SRL Archive - RS3 Outdated / Broken Scripts

I NEED AN ACCOUNT FOR FURTHER DEVELOPMENT ! YOU WILL GET MY SCRIPT FIRST

Wildy Runite Miner v 1.4

Start script in Edgeville bank with rune pick axe, equipped or on inventory.


Settings :

Graphic options :
Brightness – > Maximum

Requirements :

ObjDTM
http://villavu.com/forum/showthread.php?t=68112
SPS
http://villavu.com/forum/showthread.php?t=73103

Bugs :

Walking from Mine to Bank is buggy


To Do :

Better Progress report
Fix bugs, please report



Help is appreciated from more experienced scripters :)

This is incredible for a user with 45 posts! :) I'm impressed.

Although, you could work on your standards. The code is very difficult to read.
Also, try to find things that can shorten your code, making it more pleasant for eye, example:

  MouseEquippedItem('weapon', 3);
  if WaitUptext('ickaxe', 500) then
  begin
    result := true;
    end
  else
  result := false;

// Can be shortened to
MouseEquippedItem('weapon', 3);
Result := WaitUptext('ickaxe', 500);

^ oh thank you, didnt know u could do that :P , oh i made a wood cutting script before called WOTCutter back in 08 .

Cool!


I started one of these a while back, just never finished.

I may have to test this out.. :stirthepot:

Lol world switching seems quite familiar, though its not good way to do switching.

From what I saw, it's pretty nice. :) Just gotta work on your standards and shorten things as marpis has said.

I know this is a dumb question. But how do i add this into my simba? Like so i am able to run it ive looked through the tut's and havnt found out how.

From: B R O W N Y
I know this is a dumb question. But how do i add this into my simba? Like so i am able to run it ive looked through the tut's and havnt found out how.

Copy and paste it in Simba.

I did but it only stays on one line.

I know I have to copy and paste this into simba to run but do I have to rewrite anything other then my user pass and loads and stuff? Can you please be specific becasue I will use this script and post proggies if I can get it to work.

add atpa and you should beable to apply for members:P

lol i forgot to make progress reports =/ and wats atpa

TPAs: http://villavu.com/forum/showthread.php?t=49067 or http://villavu.com/forum/showthread.php?t=21786

From: I Am Legend
lol i forgot to make progress reports =/ and wats atpa

BUG found: When it trys to log onto world 106 (no prot item pvp world) It does not say its a pvp world under the worlds but when you try to log in it gives you the message. The script will just keep looping trying to log into that world. My suggestion on how to fix: make it so that if you get that message "you will not be able to protect items in the wildernerss" just have it try a diffrent world instead.

From: B R O W N Y
BUG found: When it trys to log onto world 106 (no prot item pvp world) It does not say its a pvp world under the worlds but when you try to log in it gives you the message. The script will just keep looping trying to log into that world. My suggestion on how to fix: make it so that if you get that message "you will not be able to protect items in the wildernerss" just have it try a diffrent world instead.

walking and everything else working fine for u ? and yes i know abt the bug prolly fix in future .

I havnt had to bank yet. I died once and terminated and restarted the script. I will see if it works after a full inv. How would you be able to fix the bug? I tried changing "uptoworld" to 105. And that did nothing.
EDIT: also added a few mor colors to the rune ores.
DOUBLEEDIT: also it keeps saying "sps failed" when it tries to walk somewhere. I think walking is broken period. if i have more then 14 ore. It will keep saying this:
contains 21 ores
SPS failed .
contains 21 ores
worked
contains 21 ores
at mine
end of mining loop
contains 21 ores

Also just tryed to start it in edgy bank and it walked about to 10 wildy then just started relogging constantly.

hmm i think what happend was that u walked all the way to the mines just after edgville where the skeleton was , and the walkign failed, then since there is a mine symbol there it detects it as Mine site and then switches world to look for rune ores, simlply to put it , the walking is a bit of a mess cuz of sps its not very accurate im not sure how to fix this maybe an alternative walking method which im looking into now.

I'm glad to see you released it publicly. Hopefully get some assistance with that walking. I did attempt starting it in the wilderness as you suggested, but after mining SPS failed (as seems to be the main flaw) Good to see your looking into other walking methods, I'm not sure how well radial walking (I believe its called) would work here but possibly take a loot into that? Just going off of things I have heard of. Our deal still stands though once I can run this to go to mine and back at least 3-5 times I will provide you with 5 runite miners, and you already have full access to the one I gave you for testing. Figured it might make you more comfortable about the deal if I said it publically for all to see rather than only in private messages. :) thanks a lot and good luck

It mines it fine once it figures out where its at. And it world hop's perfectly besides that damn 106. It just doesnt walk to or back to mine.

From: B R O W N Y
It mines it fine once it figures out where its at. And it world hop's perfectly besides that damn 106. It just doesnt walk to or back to mine.

Yes he has done a wonderful job of the mining procedures, and I believe he may have borrowed/modified the world hopping but besides 106 its all incredible. I knew when I suggested someone make this script that walking would be the most difficult due to SPS not performing as desired. I must commend I am legend though on his creativeness, so far extending to using the blue arrow from the world map to assist in the walking to/from rocks. With this kind of creativeness in tackling the walking issue, I am sure we will soon see a beautifully functioning runite miner, which I believe will be one of the most profitable scripts on the site. With others lack of knowledge of Simba/SRl, even with many returning after the end of reflection/injection bots, I do not see the users of this community affecting prices. I personally will do all I can to put rune ore back at 15kea. Rune armor prices would increase back to their old roughly 200k/set, and a majority of f2p prices in my opinion revolve around rune. Rune ore prices rise equals a rise in a large part of the rest of the economy

WELP. I wont see em going up if you have like what 10 accounts? There wont ever be any ore available for the rest of the cummunity:b

This is a great script, awesome use of enums bud :)

From: B R O W N Y
WELP. I wont see em going up if you have like what 10 accounts? There wont ever be any ore available for the rest of the cummunity:b

There was a debate about this on the powerbot forums. When you factor in all of the possible rune spawned, 10 accounts mining rune received less than 1% of the total rune ore available, therefore I don't believe I will have much effect on anything. I don't want to do the math again let me see if I can dig up the post

found it:
————————————————–

If you do the math, as we have,
lets just say for example, he has 15 accounts running, and i have 10 (pulling values from my ass).
25 accounts.
If we make an average of 15 - 20 ores per hour, per account,
thats only 375 rune ore an hour, or 9000 per day if all bots run flawlessly 24 hours (randoms, server problems, bad luck, ect) which wont happen all the time.

If we look at how much rune can be spawned per day;
there 176 (f2p and p2p locations) worlds, 5 rocks (2 wilderness, 3 resource dungeon) at upto 3 spawns per hour (average),
thats 2640 spawns per hour on 2 locations.
Then you have 83 worlds (p2p only locations), 5 rocks (1 neitiznot, 2 heros guild, 2 keldagrim) at upto 3 spawns per hour (average).
Thats 1245 spawns per hour on 3 locations.

So thats 3885 spawns per hour, in 1 24 hour period of time, thats 93,240 rune per day that cant be mined and sold.
In 1 month , thats 2,797,200 rune.

I doubt 9000 rune is going to prevent you all from getting the 84 thousand rune thats left being unmined everyday, or the
270,000 every month will stop you from getting some of the 2.5 million other rune that can be mined.

Cmon man, you cant be mad. It also helps to have 10gb ddr3 ram as I do.


———————————-

Now I understand this is only for wilderness mining while that script covered literally every rune rock in the game, still the damage done by bots is minimal, and I am not stupid enough to ever lower the price of what I am selling so I would not cause a crash

Okay i gotcha now. AND yours (accounts) are probably f2p along with me. One quick question though. How you get 10 accounts to run at once? Do you use VPS? Or how?

From: B R O W N Y
Okay i gotcha now. AND yours (accounts) are probably f2p along with me. One quick question though. How you get 10 accounts to run at once? Do you use VPS? Or how?

Honestly if I have a functioning runite miner I keep them all p2p. more people pking in f2p than p2p I used the option on the old script to not even enter f2p worlds, so I would not affect you in any way. But I do have a gateway fx i7 (computer) with 8 gigs of ram. I can run upwards of 15 accounts when I desire. On powerbot I could run 35 with the less cpu options and all

added a new version should work much better now

on first walk to rune rocks i was killed by another player, and it didn't seem to detect the "you are dead" in the chatbox, just tried running north still along the wall. Restarted and it has so far walked to the rune rocks, although it did walk up to the volcano. Not a big issue as it walked down, but possibly a future update slightly more accurate walking there. heres screenie of that:


afterwards it managed to walk to the edge of the lava maze prior to getting lost, right here:



Manually finnished the walk to mine, restarted script, world switching and mining fine I will monitor the walking and post any other hotspots I find.

EDIT: It managed to mine the 14 ore, and after a few restarts of the script at rune rocks SPS caught on and managed to walk me back to edgeville wildy just out of site of the wilderness wall. I navigated with one click closer to the wall, it managed to reconfigure itsself and cross it, but once inside the bank the mouse seemed to be unable to find the bankers. Kept hovering over doors and sections of carpet and stuff like that. Not sure if thats script side of if something about edgeville bank needs to be updated.

Same excat thing happend to me as stated by omegaangelz. I do like how you have updated it though. Thanks alot(:

the bank include has to be updated , and i do not know why it did not detect you are dead , the problem im having with being dead is that srl randoms detect it first and log off … Will keep working on it until its perfect :)

From: omegaangelz
Honestly if I have a functioning runite miner I keep them all p2p. more people pking in f2p than p2p I used the option on the old script to not even enter f2p worlds, so I would not affect you in any way. But I do have a gateway fx i7 (computer) with 8 gigs of ram. I can run upwards of 15 accounts when I desire. On powerbot I could run 35 with the less cpu options and all

How do you run SIMBA multiple times on the same cpu??

Hmmm.. It always seems to get stuck at level 5 wilderness for me and keep logging me out/in thinking it is at the mine and it is looking for ore..

Please let me know if anyone else has this issue or if they know how to fix it without manually running to the mine?

Also.. How can you run SIMBA multiple times on the same cpu?

File a bug report and it will get fixed eventually or post more details like what it says etc. To run multiple accounts on the same cpu you must open simba twice or for however many accounts you wish to use.

From: kevin33
File a bug report and it will get fixed eventually or post more details like what it says etc. To run multiple accounts on the same cpu you must open simba twice or for however many accounts you wish to use.

Yup going to file the bug now and include more info on it.

For some reason when I open up the second simba and run the msi it will get to the runescape page but doesn't log me in or anything?

From: Jordan155
Yup going to file the bug now and include more info on it.

For some reason when I open up the second simba and run the msi it will get to the runescape page but doesn't log me in or anything?

Ok. Should be fixed soon If I could fix it I would. I need someone to teach me how to script and stuff first. This script doesnt use MSI it is not an MSI script. Never used it but I dont think MSI needs to be loaded to use it as far as I know. Will use it soon when i get 85 mining. You just copy and paste it fill in ur details and launch script and it should work if you have multiple simbas up :P Gl let me know how it turns out.

Anxiously awaiting the next update! Glad to see the comment of you'll keep at it until its perfect! :) as you have seen ill always provide you with detailed bug reports with as much detail as I can to assist in correcting the issue, and if possible from my minor programming knowledge make a few minor suggestions to help tackle an issue. Im still wowed by your idea of possibly using the blue arrow that was just so creative whether it worked or not that's thinking outside the box!

Wilderness has been graphically updated (the wall and colors), script doesn't seem to be able to walk past the wall or in the wildy.

lawls ….. more work today ^^

damnit I just got on to see the new update, and since the iron miner is working I was hoping this would be unaffected too, nice to know your working! if it would help to use my level 113 with 99 mining for testing that might speed things up while running your tests, hes in negative membership credit right now but that should be resolved within a day or two

going to test and post results/bugs.

for now:

started at edge bank, walked to ditch, and was walking around but not crossing it then i did it manualy and it walked a little and then stoped to walk, opened inventory, pointed over pickaxe and did nothing.

SRL Compiled in 16 msec
SMART Initialized.
Loaded: Server 1, Members: False, Signed: True, Super Detail: False.
Welcome to Runescape.
********
at mine
contains 0 ores
contains 0 ores
worked
contains 0 ores
lost
0
end of mining loop
we are lost
contains 0 ores
not in wild
found ditch
 SPS failed .
contains 0 ores
worked
contains 0 ores
lost
0
end of mining loop
we are lost
contains 0 ores
detected in wild
cant find dtm
contains 0 ores
worked
contains 0 ores
lost
0
end of mining loop
we are lost
contains 0 ores
detected in wild
cant find dtm
contains 0 ores
worked
contains 0 ores
lost
0
end of mining loop
we are lost
contains 0 ores
detected in wild
cant find dtm
contains 0 ores
worked
contains 0 ores
lost
0
end of mining loop
we are lost
contains 0 ores
detected in wild

hmmm try starting script again, because it should normally say at bank .

legend you left your account details on the submission i will pm you with new password =)

Hello Mr I Am Legend,

I did look at your script and although I don't understand the TPA parts, you are right, that is semi-blind walking and as stated above, if you get killed or randomized or go off track, you will continue to walk blindly while the client "thinks" it is still on track.

You could definitely implement my type of DTM-only walking, it is going to be a lot of points but by making a procedure, it shouldn't be too much of a problem and definitely make your script shorter/lighter/faster. If it doesn't find the next DTM, a backwards failsafe checking for most DTMs like mine should get you back on track. I would definitely enjoy helping you out with the walking but I just ask that you wait until next Wednesday since I got 4 College Finals on Tuesday that I have to prepare for and take.

My failsafe should prove helpful on those Wild levels in which you can't no longer teleport for a "start over" but for the worst case scenario, I use home teleport as my last resort to fix up in case the client is totally lost. Would it be asking to much from your users to have them be on the Ancient Spell Book so that they can hometele into Edgeville, so that if it is completely lost, it walks south until lvl 20 wildy or the wildy that allows you to home teleport and then teleport, if not, you would have to make it so when it gets to lumbridge, it climbs to the bank, withdraws Glory, teleports to Edge, banks Glory for keeps, and then continues with the script.

Looks mind blowing as far as I can see, will try and run it once I get more computer time. =)

One last note, if my concept script goes off course, it is because I should have more DTMs than I actually do or your DTM was incorrectly formated, if you don't go cheap on the amounts DTMs, your walking procedure should by no means get you lost and if lost, it should get you back on track in couple seconds with the failsafe. You can always load them before walking and free them once you are at the rock to keep the memory usage down and prevent possible crashes ^.^ got to remember to avoid those ugly memory leaks =) I'll contact you next Wednesday, good luck until then

One question Demise, I thought while in the wild if you home teleported it took you back to edgeville? I might be mistaking this for high risk wilderness worlds only. Your question of the users being on ancients causes a dilema as most of the accounts I have provided him for testing were level 3 or 4 with 85-90 mining. Although I just gave him a level 99 to test with, I do not believe it has completed desert treasure. I look forward to seeing your assistance in the script though, I am Legend has done a wonderful job so far but that walking blindly is a bitch I'm sure

From: omegaangelz
One question Demise, I thought while in the wild if you home teleported it took you back to edgeville? I might be mistaking this for high risk wilderness worlds only. Your question of the users being on ancients causes a dilema as most of the accounts I have provided him for testing were level 3 or 4 with 85-90 mining. Although I just gave him a level 99 to test with, I do not believe it has completed desert treasure. I look forward to seeing your assistance in the script though, I am Legend has done a wonderful job so far but that walking blindly is a bitch I'm sure

I don't venture much into the wilderness since truly I don't have a reason to go into it. I only go in there for Penguin Hunting but I agree that DT is somewhat of a very high requirement specially for pures, and being level 3(low combat) is essential since it will keep high-level pkers from attacking you in deep wild. If it does hometeleport into edge, that would be wonderful. If it doesn't, going from lumby to lumby bank and doing the glory routine I suggested above should get the player back to edgeville even if it is using normal spellbook provided the user has enough charged glories left. I was thinking of V teleport but then varrock has 2 places you can teleport into, the GE and V fountain, simple DTM check could tell the bot where they are but overall, Glory to Edge would be a more efficient method.

the issue is that all testing accounts are f2p. I'm going to pm you some details Demise

Pm'd you back and help Legend test the script out for bugs. After I help him out I will probably be helping someone else I promised to help and then work on my own scripts.

Legend, I will be on to teach you DTMs the latest Wednesday afternoon depending on traffic, meanwhile you could look over your script and correct things in regards with Standards, the cleaner your code, the faster I can read what is going on, the sooner we'll have this script walking flawlessly =)

Talked to omega and about the script having to be compatible with F2P accounts, we going to have to make it walk from lumbridge to edgeville through path near draynor manor[to avoid gates] so you better be ready, you'll be many a lot of DTMs ^.^

if u die it respawns in edgeville lol .

Yes but if it gets lost, what you going to tell it, die? ^.^

Anyways, with the right points it shouldn't get lost.

Now beginning to experiment with my method and the new flags, once I have it down working, ill send you pm to set a scripting session. I can make it find 2/6 flags so far, got to check why it doesn't find 3rd DTM, probably a small mistake, will keep you updated.

How on earth do I actually use this script because I cannot seem to be able to figure out how to actually post this into Simba, all that happens is it highlights a line and tells me that the script could not be compiled.

copy the whole script, and paste it into simba, but the walking does not work properly at the moment, it is being updated.

amazing script, ur walking paths r flawless. quick question, is this p2p only(or can notice member and only use mem worlds?)

From: Mink
amazing script, ur walking paths r flawless. quick question, is this p2p only(or can notice member and only use mem worlds?)

I think you meant only use free worlds? Pretty sure its programmed for f2p only as all testing accounts I gave him were f2p. The walking paths are flawless though as in the script actually walks to the mine and back for several trips? as I have yet to get it to complete one since last attempt and there has been no update to the script since them I am curious how this is.

I've tested the script on my 99 Mining skiller, the walking is very nice. I guess you're using DTM walking?

It doesn't seem to detect the mining animation though, because when my character is mining it will click the rock again or click on another rock. Maybe try looking into this and see if you can get it sorted out.

Other than that, solid script, can see you've put a lot of time and effort into it!

Well done! :)

This hasn't been equiped with DTM walking, I am waiting on a world map with start and end marked on it, so I know where does it actually have to walk to

Does this script work for you guys? because for me it just crosses the ditch and logs out :/

is this safe to use? what if i get killed in edge

From: luve cooking
is this safe to use? what if i get killed in edge

Use at your own risk. Dont bring anything your not willing to lose. Other then that yes it is safe. If you get killed.. you get killed.

ok holiday over and got a new tv, so script working for who ? and what are the current problems .. I will work on it

Well the script Doesn't run I start it at the at the edge bank it runs to the ditch and it Tries to cross it but it doesn't actually cross it If you could send me your msn name or aim i could give you the problem's in greater detail.
Thanks.

Error: Type Mismatch at line 1217
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap]

How was your holiday legend? The script still crosses the ditch for me mainly, its just that walking. How is the progress on DTM walking? I believe I just read him request a world map pic with the path drawn, do you still have the path I drew you or shall I make him another copy of that

Lol

From: Cyan
Lol

what kind of wasted post is this?

sorry guys for the long wait , i stuffed up my partition while installing ubuntu -.- so i lost alot of the work ive done , so now i have to go back to the hard copy that i pasted in the front page ….

how much cash per hour do you think I could get with this at 96 mining???

doesn't work.

I Am Legend, check out my tutorial on DTMs, you can probably do the walking yourself now =)

sorry to bitch on my first post, but I got this error and have no clue..

Unknown identifier 'SmartSaveSettings' at line 144

i'm testing your script, but i have encounterd a bug,
if the script has just switched worlds, but there are no ores to be
it gives an error:

World 134 selected.
at mine
Error: Type Mismatch at line 1217
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap]

edit : nvm wat i said

[Error] D:\Simba\Includes\sps/sps.simba(136:34): Unknown identifier 'MMCX' at line 135
Compiling failed.

help???

Script has not been updated to SRL5 Im guessing.

sadface. he should probs update it.

That he should. You know, you could update it yourself if you were to look up how.

yeahh i dont know how to do any of this im super new.

From: churado
yeahh i dont know how to do any of this im super new.

I will update it and send you a copy of the script to use. I will pm you it though. Legend will update it for everyone else when he wants.

kevin, are you allowed to send a copy of the script. I'd get his permission first.

From: Kyle Undefined
kevin, are you allowed to send a copy of the script. I'd get his permission first.

Was just about to pm him :) Thanks for that

v1.3

http://paste.villavu.com/show/FBR63LG2LbBVv7yuplM4/ ,

screw front page update , if anyone really needs this they can find it here

From: I Am Legend
v1.3

http://paste.villavu.com/show/FBR63LG2LbBVv7yuplM4/ ,

screw front page update , if anyone really needs this they can find it here

Thatta boy! If someone wants it that bad, they should find it :3

Lol. Ok never mind. Dont need to pm people. They can just find the link.

For some reason the script would run me up to the mine from the bank and then not find the ore over and over, switch world, not find ore, and then it repeated.

oh really , did they update the ore colours , tell me what it says in ur debug

Interesting script! How many ores do you think it can mine per hour? And whats the longest proggy you have atm?

Now it just gets stuck while it tries to hop over into the wildy..

Send me a PM if you would like debug info.

From: daily500
Now it just gets stuck while it tries to hop over into the wildy..

Send me a PM if you would like debug info.

Are you even using the correct version? He posted v1.4 in previous posts.

From: I Am Legend
v1.3

http://paste.villavu.com/show/FBR63LG2LbBVv7yuplM4/ ,

screw front page update , if anyone really needs this they can find it here

You sir are in fact a legend thank you

From: XxX Toxin XxX
Are you even using the correct version? He posted v1.4 in previous posts.

Yes I'm using 1.3, I double checked and that was the newest version he had posted.

From: daily500
Yes I'm using 1.3, I double checked and that was the newest version he had posted.

look a few posts up?

From: I Am Legend
v1.3

http://paste.villavu.com/show/FBR63LG2LbBVv7yuplM4/ ,

screw front page update , if anyone really needs this they can find it here

the link won't load for me, could you please PM me the code?

yea, link doesnt work though managed script on the first page to work :D

EDIT: it just works, but it has really strange walking route, I know a lot better one, and probably easily scripted.

Is this script working anymore, cant get it to work :/

Yes it works, just may be a little buggy. Make sure you have the latest version.

ay kevin, I clicked the link that was v1.3
but then some error that it wouldnt run
It said the error in cmd
UNable to find file in objectDTM etc.. Exception in Script: Unable to find file 'ObjectDTM\ObjDTMInclude.simba' used from ''

Post the whole error and I will see if I can solve it. If I cant, I am sure someone else will come to the rescue.

I posted it up there in edit Exception in Script: Unable to find file 'ObjectDTM\ObjDTMInclude.simba' used from ''

From: Chrisatrone
ay kevin, I clicked the link that was v1.3
but then some error that it wouldnt run
It said the error in cmd
UNable to find file in objectDTM etc.. Exception in Script: Unable to find file 'ObjectDTM\ObjDTMInclude.simba' used from ''

You don't have the Object DTM include, use the search button to find the thread with how to install it.

Yes do what Pat said, and you didnt at first, u edited it in :)

Installed it using this guide http://villavu.com/forum/showthread.php?t=68112
Still same error, done everything he said :/

Save it to extensions in your simba file. You may have to go to Simba, open extensions, and allow ObjectDTM.sex. I am not certain on that though.

I did
enabled it through the extensions
Still error fml

i get a error when trying to run

Exception in Script: Unable to find file 'ObjectDTM\ObjDTMInclude.simba' used from ''
Exception in Script: Unable to find file 'ObjectDTM\ObjDTMInclude.simba' used from ''

Download the objectDTM extension in the first post, save it to extensions, open simba, open extensions, enable it and it will work

for those who cant find the last version

Thank you so much!!!! i cba to get the mining level required for turmoil(im making 30 def turmoil pure atm). But yeah bro great script .. All hail simba! new generation of Bots:D

does this script work?

is this still working?

**Woot** 250posts

Question to ppl who have used this?
Don't you get pkd like ALL the time?

How to make it go Member worlds only because its empty there, its going free worlds;/ and hard to find rocks at free world help please

From: thecrimson
How to make it go Member worlds only because its empty there, its going free worlds;/ and hard to find rocks at free world help please

smart_members := false; (line 1304)
change to true

you will also have to edit the Switchworld1 function
(eg. if (I > 130) then I := 1; to 2)

you can easily understand these by just looking up on some beginner tutorials (which wont even take >1hr)

From: riwu
smart_members := false; (line 1304)
change to true

you will also have to edit the Switchworld1 function
(eg. if (I > 130) then I := 1; to 2)

you can easily understand these by just looking up on some beginner tutorials (which wont even take >1hr)

i did what you said but it still goes to a f2p world

some functions i will make it only SRL members …

updated to version 1.4 , enjoy and please giv an accoount :)

don't call me a noob, but how is the script supposed to know what my login and password is when switching worlds? and when im at the rocks, i enable the script, but the red dot just starts moves around in random positions, not mining the rocks or anything.

I would like to help you test this script. I have 2 85 miners F2P and 1 P2P

I'll have an account with 85 mining soon(ish). It is at 80 mining now, and I am botting the levels so it should take 15 days max to get 85.

But if you get help before that, then of course there is no need to wait for my account.

From: NotReligious
I'll have an account with 85 mining soon(ish). It is at 80 mining now, and I am botting the levels so it should take 15 days max to get 85.

But if you get help before that, then of course there is no need to wait for my account.

15 days? to get 80-85 mining? how much are you botting 2 hours? o.O

From: Bwuk
15 days? to get 80-85 mining? how much are you botting 2 hours? o.O

Around 12 hours per day coal at resource dungeon. <.<
And yes it is that slow.

post all your current problems, take screen shots and give me the debug text

i ll give this a try, i have a good mining account! :D

for anyone wondering how to change to members only rune mining…

(line 1319….) if (I > 130) then
I := 2;
Wait(10);
Writeln('Logging to lobby.')
ExitToLobby
OpenWorldScreen;
WorldNum := RandomWorld(true,false) ;
if (WorldNum = 106) then
…(line 1327) WorldNum := RandomWorld(true,false) ;

I hope this helps anyone interested.

From: trials6112
is this still working?

**Woot** 250posts

Congrats on 250 posts, way to post the exact same thing as the person right before you. :duh:

it gets stuck at lvl 1 wild, after the ditch and just gives the message 'we are lost'

does this script have 0 bugs ?
and just wondering how many times have you guys been pked
im considering getting 85 mining but not sure if its worth it

where can we look up how to change it our selves

Yeah this script is having issues i it cant find wildy when starting at bank and when starting at wildy mineing area it mines 1 ore than it stops and goes crazzy ??? any one know why its acting up lol

it keeps saying this

I Am Legends Wildy Runite Miner
You have mined : 0
You have jumped :0

Post your progress reports and ill add you to my exclusive members list
This means that you get try out my scripts first :)
0
end of mining loop
we are lost
contains 0 ores
Screenshot of: Found Dead 2 Hours, 1 Minutes and 2 Seconds
found pickaxe in inventory
not in wild
found ditch
looking for ditch

same here

i have an acc u can borrow 98 mining pm me if interested

i have an acc 99 mine. If your still looking for one. pm

This looks like a promising script, but can anyone confirm the current function? I see users saying they're having trouble..

Thanks.

Thank you so much for this! I look forward to your updates!!!

hi, having a problem when i click run this error message pops up what should i do

error message:

[Error] (283:3): Unknown identifier 'SolveTeleportRandoms' at line 282
Compiling failed.

Beautiful bot, although the anti-ban makes it look like a kid with ADHD is playing haha.

pm me if you need any help got a 85mining account

From: jackhill6
hi, having a problem when i click run this error message pops up what should i do

error message:

[Error] (283:3): Unknown identifier 'SolveTeleportRandoms' at line 282
Compiling failed.

pretty sure this is an anti leech trying to figure it out too bit of a noob lol

haha figured it out was really easy go watch some srl tutorials

i think i worked out the anti leech(if it was one)
but its not working doesn't find ditch (maybe i screwed this when trying to fix the antileech) can someone confirm whether its not working or i screwed up the anti leech fix just assumed i got it too work cause smart started up

[Error] (283:3): Unknown identifier 'SolveTeleportRandoms' at line 282
Compiling failed.

What should I do? Please PM or send to my email; [email]jont3_lawl_uh@hotmail.com[/email], or skype jonte11111

From: x64
[Error] (283:3): Unknown identifier 'SolveTeleportRandoms' at line 282
Compiling failed.

What should I do? Please PM or send to my email; [email]jont3_lawl_uh@hotmail.com[/email], or skype jonte11111

First of all; this script doenst get updated anymore. And why the fuck would he send it to you only? Great teamplayer dude

From: wtfje
First of all; this script doenst get updated anymore. And why the fuck would he send it to you only? Great teamplayer dude

Now calm down, and first of all I asked if someone could send a FIX for it, and second how would I know it doesnt get updated? don't rage.

[Error] C:\Simba\Includes\sps/sps.simba(300:3): Unknown identifier 'SPS_FilterMinimap' at line 299
Compiling failed.

May I use your world hopping? I will give proper credits.

From: KeepBotting
May I use your world hopping? I will give proper credits.

Im sure you can. The owner of the script is not active on the forums anymore so just use it and give full credits to him as you will never get an answer unless he comes back really soon.

@Jamchiz…your error means you need to take a look at the SPS link on the first page and do whats necessary.

@x64…if it is anti leech, no one will send you the fix as it is not allowed. Read some tuts and they will teach you what you have to do to fix it.

Offtopic: SRL Jr. Member FTW :)

I have a couple questions for SRL members.
- What's the benefit of applying for SRL membership?
- Do you have to have your own script made from scratch?
- I fixed up this runite miner script for mining guild dungeon (working really well after weeks of testing). I changed things up quite a bit and added some new features. Is that good enough or does it really have to be your own work from the first to the last line?

From: sickle
I have a couple questions for SRL members.
- What's the benefit of applying for SRL membership?
- Do you have to have your own script made from scratch?
- I fixed up this runite miner script for mining guild dungeon (working really well after weeks of testing). I changed things up quite a bit and added some new features. Is that good enough or does it really have to be your own work from the first to the last line?

srl members get access to even more great scripts

but you need to have made a VERY good script to be able to get accepted

From: kingsleyeng
srl members get access to even more great scripts

but you need to have made a VERY good script to be able to get accepted

Oh wow so you are telling me that they have better scripts only shown to the SRL members?? I thought that there already are many great scripts in public at villavu so I am surprised!

If you still looking for an account
Pm me please i can help you in this one