SRL Archive - RS3 Script Archive

Read or don't post
Hey everyone, this is my first script for simba, i have tested this script for many hours, and i deem it to be near flawless! this script cuts down regular trees and then fletches the logs into arrow shafts. Effectively, this means it CAN run forever. You need a hatchet wielded (or unwielded for less shafts/hr) and a knife in your inventory! DOES NOT CUT DEAD TREE'S however this can be added with a few very very small changes.

Works best in areas where you have no competition for trees and plenty of trees to cut!

You need the unofficial 2007 include for this script to work. it can be found here http://villavu.com/forum/showthread.php?t=96863

No I will not help you fix the anti-leech so dont post here about it or PM me. i have already made posts about it and thats all im giving out.

UPDATES
1.3(Final Version): need knowledge to remove the anti-leeches. the script is flawless as far as im aware, so i will be discontinuing the production of it. can chop evergreens or trees, you change it, it does it. best spots to cut at - next to the cooking guild by varrock, next to barb village evergreens, trees beyond barb village to the west as you approach falador.
1.2 - you will have to do some editing for it to work correctly. But, the script now turns run on, and fletches with make-x and also has a different method to wait on cutting the tree down

any suggestions are appreciated
IF YOU USE SMART U NEED TO CHANGE THE KEY NUMBER FOR THE ENTER KEY TO WORK

I has compile errors, even after fixing your antileech.

add TreeColors to vars. {$I P07Include.Simba} add it.

Nevermind done. It never uses TreeColors by the way.

wtf is a anti leech?? i just wanna bot what i need to do srsly… why it wont let me press play!! and whats the point! iam dumb and never can fix this. help plz

From: turkkanka
add TreeColors to vars. {$I P07Include.Simba} add it.

It doesn't use TreeColors.

wtf is a anti leech?? i just wanna bot what i need to do srsly… why it wont let me press play!! and whats the point! iam dumb and never can fix this. help plz

yeah ok. remove it and add {$I P07Include.Simba} its missing i guess.

From: turkkanka
yeah ok. remove it and add {$I P07Include.Simba} its missing i guess.

There's a little bit more than that.


@OP, it glitches out after making 10 logs into shafts. You may want to relook into your shaft method.

[Error] C:\Users\kasutaja\Downloads\CutterShafter.simba(16:3): Unknown identifier 'P07_PlayerName' at line 15
Compiling failed.
getting this error i have written my acc name and passsword still hits it

I really can't understand whats wrong with those P07_FindObjCustom?
I have the same issue with the willow banker. I just can't find the problem? Everything is correct when I look at the function in the functionlist..

Can you give me just one hint what to change? Do I need to change the name P07_FindObjCustom?

Thanks very much working great

I've read through the faq and tut, still can't understand how to get this to start…?!

This scripts skips dead tree's, stops working when someone else cuts down the three you are cutting and sometimes it takes 10 seconds to find another tree while there are a bunch of m in front of the character.

Also, when the inventory is full (with logs + knife), nothing happens and if I start the script with full inventory it also doesn't do anything.

From: mrbotter123
There's a little bit more than that.


@OP, it glitches out after making 10 logs into shafts. You may want to relook into your shaft method.

ya i know, my first day scripting i am still trying to perfect everything. will try and fix today

Where is this unofficial 2007 include?

could someone help me fix the anti-leech :)

I keep getting this and have no clue what to do :P

[Error] C:\Simba\Scripts\CutterShafter.simba(16:3): Unknown identifier 'P07_PlayerName' at line 15

New window: 6883494
Compiled successfully in 905 ms.
Checking P07Include VersionNumber
Local : 1.5 / Latest : 1.6
New P07Include Version Available! Updating…
New P07Include Version Downloaded Please Restart Your Script!
Successfully executed.
The following bitmaps were not freed: [0, 1]

thx for the script. works nice.

From: Dvsdvl
Where is this unofficial 2007 include?

- it's in the unofficials' section of the forums.

From: inb4skilled
could someone help me fix the anti-leech :)

I keep getting this and have no clue what to do :P

[Error] C:\Simba\Scripts\CutterShafter.simba(16:3): Unknown identifier 'P07_PlayerName' at line 15

- you are missing an $include statement.

From: Joh
thx for the script. works nice.



- it's in the unofficials' section of the forums.



- you are missing an $include statement.

no prob, i will be pushing another update tonight or tomorrow morning

Someone please help, i'm still stuck i've added the {$I P07Include.Simba} but i can't find out where too put the correct until,end etc.. ;(

From: ACCU
Im gettin the same "Unknown identifier 'P07_PlayerName" thingy. Won't work :/

derp

From: kontempt
Someone please help, i'm still stuck i've added the {$I P07Include.Simba} but i can't find out where too put the correct until,end etc.. ;(

its sad i already forgot what i did lol, but everything should be there, just need to correct puncuation

From: inb4skilled
Add {$I P07Include.Simba} to line 3.

the anti-leech is there for a reason, you aren't suppose to tell people how to fix it

From: blockay
the anti-leech is there for a reason, you aren't suppose to tell people how to fix it

Well sorry I'm new to this and I'm nice so I try to help people

OT: It's a nice script after the few hours of my noobyness to fix XD.

Struggling to resolve the error around line 100. I want to learn, any chance someone can point me in the right direction? :)

From: Nthan
Struggling to resolve the error around line 100. I want to learn, any chance someone can point me in the right direction? :)

If you post the error you are experiencing I'm sure someone could help you. :)

It fails to compile on line 100. The error code I am getting is [Error] C:\Users\Nathan\Downloads\CutterShafter1.1.simba(101:3): Identifier expected at line 100. I have tried using other scripts in comparison to solve the problem, specifically fletching ones but with no luck unfortunately. On line 100, I have 'else;' as the only piece of code on that line. :)

I'm at : [Error] C:\Runescape\Simba\Scripts\07 Scripts\CutterShafter1.1.simba(102:3): Identifier expected at line 101
Compiling failed.

Any suggestions would be appreciated please!

I've got it working i think, but it stops after a few woodcuts?

the fletcher uses make 10.
consider making it use "make x" and then inputting 28 using keyboard…

is this error or am i still not fixing anti leech?

[Error] C:\Users\deJ\Downloads\CutterShafter1.1.simba(36:11): Unknown identifier 'P07_FindObjCustom' at line 35
Compiling failed.

Hi, having a little difficulty around line 100 with: C:\Simba\Scripts\fletch.simba(102:3): Identifier expected at line 101. Checked for even numbers of begins/ends and repeat/until but can't seem to find what's wrong. Also tried changing the indentation of the if statements of out desperation but how they are initially seems logical to me. I know it's something trivial but any suggestions would be received kindly.

I am sorry, but what does this error even mean?
Error] C:\Users\****\Downloads\CutterShafter.simba(16:3): Unknown identifier 'P07_PlayerName' at line 15


Im trying my best to understand from above statements, but still i have no clue to how to fix this. I would appreciate someone helping and not giving me attitude, thanks!

From: gangstafied
I am sorry, but what does this error even mean?
Error] C:\Users\****\Downloads\CutterShafter.simba(16:3): Unknown identifier 'P07_PlayerName' at line 15


Im trying my best to understand from above statements, but still i have no clue to how to fix this. I would appreciate someone helping and not giving me attitude, thanks!

Hi gangstafied, I know I'm new but thought I'd push you in the right direction. Read through this guide and you'll soon resolve your issue http://villavu.com/forum/showthread.php?t=96863

Do you use the

procedure findTree;
Begin
  if not P07_FindObj(x, y, ['ree', 'tre'], [TreeColor], 10) Then
    case RandomRange(1,1000) of
      1..250: P07_MakeCompassNorth;
      251..500: P07_MakeCompassEast;
      501..750: P07_MakeCompassSouth;
      751..1000: P07_MakeCompassWest;
    end;
End;

Function? Because I deleted it… I dont know if I should put if P07_FindOb(… and when I do i get the wrong parameters then…. help me out on this one? Do you want me to change the perameters? Edit.. I just noticed you had this method going already in the ChopTree… do you want me to delete it?

Very nice first script! Well done.

From: Nations_collapse
Do you use the

procedure findTree;
Begin
  if not P07_FindObj(x, y, ['ree', 'tre'], [TreeColor], 10) Then
    case RandomRange(1,1000) of
      1..250: P07_MakeCompassNorth;
      251..500: P07_MakeCompassEast;
      501..750: P07_MakeCompassSouth;
      751..1000: P07_MakeCompassWest;
    end;
End;

Function? Because I deleted it… I dont know if I should put if P07_FindOb(… and when I do i get the wrong parameters then…. help me out on this one? Do you want me to change the perameters? Edit.. I just noticed you had this method going already in the ChopTree… do you want me to delete it?

Seems that this function serves as failsafe in case that a valid tree isn' t found… It rotates the screen to try and find trees.

From: Joh
Seems that this function serves as failsafe in case that a valid tree isn' t found… It rotates the screen to try and find trees.

He has that already tho. Notice it in the chop down function.

I script in java but lol simba is alittle different… But I know what cases are, I actually use those for my draynfisher…

From: The Mayor
Very nice first script! Well done.

thanks! just pushed a new version, unless anyone has any further suggestions i think im bringing the production of this script to an end.

Blockay. Can you give me some hints on what the issue is. I didnt upload to the new p07 include but just now relized that it was missing the P07_… thats how you correct it right?

I just wanna get this to work so I can actually run my base off it..
Im already a script writer at PB so… I can show you that im not here to leech.

From: Nations_collapse
Blockay. Can you give me some hints on what the issue is. I didnt upload to the new p07 include but just now relized that it was missing the P07_… thats how you correct it right?

I just wanna get this to work so I can actually run my base off it..
Im already a script writer at PB so… I can show you that im not here to leech.

make sure you downloaded the unofficial 07 includes

From: Nations_collapse
He has that already tho. Notice it in the chop down function.

I script in java but lol simba is alittle different… But I know what cases are, I actually use those for my draynfisher…

right. noticed it. so - i'd prefer changing the lines 118-124 to findtree;
more neat this way since the proc is already there :P

From: Joh
right. noticed it. so - i'd prefer changing the lines 118-124 to findtree;
more neat this way since the proc is already there :P

you should try to tackle the antileech for the up-to-date version, it is flawless for me.

tackled and solved. the new ver still has some issues - if leveling during fletching - the script will freeze.
something to do with the P07_inventory and inventory vars… i'll try to think of a solution tomorow… maybe count the logs and check every few seconds that the logs are actually decreasing.
plus using <4 for the loop is not good since if solving randoms - you might increase the occupied inventory beyond 3 slots so it'll never decrease under 4 and such.
need to approach this from a specific logs point of view.

Thanks for this, beating all dem noobs.

From: Joh
tackled and solved. the new ver still has some issues - if leveling during fletching - the script will freeze.
something to do with the P07_inventory and inventory vars… i'll try to think of a solution tomorow… maybe count the logs and check every few seconds that the logs are actually decreasing.
plus using <4 for the loop is not good since if solving randoms - you might increase the occupied inventory beyond 3 slots so it'll never decrease under 4 and such.
need to approach this from a specific logs point of view.

i found a solution for the fletching problem just need to implement it. and i know, im also trying to figure something out for that, but <4 is necesarry atm otherwise it will continue trying to fletch the logs. this is only day 2 of the script give me time :P

Granted I'm new to this , but at this point I can't tell if what I'm doing is antileech or I have just butchered the entire code….

From: SlaveCooking
Granted I'm new to this , but at this point I can't tell if what I'm doing is antileech or I have just butchered the entire code….

there is no need for removing big blocks of code, all the errors except for 1 are 1-3 letters/puncuations

Compiled successfully in 764 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Error: Exception: Type Mismatch at line 44
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [0, 1]


Compiles fine, but once I log in game and try to run the script I get the above error. I don't think it's anti leach, as I assume that's there to stop you compiling.

From: Tdoggy
Compiled successfully in 764 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Error: Exception: Type Mismatch at line 44
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [0, 1]


Compiles fine, but once I log in game and try to run the script I get the above error. I don't think it's anti leach, as I assume that's there to stop you compiling.

What's the Line? I'll tell you if it's part of the anti-leech

Im gonna give the anti leech a go. Danny. I release a woddcutter at powerbot for learning purposes. I do not have a anti-leech on it tho. It simply woodcuts trees and then after full it'll terminate the script. is that fine, if its not i'll remove it. I just tested it out for learning. I also have a couple of more question.


When banking should I use a DTM for it on the minimap?
Can you use a DTM for fletching items and such in the chat log?. it would be similar to a widget from pb, how do you guys use ur widgets, do you just use a DTM for it instead?

blockay - for anti-ban purposes can change line 94
from

SendKeys('88', 95, 35);

to

SendKeys(IntToStr(Random(60)+27), 95, 35);

okie. I've managed to get past the inv < 4 and fletching stoping.

changed the code for procedure makeShafts to this:

procedure makeShafts;
  var smallInvCounter: integer;
Begin
    smallInvCounter := P07_InvCount;
    repeat
      MarkTime(thaTime);
      if (Not (P07_InvCount < smallInvCounter)) then
        begin
          If FindBitMapToleranceIn(logs, x, y, MIX1, MIY1, MIX2, MIY2, 50) Then
            Mouse(x, y, Random(3), Random(3), true);
          P07_ChooseOptionMulti(['weiner']);
          P07_MakeCompassNorth;
          If FindBitMapToleranceIn(knife, x, y, MIX1, MIY1, MIX2, MIY2, 50) Then
            Mouse(x, y, Random(3), Random(3), true);
          P07_ChooseOptionMulti(['use']);
          P07_MouseBox(24, 435, 130, 452, 3);
          Wait(RandomRange(400,500));
          ClickMouse2(Mouse_Right);
          Wait(RandomRange(400,500));
          P07_ChooseOptionMulti(['ake X', 'X']);
          Wait(RandomRange(750,900));
          SendKeys(IntToStr(Random(60)+27), 95, 35);
          Wait(RandomRange(300, 400));
          P07_UseKey(13);
          Wait(RandomRange(3000, 5000));
        end
        else
          smallInvCounter := P07_InvCount;
      repeat
        wait(500);
      until(TimeFromMark(thaTime) > 2000)
    until(Not (FindBitMapToleranceIn(logs, x, y, MIX1, MIY1, MIX2, MIY2, 50)))
end;

tested it and it looks like it works quite well to continue to fletch.

I am getting this error when running the script:

[Error] C:\Simba\Scripts\CutterShafter1.2.simba(14:1): Unknown identifier 'runIsOn' at line 13
Compiling failed.

Any ideas? Its my first time trying simba. I followed the install guide and setup the[Unofficial] OldschoolRS07 Include.

From: livekarma
I am getting this error when running the script:

[Error] C:\Simba\Scripts\CutterShafter1.2.simba(14:1): Unknown identifier 'runIsOn' at line 13
Compiling failed.

Any ideas? Its my first time trying simba. I followed the install guide and setup the[Unofficial] OldschoolRS07 Include.

Have you done any coding in the past livekarma? Obviously I can't help you too much because of the policies and rules of the forum, but it might be worth looking at missing variables, hence your unknown identifier error. That should resolve some of your problems, the rest are word/punctuation errors which should be easy to solve if you compare it to a similar simba script. Hope this helps.

Got stuck on line 79, anyone know what we are doing here?

Good update to the script. I had originally modified the makeShafts of your first version, but your new method is much better. I'll be baby sitting this script while I work today, so I will let you know if there's any problems I run into.

EDIT:
It seemed to get stuck when I leveled up my fletching. I waited for a bit to see if it would recover, but then had to click to help it along.

From: Omokest
Good update to the script. I had originally modified the makeShafts of your first version, but your new method is much better. I'll be baby sitting this script while I work today, so I will let you know if there's any problems I run into.

EDIT:
It seemed to get stuck when I leveled up my fletching. I waited for a bit to see if it would recover, but then had to click to help it along.

Omokest - check my previous post. I've written some changes to the makeshaft func which resolves the leveling issue.

Please could someone help me with this error?

[Error] C:\Users\Matty\Desktop\CutterShafter1.2.simba(45:35): Unknown identifier 'ree' at line 44
Compiling failed.

From: livekarma
I am getting this error when running the script:

[Error] C:\Simba\Scripts\CutterShafter1.2.simba(14:1): Unknown identifier 'runIsOn' at line 13
Compiling failed.

Any ideas? Its my first time trying simba. I followed the install guide and setup the[Unofficial] OldschoolRS07 Include.

Im having the same problem, new to this forum and really eager to learn so I can understand the scripts. Managed to solve the punctuation anti-leeches but dont know enough about this one.
Is there a tutorial anyone can link me to? Much appreciated

From: timidtank
Im having the same problem, new to this forum and really eager to learn so I can understand the scripts. Managed to solve the punctuation anti-leeches but dont know enough about this one.
Is there a tutorial anyone can link me to? Much appreciated

compiler is telling you "unknown identifier" - meaning it doesn't know what "runIsOn" is…. maybe you should declare it at the beginning….

From: Tdoggy
Compiled successfully in 764 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Error: Exception: Type Mismatch at line 44
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [0, 1]


Compiles fine, but once I log in game and try to run the script I get the above error. I don't think it's anti leach, as I assume that's there to stop you compiling.

ya it is anti-leech. u get an error because on line 44
(x, y, [ree, tre], [TreeColor, TreeColor3, TreeColors], 1))
there is something wrong inside of that

From: Joh
blockay - for anti-ban purposes can change line 94
from

SendKeys('88', 95, 35);

to

SendKeys(IntToStr(Random(60)+27), 95, 35);

good idea i will add some randomness to it. however, about the makeShaft procedure, can you confirm that this passes the fletching level up screen?

Also, about the camera turning methods to find a tree, does that work at all for anyone or should i update it?
Another question, does your character run out of 'run energy'? or does the you even need to run back on?

Someone help me with the "ree, tre" I changed them to tree, didn't work i declared tree and it throws an error…

NVM got it.

Started to learn about scripts earlier today, have tried to fix this but i just cant pass the Line 80..

Line 80: "[Error] E:\Lataukset\CutterShafter1.2.simba(81:14): Unknown identifier 'thaTime' at line 80
Compiling failed."
I really would appreciate some kind of help out here.. i've been stuck on this for like 3hours.

From: vHextech
Started to learn about scripts earlier today, have tried to fix this but i just cant pass the Line 80..

Line 80: "[Error] E:\Lataukset\CutterShafter1.2.simba(81:14): Unknown identifier 'thaTime' at line 80
Compiling failed."

I really would appreciate some kind of help out here.. i've been stuck on this for like 3hours.

http://villavu.com/forum/showthread.php?t=82793

Thanks, alot.

From: Tdoggy
Compiled successfully in 764 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Error: Exception: Type Mismatch at line 44
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [0, 1]


Compiles fine, but once I log in game and try to run the script I get the above error. I don't think it's anti leach, as I assume that's there to stop you compiling.

I have this too after fixing all the other antileeches. Can someone help?

From: jam5796
I have this too after fixing all the other antileeches. Can someone help?

i gave a hint for that already

Works very well, until you level up in fletching. (you stop fletching and the script waits for it to finish fletching. I tried to fix it, but i was unsuccessful. i tried to put a bitmap of the leveling screen but that did't work. do you have a fix?

From: blockay

good idea i will add some randomness to it. however, about the makeShaft procedure, can you confirm that this passes the fletching level up screen?

Also, about the camera turning methods to find a tree, does that work at all for anyone or should i update it?
Another question, does your character run out of 'run energy'? or does the you even need to run back on?

about first question - the new procedure works well, and passes any type of interference from user/game. it checks every 2 seconds to see if the number of inventory items has decreased, and if not - if there are still log bitmaps - it starts the fletch again. only thing than can make it go berserk is if inventory tab is changed. need to add some failsafes of tab checking.
You can try the procedure yourself - while in fletching phase - click to go somewhere and observe the fletching commence.

the camera turning method works, tho because the screen is almost rectangular - it doesn't always find trees. One thing i did notice - is the mouse jitterring sometimes above a tree - most bot-like (like first person shooters aim-bots)

From: Joh
about first question - the new procedure works well, and passes any type of interference from user/game. it checks every 2 seconds to see if the number of inventory items has decreased, and if not - if there are still log bitmaps - it starts the fletch again. only thing than can make it go berserk is if inventory tab is changed. need to add some failsafes of tab checking.
You can try the procedure yourself - while in fletching phase - click to go somewhere and observe the fletching commence.

the camera turning method works, tho because the screen is almost rectangular - it doesn't always find trees. One thing i did notice - is the mouse jitterring sometimes above a tree - most bot-like (like first person shooters aim-bots)

sorry i am very highly medicated pretty much all the time so i often take a minute to understand some things, but i completely get the method now! you sir are a genius :) i will be releasing an update shortly with many, many, many bugs fixed

Exception in Script: Unable to find file 'P07Include.Simba' used from 'C:\Users\Bazer\Downloads\CutterShafter1.2.simba'

What am i doing wrong direct me to the howtonoob.

From: Joh
compiler is telling you "unknown identifier" - meaning it doesn't know what "runIsOn" is…. maybe you should declare it at the beginning….

Many thanks!

On a side note it seems 07scape has got many new people like me keen to learn some scripting :)

I have made Progress
New window: 1049608
[Error] C:\Simba\Includes\SRL/SRL/core/simba.simba(3:1): Identifier expected at line 2
Compiling failed.

im using the runescape client

[Error] C:\Simba\Scripts\CutterShafter[DONE].simba(7:4): is ('=') expected at line 6
Compiling failed.

From: Chabbis1
[Error] C:\Simba\Scripts\CutterShafter[DONE].simba(7:4): is ('=') expected at line 6
Compiling failed.

same error.

bro , I solved the error at line 6 , now I have trouble with the error at line 41 , I don't know pascal and I'm sorry for being an ibot leecher , but I'm just used to paying to avoid the hassle , can you please give me a hint of a direction I should seek to solve this problem? I want to learn tho.

Edit: I fixed 41 but now I'm stuck at 61 , any help ? I think this is as far as I get on my own.

From: Chabbis1
[Error] C:\Simba\Scripts\CutterShafter[DONE].simba(7:4): is ('=') expected at line 6
Compiling failed.

because the word 'const' is declaring all of those variables as constants, if you look at the rest of the script, they are clearly not constants.

From: punchbaggies
bro , I solved the error at line 6 , now I have trouble with the error at line 41 , I don't know pascal and I'm sorry for being an ibot leecher , but I'm just used to paying to avoid the hassle , can you please give me a hint of a direction I should seek to solve this problem? I want to learn tho.

Edit: I fixed 41 but now I'm stuck at 61 , any help ? I think this is as far as I get on my own.

line 61 is caused by Function IsCutting:
something wrong there

From: blockay
because the word 'const' is declaring all of those variables as constants, if you look at the rest of the script, they are clearly not constants.



line 61 is caused by Function IsCutting:
something wrong there

something something with an incorrect boolean? Just so desperate I started guessing, Also Box := IntToBox should be Box := IntBox , as in integerBox?

This is one hardcore antileeach

oh lol found it , but now I'm stuck at 45 , this never ends!

Im stuck on this one can some help

[Error] C:\Users\Owner\Desktop\cutshaft.simba(62:1): Identifier expected at line 61
Compiling failed.

Throwing me up an error code cant seem to fix it??? [Error] C:\Simba\Scripts\CutterShafter[DONE] (1).simba(7:4): is ('=') expected at line 6

From: punchbaggies
something something with an incorrect boolean? Just so desperate I started guessing, Also Box := IntToBox should be Box := IntBox , as in integerBox?

box := inttobox
means that it changes the integer box to a box. nothing wrong with that.

[Error] C:\Users\staff\Downloads\CutterShafter[DONE] (2).simba(7:4): is ('=') expected at line 6
Compiling failed.
That ERROR !!

I get this when I go to run it now:
[Error] (36951:1): Unexpected end of file at line 36950
Compiling failed.

If I add 'end.' to the script, I get this:
[Error] C:\Users\Tyler\Desktop\CutterShafter[DONE].simba(227:6): Semicolon (';') expected at line 226
Compiling failed.

And I know I can't add the ';' because I also get an error.

Help please?

EDIT: Nvm, I fixed it. I'm silly lol.

From: Isshin
I get this when I go to run it now:
[Error] (36951:1): Unexpected end of file at line 36950
Compiling failed.

If I add 'end.' to the script, I get this:
[Error] C:\Users\Tyler\Desktop\CutterShafter[DONE].simba(227:6): Semicolon (';') expected at line 226
Compiling failed.

And I know I can't add the ';' because I also get an error.

Help please?

EDIT: Nvm, I fixed it. I'm silly lol.

Dude , you got you'r script working ?

THE SCRIPT IS WORKING

Solve the anti leach and don't post about it.

From: Gala
THE SCRIPT IS WORKING

Solve the anti leach and don't post about it.

I believe I have muddled my way around the anti-leach, so any idea with this error?

Compiled successfully in 453 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Error: Exception: Font [P07UpChars] not found. at line 226
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [0, 1, 2]

From: Itrynottotroll
I believe I have muddled my way around the anti-leach, so any idea with this error?

Compiled successfully in 453 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Error: Exception: Font [P07UpChars] not found. at line 226
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [0, 1, 2]

Error: Exception: Font [P07UpChars] not found. at line 226 is fixed by http://villavu.com/forum/showthread.php?t=96863 Need to download the P07Chars.zip and Save, Extract and Move P07UpChars(folder) To: Simba\Fonts\

The following DTMs were not freed: [0, 1, 2, 3] is fixed by using the target icon, and dragging onto your runescape client.

Perfect script. Does exactly what it says, been working for an hour with the Fletching mod someone posted a couple pages back.

Without the fletching modification the script will glitch out whenever you level fletching.

From: vizzyy
Perfect script. Does exactly what it says, been working for an hour with the Fletching mod someone posted a couple pages back.

Without the fletching modification the script will glitch out whenever you level fletching.

the latest version shouldn't 'glitch out whenever you level fletching'
please make sure you have the most up-to-date script.
glad to see the anti-leech's are working well :-)

Anti leeches are great fun :)

EDIT:Beat the anti leech that was great fun its like a detective puzzle :D Thank you very much blockay

what do i do at line 61?? please help

From: greg_nc
Anti leeches are great fun :)

EDIT:Beat the anti leech that was great fun its like a detective puzzle :D Thank you very much blockay

np enjoy :) if you find anything that could be improved let me know

Ill! First script I've found that I really like, great job.

meh, I quit university because I can't script java, php or html.

looked at this and I think my brain literally farted.

I'm not going to 'leech' I'll say thanks IF YOU JUST TELL ME!!!!!! :p

How can I make it cut oaks and other trees. Cause im level 15 and I want to cut oaks :P

i somewhat understand code, am i am really stuck at the IsCutting one..
help…please

From: whatissql
How can I make it cut oaks and other trees. Cause im level 15 and I want to cut oaks :P

Its a staff fletcher designed to cut normal logs and turn them into arrow staffs,there are other scripts avaliable that do a host of different trees, try them out.

im stuck on this error.

[Error] C:\Users\shaemus\Downloads\CutterShafter[DONE].simba(62:1): Identifier expected at line 61
Compiling failed.

Have been on it for about an hour now.. a couple of people have had the same error and i seen that it is a problem with "function IsCutting" but i have looked and looked but still cannot find it -.- any hints??

Note: I am an absolute noob at coding, able to read, not write. So I've been all up and down google trying to solve this anti-leech

For line 61 I know it has to do with defining the variables.

Function IsCutting:
var
PBox, TBox: Integer;
Begin
PBox := IntToBox(238, 149, 286, 186);
Result := (AveragePixelShift(PBox, 250, 350) > 350);
//Writeln(IntToStr(AveragePixelShift(PBox, 500, 650)));
End;

Now i need a couple things explained…

1)The variable TBox, is that supposed to be used in line 64 for "PBox := IntToBox"? Because if you changed "IntToBox" to "IntTBox" would that become the integer TBox? Is that usable?

2)How can we tell what type of variables Pbox and Tbox need to be defined as? I'm assuming Integer because we use the values later in "Result" [what is 'Result := (AveragePixelShift(PBox, 250, 350) > 350);', is that a string? I dont know what it'd be called…]

3)Say we have variables x and y that have integer values. To write them would it be 'x, y: Integer;'? what about if it was just x? 'x: Integer;'?

Someone please help ;_; I'm giving it my all and I think I'm in the right direction…

For line 61 I know it has to do with defining the variables.

close has to do with defining the function

[Error] C:\Users\Cameron\Desktop\CutterShafter[DONE].simba(7:4): is ('=') expected at line 6

is this the anti leeth?

Hello i got the script to work but i got one problem.
In my player name i have "@" but instead it writes ".
How to make it write @ instead of " ??

SakxZ

[Error] C:\Users\Chase\Downloads\CutterShafter[DONE] (1).simba(66:3): Unknown identifier 'Result' at line 65
Compiling failed.

I'm just confused on this part, I looked around on forums for fixes to Unkown Identifiers but no luck, just a hint would be fine.

Very tough anti-leeches…

I hate you.

But i finally solved them all.

At literal end of the script it's

end;
end.

right? Because i did that and it works… SO…………… just making sure

From: Jychoos
Very tough anti-leeches…

I hate you.

But i finally solved them all.

At literal end of the script it's

end;
end.

right? Because i did that and it works… SO…………… just making sure

that works but not how i designed it to work
as long as you aren't getting any errors freeing bitmaps upon stopping the script your fine

From: blockay
that works but not how i designed it to work
as long as you aren't getting any errors freeing bitmaps upon stopping the script your fine

it doesnt go back to chopping after fletching all the logs.. it just stucks

I also get this upon stopping

The following bitmaps were not freed: [2]

then you did not fix the anti leeches correctly ;)

Finally got this script working flawlessly :D

From: tank3
[Error] C:\Users\Cameron\Desktop\CutterShafter[DONE].simba(7:4): is ('=') expected at line 6

is this the anti leeth?

Can someone answer this question? It is really annoying considering that this was posted ages ago but everyone just ignored it, thanks.

From: Baldy
Can someone answer this question? It is really annoying considering that this was posted ages ago but everyone just ignored it, thanks.

that and like 5 other errors ya. was not answered because its obvious

(7:4): is ('=') expected at line 6
Compiling failed.

how i solve that?? pla help

From: 9ck
(7:4): is ('=') expected at line 6
Compiling failed.

how i solve that?? pla help

this antileech is one of the most simple ones in his script. It is defining them as constants, when they are not constants they are something else. Change const to something else

can someone help me out, i cannot get my script to click on any trees. It only puts the mouse over it, then goes to another tree and repeats.

From: Real Regulater
can someone help me out, i cannot get my script to click on any trees. It only puts the mouse over it, then goes to another tree and repeats.

u didn't fix the anti-leeches the right way and therefore its not working right, re download the script and start over

From: blockay
u didn't fix the anti-leeches the right way and messed up the choptree method most likely, re download the script and start over lol

Ive had this problem on previous versions of your script before. I havent even edited anything in the choptree method as it compliled perfectly fine. Actually just recompiled and got an error.
Compiled successfully in 858 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Exception in Script: The bitmap[0] does not exist
The following bitmaps were not freed: [1, 2]
Compiled successfully in 843 ms.

for what they set anti leeches? idk how to fix them….

How can I change the type of tree I want to chop. Cause I dont want to cut regular trees anymore.

From: SakxZ
Hello i got the script to work but i got one problem.
In my player name i have "@" but instead it writes ".
How to make it write @ instead of " ??

SakxZ

Change your keyboard layout to the US one

i want to chop but it says (7:4): is ('=') expected at line 6 Compiling failed. and i want to start chopping reg trees

anyone help me out with my chop tree. procedure ChopTree;
begin
If not IsWcing then
//If P07_FindObjCustom(x, y, ['een', 'wn Ev'], [TreeColor, TreeColor3, TreeColors], 1) Then
If P07_FindObjCustom(x, y, ['ree', 'wn Tr'], [TreeColor, TreeColor3, TreeColors], 1) Then
if Random(28) = 1 then
begin
if not (FindColorTolerance(x,y,65535, 0, 0, 243, 20, 4)) then
begin
ClickMouse2(Mouse_Right);
P07_ChooseOptionMulti (['Chop']);
Wait(RandomRange(500, 1000));
end;
end
else
begin
if not (CountColorTolerance(65535, 0, 0, 243, 20, 30) > 1) then
begin
ClickMouse2(Mouse_Left);
P07_ChooseOptionMulti (['Chop']);
Wait(RandomRange(550, 1000));
end;
end;
end;
Thats what it looks like but it wont click on any trees.

Can anyone help me with this script, i have every compile error fixed, except when i start the script it just hovers over the trees without clicking a single tree.

Someone please help me with this fail safe. Line 114

else
invCounter := P07_Invcount;
repeat
Wait(500);
until (TimeFromMark(thaTime) > 2000);
until not FindBitMapToleranceIn(logs,x,y,MIX1,MIY1,MIX2,MIY2, 50)
end;

[Error] C:\Users\Dane\Downloads\CutterShafter[DONE].simba(115:6): Identifier expected at line 114
Compiling failed.

i Still can't bloody figure out line 61 :c i've looked at other scripts and ive also look at all the other function parts and it looks fine, another hint besides that it is to do with "Function IsCutting" ? D:

EDIT: Nevermind i worked it out 10 seconds after posting this
Tip to others though for line 61: something with B after the semicolon

I'm getting this error:
[Error] C:\Users\Caleb\Downloads\CutterShafter[DONE].simba(227:20): Identifier expected at line 226

Line 226:
TerminateScript;

I tried adding:
end.

after that line, but that doesn't work.

[Error] C:\Simba\Scripts\CutterShafter[DONE].simba(7:4): is ('=') expected at line 6
Compiling failed.

Help please

quit giving out tips its not that hard

Awesome script, runs pretty well!

From: phury
Awesome script, runs pretty well!

thanks man, working on pushing an update in the next day or two

If someone could add me on Skype; Shorteh96
I would like to request a tad bit of assistance.

[Error] C:\Users\Sean\Desktop\CutterShafter[DONE].simba(62:1): Identifier expected at line 61
Compiling failed.

Identifier Expected at Line xxx
It's cause by not having enough end; meaning you the number of begins and ends in your procedure/function do match up - there needs to be an equal number. Also note that a case needs and end; too.
—

I don't understand? All the Begins and Ends line up with the same amount?

From: Shorteh96

[Error] C:\Users\Sean\Desktop\CutterShafter[DONE].simba(62:1): Identifier expected at line 61
Compiling failed.

I don't understand? All the Begins and Ends line up with the same amount?

Quote: Check out the differences between functions and procedures, functions should have something in the first line that procedures dont.

BTW I finally got it working! I love these forums! If anyone is up for making a chicken/cow killer, shoot me a pm.

General script feedback: It works for a while, but I noticed that it sometimes runs off, for example into lumb castle, and just stands and tries to find trees. It might come in handy with a function that stops the script if it haven't found any trees in f.e. 3 minutes. It should also be applied to when random events occur. If you need help with coding them, hit me up!
Also, if running is already enabled it disables it.

after about 5 hours i've finally worked out the anti-leech :D

Amazing script by the way, keep it up :)

but also how could i slow down the time where it makes the shafts, cause it always end up typing random numbers into chat :c

From: BryggarHans
Quote: Check out the differences between functions and procedures, functions should have something in the first line that procedures dont.

BTW I finally got it working! I love these forums! If anyone is up for making a chicken/cow killer, shoot me a pm.

General script feedback: It works for a while, but I noticed that it sometimes runs off, for example into lumb castle, and just stands and tries to find trees. It might come in handy with a function that stops the script if it haven't found any trees in f.e. 3 minutes. It should also be applied to when random events occur. If you need help with coding them, hit me up!
Also, if running is already enabled it disables it.

well thats a shitty spot for trees lol but i will implement it where if it doesn't find trees it will logout. as for random events, thats not as easy as you may think it is. if running is already enabled it should NOT disable it, i have never had this problem before.

From: djm995
after about 5 hours i've finally worked out the anti-leech :D

Amazing script by the way, keep it up :)

but also how could i slow down the time where it makes the shafts, cause it always end up typing random numbers into chat :c

add more wait time after it clicks 'make x', i thought i had slowed it down enough because it works fine for me on my laggy laptop, i'll make some adjustments

Fixed the errors but debug box showed this when I tried to run the script:

The following bitmaps were not freed: [2]
Compiled successfully in 687 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include

Did I do something wrong? Can someone help me with this problem please, ty.

Nvm, wasn't an error lol, just didn't have my RuneScape client open XD + I'm stupid, I meant to find a script that could cut oaks/willows. Didn't read carefully that this was only a regular tree cutter + fletcher. Very nice script though! I also learned a lot trying to figure out the anti-leech, but luckily only took me 10minutes :D

Need a bit of a hint, please?
is const a full command/action? (Not familiar with coding at all too much)

From: tezzyr
Fixed the errors but debug box showed this when I tried to run the script:

The following bitmaps were not freed: [2]
Compiled successfully in 687 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include

Did I do something wrong? Can someone help me with this problem please, ty.

Nvm, wasn't an error lol, just didn't have my RuneScape client open XD + I'm stupid, I meant to find a script that could cut oaks/willows. Didn't read carefully that this was only a regular tree cutter + fletcher. Very nice script though! I also learned a lot trying to figure out the anti-leech, but luckily only took me 10minutes :D

good job, and thanks!

From: LukeB0xx
Need a bit of a hint, please?
is const a full command/action? (Not familiar with coding at all too much)

read up on some tutorials found in the scripting help and tutorials section.

(115:6): Identifier expected at line 114

I cannot work it out, hint please?

Well I'm trying to figure out this anti-leech. Wish me luck!

I've been stuck at line 61 for over an hour and I'm about to cry.
Is IsCutting supposed to be a Procedure instead of a Function?

I've gotta say, thank you for the antileech. It actually helped me learn like 5 new things :) Now to see if the damn script actually works!

Compiled successfully in 360 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Successfully executed.
The following bitmaps were not freed: [2]

Haha I still got it

————————
EDIT:

Just a quick suggestion, change line 116-118 from:

repeat
Wait(500);
until (TimeFromMark(thaTime) > 2000);

To:

repeat
Wait(2500);
until (TimeFromMark(thaTime) > 2000);

Otherwise you will sometimes say random numbers in chat, very detectable.

From: slixor
Haha I still got it

————————
EDIT:

Just a quick suggestion, change line 116-118 from:


To:


Otherwise you will sometimes say random numbers in chat, very detectable.

not that exact line, but this will be fixed in next update :)

From: Toasterss
I've gotta say, thank you for the antileech. It actually helped me learn like 5 new things :) Now to see if the damn script actually works!

thats good to hear!

[Error] CutterShafter[DONE] (1).simba(56:1): Identifier expected at line 55

I need help, I have no idea about scripting, and Blockay, I get that you're sick of giving out hints, but I've never scripted anything in my life, so these hints are like a foreign language to me and are proven no help to me. So how the f***, do I know what to change?
Anyone care to give me assistance?
Skype: kye.mobbs

I've been working on line 65 for several hours now and I cannot seem to fix it. Any tips?

From: SlyTaco (He messaged me)
I saw you got the cut to fletch script to work. I can't seem to figure out what to do on line 65, could you possibly help me out? I've been working on this for several hours. Thanks so much!

You are gonna hate me for not just telling you, but hey, you could learn like I did. Go to the Procedures and Functions part of this guide. Basically, it explains that a function is an input/output. In this case, you are inputting something that returns a true/false or boolean. In order for a function to work you have to tell it the type:
Now read the guide and tell me if you can figure out where to tell the function what type it is.

I have noticed that alot of people have been struggling. this is the best hint I can give.

OP: if you want me to take this down I will

[Error] C:\Simba\Scripts\CutterShafter[DONE] (1).simba(7:4): is ('=') expected at line 6
Compiling failed.

What's happening?

You kids aren't even trying. Never having learned about scripting before in my life, literally took me 10 minutes to fix the anti-leech. And 8 of those minutes were to figure out the last few bits (hope that's vague enough).

Seriously, if you can't figure it out by reading the helpful guide from Coh3n at least compare it to a working script before you cry about not being spoonfed answers.

EDIT: Also one quick question. I've noticed that the bot makes two attempts at cutting shafts every time my inventory fills or I've leveled up. It starts crafting with the Make-X and repeats the same thing in about the time it takes to cut one log.

I feel as though this is because it's not recognizing that I've already started fletching until after the first log, but I don't have any idea how to fix it.

Hey finally fixed the anti-leech this is the first script I've tried to use.

Works fine apart from sometimes when trying to fletch it messes up and goes to fast or something and ends up typing random numbers into chat and sending. Is there a way to just slow it down a bit?

Yea I think I figured it out. The issue is the script checks "IsFletching" too soon after it first starts cutting. Adding a delay should fix it. Not sure if it matters exactly where the delay goes; I put mine in after P07_UseKey(13);

You can play around with the exact numbers if you like but I've found 5000-6000ms was plenty for me

From: Whyte
Yea I think I figured it out. The issue is the script checks "IsFletching" too soon after it first starts cutting. Adding a delay should fix it. Not sure if it matters exactly where the delay goes; I put mine in after P07_UseKey(13);

You can play around with the exact numbers if you like but I've found 5000-6000ms was plenty for me

5000-6000 it 5-6 seconds, if u levelup on the first couple logs in ur inven, it will have to wait 5-6 seconds plus any other waiting time in the makeShafts method. id suggest lowering it a little bit or wait for an update :)

Supernice script, thanks for releasing

thanks a lot, glad to see u got the antileech figured out ^

x, aInteger, run, invCounter, runIsOn, thaTime, TreeColor3, y, z, logs, level, knife, TreeColor, TreeColors: integer;

[Error] C:\Users\Mark\AppData\Local\Temp\CutterShafter[DONE]-1.simba(7:4): is ('=') expected at line 6
Compiling failed.

i dont understand??

stuck [Error] C:\Simba\Scripts\CutterShafter[DONE].simba(63:1): Identifier expected at line 62
Compiling failed. Some tips pls :D

From: Maadi
stuck [Error] C:\Simba\Scripts\CutterShafter[DONE].simba(63:1): Identifier expected at line 62
Compiling failed. Some tips pls :D

something to do with bo

From: teabag
x, aInteger, run, invCounter, runIsOn, thaTime, TreeColor3, y, z, logs, level, knife, TreeColor, TreeColors: integer;

[Error] C:\Users\Mark\AppData\Local\Temp\CutterShafter[DONE]-1.simba(7:4): is ('=') expected at line 6
Compiling failed.

i dont understand??

hmm, look through the script and ask yourself what the constants actually do…

[Error] C:\Users\Tim\Desktop\CutterShafter[DONE].simba(7:4): is ('=') expected at line 6
Compiling failed.

Stuck :S
[Error] C:\Users\Maadi\Desktop\kesken.simba(66:37): Type mismatch at line 65

PBox := IntToBox(238, 149, 286, 186); what these are?

Ok… So i got past the Anti-Leech, now this shows up. Btw it shows up for every script i use.
Checking P07Include VersionNumber
Local : 1.6 / Latest : 1.7
New P07Include Version Available! Updating…
New P07Include Version Downloaded Please Restart Your Script!
Successfully executed.
The following bitmaps were not freed: [0, 1, 2]

I went into the includes and it says the version it is using is 1.7 but the local thing says 1.6?? help
I think thats why the bitmaps were not freed.(no idea)
If someone helped i would very appreciate it.

The line 6 error was a no brainer, stuck on this and not sure if it is even part of the anti-leech since I saw no other posts about it.

[Error] C:\Simba\Scripts\CutterShafter[DONE]_1.simba(42:15): Unknown identifier 'log' at line 41
Compiling failed.

procedure FreeThings;
Begin
FreeBitMap(log)
FreeBitMap(knife)
End.

From: Dont Blink
The line 6 error was a no brainer, stuck on this and not sure if it is even part of the anti-leech since I saw no other posts about it.

[Error] C:\Simba\Scripts\CutterShafter[DONE]_1.simba(42:15): Unknown identifier 'log' at line 41
Compiling failed.

procedure FreeThings;
Begin
FreeBitMap(log)
FreeBitMap(knife)
End.

it is part of the antileech

From: hunua100
Ok… So i got past the Anti-Leech, now this shows up. Btw it shows up for every script i use.
Checking P07Include VersionNumber
Local : 1.6 / Latest : 1.7
New P07Include Version Available! Updating…
New P07Include Version Downloaded Please Restart Your Script!
Successfully executed.
The following bitmaps were not freed: [0, 1, 2]

I went into the includes and it says the version it is using is 1.7 but the local thing says 1.6?? help
I think thats why the bitmaps were not freed.(no idea)
If someone helped i would very appreciate it.

restart simba

restart simbaU
I have nothing changes

restart simba
I have nothing changes

do you plan on adding in the axe-breaking random event? Axe broke but other than that this works wonderfully ^^

From: hunua100
restart simba

I have nothing changes
ok well thats unrelated to my script. make sure u download and add the P07 include correctly

From: shadowstalker
do you plan on adding in the axe-breaking random event? Axe broke but other than that this works wonderfully ^^

i've got a lot of updates planned and thats one of them, my uptext is broken though so i'm not sure when i'll be able to update it

fixed it all up but it is not pressing the enter key after typing into the box a random amount to fletch :(

From: rudeboy99999
fixed it all up but it is not pressing the enter key after typing into the box a random amount to fletch :(

Had that problem with smart. If you don't care about making it random then just change the ke x, x to ke 10, 10

and take away the part where it sends the enter key.

Compiled successfully in 358 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Successfully executed.

Nothing happens after this?

These anti leech thingys are just good i have learnd quite much for now im still stuck at line 115 but hopefully im going to figure it out soon =)



edit:

[Error] (37411:1): Unexpected end of file at line 37410
Compiling failed.

Guess i have to take another look :DDDdd maybe some "end" command doesnt have ;

I just ate my brains.

Why am i getting ?


[Error] C:\Users\Adam\Downloads\CutterShafter[DONE] (1).simba(7:4): is ('=') expected at line 6
Compiling failed.
Help please

Compiled successfully in 1357 ms.
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Error: Exception: You passed a wrong ye to a finder function: 231. The client has a height of 24, thus the ye is out of bounds. at line 226
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [0, 1, 2]

Ok so what now? wtf O.o

coming from a heavy java background this antileech was a little challenging yet extremely smart. Thanks for the cool script.

x, aInteger, run, invCounter, runIsOn, thaTime, TreeColor3, y, z, logs, level, knife, TreeColor, TreeColors: integer;

Wont let me start the script because of this which i believe is because of anti leech, i support this anti leech alot as it creates a better community however im fairly clueless on what to do. Im keen to get into this type of scripting is there anyone who can give me a hand or point me in the right direction to find out how to remove anti leech? cheers.

anti-leach?[Error] C:\Users\dylan\Downloads\CutterShafter[DONE].simba(50:1): Semicolon (';') expected at line 49

I'm completely new to this and attempted to compare scripts to sort of get an idea of what is going on, sadly i haven't made much progress as I am stuck on line 66 lol. I'm pretty stumped but later today i think ill definitely give it another shot

[Error] C:\Simba\Scripts\CutterShafter[DONE].simba(8:4): is ('=') expected at line 7
Compiling failed.

????

*finally got it, thanks :)

I'm stuck at the Var thingy, done everything exept that, not trying to leech here but just not that good at java

I am so seriously stuck. I have tried EVERYTHING with this… Been on it for 2 days:

Function IsCutting: Integer;

PBox, TBox: Integer;

Begin
PBox := IntToBox(238, 149, 286, 186);
Result := (AveragePixelShift(PBox, 250, 350) > 350);
//Writeln(IntToStr(AveragePixelShift(PBox, 500, 650)));
end;

In this state I get this: [Error] C:\Users\Harry\Downloads\CutterShafter[DONE].simba(63:2): 'BEGIN' expected at line 62
Compiling failed.

So i put in a begin and an end. then this happens: [Error] C:\Users\Harry\Downloads\CutterShafter[DONE].simba(63:2): Unknown identifier 'PBox' at line 62
Compiling failed.

I have tried putting 'var' and 'const' there, but i just cannot get past this anti-leech…..

Got the anti-ban so far, really enjoying having to teach myself how to work these out. Could someone point me in the right direction with

[Error] (36953:1): Unexpected end of file at line 36952
Compiling failed.

can someone please help me out is this the anti leech?



[Error] C:\Simba\Scripts\CutterShafter[DONE].simba(7:3): is ('=') expected at line 6
Compiling failed.

From: itsblown
can someone please help me out is this the anti leech?



[Error] C:\Simba\Scripts\CutterShafter[DONE].simba(7:3): is ('=') expected at line 6
Compiling failed.

He said don't ask for help, and he even gave hints c'mon man. Just take a look at other scripts then compare + contrast.


OT: I guess I fixed the anti-leech wrong, but i'm not sure what I've done. I have a light programming history (I've programmed RuneScape provate servers for a few years), so I understand more than the average user, however I'm not sure which problem I should go about re-doing. Any help would be appreciated. (Please don't spoon-feed me, i'm looking to learn on my own.)

From: Hamish
Got the anti-ban so far, really enjoying having to teach myself how to work these out. Could someone point me in the right direction with

[Error] (36953:1): Unexpected end of file at line 36952
Compiling failed.

It's saying the file was ending unexpectedly, what this means;

The file isn't set to end, so you need to make sure there's nothing continuing past the end.

ATM the script does everything except fletch the shafts, when it comes to fletching it clicks "make x" and enters a random number BUT does NOT press "enter" so to speak, therefore it gets stuck continuously making x but not actually making them (if u understand that)

In the debug after stopping the script i get this:
SRL Compiled in 0 msec
Loading SMART: http://oldschool33.runescape.com/j1
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Welcome to Project RS06
Enter your username & password
Click To Play
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3, 4, 5]
The following bitmaps were not freed: [0, 1, 2, SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, SRL - Options Bitmap]

Any help is appreciated

I know i have to edit somthing here:

P07_ChooseOptionMulti(['ke X', 'X']);
Wait(RandomRange(750,900));
SendKeys(IntToStr(RandomRange(27, 99)), 95, 35);
Wait(RandomRange(300, 400));
P07_UseKey(13);


Just not sure of how to actually make it press enter

i'm new to this item, and i've read the past 7 pages of this topic.
So anti-leech meens that u exclude all people who can not code from using your script?
Now this topic is getting spammed with the same questions over and over again :s
anyway: if someone can explain me a bit more then please feel free to add me on skype: jixepo
(i installed simba correctly with SMART 8.0 and enabled the 07 future, yet i do not know how to code…)
thanks in advance!

From: iTz Dat Simba Guy
ATM the script does everything except fletch the shafts, when it comes to fletching it clicks "make x" and enters a random number BUT does NOT press "enter" so to speak, therefore it gets stuck continuously making x but not actually making them (if u understand that)

In the debug after stopping the script i get this:
SRL Compiled in 0 msec
Loading SMART: http://oldschool33.runescape.com/j1
Checking P07Include VersionNumber
Local : 1.7 / Latest : 1.7
You Have The Latest Version of P07Include
Welcome to Project RS06
Enter your username & password
Click To Play
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3, 4, 5]
The following bitmaps were not freed: [0, 1, 2, SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, SRL - Options Bitmap]

Any help is appreciated

I know i have to edit somthing here:

P07_ChooseOptionMulti(['ke X', 'X']);
Wait(RandomRange(750,900));
SendKeys(IntToStr(RandomRange(27, 99)), 95, 35);
Wait(RandomRange(300, 400));
P07_UseKey(13);


Just not sure of how to actually make it press enter

ur using smart client which requires different key for enter.

From: blockay
ur using smart client which requires different key for enter.

Anyone know what this key is? ^^

how do u run this on smart lol

How to make it press the enter key, and backspace like 10 times after it pressed enter (Incase it messed up before).


Change line 102 from

P07_UseKey(13);


to


P07_UseKey(10);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);


And how to run on SMART:


Change this:

program CutterShafter;
{$I SRL/SRL.Simba}
{$I P07Include.Simba}


to this:

program CutterShafter;
{$DEFINE SMART8}
{$i SRL/SRL.simba}
{$I P07Include.Simba}

From: Irskairt
I am so seriously stuck. I have tried EVERYTHING with this… Been on it for 2 days:

Function IsCutting: Integer;

PBox, TBox: Integer;

Begin
PBox := IntToBox(238, 149, 286, 186);
Result := (AveragePixelShift(PBox, 250, 350) > 350);
//Writeln(IntToStr(AveragePixelShift(PBox, 500, 650)));
end;

In this state I get this: [Error] C:\Users\Harry\Downloads\CutterShafter[DONE].simba(63:2): 'BEGIN' expected at line 62
Compiling failed.

So i put in a begin and an end. then this happens: [Error] C:\Users\Harry\Downloads\CutterShafter[DONE].simba(63:2): Unknown identifier 'PBox' at line 62
Compiling failed.

I have tried putting 'var' and 'const' there, but i just cannot get past this anti-leech…..

as requested i removed the antileech help

I just finished figuring out all the anti-leech and this script works perfectly! After this I have a much greater appreciation for anti-leeching, as that was probably the best learning experience I could have gotten on this subject! Thanks so much, blockay! :D

From: MrOmigoodness
I just finished figuring out all the anti-leech and this script works perfectly! After this I have a much greater appreciation for anti-leeching, as that was probably the best learning experience I could have gotten on this subject! Thanks so much, blockay! :D

awesome gj glad you u dont mind the antileech unlike a lot of other people ^

pfff my brain. ouch stuck on line 114 : invCounter := P07_InvCount;
can please someone help me.

What do you mean?

I fixed the anti-leeches, but I keep getting this error now: [Error] (1:1): Unexpected end of file at line 0
Compiling failed.

Edit: Nvm, was being a complete retard -.-.

[Error] C:\Users\Rusty\Downloads\CutterShafter[DONE].simba(7:4): is ('=') expected at line 6
Compiling failed.

?…

[Error] C:\Users\Neil\AppData\Local\Temp\CutterShafter[DONE].simba(112:94): Type mismatch at line 111
Compiling failed.

is this part of the anti leach or did i just fuck something up

From: Brid Mayhem
How to make it press the enter key, and backspace like 10 times after it pressed enter (Incase it messed up before).


Change line 102 from

P07_UseKey(13);


to


P07_UseKey(10);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);
P07_UseKey(8);


And how to run on SMART:


Change this:

program CutterShafter;
{$I SRL/SRL.Simba}
{$I P07Include.Simba}


to this:

program CutterShafter;
{$DEFINE SMART8}
{$i SRL/SRL.simba}
{$I P07Include.Simba}

Thanks

Got past all the anti-leech then, "Unexpected end of file at line 37957" dafuq

the antileach on this script is quite wierd

IGNORE THIS IF YOU WANT, just saw somebody posted it earlier.

If you want to make it SMART8 compatible, change the following:

Add {$DEFINE SMART8} before you include SRL and P07INCLUDE like this:

[COLOR="#FF0000"]{$DEFINE SMART8}[/COLOR]
{$I SRL/SRL.Simba}
{$I P07Include.Simba}

And then add SetupSRL; in the main loop before your call P07_DeclarePlayer:

DTM;
CallThings;
[COLOR="#FF0000"]SetupSRL;[/COLOR]
P07_DeclarePlayer;
SetupP07Include;
ActivateClient;
Addonterminate('FreeThings');
login; 

Fletching so buggy, seems as if it's not hitting enter after it's typed in the number to fletch..

From: Omenga
Got past all the anti-leech then, "Unexpected end of file at line 37957" dafuq

Obviously haven't completed the anti-leech then!

^ you two have to change the enter key for it to work on smart, I was having trouble with it for a while

[Error] C:\Users\Jackson\Downloads\CutterShafter[DONE].simba(7:4): is ('=') expected at line 6
help??

Same problems as the other noobies. I can't find a single thread in the beginner tutorials thread on fixing things for certain lines, or how they should work. Not everyone has time to spend 5 hours looking up something "simple."

From: All Hail
Same problems as the other noobies. I can't find a single thread in the beginner tutorials thread on fixing things for certain lines, or how they should work. Not everyone has time to spend 5 hours looking up something "simple."

well there are different guidelines being formed about anti-leeches. until then, this script will still have them. the anti-leeches are all pretty basic, if you can't figure them out, or don't have the time. then you can't use the script

No such thing as basic anti leech if you don't have a way to figure it out. Doesn't matter though, your script will be gone or without anti-leech within 2 weeks anyway.

From: All Hail
No such thing as basic anti leech if you don't have a way to figure it out. Doesn't matter though, your script will be gone or without anti-leech within 2 weeks anyway.

lots of other people are figuring it out, sorry you can't. why would it be gone? i don't really care either way i've moved on from this script a long time ago

From: blockay
lots of other people are figuring it out, sorry you can't. why would it be gone? i don't really care either way i've moved on from this script a long time ago

I've been on this site for about a week for small bits of time, I have yet to see anyone new who said they figured it out. Funny you tell me to look through the site and you didn't even see this: http://villavu.com/forum/announcement.php?f=&a=48
No more anti-leech.

From: All Hail
I've been on this site for about a week for small bits of time, I have yet to see anyone new who said they figured it out. Funny you tell me to look through the site and you didn't even see this: http://villavu.com/forum/announcement.php?f=&a=48
No more anti-leech.

well u obviously haven't looked at the posts from other users then. when did i tell u to look through the site? i knew that anti-leeches were going to be removed but i didn't see that announcement

Lovely anti-leech! Made me think a little bit since I haven't scripted for myself in a while. Thank you for the script. I'll report back on how it runs! Once again, thank you. :)

- Eddie, botting since 2006 and RS player since the beginning.



EDIT: ERROR, the script WILL get stuck if it chops a tree other than a regular one and gets a log. It spent roughly 10 minutes attempting to fletch an oak log.

From: eddieh20us
Lovely anti-leech! Made me think a little bit since I haven't scripted for myself in a while. Thank you for the script. I'll report back on how it runs! Once again, thank you. :)

- Eddie, botting since 2006 and RS player since the beginning.



EDIT: ERROR, the script WILL get stuck if it chops a tree other than a regular one and gets a log. It spent roughly 10 minutes attempting to fletch an oak log.

ah didnt know that. next version shouldnt click oak trees, but i'll add in a failsafe anywho

From: blockay
ah didnt know that. next version shouldnt click oak trees, but i'll add in a failsafe anywho

Thank you! Anyways, great job. :)

A big thank you for this script, I began to edit it to perform other tasks and you rekindled my intrest for scripting

From: blockay
well u obviously haven't looked at the posts from other users then. when did i tell u to look through the site? i knew that anti-leeches were going to be removed but i didn't see that announcement

Tell me, how did you learn to script?

Do I have to edit SmartParams? I get most scripts working but I keep getting "If RSReady then" error…

From: All Hail
Tell me, how did you learn to script?

skimmed some guides a couple weeks ago and just went for it.

From: Weztic
Do I have to edit SmartParams? I get most scripts working but I keep getting "If RSReady then" error…

make sure u setup smart correctly. or don't use smart and u shouldn't get an error

From: blockay
skimmed some guides a couple weeks ago and just went for it.

make sure u setup smart correctly. or don't use smart and u shouldn't get an error

I use wmart, it works great, but I get an error with this script, I think I am using smart 7.2v or something, I cant find the place to get 8v : (

From: Weztic
I use wmart, it works great, but I get an error with this script, I think I am using smart 7.2v or something, I cant find the place to get 8v : (

go to the main page of the forums and click on the S.M.A.R.T. secition. u should be able to find a guide with smart8 downloads. smart8 works fine for me, no reason to use 7.2 :P

i took a class on scipting and still cant figure the anti leach out… o well

I have this compiling error now, and I was wondering if I messed up the script with my past changes or if I'm on the right track.

[Error] C:\Users\Family\AppData\Local\Temp\CutterShafter[DONE].simba(64:3): Identifier expected at line 63
Compiling failed.

Had to re-check some basic guides, but it really only took about 5-10 minutes. thanks very much for the script!

I'm stuck and getting this error

"[Error] C:\Users\Justice\Downloads\CutterShafter[DONE] (1).simba(65:1): Identifier expected at line 64
Compiling failed."

I have read through this thread multiple times looking for hints and whatnot and I've looked through other threads trying to compare script/research common errors. I have no background in coding whatsoever, can anyone help me? I've seen that this error has to do with not having enough "end." But I don't exactly understand what that means with my 4 days of coding/scripting knowledge..

Here's where i'm at:

Function IsCutting: Integer;
var
PBox: TBox; Integer:
Begin
PBox := IntToBox(238, 149, 286, 186);
Result := (AveragePixelShift(PBox, 250, 350) > 350);
//Writeln(IntToStr(AveragePixelShift(PBox, 500, 650)));
End;

Any advice is greatly appreciated.

Change This:

Function IsCutting: Integer;
var
PBox: TBox; Integer:
Begin
PBox := IntToBox(238, 149, 286, 186);
Result := (AveragePixelShift(PBox, 250, 350) > 350);
//Writeln(IntToStr(AveragePixelShift(PBox, 500, 650)));
End; 

To This:

Function IsCutting: boolean;
var
  PBox: TBox;
Begin
  PBox := IntToBox(238, 149, 286, 186);
  Result := (AveragePixelShift(PBox, 250, 350) > 350);
  //Writeln(IntToStr(AveragePixelShift(PBox, 500, 650)));
End;

I also suggest you read through this before you post any more code:
http://villavu.com/forum/showthread.php?t=60288

---

People are much more likely to just skip over and ignore any request for help that is just a messy blob of text.
Its common courtesy to make it as easy as possible for those taking time to help you.

From: Omenga
Got past all the anti-leech then. "Unexpected end of file at line 37957" Wtf?!?!

[INDENT]Yah that confused me at first too…. :frusty:
Look at the end of the script.
It is missing a line of code necessary to END every and any script. *Hint Hint*

---

However…. one more step to go!
But if you made it this far…. it will be a breeze hahahaha.
:smarty:[/INDENT]

*Wheeeeeew* That was a difficult anti-leach!

Good refresher after being gone nearly a year.:sasmokin:

From: lorenzo
wtf is a anti leech?? i just wanna bot what i need to do srsly… why it wont let me press play!! and whats the point! iam dumb and never can fix this. help plz

Get the fuck out of here

According to scripting rules, you are not allowed to have anti-leech to scripts.

From: Mastemine
According to scripting rules, you are not allowed to have anti-leech to scripts.

well according to the script writer you don't get a script then.

From: AcidAlchemy
well according to the script writer you don't get a script then.

But I already have the script…

wat do?

not working, even you anti-leach..

Yeah.. if you could actually just edit the simba yourself and say how many leecher shit we have to fix, before we are spending 1 hour + on finishing a Simba program which isn't even usefully that much, closes when it doesn't notice any trees and is fucked by randoms every 20 mins. So we can just spend our time on things like homework and porn.

that would be great.

now som1 please post the anti-leeched script under here. I will not use the script to simba on multiple accounts, and will use the arrows for my own purpose.

then you will be my hero today.

^hemadbro, is there a way to make it smart compatible, i got it working flawlessly btw

[Error] C:\Simba\Scripts\CutterShafter[DONE].simba(7:4): is ('=') expected at line 6
Compiling failed.
line 6: x, aInteger, run, invCounter, runIsOn, thaTime, TreeColor3, y, z, logs, level, knife, TreeColor, TreeColors, integer;

Working through the anti-leech but now I'm getting this error message which doesn't seem like an anti-leech to me… but I am new to this. Any help?

i am just confused on why you would even bother put an anti-leech on this script. Figured it out pretty quickly but for the normal person they would just not bother with figuring it out. You are in fact making them get frustrated and end up quiting at any attempt to fix this bot. But regardless of the criticism about the anti-leech, this is a pretty good bot based on what it is made for.

EDIT: I got the anti leech off of the script, however when it cuts to a full inventory, it clicks on the combat style tab and then continues by writing numbers for the amount of shafts to make. It gets stuck write here

Anyone know what this error means??

"[Error] C:\Simba\Scripts\CutterShafter[DONE].simba(8:3): Identifier expected at line 7
Compiling failed."

shit i give up, i was going to use this bot so i didn't have to spend hours at the computer, yet this anti-leech shit makes me have to do the opposite.

const
x, aInteger, run, invCounter, runIsOn, thaTime, TreeColor3, y, z, logs, level, knife, TreeColor, TreeColors: integer;

Please can't find the solution of this ,I have tried to read this :
http://villavu.com/forum/showthread.php?t=60288
But still can't find the solution ,
The most important part of this guide is :
{YES}
procedure Test(x, y, z, a, b, c: Integer; f, g: string);

{NO}
procedure Test(x: Integer; y: Integer; z: Integer; a: Integer; b: Integer; c: Integer; f: string; g: string);


But still can't figure it out ,I'm not a coder ,Please help thanks for reading

[Error] C:\Users\Xhaolingfu\Downloads\CutterShafter[DONE].simba(10:3): Identifier expected at line 9
Compiling failed.
x, aInteger, run, invCounter, runIsOn, thaTime, TreeColor3, y, z, logs, level, knife, TreeColor, TreeColors: integer; Says theres an error with this ? what do i do ??

thanks on the help on the antileech

Closed.
Moved to archive.
@blockay please familiarize yourself with the new rule:
http://villavu.com/forum/announcement.php?f=&a=48

If you wish to re-release this without antileech please let a staff member know and this thread will be reopened.