SRL Archive - RS3 Outdated / Broken Scripts

~Camo

reserved for 3 top proggy's!
1) Mrbanana:
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ AnyTreePowerCutter! By Camo Developer ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Loads Done: 49! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Logs Dropped: 1323! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Total Xp Gained: 89302.5! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Estimated Xp/Hr: 22063! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Time Running: 4 Hours, 2 Minutes and 51 Seconds! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ Players Report ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤ Player 0:****: Did 49 Loads, Dropped 1323 Logs and Gained 1 Woodcutting Levels!
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ NO PROGGY'S NO UPDATES! ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤


2)


3)

Code looks good!
I might have some time to test it out later.
Good job :)

You don't have much of a wait procedure, no matter what it will break on the first loop o.o.

    Repeat
      Wait(100+Random(300));
      AntiRandoms;
      AntiBan;
      Exit; //This breaks the loop!
    Until (not IsUpText('ree') or (Invfull) or (TimeFromMark(MarkedTime) >=400000));

I also suggest adding an if..then to check if your logged in or not.

   Repeat
      Wait(100+Random(300));
      AntiRandoms;
      AntiBan;
      If Not LoggedIn Then
      Exit;
    Until (not IsUpText('ree') or (Invfull) or (TimeFromMark(MarkedTime) >=400000));

I'd also suggest making a single procedure for tree finding. Try something like this to set the colors/uptexts:

Procedure SetTreeVariables;
Begin
If (not LoggedIn) then Exit;
Case lowercase(DeclareTree) Of
  'normal' : Begin
               Color := TreeColor;
               UpTexts := ['Tree', 'Tre', 'ree'];
             End;
  'oak' : Begin
               Color := OakColor;
               UpTexts := ['Oak', 'Oa', 'ak'];
             End;
  'willow' : Begin
               Color := WillowColor;
               UpTexts := ['illow', 'Willo', 'Willow'];
             End;
  'maple' : Begin
               Color := MapleColor;
               UpTexts := ['aple', 'Maple', 'Mapl'];
             End;
  'yew' : Begin
               Color := YewColor;
               UpTexts := ['Yew', 'ew', 'Ye'];
             End;
  'magic' : Begin
               Color :=MagicColor;
               UpTexts := ['agic', 'gic', 'Magic', 'Magi'];
             End;
End
End;

Then do this for the tree finding:

Procedure CutTree;
Var
  MarkedTime : Integer;
Begin
  If (not LoggedIn) then Exit;
  MarkTime(MarkedTime);
  If FindObjTPA(x, y, Color, 20, 2, 15, 25, 10, [UpTexts]) then
  begin
    GetMousePos(x,y);
    MMouse(x,y,3,3);
    if IsUpText(Uptexts[random(3)]) then
    Wait(100+Random(200));
    Mouse(x,y,4,4,False);
    ChooseOption('hop');
    AntiRandoms;
    Repeat
      Wait(100+Random(300));
      AntiRandoms;
      AntiBan;
      Exit;
    Until (not IsUpText('ree') or (Invfull) or (TimeFromMark(MarkedTime) >=400000));
    if (TimeFromMark(MarkedTime) >=400000)then
    begin
      WriteLn('Couldn''t find tree :(');
      Logout;
      TerminateScript;
    end;
    if Invfull then
      DropAllExcept([axe]);
      AntiRandoms;
      Inc(Drops);
      Inc(Loads);
      Proggy;
  end;
End;

I'm pretty sure that'll work. It looks good, just needs a few improvements.

Also, your declaring Axe as an integer, but your not giving them a chance to declare, that I can see. I've changed it to a constant in my version.

Here's the full script, take a look over and see what I've changed :).

{///////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
I have to say thanks to Sand Storm for helping me with cases. He hopped on MSN
and taught me the quick way. :D This is my first released script, but I'm almost
done with another one. PLEASE DO NOT LEECH! NO PROGGY'S NO UPDATES! This will
eventually be made into a banker, but I thought why not let other people use it
first. :D ;) Thank you to everybody who took their time and wrote the tutorials
so that way a noob like me could make a script.

-=Directions=-
*Fill out the DeclarePlayers
*Declare what tree you are going to be powercutting
*Set how many loads
*Fill in SRL Stats(If you have it)
*Hit Run and sit back and enjoy!

-=Features=-
*Decent EntFinder
*AntiBan
*AntiRandoms
*Failsafes

Well I hope you enjoy the script!!!

~Camo
////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////}

Program AnyTreePowerCutter;
{.include srl/srl.scar}
{.include srl/srl/skill/woodcutting.scar}
{.include srl/srl/misc/users.scar}

Const
  DeclareTree = 'Normal';
  LoadsWanted = 5;
  Axe = 1 //Which inventory slot is your axe in - VERY IMPORTANT!
  
  Version = 'V0.1'; // Do not touch!

  SRLStatsID = '';
  SRLStatsPW = '';
  
  TreeColor   = 4750964;
  Oakcolor    = 6203804;
  WillowColor = 7842965;
  MapleColor  = 2502776;
  YewColor    = 1065268;
  MagicColor  = 11919070;
  
Var
  x, y, i, Color: Integer;
  LoadsDone, Drops, Loads, Gained, Level: Integer;
  Uptexts : Array Of String;
  
Procedure DeclarePlayers;
Begin
  HowManyPlayers := 1;
  NumberOfPlayers(HowManyPlayers);
  CurrentPlayer := 0;

  Players[0].Name := ''; // your runescape account
  Players[0].Pass := ''; // your runescape password
  Players[0].Nick := ''; // 3-4 letters of your runscape username
  Players[0].Active := True; //In the script or not
  
 {Players[1].Name := ''; // your runescape account
  Players[1].Pass := ''; // your runescape password
  Players[1].Nick := ''; // 3-4 letters of your runscape username
  Players[1].Active := True; //In the script or not

  Players[2].Name := ''; // your runescape account
  Players[2].Pass := ''; // your runescape password
  Players[2].Nick := ''; // 3-4 letters of your runscape username
  Players[2].Active := True; //In the script or not

  Players[3].Name := ''; // your runescape account
  Players[3].Pass := ''; // your runescape password
  Players[3].Nick := ''; // 3-4 letters of your runscape username
  Players[3].Active := True; //In the script or not

  Players[4].Name := ''; // your runescape account
  Players[4].Pass := ''; // your runescape password
  Players[4].Nick := ''; // 3-4 letters of your runscape username
  Players[4].Active := True; //In the script or not}
  
  Writeln( IntToStr ( HowManyPlayers ) + ' Players' );
  SetPlayerNameTPAs;
End;
  
Procedure FleeFromFight;
Begin
  RunAway('N', True, 1, 10000 + Random(2000));
End;

Function CheckForFight: Boolean;
Begin
  if CheckHpFirst then
  begin
    Wait(500 + Random(100));
    if (HpPercent < 100) then
      FleeFromFight;
  end;
End;

Procedure EntFind;
Begin
  if Findent(x, y, true) then
  begin
    WriteLn('Found Ent! Waiting for it to go away!');
    RunAway('N', false, 1, 10000 + random(6000));
  end;
End;

Procedure AntiRandoms;
Begin
  if not(LoggedIn) then Exit;
  LampSkill := 'Woodcutting';
  EntFind;
  FindTalk;
  FindMod;
  if FindMod then Logout;
  FindNormalRandoms;
  if (CheckForFight = True) then
  begin
    FleeFromFight;
  end;
End;

Procedure AntiBan;
Begin
    case random(50) of
     1 : MMouse(0, 0, 700, 500);
     2 : Hoverskill('Woodcutting', false);
     4 : BoredHuman;
     5 : RandomMovement;
     6 : GameTab(1);
     7 : PickupMouse;
    end;
End;
  
{*******************************************************************************
Procedure DropAllExcept(A : Array of Integer);
By: Sand Storm
Description: Drops everything except the user defined inventory spaces.
*******************************************************************************}

Procedure DropAllExcept(A : Array of Integer);
Begin
For I:=2 To 28 Do
    if not(InIntArray(a, i)) then
      DropItem(i);
End;

Procedure Proggy; Forward;

Procedure CutTree;
Var
  MarkedTime : Integer;
Begin
  If (not LoggedIn) then Exit;
  MarkTime(MarkedTime);
  If FindObjTPA(x, y, Color, 20, 2, 15, 25, 10, [UpTexts]) then
  begin
    GetMousePos(x,y);
    MMouse(x,y,3,3);
    if IsUpText(Uptexts[random(3)]) then
    Wait(100+Random(200));
    Mouse(x,y,4,4,False);
    ChooseOption('hop');
    AntiRandoms;
    Repeat
      Wait(100+Random(300));
      AntiRandoms;
      AntiBan;
      If Not LoggedIn Then
      Exit;
    Until (not IsUpText('ree') or (Invfull) or (TimeFromMark(MarkedTime) >=400000));
    if (TimeFromMark(MarkedTime) >=400000)then
    begin
      WriteLn('Couldn''t find tree :(');
      Logout;
      TerminateScript;
    end;
    if Invfull then
      DropAllExcept([axe]);
      AntiRandoms;
      Inc(Drops);
      Inc(Loads);
      Proggy;
  end;
End;

////////////////////Case help by Sand Storm, but made by me/////////////////////
Procedure TreeToCut;
Begin
If (not LoggedIn) then Exit;
Case lowercase(DeclareTree) Of
  'normal' : WriteLn('Normal');
  'oak'    : WriteLn('Oak');
  'willow' : WriteLn('Willow');
  'maple'  : WriteLn('Maple');
  'yew'    : WriteLn('Yew');
  'magic'  : WriteLn('Magic');
  '' : WriteLn('Please enter the name of a tree!');
End
End;

Procedure SetTreeVariables;
Begin
If (not LoggedIn) then Exit;
Case lowercase(DeclareTree) Of
  'normal' : Begin
               Color := TreeColor;
               UpTexts := ['Tree', 'Tre', 'ree'];
             End;
  'oak' : Begin
               Color := OakColor;
               UpTexts := ['Oak', 'Oa', 'ak'];
             End;
  'willow' : Begin
               Color := WillowColor;
               UpTexts := ['illow', 'Willo', 'Willow'];
             End;
  'maple' : Begin
               Color := MapleColor;
               UpTexts := ['aple', 'Maple', 'Mapl'];
             End;
  'yew' : Begin
               Color := YewColor;
               UpTexts := ['Yew', 'ew', 'Ye'];
             End;
  'magic' : Begin
               Color :=MagicColor;
               UpTexts := ['agic', 'gic', 'Magic', 'Magi'];
             End;
End
End;

Procedure GetWcLevel;
Begin
  GetSkillLevel('Woodcutting');
  Level := (GetSkillLevel('Woodcutting'));
End;

///////////////////FindGainedLevel By griff721//////////////////////////////////
function FindGainedLevel: boolean;
begin
  if (not LoggedIn) then Exit;
  if ClickContinue(False, False) then
  begin
    if FindNPCChatText('lations', Nothing) then
    begin
      writeln('We gained a Woodcutting!');
      Inc(Gained);
      ClickContinue(True, True);
      Result := True;
      Exit;
    end;
  end;
end;

Procedure Proggy;
Begin
  ClearDebug;
  Writeln('/////////////////////////////////////////////////////////////');
  Writeln('////////////// AnyTreePowerCutter by Camo Kyle //////////////');
  Writeln('/////////////////////////////////////////////////////////////');
  Writeln('///// Time Running : ' +TimeRunning +'///////////////////////');
  Writeln('///// Dropped '+ IntToStr(Drops) + ' loads///////////////////');
  Writeln('///// Gained '+ IntToStr(Gained) + ' Woodcutting levels//////');
  Writeln('/////////////////////////////////////////////////////////////');
  WriteLn('/////////Don''t forget to Rep++ if you like ;) //////////////');
  Writeln('////////////////NO PROGGY''S NO UPDATES!/////////////////////');
End;

Procedure Intro;
Begin
  WriteLn('     **     ********** *******');
  Wait(200);
  WriteLn('    ****   /////**/// /**////**');
  Wait(200);
  WriteLn('   **//**      /**    /**   /**  ***** ');
  Wait(200);
  WriteLn('  **  //**     /**    /*******  **///**');
  Wait(200);
  WriteLn(' **********    /**    /**////  /**  //');
  Wait(200);
  WriteLn('/**//////**    /**    /**      /**   **');
  Wait(200);
  WriteLn('/**     /**    /**    /**      //*****');
  Wait(200);
  WriteLn('//      //     //     //        ///// ');
  Wait(200);
  WriteLn('                        By Camo Kyle ');
End;
 
Begin
  LoadsDone := 0;
  SetupSRL;
  ClearDebug;
  Intro;
  Wait(2000);
  ClearDebug;
  SRLID := SRLStatsID;
  SRLPassword := SRLStatsPW;
  if (SRLID = '') or (SRLPassword = '') then
  begin
    SRLId := '6394';
    SRLPassword := 'GwepfLrGMa';
  end;
  Wait(1000);
  SetupWoodcutting;
  ActivateClient;
  DeclarePlayers;
  LoginPlayer;
  MakeCompass('N');
  SetAngle(True);
  Wait(1000);
  SetRun(True);
  GetWcLevel;
  TreeToCut;
  SetTreeVariables;
  Repeat
    Repeat
      Disguise('Loads done ' + IntToStr(Loads));
      CutTree;
      Inc(LoadsDone);
      Proggy;
    Until (LoadsDone = LoadsWanted) or (not LoggedIn);
    Logout;
    NextPlayer(Players[CurrentPlayer].Active);
    Proggy;
    LoginPlayer;
  Until False;
  Proggy;
End.

Looks nice :D
Reserved for proggy :P


EDIT: Got stuck when trying to log in, clicked the Graphics Options, then Log in where it failed by just trying to find color where its written Please Log In.
After fixed that ill run it and post proggy :D

EDIT: WTF! I tryed another willow power chopper to and the same happened!?
How to fix this?

From: n c d s
Code looks good!
I might have some time to test it out later.
Good job :)

Thanks, I worked on it straight for like 10 hours lol

From: Sand Storm
You don't have much of a wait procedure, no matter what it will break on the first loop o.o.

I also suggest adding an if..then to check if your logged in or not.

I'd also suggest making a single procedure for tree finding. Try something like this to set the colors/uptexts:

Then do this for the tree finding:

I'm pretty sure that'll work. It looks good, just needs a few improvements.

Also, your declaring Axe as an integer, but your not giving them a chance to declare, that I can see. I've changed it to a constant in my version.

Here's the full script, take a look over and see what I've changed :).

Thanks bro! That looks alot cleaner than mine, and it flows alot better. You are like the case master lol. I do have a question on something tho. On this part of the CutTree it is set to wait until there is no more UpText. But it is set to tree

Until (not IsUpText('ree') or (Invfull)

so would changing it to this fix the problem?

Until (not IsUpText(UpTexts) or (Invfull)

I just gave you some rep and I would give you some more if I could :( You helped so much! :D I tried my best lol.

From: Death-Magnetic
Looks nice :D
Reserved for proggy :P


EDIT: Got stuck when trying to log in, clicked the Graphics Options, then Log in where it failed by just trying to find color where its written Please Log In.
After fixed that ill run it and post proggy :D

EDIT: WTF! I tryed another willow power chopper to and the same happened!?
How to fix this?

Hmm I don't know…try the version I just put up.

VERSION 0.2 OUT NOW! BETTER CODE THANKS TO SAND STORM!

~Camo

I'll try it now ;)

From: Death-Magnetic
I'll try it now ;)

Ok thanks, I just fixed the Maple and Magic tree colors so if you want those re-download, but it isn't a big deal.

~Camo

From: Camo Kyle
Ok thanks, I just fixed the Maple and Magic tree colors so if you want those re-download, but it isn't a big deal.

~Camo

Sweet.
I just tryed to run again, still got same problem :confused: .
But i don't think it's your script ;) Mabye one of my settings, IDK

From: Death-Magnetic
Sweet.
I just tryed to run again, still got same problem :confused: .
But i don't think it's your script ;) Mabye one of my settings, IDK

What is it doing exactly? Not logging in your player?

~Camo

From: Camo Kyle
What is it doing exactly? Not logging in your player?

~Camo

Never mind Camo, it's the new update on Runescape that is doing this.
Many other ppls got same problem ;P

Lol alright. I saw that so I went ahead and updated. Well now you can test ;)

~Camo

From: Camo Kyle
Lol alright. I saw that so I went ahead and updated. Well now you can test ;)

~Camo

You updated the version 0.2? Or do i have to add the thing in script myself? :P ;)

Just re-download :)

~Camo

… who would powercut magics lol… nice script camo! i might try… i don't know yet cuz i am still training my wc army…

From: mormonman
… who would powercut magics lol… nice script camo! i might try… i don't know yet cuz i am still training my wc army…

Lol, well I went ahead and added them because later I'm going to make it a banking script. Thanks, you better try it. This should help alot :D Lol but you don't have to.

~Camo

From: Camo Kyle
Lol, well I went ahead and added them because later I'm going to make it a banking script. Thanks, you better try it. This should help alot :D Lol but you don't have to.

~Camo

Sure you added the login things?
If you did, then nice.
I'll try it in 5 mins ;)

From: Death-Magnetic
Sure you added the login things?
If you did, then nice.
I'll try it in 5 mins ;)

Oh, I mean I updated mine. I don't know how to do that, I'm a noob :p

~Camo

From: Camo Kyle
Oh, I mean I updated mine. I don't know how to do that, I'm a noob :p

~Camo

Lol, np, but search ''login'' and ull find the thing i think :D

[Runtime Error] : Exception: Type Mismatch in line 164 in script C:\Users\Computer Username\AppData\Local\Temp\AnyTreePowerCutterV0.2-2.scar


??


EDIT: Sorry for double post

Can you post that line? I'm doing changes so my lines are off -.-

~Camo

From: Camo Kyle
Can you post that line? I'm doing changes so my lines are off -.-

~Camo

Line? Its line 164 the problem is :P

Or did you mean this?

This is line 164: If FindObjTPA(x, y, Color, 20, 2, 15, 25, 10, [UpTexts]) then

Could you post it in here?….

~Camo

From: Camo Kyle
Could you post it in here?….

~Camo

I EDITED last post :)

Instead of this:

If FindObjTPA(x, y, Color, 20, 2, 15, 25, 10, [UpTexts]) then

Try this:

If FindObjTPA(x, y, Color, 20, 2, 15, 25, 10, UpTexts) then

Thanks, I just did that. I'm working on something else atm. Now it's time for work -.-

Oh it works and I added it to the main page. Changed some code around and fixed that problem.

~Camo

Ok, thx both :D

Thanks so much! It's just my skiller but Thanks! You can delete your second post, I fixed it. Is it working for you?

~Camo

From: Camo Kyle
Thanks so much! It's just my skiller but Thanks! You can delete your second post, I fixed it. Is it working for you?

~Camo

No problem ;)
And it works great!
But it register a log as one full load. Change that.

And heres a proggy :D

/////////////////////////////////////////////////////////////
////////////// AnyTreePowerCutter by Camo Kyle //////////////
/////////////////////////////////////////////////////////////
///// Time Running : 5 Minutes and 51 Seconds///////////////////////
///// Dropped 45 loads///////////////////
///// Gained 0 Woodcutting levels//////
/////////////////////////////////////////////////////////////
/////////Don't forget to Rep++ if you like ;) //////////////
////////////////NO PROGGY'S NO UPDATES!/////////////////////


Not 45 loads, like i sayd it register loads as logs so that is 45 logs :P

Ok, I will when I get home from work. V.3 coming out soon!

~Camo

Another proggy :D

/////////////////////////////////////////////////////////////
////////////// AnyTreePowerCutter by Camo Kyle //////////////
/////////////////////////////////////////////////////////////
///// Time Running : 24 Minutes and 7 Seconds///////////////////////
///// Dropped 174 loads///////////////////
///// Gained 0 Woodcutting levels//////
/////////////////////////////////////////////////////////////
/////////Don't forget to Rep++ if you like ;) //////////////
////////////////NO PROGGY'S NO UPDATES!/////////////////////

And remember 174 logs not loads :D


EDIT: Yay, thanks for posting my proggy :D

VERSION 0.3 OUT NOW!! TRY IT OUT! :D

You're welcome Death.

~Camo

From: Camo Kyle
VERSION 0.3 OUT NOW!! TRY IT OUT! :D

You're welcome Death.

~Camo

Sweet :D :D I'll try it right away :D :p


EDIT: Hmmm, it doesnt click on tree but on ground, mabye wrong colors on v.3? Worked on v.2 :S

What tree you using?

~Camo

From: Camo Kyle
What tree you using?

~Camo

Lol, i MAY have chosen wrong tree, but don't think so :P I'll check and tell you what happened ;)


EDIT: And by the way, where is the best place to powercut willows in non-member? :S Untill now i've been in Draynor, lol, it's like 10+ ppl there ALL time, lol xD


EDIT: Nope, did choose right tree, it still just search at ground near tree for some color i think :S

Ok, I'll check on that. Sorry. Try the pond by Lumbridge, that's where I go.

~Camo

From: Camo Kyle
Ok, I'll check on that. Sorry. Try the pond by Lumbridge, that's where I go.

~Camo

Found a great spot with almost no people :D
It's in Rimmington :D

It was kida strange that the tree color thing didn't work :S


EDIT: And by the way, tell me when fixed the tree color thing :)

Yeah, that place is good too.

V.4 out now!

~Camo

Nice v.4! Im going to try it out now :D

Lol, im like the guy that test/run the script and tells how it goes and all the things you need to fix xD
So far it's actually not being many thing to fix, just some few, good job Camo ;)

From: Death-Magnetic
Nice v.4! Im going to try it out now :D

Lol, im like the guy that test/run the script and tells how it goes and all the things you need to fix xD
So far it's actually not being many thing to fix, just some few, good job Camo ;)

Thanks, I'm trying my best. I used better colors for trees so hope that helps. See if you can beat your previous proggy ;)

~Camo

From: Camo Kyle
Thanks, I'm trying my best. I used better colors for trees so hope that helps. See if you can beat your previous proggy ;)

~Camo

Your actually doing great ;)

And yes, i'll try beat it :D Shouldn't be that hard, lol.
But have you fixed the count thing? ;P if not, its not a big issue :D

EDIT: Tested it, and count thing is fixed, but now when you got axe in inv. it wield it and it doesnt drop log in 1. slot.
And make it run a direction if attack, got attacked by a swarm. LOL!
Still a great script ;)

From: Death-Magnetic
Your actually doing great ;)

And yes, i'll try beat it :D Shouldn't be that hard, lol.
But have you fixed the count thing? ;P if not, its not a big issue :D

EDIT: Tested it, and count thing is fixed, but now when you got axe in inv. it wield it and it doesnt drop log in 1. slot.
And make it run a direction if attack, got attacked by a swarm. LOL!
Still a great script ;)

Ok. It should be able to tell if you're in a fight, I don't know what's up with that. Yeah I know about the log, so I have it to show only 27 inv slots dropped not 28 for the proggy.

~Camo

Wanna have a comp between me and u. Who can get a better proggy happening?

Looks good but with your drop procedure you could change it to something with a DTM so you dont have to check for an axe. A good DTM for logs and drop procedure here.. By me of course. I used this same procedure in my Power Cutter. Havent released it yet. This might not work for your proggy.

Var
log : integer;

Procedure LoadDTM;
begin
  Log := DTMFromString('78DA63CC61626078CA8002527DF5185280342' +
       '310FF0702C662A09A9B0C6880118904D26540350F09A8A902AA79' +
       '45404D0150CD3B026A6231DD8CA12603A8E60E0135E940351FF1A' +
       'B0100EE000FFC');
end;

Procedure DropLogs; //By Mr_Bum
begin
  LoadDTM;
  If not Loggedin then exit;
  If InvFull then
  repeat
  begin
    if(FindDTM(Log,x,y,MIX1,MIY1,MIX2,MIY2))then
    begin
      MMouse(x,y,1,1);
      If(IsUpText('og'))then
      begin
        Mouse(x,y,1,1,false);
        ChooseOption('rop');
        Inc(Drops);
      end;
    end;
  end;
  Wait(500+random(100));
  until (not(FindDTM(Log,x,y,MIX1,MIY1,MIX2,MIY2)));
  FreeDTM(Log);
  Inc(Loads);
  Proggy;
end;
  
    

Sure, but I just fixed the drop procedure. It's in my V0.5 :D I bet I can win lol.

V0.5 OUT NOW!!

How am I doing so far? Is it a good script?

~Camo

From: Camo Kyle
Sure, but I just fixed the drop procedure. It's in my V0.5 :D I bet I can win lol.

V0.5 OUT NOW!!

How am I doing so far? Is it a good script?

~Camo

You are doing great, Camo! :D



EDIT: WOW! Im running it now and v.5 is great improvement! :) Good job Camo

EDIT: You should make the antiban respond at your username, when someone ask for wc lvl, and sometimes that it just write something, for example ''Me love woodcutting'' ''Cutting is fun'' Bah, im bored'' something like that.

Death, check out my signature. It's a work in progress ^.^.

Proggy:

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 48 Minutes and 8 Seconds
||===== Did 35 loads
||===== Gained 0 Woodcutting levels
||===== Dropped 945 Logs
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

:D


EDIT: Yeah Sand, i saw. Looks nice :D Keep it up man :)

Nice Death! Thanks so much for using my script! Your new proggy is on the front page :D I would of had a great proggy but my lil bro got on my comp and closed it out wtf! -.-

~Camo

wow good job :)

i think it beated my first powerchopper, since pcer is almost donne :P ill get back to my powerchopper and get some competition out here lol.

gj dude. btw you can make a easy dropping proc, isnt really hard.
(get a example or use mine *credit me for sure* it use's DTM and i got another 1 there both in my script).

keep it up once again.

From: Camo Kyle
Nice Death! Thanks so much for using my script! Your new proggy is on the front page :D I would of had a great proggy but my lil bro got on my comp and closed it out wtf! -.-

~Camo

Lol, it's actually yourself you can thank, becouse i just hit run. LMAO xD
Anyway, it actually runned smoothly 2 hours like the proggy said, almost 3, great job Camo :D

Thanks! But Myles just fixed my drop procedure for me. It's using the same thing but it works alot better.

Redownload for V0.6!

Thanks again to all who have used/commented on my script.

~Camo

Been using this for a few hours or so. It's nice. Just a suggestion tho:
Why not add the ability to harvest different types of wood on each account? E.g Oak on one, Normal on another

From: Boblet
Been using this for a few hours or so. It's nice. Just a suggestion tho:
Why not add the ability to harvest different types of wood on each account? E.g Oak on one, Normal on another

Thanks :D Post proggy plawx? Lol. That would be a good idea. I could just change it up so that way it uses the declare players for each type of tree. Good thinking! I'm working on a failsafe that if it can't find any trees it clicks on where you started from. But I will try your idea. ;) Thanks for feedback.

~Camo

Gonna look over it. See if anything needs improvements. Looks good so far though ^.^.

Thanks. But before you do…

V0.7 out now!!!!!!!! Check the first page to see everything that I added!!

Please post proggy's and or bugs!

~Camo

I try run it but it doesnt do a sh*t, after it have loaded smart?
wtf? :P

It worked when i didnt use smart :S But, Camo, can u please check what u got in the CAutoResponder folder? Its under Plugins, Srl, Srl, and all that ;P And at last under core

EDIT: Fixed it ;)

~D-M

I start it up, it checks out my graphics/level, then ends?

1 Players
Attack level is 40.
Woodcutting level is 57, keep it up :)
Willow
Here we go!
Successfully executed

From: kryad3
I start it up, it checks out my graphics/level, then ends?

1 Players
Attack level is 40.
Woodcutting level is 57, keep it up :)
Willow
Here we go!
Successfully executed

When this script runs it will automaticly update the proggy after each load or something, so you can just copy and paste the proggy and post it here.
Even if you stop script in middle you will get a proggy.

Have a nice day!

~D-M

From: Death-Magnetic
When this script runs it will automaticly update the proggy after each load or something, so you can just copy and paste the proggy and post it here.
Even if you stop script in middle you will get a proggy.

Have a nice day!

~D-M

Well it didn't exactly do one load, and I didn't stop in the middle of the script. When I run the script, it starts up fine, changing graphics settings and checking levels, but then it just stops? No proggy is posted and it just says Successfully Executed at the end. Also, I decided to try it out from the login screen, just to see if that changed anything. When I started it up on login screen, It checked graphics, then went to log in, and then just sat there, the script didn't end and my mouse was stuck in one spot. Note that I tried both from the login screen, and already logged in.

From: kryad3
I start it up, it checks out my graphics/level, then ends?

1 Players
Attack level is 40.
Woodcutting level is 57, keep it up :)
Willow
Here we go!
Successfully executed

Well the here we go is part of Sand Storm's Auto-responder. I notice it didn't find an axe. Make sure you set this part up correctly.

Const
  Axe         = 0; //Which your axe is in. 0 for none! - VERY IMPORTANT!
//  SmartWorld  = 11;//Change to world you want to auto on
  AxeInInv    = False; //Is axe in the inventory?
  StartPersonality = 'bored';//Change between bored,polite,angry,laid back.
  TimeBetweenResponds = 10000;

@Death. You don't need to use smart, it's there for the people who want to use it.

V0.8 Out Now!!!

This should work alot better. Anymore bugs that need to be fixed?

~Camo

From: Camo Kyle

@Death. You don't need to use smart, it's there for the people who want to use it.

~Camo

I know, but i actually tried both ;) But like i wrote i fixed it :p

EDIT: Got an error: Line 86: [Error] (123:187): Invalid number of parameters in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Misc/Smart.Scar

From: Death-Magnetic
I know, but i actually tried both ;) But like i wrote i fixed it :p

EDIT: Got an error: Line 86: [Error] (123:187): Invalid number of parameters in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Misc/Smart.Scar

Make sure this:

Procedure DeclarePlayers;
Begin
  HowManyPlayers := 1;
  NumberOfPlayers(HowManyPlayers);
  CurrentPlayer := 0;

Is filled in correctly ;)

~Camo

nice script bro:spot:

V0.9 OUT NOW!!! GET IT WHILE YOU CAN!!!!

~Camo

From: Camo Kyle
V0.9 OUT NOW!!! GET IT WHILE YOU CAN!!!!

~Camo

Kewl! :D

I'm going to test it when i have fixed some of the errors i get when i try to run and i think the problem is SMART and Login.scar

Yay! This is my 100 post :p

~D-M


EDIT: I set the loads per player to 100 and it does 2 and log out. And when it's going to drop, it take the cursor at ground a few cm away from the tree and then to the log and then it drop, and this repeats until no logs left in inv.
And on the version before this it did this right but now it doesn't, it doesn't drop the 1. slot log.
Well i think that was it for now :D


~D-M

Nice script thank you

uhhhh


1 Players
Welcome to Runescape.
*************
Attack level is 56.
Woodcutting level is 81, keep it up :)
Willow. The best way for xp in RuneScape.
Here we go!
Successfully executed


EDIT: Nevermind! MY axe was just broken from another powercutter.

Hi. I was using this last night and it ran pretty good, except for one little thing. I set my loads to 4, I declared 3 of my players, set the HowManyPlayers := 3, then I ran the script. It logged in my first guy and did 4 loads really well. Then, it logged in my second player and did 9 loads for some reason, so I manually stopped it because it was going on the 10th load without logging out, so I just stopped it. Why would it do this?

Actually….
It still is randomly stopping after the first load.

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 6 Minutes and 35 Seconds
||===== Did 1 loads
||===== Gained 0 Woodcutting levels
||===== Dropped 0 Logs
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Attack level is 56.
Woodcutting level is 81, keep it up :)
Willow. The best way for xp in RuneScape.
Here we go!
Successfully executed

From: Da Der Der
Hi. I was using this last night and it ran pretty good, except for one little thing. I set my loads to 4, I declared 3 of my players, set the HowManyPlayers := 3, then I ran the script. It logged in my first guy and did 4 loads really well. Then, it logged in my second player and did 9 loads for some reason, so I manually stopped it because it was going on the 10th load without logging out, so I just stopped it. Why would it do this?

Hmm. Did you declare 4 loads in all of the players? Each player has it's own set of loads to do. If that's not the problem then I'll have to look into this. Thanks for using/posting errors :D

@Death. I'll see what needs to be fixed.

From: 006786
Actually….
It still is randomly stopping after the first load.

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 6 Minutes and 35 Seconds
||===== Did 1 loads
||===== Gained 0 Woodcutting levels
||===== Dropped 0 Logs
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Attack level is 56.
Woodcutting level is 81, keep it up :)
Willow. The best way for xp in RuneScape.
Here we go!
Successfully executed

Hmm I'm looking at the code right now, I think I know what I did wrong.

Before I update it to V1.0 I would like all bugs and suggestions! The ones that are above this post are fixed! Don't repeat those. Thank you.

~Camo

I DID notice something.
If there is an object other than a log in any inv. slot (except the first one), then it will stop after it is done dropping.

From: 006786
I DID notice something.
If there is an object other than a log in any inv. slot (except the first one), then it will stop after it is done dropping.

Ok, thanks. Going to work on that.

~Camo

Still no idea :\

Annoying, because it only does 1-4 loads at a time :\

2 Players
Attack level is 40.
Woodcutting level is 66, keep it up :)
Willow. The best way for xp in RuneScape.
==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 4 Minutes and 5 Seconds
||===== Did 1 loads
||===== Gained 0 Woodcutting levels
||===== Dropped 0 Logs
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
Attack level is 40.
Woodcutting level is 66, keep it up :)
Willow. The best way for xp in RuneScape.
Here we go!
Successfully executed

Randomly stops after one load?

Also, had one fight, it ran away but didn't return to the tree I was cutting, Instead of cutting willos's, it cut a regular log? And then it started looking around for willows, I had to move myself to the location then start it up again.

Players[0].Booleans[0] := True; //True for AxeInInv, False if it isn't

With this set as False, it still won't drop first log in inventory, If I set it to True, and am wielding the Axe, it won't move the axe to inventory slot 1 as it should. unless I am reading
"AxeInInv: Set to True and it will move axe from hand to inventory slot 1 if it can." wrong.

I'm working on all of these bugs atm ;) Will be posted soon

~Camo

If I get it to work, I'll post a proggy asap.

Procedure DropLogs;
Begin
  if AxeInInv then
    begin
      I:=2
    end else
      I:=1
    end
  For I:=I To 28 Do
    begin
    if ExistsItem(i) then
      begin
        MMouseItem(i);
        Wait(200 + random(100));
        If isuptext('og') or (isuptext('Log'))  then
        begin
          DropItem(i);
          AntiRandoms;
        end;
      end;
    end;
end;

Try something like that for the dropping :)

From: 006786

Procedure DropLogs;
Begin
  if AxeInInv then
    begin
      I:=2
    end else
      I:=1
    end
  For I:=I To 28 Do
    begin
    if ExistsItem(i) then
      begin
        MMouseItem(i);
        Wait(200 + random(100));
        If isuptext('og') or (isuptext('Log'))  then
        begin
          DropItem(i);
          AntiRandoms;
        end;
      end;
    end;
end;

Try something like that for the dropping :)

Lol Thanks but I have a better one than that. ;)

~Camo

I'm having trouble with this, can somebody help me?

Thanks in advance!

http://i33.tinypic.com/11v5v85.png

not bad. i think that this is pretty good

From: lol_monkyy
I'm having trouble with this, can somebody help me?

Thanks in advance!

http://i33.tinypic.com/11v5v85.png

Search the problem. Search for like World prefix or something, and you will find the thread that can help you.

~D-M

From: kakka
not bad. i think that this is pretty good

inspiring… :D! hey camo, can't wait until you add banking… then i might use!

Yeah, well before I update the last version before banking I want it to run flawlessly. So I'm doing extensive testing.

~Camo

From: Camo Kyle
Yeah, well before I update the last version before banking I want it to run flawlessly. So I'm doing extensive testing.

~Camo

Kewl :)
I set the amount of loads to 10 and it do 1, what happens? is it your script or something in my SCAR/SRL?


~D-M

Yeah, it's the script. I believe I have that working now. Wanna test it for me? I'll PM you.

~Camo

From: Camo Kyle
Yeah, it's the script. I believe I have that working now. Wanna test it for me? I'll PM you.

~Camo

Sure i will test for you :D


~D-M

I'll test too :D

If you post it i'll test it too :p Just got my VM running =D

I'm still testing out V1.0 and making sure it runs well. Haven't been able to test much because of class/work. Hopefully will be able to test good tonight. Sorry for the wait.

~Camo

Line 46: [Error] (46:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL\Core\Math.scar

What is this error?

Line 46: [Error] (46:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL\Core\Math.scar

??? anybody help

this is not working with me :( doesnt even start the script it says too Line 46: [Error] (46:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL\Core\Math.scar

Sirchris333, dont doublepost.
Don't spam down this thread, Camo Kyle is doing hes best.


~D-M

cant seem to get it to beable to do more than 1log with out logging out,no matter what i set it to you

Did you guys set your players?
I forgot once (oops), and it gave me that error.

Well I'm starting working on this again, I wanted to finish my Range Guilder since I got my account back. So hopefully I will have an update soon. Again, sorry for taking so long. (P.s. Check out my Range Guilder in my sig) ;)

~Camo

the smart thing wont log in, it just moves the mouse above username.

http://www.villavu.com/forum/showthread.php?t=38768?t=41671&highlight=login

Follow that tutorial, it'll fix it.

looks good, I'll check it out later

Yay! I still got the best proggy :p
Can't wait for the banker, PM me when it's finish and i'll post a nice proggy :p


~D-M

Hey i ran the script it just clicked my skillz and sayed there it didnt cut anything, what am i doing wrong? and will it bank the yews for me?

From: RWTF
Hey i ran the script it just clicked my skillz and sayed there it didnt cut anything, what am i doing wrong? and will it bank the yews for me?

For the first question, I have no idea.

For the second question, lets use a little logic, shall we?

POWER cutter. Power = As fast as possible. This script is designed to get xp; fast. So no. It won't.

But hes going to put in a banker right? well what the best banker(varrock palace) woodcutter then? this is an ecellent script.

sorry for the double post but i'm cutting willows,but it stops after 2 or so load…and i'm wondering whats up with that?

yeah, whenever i use this, ill fill out the declare players part, and press play. then at the botom of SCAR it says lin f6 contains and then a bunch of weird computer jibberish. any idea how to fix? aslo, it might be a problem on my end as ive never done this before. thx

From: spud 302
yeah, whenever i use this, ill fill out the declare players part, and press play. then at the botom of SCAR it says lin f6 contains and then a bunch of weird computer jibberish. any idea how to fix? aslo, it might be a problem on my end as ive never done this before. thx

hmmn, try copying the whole of what it says because just lin f6 contains. isnt much to work with also u might have set up the chars wrong

Ok guys sorry for all the problems. I have been so busy with work and school that I haven't been able to work on it lately.

From: RWTF
But hes going to put in a banker right? well what the best banker(varrock palace) woodcutter then? this is an ecellent script.

Yes, I am going to add a banker but it will only be for Draynor for right now since that will be the easiest to do. And thanks for the compliment :) Yes, I am aware it only does one or two loads, I think I have fixed that for right now.

From: spud 302
yeah, whenever i use this, ill fill out the declare players part, and press play. then at the botom of SCAR it says lin f6 contains and then a bunch of weird computer jibberish. any idea how to fix? aslo, it might be a problem on my end as ive never done this before. thx

As for your error, I have never heard of it before. Can you post it so I can see what you're doing wrong? Again, sorry for taking so long, it's just been crazy here lately.

~Camo

Oak's dont work as well.
im trying to update mine and oaks giving me probs.

I think that the first script that i will attempt to make will be a simple powerchopper.

Wanna say thank-you for this nicely done Script, Very well done alot of features to make you "undetectable" I loved the Power Chopping, And the easy to use Script.

Considering I am a noob and just got Scar Divi like 1hr ago, And was able to set this up with ease, sure show's you have a well done script.

I rate it 9/10 Only because the when dropping the log's does tend to take awhile thus making your account standing there, May look suspicious to other people who have Autoed before or know what's going on.

Either than that, It works flawlessly, Had done 2 loads to test it out :D

Thanks!!! :) Much n00b love from me.

Edit: I did give you rep, Much deserved.

this script is in my mind more than a 2 star i ran it for 16h with no problems thanks dude keep it up

It works for a while and then logs me out. D:

Worked well Kyle, chopped up some willows real fine. Was a bit slow at first, but got progressively faster.

From: Joe12387
It works for a while and then logs me out. D:

I'm working on that, just wait for the next update ;)

From: lazar wolf
this script is in my mind more than a 2 star i ran it for 16h with no problems thanks dude keep it up

From: ForumLocust
Worked well Kyle, chopped up some willows real fine. Was a bit slow at first, but got progressively faster.

If it really worked as good as you say, then post proggies please? I'm glad it works well still.

~Camo

hey how did you guys get it to run for more than 2 loads? it only dose 2 loads for me then clicks my states and stops…i'm i missing something here?

Nice script is there any chance of a banker, ill post a proggie later if you want

When he release banker, it will be in SRL Junior Member script section.
So get 10 posts and be on forum for a week and you will access them, but idk if Camo Kyle have released it or ever will.
But i think he's on it ;)


~D-M

Script works well

and he does most of the randoms so ty;)
==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 1 Hours, 15 Minutes and 36 Seconds
||===== Did 18 loads
||===== Gained 2 Woodcutting levels
||===== Dropped 0 Logs
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
Successfully executed
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 29 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Talks : 3 |
| Sandwiches : 1 |
| Capn Hands : 1 |
| Demons Solved : 1 |
| Ents Found : 2 |
| Foresters Missed : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

Line 39: [Error] (18400:1): Semicolon (';') expected in script how to fix ?

new to this…and honestly idk what im doing or what this means…

[Runtime Error] : Exception: in line 46 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/Math.scar

I Am Going To Get The Best Proggie Out As Soon As My Army Gets A Good Mining Level.

ok well mine just goes to the stats page and then the script is finished after it says here we go! wtf??

Best script ever :f: !!!!!!! and greeen ne0n wat i do is i start it when im already logged in :D

the it just messes with the graphics and says im level 10 then says here we go and stops

From: greeen ne0n
the it just messes with the graphics and says im level 10 then says here we go and stops

Um i have no clue then, im still a noob soz, maybe Camo Kyle will be back on
l8r

nice script

im cheackin if it works

thanks bro

hmmm…. i have afound a few bugs (non-smart).
1. it wont work if you are alrady logged in. it will check graphics, inv, stats, and than stops.
2. when dropping logs, it will lease the log in the first inv spot, and after every log droped, it will move the moue bqack tio the tree, and then drop the next log
3. wont do more than 1 load. after dropping all logs, it will check stats, inv, and back to stats and stop. i think this may be related to bug #1. perhaps having 2 accounts going, switching aftr evry load will work.

i'm choppin willows btw.
i'll give smart a go

Nice i will use this definatly!

FINALLY UPDATED!! V1.0 OUT NOW!!
Sorry about the wait, I had some free time to waste. Check the first page to see everything!

~Camo

I used ur new script and it did one load then i get this.

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 4 Minutes and 14 Seconds
||===== Player 0:rwtf: T
[Runtime Error] : Out Of Range in line 311 in script C:\Users\Clayton\Downloads\AnyTreePowerCutterV1.0.scar

Sorry, I see what I did wrong. Fixed! Please re-download

~Camo

Ecellent! but theres a problem with the anti-randoms i think…

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 26 Minutes and 45 Seconds
||===== Player 0:rwtf: T
||===== Player:0:rwtf: Did 7 Loads
||===== Player:0:rwtf: Dropped 196 Logs
||===== Player:0:rwtf: Gained0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Using Steel axe
Woodcutting level is 48, keep it up :)
Oak. A long living tree with gorgeous leaves.
Chopping Tree
Chopping Tree
Found a box, solving…
Question is:
Which shape has number 4
GetBoxSide
Star : 7
Found a box, solving…
Question is:
Which shape has number 6
GetBoxSide
NextPlayer(Active: False);
New client targeted

I just get an maths.scar error, line 46.

From: loony383
I just get an maths.scar error, line 46.

You didnt set it up right. Follow the tut to set it up correctly.:spot:

From: RWTF
Ecellent! but theres a problem with the anti-randoms i think…

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 26 Minutes and 45 Seconds
||===== Player 0:rwtf: T
||===== Player:0:rwtf: Did 7 Loads
||===== Player:0:rwtf: Dropped 196 Logs
||===== Player:0:rwtf: Gained0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Using Steel axe
Woodcutting level is 48, keep it up :)
Oak. A long living tree with gorgeous leaves.
Chopping Tree
Chopping Tree
Found a box, solving…
Question is:
Which shape has number 4
GetBoxSide
Star : 7
Found a box, solving…
Question is:
Which shape has number 6
GetBoxSide
NextPlayer(Active: False);
New client targeted

Srl problem, not the script :).

I have addy axe and it can't find it?

found it now :D

>.>

kinda doesn't wait very long.. it starts to cut a willow then goes to a diff willow..

1 Players
Welcome to Runescape.
************
Using Addy axe
Woodcutting level is 36, keep it up :)
Willow. The best way for xp in RuneScape.
Chopping Tree
Chopping Tree
Chopping Tree
Chopping Tree
Chopping Tree
Chopping Tree
NextPlayer(Active: False);

:o

Pwnt, yeah I know. I noticed that when I uploaded it but was just lazy to change…

~Camo

Reallly good script, only died a few times and the dragons class random throws it off, but other than that great work :)

Does this drop?

Well it is a POWERchopper so yes, it does drop ;)

~Camo

Running just now going really good so far.

You should do a mining script.

Ill get you a proggy later.

I got an error as follows:

Line 36: [Error] (36:1): Unable to register function function FindGapsTPA(TPA : TPointArray; MinPixels: Integer): T2DPointArray; in script C:\Users\Trim\Desktop\AnyTreePowerCutterV1.0[SMART].scar

Lookin Good :D


==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 57 Minutes and 20 Seconds
||===== Player 0:rwtf: T
||===== Player:0:rwtf: Did 13 Loads
||===== Player:0:rwtf: Dropped 364 Logs
||===== Player:0:rwtf: Gained0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Using Black axe
Woodcutting level is 53, keep it up :)
Oak. A long living tree with gorgeous leaves.
Chopping Tree
GTL: Mordaut
NextPlayer(Active: False);

It's not detecting my axe anymore using SMART

From: hamish909
It's not detecting my axe anymore using SMART

stop script, close it, start it up again, right when you press play, minimize everything you have open, and once smart opens, mini it.. wait a while and then do whatever..

theres a problem with smart losing it's canvas and it might mess with axe finding? dunno.. but worth a shot :)

I seem to have come to the base of the problem.

My iron axe and the fact that I had one axe equipped and one in my inventory using an adamant axe however it works fine.

Another problem I have noticed is that it occasionally stops after 1 or 2 loads and in the script says it's going to switch to my next player but it says my next player is set to 'False' in the script which it isn't.

Any ideas why this happens? It also doesn't seem to be able to detect drunken dwarf.

It's running SMART in the background seems to be attempting to solve it but the mouse isn't doing very fast. But in the end it solved it.

You should also add an option to drop things that you get from random events such as 200GP sapphire gems kebab and beer, that kinda thing. Ill get a proggy in later.

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 36 Minutes and 38 Seconds
||===== Player 0:rogg: F
||===== Player:0:rogg: Did 9 Loads
||===== Player:0:rogg: Dropped 252 Logs
||===== Player:0:rogg: Gained0 Woodcutting Levels!
||===== Player 1:frer: T
||===== Player:1:frer: Did 9 Loads
||===== Player:1:frer: Dropped 252 Logs
||===== Player:1:frer: Gained0 Woodcutting Levels!
||===== Player 2:ding: T
||===== Player:2:ding: Did 9 Loads
||===== Player:2:ding: Dropped 252 Logs
||===== Player:2:ding: Gained0 Woodcutting Levels!
===================================================

From: Pwnt by Pwnt
stop script, close it, start it up again, right when you press play, minimize everything you have open, and once smart opens, mini it.. wait a while and then do whatever..

theres a problem with smart losing it's canvas and it might mess with axe finding? dunno.. but worth a shot :)

smart losing its canvas wouldn't just make the axe finding mess up… it would not let the script do anything so to say!

>.> well.. idk :P it wouldn't find my axe then I did the minimizing thing and it did.. :o

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 17 Minutes and 1 Seconds
||===== Player 0:olar: T
||===== Player:0:olar: Did 2 Loads
||===== Player:0:olar: Dropped 56 Logs
||===== Player:0:olar: Gained20 Woodcutting Levels!
||===== Player 1:porl: F
||===== Player:1:porl: Did 2 Loads
||===== Player:1:porl: Dropped 56 Logs
||===== Player:1:porl: Gained20 Woodcutting Levels!
===================================================

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 29 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 2 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

Only problem is that if you are cutting Oaks on one character and you choose to cut normal trees on another it sometimes attempts to cut oaks instead of normal trees.

Apart from that it's good although I had to do a few randoms for it because it just seems to ignore them.

From: hamish909
==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 17 Minutes and 1 Seconds
||===== Player 0:olar: T
||===== Player:0:olar: Did 2 Loads
||===== Player:0:olar: Dropped 56 Logs
||===== Player:0:olar: Gained20 Woodcutting Levels!
||===== Player 1:porl: F
||===== Player:1:porl: Did 2 Loads
||===== Player:1:porl: Dropped 56 Logs
||===== Player:1:porl: Gained20 Woodcutting Levels!
===================================================

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 29 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 2 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

Only problem is that if you are cutting Oaks on one character and you choose to cut normal trees on another it sometimes attempts to cut oaks instead of normal trees.

Apart from that it's good although I had to do a few randoms for it because it just seems to ignore them.

that's cuz they have the same colors not because it gets confused.. it's pretty hard for scar to get confused :P

Ok, I fixed the dropping and should have fixed the switch players.

MAKE SURE YOU USE THE NEW UPLOADED VERSION!!! THESE PROGGIES ARE FROM THE OLD UPLOADED ONE!

~Camo

Does your script find Normal/Oak differently?

Mine doesn't, for some reason.

seems to work fine, nice script, thanks :)

From: ToF
Does your script find Normal/Oak differently?

Mine doesn't, for some reason.

When I tested the script it found them fairly easy, but I still haven't had a problem with them. I'll probably do some more testing and see how that goes.

~Camo

Seems to be a peculiar problem. Their colours are too similar I suppose.

I'll have to work on finding some unique tree colours from the normal tree :)

thank-you for the great script heres a proggy

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 40 Minutes and 23 Seconds
||===== Player 0:ran: Did 10 Loads and dropped 261 Logs and you gained 0 Woodcutting Levels!
||===== Player 1:gun: Did 10 Loads and dropped 261 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
Using Steel axe
Woodcutting level is 67, keep it up :)
Willow. The best way for xp in RuneScape.

its reali nice… i like it..:D
except the SMART version doesn't seen to work (or maybe just not with me)

it keeps saying that it didn't find axe and then "smart" trys to log my char out but doesn't click "log out"

=]

i tried your script but all it seemed to be was nothing for 10 seconds then terminate itself

great script! level 10 now, using it now!

Which version of SRL/Scar does this run on?

From: dre_bro11
Which version of SRL/Scar does this run on?

SCAR 3.15 Rev30 SRL

ok so i try to run it in 3.14 scar and Srl 4, 30 and i get this error in line 393
Line 393: [Error] (15207:8): Unknown identifier 'AllPlayersInactive' in script C:\Users\Ethan\Documents\Downloads\AnyTreePowerCutterV1.0 (1).scar please help

From: Ethan1221
ok so i try to run it in 3.14 scar and Srl 4, 30 and i get this error in line 393
Line 393: [Error] (15207:8): Unknown identifier 'AllPlayersInactive' in script C:\Users\Ethan\Documents\Downloads\AnyTreePowerCutterV1.0 (1).scar please help

you need 3.15…

had a problem with spirit so try and fix that and heres proggie

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 55 Minutes and 24 Seconds
||===== Player 0:wood: Did 15 Loads and dropped 405 Logs and you gained 1 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
Using Rune axe
Woodcutting level is 71, keep it up :)
Willow. The best way for xp in RuneScape.
Chopping Tree Using Left Click

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 42 Minutes and 1 Seconds
||===== Player 0:wood: Did 7 Loads and dropped 189 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Hmm, I seem to be having a problem running the it for more than 2 loads. Every time I keep it on runescape reloads or something and I think the crosshairs arn't on it anymore and the mouse goes to the top right and stays there. Is this a normal problem or is it just me?

It's normal if you use Chrome.

I'm using firefox, would using IE work better?

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 6 Hours, 58 Minutes and 50 Seconds
||===== Player 0:hue: Did 11 Loads and dropped 308 Logs and you gained 0 Woodcutting Levels!
||===== Player 1:trash: Did 11 Loads and dropped 308 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Successfully executed

From: destroyergla
==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 6 Hours, 58 Minutes and 50 Seconds
||===== Player 0:hue: Did 11 Loads and dropped 308 Logs and you gained 0 Woodcutting Levels!
||===== Player 1:trash: Did 11 Loads and dropped 308 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Successfully executed

Not to be mean but that seems kind of fake. 6 hours and only 11 loads?

~Camo

it is 22 loads with both characters….


anyways, does anyone else get that problem? I can't run it for very long…..

good script lookin for a banker now

Very nice !! i used it for like 1k willows and it worked perfectly for me, wcing at rimmy willows btw, but 1 idea, maye a option to remove the sound but its very irritating that chopping sound.

My progress:
By the way tested on a account with only 44 woodcutting :P and it was crowded

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 9 Minutes and 28 Seconds
||===== Player 0:wicked: Did 3 Loads and dropped 80 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 16 Minutes and 38 Seconds
||===== Player 0:Supe: Did 37 Loads and dropped 1006 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

i got me 8 lvls up with this! ^^^

From: kingstun
==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 16 Minutes and 38 Seconds
||===== Player 0:Supe: Did 37 Loads and dropped 1006 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

i got me 8 lvls up with this! ^^^

humm?>

From: jakeyboy29
humm?>

I have a gay level checker :p Thanks for using tho :D

~Camo

Im going to try this out, thanks for putting the time into this little peice of scripting :P.

sorry im new to this, this looks really good but i dont exactly know what to do, do i leave my character somwhere and on the bit where it says // your runescape username do i just put it next to that or delete it and put that

sorry im noob :(

You delete it

Works perfect:) But I can't say to much since this is one of the first times I have used SCAR

Well now that I have used it for quite awhile, I see a few errors. First is that it has some trouble actually finding the trees that you want to cut. It doesn't search for colors and usually just moves the cursor in a very small section of the screen, and usuall thats where the tree used to be, and never finds new trees. It also has a low wait time, and starts clicking trees before any logs have been cut. Even so, I did use it sucessfully for about a half an hour, which gave me time to do my homework :D


==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 34 Minutes and 12 Seconds
||===== Player 0:rwtf: T
||===== Player:0:rwtf: Did 8 Loads
||===== Player:0:rwtf: Dropped 224 Logs
||===== Player:0:rwtf: Gained0 Woodcutting Levels!
================================================== =
======= Don't forget to Rep++ if you like ======
================================================== =
==============NO PROGGY'S NO UPDATES!=============
================================================== =


EDIT: For some reason THe SMART version also doesn't work, although its probably my end:

[Runtime Error] : Exception: in line 46 in script C:\Program Files\Scar 3.15\includes\SRL/SRL/Core/Math.scar

Ooh, this works with any tree right? including Magics?

From: Pure1def
Ooh, this works with any tree right? including Magics?

why the freak would you want to powercut magics…newb

this is the first ever script that ran for me on runescape, it worked perfectly.:spot:

From: mormonman
why the freak would you want to powercut magics…newb

ME!

No, I wouldnt. But maybe if you did not know how much magics are worth and or that willows gives more exp, then you would powercut yews :p

this bot is really nice i loved it..works awsome thanks!

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 20 Minutes and 37 Seconds
||===== Player 0:o0nz: Did 2 Loads and dropped 56 Logs and you gained 0 Woodcutting Levels!

It failed antirandoms,3 randoms missed.

worked fine for me ..thx

It loggs me out after 20-30 minutes?
This might be because of my internet

Anyways, I forgot to copy the proggy, but it worked for (all of this is numbers is not exactly) 25 minutes, did 7 loads and dropped 200 logs :)

this bot is alright…but for soem reason i like the one on top more…idk why its just easier to use i guess or something…but i mean hey this one still works great to..

It dosen't matter, This script was clearly one of the best ones i have used.
Nice work! =)

Didn't run it for long, but what I saw -

- Sometimes clicks tree before finishing the current one (I don't think you have anything to prevent this from happening? I might have overlooked it)
- Sometimes doesn't drop all of the logs


If those things could be fixed, this would be an amazing script ;)

Another awesome script to add to my collection :f:
Just kidding, really good script.

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 17 Minutes and 22 Seconds
||===== Player 0:swif: Did 27 Loads and dropped 756 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Did alright =)

i dont know why but everytime i get to 2 loads done the script makes me walk around everywhere and i cant get anything dont with it can some1 help me??

Hey, i got a runtime error on line 85 of the script, just wanted to let you know. and if possible, how do i fix it? i followed the instructions and all.

ye kinigit i get same error could someone please reply

I tried SMART version of the code, but I get this error:
[Runtime Error] : Exception: in line 46 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/Math.scar

The SMART version of this fails to recognize the Sandwich Lady, I found myself in random place upon returning to my computer.

Just though I'd point that out.

Thanks this script works great

The smart version doesn't seem to do any of the random events for me.

From: dphrocker1
The smart version doesn't seem to do any of the random events for me.

Same with me, you may want to look into this Kyle.

Random solving failure's are nothing to do with scripts. SRL Anti-Randoms arent working as they should at the moment. That is an SRL problem, not this script's problem.

:f: All i can say is ,after a few set up probs, this script is working perfectly. i have had some random event mishaps but as torrent of flame said "its a SRl prob. Keep up the good work and please keep this up. ure just to good ;) .

hmmmmm ill try it. hope it will powerchop yews for me alnight =)

well so far its done 2 invents of yews and solved a box!

this might be the power chopper im looking for! rep+

Good Script Works Wonders for me

la-la-la-love it, works great :)

When im starting it its only checking my inventory , my equipment screen and my skills. and scar says no axe was found..?


what is wrong? please PM me:eek:

Ill try it

The anti-randoms system does not work at all, are you sure you put one in?

Well, I've probably started the script (SMART version) fifteen times, and it probably only worked more than 10-15 minutes twice. I would get a random, like a mysterious box, and it would try for a while, let the box multiply a few times, and log out. I'm not exactly sure how much I should expect from the anti-randoms on any script, I mean nothings perfect, but I expected loads more than this. I was really happy with this script until it started failing randoms and logging out. To top it off, I died. I failed to survive a random event, and lost 1.5-1.8M worth of stuff. Look, I know it wasn't the smartest idea in the world to wear expensive stuff while running a script, but the first few times I ran the script the anti-randoms were flawless. The anti-random script seemed to deteriorate over time. Maybe I'm expecting too much?

So happy that tomorrow is my 7th day. :D

Wow thanx, great work, gonna post progress report here later:P

hey dude, works great! i'll post proggy soon =D
(that fixed version the guy posted at begginning of thread Failed me misserably! Your SMART version is perfect for what i need!)
i dont trust it enough to run while im not there, but its great just for wc while i sit here and read =D:D

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 35 Minutes and 40 Seconds
||===== Player 0:Kolo: Did 12 Loads and dropped 316 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

then it just stopped after this.
im making a couple little tweaks, but again, Works exactly how i expected it would!

Kolo, thanks for the proggy! :D As for you ScriptNoob, the randoms not working is not my fault tbh. It's Srl's. I'm sorry that you lost so much.

~Camo

It cant find my axe :\ any suggestions?

nice i love it 42 - 45 wc in 39 mins

Im still using this script Camo, it's great :)


D~M

You Need SRL Stats.
1 Players
[Runtime Error] : Exception: Canvas does not allow drawing in line 102 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/Players.scar

Help plz? :P
(i just started, this is my first try :O)

it says cant find axe but i have 2 axes, could you help?

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 46 Seconds
||===== Player 0:iig3: Did 0 Loads and dropped 0 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
No axe was found.

From: Einstein
You Need SRL Stats.
1 Players
[Runtime Error] : Exception: Canvas does not allow drawing in line 102 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/Players.scar

Help plz? :P
(i just started, this is my first try :O)

I got similar thing, only the file location is difrent but yeah, thats normal :rolleyes:

I am(obviously) new to this stuff. This script works, but it seems to click too often. As most people know if it clicks on the tree again too soon it restarts cutting logs. On another note, I have looked around a bit but haven't seen one. Can someone link me to a tutorial on posting progress reports…. I am sure that sounds extremely noobish, but it will be beneficial to any script writers. I would be happy to post my proggys..if I knew how.

Oh, about my last post. Just thinking about it, I am sure someone could just quick explain it for me. If there is no tutorial, or it seems to pointless to seek one out for me, please just let me know how to save/record/post my progress reports.

im running and it works perfect thanks

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 3 Hours, 19 Minutes and 10 Seconds
||===== Player 0:sky: Did 15 Loads and dropped 420 Logs and you gained 0 Woodcutting Levels!

awesome script this is amazing. Works great with randoms, I got 3 fights and 2 boxes worked flawlessly.

++rep :D

hey im new here and i use this script, i really like it but somtimes after like 3 loads it stops log out,. and then i ve to start it again and somtimes i start in a classroom with a dragon.. ? wat to do about this not happening again,
thanks Paas:p

Great script, has been working for me flawlessly. Thanks!

im running and it works perfect thanks

sorry about double post

Worked this last night.

Boosted by WC from 58 to 62.

I've lost the proggy :(




But I had to fix your anti-randoms before i ran it.

i tryed this script and it works great the only problem i had was it had trouble on one of the box random events

A proggy for you Camo:

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 1 Hours, 56 Minutes and 23 Seconds
||===== Player 0: Did 38 Loads and dropped 1064 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Great script.
Hopefully this is one of top 3 proggys here.
Still got the top 1, thanks :p


~D-M

wow dude. this deffinitly is the bomb and as a little thank u heres a little proggy. ive had no probs with this script overall and so far its got me about 4 levels so far. thanxz a lot dude - quick it up. :cool:

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 18 Minutes and 56 Seconds
||===== Player 0: Did 15 Loads and dropped 420 Logs and you gained 0 Woodcutting Levels!
================================================== =
======= Don't forget to Rep++ if you like ======
================================================== =
==============NO PROGGY'S NO UPDATES!=============
================================================== =

Thanks for everybody using and posting proggies! :D

~Camo

From: Camo¤Kyle
Thanks for everybody using and posting proggies! :D

~Camo

You're welcome :)


~D-M


EDIT: When i get attacked by an ent it runs to short, i just keep getting attacked.
So if you make it run a little longer, that should solve it :)


~D-M

||===== Time Running : 4 Hours, 40 Minutes and 20 Seconds
||===== Player 0:kill: Did 19 Loads and dropped 532 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

dont know how acurate this is but i woke up to it so yeah lol rep ++++
it would be great if you could add more anti randoms such freaky forester,
book of knowledge random,and evil bob, and evil twin sister also it would be nice if it dropped the random event items such as gems and and all the stuff the sandwich lady gives you

||===== Time Running : 6 Hours, 11 Minutes and 21 Seconds
||===== Player 0:kill: Did 29 Loads and dropped 783 Logs and you gained 1 Woodcutting Levels!
================================================== =
======= Don't forget to Rep++ if you like ======
================================================== =
==============NO PROGGY'S NO UPDATES!=============
================================================== =

Still a great script !

looks nice, could help get req. for lost city.

I just realized how stupid I am. Expect a proggy next time I run this(probably overnight.)

Nice script.Will post proggie once it finishes, i'm using now btw!

it couldn't find my axe.

This one doesnt work for me. It says that it can't find my axe.. First i put my axe in my invo then i wielded it didnt work eather way.

it works very good im gonna use it alot:cool:

i think i did something wrong somone plz help im new at scar it says unknown identifier 'createtmpfrombmp'

The SMART version is absolutly perfect. Very nice script, Well Done. :)

kept finding errors in different lines. gave up in the end :(

i was using your regular script and it keeps failing on line 238 funny because line 38 is end…….help

Line 238: [Error] (274:1): Duplicate identifier 'TBox' in script C:\Program Files\SCAR 3.15\includes\srl\srl\core\Globals.scar

look rly sory to bother u but im new plzzzzz help?

Line 8: [Error] (45:1): Unknown identifier 'SmartMoveMouse' in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Misc/Smart.Scar

You cant talk to people while autoing?

to those getting errors make sure you have downloaded the last version of Scar, SRL and SMART.

@Shenkai:
Nothing hard about posting a proggy. A progress report is that piece of text (usually in debug box) where it says for how long your characters have been running.

@B o l t o n: i'll let you find out where that edit button is;)

~RM

love this script, got it working and its a treat, only problem is i've been hit by the sandwich lady a few times wich is anoying, could someone try and alter it so it solves randoms like the demon teacher i had to do that, will post proggy in about 30mins

Bolton

||===== Time Running : 1 Hours, 35 Minutes and 20 Seconds
||===== Player 0:ruse: Did 13 Loads and dropped 364 Logs and you gained 1 Woodcutting Levels!


Awesome :P finally, alls i need now is a banker, anyone edit it so it can?

longest i have used it for, it could of carried on but i got tocome off so im going to post the proggy, proof it does work for a long time, just keep an eye on it becuase it ignores the mysterious old man and sandwich lady and send you else were, to sort out you've got to pause the script and turn smart off, get back to were you were and press play and enable smart, bit anoying but very good script apart from that.

Bolton

The longest the bot ran for is 23 min…. and then it just logs me off..

the smart version doesnt seem to detect my wielded axe?;/

Smart -
==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 1 Hours, 50 Minutes and 44 Seconds
||===== Player 0:ruse: Did 18 Loads and dropped 491 Logs and you gained 1 Woodcutting Level!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
Successfully executed


/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 29 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 2 |
| Fights : 3 |
| Talks : 4 |
| Sandwiches : 1 |
| Lamps Solved : 1 |
| Frog Solved : 1 |
| Ents Found : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

wow, thanks this works really good!

Thanks for the script :p WIll use it.

how u download?

click on the links underneath the first post by camo kyle, click on the smart version, its alot better, the links are underneath this bit of txt on the first post on the first page

"If yall would be so kind and not leech it, please post proggy's. NO PROGGY NO UPDATE! If you have any suggestions or bugs or anything at all please post here, do not PM me. Sorry that this isn't an elaborate intro, but it's my first one Hope yall enjoy!

~Camo"

Thanks for using. :D When I get free time I'll try to totally revamp it. I'm glad it is still working.

~Camo

===========================================================================================
==================================AnyTreePowerCutter by Camo Kyle==========================
===================== Time Running : 1 Hours, 23 Minutes and 9 Seconds=====================
===Player 0:omtu: Did 9 Loads and dropped 252 Logs and you gained 0 Woodcutting Levels!====
===Player 1:yena: Did 9 Loads and dropped 252 Logs and you gained 0 Woodcutting Levels!====
===========================================================================================
===========================Don't forget to Rep++ if you like ;) ===========================
===========================================================================================
===============================NO PROGGY'S NO UPDATES!=====================================
===========================================================================================

woot your awesome!!! ps i did edit that so equal signs would be… boxy..

Nice WC. Not the greatest but then again it's free for all.

Awesome,it uses smart!

Need more scripts like this! :D

erm.. can anyone help me when i tryed to run this macro this keeps coming up :( what do i need to do to make it work? and if i get it working i will post a progress report :p

Line 46: [Error] (285:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/Math.scar

well i recommend that you download all SCAR includes or redownload the hole program again usually works
hope it helped
J.Z

nice script! works very well xD

Really good, working script.

very nice script! works great for me

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 48 Minutes and 15 Seconds
||===== Player 0:always for: Did 28 Loads and dropped 756 Logs and you gained 1 Woodcutting Levels!

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 39 Minutes and 41 Seconds
||===== Player 0:well: Did 4 Loads and dropped 112 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
works great thanks

ty, nice script. its working ^^

nice script worked for about 3 hours and 30 minutes until a random came, gj though :). Leveling would be faster if it could bank.


==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 3 Hours, 27 Minutes and 0 Seconds
||===== Player 0:pker: Did 40 Loads and dropped 1094 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

This is a great script…. it got me 0-60 in a couple of days… i didnt leave it on continuosly but eventually it got to 60… so thanks a bunch for this

It keeps telling me no axe was found. Weather I have it equipped or in my invent.

good good

nice thanks man. easy wc lvls :)

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 42 Minutes and 17 Seconds
||===== Player 0:Ofc: Did 11 Loads and dropped 308 Logs and you gained 0 Woodcutting Levels!

nice script. gotta 31 wc :) training 60

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 12 Minutes and 41 Seconds
||===== Player 0:****: Did 1 Loads and dropped 28 Logs and you gained 0 Woodcutting Levels!
===================================================

Great script, thanks a bunch for it. Only problem I had at the start was that I was cutting standard tree's, which are called "Tree" in the game. I put that into the DeclarePlayers section, and the script didnt work. So I had a look through the code and found out I was supposed to put in "normal" for standard trees :)

Apart from that, no real issues at all. One slight problem is the proggy, it says I gained 0 Woodcutting levels when infact I gained 8. Nothing major, just thought I'd point it out. Probably something on my end anywho.

EDIT: Using the SMART version now, works like a charm (after I added world 165 to worlds.ini, gotta support my country's server and all.. :) )

wow way not to help the people who can find the axes…

Ive been using it for some time now :)

I like it :D

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 50 Minutes and 40 Seconds
||===== Player 0:Koww: Did 4 Loads and dropped 112 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
Going to let this run and hope i gets 40 WC by tommorrow :D

~Sophos

Nice gona check it out when am back from school

Hey nice Script, helped me out loads thanks. I dont do scripting and so I apreciate people who do it because it looks quite complex. So thanks!

how come on the code it says the same thing at top llike 4 times when it says username and assword and all that






thenwhat do i do for the active bit where it say is it script or not

great powercutter =]

bout to try, ill post a proggie in a bit

Great script just it only lasts e an hour of time before I get teleported somewhere else

From: Sinking Poop
Great script just it only lasts e an hour of time before I get teleported somewhere else

This is probably because the SRL randoms are not at their best ATM.

Great script i love the Smart i can do otther stuff

nice script i was lvl 51 now i am 60 in like 5 hours or less

So I was trying to use this and I cant figure it out. Can you explain everything you need to fill in. I dont know if im not filling stuff in right or not. If anyone can help that would be amazing

looks nice.. i will test it

what all do I have to fill in? and do I get rid of the // when filling in name and stuff? and what do I put after active??

u guys are pro scripters, this is so well made X_X

nice script works perfectly

THIS BOT IS THE SHIT!!

Thank-You!

how come it wont work i get when it try's to start smart

Very nice! I'm using it right now and it's already gotten me from 67 to 71 without any trouble. I'll report back if I see any problems but I don't think that will happen :)

Yayy my first proggy :P

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 3 Hours, 51 Minutes and 7 Seconds
||===== Player 0:ach: Did 41 Loads and dropped 1144 Logs and you gained 0 Woodcutting Levels!


Is this right for a proggy? :P

stopped due to molly random
GTL: Molly Evil Twin
We seem to be in the molly random
Molly: Something went wrong. All your base are belong to us

Great script <3 it almost got me to 60 woodcutting (:

Camo Kyle, you rock :D

works great

im new to all of this so im not sure where to put my username and pass.
where it says…

Players[0].Name := ''; // your runescape account
where do i put my username at?

another quality script keep up the good work!!!


=AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 3 Hours, 36 Minutes and 28 Seconds
||===== Player 0:oop: Did 32 Loads and dropped 896 Logs and you gained 0 Woodcutting Levels!



I don't know why it said i gained 0 woodcutting lvls i gained like 10 but it dosen't matter :D

adepteradicator you put it in between the brackets.

All i got to say is…omg thanks..it got my woodcutting to 72!!!

didn't work for me missing some .dll files, its late now so im a bit lazy to figure it out now :)

edit actually i got it to work will see how it goes!

From: twopint32oz
I tried SMART version of the code, but I get this error:
[Runtime Error] : Exception: in line 46 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/Math.scar

i get this error too please help i wanna be able to run this overnight. :(:confused:

Ty so much <3

hehe 2nd script ive tried so far :P (first one being save the gold fish thingy lol) worked great, thanks :>

Very reliable, awesome!

first proggy ever :D
==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 3 Hours, 34 Minutes and 12 Seconds
||===== Player 0:sic: Did 26 Loads and dropped 728 Logs and you gained 1 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

stopped at molly random

i have a problem on line 85..
i tried 900 scripts but none works..
i realy want a yew chopper bot.. for f2p..
for the last 2 days im trying to find but i cant.. please guys help me

thanks it works great! only bad thing is that sometimes it continually clicks a tree when i'm cutting it, but it's great thanks!

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 53 Minutes and 42 Seconds
||===== Player 0:******: Did 13 Loads and dropped 362 Logs and you gained 2 Woodcutting Levels!
===================================================

Hmm, It just stopped after about an hour and said something like Nextplayer Active = False or something like that.. help anyone please? Thanks

i used this and it worked perfectly ty!!!!

It stops every few hours for me, but it's the best script i've used!! I got from 35-60 wc in the last day! Would be great if there was an option to bank though :)

I'll try it out.

Where do i set my account?

Works great, lvl 21-36 with no problems!

Heres my proggy :D
==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 51 Minutes and 53 Seconds
||===== Player 0:lac: Did 35 Loads and dropped 960 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Great script just needs to be updated a little.Just my opinion.

This got me to 48 woodcutting to 61 cutting and i got my dragon axe:) thanks! Sorry i lost the proggy.

Got my wc from 34 to 50 today =)

Sorry, I'm the new guy, I don't know stuff, blah blah blah and I'm not used to bots like this, because I usually use Rsbot.

Do I manually type the name, or do I find the color for the tree.

And I'm probably gonna get this. :google:

Great script!! this is my 5th day using it, I keep it on for at least 5 hours a day although I didn't use it much on one day, and I've gone from 35-73 wc!! I was going to post my proggie last night, it worked for over 3 and a half hours and gained 120,000 XP, but unfortunately my computer turned itself off, so I will post a Proggie later :)

Something that might need fixing though, maybe it's the new welcome screen, but the mouse cannot locate the 'click here to play' button when you log in since the Easter update, and it would be great if you could make one for yews or one that banks!

so far everythings good… thanks =]

This is a fantastic script! It works great! I have been running it for about 6 hours a day and I have had no problems with it! I first tested it on a freshly made account and got from level one wcing to level 51 in a matter of hours!

The only problem I have encountered is when smart starts up it will not click the 'play here' button but other then that it is completely smooth!

i absolutely love it. perhaps add in function to allow players to control worlds they log into. what i mean it random worlds. or random members only, random free to play only worlds etc. or to make a custom set of worlds to log into.

what do you think?

awsome script worked perfectly ty!!!!!!!!!

Great script so far, i like the Smart mode, first ever time on using smart, looks really sound..

Using it on my main, LVL 68 WC, Ill post later on how many Loads done etc.

Thanks

Jack

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 53 Minutes and 28 Seconds
||===== Player 0:*****: Did 10 Loads and dropped 292 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

HTTP/1.1 302 Found
Successfully executed



Working on my WillowMuncher Now =)

great script…

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 31 Seconds
||===== Player 0:***: Did 0 Loads and dropped 0 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
No axe was found.

Im using "Bronze Hatchet", found outside a chicken pen in Lumbridge, is this not an Axe?
Should I try with another axe?
Or is this because of the Easter Event?

awesome script works great :)

No worries, I read through the post, I entered "Tree" at the Tree you want to cut, but I when entered "Normal", it worked just great, thanks :D

ROAD TRIP! I left my computer on for about 20 hours, after 15hours it encountered some random and logged me out. Script works amazing.

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 15 Hours, 46 Minutes and 12 Seconds
||===== Player 0:scar: Did 264 Loads and dropped 7392 Logs and you gained 6 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Spectacular Script =O

I've been looking for 10 days for a working one. AWESOME!
This deserves a proggy for sure ;)

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 13 Minutes and 5 Seconds
||===== Player 0:hawk: Did 1 Loads and dropped 28 Logs and you gained 0 Woodcutting Levels!
================================================== =
======= Don't forget to Rep++ if you like ======
================================================== =
==============NO PROGGY'S NO UPDATES!=============
================================================== =

Use this script for all of your woodcutting needs.

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 3 Hours, 15 Minutes and 16 Seconds
||===== Player 0:****: Did 14 Loads and dropped 392 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Going to test this script out today

it cant find my axe.. I'm wielding a bronze hatchet.. does it not pick up bronze hatchets??

@bobjohn, yes it does. At least to me, when I was wielding it

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 9 Hours, 9 Minutes and 50 Seconds
||===== Player 0:****: Did 60 Loads and dropped 1680 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Wohoo! Really good script!!

SICK i cant wait to use this, i'll post a proggy soon :)

this worked great for me, ideal first script to ry out.

Seems like a great script, havn't used it for a long time yet but when ill do ill try and get a prog rep up :)

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 17 Minutes and 31 Seconds
||===== Player 0:***: Did 27 Loads and dropped 756 Logs and you gained 0 Woodcutting Levels!
===================================================

works great! - only thing I noticed is it won't click the "Click here to play" button right when you log in, but If you start it logged in, everything works great.

Great script, got me from 55 to 60 woodcutting in no time! can't give a good proggie because my net kept on dcing :(

loved it!great script! got me up levels in no time

Just tested it out a bit did 10 loads smoothly and dropped. No problems to report.

idk why it is… but it cant find the axe when starting up

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 6 Hours, 34 Minutes and 22 Seconds
||===== Player 0:***: Did 115 Loads and dropped 3198 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
yeeeaaahh :DD

great script, haven't had any problems with it since it not detecting my axe at first.

+rep+ :D

kyle I love your script - just great proggys one after another

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 5 Hours, 9 Minutes and 34 Seconds
||===== Player 0:***: Did 91 Loads and dropped 2548 Logs and you gained 1 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Haha, I'm glad it's still being used. Maybe someday in the future I'll revamp it. But not now. Thanks for using it still everyone. :)

~Camo

uhh sorry to bump up an old thread, but this script got me 99 wc :D
thank you kyle!

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 49 Minutes and 0 Seconds
||===== Player 0:pure: Did 15 Loads and dropped 420 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================


Best wcing script i've used. (Though only been here 2 days :p)
Can't wait until you update it so it banks.

EDIT: And also, can someone explain why scripts have a limit before they stop? Is there any way to make the script go until you stop it.

its the BEST script i've ever used
it's even better than the one i've paid for.
VOUCH for camo (i know its wrong way to use)
ty for this script

this was great because i got about 300 loadsin 1 long night

nice


==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 5 Hours, 19 Minutes and 33 Seconds
||===== Player 0:udie: Did 108 Loads and dropped 3021 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 3 Hours, 3 Minutes and 45 Seconds
||===== Player 0:momm: Did 50 Loads and dropped 1400 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================


and im running it still its a great wcer, i really hope if you update it it banks thatd be great! and smart is the best for this. im gunna run to 99 wc probably and ill post more as i go :)

it cant solve the game show random :S but oh well. it msuta been idlying for a good hour otherwise shes good


==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 5 Hours, 55 Minutes and 6 Seconds
||===== Player 0:momm: Did 82 Loads and dropped 2296 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

Thanks for the macro!

I'm 99% sure this is my fault because I haven't run any Scar files before but I'm getting this error message in the debug box:

Line 4: [Error] (73:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\SCAR 3.12\includes\SRL/SRL/misc/SMART.scar

I have no idea what to do and I'm a nub so if someone could help me out I'd be really glad.:confused:

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 10 Hours, 38 Minutes and 50 Seconds
||===== Player 0:momm: Did 152 Loads and dropped 4242 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
No axe was found.
Woodcutting level is 88, keep it up :)
Willow. The best way for xp in RuneScape.





UPDATE:


AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 17 Hours, 29 Minutes and 40 Seconds
||===== Player 0:sta: Did 253 Loads and dropped 7084 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
No axe was found.
Woodcutting level is 90, keep it up :)
Willow. The best way for xp in RuneScape.
Chopping Tree Using Left Click
[Runtime Error] : Exception: Access violation at address 02F0DACD in module 'WizzyPlugin.dll'. Write of address 6B1A3F2A in line 587 in script C:\Program Files\SCAR 3.20\includes\SRL/SRL/Core/Text.scar

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 32 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 2 |
| Pinballs Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/









mad probs for you mate! :) thanks

Best proggy yet, here it is. Thanks for this, its been working like a charm lately…

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 6 Hours, 1 Minutes and 25 Seconds
||===== Player 0:3n: Did 54 Loads and dropped 1486 Logs and you gained 0 Woodcutting Levels!
===================================================

Well, after so many successful stories I hate to post this but it's a must. After being away from scar for quite some time, I figured I'd start back up with your lovely script. Well, it gets to the log in screen, does all its setting changes and when it types in my user name that's when it messes up. :eek:

My name is 2 words separated by a dash ( - ) . When it types in my name, it completely ignores the dash and types the name without it preventing it from logging in. :confused:

I have used other macro's in the past with SCAR so I know that I'm not completely unable to macro. Just thought you should know in case more people with dashes in their name try, they're not the only ones. :spongebob:

EDIT: Sorry, nooby mistake. I replaced the dash with a space and it worked. Will reserve for proggies.

2nd EDIT: As promised, here's the proggy. I ran for little over an hour until it began to rapidly spin on the freaky forester random for about 30 minutes. It also doesn't say how many levels I gained, I gained 6. All the posts above mine they left theirs on for what looks like a pretty decent time and all say 0 levels also.

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 1 Hours, 16 Minutes and 57 Seconds
||===== Player 0:evil: Did 6 Loads and dropped 161 Logs and you gained 0 Woodcutting Levels!
===================================================

Very lovely script btw, I appreciate it. Will definitely be using for a while :D

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 40 Minutes and 30 Seconds
||===== Player 0:amshroom: Did 8 Loads and dropped 203 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
HTTP/1.1 403 Forbidden

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 12 Hours, 42 Minutes and 31 Seconds
||===== Player 0:amshroom: Did 64 Loads and dropped 1912 Logs and you gained 0 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================
HTTP/1.1 403 Forbidden

Damn, it's still running? That's surprising. I'm glad it still works, and yeah I know about the woodcutting level counter. I've just been so busy with work that I haven't had a chance to fix it.

~Camo

It looks very nice. Will test it soon, thanks!

this has got to be the best power chopper i have used. yesterday it ran for about 2 houirs and cut about 700 logs for me. thanks man.

klebs if you spam one more time I will have to report you to higher authorities.

T~M

Beautiful script Camo, thanks.
I ran it with just 1 account on an area with 2 oaks that are hard to find from each other (script also checks alot of trees around there to see if they are oaks) so it was quite slow but:

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 35 Minutes and 18 Seconds
||===== Player 0:hobe: Did 12 Loads and dropped 319 Logs and you gained 3 Woodcutting Levels!
===================================================
======= Don't forget to Rep++ if you like ;) ======
===================================================
==============NO PROGGY'S NO UPDATES!=============
===================================================

[BUG]
The

Chopping Tree Using Right Click

doesn't cut the tree, it right clicks the oak and the option to chop comes up but it does not click the chop button, it just moves on. I do not know if this is meant to happen or if it's from the recent update or what ever but I though you might like to know.

[SUGGESTIONS]
I have a few though they are not necessary and possibly not possible.

1. I tried again though I started with 6 logs already in my pack (I then left it for 30 mins as I had to go quickly). I came back to find it had a full pack and the script was still trying to cut trees and did not recognize that the pack was full.

2. Not sure if it already does this or if this is not possible but: allowing the script to turn the view to attempt to find a tree that is not in full view at the default view before turning back. and/or allowing the player to move around (in a small area) to look for the tree specified.

But all in all,
a wonderful script :D

~Caotom

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 5 Hours, 26 Minutes and 3 Seconds
||===== Player 0:chop: Did 538 Loads and dropped 12968 Logs and you gained 0 Woodcutting Levels!
===================================================



works well with 99 wc

Everything was working, but for some reason it got stuck
and kept clicking on my equipment tab over and over.
Not really sure what I did wrong.

Worked awsome

Time Running : 3 Hours, 10 Minutes and 30 Seconds
||===== Player 0:with: Did 52 Loads and dropped 1456 Logs and you gained 0 Woodcutting Levels!

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 1 Hours, 50 Minutes and 16 Seconds
||===== Player 0:this: Did 15 Loads and dropped 414 Logs and you gained 0 Woodcutting Levels!
===================================================

Cutting willows in draynor, works well :D

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 10 Minutes and 12 Seconds
||===== Player 0:this: Did 17 Loads and dropped 471 Logs and you gained 0 Woodcutting Levels!
================================================== =

i got it running ill post a proggy after a 2 hr run or so i looked at it running and only thing thats a little slow is the drop logs it takes like 4 seconds per log and sometimes it doesnt even drop them just goes to the next log and drops it but he keeps chopping so thats not a problem

i would have posted a proggy by now but my computer crashed when i left it running so i dont know what happened

for me it say gametab: tab 2 incorrect

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 6 Hours, 11 Minutes and 3 Seconds
||===== Player 0:ear: Did 75 Loads and dropped 2100 Logs and you gained 0 Woodcutting Levels!
===================================================

found myself in frog random, adjusting camera :) was there probably about half an hour. oh yeh, i increased dropping speed - normally would've been a lot less loads .

thanks alot for script, i love it!
adunrs

i also was getting error about gametab 2 then it said was switching users and stopped.

Testing that in no time.

this works nicely welldone:D

From: voot
i also was getting error about gametab 2 then it said was switching users and stopped.

From: dRez
Testing that in no time.

From: georgeh
this works nicely welldone:D

Nice spams. How strange is it that you stopped at 10 posts?

Awesome,
==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 50 Minutes and 16 Seconds
||===== Player 0:this: Did 25 Loads and dropped 700 Logs and you gained 1 Woodcutting Levels!
================================================== =

Thanks a lot.
Would you be able to send me a guide on how you made this script. I dont want to be one of those "leechers"

Thanks,

JoshsPC

Looks great; I'll give it a run through.

From: JoshsPC
Awesome,
==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 2 Hours, 50 Minutes and 16 Seconds
||===== Player 0:this: Did 25 Loads and dropped 700 Logs and you gained 1 Woodcutting Levels!
================================================== =

Thanks a lot.
Would you be able to send me a guide on how you made this script. I dont want to be one of those "leechers"

Thanks,

JoshsPC

When I have the time I will walk you through it, I'm just too busy. I STILL need to revamp it lol.

~Camo

Right before it starts I have a pop up from scar "I:\Documents and Settings\ME\Desktop\SRL Log 13-10-09 0.txt
SCAR has detected that script is trying to connect to-
http://scarprogressreports.net76.net/add.php ?POST
and I click always permit for this site but the damn thing pops up after each load.

Dear Admin/Mod,

Can you please lock this thread until it's updated?

Thank you,
~Camo

Sorry for double post, but the script has been updated :)

~Camo

when i just start it my mouse goes everywhere and click everywhere, before this there was like a versioncheck, when i was pressing run then it always said that my version is not the good one, but i got the 2,0 so i removed this procedure, then it just do nothing but moving mouse and clicking where it should not :/

hi
i ran it and it just clicked in one spot again and again until closed.
something i've done wrong or just not working yet?

Hey.

Thanks for the great script. :]
It would be nice if it banked the logs(if you where in draynor or something) but i understand that scripts with banking are not posted in the free section. :[

It is good to just read a book and look over at the screen every paragraph to bank logs though.

I keep closing scar before getting the progress report but here is one i just got.

¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ AnyTreePowerCutter! By Camo Developer ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Loads Done: 7! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Logs Dropped: 189! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Total Xp Gained: 12757.5! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Estimated Xp/Hr: 15589! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Time Running: 49 Minutes and 6 Seconds! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ Players Report ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤ Player 0:****: Did 7 Loads, Dropped 189 Logs and Gained 0 Woodcutting Levels!
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ NO PROGGY'S NO UPDATES! ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤

E: Oh and i was using the SMART version, i had no problems with the script.

I can't seem to get it to find a tree lol…
I might be doing something wrong haven't used scar in a long time.

From: x_²
I can't seem to get it to find a tree lol…
I might be doing something wrong haven't used scar in a long time.

Use this one. It's 100% working and the setup is well explained.

Are you sure you're selecting the client if you're not using Smart? I've been running it since last night and it's running fine. And yes, Coh3n's script is better than mine :( But he's a better scripter so I'd hope so lol :p

~Camo

From: Camo Developer
Are you sure you're selecting the client if you're not using Smart? I've been running it since last night and it's running fine. And yes, Coh3n's script is better than mine :( But he's a better scripter so I'd hope so lol :p

~Camo

Hey i think this is a perfectly written script, very glad you took the time on it and it works well.

Ok got it to work. I decided to look at the script lol turns out trees are "normal"
and i had "tree"
So it worked and so far i got 15 wc I'll post a report after i let it run with out stopping it.

From: x_²
Ok got it to work. I decided to look at the script lol turns out trees are "normal"
and i had "tree"
So it worked and so far i got 15 wc I'll post a report after i let it run with out stopping it.

Yeah I know, I'm testing V2.1 right now. It's a lot more updated and changes normal to tree. It's going good right now, should update it in a few hours.

~Camo

Awsome, also am i right in guessing that there are no yew chopping scripts in free for all or will you be adding it in?

EDIT: Here is a Proggy i just did over night.


¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ AnyTreePowerCutter! By Camo Developer ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Loads Done: 49! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Logs Dropped: 1323! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Total Xp Gained: 89302.5! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Estimated Xp/Hr: 22063! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Time Running: 4 Hours, 2 Minutes and 51 Seconds! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ Players Report ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤ Player 0:****: Did 49 Loads, Dropped 1323 Logs and Gained 1 Woodcutting Levels!
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ NO PROGGY'S NO UPDATES! ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤

it seems to get stuck in randoms easily, is there a way to add in the proggy if it went through a random?
Also Levels gained doesnt always work and ive seen it show my total woodcutting level heh.

Awesome! Thanks for using :D V2.1 will have Yews for powerchopping. And I guess I could add that to the report, shouldn't be hard.

~Camo

Looks impressive, I'll try it out.

is there a banker in it?

It's a powerchopper so no, this script doesn't bank. You'll find them in the Jr. Members section once you've been here a week and have 10 NON SPAM posts.

~Camo

¤¤¤¤¤¤¤¤ Loads Done: 118! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Logs Dropped: 3304! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Total Xp Gained: 223020! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Estimated Xp/Hr: 35334! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Time Running: 6 Hours, 18 Minutes and 42 Seconds! ¤¤¤¤¤¤¤¤¤

i keep getting this error: Line 96: [Error] (98:187): Invalid number of parameters in script im new to this stuff so i need help:(

Thank You Trying it rite now

Its very good for me.
Havent got any logs that i can copy+paste in yet, but usually, doesn't give me the 'how much exp gained' one. Not the biggest of deals, but love the script.

Works great. Better then camos too :P. One thing. Sometimes it just gets stuck in randoms =\, rotating the camera around.

From: Baba mhillo
Works great. Better then camos too :P. One thing. Sometimes it just gets stuck in randoms =\, rotating the camera around.

Please pm your accounts to srl devs (those accounts which are stuck in randoms) so they can make the solvers better.

But I am Camo? Lol what? I'm *still* working on a newer version, just busy with class and shit.

~Camo

I need help with script please. It runs fine, and it seems to be clicking, it just won't click on the trees, only puts mouse over them and then keeps switching from tree to tree. Any idea what the problem might be? :confused:

From: Camo Developer
But I am Camo? Lol what? I'm *still* working on a newer version, just busy with class and shit.

~Camo

This, DrWu.

And it's been two months since he said that. ;)

Ah. Do you know of any good woodcutter scripts I could use that don't need SMART, because it doesn't work as well as regular ones for me.

Coh3n's. :) To remove SMART from a script, just find the {.include SRL/SRL/misc/SMART.scar} and add '//' before it, to comment it out. But try not to post here anymore, and instead post on Coh3n's threads or PM me if you've any problems.

Draynor Chop n' Bank
Anywhere PowerChopper

is there anychance that you could make this cut ivy aswell, since it is the fastest wc xp in the game, also you wouldn't have to make it drop anything

heres my proggie!!

¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ AnyTreePowerCutter! By Camo Developer ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Loads Done: 98! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Logs Dropped: 2744! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Total Xp Gained: 0! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Estimated Xp/Hr: 0! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Time Running: 5 Hours, 9 Minutes and 41 Seconds! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ Players Report ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤ Player 0:dros: Did 98 Loads, Dropped 2744 Logs and Gained 0 Woodcutting Levels!
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ NO PROGGY'S NO UPDATES! ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤

here's my proggy best so far
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ AnyTreePowerCutter! By Camo Developer ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Loads Done: 80! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Logs Dropped: 2240! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Total Xp Gained: 0! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Estimated Xp/Hr: 0! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤ Time Running: 4 Hours, 10 Minutes and 1 Seconds! ¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ Players Report ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤ Player 0:dros: Did 80 Loads, Dropped 2240 Logs and Gained -92 Woodcutting Levels!
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤ NO PROGGY'S NO UPDATES! ¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤

try not to double post, click edit and just add the proggy to the post you have done before.

-Sgt Soul-

o_o wow the scripts been used that Long? gonna try this one out :drool:
[BANANA]testing[/BANANA]