SRL Archive - RS3 Outdated / Broken Scripts

About

My AIO is pretty bad right now (or atleast unreliable), so as alot of you request gold ore - bar scripts for xp, here you go :)

should be 99% flawless? I've tested alot, maybe a dtm will break, who knows


SetUp

EoC Ability bar minimized! RS zoomed out to max Put Gold Ore in Top Right Of Bank, Fill in login information, post a proggy! should be that simple :)

Required Graphics Setup Pic :

Found Here


Known Bugs

[LIST]
None
reminder to myself - Paint barsmade overlaps xp earned - will move in next release
[/LIST]

Versions

V1.0 - Initial Re-Write Release
V1.1 - ATPA Tweaks
V1.1asteelbarmod - custom mod for request (can make any bar if tiny script knowledge)
V1.1a - camera efficiency and DTM tweaks
V2.0 - Complete Re-Write
V2.1 - Tweaked colors should always detect both bankers and furnace now
V2.2 - Out of Ore and AFK Failsafes

Proggies

From: Fate
***************DannyRS-EdgeBarSmelter*****************
* Version: V2.1
* Time Running: 76 Hours, 13 Minutes and 43 Seconds
* BarsMade : 89936
* BarsMade/ H : 1180
* Smithing XP : 5054403
******************************************************

From: footballjds

From: epi
***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 17 Hours, 34 Minutes and 38 Seconds
* BarsMade : 20412
* BarsMade/ H : 1161
* Smithing XP : 1147154
******************************************************

From: withzisthumb

***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 10 Minutes and 21 Seconds
* BarsMade : 168
* BarsMade/ H : 973
* Smithing XP : 9442
******************************************************

From: withzisthumb

***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 16 Hours, 14 Minutes and 34 Seconds
* BarsMade : 18452
* BarsMade/ H : 1136
* Smithing XP : 1037002
******************************************************

Suggestions To Add

None
if you want to make a suggestion you can post it and I'll add it when i can (Probably Crafting Support?)

Nice dude! This goes well with Ashaman's LRC miner, good choice of script to write!

I'll try it out soon!

From: mr. pali
Nice dude! This goes well with Ashaman's LRC miner, good choice of script to write!

I'll try it out soon!

i look forward to your test :)

need someone asap to atleast SMART launch it, so i know i didn't mess up any of the Image names for download Etc Etc, Thanks :)

From: DannyRS
i look forward to your test :)

need someone asap to atleast SMART launch it, so i know i didn't mess up any of the Image names for download Etc Etc, Thanks :)

So many unused variables…
ran it to check it downloads for you. It works fine for me

From: The Killer
So many unused variables…
ran it to check it downloads for you. It works fine for me

thanks for the check, i know I'll remove em sometime lol

Edit - re-uploaded with all my un-used gone?

From: DannyRS
thanks for the check, i know I'll remove em sometime lol

Edit - re-uploaded with all my un-used gone?

Good job :), You'll find that it is easier to read, update and understand if there is no unused variables

From: The Killer
Good job :), You'll find that it is easier to read, update and understand if there is no unused variables

Personally, i use the side bar to locate functions, and my debug clears on compile, so it makes no difference to me :), but i understand for others reading my work it is an important thing to do

I start it and this is what i get
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(274:149): Invalid number of parameters at line 273
Compiling failed.

From: DarkKnight
I start it and this is what i get
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(274:149): Invalid number of parameters at line 273
Compiling failed.

OP made script for SMART8

On line 3, remove the '8' and re-run

From: [J]ustin
OP made script for SMART8

On line 3, remove the '8' and re-run

Yea, although if i implemented the paint slightly wrong, that may crash it on 7.2

For me, it takes gold ores out of the bank, then it doesnt move anywhere outside of the bank. It just adjusts the camera and keeps banking ores.

From: Triblouge
For me, it takes gold ores out of the bank, then it doesnt move anywhere outside of the bank. It just adjusts the camera and keeps banking ores.

sounds like your graphics are wrong

It still behaves the same way.
The debug produced this x4 without ever leaving the banking position. I could have screwed up my smart8.0 though, i just want to know if this is happening to anyone else



failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
failed to see bank All button
Failed to See BankAllButton after 20
Reached End of Main Loop
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll Within 10 Tries Resetting
Crafting…
waiting for EoC crafting UI to close
We have no bars after crafting?, trying to reset
Successfully executed.

Can you codetag your debug,

i just updated and tested, was working fine

can you run this for me: http://villavu.com/forum/showthread.php?t=93908

I ran the SimpleGraphicsChecker and it spawned a client and said 3.. 2.. 1.. and then stopped the script. Didn't even log in.

I'm assuming that i somehow messed up smart 8.0 when i updated it :duh:

From: Triblouge
I ran the SimpleGraphicsChecker and it spawned a client and said 3.. 2.. 1.. and then stopped the script. Didn't even log in.

I'm assuming that i somehow messed up smart 8.0 when i updated it :duh:

log yourself in and run it lol, disable smart, log in, re-enable, run

You are a wise man indeed :o

Edit: it didn't change anything haha

From: Triblouge
You are a wise man indeed :o

Edit: it didn't change anything haha

if the graphics checker wont run, re-install Simba and smart, somethings broke

No, the graphics checker worked, but it didn't change any of the graphics settings

From: Triblouge
No, the graphics checker worked, but it didn't change any of the graphics settings

did the log say this?

Graphics Seem Correct Now

Yeah, it checked a few times then resulted with that

From: Triblouge
Yeah, it checked a few times then resulted with that

then i need more detail whats happening when you try to run this to smelt

Alright, ill post as much as it gives me

In code this time :D

Welcome To EdgeGoldSmelter by DannyRS
Starting in 3...
Starting in 2...
Starting in 1...
We have no ore, or have a bar for some reason, trying to reset
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
Banking All
Closing Bank
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll Within 10 Tries Resetting
Crafting...
waiting for EoC crafting UI to close
We have no bars after crafting?,  trying to reset
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
Banking All
Closing Bank
We Saw The Furnace
We Failed to See The Furnace
We Saw The Furnace
We Failed to See The Furnace
We Saw The Furnace
We Failed to See The Furnace
Error: Out Of Range at line 496
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3, 4]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, 4, 5]

did you start with a full inventory of ore in inventory in the bank?

did it rotate the camera so it could see the furnace?

i started with nothing in invy, and it did rotate the camera to the furnace. I'm gonna redownload all my simba stuff because no scripts have worked for me today. It's most likely an issue with me, not your script.

y invy was empty when i started, and it rotated the camera pretty much the entire time the script ran, so it was looking for the bank and the furnace, but im gonna redownload all my simba stuff because im pretty sure its a mistake on my client, not the script. No scripts have been working for me since i updated to v8.0

I started with an empty invy and it did rotate toward the furnace and bank, i believe the problem lies within my own version of smart 8.0, it has nothing to do with the script

Try reinstalling simba and smart then :)

sorry for the triple post haha, didnt see the other page :duh:

From: Triblouge
sorry for the triple post haha, didnt see the other page :duh:

No worries, let me know if you get it working or if you need any help setting up simba :)

From: Triblouge

Welcome To EdgeGoldSmelter by DannyRS
Starting in 3...
Starting in 2...
Starting in 1...
We have no ore, or have a bar for some reason, trying to reset
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
Banking All
Closing Bank
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll Within 10 Tries Resetting
Crafting...
waiting for EoC crafting UI to close
We have no bars after crafting?,  trying to reset
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
We Failed to See The Bank
We Saw The Bank
Banking All
Closing Bank
We Saw The Furnace
We Failed to See The Furnace
We Saw The Furnace
We Failed to See The Furnace
We Saw The Furnace
We Failed to See The Furnace
Error: Out Of Range at line 496
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3, 4]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, 4, 5]

Try updating that DTM's yourself. I had a similar issue and that seemed to fix it.

From: OGxGURU
Try updating that DTM's yourself. I had a similar issue and that seemed to fix it.

i believe his simba install was messed up, is the included dtm not working? :(

I'll replace it later i guess

UPDATED

tweaks made to 1.1 to fix some random errors, 1.1a should be good to go

steelbar modification version added for a request, setup explained on line 14, iron topright coal below, previously withdrawn 9 iron

Banking All
Closing Bank
Reached End of Main Loop
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll Within 10 Tries Resetting

From: e101y7
Banking All
Closing Bank
Reached End of Main Loop
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll
Failed to See CraftAll Within 10 Tries Resetting

Is your EoC Production Interface Turned On?

if by that you mean is my eoc bar open, no. Basically it stands next to the bank and cannot find the furnace (i think)

From: e101y7
if by that you mean is my eoc bar open, no. Basically it stands next to the bank and cannot find the furnace (i think)

no i mean when u use furnace, new GUI?

zoom rs out to max

okay, my gui is the one with all the bars on the right and the smelt button and it is zoomed out to max, as in your instructions pic.

The issue is when i am standing next to the bank and looking at the furnace it appears not to be able to click on the furnace

From: e101y7
okay, my gui is the one with all the bars on the right and the smelt button and it is zoomed out to max, as in your instructions pic.

The issue is when i am standing next to the bank and looking at the furnace it appears not to be able to click on the furnace

hmm, does it rotate camera so it can see the furnace top left of screen?

yes but i do not move there

From: e101y7
yes but i do not move there

it never right clicks the furnace?

i dont think so, infact a leftclick would even work but it does neither

From: e101y7
i dont think so, infact a leftclick would even work but it does neither

does it move the mouse to it?

im not sure but i dont think so. I believe the mouse moves to the middle of where the eoc combat interface would be around the middle of the scrren

YES WORKING. i ran your graphics setup thingy. Not sure if that fixed it (it didnt appear to change anything) but as of now it is completing runs!!!!!!

From: e101y7
YES WORKING. i ran your graphics setup thingy. Not sure if that fixed it (it didnt appear to change anything) but as of now it is completing runs!!!!!!

weird, leme know if it keeps going! :)

For anyone else interested, using the steel bar smither, you can create any other type of bar. Simply change the iron to mithr,adddy etc, change the withdraw x to the correct number per inventory and then the withdraw all coal command will provide the remainder of coal.

From: e101y7
For anyone else interested, using the steel bar smither, you can create any other type of bar. Simply change the iron to mithr,adddy etc, change the withdraw x to the correct number per inventory and then the withdraw all coal command will provide the remainder of coal.

Good things come to those with a brain :)

Hmm wonder how fast 99 will be with this script :p

From: [XoL]
Hmm wonder how fast 99 will be with this script :p

hopefully as fast as you can with gold ;)

sorry i get this error:

[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(274:149): Invalid number of parameters at line 273
Compiling failed.

any ideas on a fix?
thanks

edit:::: sorry i found out how now.

From: moloco


edit:::: sorry i found out how now.

Good Good ;) Let me know if it works ok for you, some people had some issues before with some camera angles, make sure your zoomed out to the max!

If anythings not working well then leave feedback let me know so i can improve it ! :p

From: DannyRS
Good Good ;) Let me know if it works ok for you, some people had some issues before with some camera angles, make sure your zoomed out to the max!

If anythings not working well then leave feedback let me know so i can improve it ! :p

The scirpt seems to be working however it missclicks the banker alot but eventually gets it so thats not a problem.

But the problem is that it never finishes the whole invent of bars… usually only gets about 10 and banks :S i have no idea why haha

any ideas?
thansk

From: moloco
The scirpt seems to be working however it missclicks the banker alot but eventually gets it so thats not a problem.

But the problem is that it never finishes the whole invent of bars… usually only gets about 10 and banks :S i have no idea why haha

any ideas?
thansk

Banking will click randomly till it finds the bank option, takes longer the more crowded it is,

Most likely your EoC Production window is diabled? Turn it on see if it finishes an inventory?

just to let you know you have this in the setup instructions "EoC Ability bar minimized!"

also it still doesn't do full invents - is there something i should put on the ability bar?

few other minor problems:
sometimes fails to find furnace and stops script
searches for bank while smelting and before rotating the screen (right clicks randomly north of the furnace by the trees looking for bankwoman)

ahh the script juse doesnt want to work for me :/

thanks for the help

From: moloco
just to let you know you have this in the setup instructions "EoC Ability bar minimized!"

also it still doesn't do full invents - is there something i should put on the ability bar?

few other minor problems:
sometimes fails to find furnace and stops script
searches for bank while smelting and before rotating the screen (right clicks randomly north of the furnace by the trees looking for bankwoman)

ahh the script juse doesnt want to work for me :/

thanks for the help

Not the ability bar, the "production" window that was added in EoC, toggle that on, I'm not sure how because I've never disabled it, maybe right click the XP icon for an option? (or try googling it), then give it a try?

As for the not finding the furnace, make sure your graphics are correct and your screen size is set to fixed, Some other people had this issue tho so i will have to investigate it when i get time

From: DannyRS
Not the ability bar, the "production" window that was added in EoC, toggle that on, I'm not sure how because I've never disabled it, maybe right click the XP icon for an option? (or try googling it), then give it a try?

As for the not finding the furnace, make sure your graphics are correct and your screen size is set to fixed, Some other people had this issue tho so i will have to investigate it when i get time

i just turned this production window on

now it withdraws ore from the bank
then says
failed to see craftall
failed to see craftall
…
…
after it resets it banks the ore, with draws again. and fails to see craft all again :/

im zoomed out. production window on. ability bar minimised.
ive removed the 8 from the 3rd line where it says {$Define SMART8}

From: moloco
i just turned this production window on

now it withdraws ore from the bank
then says
failed to see craftall
failed to see craftall
…
…
after it resets it banks the ore, with draws again. and fails to see craft all again :/

im zoomed out. production window on. ability bar minimised.
ive removed the 8 from the 3rd line where it says {$Define SMART8}

I'll have a look when i get on, but if you remove the smart 8, remove it from the first time its stated, i cant guarentee it will work on 7.2 as i only use 8 these days, it should withdraw ore, then rotate camera to see furnace, click the furnace, wait, click the window, wait till finished, then bank and repeat, double check your settings and i would recommend you re download it and dont make any changes and update to the latest smart version

Sorry does anyone have a link or guide for smart 8((the newest one?))

From: moloco
Sorry does anyone have a link or guide for smart 8((the newest one?))

I believe its located here

http://villavu.com/forum/showthread.php?t=87801

Hello im getting this error report

We Failed to See The Furnace
Error: Out Of Range at line 497
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, SRL - Options Bitmap, 5, 6].

Smart V8 im using and correct graphics settings. Sometimes it will find it but most of the time it doesnt. any thoughts?

From: beeb101

Smart V8 im using and correct graphics settings. Sometimes it will find it but most of the time it doesnt. any thoughts?

I Made some noob mistakes try latest version, cant actually compile myself to check atm tho ;)

You should add iron support, gold is a deficit…

From: ___
You should add iron support, gold is a deficit…

you can easily add it yourself if u want ;)

thanks for the script bro 1.1b seems to be working fine

just a suggestion: it would be good if you could put varrock armour support in as this makes the invents faster. atm when i wear varrock armour and he finishes all the bars it still waits around for a while before banking, so its faster and more exp/hr :)

thanks

Edit: I do have some bugs
He clicks the bank too far from the furnace then fails to see the furnace and it never manages to click the first banker on the first run … One time it did and it worked fine for 15mins then logged out – not sure why

I'll have a look at a furnace finding failsafe ;)

It should always be able to see it if you have max zoom and fog off, i was fairly sure i checked the very bottom of the bank and could still see it

From: DannyRS
you can easily add it yourself if u want ;)

Ooooh, thats some of the best advice I've heard all week :)
Yeah after fletching and that fight caves script you did, I may give this a run or two. You are a script machine.

From: ___
Ooooh, thats some of the best advice I've heard all week :)
Yeah after fletching and that fight caves script you did, I may give this a run or two. You are a script machine.

Still not quite ashaman ;)

From: The Killer
Still not quite ashaman ;)

I'll catch him one day :p

From: DannyRS
I'll have a look at a furnace finding failsafe ;)

It should always be able to see it if you have max zoom and fog off, i was fairly sure i checked the very bottom of the bank and could still see it

The problem was when there were many people at the furnace; try a popular world when testing. (At least this is how I replicated the problem)

From: [XoL]
The problem was when there were many people at the furnace; try a popular world when testing. (At least this is how I replicated the problem)

yea good idea will do :p

From: mrc0x
It doesn't find the furnace in most cases at all. Even if there is nobody else. Are you searching for the flames or the stones of the furnace?

The flames, make sure your graphics are correct, also you could try and change the "FurnaceUp" procedure, find the "FindColorsTolerance" in that and the "MSX2-150" change it to just "MSX2"

Need to update this to my latest scripting abilities, its on the To-Do :)

From: mrc0x
Fixed

what was it?

Sorry if this was already fixed but I haven't done this in a while and cant figure out this error :
[Hint] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(264:3): Variable 'PARAMS' never used at line 263
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(284:3): 'BEGIN' expected at line 283
Compiling failed.

From: mrc0x
just downloaded again.
now i have the same failure again
Welcome To EdgeGoldSmelter by DannyRS
Failed to See CraftAll Within 10 Tries Resetting

Turn EOC Craft UI On?

From: mrc0x
Yea ofcourse. the problem is not the production dialog, it doesn't see the furnance at all

When i get time I'll re-write this so it's cleaner, guess its broke

[Error] C:\Simba\Includes\SRL\SRL\misc\SmartParams.Simba(78:8): Unknown identifier 'RSReady' at line 77
Compiling failed. Can Anyone Help Me get This Script Working, Do I Change It From Rs Ready To SOmething Else On Line 77 Or What?

From: Outkast1990
[Error] C:\Simba\Includes\SRL\SRL\misc\SmartParams.Simba(78:8): Unknown identifier 'RSReady' at line 77
Compiling failed. Can Anyone Help Me get This Script Working, Do I Change It From Rs Ready To SOmething Else On Line 77 Or What?

Try forcing an update on simba and SRL, and update to smart 8.0 if its not included yet

This doesn't work at all for me…

I've complete ROTM if that makes a difference… (gfx in edgeville are different after that quest)

From: footballjds
This doesn't work at all for me…

I've complete ROTM if that makes a difference… (gfx in edgeville are different after that quest)

That could be a problem, this needs a re-write I'll do it this weekend

From: Outkast1990
[Error] C:\Simba\Includes\SRL\SRL\misc\SmartParams.Simba(78:8): Unknown identifier 'RSReady' at line 77
Compiling failed. Can Anyone Help Me get This Script Working, Do I Change It From Rs Ready To SOmething Else On Line 77 Or What?

You've Put the '8' at the wrong script. (Smartgraph)
Needs to be at Danny's Script.
Since u have one post, don't know if u would read this lol

From: DannyRS
That could be a problem, this needs a re-write I'll do it this weekend

I personally think you've over complicated a 500 line script :p

From: footballjds
I personally think you've over complicated a 500 line script :p

Yea I was new to srl when i made, I'll write a real one later tonight,

just re-wrote my Fletcher like 1500 lines - 700 :p

Double post sorry, can a mod delete my above post,

Re-Written, UPDATED V2.0

@footballjds

Near 1000 Lines :( but it has alot of flights mouse stuff, more my current script skill level, you may have to edit the furnace colors if they are not red on the roof, give it a go now, put it in bank ore top right and press go :)

Feel free to edit "WaitCrafting" function to Include whatever anti-bans you want :p

Going to add coal support to support making all types of bars when I have time ;)

From: DannyRS
Double post sorry, can a mod delete my above post,

Re-Written, UPDATED V2.0

@footballjds

Near 1000 Lines :( but it has alot of flights mouse stuff, more my current script skill level, you may have to edit the furnace colors if they are not red on the roof, give it a go now, put it in bank ore top right and press go :)

Feel free to edit "WaitCrafting" function to Include whatever anti-bans you want :p

Going to add coal support to support making all types of bars when I have time ;)

Great, I'll give it a run now. :)

So 2.0 Re-Write working? Finding furnace and bank ok? Safe to add other options? Any suggestions or tweaks you guys want?

Running like a dream…. Will keep this updated.
***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 10 Minutes and 21 Seconds
* BarsMade : 168
* BarsMade/ H : 973
* Smithing XP : 9442
******************************************************

EDIT: 2 hours later

***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 2 Hours, 39 Minutes and 12 Seconds
* BarsMade : 3052
* BarsMade/ H : 1150
* Smithing XP : 171522
******************************************************

Update again:

***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 5 Hours, 31 Minutes and 16 Seconds
* BarsMade : 6272
* BarsMade/ H : 1136
* Smithing XP : 352486
******************************************************

About to find out if SixHourFix will do its job!

From: DannyRS
So 2.0 Re-Write working? Finding furnace and bank ok? Safe to add other options? Any suggestions or tweaks you guys want?

I sold all my gold ore from LRC when the first vers didn't work :redface:

From: footballjds
I sold all my gold ore from LRC when the first vers didn't work :redface:

Lol! (EDIT: most meaningless post ever sorry)

From: withzisthumb
Running like a dream
About to find out if SixHourFix will do its job!

Let me know if it doesent :p its the same as I currently use in all my scripts now and it works fine for me so i can't see why it would break it :p

From: footballjds
I sold all my gold ore from LRC when the first vers didn't work :redface:

Aww, sorry I let you down :( was to n00b scripter when i originally made this to get it flawless

This is really strange, but it's happening. Whenever it hits six hours and restarts SMART, it inputs user information and logs in, but instead of hitting "PLAY!" it presses the "Membership" tab again and again endlessly. I come back and there are hundreds of tabs open in my browser telling me that my subscription is active. Any idea what could be causing this? I've never seen anything like it.

From: withzisthumb
This is really strange, but it's happening. Whenever it hits six hours and restarts SMART, it inputs user information and logs in, but instead of hitting "PLAY!" it presses the "Membership" tab again and again endlessly. I come back and there are hundreds of tabs open in my browser telling me that my subscription is active. Any idea what could be causing this? I've never seen anything like it.

I believe its a loginplayer SRL bug, are you using smart8 or smart7.2?, I don't have this issue anymore on smart8.0

I honestly can't remember, I'll get back to you on that.

***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 17 Hours, 34 Minutes and 38 Seconds
* BarsMade : 20412
* BarsMade/ H : 1161
* Smithing XP : 1147154
******************************************************
Great Script. Thanks

From: epi
***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 17 Hours, 34 Minutes and 38 Seconds
* BarsMade : 20412
* BarsMade/ H : 1161
* Smithing XP : 1147154
******************************************************
Great Script. Thanks

Awesome, thanks for taking the time to come back and post a proggy ;)

From: DannyRS
Awesome, thanks for taking the time to come back and post a proggy ;)

I'll be using this to gain some smithing levels now :)

From: footballjds
I'll be using this to gain some smithing levels now :)

Let me know how it goes, and any performance/efficiency suggestions appreciated as I dont legit RS ever anymore ;)

From: DannyRS
Let me know how it goes, and any performance/efficiency suggestions appreciated as I dont legit RS ever anymore ;)

you could do a check to see if you have items in your inv before deposit-all. (only noticeable on first banking)

I had quite a few proggies but kinda lost em. :/

EDIT:

***************DannyRS-EdgeBarSmelter*****************
*                Version: V2.0
* Time Running: 1 Hours, 18 Minutes and 45 Seconds
*    BarsMade : 1540
* BarsMade/ H : 1173
* Smithing XP : 86548
******************************************************

stopped to update ports :p

I tried to start it again but it won't find the furnace and it always uses the second to most northern banker. I just re-spawned a client so I assume your color tolerances need tweaked. I'll continue mining for now.

From: footballjds
you could do a check to see if you have items in your inv before deposit-all. (only noticeable on first banking)

I had quite a few proggies but kinda lost em. :/

EDIT:

***************DannyRS-EdgeBarSmelter*****************
*                Version: V2.0
* Time Running: 1 Hours, 18 Minutes and 45 Seconds
*    BarsMade : 1540
* BarsMade/ H : 1173
* Smithing XP : 86548
******************************************************

stopped to update ports :p

I tried to start it again but it won't find the furnace and it always uses the second to most northern banker. I just re-spawned a client so I assume your color tolerances need tweaked. I'll continue mining for now.

Really don't want to waste cpu checking inv before deposit just for first run :p,

I guess the bankers and furnace need more tolerance then, I'll tweak them later ;)

From: DannyRS
Really don't want to waste cpu checking inv before deposit just for first run :p,

I guess the bankers and furnace need more tolerance then, I'll tweak them later ;)

waste cpu? you on crack bro?
You check the inv already! (i know for a fact because if it's full of gold you go straight to the furnace) idk if you count the inv or if you use the function to see if it's full. Ether way that is counting the inventory. It's not a waste of cpu.

InvCount takes a ms or less…

@footballjds Tweaked colors should always detect now

From: DannyRS
@footballjds Tweaked colors should always detect now

can you describe how you search/filter the colors? I'm assuming you use TPA's. How many colors must you find? When i reported the bug it was hovering over a player's cape… :p

Yes, I could read through your code but… I'm working and I really think it'd be cool to have you describe it :)

EDIT:
As a rule of thumb i like to test my scripts on crowded worlds, just to ensure accuracy

EDIT2: I think you flow of logic is off with inPin

From: footballjds
can you describe how you search/filter the colors? I'm assuming you use TPA's. How many colors must you find? When i reported the bug it was hovering over a player's cape… :p

ACA relog/reload/pick till cant find any difference, CTS2 TPA - ATPA Sort largest first, checkuptext, click

From: footballjds

EDIT2: I think you flow of logic is off with inPin

Failsafe catches pinscreen so its not checked for every loop, I feel if something is going to happen 1/3000 loops, a check every loop is a waste

If you want it every check, change BankAllButton; to:

Function BankAllButton: Boolean;
Var
  TCount,X,Y: Integer;
Begin
  MarkTime(TCount);
  Repeat Begin
    Wait(RandomRange(100, 200));
    If (PinScreen) Then
            InPin(Players[0].Pin);
  End; Until (FindColorTolerance(X, Y, 4512575, 356, 312, 362, 318, 25)) Or (TimeFromMark(TCount)>5000)
  If (TimeFromMark(TCount)>5000) Then
    Result:=False
  Else
  Begin
    LeftClickSpot(354, 348, 384, 368);
    Result:=True;
    Exit;
  End;
  Result:=False;
End;

It didn't put my pin in once and bugged up.

I can easily add, if PinScreen then InPin

decent proggy:

From: footballjds
It didn't put my pin in once and bugged up.

I can easily add, if PinScreen then InPin

decent proggy:

There was a one line error I spotted when you mentioned it and I read through my code, should work every time if you re-download it :)

I'll add your proggy to OP :)

Got an 8 hr and counting proggy.
What happens when i run out of gold ore?

From: footballjds
Got an 8 hr and counting proggy.
What happens when i run out of gold ore?

You'll need to stop it manually because I never added a check because again it's unlikely anyone would use it without a healthy supply,

Now that I understand how to use uptext tho, I guess I could add a check on the very first run to see how much ore you have, and stop before your completely empty,

I imagine you will stand withdrawing all of the top right and depositing until you stop it manually ;)

FML my laptop isnt with me… Gf account

I had a 14 hour proggy for you but lost it :/

my account was withdrawing/depositing something for who knows how long after i ran out of gold ore… I had like 15k gold ore. Really assumed that scripters used failsafes still…

PLEASE PLEASE FAILSAFE…

one of the absolute easiest fool proof failsafes is a 5 minute timer, or even 10 idc. if nothing for 10 minutes, kill. Personally I'd just right click the "ore slot" and check for the option gold, if it's not there check 2-3 more times, if its still not there terminate.

From: footballjds
FML my laptop isnt with me… Gf account

I had a 14 hour proggy for you but lost it :/

my account was withdrawing/depositing something for who knows how long after i ran out of gold ore… I had like 15k gold ore. Really assumed that scripters used failsafes still…

PLEASE PLEASE FAILSAFE…

one of the absolute easiest fool proof failsafes is a 5 minute timer, or even 10 idc. if nothing for 10 minutes, kill. Personally I'd just right click the "ore slot" and check for the option gold, if it's not there check 2-3 more times, if its still not there terminate.

I'll add one for it when I'm free later, your not going to get banned for that… I end up doing it all the time

There's fail-safes for everything except that atm :/

sounds good, I'll stock up on ores in the meantime.

From: footballjds
sounds good, I'll stock up on ores in the meantime.

V2.2 - Out of Ore and AFK Failsafes

Do we nearly meet footballjds standards yet :p

EDIT - highest pop world I could find

***************DannyRS-EdgeBarSmelter*****************
*                Version: V2.2
* Time Running: 12 Minutes and 23 Seconds
*    BarsMade : 252
* BarsMade/ H : 1220
* Smithing XP : 5670
******************************************************
Successfully executed.

I'm getting almost the max Smithing exp/hr possible with Gold smelting thanks to this script! I'll post a nice proggy some time soon! :)

From: Fate
I'm getting almost the max Smithing exp/hr possible with Gold smelting thanks to this script! I'll post a nice proggy some time soon! :)

Glad to hear it :)

From: DannyRS
V2.2 - Out of Ore and AFK Failsafes

Do we nearly meet footballjds standards yet :p

EDIT - highest pop world I could find

***************DannyRS-EdgeBarSmelter*****************
*                Version: V2.2
* Time Running: 12 Minutes and 23 Seconds
*    BarsMade : 252
* BarsMade/ H : 1220
* Smithing XP : 5670
******************************************************
Successfully executed.

haha, good good, :)
I died mining so i dind't get enough gold. I'll test this sometime over the weekend or next week!

Good work

***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 16 Hours, 14 Minutes and 34 Seconds
* BarsMade : 18452
* BarsMade/ H : 1136
* Smithing XP : 1037002
******************************************************

Still going :O 1M xp say what??

From: withzisthumb
***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 16 Hours, 14 Minutes and 34 Seconds
* BarsMade : 18452
* BarsMade/ H : 1136
* Smithing XP : 1037002
******************************************************

Still going :O 1M xp say what??

;) nice one

***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 24 Hours, 4 Minutes and 9 Seconds
* BarsMade : 26908
* BarsMade/ H : 1118
* Smithing XP : 1512230
******************************************************
Thought you might like a 24 hr proggy to throw on the OP. Thanks again for a great revamped script.

From: withzisthumb
***************DannyRS-EdgeBarSmelter*****************
* Version: V2.0
* Time Running: 24 Hours, 4 Minutes and 9 Seconds
* BarsMade : 26908
* BarsMade/ H : 1118
* Smithing XP : 1512230
******************************************************
Thought you might like a 24 hr proggy to throw on the OP. Thanks again for a great revamped script.

Defo! Will update OP later, thanks alot, thats some insane xp gain lol

***************DannyRS-EdgeBarSmelter*****************
* Version: V2.1
* Time Running: 76 Hours, 13 Minutes and 43 Seconds
* BarsMade : 89936
* BarsMade/ H : 1180
* Smithing XP : 5054403
******************************************************

My internet reset or I would have kept going. :P Very flawless!

From: Fate
***************DannyRS-EdgeBarSmelter*****************
* Version: V2.1
* Time Running: 76 Hours, 13 Minutes and 43 Seconds
* BarsMade : 89936
* BarsMade/ H : 1180
* Smithing XP : 5054403
******************************************************

My internet reset or I would have kept going. :P Very flawless!

Haha! Amazing, will add to OP ;)

Thats alot of bars :p

lost a 17h proggy because i shut off my computer instead of sleeping it -___-

btw, you should add srl stats?

EDIT, that was using 2.1


I'll try out 2.2 now

From: footballjds
lost a 17h proggy because i shut off my computer instead of sleeping it -___-

btw, you should add srl stats?

EDIT, that was using 2.1


I'll try out 2.2 now

:( hate when that happens, http://stats.villavu.com/script/1309/commits

Added a while ago, but the stats server is broken, so we don't get a total time, just commits, and I'm too lazy to setup my own stats site thing

Oh, so you're just letting anon get all the stats instead of letting users? pfffft….

Here's a proggy:

***************DannyRS-EdgeBarSmelter*****************
*                Version: V2.1
* Time Running: 14 Hours, 51 Minutes and 29 Seconds
*    BarsMade : 17052
* BarsMade/ H : 1148
* Smithing XP : 958322
******************************************************

From: footballjds
Oh, so you're just letting anon get all the stats instead of letting users? pfffft….

It's for the script not the users :)

you can manually enter your stat acc if you like

users gain nothing from stats

From: DannyRS
It's for the script not the users :)

you can manually enter your stat acc if you like

users gain nothing from stats

Except the ability to track how long they've botted

Your fail-safe for running out of ores worked.

I'm under 25K away from my smithing goal(90) so I'll finish manually

***************DannyRS-EdgeBarSmelter*****************
*                Version: V2.2
* Time Running: 58 Minutes and 57 Seconds
*    BarsMade : 1092
* BarsMade/ H : 1111
* Smithing XP : 61370
******************************************************
We Are Low On Ore, Terminating

Thank you sir.

From: footballjds
Except the ability to track how long they've botted

Your fail-safe for running out of ores worked.

I'm under 25K away from my smithing goal(90) so I'll finish manually

Thank you sir.

With stats being broke no big deal :p

Amazing Gratz on 90!!

getting this error as soon as i startup
Starting in 1…
Error: Exception: Access violation at line 376
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3, 4]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, SRL - Options Bitmap, 5]

From: tallmantreee
getting this error as soon as i startup
Starting in 1…
Error: Exception: Access violation at line 376
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3, 4]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, SRL - Options Bitmap, 5]

Seems to be an issue with imageshack's website atm, might be that causing it, I'll find the map and attach it to OP, save it as "DREBSSPS" in simba/includes/sps/img/runespace_other/DREBSSPS.png

Edit - @tallmantreee image is now in OP, try the steps in this post and let me know if it runs, maybe change DMP at the top of the script to false aswell ;)

***************DannyRS-EdgeBarSmelter*****************
* Version: V2.2
* Time Running: 6 Hours, 1 Minutes and 38 Seconds
* BarsMade : 7028
* BarsMade/ H : 1166
* Smithing XP : 394974
******************************************************

Awesome script though it has messed up on me 2x. The first time was on my first test run and it somehow opened the action bar, but I was babysitting it so I was able to minimize it manually and continue running the script. The second time I'm not sure what happened but apparently it mis-clicked too far east of the furnace after only 10 inventories because thats where it was when I logged back in. Luckily the fail-safe kicked in and logged out. The above proggy is my best yet. Thanks for the script! Hopping to get 99 with this. I have already gone from 85 to 88 with it!

From: Jange
***************DannyRS-EdgeBarSmelter*****************
* Version: V2.2
* Time Running: 6 Hours, 1 Minutes and 38 Seconds
* BarsMade : 7028
* BarsMade/ H : 1166
* Smithing XP : 394974
******************************************************

Awesome script though it has messed up on me 2x. The first time was on my first test run and it somehow opened the action bar, but I was babysitting it so I was able to minimize it manually and continue running the script. The second time I'm not sure what happened but apparently it mis-clicked too far east of the furnace after only 10 inventories because thats where it was when I logged back in. Luckily the fail-safe kicked in and logged out. The above proggy is my best yet. Thanks for the script! Hopping to get 99 with this. I have already gone from 85 to 88 with it!

Nice ;)

Musta lagged for the action bar I'm guessing, clicking to far east must just be a random SPS missclick, I made a better map of edge, just never got around to adding it to this, I woulda thought it would find it's way back into the furnace room though, guess not :p

Just converted this script so it makes sapphire bracelet works great good job :)

From: tristen8878
Just converted this script so it makes sapphire bracelet works great good job :)

Sweet <3 ;)

***************DannyRS-EdgeBarSmelter*****************
* Version: V2.2
* Time Running: 5 Seconds
* BarsMade : 0
* BarsMade/ H : 0
* Smithing XP : 0
******************************************************

Gives me this without starting up Smart.
If smart is up, and i start it, it just stands in bank doing nothing
graphics are ok…
It starts, but doesnt do anything =-[

HelpHelpHelp!! =-[
Just bought over 100k ores to get me started =-[

From: Ferhya
***************DannyRS-EdgeBarSmelter*****************
* Version: V2.2
* Time Running: 5 Seconds
* BarsMade : 0
* BarsMade/ H : 0
* Smithing XP : 0
******************************************************

Gives me this without starting up Smart.
If smart is up, and i start it, it just stands in bank doing nothing
graphics are ok…
It starts, but doesnt do anything =-[

HelpHelpHelp!! =-[
Just bought over 100k ores to get me started =-[

Sounds like a smart problem not a script one? turn debug to true, what does it say?

From: DannyRS
Sounds like a smart problem not a script one? turn debug to true, what does it say?

Loading Globals
Welcome to EdgeBarSmelter by DannyRS
Starting in 2…
Starting in 1…


Then doesnt do anything after that

Edit:
This comes after like 20 seconds

Error: Exception: Access violation at line 78
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3, 4]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, SRL - Options Bitmap, 5]

did the dtm stuff tho

Edit 2:
Even the V2.1 doesnt start up Smart?

and if I use smart from another script, it doesnt run.

Edit 3: (dont wanna multipost)
When I hit run, it moves my mouse a bit up and to the right side of the screen, but does nothing else.

From: Ferhya
Loading Globals
Welcome to EdgeBarSmelter by DannyRS
Starting in 2…
Starting in 1…


Then doesnt do anything after that

Edit:
This comes after like 20 seconds

Error: Exception: Access violation at line 78
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3, 4]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, SRL - Options Bitmap, 5]

did the dtm stuff tho

Edit 2:
Even the V2.1 doesnt start up Smart?

and if I use smart from another script, it doesnt run.

Edit 3: (dont wanna multipost)
When I hit run, it moves my mouse a bit up and to the right side of the screen, but does nothing else.

Sounds like you need to re-install Simba :/

From: DannyRS
Sounds like you need to re-install Simba :/

Reinstalled..

Now i get this

[Error] C:\Simba\Includes\SRL/SRL/core/globals.simba(696:5): Unknown identifier 'ImageSetClientArea' at line 695
Compiling failed.
[Error] C:\Simba\Includes\SRL\SRL\core\globals.simba(751:13): Unknown identifier 'GetColorToleranceSpeed' at line 750
Compiling failed.

after 3 bars it clicks on the furnace again, each time. could you help me fix it please?

From: Ferhya
Reinstalled..

Now i get this

[Error] C:\Simba\Includes\SRL/SRL/core/globals.simba(696:5): Unknown identifier 'ImageSetClientArea' at line 695
Compiling failed.
[Error] C:\Simba\Includes\SRL\SRL\core\globals.simba(751:13): Unknown identifier 'GetColorToleranceSpeed' at line 750
Compiling failed.

Those are Simba functions built into the program :O you need to reinstall again, try somewhere different on your hard drive

From: masterv11
after 3 bars it clicks on the furnace again, each time. could you help me fix it please?

Turn your EoC crafting production interface on

After re-downloading and removing some lines of tekst (like 2:P) it works as a charm.. dunno what I removed, but damn does it run smooth now

Only thing is, there is no proggy report, nowhere. Not in simba, not as a paint on rs… nowhere =-[

From: Ferhya
After re-downloading and removing some lines of tekst (like 2:P) it works as a charm.. dunno what I removed, but damn does it run smooth now

Only thing is, there is no proggy report, nowhere. Not in simba, not as a paint on rs… nowhere =-[

What two lines did you remove lol, they probably had something to do with it

Kinda dumb question DannyRS … I notice a few of your scripts require materials in the top right … and in a few scripts I think I saw images where the only items in the bank screen were in the top right. I tried to find bank settings but couldnt find out how/where to make it so you could put an item in the top right without having to fill up the other spots???

From: digitalninja
Kinda dumb question DannyRS … I notice a few of your scripts require materials in the top right … and in a few scripts I think I saw images where the only items in the bank screen were in the top right. I tried to find bank settings but couldnt find out how/where to make it so you could put an item in the top right without having to fill up the other spots???

Line 583, RightClickSpot(436, 142, 461, 168);, box around item

From: DannyRS
What two lines did you remove lol, they probably had something to do with it

Running the non-edited version now, just like u posted it in OP…

only get smart client, not that black background, white letter text file thing… (never had on this script tho)

And still no proggy report =-[

Ok.. Did some simple stuff…

Debug True = no proggy.
Debug False= ye proggy

Done a 550k proggy today, then went to work (parents force me to shut down pc) now going for another 100k+ today…

i want 400k a day avg, so this 600k+ day will help me out
i got a week off school, so can run it pretty long i hope.

94 banked now, then selling bars and getting ore for 99:)

From: Ferhya
Ok.. Did some simple stuff…

Debug True = no proggy.
Debug False= ye proggy

Done a 550k proggy today, then went to work (parents force me to shut down pc) now going for another 100k+ today…

i want 400k a day avg, so this 600k+ day will help me out
i got a week off school, so can run it pretty long i hope.

94 banked now, then selling bars and getting ore for 99:)

Nice ;)

Wicked Proggy -

***************DannyRS-EdgeBarSmelter*****************
* Version: V2.2
* Time Running: 10 Hours, 8 Minutes and 31 Seconds
* BarsMade : 12264
* BarsMade/ H : 1209
* Smithing XP : 689237
******************************************************
Successfully executed.

Essentially getting 68k/hour exp …

Left it working for some time, came back, script worked for 2 hours and then stopped.

'Player Idle For Too Long, Terminating'

Found my acc at bank, I guess the error is that the script somehow stops at the bank and then I get this error. :/

On the other hand, it's working like a charm on my laptop

***************DannyRS-EdgeBarSmelter*****************
*                Version: V2.2
* Time Running: 17 Hours, 14 Minutes and 19 Seconds
*    BarsMade : 20020
* BarsMade/ H : 1161
* Smithing XP : 1125124
******************************************************

Just a 20k Gold Bar proggy. :D Thank you for your script :)

Nice script, every… 2-4 bars it will click the furnace and select the smith all option.. again and again..

From: Imsoawsome94
Nice script, every… 2-4 bars it will click the furnace and select the smith all option.. again and again..

Nice setup, nice of you to turn production dialog off. :)

NVM, sorted. Good script so far. :)

Okay, something weird is happening, and I turned Debug on.

WaitCrafting;
Moving Cursor Somewhere While Waiting
We Saw The Banker
Reached End of Main Loop
WaitCrafting;
We Saw The Banker
Player Idle For Too Long, Terminating
Successfully executed.

Nothing too different compared to w/o debug. Anyway, when it terminates, I find my account on the bank screen, and inventory looks like this.


It seems like the bot puts 1 bar in the bank and then somehow bugs out, and stays idle until it hits the timer and script terminates.

However, the issue only happens on my personal computer, on a laptop it works like a champ!

From: Im New Sry
Okay, something weird is happening, and I turned Debug on.

WaitCrafting;
Moving Cursor Somewhere While Waiting
We Saw The Banker
Reached End of Main Loop
WaitCrafting;
We Saw The Banker
Player Idle For Too Long, Terminating
Successfully executed.

Nothing too different compared to w/o debug. Anyway, when it terminates, I find my account on the bank screen, and inventory looks like this.


It seems like the bot puts 1 bar in the bank and then somehow bugs out, and stays idle until it hits the timer and script terminates.

However, the issue only happens on my personal computer, on a laptop it works like a champ!

Most likely caused by having mouse over text turned on, try turning it off

From: Ashaman88
Most likely caused by having mouse over text turned on, try turning it off

Wow, what a fast reply. Thank you mate :) I'll try this :P.

Well what do we have here… Smithing level up, I guess? :)


Bravo, DannyRS! Awesome. :) Well done on such a good script.

From: Im New Sry
Well what do we have here… Smithing level up, I guess? :)
Bravo, DannyRS! Awesome. :) Well done on such a good script.

Haha nice one, Gratz ;) glad I could help you on the path to 99 :p

Without you I wouldn't have made it :)

Hey Danny,

Wanted to say thanks for 99 Smithing. I only used your script a couple times then switched to Killers SuperHeater (for mage and smithing exp). It worked great for me when I used it and wanted to give you credit.

-Crap