SRL Archive - RS3 Outdated / Broken Scripts

Start in Al-Kharid or Edge. Mould in inv if using. Bars visible in bank along with Cannonballs in a tab not in first spot. NEED SMART 8.0+

Testing needed.

CannonballMaker
14 Hours, 1 Minutes and 22 Seconds
P: 0; A: True; C: 29668;

Ver 1.0
  Initial Release.
Ver 1.1
  Added Edgeville support.
Ver 1.11
  Fixed some walking issues.
Ver 1.12
  Bug fixes regarding furnace logic.
Ver 1.13
  More Bug fixes with spending too much time at furnace.
Ver 1.14
  Made runs more efficient, added better failsafe.
Ver 1.15
  Fixed Rare Banking issues.
Ver 1.16
  Fixed a couple small bugs.
Ver 1.17
  Fixed main loop logic.
Ver 1.18
  Fixed bank pin.
Ver 1.19
  Added a longer wait to withdrawing Steel bars.
Ver 1.2
  Added custom randomness and Randomrange to waits.
Ver 1.21
  Can now run for longer then 6 hours.
Ver 1.22
  Added Breaking, needs testing.
Ver 1.23
  Fixed banking?
Ver 1.24
  Fixed breaking.
Ver 1.25
  Fixed For EOC.

Edit : Accidentally deleted alk script, will be back up soon.
Ver 1.25.

Gratz on the release! I might test this on my f2p pure. Keep pumping them scripts out! :)

From: Footy
Gratz on the release! I might test this on my f2p pure. Keep pumping them scripts out! :)

Thanks, be sure to post bugs and proggies :P

Huh. I'll try it :D Except a prog and bug report~

From: zack200
Huh. I'll try it :D Except a prog and bug report~

Thanks :P

From: Kasi
Thanks :P

Issue one. It can't find the bars in my bank xD Is there any information I can give you to help from my end?

From: zack200
Issue one. It can't find the bars in my bank xD Is there any information I can give you to help from my end?

Ah ill change the OP, make sure bars are in a tab along with the Cannonballs, make sure that tab is open.

From: Kasi
Ah ill change the OP, make sure bars are in a tab along with the Cannonballs, make sure that tab is open.

They are both next to each other in the top left corner of my bank :D Tell me when to redownload or such~ ^o^

From: zack200
They are both next to each other in the top left corner of my bank :D Tell me when to redownload or such~ ^o^

Detects them fine for me, i did make a update to the walking however, have you set your graphics up properly? i can assist you over teamviewer if you like.

From: Kasi
Detects them fine for me, i did make a update to the walking however, have you set your graphics up properly? i can assist you over teamviewer if you like.

Skype if anything :p And I'll check, what settings should I be using? I have it fixed, lowest detail, full right room.

From: zack200
Skype if anything :p And I'll check, what settings should I be using? I have it fixed, lowest detail, full right room.

Skype Addy?

From: Kasi
Skype Addy?

tytyvm13
email is [email]zack11695@yahoo.com[/email]

Works well :D

CannonballMaker
1 Hours, 45 Minutes and 7 Seconds
P: 0; A: True; C: 3584;

From: zack200
Works well :D

CannonballMaker
1 Hours, 45 Minutes and 7 Seconds
P: 0; A: True; C: 3584;

Thanks, any more bugs found?

From: Kasi
Thanks, any more bugs found?

Clearly something happened but I wasn't awake for it xD I'm running it now :D

more progg~

CannonballMaker
2 Hours, 7 Minutes and 35 Seconds
P: 0; A: True; C: 4256;

From: zack200
more progg~

CannonballMaker
2 Hours, 7 Minutes and 35 Seconds
P: 0; A: True; C: 4256;

Thanks, bugs?

From: Kasi
Thanks, bugs?

Haven't found any with Edgeville yet :D

Just saw this and letting my friend know, hes been bugging me for this last 2 weeks now while I've been farming :p ill get him to test it for you

More progg~
CannonballMaker
3 Hours, 33 Minutes and 49 Seconds
P: 0; A: True; C: 7392;

I ran out of steel xD

From: zack200
More progg~
CannonballMaker
3 Hours, 33 Minutes and 49 Seconds
P: 0; A: True; C: 7392;

I ran out of steel xD

Ah I updated the logic after your message, it shouldn't mess up on the furnace now

From: Kasi
Ah I updated the logic after your message, it shouldn't mess up on the furnace now

Good to hear :D Should I stop it and start using the new version of the script?

From: zack200
Good to hear :D Should I stop it and start using the new version of the script?

yer use the newest version always :P

Awesome… I will test this and let you know!

edit:
tested out, mouse movements seem too fast, not human enough.
screen spins around 4 times before starts banking
gets stuck in loop of taking out steel bars and putting them back in..

any suggestions?

From: yakkyigooconroy
Awesome… I will test this and let you know!

Thanks

From: yakkyigooconroy
Awesome… I will test this and let you know!

edit:
tested out, mouse movements seem too fast, not human enough.
screen spins around 4 times before starts banking
gets stuck in loop of taking out steel bars and putting them back in..

any suggestions?

Mose movement isn't generally an issue unless it's ludicrous but wut do Iz know. As for the steel bars, it will generally sort itself out given enough time~ I haven't had it been unable to escape the loop at any point, but it definitely does it.

Heads up, it got stuck twice at the furnace after it finished smelting~

From: zack200
Mose movement isn't generally an issue unless it's ludicrous but wut do Iz know. As for the steel bars, it will generally sort itself out given enough time~ I haven't had it been unable to escape the loop at any point, but it definitely does it.

what smart are you using?

8.1 is the version im using

From: yakkyigooconroy
8.1 is the version im using

ah should be fine then, download the latest version? and the mousespeed is random

yea i've just redownloaded it to see if thats it.

Oh ok, idk why it was going so fast then

From: Kasi
what smart are you using?

8.0
PS: I think the banking issue is because it doesn't wait long enough to see if it has the steel bars in the inventory after taking them out.

From: zack200
8.0
PS: I think the banking issue is because it doesn't wait long enough to see if it has the steel bars in the inventory after taking them out.

Added the longer wait in ver 1.19

downloaded new 8.1 and smart was corrupt and had to downgrade to 8.0
and now having problems loading any script.. working on it…

From: yakkyigooconroy
downloaded new 8.1 and smart was corrupt and had to downgrade to 8.0
and now having problems loading any script.. working on it…

i can quickly assist you over teamviewer if you like?

What is the xp/h on this? I'm trying to decide cannonballs or superheating…

From: Footy
What is the xp/h on this? I'm trying to decide cannonballs or superheating…

about 13-14k ph Edgeville, the alk one is pretty outdated as noone tests.

went until I ran out of steel xD
CannonballMaker
3 Hours, 9 Minutes and 7 Seconds
P: 0; A: True; C: 6384;

From: zack200
went until I ran out of steel xD
CannonballMaker
3 Hours, 9 Minutes and 7 Seconds
P: 0; A: True; C: 6384;

Thanks :P ill edit first post when I get on a comp

OK I finally got it working again, all i did was uninstall and reinstall simba and was able to put smart 8.1 in there just fine.

As for the script. I let it do a couple loads
10 Minutes and 31 Seconds
P: 0; A: True; C: 448;

There are somethings that i would def recommend changing to make me more comfortable running for 6 hours.


I noticed that it was doing way too much antiban and turning the camera around *making me sick watching it*I've tested these settings and this is a comfortable amount. This also fixes the Mouse moving too fast. I used RandomGametab procedure w permission from Ollybest.


Line 289 and 526 I would change to

While IsMoving do Wait (RandomRange(100,140));

Another issue i saw was that It wasn't smelting all of the steel bars. Sometimes it would leave 1 or 2.
Changing line 540 and 543 to this fixed it

if (TimeFromMark(Marker) > RandomRange(29*6500,29*7000)) then

Mostly this script seems extremely solid and promising for long proggies. I'll keep you posted with proggies I get from these changes. I'm going to sleep hopefully get a good proggie.

Edit: also added findnormalrandoms; to hide spin ticket window after login.

From: yakkyigooconroy
OK I finally got it working again, all i did was uninstall and reinstall simba and was able to put smart 8.1 in there just fine.

As for the script. I let it do a couple loads
10 Minutes and 31 Seconds
P: 0; A: True; C: 448;

There are somethings that i would def recommend changing to make me more comfortable running for 6 hours.


I noticed that it was doing way too much antiban and turning the camera around *making me sick watching it*I've tested these settings and this is a comfortable amount. This also fixes the Mouse moving too fast. I used RandomGametab procedure w permission from Ollybest.


Line 289 and 526 I would change to

While IsMoving do Wait (RandomRange(100,140));

Another issue i saw was that It wasn't smelting all of the steel bars. Sometimes it would leave 1 or 2.
Changing line 540 and 543 to this fixed it

if (TimeFromMark(Marker) > RandomRange(29*6500,29*7000)) then

Mostly this script seems extremely solid and promising for long proggies. I'll keep you posted with proggies I get from these changes. I'm going to sleep hopefully get a good proggie.

Edit: also added findnormalrandoms; to hide spin ticket window after login.

with the camera it can be toned down a little, its all about preference really, personally i don't keep watch of my smart while it runs. i agree with the RandomRange bit, ill add that to the first post. the timefrommark is perfectly viable, it takes 6 seconds to change a steel bar to 4 cannonballs, i added a extra 6 seconds for purely timeout basis, i do however find it incredibly hard to believe that the script was leaving 1-2 bars out. the actual "exit" is when it finds no bars unless the timeout is hit. ill go through the script and add the randomness to the waits. Thanks for looking through the script.

From: Kasi
I do however find it incredibly hard to believe that the script was leaving 1-2 bars out.

Could have always been lag? :o

From: zack200
Could have always been lag? :o

lag doesnt affect the game ticks, it just affects how you view the game ticks i guess. also lagging for 18 seconds is a bit excessive

From: Kasi
lag doesnt affect the game ticks, it just affects how you view the game ticks i guess. also lagging for 18 seconds is a bit excessive

hehe. Btw, it "Failed to Withdraw Steel Bars"
More or less, it banked, closed the bank, and logged out. There are about 2k steel bars in there xD

Got a great proggie for ya. Suggestion for a Six hour fix?
CannonballMaker
6 Hours, 2 Minutes and 47 Seconds
P: 0; A: True; C: 12096;

Oh! Cool :D Mine worked too! Ran out of steel~

CannonballMaker
4 Hours, 40 Minutes and 20 Seconds
P: 0; A: True; C: 10068;

Another great proggy
CannonballMaker
6 Hours, 1 Minutes and 40 Seconds
P: 0; A: True; C: 12432;

Updated. Can now run for longer then 6 hours.

From: Footy
Gratz on the release! I might test this on my f2p pure. Keep pumping them scripts out! :)

Cannonballs are P2P I think :(

From: Kasi
Updated. Can now run for longer then 6 hours.

Awesome Ill see how long it can go! shootin for 24 hours! Can you add maybe a possible random break in there so that way i dont get banned :P

From: yakkyigooconroy
Awesome Ill see how long it can go! shootin for 24 hours! Can you add maybe a possible random break in there so that way i dont get banned :P

Done, needs testing, Ver 1.22

From: Kasi
Done, needs testing, Ver 1.22

ok Ill let you know.. I just bought the ge limit of 10,000 steel bars!!! w00t!!

Break system doesn't log back into runescape.
I like how it takes a break after finishing a load :D

also it would be nice to add a message at the bottom saying… taking break… break finished.. It would be easier to debug

i changed line 44 to LoginPlayer();

im checking to see if that works

edit: nope it didn't :P

From: yakkyigooconroy
Break system doesn't log back into runescape.
I like how it takes a break after finishing a load :D

also it would be nice to add a message at the bottom saying… taking break… break finished.. It would be easier to debug

i changed line 44 to LoginPlayer();

im checking to see if that works

edit: nope it didn't :P

i think iv fixed it, havent tested it.

When I use the settings, break in 1 min and break for 5 min. It looped like 4 times then it turned the player false and stopped script. So it works on logging back in.

So i changed back to longer settings and ill let you know how it goes, its been running for 5 hours so far.

From: yakkyigooconroy
When I use the settings, break in 1 min and break for 5 min. It looped like 4 times then it turned the player false and stopped script. So it works on logging back in.

So i changed back to longer settings and ill let you know how it goes, its been running for 5 hours so far.

ah okay, is it taking breaks?

Yes it has taken one break, I have the settings to take less breaks but longer breaks

Bug report: Logged out for break, never logged back in (scrip did not end after 8 hours of sitting at logged out screen)
EDIT: It had reached the 6 hour limit, and that is why it was unable to log back in.

From: zack200
Bug report: Logged out for break, never logged back in (scrip did not end after 8 hours of sitting at logged out screen)
EDIT: It had reached the 6 hour limit, and that is why it was unable to log back in.

fml, its really hard to test this, ill try work on a fix in a hour or so.

From: Kasi
fml, its really hard to test this, ill try work on a fix in a hour or so.

Heads up, I was right the first time xD It really does log out every time around 1 hour 54 and then not log back in. xD
EDIT: OR NOT. Idk anymore. It did get lost though~ I think that was a one off though :P

Hey got my proggy today… looks like it only worked for one break then the six hour fix worked…. and then the second break rs was updated and smart failed to load…

8 Hours, 48 Minutes and 3 Seconds
P: 0; A: True; C: 18256;
Welcome to Runescape.
*Character Name*
'Runescape has been updated.'
SRL Compiled in 0 msec
** Fatal Error: Pairing Clients; Terminating Script **
Successfully executed.

This script in it's current version is no longer working.

The banking function works. It will withdraw bars and run to the furnace. It will use the bars on the furnace but after it has made one set of cannonballs it will click the minimap or the steel bars and try to start smelting again. Walking in circles basically.

Just thought I would give you a heads up.

From: Scorched
This script in it's current version is no longer working.

The banking function works. It will withdraw bars and run to the furnace. It will use the bars on the furnace but after it has made one set of cannonballs it will click the minimap or the steel bars and try to start smelting again. Walking in circles basically.

Just thought I would give you a heads up.

ill fix in the morning, thanks for testing.

Edit: i tested, breaking was a bit messed up, tried sorting that out, also i never encountered that problem of running between the bank and furn.

It seems to be working fine now, did you even change anything?

It may have just been an issue specific to my version.

This is a great script by the way! Thank you.

I'll check this new version out tonight and ill let you know how it goes

Because posts: Sent over old alk file~

My computer was put into standby FIVE times while this was running. It came back online without fault each and every time.
CannonballMaker
5 Hours, 32 Minutes and 29 Seconds
P: 0; A: True; C: 11412;

Hey. I just wanted to mention that runescape was just updated today and one of the things updated was the smiting interface. Due to that this script is no longer able to click on the right location to smith the cannonballs. So it gets stuck after you click on the furnace.

From: OGxGURU
Hey. I just wanted to mention that runescape was just updated today and one of the things updated was the smiting interface. Due to that this script is no longer able to click on the right location to smith the cannonballs. So it gets stuck after you click on the furnace.

ah okay, will fix over the weekend, thanks for the feedback
Edit : Updated.

From: Kasi
ah okay, will fix over the weekend, thanks for the feedback
Edit : Updated.

just wonderingg does this script do cballs from ores if not it shud be implemented wud be so much better u cud also make support for coal bag ;)