SRL Archive - S.M.A.R.T.

Hello all, it's time for a major revision bump due to some pretty significant changes and improvements.
Say hello to v8.0 (needs Simba 0.99 or later), but first, some things worth pointing out:

1. Java must be on your path now, since the new out-of-process launching method that made most of the improvements possible uses java.exe directly. Look up a guide to add java.exe to your path if you're not sure how. As a result, only the plugin for Simba needs to be a compiled library now (along with native methods for the Java side), and most of SMART is in a jar now, which is just better. A side effect of this is:
2. Arguments to SmartSpawnClient changed but only slightly:

function SmartSpawnClient(remote_path, root, params: string; width, height: integer; initseq, useragent, javaargs: string): integer;

The first five arguments are required, the last three can be left as empty strings.
• initseq should be 's' to start in Safe Mode
• useragent can set a specific useragent for SMART to use if you're paranoid
• javaargs are anything you want to pass to java.exe (e.g. max memory settings or other command line args). N.B. this isn't implemented for linux (yet) but most everyone uses windows or wine on linux (which is the same as windows as far as SMART is concerned).
3. Uses the same spawning/pairing scheme as v7.2 so there won't need to be a rewrite of the code that manages SMART in SRL (with the exception of the argument change mentioned above). In-process functionality is removed in this version, but it is far inferior to out-of-process functionality anyway.
4. Other rendering modes work now with the caveat that only Safe Mode will provide color data to Simba (as has always been the case). Along with that, and in preparation for a possible future where other rendering modes can provide color data, there is a new element on the GUI that lets you select the running mode (SafeMode is default). This does, however, let you run OpenGL mode in SMART so that you can use interception, which could mitigate the need for color information anyway.
5. Significant performance enhancements specifically for image transfer. It's at least 2x as efficient now using new functionality in Java 6 (since RS requires that you use it, anyway). Speed improvements for debug image and initialization as well.
6. FPS bar no longer introduces lag in the client and only controls the rate at which SMART updates Simba's image buffer. The default should be fine for everyone, and as a side effect RS loads MUCH faster now.
7. Pairing immensely more stable compared to v7.2, which was a nice test run, but didn't work as well as I expected on windows. All bugs related to trying to pair to already paired clients and leaving zombie processes SHOULD have been fixed. (Thanks to Brandon for testing all this on an actual windows machine for me.) Further, the pairing logic is simplified, streamlined, and just better in general.
8. Numerous other (trivial) bugfixes so this SMART should be the most stable out there. Apologies for my accelerated development/release schedule (I feel like I pulled a Mozilla), but everything should be good now.

Source: https://github.com/BenLand100/SMART
Binaries: https://github.com/downloads/BenLand100/SMART/SMARTv8.0.zip

Sweet! Was awaiting this release!

Thanks!

Thank you BenLand, great updates and summaries for everything you have done :).

You are a God amongst men.

great updates!

Significant performance enhancements specifically for image transfer. It's at least 2x as efficient now using new functionality in Java 6 (since RS requires that you use it, anyway). Speed improvements for debug image and initialization as well.

there have been issues with java 7 and smart in the past, i see you are still developing it in java 6? or was that a typo? if not, what are your future predictions on java 7 compatibility.

Has anyone else tried to update and run a script, then got this?

[Error] C:\Simba\Includes\SRL/SRL/Misc/SmartParams.Simba(268:134): Invalid number of parameters at line 267

He already said the parameters are different. If you're going to test, edit SmartParams.simba and remove -1 at line 268.

Also Java 7 works fine. Only thing is smart will annoy the hell out of you because it'll keep grabbing focus (On Java 7). That being said, if you're already on 6, stick to it.

And Ben whenever you get some time, whichever you check first (Git or Here), see my comment on the mouse thing. Just got home to test it and saw this thread.

Oh and for debugging, Smart has it's own console so you can see what it's doing (It's a java console.. Java.exe).

Nice update man! :)

From: Brandon
He already said the parameters are different. If you're going to test, edit SmartParams.simba and remove -1 at line 268.

Also Java 7 works fine. Only thing is smart will annoy the hell out of you because it'll keep grabbing focus (On Java 7). That being said, if you're already on 6, stick to it.

And Ben whenever you get some time, whichever you check first (Git or Here), see my comment on the mouse thing. Just got home to test it and saw this thread.

Oh and for debugging, Smart has it's own console so you can see what it's doing (It's a java console.. Java.exe).

Sorry, I knew I had to change something to do with parameters but I'm a newbie. Thanks. :redface:

Edit: Forgot to actually thank you for the update, so thank you BenLand!

From: Brandon
And Ben whenever you get some time, whichever you check first (Git or Here), see my comment on the mouse thing. Just got home to test it and saw this thread.

I believe I fixed it, if not I'll have to reupload binaries again. Regardless, if you downloaded before now, redownload.

From: x[Warrior]x3500
there have been issues with java 7 and smart in the past, i see you are still developing it in java 6? or was that a typo? if not, what are your future predictions on java 7 compatibility.

The 'issues' weren't compatibility issues, they were the result of botched java installs or otherwise different setups that could have been fixed by specifying th jvm path. That's no longer an issue because SMART will use whatever java.exe is on the path. Java is always backwards compatible, though things might be slightly different. It has always worked on Java 7 for me, but if I compile it with Java 7, no previous versions would be able to run it.

I'm back. This is looking great. Time to get simba setup again.

Does this mean we should all update to SMART v8 and how do you do that? Anyways, thank-you for all your work BenLand100!

excellent news!

From: BigFate
Does this mean we should all update to SMART v8 and how do you do that? Anyways, thank-you for all your work BenLand100!

Download the binaries that are attached to the first post. Move them to C:\Simba\Plugins

anyway to disable the command prompt?
btw great work on the performance enhancement. went from 10-14% to 2-4%

I'm looking forward to trying out OGL/DX interception with this.
Nice work Ben, you are the man. :thumbsup: Keep up the amazing work. <3

From: mormonman
I'm back. This is looking great. Time to get simba setup again.

YAY :)

Edit: I got it working but there seems to be something wrong with the mouse. It's moves to the spot I want it to go but then when going to click it moves to another spot, well that's what it seems like.

Nice work Benland..

Nice work BenLand. I'll give this a try later on today

From: Jakkle
I'm looking forward to trying out OGL/DX interception with this.
Nice work Ben, you are the man. :thumbsup: Keep up the amazing work. <3


YAY :)

Edit: I got it working but there seems to be something wrong with the mouse. It's moves to the spot I want it to go but then when going to click it moves to another spot, well that's what it seems like.

You had to redownload it. After I posted, he fixed it.

Very nice work Ben! Keep up the amazing work, everyone here is so thankful for everything you do and contribute to this community. Cheers! :D

Damn Ben, you did great pal. This is very much appreciated! :thumbsup:

Edit:
Is there a variable we change when loading this SMART that allows it to load up in other modes apart from SafeMode? Also, are we able to change modes once the client has already loaded? My SMART seems to freeze when I try to do so.

From: Brandon
You had to redownload it. After I posted, he fixed it.

I downloaded it just after I posted earlier, that's surely after you posted? :unsure:


Edit: I downloaded the source and compiled it my self and it works now :) Obviously the download link for the binaries is out dated.
Would be nice if you could update that please Ben.

From: Flight
Damn Ben, you did great pal. This is very much appreciated! :thumbsup:

Edit:
Is there a variable we change when loading this SMART that allows it to load up in other modes apart from SafeMode? Also, are we able to change modes once the client has already loaded? My SMART seems to freeze when I try to do so.

It's not frozen it's just the FPS is at 0.3xxxxxxx……….

I don't think that feature is complete. Well maybe not for windows.

Thank you Benland100 for these updates! we wubz you

From: Brandon
It's not frozen it's just the FPS is at 0.3xxxxxxx……….

I don't think that feature is complete. Well maybe not for windows.

Oh darn… That's okay, atleast we have the performance upgrade. :) Perhaps another day we'll be able to use SMART Software/OGL/DX modes, and I surely look forward to that.

Edit:
By the way, taking the 's' out of the parameters makes no difference incase anyone was wondering.

DirectX doesn't feeze when I use the drop down list on the smart window but software mode and OGL both freeze.

From: Flight
Oh darn… That's okay, atleast we have the performance upgrade. :) Perhaps another day we'll be able to use SMART Software/OGL/DX modes, and I surely look forward to that.

Edit:
By the way, taking the 's' out of the parameters makes no difference incase anyone was wondering.

The S makes a difference. It'll force safemode so that it doesn't show that thing that says "Auto something" about graphics.. you know.. That button that you get when you load RS normally after being in safemode. It covers the login screen so you can't login until you press leave alone or auto setup or something.

That's what the S does on my windows comp.

@The DX for Jakkle.. Weird..

Do we have to install this update manually or does it come with SRL update option inside simba?

Even after changing to

Result:= SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '');

on line 277 of SmartParams, I still get

[Error] C:\Simba\Includes\SRL/SRL/Misc/SmartParams.Simba(268:134): Invalid number of parameters at line 267

But line 267 is just an "end;", any ideas?
I'm sorry for having to ask.

From: Fruit
Has anyone else tried to update and run a script, then got this?

[Error] C:\Simba\Includes\SRL/SRL/Misc/SmartParams.Simba(268:134): Invalid number of parameters at line 267

Open SRL/SRL/Misc/SmartParams.Simba and change line 277
Result:= SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '', -1);

into this:
Result:= SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '');

edit: make sure you got the latest updates when you do this and i am using jdk704, hope it helps

Where can I get the non-buggy version? All my scripts are messing up atm as described here: http://villavu.com/forum/showthread.php?t=87817 .
I downloaded from the link that is in the 1st post. I have reinstalled Simba, jdk, java, deleted the -1 etc, also, when I revert to v7.2 things work fine for me.
Can I manually change whatever is wrong?

One thing I have noticed (Not a major issue) if if you have SMART at the bottom of your screen (just above the task bar) and you go to change the GFX mode (From Safe Mode to anything) the dropbox will go under the client

Got it off his Binary and it has the mouse bug still.
Mat

Compile it then..

You guys should get used to compiling smart so when you can test and help out whenever: http://villavu.com/forum/showthread.php?t=86387

From: Mat
Got it off his Binary and it has the mouse bug still.
Mat

Have you tried compiling your own plugins?

From: Brandon
Compile it then.. The zip file wasn't updated..

My plugins folder for the lazy: http://www.mediafire.com/?5okh4o3riqrkyon

Scan it if you like. You guys should get used to compiling smart so when you can test and help out whenever: http://villavu.com/forum/showthread.php?t=86387

I downloaded the zip file and my Smart 8.0 is working fine.. no mouse bugs?

From: [J]ustin
Have you tried compiling your own plugins?


I downloaded the zip file and my Smart 8.0 is working fine.. no mouse bugs?

Then I have no clue.. It says both were updated 17 hrs ago which is fine. I also downloaded the zip. Not sure why those guys are having that problem.

https://github.com/downloads/BenLand100/SMART/SMARTv8.0.zip

It's wired, Ben's Binary loaded with bug, Justin sent me his plugins stopped spawning client, I tried Brandon's and worked like a charm.
Wired.
But Thank Brandon <3 +Rep :)
Mat
E:Is it me or is it alot more CPU hungry? than 7.2?

From: Mat
It's wired, Ben's Binary loaded with bug, Justin sent me his plugins stopped spawning client, I tried Brandon's and worked like a charm.
Wired.
But Thank Brandon <3 +Rep :)
Mat
E:Is it me or is it alot more CPU hungry? than 7.2?

Could you please forward the plugins to me too? PM-d you about it.
E: Brandon's plugins do indeed work! Anyone else who has this problem, this seems to be the solution atm.

E2: you're not the only one with the CPU problem. On my case it went from 18-22% to 29-32% :(

From: l6bustank
Could you please forward the plugins to me too? PM-d you about it.
E: Brandon's plugins do indeed work! Anyone else who has this problem, this seems to be the solution atm.

E2: you're not the only one with the CPU problem. On my case it went from 18-22% to 29-32% :(

Same here. It rise when I upgraded from 6.10 to 7.2 till now.

But the link Brandon posted is the same link that's on the first post… There's no way they are different.

Also, if your CPU usage is higher than before there are two possible reasons:
1) RS is using more CPU now
2) The image transfer is running faster than it used to due to performance enhancements and you should turn it down with the FPS bar.

E: Rebuilding the plugins on github just in case. Since it's the same link your browser might not redownload it because it thinks it's the same file (if you downloaded it before). You could have to restart it.

From: BenLand100
But the link Brandon posted is the same link that's on the first post… There's no way they are different.

Also, if your CPU usage is higher than before there are two possible reasons:
1) RS is using more CPU now
2) The image transfer is running faster than it used to due to performance enhancements and you should turn it down with the FPS bar.

E: Rebuilding the plugins on github just in case. Since it's the same link your browser might not redownload it because it thinks it's the same file (if you downloaded it before). You could have to restart it.

I meant the CPU usage in comparison with the rates I had with 7.2. I Moved the fps bar all the way down til it went to 2-5 fps i think and still it uses more CPU :'( … I'm back on 7.2 atm and i have usage around 20%.

Just got v8.0 working and so far the client itself works great!

I do have some questions though. Is there any way to hide the console window that comes up with SMART (not the one with Simba)? Also is there any way to have all the SMART windows as one "icon" on your task bar. Ex:

|
|
V

It used to just have one icon, with all the windows under it while running multiple SMARTs. Not really a big issue, but annoying if running 4-5 SMARTs at once.

Last question is, can somebody explain User Agents to me more? Can they easily be implemented to use with Simba/SMART? This question can be answered in PM if it would be considered spam on this thread. Sorry if I'm annoying :p

But again, v8.0 works great and I haven't had any performance issues with it at all yet. I'll be sure to post if I find anything work posting about. Great work!

Ty Benland, going to test it with some resource heavy script.

Brandon is there a way you can let me borrow your WF script? :P

From: Austin
Just got v8.0 working and so far the client itself works great!

I do have some questions though. Is there any way to hide the console window that comes up with SMART (not the one with Simba)? Also is there any way to have all the SMART windows as one "icon" on your task bar. Ex:

|
|
V

It used to just have one icon, with all the windows under it while running multiple SMARTs. Not really a big issue, but annoying if running 4-5 SMARTs at once.

Last question is, can somebody explain User Agents to me more? Can they easily be implemented to use with Simba/SMART? This question can be answered in PM if it would be considered spam on this thread. Sorry if I'm annoying :p

But again, v8.0 works great and I haven't had any performance issues with it at all yet. I'll be sure to post if I find anything work posting about. Great work!

http://en.wikipedia.org/wiki/User_agent

My mouse is working good with your new version Ben.

If the entire process is using more processor power, it's likely because RS is running at full speed due to the FPS bar no longer inducing lag. Inducing lag was causing problems. I do know for a fact that SMART itself is using less power, though you have to remember the RS client is running inside it.

I did a quick test. I loaded Runescape in my normal web browser (Google Chrome) and then loaded it up in SMART and there is quite an increase of cpu usage from Java.exe when using SMART.
When using the normal web browser windows resource monitor says the average cpu usage is 28.##
When using SMART it says the average cpu usage is 55.##.
Would you say SMART should be using that much more than a normal web browser ?

Edit: Also I thought that when disabling SMART the Tab thing had been fixed ?

I found to reduce it I set RS to use very little CPU and disabled graphic's allows me to run 5 acc's 4 are on that setup and other is maxed cpu as i need it for testing.
and I am at 70 % CPU but does change alot, its a lot better than with 4 at 100% cpu.
Mat

From: Jakkle
DirectX doesn't feeze when I use the drop down list on the smart window but software mode and OGL both freeze.

I'm trying to get DirectX to work for me as it uses way less CPU on my computer but anything besides software mode will freeze up on me. Is there something I have to do first before DirectX will work?

From: redwall777
I'm trying to get DirectX to work for me as it uses way less CPU on my computer but anything besides software mode will freeze up on me. Is there something I have to do first before DirectX will work?

From what I heard Windows users can only use Safe mode with SMART, no other. I'm not for sure if this is permanent or not but for now that's the way it is pal.

From: redwall777
I'm trying to get DirectX to work for me as it uses way less CPU on my computer but anything besides software mode will freeze up on me. Is there something I have to do first before DirectX will work?

You would need to be using DXinterception for it to do anything as SRL doesn't work with that mode.

To get it working tho I Select DX to be used in runescapes setting, while smart is in safemode. Then the screen (RS in SMART) flickers black for me and after I see that happen I change SMART to DX.

Edit: seems to work for OGL to. Just change the setting in Runescape before you change the one on SMART.

From: Jakkle
You would need to be using DXinterception for it to do anything as SRL doesn't work with that mode.

To get it working tho I Select DX to be used in runescapes setting, while smart is in safemode. Then the screen (RS in SMART) flickers black for me and after I see that happen I change SMART to DX.

Edit: seems to work for OGL to. Just change the setting in Runescape before you change the one on SMART.

So how do you implement DXinterception?

From: Flight
From what I heard Windows users can only use Safe mode with SMART, no other. I'm not for sure if this is permanent or not but for now that's the way it is pal.

still using safe mode via official rs client on win7 :/

From: Austin
So how do you implement DXinterception?

afaik, there's no DXI built into simba, yet. There's been progress in various threads (such as Mato's) on building plugin's for it, however it remains incomplete (on Mato's thread). But like Jakkle said, you can use DX mode in RS with S.M.A.R.T. 8.0

From: Le Jingle
afaik, there's no DXI built into simba, yet. There's been progress in various threads (such as Mato's) on building plugin's for it, however it remains incomplete (on Mato's thread). But like Jakkle said, you can use DX mode in RS with S.M.A.R.T. 8.0

From: Flight
From what I heard Windows users can only use Safe mode with SMART, no other. I'm not for sure if this is permanent or not but for now that's the way it is pal.

Yeah I'm a Windows user and have SMART v8.0 and I can't go into DirectX, tried using Jakkle's method posted above to do it. I usually play in DirectX on normal RS, and the performance improvement is great. So that sucks that Windows users can't use it atm. Hopefully we can use it easily in the future.

Getting a strange error:

[Error] E:\Programs\Simba\Includes\SRL/SRL/Misc/SmartParams.Simba(268:134): Invalid number of parameters at line 267
Compiling failed.

The only thing on line 267 is - end;

EDIT: Just to clarify, this is on the SmartParams.simba

From: Austin
I do have some questions though. Is there any way to hide the console window that comes up with SMART (not the one with Simba)? Also is there any way to have all the SMART windows as one "icon" on your task bar. Ex:
|
|
V
It used to just have one icon, with all the windows under it while running multiple SMARTs. Not really a big issue, but annoying if running 4-5 SMARTs at once.

Google this program: 4t Tray. You can minimaze windows to tray.

Anyways, nice work Ben. Thanks for your amazing work! :)

Anyone else facing crash on SMART 8.0 loadup when you run simba thru WINE ?

Wow Ima give this thing a try as soon as possible!
Thank you!

Issue one : How do i turn off the Java Command window ?

Question : Will Smart finally close it's instance and clear out the ram when it reboots itself ?
Another question : Is it possible to run Smart as smartremote ? And how :)

Sorry if the questions seem stupid but I really liked being able to pin the process to my taskbar.

From: msemtex
Getting a strange error:

[Error] E:\Programs\Simba\Includes\SRL/SRL/Misc/SmartParams.Simba(268:134): Invalid number of parameters at line 267
Compiling failed.

The only thing on line 267 is - end;

EDIT: Just to clarify, this is on the SmartParams.simba

I'm getting the same error as this, except it says line 273 for me and there's just an "end;" statement. I'd really appreciate it if someone could help because I think I've tried everything, updated numerous times, downloaded all the required plugins and S.M.A.R.T. files, uninstalled/reinstalled numerous times and I'm still getting that error. I may have updated something wrong because my SmartParams.simba seems to be different, I don't get
"Result:= SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '', -1);" until line 285, but I've donwloaded everything from the official posts and v8.0 from Ben…so I'm not sure what the dealio is.

Go to line 285 (the one you had that "Result:= SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '', -1)" on) and change it to

Result:= SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '')

Save SmartParams.simba and then close it. Do NOT try to run it.

This should have fixed your error.

Thanks for this! I was wondering why SMART 8.0 wasnt running anything until I saw this - I was using 7.2 lol.

From: P1ng
Go to line 285 (the one you had that "Result:= SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '', -1)" on) and change it to

Result:= SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '')

Save SmartParams.simba and then close it. Do NOT try to run it.

This should have fixed your error.

Awesome, thanks! I had tried this before but never saved, I guess that was the problem? Yeah that fixed the SmartParams error but now I have this:
Error: Out Of Range at line 285
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap]

helpz plzzzzzzz :)) (the more z's I add the more people want to help).

From: Barokajin
Awesome, thanks! I had tried this before but never saved, I guess that was the problem? Yeah that fixed the SmartParams error but now I have this:
Error: Out Of Range at line 285
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap]

helpz plzzzzzzz :)) (the more z's I add the more people want to help).

Just try running the script again. Not sure why, but this happened to me this morning. The only thing I can think of that caused this for me is that I installed java 7.

From: Fruit
Just try running the script again. Not sure why, but this happened to me this morning. The only thing I can think of that caused this for me is that I installed java 7.

Yeah that was weird, maybe I should try using Java 6? Seems like there are a lot of problems with 7. Thanks for all the help guys. ^-^

wtf is this? They get created every time I run smart(I only run 1, I don't use multiple smarts/accounts)
*this is a clean install of simba + latest updates with smart v8… ignore unins000.dat

And also I am having an odd issue, 1st time running smart the game runs perfectly, but after the 2nd time(stopping script, then trying it again or a different script) causes runescape to run slowly as if the Bar of the right side were almost down lowest… and by the moving it all the way to the top doesn't even changes the speed it stays slow(but putting it entirely down, does make it slower). I have to restart the computer so it runs again normally… but after the 1st run it happens again.

So any help on both? This only happens to me since using this new smart
cpu & memory usage is perfectly fine - I just have no idea what is causing it

I tend to get quite a few SMART files too. Just close simba and smart, then delete them. Although they might only be temporary anyway, I just like to keep my folder neat.
I think it might have something to do with pairing with more than one client after stopping a script and starting again or having more than one script running at a time.

No, I get the same issue arising as blinkblink and I only run 1 client at a time.

P1ng, do you ever stop the script and then start it again? That is the other thing that I was thinking might cause multiple smart files being created.
Usually I only have one client open at once.

From: Fruit
P1ng, do you ever stop the script and then start it again? That is the other thing that I was thinking might cause multiple smart files being created.
Usually I only have one client open at once.

My post & his post says what we do… which means what you just posted lol
We use only 1 Smart, stop & start again the script.. or change to a different script.

It is not normal that those files are getting created and actually staying there… instead of being like a temp file which gets erased after ending its usage.

From: blinkblink
My post & his post says what we do… which means what you just posted lol
We use only 1 Smart, stop & start again the script.. or change to a different script.

It is not normal that those files are getting created and actually staying there… instead of being like a temp file which gets erased after ending its usage.

Hey I'd like to know a solution to the problem too ya know, no need to treat me like an idiot.
For me though, I don't notice any difference in performance after stopping and restarting a script.

From: Fruit
Hey I'd like to know a solution to the problem too ya know, no need to treat me like an idiot.
For me though, I don't notice any difference in performance after stopping and restarting a script.

Then you are an idiot, since you called your self one - I didn't lol
I was referring to the top part of my post(screenshot).. not the 2nd part since its not related to the same issue.

From: blinkblink
Then you are an idiot, since you called your self one - I didn't lol

There's no need for this back and forth, instead, how about we work together to find a solution ;)

From: BenLand100
Hello all, it's time for a major revision bump due to some pretty significant changes and improvements.
Say hello to v8.0 (needs Simba 0.99 or later), but first, some things worth pointing out:

1. Java must be on your path now, since the new out-of-process launching method that made most of the improvements possible uses java.exe directly. Look up a guide to add java.exe to your path if you're not sure how. As a result, only the plugin for Simba needs to be a compiled library now (along with native methods for the Java side), and most of SMART is in a jar now, which is just better. A side effect of this is:
2. Arguments to SmartSpawnClient changed but only slightly:

function SmartSpawnClient(remote_path, root, params: string; width, height: integer; initseq, useragent, javaargs: string): integer;

The first five arguments are required, the last three can be left as empty strings.
• initseq should be 's' to start in Safe Mode
• useragent can set a specific useragent for SMART to use if you're paranoid
• javaargs are anything you want to pass to java.exe (e.g. max memory settings or other command line args). N.B. this isn't implemented for linux (yet) but most everyone uses windows or wine on linux (which is the same as windows as far as SMART is concerned).
3. Uses the same spawning/pairing scheme as v7.2 so there won't need to be a rewrite of the code that manages SMART in SRL (with the exception of the argument change mentioned above). In-process functionality is removed in this version, but it is far inferior to out-of-process functionality anyway.
4. Other rendering modes work now with the caveat that only Safe Mode will provide color data to Simba (as has always been the case). Along with that, and in preparation for a possible future where other rendering modes can provide color data, there is a new element on the GUI that lets you select the running mode (SafeMode is default). This does, however, let you run OpenGL mode in SMART so that you can use interception, which could mitigate the need for color information anyway.
5. Significant performance enhancements specifically for image transfer. It's at least 2x as efficient now using new functionality in Java 6 (since RS requires that you use it, anyway). Speed improvements for debug image and initialization as well.
6. FPS bar no longer introduces lag in the client and only controls the rate at which SMART updates Simba's image buffer. The default should be fine for everyone, and as a side effect RS loads MUCH faster now.
7. Pairing immensely more stable compared to v7.2, which was a nice test run, but didn't work as well as I expected on windows. All bugs related to trying to pair to already paired clients and leaving zombie processes SHOULD have been fixed. (Thanks to Brandon for testing all this on an actual windows machine for me.) Further, the pairing logic is simplified, streamlined, and just better in general.
8. Numerous other (trivial) bugfixes so this SMART should be the most stable out there. Apologies for my accelerated development/release schedule (I feel like I pulled a Mozilla), but everything should be good now.

Source: https://github.com/BenLand100/SMART
Binaries: https://github.com/downloads/BenLand100/SMART/SMARTv8.0.zip

Where is the download link?

From: Autopsy
Where is the download link?

can you see in the post you quoted the blue underlined url's next to one of them it says source and next to the other it says binaries. Click on the binary link as the source you will have to compile yourself.

I extracted them to the Plugin folder. But SMART won't load. Is this because of the whole "Java.exe must be in your path" thing? Not very noobie friendly, I tried looking for a guide but in all honesty I don't even know what I'm looking for!

Here's my thread. If you have time to give me a hand.

http://villavu.com/forum/showthread.php?t=88553

Upon reloading (use of sixhourfix), is there any reason the smart client should flicker/flicker and delay temporarily? Or would this be a personal error?

(the fix works great - but I notice every here and there, the smart screen with rs loaded will flicker and pause [the connection?] the scripts actions, but then resume shortly after)

The client is very laggy for me. Apparently it is only what the client is displaying and not actually runescape. When I run my scripts they work fine and runescape has constant 50 fps, but the refresh rate on SMART is horrible. Any fix to this?

From: Total
The client is very laggy for me. Apparently it is only what the client is displaying and not actually runescape. When I run my scripts they work fine and runescape has constant 50 fps, but the refresh rate on SMART is horrible. Any fix to this?

The raise bar on the right side of smart.

Doesn't work. Still very laggy…like max 5 FPS. If I move the slider up/down repeatedly quickly it becomes smooth 50 fps though.

Thank you for the great updates!

This is a really stupid question, but I haven't been on in a while and now I'm just returning, so I just updated everything in simba. Now when I run a script, I get the error:
Exception in Script: Unable to find file 'SRL/SRL/Misc/Smart.simba'

I'm assuming this is because the new files in the folder are renamed, since there's a new change to function SmartSpawnClient. Where is this function though, because I tried searching SmartSpawnClient on all of the simba files in Simba/Includes/SRL/SRL/Misc and nothing seems to have it…

After using Smart v8 for a week or so…Here's the two issues I'm coming across.

It loves trying to be the active window (On top), when minimizing it it loves coming ontop again (Or flashes instead).

And when typing while a script is going, sometimes not all the keystrokes go through.

From: Wyn
It loves trying to be the active window (On top), when minimizing it it loves coming ontop again (Or flashes instead).

AFAIK, that is because you are using Java 7, using Java 6 eliminates this problem.

From: abu_jwka
AFAIK, that is because you are using Java 7, using Java 6 eliminates this problem.

>.>

Time to go downgrade…

You don't have to downgrade because you can have both version 6 and 7 installed.

Good release, uses an average of half the cpu power per instance (vs 7.2), same script(s) standing still, haven't benchmarked running around yet

running java7 and windows7 on all tests btw

seems to be about half the cpu usage for running too, however runescape is tarded when it comes to using my graphics so it's hard to test it.. sometimes it uses my gpu sometimes it uses my cpu to render the graphics? (this is only while running) uhh derp.. also it's runescape not smart doing that..

I am not sure if this is a Smart issue or a Java issue but when I try and type in the chat box, there is a huuuuuuuuge delay before it lets me. As soon as the first letter appears (which can take maybe 15 seconds) it lets me type normally. But then when I am done it goes back to taking a long time. I guess this is a known issue. Any help?

From: Valeyard
I am not sure if this is a Smart issue or a Java issue but when I try and type in the chat box, there is a huuuuuuuuge delay before it lets me. As soon as the first letter appears (which can take maybe 15 seconds) it lets me type normally. But then when I am done it goes back to taking a long time. I guess this is a known issue. Any help?

What processor are you on?

If simba and smart have only one thread, they'll probably be running themselves before they allow text input to go through, this means it's cached so if you typed and pressed enter it would go through whenever it's sent through the processor

same deal with other processors that aren't single threads, however less likely the more threads you have..

smart seems to be pretty fast with text these days, especially vs what it was a year or more ago

From: grats
What processor are you on?

If simba and smart have only one thread, they'll probably be running themselves before they allow text input to go through, this means it's cached so if you typed and pressed enter it would go through whenever it's sent through the processor

same deal with other processors that aren't single threads, however less likely the more threads you have..

smart seems to be pretty fast with text these days, especially vs what it was a year or more ago

Hmm, using a first gen i7 860. So that probably shouldn't be an issue.

I should note that I have just upgraded from SMART 7.2 in which it would let me type straight away BUT sometimes characters wouldn't…register, as if it couldn't detect the keypresses sometimes.

From: Valeyard
Hmm, using a first gen i7 860. So that probably shouldn't be an issue.

I should note that I have just upgraded from SMART 7.2 in which it would let me type straight away BUT sometimes characters wouldn't…register, as if it couldn't detect the keypresses sometimes.

Sounds like a java issue O_o

if you're on windows 7, java7 seems to be working ok I would uninstall all javas and make sure they're deleted, and then reinstall 1 of them

java has never really ran that well, and it's getting worse lol

especially because the smart is working fine on multiple instances / OS's for me, it narrows it down to a java or maybe your OS is just running slow type of issue..

From: grats
Sounds like a java issue O_o

if you're on windows 7, java7 seems to be working ok I would uninstall all javas and make sure they're deleted, and then reinstall 1 of them

java has never really ran that well, and it's getting worse lol

Thanks.

Gah, I had to downgrade from Java 7 at a previous date because the SMART window keeps grabbing focus, that is an issue that is mentioned earlier in the thread.

I am not sure if there is a happy medium here :(

Yea, it used to do that for me too.. now it just flashes yellow and only grabs focus from pidgin (http://pidgin.im) other than that I haven't seen anything lose focus, no games, no browsers etc

If I disable SMART, start typing, enable it then it will let me type, but only if I don't take too long between sentences.

Unsure whether I should go back to Java 7 and hope that SMART 8 doesn't grab the focus from everything. Or stick to Java 6 and go back to SMART 7.2 and hope I can type.

I just installed Java 7 alongside Java 6. The typing problem has (seemingly) completely vanished. But now I am stuck with the problem of SMART grabbing focus whenever it "clicks".

Does this help narrow down the problem?

EDIT1: I had been using the last revision of Java 6 - 35. I am now using an earlier one, 30, and (fingers crossed) seems to be no focus OR typing problems. Will update post accordingly in time.

Haha spoke to soon, apparently that typing issue is still there. If anyone is reading this and is using some version of Java 6, and has no issues, please tell me which version it is - thanks.

It works fine UNTIL I minimise the smart window. When I then bring it back up, thats when I need to wait forever to type. But once it lets me, it works ok until the screen is minimised again.

I cant figure out how to update to v8.0 from v7.2, anyone wanna post step by step how to update it so SMART will actually load? Thanks

From: Mink
I cant figure out how to update to v8.0 from v7.2, anyone wanna post step by step how to update it so SMART will actually load? Thanks

Close Simba, find your Simba\Plugins folder, download the .zip from the original post, unzip/copy the downloaded files into - as well as replace - the current files in the Simba\Plugins folder. Open simba + start smart, make sure you are running simba v.990 or later too.

EDIT:
Simba 0.99 dl, http://villavu.com/forum/showthread.php?t=85725
Also note that this smart version, 8.0, also supports java 7

Thanks, I'll try in the morning

I'm trying to download the source from github to compile it myself. When I download the ZIP file, the name of it is BenLand100-SMART-v7.1-28-g8d5ba90 plus when I extract it there is only one make file and no Smart/Remote to find a make file for smart remote. Is it me or what, am I missing something ??

The makefile can build the whole thing. In v8.0 there is only the main source tree and it's all remote, it no longer has the remote wrapper. Run `make` in the root folder to see build options.

From: BenLand100
The makefile can build the whole thing. In v8.0 there is only the main source tree and it's all remote, it no longer has the remote wrapper. Run `make` in the root folder to see build options.

Okay cool. It must have been me setting up the compiler wrong, but it wouldn't build it properly and was giving errors. Anyway I see there is 8.1 now so I'm going to give that a try :)

Edit: Just tried to compile it and this is what I get

From: Jakkle
Okay cool. It must have been me setting up the compiler wrong, but it wouldn't build it properly and was giving errors. Anyway I see there is 8.1 now so I'm going to give that a try :)

Edit: Just tried to compile it and this is what I get

You can't compile with java 1.7

From: mormonman
You can't compile with java 1.7

Ahhhhaaa thought it was ok to use java 7 now, my bad :duh:. Thanks alot for the reply mormonman :)

Edit: I've compiled 8.1 and it's working fine so far :).
I had to change the SmartParams.simba to add the extra parameter for plugins.

Result:= SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '', '');

Just add an extra , '' at the end :p

I had a problem loading smart when upgrading from 7.2 to 8.0

When SmartSpawnClient was called a console window briefly appeared stating:

Error: Could not find or load main class Files.Simba.Plugins..smart.jar

In the simba console this showed as "unable to spawn smart client" or some such.

I had my simba folder in "C:\program files\" so based on the error message I assumed that the package path to smart was getting cropped at the space in "program files".

Moving simba onto a path with no spaces in allowed the package path to resolve correctly and smart loaded fine.

I'd rather be able to store simba in "program files" so maybe this is a bug that could be fixed? If not, I hope this is informative for anyone else with this error.

OMG, why didn't I upgrade before? Way faster, doesn't take so much resource, actually kills process + love the pairing feature.

But one thing, when I use 6 hour fix then looks like Simba doesn't free memory every time, it was 1,1gb today! How come it went so high? Usually when i start it only takes 65mb, atm I checked and 155mb, how/why?

From: neeger
OMG, why didn't I upgrade before? Way faster, doesn't take so much resource, actually kills process + love the pairing feature.

But one thing, when I use 6 hour fix then looks like Simba doesn't free memory every time, it was 1,1gb today! How come it went so high? Usually when i start it only takes 65mb, atm I checked and 155mb, how/why?

Memory leaks…

From: shadowfx
Memory leaks…

So my script is bs? Might be DTMs maybe? Scipt is simple, withdraws 2 DTMs from bank and uses one to other(herblore).

From: neeger
So my script is bs? Might be DTMs maybe? Scipt is simple, withdraws 2 DTMs from bank and uses one to other(herblore).

memory leak doesn't mean memory leak in your script.

From: footballjds
memory leak doesn't mean memory leak in your script.

So what might cause the problem? anyone else have same issue with Simba, imo I didn't had it when i had SMART 7.2, but not sure, didn't use sixhourfix also.

Anybody get SMART 8.0 working on Windows Xp (or even try)?

When I try it on Xp I get the dreaded "cannot spawn" error. Exact same setup (literally) works on Windows 7. Java is in the path.

post the screenie of the console window, only then can we tell what is wrong

From: Bixby Sayz
Anybody get SMART 8.0 working on Windows Xp (or even try)?

When I try it on Xp I get the dreaded "cannot spawn" error. Exact same setup (literally) works on Windows 7. Java is in the path.

is it x86?

How do i replace 7.2 with this?

Ok guys. So I go to run MSI, GE yew cutter. It opens up SMART8 then just sits there. I need help because I've tried uninstalling and reinstalling Simba multiple times and updating everything.

msi doesnt work try another script

So I tried ashamans herblore script and I have the same problem. I still don't get it. :/

From: Firestar2293
So I tried ashamans herblore script and I have the same problem. I still don't get it. :/

Did you do this?
http://villavu.com/forum/showthread.php?t=60510

Yeah, I had everything the way it's supposed to be. I don't get what changed but it's working now. Thanks for helping guys I guess. xD

Kinda off topic, are there plans to replace 7.2 with 8.0 in the near future ? Just so when doing a new install we can cut out the updating, and the need to help people with it so much,

Is there something 7.2 does that 8.0 doesent that i'm missing?

Got a warning from my antivirus saying trojan detected when I downloaded the file, it says "Trojan (Win32/Trojan.32c)" Is it normal?

From: newy1
Got a warning from my antivirus saying trojan detected when I downloaded the file, it says "Trojan (Win32/Trojan.32c)" Is it normal?

Yes, its normal.

From: newy1
Got a warning from my antivirus saying trojan detected when I downloaded the file, it says "Trojan (Win32/Trojan.32c)" Is it normal?

False positives happen all the time :P you'll learn this when working in areas like this, but you can trust the devs here :)

Compiled successfully in 842 ms.
SRL Compiled in 15 msec
** Smart Cannot Spawn Clients **
Successfully executed.

I'm getting the "Cannot Spawn Clients" error after attempting to upgrade to 8.0, and none of the suggestions I've seen from searching around have worked.

I downgraded my jre to 1.6u35, I have the 1.6u35 jdk, I open a blank Simba (as admin in compatibility for XP) before opening a script, my PATH is set correctly, I changed the scripts to {$define SMART8}, tried reinstalling Simba 0.99, tried re-downloading the smart 8 files, so on and so forth.

Anyone have any other advice? Everyone says that 8.0 is better than 7.2, but the frustration really isn't worth it.

If your running 64 bit java, try 32

From: DannyRS
If your running 64 bit java, try 32

I have 32 bit java on 32 bit Windows 7.

Tried running simba as admin and checked your java path?

From: Ashaman88
Tried running simba as admin and checked your java path?

From: Tlachtli
I downgraded my jre to 1.6u35, I have the 1.6u35 jdk, I open a blank Simba (as admin in compatibility for XP) before opening a script, my PATH is set correctly, I changed the scripts to {$define SMART8}, tried reinstalling Simba 0.99, tried re-downloading the smart 8 files, so on and so forth.

Yes, I have. I've tried everything that searching the forums could find.

Umm so maybe I am just an idiot but I can't figure out how to install smart 8.0… I have both the zip file and the unpacked version of that file. I understand that I am supposed to put it into the samba->plugins folder.

Which files is it supposed to replace exactly? Am I supposed to use the zip file or the unzipped version? Please forgive, none of this is obvious to me.

From: Scorched
Umm so maybe I am just an idiot but I can't figure out how to install smart 8.0… I have both the zip file and the unpacked version of that file. I understand that I am supposed to put it into the samba->plugins folder.

Which files is it supposed to replace exactly? Am I supposed to use the zip file or the unzipped version? Please forgive, none of this is obvious to me.

Always unzip, that's the rule for everything, once unzipped copy the unzipped contents (the things you just unzipped) into the folder destination and it will come up with "are you sure you want to replace" - say yes to all, then you see where it says $define_smart - something along those lines Im on my phone atm so can't remember fully at the end of smart) put an 8 there like this SMART8)

hope that helps

Let me just say, thanks for your reply. I understand everything you are saying and it has been entirely helpful. I am just missing one detail:

To WHERE do I save the contents of the "SMART-master" script? Am I supposed to replace the entire contents of the "plugins" folder? or a file within the plugins folder?

Thanks for your help, man.

From: Scorched
Let me just say, thanks for your reply. I understand everything you are saying and it has been entirely helpful. I am just missing one detail:

To WHERE do I save the contents of the "SMART-master" script? Am I supposed to replace the entire contents of the "plugins" folder? or a file within the plugins folder?

Thanks for your help, man.

Your supposed to replace all the files in the plugins folder that it asks you to.

I guess this has been asked before but what cause Smart 7.2 and 8.0 to want to be in front of everything.
Mat

From: Mat
I guess this has been asked before but what cause Smart 7.2 and 8.0 to want to be in front of everything.
Mat

I think that has to do with the Java version you're using. IIRC 1.6 doesn't do that but 1.7 does.

sorry if im just being dumb,,

but im stuck on how to update to smart8? it is still usin 7.2 to run scripts

ive downloaded the smart8 winrar

thanks

just extract to plugins folder and replace. don't forget the {$DEFINE SMART8} thing

Has anybody managed to get SMART 8 working on Windows Xp?

Endless " Failed to pair - No client by that ID" messages. Tried this on several xp machines, a couple fresh installs, different versions of java, etc. The same setup under Windows 7 works but does not work under Xp.

This is a pain: I usually run my scripts in a VM running Xp.

From: Bixby Sayz
Has anybody managed to get SMART 8 working on Windows Xp?

Endless " Failed to pair - No client by that ID" messages. Tried this on several xp machines, a couple fresh installs, different versions of java, etc. The same setup under Windows 7 works but does not work under Xp.

This is a pain: I usually run my scripts in a VM running Xp.

did you add java to your home/path variables in environment variables? Are you running smart and simba as admin?

From: footballjds
did you add java to your home/path variables in environment variables? Are you running smart and simba as admin?

Yeah tried all that. Nothing. Which makes me wonder what changed.

Does SMART support 2007 severs?

From: L B
Does SMART support 2007 severs?

Not officially yet, it can be edited to load it, but wait a few days and it will have support I bet :)

From: DannyRS
Not officially yet, it can be edited to load it, but wait a few days and it will have support I bet :)

Sweet!

I updated and everything but when I try to run a script, nothing shows up…I am trying to run an 07 script but I don't that should matter because I think I have the script set up correctly since It compiles. What do I do?!

Any support for 07 client users. Been attempting to change the SMARTparams to load the old school Rs page but in the source code of the new RS and the old only difference I can find is that old school doesn't use iFrame. I changed the path many times but still cant seem to get it to load old school webpage :D !

From: cvb0
Any support for 07 client users. Been attempting to change the SMARTparams to load the old school Rs page but in the source code of the new RS and the old only difference I can find is that old school doesn't use iFrame. I changed the path many times but still cant seem to get it to load old school webpage :D !

More than likely there won't be an official release for 07 SMART until after some time. Or another botting site brings out their own. For now just run scripts with 07 rs running on the website. It will still work fine that way.

Yeah I shouldn't keep wasting time trying to figure out what needs to be changed when I didn't make it but still there is like no anti random scripts you cant run the bot and leave your computer for very long rather bot while I can check it every 30 min or so doing other stuff.

From: Thanatos
More than likely there won't be an official release for 07 SMART until after some time. Or another botting site brings out their own. For now just run scripts with 07 rs running on the website. It will still work fine that way.

We've done all of the 07 include development using smart - it's pretty easy to have it load up.

Sorry what do you mean by this? The include is now added meaning only a specific part need to be changed to have it load the 07 page?

From: cvb0
Sorry what do you mean by this? The include is now added meaning only a specific part need to be changed to have it load the 07 page?

I mean the official 07 include will have smart load oldschool rs. I'm sure there will be an announcement once it is all done and everything

I feel kinda dumb right now but I don't really understand what to do, mostly part 2!

[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(282:145): Invalid number of parameters at line 281
Compiling failed.

I was prepared for a line 268 bug, not this. It's a blank line, below it it does have

Params := GetSmartParams;

. This is the first time I've tried updating smart, so what do I do?

And also, all guides I find on how to add java.exe to path don't make sense. How do I allow SMART to have java.exe on its path?

Invalid number of parameters at line 280. how do i fix this?

I am so angry on this new SMART 8 ,what am I doing wrong? I can not figure it out, everytime I press run scripts ,SIMBA start to load new SMART. I did not have this problem with older versions… :(

I have problem then i lunch few clients (same script worked well on v7.2) though now with v8.0 after 6hours restart (with sixhoursfix on) some of clients die. etc if i running 4 sometimes at morning i found only 1 or 2 working. *scripts are flawless* not sure it's smart it self or i missing something.. :? anyone?

Exception in Script: Unable to find file 'P07Include.Simba' used from 'C:\Users\Ryan's\Downloads\[07] Draynor Willow Banker [3.01].simba'
Error: How to fix?

Need help faaaaaasssst is it possible to run 2 smarts at once

Yes. :google:

:)

when i launch smart through a script from the forums it logs in just great, but when i execute my bot it still takes control of my mouse while smart is enabled, which is worse because it means the mouse cant even peform the click without me disabling it. tried reinstalling. halp

EDIT: i think its the script, woops.

program new;
{$DEFINE SMART8}
{$i srl/srl.simba}

begin
ClearDebug();
setupSRL();
end.

tried to run that and got this message in response:

Exception in Script: Operator expected at line 453, column 93 in file "C:\Simba\Includes\SRL\SRL\core\gametab.simba"

Help please?

When trying to load SMART8 for Old School RS, I get stuck on 'connecting to update server'.[ATTACH=CONFIG]19909[/ATTACH]
Anyone got any ideas?

hey! when i have typed in the 2 more lines it says like this:

[Error] (8:18): Assignment expected at line 7
Compiling failed.

Can you help me with that? and i can't find the link to the 2 more lines.

binaries download link broken?

i dident understand what code i must pasthe there ? :S how to run the client :S

The links are broken :/
EDIT: nvm, it's just GitHub that is down for the moment.
EDIT2: Seems like I don't get an error on google chrome while I get an error on FireFox. Weird stuff.

[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(281:149): Invalid number of parameters at line 280
Compiling failed.
I followed all the steps, installed everything, reinstalled simba and all the plugins and resetup everything but still get this error.
suggestions??

is their any way to make it pick a random world for 07?

From: owned ya
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(281:149): Invalid number of parameters at line 280
Compiling failed.
I followed all the steps, installed everything, reinstalled simba and all the plugins and resetup everything but still get this error.
suggestions??

+1, having same problem, any solution?

[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(293:131): Invalid number of parameters at line 292
Compiling failed.
You said something about removing the -1 on line 268. There was nothing on 268. I tried removing a -1 on line 294 but i still got the same error. Any ideas anyone? thanks

From: SkellyChip1
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(293:131): Invalid number of parameters at line 292
Compiling failed.
You said something about removing the -1 on line 268. There was nothing on 268. I tried removing a -1 on line 294 but i still got the same error. Any ideas anyone? thanks

Same problem here.

It errors on the second line of this:

  {$IFDEF SMART8}
  Result := SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 503, 's', '', '');
  {$ELSE}
  Result := SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 503, 's', '', '', -1);
  {$ENDIF}  

Smart appears to be failing for me today - It was fine when I last used it (two days a go) and have tried re-installing it twice, but I'm still getting the following errors: [Error] C:\Simba\Includes\SRL\SRL\misc\SmartParams.Simba(78:8): Unknown identifier 'RSReady' at line 77
Compiling failed.

Any help would be much appreciated.

[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(281:149): Invalid number of parameters at line 280
Compiling failed.

I have no Idea what this means, please help!

Is there a way to stop SMART popping on top.
Sometimes when script is started and I click Simba window SMART pops in front. Tis quite annoying

From: t4q
Is there a way to stop SMART popping on top.
Sometimes when script is started and I click Simba window SMART pops in front. Tis quite annoying

It's a known bug. However, there hasn't been any fix implemented since SMART's inception.

oh thanks, I thought there was maybe a hidden option somewhere

I keep getting the error message when i try to run smart 8:
SRL Compiled in 0 msec
** Smart Cannot Spawn Clients **
Successfully executed.

All extensions are up to date, as is my java and simba versions.
Anyone know any solutions? p.s. already checked forums, there is nothing on this problem with smart 8

When loading smart8 - it pops up for no more than a second and then disappears.

"Could not start up Old School RuneScape or RSReady was not detected!
Successfully executed."

Any ideas? Thanks

On whatever script you're using, look up at the top, and somewhere in that area you will see red text that reads:
{$Define SMART}
Add an 8 to the end of SMART so it looks like this:
{$Define SMART8}

[Error] (5:35): Syntax error at line 4
[Error] (5:35): Assignment expected at line 4
Compiling failed.

is the download link broken..

From: maruxxx1
is the download link broken..

Are you sure? I just clicked on this download link and the plugins started downloading. I suggest trying again.

[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(282:145): Invalid number of parameters at line 281
Compiling failed.
[Error] C:\Simba\Includes\SRL\SRL\misc\SmartParams.Simba(78:8): Unknown identifier 'RSReady' at line 77
Compiling failed.

wtf should i do :(

would tell you what I did but dont remember anymore lol

Im quite stumped I get [Error] C:\Simba\Includes\SRL/SRL/misc*/SmartParams.Simba(281:149): Invalid number of parameters at line 280
Compiling failed.
After doing every step properly including those from setting up simba in the first place as I could get the 7.2 client to run. Also when I extracted what was in the binary dl? into the simba plugins i got no notification of it replacing the files and they were extracted in there also the old smart client will work but not the new and it definetly says its the 8.0 dl got it from the binaries above can anybody can help?

I'm getting this:
Exception in Script: Unable to find file 'SRL-OSR/SRL.simba' used from 'C:\Users\Qforce\AppData\Local\Temp\ShatterGuilder_v1.1.simba'

help me please

From: Kingtriton
Im quite stumped I get [Error] C:\Simba\Includes\SRL/SRL/misc*/SmartParams.Simba(281:149): Invalid number of parameters at line 280
Compiling failed.
After doing every step properly including those from setting up simba in the first place as I could get the 7.2 client to run. Also when I extracted what was in the binary dl? into the simba plugins i got no notification of it replacing the files and they were extracted in there also the old smart client will work but not the new and it definetly says its the 8.0 dl got it from the binaries above can anybody can help?

I'm pretty sure this is related to using a script that isn't setup for SMART8. You will need to go to the top of that script and change the

{$DEFINE SMART}

to

{$DEFINE SMART8}

From: Life Stinks
I'm getting this:
Exception in Script: Unable to find file 'SRL-OSR/SRL.simba' used from 'C:\Users\Qforce\AppData\Local\Temp\ShatterGuilder_v1.1.simba'

help me please

This isn't even a little bit related to Smart8. It means you never setup for 07 botting. A quick search (google or forums) should have fixed it for you http://villavu.com/forum/showthread.php?t=99577

C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(281:149): Invalid number of parameters at line 280
Compiling failed.

any ideas guys? i did every step in the vid but i cant seem to load samrt v8.0? has it something to do with my java?

From: Kosogevaar
C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(281:149): Invalid number of parameters at line 280
Compiling failed.

any ideas guys? i did every step in the vid but i cant seem to load samrt v8.0? has it something to do with my java?

Remove the -1 From the Smart Parameters around line 294

Should look like this:

{$IFDEF SMART8}
  Result := SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '');
  {$ELSE}
  Result := SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '');
  {$ENDIF}

From: Itankbots
Remove the -1 From the Smart Parameters around line 294

Should look like this:

{$IFDEF SMART8}
  Result := SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '');
  {$ELSE}
  Result := SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '');
  {$ENDIF}

thanks for replying, i did this but then this came up: [Error] C:\Simba\Includes\SRL\SRL\misc\SmartParams.Simba(78:8): Unknown identifier 'RSReady' at line 77
Compiling failed.

From: Kosogevaar
thanks for replying, i did this but then this came up: [Error] C:\Simba\Includes\SRL\SRL\misc\SmartParams.Simba(78:8): Unknown identifier 'RSReady' at line 77
Compiling failed.

Hmm…I can't remember what causes that…Im tired Lol.

Um, what script you trying to run?

no script at all, in a video of how to install smart v8.0 you can check if it works you had the copy this:

program new;
{$DEFINE SMART8}
{$i srl/srl.simba}

begin
ClearDebug();
SRL_SixHourFix:=True;
SMART_FIXSPEED := TRUE;
SetupSRL();
end.

Idunno then, thats odd. Im tired and can't really think of what is causing that, I know its a fairly common problem but i don't remember what causes it :s

Im sure someone else will know if you ask around.

For me the client pops up for 2 seconds, and then just disappears. Any suggestions?

From: Hans Moleman
For me the client pops up for 2 seconds, and then just disappears. Any suggestions?

Update to the latest java, restart Simba, come back if the problem proceeds

From: Officer Barbrady
Update to the latest java, restart Simba, come back if the problem proceeds

I forgot to mention that I'm on a Mac(If that affects it), sorry lol. I did what you asked and it still closes.(EDIT: it does not close, it just disappears) I set up everything fine on Mac using the mac tut. It opens the client on Smart v7.2.

program new;
{$DEFINE SMART8}
{$i srl/srl.simba}

begin
ClearDebug();
SRL_SIXHOURFIX := TRUE;
SMART_FIXSPEED := TRUE;
SetupSRL();
end.
*When using the code above to to test if SMART v8 works,the client does open but it does not close, it just disappears. I've noticed the stop button option is still visible when it disappears.

I get this message, at 292 I have tried manually compiling. I do not know how to do that..I am looking. I am trying to get this to run, it has been a disaster. I was able to change 294 line, and the other lines. It comes up with 77 line error. I am trying desperately to get this done. I have a very good script idea, I am trying to start working on it. Alas, if I cannot do this I will not beable to get the include correct.

From: DrMopar
I get this message, at 292 I have tried manually compiling. I do not know how to do that..I am looking. I am trying to get this to run, it has been a disaster. I was able to change 294 line, and the other lines. It comes up with 77 line error. I am trying desperately to get this done. I have a very good script idea, I am trying to start working on it. Alas, if I cannot do this I will not beable to get the include correct.

You can all try what I mentioned here: http://villavu.com/forum/showthread.php?t=95653

Not sure what is causing this.

Getting a popup window called SmartParams. Here is the error:
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(282:145): Invalid number of parameters at line 281
Compiling failed.

Wat do? :c

From: Old school u
Not sure what is causing this.

Getting a popup window called SmartParams. Here is the error:
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(282:145): Invalid number of parameters at line 281
Compiling failed.

Wat do? :c

Make sure where SMART is defined at the top of the script it says SMART8.

Honestly sounds horrible, but I fixed it by completely uninstalling everything. Then reinstalling..Sounds awful, but one thing I noticed I did during YoHoJo's guide on youtube was that I kept simba open while adding the files to the correct folders. When you does this it comes up as an error, I must have just hit okay in a rush. I feel sooo stupid! Starting my first script this weekend!

Thanks dude!

Hey BenLand100, thank you for your post. your video helped out a lot about SMART8.

I am getting this error "[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(281:149): Invalid number of parameters at line 280
Compiling failed."

i'm using the code featured in the video.
"program new;
{$DEFINE SMART8}
{$i srl/srl.simba}

begin
ClearDebug();
SRL_SIXHOURFIX := TRUE;
SMART_FIXSPEED := TRUE;
SetupSRL();
end."

Are you absolutely sure you are using 8.0 and not 7.2 or 8.1? That line has no errors.. Perhaps update your include?
You can try replacing the corresponding line in your SmartParams.simba:

Result := SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 553, 's', '', '', -1);

im getting Unknown identifier 'Smart_World'

[Error] C:\Simba\Scripts\begin.simba(8:18): Assignment expected at line 7
Compiling failed.

any help? lol

Where do you place the SMART V8 files?

is this tutorial irrelevant now? i just downloaded simba and ran the test script and its smart v8.3

[Error] C:\Simba\Includes\SRL-OSR\SRL\misc\SmartParams.Simba(76:20): Unknown identifier 'SmartGetAvailablePID' at line 76
Compiling failed.

what to do with this?

how do i install it?