SRL Archive - OSR Outdated / Broken Scripts

This is for use with the SRL-OSR include, not P07Include.
Go to https://github.com/SRL/SRL-OSR to download and contribute towards the include!

Code is as follows, no antileech. For me, knowing how to install the include is good enough replacement for antileech. You'll probably need the 07 fonts as well, not going to tell you where to get them. (Hint: Check up on old SRL 4 include, and rename the font folders!)
You can find a tutorial on installation for SRL-OSR here: http://villavu.com/forum/showthread.php?t=100543

NOTE: THERE HAVE BEEN REPORTS OF BANS FROM PEOPLE THAT HAVE USED THIS SCRIPT! WHILE WE CANNOT BE SURE THIS SCRIPT CAUSED THOSE BANS, THERE IS NO ANTIBAN INCLUDED AND MANY PEOPLE HAVE BEEN RUNNING IT FOR LONG PERIODS OF TIME! I PERSONALLY DO NOT RECOMMEND RUNNING THIS SCRIPT FOR VERY LONG!

Some credits go to mx1000 for cave detection base code.

program FightCaveTrainer;

{$DEFINE SMART}
{$i SRL-OSR/Srl.simba}

Const
  caveTol = 2;
  version = '0.6';

Var
  counter, caveEntrances: Integer;
  caveEntranceWhite: TIntegerArray;

Procedure DeclarePlayers;
Begin
  HowManyPlayers := 1;
  NumberOfPlayers(HowManyPlayers);
  CurrentPlayer := 0;

  Players[0].Name := '';
  Players[0].Pass := '';
  Players[0].Nick := '';
  Players[0].Active := True;
End;

Function FightCaveSleep(sleepx, sleepy: Integer; retaliate: Boolean): Boolean;
Var
  x , y, sleepTime: Integer;
  loop : Boolean;
Begin
  loop := true;
  counter := 0;
  sleepTime := RandomRange(sleepx, sleepy);
  While loop Do
  Begin
    If FindObjCustom(x, y, [' '], caveEntranceWhite, caveTol) Then
    Begin
      Result := false;
      loop := false;
      WriteLn('We see cave entrance!');
    End Else If (not (InRange(Length(GetFightBarTPA(IntToBox(MSX1, MSY1, MSX2, MSY2))), 30, 150))) and (retaliate) Then
    Begin
      Result := false;
      loop := false;
    End Else If (sleepTime - counter > 0) and loop = true Then
    Begin
      wait(10);
      counter := (counter + 10);
    End Else
    Begin
      Result := True;
      loop := False;
    End;
  End;
End;

Procedure FightCaveLoop;
Var
  x, y : Integer;
Begin
    If FindObjCustom(x, y, ['nter'], caveEntranceWhite, caveTol) Then
    Begin
      WriteLn('Found correct cave!');
      ClickMouse2(True);
      While FindObjCustom(x, y, ['nter'], caveEntranceWhite, caveTol) Do
      Begin
        ClickMouse2(true);
        Wait(RandomRange(500, 1000));
      End;
      If RandomRange(1, 10) > 8 Then
      Begin
        SetRun(true);
        GameTab(tab_Stats);
      End;
      caveEntrances := (caveEntrances + 1);
      WriteLn('Entered cave.');
      ClearDebug;

      WriteLn('-*         FightCaveTrainer v'+version);
      WriteLn('-*         ');
      WriteLn('-*         Entered: ' + intToStr(caveEntrances));
      WriteLn('-*         Runtime: ' + TimeRunning);

      Wait(RandomRange(4000, 5000));
      SetAngle(0);
    End Else
    If (Not FindObjCustom(x, y, ['nter'], caveEntranceWhite, caveTol)) and (CountDots('yellow') > 0) Then
    Begin
      FightCaveSleep(200,500,False);
      If InRange(Length(GetFightBarTPA(IntToBox(MSX1, MSY1, MSX2, MSY2))), 30, 150) Then
      Begin
        If (FightCaveSleep(3000,5000,True)) Then
        Begin
          If InRange(Length(GetFightBarTPA(IntToBox(MSX1, MSY1, MSX2, MSY2))), 30, 150) Then
          Begin
            Retaliate(False);
            Wait(RandomRange(500,700));
            Retaliate(True);
            GameTab(tab_Stats);
            FightCaveSleep(3000,5000,False);
          End;
        End;
      End;
    End Else MakeCompass(185);
End;

Begin
  SetupSRL;
  DeclarePlayers;
  SetRun(True);
  GameTab(tab_Stats);
  caveEntranceWhite := [7763583, 8553356];
  MouseSpeed := 15;

  While(True) Do
  Begin
    If not LoggedIn Then
    Begin
      LogInPlayer;
      SetRun(True);
      GameTab(tab_Stats);
      MakeCompass(185);
      SetAngle(0);
    End;
    FightCaveLoop;
  End;
End.

This is a ripped version of RareFightCave, please remove this.

From: Im fkn rare
This is a ripped version of RareFightCave, please remove this.

Ripped? It's heavily modified. Not only that, but you used mx1000's fight caver for your base as well…

EDIT: This in fact does not use any of your code at all, the functions I used from your caver are originally mx1000's to begin with. And I modified his script a whole lot more than you did.
For the record, all you did was add a small progress report, an additional color to the cave colors array, changed some wait times, and removed his useless "WriteLn" status updates.

This script has a completely redone fight detection + somewhat advanced auto retaliate toggle instead of right clicking to attack, I removed useless function that basically uses another function for it's result, cleaned up everything, and rewrote it for use with the (going to be official) SRL-OSR include.

For you to say this is a ripped version of your script is completely laughable, and insulting. Get the hell out.

For anyone wishing to take a look, RareFightCave vs mxFightCave: http://dl.dropbox.com/u/32529420/comparison.htm

Get outta here skiddo.

From: Im fkn rare
Get outta here skiddo.

Can't tell if troll or just stupid.

OP is correct. The similarities your scripts share both originate from mx1000's script and he has already credited him as such.

Ok i guess am the only person that actually tried to run this script?
Since you offered no input what so ever, i am going to assume you gave up on this thread and probably won't even read this message.

Anyway, went to this link, http://villavu.com/forum/showthread.php?t=98324 grabbed OSR-SRL and the fonts.


Your script didn't work.

Error:

function DeleteOnTerminate(const proc : string) : boolean;
[Error] E:\Simba\Includes\SRL-OSR/SRL/core/simba.simba(465:14): Unknown identifier '' at line 464
Compiling failed.

So it didn't work.

From: samerdl
Ok i guess am the only person that actually tried to run this script?
Since you offered no input what so ever, i am going to assume you gave up on this thread and probably won't even read this message.

Anyway, went to this link, http://villavu.com/forum/showthread.php?t=98324 grabbed OSR-SRL and the fonts.


Your script didn't work.

Error:

function DeleteOnTerminate(const proc : string) : boolean;
[Error] E:\Simba\Includes\SRL-OSR/SRL/core/simba.simba(465:14): Unknown identifier '' at line 464
Compiling failed.

So it didn't work.

SRL-OSR isn't technically ready yet, so you may have downloaded a bad version. Would probably be best to wait a day or two and download it again, see if the problem fixes itself.

dat flawlessness

-* FightCaveTrainer v0.6
-*
-* Entered: 105
-* Runtime: 5 Hours, 58 Minutes and 27 Seconds
We see cave entrance!

From: SeanStar
SRL-OSR isn't technically ready yet, so you may have downloaded a bad version. Would probably be best to wait a day or two and download it again, see if the problem fixes itself.

Yeah but i didn't find any actual thread about SRL-OSR, just that github with little information/explanations, am not expecting you to post any information so…

is "SRL-OSR" out i cant find the thread to it unless someone wants to link me.

From: kidnappings
is "SRL-OSR" out i cant find the thread to it unless someone wants to link me.

There is no thread as it isn't really released yet. It's on github still being worked on for release (although it works for the most part)

In other news…

-* FightCaveTrainer v0.6
-*
-* Entered: 721
-* Runtime: 49 Hours, 26 Minutes and 58 Seconds

Which download am I downloading from this file?

-* FightCaveTrainer v0.6
-*
-* Entered: 205
-* Runtime: 6 Hours, 36 Minutes and 16 Seconds

Holy crap, this script is literally flawless. Great job! I'm gonna leave it on while I go to work and see if it's still running when I get back. That should put it at ~18 hours runtime. :P

Didn't really check specific onto what changes you amended to the script, but its working now =)

Just one little thing, when i run it - it works but on the simba panel below the script input, it keeps repeating the message
"We see cave entrance!" until it dies, this occurs once the script enters the cave - when it triple clicks it it doesn't show that message, once i enter and start walking north automatically, simba relays the message repeatedly "We see cave entrance!".

Good script overall, i switch between this one and others just to mix my gameplay thank you sir! now all we need is a prayer working cave script :0

From: samerdl
Didn't really check specific onto what changes you amended to the script, but its working now =)

Just one little thing, when i run it - it works but on the simba panel below the script input, it keeps repeating the message
"We see cave entrance!" until it dies, this occurs once the script enters the cave - when it triple clicks it it doesn't show that message, once i enter and start walking north automatically, simba relays the message repeatedly "We see cave entrance!".

Good script overall, i switch between this one and others just to mix my gameplay thank you sir! now all we need is a prayer working cave script :0

Don't wear anything white. Including white hair.

From: SeanStar
Don't wear anything white. Including white hair.

ah i was using desert boots = white, gotcha

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/text.simba(805:13): Unknown identifier 'UpChars07' at line 804
Compiling failed.

Currently using this script. Very simple, I think I'm going to add in a bit of camera rotation or something because it seems a little to bland without searching for anything or just looking like someones bored etc. Thanks for creating this script :)

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

is this anti-leech?

One of the most flawless scripts I have ever used on Old School RS! Exceptional work. For those having problems, re download SRL-OSR re extract everything, thats what I did and all my scripts work flawlessly now.

Does this support range?

From: huxley19
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

is this anti-leech?

Redownload SRL-OSR, you probably downloaded an older version that was bugged. Try it after you extract the new version.

From: fluffycluffy
Redownload SRL-OSR, you probably downloaded an older version that was bugged. Try it after you extract the new version.

Implying he even had it downloaded at all and in the right spot. :P

From: SeanStar
Implying he even had it downloaded at all and in the right spot. :P

Very true, nice script btw.

Does it support range? Haven't tried range yet, but from what I've read in the code, it looks like it should.

From: fluffycluffy
Very true, nice script btw.

Does it support range? Haven't tried range yet, but from what I've read in the code, it looks like it should.

Yes it does, but it won't pick up ammunition used.

To those having errors.

Make sure you have downloaded and installed the newest version of SRL-OSR.
https://github.com/SRL/SRL-OSR

Make sure you have also downloaded and installed 07 Fonts.
http://villavu.com/forum/attachment.php?attachmentid=19822&d=1362900038


Enjoy this amazing script :)

I'll be using this while I take a quick nap ;)

Im having a problem where sometimes the mobs get stuck behind italy rock and my char will just stand there doing nothing. Im guessing it's because my character runs to the rangers to attack them with auto retaliate. Even tried to turn auto retaliate off but the script puts it back on.

From: shebee
Im having a problem where sometimes the mobs get stuck behind italy rock and my char will just stand there doing nothing.

If your char happens to time out when this happens, it will login again outside the cave and continue without a hitch.

From: SeanStar
If your char happens to time out when this happens, it will login again outside the cave and continue without a hitch.

ok thats very good

-* FightCaveTrainer v0.6
-*
-* Entered: 131
-* Runtime: 5 Hours, 4 Minutes and 44 Seconds

Flawless - its been running several hours longer, but I had to restart my computer :P

So, It gives me the we see cave entrance a bunch of times because I'm wearing a glory. Doesn't really break the script though.

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''
can u plz tell me where to put the files i downloaded from github that would help alot

From: rara409
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''
can u plz tell me where to put the files i downloaded from github that would help alot

Download the Github zip, extract to Includes folder.

-*         FightCaveTrainer v0.6
-*         
-*         Entered: 335
-*         Runtime: 9 Hours, 37 Minutes and 5 Seconds

Still running, thank you for this :D

still dont work

i get the same error as before i downloaded the zip folder and then moved it into the simba includes folder

[Error] C:\Simba\SRL-OSR\SRL\core\text.simba(454:34): Invalid number of parameters at line 453
Compiling failed.

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

You need to install the old school SRL include manually as well as the fonts.

Hey, could you please tell me where to install the fonts? I installed them in the fonts folder in C:/Somba/Fonts but it still doesn't seem to recognize it and gives me:
"[Error] C:\Simba\Includes\SRL-OSR/SRL/core/text.simba(805:13): Unknown identifier 'UpChars07' at line 804
Compiling failed." in the text.simba script."
Thanks,
Ben

Lol some people.. The https://github.com/SRL/SRL-OSR link sends you to the sharing AND downloading website.
DL, and extract to simba/include
the DL the fonts <—- there.
Extract into fonts folder.
BAM update/restart simba and you're done.

Nice bot :) Thanks

What range levels are you guys at now?

Extremely good script, the only trouble I had was that occasionally the bot thought that I had logged out and type my username and password into the chat box (this is what i believe was the reason for me getting hacked). Anyway if i use it without entering my username and password it works like a dream!

-I'm a massive noob and forgot to turn off public

also its a "bot" for the fight cave minigame? and its train for me str/atk etc.
btw;
[Error] C:\Simba\Includes\SRL-OSR/SRL/core/text.simba(805:13): Unknown identifier 'UpChars07' at line 804
Compiling failed.

just downloaded SRL-OSR still wont work.

From: scarf
also its a "bot" for the fight cave minigame? and its train for me str/atk etc.
btw;
[Error] C:\Simba\Includes\SRL-OSR/SRL/core/text.simba(805:13): Unknown identifier 'UpChars07' at line 804
Compiling failed.

just downloaded SRL-OSR still wont work.

You need to download the SLR-OSR Fonts!

C:\Simba\Includes\SRL-OSR/SRL/core/text.simba(805:13): Unknown identifier 'UpChars07' at line 804
Compiling failed.

ok so can someone plz just post the fonts link instead of just stating that we need to download the fonts thx appreciate it

C:\Simba\Includes\SRL-OSR\SRL\core\text.simba(454:34): Invalid number of parameters at line 453
Compiling failed.

From: rara409
C:\Simba\Includes\SRL-OSR/SRL/core/text.simba(805:13): Unknown identifier 'UpChars07' at line 804
Compiling failed.

ok so can someone plz just post the fonts link instead of just stating that we need to download the fonts thx appreciate it

Its all here:

http://villavu.com/forum/showthread.php?t=96863

Is that what you were looking for?

http://gyazo.com/a2efc8e04b727096df99c51120ee4a82
Installed and extracted SRL-OSR into includes and still getting Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from 'C:\Simba\Scripts\FightCave2.simba'

For OP:
I had some issues where it would just safespot the monsters sometimes.
They sometimes spawn in a certain order where a ranged mob will pull me to a corner and the next wave spawns behind a wall. It would time out but the script would just do nothing.
Does that pretty often also..

I ended up writing my own script completely but I worked around the problem by making the script walk east if I'm not in the cave and have been out of combat for 35 seconds or more.

From: Accelero
http://gyazo.com/a2efc8e04b727096df99c51120ee4a82
Installed and extracted SRL-OSR into includes and still getting Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from 'C:\Simba\Scripts\FightCave2.simba'

You need to rename the folder… Jesus can you at least read the errors.

Can you please assist me instead of being a jerk about it? What exactly do i have to rename, i cannot rename a folder to SRL-OSR/Srl.Simba, it does not allow me to

From: shebee
For OP:
I had some issues where it would just safespot the monsters sometimes.
They sometimes spawn in a certain order where a ranged mob will pull me to a corner and the next wave spawns behind a wall. It would time out but the script would just do nothing.
Does that pretty often also..

I ended up writing my own script completely but I worked around the problem by making the script walk east if I'm not in the cave and have been out of combat for 35 seconds or more.



You need to rename the folder… Jesus can you at least read the errors.

From: Accelero
Can you please assist me instead of being a jerk about it? What exactly do i have to rename, i cannot rename a folder to SRL-OSR/Srl.Simba, it does not allow me to

You probably downloaded the zip from github and extracted it.
The error says it can't find SRL.simba in the folder SRL-OSR because it most likely doesn't exist, check the name of the folder you extracted.

Instead of just going into the .zip and dragging the Master folder into my includes, what should i do instead.

From: shebee
You probably downloaded the zip from github and extracted it.
The error says it can't find SRL.simba in the folder SRL-OSR because it most likely doesn't exist, check the name of the folder you extracted.

The folder you extracted is probably named SRL-OSR-master or something, am I correct?
If so then read the error message and if you still can't figure it out man :D I'll help you but try to figure it out yourself ;)

yes that is what it is called! I just don't want to start trying things and mess up my whole simba which i've already managed to do yesterday. Just helpo me please:D I promise i'm no noob, i got all the way here i just need the push!:biggrin:

From: shebee
The folder you extracted is probably named SRL-OSR-master or something, am I correct?
If so then read the error message and if you still can't figure it out man :D I'll help you but try to figure it out yourself ;)

You should start playing around, install simba twice for example and mess around in the other one.
If you just read about this stuff and ask others you will never be able to fix these things by yourself, and the truth is these things aren't hard to fix you just have to get into it.

Anyway, just rename folder to SRL-OSR.

WOW It was just that simple. Thanks man i appreciate the guidance and help!

From: shebee
You should start playing around, install simba twice for example and mess around in the other one.
If you just read about this stuff and ask others you will never be able to fix these things by yourself, and the truth is these things aren't hard to fix you just have to get into it.

Anyway, just rename folder to SRL-OSR.

What is the requirment for training in fight cave? i have a crap account i wana bot on its 30 attk 30 str 10 hp (only done waterfall quest) will it be useless to bot it in fight cave?

The lowest level mobs are 22 I think, but it gets pretty hard fast.
My lvl 80+ character with very good gear survives in there for about 5 minutes, melee that is.

I think it would be very slow xp in the beginning.. You're better off using another script or just get the stats higher yourself to around 40-50+ I'd say.

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/text.simba(805:24): Unknown identifier 'CharsNPC07' at line 804
Compiling failed.

I properly downloaded the OSR include, and fonts, and have set up simba to work correctly on many other scripts. However, when i run this one, it says :

begin
  Text := Replace(Text, '?', '.');
  Result := ExecRegExpr('.*'+Text+'.*', GetUpText);
end;  

At the second line (text), it says in the Debug box "Invalid number of parameters at line 453" (text line)

not sure what i should do here, I see other people with the error here also.
Thanks :)

I feel very silly, but i can not figure out this error for the life of me. Could someone please help?

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

From: rara409
[Error] C:\Simba\Includes\SRL-OSR/SRL/core/text.simba(805:24): Unknown identifier 'CharsNPC07' at line 804
Compiling failed.

extract all of the new fonts into the fonts folder in the simba folder.
It should be in something like this: Computer/OS(C:)/Simba/Fonts

Seriously, can someone help me out? I can't seem to find out what i did wrong. I have everythig extracted to the correct areas, i can't seem to figure out this error.
I feel very silly, but i can not figure out this error for the life of me. Could someone please help?

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

aaazv

From: Pcheckan
Seriously, can someone help me out? I can't seem to find out what i did wrong. I have everythig extracted to the correct areas, i can't seem to figure out this error.
I feel very silly, but i can not figure out this error for the life of me. Could someone please help?

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

I think the flag include is not complete yet, but this script doesn' use it anyway.

From: thefatgiant
Great script, but man the fight caves is extremely slow exp.

Also, the colors might need to be slightly reworked. The script seemed to think the handle of my dragon scim was the same color as the cave entrance, thus spammed the message "We see the cave entrance"

I needed to tweek the cave color numbers, the camera angle, as well as a few other minor adjustments to make this a perfect script.

Also, what is the point of turning retaliate on and off throughout the script (which I ended up removing alltogether)

I get around 20k xp/h with my own script with 66/70/60 (att/str/def), but my script takes 15-30min breaks every now and then.
Also you get around 13-20k gp/h if you compare the tokkuls to onyx price.

From: shebee
I think the flag include is not complete yet, but this script doesn' use it anyway.



I get around 20k xp/h with my own script with 66/70/60 (att/str/def), but my script takes 15-30min breaks every now and then.
Also you get around 13-20k gp/h if you compare the tokkuls to onyx price.

Should i comment out that line?
And what are the odds of you letting me try out your private script?

From: Pcheckan
Should i comment out that line?
And what are the odds of you letting me try out your private script?

I think you have messed something up TBH, try downloading the srl include and fonts again plus the script.

From: shebee
I think you have messed something up TBH, try downloading the srl include and fonts again plus the script.

I have tried resinatlling the Osr include
Put in the correct folder "C:/Simba/Includes
I have also installed the fonts correctly "C:/Simba/fonts
I have other scripts working correctly, but nothing with the osr include

From: shebee
I think you have messed something up TBH, try downloading the srl include and fonts again plus the script.

I am an idiot, i reinstalled, i had it pathed wrong.
Testing the script now! :P

From: Pcheckan
I am an idiot, i reinstalled, i had it pathed wrong.
Testing the script now! :P

I hope it works.

took me like three hours to get srl-osr to work :duh: but yeah working so far :P

Hey , great script overall.Although i think it can be a bit improved by adding prayer option , spec option etc.I will be personally modding mine to allow me to do that.But again awesome script and thanks

Awesome work. :)

-* FightCaveTrainer v0.6
-*
-* Entered: 599
-* Runtime: 17 Hours, 35 Minutes and 8 Seconds

When I run the script it doesn't do anything after clicking on the stats tab and rotating the camera angle once, I don't get any errors either?

I have 40 att 32 str 1 def 29 hp, how long will I last inside?

My friend just got banned from this two hours ago. Well, I guess it's time for me to stop lmfao! Got 80 strength from this, time to say goodbye to the flawless bot :( I actually didn't think Jagex would do anything… I guess too many people are doing this.

Exception in Script: Plugin(libsmartremote32) has not been found

You should add an option for it to use special.

awesome script Ill post a proggy later, funny how empty fightcaves is atm because wbot is down

From: Pcheckan
extract all of the new fonts into the fonts folder in the simba folder.
It should be in something like this: Computer/OS(C:)/Simba/Fonts

but where are the new fonts :(

Everything you need is in this thread. Just go through the pages wasn't that hard

From: binopeda
Everything you need is in this thread. Just go through the pages wasn't that hard

i have for like 2 hours lol i went thru the guide to install twice now. did all the steps again, can you just tell me what to do

Can somebody please help. I want to get this up before I sleep.

Edit - Now I updated all the plugins, enabled all extensions, etc. on the tabs, and I got this error at first 'Error in Simba extension (SPS Updater): Could not call proc
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228 Compiling failed', then this '[Error] C:\Simba\Includes\SRL-OSR\SRL\misc\SmartParams.Simba(35:7): Unknown identifier 'Smart_World' at line 34
Compiling failed.'

From: Huthaifah
Can somebody please help. I want to get this up before I sleep.

Edit - Now I updated all the plugins, enabled all extensions, etc. on the tabs, and I got this error at first 'Error in Simba extension (SPS Updater): Could not call proc
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228 Compiling failed', then this '[Error] C:\Simba\Includes\SRL-OSR\SRL\misc\SmartParams.Simba(35:7): Unknown identifier 'Smart_World' at line 34
Compiling failed.'

Install SMART8.

From: shebee
Install SMART8.

I just realized that I didn't have it. Sorry for being stupid, thanks, working now.

From: Hammerdin
My friend just got banned from this two hours ago..

He's trolling you

From: Dreadzone
He's trolling you

Also find this hard to believe, been botting pretty much 24/7 there, though not with this script…

Hey guys I'm fairly new to Simba, but I'm very interested in learning it.

I unfortunately can't manage to run your script as I get the following error:

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/simba.simba(465:14): Unknown identifier '' at line 464
Compiling failed.
[Error] C:\Simba\Includes\SRL-OSR\SRL\core\simba.simba(490:14): Unknown identifier '' at line 489
Compiling failed.

I've installed Smart8, SRL-OSR & 07Fonts in their respective folders (Includes & Fonts). Although I deleted the old SLR & old fonts (don't know if this is necessary).

Could I get some guidance please? Thanks




NVM guys, I simply reinstalled everything from scratch and didnt bother deleting old SLR / Fonts, this time and it worked, TYVM!

From: shebee
Also find this hard to believe, been botting pretty much 24/7 there, though not with this script…

Yup.. see this as a simulation to a real person sitting behind the computer. AFKing in a minigame with auto retaliate on, is NOT against the rules.

Running now, thanks

cant get this to work.. will post error screen shot ina minute

-* Entered: 158
-* Runtime: 12 Hours, 8 Minutes and 56 Seconds

i like it :)

I have everything up and running.. downloaded all the necessary stuff.
Idk what happened here, Anyone can give me some guidance to what I need to do to fix this?

Compiled successfully in 359 ms.
SRL Compiled in 0 msec
** Smart Cannot Spawn Clients **
Successfully executed.

I can get it to work but then it doesn't use smart

-* FightCaveTrainer v0.6
-*
-* Entered: 274
-* Runtime: 5 Hours, 53 Minutes and 47 Seconds

Flawless thank you, would of went even longer, but RS updated.

Edit - One thing that would help, if it didn't double click the cave all the time to enter.

Edit 2 - This thing got me 34 Str - 50 Str in 9 hours of work total.

are my chances of getting a ban lowered if i go into an empty world?

Not necessarily, just change the world your in when Smart loads, because the world Smart loads is the same all the time, so they can see that your been playing for a long time and haven't even changed worlds yet. And that every time you log in, it's that same world.

I know I'm doing something wrong, but I just don't know what. I've read the whole thread, downloaded the SRL-OSR and fonts. Placed them both in the appropriate folder. But when the script starts it turns auto retaliate on and just sits at the entrance to the cave. I first thought it was because RS just updated but everyone else seems to be running this fine.

From: lemon tree
I know I'm doing something wrong, but I just don't know what. I've read the whole thread, downloaded the SRL-OSR and fonts. Placed them both in the appropriate folder. But when the script starts it turns auto retaliate on and just sits at the entrance to the cave. I first thought it was because RS just updated but everyone else seems to be running this fine.

Use your color picker on the cave entrance and replace the existing ones caveEntranceWhite := [7763583, 8553356];

-* FightCaveTrainer v0.6
-*
-* Entered: 312
-* Runtime: 11 Hours, 33 Minutes and 31 Seconds

i get this error:

C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(282:145): Invalid number of parameters at line 281

-* FightCaveTrainer v0.6
-*
-* Entered: 706
-* Runtime: 17 Hours, 42 Minutes and 46 Seconds

Other than the close to 6 hours one that I posted which stopped because of update and it's still going. At 60 strength :). Going to mix up game play though, wc and fletch a bit then use this for 60 range. Thanks. 1 Suggestion though, have the bot kind of move the mouse around because it sticks to just one spot and stays there.

Is it possible for 1def pures to use this, and where do we start the script?

Edit: works great gj :)

-* FightCaveTrainer v0.6
-*
-* Entered: 148
-* Runtime: 10 Hours, 8 Minutes and 13 Seconds
Successfully executed.


flawless! and there are no randoms in fight caves, so it goes uninterrupted! :D just amazing. went from lvl 54-60 str in that time. so that's the average xp/hour if you wanna do math.

From: Kave
Use your color picker on the cave entrance and replace the existing ones caveEntranceWhite := [7763583, 8553356];

Thanks :) . Seems to work fine now. I'll try to get a nice proggy up soon.

God, i'm getting owned here.

I've dl'ed everything. But yet I get this:


Exception in Script: Plugin(libsmartremote32) has not been found

Where can I dl this plugin, am i doing something wrong? I just copy/paste the script onto simba and press run… I know im being an idoit. But my skills are IT are minimum at best.

—————————————

updated plugin now I get:

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.

Fuck my life.

Hmm…I go into the fight caves but it does not target any of the monsters, is it meant to just sit there with auto-retaliate or is it more active?

From: barcacl2006
Hmm…I go into the fight caves but it does not target any of the monsters, is it meant to just sit there with auto-retaliate or is it more active?

Nope that's all there is too it. it enters and you just afk and get free lvls on auto-retaliate. although like stated above, you won't get very good xp unless you have a higher lvl i.e. 40+ since you prolly won't make it past wave 2-4 with low lvl. I'm lvl 65 with rune/addy armor and i make it to about wave 8

-* FightCaveTrainer v0.6
-*
-* Entered: 138
-* Runtime: 13 Hours, 36 Minutes and 24 Seconds

nice script :D entrance time is low because i am a high cb level and i stay in for longer. Ty for this. Love it.
got 40-70 atk, 40-70 str, 1-46 def, 1-56 range, and 1-60 mage :D

From: omoplata
God, i'm getting owned here.

I've dl'ed everything. But yet I get this:


Exception in Script: Plugin(libsmartremote32) has not been found

Where can I dl this plugin, am i doing something wrong? I just copy/paste the script onto simba and press run… I know im being an idoit. But my skills are IT are minimum at best.

—————————————

updated plugin now I get:

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.

Fuck my life.

I got the last error as well. Did you fix it yet?

From: unitedshots
I got the last error as well. Did you fix it yet?

I fixed it, so it loads the bot and logs in, but now it just stands next to the entrance?

From: omoplata
I fixed it, so it loads the bot and logs in, but now it just stands next to the entrance?

That seems troublesome.. How did you fix it?

EDIT: Never mind. Re-installed Simba and followed a few tutorials, now using other script. ;)

My bot logs in aswell but stands and does nothing

Sure is simple compared to some scripts out there, but thats all u really need I guess… if I'd suggst anything I'd have the mouse/screen move a little more. Another idea would be to modify it so it drinks a dose of potion (such as combat pots) each time it goes in. I've done some experiments myself and 1 dose of combat pot each time one enters a cave can give u +10-25% more experience per hour. Some suggest to toggle prayer, however the monsters drain prayer so that is totally pointless. Other than that, awesome work my man, keep Rx'ing!

-* FightCaveTrainer v0.6
-*
-* Entered: 1049
-* Runtime: 27 Hours, 6 Seconds
Successfully executed.

Got me 63 Strength from 34 in 33 hours. Thank you. Gonna use later, just changing gameplay.

From: teddyromz
My bot logs in aswell but stands and does nothing

Make sure you have your brightness at full.

how i download this SRL-OSr thing ?

Still going!

-*         FightCaveTrainer v0.6
-*         
-*         Entered: 687
-*         Runtime: 20 Hours, 40 Minutes and 54 Seconds

-* FightCaveTrainer v0.6
-*
-* Entered: 538
-* Runtime: 17 Hours, 12 Minutes, and 30 Seconds

Thanks!! Great script <3

There is not a working link for the OSR include that I can find… Can someone please provide a working link? Thank you.

-* FightCaveTrainer v0.6
-*
-* Entered: 604
-* Runtime: 15 Hours, 4 Minutes and 33 Seconds
Successfully executed.

On my 1 def acc

Can someone help me with setting up praying ? i know its not hard but i can't find the right script.

Flawless script besides sometimes getting stuck behind a rock because of the rangers.

-* FightCaveTrainer v0.6
-*
-* Entered: 118
-* Runtime: 8 Hours, 40 Minutes and 3 Seconds

Great script. Thanks :)

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(241:157): Invalid number of parameters at line 240
Compiling failed.

help please?

From: btax420
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(241:157): Invalid number of parameters at line 240
Compiling failed.

help please?

try to change

this line
{$DEFINE SMART}
to this
{$DEFINE SMART8}


serch with F + 5

Ran it for 24 hours straight. Got like 18k str xp per hour, flawless script : ) thanks

Every 20 enters or so, I always end up outside the cave with 1-10HP and 0 prayer points. It's happened consistently for the 8+ hours I've ran it. Any ideas?

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

You need to put SRL-ORS in your includes folder

where in https://github.com/SRL/SRL-OSR can i get it?

From: xoy
where in https://github.com/SRL/SRL-OSR can i get it?

Go check the setup videos like everyone else.

Awesome work with the script, ran it whole night and i got 50-56 attack on my pure.

nvm

nvm

nvm got it,..

Nice script. What will you guys be spending your tokkul on?

it keeps spamming we see fight caves entrances.

and then the mouse moves around my character nonstop, kinda botlike.

otherwise it enters fightcaves when killed and depends on auto-retaliate.

any fix on the mouse moving around my character part? brightness is on full, maybe its armour im wearing? idk.

Maybe ill just save for onyx if I don't get banned or anything.

How much is an onyx? I was thinking with current prices shield may have the best tokkul/gp ratio

From: xoy
it keeps spamming we see fight caves entrances.

and then the mouse moves around my character nonstop, kinda botlike.

otherwise it enters fightcaves when killed and depends on auto-retaliate.

any fix on the mouse moving around my character part? brightness is on full, maybe its armour im wearing? idk.

well i fixed this by playing around with the brightness and changing colour of fightcave entrance.

Im paying if somebody could make this script working for me… im bad in simba… paying 07 gp!!!!

Skype: RyGrybFX

Works flawlessly! I got a 24 hr proggy. :)

From: CoinDozer
Im paying if somebody could make this script working for me… im bad in simba… paying 07 gp!!!!

Skype: RyGrybFX

Lol sad, user couldn't fix something himself, i did it for him and he deleted me after he could bot.
Anyway, i expected this , last time i help somebody over here lol. All phags from wBot..

work and thx,but not so good xp , just 10k for hour.

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

What is the problem>

From: fangkevin87
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

What is the problem>

This, i've downloaded it set it into the includes and still got the error.

[ATTACH=CONFIG]20147[/ATTACH]
How do i fixed this problem , after i have clicked run. I have downloaded the right SRL-OSR and put them into the right folder.

From: noobness
This, i've downloaded it set it into the includes and still got the error.

Also i've renamed the folder.

Copied the script, pasted into Simba, flawless running so far. Great script!

Running well so far, glad there's finally a fight cave script that will stay up.

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.
Confused, I downloaded include, extracted to right place and renamed, but it's coming up with this error?
Does this mean there is something wrong with the include or have I messed up?

From: browncat
[ATTACH=CONFIG]20147[/ATTACH]
How do i fixed this problem , after i have clicked run. I have downloaded the right SRL-OSR and put them into the right folder.

I am experiencing the same problem :/

Does anyone know why my smart v 8.0 screen is solid white. I cannot see anything yet the script compiles and loads successfully. I can even hear the audio, but I can only view a white screen.

From: browncat
[ATTACH=CONFIG]20147[/ATTACH]
How do i fixed this problem , after i have clicked run. I have downloaded the right SRL-OSR and put them into the right folder.

i think so that if you have this code line

{$DEFINE SMART}

change to
{$DEFINE SMART8}

just try , I AM NOT SURE

From: sus123
i think so that if you have this code line

{$DEFINE SMART}

change to
{$DEFINE SMART8}

just try , I AM NOT SURE

Tried it, still don't work.
I'm getting the same error as everyone else.

Followed all the guides to set up Simba/Set up Simba for 07, did the danny fix,
Followed this guide to the T http://villavu.com/forum/showthread.php?t=98324

From: alexjones102398
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.
Confused, I downloaded include, extracted to right place and renamed, but it's coming up with this error?
Does this mean there is something wrong with the include or have I messed up?

Installing smart 8 fixed this for me I believe. Also make sure you have successfully replaced the 3 simba files for loading 07 in smart. 99% chance it's one of those.

I did a clean install of simba twice,
Updated all the plugins, ran the code to startup SMART, it loaded up, So I know I have SMART 8
Followed every guide to the T, still am getting this error.

Thank you for this script. But there is still space for improvement; the wbot one got me 5k xp/hr more. No idea how but its a fact, but it also is offline :)

From: browncat
[ATTACH=CONFIG]20147[/ATTACH]
How do i fixed this problem , after i have clicked run. I have downloaded the right SRL-OSR and put them into the right folder.

Try downloading the attached files in this topic: http://villavu.com/forum/showthread.php?t=97599

Place login and globals in the SRL-OSR>SRL>core and the parameters in SRL-OSR>SRL>misc

And you did rename the SRL-OSR file right?

Rename it to 'SRL-OSR' right?

yep

keep getting stuck to the cave entrance..

Edit: installed SMART 8 - it runs now.

Smart 8 usually isn't installed by default; you have to do it yourself.

So funny howmany people ask the same question, just read the thread :google: :duh:

-* FightCaveTrainer v0.6
-*
-* Entered: 62
-* Runtime: 4 Hours, 19 Minutes and 57 Seconds


50-55 strength and 44-48 hp, and still going strong without any error at all!
Incredible script.

-* FightCaveTrainer v0.6
-*
-* Entered: 993
-* Runtime: 38 Hours, 19 Minutes and 54 Seconds
Still running, Flawless bot :D

This script has been running flawlessly for 4 hours. You a sir and a saint. Thank you!

Bugs:
If you're wearing any steel armour/equptment, it'll think the steel equptment/armour is the cave enterance,
So every time I was weilding a steel scimitar, it'd constantly spam 'found cave enterance' and the mouse would hover over the scimitar.
It would still get in though with the scimitar, I don't think it'd go in with the steel armour.

When I was running three bots at once, I noticed a few times it'd click 'auto retaliate off'
Maybe due to lag, but I found one of my bots with relatilate off and it'd just stand there.
Once I closed the third bot, I haven't had this issue with the other two i've been running.

Other than that . . seems pretty damn flawless, could use a bit more anti-ban, but I guess as soon as you die in caves, within about 1 - 3 seconds it's already clicked on the enterance, so you're not outside for very long.

So far, me and my brother have been running this script for the past few hours, seems pretty good.
One of them I stopped halfway to go back to varrock to buy better equptment, so i'll share this one.
-* FightCaveTrainer v0.6
-*
-* Entered: 201
-* Runtime: 3 Hours, 30 Minutes and 58 Seconds

I might look over the code tonight if I have time and see if I can fix it up a bit, but I think it's working pretty well, from what I can tell.

Gonna try to get a few 24 - 48 hr proggies. I'll post more proggies in a few days.

30 - 39 attack,
30 - 35 strength
6 - 23 def

11 - 23 attack,
10 - 16 strength
1 - 13 defense

44-86 str in a month

When I run my script I just get a solid white screen in smart.. I can hear the runescape login audio but like I said, white screen.. help appreciated!

Anyone banned from this yet? :-? I've been using it for a bit but trying to be safe about it. Running it in web browser in a virtual machine so it doesn't use the "SMART" loader thing and so I can still use my mouse.

From: xdustin
Anyone banned from this yet? :-? I've been using it for a bit but trying to be safe about it. Running it in web browser in a virtual machine so it doesn't use the "SMART" loader thing and so I can still use my mouse.

Can you or anyone help me set this up? or link me to this new include setup guide?

Currently using this to train my pure, trying to learn how to check stats once in a while just for a little more antiban.


Will try training a main up too.

I'm getting
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.
[Error] C:\Simba\Includes\SRL-OSR\SRL\misc\SmartParams.Simba(35:7): Unknown identifier 'Smart_World' at line 34
Compiling failed.
Please help

From: Nextacy
I'm getting
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.
[Error] C:\Simba\Includes\SRL-OSR\SRL\misc\SmartParams.Simba(35:7): Unknown identifier 'Smart_World' at line 34
Compiling failed.
Please help

Re-download the include, then try again

-* FightCaveTrainer v0.6
-*
-* Entered: 77
-* Runtime: 6 Hours, 32 Minutes and 4 Seconds

Epic script, got me 27-51 ranged

love the bot thanks mate :)

bot says :

** Smart Cannot Spawn Clients **

my bot starts and just stands there wtf

Where do i enter my username and password, for logging back in after 6 hour timer?

getting this error code. "Exception in Script: Unable to find file 'SRL-OSR\Srl.simba' used from '' any ideas??

From: mauricio
getting this error code. "Exception in Script: Unable to find file 'SRL-OSR\Srl.simba' used from '' any ideas??

Any ideas? Yes, I have an idea. Read the OP.

From: Bloc
Where do i enter my username and password, for logging back in after 6 hour timer?

Bump

Anyway to fix this? http://gyazo.com/7d2695c248db0eb17885112bfd151551

From: Bloc
Where do i enter my username and password, for logging back in after 6 hour timer?

Really? Look at the script it's right in front of you. Line 20 and 21 ask for username and password lol

From: ReeferFromHF
Anyway to fix this? http://gyazo.com/7d2695c248db0eb17885112bfd151551

Read the first post. Download SRL-OSR from Github and save it in your includes folder.

From: kerusia
Really? Look at the script it's right in front of you. Line 20 and 21 ask for username and password lol

I seen that but it asks for nick? whats that? lol

[Error] C:\Simba99\Includes\SRL-OSR\SRL\core\text.simba(454:34): Invalid number of parameters at line 453
Compiling failed.

This is the line: Text := Replace(Text, '?', '.');

I did change the name and extracted it into my includes folder.

From: kerusia
Read the first post. Download SRL-OSR from Github and save it in your includes folder.

I did…. But i think i just had to update SRL. Trying it now.

From: Bloc
I seen that but it asks for nick? whats that? lol

Not sure about what it wants for nick, I left it blank and mine works perfect lol.

Did i do this right? http://gyazo.com/4764897661cd4348e8b725a663ab3629

From: kerusia
Not sure about what it wants for nick, I left it blank and mine works perfect lol.

ok got it thanks, mine is gonna run for like 50+ hours now:p

From: ReeferFromHF
Did i do this right? http://gyazo.com/4764897661cd4348e8b725a663ab3629

You need to change the name of the folder 'SRL-OSR-master' to 'SRL-OSR'. That's why it can't find it, that should fix your problem.

From: kerusia
You need to change the name of the folder 'SRL-OSR-master' to 'SRL-OSR'. That's why it can't find it, that should fix your problem.

Ye that fixed it. Thanks!

From: Bloc
I seen that but it asks for nick? whats that? lol

The nickname you want to give the account you're using. Usually just a 3 or 4 letter name. You don't need it and I think it was mainly used for scripts that would switch between accounts to get longer proggies.

(35:7): Unknown identifier 'Smart_World' at line 34
Compiling failed.

I never seen this before. Any ideas?

Works perfect. Thanks!

From: slashafk
Works perfect. Thanks!

That's nice! Hopefully more people can get proggies like you.

very awsome script :D

-* FightCaveTrainer v0.6
-*
-* Entered: 319
-* Runtime: 22 Hours, 17 Minutes and 24 Seconds

-* FightCaveTrainer v0.6
-*
-* Entered: 1469
-* Runtime: 54 Hours, 38 Minutes and 20 Seconds

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.
Anyone knows what iam doing wrong?

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from 'C:\Simba\SRL.simba'

From: steff
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from 'C:\Simba\SRL.simba'

Please at least read the OP.

OP ? what means OP ?

Original post. The first post of the thread, on the first page right at the top.

Anyone have any clue about this error? I've read through all the guides and replies, can't seem to find a solution.

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed

why am i getting this?

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

From: i8i8i8i
Anyone have any clue about this error? I've read through all the guides and replies, can't seem to find a solution.

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed

Not sure what you're trying to run, but I don't think it is the script. Make sure you are on the right tab.

From: azaghul
why am i getting this?

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

I see I'm not the only one… =/

^^ Yeah once I run the fightcave bot a new tab opens saying this…

Stop asking questions which are answered in all of the help threads…

hey, i keep getting the error Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from 'C:\Simba\SRL.simba'. but i have all the files etc. so i don't understand why i keep getting this error i've tried everything. anyone know a solution?

From: gamergui
Stop asking questions which are answered in all of the help threads…

If you could kindly link me to the topic? Pretty sure this hasn't been answered, you raging child.

-* FightCaveTrainer v0.6
-*
-* Entered: 110
-* Runtime: 7 Hours, 46 Seconds

Thanks for the awesome script it's been working flawlessly for me so far.

Been running for 15 hours now and it's still going :D

EDIT: current proggy -

-* FightCaveTrainer v0.6
-*
-* Entered: 481
-* Runtime: 15 Hours, 29 Minutes and 57 Seconds

-* FightCaveTrainer v0.6
-*
-* Entered: 501
-* Runtime: 16 Hours, 7 Minutes and 37 Seconds

Quite the stable script, thanks!

Thanks a lot for this. I'm trying to get into scripting more and this helps a lot. I'll post a progy when I can!

My buddy managed to add some prayer features to the script, i gave him the best script ever designed for pascal, caver 2.31 script (Scar) and he managed to add prayer support =).

One thing he hasn't done yet is add proper unstucking, because in all honesty i have to downgrade and go without rune armor so i don't reach far into the cave - because if i do i will get stuck!, and the low level monsters just don't cut it. If i knew how to script i would add this.. Now that Wbot is down i don't think we'll ever see a great fight caves script.


Still using this and switching to Eduard's from time to time! THANKS!

no if it needs any thing is auto run to guys and attack to incrase farming rates

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

Ayone have fix for this?

^ no one does dude… it's in the help thread ofc.

From: azaghul
^ no one does dude… it's in the help thread ofc.

I still could not locate the thread that addresses this issue, tried googling too.

Got me 63 strength, 60 range.

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Any1 help please?

Best script ever, got me 60-69str (in a few nights admittedly) but thinking about using till i get enough tokkul for a onyx how long do you think it would take rofl?

some1 plz help!!!

New fonts available. Current version: -1. Latest version: 14
[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

lol?

From: azaghul
^ no one does dude… it's in the help thread ofc.

I was being sarcastic buddy.

Is SMART working for you guys? For me I run the scripts & it does nothing. -.-

Thanks got it working and seems to be flawless other then the "Found Cave" bug, but it doesn't matter too much.

It won't run for me…all it says is that it is unable to find file srl-osr/srl.simba, used from ''…help?

i have the same problem as ''Cruelty1345'' but i've downloaded the ZiP file and extracted into Includes as said on the OP, any help would be appreciated guys

I was running this for a bit today. Left and came back and now it decided that it doesn't want to move? Not sure why… updated everything and closed/reopened it.

if you could fix the getting stuck, this would be a truly flawless script. besides that, great script. thanks

Lemon tree what did you do run it? After you copied and paste what did you fill in or change

sweet script gonna try a 30hour proggy
-* FightCaveTrainer v0.6
-*
-* Entered: 110
-* Runtime: 2 Hours, 36 Minutes and 5 Seconds

@cruelty1345 obviously you have to input your login ("name") , pass and ingame nick. …Script works fine.

-* FightCaveTrainer v0.6
-*
-* Entered: 372
-* Runtime: 9 Hours, 36 Minutes and 23 Seconds

working grate thanks again :P

Ok i re-installed did everything and I get this error
[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.
I put the fonts, the plugins thing, the 3 files login smartparm globals. I will pay 200k gp if someone tell me why the fk am i getting that error.

From: i8i8i8i
If you could kindly link me to the topic? Pretty sure this hasn't been answered, you raging child.

http://94-23-148-96.ovh.net/forum/showthread.php?t=97752
http://villavu.com/forum/showthread.php?p=851555#post851555

Smartasses. Bookmark it and learn to use google

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(241:146): Syntax error at line 240
Compiling failed.


help please i tried installing/reinstalling 5 times.
ive tried everything.

Works well. Haven't had any issues yet.

Would love it if someone could shed some light on what appears to be a rather common problem…unable to find file srl-osr/srl.simba,

mine keeps turning auto-retaliate off for some reason? any ideas? thx

also nice script thank you.

From: bawa
mine keeps turning auto-retaliate off for some reason? any ideas? thx

also nice script thank you.

could you tell me what you did once you copied and pasted the script onto simba? I cannot seem to get mine to work

Still having the same problem

From: cruelty1345
Still having the same problem

Doesn't help that you're reposting the same issue. The scripter obv. is not available to answer right now

From: btax420
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(241:146): Syntax error at line 240
Compiling failed.


help please i tried installing/reinstalling 5 times.
ive tried everything.

I had the same error but its working now. Make the script look lke this http://gyazo.com/6799e2efd8feac833b5d442364e06450

My post got overlooked apparently. But so anyone know what to do if your script logs in and adjusts the screen then does nothing? It presses a few buttons and stuff but then decides to do nothing, and I'm just outside of the cave.

From: silbot
My post got overlooked apparently. But so anyone know what to do if your script logs in and adjusts the screen then does nothing? It presses a few buttons and stuff but then decides to do nothing, and I'm just outside of the cave.

same here

Can someone tell me where I can download the SRL-OL instead of the Unofficial DannyRS one?

You're just sitting outside the cave as well?

Unable to find file 'SRL-OSR/Srl.simba' used from 'C:\Simba\Scripts\SimpleFightCaveTrainer.simba'


First i had danny's include, then added srl-osr, but smth is wrong ..

From: silbot
You're just sitting outside the cave as well?

If you're stuck standing outside the cave it's likely that you're wearing something that interferes with the script's ability to find the cave entrance. This is mostly caused by wearing something white. Boots, capes, helmets, hair, saradomin trimmed plate body etc. For some people even the white part of an amulet doesn't work. Try removing any equipment that is white and post back if you're still having trouble.

From: skautas
Unable to find file 'SRL-OSR/Srl.simba' used from 'C:\Simba\Scripts\SimpleFightCaveTrainer.simba'


First i had danny's include, then added srl-osr, but smth is wrong ..

Make sure you get SRL-OSR from the Github link. Take that folder you get (should be named SRL-OSR-master) and move that to the includes folder. Rename the folder SRL-OSR. That should fix it. It can't find the file because it can't find the folder. Once you rename your folder, it will find the file. Let me know if this doesn't work!:)

From: kerusia
If you're stuck standing outside the cave it's likely that you're wearing something that interferes with the script's ability to find the cave entrance. This is mostly caused by wearing something white. Boots, capes, helmets, hair, saradomin trimmed plate body etc. For some people even the white part of an amulet doesn't work. Try removing any equipment that is white and post back if you're still having trouble.

I am wearing gold trimmed black with dragon skimmy. Nothing white on me. Banked my ammy as well. The script last clicks my stats tab and then thats where it stops

-* FightCaveTrainer v0.6
-*
-* Entered: 90
-* Runtime: 5 Hours, 1 Minutes and 51 Seconds
Working Great! almost 60 str :)

Yes, now it is working, but is was spamming all the time :

We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!


Just later noticed, that it was because of desert boots lol :) First time using color bots :P

From: silbot
I am wearing gold trimmed black with dragon skimmy. Nothing white on me. Banked my ammy as well. The script last clicks my stats tab and then thats where it stops

Clicking the stats tab is a normal part of the script. For some reason, yours is not wanting to continue. Double check to make sure all of your extensions are updated, run the script in the highest brightness level of Runescape. If it still doesn't progress past the stats tab click, try starting the script from inside of the Fight Caves, maybe it will fix itself in the loop. IF all of this again fails to work for you, just try completely copy pasting the script over again and try again.

From: kerusia
Clicking the stats tab is a normal part of the script. For some reason, yours is not wanting to continue. Double check to make sure all of your extensions are updated, run the script in the highest brightness level of Runescape. If it still doesn't progress past the stats tab click, try starting the script from inside of the Fight Caves, maybe it will fix itself in the loop. IF all of this again fails to work for you, just try completely copy pasting the script over again and try again.

How to change brightness? That could be prob since it seems dark-ish. I've looked but might be missing how to change that setting.

FOR ANYONE HAVING SRL-OSR ERRORS!

READ THIS!!:

1. Go to https://github.com/SRL/SRL-OSR
3. Hit the ZIP button near the top
5. download the .zip
7. Browse to your Simba/Includes folder
9. make a "SRL-OSR" Folder!
11. extract contents of ZIP into the folder you just made
13. ENJOY!

From: silbot
How to change brightness? That could be prob since it seems dark-ish. I've looked but might be missing how to change that setting.

This is done in RuneScape in the settings tab. Move the slider for brightness (the sun) all the way to the right.

From: gamergui
http://94-23-148-96.ovh.net/forum/showthread.php?t=97752
http://villavu.com/forum/showthread.php?p=851555#post851555

Smartasses. Bookmark it and learn to use google

Facepalm. Do you even read the issue I'm having instead of making snide remarks?

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

I'm not having problems with smartparams….

i8i8i8i

Have you modified anything in the script?

From: kerusia
This is done in RuneScape in the settings tab. Move the slider for brightness (the sun) all the way to the right.

Wow…. don't I feel stupid now. *face palm*

silbot,

Is the script working for you now :D?

From: kerusia
i8i8i8i

Have you modified anything in the script?

Nope, so that's why I'm really confused lol, I could run all the other scripts fine =/

Running very well…only thing is that it doesn't click while in the cave?? So my character automatically logs out while in the cave cause he spends so much time in it without dying..is there something I should be typing into the script prior to running it so that it clicks while in the cave??? Please help?

ANTI-BOT SYSTEMS HAVE BEEN PUT IN PLACE THIS WEEK
PLEASE POST IF YOU HAVE BEEN BANNED, AND WHAT SCRIPT YOU WERE USING
1 firecaver banned (friend)
1 essencer banned (mine)
not lying, read forums, just trying to help you guys out

Proggy:
-* FightCaveTrainer v0.6
-*
-* Entered: 420
-* Runtime: 14 Hours, 10 Minutes and 33 Seconds

Also, wondering if anyone has been banned using this yet? It seems like it would be very easy to detect if jagex actually implemented some macro detection software.

From: Hammerdin
ANTI-BOT SYSTEMS HAVE BEEN PUT IN PLACE THIS WEEK
PLEASE POST IF YOU HAVE BEEN BANNED, AND WHAT SCRIPT YOU WERE USING
1 firecaver banned (friend)
1 essencer banned (mine)
not lying, read forums, just trying to help you guys out

I'm pretty sure you're lying, as there is nothing on the forums. Post detailed pictures if you want anyone to listen to you, because nobody is going to.

Does it support magic?

going to try this out
from other responses, this looks sick as hell.

hmmmm. couldn't compile. The error i got is

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.

I have the new SRL and I have the old 07 fonts. Ill try finding the never fonts and see if that fixes it.

I'm geting about 11704 xp/hr :/

ran for 3hours 9Minutes 3Seconds

got aorund 2k thzartokens.

Is it supposed to just walk to the middle, and autoattack?
Is there any way to implement maybe optional eating/pray?

From: $cammer4life
I'm geting about 11704 xp/hr :/

ran for 3hours 9Minutes 3Seconds

got aorund 2k thzartokens.

Is it supposed to just walk to the middle, and autoattack?
Is there any way to implement maybe optional eating/pray?

Eating and Prayer would actually reduce your XP per hour, considering it would have to bank after each trip (and your pray drains EXTREMELY FAST) due to the lvl 22s draining your prayer.

getting
[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.
same as i8i8i8i8ii8ii8ii88i8i

http://villavu.com/forum/showthread.php?t=99604

http://gyazo.com/bd05c952234d9f0b53c8eb700ccedef3

Nice script man! 13 hours, 21 minutes, and still going strong!

okay i got it working thanks to someone but when i run the script it clicks the ground twice and just stands there?
yes i got it on brightest and not wearing anything white

i also tried changing the cave color, didnt work either

FightCaveTrainer v0.6
-*
-* Entered: 159
-* Runtime: 5 Hours, 5 Minutes and 34 Seconds

Works fine, I just don't like when it sometimes clicks on attack styles and clicks off/on auto retaliate.

From: skautas
FightCaveTrainer v0.6
-*
-* Entered: 159
-* Runtime: 5 Hours, 5 Minutes and 34 Seconds

Works fine, I just don't like when it sometimes clicks on attack styles and clicks off/on auto retaliate.

SO its not pure safe?

worked fine for me :)

From: Belak70
SO its not pure safe?

Idk, you can try edit code.

[Error] C:\Simba\Includes\SRL-OSR\SRL\core\flag.simba(34:28): Unknown type 'TVector' at line 33
[Error] C:\Simba\Includes\SRL-OSR\SRL\core\flag.simba(34:28): Unknown identifier '' at line 33
Compiling failed.
[Error] C:\Simba\Includes\SRL-OSR\SRL\core\flag.simba(34:28): Unknown type 'TVector' at line 33
[Error] C:\Simba\Includes\SRL-OSR\SRL\core\flag.simba(34:28): Unknown identifier '' at line 33
Compiling failed.
[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

This is the first fight cave script that has worked for me and it is FLAWLESS. All the other ones I tried had trouble with entrance detection even after editing DTM multiple times, not reliable… But this one has worked for me every single time I run it and while it's not perfect it will not get stuck and it WILL keep running. I ran it for 10+ hours on accident already, came back and realized I left it running and manually stopped it. Great work.

Edit: Also this script has not switched styles on me. I've gained no levels besides the style I have it set to. I suppose stuff can happen so if you're a 1 defense pure (stupid IMO anyway) you may not want to bot period.

is there any code you can input to log back in after the 6 hour limit ? " SRL_SIXHOURFIX := TRUE; " i know of this but dont know where to place it in the scripting?

Great Script

-* FightCaveTrainer v0.6
-*
-* Entered: 82
-* Runtime: 6 Hours, 35 Minutes and 55 Seconds

Progress so far!

It has been working all night and would've kept moving on if not for system update. :) ..really nice script.

-* Entered: 151
-* Runtime: 11 Hours, 52 Minutes and 26 Seconds

OP, can we get a Pure safe version of this?
And can someone tell me how many arrows they've gone through leveling range with this script?

Amazing script. I didn't have to replace/place any 07 font folder thing and the script works fine. Should I be worried?

It sometimes gets to one of the corners where no monsters are coming (When you get around rangers) and then it idles there till log out.

Other than that, great script :)

I'm getting an error saying

[Error] C:\Simba\Includes\SRL-OSR\SRL\misc\SmartParams.Simba(35:7): Unknown identifier 'Smart_World' at line 34
Compiling failed.

Has anyone had the same issue and solved it?

everything compiles correctly and logins and everything but it just stands outside outside the cave entrance after checking statsTab..
Help would be appreciated!
I think it may have something to do with the fonts but i'm not too sure, might be going on a wild goose chase.

read the post guys.. every error u talked about some one replyed with how to fix..stop being lazy

How do u have to call it? help please :)

Can you maybe implement it so that when it enters corners it goes back to the center. This is where it gets stuck

It continually spams:

We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!

I've tried banking one item at a time to see if it was something I am wearing but haven't found anything.

EDIT: Wow, unexpected. I think it dislikes the shoulder pads I have on my character.
EDIT2: Nevermind… changed outfit and still receiving spam.

works fine for me

-* FightCaveTrainer v0.6
-*
-* Entered: 30
-* Runtime: 2 Hours, 42 Minutes and 12 Seconds



gotta be something your doing

From: marijuana420
works fine for me

-* FightCaveTrainer v0.6
-*
-* Entered: 30
-* Runtime: 2 Hours, 42 Minutes and 12 Seconds



gotta be something your doing

Like I said, I've tried changing everything I'm wearing but I still receive the spam. Other than that it is running just fine.

try to close out of simba and smart and reload..

Clicks on the stats tab and stands there doing nothing …

FIX ASAP

From: marijuana420
try to close out of simba and smart and reload..

Already have… I'll load Simba onto a VM and see if that does anything. If not, I'll just mess around with it after class to figure it out. I'm guessing I can change the whiteCaveEntrance variant to fix it but I cba to do it at the moment.

From: miley
Clicks on the stats tab and stands there doing nothing …

FIX ASAP

First time I've heard of a problem like that. I'm guessing the problem is on your end somehow.

Exception in Script: Unable to find file 'C:\Simba\Includes\SRL-OSR/SRL/core/antirandoms\mordaut.simba' used from 'C:\Simba\Includes\SRL-OSR/SRL/core/antirandoms/antirandoms.simba'


is this anti leach?

From: b0bs4g3t
Exception in Script: Unable to find file 'C:\Simba\Includes\SRL-OSR/SRL/core/antirandoms\mordaut.simba' used from 'C:\Simba\Includes\SRL-OSR/SRL/core/antirandoms/antirandoms.simba'


is this anti leach?

No, you are missing a file it looks like.

In the "C:\Simba\Includes\SRL-OSR/SRL/core/antirandoms" folder, create a new file called "mordaut.simba" and then paste this code into it. (This is from the SRL-OSR file.)

(*
Mordaut
=======

Stores all the routines to solve the Mordaut random.  None of these routines
should be used throughout scripts.  They only need to be called in SRL's random
detection methods.

This solver uses a "score" system to determine which item is the odd one out.
A rotating object is determined using the TRotateObject type and
DebugRotateObject method both found in common.simba.  Each object is declared
in MD_GetObject and is compared to a scanned object in each of the slots
depending on the puzzle that needs to be solved.

The puzzles are stored in separate arrays (big and small).  The big puzzles are
the ones where you have to match 3 items to the wording on the right.  The small
puzzles are the ones you have to click the item that comes next in the sequence.

*)

type
  TMDBigPuzzle = record
    name: string;
    idText: TStringArray;
    objs: TRotateObjectArray;
  end;
  TMDBigPuzzleArray = array of TMDBigPuzzle;

const
  MD_NPC_MORDAUT = 'Mr.Mordaut';

  // new data for MD_GetObject will need to be gathered if these are to change
  MD_ACCURACY  = 50; // gets the average of MD_ACCURACY times to ID objects
  MD_OBJ_SIZE  = 25; // split TPA into this size of box
  MD_MIN_SCORE = 25; // minimum score for an object to be ID'd

const
  MD_OBJECT_COUNT = 62;
    MD_OBJ_SCIMITAR   = 0;
    MD_OBJ_LONGSWORD  = 1;
    MD_OBJ_BATTLEAXE  = 2;
    MD_OBJ_MACE       = 3;
    MD_OBJ_TEA        = 4;
    MD_OBJ_BEER       = 5;
    MD_OBJ_MARTINI    = 6;
    MD_OBJ_VODKA      = 7;
    MD_OBJ_PICKAXE    = 8;
    MD_OBJ_ORE        = 9;
    MD_OBJ_HAMMER     = 10;
    MD_OBJ_BAR        = 11;
    MD_OBJ_PLATEBODY  = 12;
    MD_OBJ_SHORTBOW   = 13;
    MD_OBJ_ARROWS     = 14;
    MD_OBJ_CROSSBOW   = 15;
    MD_OBJ_LONGBOW    = 16;
    MD_OBJ_FROG       = 17;
    MD_OBJ_THIEF      = 18;
    MD_OBJ_MIME       = 19;
    MD_OBJ_NECKLACE   = 20;
    MD_OBJ_TIARA      = 21;
    MD_OBJ_SYMBOL     = 22;
    MD_OBJ_RING       = 23;
    MD_OBJ_LONG       = 24;
    MD_OBJ_FULLHELM   = 25;
    MD_OBJ_KITE       = 26;
    MD_OBJ_PLATE      = 27;
    MD_OBJ_CAVALIER   = 28;
    MD_OBJ_PIRATE     = 29;
    MD_OBJ_JESTER     = 30;
    MD_OBJ_LOGS       = 31;
    MD_OBJ_TINDERBOX  = 32;
    MD_OBJ_LAMP       = 33;
    MD_OBJ_CANDLE     = 34;
    MD_OBJ_RAKE       = 35;
    MD_OBJ_WATERCAN   = 36;
    MD_OBJ_SPADE      = 37;
    MD_OBJ_TROWEL     = 38;
    MD_OBJ_SQUARE     = 39;
    MD_OBJ_WOODEN     = 40;
    MD_OBJ_KITESHIELD = 41;
    MD_OBJ_SHRIMP     = 42;
    MD_OBJ_SARDINE    = 43;
    MD_OBJ_MACKEREL   = 44;
    MD_OBJ_SWORDFISH  = 45;
    MD_OBJ_TROUT      = 46;
    MD_OBJ_BOOTS      = 47;
    MD_OBJ_BOOTS_2    = 48;
    MD_OBJ_HOOK       = 49;
    MD_OBJ_EYEPATCH   = 50;
    MD_OBJ_RUNE       = 51;
    MD_OBJ_STAFF      = 52;
    MD_OBJ_HARPOON    = 53;
    MD_OBJ_CHEFHAT    = 54;
    MD_OBJ_APRON      = 55;
    MD_OBJ_BREAD      = 56;
    MD_OBJ_CAKE       = 57;
    MD_OBJ_BANANA     = 58;
    MD_OBJ_STRAWBERRY = 59;
    MD_OBJ_PINEAPPLE  = 60;
    MD_OBJ_GRAPES     = 61;

const
  MD_PUZZLE_BIG_COUNT = 10;
    MD_PUZZLE_BIG_DRINK    = 0;
    MD_PUZZLE_BIG_PIRATE   = 1;
    MD_PUZZLE_BIG_JEWEL    = 2;
    MD_PUZZLE_BIG_RANGE    = 3;
    MD_PUZZLE_BIG_FIRE     = 4;
    MD_PUZZLE_BIG_MELEE    = 5;
    MD_PUZZLE_BIG_MAGIC    = 6;
    MD_PUZZLE_BIG_DISGUISE = 7;
    MD_PUZZLE_BIG_HAT      = 8;
    MD_PUZZLE_BIG_FISH     = 9;

var
  // stores the background colors and tolerances of the small and big puzzles
  MD_ExColSmall, MD_ExColBig, MD_ExTolSmall, MD_ExTolBig: TIntegerArray;

(**
 * Author: Coh3n
 * Description: Declares global variables.  Used so it can be easily updated.
 *)
procedure MD_DeclareGlobals();
begin
  // background colors of the small puzzle
  MD_ExColSmall := [4674119, 5265999];
  MD_ExTolSmall := [17, 17];

  // background colors of the big puzzle
  MD_ExColBig := [13423575, 12897741];
  MD_ExTolBig := [25, 25];
end;

(**
 * Author: Ashaman88
 * Description: Returns true if player is in the random.
 *)
function MD_Detect(): boolean;
begin
  result := (getNPCChatName() = MD_NPC_MORDAUT) and (not tabExists(TAB_MAGIC));
  if not result then
    if not tabexists(TAB_MAGIC) then
      result:= ((countdots('yellow') = 7) and (inrange(countcolor(243,MMX1,MMY1,MMX2,MMY2),10,20)));
end;    

(**
 * Author: Coh3n
 * Description: Stores all the Mordaut object properties.  Data gathered using
 * MD_DebugSmall/BigPuzzle.
 *)
function MD_GetObject(obj: integer): TRotateObject;
begin
  case obj of
    MD_OBJ_SCIMITAR:
      with result do
      begin
        name := 'Scimitar';
        use := 'Weapon';
        count := 280;
        width := 41;
        height := 25;
        totalCount := 951;
        coverPercent := 29.0;
      end;

    MD_OBJ_LONGSWORD:
      with result do
      begin
        name := 'Longsword';
        use := 'Weapon';
        count := 107;
        width := 34;
        height := 23;
        totalCount := 670;
        coverPercent := 16.0;
      end;

    MD_OBJ_BATTLEAXE:
      with result do
      begin
        name := 'Battleaxe';
        use := 'Weapon';
        count := 218;
        width := 31;
        height := 19;
        totalCount := 591;
        coverPercent := 37.0;
      end;

    MD_OBJ_MACE:
      with result do
      begin
        name := 'Mace';
        use := 'Weapon';
        count := 205;
        width := 31;
        height := 23;
        totalCount := 700;
        coverPercent := 28.0;
      end;

    MD_OBJ_TEA:
      with result do
      begin
        name := 'Tea';
        use := 'Drink';
        count := 885;
        width := 33;
        height := 33;
        totalCount := 1134;
        coverPercent := 75.0;
      end;

    MD_OBJ_BEER:
      with result do
      begin
        name := 'Beer';
        use := 'Drink';
        count := 588;
        width := 26;
        height := 28;
        totalCount := 751;
        coverPercent := 75.0;
      end;

    MD_OBJ_MARTINI:
      with result do
      begin
        name := 'Martini';
        use := 'Drink';
        count := 435;
        width := 20;
        height := 32;
        totalCount := 680;
        coverPercent := 63.0;
      end;

    MD_OBJ_VODKA:
      with result do
      begin
        name := 'Vodka';
        use := 'Drink';
        count := 350;
        width := 14;
        height := 28;
        totalCount := 424;
        coverPercent := 83.0;
      end;

    MD_OBJ_PICKAXE:
      with result do
      begin
        name := 'Pickaxe';
        use := 'Smithing';
        count := 230;
        width := 45;
        height := 30;
        totalCount := 1380;
        coverPercent := 16.0;
      end;

    MD_OBJ_ORE:
      with result do
      begin
        name := 'Ore';
        use := 'Smithing';
        count := 591;
        width := 38;
        height := 26;
        totalCount := 1053;
        coverPercent := 56.0;
      end;

    MD_OBJ_HAMMER:
      with result do
      begin
        name := 'Hammer';
        use := 'Smithing';
        count := 269;
        width := 30;
        height := 21;
        totalCount := 600;
        coverPercent := 44.0;
      end;

    MD_OBJ_BAR:
      with result do
      begin
        name := 'Bar';
        use := 'Smithing';
        count := 627;
        width := 33;
        height := 25;
        totalCount := 867;
        coverPercent := 72.0;
      end;

    MD_OBJ_PLATEBODY:
      with result do
      begin
        name := 'Platebody';
        use := 'Smithing';
        count := 750;
        width := 36;
        height := 28;
        totalCount := 1039;
        coverPercent := 70.0;
      end;

    MD_OBJ_SHORTBOW:
      with result do
      begin
        name := 'Shortbow';
        use := 'Range';
        count := 288;
        width := 40;
        height := 25;
        totalCount := 870;
        coverPercent := 33.0;
      end;

    MD_OBJ_ARROWS:
      with result do
      begin
        name := 'Arrows';
        use := 'Range';
        count := 232;
        width := 42;
        height := 27;
        totalCount := 975;
        coverPercent := 24.0;
      end;

    MD_OBJ_CROSSBOW:
      with result do
      begin
        name := 'Crossbow';
        use := 'Range';
        count := 247;
        width := 34;
        height := 24;
        totalCount := 847;
        coverPercent := 29.0;
      end;

    MD_OBJ_LONGBOW:
      with result do
      begin
        name := 'Longbow';
        use := 'Range';
        count := 161;
        width := 34;
        height := 21;
        totalCount := 664;
        coverPercent := 24.0;
      end;

    MD_OBJ_FROG:
      with result do
      begin
        name := 'Frog Mask';
        use := 'Disguise';
        count := 850;
        width := 34;
        height := 30;
        totalCount := 1055;
        coverPercent := 81.0;
      end;

    MD_OBJ_MIME:
      with result do
      begin
        name := 'Mime Mask';
        use := 'Disguise';
        count := 728;
        width := 33;
        height := 27;
        totalCount := 919;
        coverPercent := 79.0;
      end;

    MD_OBJ_NECKLACE:
      with result do
      begin
        name := 'Necklace';
        use := 'Jewelery';
        count := 219;
        width := 29;
        height := 19;
        totalCount := 567;
        coverPercent := 38.0;
      end;

    MD_OBJ_TIARA:
      with result do
      begin
        name := 'Tiara';
        use := 'Jewelery';
        count := 202;
        width := 32;
        height := 23;
        totalCount := 758;
        coverPercent := 26.0;
      end;

    MD_OBJ_SYMBOL:
      with result do
      begin
        name := 'Holy Symbol';
        use := 'Jewelery';
        count := 306;
        width := 40;
        height := 25;
        totalCount := 970;
        coverPercent := 32.0;
      end;

    MD_OBJ_RING:
      with result do
      begin
        name := 'Ring';
        use := 'Jewelery';
        count := 245;
        width := 24;
        height := 18;
        totalCount := 452;
        coverPercent := 55.0;
      end;

    MD_OBJ_LONG: // same item is used for more than one puzzle (different use)
      begin
        result := MD_GetObject(MD_OBJ_LONGSWORD);
        result.name := 'Long';
        result.use := 'Combat';
      end;

    MD_OBJ_FULLHELM:
      with result do
      begin
        name := 'Full Helm';
        use := 'Combat';
        count := 468;
        width := 27;
        height := 28;
        totalCount := 760;
        coverPercent := 61.0;
      end;

    MD_OBJ_KITE:
      with result do
      begin
        name := 'Kite';
        use := 'Combat';
        count := 640;
        width := 37;
        height := 24;
        totalCount := 953;
        coverPercent := 68.0;
      end;

    MD_OBJ_PLATE:
      begin
        result := MD_GetObject(MD_OBJ_PLATEBODY);
        result.name := 'Platebody';
        result.use := 'Combat';
      end;

    MD_OBJ_THIEF:
      with result do
      begin
        name := 'Thief Mask';
        use := 'Hat';
        count := 560;
        width := 34;
        height := 28;
        totalCount := 944;
        coverPercent := 59.0;
      end;

    MD_OBJ_JESTER:
      with result do
      begin
        name := 'Jester Hat';
        use := 'Hat';
        count := 416;
        width := 31;
        height := 24;
        totalCount := 747;
        coverPercent := 56.0;
      end;

    MD_OBJ_PIRATE:
      with result do
      begin
        name := 'Pirate Hat';
        use := 'Hat';
        count := 696;
        width := 35;
        height := 27;
        totalCount := 970;
        coverPercent := 72.0;
      end;

    MD_OBJ_CAVALIER:
      with result do
      begin
        name := 'Cavalier Hat';
        use := 'Hat';
        count := 584;
        width := 35;
        height := 23;
        totalCount := 817;
        coverPercent := 71.0;
      end;

    MD_OBJ_LOGS:
      with result do
      begin
        name := 'Logs';
        use := 'Fire';
        count := 820;
        width := 37;
        height := 32;
        totalCount := 1242;
        coverPercent := 65.0;
      end;

    MD_OBJ_TINDERBOX:
      with result do
      begin
        name := 'Tinderbox';
        use := 'Fire';
        count := 1485;
        width := 42;
        height := 44;
        totalCount := 1878;
        coverPercent := 79.0;
      end;

    MD_OBJ_LAMP:
      with result do
      begin
        name := 'Lamp';
        use := 'Fire';
        count := 425;
        width := 23;
        height := 27;
        totalCount := 640;
        coverPercent := 66.0;
      end;

    MD_OBJ_CANDLE:
      with result do
      begin
        name := 'Candle';
        use := 'Fire';
        count := 0;
        width := 0;
        height := 0;
        totalCount := 0;
        coverPercent := 0.0;
      end;

    MD_OBJ_RAKE:
      with result do
      begin
        name := 'Rake';
        use := 'Farming';
        count := 222;
        width := 50;
        height := 32;
        totalCount := 1459;
        coverPercent := 15.0;
      end;

    MD_OBJ_WATERCAN:
      with result do
      begin
        name := 'Watering Can';
        use := 'Farming';
        count := 625;
        width := 30;
        height := 35;
        totalCount := 1072;
        coverPercent := 58.0;
      end;

    MD_OBJ_SPADE:
      with result do
      begin
        name := 'Spade';
        use := 'Farming';
        count := 338;
        width := 44;
        height := 30;
        totalCount := 1203;
        coverPercent := 28.0;
      end;

    MD_OBJ_TROWEL:
      with result do
      begin
        name := 'Trowel';
        use := 'Farming';
        count := 275;
        width := 31;
        height := 21;
        totalCount := 650;
        coverPercent := 44.0;
      end;

    MD_OBJ_SQUARE:
      with result do
      begin
        name := 'Square Shield';
        use := 'Shield';
        count := 600;
        width := 37;
        height := 25;
        totalCount := 900;
        coverPercent := 65.0;
      end;

    MD_OBJ_WOODEN:
      with result do
      begin
        name := 'Wooden Shield';
        use := 'Shield';
        count := 498;
        width := 32;
        height := 23;
        totalCount := 750;
        coverPercent := 66.0;
      end;

    MD_OBJ_KITESHIELD:
      begin
        result := MD_GetObject(MD_OBJ_KITE);
        result.name := 'Kiteshield';
        result.use := 'Shield';
      end;

    MD_OBJ_SHRIMP:
      with result do
      begin
        name := 'Shrimp';
        use := 'Fish';
        count := 262;
        width := 37;
        height := 24;
        totalCount := 914;
        coverPercent := 29.0;
      end;

    MD_OBJ_SARDINE:
      with result do
      begin
        name := 'Sardine';
        use := 'Fish';
        count := 121;
        width := 22;
        height := 15;
        totalCount := 320;
        coverPercent := 38.0;
      end;

    MD_OBJ_MACKEREL:
      with result do
      begin
        name := 'Mackerel';
        use := 'Fish';
        count := 238;
        width := 31;
        height := 18;
        totalCount := 599;
        coverPercent := 40.0;
      end;

    MD_OBJ_SWORDFISH:
      with result do
      begin
        name := 'Swordfish';
        use := 'Fish';
        count := 218;
        width := 37;
        height := 23;
        totalCount := 836;
        coverPercent := 26.0;
      end;

    MD_OBJ_BOOTS:
      with result do
      begin
        name := 'Boots';
        use := 'Boots';
        count := 587;
        width := 30;
        height := 28;
        totalCount := 900;
        coverPercent := 67.0;
      end;

    MD_OBJ_BOOTS_2:
      with result do
      begin
        name := 'Boots 2';
        use := 'Boots';
        count := 520;
        width := 31;
        height := 29;
        totalCount := 930;
        coverPercent := 55.0;
      end;

    MD_OBJ_EYEPATCH:
      with result do
      begin
        name := 'Eye Patch';
        use := 'Pirate';
        count := 255;
        width := 32;
        height := 20;
        totalCount := 630;
        coverPercent := 40.0;
      end;

    MD_OBJ_HOOK:
      with result do
      begin
        name := 'Pirate Hook';
        use := 'Pirate';
        count := 224;
        width := 32;
        height := 23;
        totalCount := 706;
        coverPercent := 32.0;
      end;

    MD_OBJ_RUNE:
      with result do
      begin
        name := 'Rune';
        use := 'Magic';
        count := 800;
        width := 35;
        height := 29;
        totalCount := 1040;
        coverPercent := 75.0;
      end;

    MD_OBJ_STAFF:
      with result do
      begin
        name := 'Staff';
        use := 'Magic';
        count := 96;
        width := 39;
        height := 26;
        totalCount := 878;
        coverPercent := 11.0;
      end;

    MD_OBJ_HARPOON:
      with result do
      begin
        name := 'Harpoon';
        use := 'Fish';
        count := 194;
        width := 35;
        height := 23;
        totalCount := 738;
        coverPercent := 24.0;
      end;

    MD_OBJ_TROUT:
      with result do
      begin
        name := 'Trout';
        use := 'Fish';
        count := 320;
        width := 32;
        height := 23;
        totalCount := 700;
        coverPercent := 45.0;
      end;

    MD_OBJ_CHEFHAT:
      with result do
      begin
        name := 'Chef''s Hat';
        use := 'Cook';
        count := 645;
        width := 36;
        height := 25;
        totalCount := 942;
        coverPercent := 68.0;
      end;

    MD_OBJ_APRON:
      with result do
      begin
        name := 'Apron';
        use := 'Cook';
        count := 340;
        width := 31;
        height := 20;
        totalCount := 637;
        coverPercent := 53.0;
      end;

    MD_OBJ_BREAD:
      with result do
      begin
        name := 'Bread';
        use := 'Cook';
        count := 535;
        width := 30;
        height := 22;
        totalCount := 676;
        coverPercent := 78.0;
      end;

    MD_OBJ_CAKE:
      with result do
      begin
        name := 'Cake';
        use := 'Cook';
        count := 975;
        width := 35;
        height := 31;
        totalCount := 1110;
        coverPercent := 88.0;
      end;

    MD_OBJ_BANANA:
      with result do
      begin
        name := 'Banana';
        use := 'Fruit';
        count := 399;
        width := 34;
        height := 24;
        totalCount := 799;
        coverPercent := 50.0;
      end;

    MD_OBJ_STRAWBERRY:
      with result do
      begin
        name := 'Strawberry';
        use := 'Fruit';
        count := 379;
        width := 20;
        height := 24;
        totalCount := 510;
        coverPercent := 74.0;
      end;

    MD_OBJ_PINEAPPLE:
      with result do
      begin
        name := 'Pineapple';
        use := 'Fruit';
        count := 600;
        width := 33;
        height := 33;
        totalCount := 1098;
        coverPercent := 55.0;
      end;

    MD_OBJ_GRAPES:
      with result do
      begin
        name := 'Grapes';
        use := 'Shield';
        count := 190;
        width := 23;
        height := 15;
        totalCount := 351;
        coverPercent := 54.0;
      end;

    else
      addToSRLLog('MD_GetObject: Invalid object '+toStr(obj));
  end;
end;

(**
 * Author: Coh3n
 * Description: results the DTMs to detect which "big" puzzle to solve.
 *)
function MD_GetBigPuzzles(): TMDBigPuzzleArray;
begin
  setLength(result, MD_PUZZLE_BIG_COUNT);

  with result[MD_PUZZLE_BIG_DRINK] do
  begin
    name := 'Big Puzzle: Drinks';
    idText := ['thirst', 'dehydrate'];
    objs := [MD_GetObject(MD_OBJ_TEA), MD_GetObject(MD_OBJ_BEER),
             MD_GetObject(MD_OBJ_MARTINI)];
  end;

  with result[MD_PUZZLE_BIG_MAGIC] do
  begin
    name := 'Big Puzzle: Magic';
    idText := ['stic', 'wizard'];
    objs := [MD_GetObject(MD_OBJ_STAFF), MD_GetObject(MD_OBJ_RUNE),
             MD_GetObject(MD_OBJ_RUNE)];
  end;

  with result[MD_PUZZLE_BIG_DISGUISE] do
  begin
    name := 'Big Puzzle: Disguise';
    idText := ['face', 'mask', 'disg', 'hidden'];
    objs := [MD_GetObject(MD_OBJ_FROG), MD_GetObject(MD_OBJ_THIEF),
             MD_GetObject(MD_OBJ_MIME)];
  end;

  with result[MD_PUZZLE_BIG_MELEE] do
  begin
    name := 'Big Puzzle: Melee';
    idText := ['sword', 'weapon', 'melee'];
    objs := [MD_GetObject(MD_OBJ_LONGSWORD), MD_GetObject(MD_OBJ_SCIMITAR),
             MD_GetObject(MD_OBJ_BATTLEAXE)];
  end;

  with result[MD_PUZZLE_BIG_HAT] do
  begin
    name := 'Big Puzzle: Hat';
    idText := ['hat', 'cap', 'head', 'tip', 'hink'];
    objs := [MD_GetObject(MD_OBJ_CAVALIER), MD_GetObject(MD_OBJ_JESTER),
             MD_GetObject(MD_OBJ_PIRATE)];
  end;

  with result[MD_PUZZLE_BIG_FIRE] do
  begin
    name := 'Big Puzzle: Fire';
    idText := ['arks', 'fire', 'nitin', 'brain', 'star'];
    objs := [MD_GetObject(MD_OBJ_LOGS), MD_GetObject(MD_OBJ_TINDERBOX),
             MD_GetObject(MD_OBJ_LAMP)];
  end;

  with result[MD_PUZZLE_BIG_PIRATE] do
  begin
    name := 'Big Puzzle: Pirate';
    idText := ['pirate', 'tis', 'Yarr'];
    objs := [MD_GetObject(MD_OBJ_HOOK), MD_GetObject(MD_OBJ_PIRATE),
             MD_GetObject(MD_OBJ_EYEPATCH)];
  end;

  with result[MD_PUZZLE_BIG_RANGE] do
  begin
    name := 'Big Puzzle: Range';
    idText := ['archery', 'arrow'];
    objs := [MD_GetObject(MD_OBJ_LONGBOW), MD_GetObject(MD_OBJ_ARROWS),
             MD_GetObject(MD_OBJ_CROSSBOW)];
  end;

  with result[MD_PUZZLE_BIG_FISH] do
  begin
    name := 'Big Puzzle: Fish';
    idText := ['ishy', 'water', 'ish', 'eel like a'];
    objs := [MD_GetObject(MD_OBJ_TROUT), MD_GetObject(MD_OBJ_HARPOON),
             MD_GetObject(MD_OBJ_TROUT)];
  end;

  with result[MD_PUZZLE_BIG_JEWEL] do
  begin
    name := 'Big Puzzle: Jewelery';
    idText := ['ineries', 'ecio', 'ewell'];
    objs := [MD_GetObject(MD_OBJ_SYMBOL), MD_GetObject(MD_OBJ_RING),
             MD_GetObject(MD_OBJ_NECKLACE)];
  end;
end;

(**
 * Author: Coh3n
 * Description: Returns all the possible small puzzles to solve. The string
 * value MUST be the same as the 'use' field for the corresponding objects.
 *)
function MD_GetSmallPuzzles(): TStringArray;
begin
  setLength(result, 15);

  result[0]  := 'Weapon';
  result[1]  := 'Smithing';
  result[2]  := 'Range';
  result[3]  := 'Jewelery';
  result[4]  := 'Combat';
  result[5]  := 'Drink';
  result[6]  := 'Hat';
  result[7]  := 'Farming';
  result[8]  := 'Shield';
  result[9]  := 'Fish';
  result[10] := 'Boots';
  result[11] := 'Magic';
  result[12] := 'Cook';
  result[13] := 'Fruit';
  result[14] := 'Fire';
end;

(**
 * Author: Coh3n
 * Description: Returns the score of obj1 compared to obj2.  The higher the
 * score the more likely the objects are the same.
 *)
function MD_CompareObjects(obj1, obj2: TRotateObject): integer;
begin
  // best score is currently 40
  result := 0;

  if (inRange(obj1.count, obj2.count - 10, obj2.count + 10)) then
    result := result + 3;

  if (obj1.width = obj2.width) then
    result := result + 12
  else
    if (inRange(obj1.width, obj2.width - 2, obj2.width + 2)) then
      result := result + 6;

  if (obj1.height = obj2.height) then
    result := result + 12
  else
    if (inRange(obj1.height, obj2.height - 2, obj2.height + 2)) then
      result := result + 6;

  if (inRange(obj1.totalCount, obj2.totalCount - 75, obj2.totalCount + 75)) then
    result := result + 5;

  if ((obj1.coverPercent > obj2.coverPercent - 3) and (obj1.coverPercent < obj2.coverPercent + 3)) then
    result := result + 8;
end;

(**
 * Author: Coh3n
 * Description: Returns the Mordaut object that best (has the highest score)
 * matches 'scanObj'.
 *)
function MD_IDObject(scanObj: TRotateObject): TRotateObjectArray;
var
  i, c, tmpScore: integer;
  tmpObj: TRotateObject;
begin
  setLength(result, MD_OBJECT_COUNT);

  // loop through all the objects to find which one best matches the scanned object
  for i := 0 to (MD_OBJECT_COUNT - 1) do
  begin
    tmpObj := MD_GetObject(i);
    tmpScore := MD_CompareObjects(tmpObj, scanObj);

    //writeln('tmpObj('+tmpObj.name+') vs. scanObj(): score - '+toStr(tmpScore));

    // set the highest score as result
    if (tmpScore > MD_MIN_SCORE) then
    begin
      //addToSRLLog('MD_IDObject: One match is '+tmpObj.name+' with a score of '+toStr(tmpScore));
      result[c] := tmpObj;
      inc(c);
    end;
  end;

  setLength(result, c);
end;

(**
 * Author: Coh3n
 * Description: Returns a TBox of the big puzzle item slot 'Slot'. Top left
 * is slot 1, botton right is slot 15.
 *)
function MD_BigBox(slot: integer): TBox;
begin
  result := gridBox(slot, 5, 3, 60, 80, 67, 91, point(71, 73));
end;

(**
 * Author: Coh3n
 * Description: Returns a TBox of the small puzzle item slot 'Slot'. Top left
 * is slot 1, botton right is slot 8.
 *)
function MD_SmallBox(slot: integer): TBox;
begin
  result := gridBox(slot, 4, 2, 95, 80, 95, 150, point(110, 100));
end;

(**
 * Author: Nava2
 * Description: Returns true if the big puzzle screen is open.
 *)
function MD_BigScreen(): boolean;
var
  dtmThumb, x, y: integer;
begin
  dtmThumb := DTMFromString('78DA63E4646060E063400187BBD3184480342310FF0702466E208309558D083333030B540D08300A619A83A146002488AA86879911550D1B901025A006E4161E5435E2DC2C286A00ACBB06F0');
  result := findDTM(dtmThumb, x, y, MSX1, MSY1, MSX2, MSY2);
  freeDTM(dtmThumb);
end;

(**
 * Author: Nava2
 * Description: Returns true if the small puzzle screen is open.
 *)
function MD_SmallScreen(): boolean;
begin
  // counts black pixels of the text shadow in the middle of the MS
  result := (countColor(clBlack, 165, 142, 357, 183) = 322);
end;

(**
 * Author: Coh3n
 * Description: Returns the object scanned in 'slot' for the big puzzle.
 *)
function MD_ScanBigObject(slot: integer): TRotateObject;
begin
  result := scanRotateObject(
    MD_ExColBig, MD_ExTolBig, MD_BigBox(slot), MD_OBJ_SIZE, MD_ACCURACY);
end;

(**
 * Author: Coh3n
 * Description: Returns the object scanned in 'slot' for the small puzzle.
 *)
function MD_ScanSmallObject(slot: integer): TRotateObject;
begin
  result := scanRotateObject(
    MD_ExColSmall, MD_ExTolSmall, MD_SmallBox(slot), MD_OBJ_SIZE, MD_ACCURACY);
end;

(**
 * Author: Coh3n & DemiseScythe
 * Description: Returns which small puzzle we have to solve.
 *)
function MD_IDSmallPuzzle(puzzles: TStringArray): integer;
var
  i, j: integer;
  tmpObjs, posObjs: TRotateObjectArray;
  commonUse: string;
begin
  if (not loggedIn()) or (not MD_SmallScreen()) then
    exit;

  addToSRLLog('MD_IDSmallPuzzle: Identifying puzzle');
  result := -1;

  addToSRLLog('MD_IDSmallPuzzle: Scanning objects...');

  // get the possible objects that could be one the top part of the puzzle
  for i := 1 to 3 do // item slots 1-3
  begin
    tmpObjs := MD_IDObject(MD_ScanSmallObject(i));

    for j := 0 to high(tmpObjs) do
    begin
      setLength(posObjs, length(posObjs) + 1);
      posObjs[high(posObjs)] := tmpObjs[j];
    end;
  end;

  addToSRLLog('MD_IDSmallPuzzle: Objects scanned');

  // get's the most common use found in the possible objects
  commonUse := getTROAUse(posObjs);
  addToSRLLog('MD_IDSmallPuzzle: Most common use - '+commonUse);

  // loop through the puzzles, checking which has the proper use
  for i := 0 to high(puzzles) do
    if (commonUse = puzzles[i]) then
    begin
      result := i;
      break;
    end;

  if (result <> -1) then
    addToSRLLog('MD_IDSmallPuzzle: Found Small Puzzle '+puzzles[result])
  else
    addToSRLLog('MD_IDSmallPuzzle: Didn''t ID puzzle');

  // to make sure the player doesn't log out
  if (getCurrentTab() = TAB_FRIENDS) then
    gameTab(TAB_CLAN)
  else
    gameTab(TAB_FRIENDS);
end;

(**
 * Author: Coh3n & DemiseScythe
 * Description: Solves the small puzzle (calls MD_GetSmallPuzzle).
 *)
function MD_SolveSmallPuzzle(puzzle: string): boolean;
var
  i, j, t: integer;
  posObjs: TRotateObjectArray;
begin
  if (not loggedIn()) then
    exit;

  addToSRLLog('MD_SolveSmallPuzzle: Solving...');

  repeat
    inc(t);

    for i := 5 to 8 do // object slots 5-8 (bottom half)
    begin
      posObjs := MD_IdObject(MD_ScanSmallObject(i));

      for j := 0 to high(posObjs) do
        if (lowercase(posObjs[j].use) = lowercase(puzzle)) then
        begin
          addToSRLLog('MD_SolveSmallPuzzle: Found bottom object in slot '+toStr(i));

          // needs specific coords because you can't click anywhere on the item
          mouse(108 + (100 * (i - 5)), 235, 3, 3, mouse_Left);
          result := waitNPCTalking(MD_NPC_MORDAUT, 4000);
          break;
        end;

      if (result) then
        break;
    end;

    if (not result) then
      addToSRLLog('MD_SolveSmallPuzzle: Didn''t find bottom objects, try '+toStr(t));

  until(result or (t >= 3)); // maximum tries

  if (result) then
    addToSRLLog('MD_SolveSmallPuzzle: Solved Small Puzzle '+puzzle)
end;

(**
 * Author: Coh3n
 * Description: Identifies which of the big puzzles we have to solve.
 *)
function MD_IDBigPuzzle(puzzles: TMDBigPuzzleArray): integer;
var
  i, j, h: integer;
  tpa, m: TPointArray;
begin
  if (not loggedIn()) then
    exit;

  result := -1;
  findColorsTolerance(tpa, 13290961, 373, 60, 473, 160, 25);

  // loops through the possible texts in each puzzle in the 'puzzles' array
  for i := 0 to high(puzzles) do
    for j := 0 to high(puzzles[i].idText) do
      // the text on the right size of the puzzle
      if (findTPAInTPA(loadTextTPA(puzzles[i].idText[j], smallCharsNS, h), tpa, m)) then
      begin
        addToSRLLog('MD_GetBigPuzzle: Found '+puzzles[i].name);
        result := i;
        exit;
      end;

  addToSRLLog('MD_GetBigPuzzle: Failed to identify big puzzle');
end;

(**
 * Author: Coh3n
 * Description: Returns true if the swords appear in 'slot'.  Checks to see if
 * that slot has already been clicked.
 *)
function MD_FindSwords(slot: integer): boolean;
var
  x, y, dtmSwords: integer;
  b: TBox;
begin
  if (not loggedIn()) then
    exit;

  dtmSwords := DTMFromString('mbQAAAHicY2VgYPgLxD+AmImRgeELkGYF0i1AuguIO4G4BoonTJzI8O+sJxjLKciDMT9QHB0zYsFgAAB8JQxr');
  b := MD_BigBox(slot);

  if (findDTM(dtmSwords, x, y, b.x1, b.y1, b.x1 + 50, b.y1 + 50)) then
  begin
    addToSRLLog('MD_FindSwords: Slot has already been clicked');
    result := true;
  end;

  freeDTM(dtmSwords);
end;

(**
 * Author: Coh3n & DemiseScythe
 * Description: Solves the big 'puzzle'. Constants at the top of the file.  Will
 * randomly choose slots to scan, then remove that slot from an array. Will
 * check every slot before starting over. Starts over a set number of tries.
 *)
function MD_SolveBigPuzzle(puzzle: TMDBigPuzzle): boolean;
var
  i, clicks, slotsLen, time, index, t: integer;
  objFound: TBooleanArray;
  slots: TIntegerArray;
  tmpObj: TRotateObject;
  p: TPoint;
begin
  markTime(time);

  if ((not loggedIn()) or (not MD_BigScreen())) then
    exit;

  addToSRLLog('MD_SolveBigPuzzle: Solving...');
  setLength(objFound, length(puzzle.objs));

  // scan the entire puzzle a maximum of 5 times
  for t := 1 to 5 do
  begin
    slots := [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15];
    slotsLen := length(slots);

    addToSRLLog('MD_SolveBigPuzzle: Scanning for objects (try '+toStr(t)+')...');

    // randomly chooses a slot to look for the objects
    repeat
      index := random(length(slots));

      if (not MD_FindSwords(slots[index])) then // if that slot has already been clicked
      begin
        p := middleBox(MD_BigBox(slots[index]));

        tmpObj := MD_ScanBigObject(slots[index]);
        for i := 0 to high(puzzle.objs) do
        begin
          if (objFound[i]) then // don't want to look for the same object twice
            continue;

          if (MD_CompareObjects(tmpObj, puzzle.objs[i]) >= MD_MIN_SCORE) then
          begin
            addToSRLLog('MD_SolveBigPuzzle: Found '+puzzle.objs[i].name+' in slot '+toStr(slots[index]));
            mouse(p.x, p.y, 20, 30, mouse_Left);
            objFound[i] := true;
            inc(clicks);
            break;
          end;
        end;

      end else
        if (t = 1) then // in case it's retrying
          inc(clicks);

      // remove the index so we don't search the same box twice
      deleteValueInIntArray(slots, index);

      result := (clicks >= 3); // only need to click 3 times

    until((length(slots) <= 0) or result);

    if (result) then
      break;
  end;

  if (result) then
  begin
    addToSRLLog('MD_SolveBigPuzzle: Solved in '+toStr(timeFromMark(time))+'ms');
    wait(500 + random(500));
    mouse(429, 270, 7, 7, mouse_Left); // click the thumb
    wait(800 + random(500));
  end else
    addToSRLLog('MD_SolveBigPuzzle: Didn''t solve '+puzzle.name);
end;

(**
 * Author: Coh3n & Nava2
 * Description: Exits the classroom.
 *)
function MD_Exit(): boolean;
var
  doorColor, x, y: integer;
  txt, doorDirection, doorType: string;
  p: TPoint;
  a: extended;
begin
  txt := getTextAtExWrap(142, 395, 500, 419, 1, 6, 2, clBlack, 50, upChars);

  // get the door's direction
  doorDirection := lowercase(trim(between('in the ', ' of', txt)));
  case doorDirection of
    'south-west' : begin p := point(MMX1, MMY2); a := 270; end;
    'north'      : begin p := point(MMCX, MMY1); a := 0; end;
    'north-west' : begin p := point(MMX1, MMY1); a := 270; end;
    'south-east' : begin p := point(MMX2, MMY2); a := 90; end;

    else begin
      addtoSRLLog('MD_Exit: Failed to get door direction');
      exit;
    end;
  end;

  // get the door's color
  doorType := lowercase(trim(between(' the ', ' door', txt)));
  case doorType of
    'purple circle' : doorColor := 14754001;
    'red cross'     : doorColor := 1318539;
    'green square'  : doorColor := 3927642;
    'blue star'     : doorColor := 6115385;

    else begin
      addtoSRLLog('MD_Exit: Failed to get door color');
      exit;
    end;
  end;

  addToSRLLog('MD_Exit: Need to exit through '+doorDirection+', '+doorType+' door');
  makeCompass('n');

  // walk to the proper door
  if (TPAWalk(clRed, 50, 0, 0, p)) then
  begin
    makeCompass(a);
    wait(1500 + random(500));

    // find and click the door
    if (findColorTolerance(x, y, doorColor, MSX1, MSY1, MSX2, MSY2, 15)) then
    begin
      mouse(x, y, 5, 5, mouse_Move);

      if (waitUptext('oor', 300)) then
      begin
        addToSRLLog('MD_Exit: Clicking door');
        getMousePos(x, y);
        mouse(x, y, 0, 0, mouse_Left);

        if (didRedClick()) then
          result := waitTabExists(TAB_MAGIC, 8000);
      end;
    end;
  end;
end;

// debugs each rotating item in the Mordaut small puzzle
procedure MD_DebugPuzzle(slots: TIntegerArray; names: TStringArray; use: string; big: boolean);
var
  i: integer;
begin
  MD_DeclareGlobals();

  for i := 0 to high(slots) do
    if (big) then
      debugRotateObject(MD_ScanBigObject(slots[i]), names[i], use)
    else
      debugRotateObject(MD_ScanSmallObject(slots[i]), names[i], use);
end;

(**
 * Author: Coh3n
 * Description: Solves the random.
 *)
const
  _MD_MAX = 6; // maximum puzzle tries

function MD_Solve(): boolean;
var
  t, puz, incorrect, correct: integer;
  bigPuzzles: TMDBigPuzzleArray;
  smallPuzzles: TStringArray;
  solved: boolean;
begin
  if (not loggedIn()) then
    exit;

  t := (getSystemTime + (15 * 60000));

  MD_DeclareGlobals();

  bigPuzzles := MD_GetBigPuzzles();
  smallPuzzles := MD_GetSmallPuzzles();

  repeat
    // solve the big puzzle
    if (MD_BigScreen()) then
    begin
      puz := MD_IDBigPuzzle(bigPuzzles);

      if (puz <> -1) then
        solved := MD_SolveBigPuzzle(bigPuzzles[puz])
      else
        break;
    end;

    // solve the small puzzle
    if (MD_SmallScreen()) then
    begin
      puz := MD_IDSmallPuzzle(smallPuzzles);

      if (puz <> -1) then
        solved := MD_SolveSmallPuzzle(smallPuzzles[puz]);
    end;

    // wait for Mordaut to start talking, otherwise puzzle wasn't solved
    if (solved) then
    begin
      solved := false;
      mouseBox(MIX1, MIY1, MIX2, MIY2, mouse_Move); // move away from MS to get a more accurate scan

      if (waitNPCTalking(MD_NPC_MORDAUT, 3000)) then
        if (findNPCChatTextMulti(['No', 'WRONG'], nothing)) then
        begin
          addToSRLLog('MD_Solve: Incorrectly solved puzzle');
          inc(incorrect);
        end else
          inc(correct);
    end;

    // to bring up the next puzzle or show the solver is done
    if (doConversation('exit', false)) then
      if (MD_Exit()) then
      begin
        if (incorrect > 3) then
          addToSRLLog('MD_Solve: Exited Mordaut, but too many incorrect puzzles')
        else
          result := true;
      end else begin
        addToSRLLog('MD_Solve: Failed to exit classroom');
        break;
      end;

    // checks if we've been trying to solve for too long
    if ((getSystemTime > t) and (not result)) then
    begin
      addToSRLLog('MD_Solve: Mordaut solver timed out');
      break;
    end;

  until(result);
end;

thanks now just need to figure out what to replace RSReady with >.>



Unknown identifier 'RSReady' at line 77
Compiling failed.

I don't have anything remotely similar to that at line 77.
Post lines like 70-80 so I can see it in context?

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from 'C:\Users\13hawkipat\Desktop\fighhtcave.simba'
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.

Don't know what I'm doing wrong..

{$IFDEF SMART8}
Result := SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 503, 's', '', '');
{$ELSE}
Result := SmartSpawnClient(ReplaceWrap(PluginPath, '\', '/', [rfReplaceAll]), Params[0], ',' + Params[1], 765, 503, 's', '', '', -1);
{$ENDIF}

[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(295:135): Invalid number of parameters at line 294
Compiling failed.

then

begin
If RSReady then
Break;
SmartSetRefresh(SmartGetRefresh + 1);
MMouse(4, 4, 0, 0);
SmartSetRefresh(SmartGetRefresh - 1);
if (GetSystemTime >= T) Then
Break;
Wait(500);
end;
end;

From: fishyer
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from 'C:\Users\13hawkipat\Desktop\fighhtcave.simba'
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.

Don't know what I'm doing wrong..

Do you have the SRL-OSR include properly installed?

From: b0bs4g3t
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(295:135): Invalid number of parameters at line 294
Compiling failed.

then

I'm not even sure where that is coming from. Lines 70-80 from this fight caves script are:

If RandomRange(1, 10) > 8 Then
      Begin
        SetRun(true);
        GameTab(tab_Stats);
      End;
      caveEntrances := (caveEntrances + 1);
      WriteLn('Entered cave.');
      ClearDebug;

      WriteLn('-*         FightCaveTrainer v'+version);
      WriteLn('-*         ');

EDIT: Off to school, will check back later.

Exception in Script: Unable to find file 'SRL-OSR/SRL.Simba' used from ''
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

How do i get around this??

From: MrJewbagel
Do you have the SRL-OSR include properly installed?

Yeah, fixed that, me being lazy and posting without reading the thread. Do you know how to fix :


[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

edit: does anyone know the solution or can link me a fix?

FightCaveTrainer v0.6
-*
-* Entered: 73
-* Runtime: 1 Hours, 50 Minutes and 18 Seconds

running very well

Awesome Script! Working flawless so far, and im loving every minute and exp of it =]

From: MrJewbagel
I don't have anything remotely similar to that at line 77.
Post lines like 70-80 so I can see it in context?

is there any specific thing i have to do except of copy paste/run ?

From: weeman91
Exception in Script: Unable to find file 'SRL-OSR/SRL.Simba' used from ''
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

How do i get around this??

Help?

I've run this script flawlessly for 3-5 hours at a time. However today it stops rotating the camera screen sometimes and then hits the logout fail safe after 1 minute of standing. Why does it stop rotating the screen to find the cave entrance?

Seems to be working great. One thing i would like to see is prayer support, because when you die, you get your prayer back anyway, so more xp per hour, winning?

With the new Bot watch up today!
how safe is this still to bot ?

compare to new RS, i hear they ban easly for firecave botting.
would they use the same detect system for 07 ?

Just stands outside cave on stats screen help please?

From: I_GetLucky
Just stands outside cave on stats screen help please?

Having this same problem!

From: MrJewbagel
First time I've heard of a problem like that. I'm guessing the problem is on your end somehow.

I have same problem is this anti leach because I deleted a line and actually got it to enter the cave once but then ran into same problem after I was outside of cave it wouldn't enter it again please help?

Just curious, any bans from doing this too long yet?

YO what did you do to fix standing outside cave on stats screen?

From: weeman91
Having this same problem!

Any1?

This started training defence as I was ranging, any idea why?

From: Evaporation
This started training defence as I was ranging, any idea why?

shouldn't happen lol…
It only switches between your run and stats tab

Anybody know why its getting stuck outside the cave on the stats bar??

[Error] d:\Simba\Includes\SRL-OSR/SRL/core/simba.simba(465:14): Unknown identifier '' at line 464
getting this error pls some1 help.

Still stuck on stats bar anyone know of a fix to this?

Got it clicking on the cave. But when it dies it gets stuck again because it can't seem to see the cave enterance?

Iv remeved all white items but still nothing…

-* FightCaveTrainer v0.6
-*
-* Entered: 211
-* Runtime: 5 Hours, 19 Minutes and 59 Seconds


very nice script

When I enable SMART and run this script, my screen is lag-zilla. I mean, It moves 3 frames, then I appear dead and it logs me out due to the lag.


It's only with this script. Is there anything I can do to try to reduce that?

for some reason it turns off my auto retaliate and turns my attack style to defense ?'
got me 1-8 def while i was afk..-.-

Go see for yourself in game you fat kid.

-* FightCaveTrainer v0.6
-*
-* Entered: 279
-* Runtime: 7 Hours, 32 Seconds

Still running as it should for me but I just started having a problem.

It gets stuck in a corner inside the fight caves where the monsters can't reach you so it just stands there doing nothing. Basically a fatal error since it doesn't stop the script but it stops virtually all functions of it. ;P

I'm getting an error saying

[Error] C:\Simba\Includes\SRL-OSR\SRL\misc\SmartParams.Simba(35:7): Unknown identifier 'Smart_World' at line 34
Compiling failed.

Has anyone had the same issue and solved it?

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.
:(
Is there a fix to this? I'm not a leecher its just that it doesnt look easy to fix

From: Caper
I'm getting an error saying

[Error] C:\Simba\Includes\SRL-OSR\SRL\misc\SmartParams.Simba(35:7): Unknown identifier 'Smart_World' at line 34
Compiling failed.

Has anyone had the same issue and solved it?

You are not meant to get too far in the cave anyway as "bugs" like this may occur. Just lower your defences so you'd die earlier. More sucessful+short runs beat fewer+longer runs where you get stuck.

-* FightCaveTrainer v0.6
-*
-* Entered: 140
-* Runtime: 9 Hours, 39 Minutes and 40 Seconds
working great! best script

I get this error:

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''. * any ideas? i've downloaded and extracted into includes done everything i need to and still says it's missing.

How are some people running and others not? I've been searching videos and forums for hours and i still cant get this script to work. Please someone help
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(35:3): Unknown identifier 'Page' at line 34
Compiling failed.
I changed the "Smart_World" to "Page :=" like a tutorial said and its still screwing up.

function GetRS07World: String;
begin
Page := 'http://oldschool46.runescape.com/,j1'
Params := Explode(',', Page);
Result := Params;
end;

AMAZING!

-* FightCaveTrainer v0.6
-*
-* Entered: 37
-* Runtime: 2 Hours, 17 Minutes and 19 Seconds

Thanks man great script. Could have kept going but I needed to restart my laptop.
-* FightCaveTrainer v0.6
-*
-* Entered: 208
-* Runtime: 12 Hours, 3 Minutes and 56 Seconds

When smart loads and the start up screen is ready, it stops the script. Anyone know why?

I still have some problem with it just sitting on stat screen how do you fix this?

Im using this script but it laggs and as soon as I stop the script I see everything go fast.

IS this script meant to not click attack on the monsters?

From: I_GetLucky
I still have some problem with it just sitting on stat screen how do you fix this?

I get the same problem

Ran 2 caves with no problems so far; my only quarrel with the script is that the mouse seems to be jumping around the player when in the caves, not a problem other than jagex can record mouse movements. Any reason for this or/and is this only happening to me?

Edit:
It also spams "We see the cave entrance!" in the simba debug.
Also, it doesn't click on the monsters, just waits to retaliate.

edit: sorry guys I removed the link

Thats a rat link

do not click anatomical's links

the script will type my username and password, thats it.. cant anyone help?

I always get stuck in the corner of the map, and it since it doesn't run to the centre, it just waits 5 mins then logs out.

From: bslaya
When I run my script I just get a solid white screen in smart.. I can hear the runescape login audio but like I said, white screen.. help appreciated!

having the same issue. i searched the thread for possible explanation, still no response to it.

3 people including me have exhibited this issue.

Edit: A simple restart of the computer resolved the issue.

From: BMWxi
do not click anatomical's links

Sorry, I didn't know it was a rat link. I just saw the video and thought it was legit. Sorry if anyone downloaded it. I've removed the link

-* FightCaveTrainer v0.6
-*
-* Entered: 784
-* Runtime: 20 Hours, 54 Minutes and 38 Seconds

This Bot is pretty amazing, its been on for nearly 24 hours for me now without any problems.. 1 big thank you. :)

From: Nanner
Ran 2 caves with no problems so far; my only quarrel with the script is that the mouse seems to be jumping around the player when in the caves, not a problem other than jagex can record mouse movements. Any reason for this or/and is this only happening to me?

Edit:
It also spams "We see the cave entrance!" in the simba debug.
Also, it doesn't click on the monsters, just waits to retaliate.

Because it is color bot. It clicks on white color to enter the cave. In other words : remove and drop your fcking desert boots :P

It gets stuck in the south west side probably once an hour. I have to then manually move the bot to the middle.
Is this happening for anyone else?

From: shimmy2501
It gets stuck in the south west side probably once an hour. I have to then manually move the bot to the middle.
Is this happening for anyone else?

Script is made to be simple and only enter the cave and toggle auto retaliate when only 1 health bar is shown for more than a couple seconds. That's all it does, in a loop.

If it does get stuck, you'll eventually log out due to inactivity, the script will log back and and continue on its way. So it's flawless, other than the fact that you may lose some xp/h do to that happening every once in a while.

It works fine but i was wondering why when it's in the cave it does this
-* FightCaveTrainer v0.6
-*
-* Entered: 4
-* Runtime: 13 Minutes and 4 Seconds
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
and it keeps saying that while it's in the cave? any ideas…

From: botterboi
It works fine but i was wondering why when it's in the cave it does this
-* FightCaveTrainer v0.6
-*
-* Entered: 4
-* Runtime: 13 Minutes and 4 Seconds
We see cave entrance!
We see cave entrance!
We see cave entrance!
We see cave entrance!
and it keeps saying that while it's in the cave? any ideas…

REVOME ALL WHITE items from your character.

Also mine progress:

FightCaveTrainer v0.6
-*
-* Entered: 214
-* Runtime: 7 Hours, 7 Minutes and 16 Seconds

From: SeanStar
Script is made to be simple and only enter the cave and toggle auto retaliate when only 1 health bar is shown for more than a couple seconds. That's all it does, in a loop.

If it does get stuck, you'll eventually log out due to inactivity, the script will log back and and continue on its way. So it's flawless, other than the fact that you may lose some xp/h do to that happening every once in a while.

Total props to the developer. It's just that I the word "flawless" can vary, so I was assuming the people who were saying this bot is flawless were not getting stuck.

I'll leave it as a future request. :)

started 10 pm with 55 range and 10k iron knifes. it's now 3pm 63 range 4k knifes. thanks a bunch! genius script for pures.

-* FightCaveTrainer v0.6
-*
-* Entered: 615
-* Runtime: 17 Hours, 13 Minutes and 58 Seconds

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

Anyone know how to fix?

Awesome Script! It hasn't failed for like 30 hours now.

You could improve this by adding some anti-ban, usage of special attacks and potions or something like that.
But it isnt necessary, great job

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(293:131): Invalid number of parameters at line 292
Compiling failed.

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

I'm new to simba can anyone tell me how to run a script,I have smart8 setup and the sample script works

Program testP07;

{$I SRL/SRL.Simba}
{$I P07Include.Simba}

//LOGIN INFO STUFF
Procedure P07_DeclarePlayer;
Begin
P07_PlayerName:='username';
P07_PlayerPass:='password';
End;

Begin

P07_DeclarePlayer;
SetupP07Include;
ActivateClient;
Wait(2000);
If (Not P07_LoggedIn) Then
P07_LogInPlayer;
P07_MakeCameraAngleHigh;
P07_MakeCompassNorth;

Writeln(P07_GetUpText);

If P07_BankScreen Then
WriteLn('Bank is Open');
If P07_InvFull Then
WriteLn('Inventory is Full');

End.

does it loot arrows/knives?

-* FightCaveTrainer v0.6
-*
-* Entered: 778
-* Runtime: 24 Hours, 51 Minutes and 21 Seconds

-* FightCaveTrainer v0.6
-*
-* Entered: 2
-* Runtime: 5 Minutes and 45 Seconds

From: Bradb
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

I'm new to simba can anyone tell me how to run a script,I have smart8 setup and the sample script works

Program testP07;

{$I SRL/SRL.Simba}
{$I P07Include.Simba}

//LOGIN INFO STUFF
Procedure P07_DeclarePlayer;
Begin
P07_PlayerName:='username';
P07_PlayerPass:='password';
End;

Begin

P07_DeclarePlayer;
SetupP07Include;
ActivateClient;
Wait(2000);
If (Not P07_LoggedIn) Then
P07_LogInPlayer;
P07_MakeCameraAngleHigh;
P07_MakeCompassNorth;

Writeln(P07_GetUpText);

If P07_BankScreen Then
WriteLn('Bank is Open');
If P07_InvFull Then
WriteLn('Inventory is Full');

End.

this is called an antileech, it's there to prevent people from leeching from the people who make this script for free in hope that the user will learn to script and make there own scripts helping the community. I'll give you a hint. how do you 'comment' in pascal?

Gets stuck in north-eastern corner of caves about every hour… gotten manually move myself to the middle

-* FightCaveTrainer v0.6
-*
-* Entered: 118
-* Runtime: 3 Hours, 26 Minutes and 39 Seconds

I have green hair Rune plate and legs and dragon scim on nothing else.
could it be mistaking the rune for the entrance?

From: Nanner
Ran 2 caves with no problems so far; my only quarrel with the script is that the mouse seems to be jumping around the player when in the caves, not a problem other than jagex can record mouse movements. Any reason for this or/and is this only happening to me?

Edit:
It also spams "We see the cave entrance!" in the simba debug.
Also, it doesn't click on the monsters, just waits to retaliate.

No, its not just you, it does the same for me. it keeps spinning the mouse around the player..
Also for people getting stuck - you get stuck with the 90s.. Dont wear full rune and you will die faster!!

ive done everything said, Put the file into Includes etc but still get this:

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

Halp.

-* FightCaveTrainer v0.6
-*
-* Entered: 51
-* Runtime: 3 Hours, 50 Minutes and 27 Seconds

From: skautas
Because it is color bot. It clicks on white color to enter the cave. In other words : remove and drop your fcking desert boots :P

Didn't consider that.. I'll just go ahead and stop wearing initiate.. :D

From: Anatomical
Sorry, I didn't know it was a rat link. I just saw the video and thought it was legit. Sorry if anyone downloaded it. I've removed the link

Thanks for removing it.

From: LynxS
this is called an antileech, it's there to prevent people from leeching from the people who make this script for free in hope that the user will learn to script and make there own scripts helping the community. I'll give you a hint. how do you 'comment' in pascal?

Says in this vid anti leech is against the rules http://www.youtube.com/watch?v=D2FeIwBVoFU ,I have no clue about scripting :/

From: Bradb
Says in this vid anti leech is against the rules http://www.youtube.com/watch?v=D2FeIwBVoFU ,I have no clue about scripting :/

Follow the instructions on OP

I've got the Simple Tzhaar fight script to load on Simba SMART. Once it logs into the account, it doesn't move, or do anything! :S I've even tried manually entering it into the caves, but once I die, it doesn't do anything in the screen after where the guy says "Well done, in the cave, here take TOkKul as reward".

Any suggestions?

From: Anatomical
I've got the Simple Tzhaar fight script to load on Simba SMART. Once it logs into the account, it doesn't move, or do anything! :S I've even tried manually entering it into the caves, but once I die, it doesn't do anything in the screen after where the guy says "Well done, in the cave, here take TOkKul as reward".

Any suggestions?

i have the same problem. anyone know a fix to it?

From: mr_shakazulu
i have the same problem. anyone know a fix to it?

Just figured it out thanks to BMW, make sure your brightness is set to max.

'One minute has passed… Debug: 0'
Then it types my name and password in the chat and starts running randomly help?

I just get this error

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

I followed all the instructions from the tutoriaL, all the tests works. and I DL'ed the include SLR-OSR from the OP post, i see someone else asked about this and they said anti-leech I have no idea what that means.

From: fearmybow
I just get this error

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

I followed all the instructions from the tutoriaL, all the tests works. and I DL'ed the include SLR-OSR from the OP post, i see someone else asked about this and they said anti-leech I have no idea what that means.

delete the (master) in the OSR name

thanks alot :D:D

Left it on over night and at college

-* FightCaveTrainer v0.6
-*
-* Entered: 212
-* Runtime: 16 Hours, 49 Minutes and 46 Seconds

nice script :)

'One minute has passed… Debug: 0'
Then it types my name and password in the chat and starts running randomly help?

Got me 9 def.

flawless OP

Ran flawless for 7 hours but towards the end somehow got my pure to 6 defence? any idea why?

-* FightCaveTrainer v0.6
-*
-* Entered: 567
-* Runtime: 17 Hours, 39 Minutes and 37 Seconds

Flawless.. thank you

I'm planning on making an army of bots for tzhaars in future. Might get stats up using this script :D

-* FightCaveTrainer v0.6
-*
-* Entered: 548
-* Runtime: 20 Hours, 42 Minutes and 5 Seconds

From: b0bs4g3t
delete the (master) in the OSR name

What you mean by that i get the same problem

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from '

Dont add the "SRL-OSR Master" folder, just extract the contents of that folder to the proper spot. i had the same problem.

From: firecape0wns
Dont add the "SRL-OSR Master" folder, just extract the contents of that folder to the proper spot. i had the same problem.

You actually rename the folder so that it doesn't have master in the name. (After extracting the zip to includes)

Oh i did it without the master folder, and my simba runs well, no errors and works with multiple scripts. Im slightly new to this, so i expect to make mistakes in the near future as i attempt to learn Simba/SRL coding.

sorry, I have a question.
how can I set this bot for me to logg itself back again for the 6 hour kick?

-* Entered: 43
-* Runtime: 2 Hours, 30 Minutes and 8 Seconds
Will use in the future for extended time. Thanks!

-* Entered: 83
-* Runtime: 5 Hours, 2 Minutes and 54 Seconds
went up about 4 str levels today thanks

From: phongboy
sorry, I have a question.
how can I set this bot for me to logg itself back again for the 6 hour kick?

You add an If not LoggedIn check at the start of the loop.

-* FightCaveTrainer v0.6
-*
-* Entered: 202
-* Runtime: 12 Hours, 24 Minutes and 42 Seconds

-* FightCaveTrainer v0.6
-*
-* Entered: 1104
-* Runtime: 38 Hours, 46 Minutes and 57 Seconds

Dammit my defence is too high to use this. They get stuck behind rocks and cant reach me anymore :(

Got a nice proggie and still going :)
-* FightCaveTrainer v0.6
-*
-* Entered: 77
-* Runtime: 5 Hours, 32 Minutes and 8 Seconds

i keep getting this?

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.

anyone know why?

sorry, new to simba :duh:

knck out I had the same problem…make sure to check for updates where it says SRL, SPS, and MSI it fixed it for me (I am also new)

Wow. This script is just amazing. Big vouch.

i did that when i first got it, and i just did it again…and i still keep getting the same error

anyone know why?

thanks in advance

hmmm it worked for me at first now it's doing it again. so now i'm confused lol.

I would love it if it added a prayer feature so pray melee if you have 43 pray. That would let people with low def last longer

i found my problem, i wasnt updated to smart 8, give that a shot. hope it works!

P.S script is great, flawless so far.

From: azaghul
why am i getting this?

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed.

From: i8i8i8i
I see I'm not the only one… =/

major issue i seriously need help, have never had any other issues with Simba before but i just seriously cannot work this out

Ran fine last night, Now whenever i start it up SMART is a white screen, Updated Java etc but to no avail.

Only script that is happening to.

We see cave entrance!!!!!!!!!!!!!!!!!!!!!!!!!

Do you think this script is safe with no Anti ban? Its basically afking the whole time.

Well it ran perfectly whole night but it trained me one def level, one attack level and three str levels? Is there anything I can avoid this? all I want is str levels?

Damn it got you def, that really blows! Glad I read that before I ran script lol..

ohh that sucks you got defence :( I feel really bad for you you can make a new accunt and start botting again what will you do now?? your account is ruin

whenever i run this script, smart is whitescreened but i can hear the music. other scripts work fine though.

that is really strange panda you have Java 6 ?

no i have the latest version of java 7.

very good script.
had to log in just to say this :D


noobman approves!

is this the longest proggy?

From: imhigh
Well it ran perfectly whole night but it trained me one def level, one attack level and three str levels? Is there anything I can avoid this? all I want is str levels?

Damn that sucks, I hope I don't get any def levels lol.
What equipment were you using?

[Error] C:\Simba\Scripts\simplefightcave.simba(17:3): Unknown identifier 'HowManyPlayers' at line 16
Compiling failed.





program FightCaveTrainer;

{$DEFINE SMART}


Const
caveTol = 2;
version = '0.6';

Var
counter, caveEntrances: Integer;
caveEntranceWhite: TIntegerArray;

Procedure DeclarePlayers;
Begin
HowManyPlayers := 1;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;

Players[0].Name := '';
Players[0].Pass := '';
Players[0].Nick := '';
Players[0].Active := True;
End;

Function FightCaveSleep(sleepx, sleepy: Integer; retaliate: Boolean): Boolean;
Var
x , y, sleepTime: Integer;
loop : Boolean;
Begin
loop := true;
counter := 0;
sleepTime := RandomRange(sleepx, sleepy);
While loop Do
Begin
If FindObjCustom(x, y, [' '], caveEntranceWhite, caveTol) Then
Begin
Result := false;
loop := false;
WriteLn('We see cave entrance!');
End Else If (not (InRange(Length(GetFightBarTPA(IntToBox(MSX1, MSY1, MSX2, MSY2))), 30, 150))) and (retaliate) Then
Begin
Result := false;
loop := false;
End Else If (sleepTime - counter > 0) and loop = true Then
Begin
wait(10);
counter := (counter + 10);
End Else
Begin
Result := True;
loop := False;
End;
End;
End;

Procedure FightCaveLoop;
Var
x, y : Integer;
Begin
If FindObjCustom(x, y, ['nter'], caveEntranceWhite, caveTol) Then
Begin
WriteLn('Found correct cave!');
ClickMouse2(True);
While FindObjCustom(x, y, ['nter'], caveEntranceWhite, caveTol) Do
Begin
ClickMouse2(true);
Wait(RandomRange(500, 1000));
End;
If RandomRange(1, 10) > 8 Then
Begin
SetRun(true);
GameTab(tab_Stats);
End;
caveEntrances := (caveEntrances + 1);
WriteLn('Entered cave.');
ClearDebug;

WriteLn('-* FightCaveTrainer v'+version);
WriteLn('-* ');
WriteLn('-* Entered: ' + intToStr(caveEntrances));
WriteLn('-* Runtime: ' + TimeRunning);

Wait(RandomRange(4000, 5000));
SetAngle(0);
End Else
If (Not FindObjCustom(x, y, ['nter'], caveEntranceWhite, caveTol)) and (CountDots('yellow') > 0) Then
Begin
FightCaveSleep(200,500,False);
If InRange(Length(GetFightBarTPA(IntToBox(MSX1, MSY1, MSX2, MSY2))), 30, 150) Then
Begin
If (FightCaveSleep(3000,5000,True)) Then
Begin
If InRange(Length(GetFightBarTPA(IntToBox(MSX1, MSY1, MSX2, MSY2))), 30, 150) Then
Begin
Retaliate(False);
Wait(RandomRange(500,700));
Retaliate(True);
GameTab(tab_Stats);
FightCaveSleep(3000,5000,False);
End;
End;
End;
End Else MakeCompass(185);
End;

Begin
SetupSRL;
DeclarePlayers;
SetRun(True);
GameTab(tab_Stats);
caveEntranceWhite := [7763583, 8553356];
MouseSpeed := 15;

While(True) Do
Begin
If not LoggedIn Then
Begin
LogInPlayer;
SetRun(True);
GameTab(tab_Stats);
MakeCompass(185);
SetAngle(0);
End;
FightCaveLoop;
End;
End.

my script been trying for hours

FightCaveTrainer v0.6
-*
-* Entered: 76
-* Runtime: 12 Hours, 1 Minutes and 34 Seconds

Wow …

I just woke up and had 28 firecapes in my inventory!!!

Thanks man :spot:

From: rebeltjeh
Wow …

I just woke up and had 28 firecapes in my inventory!!!

Thanks man :spot:

And your tokkul just magically dissapeared? :)

From: Anatomical
Damn that sucks, I hope I don't get any def levels lol.
What equipment were you using?

Well Im a zerker had rune full helm plate legs and d scimmy etc.

-* FightCaveTrainer v0.6
-*
-* Entered: 142
-* Runtime: 9 Hours, 33 Minutes and 4 Seconds

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''


i downloaded the folder that u said but where do i need to extract it in? pleas help !


can u pleas say what i need to extract and where kinda new at this

From: pandakid
whenever i run this script, smart is whitescreened but i can hear the music. other scripts work fine though.

idk why I got the same thing you just have to start smart on its own with another script then run this one.

Otherwise its a great script been running it for a while now and have had no problems with anything except a inventory full of mystery boxes.

-* FightCaveTrainer v0.6
-*
-* Entered: 545
-* Runtime: 12 Hours, 41 Minutes and 25 Seconds

From: noobman
very good script.
had to log in just to say this :D
http://i46.tinypic.com/o9pydk.jpg


noobman approves!

is this the longest proggy?

Hope you're still running, because I am :P

-* FightCaveTrainer v0.6
-*
-* Entered: 1375
-* Runtime: 39 Hours, 40 Minutes and 53 Seconds



Gone from 68-74 str on my 40 attack pure, no defence levels or anything, has run flawlessly.

why do I get that identifier expected at line 3 error

Almost at 100k tokkul.. How much are uncut onyx/fury ammies going for nowadays?

Exctract it in simba/includes ;)

Very nice script, leveled my attack, stength and defence to 60.

-* FightCaveTrainer v0.6
-*
-* Entered: 176
-* Runtime: 21 Hours, 9 Minutes and 1 Seconds

From: hi own
[Error] C:\Simba\Includes\SRL-OSR/SRL/core/text.simba(805:13): Unknown identifier 'UpChars07' at line 804
Compiling failed.

How did you fix this? I get the same error.

EDIT:Fixed. Derped out on the 07fonts, didn't extract them properly.

cheers =] [ATTACH=CONFIG]20310[/ATTACH]

over 40 hours. Still cant believe how great this script is working!

Awesome Script, my current proggy: (Still running)

FightCaveTrainer v0.6
-*
-* Entered: 54
-* Runtime: 6 Hours, 21 Minutes and 33 Seconds

From: rebeltjeh
Wow …

I just woke up and had 28 firecapes in my inventory!!!

Thanks man :spot:

Well this is bs..

i would love to use this but i am getting this & yes i installed everything correctly. i am currently running aio fighting bot..in smart version where i can minimize it. so hopefully the steps in installing was not the issue…

"Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from '' "

any help would be greatly appriciated :)

From: Noorullah
i would love to use this but i am getting this & yes i installed everything correctly. i am currently running aio fighting bot..in smart version where i can minimize it. so hopefully the steps in installing was not the issue…

"Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from '' "

any help would be greatly appriciated :)

http://villavu.com/forum/showthread.php?t=99577

i did that but b4 that
i changed the 2nd line to this: "{$i srl\srl.simba}"

& the bot started running…… but now its not entering the cave…is it cuz i changed the code or something else?


after i followed the steps in that tutorial…i got parameter error

I wouldnt mess with the code lol

well…the thing u told me…to go to zip and download & extract it and change file name did not work….

gave parameter issue

Is there a reason I'm getting a white screen when I load this script up?

Idk noorullah, I'm new with this stuff as well and I didnt mess with the scripts when I get that problem, just followed exactly what the link said and it worked for me.

Great script ran for over 7 hours and worked flawlessly, got me over 10 str and 8 hit

[ATTACH=CONFIG]20318[/ATTACH]

Any know how to fix the white screen problem? My other scripts work, just doing it on this one?

I have everything right, I downloaded the SRL-OSR-master and renamed it to SRL-OSR and put it in the includes folder, I've downloaded the fonts and put them where they should be, I have the 07 include, and II have smart 8. All it does is login, click stats, move camera all the way up, and stand there.

I even reinstalled my entire simba with everything and its still not working.

is this right http://pastebin.com/SCuzE3Sn

tryed for hours lol

From: KingReset
I have everything right, I downloaded the SRL-OSR-master and renamed it to SRL-OSR and put it in the includes folder, I've downloaded the fonts and put them where they should be, I have the 07 include, and II have smart 8. All it does is login, click stats, move camera all the way up, and stand there.

I even reinstalled my entire simba with everything and its still not working.

For anyone else having this problem, i figured out what was wrong lol.

Make sure you have your brightness up ALL the way. This fixed it for me :)

You're welcome.

Yeah fk this script it trains all statses, i was supposed to be zerker but not any more when my def went 48 and attack 62, what is wrong with this? It swaps the combat styles to fking lunge etc. Wouldnt recommend use as pure

this gets stuck during a certain number of waves it just stands in the southeast corner and the monsters dont come out unless you go to the center

Theres nothing wrong with the script if you having troubles its your comp or you have failed something, ran for me like 30hours combo expect it fuking swaps the fight styles to defence, attack etc. Do not use as a pure.

Been runnin flawless.

Entered: 599
-* Runtime: 23 Hours, 11 Minutes and 31 Seconds

Edit: I'm still 0 exp in def. 50 atk 67 str. ONLY trains str for me. Doesn't switch

Have u gotten Only One skill ? or has it trained any other skills like def attack etc? am i only one having this problem that it does swtich those attack styles?

From: imhigh
Have u gotten Only One skill ? or has it trained any other skills like def attack etc? am i only one having this problem that it does swtich those attack styles?

Only been training str for me. Unless this isnt the fight caves script im using and I went to the wrong thread. let me investigate.

Edit: Yup this is the script I'm using. ran over 24 hours and hasnt swapped attack styles.. I've only used a rune scim. and have auto on.

From: verizonhorizon
Only been training str for me. Unless this isnt the fight caves script im using and I went to the wrong thread. let me investigate.

Edit: Yup this is the script I'm using. ran over 24 hours and hasnt swapped attack styles.. I've only used a rune scim. and have auto on.

Really why in the hell it does that for me, I start with d scim, slash style, and auto on. Trains str for like 6 hours maybe and then suddenly attack style is swapped to lunge wich is shared exp… My account if fucked now..

That sucks man, im not sure why it does that. Barrows pures can be fun though. :P

I guess that i have to go for that…..then..

Been running for some time now still going strong, been switching stance myself, haven't had any problems, Great Work :)


-* FightCaveTrainer v0.6
-*
-* Entered: 371
-* Runtime: 24 Hours, 13 Minutes and 22 Seconds

From: imhigh
Really why in the hell it does that for me, I start with d scim, slash style, and auto on. Trains str for like 6 hours maybe and then suddenly attack style is swapped to lunge wich is shared exp… My account if fucked now..

Doesnt do that to me. Quest it up and make a low levelled zerker, theyre OP in 07scape

[Error] C:\Simba\Includes\SRL-OSR\SRL\misc\SmartParams.Simba(35:7): Unknown identifier 'Smart_World' at line 34

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228

Script is just a beauty tbh. <3

This script laggs a lot for me. I used to use the WBot one and it worked perfectly.

Any idea why this laggs for me? I cant use it because I get loading please wait and it just spases out a lot although the script works well before it does this.

From: marcbot
this script laggs a lot for me. I used to use the wbot one and it worked perfectly.

Any idea why this laggs for me? I cant use it because i get loading please wait and it just spases out a lot although the script works well before it does this.

someone made a thread just now about scripts lagging on 07 i think either you are the same person or you might have similar issues. Please check out what he wrote + vote on the poll :o

sorry for crazy caps i cant seem to figure out how to turn em off right now

It just stands and doesn't move in the fight cave? I have auto-retaliate and I assume this is how it's supposed to train? It doesn't click attack on the monsters?

I have used this for many hours, longest session was 8hrs 41 mins. I have gained 21 str lvls and not gained any attack or def lvls, so even if its on a shared xp, after the time ive used it would have gained me one. Maybe you guys have lagged badly and its switched styles by accident?? No clue.

-* FightCaveTrainer v0.6
-*
-* Entered: 134
-* Runtime: 10 Hours, 35 Minutes and 28 Seconds

Wow, so many 24+ hr progress reports! Script is simple, yet so stable, love it :)

Suggestion; Add some anti-ban while it's sleeping in the cave (Manually added to my script)

On the 3/4th wave of the level 90, it seems to go into the corner to retaliate to the level 90, and on the next round it will just idle there. To solve this (if you have high defence and can last up to then), you should always only wear strength bonus armour, and take off all rune and dragon armour, so you will die on the first or second round of level 90's. Happened to me, not sure about others.

First post , well deserved for this topic. Great script.

To the people changing combat styles, I think it has to do with the bot turning auto retaliate on and off and miss clicking controlled or defensive. I had it happen to me when I woke up this morning (luckily I am not a pure so I don't care) but I removed the part of the code that swaps auto retaliate on and off and will see if it changes anything.

when i try to run the script is says

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

how do i run it? it doesnt login for me


Nvm i figure it out.

Nice Work Bro, Will Test It Out Shortly :D

It got me defence aswell lol. I just removed the auto retaliate part too, scripts runs flawlessly.

Should add a walk to center failsafe, was stuck in corner.

-* FightCaveTrainer v0.6
-*
-* Entered: 577
-* Runtime: 45 Hours, 7 Minutes and 22 Seconds

I've entered my username/pass/display name and when i try to start it i get this:

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.

any help would be appreciated! thanks :)

EDIT: figured it out, just re-installed SMARTv8.0 and it worked.

[ATTACH=CONFIG]20351[/ATTACH]FightCaveTrainer v0.6
-*
-* Entered: 2330
-* Runtime: 81 Hours, 20 Minutes and 28 Seconds
We see cave entrance! best script ever still running strong.

From: names eric
[ATTACH=CONFIG]20351[/ATTACH]FightCaveTrainer v0.6
-*
-* Entered: 2330
-* Runtime: 81 Hours, 20 Minutes and 28 Seconds
We see cave entrance! best script ever still running strong.

DAMN! how much xp have u gotten?

1-77 str

-* FightCaveTrainer v0.6
-*
-* Entered: 1652
-* Runtime: 42 Hours, 4 Minutes and 55 Seconds

still running xD thnks bro! working amazingly

Nice Work Bro, Really Love The Script <3!

-* Entered: 182
-* Runtime: 6 Hours, 33 Minutes and 24 Seconds
Went From Lvl 62-65
Stats= 60/1/65 Att/def/str

Working great so far. Almost a 34 hr proggy!

From: vortexz
this script is mad retarded lol.

All it does technically is enter the fight caves and thats it. Then it allows the autoretaliate to do all the work. What a bullshit piece of work because it gets stuck when you spawn where monsters don't come to you

Vortexz, that kind of language and criticism is not appreciated. If it was my script, I would feel terrible. 1. The title says SIMPLE. 2. That kind of response is unacceptable 3. The point of the script is just to do that. THis script has been here for a while 4. Rude Comments wont get you anywhere. 5. At least he put the effort to make something. 6. He is a member that is much more respected than you.

Not to be mean to you, but I will stand up for the script writer and this community.

xp/hr would be nice if u cpuld add :D

From: Physic
Vortexz, that kind of language and criticism is not appreciated. If it was my script, I would feel terrible. 1. The title says SIMPLE. 2. That kind of response is unacceptable 3. The point of the script is just to do that. THis script has been here for a while 4. Rude Comments wont get you anywhere. 5. At least he put the effort to make something. 6. He is a member that is much more respected than you.

Not to be mean to you, but I will stand up for the script writer and this community.

Agreed. I'm quite grateful someone made a decently working script. I wish I knew more about programming, I'd like to add some prayer support, or range support that will attack the monsters as they are still walking towards you (not sure if it would even work on a color based bot, especially since the floors in the fight caves blend in so well with the npcs)

From: ZeroGravity
To the people changing combat styles, I think it has to do with the bot turning auto retaliate on and off and miss clicking controlled or defensive. I had it happen to me when I woke up this morning (luckily I am not a pure so I don't care) but I removed the part of the code that swaps auto retaliate on and off and will see if it changes anything.

Thank you for the tip. So theres in script only in one part : Auto "false" and auto "true" so I just have to delete those two lines?

From: Physic
Working great so far. Almost a 34 hr proggy!

there are some people posting some pretty crazy long proggies, saw one earlier that was 81 hours. Is jagex banning people in 07rs for botting? I imagine any halfway decent software could flag an account thats been logged in for so long fairly easily…

Very nice and flawless script used it last night for 13 hours long! Thank you very much for making it :)

I think it gets to me that one of the only movements on the script is one that can get you into a corner (rendering your account useless/hugging the monster as it doesn't do anything unless you're actually being attacked).

Besides that thanks for the script.

Can someone help me, im getting this error

[Error] C:\Simba\Includes\SRL/SRL/core/login.simba(738:3): Unknown identifier 'SetScreenName' at line 737
Compiling failed.

From: Snaertis
Can someone help me, im getting this error

[Error] C:\Simba\Includes\SRL/SRL/core/login.simba(738:3): Unknown identifier 'SetScreenName' at line 737
Compiling failed.

did you fill out the first few lines where you need to insert your login username, password, and display name?

From: vigilante123
did you fill out the first few lines where you need to insert your login username, password, and display name?

Yes i did :)

From: Snaertis
Can someone help me, im getting this error

[Error] C:\Simba\Includes\SRL/SRL/core/login.simba(738:3): Unknown identifier 'SetScreenName' at line 737
Compiling failed.

You didn't install the OSR include correctly. You NEED to use the OSR include for this to work

From: Justin
You didn't install the OSR include correctly. You NEED to use the OSR include for this to work

Aww sh*t i spent like 15min to do it so i didnt f*ck up… ahwell. ill start over :) Thanks for the fast reply.

what are the minimum level suggestions for the fight caves? Currently have a 21/20/20 account that I am just dying to start botting on lol.

[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.

Can anyone help?

From: Username01
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed.

Can anyone help?

I had the exact same problem. You need to install SMARTv8. There is a guide on the forums, just search "SMARTv8" on the search bar.

-* FightCaveTrainer v0.6
-*
-* Entered: 697
-* Runtime: 21 Hours, 8 Minutes and 26 Seconds

I haven't had a single problem with this!
Simple, yet effective!

The bot gets stuck outside and doesn't move, sometimes it goes to a white screen, and sometimes it goes to the stat tab. I'm wearing no white.

-* FightCaveTrainer v0.6
-*
-* Entered: 1189
-* Runtime: 38 Hours, 22 Minutes and 4 Seconds

From: t3hl33tn00b
what are the minimum level suggestions for the fight caves? Currently have a 21/20/20 account that I am just dying to start botting on lol.

^^
Suggested levels?

"
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed."


:(… i was having a previous issue of unable to find SRL-OSR etc, and i used this guide: http://villavu.com/forum/showthread.php?t=99577

renamed the file. is any1 else having this issue?

-* Entered: 3544
-* Runtime: 243 Hours, 8 Minutes and 49 Seconds

Tyvm :)

damn boy got 15 def levels from 40-55 in one night and din't even been stuck or die outside thanks boyy

"
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed."

quite sure, i installed Smart…i am currently using a diff script which i opens it's own "browser" when i run script and allows to minimize….what am i doing wrong :(

From: Noorullah
"
[Error] C:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(229:203): Invalid number of parameters at line 228
Compiling failed."

quite sure, i installed Smart…i am currently using a diff script which i opens it's own "browser" when i run script and allows to minimize….what am i doing wrong :(

Change {$DEFINE SMART} to {$DEFINE SMART8}

that did not help :(

:(((((((((( really really want to use this script, have spent many hours trying to get it work. i feel like i'm really close

From: Noorullah
that did not help :(

:(((((((((( really really want to use this script, have spent many hours trying to get it work. i feel like i'm really close

Reinstall Simba from scratch

where do i enter in my username and password in the script

Line 20 and 21.

-* FightCaveTrainer v0.6
-*
-* Entered: 137
-* Runtime: 10 Hours, 53 Minutes and 3 Seconds

sometimes the monster gets tuck behind italy rock and my character stands there and afks and doesnt log out. because it works by retailiate youre character just stands there and does nothing for hours

From: Xdante
sometimes the monster gets tuck behind italy rock and my character stands there and afks and doesnt log out. because it works by retailiate youre character just stands there and does nothing for hours

If Auto-Retaliate is on, shouldn't you run to the NPC?

the npc is behind italy rock so it cant get to you
so basically what happens is the ranger spawns, then u run to the ranger and the other monster follows you and the ranger is in the corner
so whn u kill the other monsters, the next wave spawns but if something spawns on the toher side of italy rock, the character will just stay where it is and do nothing

removed

You guys have to add a failsafe so it walks to the middle if the monsters are bugged.

Yes i have the same problem. Script got me from Strength 30 to 77 but since i get to further waves it often gets stuck. My idea is to take off some armour that i don't get too far in waves but a failsafe would be better

From: Xdante
http://gyazo.com/b1246f3f55dec0d43e7c5277b3161ae1 <—Just happened again

wow at least censore ur name or smth…now everyone knows u bot lol

is it that hard for the scripter to just put in a script that makes in move around when not attcked for a certain number of seconds/minutes

All you people that QQ's about monster being stuck and etc. Just add your login info in the script and once your character gets stuck, it will log out after 5 minutes and then login and start once again. No need to remove gear and gimp your xp/h..

-* FightCaveTrainer v0.6
-*
-* Entered: 527
-* Runtime: 17 Hours, 22 Minutes and 39 Seconds

Wow, Used this and got keylogged… Nice work! u just received dragon scimitar!

It won't click on the cave entrance for me :( help?

EDIT: found the solution (*facepalm*) didn't have brightness to max…

Will post proggy later

[ATTACH=CONFIG]20373[/ATTACH]

bots been running
FightCaveTrainer v0.6
-*
-* Entered: 2947
-* Runtime: 101 Hours, 23 Minutes and 16 Seconds
Best ive ever seen

wow nice, how much str levels did you gain?


also;

lvl 79 str almost 80

Guys when i run this script it pops up like it should but then the login is all white.

i did this :

"Go to https://github.com/SRL/SRL-OSR
Hit the ZIP button near the top
download the .zip
Browse to your Simba/Includes folder
make a "SRL-OSR" Folder!
extract contents of ZIP into the folder you just made"

please someone help first time im using a SRL-OSR script

EDIT: Other scripts working but not this one help guys also i can hear the runescape music :(
EDIT2: picture of the problem: http://oi46.tinypic.com/1zco41e.jpg

From: qyouwei
wow at least censore ur name or smth…now everyone knows u bot lol

thanks i forgot can ou please remove this post

Yes it works with smart8 and goddamn I love this script, thank you! If I could donate to scripter I would, thanks m8!

i am a noob, cam someone Explain to me how to get past a problem

i was using the po7 include by danny
#Downloaded the SRL-OSR include
Copied the entire download contents to C/simba/includes/Srl

I downloaded the fonts from , http://villavu.com/forum/showthread.php?t=98324
copied them to fonts.

when i run the script i get this
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

now im guessing i installed the include wrong
but i cant find a guide on how to install it properly

please help

How do you 1def pures cope?
I seem to die very quickly.

From: Blazedragun
i am a noob, cam someone Explain to me how to get past a problem

i was using the po7 include by danny
#Downloaded the SRL-OSR include
Copied the entire download contents to C/simba/includes/Srl

I downloaded the fonts from , http://villavu.com/forum/showthread.php?t=98324
copied them to fonts.

when i run the script i get this
Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

now im guessing i installed the include wrong
but i cant find a guide on how to install it properly

please help

Rename the folder "SRL-OSR-Master"
to "SRL-OSR"

-* FightCaveTrainer v0.6
-*
-* Entered: 433
-* Runtime: 10 Hours, 28 Minutes and 11 Seconds

With my pure….

and

-* FightCaveTrainer v0.6
-*
-* Entered: 101
-* Runtime: 9 Hours, 27 Minutes and 11 Seconds

with a zerker… ( well failed zerker) but If u have rune gear and d scim it get stuck in the north corner or what ever it is and stays there for hours… Just noticed that at couple nights of botting



By the way I highly recommend to take off the auto retalite part off from the scrip if you're a pure even tough it hasnt failed your def yet.

My SMART 8.0 loaded and it got me to the login screen but the bot couldn't even click in existing user. When i clicked on it, the bot types in my username and pass but then can't click on the 'CLICK HERE TO PLAY' button. When i click on this button it just doesn't move ingame and even tries typing my username and password..

SOMEONE PLEASE HELP

Do i need to add something to the script? Im quite new to simbabotting btw, hopefully someone knows how to solve my problem!

This does not work with the latest srl-osr
i get compiling error C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
please fix

Added antirandoms before the click cave loop, absolutely flawless now hah.

Can anyone tell me what part of the script I need to remove so it doesnt even go into the auto retaliate tab…. Dont want it anywhere near the shared exp option lol

[Error] C:\Simba\Includes\SRL-OSR/SRL/core/flag.simba(96:20): Unknown identifier 'bmpMinimapMask' at line 95
Compiling failed. i got this..

k whenever i start the bot sometimes it will enter the cave and just stand there and not move..im not quite sure what the problem is someone please help, it did work flawlessly for about 50 hours of use but now it does this a lot..pretty annoying.. :(

I get this error

[Error] (1:1): period ('.') expected at line 0
Compiling failed.

What do I do?

-* FightCaveTrainer v0.6
-*
-* Entered: 549
-* Runtime: 15 Hours, 13 Minutes and 47 Seconds

Nice. Anyone know how to get rid of the auto retaliate?

when i start , it just stands there?

From: dannygem
-* FightCaveTrainer v0.6
-*
-* Entered: 549
-* Runtime: 15 Hours, 13 Minutes and 47 Seconds

Nice. Anyone know how to get rid of the auto retaliate?

Auto-retaliate part was made to toggle auto-retaliate when there is only 1 hp bar for more than 3-5 seconds (Just in case it wasn't working, toggling seems to fix it)
I can't imagine why you'd want to remove it.

From: btax420
when i start , it just stands there?

Set brightness to max.

I got told to get rid of the 'auto retaliate line' to make sure I didn't get def exp, idk so far I haven't gained any def exp but I was just wanting to do it as a precaution as others on this post were discussing about it and it got me a bit worried.

How would you make it stop getting stuck in the rocks due to the level 90's pulling you towards there? :o

Over 2m Xp using this in 5 days. HA. And to make the 90s stop luring you to a safespot, dont wear armor. Simple. You dont gain much more EXP/h wearing armor.

Thanks for the tip, man - I'll check it out. ^^

Alright, theres one fail at the script when your enough high level to go more waves until the rangers, it has the auto retalite on and at some point the rangers spawns to the corners and then the account just runs to the corner to kill the ranger and then it gets to stuck there because it wont run to middle or anything..

i did that.. still not working ?

Yeh so take your armor off so that you dont make it as far.. if that doesnt work use a shittier weapon. cmon guys…

retracted

-* FightCaveTrainer v0.6
-*
-* Entered: 220
-* Runtime: 6 Hours, 1 Minutes and 17 Seconds

This script is Flawless! (testing on a pure) i dont get too far through the cave

love this script, i ran out of knives, so it started kicking and got my up 3 strength levels too! aha!

Thanks dude!

nvm

Amazing script!

-* FightCaveTrainer v0.6
-*
-* Entered: 728
-* Runtime: 20 Hours, 18 Minutes and 50 Seconds

Still going. Got me 6 strength levels at 1 def.

-* FightCaveTrainer v0.6
-*
-* Entered: 359
-* Runtime: 9 Hours, 32 Minutes and 57 Seconds
Running on a 40 att pure

Flawless man love it!

-* FightCaveTrainer v0.6
-*
-* Entered: 700
-* Runtime: 20 Hours, 49 Minutes and 11 Seconds


:)

Working good atm ill edit if i find a bug or something , thanks for the script tho ^^

From: painpiller
Wow, Used this and got keylogged… Nice work! u just received dragon scimitar!

Obvious troll is obvious sir 1 post.

Flawless script man! Love it, was on vacation 5 days and the script did work all the time! :)
My proggy:

-* FightCaveTrainer v0.6
-*
-* Entered: 1088
-* Runtime: 113 Hours, 31 Minutes and 52 Seconds


Picture:[ATTACH=CONFIG]20407[/ATTACH]

From: Chabbis1
Flawless script man! Love it, was on vacation 5 days and the script did work all the time! :)
My proggy:

-* FightCaveTrainer v0.6
-*
-* Entered: 1088
-* Runtime: 113 Hours, 31 Minutes and 52 Seconds


Picture:[ATTACH=CONFIG]20407[/ATTACH]

Nice! Lucky you didn't get a random.

it logs in fine for me and moves the camera but then it just stands there and does nothing, it doesn't enter the cave, wat do?

Exception in Script: Unable to find file 'SRL-OSR/Srl.simba' used from ''

I'm getting this, help please

Worked Flawlessly until other players were able to lure me away from cave entrance and then it just stood there and logged out.

edit: trying your new patch, will post results after 6 hour proggy

It trained my defence while training range. 45-49 :(. Luckily It wasn't when I ran it overnight. I've seen it change to longrange twice now so Pures, beware.

From: DannyDee
It trained my defence while training range. 45-49 :(. Luckily It wasn't when I ran it overnight. I've seen it change to longrange twice now so Pures, beware.

Got 52-70 range did't change for me,do you lagg while botting might be the reason

-* Entered: 561
-* Runtime: 41 Hours, 33 Minutes and 8 Seconds

Thanks!

I think the switching of attack styles happens if you disable and enable smart, I got 45-51 overnight after messing with smart to see my progress. In the 41 hour run pasted above, I left smart alone and it never changed.

No ones scared of getting banned for botting here for long periods of time (10+ hour proggies) ?

Just curious because I only let it run for 5-8 hours and stop, make it less skeptical, heard this is going to have a high ban rate

From: jeffles
No ones scared of getting banned for botting here for long periods of time (10+ hour proggies) ?

Just curious because I only let it run for 5-8 hours and stop, make it less skeptical, heard this is going to have a high ban rate

Down the road maybe Jagex will start. But again not 100% sure :p

-* FightCaveTrainer v0.6
-*
-* Entered: 160
-* Runtime: 11 Hours, 31 Minutes and 44 Seconds

Starts opening multiple client for me then the one which im botting on atm stop working
WARNING: Your nickname isn' found in the players name with player: ******
is this the problem? if so how do i fix

Good script, definitely the script I use the most on 07.

Im sure its been asked but is it possible to get the exp/hr rates? Not sure if its possible for combat.

[ATTACH=CONFIG]20422[/ATTACH]

136 hour and still going this script is the best i have gotten 145k tokul half way to the onyx
1-81 str and still going

FightCaveTrainer v0.6
-*
-* Entered: 3980
-* Runtime: 136 Hours, 30 Minutes and 4 Seconds

Got me a few levels but ive also died twice using it. be careful what you bring :\
edit* Both of the times that I have died I re-log to find cabbage/cabbage seeds in my inventory.. weird

Just remember to take breaks, This is heavily botted and I guess it's on Jagex's watch list.

found a glitch, as i am making a staker, i survive to about the third wave of the 90's and defeat it with a little health left, and as the 90's spawn in the corners primarily, after killing it, my character stays there and its a safe spot which prevents the other npc's from reaching me.

The auto retaliate only works if the npc is on you, not if it cant reach you.

As a fix, you could add a timer to automatically move your character back to the middle of the fight caves if your character remains still for 3+ minutes?

NOTE: it only happens once every 2-3 hours

Yea i have the problem with standing it in the corner and doing nothing untill you move it urself.
Yesterday i ran it for 5 hours and it logged me out when i was in a corner, but now it doesn't logout aswell..

anyone know how to solve this?

From: inside
found a glitch, as i am making a staker, i survive to about the third wave of the 90's and defeat it with a little health left, and as the 90's spawn in the corners primarily, after killing it, my character stays there and its a safe spot which prevents the other npc's from reaching me.

The auto retaliate only works if the npc is on you, not if it cant reach you.

As a fix, you could add a timer to automatically move your character back to the middle of the fight caves if your character remains still for 3+ minutes?

NOTE: it only happens once every 2-3 hours

What I did was use less armor and die in first wave so you dont have to get stuck. works flawless that way

Great script but please fix:
- Getting stuck in the corners due to lv 90 ranger's dragging you via Auto-Retal (I have no armour on - you get to a point where you still get stuck)
- Script misclicking on settings (IE: Turning music volume on etc and changing attack style) => Could be alleivated by uploading a version with less anti-ban; no clicking on settings, stats or combat menu and just staying @ inventory.

Otherwise thanks for you work! :)

Could have kept it running forever, I stopped it just cause I wanted to give my pc a chance to rest. Now it's morning so we're back to bussiness ;D

-* FightCaveTrainer v0.6
-*
-* Entered: 181
-* Runtime: 15 Hours, 59 Minutes and 38 Seconds

How much exp per hour is this actually?

[Error] E:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(241:157): Invalid number of parameters at line 240
Compiling failed.

Anyone got any idea how to fix? i tried the newest SmartParams, nothing happened

From: swag4life
[Error] E:\Simba\Includes\SRL-OSR/SRL/misc/SmartParams.Simba(241:157): Invalid number of parameters at line 240
Compiling failed.

Anyone got any idea how to fix? i tried the newest SmartParams, nothing happened

Change {$DEFINE SMART} to {$DEFINE SMART8}

From: Justin
Change {$DEFINE SMART} to {$DEFINE SMART8}

Tried that already, didn't work

Edit: This bot worked perfectly for me before and only did this yesterday

Got me 60-80str this script fken rocks, although since it's a pretty simple script anyways you should think about having an xp/h proggy as well as the time running etc

-* FightCaveTrainer v0.6
-*
-* Entered: 1790
-* Runtime: 48 Hours, 43 Minutes and 42 Seconds
Phenomenal Script

[Error] C:\Simba\Includes\SRL-OSR.simba(46:3): Unknown identifier 'SRL_CombatRandoms' at line 45 what did I do wrong?

-* FightCaveTrainer v0.6
-*
-* Entered: 1424
-* Runtime: 32 Hours, 23 Minutes and 12 Seconds

so good.

Complitely flawless:

-* FightCaveTrainer v0.6
-*
-* Entered: 200
-* Runtime: 15 Hours, 22 Minutes and 13 Seconds

-* FightCaveTrainer v0.6
-*
-* Entered: 472
-* Runtime: 13 Hours, 4 Minutes and 10 Seconds

-* FightCaveTrainer v0.6
-*
-* Entered: 340
-* Runtime: 24 Hours, 19 Minutes and 17 Seconds

Ty great bot

From: adbd6
it logs in fine for me and moves the camera but then it just stands there and does nothing, it doesn't enter the cave, wat do?

Check your brightness, and make sure its on the second dot.

-* FightCaveTrainer v0.6
-*
-* Entered: 289
-* Runtime: 18 Hours, 18 Minutes and 33 Seconds

Amazing script! No errors.

I found a bug it stops in one place [ATTACH]20435[/ATTACH] I marked it

-* FightCaveTrainer v0.6
-*
-* Entered: 657
-* Runtime: 19 Hours, 12 Minutes and 47 Seconds

Baws script, 48-61 str on a pure.