SRL Archive - General News

Hello everyone.

I've released Simba 991 which is basically Simba 0.99 with *SetClientArea functions.

I have also merged Brandon's changes for SRL, I've updated the plugins and I have updated the extensions.

Lots of updates, make sure you're fully up to date before trying a script!

The way you should update:

• Update Simba to 991
• Enable extensions.sex; update extensions.
• Restart Simba.
• Update SRL, MSI, SPS, Plugins.

~Wizzup

E: I think some credit is due, by the way.
Brandon: You did an amazing job. You're a testing machine. ;) And you've written a lot of code too. You're awesome, thanks for all your work.
Coh3n & Silent & Ninja: Testing and realising this all.

E2: Let's hope this works, by the way. I didn't test the latest SRL; but I assume it worked because others were positive about the merge.

E3: List of issues that need to be addressed:

• Colour picker coordinates cannot be pasted into the script right away.(They need the same offset as the client) We need to make it simple to pick colours for a specific area.

Woot! Way to go!

Woot!
I can script again. :)

Great, thanks everyone that helped :)

yay! great job all who worked on it! thanks

Nice work guys :thumbsup:
I will check it out now :)

Thanks SRL community! :>

Also, .991 is master/695b2236a59b848eb17c33646ef76c14face257b/ no?

Also updated SPS now. Make sure you update SPS as well.

From: Le Jingle
Thanks SRL community! :>

Also, .991 is master/695b2236a59b848eb17c33646ef76c14face257b/ no?

No, Simba 99x is now simba-prev. Master is now Simba 1000 (but needs some fixes).
This is the one in the autoupdater: http://nala.villavu.com/downloads/simba-prev/a9c68dcf15dde9c75531ddeaa5c98ac342442b45/

Does that mean hard co-ordinates are all pushed down 50 pixels? If so, I gotta repair all my scripts I made in the downtime, :/

From: Footy
Does that mean hard co-ordinates are all pushed down 50 pixels? If so, I gotta repair all my scripts I made in the downtime, :/

Yes. That is currently the case. Eventually we could consider adding a mechanism to disable this completely, but that would require extensive SRL changes. You could set and reset the area in your script manually, but it's probably better to update.

updated everything and i get this issue:

program new;
{$DEFINE SMART}
{$I SRL/SRL.simba}

var
  x,y:integer;
begin
  setupsrl;
  if(findcolortolerance(x,y,2830906, 123, 319, 124, 320, 3))then
  begin
    writeln('yay');
  end else
    writeln('dangit');
end.   

[B]Picked colour: 2830906 at (123, 319)[/B]
Compiled successfully in 609 ms.
SRL Compiled in 0 msec
Paired with SMART[6004]
[B]dangit[/B]
Successfully executed.

none of my scripts run findColorTolerance() correctly now

From: x[Warrior]x3500
updated everything and i get this issue:

program new;
{$DEFINE SMART}
{$I SRL/SRL.simba}

var
  x,y:integer;
begin
  setupsrl;
  if(findcolortolerance(x,y,2830906, 123, 319, 124, 320, 3))then
  begin
    writeln('yay');
  end else
    writeln('dangit');
end.   

[B]Picked colour: 2830906 at (123, 319)[/B]
Compiled successfully in 609 ms.
SRL Compiled in 0 msec
Paired with SMART[6004]
[B]dangit[/B]
Successfully executed.

none of my scripts run findColorTolerance() correctly now

Co-ordinates are begining below the nav bar now, Im not sure if the color picker will give you the correct co-ordinate.

If you picked those coordinates manually, you need to offset them for the bar.

From: Footy
Co-ordinates are begining below the nav bar now, Im not sure if the color picker will give you the correct co-ordinate.

if the coordinates are beginning below the nav bar now, it will make it a pain for developers… much more irritating to write a script that works with and without smart. and it will be more difficult to remember "oh i used the official rs client while i was creating this part of the script, so i need to take off 50 from my y coords. and i used the Smart client while doing this part of the script, so these shoudl be the correct coords?". makes no sense to begin coord 0,0 below the nav bar.

edit: guess wizzup confirmed it. still dont understand why this would be put in, but w/e. imo, this is more of a pain.

From: Wizzup?
Also updated SPS now. Make sure you update SPS as well.

I was going to ask why that hadn't been changed yet :p I had to do it my self again.
I clicked update tho and got the pushed version, nice one.

I'm not sure if I'm setting things up right lol but I keep getting

SRL Compiled in 15 msec
** Fatal Error: Pairing Clients; Terminating Script **
Successfully executed.

No smart loads and I see you put ALL the plugin's in the updater lol :D so it can't be what happened to me before.

One more question, the offset is exactly Y = 50 and X = 0, correct?

From: x[Warrior]x3500
if the coordinates are beginning below the nav bar now, it will make it a pain for developers… much more irritating to write a script that works with and without smart. and it will be more difficult to remember "oh i used the official rs client while i was creating this part of the script, so i need to take off 50 from my y coords. and i used the Smart client while doing this part of the script, so these shoudl be the correct coords?". makes no sense to begin coord 0,0 below the nav bar.

SMART and the official client doesn't matter. Yes, it is a pain temporarily. But we cannot fix everything at once. The main goal is working scripts,srl,simba. Next goal is cleaning up.

@Footy. I think it's 50 if you're logged in, yes.

From: Wizzup?
SMART and the official client doesn't matter. Yes, it is a pain temporarily. But we cannot fix everything at once. The main goal is working scripts,srl,simba. Next goal is cleaning up.

ok, i think i understand now. i was looking over ggzz's code before this official release came out and i found that he added variables to most, if not all, of the functions (of the files i just happened to be looking through). these variables obviously were the +50 of the nav bar. when u said temporary fix, i got confused, because if these variables were kept, i dont see why a temp fix would be necessary; so i looked through the official srl, and didnt find the same variables. so since these variables were not updated for the official srl yet, the temp fix is needed.


makes sense now :) . good work!

Awesome work everyone! Y'all did great! :)

I got this error when trying to run a script:

"[Error] C:\Simba\Includes\srl/srl/misc/smart.simba(53:19): Invalid number of parameters at line 52
Compiling failed."

I have updated all of the extensions and I have imported the plugins.zip folder.

Matt

[Error] C:\Simba\Includes\srl/srl/misc/Smart.simba(53:19): Invalid number of parameters at line 52
Compiling failed.

stop using this line:

{$I srl/srl/misc/smart.simba }   

replace it with

{$Define Smart}   

okay why doesnt it work yet?

From: print123
okay why doesnt it work yet?

it does work, i have been botting since minutes after this was released. if you have an issue, its best not to be vague. no one can help u if you just say, "why it no work". :/

Most scripts will require fixes, I know all of mine are down at the moment.

SRL Compiled in 16 msec
** Fatal Error: Pairing Clients; Terminating Script **


Also using java 6 etc…. any ideas?

From: Footy
Most scripts will require fixes, I know all of mine are down at the moment.

scripts that worked BEFORE the nav bar update will still work. this is because they decided to start 0,0 right below the nav bar (essentially making it so the nav bar update never occured). but all those that were updated to support the nav bar willl be broken.

SRL Compiled in 16 msec
** Fatal Error: Pairing Clients; Terminating Script **

this might help:
http://villavu.com/forum/showpost.php?p=1074867&postcount=121

From: Ollybest
SRL Compiled in 16 msec
** Fatal Error: Pairing Clients; Terminating Script **

Hmm…. :/

Just press play again. Not sure if Simba comes with this commit: https://github.com/BenLand100/SMART/commit/735b052362c20f38f8c25118f7b0f44f9a26bd18

It should though. I only need to press play once or twice. Usually the first time I press it, if I get that problem, it works the second time around. This is because smart needed a couple seconds to pair. After that, it works every time. But again this depends on if Simba ships with the smart that has that commit.


For scripts, the only thing you would really need to change are the defines and include/setup stuff.
And no the fix didn't have to add 50 to every single function because ImageSetClient and MouseSetClient does that for you for every finder function automatically.

so finally we don't need the 50 pixel changes? I mean on old scripts

Windows XP doesn't log in (primary botting PC). SMART will come up and my current little script I made for login doesnt correctly work either. Windows 7 seemed to be working fine (my laptop)

From: blinkblink
so finally we don't need the 50 pixel changes? I mean on old scripts

hopefully we will eventually need to change it to +50pxls, but as srl stands now, no. once srl gets fully updated with the correct coords, i hope wizzup gets rid of the offset 0,0.

From: Brandon
Just press play again. Not sure if Simba comes with this commit: https://github.com/BenLand100/SMART/commit/735b052362c20f38f8c25118f7b0f44f9a26bd18

It should though. I only need to press play once or twice. Usually the first time I press it, if I get that problem, it works the second time around. This is because smart needed a couple seconds to pair. After that, it works every time. But again this depends on if Simba ships with the smart that has that commit.


For scripts, the only thing you would really need to change are the defines and include/setup stuff.
And no the fix didn't have to add 50 to every single function because ImageSetClient and MouseSetClient does that for you for every finder function automatically.

Hmm, Still doesnt work restarted, pressed play like 50 times still nothing, once this did pop up and make me laugh though
Although any more ideas? :/

From: blinkblink
so finally we don't need the 50 pixel changes? I mean on old scripts

You shouldn't have to. Though you should note that everything the colour picker prints in the debug box has to have a Y-offset of 50.

@That virus report did you get that from Benland's github? If so it's a false positive.

From: x[Warrior]x3500
stop using this line:

{$I srl/srl/misc/smart.simba }   

replace it with

{$Define Smart}   

I have ran into other issues after changing that. Would scripts made to run on 0.98 still work on 0.991? Or would I have to modify them?

From: Brandon
You shouldn't have to. Though you should note that everything the colour picker prints in the debug box has to have a Y-offset of 50.

@That virus report did you get that from Benland's github? If so it's a false positive.

I guess I got the smart from the srl update?

From: x[Warrior]x3500
this might help:
http://villavu.com/forum/showpost.php?p=1074867&postcount=121

I asked Ben if I needed to distribute a new smart and he said no… I can upload a newer version tomorrow.

If I want my scripts to run from 0, 0 instead of change all my co-ords, is there a way to manually set that?

From: Brandon
You shouldn't have to. Though you should note that everything the colour picker prints in the debug box has to have a Y-offset of 50.

@That virus report did you get that from Benland's github? If so it's a false positive.

Alright cool :)
I had fixed several scripts I had on my own for the 50+ pixels thing.. lol now I am changing them back to original coordinates

Minor question do we still need to add the beginning and the ending code changes to the old scripts.. for example:

{$DEFINE SMART}
{$i srl/srl.simba}
{$IFDEF SIMBAMAJOR980}
 {$I SRL/SRL/MISC/PAINTSMART.SIMBA}
{$ELSE}
 {$I SRL/SRL/MISC/SMARTGRAPHICS.SIMBA}
{$ENDIF}  



 {$IFDEF SIMBAMAJOR980}
  Smart_Server := 0;
  Smart_Members := False;
  Smart_Signed := True;
  Smart_SuperDetail := False;
    {$ELSE}
  SRL_SIXHOURFIX := TRUE;
  SMART_FIXSPEED := TRUE;
  {$ENDIF}
  setupSRL(); 

From: Wizzup?
I asked Ben if I needed to distribute a new smart and he said no… I can upload a newer version tomorrow.

Hmm is he sure about that? That flag was only changed 9 days ago so any plugins that were compiled before that well..

From: Wizzup?
I asked Ben if I needed to distribute a new smart and he said no… I can upload a newer version tomorrow.

Guess il wait for that and see if it fixes my error.

From: blinkblink
Alright cool :)
I had fixed several scripts I had on my own for the 50+ pixels thing.. lol now I am changing them back to original coordinates

Minor question do we still need to add the beginning and the ending code changes to the old scripts.. for example:

{$DEFINE SMART}
{$I SRL/SRL.Simba}
{$I SRL/SRL/Misc/SmartGraphics.Simba}

begin
  {$IFDEF SMART}
  SRL_SixHourFix := True;
  Smart_FixSpeed := True;
  {$ENDIF}

  SetupSRL;
end.

The Ifdefs were there for backwards compatibility but since we all know that the bar affects it so bad, no point unless ur using simba for a private server. And yes as always you need begin's and end's for every function and the mainloop.

From: Footy
If I want my scripts to run from 0, 0 instead of change all my co-ords, is there a way to manually set that?

the 0,0 offset is apart of simba afaik. so to get around this you have 2 options:
1. go into simba and get rid of the offset, then recompile it. only works for u. i am incorrect on this one. look below.
2. just subract 50 from all your static Y coords

From: x[Warrior]x3500
the 0,0 offset is apart of simba afaik. so to get around this you have 2 options:
1. go into simba and get rid of the offset, then recompile it. only works for u.
2. just subract 50 from all your static Y coords

Open Globals.Simba and change SRL_NAVBAR_INGAME_Y to 0 and SRL_NAVBAR__Login_Y to 0 if you don't want the offset.

From: Brandon

{$DEFINE SMART}
{$I SRL/SRL.Simba}
{$I SRL/SRL/Misc/SmartGraphics.Simba}

begin
  {$IFDEF SMART}
  SRL_SixHourFix := True;
  Smart_FixSpeed := True;
  {$ENDIF}

  SetupSRL;
end.

The Ifdefs were there for backwards compatibility but since we all know that the bar affects it so bad, no point unless ur using simba for a private server. And yes as always you need begin's and end's for every function and the mainloop.

well yes that is what I was asking backwards compatibility.. I stated Old Scripts

But since I said using Old script.. do we still need it for those, as in if they weren't updated after the nav bar changes

From: blinkblink
well yes that is what I was asking backwards compatibility.. I stated Old Scripts

But since I said using Old script.. do we still need it for those, as in if they weren't updated after the nav bar changes

k lets clear it up.
If that script is a runescape script and not a private server script, just do what I posted above. If it is a script that is for private servers then what you have is fine.

Either way you still need a begin and end for every function. OLD scripts must be updated if you're using it for RS and using Simba 0.99.

From: Brandon
Open Globals.Simba and change SRL_NAVBAR_INGAME_Y to 0 and SRL_NAVBAR__Login_Y to 0 if you don't want the offset.

And Im botting again! Thanks! too lazy to fix all the scripts I made, Ill use this for now.

I haven't found a single script that works -.-, it either arbitrarily says there's no identifier on a variable or says "** Fatal Error: Pairing Clients; Terminating Script **" or that it cannot spawn a client, etc etc.

[Error] C:\Simba\Includes\srl/srl/misc/paintsmart.simba(39:3): Unknown identifier 'SmartSetDebug' at line 38
Compiling failed.

From: Brandon
k lets clear it up.
If that script is a runescape script and not a private server script, just do what I posted above. If it is a script that is for private servers then what you have is fine.

Either way you still need a begin and end for every function. OLD scripts must be updated if you're using it for RS and using Simba 0.99.

I posted Examples part of the code, I obviously know it uses begins & ends…
My question… so no need for backward compatibility anymore? For the old scripts.. as in I am asking if its not needing anymore to add:

{$IFDEF SIMBAMAJOR980}   //<--- THIS
 {$I SRL/SRL/MISC/PAINTSMART.SIMBA}
{$ELSE}//<--- THIS
 {$I SRL/SRL/MISC/SMARTGRAPHICS.SIMBA}
{$ENDIF} //<--- THIS 

 {$IFDEF SIMBAMAJOR980}//<--- THIS
  Smart_Server := 0;
  Smart_Members := False;
  Smart_Signed := True;
  Smart_SuperDetail := False;
    {$ELSE}//<--- THIS
  SRL_SIXHOURFIX := TRUE;
  SMART_FIXSPEED := TRUE;
  {$ENDIF}

Don't get confused of making new scripts.. I am talking about old scripts which on your Gheto Fix guide you mentioned what we needed to add for backward compatibility - http://villavu.com/forum/showthread.php?t=84334

Ahh kk I'll host a teamviewer session.

698 811 201
7462

You can all connect and just follow along.. Don't mess with my mouse or comp. I'll turn it off if I see any fishy stuff and you'll ruin it for yourselves.

I won't be on for long so hurry up. Someone with a bit of knowledge to help other connect too.

Also someone give me an outdated script so I can update it on the spot.

EDIT: No one seems to want to connect :S I'll leave my teamviewer open for the next hour. Feel free to connect and watch me install simba and smart from scratch and update a script. You'll get the chance to grab the script if you want as well.

FIXES FOR SMARTDEBUGTHINGY AND CANT SPAWN CLIENTS

First of all, download smart 7.2 which you can find in the smart section of the forums. Put all the files in the Simba/Plugins folder. Replace neccesary stuff. If the script contains

{$i SRL/SRL/misc/paintsmart.simba} 

Replace it with

{$I SRL/SRL/Misc/SmartGraphics.Simba} 

Your script now should compile. Have fun

Finally released, awesome work Wizzup, Brandon, Coh3n, and Ninja (Kyle Undefined?)

Thank you, lets see if this works. Haven't been able to get Simba running for a while now even with all the fixes.

This works amazingly. Thank you development team for all your hard work!

Teamviewer session closed.. Updated 3 scripts. Armoured Zombies Killer, Waterfiends Killer and someone requested Narcle's AK Smelter.

All work. Only things changed were the headers in Narcle's smelter aka:

{$Define Smart} and SmartGraphics. That's it. Oh and for my own scripts I had to remove SmartGetDebugDC and use Smart_DrawBitmap instead of a TCanvas. 3 people can vouch since only 3 of you took the opportunity to connect. The SRLUpdates thread in the news section demonstrates everything needed to update a script. I've used it infront of their eyes.

Installed Simba from scratch along with a TON of demonstrations! Btw to anyone using Simba atm, you must compile Smart until wizzup does. I demonstrated that the smart that comes with simba does NOT load (constantly fails to pair).
After showing the guys how to compile smart, it works for all of them and they got the scripts I updated.

Goodnight.

From: Brandon
Teamviewer session closed.. Updated 3 scripts. Armoured Zombies Killer, Waterfiends Killer and someone requested Narcle's AK Smelter.

All work. Only things changed were the headers aka:

{$Define Smart} and SmartGraphics. That's it. 3 people can vouch since only 3 of you took the opportunity to connect.

Installed Simba from scratch along with a TON of demonstrations! Btw to anyone using Simba atm, you must compile Smart until wizzup does. I demonstrated that the smart that comes with simba does NOT load (constantly fails to pair).
After showing the guys how to compile smart, it works for all of them and they got the scripts I updated.

Goodnight.

Ily2 <3

Great to see simba back, now I can being practising my scripting skills again.

Thanks to everyone who made it possible.

Can I hit update on my Simba for the update or do I need to Redownload everything?

Boo I missed the tv session cuz I was working. I figured out most of it on my own. Only problem is that now I get the old pairing client fatal error. What needs to be done to fix this? Can someone explain it step by step please?

Thanks for narcle brandon, great support and free tv sessions ftw : )

From: po2n star
Can I hit update on my Simba for the update or do I need to Redownload everything?

Nope, updating Simba, and then your SRL, SPS, and MSI from the tool bars should do it.

Do I have to re download Simba even tho I have the temp fix on my Simba or it doesn't matter. I want to make sure I do everything correctly

anyone got a clue how to make smart stop hijacking my other client window, when i try to run multiple instances of smart they pair to each other resulting in one sessionCompiled successfully in 749 ms.
SRL Compiled in 0 msec
Paired with SMART[5716]

im getting all kinds of errors first i got simba going on msi but fails to walk anywere, cant seem to get any of my other scripts to even load smart, im not very good at all this any help would be much app

From: Brandon
Teamviewer session closed.. Updated 3 scripts. Armoured Zombies Killer, Waterfiends Killer and someone requested Narcle's AK Smelter.

All work. Only things changed were the headers in Narcle's smelter aka:

{$Define Smart} and SmartGraphics. That's it. Oh and for my own scripts I had to remove SmartGetDebugDC and use Smart_DrawBitmap instead of a TCanvas. 3 people can vouch since only 3 of you took the opportunity to connect. The SRLUpdates thread in the news section demonstrates everything needed to update a script. I've used it infront of their eyes.

Installed Simba from scratch along with a TON of demonstrations! Btw to anyone using Simba atm, you must compile Smart until wizzup does. I demonstrated that the smart that comes with simba does NOT load (constantly fails to pair).
After showing the guys how to compile smart, it works for all of them and they got the scripts I updated.

Goodnight.

You released your WFK again to the public :o ?

Awesome. Will start testing :)

From: nokiaacer
anyone got a clue how to make smart stop hijacking my other client window, when i try to run multiple instances of smart they pair to each other resulting in one sessionCompiled successfully in 749 ms.
SRL Compiled in 0 msec
Paired with SMART[5716]

SetupSmart(False); // change this line to True. (line 186 in srl.simba)

From: x[Warrior]x3500
SetupSmart(False); // change this line to True. (line 186 in srl.simba)

I thought you could use that inside the script… not hardcode change srl.simba

*edit*
I am so confused reading: http://villavu.com/forum/showthread.php?t=84334

SetupSmart: Allows a user to setup a new remote client. This has one parameter which allows you to forcefully start a new client if true. If false, it will use a client that is already loaded. After calling this method, the controller and the client are automatically paired. This will allow you to have multiple smarts per simba process as smart now has it's own process: "SmartRemote.exe". Each Client Spawned has it's own Identifier.

Usage:

SetupSmart(ForceNewClient: Boolean);

blah me lost

From: blinkblink
I thought you could use that inside the script… not hardcode change srl.simba

well, in setupsrl; they declare setupsmart(); so this is where smart is started. i guess u can leave it be, and then do ANOTHER setupsmart(); afterward. (it will first load the previous smart, then it will reload setupsmart with a new smart client). but i dont know how well it will work. havnt really tested

From: blinkblink
I thought you could use that inside the script… not hardcode change srl.simba

Yeah could make it a variable. Good idea. At the time when I was writing that, it didn't cross my mind. The goal was to get it to work flawlessly. It really wouldn't be hard to add a variable to the include.

@Illuminatiswag no I didn't re-release it. The guys who viewed my screen during the teamviewer session got all the example scripts I modified. Three of them to be exact. And 3 people viewed the screen (one being Shay/Sin).

Edit: Added.. I'll send as a pull request. It's a simple 1 liner.

In Globals.Simba: Smart_ForceNew: Boolean;

In SRL.Simba SetupSmart(Smart_ForceNew);

That's it.

Guess I missed some excitement, but looks like the good old trusty team has our back as usual. Thank you for all your hard work.

From: mrwicked911
I haven't found a single script that works -.-, it either arbitrarily says there's no identifier on a variable or says "** Fatal Error: Pairing Clients; Terminating Script **" or that it cannot spawn a client, etc etc.

That's a SMART error. Download the latest SMART and drop it into your plugins folder.

Woot, I can test my newbie scripts now. :)
Thanks a bunch.

From: blinkblink
I thought you could use that inside the script… not hardcode change srl.simba

*edit*
I am so confused reading: http://villavu.com/forum/showthread.php?t=84334

blah me lost

I've sent a pull on that.. It should be fixed when a dev sees it. https://github.com/SRL/SRL-5/pull/57/files
Already tested and it works. Had it in the very first commit but Iunno why I removed it. I think I removed it when testing the paired clients stuff.

Other than that everything else working fine?

Also to clarify that documentation you quoted, True will open a new smart and simba will have control of that smart. False will use the smart that is already open so no new clients will popup. The identifier is Smart's processID. If you look in the title bar of smart you'll notice something like Benland100 [Some random numbers here].

Those numbers are the Identifier aka process ID from task manager. Also when you compile a script, it will say Client Paired with [Some random numbers here]. It's telling you which client that simba tab has control over.

That is the only thing users need to know about it. All the other mumbo jumbo stuff you need not worry about. I'll update that thread to reflect what I said here.

From: ethenhenderson
im getting all kinds of errors first i got simba going on msi but fails to walk anywere, cant seem to get any of my other scripts to even load smart, im not very good at all this any help would be much app

So to get latest everything and get stuff working do this:

1. Open Simba go to tools, hit update, follow instructions
2. restart simba
3. Go to SRL -> Check for update
4. Go to SPS -> Check for update
5. Go to MSI -> Check for update

etc.

Not sure if MSI has had its SMART implementations updated or not, which could be causing you some problems. Hope this helps :)

Does this mean we don't need the ghetto fix anymore and there's a newer version that will leave simba working it was before the slayer update?

From: Brandon
I've sent a pull on that.. It should be fixed when a dev sees it. https://github.com/SRL/SRL-5/pull/57/files
Already tested and it works. Had it in the very first commit but Iunno why I removed it. I think I removed it when testing the paired clients stuff.

Other than that everything else working fine?

Also to clarify that documentation you quoted, True will open a new smart and simba will have control of that smart. False will use the smart that is already open so no new clients will popup. The identifier is Smart's processID. If you look in the title bar of smart you'll notice something like Benland100 [Some random numbers here].

Those numbers are the Identifier aka process ID from task manager. Also when you compile a script, it will say Client Paired with [Some random numbers here]. It's telling you which client that simba tab has control over.

That is the only thing users need to know about it. All the other mumbo jumbo stuff you need not worry about. I'll update that thread to reflect what I said here.

;) Alright good, I will play more with some scripts in a bit.. waiting to see if AGS script having the " SRL_SIXHOURFIX := TRUE;" to see if it bypasses the 6hrs - currently at the 4h 30min mark.

I know earlier today I tried using SPS with a custom map and I was getting a weird error on compiling inside sps, but that was before I noticed the current updates(was using the ghetto fix, had not ran any updates since using it) - will try it again in a bit after my test.

From: Ucantseemebot
Does this mean we don't need the ghetto fix anymore and there's a newer version that will leave simba working it was before the slayer update?

I am not using the ghetto fix. This will return everything to as it was before the update. MSI may still be broken for a short while, but srl is working as it should.

Is ODTM working with this latest update?

Thanks for all the work that the dev team have put into this update. I will be donating $50 to Villavu for all the effort that has been done :)

Justin.

whenever i hit MSI < Run there is an error that appears and it says

Running MSI…
[Error] C:\Simba\Includes\sps/sps.simba(306:51): Invalid number of parameters at line 305
Compiling failed.

From: bulldog343
whenever i hit MSI < Run there is an error that appears and it says

Running MSI…
[Error] C:\Simba\Includes\sps/sps.simba(306:51): Invalid number of parameters at line 305
Compiling failed.

You will need to wait for a MSI update.

What is actually needed so that "SRL_SIXHOURFIX := TRUE;" actually gets to work?

I was using it on the AGS(AlternativeGateStoner) script, and instantly after the 6hrs(upon being logged out) it just ended

Successfully executed.
The following DTMs were not freed: [3]

SmartGraphics.simba fails on me.
Unknown identifier 'SmartSetDebug' at line 21
Edit: Same with Reports.simba, something about SRL_Warn not existing anymore.
edit2: Did a fresh Simba install, seems to be fine now other than the pairing error everyone gets.

[Error] C:\Simba\Includes\SRL/srl/misc/paintsmart.simba(41:33): Unknown identifier 'SmartGetDebugDC' at line 40

only error im getting when running any script…ive replaced all plugins and updated srl

From: raees
[Error] C:\Simba\Includes\SRL/srl/misc/paintsmart.simba(41:33): Unknown identifier 'SmartGetDebugDC' at line 40

only error im getting when running any script…ive replaced all plugins and updated srl

I could be wrong because I haven't looked at anything as far as the new Simba yet…but with a fix I was using directly from Brandon, you need to change your paintsmart.simba. Just find it and change it to "smartgraphics.simba" instead.

thanks alot :D but one question , can i use old scripts now ? with this fix ? like ghouling ghouler 7.5 and barb fly fisher etc?
EDIT; baahh well i updated to , and trying to run ghouling ghouler and gets this ;
[Error] C:\Simba\Includes\SRL/SRL/misc/paintsmart.simba(41:33): Unknown identifier 'SmartGetDebugDC' at line 40
Compiling failed.

From: shstiger2009
I could be wrong because I haven't looked at anything as far as the new Simba yet…but with a fix I was using directly from Brandon, you need to change your paintsmart.simba. Just find it and change it to "smartgraphics.simba" instead.

there is already a file named "smartgraphics.simba" in the same location…so i wouldnt see the point in renaming the paintsmart.simba?

There's a problem with *setclientarea's. Image seems to be off, even though I checked globals.simba to make sure it said 50 pixels.
Image:
You can see here that the mouse is acting correctly, but the box is drawn 50 pixels above it.

I seem to be getting a Pairing Clients error. Everything is updated. Will try and find out what's going on

From: [J]ustin
I seem to be getting a Pairing Clients error. Everything is updated. Will try and find out what's going on

You need to download SMART from BenLand's github and extract to the plugins folder. I had the same problem, this fixed it.

From: litoris
You need to download SMART from BenLand's github and extract to the plugins folder. I had the same problem, this fixed it.

Thanks for the suggestion, it failed for me.

From: [J]ustin
Thanks for the suggestion, it failed for me.

Try a fresh install?

From: litoris
Try a fresh install?

Yes I have.

I keep getting the Error even after the updated simba and srl ect..

[Error] C:\Simba\Includes\SRL/SRL/Misc/SMART.simba(53:19):
 Invalid number of parameters at line 52
Compiling failed.

Good Job people!

Go SRL!

~Home

From: po2n star
Do I have to re download Simba even tho I have the temp fix on my Simba or it doesn't matter. I want to make sure I do everything correctly

I made a list in the first post. Apply each entry chronologically and you'll be fine.

From: litoris
There's a problem with *setclientarea's. Image seems to be off, even though I checked globals.simba to make sure it said 50 pixels.
Image:
You can see here that the mouse is acting correctly, but the box is drawn 50 pixels above it.

I don't understand what you're saying. What is wrong?
E: Ah. Your drawing is above that. Well, you will need to offset your own drawing.

Can anybody help me with this:
This is the scripts link: http://villavu.com/forum/showthread.php?t=74508&page=12
*note* the last post is the way I am using the script(don't run it like that since you need to revert back all the *y* coordinates) - I just want to know what needs to be added or changed so that the bypassing 6hr thing works with that script

From: blinkblink
What is actually needed so that "SRL_SIXHOURFIX := TRUE;" actually gets to work?

I was using it on the AGS(AlternativeGateStoner) script, and instantly after the 6hrs(upon being logged out) it just ended

Successfully executed.
The following DTMs were not freed: [3]

Can someone hit me up with a link to Newest SMART =)

~Home

Hi Wizzup.

I have tried to update my SRL\Simba ect but I am still getting this error.

H:\Simba>Simba.exe
Can not load SQLite client library "sqlite3.dll". Check your installation.
You can find the library at "http://www.sqlite.org/".
Setting LastConfig/MainForm/RecentFiles/File1 to
You cannot hide the window, since its not created by Simba
Setting Extensions/ExtensionCount to 10
Adding Plugin Path: H:\Simba\Plugins\
Adding Plugin Path: H:\Simba\Plugins\
Script name will be: Fisher
Loading plugin libsmartremote32 at H:\Simba\Plugins\
Polling for SMARTs
Plugin Version:2
function SmartClientID(idx: integer): integer;
Loading: function SmartClientID(idx: integer): integer;
function SmartGetClients(only_unpaired: boolean): integer;
Loading: function SmartGetClients(only_unpaired: boolean): integer;
function SmartSpawnClient(remote_path, root, params: string; width, height: inte
ger; initseq, useragent, jvmpath: string; maxmem: integer): integer;
Loading: function SmartSpawnClient(remote_path, root, params: string; width, hei
ght: integer; initseq, useragent, jvmpath: string; maxmem: integer): integer;
function SmartPairClient(pid: integer): boolean;
Loading: function SmartPairClient(pid: integer): boolean;
function SmartKillClient(pid: integer): boolean;
Loading: function SmartKillClient(pid: integer): boolean;
function SmartCurrentClient(): integer;
Loading: function SmartCurrentClient(): integer;
function SmartImageArray(): integer;
Loading: function SmartImageArray(): integer;
function SmartDebugArray(): integer;
Loading: function SmartDebugArray(): integer;
function SmartGetRefresh: integer;
Loading: function SmartGetRefresh: integer;
procedure SmartSetRefresh(x: integer);
Loading: procedure SmartSetRefresh(x: integer);
procedure SmartSetTransparentColor(color: integer);
Loading: procedure SmartSetTransparentColor(color: integer);
procedure SmartSetDebug(enabled: boolean);
Loading: procedure SmartSetDebug(enabled: boolean);
procedure SmartSetGraphics(enabled: boolean);
Loading: procedure SmartSetGraphics(enabled: boolean);
procedure SmartSetEnabled(enabled: boolean);
Loading: procedure SmartSetEnabled(enabled: boolean);
function SmartActive: boolean;
Loading: function SmartActive: boolean;
function SmartEnabled: boolean;
Loading: function SmartEnabled: boolean;
procedure SmartGetMousePos(var x, y: integer);
Loading: procedure SmartGetMousePos(var x, y: integer);
procedure SmartHoldMouse(x, y: integer; left: boolean);
Loading: procedure SmartHoldMouse(x, y: integer; left: boolean);
procedure SmartReleaseMouse(x, y: integer; left: boolean);
Loading: procedure SmartReleaseMouse(x, y: integer; left: boolean);
procedure SmartHoldMousePlus(x, y, button: integer);
Loading: procedure SmartHoldMousePlus(x, y, button: integer);
procedure SmartReleaseMousePlus(x, y, button: integer);
Loading: procedure SmartReleaseMousePlus(x, y, button: integer);
procedure SmartMoveMouse(x, y: integer);
Loading: procedure SmartMoveMouse(x, y: integer);
procedure SmartWindMouse(x, y: integer);
Loading: procedure SmartWindMouse(x, y: integer);
procedure SmartClickMouse(x, y: integer; left: boolean);
Loading: procedure SmartClickMouse(x, y: integer; left: boolean);
procedure SmartClickMousePlus(x, y, button: integer);
Loading: procedure SmartClickMousePlus(x, y, button: integer);
function SmartIsMouseButtonHeld(button: integer): boolean;
Loading: function SmartIsMouseButtonHeld(button: integer): boolean;
procedure SmartSendKeys(Text: String; keywait, keymodwait: integer);
Loading: procedure SmartSendKeys(Text: String; keywait, keymodwait: integer);
procedure SmartHoldKey(Code: Integer);
Loading: procedure SmartHoldKey(Code: Integer);
procedure SmartReleaseKey(Code: Integer);
Loading: procedure SmartReleaseKey(Code: Integer);
function SmartIsKeyDown(Code: Integer): Boolean;
Loading: function SmartIsKeyDown(Code: Integer): Boolean;
function SmartGetColor(x, y: integer): integer;
Loading: function SmartGetColor(x, y: integer): integer;
function SmartFindColor(var x, y: integer; color, sx, sy, ex, ey: integer): bool
ean;
Loading: function SmartFindColor(var x, y: integer; color, sx, sy, ex, ey: integ
er): boolean;
function SmartFindColorTolerance(var x, y: integer; color, sx, sy, ex, ey, tol:
integer): boolean;
Loading: function SmartFindColorTolerance(var x, y: integer; color, sx, sy, ex,
ey, tol: integer): boolean;
function SmartFindColorSpiral(var x, y: integer; color, sx, sy, ex, ey: integer)
: boolean;
Loading: function SmartFindColorSpiral(var x, y: integer; color, sx, sy, ex, ey:
 integer): boolean;
function SmartFindColorSpiralTolerance(var x, y: integer; color, sx, sy, ex, ey,
 tol: integer): boolean;
Loading: function SmartFindColorSpiralTolerance(var x, y: integer; color, sx, sy
, ex, ey, tol: integer): boolean;
Plugin libsmartremote32 already loaded: 0
The DLL "libsmartremote" doesn't set a memory manager.
formWriteln: [Hint] C:\Users\Justin\Desktop\Fisher.simba(709:5): Variable 'TOLS'
 never used at line 708
formWriteln: Compiled successfully in 343 ms.
formWriteln: SRL Compiled in 0 msec
Polling for SMARTs
H:/Simba/Plugins/smartremote32.exe
Shared Memory mapped to 0x60
Trying port 4200
Remote socket listening
Attempting to connect to localhost:4200
Client socket connected: 136
Running SMART Constructor
SMART Initialized!
Library: 0x6c780000
SmartSetup Entered
Attempting to load default server JVM
Attempting to load default client JVM
Could not locate the Java Virtual Machine library
Call appears to have failed
RLoading plugin libsmartremote32 at H:\Simba\Plugins\
unning SMART Destructor
Plugin libsmartremote32 already loaded: 0
REeleasing SMART library...
IOS Paired
SCMART Finalized!
lient possibly paired to us
Attempting to connect to localhost:4200
Could not connect socket: 10061
Zombie detected (no socket response)
formWriteln: ** Fatal Error: Pairing Clients; Terminating Script **
Current Simba version: 991
Latest Simba Version: 991
formWriteln: Successfully executed.

I have had YoHoJo to have a look but he is also unable to see what is going on.

Any chance you know the fix\problem?

Thanks,

Justin

E: I am running 64bit W7 but it seems to be loading smartremote32?

Home, there are instructions on how to build it in a post by Brandon somewhere. [J]ustin, I don't know about SMART specific issues. Perhaps a newer SMART will help? I can try building one later.

BenLand100 usually builds newer ones and uploads them to his github though. I can see he didn't do that atm. I'll ask him to do that. (My computer with all cross compilers isn't plugged in atm)

Also, run the 32 bit Simba. (I can see you are doing that), it's not weird that it loads 32 bit plugins. It's supposed to.

When we merge lape-srl, you can actually use a 64 bit Simba. But for now, don't.

If it helps at all.
I sent him my EXACT Simba folder (which for me works perfectly), yet for him it did not work and he get's that error, Why could that be?!

From: Wizzup?
Home, there are instructions on how to build it in a post by Brandon somewhere. [J]ustin, I don't know about SMART specific issues. Perhaps a newer SMART will help? I can try building one later.

BenLand100 usually builds newer ones and uploads them to his github though. I can see he didn't do that atm. I'll ask him to do that. (My computer with all cross compilers isn't plugged in atm)

Also, run the 32 bit Simba. (I can see you are doing that), it's not weird that it loads 32 bit plugins. It's supposed to.

When we merge lape-srl, you can actually use a 64 bit Simba. But for now, don't.

Ah okay, thanks for clearing that up for me (was unsure if Smart plugins would be effecting Simba talking to it or something like that). I'll keep an eye on the plugins and see when the update is pushed I will give that a try.

E: Just moved my Simba file over to my VM, (Windows server 2008 R2) and everything loads fine… Something on my local computer must be broken\wrong…

I'm also getting the spawn clients error.

Compiled successfully in 484 ms.
SRL Compiled in 15 msec
** Smart Cannot Spawn Clients **
Successfully executed.

Wizzup, is there an ETA for Lape SRL? I'm looking forward to continue with my edge detection but it will be much faster in Lape so I would rather write it from scratch with Lape.

From: J J
I'm also getting the spawn clients error.

Compiled successfully in 484 ms.
SRL Compiled in 15 msec
** Smart Cannot Spawn Clients **
Successfully executed.

Wizzup, is there an ETA for Lape SRL? I'm looking forward to continue with my edge detection but it will be much faster in Lape so I would rather write it from scratch with Lape.

Try opening simba from the origin. If that doesn't work reinstall simba and update. I updated everything and had the same problem but a reinstall did the trick for me.. good luck

From: J J
Wizzup, is there an ETA for Lape SRL? I'm looking forward to continue with my edge detection but it will be much faster in Lape so I would rather write it from scratch with Lape.

Yeah. Basically we need to bring it the branch up to date with the latest changes and then we can merge it. It should be as simple as that. I can't give an exact ETA, but I'd think within two weeks. Probably sooner.

random question, but does MouseItem still work?

Using this for me its not doing anything

MouseItem(1,1);

*edit*
I'm a moron, was testing without any items lol Fail

Justin, run as Admin. ;)

~Home

From: J J
I'm also getting the spawn clients error.

Compiled successfully in 484 ms.
SRL Compiled in 15 msec
** Smart Cannot Spawn Clients **
Successfully executed.

I had that error, re-downloading the plugins from the Smart 7.2 thread seemed to fix it, though.

Also, no news on ObjDTM working with this update? I can't even seem to enable the extension without Simba crashing..

From: P1ng
I had that error, re-downloading the plugins from the Smart 7.2 thread seemed to fix it, though.

Also, no news on ObjDTM working with this update? I can't even seem to enable the extension without Simba crashing..

ObjDTM is working well for me. The only thing I noticed is that you have to include it after SmartGraphics to prevent this error
[Error] C:\Simba\Includes\SRL/SRL/Misc/SmartGraphics.Simba(12:3): Duplicate identifier 'SMART_Canvas' at line 11

{$DEFINE SMART}
{$I SRL/SRL.Simba}
{$I SRL/SRL/Misc/SmartGraphics.Simba}
{$I ObjectDTM\ObjDTMInclude.simba}  

^this way doesn't give that error and I can run the script with no problems

Working nicely. Thanks to all who worked on this: http://villavu.com/forum/showthread.php?t=87258

i keep getting erros and sps/srl/extension/plugins/msi are "no update available hence they are latest..

SRL Compiled in 0 msec
** Fatal Error: Pairing Clients; Terminating Script **
Successfully executed.


[Error] C:\Simba\Includes\srl/srl/misc/paintsmart.simba(41:33): Unknown identifier 'SmartGetDebugDC' at line 40
Compiling failed.


any advice please? and i tried reinstalling a bunch of times

SMARTv7.2.zip &#8212; All Targets (32bit and 64bit) and Test-Apps

1.2MB · Uploaded a month ago

From Benland's github.. The smart he has up there is older than his latest update so yeah..

and I'll host another teamviewer session in an hr.. I'll edit this post with my ID and pass.

EDIT: Here..
698 811 201
8485

From: Home
Justin, run as Admin. ;)

~Home

Tried it. Failed.

From: Brandon
From Benland's github.. The smart he has up there is older than his latest update so yeah..

and I'll host another teamviewer session in an hr.. I'll edit this post with my ID and pass.

Can't wait! Thanks mate

I keep getting this message:


Sometimes it says 'fire wall' and sometimes 'file wall'. How do I fix this? Thanks. ;)

From: rsca_fun
I keep getting this message:


Sometimes it says 'fire wall' and sometimes 'file wall'. How do I fix this? Thanks. ;)

Disable the Security extension

From: [J]ustin
Disable the Security extension

Thanks!

From: [J]ustin
Disable the Security extension

… Or click ``always allow''… :p

Even after the 991 update (including smart 7.2) it's still not putting in login details for me.. Any Ideas? it just sits there after entering the transfer thread.

Having said that I diabled smart and forced a login on it and it picked up and tried to log me in in chat after asking me if I wanted a stats account. Very strange.

This is Silent Spys SilentSpinner script which has been updated

Gj all who worked on it.

Great job everyone thanks for all the hard work now if i only hadn't stayed up all night playing League of Legends id install it and get it going hahah

Am I the only one who got problem with sps in lunar isle? Is it broken or is it the map thats outdated :/

Im not a programmer, I have been trying to learn this stuff. But now with everything broken Im even more confused.
All scripts I try to load do something like this.

Exception in Script: Unable to find file 'ObjectDTM/ObjDTMInclude.simba' used from 'C:\Simba\Scripts\TheCuttingEdge v0.5.simba'
[Error] C:\Simba\Includes\srl/srl/misc/smart.simba(53:19): Invalid number of parameters at line 52
Compiling failed.

any ideas what I can try?

From: rsbottman
Im not a programmer, I have been trying to learn this stuff. But now with everything broken Im even more confused.
All scripts I try to load do something like this.

Exception in Script: Unable to find file 'ObjectDTM/ObjDTMInclude.simba' used from 'C:\Simba\Scripts\TheCuttingEdge v0.5.simba'
[Error] C:\Simba\Includes\srl/srl/misc/smart.simba(53:19): Invalid number of parameters at line 52
Compiling failed.

any ideas what I can try?

Redownload the ObjDTM include again :)

Awesome release!

Working perfectly for me, great work guys!!

[Error] C:\Simba\Includes\srl/srl/misc/paintsmart.simba(41:33): Unknown identifier 'SmartGetDebugDC' at line 40
Compiling failed

help pls any1? ive tried like everything i could think of..

HUGE thanks to Brandon, Spent WELL over 1 hour trying to get my SRL to work, everything is FINALLY sorted. Thank-you so much Brandon for all the work you have done.

From: [J]ustin
HUGE thanks to Brandon, Spent WELL over 1 hour trying to get my SRL to work, everything is FINALLY sorted. Thank-you so much Brandon for all the work you have done.

LOL Compiling smart on his comp was a pain!! Had to get him to restart so his Javac was recognized. Wizz he can confirm that the current plugins do NOT work unless compiled yourself so yes indeed smart needs recompiling/re-upping whenever you have some time.

Honestly if it wasn't for the plugins, it'd be like a 2 minute fix.. just install simba, update includes via the menu and you're good to go. That is if the smart plugin worked.

From: Brandon
LOL Compiling smart on his comp was a pain!! Had to get him to restart so his Javac was recognized. Wizz he can confirm that the current plugins do NOT work unless compiled yourself so yes indeed smart needs recompiling/re-upping whenever you have some time.

But yet again, I was able to run SRL\Smart on my VM fine without needing to compile my own smart… :redface:

From: [J]ustin
But yet again, I was able to run SRL\Smart on my VM fine without needing to compile my own smart… :redface:

LOL Iunno why. Guess VM's are different. Maybe a permissions issue. For windows itself though it won't start unless compiled :c stupid pairing clients crap.

<3 Justin recompiled my smart and it works fine now thanks again.

Yeah I had to compile the plugin's to get it to work as well.
Brandon, can't you just upload the newly compiled smart here ? and people can then just download it and put it in the're plugin's folder. I thought it might be easier like.

Edit: I just read what you said on the post above. So everyone will have to compile them selves for it to work ? until ben fixes that problem ?

These are the plugins I compiled on windows 7 32bit, try them if you get the pairing client error.

Edit: I removed the plugins download because the real problem has been found and will be sorted out soon.
Glad I got to help you Bolshak25 :)

From: Jakkle
Yeah I had to compile the plugin's to get it to work as well.
Brandon, can't you just upload the newly compiled smart here ? and people can then just download it and put it in the're plugin's folder. I thought it might be easier like.

Edit: I just read what you said on the post above. So everyone will have to compile them selves for it to work ? until ben fixes that problem ?

These are the plugins I compiled on windows 7 32bit

I just sent Joe my plugins and they worked fine.. W7 64bit -> W XP 32bit

Justin TVd me and got my Simba working on my super slow XP machine. So I'm pretty sure it'll work with anyone else :D. Justin is a legend.

From: Jakkle
Yeah I had to compile the plugin's to get it to work as well.
Brandon, can't you just upload the newly compiled smart here ? and people can then just download it and put it in the're plugin's folder. I thought it might be easier like.

Edit: I just read what you said on the post above. So everyone will have to compile them selves for it to work ? until ben fixes that problem ?

I would have compiled it and uploaded it but I don't want anyone saying "omg my account got hacked".. and pointing fingers at me so I left that for Wiz/Ben to do. That's the only reason I didn't upload it myself.

From: Joe
Justin TVd me and got my Simba working on my super slow XP machine. So I'm pretty sure it'll work with anyone else :D. Justin is a legend.

Brandon is a legend*

He is the one who showed me

[Error] C:\Simba\Includes\SRL/SRL/misc/paintsmart.simba(41:33): Unknown identifier 'SmartGetDebugDC' at line 40
Compiling failed.

any one has any idea the fix to this?

From: [J]ustin
I just sent Joe my plugins and they worked fine.. W7 64bit -> W XP 32bit

I think it's just windows 7 having the problem

From: Brandon
I would have compiled it and uploaded it but I don't want anyone saying "omg my account got hacked".. and pointing fingers at me so I left that for Wiz/Ben to do. That's the only reason I didn't upload it myself.

Ah good point. Well I ain't got a clue what to do when it comes to hacking because I don't wanna do it lol. Anyway I've uploaded them to hopefully save people some time ;)

From: raees
[Error] C:\Simba\Includes\SRL/SRL/misc/paintsmart.simba(41:33): Unknown identifier 'SmartGetDebugDC' at line 40
Compiling failed.

any one has any idea the fix to this?

If you look around that has been answered already.

From: Jakkle
Yeah I had to compile the plugin's to get it to work as well.
Brandon, can't you just upload the newly compiled smart here ? and people can then just download it and put it in the're plugin's folder. I thought it might be easier like.

Edit: I just read what you said on the post above. So everyone will have to compile them selves for it to work ? until ben fixes that problem ?

These are the plugins I compiled on windows 7 32bit, try them if you get the pairing client error.

thank you! finally got it working again

SRL_SixHourFix won't currently works because Jagex changed Color Count on screen. Currently session ended color amount is 763. (Same as wrong password on old one, I still need to check it out) Should be easy fix.

~Home

Build of the current master branch: https://github.com/downloads/BenLand100/SMART/SMARTv7.2_flagchange.zip

But honestly, that flag shouldn't fix this bug. I suspect the problem is in SRL's implementation but I haven't had a chance to look.

If you really want to be daring, switch to the next branch and build v8.0 and test that for me. It has almost the same usage as v7.2, but completely different backend and can start the other rendering modes (though everything except safemode is useless for grabbing colors).

E:
IF YOUR DEBUG HAS THIS LINE IN IT:
Library: 0
It means that smartremote[32|64][.exe|] FAILED to find libsmart[32|64].[dll|so]
That should not be fixed by this SMART version. It's related to the FIRST argument passed to SMART which is the path to the Simba's Plugins folder which should be where all of the files are. If that path is wrong, then the error is expected.

From: [J]ustin
Brandon is a legend*

He is the one who showed me

The legend passed down from a legend :D

From: BenLand100
Build of the current master branch: https://github.com/downloads/BenLand100/SMART/SMARTv7.2_flagchange.zip

But honestly, that flag shouldn't fix this bug. I suspect the problem is in SRL's implementation but I haven't had a chance to look.

If you really want to be daring, switch to the next branch and build v8.0 and test that for me. It has almost the same usage as v7.2, but completely different backend and can start the other rendering modes (though everything except safemode is useless for grabbing colors).

Sweet, I will give V8.0 a go :)
Does that mean we can get DXInterception working with smart now ?

From: Jakkle
Sweet, I will give V8.0 a go :)
Does that mean we can get DXInterception working with smart now ?

Yes, it does. As long as you don't need color information (that interception can't provide)

By downloading the new SMART does that mean unzipping bianaries to the plug in folder? If so I did that and still am getting
"[Error] C:\Users\Alex Scholes\Downloads\JingleJewellery(v2.5).simba (1).simba(174:3): Unknown identifier 'Smart_Server' at line 173"

Any help is much appreciated!

From: johnarnts
By downloading the new SMART does that mean unzipping bianaries to the plug in folder? If so I did that and still am getting
"[Error] C:\Users\Alex Scholes\Downloads\JingleJewellery(v2.5).simba (1).simba(174:3): Unknown identifier 'Smart_Server' at line 173"

Any help is much appreciated!

Replace that whole section of the script (all the stuff beginning with Smart, there should be 4 in that area) witht this:

{$IFDEF SIMBAMAJOR980}//<--- THIS
  Smart_Server := 0;
  Smart_Members := False;
  Smart_Signed := True;
  Smart_SuperDetail := False;
  {$ELSE}//<--- THIS
  SRL_SIXHOURFIX := TRUE;
  SMART_FIXSPEED := TRUE;
  {$ENDIF}                

From: BenLand100
Yes, it does. As long as you don't need color information (that interception can't provide)

Nice one. Okay.

From: johnarnts
By downloading the new SMART does that mean unzipping bianaries to the plug in folder? If so I did that and still am getting
"[Error] C:\Users\Alex Scholes\Downloads\JingleJewellery(v2.5).simba (1).simba(174:3): Unknown identifier 'Smart_Server' at line 173"

Any help is much appreciated!

Your still using the old setup.
Replace these,

  Smart_Members := False;
Smart_Server := 11;
Smart_Signed := True;
Smart_SuperDetail := False;

with this,

  SRL_SixHourFix := True;
Smart_FixSpeed := True;

Edit: got ninja'd

So it turns out that Wizzup renamed libsmart32.dll to libsmart.dll and that's why smartremote32.exe couldn't find the library. If you change libsmart.dll to libsmart32.dll it should work fine, no need to dl smart again or anything.

From: BenLand100
So it turns out that Wizzup renamed libsmart32.dll to libsmart.dll and that's why smartremote32.exe couldn't find the library. If you change libsmart.dll to libsmart32.dll it should work fine, no need to dl smart again or anything.

I was thinking this when I first saw the plugins that come with simba but before now it never mattered about the 32 for me, the old way they both worked.

From: Jakkle
I was thinking this when I first saw the plugins that come with simba but before now it never mattered about the 32 for me, the old way they both worked.

Well, if you {$I libsmart} Simba will check for libsmart.dll first, then libsmart32.dll (if you're windows 32 bit), however smartremote32.exe does NOT use that same fallback and expects it to be named the way I shipped them. Wizzup renamed it to overwrite the libsmart.dll from older versions, but didn't consider that the name was important for another part of the program ;)

From: BenLand100
Well, if you {$I libsmart} Simba will check for libsmart.dll first, then libsmart32.dll (if you're windows 32 bit), however smartremote32.exe does NOT use that same fallback and expects it to be named the way I shipped them. Wizzup renamed it to overwrite the libsmart.dll from older versions, but didn't consider that the name was important for another part of the program ;)

That's because the cpu bits shouldn't be. ;)
I'll fix this in a bit.

Glad the problem was resolved in the end

my rs window wont even pop up when i click run :/

Great job with the update.

Ran a script to test how well it works (especially passed the 6 hours).

Used an LRC gold miner w/ bank

Time Running: 9 Hours, 23 Minutes and 53 Seconds
Ores Mined: 4553
Experience Earned: 240950
Experience/Hour: 28400
Ores/H: 481

From: Toxcicity
Great job with the update.

Ran a script to test how well it works (especially passed the 6 hours).

Used an LRC gold miner w/ bank

Time Running: 9 Hours, 23 Minutes and 53 Seconds
Ores Mined: 4553
Experience Earned: 240950
Experience/Hour: 28400
Ores/H: 481

Did it pass for you? For me it didn't, because of SRL Login was faulty on detecting the Game Session ended screen.

I can now compile my script thanks to Kevin33 and Jakkle! :)

But there's still a problem, when I run the script, a new tab opens, called globals. And I get this error:
Error: Exception: The bitmap[0] does not exist at line 550

Does the plugins follows with the Simba 991 update? Or do you have to do it manually?
I got no clue on how to update plugins. :( Because that might be the problem. :(

Help would be appreciated. Thanks :)

From: Home
Did it pass for you? For me it didn't, because of SRL Login was faulty on detecting the Game Session ended screen.

Yes, I'm currently on the 10 hour mark :)

From: dextro
I can now compile my script thanks to Kevin33 and Jakkle! :)

But there's still a problem, when I run the script, a new tab opens, called globals. And I get this error:
Error: Exception: The bitmap[0] does not exist at line 550

Does the plugins follows with the Simba 991 update? Or do you have to do it manually?
I got no clue on how to update plugins. :( Because that might be the problem. :(

Help would be appreciated. Thanks :)

The plugin update should happen alongside SRL update after you enable the extension and update it. If it doesn't work simply download the .zip folder and unzip it straight into Simba/plugins and move & replace all the conflicting folders.
If you get permission issues while doing this you can try moving your plugin folder onto you desktop then extracting the zip and then moving the plugin folder back into c:/simba

~Caotom

From: dextro
I can now compile my script thanks to Kevin33 and Jakkle! :)

But there's still a problem, when I run the script, a new tab opens, called globals. And I get this error:
Error: Exception: The bitmap[0] does not exist at line 550

Does the plugins follows with the Simba 991 update? Or do you have to do it manually?
I got no clue on how to update plugins. :( Because that might be the problem. :(

Help would be appreciated. Thanks :)

Just update everything through the simba menu extensions

I was getting that line 550 bitmap error yesterday while making a script, for me it was that I was compiling before adding SetupSRL; in the mainloop… no idea if yours would be the same.

K time to explain something.. Running multiple clients in one or more Simba's/Tabs.

Smart Remote is working like this:

If NO scripts are running, when one script is ran, Smart will pair to whichever client has the lowest ID/PID and is unpaired.

When you run another script, whether it's in a new tab or a new simba, a new smart will SPAWN ONLY IF:

1. No smart's are running.
2. A smart is running but is currently in use by a Simba or Simba-Tab.

Otherwise it will steal control of whatever smart is active but not in use. So.. If you have two Smart's open and no scripts running, whichever gets ran first will get first choice of which smart it wants.. So yes.. no need to report it as a bug.

You can try it by running this in two different tabs:

{$DEFINE SMART}
{$I SRL/SRL.Simba}

begin
  {$IFDEF SMART}
    SRL_SixHourFix := True;
    Smart_FixSpeed := True;
  {$ENDIF}

  SetupSRL;
  repeat
    MMouse(Random(500), Random(500), 0, 0);
    Wait(1000);      //The repeat loop simulates a script's main loop. This keeps Smart from unpairing.. Thus another tab/simba cannot steal it.
  until(false);
end.

please help me out guys,
btw i use {$I SRL/SRL.scar} only
whenever i try to compile my scripts i got this errors with a new open tab call (leo) and the errors below

Warning: In file C:\Users\User\Desktop\Simba\Includes\SRL/SRL/core/text.scar: at row: 605, col: 7, pos 23424: ChooseOption is NOT accelerated
[Error] C:\Users\User\Desktop\Simba\Includes\SRL/SRL/core/antirandoms/leo.scar(441:29): Unknown identifier 'Leo_AnalyzeCoffin2' at line 440
Compiling failed.

From: xathao
please help me out guys,
btw i use {$I SRL/SRL.scar} only
whenever i try to compile my scripts i got this errors with a new open tab call (leo) and the errors below

Warning: In file C:\Users\User\Desktop\Simba\Includes\SRL/SRL/core/text.scar: at row: 605, col: 7, pos 23424: ChooseOption is NOT accelerated
[Error] C:\Users\User\Desktop\Simba\Includes\SRL/SRL/core/antirandoms/leo.scar(441:29): Unknown identifier 'Leo_AnalyzeCoffin2' at line 440
Compiling failed.

Whatever you're trying to run is soooooooo outdated.. SRL doesn't use the scar include/extension anymore.

So I was trying to run two scripts at once earlier and the first script opened up a SMART and started running fine. Then I opened another Simba and pushed play, and it said that it had paired with the SMART client already running. That's all that happened though, meaning that I didn't see the 2nd script running anywhere. Can you tell me what I'm doing wrong and how to view the 2nd/multiple scripts? Thanks

EDIT: Sorry if your previous post had the answer, I must of misread it if it had

From: AustnW
So I was trying to run two scripts at once earlier and the first script opened up a SMART and started running fine. Then I opened another Simba and pushed play, and it said that it had paired with the SMART client already running. That's all that happened though, meaning that I didn't see the 2nd script running anywhere. Can you tell me what I'm doing wrong and how to view the 2nd/multiple scripts? Thanks

That sounds like you pressed Play on both of them while no smart's were spawned.
Was the second smart busy? Meaning was the script actually using it? Or was it just sitting there? Did you try the script I posted?

Open two Tabs, paste the script I posted. Press play on one and let it spawn a client. Go to the next tab and press play and it should spawn a client of it's own since the previous is busy/in-use.

I did what you said and yeah, they both opened up their own SMART.

So what I'm doing is, while having one script running on a SMART. I open another Simba with a new script (tried both different and same scripts), and push play, and another SMART doesn't pop up or anything.

So I tried doing the same thing again and it came up with another SMART for some reason… It seems like it has a 50/50 chance of doing what I said, and actually opening up a SMART. At least for me 'o.o. So i guess that's good for now.

The only other problem I have atm is when I try to run a certain script this message comes up:

Error: Exception: The Points you passed to DrawATPA exceed the bitmap's bounds at line 90
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, 4]

I'm pretty sure I updated the script right so idk what the problem is

From: Brandon
Whatever you're trying to run is soooooooo outdated.. SRL doesn't use the scar include/extension anymore.

so how can i fix my rsps scripts to work again ?

From: xathao
so how can i fix my rsps scripts to work again ?

That RSPS script uses Scar.. it's not for Simba at all so there is no fixing for that. You need the scar include that you had with it..

For the other guy.. You have a bitmap that is out of range.. If you have teamviewer, pm me your id and pass and i'll check out what you're talking about.

Warning! You passed a wrong ye to a finder function: 620. The client has a height of 606, thus the ye is out of bounds. Setting the value to 605 (h-1) for now.

I'm running a non-RS script I made. and as of today this is the error I'm getting. I was getting others but I managed to fix those. Just wondering if anyone knows what I need to do to fix this.

I cant get any scripts to compile right :c

I'll try to explain it as best as i can first, also I'm not the only one that has the problem, so I don't think that it's the script. The script is Warrior's Blackjack Basher, and before the Simba/SRL update (and of course the social slayer update), it worked fine. Only things I changed are the changes on your thread:

http://villavu.com/forum/showthread.php?t=84334

The script begins by opening up your xp counter, then hovering over your thieving skill, it's after it hovers of the skill that the error pops up:


Then the script stops of course

From: AustnW
I'll try to explain it as best as i can first, also I'm not the only one that has the problem, so I don't think that it's the script. The script is Warrior's Blackjack Basher, and before the Simba/SRL update (and of course the social slayer update), it worked fine. Only things I changed are the changes on your thread:

http://villavu.com/forum/showthread.php?t=84334

The script begins by opening up your xp counter, then hovering over your thieving skill, it's after it hovers of the skill that the error pops up:

Then the script stops of course

Of course it stops.. I just tried it.. He's trying to draw a box that isn't even on Smart's Canvas.[LEFT]

MMy1 - 10; //His code..
MMY1 = 8 //Globals.simba..
8 - 10 = -2. //How can you draw a box at -2? 

I will add the failsafes.. That way if out of bounds drawing occurs, it will clip. I'll send it as a pull in a couple minutes after testing it.


[/LEFT]
The only reason it worked before was because you were allowed to draw off canvas (it simply didn't draw that part). With set persistent memory, passing the wrong drawing points doesn't work. Only thing I can do is put failsafes in the SmartGraphics.Simba to fix your out of bounds problems.

As for the other guy I doubt that script has been running for ages.. I had to correct so many syntax errors that it was ridiculous.. Your if statements have no "Then's", missing brackets and semicolons everywhere.. Plus it's using the SCAR include.. SRL hasn't used that for ages!! So there is no way that, that script has been working in SIMBA before the update unless you were using a very very very old Simba + Scar Include.

@brandon
there got to be a way i can bot again….
i bot almost every night and still work the other nights b4 the updates…i mostly bot on ess mining on rsps and now wont work
plus my simba version is 0.98
and this video is made by me showing my fighter script in rsps
http://www.youtube.com/watch?v=9Zhwg34GaHE –> skip to minute 2 in video
ps. look at date upload on youtube

From: xathao
@brandon
there got to be a way i can bot again….
i bot almost every night and still work the other nights b4 the updates…i mostly bot on ess mining on rsps and now wont work
plus my simba version is 0.98
and this video is made by me showing my fighter script in rsps
http://www.youtube.com/watch?v=9Zhwg34GaHE –> skip to minute 2 in video
ps. look at date upload on youtube

I'm not saying you can't bot.. I'm saying you cannot USE SCAR SCRIPTS in SIMBA.. This isn't scar..
I don't know what to tell you other than write that script for Simba for your Private Server.. If you need help porting a scar script to Simba I don't mind helping but don't try running scar scripts in Simba.. It simply doesn't work. They use different functions.

I'm not going to tell you that the script worked before because it simply couldn't have been possible unless you had an include AND Simba from years ago.


Also for you guys that understand the drawing out of bounds, would you recommend me try catching all the drawing functions or would you rather do that yourself..

I personally thing it's the user's job to do this and make sure they're drawing on smart at the right positions but if everyone wants it then I have no problem adding it..

From: Brandon
I'm not saying you can't bot.. I'm saying you cannot USE SCAR SCRIPTS in SIMBA.. This isn't scar..
I don't know what to tell you other than write that script for Simba for your Private Server.. If you need help porting a scar script to Simba I don't mind helping but don't try running scar scripts in Simba.. It simply doesn't work. They use different functions.

I'm not going to tell you that the script worked before because it simply couldn't have been possible unless you had an include AND Simba from years ago.


Also for you guys that understand the drawing out of bounds, would you recommend me try catching all the drawing functions or would you rather do that yourself..

they're easy to do, when i make that video i go to a different client:)
which make it out of bounds, but anyway
how can i get my old scripts to work again without the {$I SRL/SRL.scar}
in the script for rsps

From: xathao
they're easy to do, when i make that video i go to a different client:)
which make it out of bounds, but anyway
how can i get my old scripts to work again without the {$I SRL/SRL.scar}
in the script for rsps

The out of bounds comment wasn't for you.. You're the one using the Scar script right?

Well this is the Simba version of that exact script.. I haven't changed the logic.

program Fighter;
{$I SRL/SRL.Simba}

var
  Npc: Integer;

function ClickNpc: Boolean;
var
  x, y: Integer;
begin
  x := MSCX;
  y := MSCY;
  if (FindColorSpiralTolerance(x, y, 4410553, 0, 0, 799, 599, 1)) or (FindColorSpiralTolerance(x, y, 3478172, 0, 0, 799, 599, 1)) then
  begin
    Writeln('Found npc');
    MMouse(x, y, 4, 4);
    Wait(100);
    begin
      begin
        Mouse(x, y, 3, 3, True);
        Result := False;
        wait(8000)
      end;
    end;
  end else
    Writeln('Couldn''t npc');
end;

function ClickFoodsInv: Boolean;
var
  x, y: Integer;
begin
  x := MSCX;
  y := MSCY;
  if FindColorSpiralTolerance(x, y, 6123913, 596, 259, 784, 517, 5) then
  begin
    Writeln('Found foods');
    MMouse(x, y, 4, 4);
    Wait(100 + Random(100));
    begin
      Mouse(x, y, 0, 0, True);
      Result := True;
    end
  end
  else
    Writeln('Couldn''t find the color of the foods');
end;

function LogOutt: Boolean;
begin
  wait(30000);
  Mouse(734, 564, 2, 2, true);
  begin
    Wait(600);
    Mouse(734, 415, 2, 2, true);
    result := True;
  end
  WriteLn('Logged Out');
end;

function KillSwitch: Boolean;
var
  CloseBankWin, x, y: Integer;
begin
  CloseBankWin := BitmapFromString(25, 16, 'meJxllI1ugkAQhH31RiJYfvoOTR' + 'UsKFRLoeBh0trnaucY2LtyyeSynO7HzF6O4LULJvWiuLjaj0HeJ+f' + 'vpByg+Ki2+RXr+Hh7Ot8p7AQWyk8/FsCJmRsRhV5B8RGye/20wfq7' + 'Wmkb5YAVNQsRGqmwvCWVVlSN3i4/0fheGtjsakFRqLEfloMQbCUVX' + 'SmiwpOKtQbxhnYva/ysERRDuYIxcPBr+HZPqi+4AsegcuMK/9Goo2' + 'IxE5QIrraFCg4dBJSk00CEHVG2eF6WGUUn4OhTGzmT8t7f1aQl40z' + 'EgHfopDauCgVFeQ+hfZ225MTHK7NgMi6KNS3JJtsFRUV6GhOKs9WG' + 's2aBYig9wLlxva9tjtAmzmzJdQVOxLM4dP6+XhBslHvEZlZZK2ZQM' + 'BRoDDhB5sviooKs5RkxyJQIF4oRrF5Xrit7Jlg3L+9mR19S3fV4Uo' + 'uPQFzcXIhlpl0MZJ213v8rbzSjkEviC+rh+SIQy4ZxElnfIi/7/AO' + '3e+tL');
  if FindBitmapToleranceIn(CloseBankWin, x, y, 5, 439, 511, 558, 30) then
  begin
    Writeln('Script Terminated!');
    begin
      Logoutt;
      Wait(500);
      Result := True;
    end
  end
  else
    Writeln('Couldn''t Terminate');
  FreeBitmap(CloseBankWin);
end;

procedure TurnScreen;
begin
  KeyDown(VK_RIGHT);
  Wait(2500);
  KeyUp(VK_RIGHT);
end;

begin
  SetupSrl;
  ActivateClient;
  Wait(500);
  repeat
    if KillSwitch then
      TerminateScript;
    repeat
      if ClickNpc then
      begin
        Wait(8000);
      end;
      Writeln(ClickNpc);
      Npc := Npc + 1;
    until (ClickFoodsInv) or (Npc >= 10);
    if Npc >= 10 then
    begin
      TurnScreen;
    end;
    Npc := 0;
  until (false);
end.

Brandon, I uploaded new plugins that should fix the issue. They don't have the patched flag, but I copied libsmart.dll to libsmart32.dll. (So they're identical now). Previously libsmart32.dll didn't exist.

From: Wizzup?
Brandon, I uploaded new plugins that should fix the issue. They don't have the patched flag, but I copied libsmart.dll to libsmart32.dll. (So they're identical now). Previously libsmart32.dll didn't exist.

:) Yay! No more PM's about paired client fail. I'll test them. Going to grab yours and see.

Also what do you think about the out of bounds drawing? Should users watch where they're drawing or do we take care of it for them?


EDIT: Btw.. everyone who has simba now, Just press Update from the SRL menu.. Wizzup's plugins are flawless!! They work on the first try 100% of the time!

From: Brandon
The out of bounds comment wasn't for you.. You're the one using the Scar script right?

Well this is the Simba version of that exact script.. I haven't changed the logic.

program Fighter;
{$I SRL/SRL.Simba}

var
  Npc: Integer;

function ClickNpc: Boolean;
var
  x, y: Integer;
begin
  x := MSCX;
  y := MSCY;
  if (FindColorSpiralTolerance(x, y, 4410553, 0, 0, 799, 599, 1)) or (FindColorSpiralTolerance(x, y, 3478172, 0, 0, 799, 599, 1)) then
  begin
    Writeln('Found npc');
    MMouse(x, y, 4, 4);
    Wait(100);
    begin
      begin
        Mouse(x, y, 3, 3, True);
        Result := False;
        wait(8000)
      end;
    end;
  end else
    Writeln('Couldn''t npc');
end;

function ClickFoodsInv: Boolean;
var
  x, y: Integer;
begin
  x := MSCX;
  y := MSCY;
  if FindColorSpiralTolerance(x, y, 6123913, 596, 259, 784, 517, 5) then
  begin
    Writeln('Found foods');
    MMouse(x, y, 4, 4);
    Wait(100 + Random(100));
    begin
      Mouse(x, y, 0, 0, True);
      Result := True;
    end
  end
  else
    Writeln('Couldn''t find the color of the foods');
end;

function LogOutt: Boolean;
begin
  wait(30000);
  Mouse(734, 564, 2, 2, true);
  begin
    Wait(600);
    Mouse(734, 415, 2, 2, true);
    result := True;
  end
  WriteLn('Logged Out');
end;

function KillSwitch: Boolean;
var
  CloseBankWin, x, y: Integer;
begin
  CloseBankWin := BitmapFromString(25, 16, 'meJxllI1ugkAQhH31RiJYfvoOTR' + 'UsKFRLoeBh0trnaucY2LtyyeSynO7HzF6O4LULJvWiuLjaj0HeJ+f' + 'vpByg+Ki2+RXr+Hh7Ot8p7AQWyk8/FsCJmRsRhV5B8RGye/20wfq7' + 'Wmkb5YAVNQsRGqmwvCWVVlSN3i4/0fheGtjsakFRqLEfloMQbCUVX' + 'SmiwpOKtQbxhnYva/ysERRDuYIxcPBr+HZPqi+4AsegcuMK/9Goo2' + 'IxE5QIrraFCg4dBJSk00CEHVG2eF6WGUUn4OhTGzmT8t7f1aQl40z' + 'EgHfopDauCgVFeQ+hfZ225MTHK7NgMi6KNS3JJtsFRUV6GhOKs9WG' + 's2aBYig9wLlxva9tjtAmzmzJdQVOxLM4dP6+XhBslHvEZlZZK2ZQM' + 'BRoDDhB5sviooKs5RkxyJQIF4oRrF5Xrit7Jlg3L+9mR19S3fV4Uo' + 'uPQFzcXIhlpl0MZJ213v8rbzSjkEviC+rh+SIQy4ZxElnfIi/7/AO' + '3e+tL');
  if FindBitmapToleranceIn(CloseBankWin, x, y, 5, 439, 511, 558, 30) then
  begin
    Writeln('Script Terminated!');
    begin
      Logoutt;
      Wait(500);
      Result := True;
    end
  end
  else
    Writeln('Couldn''t Terminate');
  FreeBitmap(CloseBankWin);
end;

procedure TurnScreen;
begin
  KeyDown(VK_RIGHT);
  Wait(2500);
  KeyUp(VK_RIGHT);
end;

begin
  SetupSrl;
  ActivateClient;
  Wait(500);
  repeat
    if KillSwitch then
      TerminateScript;
    repeat
      if ClickNpc then
      begin
        Wait(8000);
      end;
      Writeln(ClickNpc);
      Npc := Npc + 1;
    until (ClickFoodsInv) or (Npc >= 10);
    if Npc >= 10 then
    begin
      TurnScreen;
    end;
    Npc := 0;
  until (false);
end.

thanks Brandon,
you could have said
replace all my scripts {$I SRL/SRL.scar} with the new one {$I SRL/SRL.Simba} o.O

now im back to normal botting :)
will come back to villavu when i have problems with simba ;)

From: Brandon
Of course it stops.. I just tried it.. He's trying to draw a box that isn't even on Smart's Canvas.[LEFT]

MMy1 - 10; //His code..
MMY1 = 8 //Globals.simba..
8 - 10 = -2. //How can you draw a box at -2? 

I will add the failsafes.. That way if out of bounds drawing occurs, it will clip. I'll send it as a pull in a couple minutes after testing it.


[/LEFT]
The only reason it worked before was because you were allowed to draw off canvas (it simply didn't draw that part). With set persistent memory, passing the wrong drawing points doesn't work. Only thing I can do is put failsafes in the SmartGraphics.Simba to fix your out of bounds problems.

Ok, thanks for the explanation :)

Great work Wizzup, Brandon, BenLand, and all Else.
Most things are working just great, but when either opening a 2nd simba tab or opening a new simbla all together and trying to run a 2nd script (a 2nd SMART) I'm getting:

Plugin libsmartremote32 already loaded: 0
The DLL "libsmartremote" doesn't set a memory manager.
formWriteln: Compiled successfully in 688 ms.
SMART & SRL Loading...
formWriteln: SRL Compiled in 0 msec
Polling for SMARTs
Returning index 0
Attempting to connect to localhost:4200
Loading plugin libsmartremote32 at C:\Simba\Plugins\
Plugin libsmartremote32 already loaded: 0
EIOS Paired
Client possibly paired to us
Attempting to connect to localhost:4200
EIOS requested image buffer
formWriteln: Paired with SMART[2684]
Current Simba version: 991
Latest Simba Version: 991
Player count = 1
WithDrawMain: 28
WithDrawSeco: -1
formWriteln: CurrentPlayer = b johansen
formWriteln: AK Smelter v1.6.3
formWriteln:   By Narcle
Runescape Loading...
Logging in...
formWriteln: Current player: B Johansen
Player setup...
formWriteln:
formWriteln: Thanks for using my AK Smelter!
formWriteln: Please post proggies on forums!
formWriteln:  -Narcle
formWriteln: Successfully executed.
EIOS Unpaired

And no SMART opens up.
Simba 991, SMART 7.2, Brandon's SRL Repo

@ Yohojo that only shows one smart being loaded :S

Your script terminates right after and the result is: EIOS Unpaired.
Thus since the client is unpaired, it's a free for all.. Your second script will use it rather than spawning a new one.

Think of it like this:

A: Script 1 runs.. It terminates and leaves it's smart as a free for all, script two will take it's smart since it's not in use.
B: Script 1 runs.. it's still running, script two will spawn a new smart and use that instead of stealing from script 1.
Vice-versa occurs as well.. If you want two smarts, make scenario B happen. Inother words, make sure your script 1 is still running before starting script 2.

Ok, the problem I described before is back and it constantly happens now. I have one script running with one SMART up. I open another Simba/script and push play. It comes up at the bottom saying it paired with SMART client [insert number here]. That's still all it does and nothing else. Tried it with multiple scripts under a couple conditions. It's starting to be annoying, only running one script at once :duh:

From: AustnW
Ok, the problem I described before is back and it constantly happens now. I have one script running with one SMART up. I open another Simba/script and push play. It comes up at the bottom saying it paired with SMART client [insert number here]. That's still all it does and nothing else. Tried it with multiple scripts under a couple conditions. It's starting to be annoying, only running one script at once :duh:

I don't know what script you're using.. and if you want you can PM me and I'll respond there rather than filling up this thread with edited scripts as this really is supposed to be a release thread. Also the script you previously posted draws boxes out of bounds. It tries to draw on invisible space and that is not allowed. You can easily wrap your drawing code in a try catch end block.

wow it actually came out! Ill give it a go!

Haven't been around for the past two days but just want to thank you guys foll all the hard work you've been putting in. This includes Wizzup and everyone he gave credits to in the OP.

Great to see everything back up.

You efforts are really appreciated :)

Thanks a lot, you guys done a beautiful job
Just tried it out after all the updates, it works great and smooth

nice job guys on the release. keep up up the outstanding work!

Thank you very much. I'm glad the time was taken to ensure a smooth release. Now I can continue making progress with my first script :)

I have updated today and am having a few problems restricting me from running my own scripts.
I run all my programs from a script called 'Basescript' so at the start of each script I add {$include Simba/Scripts/BaseScript.simba} and it has been using the procedures from that script in the new one. However, with the update, this error message comes up "Exception in Script: Unable to find file 'Simba/Scripts/BaseScript.simba' used from 'C:\Simba\Scripts\Alching.simba'"
Any ideas?? btw hav updated and enabled all extensions

Thanks
Matt

From: Allanitis
I have updated today and am having a few problems restricting me from running my own scripts.
I run all my programs from a script called 'Basescript' so at the start of each script I add {$include Simba/Scripts/BaseScript.simba} and it has been using the procedures from that script in the new one. However, with the update, this error message comes up "Exception in Script: Unable to find file 'Simba/Scripts/BaseScript.simba' used from 'C:\Simba\Scripts\Alching.simba'"
Any ideas?? btw hav updated and enabled all extensions

Thanks
Matt

Check to see if your BaseScript.Simba file exists in that folder.. I also reference all my updated scripts from a script too:

{$I SRL/SRL.Simba}
{$I Simba/Scripts/Useful.Simba}

begin
end.

Why the .bak plugin renames?

Is it because of;

From: Wizzup?
Brandon, I uploaded new plugins that should fix the issue. They don't have the patched flag, but I copied libsmart.dll to libsmart32.dll. (So they're identical now). Previously libsmart32.dll didn't exist.

?

From: Le Jingle
Why the .bak plugin renames?

Is it because of;

?

Yes and because the updater changed.. It's easier to update plugins like this.. They just get deleted when you start a new session.

Have you noticed after a simba update you see something like Simba.old in the simba folder? Same thing. Also if something is wrong, just remove the .bak and :)

From: Brandon
Yes and because the updater changed.. It's easier to update plugins like this.. They just get deleted when you start a new session.

Have you noticed after a simba update you see something like Simba.old in the simba folder? Same thing. Also if something is wrong, just remove the .bak and :)

Uhm, they don't actually get deleted yet. But they aren't opened on a restart, so we can override them. Deleting them wasn't worth the effort at the time. ;)

How do i run past 6 hours now? am i going to have to wait for smart manager to update?

thanks for the quick work on it :)

EDIT: silly me,
SRL_SixHourFix := True;

SRL team is awesome!

Thx for the up!
But how do I update/where do I get the plugins?

E: currently ran a script and it just says that SRL compiled in x ms and nothing else happens..

Great work guys! Thanks a lot!

Add me to the list of fools getting the Paired issue where it a lot of the times steals the smart window from another simba that is already running.

From: krasniy
Add me to the list of fools getting the Paired issue where it a lot of the times steals the smart window from another simba that is already running.

You're not a fool. Your script is just terminating badly. A lot of ppl had this issue yesterday and had to restart their comps. Seems to happen whenever there are client zombies. Either kill all the smartremote processes or just restart your comp and try it. Just don't forcefully terminate your script.

Sorry about my stupidity but…..I can't even download this update? On the log screen it tells me that an update (991) is available, yet when i click Tools>Update it says I have the latest version. I forced an update anyway, but nothing changes. As for the reason why I am so adamant about getting said update, I have the same "client pairing" issue as everyone else, despite trying multiple uninstalls and "ghetto" fixes (i.e. I downloaded SMART v7.2 through Brandon's link). If it helps, I am on a Mac OS with the assistance of wine bottler.

From: Nickthundarr
Sorry about my stupidity but…..I can't even download this update? On the log screen it tells me that an update (991) is available, yet when i click Tools>Update it says I have the latest version. I forced an update anyway, but nothing changes. As for the reason why I am so adamant about getting said update, I have the same "client pairing" issue as everyone else, despite trying multiple uninstalls and "ghetto" fixes (i.e. I downloaded SMART v7.2 through Brandon's link). If it helps, I am on a Mac OS with the assistance of wine bottler.

Ok, try this quick. First, rather than updating through Simba simply download the the newest Simba from HERE I believe. Next, following Wizzup?'s exact instructions (with a couple additions) do this:

• Enable extensions.sex; update extensions.
• Close out Simba program, NOT from the black console box
• Open up Simba again, go to "View > Extensions" and enable (by double-clicking) Extensions, SRL and SPS. These you must enable, at least. You know they're enabled when they're highlighted in green.

• Next, go to "SRL > Check for Updates". Same with "SPS > Check for Updates".
• Let both of them finish completely, then close out Simba, NOT the black console box.
• Right-click on Simba.exe and choose "Run as Administrator". (Never open Simba through a script, always open Simba from the Simba.exe program)
• Open your script, compile so all your includes compile as well. If you did everything correctly there should be no errors. Then just run your script.

Nvm Flight answered.

Thanks for the assistance Flight! :) But..the procedure didn't quite help. For one, (I think it's b/c I'm on a Mac), I don't see that black console box; all I have is the simba client and a completely blank tab that I believe SHOULD be the console box. Second, when I enable sps.sex, it says "Error in SPS updater: Could not call proc". And lastly, I don't know how to run as admin on my Mac, but I am the only user. Still, I went through the procedure step-by step, uninstalling simba and reinstalling it with your guidelines, and I ended up with the same "fatal error client pairing" as before. But I really do appreciate your efforts, sorry if I wasted any of your time.:redface:

From: Nickthundarr
Thanks for the assistance Flight! :) But..the procedure didn't quite help. For one, (I think it's b/c I'm on a Mac), I don't see that black console box; all I have is the simba client and a completely blank tab that I believe SHOULD be the console box. Second, when I enable sps.sex, it says "Error in SPS updater: Could not call proc". And lastly, I don't know how to run as admin on my Mac, but I am the only user. Still, I went through the procedure step-by step, uninstalling simba and reinstalling it with your guidelines, and I ended up with the same "fatal error client pairing" as before. But I really do appreciate your efforts, sorry if I wasted any of your time.:redface:

Yes it might be due to you being on a Mac, although I'm not sure. I would recommend dropping a line to Wizzup?, he might know what the issue is and could probably give some good suggestions.

Nickthundarr, if you're not on Simba 991 then there's a fair chance the extensions won't work.

where do i find the smart 7.2? :o

Opening as adminstrator seemed to fix it.

From: zirokke
where do i find the smart 7.2? :o

Smart 7.2 will be downloaded when you update SRL.

From: Wizzup?
Nickthundarr, if you're not on Simba 991 then there's a fair chance the extensions won't work.

I actually can't even update to 991, my version right now is stuck at 0.99 (downloaded from installer). Is it possible if you could offer me a link to download 991 directly?

Guys i need some advice please.

I DID what flight just said above and thankfully i got MSI finally running!

but when i try to use other scripts i get these errors.


[Error] C:\Simba\Includes\srl/srl/misc/Smart.simba(53:19): Invalid number of parameters at line 52
Compiling failed.
[Error] C:\Simba\Includes\srl\srl\misc\Smart.simba(56:19): Invalid number of parameters at line 55
Compiling failed.

Can some1 help me pls? i can use teamviewer as well if your willing to=]

I downloaded the new simba991 about 3 days ago and it worked fine for me, but from yesterday after an automatic srl update I again have a issue with my coordinates. It is once more off by 50. I have not downloaded any other srl.simba file or anything.

Am I the only person with this problem?

Should I be using any settings in the script to use the new clientarea?

Like

SetupSmart(False);

and then continue with normal script, or is this supposed to work as default without any additional settings.

I have just uninstalled smart deleted all directories and reinstalled it, doing all the updates and I still have the 50 off target coordinates problem.

Any advice? If there is any additional settings, where can I get documentation explaining it and how to use it and set it up for correct use?

Thanks in advance

simba 911 has some performance issues, its using 30% cpu (smart+simba), before it used about 10-20% :(

is this just me?

No, it's not just you. It's using a ton more CPU than before, good 30% more for me. The bugging with restarting scripts and it taking over clients is annoying as hell too. I haven't touched simba again due to that, it's just too buggy and irritating to bother with when there are better alternatives.

Why do I get this error:

[Error] C:\Simba\Scripts\kbLumbyWillow.simba(168:1): Unknown identifier 'Smart_Server' at line 167
Compiling failed.

http://puu.sh/MLc4

From: KeepBotting
Why do I get this error:

[Error] C:\Simba\Scripts\kbLumbyWillow.simba(168:1): Unknown identifier 'Smart_Server' at line 167
Compiling failed.

http://puu.sh/MLc4

http://villavu.com/forum/showthread.php?t=84334

From: CephaXz
http://villavu.com/forum/showthread.php?t=84334

Nevermind, got it. Thanks. And this update focking rocks!

Replace it with Platform Specific Simba 0.99x or Backwards Compatibility.

From: ziellos
No, it's not just you. It's using a ton more CPU than before, good 30% more for me. The bugging with restarting scripts and it taking over clients is annoying as hell too. I haven't touched simba again due to that, it's just too buggy and irritating to bother with when there are better alternatives.

I'm pretty sure you can disable the remote behavior. At least, you should be able to.

From: Wizzup?
I'm pretty sure you can disable the remote behavior. At least, you should be able to.

How would I go about doing that? For example if you run 4 scripts and one gets a random which would require a restart of the script, it'd force you to start all of them again because it'll attach to the wrong smart. There's no way they'd work after 6 hours either since they random attach to smarts. It works fine if you start them all, they make their own smarts and work correctly, it's just a random, script error, or restarting would screw them over and you'd need to close and re open all of them.

Sigh.. if you want it to pair to only a specific client then in your script, after smart spawns just put: PairSmart(ClientID) after setupsrl.

I can't see why that's happening to you guys at all. If Smart is already paired to a client there should be absolutely no way that it could pair to that client again..

For anyone having that problem I'll teamviewer you if you wish.. Just PM me with the ID and temp pass.

I will not be fixing scripts for you though. Just checking your smart and java to see if everything is as it should be.

Does the smart client id change after 6 hours? Or will it stay the same one until I close it manually?

Im trying to update sps but i don't see it in my extensions

K well I just tested everyone on someone's comp.. It's not SRL.. It's smart.

1. It returns invalid counts.. Lets say I have 3 clients spawned and only 2 are paired (1 is unpaired). SmartGetClients(True) will return 3. This means it's saying that 3 of them are unpaired -__- That's incorrect. Only 2 are paired.

2. SmartPairClients is pairing to already paired clients. According to Ben's thread smart isn't supposed to do this:

A controller can pair with a client if it is unpaired, and maps its shared memory

Either it's smart or simba that's causing that. Either way, there is nothing more I can do via SRL to fix that for you guys. Smart is loaded exactly how Ben's thread has it. Only difference it that it writes it's parameters in the debug box. That's it.

I've tried it on someone else's comp as administrator so it can't be a permissions problem. Works fine on Linux.

I have all the latest updates, Uninstalled and reinstalled everything, but I still have a 50 offset problem.

Can anyone help me with this? Do I need to provide the setclient coordinates?

When I do a FindObjTPA, it finds the object but clicks 50 units off the target.

Also with MouseBox it is 50 units off, it also seems that my uptext is also off by 50 units.

I have downloaded from the the first thread http://nala.villavu.com/downloads/master/902397653ce75df9d6b726824196b4fdeba892c5/SimbaInstaller.i386-win32.exe

I need some help here.

Thanks.

From: VastlySuperior
I have all the latest updates, Uninstalled and reinstalled everything, but I still have a 50 offset problem.

Can anyone help me with this? Do I need to provide the setclient coordinates?

When I do a FindObjTPA, it finds the object but clicks 50 units off the target.

Also with MouseBox it is 50 units off, it also seems that my uptext is also off by 50 units.

I have downloaded from the the first thread http://nala.villavu.com/downloads/master/902397653ce75df9d6b726824196b4fdeba892c5/SimbaInstaller.i386-win32.exe

I need some help here.

Thanks.

Are you using the latest version of SMART? I tried setclientarea with 6.10 but it did not work. Btw are there any ways to disable the smart remote behavior.. I've tried many different ways but it spawned smart 6.10c which will not work with the current SRL.

EDIT: 6.10c does not have the correct dimension for the nav bar also.

I'm another satisfied punter.

All 4 of my bots have been running the latest Simba/SMART/SRL/SPS for over 72 hours and they're still going strong. No errors or login failures as yet.

Great work fellas. Do you have a compliments forum? :)

Nice work you put together guys, but I still have a minor problem, have been searching for the solution for the past two days lol.

I keep getting this error.

[Error] C:\Simba\Includes\SRL/SRL/Misc/SMART.simba(56:19): Invalid number of parameters at line 55

line 55 states:

 SmartSendKeys(S);  

I updated everything like Brandon stated in a few posts back.
Have gone through lots of threads but couldn't really find it.

Sorry for being noob!

From: Cwil
Im trying to update sps but i don't see it in my extensions

Enable extensions.sex and update your extensions. Then, restart Simba and enable sps.sex.

From: Arepirpi
Are you using the latest version of SMART? I tried setclientarea with 6.10 but it did not work. Btw are there any ways to disable the smart remote behavior.. I've tried many different ways but it spawned smart 6.10c which will not work with the current SRL.

EDIT: 6.10c does not have the correct dimension for the nav bar also.

I`m using smart 7.2 and the smart itself does not give me any problems, but I have read a few posts back Brandon said that he has tested it and it seems smart has a problem when opening more than two bots at a time as it will take over one of the smarts that was already in use.

I also read on a post this morning some one has firgured a way to prevent that by putting his scripts he wants to run for each bot in a separate sub folder from where he runs it and then they don`t take each other over when running more than two bots from one simba. Can`t remember in which thread I have read it otherwise I would have given the link to it. Do a search for smartremote and see what it brings up.

I think I will need to go back to Brandons srl with my own uptext function to get the coordinates to work correctly. It is a pain and I don`t know why it is only with me that this is happening.

I even deleted all older simba`s to make sure that it does not launch from a older version but still no success. It is also not a outdated script from which I am running but from a script I`m writing myself. So the problem can`t be there.

I still did not figure the problem with S.M.A.R.T ,it just load brand new window or try to use old one,everytime i restart script for example. Pretty weird…

And second problem is with mouse it has offset everywhere…+50, really hard to make new scripts… since oyu have to add everywhere -50

formWriteln: SRL Compiled in 16 msec
C:/Simba/Plugins/smartremote32.exe
Shared Memory mapped to 0x44
Trying port 4200
Remote socket listening
Failed to pair - No client by that ID
Failed to pair - No client by that ID
Failed initial socket pairing
Failed to pair - No client by that ID
Failed to pair - No client by that ID
Failed to pair - No client by that ID
Failed to pair - No client by that ID
Failed to pair - No client by that ID
Current Simba version: 991
Latest Simba Version: 991

Weird error ;x

SRL_EnableNavBar is not working? I am still getting offset!

const
default = 'Font name here'
-----
//myBtn\\
  myBtn:=TButton.Create(MyForm);
   with  myBtn  do
     begin
       Parent:=MyForm;
       Caption:='JustButton';
       Left:=33;
       Top:=174;
       Width:=75;
       Height:=25;
       OnClick:=@YourClickProcedure;
       Font.Name:=default;
       Font.Color:=clDefault;
       Font.Size:=0;
   end;

That construction isn't working now for TButton. Type mismatch in line: Font.Name:= default. But that construction works for all other components.

anyone else getting over 9000 rs tabs opened up by smart/simba in web browser where i think it accidently clicks view messages?

thanks for any replys :)

hey im having a slight problem with this it is giving me this error failed to set up player
it logs me in just fine banks my stuff but for some reason it wont fish for me it just stands around clicking in the green boxes that are no where near the fish spots
any help?

I keep getting this error: [Error] C:\Simba\Includes\SRL/SRL/misc/smart.simba(53:19): Invalid number of parameters at line 52
Compiling failed.

I know i have to update the script but i don't understand how.

From: Cwil
I keep getting this error: [Error] C:\Simba\Includes\SRL/SRL/misc/smart.simba(53:19): Invalid number of parameters at line 52
Compiling failed.

I know i have to update the script but i don't understand how.

http://villavu.com/forum/showthread.php?t=84334

I Still have the 50 offset problem. Included you will see a picture of it finding the object I`m looking for but then it clicks on the object to select it it is off by 50. Can someone please tell me what is going on? This update was supposed to fix this and everyone else is saying it works for them. Why then is my Simba991 and smart 7.2 screwed? I have all the latest updates as well as plugins.


Here is the code I use to find and click on the object.

  if (CountItems('dtm', DTM_SoftClay, []) <> 0) then
    Begin
      x:=MSCX;  // This is the Center Of the Main Screen Where Your Character is standing at the moment
      y:=MSCY;  // The Search for your object will start from this location outwards in a spiral
      WriteLn('Looking For Pottery Wheel');
        If FindObjTPA(x, y, 9079697, 6, 1, 15, 60, 50, ['ott']) then
        Begin
        WriteLn('Found Wheel');
          While IsMoving do
          Begin
            Wait(100);
          End;
        Case random(2) of
          0:  Begin
                WriteLn('Left Clicked Potters Wheel The First Time');
                GetMousePos(x,y); // Get Mouse Current Position
                mouse(x, y, 5, 5, True); // Left Click On Potters Wheel
                Wait(1000 + random(400));
                While IsMoving do
                Begin
                  Wait(50);
                End;
                WriteLn('We Have Clicked The Potters Wheel The First Time');
                WriteLn('We are now waiting for the Options Screen to appear.');
                WriteLn('Waiting Now for 1 second');
              End;
          1:  Begin
                WriteLn('Right Clicked Potters Wheel The First Time');
                GetMousePos(x,y); // Get Mouse Current Position
                mouse(x, y, 5, 5, False); // Right Click To Bring Up Options
                WaitOption('Form', 500); // Wait A Certain X Amount Of Seconds Before Clicking Option
                Wait(1000 + random(400));
                While IsMoving do
                Begin
                  Wait(100);
                End;
              End;
        End;
      End;
  End;

From: VastlySuperior
I Still have the 50 offset problem. Included you will see a picture of it finding the object I`m looking for but then it clicks on the object to select it it is off by 50. Can someone please tell me what is going on? This update was supposed to fix this and everyone else is saying it works for them. Why then is my Simba991 and smart 7.2 screwed? I have all the latest updates as well as plugins.


Here is the code I use to find and click on the object.

As far as I know from talking to Brandon a lot, GetMousePos is weird and doesn't work…try editing it to where you aren't using that.

From: shstiger2009
As far as I know from talking to Brandon a lot, GetMousePos is weird and doesn't work…try editing it to where you aren't using that.

The offset was removed from getmousepos for various reasons. It messes up all other mouse functions and does the incremental offsetting (by double the offset). It stacks with other offsets.

Atm, GetMousePos is ALMOST never needed unless it is a custom mouse function that you created.

don't know if this is a simba or a smart problem but when you try to start another bot it pairs with you first bot instead of opening a new smart window

this problem seems to happen if you changed script on one of you simbas

@Krisg05 - From my understanding that is a problem with SMART at present.

@OP - Try this, it is exactly your function without GetMousePos, should still work fine and not have the weird y-axis offset anymore..

if (CountItems('dtm', DTM_SoftClay, []) <> 0) then
    Begin
      x:=MSCX;  // This is the Center Of the Main Screen Where Your Character is standing at the moment
      y:=MSCY;  // The Search for your object will start from this location outwards in a spiral
      WriteLn('Looking For Pottery Wheel');
        If FindObjTPA(x, y, 9079697, 6, 1, 15, 60, 50, ['ott']) then
        Begin
        WriteLn('Found Wheel');
          While IsMoving do
          Begin
            Wait(100);
          End;
        Case random(2) of
          0:  Begin
                WriteLn('Left Clicked Potters Wheel The First Time');
                mouse(x, y, 5, 5, True); // Left Click On Potters Wheel
                Wait(1000 + random(400));
                While IsMoving do
                Begin
                  Wait(50);
                End;
                WriteLn('We Have Clicked The Potters Wheel The First Time');
                WriteLn('We are now waiting for the Options Screen to appear.');
                WriteLn('Waiting Now for 1 second');
              End;
          1:  Begin
                WriteLn('Right Clicked Potters Wheel The First Time');
                mouse(x, y, 5, 5, False); // Right Click To Bring Up Options
                WaitOption('Form', 500); // Wait A Certain X Amount Of Seconds Before Clicking Option
                Wait(1000 + random(400));
                While IsMoving do
                Begin
                  Wait(100);
                End;
              End;
        End;
      End;
  End;

hope u guys doin well would like to see simba win over the next bot nuke!

Nice !!

From: Wizzup?
Hello everyone.

I've released Simba 991 which is basically Simba 0.99 with *SetClientArea functions.

I have also merged Brandon's changes for SRL, I've updated the plugins and I have updated the extensions.

Lots of updates, make sure you're fully up to date before trying a script!

The way you should update:

• Update Simba to 991
• Enable extensions.sex; update extensions.
• Restart Simba.
• Update SRL, MSI, SPS, Plugins.

~Wizzup

E: I think some credit is due, by the way.
Brandon: You did an amazing job. You're a testing machine. ;) And you've written a lot of code too. You're awesome, thanks for all your work.
Coh3n & Silent & Ninja: Testing and realising this all.

E2: Let's hope this works, by the way. I didn't test the latest SRL; but I assume it worked because others were positive about the merge.

E3: List of issues that need to be addressed:

• Colour picker coordinates cannot be pasted into the script right away.(They need the same offset as the client) We need to make it simple to pick colours for a specific area.

wheres the link to download simba 0.991??

http://nala.villavu.com/downloads/simba-prev/a9c68dcf15dde9c75531ddeaa5c98ac342442b45/

From: henrik30796
wheres the link to download simba 0.991??

Did you not read the post you quoted at all? If you have Simba 0.99 then all you need to do is press the "update" button under Extensions, wait for it to update, then restart Simba then update MSI, SRL, and SPS. Then viola, you have Simba .991

If you don't have Simba .99, then well.. the link to download it is also in your quote…

Ok, so I just started using Simba today because RSbot seems permanently down.

I have 991 fully updated and all, but I cant get a single script to run correctly. Apparently 911 is very new and I cant find a single script that has been formatted to run on it. After a bit of reading, basically what I found is that nothing is working simply because the y- co-ordinates are all off?

I was told I either need to wait for everyone to update their scripts or I could manually update them myself. Now, I'm no scripter by any means.. I've studied some C++ and I run linux and that's all the background knowledge I have.

So, my question here is how do I manually update these scripts? Can I just search out all the y- co-ordinates and reduce them by 50 or is it a much more extensive process that I have no hope of accomplishing with my limited knowledge of java?

[Error] Z:\home\thedoctor\Downloads\sps_soul_wars (1).simba(43:35): Unknown identifier 'MMCX' at line 42
Compiling failed.

I have also tried running sps soul wars from within runescape_other as directed. I get the same result.

Also, for AOI Powerchopper v0.9:

[Error] C:\Simba\Includes\SRL/SRL/misc/smart.simba(53:19): Invalid number of parameters at line 52
Compiling failed.


This seems to be a recurring issue, I have no idea what's wrong here. Was told I needed to update the script manually or wait for everyone else to do it. I'm not that patient, so any help would be greatly appreciated, thank you.

From: Brandon
The offset was removed from getmousepos for various reasons. It messes up all other mouse functions and does the incremental offsetting (by double the offset). It stacks with other offsets.

Atm, GetMousePos is ALMOST never needed unless it is a custom mouse function that you created.

Well, the offset wasn't really removed but rather inverted. So normal mouse pos (60 60) would be (10 10) with area on (50 50).

Running MSI…
ERROR in TMThread.LoadFile
Exception in Script: Unable to find file 'C:\Simba\Includes\SRL/SRL/core/chat.simba' used from 'C:\Simba\Includes\srl/srl.simba'

Help please =D

EDIT: Now this is what happens:
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, 28]
File[C:\Simba\Includes\MSI\Debug Logs\07-08-12 at 09 10 54 PM.txt] has not been freed in the script, freeing it now.

+ a new tab called login comes up and there is an error on line 927 ( if (Length(Players[CurrentPlayer].WorldInfo) > 0) then)

What time can Simba be normal use?

From: touchmoney
What time can Simba be normal use?

How do you use Simba abnormally?

I got these two error logs.

This one I got several times.

Program exception! 
Stacktrace:

Exception class: EAccessViolation
Message: Access violation
  $0041D86B
  $0041D95D
  $00565241
  $005650AD
  $7665C4E7
  $76675855
  $766759F3
  $76675BE3
  $7665C4E7
  $7665C5E7
  $76655294
  $76674F6C
  $7667535A
  $7666EA2B
  $767C9DCC
  $767C9F24
  $767AA1F7
Simba Version: 991

This one only once.

Program exception! 
Stacktrace:

Exception class: EAccessViolation
Message: Access violation
  $00669B93
  $0066931F
  $00501678
  $0040C37A
  $005804CF
  $7665C4E7
  $7665C5E7
  $7665CC19
  $7665CC70
  $005115A5
  $00421D09
  $0042214F
  $004334F3
  $0042210A
Simba Version: 991

Not sure why, but every time i try and update simba to 991, it gets stuck at 77%(every time). and refuses to work. Left it up for an hour to see if it would do anything , and nothing. can anyone help?

if it gets stuck loading just start it over sometime it happens to me too

I got this error when trying to run a script:

Exception in Script: Conditional statement not properly closed at line 17, column 11 in file "C:\Simba\Includes\MSI\MSI\Core\Setup.simba"

From: nyuszyman
I got this error when trying to run a script:

Exception in Script: Conditional statement not properly closed at line 17, column 11 in file "C:\Simba\Includes\MSI\MSI\Core\Setup.simba"

MSI is outdated. Use the amazing scripts found on here instead ;)

From: Wizzup?
Hello everyone.

[*]Color picker coordinates cannot be pasted into the script right away.(They need the same offset as the client) We need to make it simple to pick colours for a specific area.

Hey Wizzup, I have suggestion, since everywhere else color picker coordinates works well.. Maybe we should have another color picker exactly for RS client which automatically subtracts 50px from Y coordinates (client header). And makes coordinates correct for rs client and we still be able to get from any non rs related clients with current one. Feel free to use icon in any case.

From: Laimonas171
Hey Wizzup, I have suggestion, since everywhere else color picker coordinates works well.. Maybe we should have another color picker exactly for RS client which automatically subtracts 50px from Y coordinates (client header). And makes coordinates correct for rs client and we still be able to get from any non rs related clients with current one. Feel free to use icon in any case.

That's actually a really good suggestion. What should the shortcut be?