SRL Archive - RS3 Outdated / Broken Scripts

It's a pretty simple script it chops the maple trees north of seers bank. Start either in seers bank or next to the trees. This script has a few bugs. My standards suck and it need failsafes.

• no anti leech
• You will need the unofficial 2007 include
• make sure you are facing north and camerea is angle medium
• setting the camera angle at beggining doesn't always work
• if you're having problems finding trees change the maplefind variable
• the antirandom only finds the tree with red eyes and mouth
• if the antirandom causes problems set the variable antirand to false

status:buggy

feel free to use any of my code



v.04 will most likely be the last version I upload it hasn't been tested as I no longer have an account for 07. If v.04 doesn't work i'll delete this thread.

ill test it

as well

I'll test it out today.

okay so there is a few things i noticed already, it has very little patience cutting a single tree, people will start suspecting as you run from tree to tree every 10 seconds.
I need to assist it with banking, it has a weird fetish of running to the anvil west from the bank.
All in all it's a nice script, but it needs some improving.

From: sorsapg
okay so there is a few things i noticed already, it has very little patience cutting a single tree, people will start suspecting as you run from tree to tree every 10 seconds.
I need to assist it with banking, it has a weird fetish of running to the anvil west from the bank.
All in all it's a nice script, but it needs some improving.

im having problems using pixel shift to see if it is currently chopping im gonna try to do something with ATPA's for that. Banking works best if your facing north and camerea at medium or high. I haven't had a problem with walking to the anvil try lowering the tolerence on on bankicon or maple icon from 8 to 6, the icon colors change slightly everytime you log in.

what do i need to do to reduce the amount of tree switching

Check PM!

//in maple use cntr+f
wait(randomRange(7000,12000));    //this is how long it waits before searching for a new tree 7-12 second now

//in main loop
 while(not ismoving2) do //this line was commented out but it might work a little bit better
    while(not P07_invfull) do
       maple;               

try changing these. Are banking and walking working better for you?

no better at all, actually now it has a new symptop, no matter where i am it goes to the bank next to the ladder.

From: Finiahmad
Check PM!

thanks i removed them when i uploaded the first version. it's just a trial account someone got some maple logs and a broken addy axe

From: bob_saget
thanks it's just a trial account someone got some maple logs and a braken addy axe

Oh okay, script looks good btw, ill test it later :)

From: sorsapg
no better at all, actually now it has a new symptop, no matter where i am it goes to the bank next to the ladder.

even if you inventory isn't full?

Well its weird, sometimes it manages to cut a full inventory of wood, then it just infinitely tries to click thos trees without noticing the backpack is full.
When i run it in to the bank manually, it will put the logs in the bank, and just sit there and the CMD saying No Randoms found every once in a while but not returning to the maples.
After that i manually returned it to the maples and instead of clicking maples it started clicking the grass and CMD still saying No Randoms found every once a while.

From: bob_saget
im having problems using pixel shift to see if it is currently chopping im gonna try to do something with ATPA's for that. Banking works best if your facing north and camerea at medium or high. I haven't had a problem with walking to the anvil try lowering the tolerence on on bankicon or maple icon from 8 to 6, the icon colors change slightly everytime you log in.

Function Chopping: Boolean;
  var
    PBox: TBox;
  begin
   PBox := IntToBox(245, 130, 285, 195);
   Result := (AveragePixelShift(PBox, 250, 500) > 100);
  end; 

I used this for animation. I got this from tutorial.

Testing now. Seems to be working fairly well. Needs better random detection (movement perhaps?) and a better way of detecting tree color (all of the shades of the tree rather than one in particular, so it can cut from multiple camera angles)
But with a particularly adjusted camera angle it seems to be running well on its own. Adding a function to check whether the player is in the process of cutting a tree or not would be benificial, to prevent treehopping.

doesnt bank.

Any chance of modifying this slightly to do the yews in seers too?

From: bob_saget
It's a pretty simple script it chops the maple trees north of seers bank. Start either in seers bank or next to the trees. This script probably has a few bugs. But, testing was going very slow because I have only 46 woodcutting and using a steel axe. My standards suck and it need failsafes. Post any bugs or suggestions.

• no anti leech
• You will need the unofficial 2007 include
• make sure you are facing north and camerea is angle medium
• setting the camera angle at beggining doesn't always work
• if you're having problems finding trees change the maplefind variable
• the antirandom only finds the tree with red eyes and mouth
• if the antirandom causes problems set the variable antirand to false

status:buggy

feel free to use any of my code without crediting me

I do not like how you say "Use my Code without crediting me"…

That is like saying (STEAL MY WORK, SELL IT IF YOU WISH)… Really need to edit that.. If I find any mistakes to your script, I will be sure not to inform you.. Until this is brought down (The STEALING WITH 0 credit)

testing

runs to bank at mid inventory?

Are you planning on adding an anti-leech after the script has been tested for a bit?

added v0.03 made a couple of fixes it should run better now. Walking and banking still need work.

From: Thanatos
Are you planning on adding an anti-leech after the script has been tested for a bit?

Probably it still isn't stable yet, but I do have a good idea for anti leech.

From: VillaVuFTW
I do not like how you say "Use my Code without crediting me"…

That is like saying (STEAL MY WORK, SELL IT IF YOU WISH)… Really need to edit that.. If I find any mistakes to your script, I will be sure not to inform you.. Until this is brought down (The STEALING WITH 0 credit)

edited the OP slightly this script isn't worth trying to sell, I posted that message for other scripters making similar scripts.

From: I See Stars
Any chance of modifying this slightly to do the yews in seers too?

I would need to add a better walking method first. If CynicRus's 07 sps works good I'll try to add it.

Its working better, but I noticed it clicks multiple times while cutting. Maybe include a way to know that the tree its currently cutting is still up, or that its active, so it doesnt send up any red flags.

Also after banking, it clicks in a random spot in the far left corner, not running back to trees, would probably be better to have it click to the right or since roofs are removed, back onto the tree for wcing.

It banks the axe sometimes

Failed to find the color, no result.

Any ideas on how to fix/change the color?

Can someone private msg me on how to start the script, what information to put in it, so it actually starts up on my runescape

From: Taylor Swift
Failed to find the color, no result.

Any ideas on how to fix/change the color?

Take the dropper on the top of the Simba client/code writer thing, and drop it on the icon you want the color of. A magnifying glass will appear on the color you're currently looking at, and once you find the one you want, click it and copy-paste the number you get into the correct section in the script. Hope this helps.

when i try start i got this mesagge.

Exception in Script: Unable to find file 'sps/p07sps.simba' used from ''

any1 can help me please? ty all!

Exception in Script: Unable to find file 'sps/p07sps.simba' used from 'C:\Users\home\Desktop\maplechopnbankv.03.simba'



:( help plz

From: giovy
Exception in Script: Unable to find file 'sps/p07sps.simba' used from 'C:\Users\home\Desktop\maplechopnbankv.03.simba'



:( help plz

just uploaded a new version without sps try that you will need to pick your own colors on the minimap.

From: tealc
just uploaded a new version without sps try that you will need to pick your own colors on the minimap.

ge,

tyvm! just downloaded and i got this message: this program can start because MSVCR100.dll is not in the equip. try reintall the program.


what can i do bro ?

There are some problems with finding trees and understanding the color. The bot doesn't look around much either.

From: giovy
ge,

tyvm! just downloaded and i got this message: this program can start because MSVCR100.dll is not in the equip. try reintall the program.


what can i do bro ?

Go here

http://villavu.com/forum/showthread.php?t=71261

The bot just keeps clicking the maples on the minimap, no matter where i start it or what colours i change it too it wont actually attempt to chop down a maple..

Closed and moved as requested.