<<<<< .mine
  USE_FORM = True; // <-- VERY IMPORTANT! True = use PlayerForm
  SCRIPT_VERSION  = '58';
=======
  USE_FORM = True; // <-- VERY IMPORTANT! True = use PlayerForm
  SCRIPT_VERSION  = '64';
>>>>>>> .r64

i luffs yeww

2010-06-07 17:16:27

^ Re-checkout your folder. It's a problem with svn, not the script.

Caotom

2010-06-07 19:11:25

Did you fix the problem with the bank screen where there were one or two spot where the script would spaz in the bank then terminate after 40 tries? It hasn't happened to me lately, got some pretty good proggies :)
Only bug that came at me was the exp lamp wouldn't be banked, it just kept trying over and over (I terminated the script when I found it).
It also failed a few randoms and stopped itself.

Best Proggy so far (all one char, just got another one up and running)

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 38 Randoms Report    |
|       [url]www.villavu.com[/url]        |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs          :        7 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
|                         Coh3n's Draynor Chop N' Bank!                               |
|                                - Revision 66 -                                      |
|=====================================================================================|
|                                                                                     |
|                    Ran For: 4 Hours, 5 Minutes and 39 Seconds                       |
|                             Program: SCAR | SMART: Yes                              |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads |  Tree  | Logs Cut | Levels | Experience | Breaks |
|------ -------- ---------- ------- -------- ---------- -------- ------------ --------|
| XXXX | True   | Bank     |  73   | Willow |  1,971   |   0    |  133,043   |   7    |
|-------------------------------------------------------------------------------------|
| Totals:                  |  73   |        |  1,971   |   0    |  133,043   |   7    |
|_____________________________________________________________________________________|
|                                                                                     |
| False Reasons:                                                                      |
| --------------                                                                      |
|   1: XXXX ->                                                                        |
|_____________________________________________________________________________________/

Press Play

2010-06-08 05:11:26

From: Coh3n
Being crowded with bots doesn't bother me as much as not being very close to a bank. I guess I could use reflection walking, but it's something I'd like to avoid. Also, I *think* MSI may be having a yew cutter on the way. ;)

Yay for MSI! I haven't tested MSI at the moment, but its been SVN checkouted and is sitting in a folder on my computer to be tested :P

Coh3n

2010-06-08 06:13:57

From: Caotom
Did you fix the problem with the bank screen where there were one or two spot where the script would spaz in the bank then terminate after 40 tries? It hasn't happened to me lately, got some pretty good proggies :)
Only bug that came at me was the exp lamp wouldn't be banked, it just kept trying over and over (I terminated the script when I found it).
It also failed a few randoms and stopped itself.

Best Proggy so far (all one char, just got another one up and running)

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 38 Randoms Report    |
|       [url]www.villavu.com[/url]        |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs          :        7 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/=====================================================================================|
|                         Coh3n's Draynor Chop N' Bank!                               |
|                                - Revision 66 -                                      |
|=====================================================================================|
|                                                                                     |
|                    Ran For: 4 Hours, 5 Minutes and 39 Seconds                       |
|                             Program: SCAR | SMART: Yes                              |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads |  Tree  | Logs Cut | Levels | Experience | Breaks |
|------ -------- ---------- ------- -------- ---------- -------- ------------ --------|
| XXXX | True   | Bank     |  73   | Willow |  1,971   |   0    |  133,043   |   7    |
|-------------------------------------------------------------------------------------|
| Totals:                  |  73   |        |  1,971   |   0    |  133,043   |   7    |
|_____________________________________________________________________________________|
|                                                                                     |
| False Reasons:                                                                      |
| --------------                                                                      |
|   1: XXXX ->                                                                        |
|_____________________________________________________________________________________/

Yeah, I've added a failsafe for banking, so that shouldn't happen anymore. If it does it'll be very rarely. Also, update your SRL, I updated the lamp DTM a while ago. Unless it broke again. :(

From: -daazndagger-
Yay for MSI! I haven't tested MSI at the moment, but its been SVN checkouted and is sitting in a folder on my computer to be tested :P

:p There's only a couple scripts in it not, but it'll be a lot better.

sonokirujin

2010-06-08 21:44:45

I was still getting DTM error after depositing the willows. I'm not a very good scripter but I managed to get it working. I am using rev 66 the latest srl and scar, I updated all of them before using the script.

What i did was remove this from line 1280?… it was somewhere close to 1280 but anyway it works fine now.

if (FindDTM(Tree.DTM, dX, dY, MIX1, MIY1, MIX2, MIY2)) then
      begin
        logsInInv := CountItems('dtm', Tree.DTM, [])
        DCnB_Debug('Bank_Logs', 'Found ' + IntToStr(logsInInv) + ' logs in inventory', DEBUG_DETAILS);
      end else
        DCnB_Debug('Bank_Logs', 'Failed to find DTM: ' + Tree.Name, DEBUG_ERROR);

For some reason this worked for about 5 bankings then went back to the error loop.. oh well the new failsafe works pretty well though lol

Coh3n

2010-06-08 22:23:47

From: sonokirujin
I was still getting DTM error after depositing the willows. I'm not a very good scripter but I managed to get it working. I am using rev 66 the latest srl and scar, I updated all of them before using the script.

What DTM error was this again? Sorry. :o

sonokirujin

2010-06-09 13:29:28


[01:26:14 PM]: ERROR: Bank_Logs: Failed to find DTM: Willow
[01:26:14 PM]: SUCCESS: Bank_Logs: Successfully opened bank!

It goes to the bank deposits the willows and then just keeps spamming the 2 messages in the debug box. I've tried at least 10 times but it always does this. It might just be a problem at my end I'm about to see if I can find whats wrong.

Coh3n

2010-06-09 17:24:02

From: sonokirujin
[01:26:14 PM]: ERROR: Bank_Logs: Failed to find DTM: Willow
[01:26:14 PM]: SUCCESS: Bank_Logs: Successfully opened bank!
It goes to the bank deposits the willows and then just keeps spamming the 2 messages in the debug box. I've tried at least 10 times but it always does this. It might just be a problem at my end I'm about to see if I can find whats wrong.

Hm, it seems to be working fine for me. The look of logs changed recently and I had to make a new DTM. Make sure you're at revision 66.

carlover

2010-06-10 17:06:57

Hey I just recently came back to autoing and for some reason when I run your script SMART loads properly but then no mouse appears and nothing happens. This could be due to a setup error on my part. Any help would be much appreciated.
[EDIT]
Sorry, I figured out the problem. The animated background was throwing it off.

Coh3n

2010-06-11 06:04:38

From: carlover
Hey I just recently came back to autoing and for some reason when I run your script SMART loads properly but then no mouse appears and nothing happens. This could be due to a setup error on my part. Any help would be much appreciated.
[EDIT]
Sorry, I figured out the problem. The animated background was throwing it off.

Don't worry, you aren't the first to have that problem. ;)

gamer716

2010-06-12 10:18:21

/====================================================|
[8:07:07]: |           Coh3n's Draynor Chop N' Bank!            |
[8:07:07]: |                  - Revision 66 -                   |
[8:07:07]: |====================================================|
[8:07:07]: |                                                    |
[8:07:07]: |    Program: Simba                                  |
[8:07:07]: |    SMART:   Yes                                    |
[8:07:07]: |    Ran For: 8 Hours, 7 Minutes and 7 Seconds       |
[8:07:07]: |                                                    |
[8:07:07]: |    Player:   *******                         |
[8:07:07]: |    Location: Bank                                  |
[8:07:07]: |    Active:   False                                 |
[8:07:07]: |    Reason:   Cut desired number of logs            |
[8:07:07]: |      Tree Type:  Willow                            |
[8:07:07]: |      Loads Done: 108                               |
[8:07:07]: |      Logs Cut:   3,024                             |
[8:07:07]: |      Logs P/H:   372                               |
[8:07:07]: |      Levels Up:  1                                 |
[8:07:07]: |      Experience: 204,120                           |
[8:07:07]: |      Breaks:     9                                 |
[8:07:07]: |____________________________________________________|
[8:07:07]: |____________________________________________________/

Coh3n

2010-06-12 11:47:57

Wow, very nice report. I'll add that to the first post.

Press Play

2010-06-14 01:24:49

[PHP][0:43:53]: /====================================================|
[0:43:53]: | Coh3n's Draynor Chop N' Bank! |
[0:43:53]: | - Revision 66 - |
[0:43:53]: |====================================================|
[0:43:53]: | |
[0:43:53]: | Program: Simba |
[0:43:53]: | SMART: Yes |
[0:43:53]: | Ran For: 43 Minutes and 53 Seconds |
[0:43:53]: | |
[0:43:53]: | Player: *************** |
[0:43:53]: | Location: Willows |
[0:43:54]: | Active: True |
[0:43:54]: | Tree Type: Willow |
[0:43:54]: | Loads Done: 14 |
[0:43:54]: | Logs Cut: 378 |
[0:43:54]: | Logs P/H: 516 | <<—– !!!
[0:43:54]: | Levels Up: 0 |
[0:43:54]: | Experience: 25,515 |
[0:43:54]: | Breaks: 0 |
[0:43:54]: |____________________________________________________|
[0:43:54]: |____________________________________________________/[/PHP]

Manually stopped. Working pretty purrrr-fect! :)

Coh3n

2010-06-14 06:00:24

Awesome, I'm glad the banking is still holding up. :)

TkrZ

2010-06-23 10:49:37

Help! every time it deposits the willows in the bank, it keeps coming up with this error:

[00:03:45]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:46]: DETAIL: Bank_Logs: Found 27 logs in inventory
[00:03:48]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:49]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:49]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:49]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:49]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:50]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:50]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:51]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:51]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:52]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:52]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:52]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:52]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:53]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:53]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:54]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:54]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:55]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:55]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:56]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:56]: SUCCESS: Bank_Logs: Successfully opened bank!

Please help!:duh:

Coh3n

2010-06-23 16:38:39

Are you using SCAR or Simba? I had someone post a 9 hour report earlier today (in the Simba forum thread). it shouldn't matter what program you're using, so could you tell me what the script was doing? Forget about what the debug said, what exactly was it doing?

E: Just tested myself and nothing seems to be wrong. =\

TkrZ

2010-06-24 11:12:12

I'm using the latest simba with the latest svn + reflection.

basically what happens is, it chops the wood pretty fast and smoothly,it opens up the bank, deposits it and then comes up with the error while the bank is still open. the bank stays open.

Coh3n

2010-06-24 11:52:07

Hmm that's weird. When you say you have the latest revision does is say "Revision 42"? Or "Revision 500 something"? If 42 then you have the pubic revision and you need to get the dev revision (refer to link in my signature). Also, have you tried to run it more than once? If not then it could have jusþ been a freak bug. I'll have to look more into it tonight or tomorrow (I'm on my phone at work right now).

TkrZ

2010-06-25 11:34:57

i have revision 700 :S

Coh3n

2010-06-25 11:36:34

From: IRobot335
i have revision 700 :S

Not Simba, SRL. SRL should be at 500 and something.

Press Play

2010-06-27 05:58:13

[03:07:40 PM]: DETAIL: Chop_IsTreeDown: Length inside Box: 0
[03:07:40 PM]: DETAIL: Chop_IsTreeDown: Tree has been cut down!
[03:07:40 PM]: DETAIL: Chop_Trees: Boxes Found: 0
[03:07:40 PM]: ERROR: Chop_Trees: Failed to find tree
***** STR: FOUND RANDOM: 'Mime' *****
Screenshot of: Found Mime random 53 Minutes and 56 Seconds
***** STR: 'Mime' RANDOM SOLVING FAILED! *****
[03:08:07 PM]: DETAIL: Setup_MainLoop: Switching players
NextPlayer

I haven't been testing your script for a while because I've been testing mine :) It's finally been posted hehe.

I remember getting this bug before. The script finds a random, and if SRL random solving fails, it tries to switch player. But because there is only one player, it just stays like this and never terminates the script.

Try switching around the order of your lines in the Next_Player Procedure: Change: (lines 823-831)


  NextPlayer(active);
  Players[CurrentPlayer].Loc := Find_PlayerLocation;
  playerLoads := 0;

  if (AllPlayersInactive) then
  begin
    DCnB_Debug('Next_Player', 'All players inactive', DEBUG_SUCCESS);
    TerminateScript;
  end;

to:


  if (AllPlayersInactive) then
  begin
    DCnB_Debug('Next_Player', 'All players inactive', DEBUG_SUCCESS);
    TerminateScript;
  end;

NextPlayer(active);
  Players[CurrentPlayer].Loc := Find_PlayerLocation;
  playerLoads := 0;

:)

Coh3n

2010-06-27 10:21:03

Nice reports, and nice find. :) I'll update as soon as I get home.

Becks

2010-06-27 11:55:14

Ran 3 times all 6 hour+ results all stopped by myself. Used breaks and etc. Great script.

Nobrow

2010-06-27 21:46:30

I have this problem.

Line 270: [Error] (15589:1): Invalid number of parameters in script C:\Users\Andrew\Desktop\scarprerelease\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

Coh3n

2010-06-27 21:48:24

From: Nobrow
I have this problem.

Line 270: [Error] (15589:1): Invalid number of parameters in script C:\Users\Andrew\Desktop\scarprerelease\includes\SRL\SRL\Core\AntiRandoms\Sandwich.scar

Move your plugins. If you don't know how, check the link in my signature. If you already have, try restarting SCAR. Also make sure you have the latest SRL (Dev revision).

BraK

2010-06-28 05:47:11

Got a good progy for you.

[PHP]
[11:58:17]: /=====================================================================================|
[11:58:17]: | Coh3n's Draynor Chop N' Bank! |
[11:58:17]: | - Revision 66 - |
[11:58:17]: |=====================================================================================|
[11:58:17]: | |
[11:58:17]: | Ran For: 11 Hours, 58 Minutes and 17 Seconds |
[11:58:17]: | Program: Simba | SMART: Yes |
[11:58:17]: |______ ________ __________ _______ ________ __________ ________ ____________ ________|
[11:58:17]: | Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
[11:58:17]: |—— ——– ———- ——- ——– ———- ——– ———— ——–|
[11:58:17]: | *** | False | Lost | 57 | Willow | 1,596 | 12 | 107,730 | 0 |
[11:58:17]: | *** | False | Lost | 8 | Willow | 224 | 0 | 15,120 | 0 |
[11:58:17]: | *** | False | Bank | 38 | Willow | 1,063 | 1 | 71,752 | 0 |
[11:58:17]: | *** | False | Lost | 17 | Willow | 476 | 0 | 32,130 | 0 |
[11:58:17]: |————————————————————————————-|
[11:58:18]: | Totals: | 120 | | 3,359 | 13 | 226,732 | 0 |
[11:58:18]: |_____________________________________________________________________________________|
[11:58:18]: | |
[11:58:18]: | False Reasons: |
[11:58:18]: | ————– |
[11:58:18]: | 0: **** -> Failed to find trees 60 times |
[11:58:18]: | 1: ** -> Failed to open bank after 40 tries |
[11:58:18]: | 2: *** -> Failed to walk to location: Bank |
[11:58:18]: | 3: *** -> Failed to walk to location: Willows |
[11:58:18]: |_____________________________________________________________________________________/
[/PHP]

Coh3n

From: Hamish
Cool script I got it working for longer this time but I watched it and it seems to take a while to find the banker and just stands in the middle of the bank room and twitches over a few of the grey objects before finding the banker.

Yeah that happens sometimes, there's not much I can do about that. Since there are unoccupied bank booths, it will hover over them a lot.

Hamish

2010-07-01 15:44:44

ffcfoo

2010-07-01 17:35:46

I ran into god today, I now no his real name! His name is "Cohen" and he made a really FUCKING AWESOME SCRIPT! Thanks Works Like a Charm!

EDIT: Here is my proggy!

[3:23:39]: /====================================================|
[3:23:39]: |           Coh3n's Draynor Chop N' Bank!            |
[3:23:39]: |                  - Revision 67 -                   |
[3:23:39]: |====================================================|
[3:23:39]: |                                                    |
[3:23:39]: |    Program: Simba                                  |
[3:23:39]: |    SMART:   Yes                                    |
[3:23:39]: |    Ran For: 3 Hours, 23 Minutes and 39 Seconds     |
[3:23:39]: |                                                    |
[3:23:39]: |    Player:   ***********                                |
[3:23:39]: |    Location: Willows                               |
[3:23:39]: |    Active:   True                                  |
[3:23:39]: |      Tree Type:  Willow                            |
[3:23:39]: |      Loads Done: 53                                |
[3:23:39]: |      Logs Cut:   1,483                             |
[3:23:39]: |      Logs P/H:   436                               |
[3:23:39]: |      Levels Up:  2                                 |
[3:23:39]: |      Experience: 100,102                           |
[3:23:39]: |      Breaks:     3                                 |
[3:23:39]: |____________________________________________________|
[3:23:39]: |____________________________________________________/
[3:23:40]: Successfully executed.

From: Hamish
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL Randoms Report |
| www.villavu.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 1 |
| Quizes Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 67 - |
|====================================================|
| |
| Program: SCAR |
| SMART: Yes |
| Ran For: 1 Hours, 59 Minutes and 42 Seconds |
| |
| Player: zezima|
| Location: Bank |
| Active: True |
| Tree Type: Willow |
| Loads Done: 29 |
| Logs Cut: 782 |
| Logs P/H: 391 |
| Levels Up: 0 |
| Experience: 52,785 |
| Breaks: 0 |
|____________________________________________________|
|____________________________________________________/

Then it randomly stopped with,

[Runtime Error] : Out Of Range in line 446 in script C:\Users\***\Desktop\SCAR\includes\SRL\SRL\Core\Login.scar

You left your username in the proggy, Noob Mistake hehe.

Coh3n

2010-07-01 23:29:05

From: Hamish
Then it randomly stopped with,

[Runtime Error] : Out Of Range in line 446 in script C:\Users\***\Desktop\SCAR\includes\SRL\SRL\Core\Login.scar

Weird, I've never seen that before. The only thing I can think of is that something got messed up in the Players array. Can you post what your line 446 in Login.scar is?

From: ffcfoo
I ran into god today, I now no his real name! His name is "Cohen" and he made a really ******* AWESOME SCRIPT! Thanks Works Like a Charm!

Lol, watch your language for next time (this is a warning). ;) And I wouldn't call me God, but I'm glad you like the script. :rolleyes:

ffcfoo

2010-07-01 23:48:33

From: Coh3n
Weird, I've never seen that before. The only thing I can think of is that something got messed up in the Players array. Can you post what your line 446 in Login.scar is?

Lol, watch your language for next time (this is a warning). ;) And I wouldn't call me God, but I'm glad you like the script. :rolleyes:

Lol sorry. Nice script and Cohen if you think it is not that good I think you are re… can't say that. Hmm Ahh! I got it, Mentally Handicapped.

Coh3n

2010-07-01 23:50:57

From: ffcfoo
Lol sorry. Nice script and Cohen if you think it is not that good I think you are re… can't say that. Hmm Ahh! I got it, Mentally Handicapped.

Lol, I never said I didn't think it was good. ;) I've very proud of this script and how well it works, and continues to work after next to no updates in the last couple months.

ffcfoo

2010-07-01 23:53:05

From: Coh3n
Lol, I never said I didn't think it was good. ;) I've very proud of this script and how well it works, and continues to work after next to no updates in the last couple months.

You know Cohen you should make a Catherby Fisher script or a fletcher script. Currently we have none :( If you decide to make one I could be a tester for you!

Coh3n

2010-07-01 23:55:08

From: ffcfoo
You know Cohen you should make a Catherby Fisher script or a fletcher script. Currently we have none :( If you decide to make one I could be a tester for you!

Any further script development that I have to offer will be continued through MSI. There's still a lot of work I need to do there first, but pretty soon, any script will be able to be added within minutes. ;)

ffcfoo

2010-07-01 23:57:18

From: Coh3n
Any further script development that I have to offer will be continued through MSI. There's still a lot of work I need to do there first, but pretty soon, any script will be able to be added within minutes. ;)

Within minutes? You mean right now? So you are saying you have made other scripts in MSI that haven't been released?

Coh3n

2010-07-01 23:58:44

From: ffcfoo
Within minutes? You mean right now? So you are saying you have made other scripts in MSI that haven't been released?

No, I'm saying that you can start and finish a script in 10-20 minutes (even if you've never made a script before). Check out the MSI forms if you're curious. ;)

ffcfoo

2010-07-02 00:00:53

From: Coh3n
No, I'm saying that you can start and finish a script in 10-20 minutes (even if you've never made a script before). Check out the MSI forms if you're curious. ;)

Im very curious! Also you mean FORUM and not FORM? Lol. Also your saying that there is scripts on the MSI Forum?! If there is im going to be ….. Undecided xD

Coh3n

2010-07-02 00:04:10

From: ffcfoo
Im very curious! Also you mean FORUM and not FORM? Lol. Also your saying that there is scripts on the MSI Forum?! If there is im going to be ….. Undecided xD

Yeah, I meant forums. :p

Currently, MSI only has a couple scripts to offer (as it's a fairly new project, and we're still working out the kinks), but read the MSI introduction and just browse the forum and you'll see what it's all about.

ffcfoo

2010-07-02 00:07:13

From: Coh3n
Yeah, I meant forums. :p

Currently, MSI only has a couple scripts to offer (as it's a fairly new project, and we're still working out the kinks), but read the MSI introduction and just browse the forum and you'll see what it's all about.

Okay, so are all the scripts included in the msi svn?

Coh3n

2010-07-02 00:10:45

From: ffcfoo
Okay, so are all the scripts included in the msi svn?

It's all one script. You decide which "sub-script" (i.e. Powerchopper, banker) to use in the DeclarePlayers. Each player can be doing a different sub-script. So basically, once more sub-scripts get added, you could have a player cutting logs, and another fishing, and another training combat. There are endless possibilities.

Anyway, this isn't the place to discuss this. If you have any further questions, feel free to post on one of the necessary MSI threads. :)

Oh, and the best part about MSI is that is developed by the community so EVERYONE can contribute!

ffcfoo

2010-07-02 00:16:14

From: Coh3n
It's all one script. You decide which "sub-script" (i.e. Powerchopper, banker) to use in the DeclarePlayers. Each player can be doing a different sub-script. So basically, once more sub-scripts get added, you could have a player cutting logs, and another fishing, and another training combat. There are endless possibilities.

Anyway, this isn't the place to discuss this. If you have any further questions, feel free to post on one of the necessary MSI threads. :)

Oh, and the best part about MSI is that is developed by the community so EVERYONE can contribute!

Awesome! Thanks for the info.

Hamish

2010-07-02 07:15:15

just realised I was logging in another character on another SMART client with a different script so maybe both were trying to acess the same file at the same time or something and that was the cause of the error.

Just read through this page and this MSI sounds really interesting, gonna read a bit deeper into that.

Coh3n

2010-07-02 08:03:38

From: Hamish
just realised I was logging in another character on another SMART client with a different script so maybe both were trying to acess the same file at the same time or something and that was the cause of the error.

Just read through this page and this MSI sounds really interesting, gonna read a bit deeper into that.

If both the scripts were open in Simba at the same time then that would probably cause an error, but if you had 2 separate Simbas open, I don't see why it would cause problems.

TkrZ

2010-07-05 17:29:03

Still the same error!

[00:03:45]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:46]: DETAIL: Bank_Logs: Found 27 logs in inventory
[00:03:48]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:49]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:49]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:49]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:49]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:50]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:50]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:51]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:51]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:52]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:52]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:52]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:52]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:53]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:53]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:54]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:54]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:55]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:55]: SUCCESS: Bank_Logs: Successfully opened bank!
[00:03:56]: ERROR: Bank_Logs: Failed to find DTM: Willow
[00:03:56]: SUCCESS: Bank_Logs: Successfully opened bank!

Using latest scar and latest dev repo… help please!

NCDS

2010-07-05 17:36:08

From: IRobot335
Still the same error!

Using latest scar and latest dev repo… help please!

Make sure you have the lastest version of the script as well. It seems as if you are using an older version with an outdated DTM.

Coh3n

2010-07-05 21:49:37

I have no idea why it's not working. It's working fine for me. :confused:

ffcfoo

2010-07-06 00:50:57

From: Coh3n
I have no idea why it's not working. It's working fine for me. :confused:

Works for me to.

Coh3n

2010-07-06 06:07:22

@IRobot: The only things I can think of is that you're using an old version of the script, or the colour settings in the game aren't quite right. Double check both of those and let us know.

Hamish

2010-07-06 07:54:56

From: IRobot335
Still the same error!

Using latest scar and latest dev repo… help please!

Yeah my one was doing this for a while, seem's to happen when there is some lag when it puts the willows into the bank. It doesn't know it's already put the willows in the bank so it still looks for the DTM.

Coh3n

2010-07-06 17:31:31

From: Hamish
Yeah my one was doing this for a while, seem's to happen when there is some lag when it puts the willows into the bank. It doesn't know it's already put the willows in the bank so it still looks for the DTM.

I should be able to add a failsafe for that. I'll look at it more when I have time, but it shouldn't be a problem. :)

Hamish

2010-07-07 08:36:33

[00:41:06]: Possible Random: Quiz.     Identifying by textbox.
[00:41:06]: Possible Random: Surprise Exam.     Identifying by textbox.
[00:41:06]: Possible Random: Molly'S Evil Twin.     Identifying by textbox.
[00:41:06]: Possible Random: Sandwich Lady.     Identifying by textbox.
[00:41:06]: Possible Random: Bee Keeper.     Identifying by textbox.
[00:41:06]: Possible Random: Pillory.     Identifying by textbox.
[00:41:06]: Possible Random: Abyssal Teleport.     Identifying by textbox.
[00:41:06]: True
[00:41:06]: Possible Random: Certer.     Identifying by textbox.
[00:41:06]: Possible Random: Mime.     Identifying by textbox.
[00:41:06]: Possible Random: Quiz.     Identifying by music.
[00:41:08]: Possible Random: Surprise Exam.     Identifying by music.
[00:41:08]: Possible Random: Molly'S Evil Twin.     Identifying by music.
[00:41:08]: Possible Random: Sandwich Lady.     Identifying by music.
[00:41:08]: Possible Random: Bee Keeper.     Identifying by music.
[00:41:08]: Possible Random: Pillory.     Identifying by music.
[00:41:08]: Possible Random: Abyssal Teleport.     Identifying by music.
[00:41:08]: True
[00:41:08]: ***** STR: FOUND RANDOM: 'Certer' *****
[00:41:08]: Screenshot of: Found Certer random 41 Minutes and 8 Seconds
[00:41:10]: We are in the Certer random...
[00:41:21]: Possible Items: 
[00:41:21]: helmet
[00:41:21]: shears
[00:41:21]: shield
[00:41:21]: Analysing Item...
[00:41:51]: Avg Count: 773
[00:41:51]: Avg Width: 48
[00:41:51]: Avg Height: 36
[00:41:51]: Avg Area: 1682
[00:41:51]: Avg Cover: 48
[00:41:51]: Unable to identify Certer item. If convenient please send this account to a SRL Development Team member at http://www.villavu.com/
[00:41:51]: GetItem gave ''
[00:42:07]: ***** STR: 'Certer' RANDOM SOLVING FAILED! *****

Who is an SRL development team member?

Coh3n

2010-07-07 09:32:42

From: Hamish
Who is an SRL development team member?

I am. :rolleyes:

Post the debug you posted in the Randoms - bugs forum. :) I don't have time to look at it right now, so someone else may be able to before me.

TkrZ

2010-07-07 11:02:02

From: Coh3n
@IRobot: The only things I can think of is that you're using an old version of the script, or the colour settings in the game aren't quite right. Double check both of those and let us know.

I have just updated scar, the dev repo and the script… still not working.. even with the reccomended quality settings!

Coh3n

2010-07-07 11:33:51

From: IRobot335
I have just updated scar, the dev repo and the script… still not working.. even with the reccomended quality settings!

Okay, so since you had your hatchet in the inventory, I've written my own deposit algorithm (as opposed to using SRL's Deposit();). I've also added a failsafe where if it doesn't find the DTM of the logs, but the inventory count is <= 3, it will result true.

With both of those added, I don't see how it can fail. But this may tell me if SRL's Deposit() function is broken. Could you please post the debug info regardless of whether it worked or not?

Thanks,
Coh3n

rspur

2010-07-07 14:06:26

confused need help i have this problem
Line 135: [Error] (135:197): Invalid number of parameters in script C:\Users\\Documents\scarprerelease\includes\SRL\SRL\misc\Smart.scar
why is this happening please help
thank you!

Coh3n

2010-07-07 16:42:59

From: rspur
confused need help i have this problem
Line 135: [Error] (135:197): Invalid number of parameters in script C:\Users\\Documents\scarprerelease\includes\SRL\SRL\misc\Smart.scar
why is this happening please help
thank you!

Looks like you don't have the latest version of SRL, or you didn't move your plugins properly. Check out the guide in my signature for help. :)

slackeru

2010-07-08 17:31:32

[6:20:07]: /====================================================|
[6:20:07]: | Coh3n's Draynor Chop N' Bank! |
[6:20:07]: | - Revision 68 - |
[6:20:07]: |====================================================|
[6:20:07]: | |
[6:20:07]: | Program: Simba |
[6:20:07]: | SMART: Yes |
[6:20:07]: | Ran For: 6 Hours, 20 Minutes and 7 Seconds |
[6:20:07]: | |
[6:20:07]: | Player: Bi A Op |
[6:20:07]: | Location: Bank |
[6:20:07]: | Active: False |
[6:20:07]: | Reason: Failed to walk to location: Willows |
[6:20:07]: | Tree Type: Willow |
[6:20:07]: | Loads Done: 151 |
[6:20:07]: | Logs Cut: 4,227 |
[6:20:07]: | Logs P/H: 667 |
[6:20:07]: | Levels Up: 1 |
[6:20:07]: | Experience: 285,322 |
[6:20:07]: | Breaks: 0 |
[6:20:07]: |____________________________________________________|
[6:20:07]: |____________________________________________________/

Coh3n

2010-07-08 20:01:48

Very nice! :D

autoerforlife

2010-07-12 12:36:29

[PHP]/=====================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 68 - |
|=====================================================================================|
| |
| Ran For: 1 Hours, 1 Minutes and 59 Seconds |
| Program: SCAR | SMART: Yes |
|______ ________ __________ _______ ________ __________ ________ ____________ ________|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|—— ——– ———- ——- ——– ———- ——– ———— ——–|
| ### | False | Lost | 3 | Willow | 84 | 0 | 5,670 | 0 |
| ### | False | Bank | 10 | Willow | 280 | 1 | 18,900 | 1 |
|————————————————————————————-|
| Totals: | 13 | | 364 | 1 | 24,570 | 1 |
|_____________________________________________________________________________________|
| |
| False Reasons: |
| ————– |
| 0: ### -> Failed to walk to location: Bank |
| 1: ### -> Cut desired number of logs |
|_____________________________________________________________________________________/
[/PHP]

I don't know why my first char was "lost" because he was at the door of the bank:confused:
But i've tested it more than only this run and never had the problem:thumbsup: nice script!

Coh3n

2010-07-12 13:53:54

Thanks, check out the MSI Scripts. We now have a Draynor banker, and let me tell you, it's much better than this one. :)

Press Play

2010-07-12 18:42:47

From: Coh3n
Thanks, check out the MSI Scripts. We now have a Draynor banker, and let me tell you, it's much better than this one. :)

It's hard to believe that anything could beat this one ;) hehe. I've been away, but I'll try test the MSI one and compare it to yours :)

Coh3n

2010-07-12 18:52:19

From: -daazndagger-
It's hard to believe that anything could beat this one ;) hehe. I've been away, but I'll try test the MSI one and compare it to yours :)

Good luck. ;)

Becks

2010-07-15 19:29:14

/====================================================|
[3:48:35]: | Coh3n's Draynor Chop N' Bank! |
[3:48:35]: | - Revision 68 - |
[3:48:35]: |====================================================|
[3:48:36]: | |
[3:48:36]: | Program: Simba |
[3:48:36]: | SMART: Yes |
[3:48:36]: | Ran For: 3 Hours, 48 Minutes and 36 Seconds |
[3:48:36]: | |
[3:48:36]: | Location: Bank |
[3:48:36]: | Active: True |
[3:48:36]: | Tree Type: Willow |
[3:48:36]: | Loads Done: 87 |
[3:48:36]: | Logs Cut: 2,349 |
[3:48:36]: | Logs P/H: 616 |
[3:48:36]: | Levels Up: 1 |
[3:48:36]: | Experience: 158,558 |
[3:48:36]: | Breaks: 6 |
[3:48:36]: |____________________________________________________|
[3:48:36]: |____________________________________________________/

[5:21:37]: /====================================================|
[5:21:37]: | Coh3n's Draynor Chop N' Bank! |
[5:21:37]: | - Revision 68 - |
[5:21:37]: |====================================================|
[5:21:37]: | |
[5:21:37]: | Program: Simba |
[5:21:37]: | SMART: Yes |
[5:21:37]: | Ran For: 5 Hours, 21 Minutes and 37 Seconds |
[5:21:37]: | |
[5:21:37]: | Location: Willows |
[5:21:37]: | Active: True |
[5:21:37]: | Tree Type: Willow |
[5:21:37]: | Loads Done: 117 |
[5:21:37]: | Logs Cut: 3,159 |
[5:21:37]: | Logs P/H: 589 |
[5:21:37]: | Levels Up: 2 |
[5:21:38]: | Experience: 213,232 |
[5:21:38]: | Breaks: 1 |
[5:21:38]: |____________________________________________________|
[5:21:38]: |____________________________________________________/

Hamish

2010-07-16 21:48:29

Just checked out the draynor willow banker for MSI and it is near flawless you guys gotta try it!

Coh3n

2010-07-16 23:15:02

From: Hamish
Just checked out the draynor willow banker for MSI and it is near flawless you guys gotta try it!

I have to say, the MSI core is pretty well written, and it's only just beginning! :)

Becks

2010-07-17 00:31:08

Msi is awesome but I am sticking with your script. :)

Coh3n

2010-07-17 00:33:25

From: Becks
Msi is awesome but I am sticking with your script. :)

Whatever floats your boat, as long as you know I won't be updating it anymore.

Becks

2010-07-17 01:30:02

From: Coh3n
Whatever floats your boat, as long as you know I won't be updating it anymore.

ah why?! because of msi?

Coh3n

2010-07-17 08:51:46

From: Becks
ah why?! because of msi?

Yep. Any further scripting that I have to offer the community will be through SRL or MSI. Both of the scripts I've maintained over the last couple years are now implemented in MSI, so I see no reason to keep this updated. Now, if MSI sucked then maybe I'd keep it updated, but it's not. :p

Becks

2010-07-17 09:51:18

Good to know. and offtopic but will msi support the barbarian outpost willows :)?

Coh3n

2010-07-17 10:12:33

From: Becks
Good to know. and offtopic but will msi support the barbarian outpost willows :)?

We've been concentrating on F2P locations mostly, but if someone was to write a member's script, I don't see the harm in adding it. Barbarian Outpost would be harder though because of the door. We would have to add something that detects whether the door is open or not.

bobjohn

2010-07-24 23:16:31

ok.. i run it, SMART opens.. then the script sits there continually changing my display setup? :l

i luffs yeww

2010-07-24 23:30:06

From: Coh3n
We've been concentrating on F2P locations mostly, but if someone was to write a member's script, I don't see the harm in adding it. Barbarian Outpost would be harder though because of the door. We would have to add something that detects whether the door is open or not.

I've a nifty idea; check the door handles. The door handles are visible from virtually any angle. If you fine one and not the other, the doors are open. If you find one and they're too far apart, the doors are open. If you find them both and their a certain length apart, they're closed. If they aren't found at all, walk to the doors again, if not in a random, as you're at the trees or lost.

Seems like it should work to me.

Coh3n

2010-07-25 10:28:54

From: bobjohn
ok.. i run it, SMART opens.. then the script sits there continually changing my display setup? :l

You mean the graphics settings? It has to make sure you're on the lowest detail possible.

From: i luffs yeww
I've a nifty idea; check the door handles. The door handles are visible from virtually any angle. If you fine one and not the other, the doors are open. If you find one and they're too far apart, the doors are open. If you find them both and their a certain length apart, they're closed. If they aren't found at all, walk to the doors again, if not in a random, as you're at the trees or lost.

Seems like it should work to me.

That's actually not a bad idea. I'll have to keep that in mind when we get to something like this. :)

Becks

2010-07-25 10:38:15

From: i luffs yeww
I've a nifty idea; check the door handles. The door handles are visible from virtually any angle. If you fine one and not the other, the doors are open. If you find one and they're too far apart, the doors are open. If you find them both and their a certain length apart, they're closed. If they aren't found at all, walk to the doors again, if not in a random, as you're at the trees or lost.

Seems like it should work to me.

Ah. Man sweet find. :)

aka1represent

2010-07-26 19:16:58

the script compiles it loads smart but it just won't log in and after a while it says:

It has been 3 minutes and Runescape is not yet ready… Terminating.

How can I fix it ?

Im using simba version 705.

Coh3n

2010-07-26 20:41:16

From: aka1represent
the script compiles it loads smart but it just won't log in and after a while it says:

It has been 3 minutes and Runescape is not yet ready… Terminating.

How can I fix it ?

Im using simba version 705.

Try again? Sometimes that happens.

I said on the first post that this may or may not work. There's also a link there to one that does work. It's the first line of the first post.

Goobs

2010-07-27 11:29:23

From: aka1represent
the script compiles it loads smart but it just won't log in and after a while it says:

It has been 3 minutes and Runescape is not yet ready… Terminating.

How can I fix it ?

Im using simba version 705.

You should definitely download the MSI version as outlined in the first post as well, as that script works.

iJake

2010-07-28 21:17:27

[PHP][01:10:53]: /====================================================|
[01:10:53]: | Coh3n's Draynor Chop N' Bank! |
[01:10:53]: | - Revision 68 - |
[01:10:53]: |====================================================|
[01:10:53]: | |
[01:10:53]: | Program: Simba |
[01:10:53]: | SMART: Yes |
[01:10:53]: | Ran For: 1 Hours, 10 Minutes and 53 Seconds |
[01:10:53]: | |
[01:10:53]: | Player: My lovely, why would you want my username? |
[01:10:53]: | Location: Bank |
[01:10:53]: | Active: False |
[01:10:53]: | Reason: Failed to walk to location: Bank |
[01:10:53]: | Tree Type: Willow |
[01:10:53]: | Loads Done: 17 |
[01:10:53]: | Logs Cut: 459 |
[01:10:54]: | Logs P/H: 388 |
[01:10:54]: | Levels Up: 0 |
[01:10:54]: | Experience: 30,982 |
[01:10:54]: | Breaks: 1 |
[01:10:54]: |____________________________________________________|
[01:10:54]: |____________________________________________________/[/PHP]

It was at the bank though, heh? :L

i luffs yeww

2010-07-28 21:23:43

@iJake

From: Coh3n, first post ITT
This script will no longer be updated, so it may or may not work. For a working Draynor banker, check out the MSI Scripts.

iJake

2010-07-29 13:19:48

From: i luffs yeww
@iJake

Thanks, completely missed that (:

Endzior

2010-08-02 10:31:18

 /=====================================================================================|
[08:16:41]: |                         Coh3n's Draynor Chop N' Bank!                               |
[08:16:41]: |                                - Revision 68 -                                      |
[08:16:41]: |=====================================================================================|
[08:16:41]: |                                                                                     |
[08:16:41]: |                    Ran For: 8 Hours, 16 Minutes and 41 Seconds                      |
[08:16:41]: |                             Program: Simba | SMART: Yes                             |
[08:16:41]: |______ ________ __________ _______ ________ __________ ________ ____________ ________|
[08:16:41]: | Nick | Active | Location | Loads |  Tree  | Logs Cut | Levels | Experience | Breaks |
[08:16:41]: |------ -------- ---------- ------- -------- ---------- -------- ------------ --------|
[08:16:41]: | top  | False  | Willows  |  121  | Willow |  3,388   |   2    |  228,690   |   0    |
[08:16:41]: | top  | False  | Lost     |  34   | Willow |  952     |   0    |  64,260    |   0    |
[08:16:41]: |-------------------------------------------------------------------------------------|
[08:16:41]: | Totals:                  |  155  |        |  4,340   |   2    |  292,950   |   0    |
[08:16:41]: |_____________________________________________________________________________________|
[08:16:42]: |                                                                                     |
[08:16:42]: | False Reasons:                                                                      |
[08:16:42]: | --------------                                                                      |
[08:16:42]: |   0: top ->                                                                         |
[08:16:42]: |   1: top -> Failed to walk to location: Bank                                        |
[08:16:42]: |_____________________________________________________________________________________/

stopped cuz of certer random. gj thou

Coh3n

2010-08-02 11:31:17

I guess it is still working. :D

h3nuuu

2010-08-07 12:00:05

[1:46:02]: /====================================================|
[1:46:02]: | Coh3n's Draynor Chop N' Bank! |
[1:46:02]: | - Revision 68 - |
[1:46:02]: |====================================================|
[1:46:02]: | |
[1:46:02]: | Program: Simba |
[1:46:02]: | SMART: Yes |
[1:46:02]: | Ran For: 1 Hours, 46 Minutes and 2 Seconds |
[1:46:02]: | |
[1:46:02]: | Player: H3Nuuu |
[1:46:02]: | Location: Willows |
[1:46:02]: | Active: True |
[1:46:02]: | Tree Type: Willow |
[1:46:02]: | Loads Done: 31 |
[1:46:02]: | Logs Cut: 837 |
[1:46:02]: | Logs P/H: 473 |
[1:46:02]: | Levels Up: 6 |
[1:46:02]: | Experience: 56,498 |
[1:46:02]: | Breaks: 0 |
[1:46:02]: |____________________________________________________|
[1:46:02]: |____________________________________________________/

<3 works perfect

h3nuuu

2010-08-07 13:16:07

@aka1represent.

Runescape client is set wrong. client should be safe mode + fixed window. i had same problem and that fixed it for me :)

Osayidan

2010-08-09 20:19:10

Hello, I'm estatic that I was able to finally figure out how to work Simba, however, I keep getting this error: "[0:25:33]: ERROR: Chop_Trees: Failed to find uptext 60 times"

What is UpText? When I was watching it - there was trees all around my character, but it kept saying
[0:25:30]: ERROR: Chop_Tree: Failed to find uptext
[0:25:31]: DETAIL: Chop_Trees: Length boxesArr[1]): 36
[0:25:31]: DETAIL: Chop_Trees: Length boxesArr[2]): 46
[0:25:31]: DETAIL: Chop_Trees: Length boxesArr[3]): 48
[0:25:31]: DETAIL: Chop_Trees: Length boxesArr[4]): 43
[0:25:32]: DETAIL: Chop_Trees: Length boxesArr[5]): 66
And then repeat.
Is there something I need to edit or adjust on my comp? I have vista.

Coh3n

2010-08-10 06:04:15

From: Osayidan
Hello, I'm estatic that I was able to finally figure out how to work Simba, however, I keep getting this error: "[0:25:33]: ERROR: Chop_Trees: Failed to find uptext 60 times"

What is UpText? When I was watching it - there was trees all around my character, but it kept saying
[0:25:30]: ERROR: Chop_Tree: Failed to find uptext
[0:25:31]: DETAIL: Chop_Trees: Length boxesArr[1]): 36
[0:25:31]: DETAIL: Chop_Trees: Length boxesArr[2]): 46
[0:25:31]: DETAIL: Chop_Trees: Length boxesArr[3]): 48
[0:25:31]: DETAIL: Chop_Trees: Length boxesArr[4]): 43
[0:25:32]: DETAIL: Chop_Trees: Length boxesArr[5]): 66
And then repeat.
Is there something I need to edit or adjust on my comp? I have vista.

Uptext is the text that appears in the upper left corner of the RS screen when you hover any object. Are you trying to cut Willows or Oaks? Also, try MSI's Draynor banker (link at the top of first post), as it is more updated and just overall better. :)

Osayidan

2010-08-10 12:00:38

I will download that version :D Thank you!

I was trying to cut Oaks, I just got level 30 and the willows works flawlessly!

[1:17:07]: | Coh3n's Draynor Chop N' Bank! |
[1:17:07]: | - Revision 68 - |
[1:17:07]: |====================================================|
[1:17:07]: | |
[1:17:07]: | Program: Simba |
[1:17:07]: | SMART: No |
[1:17:07]: | Ran For: 1 Hours, 17 Minutes and 7 Seconds |
[1:17:07]: | |
[1:17:07]: | Player: ^_^ |
[1:17:07]: | Location: Bank |
[1:17:07]: | Active: True |
[1:17:07]: | Tree Type: Willow |
[1:17:07]: | Loads Done: 16 |
[1:17:07]: | Logs Cut: 448 |
[1:17:07]: | Logs P/H: 348 |
[1:17:07]: | Levels Up: 3 |
[1:17:07]: | Experience: 30,240 |
[1:17:07]: | Breaks: 1 |
[1:17:07]: |____________________________________________________|
[1:17:07]: |____________________________________________________/

Coh3n

2010-08-10 19:43:05

I figured it may be the Oaks. It's because there's so many normal trees around and the colors are so similar, it hovers the normal trees if you've cut the oak trees down.

JiveTonto@Gmail.com

2010-08-12 05:37:26

[4:50:56]: /====================================================|
[4:50:57]: | Coh3n's Draynor Chop N' Bank! |
[4:50:57]: | - Revision 68 - |
[4:50:57]: |====================================================|
[4:50:57]: | |
[4:50:57]: | Program: Simba |
[4:50:57]: | SMART: Yes |
[4:50:57]: | Ran For: 4 Hours, 50 Minutes and 57 Seconds |
[4:50:57]: | |
[4:50:57]: | Player: not telling yu! |
[4:50:57]: | Location: Bank |
[4:50:57]: | Active: False |
[4:50:57]: | Reason: Failed to find trees 60 times |
[4:50:57]: | Tree Type: Willow |
[4:50:57]: | Loads Done: 96 |
[4:50:57]: | Logs Cut: 2,688 |
[4:50:57]: | Logs P/H: 554 |
[4:50:57]: | Levels Up: 1 |
[4:50:57]: | Experience: 181,440 |
[4:50:57]: | Breaks: 0 |
[4:50:57]: |____________________________________________________|
[4:50:57]: |____________________________________________________/

[4:30:20]: /====================================================|
[4:30:20]: | Coh3n's Draynor Chop N' Bank! |
[4:30:20]: | - Revision 68 - |
[4:30:20]: |====================================================|
[4:30:20]: | |
[4:30:20]: | Program: Simba |
[4:30:20]: | SMART: Yes |
[4:30:20]: | Ran For: 4 Hours, 30 Minutes and 20 Seconds |
[4:30:20]: | |
[4:30:20]: | Player: |
[4:30:21]: | Location: Bank |
[4:30:21]: | Active: False |
[4:30:21]: | Reason: Failed to walk to location: Bank |
[4:30:21]: | Tree Type: Willow |
[4:30:21]: | Loads Done: 85 |
[4:30:21]: | Logs Cut: 2,380 |
[4:30:21]: | Logs P/H: 528 |
[4:30:21]: | Levels Up: 0 |
[4:30:21]: | Experience: 160,650 |
[4:30:21]: | Breaks: 0 |
[4:30:21]: |____________________________________________________|
[4:30:21]: |____________________________________________________/

Tsusho

2010-08-16 16:33:37

Could anyone help me out? I got it to run for 1 load. And when It was at the bank it stopped because of:

Failed when compiling
Line 44: [Error] (44:16): Unknown identifier 'SRLSavePath' in script C:\Program Files (x86)\SCAR 3.23 Beta\includes\SRL\SRL\Core\AntiRandoms\Common.scar

Becks

2010-08-16 16:53:31

Hmm try to re-run. Sometimes you will get random errors.

Tsusho

2010-08-16 17:04:21

From: Becks
Hmm try to re-run. Sometimes you will get random errors.

Yeah I did. It's just not working :S. It's running fine in Simba though.

Becks

2010-08-16 17:15:18

From: Tsusho
Yeah I did. It's just not working :S. It's running fine in Simba though.

good to know. and fyi take a look at msi http://villavu.com/forum/forumdisplay.php?f=125

this script will no longer be updated

Tsusho

2010-08-17 15:40:47

From: Becks
good to know. and fyi take a look at msi http://villavu.com/forum/forumdisplay.php?f=125

this script will no longer be updated

Thanks. I'm having some problems running MSI. It's saying that my hooks are outdated, and if I do try to update it through SVN or manually, it's still there.

Also proggie:

[2:11:08]: /====================================================|
[2:11:08]: | Coh3n's Draynor Chop N' Bank! |
[2:11:08]: | - Revision 68 - |
[2:11:08]: |====================================================|
[2:11:08]: | |
[2:11:08]: | Program: Simba |
[2:11:08]: | SMART: Yes |
[2:11:08]: | Ran For: 2 Hours, 11 Minutes and 8 Seconds |
[2:11:08]: | |
[2:11:08]: | Player: ******* |
[2:11:08]: | Location: Bank |
[2:11:08]: | Active: True |
[2:11:08]: | Tree Type: Willow |
[2:11:08]: | Loads Done: 29 |
[2:11:08]: | Logs Cut: 812 |
[2:11:08]: | Logs P/H: 371 |
[2:11:08]: | Levels Up: 0 |
[2:11:08]: | Experience: 54,810 |
[2:11:08]: | Breaks: 2 |
[2:11:08]: |____________________________________________________|
[2:11:08]: |____________________________________________________/

Thanks for the awesome script. Still running. I hope MSI works soon!

Coh3n

2010-08-17 17:39:04

From: Tsusho
Thanks. I'm having some problems running MSI. It's saying that my hooks are outdated, and if I do try to update it through SVN or manually, it's still there.

Also proggie:

[2:11:08]: /====================================================|
[2:11:08]: | Coh3n's Draynor Chop N' Bank! |
[2:11:08]: | - Revision 68 - |
[2:11:08]: |====================================================|
[2:11:08]: | |
[2:11:08]: | Program: Simba |
[2:11:08]: | SMART: Yes |
[2:11:08]: | Ran For: 2 Hours, 11 Minutes and 8 Seconds |
[2:11:08]: | |
[2:11:08]: | Player: ******* |
[2:11:08]: | Location: Bank |
[2:11:08]: | Active: True |
[2:11:08]: | Tree Type: Willow |
[2:11:08]: | Loads Done: 29 |
[2:11:08]: | Logs Cut: 812 |
[2:11:08]: | Logs P/H: 371 |
[2:11:08]: | Levels Up: 0 |
[2:11:08]: | Experience: 54,810 |
[2:11:08]: | Breaks: 2 |
[2:11:08]: |____________________________________________________|
[2:11:08]: |____________________________________________________/

Thanks for the awesome script. Still running. I hope MSI works soon!

The Draynor script should work regardless of whether the hooks are outdated or not.

Tsusho

2010-08-17 22:09:56

From: Coh3n
The Draynor script should work regardless of whether the hooks are outdated or not.

Oh alright. I'll try it out. Thanks!

JiveTonto@Gmail.com

2010-08-17 23:07:25

just set up a 8 player run on it,so hope illl have a 24 hour + proggy for ya =D

Vapour knuckles

2010-08-19 21:35:32

I love the script it's great, and I read somewhere that you had it so it works to bypass every event, while I came across the event where you have to step on the balloons to get keys to get out of jail which I had to do myself. It's not really a bug, its just to let you know. Also sometimes it gives me this error that when I save a player info it would maybe cause some bugs and it wouldn't save.

Also when you put on break, it would go on break everyone load, I don't know if you intended for that to happen or not.


/=========================================
|           Coh3n's Draynor Chop N' Bank!                                          
|                  - Revision 68 -                                                        
|=========================================
|                                                                                             
|      Program: Simba                                                                    
|      SMART:   Yes                                    
|      Ran For: 2 Hours, 54 Minutes and 21 Seconds     
|                                                    
|      Player:   Mattmatt324                           
|      Location: Willows                               
|      Active:   True                                  
|      Tree Type:  Willow                            
|      Loads Done: 53                                
|      Logs Cut:   1,484                             
|      Logs P/H:   510                               
|      Levels Up:  1                                 
|      Experience: 100,170                           
|      Breaks:     0                                 
|____________________________________________________

Coh3n

2010-08-20 08:45:30

The random events are in SRL, not this script and no it's not suppose to break after each load. It never used to do that, I'm not sure why it would now. Anyway, if this script gives you problems, use MSI's draynor banker as I probably won't be updating this one any time soon.

Vapour knuckles

2010-08-20 11:42:55

Coh3n

2010-08-20 11:51:12

From: Vapour knuckles
Yea, I can't seem to use it atm, because I can't seem to get then extension, I was thinking because the site was down.

The MSI extension? You download it via SVN with MSI. You manually move the .sex file to Simba/Extensions. Also, MSI will still run without the extension.

Nice report though. :)

Vapour knuckles

2010-08-20 13:04:06

Thanks, I had it running while I went to sleep, it's a very good script, almost flawless.

I'm probably should've tried it w/o the extension :P

Coh3n

2010-08-20 13:08:00

From: Vapour knuckles
Thanks, I had it running while I went to sleep, it's a very good script, almost flawless.

I'm probably should've tried it w/o the extension :P

Yeah the extension is pretty useless if you're using one player. It's awesome with several though. :D

butthole

2010-08-20 22:21:23

This script is pretty damn nice.


[3:02:07]: ERROR: Walk_PerformIndex: Failed to walk to location: Bank
[3:02:07]: NextPlayer
[3:02:11]: SwitchToPlayer(PlayerNo: 0, Active: False);
[3:02:12]: Player is not Active...
[3:02:12]: All players not active!
[3:02:12]: PLAYER: Find_PlayerLocation: char1: Location = Bank
[3:02:12]: DETAIL: Setup_MainLoop: Switching players
[3:02:12]: SUCCESS: Next_Player: All players inactive
[3:02:12]: /====================================================|
[3:02:12]: |           Coh3n's Draynor Chop N' Bank!            |
[3:02:12]: |                  - Revision 68 -                   |
[3:02:12]: |====================================================|
[3:02:12]: |                                                    |
[3:02:12]: |    Program: Simba                                  |
[3:02:12]: |    SMART:   Yes                                    |
[3:02:12]: |    Ran For: 3 Hours, 2 Minutes and 12 Seconds      |
[3:02:12]: |                                                    |
[3:02:12]: |    Player:   char1                             |
[3:02:12]: |    Location: Bank                                  |
[3:02:12]: |    Active:   False                                 |
[3:02:12]: |    Reason:   Failed to walk to location: Bank      |
[3:02:12]: |      Tree Type:  Willow                            |
[3:02:12]: |      Loads Done: 57                                |
[3:02:12]: |      Logs Cut:   1,539                             |
[3:02:12]: |      Logs P/H:   506                               |
[3:02:12]: |      Levels Up:  1                                 |
[3:02:12]: |      Experience: 103,882                           |
[3:02:12]: |      Breaks:     0                                 |
[3:02:12]: |____________________________________________________|
[3:02:12]: |____________________________________________________/
[3:02:12]: Successfully executed.

Not sure why it fails to get to the bank. It was actually inside the bank when i logged in and i just restarted the script and its runnin fine again. it's done this a few times but i usually get 1-2 hours out of it before that happens so it doesn't bother me at all.

Coh3n

2010-08-21 09:16:17

From: butthole
This script is pretty damn nice.


[3:02:07]: ERROR: Walk_PerformIndex: Failed to walk to location: Bank
[3:02:07]: NextPlayer
[3:02:11]: SwitchToPlayer(PlayerNo: 0, Active: False);
[3:02:12]: Player is not Active...
[3:02:12]: All players not active!
[3:02:12]: PLAYER: Find_PlayerLocation: char1: Location = Bank
[3:02:12]: DETAIL: Setup_MainLoop: Switching players
[3:02:12]: SUCCESS: Next_Player: All players inactive
[3:02:12]: /====================================================|
[3:02:12]: |           Coh3n's Draynor Chop N' Bank!            |
[3:02:12]: |                  - Revision 68 -                   |
[3:02:12]: |====================================================|
[3:02:12]: |                                                    |
[3:02:12]: |    Program: Simba                                  |
[3:02:12]: |    SMART:   Yes                                    |
[3:02:12]: |    Ran For: 3 Hours, 2 Minutes and 12 Seconds      |
[3:02:12]: |                                                    |
[3:02:12]: |    Player:   char1                             |
[3:02:12]: |    Location: Bank                                  |
[3:02:12]: |    Active:   False                                 |
[3:02:12]: |    Reason:   Failed to walk to location: Bank      |
[3:02:12]: |      Tree Type:  Willow                            |
[3:02:12]: |      Loads Done: 57                                |
[3:02:12]: |      Logs Cut:   1,539                             |
[3:02:12]: |      Logs P/H:   506                               |
[3:02:12]: |      Levels Up:  1                                 |
[3:02:12]: |      Experience: 103,882                           |
[3:02:12]: |      Breaks:     0                                 |
[3:02:12]: |____________________________________________________|
[3:02:12]: |____________________________________________________/
[3:02:12]: Successfully executed.

Not sure why it fails to get to the bank. It was actually inside the bank when i logged in and i just restarted the script and its runnin fine again. it's done this a few times but i usually get 1-2 hours out of it before that happens so it doesn't bother me at all.

Yeah, I'm not really sure why that happens either. Also for progress reports, there are nice

 tags.  Use them rather than [code]. ;)

james151

2010-08-21 15:48:37

Hey i just got one question not sure if someone has asked this already but it would be sick if the bot can do the random game stuff, if they can it dosn't work for me so well yeah,, thanks. This is still the best bot i use.

Coh3n

2010-08-21 22:48:21

From: james151
Hey i just got one question not sure if someone has asked this already but it would be sick if the bot can do the random game stuff, if they can it dosn't work for me so well yeah,, thanks. This is still the best bot i use.

The random events don't have anything do to with my script, it's all in SRL. There are a few that aren't developed yet, and some work some don't. You just have to feel lucky. :p

james151

2010-08-21 22:59:23

oh okay thanks for replying. ill post code tomorrow after i get back from work.

james151

2010-08-22 18:44:07

Amazing script! its still running right now but i want to post it because might turn my laptop off soon. tnks

8:50:26]: |====================================================|
[8:50:26]: | |
[8:50:26]: | Program: Simba |
[8:50:26]: | SMART: Yes |
[8:50:26]: | Ran For: 8 Hours, 50 Minutes and 26 Seconds |
[8:50:27]: | |
[8:50:27]: | Player: Foxy438 |
[8:50:27]: | Location: Bank |
[8:50:27]: | Active: True |
[8:50:27]: | Tree Type: Willow |
[8:50:27]: | Loads Done: 193 |
[8:50:27]: | Logs Cut: 5,404 |
[8:50:27]: | Logs P/H: 611 |
[8:50:27]: | Levels Up: 1 |
[8:50:27]: | Experience: 364,770 |
[8:50:27]: | Breaks: 0 |
[8:50:27]: |____________________________________________________|
[8:50:27]: |____________________________________________________/

Coh3n

Updated this script. All I did was fix the DTMs and added the new SRL Stats. Here's a report.


[5:33:54]: /====================================================|
[5:33:54]: |           Coh3n's Draynor Chop N' Bank!            |
[5:33:54]: |                  - Revision 69 -                   |
[5:33:54]: |====================================================|
[5:33:54]: |                                                    |
[5:33:54]: |    Program: Simba                                  |
[5:33:54]: |    SMART:   Yes                                    |
[5:33:54]: |    Ran For: 5 Hours, 33 Minutes and 54 Seconds     |
[5:33:54]: |                                                    |
[5:33:54]: |    Player:   *********                             |
[5:33:54]: |    Location: Bank                                  |
[5:33:54]: |    Active:   False                                 |
[5:33:54]: |    Reason:   Cut desired number of logs            |
[5:33:54]: |      Tree Type:  Willow                            |
[5:33:54]: |      Loads Done: 36                                |
[5:33:54]: |      Logs Cut:   1,008                             |
[5:33:54]: |      Logs P/H:   181                               |
[5:33:54]: |      Levels Up:  2                                 |
[5:33:54]: |      Experience: 68,040                            |
[5:33:54]: |      Breaks:     1                                 |
[5:33:54]: |____________________________________________________|
[5:33:54]: |____________________________________________________/

The stats for this script can be found here.

grats

2011-01-27 21:51:13

I remember this awesome script B)

I'll give it a go when my wood cutting army has higher combat levels

bookmarked !

NCDS

2011-01-27 23:09:55

Almost makes me want to update my yew cutter. eh, would take too much to make me happy, and I'll keep my priorities ;)

Coh3n

2011-01-30 02:46:13

From: NCDS
Almost makes me want to update my yew cutter. eh, would take too much to make me happy, and I'll keep my priorities ;)

Oh, that actually reminded me. In case you were wondering, it took me 15 minutes to make this work. :p Updated DTMs and replaced the old stats with the new.

Note to all users:
I will only be updating this script when it's broken, I will NOT be adding features or making any major changes, so you can suggest things, but there's a 99% chance it won't get done. ;)

autoerforlife

2011-02-23 11:36:09

keep getting this error: ERROR: Find_Hatchet: Failed to find hatchet
Tried equipping my hatchet and tried it with hatchet in first invent spot. I'm using a mithril hatchet

blother

2011-02-24 20:22:18

For some reason it stopped because it failed to find my hatchet. I have a dragon hatchet equipped and had it set to equipped as well. I'm gonna try in inventory and with a rune hatchet right now. It also won't go to the world i set it too and doesn't bank the willows.

Sorry if this is all easy fix kind of things, this is the first script i've ran and i'm trying to understand how they work and all

grats

Coh3n

2011-04-12 16:19:53

Absolutely, ask whatever you want.

Coh3n

2011-12-31 15:29:20

Script updated to work with the new trees. :) Oaks and Willows should both work. Also updated the first post. See what was changed here.

E: Uploaded a new version.

onilika

2011-12-31 17:18:39

Thanks for the new update. Soon as I go to the computer.. I'll level my lame account!
Happy New Year by the way!

Coh3n

2011-12-31 17:32:43

Thanks, you too. :)

I also forgot to mention you need SRL5 for this to work.

drabe_

2012-01-01 01:44:58

Don't want to sound stupid, but I am have problems.
So I downloaded the script, put in the Simba script folder. Opened it and I press play to start it.

when I enter all the information on the little program that popped up, another thing pops up. It says "" is an invalid integer. What does that mean?

XeonKids

2012-01-01 01:53:31

Why did it say Unable to find file 'DCnB_Form.simba' used from

drabe_

2012-01-01 02:14:35

Yeah my said that too.

XeonKids

2012-01-01 02:37:15

From: drabe_
Yeah my said that too.

Lol xD I thought I was the only one.. Ermm so anyone could help both of us ? :duh:

wolfilax

2012-01-01 13:28:57

Hello, i'm new to this stuff, i try to run it, and then it says, Exception in Script: Unable to find file 'SRL\SRL\misc\Smart.scar', can u please give me a link that explains all the things or something.

bricks

2012-01-01 13:55:15

Coh3n Thank youu! but I have quick question regarding your script
When you say "Determine whether or not you're using SMART (line 51)
Determine whether or not you're using the player form (line 56)"

If I am using SMART what steps would I need to take, and could you explain what player form is and what alternative I have to it please? thanksss

Coh3n

2012-01-01 16:01:17

From: drabe_
Don't want to sound stupid, but I am have problems.
So I downloaded the script, put in the Simba script folder. Opened it and I press play to start it.

when I enter all the information on the little program that popped up, another thing pops up. It says "" is an invalid integer. What does that mean?

That means you didn't fill out one of the form parts properly. You either left it empty or entered some letters that should be numbers.

From: XeonKids
Why did it say Unable to find file 'DCnB_Form.simba' used from

Make sure you extract all the files in the .zip and make sure they're all in the same folder. Also make sure you have the latest version of Simba (should be 980). You can check this by going to Help > About in Simba.

From: wolfilax
Hello, i'm new to this stuff, i try to run it, and then it says, Exception in Script: Unable to find file 'SRL\SRL\misc\Smart.scar', can u please give me a link that explains all the things or something.

Um, this script doesn't include Smart.scar. Are you sure you downloaded Rev. 71 from the first post?

From: bricks
Coh3n Thank youu! but I have quick question regarding your script
When you say "Determine whether or not you're using SMART (line 51)
Determine whether or not you're using the player form (line 56)"

If I am using SMART what steps would I need to take, and could you explain what player form is and what alternative I have to it please? thanksss

It tells you what to do on line 51 if you don't want to use SMART. I recommend using SMART, and the script does by default, so you shouldn't have to worry. The player form is the form that pops up when you hit play in Simba. That's where you enter your player information. The alternative is filling out DeclarePlayers. If you're new, I recommend using the player form.

AProAdrax

2012-01-01 21:19:03

I am getting this error…

Exception in Script: Unable to find file 'DCnB_Form.simba' used from ''

I have updated to srl 5 and I hash tagged smart out. The file is in the same place as the script..Can you help? Thanks!

Coh3n

2012-01-01 22:26:56

From: AProAdrax
I am getting this error…
Exception in Script: Unable to find file 'DCnB_Form.simba' used from ''
I have updated to srl 5 and I hash tagged smart out. The file is in the same place as the script..Can you help? Thanks!

Hm, why is that happening…

In Simba, can you go to Help > About and tell me which version is says you're using?

XeonKids

2012-01-02 01:28:15

From: Coh3n
Hm, why is that happening…

In Simba, can you go to Help > About and tell me which version is says you're using?

I am having the same problem.. my Version

Simba is released under the GPL license.
You are currently using version: 980
Compiled with FPC version 2.4.4

Please report bugs at: http://bugs.villavu.com/

Coh3n

2012-01-02 02:34:51

From: XeonKids
I am having the same problem.. my Version

Simba is released under the GPL license.
You are currently using version: 980
Compiled with FPC version 2.4.4

Please report bugs at: http://bugs.villavu.com/

Hm, well this is the strangest thing, but I found why this is happening. I think it's a bug in Simba, so I'll file a bug report if this solution works for you.

Here's what you need to do: Open Simba FIRST, then open the DCnB run me file from within Simba by either dragging the file into the text window, or going to File > Open. Let me know if that works.

E: It was a bug in Simba. It's been found and should be fixed for the next Simba release.

E2: Added revision 72.

iPaa

2012-01-02 19:38:02

What do you put next to logs? When you set up the script below selecting willows? I keep getting an error? :/

XeonKids

2012-01-02 22:02:11

From: Coh3n
Hm, well this is the strangest thing, but I found why this is happening. I think it's a bug in Simba, so I'll file a bug report if this solution works for you.

Here's what you need to do: Open Simba FIRST, then open the DCnB run me file from within Simba by either dragging the file into the text window, or going to File > Open. Let me know if that works.

E: It was a bug in Simba. It's been found and should be fixed for the next Simba release.

E2: Added revision 72.

Ohh I see.. Hey!! It works!! I did what you said by opening SIMBA then dragging files in.. And it runs!! Thanks man! :spot::spot:

Coh3n

2012-01-02 22:08:02

From: iPaa
What do you put next to logs? When you set up the script below selecting willows? I keep getting an error? :/

How many logs you want to cut. Sorry, the image of the word isn't very descriptive. You can hover your mouse over the box and a hint will pop up, though. :)

From: XeonKids
Ohh I see.. Hey!! It works!! I did what you said by opening SIMBA then dragging files in.. And it runs!! Thanks man! :spot::spot:

No problem. :)

XeonKids

2012-01-02 22:22:24

From: Coh3n
How many logs you want to cut. Sorry, the image of the word isn't very descriptive. You can hover your mouse over the box and a hint will pop up, though. :)

No problem. :)

Hmmm.. for the Logs option.. I put 27.. It says its an invalid integer .. Ahhh can you help me again ?:(

Coh3n

2012-01-02 22:24:25

From: XeonKids
Hmmm.. for the Logs option.. I put 27.. It says its an invalid integer .. Ahhh can you help me again ?:(

You didn't put like a period or space before/after it? I just tried it and it works fine for me.

XeonKids

2012-01-02 22:32:44

From: Coh3n
You didn't put like a period or space before/after it? I just tried it and it works fine for me.

Whats a period ? Lol D: Is it a full stop ? I tried before and after with a fullstop.. Still says its an invalid integer T_T

Coh3n

2012-01-03 01:55:33

From: XeonKids
Whats a period ? Lol D: Is it a full stop ? I tried before and after with a fullstop.. Still says its an invalid integer T_T

A period (.), the punctuation.

Are you sure it's the logs box giving you an error?

XeonKids

2012-01-03 04:25:31

From: Coh3n
A period (.), the punctuation.

Are you sure it's the logs box giving you an error?

Ermm should be! But for the Nickname part.. I just put the last 3 letters of my account right? I done it all right.. Should be the logs part >.<

MoneyBags

2012-01-03 12:23:32

this is not working for me i keep getting Exception in Script: Unable to find file 'DCnB_Form.simba' used from ''

i tried dragging i tried opening if you could please help i would appreciate it.

iPaa

2012-01-03 13:08:31

I am the same as XeonKids i get the same error, invalid integer ? All the boxes are filled in.

Coh3n

2012-01-03 15:29:41

From: XeonKids
Ermm should be! But for the Nickname part.. I just put the last 3 letters of my account right? I done it all right.. Should be the logs part >.<

From: iPaa
I am the same as XeonKids i get the same error, invalid integer ? All the boxes are filled in.

Can one of you post a screenshot of the error please? Or just the entire error message? Also make sure all the boxes are filled in for the script setup tab as well.

From: MoneyBags
this is not working for me i keep getting Exception in Script: Unable to find file 'DCnB_Form.simba' used from ''

i tried dragging i tried opening if you could please help i would appreciate it.

Weird. May just have to wait for the next version of Simba (which should be soon).

wantonman

2012-01-03 15:49:30

this script by far is supirior to all other tree cutters… i like the tree finding/ detection methods….

Coh3n

2012-01-03 16:35:02

From: wantonman
this script by far is supirior to all other tree cutters… i like the tree finding/ detection methods….

I'm following the stats on it, and no one has used it, so unless you post a progress report or something, I'm just going to assuming that post is spam.

Ryzo

2012-01-03 20:02:38

I feel like an idiot but it's the first time I have tried "Simba" and I can't seem to find a tutorial on how to set up bots.

I have entered my username and stuff but I get this error when I press run

http://gyazo.com/29be3f70081b51385e315eb311725cd9

Mind explaining how I set scripts up?

Coh3n

2012-01-03 20:37:32

From: Ryzo
I feel like an idiot but it's the first time I have tried "Simba" and I can't seem to find a tutorial on how to set up bots.

I have entered my username and stuff but I get this error when I press run

http://gyazo.com/29be3f70081b51385e315eb311725cd9

Mind explaining how I set scripts up?

Says on the first post.

MoneyBags

2012-01-04 14:06:12

Coh3n I watched this video and set up my Simba using it. Is there anything else I need to know to set Simba up to run this your script?

http://youtu.be/w8AOMJ7voPk?hd=1

Also I am not sure where I am spose to add the player Info theres a lot of code.

Coh3n

2012-01-04 14:09:50

From: MoneyBags
Coh3n I watched this video and set up my Simba using it. Is there anything else I need to know to set Simba up to run this your script?

http://youtu.be/w8AOMJ7voPk?hd=1

Also I am not sure where I am spose to add the player Info theres a lot of code.

You just hit Run and a form will pop up. Fill it out and you're good to go.

You may need the latest version of Simba if it hasn't been added to the updater. It should be greater than 980. If you have 980, download the .exe file from here. It will be added to the Simba updater soon, though.

MoneyBags

2012-01-04 14:33:23

From: Coh3n
You just hit Run and a form will pop up. Fill it out and you're good to go.

You may need the latest version of Simba if it hasn't been added to the updater. It should be greater than 980. If you have 980, download the .exe file from here. It will be added to the Simba updater soon, though.

so i dont edit any code :P lol i thought i had to put in the info in the code then run it and trying that now.

Coh3n

2012-01-04 14:40:24

From: MoneyBags
so i dont edit any code :P lol i thought i had to put in the info in the code then run it and trying that now.

You can if you want, but you don't HAVE to. ;) I added the form so it's easy for you guys.

MoneyBags

2012-01-04 14:46:03

still getting the Exception in Script: Unable to find file 'DCnB_Form.simba' used from ''
error after i reinstalled it says im still runing Simba 0.98 though after i updated.

and sorry if these are dumb questions im new to simba I want to start botting with it though. It looks awesome

Coh3n

2012-01-04 15:15:05

From: MoneyBags
still getting the Exception in Script: Unable to find file 'DCnB_Form.simba' used from ''
error after i reinstalled it says im still runing Simba 0.98 though after i updated.

and sorry if these are dumb questions im new to simba I want to start botting with it though. It looks awesome

Try the solution in the first post. I've been informed that the new Simba has been added to the updater. Go to Help > About in Simba and make sure your version is 982.

MoneyBags

2012-01-04 15:21:02

Simba is released under the GPL license.
You are currently using version: 982
Compiled with FPC version 2.4.4

Please report bugs at: http://bugs.villavu.com/

Coh3n

2012-01-04 15:24:46

From: MoneyBags
Simba is released under the GPL license.
You are currently using version: 982
Compiled with FPC version 2.4.4

Please report bugs at: http://bugs.villavu.com/

And you're still getting that error? Hmm.

Make sure Draynor Chop N' Bank [RUN ME].simba and DCnB_Form.simba are in the same folder.

MoneyBags

2012-01-04 15:43:24

From: Coh3n
And you're still getting that error? Hmm.

Make sure Draynor Chop N' Bank [RUN ME].simba and DCnB_Form.simba are in the same folder.

thats what I have it set up in. Again im sorry for asking these questions this is my first time to try to use Simba

Coh3n

2012-01-04 15:46:52

Try what it says under Bugs in the first post.

MoneyBags

2012-01-04 15:55:55

just tried dragging it, then tried opening by file –> open

then i also tried putting in the scripts file none of them worked guess my computer or Simba hate me…

Coh3n

2012-01-05 01:27:17

From: MoneyBags
just tried dragging it, then tried opening by file –> open

then i also tried putting in the scripts file none of them worked guess my computer or Simba hate me…

Have you tried reinstalling? I've tried every possible way I can think of and I can't recreate this problem.

E: Can't find file DCnB_Form.simba used from '': You HAVE to extract (unzip) the .zip at the bottom of the first post!

TheNutKicker

2012-01-06 11:14:30

i get '' is an invalid integer.

VillaVuFTW

2012-01-06 18:55:17

Anybody getting the "" is an invalid integer

Make sure to fill out all SPACES

If you don't have a SRL.STATS just make one >.<

Don't want to break? Set the loads and breaks to like 1000000 chances are unless you leave your account on for 520 days or w\e you won't ever break

Every text field needs to be filled out!

Coh3n

2012-01-07 13:59:44

From: VillaVuFTW
Anybody getting the "" is an invalid integer

Make sure to fill out all SPACES

If you don't have a SRL.STATS just make one >.<

Don't want to break? Set the loads and breaks to like 1000000 chances are unless you leave your account on for 520 days or w\e you won't ever break

Every text field needs to be filled out!

Since some people don't understand that I'll try to change it for revision 73 so it'll just run forever if it's not filled out. There have also been a number of other improvements.

iPaa

2012-01-07 14:21:18

Coh3n its not banking right. It clicks on deposit money not inv :)

Coh3n

2012-01-07 15:17:18

From: iPaa
Coh3n its not banking right. It clicks on deposit money not inv :)

Oops, apparently I don't call DepositAll. Replace line 675 with


DepositAll();

Should fix it. I'll update that for the next version.

If you can't get that to work, just set it up so your hatchet it's equipped.

ngan

2012-01-07 16:00:05

what do i type in the logs section it not letting me

Coh3n

2012-01-07 18:44:01

From: ngan
what do i type in the logs section it not letting me

It's how many logs you want to cut and what do you mean it's not letting you? If you mean it won't let you type, that's impossible unless your computer froze.

dane9999

2012-01-08 06:00:53

looks good going to try it (:

meskafonas

2012-01-08 07:26:14

what word i need fill into player setup *logs. please help!!!

1 3 3 7

2012-01-08 14:20:24

From: meskafonas
what word i need fill into player setup *logs. please help!!!

^this

TheNutKicker

2012-01-08 16:47:37

Nice Script a lot better then the MSI Woodcutter one.

Coh3n

2012-01-08 18:17:51

Logs is the number of logs you want to cut. There's going to be a hint when you hover the box for the next version.

Coh3n

2012-01-09 02:06:13

Updated to Revision 73:


$ git shortlog dcnb-72..dcnb-73|cat
Cohen Adair (11):
      Added TimeRunning to progress reports & increased Location size in multiplayer report
      Added a couple FindRandoms checks, connection loss failsafe, and relocating to fishing symbol if trees/uptext isn't found.
      Fixed report & a couple rare out of ranger errors that occur on ScriptTerminate
      Single player report shows player number rather that username now
      Combined form and script file to avoid some user errors
      Changed some naming
      Form now loads players automatically
      Added FileExists check for loading players + made load button invisible
      Player file now saves in .txt format
      Removed form file
      Fixed DepositAll(), added relocating, added form hints to TEdits, other small tweaks

Small progress report from Rev. 73:


/=======================================================================================|
|                          Coh3n's Draynor Chop N' Bank!                                |
|                                 - Revision 73 -                                       |
|=======================================================================================|
|                    Ran for: 1 Hours, 20 Minutes and 5 Seconds                         |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
| Nick | Active | Location   | Loads |  Tree  | Logs Cut | Levels | Experience | Breaks |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
| ora  | False  | Bank       |  0    | Willow |  0       |   0    |  0         |   0    |
| rod  | False  | Bank       |  0    | Willow |  0       |   0    |  0         |   0    |
| bys  | False  | Bank       |  19   | Willow |  513     |   0    |  34,628    |   1    |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
| Totals:                    |  19   |        |  513     |   0    |  34,628    |   1    |
|_______________________________________________________________________________________|
|                                                                                       |
| False Reasons:                                                                        |
| &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;                                                                        |
|   0: ora -> User set to false                                                         |
|   1: rod -> User set to false                                                         |
|   2: bys -> Cut desired number of logs                                                |
|_______________________________________________________________________________________/

All in all, this version should be about 80x better than the last.

Enjoy,
Coh3n

TheNutKicker

2012-01-09 03:48:00

From: Coh3n
Updated to Revision 73:


$ git shortlog dcnb-72..dcnb-73|cat
Cohen Adair (11):
      Added TimeRunning to progress reports & increased Location size in multiplayer report
      Added a couple FindRandoms checks, connection loss failsafe, and relocating to fishing symbol if trees/uptext isn't found.
      Fixed report & a couple rare out of ranger errors that occur on ScriptTerminate
      Single player report shows player number rather that username now
      Combined form and script file to avoid some user errors
      Changed some naming
      Form now loads players automatically
      Added FileExists check for loading players + made load button invisible
      Player file now saves in .txt format
      Removed form file
      Fixed DepositAll(), added relocating, added form hints to TEdits, other small tweaks

Small progress report from Rev. 73:


/=======================================================================================|
|                          Coh3n's Draynor Chop N' Bank!                                |
|                                 - Revision 73 -                                       |
|=======================================================================================|
|                    Ran for: 1 Hours, 20 Minutes and 5 Seconds                         |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
| Nick | Active | Location   | Loads |  Tree  | Logs Cut | Levels | Experience | Breaks |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
| ora  | False  | Bank       |  0    | Willow |  0       |   0    |  0         |   0    |
| rod  | False  | Bank       |  0    | Willow |  0       |   0    |  0         |   0    |
| bys  | False  | Bank       |  19   | Willow |  513     |   0    |  34,628    |   1    |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
| Totals:                    |  19   |        |  513     |   0    |  34,628    |   1    |
|_______________________________________________________________________________________|
|                                                                                       |
| False Reasons:                                                                        |
| &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;                                                                        |
|   0: ora -> User set to false                                                         |
|   1: rod -> User set to false                                                         |
|   2: bys -> Cut desired number of logs                                                |
|_______________________________________________________________________________________/

All in all, this version should be about 80x better than the last.

Enjoy,
Coh3n

Looking forward to downloading it, currently in rev 72 im doing 1000+ willow logs cut in about 2 hours or something.

TheNutKicker

2012-01-09 04:09:37

Coh3n

2012-01-09 04:30:23

Right on! :) In Rev. 73, it won't show your username. Also, we have report tags you can use. Just remove the spaces.


Paste the progress report here

Erke

2012-01-09 04:34:54

Looks really neat with the form and all but I have problem with that it sometimes spins around the camera and cant find anymore trees so it just sits there for awhile and then logout :/
Other thing is that it walk to the otherside of the road when cutting oaks and it cant find back to the bank

Coh3n

2012-01-09 04:42:13

From: Erke
Looks really neat with the form and all but I have problem with that it sometimes spins around the camera and cant find anymore trees so it just sits there for awhile and then logout :/

Does the camera stop spinning? Or does it just continuously spin? Also, are all the trees cut down?

meskafonas

2012-01-09 07:13:23

Can someone help? i have problem when my bot putting logs in bank , pressing wrong button

Uploaded with ImageShack.us

natcrafteer

2012-01-09 18:11:33

when i hit start i get an erroe saying "" is an invalid intger

Coh3n

2012-01-09 22:28:07

From: meskafonas
Can someone help? i have problem when my bot putting logs in bank , pressing wrong button

Uploaded with ImageShack.us

You don't have the latest version of this script, or SRL.

From: natcrafteer
when i hit start i get an erroe saying "" is an invalid intger

For the 9th time, can someone please post a picture of this error.

And fill out all the boxes.

Green Bay Packers

2012-01-09 22:52:34

From: Coh3n
You don't have the latest version of this script, or SRL.

For the 9th time, can someone please post a picture of this error.

And fill out all the boxes.

You appear stressed.

Rezozo

2012-01-09 23:27:47

After some tampering i finally got it to work, and man does this work like a boss!!!
Apparently, for me, the form wasn't working, even though the problem fix you stated was to fill every box, so i had to run the non form setup, which didnt work either until i changed which smart server from 157 to like 10, then smart finally opened.
Hope this helped anyone having this problem anyway :)
will post proggy soon!

EDIT: Um… btw, Is the proggy saved somewhere, or is it just in the debug box of simba?
Sorry for the nubness –@@

MeetmeDeath

2012-01-10 01:30:07

From: Coh3n
You don't have the latest version of this script, or SRL.

For the 9th time, can someone please post a picture of this error.

And fill out all the boxes.

and ima go with its people are not fulling in the break time box cause once i filled it in that error stopped

Uploaded with ImageShack.us

Coh3n

2012-01-10 02:56:49

From: joeygupta
After some tampering i finally got it to work, and man does this work like a boss!!!
Apparently, for me, the form wasn't working, even though the problem fix you stated was to fill every box, so i had to run the non form setup, which didnt work either until i changed which smart server from 157 to like 10, then smart finally opened.
Hope this helped anyone having this problem anyway :)
will post proggy soon!

EDIT: Um… btw, Is the proggy saved somewhere, or is it just in the debug box of simba?
Sorry for the nubness –@@

No, it's not saved anywhere.

From: MeetmeDeath
and ima go with its people are not fulling in the break time box cause once i filled it in that error stopped

Uploaded with ImageShack.us

Break Time box, thank you! :) I can fix that for the next version.

E: Those form errors are fixed in Rev. 74. :)

Rezozo

2012-01-10 07:28:30

I luv Pie!

Rezozo

2012-01-10 07:30:48

From: Coh3n
No, it's not saved anywhere.

Break Time box, thank you! :) I can fix that for the next version.

E: Those form errors are fixed in Rev. 74. :)

Gotchya ty


Status: /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
Status: |     SRL Randoms Report       |
Status: |       [url]www.villavu.com[/url]        |
Status: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Status: | SRL Logs          :        1 |
Status: \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 73 -                   |
|====================================================|
|        6 Hours, 13 Minutes and 56 Seconds          |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   False                                 |
|    Reason:   Failed to find trees 60 times         |
|      Tree Type:  Willow                            |
|      Loads Done: 94                                |
|      Logs Cut:   2,632                             |
|      Logs P/H:   422                               |
|      Levels Up:  0                                 |
|      Experience: 177,660                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/
[6:13:56]: Successfully executed.
this is my second run, first went 5 hrs 30 min, random stopped it.
very nice!

w00t, over night
and during school!

MeetmeDeath

2012-01-10 23:45:29

[Error] (2319:7): Unknown identifier 'drawDotsMulti' at line 2318

im getting this error all of a sudden all worked great till this. i even tried redling it

Firefighter_Emt18

2012-01-11 00:22:30

Every time i run it I get this error:

[Error] (2319:7): Unknown identifier 'drawDotsMulti' at line 2318
Compiling failed.

And this is the line it is referring to:

  // draw points on SMART if setting enabled
    {$IFDEF SMART}
    if (DEBUG_SMART) then
      drawDotsMulti(true, boxesArr);
    {$ENDIF}

Someone help me out and what to do to fix it.

Coh3n

2012-01-11 00:39:34

Sorry, guys. Didn't realize I called that method when I made SRL updates today. Please update to Rev. 75.

st00f

2012-01-11 19:28:06

I would use it, although after one full inventory it goes to the bank, banks, then logs out. :\
Sorry if I'm being retarded.

Edit: I got it fixed, I don't know what the problem is. I'm loving the script, so far 308 logs chopped without much of a problem!

Deload

2012-01-12 12:04:38

Vein

2012-01-12 17:16:20

99 Doors

2012-01-12 19:03:41

Should "Draynor Chop N' Bank (Rev. 75).zip" be extracted to "C:\Simba\Scripts"?

Coh3n

2012-01-12 19:35:58

From: 99 Doors
Should "Draynor Chop N' Bank (Rev. 75).zip" be extracted to "C:\Simba\Scripts"?

That's where I have it, but you can extract it to wherever you want.

xxgoubxx

2012-01-13 09:45:16

Will post a proggie soon

Deload

2012-01-13 21:31:06

99 Doors

2012-01-13 21:34:29

Vein

2012-01-14 07:10:16

From: Deload
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 75 - |
|====================================================|
| 12 Hours, 34 Minutes and 18 Seconds |
|────────────────────────────────────────────────────|
| Player: 0 |
| Location: Login Failed |
| Active: False |
| Reason: |
| Tree Type: Willow |
| Loads Done: 224 |
| Logs Cut: 6,048 |
| Logs P/H: 476 |
| Levels Up: 1 |
| Experience: 408,240 |
| Breaks: 0 |
|____________________________________________________|
|____________________________________________________/

new awsome proggy!

Fire Latin

2012-01-14 16:34:14

I have a question. I'm new and still learning this. What does this mean and what can I do to fix it?

[Error] (498:7): Unknown identifier 'drawDotsMulti' at line 497
Compiling failed.

Thank you.

Coh3n

2012-01-16 00:49:57

From: 99 Doors
When I ran the script I got this in the console:

Status: /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
Status: | SRL Randoms Report |
Status: | www.villavu.com |
Status: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Status: \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 75 - |
|====================================================|
| 2 Seconds |
|────────────────────────────────────────────────────|
|____________________________________________________|
|____________________________________________________/
/=======================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 75 - |
|=======================================================================================|
| Ran for: 2 Seconds |
|────── ──────── ──────────── ─────── ──────── ────────── ──────── ──────────── ────────|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|────── ──────── ──────────── ─────── ──────── ────────── ──────── ──────────── ────────|
|───────────────────────────────────────────────────────────────────────────────────────|
| Totals: | 0 | | 0 | 0 | 0 | 0 |
|_______________________________________________________________________________________|
|_______________________________________________________________________________________/
[0:00:02]: Successfully executed.

SMART doesn't even open up. Am I doing something wrong?

That's not an error message, that's just what's printed when the script executes. Change line 2800 to this and run it again, tell me what it says.


//Report_Print;

From: Fire Latin
I have a question. I'm new and still learning this. What does this mean and what can I do to fix it?

[Error] (498:7): Unknown identifier 'drawDotsMulti' at line 497
Compiling failed.

Thank you.

It means you have an outdated version on this script. ;)

L337hax

2012-01-16 00:54:09

[Error] C:\Simba\Includes\SRL/SRL/core/text.simba(681:40): Unknown identifier 'UpChars' at line 680
Compiling failed.

Coh3n

2012-01-16 01:11:56

From: L337hax
[Error] C:\Simba\Includes\SRL/SRL/core/text.simba(681:40): Unknown identifier 'UpChars' at line 680
Compiling failed.

You don't have the fonts. See the FAQ link in my signature, there's a link to manually update them.

bricks

2012-01-16 11:55:25

CURRENTLY NOT WORKING AS OF TODAY'S SYSTEM UPDATE.
It goes to the bank, and then fails to choose the use quickly option, just letting you know :D please fix soon

99 Doors

2012-01-16 16:38:46

From: Coh3n
That's not an error message, that's just what's printed when the script executes. Change line 2800 to this and run it again, tell me what it says.
//Report_Print;
)

I get this in the console now:

[0:00:01]: ___
[0:00:01]: ____ /\__\
[0:00:01]: /\___\ ____ \/ _/
[0:00:01]: _____ \/_ / /\___\ \/ _____
[0:00:01]: /\____\ _______/ / /___ _\/___ \_____ /\____\
[0:00:01]: / / ___\/\______\/ /____\\____/ /_____\/ / ____\
[0:00:02]: / / /__ / / ___ / ____ //___ / ____ \/ /___\
[0:00:02]: / / /___\ / /__/ / / / / /____/ / / / / /____ /
[0:00:02]: \/_______//______/_/ /_/_/______/_/__/_/_/____/ /
[0:00:02]: \/___________________/
[0:00:02]: Draynor Chop N' Bank ~ Revision 75!
[0:00:02]: SRL Compiled in 31 msec
[0:00:02]: SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.
[0:00:02]: Invalid world number or corrupted world list. Please review your settings
[0:00:02]: Successfully executed.

Also, I get no debug file.

Coh3n

2012-01-16 20:43:04

From: bricks
CURRENTLY NOT WORKING AS OF TODAY'S SYSTEM UPDATE.
It goes to the bank, and then fails to choose the use quickly option, just letting you know :D please fix soon

It should work just fine.

From: 99 Doors
I get this in the console now:

[0:00:01]: ___
[0:00:01]: ____ /\__\
[0:00:01]: /\___\ ____ \/ _/
[0:00:01]: _____ \/_ / /\___\ \/ _____
[0:00:01]: /\____\ _______/ / /___ _\/___ \_____ /\____\
[0:00:01]: / / ___\/\______\/ /____\\____/ /_____\/ / ____\
[0:00:02]: / / /__ / / ___ / ____ //___ / ____ \/ /___\
[0:00:02]: / / /___\ / /__/ / / / / /____/ / / / / /____ /
[0:00:02]: \/_______//______/_/ /_/_/______/_/__/_/_/____/ /
[0:00:02]: \/___________________/
[0:00:02]: Draynor Chop N' Bank ~ Revision 75!
[0:00:02]: SRL Compiled in 31 msec
[0:00:02]: SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.
[0:00:02]: Invalid world number or corrupted world list. Please review your settings
[0:00:02]: Successfully executed.

Also, I get no debug file.

This script doesn't save a debug file.

For you error, change the SMART server number in the script setup tab.

bricks

2012-01-17 00:14:24

Still not working

I updated everything, it started not worknig after a recent update in RS. Now everything looks different such as the shadowing of the stats and stuff.

Right after this update I re tried it, and it did not work; It cut the logs fine then ran to the bank and didn't bank them correctly. Please fix still not working.

Syntax

2012-01-17 00:22:58

From: bricks
Still not working

I updated everything, it started not worknig after a recent update in RS. Now everything looks different such as the shadowing of the stats and stuff.

Right after this update I re tried it, and it did not work; It cut the logs fine then ran to the bank and didn't bank them correctly. Please fix still not working.

It'll probably be updated shortly, make sure your forced updated SRL. Remember Simba is a free program so just be patient and let the course of time take effect before its updated.

bricks

2012-01-17 11:45:36

I'll go force all of the updates, thankk you for your response I appreciate it !

bricks

2012-01-17 12:24:39

From: bricks
I'll go force all of the updates, thankk you for your response I appreciate it !

Yes, everything is updated once again and the script is still not banking correctly.

Coh3n

2012-01-17 13:56:51

From: bricks
Yes, everything is updated once again and the script is still not banking correctly.

Don't double post, that's what the edit button is for.

I just ran this now and it works fine, but it's typical for leechers to post exactly like you are. Saying it doesn't bank correctly is completely useless. There are 100s of lines of code that handles the banking. You need to give details. Does it open the bank? Does it click the bank? What's the mouse behaviour? Does it click the logs when the bank is open?

We provide you guys with FREE scripts and ask for nothing in return, the least you can do not post stupid things like "This still doesn't work, please fix." That doesn't help anybody.

bricks

2012-01-17 14:53:35

I double posted because I didn't see the 'Edit' button. Also you didn't take into account my first post regarding the error..Ya it runs to the bank and then right clicks it and then fails to click the correct option…As previously stated.
In simba the script says failed to bank logs, and failed to find bank screen.
I also re downloaded it and tried it.
RS system updated, I sat there on my computer botting with this script and watched it.Then logged out, exited Simba, re ran the script, and when I go back to RS it looks completely different and now your script isn't working…is it really just my computer….?

It's fine I suppose, if the script works for the OP, but not for the forum he is providing it to.
"I just ran this now and it works fine" okay..but what i'm saying is it's not working fine. Lets not jump to conclusions but I think there just might be a problem with your script here, i know that's impossible but lets open our minds to accept that the script might not be working currently.
Thanks!

Coh3n

2012-01-17 16:53:37

Choose option was broken by the recent RS update, but it was also fixed recently.

If the script works for me, there's absolutely no reason it shouldn't work for everyone else, unless, of course, the SRL updater is broken, and as far as I know, it's not. Just to prove my point, I ran it again:


/=======================================================================================|
|                          Coh3n's Draynor Chop N' Bank!                                |
|                                 - Revision 75 -                                       |
|=======================================================================================|
|                    Ran for: 19 Minutes and 44 Seconds                                 |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
| Nick | Active | Location   | Loads |  Tree  | Logs Cut | Levels | Experience | Breaks |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472; &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
| ora  | False  | Bank       |  0    | Willow |  0       |   0    |  0         |   0    |
| rod  | False  | Bank       |  0    | Willow |  0       |   0    |  0         |   0    |
| bys  | True   | Bank       |  6    | Willow |  162     |   0    |  10,935    |   0    |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
| Totals:                    |  6    |        |  162     |   0    |  10,935    |   0    |
|_______________________________________________________________________________________|
|                                                                                       |
| False Reasons:                                                                        |
| &#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;                                                                        |
|   0: ora -> User set to false                                                         |
|   1: rod -> User set to false                                                         |
|_______________________________________________________________________________________/

You can say whatever you want about it working for me and not you (which is fine, apparently?), but the reality is, if I can't recreate or even experience the bug, how am I supposed to fix it?

bricks

2012-01-17 17:02:34

I got it working after updating SRL in different ways than before and reducing my graphics .

I apologize lol

Coh3n

2012-01-17 17:05:37

From: bricks
I got it working after updating SRL in different ways than before and reducing my graphics .

I apologize lol

Me too, I was probably a little more blunt than I needed to be. Glad you got it working. :)

humeruzz

2012-01-18 08:12:38

hey… how do i start the bot thingy? i dont know what to fill in at the stat setting thingy? pleasy help me :)

humeruzz

2012-01-18 09:27:00

hey Coh3n,

is it possible to make an ivy cutter anytime? i would really be happy for it and i bet loads of other people would to :)
hope u can reply and make one in the future… btw nice script really works :D

humeruzz

2012-01-18 09:29:17

Skiller121

2012-01-18 10:06:48

hey can someone help it cuts 54 logs and logs out and doesn't log back in or anything can u help and ive selected the right options in the start up

Coh3n

2012-01-18 19:24:09

From: humeruzz
hey Coh3n,

is it possible to make an ivy cutter anytime? i would really be happy for it and i bet loads of other people would to :)
hope u can reply and make one in the future… btw nice script really works :D

I won't be making one, sorry. I may add it to MSI, though as that will be very easy.

From: Skiller121
hey can someone help it cuts 54 logs and logs out and doesn't log back in or anything can u help and ive selected the right options in the start up

You sure you set it up right? Why don't you post some debug so we can actually see what's happening.

washcaps94

2012-01-19 02:11:35

Love the script, one problem though. I keep getting stuck on the tree with the guy hiding in it and after that my cursor never finds the willows again. any reason why this is happening?

Coh3n

2012-01-19 03:19:23

From: washcaps94
Love the script, one problem though. I keep getting stuck on the tree with the guy hiding in it and after that my cursor never finds the willows again. any reason why this is happening?

Bad luck, really. For whatever reason it sometimes ignores the uptext check on the Oak tree or whatever it is. Does it not relocate to the fishing symbol on the minimap?

Can you post what the debug says, please?

washcaps94

2012-01-19 03:25:19

Nope it never relocates. but sure i'll edit this post when i have it!

EDIT: replied below, sorry for the spam

washcaps94

2012-01-19 03:34:36

So it says cannont load uptext. any clue what that means? dont know exactly what you mean by posting the debug but on the bottom of my simba client it just search's for the willow and says cannont load uptext or something along those lines.

10wnu9

2012-01-19 18:38:56

How is your's working when sr5 is out, i want to murder mysled yohojo said change scar to simba, jesus, i am retarded.

Scaper

2012-01-19 22:25:29

nice script just ran on my skiller and stopped manually

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 75 -                   |
|====================================================|
|        3 Hours, 51 Minutes and 35 Seconds          |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 64                                |
|      Logs Cut:   1,728                             |
|      Logs P/H:   447                               |
|      Levels Up:  4                                 |
|      Experience: 116,640                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/
[03:51:35]: Successfully executed.

MaxPayne619

2012-01-20 08:42:19

Great script Coh3n
Analyzed the script, so far its awesome,

but sometimes it does not update the Scanned Willow Trees (refering to the smart painting) it wont update (rarely happens) and thus it keeps on clicking the old paint! —– Rare as i said!

gonna be posting some progress reports later!

Deload

2012-01-20 11:43:48

apamedvapen

2012-01-20 13:22:17

Been using the oak chopper a bit.
Noticed that my character had the skill tab open which caused the bot to not see that the inventory was full, so I think it's been clicking on the same oak constantly for maybe 20 minutes, not knowing it was full.
I don't know how to make scripts so I don't know if it's hard, but maybe a check for the text "your inventory is too full…" could be added?

MaxPayne619

2012-01-20 14:08:12

Max's Report

Status: /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
Status: |     SRL Randoms Report       |
Status: |       [url]www.villavu.com[/url]        |
Status: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Status: | SRL Logs          :        1 |
Status: \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 75 -                   |
|====================================================|
|        4 Hours, 13 Minutes and 0 Seconds           |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   False                                 |
|    Reason:   Failed to find trees 60 times         |
|      Tree Type:  Willow                            |
|      Loads Done: 70                                |
|      Logs Cut:   1,960                             |
|      Logs P/H:   464                               |
|      Levels Up:  8                                 |
|      Experience: 132,300                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/
[4:13:00]: Successfully executed.

laststand

2012-01-20 23:12:57

10coins

2012-01-21 07:56:28

i will try it

KleinePiraat

2012-01-21 09:46:44

Exception: Error while reading stream: File "C:\Users\David\AppData\Local\Temp\Rar$DI21.720\Bitmaps\BGND.png" does not exist at line 1970

whats that N

MaxPayne619

2012-01-21 10:02:27

Works great, but whats the ideal place to train on oaks ?

[CENTER]Status: /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
Status: |     SRL Randoms Report       |
Status: |       [url]www.villavu.com[/url]        |
Status: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Status: \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 75 -                   |
|====================================================|
|        6 Hours, 51 Minutes and 59 Seconds          |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Client Token Changed                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 88                                |
|      Logs Cut:   2,464                             |
|      Logs P/H:   358                               |
|      Levels Up:  14                                |
|      Experience: 166,320                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/[/CENTER]

Coh3n

2012-01-21 14:53:21

From: KleinePiraat
Exception: Error while reading stream: File "C:\Users\David\AppData\Local\Temp\Rar$DI21.720\Bitmaps\BGND.png" does not exist at line 1970

whats that N

You need to download the script to a different spot. All the files need to be in the same folder.

From: MaxPayne619

Works great, but whats the ideal place to train on oaks ?

[CENTER]Status: /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
Status: |     SRL Randoms Report       |
Status: |       [url]www.villavu.com[/url]        |
Status: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Status: \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 75 -                   |
|====================================================|
|        6 Hours, 51 Minutes and 59 Seconds          |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Client Token Changed                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 88                                |
|      Logs Cut:   2,464                             |
|      Logs P/H:   358                               |
|      Levels Up:  14                                |
|      Experience: 166,320                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/[/CENTER]

There are 4 Oak trees just inside the west wall of Varrock Castle. Chop there, and bank at the GE. This script doesn't do that, though.

DeeMR

2012-01-21 16:24:18

I get this error when trying to run the script. I have the .simba file in Simba/Includes but still get this error.

[Error] (498:7): Unknown identifier 'drawDotsMulti' at line 497
Compiling failed.
[Error] (498:7): Unknown identifier 'drawDotsMulti' at line 497
Compiling failed.
[Error] (498:7): Unknown identifier 'drawDotsMulti' at line 497
Compiling failed.

Help please.

apamedvapen

2012-01-21 18:13:39

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 75 -                   |
|====================================================|
|        6 Hours, 45 Minutes and 17 Seconds          |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Oak                               |
|      Loads Done: 112                               |
|      Logs Cut:   2,997                             |
|      Logs P/H:   443                               |
|      Levels Up:  0                                 |
|      Experience: 112,388                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/
[6:45:17]: Successfully executed.

Quite decent, if I may say so.
Got 2 randoms which I had to solve, but I kept an eye on the boy so I solved them myself before being logged out.

Coh3n

2012-01-21 19:13:48

From: DeeMR
I get this error when trying to run the script. I have the .simba file in Simba/Includes but still get this error.

[Error] (498:7): Unknown identifier 'drawDotsMulti' at line 497
Compiling failed.
[Error] (498:7): Unknown identifier 'drawDotsMulti' at line 497
Compiling failed.
[Error] (498:7): Unknown identifier 'drawDotsMulti' at line 497
Compiling failed.

Help please.

Working fine for me will post a proggy in a while love looking at you code it's so crazy good

marsera

2012-01-22 17:57:08

So far its working great, but im just wondering sometimes it would hit the guard in the giant tree, is there any fixes?
Im kinda a newbie to hacking but, for the SRL, I guess thats the random event one? Correct me if im mistaken. If it supports a Random event, and your script is running would it finish the random event, even with your script running?

poopy2177

2012-01-22 18:52:48

From: marsera
So far its working great, but im just wondering sometimes it would hit the guard in the giant tree, is there any fixes?
Im kinda a newbie to hacking but, for the SRL, I guess thats the random event one? Correct me if im mistaken. If it supports a Random event, and your script is running would it finish the random event, even with your script running?

Randoms are solved in something separate than the script when you get in a random the script realizes that you are in one and then srl tries to solve it

Coh3n

2012-01-22 19:37:09

From: kevin33
Hmmm I just downloaded and ran the script and got the same error. I will continue to look into it. TBH the only thing I can think of is that the bitmap does not comply with the new update.
Try using it without the form, that should work for now. Coh3n will fix it when he is on.

You shouldn't get an error if you downloaded it correctly. You have to make sure all the files are in the same folder.

kevin33

2012-01-22 19:38:59

Its ok Coh3n, Im not actually using the script I was just trying to help the others with the problem.

apamedvapen

2012-01-23 10:28:15

Status: /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
Status: |     SRL Randoms Report       |
Status: |       [url]www.villavu.com[/url]        |
Status: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Status: | SRL Logs          :        3 |
Status: | Lamps Solved      :        1 |
Status: | Reward Box Solved :        1 |
Status: \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 75 -                   |
|====================================================|
|        8 Hours, 58 Minutes and 17 Seconds          |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Client Token Changed                  |
|    Active:   True                                  |
|      Tree Type:  Oak                               |
|      Loads Done: 67                                |
|      Logs Cut:   1,809                             |
|      Logs P/H:   201                               |
|      Levels Up:  3                                 |
|      Experience: 67,838                            |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/
[8:58:17]: Successfully executed.

Don't really know if 1800 oak logs in 8 hours is that good, but hey, it actually ran for 8 hours straight!

EDIT: at a closure look it's actually almost 9 hours it ran without issues!

liam1294

2012-01-23 20:06:09

Exception in Script: Unable to find file 'SRL/SRL.simba' used from ''
what did i do wrong?

Kyle Undefined

2012-01-24 10:19:40

You haven't updated to SRL 5 yet.

kevin33

2012-01-24 18:50:11

BTW the error I was getting and the other guy was getting about the:
File "C:\Simba\Scripts\Bitmaps\BGND.png" does not exist at line 1970
I figured out how to fix. You have to unzip the file first and when it gives you the folder, open it from there!

chiefcharlie

2012-01-24 19:52:55

its not banking for me it stands around and acts like its looking for the banker but never clicks on it then evnutally logs out "ERROR: Bank_Logs: Failed to open bank, retrying…
[0:08:08]: SUCCESS: Bank_Logs: Found bank symbol! Relocating…
[0:08:09]: DETAIL: Bank_Logs: Failed to open bank after 40 tries"

nvm i think i fixed it had detail on high instead of low

kevin33

2012-01-24 21:27:08

LMNOP3

2012-01-24 21:53:17

Im new at this so imma keep it brief, it says

formWriteIn: Exception in Script: Unable to find file 'SRL/SRL.simba' used from
"

can anyone tell me whats wrong and how i can fix it?

LMNOP3

2012-01-24 21:55:39

hey :|)

dvsilverwing

2012-01-24 22:10:31

| - Revision 75 - |
|====================================================|
| 1 Hours, 27 Minutes and 12 Seconds |
|────────────────────────────────────────────────────|
| Player: 0 |
| Location: Bank |
| Active: True |
| Tree Type: Willow |
| Loads Done: 23 |
| Logs Cut: 644 |
| Logs P/H: 443 |
| Levels Up: 0 |
| Experience: 43,470 |
| Breaks: 0 |
|____________________________________________________|
|____________________________________________________/

Couldn't be more perfect, didn't have one problem going from 45-54 Woodcutting whatsoever (albeit using Skoll's Boots, didn't have to cut as many logs as you'd think). It banked perfectly, cut perfectly, did everything as perfect as a script could, really. I'd love to make the most more useful with criticism, but there is honestly nothing wrong with the Draynor Willow Chopping/Banking I can even criticize.

LMNOP3

2012-01-25 11:33:20

now once i get in the game it doesnt work, my player doesnt move at all and i filled out everything right, why?

dvsilverwing

2012-01-25 16:32:07

From: LMNOP3
now once i get in the game it doesnt work, my player doesnt move at all and i filled out everything right, why?

Make sure your Screen Size is set to Fixed and your graphics are at Minimum or Low, also make sure it IS playing inside Simba and Smart is enabled at the bottom of the RS Client it the script opens. Also, you should be near the trees you're trying to cut or in the Draynor bank.

kevin33

2012-01-25 19:10:56

onexisfree

2012-01-26 01:12:08

im getting this error plz help

Exception: Error while reading stream: File "C:\Users\admin\Desktop\programs\Bot's & runescape folder\simba\scrips\Bitmaps\BGND.png" does not exist at line 1970

usb1y

2012-01-26 11:53:15

anyone getting a uptext error?
LIKE
ERROR: Unable to find uptext (chop tree) idk what this means is it bad?

kevin33

2012-01-26 14:19:47

From: onexisfree
im getting this error plz help

Exception: Error while reading stream: File "C:\Users\admin\Desktop\programs\Bot's & runescape folder\simba\scrips\Bitmaps\BGND.png" does not exist at line 1970

After you download the script in zipped form, you must unzip it into a folder using winzip or winrar (sorry no link atm just google it if you have to). Then open the folder click on the simba one so itll open then run.

motokid64

2012-01-26 19:38:31

This script works wonders =) I'll have to report if I hit any problems later on. As of right now I'm running on an hour w/o any issues though

usb1y

2012-01-27 00:21:43

Did you get any uptext errors of any kind?

onexisfree

2012-01-27 02:15:10

works well ..will be posting progress report..=] "ty good scrip"!!!!!!!!!!

onexisfree

2012-01-27 03:54:58

practical

2012-01-27 11:47:46

Thanks for the share.

Suggestion- Get the script to search for a tree while its cutting. The bot pauses for like 10 seconds after each tree.

conman15

2012-01-27 15:18:30

Seems to not be able to bank after getting a full inv of oaks

bigmike6675

2012-01-27 15:51:04

for the oaks, ive noticed it goes between oak logs and normal logs is this something i may have set up wrong?

Ironduke

2012-01-27 16:20:51

Nevermind, Fixed. I'll give you a progress report when I get to 50.

Dildo_Stalin

2012-01-29 03:29:14

Works great :D Only problem is, it sometime clicks on a regular tree when going for the oak tree closest to the bank. (East)

Sunblast

2012-01-29 07:36:23

Exception: Error while reading stream: File "C:\Users\Gebruiker\Downloads\Bitmaps\BGND.png" does not exist at line 1970

YILDIRIM

2012-01-29 07:47:59

Dildo_Stalin

2012-01-29 13:21:51

Your latest error.

[0:02:52]: DETAIL: Chop_Trees: Boxes Found: 1
[0:02:52]: DETAIL: Chop_Trees: Length tmpATPA[0]: 211
[0:02:52]: DETAIL: Chop_Trees: Length tmpATPA[1]: 46
[0:02:52]: DETAIL: Find_Randoms: Scanning for random events…
[0:02:52]: DETAIL: Chop_Trees: Length tmpATPA[2]: 2
[0:02:52]: DETAIL: Find_Randoms: Scanning for random events…
[0:02:53]: ERROR: Chop_Tree: Failed to find uptext

That itself makes the script slower IMO/I've noticed, either or i'll be sure to post a proggy when its done in a few hours.
Also how long are the breaks that your script takes?

kevin33

2012-01-29 15:51:38

From: Sunblast

Exception: Error while reading stream: File "C:\Users\Gebruiker\Downloads\Bitmaps\BGND.png" does not exist at line 1970

That error means you have to unzipped the file you downloaded in order to run it. You need Winrar or winzip in order to do this. Download one of them off the internet. they are free

SlyPig

2012-01-30 08:15:19

I think maybe the camera angle needs to change more often, i was watching mine run and it's just standing at one tree waiting for it to respawn everytime it gets cut down. For Oaks that is.. not tried willows yet

Coh3n

2012-01-30 18:53:43

From: SlyPig
I think maybe the camera angle needs to change more often, i was watching mine run and it's just standing at one tree waiting for it to respawn everytime it gets cut down. For Oaks that is.. not tried willows yet

For Oaks there's usually only one in the screen at a time anyway.

SlyPig

2012-01-30 19:42:54

From: Coh3n
For Oaks there's usually only one in the screen at a time anyway.

True, it didn't do that all the time. Willows are working surprisingly well at the moment even though it did fail to do the dragon teacher random.

Scene

2012-01-31 01:06:44

when i hit run in simba, i get this

ThreadSafeCall('Form_InitForm', varArr);

[0:00:01]: /\____\ _______/ / /___ _\/___ \_____ /\____\
[0:00:01]: / / ___\/\______\/ /____\\____/ /_____\/ / ____\
[0:00:01]: / / /__ / / ___ / ____ //___ / ____ \/ /___\
[0:00:01]: / / /___\ / /__/ / / / / /____/ / / / / /____ /
[0:00:01]: \/_______//______/_/ /_/_/______/_/__/_/_/____/ /
[0:00:02]: \/___________________/
[0:00:02]: Draynor Chop N' Bank ~ Revision 75!
Exception: Error while reading stream: File "Bitmaps\BGND.png" does not exist at line 1970

any help please?

kevin33

2012-01-31 01:16:51

You have to unzip the file you download using winrar or winzip (free just download after you google them). When you unzip it, you will get a whole file, open it, hit the copy, hit the simba one, and fill in your deatails and run. GL

Scene

2012-01-31 01:25:09

You have to unzip the file you download using winrar or winzip (free just download after you google them). When you unzip it, you will get a whole file, open it, hit the copy, hit the simba one, and fill in your deatails and run. GL

just got the same error message.

Coh3n

2012-01-31 01:54:18

Any of you know what a .zip file is? It's an archive (compressed folder). It has to be unzipped or expanded before it can be used (in most cases). It says to do that in the instructions. Once you do that, you don't get any missing bitmap errors.

kevin33

2012-01-31 01:54:48

Lol I just told them that and they still dont know :)

NickMystre

2012-01-31 02:02:35

From: Coh3n
Any of you know what a .zip file is? It's an archive (compressed folder). It has to be unzipped or expanded before it can be used (in most cases). It says to do that in the instructions. Once you do that, you don't get any missing bitmap errors.

I've your post and I still can't believe it. :google:

Epsilon

2012-01-31 02:03:41

Fails to bank properly. Settings are at lowest, and screen is in the fixed position.

[0:30:28]: DETAIL: Find_Randoms: Scanning for random events...
[0:30:28]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:30:28]: ERROR: Bank_Logs: Failed to find bank symbol
[0:30:28]: DETAIL: Find_Randoms: Scanning for random events...
[0:30:29]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:30:29]: ERROR: Bank_Logs: Failed to find bank symbol
[0:30:29]: DETAIL: Find_Randoms: Scanning for random events...
[0:30:29]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:30:29]: ERROR: Bank_Logs: Failed to find bank symbol

SlyPig

2012-01-31 09:19:39

Well it was working until after that update just now..

Now mine keeps running to random trees almost spam clicking a lot instead of staying at one tree, and it apparently can't find the banker.

Update screwed with the bot?

bricks

2012-01-31 12:07:01

Yes, the new update has my left my bot not working.
Right clicks the banker, yet fails to open the bank.

I updated SRL also.

Kyle Undefined

2012-01-31 12:51:56

Please be patient, devs are working on fixing the include for the new update.

tallmantreee

2012-01-31 20:33:32

Just downloaded it im gonna start it on a fresh so im manually getting lvl 15 then ima try it out in the meantime figure out this set up. Thanks for the scirpt looks great!

Edit: Just the script up and working but becuase of the new update it wont bank and it chops a regular tree every now and then ima babysit it and hope the update comes soon but still great script seems fast gonna be using this for dayz :)

Edit: Okay so i let it run for a bit and bank seemed to work after i waited for it to fill a load, then disable smart then bank then reenable it started banking fine, but it chopped alot of plain trees and i was doing oaks.
Status: /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
Status: | SRL Randoms Report |
Status: | www.villavu.com |
Status: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Status: \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 75 - |
|====================================================|
| 44 Minutes and 35 Seconds |
|────────────────────────────────────────────────────|
| Player: 0 |
| Location: Oaks |
| Active: True |
| Tree Type: Oak |
| Loads Done: 3 |
| Logs Cut: 56 |
| Logs P/H: 75 |
| Levels Up: 77 |
| Experience: 2,100 |
| Breaks: 0 |
|____________________________________________________|
|____________________________________________________/

bricks

2012-01-31 21:43:56

It is currently working thank you developers!!!!

In the coming months I will donate a siginificant amount.

SlyPig

2012-01-31 22:06:55

Working for me too, good job devs.

Too bad yews don't work still.

Coh3n

2012-02-01 01:16:01

From: SlyPig
Working for me too, good job devs.

Too bad yews don't work still.

This script doesn't cut yews.

SlyPig

2012-02-01 05:35:19

From: Coh3n
This script doesn't cut yews.

I meant the other scripts, this one is working good.

Pl4nK

2012-02-04 09:11:43

Exception: Error while reading stream: File "C:\JONATHAN\Simba\Scripts\Bitmaps\BGND.png" does not exist at line 1970

I have read as much as i can before questioning again, but i unzip the script and save it into the same folder where simba is

HELP ME PLEASE!

Themanhunt1

2012-02-04 11:41:45

Bug found: Will not select correct world. I input world 11 say, and it selects any random world.

Themanhunt1

2012-02-04 11:42:51

Bug found: Sometimes chopps a normal tree instead of an oak tree.

whatev

2012-02-04 14:49:55

thank you. first non-combat 99. f2p as well!

Themanhunt1

2012-02-04 15:54:28

Bug Found: Takes 10-20 seconds to swap to a new tree.

Coh3n

2012-02-04 17:16:39

From: Themanhunt1
Bug found: Will not select correct world. I input world 11 say, and it selects any random world.

I think that's an SRL bug, but I'll try to take a look when I have time.

From: Themanhunt1
Bug found: Sometimes chopps a normal tree instead of an oak tree.

I know, that's an uptext issue. There's nothing I can do about that. You'll just have to deal with it.

From: Themanhunt1
Bug Found: Takes 10-20 seconds to swap to a new tree.

Not for me? Seems to work fine for everyone else as well. Unless you're talking about Oaks, in which case I think it just waits for the tree to spawn.
___________________

Also, don't double post, that's what the edit button is for.

@whatev: I'll add 99's achieved to the first post. :)

Themanhunt1

2012-02-04 17:37:19

I was on oaks, and 10-20 seconds happens often.

Typically, I start up the script next to the oak tree (next to the bank) and it would do nothing for a while, then may attempt to cut the oak.

Nsight

2012-02-04 20:22:32

Godric

2012-02-04 22:51:23

Thanks, giving it a try, looking great.

princenath

2012-02-04 22:52:15

where to extract plz tell

Coh3n

2012-02-05 03:11:41

From: princenath
where to extract plz tell

If you read the first post you would see that is says to extract anywhere you want.

bloodpk 998

2012-02-05 05:54:28

it dosnt work for me it says searching for random why ? and can you list the id for the logs pls i have found they im internet but for other persons

r Detail: False.
[00:02:46]: Loading, please wait…
[00:02:46]: DETAIL: Find_Randoms: Scanning for random events…
[00:02:46]: PLAYER: Find_PlayerLocation: ——: Location = Bank
[00:02:49]: PLAYER: Setup_Player: ——: Current Woodcutting level: 61
[00:02:50]: SUCCESS: Setup_Player: Found hatchet!
[00:02:56]: SUCCESS: Walk_ToLoc: Walked to location: Willows
[00:02:57]: DETAIL: Chop_Trees: Boxes Found: 0
[00:02:57]: ERROR: Chop_Trees: Failed to find tree
[00:02:57]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:00]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:01]: DETAIL: Chop_Trees: Boxes Found: 0
[00:03:01]: ERROR: Chop_Trees: Failed to find tree
[00:03:01]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:03]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:04]: DETAIL: Chop_Trees: Boxes Found: 0
[00:03:04]: ERROR: Chop_Trees: Failed to find tree
[00:03:04]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:07]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:07]: DETAIL: Chop_Trees: Boxes Found: 0
[00:03:07]: ERROR: Chop_Trees: Failed to find tree
[00:03:07]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:11]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:11]: DETAIL: Chop_Trees: Boxes Found: 0
[00:03:11]: ERROR: Chop_Trees: Failed to find tree
[00:03:11]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:14]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:15]: DETAIL: Chop_Trees: Boxes Found: 0
[00:03:15]: ERROR: Chop_Trees: Failed to find tree
[00:03:15]: DETAIL: Find_Randoms: Scanning for random events…

Godric

2012-02-05 11:01:58

It doesn't work properly at port sarim willow spot.

Smidqe

2012-02-05 11:08:24

From: Godric
It doesn't work properly at port sarim willow spot.

This script works only for Draynor village willows/oaks.

alifarhan112

2012-02-05 13:52:09

can u make it drop ?
becouse it go to bank and then dont bank it

robin1334

2012-02-05 15:31:33

i get this error please help i can't find the fix on the forms
http://oi44.tinypic.com/35kjspz.jpg

Coh3n

2012-02-05 16:21:54

From: robin1334
i get this error please help i can't find the fix on the forms
http://oi44.tinypic.com/35kjspz.jpg

You need to download the latest version of the script.

dread4

2012-02-05 18:45:45

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 75 -                   |
|====================================================|
|        1 Hours, 44 Minutes and 30 Seconds          |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 24                                |
|      Logs Cut:   648                               |
|      Logs P/H:   372                               |
|      Levels Up:  19                                |
|      Experience: 43,740                            |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/
[01:44:30]: Successfully executed.

Thanks man awesome script espec since im a skiller just thought id give a quick proggy ;D!

Godric

2012-02-05 19:08:07

From: robin1334
i get this error please help i can't find the fix on the forms
http://oi44.tinypic.com/35kjspz.jpg

On Simba Client, Click tools and click Update.
Plus, each individual updates for SRL-SPS-MSI.
then ur good to go!

Godric

2012-02-05 20:42:33

it was going well for 2 hours when it stopped for random events! (Evil Twin Sister). :(

Batteries

2012-02-05 21:51:46

Giving this a try as the first script I use from here.. ^.^

dread4

2012-02-06 11:46:25

Godric

2012-02-06 18:54:36

dreaya

2012-02-06 22:36:19

Script does absolutely nothing, after i set everything up. it opens smart and sits till it shuts itself off… am i doing something wrong?

kevin33

2012-02-06 23:51:41

Probably yes. Explain to us what it says when it logs you out. Explain, if need be, how you set it up. Do you have the latest version? Everything up to date also?

GetFresh

2012-02-07 00:15:28

Amazing script. I've gotten 54-74 wc. :)

Godric

2012-02-07 21:02:52

Works like a boss for me atm.

If there was a auto random event solver, i would get 100h proggies with this Script!

Best WC Bot on this forum.

Draynor Chop N' Bank (Willow/Oak) | By Coh3n

I ll post my Proggie, when it ends (stops by it self).

Coh3n

2012-02-07 21:34:57

Glad you like it, Godric! :) I'm working on solving all the randoms right now. You can check out the progress here if you wish.

Godric

2012-02-08 16:17:15

From: Coh3n
Glad you like it, Godric! :) I'm working on solving all the randoms right now. You can check out the progress here if you wish.

Sure,
thanks,
Good Luck.

Blakerey

2012-02-08 16:58:14

Love this script. However, i've had to disable SMART, and move the angle a few times myself, as it just want's to attack that man in that tree… :redface:

lightstabo

2012-02-08 19:38:35

Mine keeps stopping after roughly 1.5 hours, is there a way to keep it running longer?

kevin33

2012-02-08 19:48:13

Why exactly does it stop? If you fix that problem, it will run longer.

kevin33

2012-02-09 08:20:18

Emotional

2012-02-09 18:08:59

Exception: Error while reading stream: File "C:\Users\tony\AppData\Local\Temp\Rar$DI05.392\Bitmaps\BGND.png" does not exist at line 1970

kevin33

2012-02-09 21:30:13

It is a ZIPPED FILE. After you download you must UNZIP it using winrar or winzip )download free off google). When you unzip it into a folder, this error will not appear.

Kyle Undefined

2012-02-10 00:40:27

I suggest 7zip, it is MUCH better than those programs. You also have to move those zipped files to where they are needed, most likely where the script is.

Godric

2012-02-10 01:06:09

Coh3n

2012-02-10 02:01:01

From: Kyle Undefined
I suggest 7zip, it is MUCH better than those programs. You also have to move those zipped files to where they are needed, most likely where the script is.

The script and files are all in one archive. They just have to extract it literally anywhere and it will work.

NewHitman

2012-02-10 10:07:05

Thanks! Trying it out now, im new to this Coloured Botting Thing.. :)

maniakas

2012-02-10 10:26:07

Hi i've got a proplem.

I filled all information in the simba, then another box opens: WORLD, SRL stats member or not and stuff like that. But Tick to disable smart and it says "please fill out all requried field for player1.". I tired everything but still doesn't work for me :( HELP :D

maniakas

2012-02-10 10:27:45

If you need to extract this think WinZip is the best software to do that. Here is the link to download it. http://www.winzip.com/prod_down.htm
Its the best of the best ;)

Emotional

2012-02-10 23:46:56

i Un zipped it with winrar and extracted, but it still gives me this error!!
ThreadSafeCall('Form_InitForm', varArr);

Emotional

2012-02-11 03:00:03

i got it started, seems that i got the wrong thing extracted? any ways, now im where i fill out the form, and when i click start script, it shows up Please fill out all player fields for player 1. – so i do this – same thing happens, click the ? mark at bottom right, read instructions 3 times, closed it refilled everything, same problem, help?

jctnd

2012-02-11 03:02:13

im gettin an error somthin like cant comppile or somthin :/

iDrewTouch

2012-02-11 17:28:15

I am still running it and my time is 4 hours 33 minutes. This is a very stable script. I will be running it all night tonight while I am away from home.
Great job.

iDrewTouch

2012-02-11 21:34:55

edvvard

2012-02-12 21:53:20

haxine

2012-02-13 15:50:41

nitrax

2012-02-13 22:20:25

what if the genie or some person pops out and tele me to a bee hive place or something like that… is there anything you can do about that.. does it log out? just wondering

oh and can i have 2 hatches in the first 3 slots just incase one brakes? how does that work

thx a bunch!!! :)

DeiJaiVui

2012-02-17 07:36:03

I get this error.

[0:00:00]: ___
[0:00:01]: ____ /\__\
[0:00:01]: /\___\ ____ \/ _/
[0:00:01]: _____ \/_ / /\___\ \/ _____
[0:00:01]: /\____\ _______/ / /___ _\/___ \_____ /\____\
[0:00:01]: / / ___\/\______\/ /____\\____/ /_____\/ / ____\
[0:00:01]: / / /__ / / ___ / ____ //___ / ____ \/ /___\
[0:00:01]: / / /___\ / /__/ / / / / /____/ / / / / /____ /
[0:00:01]: \/_______//______/_/ /_/_/______/_/__/_/_/____/ /
[0:00:01]: \/___________________/
[0:00:02]: Draynor Chop N' Bank ~ Revision 75!
Exception: Error while reading stream: File "C:\Users\Ti\AppData\Local\Temp\Rar$DI00.770\Bitmaps\BGND.png" does not exist at line 1970

E: Nevermind, fixed it myself :).

Angecide

2012-02-17 07:58:58

i cant even get it running, it does not log in,

DeiJaiVui

2012-02-17 20:00:15

It's too fast, before it even runs to a tree it tries to click another, even while cutting.

tiggerred

2012-02-18 19:53:13

Exception: Error while reading stream: File "C:\Users\tybrow1\AppData\Local\Temp\Rar$DI79.192\Bitmaps\BGND.png" does not exist at line 1970

Snorlax

2012-02-18 21:20:11

You got further than me with this one. Worked great for me a few days ago now I can't even get past the log in screen. :(

kevin33

2012-02-18 22:12:26

You have to winzip (unzip) or winrar the file so it extracts. Then you click on the extracted version, open it up, fill out your stuff and run.

Snorlax

2012-02-18 23:26:02

I do all of this then tell it to run, it fires up smart and loads the log in screen but does not advance any further. I let it sit for 5 minutes and nothing happened so I disabled smart, logged myself into the world, loaded the game and proceeded to try to run it again but then it just closed my current smart window and loaded me a new one where it of course got stuck again :duh:.

Yes I am also filling in my account info on the 2nd tab.

PotentPK

2012-02-19 01:16:52

Coh3n, this is flawless. I will post a progress report later.

Status: /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
Status: |     SRL Randoms Report       |
Status: |       [url]www.villavu.com[/url]        |
Status: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Status: | SRL Logs          :        1 |
Status: \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 75 -                   |
|====================================================|
|        6 Hours, 31 Seconds                         |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Oaks                                  |
|    Active:   False                                 |
|    Reason:   Failed to find hatchet                |
|      Tree Type:  Oak                               |
|      Loads Done: 104                               |
|      Logs Cut:   2,912                             |
|      Logs P/H:   484                               |
|      Levels Up:  128                               |
|      Experience: 109,200                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/
[6:00:31]: Successfully executed.

Status: /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
Status: |     SRL Randoms Report       |
Status: |       [url]www.villavu.com[/url]        |
Status: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Status: | SRL Logs          :        1 |
Status: \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 75 -                   |
|====================================================|
|        5 Hours, 58 Minutes and 43 Seconds          |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   False                                 |
|    Reason:   Failed to find trees 60 times         |
|      Tree Type:  Oak                               |
|      Loads Done: 97                                |
|      Logs Cut:   2,716                             |
|      Logs P/H:   454                               |
|      Levels Up:  133                               |
|      Experience: 101,850                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/
[5:58:43]: Successfully executed.

Azhar

2012-02-19 12:07:56

0:00:00]: ___
[0:00:01]: ____ /\__\
[0:00:01]: /\___\ ____ \/ _/
[0:00:01]: _____ \/_ / /\___\ \/ _____
[0:00:01]: /\____\ _______/ / /___ _\/___ \_____ /\____\
[0:00:01]: / / ___\/\______\/ /____\\____/ /_____\/ / ____\
[0:00:01]: / / /__ / / ___ / ____ //___ / ____ \/ /___\
[0:00:01]: / / /___\ / /__/ / / / / /____/ / / / / /____ /
[0:00:01]: \/_______//______/_/ /_/_/______/_/__/_/_/____/ /
[0:00:01]: \/___________________/
[0:00:02]: Draynor Chop N' Bank ~ Revision 75!
Exception: Error while reading stream: File "C:\Users\Ti\AppData\Local\Temp\Rar$DI00.770\Bitma ps\BGND.png" does not exist at line 1970

Same error

kevin33

2012-02-19 14:12:11

YOU MUST UNZIP THE FILE USING WINZIP OR WINRAR in order to use it

The Killer

2012-02-19 15:16:46

very nice script ran it earlier while i was out
progress report:

/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 75 - |
|====================================================|
| 6 Hours, 2 Minutes and 34 Seconds |
|────────────────────────────────────────────────────|
| Player: 0 |
| Location: Client Token Changed |
| Active: True |
| Tree Type: Willow |
| Loads Done: 94 |
| Logs Cut: 2,632 |
| Logs P/H: 435 |
| Levels Up: 8 |
| Experience: 177,660 |
| Breaks: 0 |
|____________________________________________________|
|____________________________________________________/

idk why but it crashed, but running for 6 hours is very gd, gl at making it fawless

aepsilon

2012-02-19 16:45:25

Hi,

I'm loving this script. Works very smoothly. I have a question though. In the CLI, it says the program scans for random events quite frequently. However, when it does get a random, it just logs out after it can't find a tree for a while. Is this program supposed to complete the random events on its own?

xtrapsp

2012-02-19 18:04:16

From: aepsilon
Hi,

I'm loving this script. Works very smoothly. I have a question though. In the CLI, it says the program scans for random events quite frequently. However, when it does get a random, it just logs out after it can't find a tree for a while. Is this program supposed to complete the random events on its own?

Randoms are still buggy at the moment amigo. Probably due to an update or something.

Coh3n

2012-02-19 20:26:00

From: kevin33
YOU MUST UNZIP THE FILE USING WINZIP OR WINRAR in order to use it

Just ignore everyone who asks that question. If they can't learn to read the first post, let them be.

From: aepsilon
Hi,

I'm loving this script. Works very smoothly. I have a question though. In the CLI, it says the program scans for random events quite frequently. However, when it does get a random, it just logs out after it can't find a tree for a while. Is this program supposed to complete the random events on its own?

The randoms solving is in SRL, not the script. A new system has been written and is available for testing here if you're interested.

Striken

2012-02-19 23:11:41

So far so good. Works fine for me :D

NeoX

2012-02-21 08:45:03

One of the best scripts. Thank you :0

DeiJaiVui

2012-02-22 03:30:02

It chops another tree before it gets a log from the first one. How do I fix this?

macdaddy987650

2012-02-22 06:53:42

need help, cont get script to work and im not sure why. this is what keeps coming up."Exception: Error while reading stream: File "C:\Users\Stevo\AppData\Local\Temp\Rar$DIa0.032\Bitmaps\BGND.png" does not exist at line 1970" Im very new at these things and i read the first post (because of the comments i read about "being to lazy to read the first post") about 6 times and just have no clue as to what to do about this. ps have read about 6 pages of these post's hoping to find a solution but i just cant.

kevin33

2012-02-22 08:21:10

Unzip the file using winzip or winrar. You obviously didnt search cuz its on every page Id bet as I have answered this question tons of times.

macdaddy987650

2012-02-23 09:39:16

AS MENTIONED ABOVE^ im very new at these things, i thought i did unzip the file. I thought i should ask since i wasent getting it. But regardless thank you for pointing out my error, next time i shall make 200% sure i covered everything before i ask a QUESTION.

kevin33

2012-02-23 10:03:25

Not a problem. happy to help. feel free to ask questions anytime

Lynchh

2012-02-24 03:12:18

You can also use Power Archiver as well ;)

kazzos

2012-02-25 18:38:41

testing the script out now. A few problems is it normal for the script to spam scanning for randoms continuously and also it is a bit slow on cutting the oak trees. it could be sitting in front of an oak and not chop it for some reason. thanks for script though

I am Karma

2012-02-26 01:47:32

I ran the script for 6 hours and 32 minutes and got 122382 exp and 41-55 wc
<3 thanks

kodasbean

2012-02-26 20:19:53

Exception: Error while reading stream: File "C:\Users\Hunter\AppData\Local\Temp\Rar$DIa0.170\Bitmaps\BGND.png" does not exist at line 1970

kevin33

2012-02-26 20:48:56

OMG. Dude read the first post and look before you post. This errror has come up too many times but the answer is simple and has been posted too many times.
ANYONE WITH THIS ERROR:
FIRST OFF HIT THE DOWNLOAD LINK IN THE FIRST POST
SECOND SAVE IT
THIRD DOWNLOAD WINZIP OR WINRAR OFF THE INTERNET
FOURTH UNZIP THE FILE USING WINZIP OR WINRAR
FIFTH OPEN YOUR NEW FOLDER, LOAD THE CLIENT, ENTER ALL YOUR INFO/FILL OUT THE FORM FULLY
SIXTH ENJOY BOTTING!!!!!

Please stop posting this error.

evil1234221

2012-02-28 15:46:11

ThreadSafeCall('Form_InitForm', varArr);
error

dewrange

2012-02-28 17:10:55

in all honesty, don't be so incompetent. a folder labeled bitmaps is in the .zip that you downloaded. the error you got says it cant find an image in the bitmap folder in a specific location.

easy fix, unzip the bitmap folder into the location its looking for it in.

please, these forums are to learn how to code and better yourself more than they are for botting. at least try and learn something while you are here.

kazzos

2012-02-29 05:31:47

great script keep it up

DevilSlay

2012-02-29 14:17:39

I am having a problem starting the script it keeps on saying that i should fill in the player setup with numbers even though i need to type in my username with letters. Please can someone help me and help is appreciated.

SupLol

2012-02-29 14:41:48

eebenpuu

2012-03-02 02:31:21

[Error] (142:3): Unknown identifier 'HowManyPlayers' at line 141
Compiling failed.

auddizimo

2012-03-02 22:19:29

The script was working well for me.. until it hit a wall at the Mime random event. Then I stopped the script, and whenever I start it back up… it'll load, put in my account info, choose the world, but then it'll stop the script.. I'm a little confused as to what's going on.. Thanks for the help if any.

kevin33

2012-03-02 23:12:24

Please tell us what the debug says about what is happening. Can you be more specific like what exactly isnt working. Does it choose the wrold?

eebenpuu

2012-03-03 05:59:56

Works way better than the one in the MSI, thanks :)

GetFresh

2012-03-03 10:20:02

This script is such a boss!

auddizimo

2012-03-03 21:04:20

How do I use the script setup instead of the player form? I want to enter in multiple accounts. Thanks!

kevin33

2012-03-03 22:31:52

From: auddizimo
How do I use the script setup instead of the player form? I want to enter in multiple accounts. Thanks!

Okay in order to not use the form, fill out all your info in the required sections for multi player support. Scroll down to line 58 after you are done this, It will say USE_FORM = True;
Change this to say False and it wont load the form. Hope this helps :)

Coh3n

2012-03-04 02:20:45

From: auddizimo
How do I use the script setup instead of the player form? I want to enter in multiple accounts. Thanks!

The form can store up to 6 accounts. If you have more than that, do what kevin33 said.

auddizimo

2012-03-07 09:35:44

Yea, I can see that I'm able to enter up to 6 accounts, however they all are not able to run simultaneously? How would I get the script to run without having to use the fancy player form and instead just the script info? Thanks! Sorry.. Im still a bit noobish to Simba.

Coh3n

2012-03-07 15:16:35

From: auddizimo
Yea, I can see that I'm able to enter up to 6 accounts, however they all are not able to run simultaneously? How would I get the script to run without having to use the fancy player form and instead just the script info? Thanks! Sorry.. Im still a bit noobish to Simba.

You'd have to open separate Simba's. If you don't use the form, they still won't run simultaneously, they'll rotate through like they do when you use the form.

whatev

2012-03-07 15:33:52

From: Coh3n
You'd have to open separate Simba's. If you don't use the form, they still won't run simultaneously, they'll rotate through like they do when you use the form.

couldn't you just make copies of the script with different account credentials and run them separately?

Joe

2012-03-07 16:05:57

Why is it in a .ZIP file?

es revolt

2012-03-07 16:55:07

Great!

es revolt

2012-03-07 18:12:30

[0:01:39]: DETAIL: Find_Randoms: Scanning for random events...
[0:01:40]: ***** Found Random: Freaky Forester *****
[0:01:43]: FF_WalkToCenter: Walking to the center area
[0:01:48]: FF_WalkToCenter: Walking to the center area
[0:01:54]: FF_WalkToCenter: Walking to the center area
[0:01:58]: FF_WalkToCenter: Walking to the center area
[0:02:03]: FF_WalkToCenter: Walking to the center area
[0:02:06]: FF_WalkToCenter: Walking to the center area
[0:02:13]: FF_WalkToCenter: Walking to the center area
[0:02:16]: FF_WalkToCenter: Walking to the center area
[0:02:20]: FF_WalkToCenter: Walking to the center area
[0:02:24]: FF_WalkToCenter: Walking to the center area
[0:02:28]: FF_WalkToCenter: Walking to the center area
[0:02:31]: FF_WalkToCenter: Walking to the center area
[0:02:35]: FF_WalkToCenter: Walking to the center area
[0:02:41]: FF_WalkToCenter: Walking to the center area
[0:02:44]: FF_WalkToCenter: Walking to the center area
[0:02:50]: FF_WalkToCenter: Walking to the center area

Coh3n

2012-03-07 19:23:12

From: whatev
couldn't you just make copies of the script with different account credentials and run them separately?

Yes, that's what I meant when I said use separate Simbas.

From: JOEbot
Why is it in a .ZIP file?

Because there is more than just the .simba file. There's all the bitmaps used for the form, and a sound file.

From: es revolt

[0:01:39]: DETAIL: Find_Randoms: Scanning for random events...
[0:01:40]: ***** Found Random: Freaky Forester *****
[0:01:43]: FF_WalkToCenter: Walking to the center area
[0:01:48]: FF_WalkToCenter: Walking to the center area
[0:01:54]: FF_WalkToCenter: Walking to the center area
[0:01:58]: FF_WalkToCenter: Walking to the center area
[0:02:03]: FF_WalkToCenter: Walking to the center area
[0:02:06]: FF_WalkToCenter: Walking to the center area
[0:02:13]: FF_WalkToCenter: Walking to the center area
[0:02:16]: FF_WalkToCenter: Walking to the center area
[0:02:20]: FF_WalkToCenter: Walking to the center area
[0:02:24]: FF_WalkToCenter: Walking to the center area
[0:02:28]: FF_WalkToCenter: Walking to the center area
[0:02:31]: FF_WalkToCenter: Walking to the center area
[0:02:35]: FF_WalkToCenter: Walking to the center area
[0:02:41]: FF_WalkToCenter: Walking to the center area
[0:02:44]: FF_WalkToCenter: Walking to the center area
[0:02:50]: FF_WalkToCenter: Walking to the center area

That only tells me it isn't finding the forester, unless your player wasn't even in the random. If that's the case, it would be nice if you said that.

es revolt

2012-03-08 00:03:37

From: Coh3n
Yes, that's what I meant when I said use separate Simbas.

Because there is more than just the .simba file. There's all the bitmaps used for the form, and a sound file.

That only tells me it isn't finding the forester, unless your player wasn't even in the random. If that's the case, it would be nice if you said that.

Yes my player was never in the random that error starts when i start the script in the bank or by the trees. Im not in the random

Coh3n

2012-03-08 00:11:12

Alright, I'm committing a new TabExists shortly, so hopefully that will fix things.

es revolt

2012-03-08 00:14:59

From: Coh3n
Alright, I'm committing a new TabExists shortly, so hopefully that will fix things.

think it will be done today i cannot live without botting :) and thanks for addressing it

Coh3n

2012-03-08 00:19:03

Within an hour or two.

es revolt

2012-03-08 00:20:38

From: Coh3n
Within an hour or two.

ok cool i guess im staying up

Coh3n

2012-03-08 00:21:43

Updated SRL just now. Just wait for the auto updater to kick in within the hour.

es revolt

2012-03-08 01:08:57

From: Coh3n
Updated SRL just now. Just wait for the auto updater to kick in within the hour.

when will i be able to tell if i can update srl?

Coh3n

2012-03-08 01:34:36

It automatically updates. If you have it turned off you can go to SRL > Check for Update.

es revolt

2012-03-08 08:43:00

[0:00:20]: SUCCESS: Walk_ToLoc: Walked to location: Oaks
[0:00:21]: DETAIL: Chop_Trees: Boxes Found: 0
[0:00:21]: ERROR: Chop_Trees: Failed to find tree
[0:00:21]: DETAIL: Find_Randoms: Scanning for random events...
[0:00:32]: ***** Found Random: Freaky Forester *****
[0:00:35]: FF_WalkToCenter: Walking to the center area
[0:00:39]: FF_WalkToCenter: Walking to the center area
[0:00:44]: FF_WalkToCenter: Walking to the center area
[0:00:47]: FF_WalkToCenter: Walking to the center area
[0:00:50]: FF_WalkToCenter: Walking to the center area
[0:00:56]: FF_WalkToCenter: Walking to the center area
[0:01:00]: FF_WalkToCenter: Walking to the center area
[0:01:05]: FF_WalkToCenter: Walking to the center area
[0:01:08]: FF_WalkToCenter: Walking to the center area
[0:01:12]: FF_WalkToCenter: Walking to the center area
[0:01:15]: FF_WalkToCenter: Walking to the center area
[0:01:18]: FF_WalkToCenter: Walking to the center area
[0:01:24]: FF_WalkToCenter: Walking to the center area
[0:01:27]: FF_WalkToCenter: Walking to the center area

Still getting error and i updated srl.

Also getting something in the cmd saying :

The automatically split characters are too wide. Try decreasing minspacing.
What should i do?

khaleelts

2012-03-08 09:29:18

Coh3n

2012-03-08 16:34:40

From: es revolt

[0:00:20]: SUCCESS: Walk_ToLoc: Walked to location: Oaks
[0:00:21]: DETAIL: Chop_Trees: Boxes Found: 0
[0:00:21]: ERROR: Chop_Trees: Failed to find tree
[0:00:21]: DETAIL: Find_Randoms: Scanning for random events...
[0:00:32]: ***** Found Random: Freaky Forester *****
[0:00:35]: FF_WalkToCenter: Walking to the center area
[0:00:39]: FF_WalkToCenter: Walking to the center area
[0:00:44]: FF_WalkToCenter: Walking to the center area
[0:00:47]: FF_WalkToCenter: Walking to the center area
[0:00:50]: FF_WalkToCenter: Walking to the center area
[0:00:56]: FF_WalkToCenter: Walking to the center area
[0:01:00]: FF_WalkToCenter: Walking to the center area
[0:01:05]: FF_WalkToCenter: Walking to the center area
[0:01:08]: FF_WalkToCenter: Walking to the center area
[0:01:12]: FF_WalkToCenter: Walking to the center area
[0:01:15]: FF_WalkToCenter: Walking to the center area
[0:01:18]: FF_WalkToCenter: Walking to the center area
[0:01:24]: FF_WalkToCenter: Walking to the center area
[0:01:27]: FF_WalkToCenter: Walking to the center area

Still getting error and i updated srl.

Also getting something in the cmd saying :

The automatically split characters are too wide. Try decreasing minspacing.
What should i do?

You sure your graphics are set right? This seems to only happen for some people.

es revolt

2012-03-08 16:58:01

From: Coh3n
You sure your graphics are set right? This seems to only happen for some people.

i have my graphics set on min is there an official page for graphics?

Coh3n

2012-03-08 16:59:30

From: es revolt
i have my graphics set on min is there an official page for graphics?

There's a sticky in the How to Auto section I think. I just had an idea as to why this may happen, though. I'm using MSI and it's not happening, so I'll checkout the script right now.

E: Nope, not in the script. I'm really stumped on this one. I can't even reproduce the bug so it's hard for me to do anything.

es revolt

2012-03-08 17:01:18

From: Coh3n
There's a sticky in the How to Auto section I think. I just had an idea as to why this may happen, though. I'm using MSI and it's not happening, so I'll checkout the script right now.

Yes ive just checked all my settings are exactly right

ok well thanks for trying ill just use a msi script

Coh3n

2012-03-08 17:07:08

You chopping Willows or Oaks?

es revolt

2012-03-08 20:47:47

From: Coh3n
You chopping Willows or Oaks?

i am chopping oaks the script seems to work for willows but not oaks

Majnoon

2012-03-08 21:38:17

Is it me or is the switching from a chopped tree to another tree very very slow

Coh3n

2012-03-08 22:37:04

From: Majnoon
Is it me or is the switching from a chopped tree to another tree very very slow

It's not very fast, put it that way. :p I could speed it up, but that would make it click other trees while you're already cutting.

Majnoon

2012-03-09 00:51:16

From: Coh3n
It's not very fast, put it that way. :p I could speed it up, but that would make it click other trees while you're already cutting.

Ah okay, i thought it had something to do with me :P

also props for you're msi script works great ;)

Kerk

2012-03-10 12:31:42

I'm trying to use the script without the form so i use it with smartmanager but it just starts then stops after 2 seconds saying that the script has been successfully executed. I have entered all my information where i needed to and the script works fine with the form.

Coh3n

2012-03-10 15:11:54

From: Kerk
I'm trying to use the script without the form so i use it with smartmanager but it just starts then stops after 2 seconds saying that the script has been successfully executed. I have entered all my information where i needed to and the script works fine with the form.

Did you set the USE_FORM constant to false?

abc123asd

2012-03-10 18:22:08

when using the latest script it has trouble banking, apart from that its working perfectly.

Kerk

2012-03-10 19:17:56

@Coh3n: yes

feh55

2012-03-10 21:08:16

I got bit of a problem.. I was no way near an random event. And this is happening 9/10 times when i try to run the script. The 1/10 of the time the script finds Oak trees and start to cut it, but then the "Scanning for random events…" starts and it says it found Captain arrav and that it didn't click it. :unsure:

[00:02:51]: SUCCESS: Setup_Player: Found hatchet!
[00:03:01]: SUCCESS: Walk_ToLoc: Walked to location: Oaks
[00:03:01]: DETAIL: Chop_Trees: Boxes Found: 0
[00:03:01]: ERROR: Chop_Trees: Failed to find tree
[00:03:01]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:06]: DETAIL: Find_Randoms: Scanning for random events…
[00:03:08]: ***** Found Random: Freaky Forester *****
[00:03:11]: FF_TalkTo: Failed to click Forester
[00:03:11]: FF_WalkToCenter: Walking to the center area
[00:03:15]: FF_TalkTo: Failed to click Forester
[00:03:15]: FF_WalkToCenter: Walking to the center area
[00:03:25]: FF_TalkTo: Failed to click Forester
[00:03:25]: FF_WalkToCenter: Walking to the center area
[00:03:28]: FF_TalkTo: Failed to click Forester
[00:03:28]: FF_WalkToCenter: Walking to the center area
[00:03:32]: FF_TalkTo: Failed to click Forester
[00:03:32]: FF_WalkToCenter: Walking to the center area

It start to walk for draynor square and just repeat that message "FF_WalkToCenter: Walking to the center area", then it just walks two-three squares north of the western market stall and repeats.

I start at dranyor bank with hatchet in inventory, fixed screen, minimal graphics, detail on low, and the client signed.

Coh3n

2012-03-11 04:27:10

From: Kerk
@Coh3n: yes

Okay. Sorry, I don't know what to tell your for now as I'm not at home. But when I get home on Monday I'll check it out.

From: feh55
I got bit of a problem.. I was no way near an random event. And this is happening 9/10 times when i try to run the script. The 1/10 of the time the script finds Oak trees and start to cut it, but then the "Scanning for random events…" starts and it says it found Captain arrav and that it didn't click it. :unsure:

It start to walk for draynor square and just repeat that message "FF_WalkToCenter: Walking to the center area", then it just walks two-three squares north of the western market stall and repeats.

I start at dranyor bank with hatchet in inventory, fixed screen, minimal graphics, detail on low, and the client signed.

Can you please make sure your SRL is up to date? I made an update a few days ago and was told that problem was fixed for a few people. If you're 100% sure it's up to date, I'm completely clueless as to what else it could be.

159357

2012-03-11 06:38:57

probably just me but i am getting
Exception: Error while reading stream: File "C:\Simba\Scripts\Bitmaps\BGND.png" does not exist at line 1970

159357

2012-03-11 06:50:45

NVM, figured it out, i am stupid

feh55

2012-03-11 10:15:25

From: Coh3n
Okay. Sorry, I don't know what to tell your for now as I'm not at home. But when I get home on Monday I'll check it out.

Can you please make sure your SRL is up to date? I made an update a few days ago and was told that problem was fixed for a few people. If you're 100% sure it's up to date, I'm completely clueless as to what else it could be.

I manually updated Simba, SRL, SPS, MSI and Java. The problem is still there. :unsure:

I triggered the captain arnav solver again..

[00:01:47]: DETAIL: Find_Randoms: Scanning for random events…
[00:01:49]: ***** Found Random: Cap'n Arnav *****
[00:01:51]: CA_TalkToArnav: Talking to Cap'n Arnav
[00:01:52]: CA_TalkToArnav: Didn't click Arnav DTM

And if that was not enough the "Scanning for random events…" runs every second after the script has checked the hatchet in inventory and the character is leaving bank.

I'm really sorry to cause you trouble. :crying:

Coh3n

2012-03-12 00:45:25

From: feh55
And if that was not enough the "Scanning for random events…" runs every second after the script has checked the hatchet in inventory and the character is leaving bank.

Yeah, it's just letting you know it's looking for random events (since they can occur at any time).

From: feh55

I'm really sorry to cause you trouble. :crying:

It's no problem. At least you're reporting it. Can you reproduce it? Or does it seem to happen randomly?

Ezurk

2012-03-12 22:05:54

Same thing as Feh. Happens every time I run it.

Coh3n

2012-03-12 22:11:43

Try again when your SRL updates. I made a small mistake.

Joe

2012-03-13 15:43:02

[0:00:01]: / / ___\/\______\/ /____\\____/ /_____\/ / ____\
[0:00:01]: / / /__ / / ___ / ____ //___ / ____ \/ /___\
[0:00:01]: / / /___\ / /__/ / / / / /____/ / / / / /____ /
[0:00:02]: \/_______//______/_/ /_/_/______/_/__/_/_/____/ /
[0:00:02]: \/___________________/
[0:00:02]: Draynor Chop N' Bank ~ Revision 75!
Exception: Error while reading stream: File "C:\Documents and Settings\xxxJOExxx\My Documents\Downloads\Bitmaps\BGND.png" does not exist at line 1970

Why do I get this

Coh3n

2012-03-13 15:47:18

Because you didn't extract the .zip archive like it says to do in the first post.

2012-03-25 21:31:02

Exception in Script: Plugin(libsmart32) has not been found HELP what must i do to fix this????
i really need help… NOW, this is like my first time botting, so dont laugh if its something dumb. alll help is appreciated

Robotic12

2012-03-26 13:22:42

Hello.

This is going to sound really noobish i know :P but be easy im new to simba.

I followed your instructions, filled the form in ect and ran it but then it stays at login screen doesn't enter the login information i even entered it myself and enabled S.M.A.R.T when logged in (At Draynor Bank) and my character just sits there.

Any Help?

bbassett

2012-03-26 13:40:46

From: Robotic12
Hello.

This is going to sound really noobish i know :P but be easy im new to simba.

I followed your instructions, filled the form in ect and ran it but then it stays at login screen doesn't enter the login information i even entered it myself and enabled S.M.A.R.T when logged in (At Draynor Bank) and my character just sits there.

Any Help?

Have you checked that your graphics settings within RS are set to MIN & Fixed window?

Robotic12

2012-03-26 13:47:21

Ah that was my problem haha thankyou so much.

Robotic12

2012-03-26 15:29:02

Hello.

I am using the bot and it is working great. Although i don't know if this is a bug or not but when it chops oaks and gets to the 11th inventory slot it will chop there and drop the 11th log then chop then drop and repeats its self and does not bank. is there a fix for this or am i doing something wrong?

The script keeps saying found book of knowledge.

Coh3n

2012-03-26 18:02:13

From: Robotic12
Hello.

I am using the bot and it is working great. Although i don't know if this is a bug or not but when it chops oaks and gets to the 11th inventory slot it will chop there and drop the 11th log then chop then drop and repeats its self and does not bank. is there a fix for this or am i doing something wrong?

The script keeps saying found book of knowledge.

That sounds like a bug in SRL. Please report it in the SRL Randoms rewards thread.

lays

2012-03-29 03:15:12

this is the log that i get wheni try it out

[0:01:12]: SUCCESS: Setup_Player: Found hatchet!
[0:01:18]: SUCCESS: Walk_ToLoc: Walked to location: Oaks
[0:01:19]: DETAIL: Chop_Trees: Boxes Found: 0
[0:01:19]: DETAIL: Chop_Trees: Length tmpATPA[0]: 188
[0:01:19]: DETAIL: Chop_Trees: Length tmpATPA[1]: 41
[0:01:19]: DETAIL: Find_Randoms: Scanning for random events…
[0:01:23]: DETAIL: Chop_Trees: Length tmpATPA[2]: 294
[0:01:23]: DETAIL: Chop_Trees: Length tmpATPA[3]: 402
[0:01:23]: DETAIL: Chop_Trees: Length tmpATPA[4]: 244
[0:01:23]: DETAIL: Chop_Trees: Length tmpATPA[5]: 3
[0:01:23]: DETAIL: Find_Randoms: Scanning for random events…
[0:01:26]: ERROR: Chop_Tree: Failed to find uptext
[0:01:26]: DETAIL: Find_Randoms: Scanning for random events…
[0:01:31]: ERROR: Chop_Tree: Failed to find uptext
[0:01:31]: DETAIL: Find_Randoms: Scanning for random events…
[0:01:35]: DETAIL: Chop_Trees: Uptext found!
[0:01:38]: DETAIL: Chop_IsTreeDown: Average pixel shift: 223
[0:01:38]: DETAIL: Find_Randoms: Scanning for random events…
[0:01:41]: DETAIL: Chop_IsTreeDown: Average pixel shift: 198
[0:01:41]: DETAIL: Find_Randoms: Scanning for random events…
[0:01:45]: DETAIL: Chop_IsTreeDown: Average pixel shift: 266
[0:01:45]: DETAIL: Find_Randoms: Scanning for random events…
[0:01:48]: ***** Found Random: Rewards *****
[0:01:48]: RD_SolveBook: Found Book of Knowledge
[0:01:49]: RD_Solve: Didn't solve reward, dropping as a failsafe
[0:01:50]: ***** Solved Random: Rewards *****
[0:01:50]: DETAIL: Chop_IsTreeDown: Average pixel shift: 232
[0:01:50]: DETAIL: Find_Randoms: Scanning for random events…

Coh3n

2012-03-29 03:28:53

^ Thanks, it looks like we need new DTMs for the rewards.

E: For more information on that: http://villavu.com/forum/showthread.php?t=78594

stuartroad

2012-03-31 21:00:00

Hey buddy good script but there is a few things that i find quiet weird… the thing is constantly checking for randoms, every half a second, does this use up extra memory or whatever?
also alot of the time its already cutting a tree, decides to move to another tree, and switches inbetween every few seconds, it also examines the logs quiet frequently which i find to be very unrealistic…

i am currently running it now, it works without errors, mabye if these things were fixed the xp/hr would jump a bit.

garrett1294

2012-03-31 22:23:32

Coh3n

2012-04-01 22:54:08

From: stuartroad
Hey buddy good script but there is a few things that i find quiet weird… the thing is constantly checking for randoms, every half a second, does this use up extra memory or whatever?
also alot of the time its already cutting a tree, decides to move to another tree, and switches inbetween every few seconds, it also examines the logs quiet frequently which i find to be very unrealistic…

i am currently running it now, it works without errors, mabye if these things were fixed the xp/hr would jump a bit.

Checking for randoms doesn't effect anything. I can tell you how to get rid of it, but it will never solve random events, and I'm assuming you don't want that.

The log examining is antiban, you can disable it in the antiban procedure if you want. Switching between trees is just the less than perfect IsChopping method.

MooCowOinks

2012-04-02 02:38:02

RD_Solve: Didn't solve reward, dropping as a failsafe

This is what makes the bot drops the logs.

Coh3n

2012-04-02 02:39:54

From: MooCowOinks
RD_Solve: Didn't solve reward, dropping as a failsafe

This is what makes the bot drops the logs.

It's being looked in to. I suggest you try Simba 0.99-rc4 when it's released (hopefully soon).

mightyz

2012-04-02 12:52:47

fixed earlier problem

when i get into game it just runs outside to 1 oak tree doesn't hit it goes for the normal tree then drops the logs so thats nice.

Joxmb

2012-04-08 05:14:49

I get this error:

Exception: Error while reading stream: File "C:\Users\Dom\Desktop\Smartmanager\TmpScripts\Bitmaps\BGND.png" does not exist at line 1990

I'm using smart manager, is there no way to use this with smart manager? Don't say anything about extracting please lol.

edit: It cuts about 50 oak logs an hour and drops them. Very slow, usually just waits and once in a while it decides to click on an oak tree. It also cuts normal trees for some reason. One time I had over 20 normal logs in my inventory :// 3 hours to go 15-20 wood cut…

a bit from debug box:
[1:07:39]: DETAIL: Chop_Trees: Length tmpATPA[4]: 5
[1:07:39]: DETAIL: Find_Randoms: Scanning for random events…
[1:07:40]: DETAIL: Chop_Trees: Length tmpATPA[5]: 2
[1:07:40]: DETAIL: Find_Randoms: Scanning for random events…
[1:07:42]: DETAIL: Chop_Trees: Length tmpATPA[6]: 49
[1:07:42]: DETAIL: Find_Randoms: Scanning for random events…
[1:07:43]: DETAIL: Chop_Trees: Length tmpATPA[7]: 68
[1:07:43]: DETAIL: Chop_Trees: Length tmpATPA[8]: 343
[1:07:44]: ERROR: Chop_Tree: Failed to find uptext
[1:07:44]: DETAIL: Find_Randoms: Scanning for random events…
[1:07:46]: ERROR: Chop_Tree: Failed to find uptext
[1:07:46]: DETAIL: Find_Randoms: Scanning for random events…
[1:07:49]: ERROR: Chop_Tree: Failed to find uptext
[1:07:49]: DETAIL: Find_Randoms: Scanning for random events…
[1:07:51]: DETAIL: Find_Randoms: Scanning for random events…
[1:07:52]: DETAIL: Chop_Trees: Boxes Found: 3
[1:07:52]: DETAIL: Chop_Trees: Length tmpATPA[0]: 1018
[1:07:52]: DETAIL: Chop_Trees: Length tmpATPA[1]: 25
[1:07:52]: DETAIL: Find_Randoms: Scanning for random events…
[1:07:54]: DETAIL: Chop_Trees: Length tmpATPA[2]: 6
[1:07:54]: DETAIL: Find_Randoms: Scanning for random events…
[1:07:55]: DETAIL: Chop_Trees: Length tmpATPA[3]: 1
[1:07:55]: DETAIL: Find_Randoms: Scanning for random events…
[1:07:57]: DETAIL: Chop_Trees: Length tmpATPA[4]: 46
[1:07:57]: DETAIL: Find_Randoms: Scanning for random events…
[1:07:58]: DETAIL: Chop_Trees: Length tmpATPA[5]: 72
[1:07:58]: DETAIL: Chop_Trees: Length tmpATPA[6]: 349
[1:07:59]: ERROR: Chop_Tree: Failed to find uptext[1:08:01]: DETAIL: Chop_Trees: Uptext found!
[1:08:04]: DETAIL: Chop_IsTreeDown: Average pixel shift: 120
[1:08:04]: DETAIL: Find_Randoms: Scanning for random events…
[1:08:05]: DETAIL: Chop_IsTreeDown: Average pixel shift: 0
[1:08:05]: DETAIL: Chop_IsTreeDown: Player not animating
[1:08:05]: DETAIL: Find_Randoms: Scanning for random events…
[1:08:07]: DETAIL: Chop_Trees: Boxes Found: 3
[1:08:07]: DETAIL: Chop_Trees: Length tmpATPA[0]: 393
[1:08:08]: DETAIL: Chop_Trees: Length tmpATPA[1]: 71
[1:08:08]: DETAIL: Chop_Trees: Length tmpATPA[2]: 2
[1:08:08]: DETAIL: Find_Randoms: Scanning for random events…
[1:08:09]: DETAIL: Chop_Trees: Length tmpATPA[3]: 2
[1:08:10]: DETAIL: Find_Randoms: Scanning for random events…
[1:08:11]: DETAIL: Chop_Trees: Length tmpATPA[4]: 3
[1:08:11]: DETAIL: Find_Randoms: Scanning for random events…
[1:08:13]: ERROR: Chop_Tree: Failed to find uptext
[1:08:13]: DETAIL: Find_Randoms: Scanning for random events…
[1:08:16]: DETAIL: Chop_Trees: Uptext found!
[1:08:16]: DETAIL: Find_Randoms: Scanning for random events…
[1:08:18]: DETAIL: Chop_Trees: Boxes Found: 2
[1:08:18]: DETAIL: Chop_Trees: Length tmpATPA[0]: 443
[1:08:18]: DETAIL: Chop_Trees: Length tmpATPA[1]: 2
[1:08:18]: DETAIL: Find_Randoms: Scanning for random events…
[1:08:20]: DETAIL: Chop_Trees: Length tmpATPA[2]: 621
[1:08:20]: DETAIL: Chop_Trees: Length tmpATPA[3]: 5
[1:08:20]: DETAIL: Find_Randoms: Scanning for random events…
[1:08:21]: DETAIL: Chop_Trees: Length tmpATPA[4]: 1
[1:08:21]: DETAIL: Find_Randoms: Scanning for random events…
[1:08:23]: DETAIL: Chop_Trees: Length tmpATPA[5]: 1
[1:08:23]: DETAIL: Find_Randoms: Scanning for random events…

had no random events if that matters.

Mor

2012-04-08 14:07:44

Firstly,Thank you for this script.
Secondly,The script works well, But little bit slow.
I mean, Sometimes it detects the trees slowly.

xblazenx

2012-04-09 23:26:05

Mor

2012-04-12 11:30:25

Hi, there is a bug with banking
It takes few minutes to bank the logs, or sometimes it even doesn't succeed
to bank them.
I think it something wrong with the camera angel..

[00:14:48]: ERROR: Bank_Logs: Failed to find bank screen
[00:14:53]: DETAIL: Find_Randoms: Scanning for random events...
[00:14:53]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:14:53]: ERROR: Bank_Logs: Failed to find bank screen
[00:14:58]: DETAIL: Find_Randoms: Scanning for random events...
[00:14:58]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:14:58]: ERROR: Bank_Logs: Failed to find bank screen
[00:15:02]: DETAIL: Find_Randoms: Scanning for random events...
[00:15:03]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:15:17]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:15:17]: ERROR: Bank_Logs: Failed to find bank screen
[00:15:22]: DETAIL: Find_Randoms: Scanning for random events...
[00:15:22]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:15:22]: ERROR: Bank_Logs: Failed to find bank screen

Joe

2012-04-12 11:46:22

You do realize you have 81 pages of comments?
I haven't used this script in a while but it worked really well!
Mental rep+ because you have it disabled

Tundermacko

2012-04-15 13:05:20

I have two minor problems. First one is that my account log out after it banked the logs, and the second one is that i dont know what should i put into the Logs box at the player settings.

demon 7382

2012-04-16 04:42:48

From: Tundermacko
I have two minor problems. First one is that my account log out after it banked the logs, and the second one is that i dont know what should i put into the Logs box at the player settings.

im having the same problem what am i suposed to fill in at the player setup it says it need more information buth i filled in all i couls exept nickname buth i can only type in like 5 letters what am i suposed to do and now it says it misses MSVCR71.dll

kinghoho

2012-04-18 21:10:50

im getting this error

Error while reading stream: File "C:\DOCUME~1\Dan\LOCALS~1\Temp\Rar$DI00.437\Bitmaps\BGND.png" does not exist at line 1970

Chubbychekka

2012-04-18 23:13:29

The black box with the white text rapidly says "The automatically split characters are too wide. Try decreasing minspacing" This happens every time and it stops chopping logs and hovers over my inventory.. not sure whats going on

Kyle Undefined

2012-04-19 10:00:18

From: kinghoho
im getting this error

Error while reading stream: File "C:\DOCUME~1\Dan\LOCALS~1\Temp\Rar$DI00.437\Bitmaps\BGND.png" does not exist at line 1970

You didn't extract the files.

girl logic

2012-04-30 22:07:18

|====================================|
|              ~ SRL ~               |
|           Randoms Report           |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|                                    |
|    Mime Solved            ~ 1      |
|    Rewards Solved         ~ 3      |
|                                    |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|====================================|
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 75 -                   |
|====================================================|
|        3 Hours, 39 Minutes and 57 Seconds          |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 36                                |
|      Logs Cut:   1,008                             |
|      Logs P/H:   274                               |
|      Levels Up:  64                                |
|      Experience: 68,040                            |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

la102

2012-05-01 17:16:37

From: Chubbychekka
The black box with the white text rapidly says "The automatically split characters are too wide. Try decreasing minspacing" This happens every time and it stops chopping logs and hovers over my inventory.. not sure whats going on

same here, graphics are set properly and files all extracted.

OphielasRage

2012-05-05 13:40:38

I also get this message and i dont understand why it says "The automatically split characters are too wide. Try decreasing minspacing"

Crude

2012-05-06 08:38:02

It doesn't seem to be banking, just opens bank.. right clicks on every log and does nothing.

Help?

runes

2012-05-10 05:26:05

mine keeps dropping logs while trying to chop oaks?

hansalfonso

2012-05-13 03:12:53

how do i fix this ???????.

Error while reading stream: File "C:\Users\Hans\AppData\Local\Temp\Rar$DIa0.072\Bitmaps\BGND.png" does not exist at line 1970

kevin33

2012-05-13 14:56:11

From: hansalfonso
how do i fix this ???????.

Error while reading stream: File "C:\Users\Hans\AppData\Local\Temp\Rar$DIa0.072\Bitmaps\BGND.png" does not exist at line 1970

Dude read the first post. You must extract the file using winzip or winrar. After this open up the folder you extracted and start the client.

MotorMouse

2012-05-14 09:40:58

[Error] C:\Simba\Includes\SRL/SRL/core/simba.simba(340:14): Unknown identifier '' at line 339
Compiling failed.
Outdated?

Word

2012-05-14 13:11:07

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 75 -                   |
|====================================================|
|        5 Hours, 10 Minutes and 37 Seconds          |
|&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;&#9472;|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 70                                |
|      Logs Cut:   1,960                             |
|      Logs P/H:   378                               |
|      Levels Up:  82                                |
|      Experience: 132,300                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

Word

2012-05-14 13:22:17

From: MotorMouse
[Error] C:\Simba\Includes\SRL/SRL/core/simba.simba(340:14): Unknown identifier '' at line 339
Compiling failed.
Outdated?

Did you extract the whole folder ("DCnB - Copy") - you need to as it has required files in there.

Also, it's still working for me now, so if the above didn't help, try checking for updates (as in, if you haven't got the outdated simba).

_beau

2012-05-14 23:44:12

your bot is a little slow. and it always stops and clicks on the tree that is just been cut. not saying anything is wrong with it you just miss a lot of trees its probs just me cause i have been lagging internet wise. but yeah just letting you know thats whats happening.

mikero420

2012-05-15 02:26:44

how do i download the simba

kazzos

2012-05-15 07:30:29

for some reason it cuts oak logs then drops 1 and the process continues.

mateovgg

2012-05-18 15:52:29

dragonwith

2012-05-19 07:46:01

When i start the script it says : ThreadSafeCall('Form_InitForm', varArr);
end;

Ensoleille

2012-05-20 11:41:52

From: kazzos
for some reason it cuts oak logs then drops 1 and the process continues.

Same problem here, as well as the Spamming of The automatically split characters are too wide. Try decreasing minspacing in the CMD.
Pretty sure i've set everything correctly.

mrrocky

2012-05-23 09:38:55

Exception: Error while reading stream: File "C:\Users\Rok\AppData\Local\Temp\Temp1_Draynor Chop N' Bank (Rev. 75).zip\DCnB - Copy\Bitmaps\INTRO.png" does not exist at line 1970
The following bitmaps were not freed: [0]

this is my problem :( what do i do

sickle

2012-05-28 23:10:19

draynor oak works flawlessly. a quick question. can you make it do BOTH willow and oaks?

darkgun33

2012-05-29 04:47:23

sickle what was your set up? I couldn't get Oak to work… the msg keeps on saying about decreaseing character space minimum or something?

sickle

2012-05-29 07:42:41

From: Coh3n
That sounds like a bug in SRL. Please report it in the SRL Randoms rewards thread.

This problem persists. I try to update SRL and it says:

You have a new update available for Plugins!
Plugins Updater: Local Version - "1" | Remote Version = "21"
Plugins Updater: Update File - "http://wizzup.org/static/srl/simba_plugins.tar.bz2"
Plugins Updater: Downloading…
Plugins Updater: Decompressing…
Plugins Updater: Extracting…
Plugins Update ERROR: Kill recieved from Updater.
No SRL update available

WeeJazzah

2012-06-06 07:57:04

This is a great script, however, whenever a random event occurs the sound doesn't go off even when i have it selected to true in the player form. Also, in the debug box it searches for a random event but only ever seems to find the 'Mime' event even if that is not the event that my character is in therefore it fails to completed the event and logs out. Any help please?

Marmariscool

2012-06-10 10:43:03

The only issue I am having currently is that it takes AT LEAST 10 seconds for him to start cutting another Willow after he finishes one. Is it supposed to be that slow? o.O

Sheriff37

2012-06-20 12:20:26

When i was watching the program i noticed my character started fishing.:surprised:

Armchair Sniper

2012-06-20 12:38:41

I started the script and after a while my character went to the water and fished for about 20 seconds then went back to cutting, may i say wtf?

d_blan

anyone alive?

Solar

2012-09-05 04:07:06

From: gogol13
anyone alive?

Seriously, stop spamming this thread.
I was going to reply to your PM and even post an edited version of the script that I got to compile, but then I saw how much of leech you really are. The walkthrough which you was given the link for is the only thing you need to get this script to compile, and I expect working.
Stop being so lazy and read for just a minute.

gogol13

2012-09-05 05:34:14

hahaha
I'm running the script from the bank does not need your script because who instead preferred to improve the spam topic and do not spam it already up to 90 pages of this topic :)

Thanks for being a dick was formerly known as the user

gogol13

2012-09-05 08:04:08

i have working version DCnB WoodCutting
Download:
= LINK REMOVED =

Coh3n

2013-11-24 18:16:31

Well, it's been a couple years, but I finally decided to update this script. It should be working pretty well for SRL-6 and RS3. Here's my current progress report (still running):


/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 76 -                   |
|====================================================|
|        20 Minutes and 16 Seconds                   |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 7                                 |
|      Logs Cut:   189                               |
|      Logs P/H:   559                               |
|      Levels Up:  0                                 |
|      Experience: 12,758                            |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

Enjoy,
Coh3n

Flight

2013-11-24 20:28:34

Wow Coh3n releasing a script after all of this time of development? Mark this day on your calendars folks.

Nicely done, we're definitely in need of some scripts.

Coh3n

2013-11-24 22:29:35

From: Flight
Nicely done, we're definitely in need of some scripts.

That's why I updated it. I'm working on updating another as well.

Coh3n

2013-11-25 17:19:16

Just got a decent run. Stopped manually.


/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 76 -                   |
|====================================================|
|        4 Hours, 17 Minutes and 43 Seconds          |
|????????????????????????????????????????????????????|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 57                                |
|      Logs Cut:   1,536                             |
|      Logs P/H:   358                               |
|      Levels Up:  0                                 |
|      Experience: 103,680                           |
|      Breaks:     2                                 |
|____________________________________________________|
|____________________________________________________/

Essex

2013-11-27 13:54:18

could someone explain how to do this im just a noob as coding although most of its done for me i just cant get past some areas could you guys tell me step to step what to do? and exactly where to do it? Thanks.

Coh3n

2013-11-27 15:03:00

Hopefully this will help. :)

Open the script in Simba (either by double clicking the file, or going to File > Open in Simba).
Hit Ctrl + G (the go-to line function).
Type in 108. Hit Return.
Here's where you start setting up the script.
There are descriptions beside each line to setup. If you don't know what one means, ask me or leave them as is.
For the "procedure DeclarePlayers" part, I added a section in this guide that should help.

If you are still confused, just ask (and try to be specific). :)

Coh3n

Essex

2013-11-28 12:37:31

Exception in Script: File "SRL-6/SRL.simba" not found at line 50, column 5

This is all i get man :( i did everything and it still messes up.When it says Stats ID does it mean my log in name?
and declare players also is a bit weird i done it though it seemed clear enough but whats with the error?

Thanks

kevin33

2013-11-28 13:50:56

From: Essex
Exception in Script: File "SRL-6/SRL.simba" not found at line 50, column 5

This is all i get man :( i did everything and it still messes up.When it says Stats ID does it mean my log in name?
and declare players also is a bit weird i done it though it seemed clear enough but whats with the error?

Thanks

To fix the error I just re-installed Simba, updated everything, got the latest java version and it was all good. The link below will help you fix errors and explains how to go about doing that. The error just means you dont have SRL 6 which is what you need to run the script.
http://villavu.com/forum/showthread.php?t=47714
Stats ID is your SRL stats account which you can go and create if you feel the need. Otherwise just put in ID: Anonymous Pass: anon1337 (I believe this is the anonymous details, but I could be wrong. Its been a long time since I have had to remember that stuff). Declare players information can be found from the link as well.

Coh3n

2013-11-28 14:12:04

From: kevin33
To fix the error I just re-installed Simba, updated everything, got the latest java version and it was all good. The link below will help you fix errors and explains how to go about doing that. The error just means you dont have SRL 6 which is what you need to run the script.
http://villavu.com/forum/showthread.php?t=47714
Stats ID is your SRL stats account which you can go and create if you feel the need. Otherwise just put in ID: Anonymous Pass: anon1337 (I believe this is the anonymous details, but I could be wrong. Its been a long time since I have had to remember that stuff). Declare players information can be found from the link as well.

You could also just leave the stats ID and pass blank. Stats don't even work right now anyway.

Cashbaq

2013-11-29 02:28:45

I am having a really hard time trying to set up my interface correctly for this script. I followed the 'How To' for RS3 (Slim title bars, retro interface scheme, etc). The script gets stuck at the debug point "Opening tab via gametab navigation bar". Also have the fishing symbol. See below for my current interface set up.
[ATTACH=CONFIG]22435[/ATTACH]

kevin33

2013-11-29 02:37:37

From: Cashbaq
I am having a really hard time trying to set up my interface correctly for this script. I followed the 'How To' for RS3 (Slim title bars, retro interface scheme, etc). The script gets stuck at the debug point "Opening tab via gametab navigation bar". Also have the fishing symbol. See below for my current interface set up.
[ATTACH=CONFIG]22435[/ATTACH]

Make sure you are in Old School Mode and your transparency is all the way down as well. You are not currently in old school so give that a try. Make sure you are in OpenGL mode and that you are on fixed screen.

Cashbaq

2013-11-29 02:56:48

Many thanks Kevin!

Cashbaq

2013-11-29 03:10:42

I have a problem with the bank interface now. How do I fix is this now?
[ATTACH=CONFIG]22436[/ATTACH]

Cashbaq

2013-11-29 05:22:03

Coh3n

2013-11-29 12:36:02

From: Cashbaq
[PHP]/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 76 - |
|====================================================|
| 2 Hours, 23 Minutes and 45 Seconds |
|????????????????????????????????????????????????????|
| Player: 0 |
| Location: Willows |
| Active: True |
| Tree Type: Willow |
| Loads Done: 27 |
| Logs Cut: 756 |
| Logs P/H: 316 |
| Levels Up: 0 |
| Experience: 51,030 |
| Breaks: 0 |
|____________________________________________________|
|____________________________________________________/[/PHP]

Got this with when I had to intervene to close the bank interface as it overlaps the minimap which is the next process of the script to take me back to the trees.

Not a bad report. :)

I think I know what caused your problem. I'm going to upload a new version soon. :) Thanks for the feedback. E: I uploaded Rev. 77. Let me know if it still happens.

Rtap

2013-11-29 16:16:28

I'm not sure what I'm doing wrong but this is all the bot does: [0:00:11]: – Succesfully freed SMART[8988]
[0:00:11]: Successfully executed.

Cashbaq

2013-11-29 18:28:16

From: Rtap
I'm not sure what I'm doing wrong but this is all the bot does: [0:00:11]: – Succesfully freed SMART[8988]
[0:00:11]: Successfully executed.

Did you configure the script correctly under:
[PHP]{==============================================================================\
| Script Setup |
|==============================================================================|
| |
| * To setup the script and your players. |
\_____________________________________________________________________________}[/PHP]

?

Coh3n

2013-11-29 23:53:52

From: Rtap
I'm not sure what I'm doing wrong but this is all the bot does: [0:00:11]: – Succesfully freed SMART[8988]
[0:00:11]: Successfully executed.

What does it say before that?

Make sure you enter in the player file name correctly in the player setup. Also make sure your graphics settings are set properly (fixed size, openGL, min graphics, transparency 0).

Cashbaq

2013-11-30 02:32:08

From: Coh3n
Not a bad report. :)

I think I know what caused your problem. I'm going to upload a new version soon. :) Thanks for the feedback. E: I uploaded Rev. 77. Let me know if it still happens.

Awesome work Cohen, really appreciate the effort and the attitude for good working code :) Closes the bank interface very swiftly after deposit, perhaps a 'bit' too bot like. Definitely not problem, just an observation :)

Coh3n

2013-11-30 02:33:40

From: Cashbaq
Awesome work Cohen, really appreciate the effort and the attitude for good working code :) Closes the bank interface very swiftly after deposit, perhaps a 'bit' too bot like. Definitely not problem, just an observation :)

Glad it's working. :) What's bot-like about it? It just presses the ESC key rather than clicking the X. I figured a human would be more likely to do that. Maybe not?

Rtap

2013-11-30 04:47:49

From: Coh3n
What does it say before that?

Make sure you enter in the player file name correctly in the player setup. Also make sure your graphics settings are set properly (fixed size, openGL, min graphics, transparency 0).

I didn't declare the player I want to use correctly, but for some reason I had to reinstall simba for the Invalid player name warning to come up.
Everything's working (almost) like a charm now, thanks Coh3n!

Cashbaq

2013-11-30 07:54:17

From: Coh3n
Glad it's working. :) What's bot-like about it? It just presses the ESC key rather than clicking the X. I figured a human would be more likely to do that. Maybe not?

That's fine, just had the thought that different people close their bank interfaces differently and what I consider botty from a non-scripter POV is not necessarily true. Some just run away to their next destination, others use the 'X' and then there is the use of "Esc".

Another observation: Sometimes I will stuck at the 4th tree south of the bank. The camera won't rotate to find new trees when that tree is 'regrowing', it only detects that 4th tree for sometimes that whole load.

Cashbaq

2013-11-30 09:42:52

Coh3n

2013-11-30 12:55:37

From: Rtap
I didn't declare the player I want to use correctly, but for some reason I had to reinstall simba for the Invalid player name warning to come up.
Everything's working (almost) like a charm now, thanks Coh3n!

Glad to hear it. :)

From: Cashbaq
That's fine, just had the thought that different people close their bank interfaces differently and what I consider botty from a non-scripter POV is not necessarily true. Some just run away to their next destination, others use the 'X' and then there is the use of "Esc".

The script used to just click the minimap without closing the bank, but seeing as the minimap is covered by the bank interface, I had to close the first.

From: Cashbaq

Another observation: Sometimes I will stuck at the 4th tree south of the bank. The camera won't rotate to find new trees when that tree is 'regrowing', it only detects that 4th tree for sometimes that whole load.

The tree detection isn't the best, I know. At times it won't find all the trees. I've been meaning to try to improve it, I've just been busy.

The thing is it's hard to get it exactly right because a lot of the tree bark color is "unclickable" if you know what I mean. So I could either keep it the way it is (not finding all trees) or have it sporadically move the mouse to different locations (more than it already does) until the right mouse-over text is found.

Cashbaq

2013-11-30 20:33:52

From: Coh3n

The script used to just click the minimap without closing the bank, but seeing as the minimap is covered by the bank interface, I had to close the first.

I am happy with the closing. Saying it was botty was not really fair of me

From: Coh3n
The tree detection isn't the best, I know. At times it won't find all the trees. I've been meaning to try to improve it, I've just been busy.

The thing is it's hard to get it exactly right because a lot of the tree bark color is "unclickable" if you know what I mean. So I could either keep it the way it is (not finding all trees) or have it sporadically move the mouse to different locations (more than it already does) until the right mouse-over text is found.

I think the former is better than the latter, now that I have a better understanding :)

Cashbaq

2013-12-01 00:44:01

Coh3n

2013-12-01 00:57:19

Glad it's working well. :)

I'm sure there's a better way to detect the trees, but the current method works, and I don't have a lot of time to look into it right now. :)

IROC-Z

2013-12-01 01:55:24

I press play and the black window pops up that is supposed to before smart, but it goes away right away and smart doesn't come up. I am not sure what I did wrong.

Coh3n

2013-12-01 03:04:59

From: fortier4
I press play and the black window pops up that is supposed to before smart, but it goes away right away and smart doesn't come up. I am not sure what I did wrong.

Can you post what the debug in Simba says?

IROC-Z

2013-12-01 10:38:30

/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 77 - |
|====================================================|
| 16 Seconds |
|—————————————————-|
|____________________________________________________|
|____________________________________________________/
/=======================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 77 - |
|=======================================================================================|
| Ran for: 16 Seconds |
|?????? ???????? ???????????? ??????? ???????? ?????????? ???????? ???????????? ????????|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|?????? ???????? ???????????? ??????? ???????? ?????????? ???????? ???????????? ????????|
|???????????????????????????????????????????????????????????????????????????????????????|
| Totals: | 0 | | 0 | 0 | 0 | 0 |
|_______________________________________________________________________________________|
|_______________________________________________________________________________________/
[0:00:17]: Successfully executed.

It compiles and starts to go, but SMART just doesn't open up. I tried re-installing SMART and that didn't work.

Coh3n

2013-12-01 11:26:22

Can you post the debug from the logs? They're in Simba/Includes/SRL-6/logs/.

IROC-Z

2013-12-01 13:07:45

[00:00:03]: – setupSRL()
[00:00:03]: —- Setting up SRL…
[00:00:03]: —- initSmart():
[00:00:03]: —— Attempting to pair to a previously spawned client
[00:00:03]: —— smartPairToExistingClient():
[00:00:03]: ——– Found no free clients to pair to
[00:00:03]: —— smartPairToExistingClient(): result = false
[00:00:03]: —— Attempting to spawn a new client..
[00:00:03]: —— smartCreateClient():
[00:00:03]: ———- smartGetParameters(): Succesfully grabbed paramters
[00:00:03]: ——– getJavaPath():
[00:00:03]: ———- Attempting to search for your Java path
[00:00:03]: ———- Found your java path @ C:\Program Files (x86)\Java\jre6\bin\java.exe
[00:00:03]: ——– getJavaPath()
[00:00:03]: ——– Using parameters [http://world39.runescape.com/, f5208702341038633924]
[00:00:03]: ——– Using plugins "OpenGL32.dll"
[00:00:25]: ——– FATAL ERROR: Failed to spawn a SMART client
[00:00:25]: ——– Freeing the minimap mask

Coh3n

2013-12-01 14:25:29

From: fortier4
[00:00:03]: – setupSRL()
[00:00:03]: —- Setting up SRL…
[00:00:03]: —- initSmart():
[00:00:03]: —— Attempting to pair to a previously spawned client
[00:00:03]: —— smartPairToExistingClient():
[00:00:03]: ——– Found no free clients to pair to
[00:00:03]: —— smartPairToExistingClient(): result = false
[00:00:03]: —— Attempting to spawn a new client..
[00:00:03]: —— smartCreateClient():
[00:00:03]: ———- smartGetParameters(): Succesfully grabbed paramters
[00:00:03]: ——– getJavaPath():
[00:00:03]: ———- Attempting to search for your Java path
[00:00:03]: ———- Found your java path @ C:\Program Files (x86)\Java\jre6\bin\java.exe
[00:00:03]: ——– getJavaPath()
[00:00:03]: ——– Using parameters [http://world39.runescape.com/, f5208702341038633924]
[00:00:03]: ——– Using plugins "OpenGL32.dll"
[00:00:25]: ——– FATAL ERROR: Failed to spawn a SMART client
[00:00:25]: ——– Freeing the minimap mask

The solution is in this thread. :)

IROC-Z

2013-12-01 15:37:38

Thank you very much. I will post a proggy once i get one.

liam033500

2013-12-02 07:13:33

Gin

2013-12-02 15:23:22

So i been running this script for a week or so and noticed some things. First, sometimes, when the tree is down, the script just randomly starts clicking the water area trying to walk there. Of course it cant so my character just stands there and clicks. I dunno why it does this. It does this repeatedly until the tree comes back up instead of trying to find another tree. Is this some kind of scripting problem? Or something wrong on my end. This seems like something really easy for jagex to notice.

Coh3n

2013-12-02 20:07:53

From: Gin
So i been running this script for a week or so and noticed some things. First, sometimes, when the tree is down, the script just randomly starts clicking the water area trying to walk there. Of course it cant so my character just stands there and clicks. I dunno why it does this. It does this repeatedly until the tree comes back up instead of trying to find another tree. Is this some kind of scripting problem? Or something wrong on my end. This seems like something really easy for jagex to notice.

No offense to you, but I think it's insane when people say "it's easy for Jagex to notice" as if they're watching the screen of every single account. I see people saying it ALL the time, and it bothers me. :p I don't think your account is going to be flagged/banned for clicking the water a few times.

As for the issue, it would help me out if you posted some debug from when it happens. I suspect it can't find a tree and is trying to relocate. Not sure why it would click the water though (that's why I need the debug).

Gin

2013-12-03 17:33:11

From: Coh3n
No offense to you, but I think it's insane when people say "it's easy for Jagex to notice" as if they're watching the screen of every single account. I see people saying it ALL the time, and it bothers me. :p I don't think your account is going to be flagged/banned for clicking the water a few times.

As for the issue, it would help me out if you posted some debug from when it happens. I suspect it can't find a tree and is trying to relocate. Not sure why it would click the water though (that's why I need the debug).

Fair enough, I'll try to get the debug if it happens again.

Tlachtli

2013-12-04 09:21:42

As usual, your script runs amazingly. I went through and manually increased a couple of wait times in the banking process, just to make up for my sluggish load times. Here's an overnight proggy:

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        8 Hours, 3 Minutes and 18 Seconds           |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 168                               |
|      Logs Cut:   4,698                             |
|      Logs P/H:   583                               |
|      Levels Up:  0                                 |
|      Experience: 317,115                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

It seems like the "Levels Up" tracker may not be working as intended, I definitely leveled a few times but it still recorded 0. Just a small issue, doesn't impact the script's ability to run well.

Coh3n

2013-12-04 11:46:46

From: Tlachtli
As usual, your script runs amazingly. I went through and manually increased a couple of wait times in the banking process, just to make up for my sluggish load times. Here's an overnight proggy:

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        8 Hours, 3 Minutes and 18 Seconds           |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 168                               |
|      Logs Cut:   4,698                             |
|      Logs P/H:   583                               |
|      Levels Up:  0                                 |
|      Experience: 317,115                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

It seems like the "Levels Up" tracker may not be working as intended, I definitely leveled a few times but it still recorded 0. Just a small issue, doesn't impact the script's ability to run well.

Nice report, I'll add it to the first post. :)

Yeah, the level up counter won't work. It was removed in the conversion to SRL-6 because SRL-6 doesn't (or didn't at the time) have a function to get the player's skill level. I must have forgotten to remove from the progress report. I'll be sure to fix that for the next version.

Gin

2013-12-04 17:19:56

[0:56:07]: Exception in Script: Runtime error: "The bitmap[37077185] does not exist" at line 486, column 34 in file "C:\Simba\Includes\SRL-6\lib\utilities\wrappers.simba"
The following bitmaps were not freed: [Minimap Mask, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]
File[C:\Simba\Includes\SRL-6/logs/SRL log (04-12-13 at 03.18.37 PM).txt] has not been freed in the script, freeing it now.

My script seems to only run for about a hour then it stops and i get this.

Coh3n

2013-12-04 19:01:47

From: Gin
[0:56:07]: Exception in Script: Runtime error: "The bitmap[37077185] does not exist" at line 486, column 34 in file "C:\Simba\Includes\SRL-6\lib\utilities\wrappers.simba"
The following bitmaps were not freed: [Minimap Mask, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]
File[C:\Simba\Includes\SRL-6/logs/SRL log (04-12-13 at 03.18.37 PM).txt] has not been freed in the script, freeing it now.

My script seems to only run for about a hour then it stops and i get this.

Do you think you could post the debug that was printed before the error? I'm not sure if I call findBitmap in the script at all, so it might be something in SRL. Also, did you happen to see what it was doing when this happened?

Gin

2013-12-04 19:10:36

From: Coh3n
Do you think you could post the debug that was printed before the error? I'm not sure if I call findBitmap in the script at all, so it might be something in SRL. Also, did you happen to see what it was doing when this happened?

Sorry Im a noob, how do I do that exactly?

Coh3n

2013-12-04 19:19:03

From: Gin
Sorry Im a noob, how do I do that exactly?

There should be more text before the error. I'm assuming you copied and pasted the error from the debug box? Just scroll up and copy more text. Alternatively, you could go into Simba/Includes/SRL-6/logs/ and find and open the log file and copy the text from the end (assuming you have the script set to save a log file).

Rtap

2013-12-05 07:07:48

Is the player animation detection broken? It seems to me as if the script never detects that the player actually is chopping.

Coh3n

2013-12-05 16:58:37

From: Rtap
Is the player animation detection broken? It seems to me as if the script never detects that the player actually is chopping.

You might have to adjust the ANIMATION_SHIFT constant in the script setup. It's used to get the pixel shift on the player. The pixel shift is obviously much lower when the player isn't chopping, and the pixel shifting will change depending on what the player is wearing.

If the debug says the current pixel shift while chopping is below ANIMATION_SHIFT, you'll have to set ANIMATION_SHIFT to a lower number. Even then, it's not a perfect system, and if a tree is blocking the player it likely won't work properly.

bevardis

2013-12-06 04:33:29

Unfortunately, the script just opens My documents for me and executes. I cannot figure out how to set up players, too. Or is this not supposed to work on 64 bit windows7 machine? I've been out of the scene for quite some time now.

Edit: Nevermind.

Rtap

2013-12-06 12:26:22

From: Coh3n
You might have to adjust the ANIMATION_SHIFT constant in the script setup. It's used to get the pixel shift on the player. The pixel shift is obviously much lower when the player isn't chopping, and the pixel shifting will change depending on what the player is wearing.

If the debug says the current pixel shift while chopping is below ANIMATION_SHIFT, you'll have to set ANIMATION_SHIFT to a lower number. Even then, it's not a perfect system, and if a tree is blocking the player it likely won't work properly.

Ah, yes, it worked :)! Works flawlessly now! Thanks again, Coh3n!
EDIT:

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        15 Hours, 9 Minutes and 54 Seconds          |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 263                               |
|      Logs Cut:   7,096                             |
|      Logs P/H:   468                               |
|      Levels Up:  0                                 |
|      Experience: 478,980                           |
|      Breaks:     10                                |
|____________________________________________________|
|____________________________________________________/

I stopped it manually :)

Coh3n

2013-12-08 08:42:08

From: Rtap
Ah, yes, it worked :)! Works flawlessly now! Thanks again, Coh3n!
EDIT:

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        15 Hours, 9 Minutes and 54 Seconds          |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 263                               |
|      Logs Cut:   7,096                             |
|      Logs P/H:   468                               |
|      Levels Up:  0                                 |
|      Experience: 478,980                           |
|      Breaks:     10                                |
|____________________________________________________|
|____________________________________________________/

Awesome to see a 4 year old script still living on. Definitely one of the greats!

Coh3n

2013-12-12 23:14:58

From: misha89il
uffff nothing of scripts isnt work =_= ,ok i ll try agian friday do all the progress again… could we chat live once you could guide me….

I won't be online at all this weekend, and very little over the next few weeks (Christmas break). Your problem is likely a small setup issue. Just make sure you follow my guide carefully. If it still doesn't work, try visiting the IRC channel, I'm sure someone will help you.

From: Rich
Awesome to see a 4 year old script still living on. Definitely one of the greats!

Glad you think so. :)

Stragar

2013-12-21 06:31:34

Coh3n

2013-12-21 10:51:25

From: Stragar
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 77 - |
|====================================================|
| 9 Hours, 2 Minutes and 27 Seconds |
|—————————————————-|
| Player: 0 |
| Location: Willows |
| Active: True |
| Tree Type: Willow |
| Loads Done: 129 |
| Logs Cut: 3,604 |
| Logs P/H: 399 |
| Levels Up: 0 |
| Experience: 243,270 |
| Breaks: 6 |
|____________________________________________________|
|____________________________________________________/

Very nice! I'm going to add that to the first post. :)

public3n3my

2013-12-25 01:23:08

I'm not sure if it's because of the new versions of Simba/SRL or not, but I'm no longer able to run the script for longer then 6 hours after the past day or two. Previously it would close SMART and open up a new one and thus work fine with the 6 hour session limit, but now it just hits it detects an "unknown" message and quits the script.

Ashaman88

2013-12-25 08:46:22

From: public3n3my
I'm not sure if it's because of the new versions of Simba/SRL or not, but I'm no longer able to run the script for longer then 6 hours after the past day or two. Previously it would close SMART and open up a new one and thus work fine with the 6 hour session limit, but now it just hits it detects an "unknown" message and quits the script.

Was fixed with the update last night

public3n3my

2013-12-27 07:34:22

From: Ashaman88
Was fixed with the update last night

I've tried forcing updates for Simba/SRL/Plugins/SPS several times and have received updates since your post, but it still stops after ~6-7 hours (time varies due to the breaks), which is due to it not refreshing SMART.

Olly

2013-12-27 09:38:19

From: public3n3my
I've tried forcing updates for Simba/SRL/Plugins/SPS several times and have received updates since your post, but it still stops after ~6-7 hours (time varies due to the breaks), which is due to it not refreshing SMART.

Soooo what does the debug say?

Rtap

2013-12-27 13:54:09

Another nice, long proggy. Stopped it manually again.

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        14 Hours, 57 Minutes and 17 Seconds         |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 260                               |
|      Logs Cut:   7,020                             |
|      Logs P/H:   469                               |
|      Levels Up:  0                                 |
|      Experience: 473,850                           |
|      Breaks:     10                                |
|____________________________________________________|
|____________________________________________________/

public3n3my

2013-12-27 18:36:21

From: Olly
Soooo what does the debug say?

The debug would go through the login, then come up with unknown message "you need to close your tab/window and wait 5 minutes" (I can't remember the exact wording, but it was what the client says when you've had it going for 6 hours), then the script would say login failed and run its shutdown functionality.
Of cause after posting that message though I tried again overnight and its now been running for 13 hours, so hopefully it's now liking w/e it wasn't before.

public3n3my

2013-12-29 17:38:56

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        2 Days, 12 Hours, 55 Minutes and 56 Seconds |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 857                               |
|      Logs Cut:   23,993                            |
|      Logs P/H:   394                               |
|      Levels Up:  0                                 |
|      Experience: 1,619,528                         |
|      Breaks:     42                                |
|____________________________________________________|
|____________________________________________________/

Current progress report. All good with the client relaunching now.

Olly

2013-12-29 18:22:32

From: public3n3my

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        2 Days, 12 Hours, 55 Minutes and 56 Seconds |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 857                               |
|      Logs Cut:   23,993                            |
|      Logs P/H:   394                               |
|      Levels Up:  0                                 |
|      Experience: 1,619,528                         |
|      Breaks:     42                                |
|____________________________________________________|
|____________________________________________________/

Current progress report. All good with the client relaunching now.

Nice to see that srl-6 is stableish!

public3n3my

2013-12-29 18:35:55

From: Coh3n
No offense to you, but I think it's insane when people say "it's easy for Jagex to notice" as if they're watching the screen of every single account. I see people saying it ALL the time, and it bothers me. :p I don't think your account is going to be flagged/banned for clicking the water a few times.

As for the issue, it would help me out if you posted some debug from when it happens. I suspect it can't find a tree and is trying to relocate. Not sure why it would click the water though (that's why I need the debug).

It's something I've also noticed happening, the log displays this over and over even though it's standing right next to a tree. I have noticed that it happens when the camera has been spun around so that it's facing directly south and looking straight down, I've find that if I manually click on the compass to spin the camera around then the script will pick up and go back to work.

[13:51:37]: —- Flag is not present, resulting true
[13:51:37]: – TRSMinimap.waitFlag(): True
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: ERROR: Chop_Trees: Failed to find enough colors for tree
[13:51:37]: DETAIL: Chop_Relocate: Relocating to trees
[13:51:37]: – TRSMinimap._getSymbolColor()
[13:51:38]: —- Loaded symbol: Fishing Spot
[13:51:38]: —- Found symbol bitmap 42
[13:51:38]: —- Found Fishing Spot symbol at {X = 694, Y = 110}
[13:51:38]: – TRSMinimap._getSymbolColor(): 16684078
[13:51:38]: – TRSMinimap.waitFlag()
[13:51:38]: —- Waiting until flag distance equals 0…

Invalid Gold

2013-12-30 17:00:48

The script for me just starts and stops.

KingMario111

2013-12-30 17:05:44

[ATTACH=CONFIG]22633[/ATTACH]

There seems to be a problem with your bot. It doesnt know how to log a player in and it also won't start the script. :c

public3n3my

2013-12-30 18:20:31

Final progress report from when the script shutdown (not sure why it did)

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        3 Days, 11 Hours, 44 Minutes and 23 Seconds |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Bank                                  |
|    Active:   False                                 |
|    Reason:                                         |
|      Tree Type:  Willow                            |
|      Loads Done: 1,131                             |
|      Logs Cut:   31,665                            |
|      Logs P/H:   378                               |
|      Levels Up:  0                                 |
|      Experience: 2,137,388                         |
|      Breaks:     57                                |
|____________________________________________________|
|____________________________________________________/

From: KingMario111
[ATTACH=CONFIG]22633[/ATTACH]

There seems to be a problem with your bot. It doesnt know how to log a player in and it also won't start the script. :c

That's because you haven't set it up to use your accounts details. You need to fill in the proper information at line 127, not just leave it as it is.

KingMario111

2013-12-30 19:55:26

Okay. I see that this is more complicated than usual. What would I need to fill out in the account details in player settings to make this work?

I'm very new at this. I have only been able to make the guilf fishing script work.

public3n3my

2013-12-30 20:16:23

http://villavu.com/forum/showthread.php?t=47714

Read the sections about the player manager.

mrisperfect

2014-01-04 19:55:37

Quick question: Is bot only for cutting and banking willows? Because I would love to cut Oak logs instead :)

Coh3n

2014-01-05 12:32:30

From: public3n3my
It's something I've also noticed happening, the log displays this over and over even though it's standing right next to a tree. I have noticed that it happens when the camera has been spun around so that it's facing directly south and looking straight down, I've find that if I manually click on the compass to spin the camera around then the script will pick up and go back to work.

I am aware of this, and I could edit the colors which may improve the problem, but it will likely still happen, or the mouse will sporadically move all over the screen. This would be due to not all areas of the tree being "clickable", so I've kept it the way it is to lessen the amount of random mouse movement to "unclickable" areas.

From: mrisperfect
Quick question: Is bot only for cutting and banking willows? Because I would love to cut Oak logs instead :)

Yes, only Willows. It used to do Oaks as well, but I removed that when updating for RS3, and unfortunately I won't be adding it back in. I just do not have the time right now.

public3n3my

2014-01-05 20:47:40

From: Coh3n
I am aware of this, and I could edit the colors which may improve the problem, but it will likely still happen, or the mouse will sporadically move all over the screen. This would be due to not all areas of the tree being "clickable", so I've kept it the way it is to lessen the amount of random mouse movement to "unclickable" areas.

If you're able to keep track of the number of times that it fails to find the colours/clicks near the fish icon, then you could just have it click the compass to reset the camera after a certain number in a row. That way you don't have to adjust the colours/mouse movements and the bot would continue on as the camera would now be showing the way.
Of cause that makes it sound far more simpler then it probably is.

Coh3n

2014-01-05 22:04:46

From: public3n3my
If you're able to keep track of the number of times that it fails to find the colours/clicks near the fish icon, then you could just have it click the compass to reset the camera after a certain number in a row. That way you don't have to adjust the colours/mouse movements and the bot would continue on as the camera would now be showing the way.
Of cause that makes it sound far more simpler then it probably is.

It already counts how many times it fails, and it should quit after a certain amount (can't remember how many), so this shouldn't be hard to add. I'll look into it for the next version.

Chris!

2014-01-05 22:33:37

Nice script Coh3n, maybe once I'm up to scratch with this whole SRL6 deal I might be able to compete ;).

Coh3n

2014-01-05 22:55:42

From: Chris!
Nice script Coh3n, maybe once I'm up to scratch with this whole SRL6 deal I might be able to compete ;).

Good luck! :)

sk8rjess

2014-01-14 11:04:26

bevardis

2014-01-16 15:50:05


/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 77 -                   |
|====================================================|
|        6 Hours, 30 Minutes and 31 Seconds          |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: One Minute As Passed...               |
|    Active:   False                                 |
|    Reason:                                         |
|      Tree Type:  Willow                            |
|      Loads Done: 104                               |
|      Logs Cut:   2,912                             |
|      Logs P/H:   447                               |
|      Levels Up:  0                                 |
|      Experience: 196,560                           |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

Kaladin

2014-01-20 18:29:52

00:01:11]: – TRSMinimap._getSymbolColor()
[00:01:11]: —- Loaded symbol: Fishing Spot
[00:01:11]: —- Found symbol bitmap 42
[00:01:11]: —- Found Fishing Spot symbol at {X = 656, Y = 181}
[00:01:11]: – TRSMinimap._getSymbolColor(): 16684078
[00:01:13]: —- TRSGameTab.__initTabs(): Setup gametab properties
[00:01:13]: – TRSGameTabs.openTab(1)
[00:01:13]: —- Opening tab via gametab navigation bar
[00:01:19]: – TRSGameTabs.openTab(1): result = False
[00:01:19]: – TRSGameTabs.openTab(2)
[00:01:19]: —- Opening tab via gametab navigation bar
[00:01:25]: – TRSGameTabs.openTab(2): result = False
[00:01:25]: – TPlayer.login()
[00:01:25]: —- TPlayer.loginToLobby()
[00:01:25]: —— Player Ago is not active…
[00:01:25]: —- TPlayer.loginToLobby(): False
[00:01:26]: – TPlayer.login(): False
[00:01:26]: – Freeing the minimap mask

This is my log, basically it logs in, opens up the ESC menu and then exits. Any idea on a fix?

Sorry if obvious fail on my part, I did try to fix myself before posting ;)

EDIT: I think the problem stems from misreading my WC level? Says im -1 WC level just before exit in the console.

Coh3n

2014-01-20 18:47:00

From: agoson
00:01:11]: – TRSMinimap._getSymbolColor()
[00:01:11]: —- Loaded symbol: Fishing Spot
[00:01:11]: —- Found symbol bitmap 42
[00:01:11]: —- Found Fishing Spot symbol at {X = 656, Y = 181}
[00:01:11]: – TRSMinimap._getSymbolColor(): 16684078
[00:01:13]: —- TRSGameTab.__initTabs(): Setup gametab properties
[00:01:13]: – TRSGameTabs.openTab(1)
[00:01:13]: —- Opening tab via gametab navigation bar
[00:01:19]: – TRSGameTabs.openTab(1): result = False
[00:01:19]: – TRSGameTabs.openTab(2)
[00:01:19]: —- Opening tab via gametab navigation bar
[00:01:25]: – TRSGameTabs.openTab(2): result = False
[00:01:25]: – TPlayer.login()
[00:01:25]: —- TPlayer.loginToLobby()
[00:01:25]: —— Player Ago is not active…
[00:01:25]: —- TPlayer.loginToLobby(): False
[00:01:26]: – TPlayer.login(): False
[00:01:26]: – Freeing the minimap mask

This is my log, basically it logs in, opens up the ESC menu and then exits. Any idea on a fix?

Sorry if obvious fail on my part, I did try to fix myself before posting ;)

EDIT: I think the problem stems from misreading my WC level? Says im -1 WC level just before exit in the console.

Umm that debug looks odd. I'm not sure why there's some gametab debug and then the login stuff. Could you post the debug from the very beginning? Also, it won't have anything to do with the woodcutting level, that doesn't effect if the script runs or not.

Kaladin

2014-01-20 18:50:00

I've Pm'd you, it has my login name in :P

Coh3n

2014-01-20 19:10:31

From: agoson
I've Pm'd you, it has my login name in :P

Oh, it's not detecting that you've logged in. Make sure your graphics are set properly. This usually happens when your interface transparency isn't set all the way to 0. If it is, check this thread for other graphics settings.

Kaladin

2014-01-20 19:40:30

Ahh, thank you very much. I missed the slim headers bit, I did refer to that post beforehand xD

Thanks again :)

Coh3n

2014-01-20 20:41:10

From: agoson
Ahh, thank you very much. I missed the slim headers bit, I did refer to that post beforehand xD

Thanks again :)

No problem, glad it's working now. :)

alwaysasuspect

2014-01-22 19:32:26

I seem to have a banking problem that I have yet to figure out.
The script runs great until it opens the bank then it has a hard time depositing the logs, then it logs out and starts all over again.

Here is my Debug :D


[0:03:27]: -- TRSMinimap.waitFlag(): True
[0:03:28]: SUCCESS: Walk_ToLoc: Walked to location: Bank
[0:03:28]: -- TRSMainscreen.findObject()
[0:03:28]: ---- Colors found: 13929
[0:03:28]: ---- Possible objects found: 7
[0:03:29]: ---- isMouseOverText()
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ---- isMouseOverText(): False
[0:03:30]: ---- isMouseOverText()
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ---- isMouseOverText(): False
[0:03:30]: ---- isMouseOverText()
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:31]: ------ Current mouse-over text: ""
[0:03:31]: ------ Current mouse-over text: ""
[0:03:31]: ------ Current mouse-over text: ""
[0:03:31]: ------ Current mouse-over text: ""
[0:03:31]: ---- isMouseOverText(): False
[0:03:31]: ---- isMouseOverText()
[0:03:31]: ------ Current mouse-over text: "Bank Counter"
[0:03:31]: ------ Found "Bank" in mouse-over string: "Bank Counter"
[0:03:31]: ---- isMouseOverText(): True
[0:03:31]: ---- Successfully mouse'd object
[0:03:31]: -- TRSMainscreen.findObject(): True
[0:03:41]: ERROR: Bank_Logs: Failed to find bank screen
[0:03:41]: -- TRSGameTabs.openTab(2)
[0:03:41]: ---- Opening tab via gametab navigation bar
[0:03:47]: -- TRSGameTabs.openTab(2): result = False
[0:03:47]: -- HINT: findSpinTicket(): Backpack is not open, consider calling tabBackpack.open() first
[0:03:47]: -- TRSMainscreen.findObject()
[0:03:47]: ---- Colors found: 359
[0:03:47]: ---- Possible objects found: 0
[0:03:47]: -- TRSMainscreen.findObject(): False
[0:03:47]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:03:47]: ERROR: Bank_Logs: Failed to find bank screen
[0:03:47]: -- TRSGameTabs.openTab(2)
[0:03:47]: ---- Opening tab via gametab navigation bar
[0:03:53]: -- TRSGameTabs.openTab(2): result = False
[0:03:53]: -- HINT: findSpinTicket(): Backpack is not open, consider calling tabBackpack.open() first
[0:03:53]: -- TRSMainscreen.findObject()
[0:03:53]: ---- Colors found: 363
[0:03:53]: ---- Possible objects found: 0
[0:03:53]: -- TRSMainscreen.findObject(): False
[0:03:53]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:03:53]: ERROR: Bank_Logs: Failed to find bank screen
[0:03:53]: -- TRSGameTabs.openTab(2)
[0:03:53]: ---- Opening tab via gametab navigation bar

Any ideas on how to fix it? all my gfx settings seem to be in order and I tried reinstalling, and updating everything.

bevardis

2014-01-23 10:24:17

I came here to show my 99 wc.. Achieved using this script!

Coh3n

2014-01-23 17:24:30

From: alwaysasuspect
I seem to have a banking problem that I have yet to figure out.
The script runs great until it opens the bank then it has a hard time depositing the logs, then it logs out and starts all over again.

Here is my Debug :D


[0:03:27]: -- TRSMinimap.waitFlag(): True
[0:03:28]: SUCCESS: Walk_ToLoc: Walked to location: Bank
[0:03:28]: -- TRSMainscreen.findObject()
[0:03:28]: ---- Colors found: 13929
[0:03:28]: ---- Possible objects found: 7
[0:03:29]: ---- isMouseOverText()
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ------ Current mouse-over text: "Search Bookcase"
[0:03:29]: ---- isMouseOverText(): False
[0:03:30]: ---- isMouseOverText()
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ---- isMouseOverText(): False
[0:03:30]: ---- isMouseOverText()
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:30]: ------ Current mouse-over text: ""
[0:03:31]: ------ Current mouse-over text: ""
[0:03:31]: ------ Current mouse-over text: ""
[0:03:31]: ------ Current mouse-over text: ""
[0:03:31]: ------ Current mouse-over text: ""
[0:03:31]: ---- isMouseOverText(): False
[0:03:31]: ---- isMouseOverText()
[0:03:31]: ------ Current mouse-over text: "Bank Counter"
[0:03:31]: ------ Found "Bank" in mouse-over string: "Bank Counter"
[0:03:31]: ---- isMouseOverText(): True
[0:03:31]: ---- Successfully mouse'd object
[0:03:31]: -- TRSMainscreen.findObject(): True
[0:03:41]: ERROR: Bank_Logs: Failed to find bank screen
[0:03:41]: -- TRSGameTabs.openTab(2)
[0:03:41]: ---- Opening tab via gametab navigation bar
[0:03:47]: -- TRSGameTabs.openTab(2): result = False
[0:03:47]: -- HINT: findSpinTicket(): Backpack is not open, consider calling tabBackpack.open() first
[0:03:47]: -- TRSMainscreen.findObject()
[0:03:47]: ---- Colors found: 359
[0:03:47]: ---- Possible objects found: 0
[0:03:47]: -- TRSMainscreen.findObject(): False
[0:03:47]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:03:47]: ERROR: Bank_Logs: Failed to find bank screen
[0:03:47]: -- TRSGameTabs.openTab(2)
[0:03:47]: ---- Opening tab via gametab navigation bar
[0:03:53]: -- TRSGameTabs.openTab(2): result = False
[0:03:53]: -- HINT: findSpinTicket(): Backpack is not open, consider calling tabBackpack.open() first
[0:03:53]: -- TRSMainscreen.findObject()
[0:03:53]: ---- Colors found: 363
[0:03:53]: ---- Possible objects found: 0
[0:03:53]: -- TRSMainscreen.findObject(): False
[0:03:53]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:03:53]: ERROR: Bank_Logs: Failed to find bank screen
[0:03:53]: -- TRSGameTabs.openTab(2)
[0:03:53]: ---- Opening tab via gametab navigation bar

Any ideas on how to fix it? all my gfx settings seem to be in order and I tried reinstalling, and updating everything.

It's not detecting that the bank screen has been opened. I read somewhere that this happened if your XP counter is on the chat box? I'm not sure why that would happen, but that might be the issue.

From: bevardis
I came here to show my 99 wc.. Achieved using this script!

Congrats! Glad the script is working well. :)

alwaysasuspect

2014-01-24 09:05:41

Thank you very much for the help cohen. That was it.

wokidi101

2014-01-25 12:11:07

File[C:\Users\Karl\Desktop\Simba\Includes\SRL-6/logs/SRL log (25-01-14 at 06.07.17 PM).txt] has not been freed in the script, freeing it now.

it has been like that every time i press F9 or the green arrow

Unreal

2014-02-04 23:34:20

Excuse me first for having to post cant seem to find any post in the last 80 pages that addresses a minor problem is that at the lowest willow tree that if the camera is facing south it cant find any trees to cut

Coh3n

2014-02-05 21:12:49

From: Unreal
Excuse me first for having to post cant seem to find any post in the last 80 pages that addresses a minor problem is that at the lowest willow tree that if the camera is facing south it cant find any trees to cut

Someone mentioned something similar a while ago. What I can do is have it "reset" the camera angle if it can't find any trees. I just haven't had the chance to update the script. I'll put it on my todo list though. :)

E: I've uploaded Rev. 78. I added the find tree failsafe I talked about above. I also removed levels gained from the progress reports since they don't work anyway. Enjoy! :)

Marmellot

2014-02-06 03:31:16

I can't seem to get the script to login. I saved a players file with 2 players in Simba/Includes/Players as "default" with the login name, nickname, display name, and password. I replaced the Players.Setup parameter strings with the appropriate info for one of the players. I've tried logging in manually but nothing happens. When I run it, it stops at the login screen and gives the prompt "No Stats account entered, would you like to set one up?". If I click yes it just opens the Simba folder.

Unreal

2014-02-06 06:37:26

i havent bot runescape in a long time so how to deal with the line 247 findspinticket

Coh3n

2014-02-06 12:57:22

From: Marmellot
I can't seem to get the script to login. I saved a players file with 2 players in Simba/Includes/Players as "default" with the login name, nickname, display name, and password. I replaced the Players.Setup parameter strings with the appropriate info for one of the players. I've tried logging in manually but nothing happens. When I run it, it stops at the login screen and gives the prompt "No Stats account entered, would you like to set one up?". If I click yes it just opens the Simba folder.

Have you tried just clicking no?

From: Unreal
i havent bot runescape in a long time so how to deal with the line 247 findspinticket

I have no idea what that is. Is that an error when you try and run the script? E: Just found out the name of findSpinTicket was changed in SRL. This will be fixed shortly. E: Fixed in the latest update.

Ashaman88

2014-02-06 14:05:57

From: Coh3n
Have you tried just clicking no?

I have no idea what that is. Is that an error when you try and run the script? E: Just found out the name of findSpinTicket was changed in SRL. This will be fixed shortly. E: Fixed in the latest update.

Didn't realize anyone was using that function since there was claimspinticket which called findspinticket… was there a reason you were using that one? That was the only function I didn't leave in b/c I didn't think it was meant to be used

Coh3n

2014-02-07 00:19:32

From: Ashaman88
Didn't realize anyone was using that function since there was claimspinticket which called findspinticket… was there a reason you were using that one? That was the only function I didn't leave in b/c I didn't think it was meant to be used

Looking at the code I'm not sure why I used it instead of claimSpinTicket. claimSpinTicket may have clicked the inventory tab originally; I honestly don't know, but I'm sure I had a good reason at the time.

Unreal

2014-02-07 07:49:57

Ok ive updated all my plugins and it seems to be working perfectly.

Thanks Coh3n for monitoring posts and answering to our problems and providing solutions

E:Got it up and running hoping to send in a proggy after tonight. Really grateful to ya'll doing this stuff for free and letting me leech of it without asking anything for return ;););););)

Coh3n

2014-02-08 18:09:34

Not a bad run. :) Stopped manually.


/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 78 -                   |
|====================================================|
|        1 Days, 2 Hours, 16 Minutes and 12 Seconds  |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 498                               |
|      Logs Cut:   13,403                            |
|      Logs P/H:   510                               |
|      Experience: 904,702                           |
|      Breaks:     7                                 |
|____________________________________________________|
|____________________________________________________/

Marmellot

2014-02-10 03:49:26

From: Coh3n
Have you tried just clicking no?

Yes, I did try that. Nothing happens regardless of whether or not you choose yes or no. The reason I mentioned that at all was because I assumed a stats account is something I should set up, but clicking yes just opened a folder and I'm not sure how that helps me set up an account.

Coh3n

2014-02-10 13:55:58

From: Marmellot
Yes, I did try that. Nothing happens regardless of whether or not you choose yes or no. The reason I mentioned that at all was because I assumed a stats account is something I should set up, but clicking yes just opened a folder and I'm not sure how that helps me set up an account.

Yeah that's definitely not supposed to happen, but that isn't related to your problem. Right now stats isn't working anyway so having an account won't make a difference. Could you please report this bug here, though? The stats one opening a folder, not that the script is doing nothing.

If the script isn't doing anything when you hit play there's a good chance you don't have your graphics set properly. Make sure they're set to fixed screen and OpenGL mode. There are a few other settings you need to worry about, and I suggest going through this tutorial.

Marmellot

2014-02-10 20:10:58

Alright, I will report the stats bug there.

I had already set up my graphics settings according to that page, but I just went through to double check and they are indeed identical. Before getting the script to function after the login screen, I feel we should deal with getting it to login on its own. The login screen appears the same regardless of the graphics settings, so I don't think the graphics settings are the issue here.

Oh, I think I found the problem. I don't know why I didn't look at the debug output in the first place. Yeah, I misinterpreted the instructions for filling in the account information. It says 'Player''s Nickname/Login Name/Display Name' in the template, so I went and entered all of those separated by slashes, thinking the script would parse that into separate strings. I changed it to just the nickname and it is working!

Now I'm trying to figure out how to get multiple to run at once.
Players.Setup(['account1', 'account2'], 'default');
Like that? Or should I call it separately for each player? Do I have to run separate instances of simba or can one instance open multiple game windows?

Coh3n

2014-02-11 11:08:18

From: Marmellot
Alright, I will report the stats bug there.

I had already set up my graphics settings according to that page, but I just went through to double check and they are indeed identical. Before getting the script to function after the login screen, I feel we should deal with getting it to login on its own. The login screen appears the same regardless of the graphics settings, so I don't think the graphics settings are the issue here.

Oh, I think I found the problem. I don't know why I didn't look at the debug output in the first place. Yeah, I misinterpreted the instructions for filling in the account information. It says 'Player''s Nickname/Login Name/Display Name' in the template, so I went and entered all of those separated by slashes, thinking the script would parse that into separate strings. I changed it to just the nickname and it is working!

Ah yes, sorry for the confusion.

From: Marmellot

Now I'm trying to figure out how to get multiple to run at once.
Players.Setup(['account1', 'account2'], 'default');

Yes, that will alternate between the two accounts (one one instance of SMART).

From: Marmellot

Like that? Or should I call it separately for each player? Do I have to run separate instances of simba or can one instance open multiple game windows?

If you want multiple game windows (i.e. run both players at the exact same time) you need two separate instances of Simba. I think it's possible to run multiple SMART's in one Simba, but I've never tried, and I know running multiple instances works for what you want.

nutta124

2014-02-15 18:00:58

when it click outside of the bank it keep trying to find the bank but the mouse courser is on a bookshelf?? help?

Coh3n

2014-02-15 18:40:44

From: nutta124
when it click outside of the bank it keep trying to find the bank but the mouse courser is on a bookshelf?? help?

Does it eventually recover?

I'd like to switch the primary walking method, I just don't have the time right now. I'll look into it for the next version though.

nutta124

2014-02-16 03:41:46

From: Coh3n
Does it eventually recover?

I'd like to switch the primary walking method, I just don't have the time right now. I'll look into it for the next version though.

yeah, it will logout and log back in go to cut the tree with full inventory then bank. :/

Coh3n

2014-02-16 16:19:32

From: nutta124
yeah, it will logout and log back in go to cut the tree with full inventory then bank. :/

At least the script isn't stopping. I'll try to fix this for the next version.

Got this report today, stopped because SMART went all black. Never seen that before.


/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 78 -                   |
|====================================================|
|        2 Days, 13 Hours, 1 Minutes and 58 Seconds  |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Lost                                  |
|    Active:   False                                 |
|    Reason:   Failed to find trees 60 times         |
|      Tree Type:  Willow                            |
|      Loads Done: 1,148                             |
|      Logs Cut:   30,932                            |
|      Logs P/H:   507                               |
|      Experience: 2,087,910                         |
|      Breaks:     18                                |
|____________________________________________________|
|____________________________________________________/

Coh3n

2014-02-19 22:18:46

Uploaded the new version. Changes:


Added the option to disable all debug (except progress report)
Fixed a relocation bug
Fixed bank opening (updated colors)
Fixed a major CTS bug (amazing that it didn't cause problems until now)
Fixed a bug where it would sometimes walk too far away from the bank
Added a failsafe in case a player gets stuck with an "unbankable" item (it will no longer endlessly try to bank it)
Added "Exp P/H" to single player progress reports
Removed the Woodcutting level recording as it's no longer used
Added DirectX support (simply change your graphics setting and it will work)
Removed Levels Gained from the progress report and added compass resetting if trees can't be found.

Enjoy,
Coh3n

E: Added new version with updated Willow tree colors. New version also uses SRL's banking function rather than a custom one.

Pierite

2014-03-03 06:32:37

Hi,

Just downloaded the script and it won't run, stating:

Exception in Script: Unknown declaration "BANK_NPC_DRAYNOR" at line 633, column 29

Looking at my simba vs the git repository, it seems my simba is out of date, never mind :D

However now there is another issue (this time with the SRL6 __findNPC function, which doesn't want to find any of the bank people =d.

Is anyone else having this issue?

P.s.
I find that tolerance 6 works better than 8 on willows, much less false positives, script is flawless for willow chopping so far :D.

Ashaman88

2014-03-03 07:48:02

Apparently another graphics update today

Pierite

2014-03-03 07:48:47

From: Ashaman88
Apparently another graphics update today

It's ok, i submitted a bug report with a potential fix :)

This script works very well with it.

Spectral

2014-03-03 09:53:58

Exception in Script: Unknown declaration "BANK_NPC_DRAYNOR" at line 633, column 29
Still not Sure what to do with this. Any tips?

Coh3n

2014-03-03 12:20:54

From: Spectral
Exception in Script: Unknown declaration "BANK_NPC_DRAYNOR" at line 633, column 29
Still not Sure what to do with this. Any tips?

Read a few posts above; your SRL needs to be updated.

Spectral

2014-03-04 01:30:16

From: Coh3n
Read a few posts above; your SRL needs to be updated.

Not working again. At the bank, it just stands there and puts the red dot on the wall of the wizards house. Tips?

Pierite

2014-03-04 02:11:11

From: Spectral
Not working again. At the bank, it just stands there and puts the red dot on the wall of the wizards house. Tips?

This isn't a script issue,

SRL cannot detect Draynor bankers.

Under bugs, you'll find the issue
I have a hotfix type thing in there, see if it works for you.

Coh3n

2014-03-04 13:59:17

From: Pierite
This isn't a script issue,

SRL cannot detect Draynor bankers.

Under bugs, you'll find the issue
I have a hotfix type thing in there, see if it works for you.

The fix is in the latest version of SRL. Just wait for your automatic updater to do its thing. :)

stickyninja

2014-03-14 22:17:20

Is there a way to use DirectX plugin with this script?

Coh3n

2014-03-15 00:37:35

From: stickyninja
Is there a way to use DirectX plugin with this script?

Just have the plugin in your Simba/Plugins folder and set your graphics mode to DirectX.

stickyninja

2014-03-15 17:07:06

From: Coh3n
Just have the plugin in your Simba/Plugins folder and set your graphics mode to DirectX.

Okay thanks!

SpaceCadetMac

2014-03-16 16:52:51

The script randomly stops for me, it displays

Location: Bank |
| Active: False |
| Reason: Failed to find trees 60 times

Coh3n

2014-03-16 17:07:49

From: beastlynoob
The script randomly stops for me, it displays

Location: Bank |
| Active: False |
| Reason: Failed to find trees 60 times

I'm surprised this script works at all right now. There is some symbol finding that it relies on, and as far as I know, the symbol finding in SRL right now doesn't work (due to the new symbols). That's likely what your problem is.

SpaceCadetMac

2014-03-16 17:19:59

It actually runs like 1-2 hours before this happens

Coh3n

2014-03-16 19:58:24

From: beastlynoob
It actually runs like 1-2 hours before this happens

It likely has something to do with the symbols still. Likely when it tries to relocate. Is the player actually in the bank when that happens?

SpaceCadetMac

2014-03-17 11:49:56

From: Coh3n
It likely has something to do with the symbols still. Likely when it tries to relocate. Is the player actually in the bank when that happens?

Il set it to take a screenshot when it stops, and then il report back

SpaceCadetMac

2014-03-17 12:58:26

I am also getting
Opening tab via gametab navigation bar
[0:00:24]: – TRSGameTabs.openTab(2): result = False
[0:00:24]: – TRSGameTabs.openTab(2)
[0:00:24]: —- Opening tab via gametab navigation bar

and it repeatedly opens and closes the backpack tab

Coh3n

2014-03-17 12:59:53

As far as I know that's fixed in the latest version of SRL. You just need to wait for the update to go through.

Olly

2014-03-17 13:00:20

From: beastlynoob
I am also getting
Opening tab via gametab navigation bar
[0:00:24]: – TRSGameTabs.openTab(2): result = False
[0:00:24]: – TRSGameTabs.openTab(2)
[0:00:24]: —- Opening tab via gametab navigation bar

and it repeatedly opens and closes the backpack tab

Pretty sure that's a SRL bug which im currently fixing.. try updating your srl in a few. :)

SpaceCadetMac

2014-03-17 19:09:47

From: Olly
Pretty sure that's a SRL bug which im currently fixing.. try updating your srl in a few. :)

its fixed, thanks a ton. that was quick
il troubleshoot that error i got earlier with it not being able to find a tree 2 hours after running

SpaceCadetMac

2014-03-18 01:47:21

Now i am getting an error after 4 mins or so of running. I get the problem that it couldnt find trees even though it is right next to them

Coh3n

2014-03-19 10:18:34

From: beastlynoob
Now i am getting an error after 4 mins or so of running. I get the problem that it couldnt find trees even though it is right next to them

Make sure your graphics are set properly.

Does anyone else have this problem?

yvan49

2014-03-19 14:11:29

Works perfectly for me. Got from 80-98 woodcutting with your bot thank you very much! I have enough willow logs to get to 99 firemaking now! About to hit level 99 woodcutting by cutting Ivy. And the only problem I can think of is when it randomly closes because it says it couldn't find a tree but only happens once in a while but sometimes I got 18 hours without any problems. Thanks again!!

SpaceCadetMac

2014-03-20 17:40:06

I tried messing with my settings, i did mess then up( i guess runescape auto set my settings), but now i am getting an error where it gets a full inv of logs and then stops and logs out
It goes through the usual found mouseover text, chopping tree. But randomly says logout
Il try to re download the script and run it and i will report back

Coh3n

2014-03-20 22:40:25

From: beastlynoob
I tried messing with my settings, i did mess then up( i guess runescape auto set my settings), but now i am getting an error where it gets a full inv of logs and then stops and logs out
It goes through the usual found mouseover text, chopping tree. But randomly says logout
Il try to re download the script and run it and i will report back

Post the debug if it happens again. That should help.

SpaceCadetMac

2014-03-21 11:11:22

Reinstalled the script and now it works perfectly, must have accidentally adjusted something
Thanks a ton

oberhofedavi

2014-03-22 00:48:11

So far not bad, but I can only get it to work for about an hour at a time.

What I've noticed is that it's having problems determining its location sometimes. Every time I start up at the willows, it says I'm at the bank and immediately heads further south to look for willows(of course it doesn't find any down there.)
Also I'm curious as to why when it can't find the willows, it stops, but when it can't find the bank it just keeps re-logging. I think it would be kind of nice if it would re-log after failing to find trees simply because I've actually watched it glitch up at the trees, and open another menu, so it just stops(one time after only a single load)

Coh3n

2014-03-22 11:32:17

From: oberhofedavi
So far not bad, but I can only get it to work for about an hour at a time.

What I've noticed is that it's having problems determining its location sometimes. Every time I start up at the willows, it says I'm at the bank and immediately heads further south to look for willows(of course it doesn't find any down there.)
Also I'm curious as to why when it can't find the willows, it stops, but when it can't find the bank it just keeps re-logging. I think it would be kind of nice if it would re-log after failing to find trees simply because I've actually watched it glitch up at the trees, and open another menu, so it just stops(one time after only a single load)

The location detection relies on the minimap symbols, which are currently broken in SRL.

I'm not sure why it logs in again if it can't find the bank (it uses SRL's open back function so maybe that's buggy), as far as I know it's setup to logout like it does if the trees can't be found. What do you mean it opens another menu?

oberhofedavi

2014-03-23 02:07:47

From: Coh3n
What do you mean it opens another menu?

The one time I watched it, it opened up my homeport menu, and it couldn't find the trees because of it. I'm sure it was just a one-time glitch.

Coh3n

2014-03-23 13:50:30

From: oberhofedavi
The one time I watched it, it opened up my homeport menu, and it couldn't find the trees because of it. I'm sure it was just a one-time glitch.

What's the homeport menu? What do you click to open it? Sorry, I don't play RS anymore and I don't know most of the features that were added in like the last year. :p

oberhofedavi

2014-03-24 02:08:40

From: Coh3n
What's the homeport menu? What do you click to open it? Sorry, I don't play RS anymore and I don't know most of the features that were added in like the last year. :p

It's the menu for teleporting to your activated lodestones, the button is in one of the corners of the minimap.

Coh3n

2014-03-24 11:02:48

From: oberhofedavi
It's the menu for teleporting to your activated lodestones, the button is in one of the corners of the minimap.

Oh, we just call that the loadstone screen in SRL. If it's only happened once I don't think there's anything to worry about; it was probably just lag. Let me know if it keeps happening again.

Yoboi

2014-03-28 23:10:33

Whenever I run this script, there is huge problems banking, maybe 1/3 times it completes one load and banks properly. I can usually only run this for 5 minutes because the banking messes up and my guy tries to bank at the wizard north of the bank booth :[

Coh3n

2014-03-29 12:41:57

From: Yoboi
Whenever I run this script, there is huge problems banking, maybe 1/3 times it completes one load and banks properly. I can usually only run this for 5 minutes because the banking messes up and my guy tries to bank at the wizard north of the bank booth :[

This script uses SRL's open bank function, so if it's not opening the bank for you, you should report that bug here.

Xgremreaper

2014-04-04 17:24:48

I can not get this to work. I can get it to login but it will not cut the tree's.

Coh3n

2014-04-05 11:37:19

From: Xgremreaper
I can not get this to work. I can get it to login but it will not cut the tree's.

You need to provide more information than that. Some debug text would be very helpful.

cadet54

2014-04-06 10:32:24

This script seems to work ok, I am far from an expert on scripts but I just had to play around with the size of the box used for detecting pixel shift as well as the animation shift option at the top in player set up. I played around with the tree colour to. Thanks for the hard work you have put into it :).

Coh3n

2014-04-06 11:52:51

From: cadet54
This script seems to work ok, I am far from an expert on scripts but I just had to play around with the size of the box used for detecting pixel shift as well as the animation shift option at the top in player set up. I played around with the tree colour to. Thanks for the hard work you have put into it :).

Yeah the animating kind of depends on what your player is wearing, and the colors seem to change often. Glad you got it working. :)

Vinnybod

2014-04-12 03:21:36

Xgremreaper

2014-04-12 10:34:17

[0:00:02]: ___
[0:00:02]: ____ /\__\
[0:00:02]: /\___\ ____ \/ _/
[0:00:02]: _____ \/_ / /\___\ \/ _____
[0:00:02]: /\____\ _______/ / /___ _\/___ \_____ /\____\
[0:00:02]: / / ___\/\______\/ /____\\____/ /_____\/ / ____\
[0:00:02]: / / /__ / / ___ / ____ //___ / ____ \/ /___\
[0:00:02]: / / /___\ / /__/ / / / / /____/ / / / / /____ /
[0:00:02]: \/_______//______/_/ /_/_/______/_/__/_/_/____/ /
[0:00:03]: \/___________________/
[0:00:03]: Draynor Chop N' Bank ~ Version 80!
[0:00:03]: – setupSRL()
[0:00:03]: —- Setting up SRL…
[0:00:03]: —- initSmart():
[0:00:03]: —— Attempting to pair to a previously spawned client
[0:00:03]: —— smartPairToExistingClient():
[0:00:03]: ——– Found 1 free client(s), attempting to pair to one…
[0:00:04]: ——– Failed to pair to SMART[4820]
[0:00:04]: —— smartPairToExistingClient(): result = false
[0:00:04]: —— Attempting to spawn a new client..
[0:00:04]: —— smartCreateClient():
[0:00:04]: ———- smartGetParameters(): Succesfully grabbed paramters
[0:00:04]: ——– getJavaPath():
[0:00:04]: ———- Attempting to search for your Java path
[0:00:04]: ———- Found your java path @ C:\Program Files (x86)\Java\jre7\bin\javaw.exe
[0:00:04]: ——– getJavaPath()
[0:00:04]: ——– Using parameters [http://world35.runescape.com/, f591159006225075300]
[0:00:04]: ——– Using plugins "opengl32.dll,d3d9.dll"
[0:00:08]: ——– Succesfully spawned a client, attempting to target
[0:00:08]: ———- smartSetAsTarget(): Succesfully set SMART[4704] as Simba's target
[0:00:08]: —— smartCreateClient(): result = true
[0:00:08]: —— Succesfully initialized via spawning a new client
[0:00:08]: —- initSmart()
[0:00:08]: —— smartSetupDrawing(): Succesfully setup SMART drawing
[0:00:08]: —- Waiting up to 5 minutes for RS to load…
[0:00:22]: —— __setInputBoxes(): Set username and password boxes
[0:00:22]: —- Client is ready.
[0:00:22]: —- Setup SRL in 19609ms.
[0:00:22]: – setupSRL(): True
[0:00:22]: – TPlayerArray.setup()
[0:00:22]: —- Loaded player: my email
[0:00:22]: – TPlayerArray.setup(): Success
[0:00:22]: Loading, please wait…
[0:00:22]: – TPlayer.login()
[0:00:22]: —- TPlayer.loginToLobby()
[0:00:23]: —— myemail (myguy)
[0:00:23]: —— Entering username…
[0:00:25]: —— Entering password…
[0:00:29]: ——– Saving screenshot: IP_address.png
[0:00:29]: —— Found lobby screen
[0:00:29]: —- TPlayer.loginToLobby(): True
[0:00:29]: —— TRSLobby.findPlayButton(): result = True
[0:01:30]: —- WARNING: Unknown login string: ""
[0:01:30]: —- HINT: Please report this issue in the SRL bugs section of the forum
[0:01:30]: —— Saving screenshot: unknown_login_count.png
[0:01:30]: —- Login response: One minute as passed…
[0:01:53]: —— All players inactive…
[0:01:54]: – TPlayer.login(): False
[0:01:54]: – TRSMinimap._getSymbolColor()
[0:01:54]: —- Loaded symbol: Fishing Spot
[0:01:54]: —- Found symbol bitmap 42
[0:01:54]: – TRSMinimap._getSymbolColor(): -1
[0:01:54]: PLAYER: Find_PlayerLocation: myguy: Location = Bank
[0:02:03]: —- TRSGameTab.__initTabs(): Setup gametab properties
[0:02:03]: – TPlayer.login()
[0:02:03]: —- TPlayer.loginToLobby()
[0:02:03]: —— Player myguy is not active…
[0:02:03]: —- TPlayer.loginToLobby(): False

This is what happens.

Vinnybod

2014-04-12 16:26:44

Xgremreaper

I was getting that same error, make sure your runescape is set up exactly how it shows in this thread.

Apparently I can't post links?
thread number = 107365

Xgremreaper

2014-04-13 10:37:39

From: Vinnybod
Xgremreaper

I was getting that same error, make sure your runescape is set up exactly how it shows in this thread.

Apparently I can't post links?
thread number = 107365

Thank you i will try that. I have had other scripts work but maybe something isn't working right.

AnonUser

2014-05-01 02:24:10

Why is it that when I download the script, it doesn't show my SRL or SPS anymore nor can I find it under Extensions? Please help, I'm new to all of this.

The Mayor

2014-05-01 02:25:16

From: AnonUser
Why is it that when I download the script, it doesn't show my SRL or SPS anymore nor can I find it under Extensions? Please help, I'm new to all of this.

This is a bug in simba. You have to open Simba.exe from C:/Simba/

AnonUser

2014-05-01 02:28:53

Scratch that last post, I figured it out.. But then I try and run the script and this is all it does:

/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 80 - |
|====================================================|
| 5 Seconds |
|—————————————————-|
|____________________________________________________|
|____________________________________________________/
/=======================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 80 - |
|=======================================================================================|
| Ran for: 5 Seconds |
|?????? ???????? ???????????? ??????? ???????? ?????????? ???????? ???????????? ????????|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|?????? ???????? ???????????? ??????? ???????? ?????????? ???????? ???????????? ????????|
|???????????????????????????????????????????????????????????????????????????????????????|
| Totals: | 0 | | 0 | N/A | 0 | 0 |
|_______________________________________________________________________________________|
|_______________________________________________________________________________________/
[0:00:06]: Successfully executed.

I filled in the information necessary I dont understand :(

Coh3n

2014-05-03 14:05:45

That's not an error, the error will be printed before that. If there's nothing before that, check your log files in Simba/Includes/SRL-6/logs/.

netz

2014-05-05 21:34:46

Script is not working any more than :-

"[0:00:03]: – Succesfully freed SMART[2760]
[0:00:03]: Successfully executed."

g0dpk23

2014-05-07 19:13:22

I'm getting an error saying:

Exception in Script: Runtime error: "Access violation" at line 133, column 29
The following bitmaps were not freed: [Minimap Mask, SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (07-05-14 at 06.12.21 PM).txt] has not been freed in the script, freeing it now.

What do I do?

Coh3n

2014-05-07 20:23:52

From: netz
Script is not working any more than :-

"[0:00:03]: – Succesfully freed SMART[2760]
[0:00:03]: Successfully executed."

From: g0dpk23
I'm getting an error saying:

Exception in Script: Runtime error: "Access violation" at line 133, column 29
The following bitmaps were not freed: [Minimap Mask, SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (07-05-14 at 06.12.21 PM).txt] has not been freed in the script, freeing it now.

What do I do?

You both probably didn't setup your players right. You need to make sure the name in the player form matches the name you entered into Rafiki.

bestplox

2014-06-08 04:07:26

Hello! I would like to ask you if you could update your script? The script seems unsteady because sometimes it just shuts down. I have feeling that i can't find colors after like 10min - 1hour session, which leads us to logging out to the login screen. Thanks :)

Shader

2014-06-08 15:11:38

Using it right now, works awesome! Thanks!

Coh3n

2014-06-08 19:10:09

From: bestplox
Hello! I would like to ask you if you could update your script? The script seems unsteady because sometimes it just shuts down. I have feeling that i can't find colors after like 10min - 1hour session, which leads us to logging out to the login screen. Thanks :)

Unfortunately I do not have the time this summer. If you're having trouble finding colors I suggest making sure your graphics (especially brightness) are set correctly.

Xlr

2014-06-18 06:42:05

Hey Coh3n, firstly, you did an amazing work, thank you so much !!! ;)

Secondly (huhu sorry, nothing is beautiful very long in this world :p), I got a liiiittle problem, to relocate where I'm (when relogin), as the tree symbol on the minimap is actually far from the tree (the fishing one is the nearest), when I relogin away from bank, my character is going south away from the trees ! D:
In that way, I couldn't have a 3hours+ session.
What dev did you use for your last day woodcutting session ? :confused:

Thanks for reading, have a great day !

Edit : Ps : Hey, why am not an old-timer, as I joined in 2007 O: )

The Mayor

2014-06-18 07:00:28

From: Xlr
Hey Coh3n, firstly, you did an amazing work, thank you so much !!! ;)

Secondly (huhu sorry, nothing is beautiful very long in this world :p), I got a liiiittle problem, to relocate where I'm (when relogin), as the tree symbol on the minimap is actually far from the tree (the fishing one is the nearest), when I relogin away from bank, my character is going south away from the trees ! D:
In that way, I couldn't have a 3hours+ session.
What dev did you use for your last day woodcutting session ? :redface:

Thanks for reading, have a great day !

Congrats on first post in 7 years! It runs south because it doesn't think it's at the willows yet. This is because the location recognition is reliant on the minimap symbols which have been outdated since the RS update a few months ago. You could create a new function which recognises a unique colour on the symbol or something? IDK what the fishing symbol looks like, but maybe you could make a quick fix by replacing this function:


function Find_PlayerLocation: String;
var
  dist: Integer;
  p: TPoint;
begin
  if (minimap.findSymbol(p, MM_SYMBOL_FISHING, minimap.getBounds())) then
  begin
    dist := Distance(p, minimap.getCenterPoint());
    DCnB_Debug('Find_PlayerLocation', 'Symbol Distance = ' + IntToStr(dist), DEBUG_DETAILS);

    if (dist > 50) then
      Result := 'Bank'
    else
      Result := 'Willows';

  end else
    Result := 'Bank';

  DCnB_Debug('Find_PlayerLocation', 'Location = ' + Result, DEBUG_PLAYER);
end;

with something like:


function Find_PlayerLocation: String;
var
  dist, x, y: Integer;
  p: TPoint;
begin                               //colour                    //tol
  if findColorSpiralTolerance(x, y, 1234567, minimap.getBounds(), 10, colorSetting(1, 0.00, 0.00)) then
  begin
    p := point(x, y);
    dist := Distance(p, minimap.getCenterPoint());
    DCnB_Debug('Find_PlayerLocation', 'Symbol Distance = ' + IntToStr(dist), DEBUG_DETAILS);

    if (dist > 50) then
      Result := 'Bank'
    else
      Result := 'Willows';

  end else
    Result := 'Bank';

  DCn

Xlr

2014-06-18 11:39:29

Hahaha thanks, allmost as old as you are, but am a ghost secretly ! :p

Thank you so much, as am a C/C++ programmer and not pascal, I was a bit bored of finding the way how to make it work correctly, now gonna be fixed !
Your work guys is amazing, keep it up !

French thanks !! :p

Ps : for all those who get a problem after the relogging, there was also another thing to check, remember to disable the annoying poll voting popup !

Coh3n

2014-07-04 08:04:25

From: Xlr
Ps : for all those who get a problem after the relogging, there was also another thing to check, remember to disable the annoying poll voting popup !

You can disable those? Or do you mean just close it?

SimonMattila

2014-07-13 13:12:14

Looking awesome! Gonna use it to finish of my last 20 levels of woodcutting

Nicodemus

2014-07-13 14:28:39

hi i'm new i got a problem with the mouseovertext, i cant click on any tree, is it because i dont use SMART? i use direct x cuz i got problems using OpenGL.

[ATTACH=CONFIG]23557[/ATTACH]

sorry if this is a newby question >.<

Coh3n

2014-07-13 15:36:06

From: Nicodemus
hi i'm new i got a problem with the mouseovertext, i cant click on any tree, is it because i dont use SMART? i use direct x cuz i got problems using OpenGL.

[ATTACH=CONFIG]23557[/ATTACH]

sorry if this is a newby question >.<

Does the mouse over text actually show up? I know when you move your mouse over the tree it only shows in certain areas. If it does show up, make sure you have the Direct X plugin (d3d9.dll) in your Simba/Plugins folder.

Nicodemus

2014-07-14 13:01:11

From: Coh3n
Does the mouse over text actually show up? I know when you move your mouse over the tree it only shows in certain areas. If it does show up, make sure you have the Direct X plugin (d3d9.dll) in your Simba/Plugins folder.

hi!
i dont got the problem anymore cuz im gonna use an other laptop and it supports OpenGL with no problems :D

Thank you for your help anyway! :3

Nicodemus

2014-07-21 07:39:37

it doesnt work 100% for me, it always says:
[0:00:43]: —- Current mouse-over text: ""
[0:00:43]: —- Current mouse-over text: ""
[0:00:43]: —- Current mouse-over text: ""
[0:00:43]: —- Current mouse-over text: ""
[0:00:43]: – isMouseOverText(): False
[0:00:43]: ERROR: Chop_Tree: Failed to find mouseOverText
[0:00:44]: – isMouseOverText()
[0:00:44]: —- Current mouse-over text: ""
[0:00:44]: —- Current mouse-over text: ""
[0:00:44]: —- Current mouse-over text: ""
[0:00:44]: —- Current mouse-over text: ""
[0:00:44]: —- Current mouse-over tex[0:00:44]: – isMouseOverText(): False
[0:00:44]: ERROR: Chop_Tree: Failed to find mouseOverText
[0:00:44]: – isMouseOverText()
[0:00:44]: —- Current mouse-over text: ""
[0:00:44]: —- Current mouse-over text: ""
[0:00:44]: —- Current mouse-over text: ""
[0:00:44]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: – isMouseOverText(): False
[0:00:45]: ERROR: Chop_Tree: Failed to find mouseOverText
[0:00:45]: – isMouseOverText()
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:45]: —- Current mouse-over text: ""
[0:00:46]: —- Current mouse-over text: ""
[0:00:46]: —- Current mouse-over text: ""
[0:00:46]: – isMouseOverText(): False
[0:00:46]: ERROR: Chop_Tree: Failed to find mouseOverText
[0:00:46]: – isMouseOverText()
[0:00:46]: —- Current mouse-over text: ""
[0:00:46]: —- Current mouse-over text: ""
[0:00:46]: —- Current mouse-over text: ""
[0:00:46]: —- Current mouse-over text: ""
[0:00:46]: —- Current mouse-over text: ""
[0:00:46]: —- Current mouse-over text: ""
[0:00:46]: —- Current mouse-over text: ""
[0:00:46]: —- Current mouse-over text: ""
[0:00:46]: —- Current mouse-over text: ""
[0:00:46]: – isMouseOverText(): False
[0:00:46]: ERROR: Chop_Tree: Failed to find mouseOverText

he only takes one tree and doesnt bank when full

Coh3n

2014-07-21 08:11:28

@Nicodemus; Make sure your SRL is updated, and that you have mouse-over text enabled in your settings.

Marius90

2014-07-22 12:09:05

Hello thanks for the script it looks like you spent alot of time on it …but for some reason for me it does not work i haven't played RS for a time … and i see here programing has changed and i don't know how to use Srl-6 …and my old scripts does not work on this new simba …amyway if someone would be willing to help me …this appear in the debugs line

[00:00:18]: —- Setup SRL in 15491ms.
[00:00:18]: – setupSRL(): True
[00:00:18]: – TPlayerArray.setup()
[00:00:18]: —- WARNING: Invalid player name: ***/Display Name
[00:00:18]: – TPlayerArray.setup(): Success
[00:00:18]: Exception in Script: Runtime error: "Access violation" at line 133, column 29
The following bitmaps were not freed: [Minimap Mask, SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (22-07-14 at 07.02.32 PM).txt] has not been freed in the script, freeing it now.

Coh3n

2014-07-22 12:47:21

From: Ionutz900
Hello thanks for the script it looks like you spent alot of time on it …but for some reason for me it does not work i haven't played RS for a time … and i see here programing has changed and i don't know how to use Srl-6 …and my old scripts does not work on this new simba …amyway if someone would be willing to help me …this appear in the debugs line

[00:00:18]: —- Setup SRL in 15491ms.
[00:00:18]: – setupSRL(): True
[00:00:18]: – TPlayerArray.setup()
[00:00:18]: —- WARNING: Invalid player name: **/Display Name
[00:00:18]: – TPlayerArray.setup(): Success
[00:00:18]: Exception in Script: Runtime error: "Access violation" at line 133, column 29
The following bitmaps were not freed: [Minimap Mask, SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (22-07-14 at 07.02.32 PM).txt] has not been freed in the script, freeing it now.

You haven't set up your players properly. I suggest looking at this tutorial.

You also didn't replace your username properly. The "Player's Nickname" and "Display Name" shouldn't be included in that string. You can enter your nickname OR login name OR display name.

Marius90

2014-07-22 14:25:24

They are set up properly other scripts worked with that Player Manager file anyway
I replaced this line
Players.Setup(['Player''s Nickname/Login Name/Display Name'], 'PlayerFileName');
with this line from anoter script players.setup(['charnamehere'], 'playerfilehere');
Has loged in but it doesn;t do anything just stands there with the red dot(cursor) in the same place, like all other scripts that i have tried and i set the grapichs like they said in the tutorial MIN OpenGL Full Brightness
I don't think is from the tollerence so i dont have any more ideas

Edit: That player setup still does not work for me … with the other one works and it does cut trees now and bank i forgot about all the interface and all other staff …my bad

Coh3n

2014-07-23 12:41:49

From: Ionutz900
Players.Setup(['Player''s Nickname/Login Name/Display Name'], 'PlayerFileName');
with this line from anoter script players.setup(['charnamehere'], 'playerfilehere');

That's what I was trying to explain to you. :p

From: Ionutz900

Edit: That player setup still does not work for me … with the other one works and it does cut trees now and bank i forgot about all the interface and all other staff …my bad

I'm confused, is everything working now?

Nicodemus

2014-07-23 17:34:55

From: Coh3n
@Nicodemus; Make sure your SRL is updated, and that you have mouse-over text enabled in your settings.

srl is updated and mouse over text is enabled :/

Coh3n

2014-07-23 22:46:09

From: Nicodemus
srl is updated and mouse over text is enabled :/

When the script moves the mouse to the tree, does the mouse over text appear? Or is the mouse over a part of the tree that isn't clickable?

Marius90

2014-07-24 15:32:02

Yes Cohen it does work very well thank you, i forgot about a few graphic settings

Coh3n

2014-07-24 15:38:49

From: Ionutz900
Yes Cohen it does work very well thank you, i forgot about a few graphic settings

Awesome! :)

jolley222

2014-07-25 01:17:43

I'm sure this is a great script, i'm dying to use it.. But once i get on to SMART it does nothing but sit there. I don't know if i set up the script right

Coh3n

2014-07-25 08:48:55

From: jolley222
I'm sure this is a great script, i'm dying to use it.. But once i get on to SMART it does nothing but sit there. I don't know if i set up the script right

Your graphics aren't set properly.

jolley222

2014-07-25 12:11:23

Could you help? I'm a big newbie when it comes to simba for botting.

Coh3n

2014-07-25 12:59:33

From: jolley222
Could you help? I'm a big newbie when it comes to simba for botting.

There are instructions on how to set your graphics properly in the RS3 setup guide.

masterBB

2014-07-25 13:01:46

@Ionutz900 I removed your runescape name from your post and coh3n his quote. Be careful not to post it on a bottings site ;)

jolley222

2014-07-25 13:35:17

I've set those graphic settings 2 times and I have double checked them. Still nothing happens.

Nicodemus

2014-07-25 16:45:16

From: Coh3n
When the script moves the mouse to the tree, does the mouse over text appear? Or is the mouse over a part of the tree that isn't clickable?

the text appears when the mouse goes over the tree. and when the tree is cut off , the mouse hovers over the bridge and fence ( see yellow squares)

[ATTACH=CONFIG]23661[/ATTACH]

Coh3n

2014-07-25 17:53:49

From: jolley222
I've set those graphic settings 2 times and I have double checked them. Still nothing happens.

Can you post what shows in the debug box?

From: Nicodemus
the text appears when the mouse goes over the tree. and when the tree is cut off , the mouse hovers over the bridge and fence ( see yellow squares)

[ATTACH=CONFIG]23661[/ATTACH]

Oh I see. That's because the color of the fence and bridge are similar colors to the trees. It probably doesn't help that I haven't updated the tree colors in a very very long time.

I'll add that to my to-do list.

jolley222

2014-07-25 19:07:55

I got the script to work, but it gets buggy when it tries to bank sometimes

Coh3n

2014-07-25 23:59:44

From: jolley222
I got the script to work, but it gets buggy when it tries to bank sometimes

You need to be more descriptive than that.

Nicodemus

2014-07-26 17:17:00

Oh I see. That's because the color of the fence and bridge are similar colors to the trees. It probably doesn't help that I haven't updated the tree colors in a very very long time.

I'll add that to my to-do list.

so i can't use the script correctly ? o:

Coh3n

2014-07-26 20:03:21

From: Nicodemus
so i can't use the script correctly ? o:

Probably not, unless you change the colors yourself.

theorange

2014-07-26 20:17:26

0:00:28]: Exception in Script: Runtime error: "Access violation" at line 133, column 29
The following bitmaps were not freed: [Minimap Mask, SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (26-07-14 at 08.14.52 PM).txt] has not been freed in the script, freeing it now.

Coh3n

2014-07-26 22:15:46

From: theorange
0:00:28]: Exception in Script: Runtime error: "Access violation" at line 133, column 29
The following bitmaps were not freed: [Minimap Mask, SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (26-07-14 at 08.14.52 PM).txt] has not been freed in the script, freeing it now.

You likely didn't setup your players right. Probably a misspelled username (they are case-sensitive).

theorange

2014-07-26 23:49:04

From: Coh3n
You likely didn't setup your players right. Probably a misspelled username (they are case-sensitive).

Yeah you are right, I must have misspelled something, it works, i'll post a report in a bit

Nicodemus

2014-07-27 17:25:05

From: Coh3n
Probably not, unless you change the colors yourself.

hey i fixed the problem thanks to the mayor (i had a problem with his script too) and now yours works flawless too :D

ty!

theorange

2014-07-30 14:22:21

Works very well, however once a full inventory of willow logs were cut, it would not drop the logs nor bank them, and just kept click on willows ignoring the system messsages that inventory was full

Coh3n

2014-07-30 19:15:26

From: theorange
Works very well, however once a full inventory of willow logs were cut, it would not drop the logs nor bank them, and just kept click on willows ignoring the system messsages that inventory was full

It's not meant to drop logs, so that will never happen.

When this happens, is the inventory open?

theorange

2014-07-30 20:04:20

From: Coh3n
It's not meant to drop logs, so that will never happen.

When this happens, is the inventory open?

Inventory is open, when inventory is full, it doesn't bank, it just keeps clicking on willows

Coh3n

2014-07-31 08:52:23

From: theorange
Inventory is open, when inventory is full, it doesn't bank, it just keeps clicking on willows

Can you post a bug report here, please? It sounds like there's a bug with SRL's TRSBackpack.isFull() function. You can mention that I asked you to report the bug.

Novite666

2014-07-31 09:59:17

Needed a script like this, thanks bro.

hopesluck

2014-07-31 16:23:12

coh3n is a scripting madman. great outcome on this script =) thanks

barbosaa

2014-07-31 18:07:39

thx man, nice job

fedeed

2014-08-07 09:32:42

hi,

This is the first time im trying to bot. When i try to run the script, my client opens, then the script just stops. In the box below it just says ran for 3 seconds and i get some information that i cut 0 logs, etc…

can anyone tell me what im doing wrong?

Coh3n

2014-08-07 13:18:40

From: fedeed
hi,

This is the first time im trying to bot. When i try to run the script, my client opens, then the script just stops. In the box below it just says ran for 3 seconds and i get some information that i cut 0 logs, etc…

can anyone tell me what im doing wrong?

Yeah you didn't setup your graphics properly. Follow this guide: https://villavu.com/forum/forumdisplay.php?f=351

fedeed

2014-08-07 15:20:35

I followed your advice but the problem is still there, i added some screenshots with my graphics configuration. I think i did it wright, anyways already thanks for your quick reply

[ATTACH=CONFIG]23750[/ATTACH][ATTACH=CONFIG]23751[/ATTACH][ATTACH=CONFIG]23752[/ATTACH][ATTACH=CONFIG]23753[/ATTACH]

Coh3n

2014-08-07 18:33:24

From: fedeed
I followed your advice but the problem is still there, i added some screenshots with my graphics configuration. I think i did it wright, anyways already thanks for your quick reply

[ATTACH=CONFIG]23750[/ATTACH][ATTACH=CONFIG]23751[/ATTACH][ATTACH=CONFIG]23752[/ATTACH][ATTACH=CONFIG]23753[/ATTACH]

You didn't attach the images properly. Try uninstalling Simba, restarting your computer, then reinstalling. I was just PMing with another person and that worked for them; although, I'm not sure why.

lanadekat

2014-08-11 12:55:50

are the collors updated ?
Or is it working fine?

I'm currently leveling my account to 30 wc to let this lvl me to 99 :D

edit: it is working great so far! Thanks a lot for the script!
I will post what happens to the account lvl 99/ or ban.
Banking is a bit bugged, but I don't really care.
It banks when it has this inventory:
[ATTACH=CONFIG]23784[/ATTACH]

The Mayor

2014-08-11 16:51:04

From: lanadekat
are the collors updated ?
Or is it working fine?

I'm currently leveling my account to 30 wc to let this lvl me to 99 :D

edit: it is working great so far! Thanks a lot for the script!
I will post what happens to the account lvl 99/ or ban.
Banking is a bit bugged, but I don't really care.
It banks when it has this inventory:
[ATTACH=CONFIG]23784[/ATTACH]

Hmm, I think this happened on one of my scripts too. The update last night may have threw off the backpack slots or something.

lanadekat

2014-08-11 17:55:45

From: The Mayor
Hmm, I think this happened on one of my scripts too. The update last night may have threw off the backpack slots or something.

update last night, lol
The only update I remember is this morning, here in belgium , it's currently 23:55 here ( 11:55 PM ) So I think it's the same update you're talking about.

Coh3n

2014-08-11 20:20:01

From: lanadekat
are the collors updated ?
Or is it working fine?

I'm currently leveling my account to 30 wc to let this lvl me to 99 :D

edit: it is working great so far! Thanks a lot for the script!
I will post what happens to the account lvl 99/ or ban.
Banking is a bit bugged, but I don't really care.
It banks when it has this inventory:
[ATTACH=CONFIG]23784[/ATTACH]

From: The Mayor
Hmm, I think this happened on one of my scripts too. The update last night may have threw off the backpack slots or something.

Yeah, sounds like a tabBackpack.isFull() issue.

The Mayor

2014-08-12 01:34:04

From: Coh3n
Yeah, sounds like a tabBackpack.isFull() issue.

Slots are a few px out but it shouldn't be causing problems. Black colour still exists.

Coh3n

2014-08-12 08:01:15

From: The Mayor
Slots are a few px out but it shouldn't be causing problems. Black colour still exists.

Interesting. The inventory is kind of dark, I wonder if it's finding the black outline on one of the blue colors. IsItemIn() does use a tolerance, albeit it is only 1. That's the only thing I can think of.

fedeed

2014-08-12 08:22:01

did anyone else notice that since the rs update, the script gets stuck often at the bank guard? or is it just me?

pipos1

2014-08-13 01:08:04

can any 1 help me pleasy i cant figure out how the character login work :(

lanadekat

2014-08-14 08:56:55

From: fedeed
did anyone else notice that since the rs update, the script gets stuck often at the bank guard? or is it just me?

Banking works fine for me, other then that it banks when inventory not being full like mentioned above.

God Elohim

2014-08-14 13:49:57

I'm having this error,is it just me?

"Exception in Script: Unknown compiler directives at 11:3"

I'm trying to learn the basics i've read some tutorials but my scripts won't run tho

PS: What is the regular base of the runescape screen to run all this scripts? Client + full screen i assume?
"So it's centrilized for everyone"

lanadekat

2014-08-14 19:11:35

From: God Elohim
I'm having this error,is it just me?

"Exception in Script: Unknown compiler directives at 11:3"

I'm trying to learn the basics i've read some tutorials but my scripts won't run tho

PS: What is the regular base of the runescape screen to run all this scripts? Client + full screen i assume?
"So it's centrilized for everyone"

Please read this:
https://villavu.com/forum/showthread.php?t=47714

@coh3n:
for what reasons does the script logout? Sometimes it logs out.
I have max logs to do at 99999999 and breaks to false and break_after to 9999999

Coh3n

2014-08-15 14:34:32

From: lanadekat
Please read this:
https://villavu.com/forum/showthread.php?t=47714

@coh3n:
for what reasons does the script logout? Sometimes it logs out.
I have max logs to do at 99999999 and breaks to false and break_after to 9999999

I'm not sure, what does the debug say when it logs out?

lanadekat

2014-08-16 07:29:12

From: Coh3n
I'm not sure, what does the debug say when it logs out?

I tried to check to debug a few times , but I can't find any error/ trying to log out message.
Just the normal looking for tree spam.
I don't think it's something with my setup cus I just had Ikaramjafisher running for 20 hours.
sometimes the script just stops and sometimes it opens the menu u can open with esc and clicks logout.

Dr Clemsip

2014-08-16 20:29:46

Have the small problem of not being able bank the logs, every thing else seems to be working well though.
This is what it says in the debug before logging out then back in again only to repeat its self.

[00:01:34]: ------ Found lobby screen
[00:01:34]: ---- TPlayer.loginToLobby(): True
[00:01:34]: ------ TRSLobby.findPlayButton(): result = True
[00:02:06]: ------ TRSActionBar.__findButton(): Found the actionbar button @ {X = 566, Y = 397}
[00:02:06]: ------ TRSActionBar.__find(): result = true (height = 75)
[00:02:06]: ------ Dynamic interfaces have been set.
[00:02:06]: ---- Logged in: Toss
[00:02:06]: ------ TRSGameTab.__initTabs(): Setup gametab properties
[00:02:07]: -- TPlayer.login(): True
[00:02:07]: -- TRSMinimap._getSymbolColor()
[00:02:07]: ---- Loaded symbol: Fishing Spot
[00:02:07]: ---- Found symbol bitmap 42
[00:02:07]: -- TRSMinimap._getSymbolColor(): -1
[00:02:07]: PLAYER: Find_PlayerLocation: Toss: Location = Bank
[00:02:13]: SUCCESS: Walk_ToLoc: Walked to location: Willows
[00:02:13]: -- TRSMinimap._getSymbolColor()
[00:02:13]: ---- Loaded symbol: Bank
[00:02:14]: ---- Found symbol bitmap 73
[00:02:14]: ---- Found Bank symbol at {X = 685, Y = 110}
[00:02:14]: -- TRSMinimap._getSymbolColor(): 3390179
[00:02:18]: SUCCESS: Walk_ToLoc: Walked to location: Bank
[00:02:18]: -- TRSMainscreen.findObject()
[00:02:18]: ---- Colors found: 1
[00:02:18]: ---- Possible objects found: 0
[00:02:18]: -- TRSMainscreen.findObject(): False
[00:02:18]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:19]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:19]: -- TRSMainscreen.findObject()
[00:02:19]: ---- Colors found: 2
[00:02:19]: ---- Possible objects found: 0
[00:02:19]: -- TRSMainscreen.findObject(): False
[00:02:19]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:19]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:19]: -- TRSMainscreen.findObject()
[00:02:19]: ---- Colors found: 3
[00:02:19]: ---- Possible objects found: 0
[00:02:19]: -- TRSMainscreen.findObject(): False
[00:02:19]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:19]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:19]: -- TRSMainscreen.findObject()
[00:02:19]: ---- Colors found: 2
[00:02:19]: ---- Possible objects found: 0
[00:02:19]: -- TRSMainscreen.findObject(): False
[00:02:19]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:19]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:19]: -- TRSMainscreen.findObject()
[00:02:19]: ---- Colors found: 2
[00:02:19]: ---- Possible objects found: 0
[00:02:19]: -- TRSMainscreen.findObject(): False
[00:02:19]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:19]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:20]: -- TRSMainscreen.findObject()
[00:02:20]: ---- Colors found: 1
[00:02:20]: ---- Possible objects found: 0
[00:02:20]: -- TRSMainscreen.findObject(): False
[00:02:20]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:20]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:20]: -- TRSMainscreen.findObject()
[00:02:20]: ---- Colors found: 1
[00:02:20]: ---- Possible objects found: 0
[00:02:20]: -- TRSMainscreen.findObject(): False
[00:02:20]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:20]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:20]: -- TRSMainscreen.findObject()
[00:02:20]: ---- Colors found: 1
[00:02:20]: ---- Possible objects found: 0
[00:02:20]: -- TRSMainscreen.findObject(): False
[00:02:20]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:20]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:20]: -- TRSMainscreen.findObject()
[00:02:20]: ---- No colors found
[00:02:20]: -- TRSMainscreen.findObject(): False
[00:02:20]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:20]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:21]: -- TRSMainscreen.findObject()
[00:02:21]: ---- Colors found: 3
[00:02:21]: ---- Possible objects found: 0
[00:02:21]: -- TRSMainscreen.findObject(): False
[00:02:21]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:21]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:21]: -- TRSMainscreen.findObject()
[00:02:21]: ---- Colors found: 2
[00:02:21]: ---- Possible objects found: 0
[00:02:21]: -- TRSMainscreen.findObject(): False
[00:02:21]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:21]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:21]: -- TRSMainscreen.findObject()
[00:02:21]: ---- Colors found: 2
[00:02:21]: ---- Possible objects found: 0
[00:02:21]: -- TRSMainscreen.findObject(): False
[00:02:21]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:21]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:21]: -- TRSMainscreen.findObject()
[00:02:21]: ---- Colors found: 2
[00:02:21]: ---- Possible objects found: 0
[00:02:22]: -- TRSMainscreen.findObject(): False
[00:02:22]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:22]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:22]: -- TRSMainscreen.findObject()
[00:02:22]: ---- Colors found: 2
[00:02:22]: ---- Possible objects found: 0
[00:02:22]: -- TRSMainscreen.findObject(): False
[00:02:22]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:22]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:22]: -- TRSMainscreen.findObject()
[00:02:22]: ---- Colors found: 6
[00:02:22]: ---- Possible objects found: 0
[00:02:22]: -- TRSMainscreen.findObject(): False
[00:02:22]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:22]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:22]: -- TRSMainscreen.findObject()
[00:02:22]: ---- Colors found: 6
[00:02:22]: ---- Possible objects found: 0
[00:02:22]: -- TRSMainscreen.findObject(): False
[00:02:22]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:22]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:23]: -- TRSMainscreen.findObject()
[00:02:23]: ---- Colors found: 5
[00:02:23]: ---- Possible objects found: 0
[00:02:23]: -- TRSMainscreen.findObject(): False
[00:02:23]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:23]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:23]: -- TRSMainscreen.findObject()
[00:02:23]: ---- Colors found: 5
[00:02:23]: ---- Possible objects found: 0
[00:02:23]: -- TRSMainscreen.findObject(): False
[00:02:23]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:23]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:23]: -- TRSMainscreen.findObject()
[00:02:23]: ---- Colors found: 5
[00:02:23]: ---- Possible objects found: 0
[00:02:23]: -- TRSMainscreen.findObject(): False
[00:02:23]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:23]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:23]: -- TRSMainscreen.findObject()
[00:02:23]: ---- Colors found: 6
[00:02:23]: ---- Possible objects found: 0
[00:02:23]: -- TRSMainscreen.findObject(): False
[00:02:23]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:23]: -- TRSMinimap._getSymbolColor()
[00:02:23]: ---- Loaded symbol: Bank
[00:02:24]: ---- Found symbol bitmap 73
[00:02:24]: ---- Found Bank symbol at {X = 697, Y = 106}
[00:02:24]: -- TRSMinimap._getSymbolColor(): 3390179
[00:02:24]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[00:02:26]: -- TRSMainscreen.findObject()
[00:02:26]: ---- Colors found: 4
[00:02:26]: ---- Possible objects found: 0
[00:02:26]: -- TRSMainscreen.findObject(): False
[00:02:26]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:26]: -- TRSMinimap._getSymbolColor()
[00:02:26]: ---- Loaded symbol: Bank
[00:02:26]: ---- Found symbol bitmap 73
[00:02:26]: ---- Found Bank symbol at {X = 692, Y = 106}
[00:02:26]: -- TRSMinimap._getSymbolColor(): 3323615
[00:02:26]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[00:02:28]: -- TRSMainscreen.findObject()
[00:02:28]: ---- Colors found: 38
[00:02:28]: ---- Possible objects found: 0
[00:02:28]: -- TRSMainscreen.findObject(): False
[00:02:28]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:28]: -- TRSMinimap._getSymbolColor()
[00:02:28]: ---- Loaded symbol: Bank
[00:02:28]: ---- Found symbol bitmap 73
[00:02:28]: ---- Found Bank symbol at {X = 685, Y = 106}
[00:02:28]: -- TRSMinimap._getSymbolColor(): 3390179
[00:02:28]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[00:02:29]: DETAIL: Bank_Logs: Failed to open bank after 40 tries
[00:02:29]: -- TPlayer.logout()
[00:02:36]: tesseractGetText(): Bitmap is is too small (190, 1)
[00:02:40]: ---- Waiting for login screen...
[00:02:41]: ---- Waiting for login screen...
[00:02:42]: ---- Waiting for login screen...
[00:02:43]: ---- Waiting for login screen...
[00:02:44]: -- TPlayer.logout(): True
[00:02:44]: ---- Switching to player 0 (Toss)
[00:02:44]: -- TPlayer.login()
[00:02:44]: ---- TPlayer.loginToLobby()

Dr Clemsip

2014-08-16 20:35:04

Have the small problem of not being able bank the logs, every thing else seems to be working well though.
This is what it says in the debug before logging out then back in again only to repeat its self.

[00:01:34]: ------ Found lobby screen
[00:01:34]: ---- TPlayer.loginToLobby(): True
[00:01:34]: ------ TRSLobby.findPlayButton(): result = True
[00:02:06]: ------ TRSActionBar.__findButton(): Found the actionbar button @ {X = 566, Y = 397}
[00:02:06]: ------ TRSActionBar.__find(): result = true (height = 75)
[00:02:06]: ------ Dynamic interfaces have been set.
[00:02:06]: ---- Logged in: Toss
[00:02:06]: ------ TRSGameTab.__initTabs(): Setup gametab properties
[00:02:07]: -- TPlayer.login(): True
[00:02:07]: -- TRSMinimap._getSymbolColor()
[00:02:07]: ---- Loaded symbol: Fishing Spot
[00:02:07]: ---- Found symbol bitmap 42
[00:02:07]: -- TRSMinimap._getSymbolColor(): -1
[00:02:07]: PLAYER: Find_PlayerLocation: Toss: Location = Bank
[00:02:13]: SUCCESS: Walk_ToLoc: Walked to location: Willows
[00:02:13]: -- TRSMinimap._getSymbolColor()
[00:02:13]: ---- Loaded symbol: Bank
[00:02:14]: ---- Found symbol bitmap 73
[00:02:14]: ---- Found Bank symbol at {X = 685, Y = 110}
[00:02:14]: -- TRSMinimap._getSymbolColor(): 3390179
[00:02:18]: SUCCESS: Walk_ToLoc: Walked to location: Bank
[00:02:18]: -- TRSMainscreen.findObject()
[00:02:18]: ---- Colors found: 1
[00:02:18]: ---- Possible objects found: 0
[00:02:18]: -- TRSMainscreen.findObject(): False
[00:02:18]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:19]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:19]: -- TRSMainscreen.findObject()
[00:02:19]: ---- Colors found: 2
[00:02:19]: ---- Possible objects found: 0
[00:02:19]: -- TRSMainscreen.findObject(): False
[00:02:19]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:19]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:19]: -- TRSMainscreen.findObject()
[00:02:19]: ---- Colors found: 3
[00:02:19]: ---- Possible objects found: 0
[00:02:19]: -- TRSMainscreen.findObject(): False
[00:02:19]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:19]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:19]: -- TRSMainscreen.findObject()
[00:02:19]: ---- Colors found: 2
[00:02:19]: ---- Possible objects found: 0
[00:02:19]: -- TRSMainscreen.findObject(): False
[00:02:19]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:19]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:19]: -- TRSMainscreen.findObject()
[00:02:19]: ---- Colors found: 2
[00:02:19]: ---- Possible objects found: 0
[00:02:19]: -- TRSMainscreen.findObject(): False
[00:02:19]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:19]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:20]: -- TRSMainscreen.findObject()
[00:02:20]: ---- Colors found: 1
[00:02:20]: ---- Possible objects found: 0
[00:02:20]: -- TRSMainscreen.findObject(): False
[00:02:20]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:20]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:20]: -- TRSMainscreen.findObject()
[00:02:20]: ---- Colors found: 1
[00:02:20]: ---- Possible objects found: 0
[00:02:20]: -- TRSMainscreen.findObject(): False
[00:02:20]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:20]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:20]: -- TRSMainscreen.findObject()
[00:02:20]: ---- Colors found: 1
[00:02:20]: ---- Possible objects found: 0
[00:02:20]: -- TRSMainscreen.findObject(): False
[00:02:20]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:20]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:20]: -- TRSMainscreen.findObject()
[00:02:20]: ---- No colors found
[00:02:20]: -- TRSMainscreen.findObject(): False
[00:02:20]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:20]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:21]: -- TRSMainscreen.findObject()
[00:02:21]: ---- Colors found: 3
[00:02:21]: ---- Possible objects found: 0
[00:02:21]: -- TRSMainscreen.findObject(): False
[00:02:21]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:21]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:21]: -- TRSMainscreen.findObject()
[00:02:21]: ---- Colors found: 2
[00:02:21]: ---- Possible objects found: 0
[00:02:21]: -- TRSMainscreen.findObject(): False
[00:02:21]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:21]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:21]: -- TRSMainscreen.findObject()
[00:02:21]: ---- Colors found: 2
[00:02:21]: ---- Possible objects found: 0
[00:02:21]: -- TRSMainscreen.findObject(): False
[00:02:21]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:21]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:21]: -- TRSMainscreen.findObject()
[00:02:21]: ---- Colors found: 2
[00:02:21]: ---- Possible objects found: 0
[00:02:22]: -- TRSMainscreen.findObject(): False
[00:02:22]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:22]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:22]: -- TRSMainscreen.findObject()
[00:02:22]: ---- Colors found: 2
[00:02:22]: ---- Possible objects found: 0
[00:02:22]: -- TRSMainscreen.findObject(): False
[00:02:22]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:22]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:22]: -- TRSMainscreen.findObject()
[00:02:22]: ---- Colors found: 6
[00:02:22]: ---- Possible objects found: 0
[00:02:22]: -- TRSMainscreen.findObject(): False
[00:02:22]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:22]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:22]: -- TRSMainscreen.findObject()
[00:02:22]: ---- Colors found: 6
[00:02:22]: ---- Possible objects found: 0
[00:02:22]: -- TRSMainscreen.findObject(): False
[00:02:22]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:22]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:23]: -- TRSMainscreen.findObject()
[00:02:23]: ---- Colors found: 5
[00:02:23]: ---- Possible objects found: 0
[00:02:23]: -- TRSMainscreen.findObject(): False
[00:02:23]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:23]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:23]: -- TRSMainscreen.findObject()
[00:02:23]: ---- Colors found: 5
[00:02:23]: ---- Possible objects found: 0
[00:02:23]: -- TRSMainscreen.findObject(): False
[00:02:23]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:23]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:23]: -- TRSMainscreen.findObject()
[00:02:23]: ---- Colors found: 5
[00:02:23]: ---- Possible objects found: 0
[00:02:23]: -- TRSMainscreen.findObject(): False
[00:02:23]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:23]: ERROR: Bank_Logs: Failed to find bank screen
[00:02:23]: -- TRSMainscreen.findObject()
[00:02:23]: ---- Colors found: 6
[00:02:23]: ---- Possible objects found: 0
[00:02:23]: -- TRSMainscreen.findObject(): False
[00:02:23]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:23]: -- TRSMinimap._getSymbolColor()
[00:02:23]: ---- Loaded symbol: Bank
[00:02:24]: ---- Found symbol bitmap 73
[00:02:24]: ---- Found Bank symbol at {X = 697, Y = 106}
[00:02:24]: -- TRSMinimap._getSymbolColor(): 3390179
[00:02:24]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[00:02:26]: -- TRSMainscreen.findObject()
[00:02:26]: ---- Colors found: 4
[00:02:26]: ---- Possible objects found: 0
[00:02:26]: -- TRSMainscreen.findObject(): False
[00:02:26]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:26]: -- TRSMinimap._getSymbolColor()
[00:02:26]: ---- Loaded symbol: Bank
[00:02:26]: ---- Found symbol bitmap 73
[00:02:26]: ---- Found Bank symbol at {X = 692, Y = 106}
[00:02:26]: -- TRSMinimap._getSymbolColor(): 3323615
[00:02:26]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[00:02:28]: -- TRSMainscreen.findObject()
[00:02:28]: ---- Colors found: 38
[00:02:28]: ---- Possible objects found: 0
[00:02:28]: -- TRSMainscreen.findObject(): False
[00:02:28]: ERROR: Bank_Logs: Failed to open bank, retrying...
[00:02:28]: -- TRSMinimap._getSymbolColor()
[00:02:28]: ---- Loaded symbol: Bank
[00:02:28]: ---- Found symbol bitmap 73
[00:02:28]: ---- Found Bank symbol at {X = 685, Y = 106}
[00:02:28]: -- TRSMinimap._getSymbolColor(): 3390179
[00:02:28]: SUCCESS: Bank_Logs: Found bank symbol! Relocating...
[00:02:29]: DETAIL: Bank_Logs: Failed to open bank after 40 tries
[00:02:29]: -- TPlayer.logout()
[00:02:36]: tesseractGetText(): Bitmap is is too small (190, 1)
[00:02:40]: ---- Waiting for login screen...
[00:02:41]: ---- Waiting for login screen...
[00:02:42]: ---- Waiting for login screen...
[00:02:43]: ---- Waiting for login screen...
[00:02:44]: -- TPlayer.logout(): True
[00:02:44]: ---- Switching to player 0 (Toss)
[00:02:44]: -- TPlayer.login()
[00:02:44]: ---- TPlayer.loginToLobby()

Tuskyman

2014-08-17 20:48:31

How does the login system in this work? so new to all this so sorry for the nooby question.

Coh3n

2014-08-19 07:55:58

From: Dr Clemsip
Have the small problem of not being able bank the logs, every thing else seems to be working well though.
This is what it says in the debug before logging out then back in again only to repeat its self.

Looks like it's not finding the bankers. When this happens is the player actually in the bank and are the bankers visible?

From: Tuskyman
How does the login system in this work? so new to all this so sorry for the nooby question.

It uses SRL's login methods. It works like every other script.

Tuskyman

2014-08-19 13:39:08

I realised what I was doing wrong straight after, I loaded simba via the script and not by itself so the SRL plugin was not loading :P

Dr Clemsip

2014-08-19 18:54:59

From: Coh3n
Looks like it's not finding the bankers. When this happens is the player actually in the bank and are the bankers visible?

Yeah it stops just out side of the bank on the left-hand side, I believe its two bankers that are visible. I imagine its most probably a lag issue on my end. Internet is fast but my pc only has 2gb ram so struggle's to keep up sometimes.

Thanks for the reply.

Coh3n

2014-08-20 10:52:15

From: Dr Clemsip
Yeah it stops just out side of the bank on the left-hand side, I believe its two bankers that are visible. I imagine its most probably a lag issue on my end. Internet is fast but my pc only has 2gb ram so struggle's to keep up sometimes.

Thanks for the reply.

Actually, I think this script finds the bank booth. Is the booth visible from that area?

vldmrbg

2014-09-02 13:36:04

Hey guys im new to this whole scriping/botting part of runescape 3 could you please give me a link for a tutorial on how to setup this woodcutting scriping so i could train my woodcutting level, or at least a link for the newest release to this script because i think this one does not work or im not setting it up right consider ive done everything from the setup simba tutorial

3Garrett3

2014-09-02 13:40:24

From: vldmrbg
Hey guys im new to this whole scriping/botting part of runescape 3 could you please give me a link for a tutorial on how to setup this woodcutting scriping so i could train my woodcutting level, or at least a link for the newest release to this script because i think this one does not work or im not setting it up right consider ive done everything from the setup simba tutorial

If you've followed Coh3n's Guide for setting up Simba and SRL then you should be on the right track. I heard that there was an update yesterday that fudged a few things in SRL though. If you've followed the guide and are sure that you've done everything right, you can try using the search function at the top of the page for your issue. Hopefully this will help you if there's something not set up quite right.

If after all that, the script still won't work properly, you can paste the Simba output here so that Coh3n can see if he needs to update his script. I know I used it two days ago and it worked, but like I said an RS update can sometimes take a couple days for everyone to find the little things that need fixing. There's a lot of code and only so many devs to work on it.

LameLoser

2014-09-03 11:51:35

From: Coh3n
Actually, I think this script finds the bank booth. Is the booth visible from that area?

Yes, the booth is visible. I have the same issues as well. You stop right outside the bank directly north of the counter, then run back and forth in the area in front of the doors. Eventually it makes you run back to the willows and then the same thing repeats. I've had mine pop open the esc menu a few times and I ended the program from there.

edit: for clarity

Coh3n

2014-09-03 18:06:36

From: vldmrbg
Hey guys im new to this whole scriping/botting part of runescape 3 could you please give me a link for a tutorial on how to setup this woodcutting scriping so i could train my woodcutting level, or at least a link for the newest release to this script because i think this one does not work or im not setting it up right consider ive done everything from the setup simba tutorial

From: LameLoser
Yes, the booth is visible. I have the same issues as well. You stop right outside the bank directly north of the counter, then run back and forth in the area in front of the doors. Eventually it makes you run back to the willows and then the same thing repeats. I've had mine pop open the esc menu a few times and I ended the program from there.

edit: for clarity

It sounds like the script might be outdated. I received another PM about not finding the bank booths. If I get another confirmation I'll mark this script as outdated and update it when I have time.

From: 3Garrett3
If you've followed Coh3n's Guide for setting up Simba and SRL then you should be on the right track. I heard that there was an update yesterday that fudged a few things in SRL though. If you've followed the guide and are sure that you've done everything right, you can try using the search function at the top of the page for your issue. Hopefully this will help you if there's something not set up quite right.

If after all that, the script still won't work properly, you can paste the Simba output here so that Coh3n can see if he needs to update his script. I know I used it two days ago and it worked, but like I said an RS update can sometimes take a couple days for everyone to find the little things that need fixing. There's a lot of code and only so many devs to work on it.

Whoah! Haven't seen you around in a while! Hope everything is going well. :)

Note

2014-09-05 04:27:47

Would someone be kind enough to fix the banking problem please!

XrTw

2014-09-07 01:59:50

please help, im having this error gyazo.com/7e9a338c5125a18668a8674f6e776a71

Coh3n

2014-09-07 11:14:45

From: XrTw
please help, im having this error gyazo.com/7e9a338c5125a18668a8674f6e776a71

That isn't an error. What happens when SMART loads?

XrTw

2014-09-07 13:38:53

From: Coh3n
That isn't an error. What happens when SMART loads?

its okay, its load, but script dont do anything. could you support me via skype?

Coh3n

2014-09-07 13:47:55

From: XrTw
its okay, its load, but script dont do anything. could you support me via skype?

Sorry, I don't do that. You need to read this page.

Coh3n

2014-09-07 14:36:28

Script updated. A could things:

The banking issue was in SRL, which I've fixed. The script should work when your SRL updates.
The latest version of the script (Rev. 81) has updated Willow tree colors. This should improve accuracy and the script should no longer find the bridge west of the bank as another tree.

Enjoy,
Coh3n

Spaceblow

2014-09-08 09:20:53

From: Coh3n
The script should work when your SRL updates.

Do you have any idea when SRL is going to get an update? I want to try out your script but unfortunately, it doesn't bank very well so that's why I'm asking you this. Thanks in advance. :)

This is the banking issue you're talking about, right?

[0:00:24]: ---- isMouseOverText()
[0:00:24]: ------ Current mouse-over text: "Bank Counter"
[0:00:24]: ------ Found "Bank" in mouse-over string: "Bank Counter"
[0:00:24]: ---- isMouseOverText(): True
[0:00:24]: ---- We found correct mouse-over text
[0:00:35]: ---- Bankscreen or pinscreen never opened
[0:00:35]: ---- isMouseOverText()
[0:00:35]: ------ Current mouse-over text: ""
[0:00:35]: ------ Current mouse-over text: "Withdraw-1 Yew shortL'ow 0gggBB i # st AFFgrgFX i @ze AggB i ArrBV TXFB i RgnBB4 gFBB4 i Fgs$ IBvBI i gg"
[0:00:35]: ------ Current mouse-over text: "Withdraw-1 Yew shortL'ow 0gggBB i # st AFFgrgFX i @ze AggB i ArrBV TXFB i RgnBB4 gFBB4 i Fgs$ IBvBI i gg"
[0:00:35]: ------ Current mouse-over text: "Withdraw-1 Yew shortL'ow 0gggBB i # st AFFgrgFX i @ze AggB i ArrBV TXFB i RgnBB4 gFBB4 i Fgs$ IBvBI i gg"
[0:00:35]: ------ Current mouse-over text: "Withdraw-1 Yew shortL'ow 0gggBB i # st AFFgrgFX i @ze AggB i ArrBV TXFB i RgnBB4 gFBB4 i Fgs$ IBvBI i gg"
[0:00:35]: ---- isMouseOverText(): False
[0:00:35]: ---- Mouse-over text wasn't correct
[0:00:35]: -- TRSBankscreen.__openNPC(): result = False
[0:00:35]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:00:36]: ERROR: Bank_Logs: Failed to find bank screen
[0:00:36]: -- TRSGameTabs.openTab(2)
[0:00:36]: ---- Opening tab via gametab navigation bar

Coh3n

2014-09-08 10:32:26

From: Spaceblow
Do you have any idea when SRL is going to get an update? I want to try out your script but unfortunately, it doesn't bank very well so that's why I'm asking you this. Thanks in advance. :)

This is the banking issue you're talking about, right?

[0:00:24]: ---- isMouseOverText()
[0:00:24]: ------ Current mouse-over text: "Bank Counter"
[0:00:24]: ------ Found "Bank" in mouse-over string: "Bank Counter"
[0:00:24]: ---- isMouseOverText(): True
[0:00:24]: ---- We found correct mouse-over text
[0:00:35]: ---- Bankscreen or pinscreen never opened
[0:00:35]: ---- isMouseOverText()
[0:00:35]: ------ Current mouse-over text: ""
[0:00:35]: ------ Current mouse-over text: "Withdraw-1 Yew shortL'ow 0gggBB i # st AFFgrgFX i @ze AggB i ArrBV TXFB i RgnBB4 gFBB4 i Fgs$ IBvBI i gg"
[0:00:35]: ------ Current mouse-over text: "Withdraw-1 Yew shortL'ow 0gggBB i # st AFFgrgFX i @ze AggB i ArrBV TXFB i RgnBB4 gFBB4 i Fgs$ IBvBI i gg"
[0:00:35]: ------ Current mouse-over text: "Withdraw-1 Yew shortL'ow 0gggBB i # st AFFgrgFX i @ze AggB i ArrBV TXFB i RgnBB4 gFBB4 i Fgs$ IBvBI i gg"
[0:00:35]: ------ Current mouse-over text: "Withdraw-1 Yew shortL'ow 0gggBB i # st AFFgrgFX i @ze AggB i ArrBV TXFB i RgnBB4 gFBB4 i Fgs$ IBvBI i gg"
[0:00:35]: ---- isMouseOverText(): False
[0:00:35]: ---- Mouse-over text wasn't correct
[0:00:35]: -- TRSBankscreen.__openNPC(): result = False
[0:00:35]: ERROR: Bank_Logs: Failed to open bank, retrying...
[0:00:36]: ERROR: Bank_Logs: Failed to find bank screen
[0:00:36]: -- TRSGameTabs.openTab(2)
[0:00:36]: ---- Opening tab via gametab navigation bar

No, that's a different problem. What I updated was the finding of the bank. According to that debug it's clicking the bank, but it's never detecting that it's open. Make sure your graphics are set properly. Sometimes the bank screen can move a few pixels, which messes up the finder.

The bankscreen detection is working. Unless there was an update since last night that broke it.

Spaceblow

2014-09-08 11:44:37

From: Coh3n
No, that's a different problem. What I updated was the finding of the bank. According to that debug it's clicking the bank, but it's never detecting that it's open. Make sure your graphics are set properly. Sometimes the bank screen can move a few pixels, which messes up the finder.

The bankscreen detection is working. Unless there was an update since last night that broke it.

My graphics are set up perfectly so that can't be the issue. And there was an update a few hours ago, maybe that's why it isn't working as it should be?

Coh3n

2014-09-08 18:59:15

From: Spaceblow
My graphics are set up perfectly so that can't be the issue. And there was an update a few hours ago, maybe that's why it isn't working as it should be?

I just tested and everything worked like it should:


-- TRSBankscreen.__openNPC()
---- TRSMinimap.getDots()
------ Found 22 minimap dots (ID: 0)
---- TRSMinimap.getDots(): [{X = 671, Y = 19}, {X = 671, Y = 23}, {X = 633, Y = 43}, {X = 729, Y = 57}, {X = 698, Y = 58}, {X = 673, Y = 63}, {X = 701, Y = 75}, {X = 631, Y = 80}, {X = 661, Y = 82}, {X = 771, Y = 82}, {X = 645, Y = 93}, {X = 664, Y = 96}, {X = 680, Y = 102}, {X = 680, Y = 106}, {X = 679, Y = 114}, {X = 679, Y = 118}, {X = 746, Y = 129}, {X = 682, Y = 142}, {X = 670, Y = 149}, {X = 743, Y = 154}, {X = 741, Y = 156}, {X = 743, Y = 160}]
---- isMouseOverText()
------ Current mouse-over text: ""
------ Current mouse-over text: ""
------ Current mouse-over text: "Bank Banker"
------ Found "Bank" in mouse-over string: "Bank Banker"
---- isMouseOverText(): True
---- We found correct mouse-over text
---- Bankscreen or pinscreen is open
-- TRSBankscreen.__openNPC(): result = True

Bankscreen is open.

Make sure you reset your interfaces. Like I said before, the bankscreen can be accidentally shifted and needs to be reset. I've seen it happen several times before.

Spaceblow

2014-09-09 06:30:33

From: Coh3n
Make sure you reset your interfaces. Like I said before, the bankscreen can be accidentally shifted and needs to be reset. I've seen it happen several times before.

Yep you were right, something was messed up with the bankscreen, now it banks without any problem although I didn't touch any settings. Is it normal that it detects a lot of the environment as a tree? I understand that a lot of the colours in the area are very similar to each other but could this possibly be fixed by using bonsai's idea?

Note

2014-09-09 08:11:24

Everything seems to work fine though he spends like 4-5seconds at a tree no matter what i change the settings too

Spaceblow

2014-09-09 09:12:06

From: big man 1
Everything seems to work fine though he spends like 4-5seconds at a tree no matter what i change the settings too

Maybe post your settings here so Coh3n could take a look.

Coh3n

2014-09-09 10:29:27

From: Spaceblow
Yep you were right, something was messed up with the bankscreen, now it banks without any problem although I didn't touch any settings. Is it normal that it detects a lot of the environment as a tree? I understand that a lot of the colours in the area are very similar to each other but could this possibly be fixed by using bonsai's idea?

That's an interesting post. It might help with accuracy, I don't know. Unfortunately I don't have the time right now to investigate further.

From: big man 1
Everything seems to work fine though he spends like 4-5seconds at a tree no matter what i change the settings too

Chances are your animation shift setting is off. In your case, it sounds like it's too high.

Note

2014-09-09 20:08:58

I don't know suddenly it has stopped working.. i updated my simba and i know i have my graphics and interfaces set up as required ,

though the script thinks im in bank when im not when he is actually standing at willwos .. so he will over click on the mini map so its just by elder tree and then fails to find willows ..

If i start it from the bank it clicks to the willows and does a tree or two and then fails after that .. it's hard to get what the debug box says because it spams it like crazy and ends the script where it clears it and just displays your proggy .. but i did manage to catch it before it cleared it and it said ..


[0:01:04]: ---- Found symbol bitmap 42
[0:01:04]: -- TRSMinimap._getSymbolColor(): -1
[0:01:04]: ERROR: Chop_Trees: Failed to find enough colors for tree
[0:01:04]: DETAIL: Chop_Relocate: Relocating to trees
[0:01:04]: -- TRSMinimap._getSymbolColor()
[0:01:04]: ---- Loaded symbol: Fishing Spot
[0:01:04]: ---- Found symbol bitmap 42
[0:01:04]: -- TRSMinimap._getSymbolColor(): -1
[0:01:04]: ERROR: Chop_Trees: Failed to find enough colors for tree
[0:01:04]: DETAIL: Chop_Relocate: Relocating to trees
[0:01:04]: -- TRSMinimap._getSymbolColor()
[0:01:04]: ---- Loaded symbol: Fishing Spot
[0:01:04]: ---- Found symbol bitmap 42
[0:01:04]: -- TRSMinimap._getSymbolColor(): -1
[0:01:04]: ERROR: Chop_Trees: Failed to find enough colors for tree
[0:01:04]: DETAIL: Chop_Relocate: Relocating to trees
[0:01:04]: -- TRSMinimap._getSymbolColor()
[0:01:04]: ---- Loaded symbol: Fishing Spot
[0:01:04]: ---- Found symbol bitmap 42
[0:01:04]: -- TRSMinimap._getSymbolColor(): -1
[0:01:04]: ERROR: Chop_Trees: Failed to find enough colors for tree
[0:01:04]: DETAIL: Chop_Relocate: Relocating to trees
[0:01:04]: -- TRSMinimap._getSymbolColor()
[0:01:04]: ---- Loaded symbol: Fishing Spot
[0:01:04]: ---- Found symbol bitmap 42
[0:01:04]: -- TRSMinimap._getSymbolColor(): -1
[0:01:04]: ERROR: Chop_Trees: Failed to find enough colors for tree
[0:01:04]: DETAIL: Chop_Relocate: Relocating to trees
[0:01:04]: -- TRSMinimap._getSymbolColor()
[0:01:04]: ---- Loaded symbol: Fishing Spot
[0:01:05]: ---- Found symbol bitmap 42
[0:01:05]: -- TRSMinimap._getSymbolColor(): -1
[0:01:05]: ERROR: Chop_Trees: Failed to find trees 60 times
[0:01:05]: -- TPlayer.logout()

any advice would be great

EDIT:

Well after some frustration .. i should have done this earlier insted of complaining .. i found the problem myself and seeing as the colour wasn't being found and asuming you used ACA to get the color ,hue,sat ect.. i did the same and it seems to be working fine again ..

anyone with that has a problem with the script not being able to find the tree i'd suggest to get the Auto Colour Aid tool
from here and load the image from client and set your settings to CTS 2 and then just pick the colors of the tree and not the leaves or anything as it may and im pretty sure it will think that the ground is the tree too xD

well anyways once you get all the colours just input these

into here

only change line 235 to 237 and line 239 with the numbers you get on the ACA.

I hope it works for whoever comes across this problem.. if not then ..im still learning XD

XrTw

2014-09-10 05:08:49

what is TRS and what program do you use for script opener? im using simba, but for me not works

Coh3n

2014-09-10 10:15:06

From: big man 1
I don't know suddenly it has stopped working.. i updated my simba and i know i have my graphics and interfaces set up as required ,

though the script thinks im in bank when im not when he is actually standing at willwos .. so he will over click on the mini map so its just by elder tree and then fails to find willows ..

If i start it from the bank it clicks to the willows and does a tree or two and then fails after that .. it's hard to get what the debug box says because it spams it like crazy and ends the script where it clears it and just displays your proggy .. but i did manage to catch it before it cleared it and it said ..
[0:01:04]: ---- Found symbol bitmap 42
[0:01:04]: -- TRSMinimap._getSymbolColor(): -1
[0:01:04]: ERROR: Chop_Trees: Failed to find enough colors for tree
[0:01:04]: DETAIL: Chop_Relocate: Relocating to trees
[0:01:04]: -- TRSMinimap._getSymbolColor()
[0:01:04]: ---- Loaded symbol: Fishing Spot
[0:01:04]: ---- Found symbol bitmap 42
[0:01:04]: -- TRSMinimap._getSymbolColor(): -1
[0:01:04]: ERROR: Chop_Trees: Failed to find enough colors for tree
[0:01:04]: DETAIL: Chop_Relocate: Relocating to trees
[0:01:04]: -- TRSMinimap._getSymbolColor()
[0:01:04]: ---- Loaded symbol: Fishing Spot
[0:01:04]: ---- Found symbol bitmap 42
[0:01:04]: -- TRSMinimap._getSymbolColor(): -1
[0:01:04]: ERROR: Chop_Trees: Failed to find enough colors for tree
[0:01:04]: DETAIL: Chop_Relocate: Relocating to trees
[0:01:04]: -- TRSMinimap._getSymbolColor()
[0:01:04]: ---- Loaded symbol: Fishing Spot
[0:01:04]: ---- Found symbol bitmap 42
[0:01:04]: -- TRSMinimap._getSymbolColor(): -1
[0:01:04]: ERROR: Chop_Trees: Failed to find enough colors for tree
[0:01:04]: DETAIL: Chop_Relocate: Relocating to trees
[0:01:04]: -- TRSMinimap._getSymbolColor()
[0:01:04]: ---- Loaded symbol: Fishing Spot
[0:01:04]: ---- Found symbol bitmap 42
[0:01:04]: -- TRSMinimap._getSymbolColor(): -1
[0:01:04]: ERROR: Chop_Trees: Failed to find enough colors for tree
[0:01:04]: DETAIL: Chop_Relocate: Relocating to trees
[0:01:04]: -- TRSMinimap._getSymbolColor()
[0:01:04]: ---- Loaded symbol: Fishing Spot
[0:01:05]: ---- Found symbol bitmap 42
[0:01:05]: -- TRSMinimap._getSymbolColor(): -1
[0:01:05]: ERROR: Chop_Trees: Failed to find trees 60 times
[0:01:05]: -- TPlayer.logout()
any advice would be great

EDIT:

Well after some frustration .. i should have done this earlier insted of complaining .. i found the problem myself and seeing as the colour wasn't being found and asuming you used ACA to get the color ,hue,sat ect.. i did the same and it seems to be working fine again ..

anyone with that has a problem with the script not being able to find the tree i'd suggest to get the Auto Colour Aid tool
from here and load the image from client and set your settings to CTS 2 and then just pick the colors of the tree and not the leaves or anything as it may and im pretty sure it will think that the ground is the tree too xD

well anyways once you get all the colours just input these

into here

only change line 235 to 237 and line 239 with the numbers you get on the ACA.

I hope it works for whoever comes across this problem.. if not then ..im still learning XD

The location detection doesn't work. It relies on SRL's symbol finding, which doesn't work right now. It seems that the colors need to be updated often, which is annoying. I might implement a system to read the color settings from a server, so I don't have to release a new version of the script every time. We'll see if I get time.

In the meantime your post should help others with the same issue. Thanks for that. :)

From: XrTw
what is TRS and what program do you use for script opener? im using simba, but for me not works

You have to run it with Simba. You can't just post and say it doesn't work. No one can help you with that information.

Spaceblow

2014-09-12 17:04:24

From: big man 1

Great settings, somehow this works better for me, thanks!

Coh3n, I added a tiny bit of randomness to your script:

function Chop_Relocate(tree: TTree): boolean;
var
  p: TPoint;
  tmpAcc: extended = minimap.symbolAccuracy;
begin
  DcnB_Debug('Chop_Relocate', 'Relocating to trees', DEBUG_DETAILS);
  minimap.symbolAccuracy := 0.6;

  if (InRange(minimap.getAngleDegrees(), 10.0, 350.0)) then
  begin
    //minimap.clickCompass();
    minimap.setAngle(randomRange(300, 360)); //added
    mainscreen.setAngle(MS_ANGLE_HIGH);
  end;

I've commented out minimap.clickCompass(); and added one with a random range, so it would turn the in game camera if it has to relocate for trees.

Then I've also added something at the of the Walk_ToLoc(which: Integer): Boolean; function so it would turn the in game camera when it has banked and arrived back at the trees:

  Wait(500 + Random(500));
  Players[CurrentPlayer].location := Walk_ConstToLoc(which);
  DCnB_Debug('Walk_ToLoc', 'Walked to location: ' + Walk_ConstToLoc(which), DEBUG_SUCCESS);
  if not tabBackpack.isFull() then //added
  minimap.setAngle(randomRange(300, 360)); //added
end;

I don't know if this could be handy for someone but it kind of is for me. :)

EDIT: When it wants to log out (for example when it's time for a break) it just opens the options menu. I guess it's pressing the escape button. Is this a bug in SRL or is this because of Runescape's updates?

SOmesand

2014-09-13 18:47:23

I have the script setup correctly, but when I run it, it logs in and everything. It opens my backpack, and then I get:

Exception in Script: Runtime error: "Access violation" at line 873, column 35

Any help?

fumaor

2014-09-14 18:26:17

Srry fail post, i forgiven how to setup the settings XD!

Coh3n

2014-09-15 10:44:45

From: SOmesand
I have the script setup correctly, but when I run it, it logs in and everything. It opens my backpack, and then I get:

Exception in Script: Runtime error: "Access violation" at line 873, column 35

Any help?

You didn't setup your players right. Probably misspelled your username. It needs to match the name you entered into Rafiki.

SOmesand

2014-09-15 15:04:22

From: Coh3n
You didn't setup your players right. Probably misspelled your username. It needs to match the name you entered into Rafiki.

I made sure my player info was correct. It seems like it cant find my current location. I'm not sure what I'm doing wrong. I tried starting at both the trees and at the bank. This is what I am getting.

[0:00:02]: – TPlayerArray.setup(): Success
[0:00:02]: Loading, please wait…
[0:00:02]: – TPlayer.login()
[0:00:02]: —- Already logged in
[0:00:02]: —- Logged in:
[0:00:02]: —— TRSGameTab.__initTabs(): Setup gametab properties
[0:00:03]: – TPlayer.login(): True
[0:00:03]: – TRSMinimap._getSymbolColor()
[0:00:03]: —- Loaded symbol: Fishing Spot
[0:00:03]: —- Found symbol bitmap 42
[0:00:03]: – TRSMinimap._getSymbolColor(): -1
[0:00:03]: PLAYER: Find_PlayerLocation: : Location = Bank
[0:00:03]: Exception in Script: Runtime error: "Access violation" at line 873, column 35
The following bitmaps were not freed: [Minimap Mask, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]

Coh3n

2014-09-15 20:53:09

The location part won't work since SRL's symbol finding doesn't work, so you can forget about that. As for the error, though, I don't know why that happens. What is line 873 in the script?

SOmesand

2014-09-15 21:21:59

From: Coh3n
The location part won't work since SRL's symbol finding doesn't work, so you can forget about that. As for the error, though, I don't know why that happens. What is line 873 in the script?

Line 873 reads:

Players[CurrentPlayer].location := Find_PlayerLocation;

If i delete it, I get an access violation elsewhere that uses the player location.

That line is 584. Which reads:
if (Players[CurrentPlayer].location = Walk_ConstToLoc(which)) then

Deleting that line basically renders it useless as I get more errors, and I'm not able to script. I'd like to, but I need time to learn.

Coh3n

2014-09-15 21:25:22

From: SOmesand
Line 873 reads:

Players[CurrentPlayer].location := Find_PlayerLocation;

If i delete it, I get an access violation elsewhere that uses the player location.

That line is 584. Which reads:
if (Players[CurrentPlayer].location = Walk_ConstToLoc(which)) then

Deleting that line basically renders it useless as I get more errors, and I'm not able to script. I'd like to, but I need time to learn.

I don't understand how this could have come up. Does the script login fine?

SOmesand

2014-09-15 21:46:50

From: Coh3n
I don't understand how this could have come up. Does the script login fine?

I'm not exactly sure how to setup the declare players correctly. I looked at the tutorial on here, and the format in the script is different. It won't login. I start it logged in.

How would I setup this correctly?

Players.Setup(['Player''s Nickname/Login Name/Display Name'], 'PlayerFileName');
CurrentPlayer := 0;

I get the filename part, but the filling in of the names and everything boggles my mind…

Coh3n

2014-09-16 09:01:16

From: SOmesand
I'm not exactly sure how to setup the declare players correctly. I looked at the tutorial on here, and the format in the script is different. It won't login. I start it logged in.

How would I setup this correctly?

Players.Setup(['Player''s Nickname/Login Name/Display Name'], 'PlayerFileName');
CurrentPlayer := 0;

I get the filename part, but the filling in of the names and everything boggles my mind…

Players.Setup(['myemail@gmail.com'], 'PlayerFile');

Where "myemail@gmail.com" is the username you use to login. It has to match the login name you entered into Rafiki (SRL > Player Manager).

Godless

From: Godless
My apologies, I'll give it a fiddle and see how we go.

Not a problem. I think it will be a little buggy no matter what you set it to since there's a chance the tree will completely cover the player. It will still work, though, it just might click the tree a few times.

From: SOmesand
Coh3n, I changed the color myself and it works like a charm now. 10 hours and no bugs!

Glad to hear it! It might be the easiest solution for users to set their own colors as it's hard to find the right combination that works for everyone.

Godless

2014-09-20 05:41:22

I changed the colour and it finds the trees better now. However no matter what I change the animation shift too it just keeps spam clicking and/or running south and spamming the debug box about a fishing spot.

EDIT: Changing camera angle once and moving north fixes the fishing spot issue. Can't seem to get it to stop clicking constantly and switching between trees. It is working and getting full loads and banking, just a little slowly and a bit bot like.

Spaceblow

2014-09-20 10:23:43

Coh3n, I think you might find this interesting. The following snippet is made by @bonsai, all credit goes to him. It searches for individual colours and if you play with the split and filterBetween lines, you could adjust it to your script. Just run the script when you're near the trees. Unfortunately, I don't have the knowledge to implement it in your script and I also don't have that much time so I'm afraid someone else has to do it.

So in case someone is interested…

How it looks like:

program willow
{$DEFINE SMART}
{$include_once srl-6/srl.simba}

const
   colList = [2504767,2902350,
      2574671,2769735,2901835,2703172,
      2570554,2967374,2505279,3033166,
      3231315,2502959,3032907,2439229,
      2637124,2702917,2504765,2571071,
      2437944,2372407,2504250,2438973,
      2637121,2570557,2571075,2637634,
      2571841,2703428,2571329,2504764,
      2702915,2570556,2768707,2637377,
      2572353,2572355,2373174,2636863,
      2570297,2636091,2504507,2572098,
      2570303,2571584,2504760,2571324,
      2504504,2505017];
     
var
   cdata: T2DColorData;
   i: integer;
   tpa: TPointArray;
   atpa: T2DPointArray;
   
begin
   smartEnableDrawing := true;
   setupSRL();
   
   setLength(cdata, length(colList));
   for i := 0 to high(cdata) do
      with cdata[i] do
      begin
         color := colList[i];
         tolerance := 0;
         settings := colorSetting(0);
      end;
   
   while (true) do
   begin
      cdata.gatherIn(tpa, mainscreen.getBounds());
      atpa := tpa.split(20);
      atpa.filterBetween(0, 40);
      atpa.filterBetween(400, maxint);
      smartImage.debugATPA(atpa);
      for i := 0 to high(atpa) do
         writeln('len atpa[', i, '] is ', length(atpa[i]));
      sleep(1000);
      smartImage.clear();
   end;
end.

SOmesand

2014-09-20 10:45:40

Is there a way I can change the script so that instead of stopping, it waits for more trees? I found that when it stops, it thinks its lost because it can't find trees but this occurs when I'm cutting them and others are too.

Coh3n

2014-09-20 10:54:01

From: Godless
I changed the colour and it finds the trees better now. However no matter what I change the animation shift too it just keeps spam clicking and/or running south and spamming the debug box about a fishing spot.

EDIT: Changing camera angle once and moving north fixes the fishing spot issue. Can't seem to get it to stop clicking constantly and switching between trees. It is working and getting full loads and banking, just a little slowly and a bit bot like.

There isn't a lot I can do about the spam clicking right now, but I'll try to think of something. It should never click south while it's cutting. Could you post the debug of when this happens?

From: Spaceblow
Coh3n, I think you might find this interesting. The following snippet is made by @bonsai, all credit goes to him. It searches for individual colours and if you play with the split and filterBetween lines, you could adjust it to your script. Just run the script when you're near the trees. Unfortunately, I don't have the knowledge to implement it in your script and I also don't have that much time so I'm afraid someone else has to do it.

So in case someone is interested…

How it looks like:

program willow
{$DEFINE SMART}
{$include_once srl-6/srl.simba}

const
   colList = [2504767,2902350,
      2574671,2769735,2901835,2703172,
      2570554,2967374,2505279,3033166,
      3231315,2502959,3032907,2439229,
      2637124,2702917,2504765,2571071,
      2437944,2372407,2504250,2438973,
      2637121,2570557,2571075,2637634,
      2571841,2703428,2571329,2504764,
      2702915,2570556,2768707,2637377,
      2572353,2572355,2373174,2636863,
      2570297,2636091,2504507,2572098,
      2570303,2571584,2504760,2571324,
      2504504,2505017];
     
var
   cdata: T2DColorData;
   i: integer;
   tpa: TPointArray;
   atpa: T2DPointArray;
   
begin
   smartEnableDrawing := true;
   setupSRL();
   
   setLength(cdata, length(colList));
   for i := 0 to high(cdata) do
      with cdata[i] do
      begin
         color := colList[i];
         tolerance := 0;
         settings := colorSetting(0);
      end;
   
   while (true) do
   begin
      cdata.gatherIn(tpa, mainscreen.getBounds());
      atpa := tpa.split(20);
      atpa.filterBetween(0, 40);
      atpa.filterBetween(400, maxint);
      smartImage.debugATPA(atpa);
      for i := 0 to high(atpa) do
         writeln('len atpa[', i, '] is ', length(atpa[i]));
      sleep(1000);
      smartImage.clear();
   end;
end.

That is interesting. If I have time today or tomorrow I'll look into it. Definitely looks better than what I'm using.

From: SOmesand
Is there a way I can change the script so that instead of stopping, it waits for more trees? I found that when it stops, it thinks its lost because it can't find trees but this occurs when I'm cutting them and others are too.

What? It's supposed to wait if it can't find any trees. I guess I'll look into that as well.

Just so everyone is aware, this script was written in 2008, back before RS3 and the new style of trees. The object finding method I use now is the same as I used back then but with different colors. I guess it's about time for a decent update, since a lot of people seem to be using this script.

I'll do my best to come up with something this week.

SOmesand

2014-09-20 16:29:03

Alright. It stops the script after not being able to find any trees, but what I did was add multiple colors to the color list and mess with that for awhile. Learning more and more as I read the tutorials and stuff around here.

Coh3n

2014-09-20 17:39:05

From: SOmesand
Alright. It stops the script after not being able to find any trees, but what I did was add multiple colors to the color list and mess with that for awhile. Learning more and more as I read the tutorials and stuff around here.

Can you post the debug of when this happens?

SOmesand

2014-09-20 18:22:20

I get this:

[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1

then it says script executed. Prints a progress report, and then stops. Stated reason for stopping: Lost.
Although I'm right next to the trees.

SOmesand

2014-09-20 21:21:46

Using ACA, I believe I found a color that works really well with the trees.

I've been using this (Starting at line 235)

Color := 2966076;
Hue := 1.03;
Sat := 1.00;
Exp := 67.5;
Tol := 8;

Coh3n

2014-09-21 00:52:17

From: SOmesand
I get this:

[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1
[00:00:39]: – TRSMinimap._getSymbolColor()
[00:00:39]: —- Loaded symbol: Fishing Spot
[00:00:39]: —- Found symbol bitmap 42
[00:00:39]: – TRSMinimap._getSymbolColor(): -1

then it says script executed. Prints a progress report, and then stops. Stated reason for stopping: Lost.
Although I'm right next to the trees.

Okay. I'm going to completely remove the symbol finding since it's broken at the moment.

From: SOmesand
Using ACA, I believe I found a color that works really well with the trees.

I've been using this (Starting at line 235)

Color := 2966076;
Hue := 1.03;
Sat := 1.00;
Exp := 67.5;
Tol := 8;

Thanks, I'll add that to the next version until I have time to check out another object method.

Coh3n

2014-09-21 01:32:38

I've uploaded a new version. List of changes can be found here. Setup instructions have changed – make sure your player starts in the bank and make sure your camera is zoomed all the way out. I also recommend not wearing any clothing while chopping.

The new colors may still not work sometimes, but the screen will now rotate if trees aren't found, which in most cases fixes the issue. Here's a progress report (I just wanted it do a few loads):


/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 82 -                   |
|====================================================|
|    13 Minutes and 1 Seconds                        |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 4                                 |
|      Logs Cut:   108                               |
|      Logs P/H:   497                               |
|      Experience: 7,290                             |
|      Exp P/H:    33,571                            |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/

Enjoy,
Coh3n

Godless

2014-09-21 02:36:39

From: Coh3n
There isn't a lot I can do about the spam clicking right now, but I'll try to think of something. It should never click south while it's cutting. Could you post the debug of when this happens?

I did try to but when I went to copy and paste it disappeared for some strange reason. If it comes up again I'll screenshot it. Taking a bit of a break from Woodcutting though.

Wow, for a script that old it's stood the test of time fairly well!

Godless

2014-09-21 02:38:01

From: Coh3n
I've uploaded a new version. List of changes can be found here. Setup instructions have changed – make sure your player starts in the bank and make sure your camera is zoomed all the way out. I also recommend not wearing any clothing while chopping.

The new colors may still not work sometimes, but the screen will now rotate if trees aren't found, which in most cases fixes the issue. Here's a progress report (I just wanted it do a few loads):
/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 82 -                   |
|====================================================|
|    13 Minutes and 1 Seconds                        |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 4                                 |
|      Logs Cut:   108                               |
|      Logs P/H:   497                               |
|      Experience: 7,290                             |
|      Exp P/H:    33,571                            |
|      Breaks:     0                                 |
|____________________________________________________|
|____________________________________________________/
Enjoy,
Coh3n

I'll run it over night and get back to you.

SOmesand

2014-09-21 17:44:11

I think, that the colors change on different worlds…. I have been on three different worlds and I have had to use different colors 3 times. Interesting. I have ~7000 logs in my bank at the moment. Rev. 82 really made the difference. I would advise any new users to use ACA if the script doesn't find any trees. It is most likely a color issue.

Coh3n

2014-09-21 23:38:38

From: SOmesand
I think, that the colors change on different worlds…. I have been on three different worlds and I have had to use different colors 3 times. Interesting. I have ~7000 logs in my bank at the moment. Rev. 82 really made the difference. I would advise any new users to use ACA if the script doesn't find any trees. It is most likely a color issue.

Glad it's working (other than the colors, obviously). :)

Godless

2014-09-21 23:56:52

After adding my own colours it seems a lot more stable. After the update I haven't ran in to the fishing spot error. The only problem I can see now is the clicking one. Thanks for your continued updates and support. I am sure I am not the only person who is thankful. :)

SOmesand

2014-09-22 14:09:39

I agree with Godless. After adding user defined colors, it is stable. Coh3n, you should include a link to ACA and a small guide to setting it up with the trees so that way anyone who uses the script knows how to use it properly. I have 12000 logs in my bank now and my alt account hasn't gotten banned. I'm now WC 73, and I'm gonna attempt to pull a 99 in RS3!

SOmesand

2014-09-22 14:13:22

Also, is there a way to set this script up to cut oak logs near dray nor?

Coh3n

2014-09-22 20:22:01

From: SOmesand
Also, is there a way to set this script up to cut oak logs near dray nor?

No, there is not. It used to have that functionality, but it was removed when the new tree graphics were released.

tulpiuka

2014-09-23 07:22:43

From: SOmesand
I agree with Godless. After adding user defined colors, it is stable. Coh3n, you should include a link to ACA and a small guide to setting it up with the trees so that way anyone who uses the script knows how to use it properly. I have 12000 logs in my bank now and my alt account hasn't gotten banned. I'm now WC 73, and I'm gonna attempt to pull a 99 in RS3!

I plan to train my wc a bit, i'll try to update the colors. How many world samples should i take? and what part of the tree should i take colors from. Green only or all over?

The Mayor

2014-09-23 07:29:52

From: tulpiuka
I plan to train my wc a bit, i'll try to update the colors. How many world samples should i take? and what part of the tree should i take colors from. Green only or all over?

AFAIK the leaves of the tree aren't actually clickable, so the trunk is what you're after. The more colors you can get the better, 30, 40+ etc and from multiple worlds. It's a good idea to save your .aca file so you can add to it later if need be.

SOmesand

2014-09-23 15:38:25

From: Coh3n
No, there is not. It used to have that functionality, but it was removed when the new tree graphics were released.

Hm, alright. I'm glad that we can cut willows though. I do notice that sometimes it finds the same color over and over and when it can't click it, it keeps trying anyways…. You should set it to automatically rotate the camera every x amount of seconds or something…

Coh3n

2014-09-23 18:25:17

From: SOmesand
Hm, alright. I'm glad that we can cut willows though. I do notice that sometimes it finds the same color over and over and when it can't click it, it keeps trying anyways…. You should set it to automatically rotate the camera every x amount of seconds or something…

Alright, I'll add that to my list.

SOmesand

2014-09-23 20:08:43

From: Coh3n
Alright, I'll add that to my list.

Sounds good.

I've been really power using the script lately…. I have around 20000 willows in my bank now and it's so great because I'm gonna use them in a firemaking script to burn them, and then bank the ashes.

Ashes currently sell for 451 Gp. Assume we sell 20000 ashes…..

Godless

2014-09-25 07:29:20

From: tulpiuka
I plan to train my wc a bit, i'll try to update the colors. How many world samples should i take? and what part of the tree should i take colors from. Green only or all over?

To be perfectly honest I got lucky with this script. I didn't have to use ACA. I just selected a darker brown from the top of the Willow, left the hue and other settings as they were and it ran. For 6hrs. You might not be as lucky, so don't blame me if it doesn't work. :P

Godless

2014-09-25 07:30:42

From: SOmesand
Sounds good.

I've been really power using the script lately…. I have around 20000 willows in my bank now and it's so great because I'm gonna use them in a firemaking script to burn them, and then bank the ashes.

Ashes currently sell for 451 Gp. Assume we sell 20000 ashes…..

9m. You could have made 90m in that time and then burned 15m worth of Yews with DXP coming up. But oh well…

ochovg

2014-09-25 12:35:39

Should I be in legacy mode while running this script?

Coh3n

2014-09-25 13:03:17

From: ochovg
Should I be in legacy mode while running this script?

No.

ochovg

2014-09-25 13:05:13

I followed the setup guide and when I run the script:
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 82 - |
|====================================================|
| 5 Seconds |
|—————————————————-|
|____________________________________________________|
|____________________________________________________/
/=======================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 82 - |
|=======================================================================================|
| Ran for: 5 Seconds |
|?????? ???????? ???????????? ??????? ???????? ?????????? ???????? ???????????? ????????|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|?????? ???????? ???????????? ??????? ???????? ?????????? ???????? ???????????? ????????|
|???????????????????????????????????????????????????????????????????????????????????????|
| Totals: | 0 | | 0 | N/A | 0 | 0 |
|_______________________________________________________________________________________|
|_______________________________________________________________________________________/
[0:00:05]: – Succesfully freed SMART[14740]
[0:00:05]: Successfully executed.

SOmesand

2014-09-25 14:24:07

From: Godless
9m. You could have made 90m in that time and then burned 15m worth of Yews with DXP coming up. But oh well…

True. That sounds a lot more efficient…..

ochovg

2014-09-25 15:09:08

Getting this error:
ERROR: Bank_Logs: Failed to find bank screen
[0:04:07]: – TRSBankscreen.__openNPC()
[0:04:07]: – TRSBankscreen.__openNPC(): result = False
[0:04:07]: ERROR: Bank_Logs: Failed to open bank, retrying…
[0:04:07]: ERROR: Bank_Logs: Failed to find bank screen
[0:04:07]: DETAIL: Bank_Logs: Failed to open bank after 40 tries
[0:04:07]: – TPlayer.logout()

ochovg

2014-09-25 16:08:10

Got the bank error fixed, now Im getting this issue:

ERROR: Chop_Trees: Failed to find enough colors for tree

My character wont cut logs.

SOmesand

2014-09-25 21:38:51

From: ochovg
Got the bank error fixed, now Im getting this issue:

ERROR: Chop_Trees: Failed to find enough colors for tree

My character wont cut logs.

Have you downloaded the ACA? If not, then go to here; https://villavu.com/forum/showthread.php?t=26944

Read the tutorial on how to use it, and then, using the ACA, selects CTS2, and find colors for your trees. Find a server where there aren't many people cutting the trees, and use the ACA to pick the best color. Be sure to fill it all in correctly, and try the script again. If you need more help, I can explain further.

abonil1

2014-09-27 12:57:17

Hi guys , is there a solution to the banking problem? my character just stands still near the walls inside the bank then after awhile SMART logs me out

SOmesand

2014-09-27 21:00:13

Mine seems to be doing the same thing… I'll look and see if it's a color issue..

SOmesand

2014-09-27 21:34:33

From: abonil1
Hi guys , is there a solution to the banking problem? my character just stands still near the walls inside the bank then after awhile SMART logs me out

It is a color issue. I changed one of the default samba files, because the script relies on colors from that, and those colors need to be updated.

Coh3n, there's a file with samba called bank screen. The colors for BANK_NPC_DRAYNOR need to be updated. I changed mine for world 43, but I believe they might need to be updated properly, as I did it a little cursorily.

Godless

2014-09-28 03:15:35

From: SOmesand
It is a color issue. I changed one of the default samba files, because the script relies on colors from that, and those colors need to be updated.

Coh3n, there's a file with samba called bank screen. The colors for BANK_NPC_DRAYNOR need to be updated. I changed mine for world 43, but I believe they might need to be updated properly, as I did it a little cursorily.

You've been very helpful on this thread. I'd just like to thank you on behalf of everyone else. :)

SOmesand

2014-09-28 08:33:07

From: Godless
You've been very helpful on this thread. I'd just like to thank you on behalf of everyone else. :)

No problem guys. It's awesome to help the community out, because we are a team. Coh3n has an acronym that I really like.

Together Everyone Achieves More

I'm new to the world of colour bots AND SRL, but I'm learning how to script and I hope to one day develop a working script for you guys
:)

Godless

2014-09-28 09:06:36

From: SOmesand
No problem guys. It's awesome to help the community out, because we are a team. Coh3n has an acronym that I really like.

Together Everyone Achieves More

I'm new to the world of colour bots AND SRL, but I'm learning how to script and I hope to one day develop a working script for you guys
:)

Great to hear! You're doing better than I am! I find it hard to find the time and wrap my head around these things. I keep faith that one day soon I'll be able to have another go. :P

Coh3n

2014-09-28 17:09:14

From: SOmesand
It is a color issue. I changed one of the default samba files, because the script relies on colors from that, and those colors need to be updated.

Coh3n, there's a file with samba called bank screen. The colors for BANK_NPC_DRAYNOR need to be updated. I changed mine for world 43, but I believe they might need to be updated properly, as I did it a little cursorily.

Can you file a bug report here, please?

godzassassin

2014-09-30 02:34:24

Coh3n

2014-09-30 14:59:12

Glad it still works for the most part. :)

SOmesand

2014-09-30 15:12:10

This script is rather wonderful. It runs perfectly. the only problem i encounter is when runescape updates after 6 hours. I am gonna look into using smartmanager or something.

Coh3n

2014-10-01 10:00:44

From: SOmesand
This script is rather wonderful. It runs perfectly. the only problem i encounter is when runescape updates after 6 hours. I am gonna look into using smartmanager or something.

Hmm? SMART should just restart. The 6 hour thing is handled in SRL. What happens when you hit 6 hours?

SOmesand

2014-10-01 14:14:44

From: Coh3n
Hmm? SMART should just restart. The 6 hour thing is handled in SRL. What happens when you hit 6 hours?

I hit 6 hours, and it'll restart. But after 2 more hours I am logged out and this usually happens when I'm not around the computer, so I can't tell you why it logs out. I'll look at a debug later.

Coh3n

2014-10-01 16:52:15

From: SOmesand
I hit 6 hours, and it'll restart. But after 2 more hours I am logged out and this usually happens when I'm not around the computer, so I can't tell you why it logs out. I'll look at a debug later.

Sounds like it has nothing to do with the restart, then, if it's running for a couple hours after the restart. It could be that it's not finding tree colors after the restart.

SOmesand

2014-10-01 18:07:34

From: Coh3n
Sounds like it has nothing to do with the restart, then, if it's running for a couple hours after the restart. It could be that it's not finding tree colors after the restart.

I'll look into that. It could be due to the script logging into a different world where I don't have the colors setup for it……
That's most likely it. The colors are different world to world, and I have them setup for world 43. When I go to the default world (34), they don't work.

Coh3n

2014-10-01 18:31:23

From: SOmesand
I'll look into that. It could be due to the script logging into a different world where I don't have the colors setup for it……
That's most likely it. The colors are different world to world, and I have them setup for world 43. When I go to the default world (34), they don't work.

That's really weird. You can set your player to always log into world 43:


with players[0] do
begin
  world := 43;
  // other stuff here
end;

And if you have world 43 set as a favourite world it should select it from the quick select boxes.

SOmesand

2014-10-01 20:26:37

From: Coh3n
That's really weird. You can set your player to always log into world 43:
with players[0] do
begin
  world := 43;
  // other stuff here
end;
And if you have world 43 set as a favourite world it should select it from the quick select boxes.

Wow… How did I miss that? I'll do that and see how long I can run it for before it stops or gets banned. I don't think it'll get banned. I'm at WC 89. 70000 logs.

Coh3n

2014-10-02 10:00:28

From: SOmesand
Wow… How did I miss that? I'll do that and see how long I can run it for before it stops or gets banned. I don't think it'll get banned. I'm at WC 89. 70000 logs.

Awesome!

I'm not sure if there's a guide that specifically says you can set the player's world. Seems like there should be. :p

SOmesand

2014-10-02 11:49:01

From: Coh3n
Awesome!

I'm not sure if there's a guide that specifically says you can set the player's world. Seems like there should be. :p

Yeah, but for the time being, it works like a charm. I set the colors for 34, and I ran it for ~20 hours now.

Coh3n

2014-10-02 15:28:27

From: SOmesand
Yeah, but for the time being, it works like a charm. I set the colors for 34, and I ran it for ~20 hours now.

I find it interesting that there seems to be different colors for each world. I wonder if this is consistent for everybody?

SOmesand

2014-10-02 15:38:44

From: Coh3n
I find it interesting that there seems to be different colors for each world. I wonder if this is consistent for everybody?

I think I read in a thread somewhere that the colors change with logins or world changes…. It seems to change with logins as well for me….. I wonder if there's anyone else's input on this?

3Garrett3

2014-10-02 15:39:09

From: Coh3n
I find it interesting that there seems to be different colors for each world. I wonder if this is consistent for everybody?

To be fair, the point of ACA is that you grab colours while hopping worlds because they change slightly every time you load another world, isn't it? So if he's just using the colour dropper on 34 then there's no way it would work on other worlds. I'm surprised it even works after the 6 hour fix.

SOmesand

2014-10-02 15:43:17

From: 3Garrett3
To be fair, the point of ACA is that you grab colours while hopping worlds because they change slightly every time you load another world, isn't it? So if he's just using the colour dropper on 34 then there's no way it would work on other worlds. I'm surprised it even works after the 6 hour fix.

Oh yeah, that's right! I've been using it for just one world and nothing else…. So that's why my colors won't work after it relogs in…..

Coh3n

2014-10-02 19:59:35

From: 3Garrett3
To be fair, the point of ACA is that you grab colours while hopping worlds because they change slightly every time you load another world, isn't it? So if he's just using the colour dropper on 34 then there's no way it would work on other worlds. I'm surprised it even works after the 6 hour fix.

That's what I usually do, but it still didn't work for some people. I literally had an ACA file with dozens and dozens of colors in it.

For the most part it worked, but then sometimes it would find a lot of objects that weren't trees, which isn't ideal. From what I've seen it seems the most reliable method is for people to pick their own colors. Also, not ideal.

I imaging if I rewrote my object finding methods I could improve it, but I just don't have the time.

Godless

2014-10-02 21:37:42

From: Coh3n
I find it interesting that there seems to be different colors for each world. I wonder if this is consistent for everybody?

Whilst I was using this script (over the course of a week or so) I never had to change my colour. I changed world ~4/5 times, too.

SOmesand

2014-10-02 22:12:01

From: Godless
Whilst I was using this script (over the course of a week or so) I never had to change my colour. I changed world ~4/5 times, too.

Did you use the default color??? What world?

Coh3n

2014-10-03 00:10:00

From: Godless
Whilst I was using this script (over the course of a week or so) I never had to change my colour. I changed world ~4/5 times, too.

Lol. I really don't know what to say, then. :p

SOmesand

2014-10-03 06:35:09

From: Coh3n
Lol. I really don't know what to say, then. :p

I guess some people get lucky with the color you chose.

Godless

2014-10-03 08:05:17

From: SOmesand
I guess some people get lucky with the color you chose.

I should have made my first post more clear… I picked my own colour with the picker built in to Simba. Just a basic dark brown from the top of the tree. I recall using W12, W54, W15. Though my memory is a little hazy by this stage. Once I picked it I never had to change again (only used this script for a week/week and a half though).

SOmesand

2014-10-03 09:29:28

From: Godless
I should have made my first post more clear… I picked my own colour with the picker built in to Simba. Just a basic dark brown from the top of the tree. I recall using W12, W54, W15. Though my memory is a little hazy by this stage. Once I picked it I never had to change again (only used this script for a week/week and a half though).

That's interesting. I've done the same, except if I change worlds the color doesn't work anywhere else.

Godless

2014-10-04 08:42:22

From: SOmesand
That's interesting. I've done the same, except if I change worlds the color doesn't work anywhere else.

That is strange, to say the least. Perhaps I just got really, really, really lucky lol?

gigzv3

2014-10-05 09:01:57

need help i started script now but the problem is its not doing anything all i get is a pop up dialog that says no stats account entered woul you like to set one up ? i clicked yes then it does nothing, when i click no then it asks me would you like to disable this dialog from showing this again in the future not sure what to do ??? help ?

Coh3n

2014-10-05 14:46:14

From: gigzv3
need help i started script now but the problem is its not doing anything all i get is a pop up dialog that says no stats account entered woul you like to set one up ? i clicked yes then it does nothing, when i click no then it asks me would you like to disable this dialog from showing this again in the future not sure what to do ??? help ?

Click No, you don't want to setup a stats account, then Yes, you'd like to prevent that popup from starting again.

Stats currently doesn't work.

gigzv3

2014-10-06 02:44:37

thx
i got it to work but some times it clicks outside the bank and doesn't recognise where the bank is

wowgnomes

2014-10-07 09:03:02

How does one set up this bot properly?
When I set it up it asks me to create a stats account, which ends the script if I pick either yes or no.
Thanks in advance!

Coh3n

2014-10-09 18:48:52

From: wowgnomes
How does one set up this bot properly?
When I set it up it asks me to create a stats account, which ends the script if I pick either yes or no.
Thanks in advance!

Clicking no should continue with the script. Can you post what's printed when you say no?

Simbanoobie

2014-10-12 23:26:57

Used this to level a few new accounts to 60 wc, thanks :D

godzassassin

2014-10-18 16:53:37

Awesome script helped get me to 99 this morning :D

FeRReTTi

2014-10-20 13:30:01

Anyone having issues with the script not banking correctly?

Coh3n

2014-10-23 19:48:59

From: FeRReTTi
Anyone having issues with the script not banking correctly?

What happens?

lendaz

2014-10-23 22:05:24

@Coh3n , i need a help.My pc doesnt not support smart ( too low ) , i always use the browser to play rs.But when i put // in all smart variables the script do not even start.What i do?

FeRReTTi

2014-10-24 15:15:36

From: Coh3n
What happens?

It can't find the bankers for some reason. I also had to edit the color of the trees so it would find them. And when it can't find the bankers it runs off somewhere and repeatedly logs in and out.

Trollcrank

2014-10-24 21:17:21

Fantastic script.

I never thought of limiting the search radius for the pixel shift before seeing this script. This proggy is a tad bit more or less than what I should've gotten because I messed with the antiban a bit. I also changed the colors because it didn't detect a tree or two on one of the worlds I tried. After switching colors it created a lot more yellow boxes, as in it detected more of the correct color.

/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 82 - |
|====================================================|
| 6 Hours, 32 Minutes and 20 Seconds |
|—————————————————-|
| Player: 0 |
| Location: Bank |
| Active: False |
| Reason: Cut desired number of logs |
| Tree Type: Willow |
| Loads Done: 108 |
| Logs Cut: 3,019 |
| Logs P/H: 462 |
| Experience: 203,782 |
| Exp P/H: 31,164 |
| Breaks: 1 |
|____________________________________________________|
|____________________________________________________/

Quentini

2014-10-31 09:47:29

It seems the colors have changed over night and none can be found, so the bot just sits and tries to search for the colors.

[0:01:10]: ERROR: Chop_Tree: Failed to find mouseOverText
[0:01:10]: DETAIL: Chop_Trees: Length tmpATPA[20]: 313

edit: Changing worlds solved the issue; however, now that I have experienced colors being slightly different among various worlds, how can I code this as a fail safe for my own scripts?

Coh3n

2014-11-04 10:20:00

From: Quentini
It seems the colors have changed over night and none can be found, so the bot just sits and tries to search for the colors.

[0:01:10]: ERROR: Chop_Tree: Failed to find mouseOverText
[0:01:10]: DETAIL: Chop_Trees: Length tmpATPA[20]: 313

edit: Changing worlds solved the issue; however, now that I have experienced colors being slightly different among various worlds, how can I code this as a fail safe for my own scripts?

The only way I can think of is to use ACA to pick colors from multiple different worlds and use those in the script.

Sorry for my lack of support for this script; I've been incredibly busy this semester. Also doesn't help that COD:AW just came out. :p

FeRReTTi

2014-11-04 20:41:16

From: Coh3n
The only way I can think of is to use ACA to pick colors from multiple different worlds and use those in the script.

Sorry for my lack of support for this script; I've been incredibly busy this semester. Also doesn't help that COD:AW just came out. :p

No worries! Script still works! I had to uses ACA to get it to find the trees, but it works nonetheless! :)

TkrZ

2014-11-08 23:21:45

Hey, could I get a copy of this? I've tried messing around with ACA and I just can't get something to work, thanks! :)

Chrisiyyi1

2014-11-11 16:32:14

hey the script seems to not work for me i get the following error… anyone might be able to help me with this ? >__< it says it starts up but it doesnt and then the script stops [ATTACH=CONFIG]24418[/ATTACH]

Quentini

2014-11-11 17:44:29

From: Chrisiyyi1
hey the script seems to not work for me i get the following error… anyone might be able to help me with this ? >__< it says it starts up but it doesnt and then the script stops [ATTACH=CONFIG]24418[/ATTACH]

Did you make sure you setup Simba correctly and updated SRL and it's extensions?

Chrisiyyi1

2014-11-11 19:09:27

From: Quentini
Did you make sure you setup Simba correctly and updated SRL and it's extensions?

yes i did follow the guide on the website but it seems to still given the error, what can it exactly be ?

xCrazyGuyNL

2014-11-11 19:29:20

Can't seem to get it working, even tough i filled the configuration in the script… bad luck for me

Quentini

2014-11-11 20:52:22

From: Chrisiyyi1
yes i did follow the guide on the website but it seems to still given the error, what can it exactly be ?

Script starts up just fine for me. Double check you have setup Simba / SRL properly using these guides if your SMART client is failing to load. (I assume that is the problem you are having based on your picture)

https://villavu.com/forum/showthread.php?t=47714

https://villavu.com/forum/showthread.php?t=107365

From: xCrazyGuyNL
Can't seem to get it working, even tough i filled the configuration in the script… bad luck for me

Script works; however; you must do this since the colors have changed:

From: FeRReTTi
No worries! Script still works! I had to uses ACA to get it to find the trees, but it works nonetheless! :)

Chrisiyyi1

2014-11-12 07:54:11

The smart client does start up but the script wont run it starts and then gives that error and the script stops even though smart starts

Quentini

2014-11-12 08:55:34

From: Chrisiyyi1
The smart client does start up but the script wont run it starts and then gives that error and the script stops even though smart starts

You will need to post the errors that pop up in the debug box so you can be better helped.

Chrisiyyi1

2014-11-12 10:37:27

From: Quentini
You will need to post the errors that pop up in the debug box so you can be better helped.

/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 82 - |
|====================================================|
| 3 Seconds |
|—————————————————-|
|____________________________________________________|
|____________________________________________________/
/=======================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 82 - |
|=======================================================================================|
| Ran for: 3 Seconds |
|?????? ???????? ???????????? ??????? ???????? ?????????? ???????? ???????????? ????????|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|?????? ???????? ???????????? ??????? ???????? ?????????? ???????? ???????????? ????????|
|???????????????????????????????????????????????????????????????????????????????????????|
| Totals: | 0 | | 0 | N/A | 0 | 0 |
|_______________________________________________________________________________________|
|_______________________________________________________________________________________/
[0:00:03]: —- Succesfully freed SMART[3204]
[0:00:03]: Successfully executed.

it says it starts but just stops instantly and where can i find the debug box?

Brose

2014-11-12 17:09:14

From: Chrisiyyi1
/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 82 - |
|====================================================|
| 3 Seconds |
|—————————————————-|
|____________________________________________________|
|____________________________________________________/
/=======================================================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 82 - |
|=======================================================================================|
| Ran for: 3 Seconds |
|?????? ???????? ???????????? ??????? ???????? ?????????? ???????? ???????????? ????????|
| Nick | Active | Location | Loads | Tree | Logs Cut | Levels | Experience | Breaks |
|?????? ???????? ???????????? ??????? ???????? ?????????? ???????? ???????????? ????????|
|???????????????????????????????????????????????????????????????????????????????????????|
| Totals: | 0 | | 0 | N/A | 0 | 0 |
|_______________________________________________________________________________________|
|_______________________________________________________________________________________/
[0:00:03]: —- Succesfully freed SMART[3204]
[0:00:03]: Successfully executed.

it says it starts but just stops instantly and where can i find the debug box?

Most likely the portion where you setup your Players is incorrect. Check line 130
Players.Setup(['PutYourNameHere OR YourNick OR YourLogin'], 'default');

Brose

2014-11-12 17:19:55

From: IRobot335
Hey, could I get a copy of this? I've tried messing around with ACA and I just can't get something to work, thanks! :)

At line 237, i changed the colour to 2837841. You could probably use the colour picker in Simba and just click on the tree and change the colour accordingly.

Dark_Flame

2014-11-13 14:03:01

Working perfectly for me, off to 99 I go :)

rudeboy99999

2014-11-15 14:37:22

Great script, use this on my Ironman all the time!

I do notice that occasionally it will run south to the obelisk and then run back north to the trees or bank, which seems a little odd.

I will try get a screenie next time it happens

GTFO_Jagex

2014-11-17 07:13:33

Nice 50k/hr

MasterXehanort

2014-11-21 03:19:36

Modified this to cut oak logs to 99 con my ironman. Currently ~27000 xp/hr and ~700 logs/hr. I am having trouble finding a good color for oak trees though. They're the same color as everything around D:

 Color  := 1193524;
        Hue    := 0.80;
        Sat    := 0.75;
        Tol    := 8

is stable for now. It does cause the mouse to hover over the trees a little before finding the uptext (which idk is how botlike, need to avoid redflagging). Also, since the branches for the Oaks stretch out far enough to cover the player, the script keeps trying to do mouse-over-text because it can't see the player in the chopping animation.

Might use this for maples, teaks, and mahogany later on D: Have to 99 fletching, wc, and firemaking as well. Will end up using sign of the porter at teaks/mahogany though.

3Garrett3

2014-11-21 11:35:04

From: MMOE
Modified this to cut oak logs to 99 con my ironman. Currently ~27000 xp/hr and ~700 logs/hr. I am having trouble finding a good color for oak trees though. They're the same color as everything around D:
 Color  := 1193524;
        Hue    := 0.80;
        Sat    := 0.75;
        Tol    := 8 
is stable for now. It does cause the mouse to hover over the trees a little before finding the uptext (which idk is how botlike, need to avoid redflagging). Also, since the branches for the Oaks stretch out far enough to cover the player, the script keeps trying to do mouse-over-text because it can't see the player in the chopping animation.

Might use this for maples, teaks, and mahogany later on D: Have to 99 fletching, wc, and firemaking as well. Will end up using sign of the porter at teaks/mahogany though.

I think the general strategy is to use the moss-y colour at the base of the tree for searching (if that's what you mean by "hovering around the tree before finding uptext"). This is because Jagex made only parts of the tree click-able. The base is always able to be clicked though, so if you pick those colours you should be better off.

MasterXehanort

2014-11-22 19:22:47

From: 3Garrett3
I think the general strategy is to use the moss-y colour at the base of the tree for searching (if that's what you mean by "hovering around the tree before finding uptext"). This is because Jagex made only parts of the tree click-able. The base is always able to be clicked though, so if you pick those colours you should be better off.

When the camera angle is North/High, the base of the tree doesn't show (It's covered by the leaves/branches of the oaks). Still trying to work on fixing the camera angle during midterms. Might be a few days though.

SOmesand

2014-11-23 14:51:26

I have run across an issue that I've never had happen before. I'll be cutting wood, and I'll walk away for a few hours. Come back later to find it running around Draynor Manor, and relogging everytime it can't find trees. Why would it run to Draynor Manor?

shaezy

2014-12-06 07:05:17

Thanks! i had the same problem and it worked

drake5432

2014-12-11 16:41:04

Can someone help me setup scripts i have no idea why nothing works. i have all the stuff i need but i have no idea what im doing in the script

akarigar

2014-12-11 16:45:06

From: drake5432
Can someone help me setup scripts i have no idea why nothing works. i have all the stuff i need but i have no idea what im doing in the script

Make sure you follow this guide. It should explain how to get a script working properly. If you still have issues, post with more details (error logs, better description of what is going wrong, etc). We need to know what the problem is before we can help you out.

drake5432

2014-12-11 17:27:32

From: akarigar
Make sure you follow this guide. It should explain how to get a script working properly. If you still have issues, post with more details (error logs, better description of what is going wrong, etc). We need to know what the problem is before we can help you out.

I have done that already…

STATS_ID = ''; // Your SRL Stats Username
STATS_PASS = ''; // Your SRL Stats Password
ENABLE_DEBUG = true; // If true, will only print the progress report
BREAK_AFTER = 20; // Loads until break/switch player
SMART_DRAWING = true; // Does some debugging on SMART
SRL_LOG = true; // Saves SRL debug to a log file
SRL_DEBUG = true; // Debugs SRL procedures in the debug box
IP_SCREEN = true; // Takes a screenshot of your last IP in case of hacks
MAX_TIME_PER_TREE = 60; // Will move on to another tree after about X seconds not matter what
ANIMATION_SHIFT = 150; // The maximum player IDLE pixel shift. Can adjust value if player isn't moving between trees or moving too soon. WILL vary depending on player's clothing.

What do i do with that?

xxgamerxx

2014-12-14 15:18:16

I have everything setup, but all it does is start, says successfully executed and shuts down.

SlipperyPickle

2014-12-31 06:15:17

From: xxgamerxx
I have everything setup, but all it does is start, says successfully executed and shuts down.

Same problem for me. While other scripts do run, this one stops immediately.

tlance

2015-01-03 17:19:02

const
STATS_ID = ''; // Your SRL Stats Username
STATS_PASS = ''; // Your SRL Stats Password

what the hell is the stats ID and pass?

Battousai

2015-02-03 22:18:23

I think the colors need updating, I ran it for 5 hours and only got about 1000 logs

scar_operater

2015-02-10 19:50:54

[0:04:12]: ERROR: Chop_Trees: Failed to find enough colors for tree

mcnollend

2015-02-24 21:15:37

mcnollend

2015-03-01 00:31:05

mcnollend

2015-03-07 00:57:38

[php]/====================================================|
| Coh3n's Draynor Chop N' Bank! |
| - Revision 82 - |
|====================================================|
| 12 Hours, 40 Minutes and 20 Seconds |
|—————————————————-|
| Player: 0 |
| Location: Bank |
| Active: True |
| Tree Type: Willow |
| Loads Done: 181 |
| Logs Cut: 4,887 |
| Logs P/H: 386 |
| Experience: 329,872 |
| Exp P/H: 26,031 |
| Breaks: 8 |
|____________________________________________________|
|____________________________________________________/[/php]

Previous proggy was weird where it was having a hard time actually finding the colors of the tree, sometimes it would find a few spots to check, the spots would be on unclickable parts, or it would just be unable to locate a tree color. So I went ahead and used ACA to make a new color selection and so far it's been working out better.

ContraCosta

2015-03-27 04:43:22

The previous comment I left because it was entirely my fault, but now it seems that after I fill my inventory, I cannot bank it. instead I repeatedly log in and out, then walking north, eventually finding myself at Draynor Manor.

Zombiousdr

2015-04-24 04:59:04

After a bit of tweaking in the code I got this working.

Change the colour for willows to 2837841, worked for me.
Also I adjusted the wait times between switching trees(not all of use Dragon Hatchets =p)

Runs very smoothly now!

Zombiousdr

2015-04-27 06:40:31

General_Patrick

2015-05-16 11:44:12

Here is a recent proggy using the script. Had to change the color, but now everything is working well!

/====================================================|
|           Coh3n's Draynor Chop N' Bank!            |
|                  - Revision 82 -                   |
|====================================================|
|    3 Hours, 6 Minutes and 11 Seconds               |
|----------------------------------------------------|
|    Player:   0                                     |
|    Location: Willows                               |
|    Active:   True                                  |
|      Tree Type:  Willow                            |
|      Loads Done: 40                                |
|      Logs Cut:   1,078                             |
|      Logs P/H:   347                               |
|      Experience: 72,765                            |
|      Exp P/H:    23,448                            |
|      Breaks:     1                                 |
|____________________________________________________|
|____________________________________________________/

General_Patrick

2015-05-16 19:45:21

After playing with the code a little bit to find a better color to use for the script, I used this setting
and found my results to be very good. Let me know how these settings work! (Lines 237-239)

Color  := 2703686;
Hue    := 0.30;
Sat    := 2.56;

rickhunley

2015-05-18 02:38:07

Does this only work with willows?

rickhunley

2015-05-18 03:02:02

From: Brose
Most likely the portion where you setup your Players is incorrect. Check line 130
Players.Setup(['PutYourNameHere OR YourNick OR YourLogin'], 'default');

Thanks, this fixed my issue :)

rickhunley

2015-05-18 03:03:18

How do I modify the script to get normal trees from level 1 - 15?

Thanks

rickhunley

2015-05-18 03:08:44

From: 3Garrett3
To be fair, the point of ACA is that you grab colours while hopping worlds because they change slightly every time you load another world, isn't it? So if he's just using the colour dropper on 34 then there's no way it would work on other worlds. I'm surprised it even works after the 6 hour fix.

Newb question, how do you identify what the colours are? Thanks

General_Patrick

2015-05-18 09:18:05

From: rickhunley
Does this only work with willows?

Yes it works for willows.

General_Patrick

2015-05-18 09:24:41

From: rickhunley
How do I modify the script to get normal trees from level 1 - 15?

I don't think you can at least for this script. Getting the colors is easy, but you would need to change the location where your script would need to go and chop the trees as well as how the script will deal with banking.

rickhunley

2015-05-18 09:30:25

From: General_Patrick
Yes it works perfectly for willows.

Ha, I was meaning if it works with other trees too ^_^

General_Patrick

2015-05-18 10:44:40

Oh ok. In short, no the configuration I gave will not work with other trees. However, I can help you get the right color, hue, and saturation. Just let me know a f2p location where you want the trees to be cut. If you want to learn how to code for Simba, there are some great tutorials on the forums to help you out.

Rans

2015-05-19 10:03:33

so i found my solution but the script isnt running. when i click run do i need to enter my user and pass then the script begins? or what.

'PlayerFileName' is what don't understand i edited player.setup with my username in RS but im stuck after that.

rickhunley

2015-05-20 21:49:37

From: Moped
so i found my solution but the script isnt running. when i click run do i need to enter my user and pass then the script begins? or what.

'PlayerFileName' is what don't understand i edited player.setup with my username in RS but im stuck after that.

Players.Setup(['insertyourRSusernamehere or nickname you put in player manager'], 'default - leave this as default, unless you changed the name of your army in player manager');

Let me know if it works .

Good luck

Rans

2015-05-24 08:43:21

Rans

2015-05-24 15:18:17

hello everyone. JUST A NOTE, i am not saying this is what you should do just saying a friendly tip on helping those ho cant find trees as easy. I recently found a color that helped me out find more trees so the script doesnt shut down.

Color := 2503728;

if it works better for you great, if not then keep on keeping on!

Rans

2015-05-24 15:47:56

Yush Dragon

2015-05-29 18:21:19

There's one little issue that it has. It gets messed up when the player is standing on fire.
Might want to fix that bro.

TimeRiders

2015-06-04 00:21:41

The script executes as soon as it starts

Sometimes will run for 10 seconds ill try to log in manually and put it at the tress but no go :(

TimeRiders

2015-06-04 00:32:43

From: rickhunley
Players.Setup(['insertyourRSusernamehere or nickname you put in player manager'], 'default - leave this as default, unless you changed the name of your army in player manager');

Let me know if it works .

Good luck

That did not work for me

GetHyper

2015-06-09 12:38:20

Thanks for the script, I had to alter the colour but works well now :)

SRL Archive - RS3 Woodcutting

[SRL-6] Draynor Chop N' Bank | By Coh3n

Coh3n

ian.

Coh3n

JAD

ian.

Coh3n

alexrocket2

Coh3n

alexrocket2

ian.

alexrocket2

Coh3n

ian.

Coh3n

ian.

Coh3n

alexrocket2

ian.

Coh3n

[JS]

Coh3n

[JS]

Coh3n

[JS]

Coh3n

[JS]

Camaro'

Coh3n

cycrosism

Coh3n

Markus

Coh3n

Coh3n

n33d scripts

Coh3n

n33d scripts

Coh3n

Smarter Child

Coh3n

ffcfoo

Dynamite

ffcfoo

NocKme

Coh3n

NocKme

Coh3n

NocKme

Coh3n

ffcfoo

Coh3n

hackncrack1

Coh3n

lewiss

Coh3n

sam66

Coh3n

sam66

Cerium

Coh3n

sam66

Coh3n

sam66

Coh3n

sam66

Coh3n

sam66

Coh3n

sam66

Coh3n

sam66

D1zl3

Sean[714]

Sabzi

Sean[714]

D1zl3

Coh3n

sam66

Coh3n