SRL Archive - RS3 Outdated / Broken Scripts

This script fishes trout and salmon in Lumbridge and uses the EOC teleport for the fastest banking in F2P. You can also choose to drop the fish.

Location:

• Fly-Fishing spots on the west side of the river

Features:

• SixHourFix Support
• Pixelshift fishing detection
• EOC Dropping (will place fish automatically, no setup needed :))
• Deposit Banking
• Spot Switching
• ObjectDTM Area Detection
• Duck-Proof

Instructions:

• Download the custom SPS map from the attachments, and place it in the runescape_other SPS images folder
• Start player at one of the Fly-Fishing spots.
• Have your inventory empty except for feathers which should be in your 1st slot
• Set the 1st XP tracker to the skill Fishing or Total
• Press Run.

Requirements:

• The custom SPS map (attached)
• ODTM include (Get it here: http://villavu.com/forum/showthread.php?p=847813 ) Follow installation instructions from the linked thread.
• Must not have completed the EOC combat tutorial in Lumbridge if you're banking!

From: corrupt16
Seems that upping CPU priority to max on the Smart client seems to help finding the spawns, fixing one of my issues. Maybe you should suggest this as a recommendation on your first post to migrate similar problems.

Enjoy, please post any questions, suggestions, ideas, feedback, proggies, or anything else that you want to

" Lumbridge Fly-Fisher "
So much for that competition ;)
Gz on release :D

From: The Killer
" Lumbridge Fly-Fisher "
So much for that competition ;)
Gz on release :D

None of the names were worth 100k ;)

Congrats on the release BMW

From: Gucci
Congrats on the release BMW

Thanks :)

Good job BMWxi.

From: Silentcore
Good job BMWxi.

Thanks Silent :)

Exception in Script: Unable to find file 'ObjectDTM\ObjDTMInclude.simba???

From: iETHOSi
Exception in Script: Unable to find file 'ObjectDTM\ObjDTMInclude.simba???

Did you install it by following the directions here?:

ODTM include (Get it here: http://villavu.com/forum/showthread.php?p=847813 ) Follow installation instructions from the linked thread.

Let me know if you get it installed fine and it still won't work :)

Followed all steps in the other post, still get the same error. =\

From: iETHOSi
Followed all steps in the other post, still get the same error. =\

Could you go to your Simba folder, then look in the Includes folder, and check if there is a folder called ObjectDTM in it?

From: BMWxi
Could you go to your Simba folder, then look in the Includes folder, and check if there is a folder called ObjectDTM in it?

No folder with that name, do I make one?

From: iETHOSi
No folder with that name, do I make one?

If the installation went well there should be one, but yes, you should make one.

make sure it is called ObjectDTM. Then put the following files inside it:

Once the files are inside the folder, close everything Simba-releated and then follow the installation isntructions from the thread. :)

From: BMWxi
If the installation went well there should be one, but yes, you should make one.

make sure it is called ObjectDTM. Then put the following files inside it:

Once the files are inside the folder, close everything Simba-releated and then follow the installation isntructions from the thread. :)

OK, hopefully this works lol.

Now I'm getting this. [Error] C:\Simba\Includes\ObjectDTM\ObjDTMInclude.simba(2:1): 'BEGIN' expected at line 1

From: iETHOSi
Now I'm getting this. [Error] C:\Simba\Includes\ObjectDTM\ObjDTMInclude.simba(2:1): 'BEGIN' expected at line 1

You definitely shouldn't get that, let me just try my ObjectDTM stuff.

Try these ones, I just tested with them and it works:

@ iETHOSi

Did you do this?

http://villavu.com/forum/showthread.php?t=68112&page=13&p=1167389#post1167389

From: euphemism
I have a new host for the project now, courtesy of [J]ustin. As a result, everyone is going to have to re-download the ObjectDTM.sex extension from the first post, and follow the instructions to install it. Additionally, it is required to do the following:

After downloading and installing the extension, please navigate to the following and make sure it is checked:

ODTM > Settings > Override Update

Then, click on:

ODTM > Update

—

A very small number of changes to the include can be found in the changelog on the first post.

/Double post

OK, script loads up fine, now the red cursor is just staying in the top left of the screen. =\

From: iETHOSi
OK, script loads up fine, now the red cursor is just staying in the top left of the screen. =\

Are your settings at fixed, max brightness, and safemode?

I'm using this right now so it's definitely working…

From: BMWxi
Are your settings at fixed, max brightness, and safemode?

I'm using this right now so it's definitely working…

All working now, brightness wasn't maxed lol. Thanks for all the help and I hope to get 99 fishing on my F2P account with this. :)

From: iETHOSi
All working now, brightness wasn't maxed lol. Thanks for all the help and I hope to get 99 fishing on my F2P account with this. :)

No problem, glad everything got sorted :)

Good luck on your 99, if you want to post proggies I'd love to see them! :D

Future urn support?

E: Actually realised this was Lumby only, might be tricky.

From: The Mayor
Future urn support?

E: Actually realised this was Lumby only, might be tricky.

Because it deposits the fish at a deposit chest, urns wouldn't really be a good option. At level 70 I get a steady 30k xp/h though, here's a short proggy:


Whoops, that should just say Banking Fish, looks like I forgot to change it :p

From: BMWxi
Because it deposits the fish at a deposit chest, urns wouldn't really be a good option. At level 70 I get a steady 30k xp/h though, here's a short proggy:


Whoops, that should just say Banking Fish, looks like I forgot to change it :p

What are the advantages of botting at Lumbridge as opposed to Barbarian Village? Barbarian Village is closer to the GE for buying feathers.

I also get around 40k XP/hr at barbarian village at those levels.

Its looks really good. Its pretty fast too.
Just a bug, though I think it would have overcome this with out me interfering, was that in the actionbar dropping, it confused the sword color of "sever" the basic attack ability for those of a trout.

Proggy coming up!

===========[] LumbrigeFlyFisher 1,0 []===========
[+] By BMWxi [+] Status: Going to SouthSpot
==============================================
[] Fishing XP Earned: 32840 Per Hour: 36132
[] Salmon Caught: 223 Per Hour: 245
[] Trout Caught: 320 Per Hour: 352
[] Loads: 25 Per Hour: 27
[] Total Time: 54 min 32 sec
==============================================

From: CyberSyringe
What are the advantages of botting at Lumbridge as opposed to Barbarian Village? Barbarian Village is closer to the GE for buying feathers.

I also get around 40k XP/hr at barbarian village at those levels.

Lumbridge is closer to the deposit chest, also it uses the free EOC teleport to get there. When I was using Flight's at barbarian village I was getting around 30k banking so I made this one.

From: Lalaji
Its looks really good. Its pretty fast too.
Just a bug, though I think it would have overcome this with out me interfering, was that in the actionbar dropping, it confused the sword color of "sever" the basic attack ability for those of a trout.

Proggy coming up!

===========[] LumbrigeFlyFisher 1,0 []===========
[+] By BMWxi [+] Status: Going to SouthSpot
==============================================
[] Fishing XP Earned: 32840 Per Hour: 36132
[] Salmon Caught: 223 Per Hour: 245
[] Trout Caught: 320 Per Hour: 352
[] Loads: 25 Per Hour: 27
[] Total Time: 54 min 32 sec
==============================================

Thanks, I'm glad you like it :) and iirc it should place the fish in the slot itself if it hasn't dropped them properly.

I'm getting an access violation. Just wondering if anyone has ideas on how to fix this.



Uploaded with ImageShack.us

[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(282:145): Invalid number of parameters at line 281
Compiling failed.

im getting this error what should i do?

[Error] C:\Simba\Includes\SRL\SRL\misc\SmartParams.Simba(78:8): Unknown identifier 'RSReady' at line 77
Compiling failed.

now this error.

From: yatesy101
[Error] C:\Simba\Includes\SRL\SRL\misc\SmartParams.Simba(78:8): Unknown identifier 'RSReady' at line 77
Compiling failed.

now this error.

That's because you pressed run while in the SmartParams.simba tab.

Close the SmartParams.simba tab, then scroll to the very top of my script. Change

{$DEFINE SMART}

to

{$DEFINE SMART8}

Save it, then press run.

90 to 99 fishing thanks to this script! :D

Awesome script been running for 10 hours now I love you BMW! :D
Will post a proggy when I reach around 15 hours :)

9 hour and 46 min proggy for ya :D
[ATTACH=CONFIG]21805[/ATTACH]

From: angelaelikutty
90 to 99 fishing thanks to this script! :D

Awesome, thank you for telling me! And grats! :D

From: evoke99s
9 hour and 46 min proggy for ya :D
[ATTACH=CONFIG]21805[/ATTACH]

Nice, thanks for the proggy!

when walking over bridge it clicks behind the rock any way to make it so it clicks further down the river?

From: evoke99s
when walking over bridge it clicks behind the rock any way to make it so it clicks further down the river?

The SPS path would need to be changed a bit, nothing more than that. If I told you the line to change and what to change it to would you be able to do that? :)

From: BMWxi
The SPS path would need to be changed a bit, nothing more than that. If I told you the line to change and what to change it to would you be able to do that? :)

should would!
if you could do that id appreciate it!

From: evoke99s
should would!
if you could do that id appreciate it!

Go to line 229 and replace

ToRiver := [Point(161, 205), Point(191, 200), Point(225, 192), Point(255, 190), Point(266, 211)];

with this:

ToRiver := [Point(179, 194), Point(186, 196), Point(194, 197), Point(204, 194), Point(214, 191), Point(226, 189), Point(234, 188), Point(245, 190), Point(255, 190), Point(268, 190), Point(277, 190), Point(277, 198), Point(272, 203), Point(268, 208), Point(268, 216)];

From: BMWxi
Go to line 229 and replace

ToRiver := [Point(161, 205), Point(191, 200), Point(225, 192), Point(255, 190), Point(266, 211)];

with this:

ToRiver := [Point(179, 194), Point(186, 196), Point(194, 197), Point(204, 194), Point(214, 191), Point(226, 189), Point(234, 188), Point(245, 190), Point(255, 190), Point(268, 190), Point(277, 190), Point(277, 198), Point(272, 203), Point(268, 208), Point(268, 216)];

testing out ASAP ill let you know how it goes, THANKS! :spot::f:

E: Still wants to click behind that damn rock. Ill see if i can create my own theres gotta be some tutorial on SPS somewhere.

E1: Made my own SPS walk to river points, fourth load and hasn't clicked behind rock, so far so good! makes it look like less of a
bot when it doesn't click behind that rock every time. well anyways if you want here is the SPS walk path i made! (DEFINITELY WORTH A LOOK AT AND MAYBE IMPLEMENTING?)

ToRiver := ToRiver := [Point(165, 201), Point(206, 197), Point(222, 196), Point(282, 195), Point(266, 218)];

From: evoke99s
testing out ASAP ill let you know how it goes, THANKS! :spot::f:

E: Still wants to click behind that damn rock. Ill see if i can create my own theres gotta be some tutorial on SPS somewhere.

E1: Made my own SPS walk to river points, fourth load and hasn't clicked behind rock, so far so good! makes it look like less of a
bot when it doesn't click behind that rock every time. well anyways if you want here is the SPS walk path i made! (DEFINITELY WORTH A LOOK AT AND MAYBE IMPLEMENTING?)

ToRiver := ToRiver := [Point(165, 201), Point(206, 197), Point(222, 196), Point(282, 195), Point(266, 218)];

Not sure while mine was doing that, nice job on making your own though :)

it starts and about 35 minutes through, it executes saying teleported to many times not finding bank, how do i fix this?

E: It walks to chest fine, doesn't click or want to try to deposit, Just keeps tele'ing and goes to chest, re-tele'ing. then executes?

From: AnonymousUser
it starts and about 35 minutes through, it executes saying teleported to many times not finding bank, how do i fix this?

E: It walks to chest fine, doesn't click or want to try to deposit, Just keeps tele'ing and goes to chest, re-tele'ing. then executes?

I haven't used it for a long time, I'm going to see what happens when I use it. It probably needs fixing.

From: BMWxi
I haven't used it for a long time, I'm going to see what happens when I use it. It probably needs fixing.

This is what it says,

" Failed to Teleport too many times, logging out. "

From: AnonymousUser
This is what it says,

" Failed to Teleport too many times, logging out. "

When you teleport, is there a blinking yellow arrow on the minimap pointing to the combat instructor?

From: BMWxi
When you teleport, is there a blinking yellow arrow on the minimap pointing to the combat instructor?

Yes sir, I don't know how to get it away. I've talked to the instructor but i'm not sure how far to go to be able to still use the deposit chest.

From: AnonymousUser
Yes sir, I don't know how to get it away. I've talked to the instructor but i'm not sure how far to go to be able to still use the deposit chest.

Ok, I was just checking because the script uses that arrow to check that it has successfully teleported. I'm running it, it has completed two runs without issue so far so I'm going to run it for awhile. I'll post back in an hour or so to tell you how it's doing.

From: BMWxi
Ok, I was just checking because the script uses that arrow to check that it has successfully teleported. I'm running it, it has completed two runs without issue so far so I'm going to run it for awhile. I'll post back in an hour or so to tell you how it's doing.

Thank You. It usually runs for 17-45 minutes. Then executes.

From: AnonymousUser
Thank You. It usually runs for 17-45 minutes. Then executes.

Running for an hour fine so far. The only issues that I've had so far is that sometimes it runs behind the rock instead of going right to the river but that corrects quite fast and has only happened once that I saw.

From: BMWxi
Running for an hour fine so far. The only issues that I've had so far is that sometimes it runs behind the rock instead of going right to the river but that corrects quite fast and has only happened once that I saw.

The pathing still seems to be off finding the north fishing spawns. If it would click on the mini map in the area between the north fish icon and the oak tree to the right of it I believe this would eliminate the problems finding this spawn.

Another issue that if implemented would make it more realistic is making it check the location of the last fish spawn it fished from after dropping to see if its still there to continue fishing. Having it drop then run north looks funny when there's an available spawn in front of you.

Sometimes it'll go on break and relogin only to say it has run out of feathers when it hasn't.

Otherwise great exp/hr avg around 48k, fixing these minor changes would definitely step this script up a notch.

From: corrupt16
The pathing still seems to be off finding the north fishing spawns. If it would click on the mini map in the area between the north fish icon and the oak tree to the right of it I believe this would eliminate the problems finding this spawn.

Another issue that if implemented would make it more realistic is making it check the location of the last fish spawn it fished from after dropping to see if its still there to continue fishing. Having it drop then run north looks funny when there's an available spawn in front of you.

Sometimes it'll go on break and relogin only to say it has run out of feathers when it hasn't.

Otherwise great exp/hr avg around 48k, fixing these minor changes would definitely step this script up a notch.

It should run north/south only when it can't find a fishing spot, but I'll just look to make sure I didn't make a mistake.

As for the feathers thing, that is because sometimes the feathers load significantly after the script has detected that it is logged in. I can fix this by making it wait a bit and then checking again if it doesn't see feathers the first time.

From: BMWxi
It should run north/south only when it can't find a fishing spot, but I'll just look to make sure I didn't make a mistake.

As for the feathers thing, that is because sometimes the feathers load significantly after the script has detected that it is logged in. I can fix this by making it wait a bit and then checking again if it doesn't see feathers the first time.

" Successfully teleported to the Bank Chest
Staring WalkToBank procedure
Walking to the Chest using DTMs
At Chest
Staring DepositFish procedure
Staring BankChestTele procedure
Failed to Teleport too many times, logging out.
Successfully executed. "

1 Hr 16 min. Proggy of executing.

Seems that upping CPU priority to max on the Smart client seems to help finding the spawns, fixing one of my issues. Maybe you should suggest this as a recommendation on your first post to migrate similar problems.

From: AnonymousUser
" Successfully teleported to the Bank Chest
Staring WalkToBank procedure
Walking to the Chest using DTMs
At Chest
Staring DepositFish procedure
Staring BankChestTele procedure
Failed to Teleport too many times, logging out.
Successfully executed. "

1 Hr 16 min. Proggy of executing.

Lol I misspelled "starting" in each of those WriteLns :p

And yeah I'll look at that. I'll wait until RS3 though, that's only in a few days.

From: corrupt16
Seems that upping CPU priority to max on the Smart client seems to help finding the spawns, fixing one of my issues. Maybe you should suggest this as a recommendation on your first post to migrate similar problems.

I'll add this to the OP, thank you. :)

Didn't even notice you misspelled "Starting" Ha! I'll check it out, and post a proggy after a few hours, if it will do so!