SRL Archive - RS3 Smithing

Will give it a blast now with ~1K steel bars and let you know.

*edit* Worth noting the bars should be placed in the top right bank slot

From: LDog
Will give it a blast now with ~1K steel bars and let you know.

*edit* Worth noting the bars should be placed in the top right bank slot

Ah crap forgot to put that in the directions, haha thanks!

i will use this script

First things first - Great Script!

A few Proggies-

========AshamanSmither v1.0=========
Time Running: 9 Minutes and 35 Seconds
Making: Steel Platebody
Items Made: 85
Experience Earned: 10313
Experience/Hour: 64550
Items/Hour: 532
====================================
Only actually made 55, script sometimes walks to the anvil waits a few seconds then walks back to banker.

Stopped script at this point to turn on debug to see if I could find out why.

========AshamanSmither v1.0=========
Time Running: 27 Minutes and 1 Seconds
Making: Steel Platebody
Items Made: 190
Experience Earned: 33937
Experience/Hour: 75361
Items/Hour: 422
====================================
Made all 190, not sure if the original error was colour based as the script auto reloads SMART.
Will retry when I have some more bars!


My only suggestion is slowing down the mouse movement from deposit all to withdrawing the bars, maybe I'm over thinking it!

But again - Great Script! ~1200 bars in 40 mins!

From: LDog
First things first - Great Script!

A few Proggies-

========AshamanSmither v1.0=========
Time Running: 9 Minutes and 35 Seconds
Making: Steel Platebody
Items Made: 85
Experience Earned: 10313
Experience/Hour: 64550
Items/Hour: 532
====================================
Only actually made 55, script sometimes walks to the anvil waits a few seconds then walks back to banker.

Stopped script at this point to turn on debug to see if I could find out why.

========AshamanSmither v1.0=========
Time Running: 27 Minutes and 1 Seconds
Making: Steel Platebody
Items Made: 190
Experience Earned: 33937
Experience/Hour: 75361
Items/Hour: 422
====================================
Made all 190, not sure if the original error was colour based as the script auto reloads SMART.
Will retry when I have some more bars!


My only suggestion is slowing down the mouse movement from deposit all to withdrawing the bars, maybe I'm over thinking it!

But again - Great Script! ~1200 bars in 40 mins!

Ah ok yeah it might be that I don't have all of the colors for the anvil yet. I have a threshold for the anvil to prevent misfires, but if I'm missing some colors it may mess it up (like if a lot of people are blocking anvils). I'll gather some more though just in case.

The counting of the items made is kind of a jerry rig right now, strange that it did it incorrect and then fixed itself the second time haha.

It does burn through bars really fast!

What part about depositing fast and withdrawing fast has you concerned? Being like a human or messing up?

Thanks for trying it out! Glad it at least mostly worked for you!

The deposit/withdrawing was concerning being more human like, it's not too bad just me being over the top probably.

I'm assuming it was a colour issue, since it wasn't seen the second time with debug on, not a massive problem though! Excellent script!

Spelt Varrock wrong! :P

Nice script though :)

From: Ollybest
Spelt Varrock wrong! :P

Nice script though :)

haha ah man epic fail thanks for the catch!

Name Changed ;)

From: BraK
Name Changed ;)

muchas gracias!

========AshamanSmither v1.0=========
Time Running: 25 Minutes and 14 Seconds
Making: Adamant Platebody
Items Made: 200
Experience Earned: 124675
Experience/Hour: 296434
Items/Hour: 476


You are a genius, perfect.. just for the withdrawing sc hammers.

your script is flawless im usein steel knifes im run it all night for 5 hour = 125k not bad ahha

Thank you so much for this script! <3

umm 1 more thing it doesnt have much of an antiban can u change the hover to bank to hover when inventory is done?that way you can add a little antiban?


========AshamanSmither v1.0=========
Time Running: 44 Minutes and 37 Seconds
Making: iron Throwing
Items Made: 840
Experience Earned: 21000
Experience/Hour: 28240
Items/Hour: 1130
====================================

From: James Cash
========AshamanSmither v1.0=========
Time Running: 25 Minutes and 14 Seconds
Making: Adamant Platebody
Items Made: 200
Experience Earned: 124675
Experience/Hour: 296434
Items/Hour: 476


You are a genius, perfect.. just for the withdrawing sc hammers.

Very nice! I will probably add automatic handling for the sc hammers in the next update

From: print123
your script is flawless im usein steel knifes im run it all night for 5 hour = 125k not bad ahha

Thanks bro!

From: Divus
Thank you so much for this script! <3

You are welcome!

From: print123
umm 1 more thing it doesnt have much of an antiban can u change the hover to bank to hover when inventory is done?that way you can add a little antiban?


========AshamanSmither v1.0=========
Time Running: 44 Minutes and 37 Seconds
Making: iron Throwing
Items Made: 840
Experience Earned: 21000
Experience/Hour: 28240
Items/Hour: 1130
====================================

I never have a dedicated "antiban" to my scripts, the scripts themselves are fully randomized. But I will add some random movements while it is waiting on the items to be made, especially when it takes a long time to make with the 1 bar items.

Edit: If anyone could post a pic of the sc hammer in your inventory I can better script for it (don't feel like doing the minigame for one hehe)

:( wont be getting 99 smith got hacked last night lol.

just quickly, you dont have a bank pin option. gonna run it after system update, and let you know

perhaps summoning support also? you just click take bob and it continues on, no need to start smithing again? i will post proggy after soccer.


========AshamanSmither v1.0=========
Time Running: 1 Hours, 24 Minutes and 5 Seconds
Making: Adamant Platebody
Items Made: 770
Experience Earned: 239687
Experience/Hour: 171006
Items/Hour: 549
====================================
Successfully executed.

i have varrock armour 3 also, makes it occasionally smith faster. absolutely no problems. stopped to get more bars, thankyou!

The script will make 3 platebodies and bank instead of making 5. Any idea why?

I do have scroll of efficiency if that matters.

From: James Cash
:( wont be getting 99 smith got hacked last night lol.

Sorry to hear that bro!

From: stuartroad
just quickly, you dont have a bank pin option. gonna run it after system update, and let you know

perhaps summoning support also? you just click take bob and it continues on, no need to start smithing again? i will post proggy after soccer.


========AshamanSmither v1.0=========
Time Running: 1 Hours, 24 Minutes and 5 Seconds
Making: Adamant Platebody
Items Made: 770
Experience Earned: 239687
Experience/Hour: 171006
Items/Hour: 549
====================================
Successfully executed.

i have varrock armour 3 also, makes it occasionally smith faster. absolutely no problems. stopped to get more bars, thankyou!

Ah there is pin support I just forgot to give you a place to type it in, good catch! It shouldn't be too hard to implement summoning support - I can just port it from my altar script. Nice proggy!

From: hfbrads2
The script will make 3 platebodies and bank instead of making 5. Any idea why?

I do have scroll of efficiency if that matters.

Hmm what does the scroll of efficiency do? And do you have your top xp bar set to total or smithing (and it can't say 'lots')? It uses that to track if you are still smithing. Also what kind of bars are you using?

Ahah!

Yes my xp counter was maxed. I've closed it now and it works fine.

Scroll of efficiency has a chance to save a bar when smithing 3+ bar items but I can see now it did not affect anything.

From: hfbrads2
Ahah!

Yes my xp counter was maxed. I've closed it now and it works fine.

Scroll of efficiency has a chance to save a bar when smithing 3+ bar items but I can see now it did not affect anything.

Ah the scroll shouldn't mess anything up except maybe in a rare case cause it to wait an extra 5 or 6 seconds, I'll go buy that scroll and do some more testing with it

Hey there, any eta on when you will implement summoning? Would speed up the process for me just a little bit :)

Thanks again, will post proggy soon. xxo

From: stuartroad
Hey there, any eta on when you will implement summoning? Would speed up the process for me just a little bit :)

Thanks again, will post proggy soon. xxo

I've got it in there now, just gotta make sure the logic is all good. Also it will only work for those making things that decrease your inventory (like things that take up more than 1 bar or the 1 bar stuff that makes stuff that stacks (arrow tips))

Alright got the summoning pretty much working, but I want to add the auto sc hammer support with this version as well. So if someone could get me a pic of sc hammers with graphics in simba style (safe mode, brightness all the way up), I can add that no problem

-v1.1 Updated some colors, implemented beta sc hammer detection (auto withdraw new ones), added BOB familiar support, some random mouse movements from time to time

Haven't tested schammers seeing as I don't have any, but if you are using them just start with them visible in bank. Also summoning support may have a bug or two in it, not sure if it 100% ported over from my altar script, so let me know if any bugs from that!

wasnt expecting a 6 hour proggy when i woke up this morning, but well done, got me over 1mill xp overnight i think. this is old version, will start up newest version now while i do some house work. Thankyou for summoning

========AshamanSmither v1.0=========
Time Running: 6 Hours, 2 Minutes and 0 Seconds
Making: Adamant Platebody
Items Made: 3240
Experience Earned: -147668060
Experience/Hour: 1000
Items/Hour: 537
====================================
FailedOpening Banker too many times
Successfully executed.

From: stuartroad
wasnt expecting a 6 hour proggy when i woke up this morning, but well done, got me over 1mill xp overnight i think. this is old version, will start up newest version now while i do some house work. Thankyou for summoning

========AshamanSmither v1.0=========
Time Running: 6 Hours, 2 Minutes and 0 Seconds
Making: Adamant Platebody
Items Made: 3240
Experience Earned: -147668060
Experience/Hour: 1000
Items/Hour: 537
====================================
FailedOpening Banker too many times
Successfully executed.

Not bad for an initial release wow! If the items made calc is correct, you made over a mill xp last night? Does that sound about right?

lol i did say that in my post :P summoning is working flawlessly at the moment for tort, i think the banking needs to be sped up a bit if you could? not using sc hammers so i dunno how thats going. i dont know if it is any faster with tort, current proggy, not stopped yet

========AshamanSmither v1.1=========
Time Running: 32 Minutes and 44 Seconds
Making: Adamant Platebody
Items Made: 263
Experience Earned: 81875
Experience/Hour: 150033
Items/Hour: 482
====================================

i cant wait to try this updated version of your script i will post a proggy=)

From: stuartroad
lol i did say that in my post :P summoning is working flawlessly at the moment for tort, i think the banking needs to be sped up a bit if you could? not using sc hammers so i dunno how thats going. i dont know if it is any faster with tort, current proggy, not stopped yet

========AshamanSmither v1.1=========
Time Running: 32 Minutes and 44 Seconds
Making: Adamant Platebody
Items Made: 263
Experience Earned: 81875
Experience/Hour: 150033
Items/Hour: 482
====================================

Sped up how so? I think I added a few checks to make sure it actually withdrew what it was supposed to, but not sure if I messed up anything else. It also seems like summoning version might not be much faster

From: print123
i cant wait to try this updated version of your script i will post a proggy=)

Let me know how it goes!

–tested your script it worked flawless with terror bird
========AshamanSmither v1.1=========
Time Running: 1 Hours, 51 Minutes and 10 Seconds
Making: iron Throwing
Items Made: 1963
Experience Earned: 43075
Experience/Hour: 23247
Items/Hour: 1059
====================================
just a little feedback/tip:you should make it so it doesnt hover to bank untill all bars are done if your doing 1 bar smithing im sure it okay when smithing platebodys but for throwing or 1 item smithing it looks werid but im glad that you put a little more anti ban and randome movements but i still dont like when it hovers to bank spot overall its an awsome script doe
:edit: i did see that it does hover into skills sometimes that i liked and yeah i did like that=)

From: print123
–tested your script it worked flawless with terror bird
========AshamanSmither v1.1=========
Time Running: 1 Hours, 51 Minutes and 10 Seconds
Making: iron Throwing
Items Made: 1963
Experience Earned: 43075
Experience/Hour: 23247
Items/Hour: 1059
====================================
just a little feedback/tip:you should make it so it doesnt hover to bank untill all bars are done if your doing 1 bar smithing im sure it okay when smithing platebodys but for throwing or 1 item smithing it looks werid but im glad that you put a little more anti ban and randome movements but i still dont like when it hovers to bank spot overall its an awsome script doe

Sweet good to hear, and did you watch it on several runs? There is like a 50% chance or so that it will do something different besides hover over the map (like hover over smithing skill or what not)

Thank you for your glorious skills of scripting. I am slowly learning but I must thank you.

You have gotten me 99 hunter, and now to be 99 smithing.

<3 much love.

From: Usmarine
Thank you for your glorious skills of scripting. I am slowly learning but I must thank you.

You have gotten me 99 hunter, and now to be 99 smithing.

<3 much love.

You are most welcome! Let me know how it works for ya!

From: Ashaman88
You are most welcome! Let me know how it works for ya!

Just a little input from me:

This script made me laugh today, was watching it for a little. Random mod decided to say "Hi." the script logged out so fast.. it was hilarious. Guess I find the smallest things to be funny.

Anyways, after that happened, the script waited a little and logged me into the same world. When it logged into the world it went a little crazy, could not recognize the fact that it was making platebodies.(im making bodies now) It also started to run to random spots.. which made the mod curious. She said something to me, and the script logged out.
Kind of put me on edge to see all it took was a mod to say 'Hi' to completely ruin my good 5-hour run, and also.. made me look crazy and made the mod more attracted to me once I logged back in.

^^lol bad luck brian

From: Usmarine
Just a little input from me:

This script made me laugh today, was watching it for a little. Random mod decided to say "Hi." the script logged out so fast.. it was hilarious. Guess I find the smallest things to be funny.

Anyways, after that happened, the script waited a little and logged me into the same world. When it logged into the world it went a little crazy, could not recognize the fact that it was making platebodies.(im making bodies now) It also started to run to random spots.. which made the mod curious. She said something to me, and the script logged out.
Kind of put me on edge to see all it took was a mod to say 'Hi' to completely ruin my good 5-hour run, and also.. made me look crazy and made the mod more attracted to me once I logged back in.

That's auto done by simba, Ashaman might want to make an option to disable that in the script since alot of mods will chill around Varrock bank speaking.

From: Ollybest
That's auto done by simba, Ashaman might want to make an option to disable that in the script since alot of mods will chill around Varrock bank speaking.

haha yeah I guess since I usually bot on the quickchat world I hardly ever see a mod say anything so I didn't even think about this! Same thing had to be implemented in the LRC miner script.

Marine sorry to hear that happened. Where were you standing when it logged you back in? It's an easy option to turn off the mod detection…it's something like use UseFindMod:=False; in the setup. I'll go ahead and add that for the next version

^^^interesting how will you implement that to the script to log out when it finds a mod??

From: print123
^^^interesting how will you implement that to the script to log out when it finds a mod??

It already logs out when it finds a mod. It is built into the included. I just would put in an option to turn it off. All it does is detects when a mod speaks and logs out for a few minutes as a precaution

Interesting, I did not know it was built into it already. I am still extremely new to scripting.. so I dont know much, but I am learning fast so im not much of a leech. Any tips are appreciated. :)

I thought it was cool that it did it, but the script did not recover from it.

v1.2 Fixed a bug, added option to not logout when finds a mod.

From: Ashaman88
v1.2 Fixed a bug, added option to not logout when finds a find.

You mean finds a mod? :p

From: BMWxi
You mean finds a mod? :p

shh you see nothing! idk what it is about this thread but I can't make no dem senses!

Ashaman, I am enjoying this script so much, 86-95 smithing so far.

Little other things I have noticed:

The script always banks on the first righthand banker.. Well when you are using summoning it will get stuck outside of the doors, causing the character to run back to it, therefore my character is now outside the bank. It has, every so often, not been able to find the banker and has caused me to log-out.
Maybe we could bank on the first lefthand banker.. the summoned pet seems to not get stuck as much.

Its not much, but hey, I work 12hour days everyday. Sucks coming home and seeing your character worked 28minutes out of the 12hours because of the stupid tort. :)

—
Hope im not complaining to much. If I knew as much as you about scripting I would try and fix it myself. ;)

Still an amazing script.
Thank you again, Sir.

From: Usmarine
Ashaman, I am enjoying this script so much, 86-95 smithing so far.

Little other things I have noticed:

The script always banks on the first righthand banker.. Well when you are using summoning it will get stuck outside of the doors, causing the character to run back to it, therefore my character is now outside the bank. It has, every so often, not been able to find the banker and has caused me to log-out.
Maybe we could bank on the first lefthand banker.. the summoned pet seems to not get stuck as much.

Its not much, but hey, I work 12hour days everyday. Sucks coming home and seeing your character worked 28minutes out of the 12hours because of the stupid tort. :)

—
Hope im not complaining to much. If I knew as much as you about scripting I would try and fix it myself. ;)

Still an amazing script.
Thank you again, Sir.

I could always just have it call the familiar to you before trying to deposit bars into it? Would that work?

From: Ashaman88
I could always just have it call the familiar to you before trying to deposit bars into it? Would that work?

Hey, that works to! Probably alot easier to do as well?

–
This script has never recovered from the 6hour timer like your salamander does.**Just remembered that**
Might be user error though, noobs will be noobs. ;)
–

From: Usmarine
Hey, that works to! Probably alot easier to do as well?

–
This script has never recovered from the 6hour timer like your salamander does.**Just remembered that**
Might be user error though, noobs will be noobs. ;)
–

lol yeah much easier! I don't think the 6hr thing is your fault. Does it say something about failing to open banker for you?

From: Ashaman88
lol yeah much easier! I don't think the 6hr thing is your fault. Does it say something about failing to open banker for you?

Yes, something along that line. Im not exactly sure.. I will post it once I get it again.

I also log on sometimes in the middle of the bank.. usually sitting in the 3rd righthand side banker stall. Start the script up and it tries to bank at the first banker and fails, then logs out. Im not sure how it gets there, have not caught it in the act, only logged in it a few times.

From: Usmarine
Yes, something along that line. Im not exactly sure.. I will post it once I get it again.

I also log on sometimes in the middle of the bank.. usually sitting in the 3rd righthand side banker stall. Start the script up and it tries to bank at the first banker and fails, then logs out. Im not sure how it gets there, have not caught it in the act, only logged in it a few times.

It fails because it is stuck in the stall?

From: Ashaman88
It fails because it is stuck in the stall?

Yes. The character wont leave the stall to go to the other banker, just sits there and eventually the script kills itself.

From: Usmarine
Yes. The character wont leave the stall to go to the other banker, just sits there and eventually the script kills itself.

Ah yeah gay, I had it sort the bankers from right to left that is why. I was having a hard time always getting it to click on the closest banker (kept going for the second stall even though we were in the first stall!). I'll play around with it some more to see if I can perfect it so that it will always go to the closest banker

-v1.3 Now calls familiar before trying to deposit stuff into them, hopefully fixed bug with trying to get to banker in different stall

As always, post them bugs! Still can't see why it wouldn't restart after 6hrs…hmm I'll keep looking

From: Ashaman88
-v1.3 Now calls familiar before trying to deposit stuff into them, hopefully fixed bug with trying to get to banker in different stall

As always, post them bugs! Still can't see why it wouldn't restart after 6hrs…hmm I'll keep looking

Ahh nice, thanks for all the quick fixes!!
Script is running like a champ. Ran for a complete 6hours today while I was at work, didnt recover but hey.. 2nd time getting it to run for that long.:norris:

Hey!

Tested out the version yesterday, and it works. I read through the thread again, and yes, if I only have 3 SC Hammers, it will work perfectly. However, just wondering how does having more than 3 hammers cause failure to detect the hammers

From: newb cheater
Hey!

Tested out the version yesterday, and it works. I read through the thread again, and yes, if I only have 3 SC Hammers, it will work perfectly. However, just wondering how does having more than 3 hammers cause failure to detect the hammers

Good to hear, pretty much it's because with sc hammers it won't deposit everything and ignores the first three slots. I will probably just get an sc hammer for myself to thoroughly test it. How long does it usually take to get one?

From: Ashaman88
Good to hear, pretty much it's because with sc hammers it won't deposit everything and ignores the first three slots. I will probably just get an sc hammer for myself to thoroughly test it. How long does it usually take to get one?

Last time I did Stealing Creation was a good 2 years ago but it is simple to get the max amount of points in the game. Im sure it wouldnt take more than 2 hours to get about 3 or so SC hammers for testing. The game is kind of fun to!

From: Usmarine
Last time I did Stealing Creation was a good 2 years ago but it is simple to get the max amount of points in the game. Im sure it wouldnt take more than 2 hours to get about 3 or so SC hammers for testing. The game is kind of fun to!

sweet, will do!

-v1.4 Fixed SC hammer support, just have them visible in bank when you start. Added a few more colors, hopefully fixed the restarting at 6 hour thing

From: Ashaman88
-v1.4 Fixed SC hammer support, just have them visible in bank when you start. Added a few more colors, hopefully fixed the restarting at 6 hour thing

Woot, thanks!

Nice script, will use in the future. :)

From: NKN
Nice script, will use in the future. :)

Let me know how it goes!


PS just reuploaded 1.4.. I made a silly mistake so if you downloaded it redownload please!

Just got the 6hour log out, script closed it out, re-opened and continued to push on. Thanks for the fix ;)

E: For some reason when it re-opened the client.. it decided to stop working on it and started opening mass amounts of runescape tabs on my browser. Only way I could get it to work was to stop it, completely log onto the client, and start it up.

I dont think its your script, might be smart acting up, but just giving you a heads up.

**Also it is entering the pin in wrong everytime.

From: Usmarine
Just got the 6hour log out, script closed it out, re-opened and continued to push on. Thanks for the fix ;)

E: For some reason when it re-opened the client.. it decided to stop working on it and started opening mass amounts of runescape tabs on my browser. Only way I could get it to work was to stop it, completely log onto the client, and start it up.

I dont think its your script, might be smart acting up, but just giving you a heads up.

**Also it is entering the pin in wrong everytime.

Yeah I've heard of the login thing being funky from time to time. As for the pin that doesn't make much sense…silly question but you're sure you typed it into script correctly?

From: Ashaman88
Yeah I've heard of the login thing being funky from time to time. As for the pin that doesn't make much sense…silly question but you're sure you typed it into script correctly?

Yeah ;) Its correct in the script, its the 4th time it has gotten the pin incorrect. Maybe a new update from Jagex we dont know about.. Not to sure.

From: Usmarine
Yeah ;) Its correct in the script, its the 4th time it has gotten the pin incorrect. Maybe a new update from Jagex we dont know about.. Not to sure.

Thats not good! I'll go check it out tomorrow's

From: Ashaman88
Thats not good! I'll go check it out tomorrow's

Actually, it might be because I am laggy a little more than usual right now. I will check it again once I get home and edit.

E: Seems to be working fine now, I think it was the lag that was causing it to hit the wrong number. ;)

This script is working well. The only issue I have run into is clan avatars. There was someone else smithing in the same area with their clan avatar out and it seemed to choke up the script for whatever reason… it could not click on the anvil.

A simply world hop fixed this issue. Clan avatars are annoyingly large, anyways.

Hi, I would like to thank you for this script, i achieved 99 smithing sometime last night, I didnt realize i was so close, or perhaps the script went for atleast 6 hours, i don't have proggys cause i just run it over night, and my wife closes everything when she gets on in the morning.


Much thanks, very well done with all your scripts, they are all quality!

From: Scorched
This script is working well. The only issue I have run into is clan avatars. There was someone else smithing in the same area with their clan avatar out and it seemed to choke up the script for whatever reason… it could not click on the anvil.

A simply world hop fixed this issue. Clan avatars are annoyingly large, anyways.

Silly avatar, were other anvils visible though? Thanks for the feedback!

From: stuartroad
Hi, I would like to thank you for this script, i achieved 99 smithing sometime last night, I didnt realize i was so close, or perhaps the script went for atleast 6 hours, i don't have proggys cause i just run it over night, and my wife closes everything when she gets on in the morning.


Much thanks, very well done with all your scripts, they are all quality!

Very nice! Glad you liked it.

Ahh!! Thank you so much mate. Such a great script. :)

From: Usmarine



Ahh!! Thank you so much mate. Such a great script. :)

Congrats bro! I'll add you to the OP

From: Ashaman88
Silly avatar, were other anvils visible though? Thanks for the feedback!

The avatar was just to the north of the anvil building. It was outside because it cannot fit inside. I hope that makes sense. It was not physically blocking view of the anvils, however. Which is why I thought it was odd.

From: Scorched
The avatar was just to the north of the anvil building. It was outside because it cannot fit inside. I hope that makes sense. It was not physically blocking view of the anvils, however. Which is why I thought it was odd.

That is pretty strange. Did the mouse hover over the avatar at all?

No, the mouse stayed still (I dont remember where it was) until the timer was up. Then it went to bank the materials, walk most of the way to the anvil and stay put until it was time bank again. If I can find someone with an avatar I'm sure I could repeat the results.

From: Scorched
No, the mouse stayed still (I dont remember where it was) until the timer was up. Then it went to bank the materials, walk most of the way to the anvil and stay put until it was time bank again. If I can find someone with an avatar I'm sure I could repeat the results.

I used this around manny Avatars.. Didnt really have it mess up but once. The avatar was almost the same color has the anvil.

-v1.5 Fixed a silly bug with my login function

Very nice :D only had 1k bronze and it melted right though the stack!
========AshamanSmither v1.5=========
Time Running: 31 Minutes and 9 Seconds
Making: Bronze Platebody
Items Made: 245
Experience Earned: 15313
Experience/Hour: 29481
Items/Hour: 472
====================================

From: BMWxi
Very nice :D only had 1k bronze and it melted right though the stack!
========AshamanSmither v1.5=========
Time Running: 31 Minutes and 9 Seconds
Making: Bronze Platebody
Items Made: 245
Experience Earned: 15313
Experience/Hour: 29481
Items/Hour: 472
====================================

Good to hear! It's crazy how fast those bars are used up! Bye bye monies

yeah, i'm too poor to buy bars so I mined the tin and copper :D

-v1.6 Antiban overhaul, various bug fixes, added break system, other tweaks

========AshamanSmither v1.6=========
Time Running: 5 Hours, 57 Minutes and 51 Seconds
Making: Bronze Throwing
Items Made: 5992
Experience Earned: 27756090
Experience/Hour: 4653702
Items/Hour: 1005
=========================================

has a banking error where it tries to click on the 3rd-4th banker (away from the door) and quits cause bank wont open. Other than that great script! and yes EXP is wayyy off i didn't reset mine. :P

From: Sneeky Z
========AshamanSmither v1.6=========
Time Running: 5 Hours, 57 Minutes and 51 Seconds
Making: Bronze Throwing
Items Made: 5992
Experience Earned: 27756090
Experience/Hour: 4653702
Items/Hour: 1005
=========================================

has a banking error where it tries to click on the 3rd-4th banker (away from the door) and quits cause bank wont open. Other than that great script! and yes EXP is wayyy off i didn't reset mine. :P

Nice proggy! How often did that error happen?

it will happen anywhere from 10 mins - 6 hours.
it had actually shutoff cause of the bank error shortly be4 getting the prog.

From: Sneeky Z
it will happen anywhere from 10 mins - 6 hours.
it had actually shutoff cause of the bank error shortly be4 getting the prog.

I getcha. I think I can whip up another failsafe if that happens.

Time Running: 59 Minutes and 36 Seconds
Making: steel platebody
Items Made: 430
Experience Earned: 77813
Experience/Hour: 78328
Items/Hour: 433
awesome script man i was only expecting 60k/h
=========================================

========AshamanSmither v1.6=========
Time Running: 2 Hours, 4 Seconds
Making: steel platebody
Items Made: 880
Experience Earned: 162188
Experience/Hour: 81048
Items/Hour: 440
=========================================
Time until break: 08:11:07

From: daarth
Time Running: 59 Minutes and 36 Seconds
Making: steel platebody
Items Made: 430
Experience Earned: 77813
Experience/Hour: 78328
Items/Hour: 433
awesome script man i was only expecting 60k/h
=========================================

========AshamanSmither v1.6=========
Time Running: 2 Hours, 4 Seconds
Making: steel platebody
Items Made: 880
Experience Earned: 162188
Experience/Hour: 81048
Items/Hour: 440
=========================================
Time until break: 08:11:07

very nice! Glad it worked well for you

Hi Ashaman,

I've been using the script lately,

Found about 2 bugs.

Upon start it trys to take a break. logs out then back in and starts script as normal

If it has a 6 hour relog it doesnt scroll back down to platebodys.. ended up with invents full of mith grappels :|


but still a GREAT script aside from those two! :) You'll be getting me 99 :)

From: xBruceyy
Hi Ashaman,

I've been using the script lately,

Found about 2 bugs.

Upon start it trys to take a break. logs out then back in and starts script as normal

If it has a 6 hour relog it doesnt scroll back down to platebodys.. ended up with invents full of mith grappels :|


but still a GREAT script aside from those two! :) You'll be getting me 99 :)

Ah i getcha, thanks for the feedback, it helps a lot! Will fix those things up hopefully this weekend.

-v1.7 Fixed breaking bug, interface moves down when you relog as well

Wow thanks so much for this Ashaman. :D You're amazing!

========AshamanSmither v1.7=========
Time Running: 53 Minutes and 28 Seconds
Making: Mithril 2-Handed Sword
Items Made: 585
Experience Earned: 86400
Experience/Hour: 96937
Items/Hour: 656
=========================================

From: guthixboss1
Wow thanks so much for this Ashaman. :D You're amazing!

========AshamanSmither v1.7=========
Time Running: 53 Minutes and 28 Seconds
Making: Mithril 2-Handed Sword
Items Made: 585
Experience Earned: 86400
Experience/Hour: 96937
Items/Hour: 656
=========================================

Glad it's still working well!

Exception in Script: Plugin(libsmartremote32) has not been found

how do I fix this?

From: lucasboom
Exception in Script: Plugin(libsmartremote32) has not been found

how do I fix this?

Google is your friend on this one! And the faq

Logs out when missclicked the banker to much -_-…

From: lucasboom
Logs out when missclicked the banker to much -_-…

How often does that happen? And how many times does it missclick the banker? Mind posting a pic of it happening? And what do you mean by misclick- just that it clicks right next to the banker?

Ashman you run villavu now, its official

From: FloppyWien3r
Ashman you run villavu now, its official

With an iron fist!!

From: Ashaman88
How often does that happen? And how many times does it missclick the banker? Mind posting a pic of it happening? And what do you mean by misclick- just that it clicks right next to the banker?

Well the script wont log back in, and it happends after 5-10mins of running. I don't excatly know what happens cuz I just let it run everytime and I'm not watching, but now the problem is when I download the script here, it will open but after 2 sec it close?

From: lucasboom
Well the script wont log back in, and it happends after 5-10mins of running. I don't excatly know what happens cuz I just let it run everytime and I'm not watching, but now the problem is when I download the script here, it will open but after 2 sec it close?

Update your srl and it should be fixed. Lemme know when you see the banking bug!

From: Ashaman88
Update your srl and it should be fixed. Lemme know when you see the banking bug!

It says my current version is 980 and I need version 991?

Edit:

NVM fixed it, gonna try out soon.

From: lucasboom
It says my current version is 980 and I need version 991?

Edit:

NVM fixed it, gonna try out soon.

Sweet let me know how it goes!

From: Ashaman88
Sweet let me know how it goes!

It goes pretty good but when it takes a break its for 99;…:… O.o

This is a great script! I'll post a proggy after 10k iron bars on platebodies :)

Had to cancel it since I found a quick way to make 5m/hour. Want to do it before it crashes.

========AshamanSmither v1.7=========
Time Running: 19 Minutes and 11 Seconds
Making: Iron Platebody
Items Made: 100
Experience Earned: 25000
Experience/Hour: 78155
Items/Hour: 313
=========================================

From: Parfilo
Had to cancel it since I found a quick way to make 5m/hour. Want to do it before it crashes.

========AshamanSmither v1.7=========
Time Running: 19 Minutes and 11 Seconds
Making: Iron Platebody
Items Made: 100
Experience Earned: 25000
Experience/Hour: 78155
Items/Hour: 313
=========================================

hehe i forgive you, glad it worked well!

Error: Exception: Access violation at line 269
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap]

im getting this when i run it

From: miller536
Error: Exception: Access violation at line 269
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap]

im getting this when i run it

Does it open up another tab? Update your simba and srl and if it's related to you trying to update to smart 8.0 make sure you've read the instructions on how to do so

what's the best thing to smith to make your money stretch for the xp?
I heard addy bolts but when I calculated the plates, i saved like 200 gp.

https://docs.google.com/spreadsheet/ccc?key=0AldEhLOK6ejJdDY1Q1F6eHNWT3JYLThHZC1hVVU0SEE#gid=0

First I want to thank you for making this script. Its awesome and helps me out so much. I do have a question though. im smithing plates and almost every time after I finish using all the bars in my inventory it waits almost 10 seconds to click back to the bank. My concern is over time that 10 seconds will add up to a lot of lost xp. Is the time buffer there to randomize how long you wait every time? Is there anyway for me to make it shorter? once again thanks!

From: nkd2009
First I want to thank you for making this script. Its awesome and helps me out so much. I do have a question though. im smithing plates and almost every time after I finish using all the bars in my inventory it waits almost 10 seconds to click back to the bank. My concern is over time that 10 seconds will add up to a lot of lost xp. Is the time buffer there to randomize how long you wait every time? Is there anyway for me to make it shorter? once again thanks!

Hmm are you using sc hammers or have one of the bAr saving abilities on ?

From: Ashaman88
Hmm are you using sc hammers or have one of the bAr saving abilities on ?

no nothing man, just regular hammer and wearing no equipment. Ive actually noticed that other people smithing next to me can bank and start smithing again before the character has even gone to the bank. Is there any way i can shorten that wait time? It seems like its coded to look like im not paying attention and so i always wait a random amount of time before banking.

From: nkd2009
no nothing man, just regular hammer and wearing no equipment. Ive actually noticed that other people smithing next to me can bank and start smithing again before the character has even gone to the bank. Is there any way i can shorten that wait time? It seems like its coded to look like im not paying attention and so i always wait a random amount of time before banking.

Well it shouldn't be that long. What bars and item are you making?

From: Ashaman88
Well it shouldn't be that long. What bars and item are you making?

Im using addy bars and making platebodies. If its not an easy fix dont worry about it. The other thing ive noticed is that every time it selects the "make all" option it lags sometimes close to 4 seconds and then because of the lag only does 3 o 4 platebodies. If i manually select make all it doesnt lag at all only when the program does it. Any ideas? thanks for all your help man

From: nkd2009
Im using addy bars and making platebodies. If its not an easy fix dont worry about it. The other thing ive noticed is that every time it selects the "make all" option it lags sometimes close to 4 seconds and then because of the lag only does 3 o 4 platebodies. If i manually select make all it doesnt lag at all only when the program does it. Any ideas? thanks for all your help man

Yes I do know why. I'll be working on a few updates from previous suggestions this week

From: Ashaman88
Yes I do know why. I'll be working on a few updates from previous suggestions this week

I fixed the lag problem. I have a mac and was running windows xp on vmware. I switched to just running if off of winebottler and the lag is gone. Only problem is now it smiths a random number of plates ranging from just 2 to 5. Not sure why. Is there any way to make the time between selecting smith all and clicking back to the bank more consistent? thanks for you quick responses.

From: nkd2009
I fixed the lag problem. I have a mac and was running windows xp on vmware. I switched to just running if off of winebottler and the lag is gone. Only problem is now it smiths a random number of plates ranging from just 2 to 5. Not sure why. Is there any way to make the time between selecting smith all and clicking back to the bank more consistent? thanks for you quick responses.

hmm that doesn't make sense, did you mess with any of the stuff in the script?

From: Ashaman88
hmm that doesn't make sense, did you mess with any of the stuff in the script?

no not at all. Just filled in my info and hit play. I dont know how you coded it but it seems like the time between selecting smith all and clicking back to the bank is randomly generated. and most of the time its just to quick.

From: nkd2009
no not at all. Just filled in my info and hit play. I dont know how you coded it but it seems like the time between selecting smith all and clicking back to the bank is randomly generated. and most of the time its just to quick.

What is your xp bar set to? It should just wait till you finish smithing all you can

Ashaman I love ALL your scripts that are on the public forums except those that I don't use … Like ApeAtoll agility. :) This script helped my get from 56 Smithing to 70 Smithing at a loss of just 6M :)

-v1.8 Tweaks to antiban, changes to scroll interface, improved depositing, extrabar detection

And congrats swifte!

Hey, just tested 1.8, but currently still think 1.7 is more stable. I reduced the waits to suite the item I'm making so its good. Only thing I could not fix was the banking bug which I mentioned in the PM. Other than that, all good :)

From: newb cheater
Hey, just tested 1.8, but currently still think 1.7 is more stable. I reduced the waits to suite the item I'm making so its good. Only thing I could not fix was the banking bug which I mentioned in the PM. Other than that, all good :)

What is unstable in 1.8?

From: Ashaman88
What is unstable in 1.8?

The waits between the smithing as well as the banking, sometimes it cant detect bars although bank screen is open. Just freezes there. And also the fact that it turns all chats and assist off. An option to not do that if you are not using scroll of efficiency or that dung reward thing would be great.

Banking bug still exists as well. And the time. Those two are the two main items

From: newb cheater
The waits between the smithing as well as the banking, sometimes it cant detect bars although bank screen is open. Just freezes there. And also the fact that it turns all chats and assist off. An option to not do that if you are not using scroll of efficiency or that dung reward thing would be great.

Banking bug still exists as well. And the time. Those two are the two main items

Hmm the waiting thing doesn't make sense - if anything waits were decreased

- The detecting bars thing, nothing was changed with that
- I can put an option to not do the chats thing
-what banking bug?
- the timing was decreased to 3 seconds like you asked

its runs great except is it suppose to only make 3 platebodys at a time? like it'll be completely random in making anywhere from 3-5 iron platebodys a trip unless its suppose to do that

Does anyone know what is best to smith atm with the lowest xp/gp? Or a good place to go with a list of current xp/gp rates?

From: Woodcutters
its runs great except is it suppose to only make 3 platebodys at a time? like it'll be completely random in making anywhere from 3-5 iron platebodys a trip unless its suppose to do that

Do you have your xp bar set to smithing or total xp?

From: Austin
Does anyone know what is best to smith atm with the lowest xp/gp? Or a good place to go with a list of current xp/gp rates?

I think there is a link to the best stuff a few posts up. I'll probably add it to OP!

From: Ashaman88
I think there is a link to the best stuff a few posts up. I'll probably add it to OP!

Oh yes there is, thank you Popz. I'll make sure to bookmark that as it has a lot of other useful charts/tips ;)

EDIT: Hmm, it looks like Rune 2hs and platelegs, have a xp/gp rate of 0.20, and you can make up to 208k xp an hour :o. Don't know how updated this is, but that might be worth looking in to. Here's the link btw:

https://docs.google.com/spreadsheet/ccc?key=0AldEhLOK6ejJdDY1Q1F6eHNWT3JYLThHZC1hVVU0SEE#gid=0

EDIT2: Oh nvm, now they're -3.23gp/xp >.>, and I just noticed that this was made over a year ago lol

The spreadsheets automatically update according to the current ge prices, so it's accurate.

========AshamanSmither v1.8=========
Time Running: 4 Hours, 37 Minutes and 39 Seconds
Making: Adamant Platebody
Items Made: 2560
Experience Earned: 812366
Experience/Hour: 175548
Items/Hour: 553
=========================================

From: Popz
The spreadsheets automatically update according to the current ge prices, so it's accurate.

========AshamanSmither v1.8=========
Time Running: 4 Hours, 37 Minutes and 39 Seconds
Making: Adamant Platebody
Items Made: 2560
Experience Earned: 812366
Experience/Hour: 175548
Items/Hour: 553
=========================================

Very nice!

I have version 1.9 ready for EOC update tomorrow, I'll give it a few test runs when it officially comes out and then release

I see you're keeping on top of things, nice job :). Too bad I'm too poor for your script :p

From: BMWxi
I see you're keeping on top of things, nice job :). Too bad I'm too poor for your script :p

Just trying to get ahead of the work hehe

-v1.9 Fixes for EOC update, added more objects to make


-Supports making Dagger, OffDagger, Helm, Hatchet, Mace, OffMace, Bolt,Sword, OffSword, Dart, Nail, Arrow, Scimitar, OffScimitar, Pickaxe Crossbow, Longsword, OffLongsword, Knife, OffKnife, Throwing, OffThrowing, Square Shield, Warhammer, OffWarHammer, Battleaxe, OffBattleaxe, Chainbody, Kiteshield, Claws, OffClaws, 2-Handed Sword, Platelegs, Plateskirt, Platebody

Awesome, Addy plates 50k/hr faster now ty Jagex and Ashman!

From: oldgregg
Awesome, Addy plates 50k/hr faster now ty Jagex and Ashman!

Wow no way really?

From: Ashaman88
Wow no way really?

yea, I use to get around 100-110 k/hr now I get 150k+/hr.

From: oldgregg
yea, I use to get around 100-110 k/hr now I get 150k+/hr.

How did the EoC improve it?

Wow, you update fast :P, quick proggy in eoc(im getting about a ~6k xp/hr increase):

========AshamanSmither v1.9=========
Time Running: 1 Hours, 20 Minutes and 16 Seconds
Making: Adamant Platebody
Items Made: 770
Experience Earned: 243012
Experience/Hour: 181633
Items/Hour: 576
=========================================


edit: longer proggy:
========AshamanSmither v1.9=========
Time Running: 3 Hours, 31 Minutes and 57 Seconds
Making: Adamant Platebody
Items Made: 2035
Experience Earned: 639721
Experience/Hour: 181088
Items/Hour: 576
=========================================

From: Popz
Wow, you update fast :P, quick proggy in eoc(im getting about a ~6k xp/hr increase):

========AshamanSmither v1.9=========
Time Running: 1 Hours, 20 Minutes and 16 Seconds
Making: Adamant Platebody
Items Made: 770
Experience Earned: 243012
Experience/Hour: 181633
Items/Hour: 576
=========================================

I played around with the beta to get the scripts ready :) very nice xp btw!

The bot deposits the platebodies then withdraws the bars but the script will stop there. This happens either when you start
the script or in this case it occured 10 minutes after

Time until break: 09:49:32
No inv full
Successfully executed.

From: Popz
The bot deposits the platebodies then withdraws the bars but the script will stop there. This happens either when you start
the script or in this case it occured 10 minutes after

Time until break: 09:49:32
No inv full
Successfully executed.

Are you lagging a ton? It will shut down if the inventory isn't full after like 5
Seconds or so

From: Austin
How did the EoC improve it?

Make X interface is faster for smithing it seems.

Hmm, its working fine again today. Wasnt Lagging when it happened last night either, strange

I'm also getting the No Inv Full thing :/
It happens after it's withdrawn bars (no lag at all). Not closing bank interface or walking to anvils so it gets stuck.

From: Castiel1
I'm also getting the No Inv Full thing :/
It happens after it's withdrawn bars (no lag at all). Not closing bank interface or walking to anvils so it gets stuck.

Happens at the first run? How long does it wait before it gives up ? I don't think I changed anything with the banking

From: Ashaman88
Happens at the first run? How long does it wait before it gives up ? I don't think I changed anything with the banking

For me it instantly gave up once the rune bars were in the inventory

When it happened to me last night, It was either on the 1st run or <10 minutes in. It would withdraw the addy bars and the inventory would fill but the pointer would just stay there, then you'd get the message and the script would terminate.


It will "withdraw all" and the bars will be in the inventory but the mouse will just stop after clicking(spot shown in the pic) and the script will stop.


-Only happened last night for me seems to be working now, just here to help

MarkTime(T);
      Repeat
        Wait(Random(100));
        If TimeFromMark(T)>9000 Then
        Begin
          If Not WaitLoggedIn(1000) Then
            Exit;
          Writeln('No inv full');
          TerminateScript;
        End;
      Until InvFull; 

hmm that's the part where it is terminating…and it's obviously not taking more than 9 seconds to withdraw the bars…I'm perplexed, but will do some testing over it soon

From: Ashaman88

MarkTime(T);
      Repeat
        Wait(Random(100));
        If TimeFromMark(T)>9000 Then
        Begin
          If Not WaitLoggedIn(1000) Then
            Exit;
          Writeln('No inv full');
          TerminateScript;
        End;
      Until InvFull; 

hmm that's the part where it is terminating…and it's obviously not taking more than 9 seconds to withdraw the bars…I'm perplexed, but will do some testing over it soon

Thanks :) I tried increasing the 9000 to 90000 lol. No change :P

From: Castiel1
Thanks :) I tried increasing the 9000 to 90000 lol. No change :P

Positive all of your srl is updated? And fixed mode, max brightness, zoom all the way to right, min settings?

From: Ashaman88
Positive all of your srl is updated? And fixed mode, max brightness, zoom all the way to right, min settings?

Just checked them all. RS Settings fine. SRL update downloaded (I wasn't aware there was one, as SMART launched fine :S)

Reloaded SMART and….
First bank withdraw worked fine…
…
And now it's running flawlessly.. Must have been the SRL update. Thanks :)

Edit: When it first starts up and no previous item is selected in the GUI, it tends to make mistakes there. I think the mouse needs to be a bit slower/more waiting time because otherwise the wrong thing is made.

From: Castiel1
Just checked them all. RS Settings fine. SRL update downloaded (I wasn't aware there was one, as SMART launched fine :S)

Reloaded SMART and….
First bank withdraw worked fine…
…
And now it's running flawlessly.. Must have been the SRL update. Thanks :)

Edit: When it first starts up and no previous item is selected in the GUI, it tends to make mistakes there. I think the mouse needs to be a bit slower/more waiting time because otherwise the wrong thing is made.

Hmm that is pretty strange! Let me know if it pops up again!

And for the edit: What exactly does it do wrong? Clicks on the wrong item?

From: Ashaman88
Hmm that is pretty strange! Let me know if it pops up again!

And for the edit: What exactly does it do wrong? Clicks on the wrong item?

It scrolls down and clicks on the wrong item (the mouse is so fast I can't even see it clicking the wrong one!) but then it starts to make them

From: Castiel1
It scrolls down and clicks on the wrong item (the mouse is so fast I can't even see it clicking the wrong one!) but then it starts to make them

You mean it scrolls up? Which item are you trying to make and which does it start to make?

From: Ashaman88
You mean it scrolls up? Which item are you trying to make and which does it start to make?

Couldn't say this last night because it was a great money making method :P (5m+/h)
It's been patched now though.

I was trying to make Rune Pickaxe, but it was making rune claws on one occasion, and rune chainbody on another.

From: Castiel1
Couldn't say this last night because it was a great money making method :P (5m+/h)
It's been patched now though.

I was trying to make Rune Pickaxe, but it was making rune claws on one occasion, and rune chainbody on another.

Aw yeah i had to completely redo the interface stuff so I may have messed up on a few - did it ever pick the correct icon for pickaxe?

PS love supernatural

Worked fine yesterday but now when I try I get a compiling error, My simba and srl are both updated too

[Error] C:\Simba\Includes\SRL/SRL/core/globals.simba(52:1): 'BEGIN' expected at line 51
Compiling failed.

From: Popz
Worked fine yesterday but now when I try I get a compiling error, My simba and srl are both updated too

[Error] C:\Simba\Includes\SRL/SRL/core/globals.simba(52:1): 'BEGIN' expected at line 51
Compiling failed.

Close the globals tab and try running again

edit: nvm got it working, apparently SRL wasnt updated, Thought I updated it >.>

Hope it's updated… :)

I'll check out bugs tonight

From: Popz
The bot deposits the platebodies then withdraws the bars but the script will stop there. This happens either when you start
the script or in this case it occured 10 minutes after

Time until break: 09:49:32
No inv full
Successfully executed.

Im getting the same thing, it seems to happen when banking, it freezes for a second after withdrawing a full inv of bars, and then it executes the script while still in the bank menu. Nice script tho i got 5 levels easy ^^ even with it executing haha

Edit: correction im just dumb and forgot to read previous post about updating srl… sorry haha.

From: Paradox122
Im getting the same thing, it seems to happen when banking, it freezes for a second after withdrawing a full inv of bars, and then it executes the script while still in the bank menu. Nice script tho i got 5 levels easy ^^ even with it executing haha

Edit: correction im just dumb and forgot to read previous post about updating srl… sorry haha.

So the srl update fixed it? How long was it frozen at the bank screen? Was it frozen with the bars not showing up in inventory or taking several seconds for it to show up?

I am also getting the no inv full message. It withdraws the bars then the pointer just stops on like 3 spaces down and then it quits the script. sometimes it will run for under ten minutes but usually gives this error almost immediately.

From: nkd2009
I am also getting the no inv full message. It withdraws the bars then the pointer just stops on like 3 spaces down and then it quits the script. sometimes it will run for under ten minutes but usually gives this error almost immediately.

Yeah I'll be messing with it this week to see what's up

I updated to simba 991 and updated srl still getting the error just so you know.

From: nkd2009
I updated to simba 991 and updated srl still getting the error just so you know.

Yeah I'll have time to check it out tomorrow :)

-v2.0 More waits, other EOC tweaks


Ran it fine for an hour, if you still have trouble with the inventory full, shoot me a pm so I can tv you!


Also -Make sure production dialog option is enabled!!! (right click the xp circle to toggle that option)

From: Ashaman88
-v2.0 More waits, other EOC tweaks


Ran it fine for an hour, if you still have trouble with the inventory full, shoot me a pm so I can tv you!


Also -Make sure production dialog option is enabled!!! (right click the xp circle to toggle that option)

Well i see you changed the message haha. It does the exact same thing except i get the message "looks like you have run out of supplies" instead of no iv full. i downloaded the latest version of the script also. Cant think of why it keeps doing this for me. anything else i can try? it used to work perfect. thanks for being to quick to respond by the way. and for making awesome scripts :redface:

From: nkd2009
Well i see you changed the message haha. It does the exact same thing except i get the message "looks like you have run out of supplies" instead of no iv full. i downloaded the latest version of the script also. Cant think of why it keeps doing this for me. anything else i can try? it used to work perfect. thanks for being to quick to respond by the way. and for making awesome scripts :redface:

What kind of bars are you using? Mind posting your graphics settings?

im using adamant. I turned debug to true and im not exactly sure what happened. It ran the script but terminated it due to trying to find the banker to many times. The weird part is now i cant even find the script on my cpu. Did i somehow send it off to you or something? it has my user and pass on it haha so im a little nervous. and do u mean grahpic settings for rs or simba?

NVM it somehow got moved. Im an idiot haha

From: nkd2009
im using adamant. I turned debug to true and im not exactly sure what happened. It ran the script but terminated it due to trying to find the banker to many times. The weird part is now i cant even find the script on my cpu. Did i somehow send it off to you or something? it has my user and pass on it haha so im a little nervous. and do u mean grahpic settings for rs or simba?

NVM it somehow got moved. Im an idiot haha

haha it's all good, just post a screenshot of your graphics settings for rs!

hope this is what you wanted. let me know

From: nkd2009


hope this is what you wanted. let me know

Yeah that is so strange, Imma have you change one line to help me with it. I'll let you know which in a bit

k sweet, thanks for being so helpful.

Ok try running this

http://paste.villavu.com/show/3653/

and tell me what it says when it shuts down!

Been using this for the past hour or so for the first time and I've had a couple problems.
First, I have it set to make mithril platebodys but I've caught it three times now starting to make plateskirts. I think it may have something to do with summoning since last time I cuaght it I noticed it changed from platebodys after it took my BoB.
Also after about 40 minutes it said I ran out of supplies (can't remember exactly what it said) and the script stopped with me in the bank right clicking my mithril bars in the top right corner.

I'm positive I have the right settings so I'm not sure why this is happening.
I'm using a pack yak and btw I'm not sure if you have anything on the OP about it but you have to make sure you have your "left-click option"set to Take BoB or it doesn't work with familiar.

Edit 2:
Just stopped after 15 mins..
========AshamanSmither v2.0=========
Time Running: 15 Minutes and 3 Seconds
Making: Mithril Platebody
Items Made: 113
Experience Earned: 29750
Experience/Hour: 118503
Items/Hour: 450
=========================================
Time until break: 09:45:29
It looks like you"re out of supplies, shutting down!
Successfully executed.

From: sk8_tolivv
Been using this for the past hour or so for the first time and I've had a couple problems.
First, I have it set to make mithril platebodys but I've caught it three times now starting to make plateskirts. I think it may have something to do with summoning since last time I cuaght it I noticed it changed from platebodys after it took my BoB.
Also after about 40 minutes it said I ran out of supplies (can't remember exactly what it said) and the script stopped with me in the bank right clicking my mithril bars in the top right corner.

I'm positive I have the right settings so I'm not sure why this is happening.
I'm using a pack yak and btw I'm not sure if you have anything on the OP about it but you have to make sure you have your "left-click option"set to Take BoB or it doesn't work with familiar.

Edit 2:
Just stopped after 15 mins..
========AshamanSmither v2.0=========
Time Running: 15 Minutes and 3 Seconds
Making: Mithril Platebody
Items Made: 113
Experience Earned: 29750
Experience/Hour: 118503
Items/Hour: 450
=========================================
Time until break: 09:45:29
It looks like you"re out of supplies, shutting down!
Successfully executed.

Yeah check out the previous pastebin post - let me know what it prints when you get the low supplies thing again. Also are you saying it is re selecting an option after you summon a new familiar? It should only have to re select the option when you have logged out…Does it select it correctly the first time?

Ill check it out when I get back, gotta go soon.

I already had a yak summoned and it starts making the platebodies for 10 mins+ as it's supposed to then randomly I'll check back in a bit and I'll catch it making plateskirts.

I haven't actually seen what happens when it selects the option but from the chat box dialog I could tell it was after I ran out of bars in my inventory and it took them from my familiar.

When I try out the one you posted later for the item bug I'll try my best to see exactly what happens.

Thanks

From: sk8_tolivv
Ill check it out when I get back, gotta go soon.

I already had a yak summoned and it starts making the platebodies for 10 mins+ as it's supposed to then randomly I'll check back in a bit and I'll catch it making plateskirts.

I haven't actually seen what happens when it selects the option but from the chat box dialog I could tell it was after I ran out of bars in my inventory and it took them from my familiar.

When I try out the one you posted later for the item bug I'll try my best to see exactly what happens.

Thanks

Ah I see, I may have missed something with the EOC update since I didn't test again with familiars - Thanks for the feedback!

From: Ashaman88
Ok try running this

http://paste.villavu.com/show/3653/

and tell me what it says when it shuts down!

Ok it says "It looks like you're out of supplies shutting down
inventory count is 25 Tell Ashaman this!!!"

From: nkd2009
Ok it says "It looks like you're out of supplies shutting down
inventory count is 25 Tell Ashaman this!!!"

So it printed that even though there was a full inventory when you watched it?

From: Ashaman88
So it printed that even though there was a full inventory when you watched it?

ya it withdrew a full inventory and then the script said that. idk why. anything else u want me to try?

From: nkd2009
ya it withdrew a full inventory and then the script said that. idk why. anything else u want me to try?

I think I will make it take a screen shot at the same time that happens. It sounds like something is up with the include! You are using mith or addy bars? I don't see why it would think you only had 25 items!

Ok so I used the script you posted and this is what I got..


I still had ~3k mith bars in bank.

It also stopped 2 times previously but it just said I ran out of items or whatever and it sat in the bank right clicked on the bars like so…


Anyways it only started making plateskirts once and it was as I was also browsing the forums so I didn't catch it. When I just leave the bot running and get off the computer it seems to not mess it up, kinda weird.

**As I was typing this I actually saw what happened and I found another problem. My yak go stuck in the bank stall some how and when it tries to interact, it just does nothing. So I moved my character manually and restarted the script. It never refilled my yak so after it smithed my inventory and took my BoB it had enough bars to make a plateskirt and clicked it for some reason and doesn't correct itself

Also I have a suggestion you could maybe take up one day if you want to improve the speed and it's just to do with familiars.
Normally it just waits for you to run out of bars in your inventory then it will take BoB and click on the anvil again. Then, because I'm using a pack yak I will still have bars left over after so as I'm smithing the "second inventory" I'll call it, it takes the BoB again, but this time while I'm actually smithing. For some reason (maybe you wanted it to work this way) it will, almost everytime, right click the most south anvil right after it takes the BoB (for the 3rd time) and will make the last platebody on it as you can see from this picture…

(it will then click 'smith' make the last plate on that anvil then bank)

As you probably know, when your smithing you can use your summoning 'left-click' option to take bars out of you BoB without interrupting the skill itself, thus taking fewer clicks to make everything and its just faster.
If you could implement that somehow that would be awesome but it's just a suggestion:P

Dude that is great feedback! I think you solved my problems! I should be able to fix everything thanks!

From: Ashaman88
Dude that is great feedback! I think you solved my problems! I should be able to fix everything thanks!

No problem, you put a lot of work into making and maintaining these so I'm just trying to help as much as i can.

Also my yak just got stuck in the bank booth again so i manually moved it then watched it carefully when i restared it and found out exactly what happens.
It doesn't refill the BoB for some reason so it goes to the anvil, does the inventory then trys to take BoB but its empty…so when it clicks the anvil runescape automatically sets it to make the next best thing which is a plateskirt(since I have 3 bars left) and the script never corrects itself.

Yeah that is silly of Rs! But I will re input a failsafe I used to have that wasn't needed before (calling familiar to you while in bank)

From: Ashaman88
I think I will make it take a screen shot at the same time that happens. It sounds like something is up with the include! You are using mith or addy bars? I don't see why it would think you only had 25 items!

im using addy bars to make addy plates. Ya idk why it thinks that either. super strange.

-v2.1 Edits to summoning, couple bug fixes, added a screenshot taker if you get a inventory no full message


Send me that image if you get the no inventory full message!

Still need to tweak a few other things, and not positive if that fixed the withdrawing bugss

Been trying out the new update and it been working fairly good except for a couple things.

Most of the time it's able to use all of my bars (including my BoB) without stopping so thats good but after It finishes smithing all of the items it continues to click 'take BoB' about 3 or 4 times, ~2 seconds apart. Then it will click the anvil, stay at the production screen for around 5 seconds, sometimes it will click take BoB again and click on the anvil and do nothing for about another 5 seconds then finally go bank.


Other than that I haven't have a withdrawing problem so far or a problem with it making plateskirts.

here is the photo. hope this helps

From: nkd2009

here is the photo. hope this helps

Ohhh I see! Turn off the custom icons thing! It is blocking the inventory!



As for the summoning those were just quick fixes I didn't test it hehe. Thanks for that feedback though ill actually test summoning for next version!

i must be retarded but what is the cutom icon thing? im glad its such an easy fix though! sorry for all the trouble.


EDIT: oh you mean somehow turn off the thing that makes the "withdraw one washing bowl" come up cuz thats blocking it from seeing a full inventory.

From: nkd2009
i must be retarded but what is the cutom icon thing? im glad its such an easy fix though! sorry for all the trouble.


EDIT: oh you mean somehow turn off the thing that makes the "withdraw one washing bowl" come up cuz thats blocking it from seeing a full inventory.

Yeah there is some graphics option for it, like mouse over text? I'll look it up and post it as a req!~

From: Ashaman88
Yeah there is some graphics option for it, like mouse over text? I'll look it up and post it as a req!~

haha ya its called mouse over text under custom graphics. Funny part is i almost unclicked that without even thinking when i was first setting it up. oh well. Thanks for sticking with me to figure out what was wrong! ill try the script now even though im pretty sure it should work perfectly! thanks again

From: nkd2009
haha ya its called mouse over text under custom graphics. Funny part is i almost unclicked that without even thinking when i was first setting it up. oh well. Thanks for sticking with me to figure out what was wrong! ill try the script now even though im pretty sure it should work perfectly! thanks again

Yeah I think it should do it! I think that mouse setting got turned on with the eoc update! Let me know if that does it!

works like a charm. thanks man! ill post a proggy if i get a long enough one.

From: nkd2009
works like a charm. thanks man! ill post a proggy if i get a long enough one.

Good to hear let me know how it goes!

From: Ashaman88
Good to hear let me know how it goes!

I need to test it but there is a chance that when the game session expires and it loads a new smart window the mouse over text setting gets put back on. Im not positive and am waiting for my game session to expire again but i think it did that the first time it expired. also is there anyway to for the script to realize when your run is fully recharged and to click it?

From: nkd2009
I need to test it but there is a chance that when the game session expires and it loads a new smart window the mouse over text setting gets put back on. Im not positive and am waiting for my game session to expire again but i think it did that the first time it expired. also is there anyway to for the script to realize when your run is fully recharged and to click it?

Yeah there is… I guess I never ran out when testing so I never put it in! Do you have a low agility level? And let me know about the graphics settings!

haha yes unfortunately I do. So i guess most people wont have that problem so you dont have to put it in if its to much work. Just confirmed though every time it reloads smart it resets the mouse over text for me and so i get the no inv full message pretty quick after. isnt a big deal, just cant run it longer then around 6 hours. is there some way to change it forever?

EIDT: it doesnt seem to reset the setting when i log out and log back in which is a little confusing. Maybe its user error somehow.

From: nkd2009
haha yes unfortunately I do. So i guess most people wont have that problem so you dont have to put it in if its to much work. Just confirmed though every time it reloads smart it resets the mouse over text for me and so i get the no inv full message pretty quick after. isnt a big deal, just cant run it longer then around 6 hours. is there some way to change it forever?

EIDT: it doesnt seem to reset the setting when i log out and log back in which is a little confusing. Maybe its user error somehow.

That is pretty strange…maybe try changing the setting in smart, close out smart, then restart smart /script and see if the settings revert again

Works flawless without summoning.

========AshamanSmither v2.1=========
Time Running: 8 Hours, 52 Minutes and 27 Seconds
Making: Adamant Platebody
Items Made: 4460
Experience Earned: 1492500
Experience/Hour: 168185
Items/Hour: 503
=========================================

Thanks!

From: sk8_tolivv
Works flawless without summoning.

========AshamanSmither v2.1=========
Time Running: 8 Hours, 52 Minutes and 27 Seconds
Making: Adamant Platebody
Items Made: 4460
Experience Earned: 1492500
Experience/Hour: 168185
Items/Hour: 503
=========================================

Thanks!

Awesome proggy man!

Quick question, could i use this to make gold bracelets or would the mold being necessary cause problems

From: SOUPalmighty
Quick question, could i use this to make gold bracelets or would the mold being necessary cause problems

Nope, you gotta make those on a furnace :( But stay tuned probably in the next few weeks I will release one

From: Ashaman88
Nope, you gotta make those on a furnace :( But stay tuned probably in the next few weeks I will release one

Good thing im in no rush haha, i think ima try and put one together myself

Is there any reason why when making adamant platebodies with a war tortoise, after you're done smithing the bars, the script clicks on the "take bob" button 3-4 times? It then clicks smith on the anvil again, then sits there for 5 seconds then goes back to the bank? Cuts my bodies/hour in half :s.

From: Austin
Is there any reason why when making adamant platebodies with a war tortoise, after you're done smithing the bars, the script clicks on the "take bob" button 3-4 times? It then clicks smith on the anvil again, then sits there for 5 seconds then goes back to the bank? Cuts my bodies/hour in half :s.

Does the same for me with a yak, I think he already knows but just hasn't had the time to fix it. Just use no familiar and it works fine until he updates it.

From: Austin
Is there any reason why when making adamant platebodies with a war tortoise, after you're done smithing the bars, the script clicks on the "take bob" button 3-4 times? It then clicks smith on the anvil again, then sits there for 5 seconds then goes back to the bank? Cuts my bodies/hour in half :s.

Yeah summoning is a little bugged atm until I can get around to it :P Pretty much it was a speed improvement but I left some old stuff in there on accident hehe

From: Ashaman88
Yeah summoning is a little bugged atm until I can get around to it :P Pretty much it was a speed improvement but I left some old stuff in there on accident hehe

Oh, ok. Yeah after it brings the smith window up when you have no bars it says "Took too long for xp to change" then goes to the bank.

From: Austin
Oh, ok. Yeah after it brings the smith window up when you have no bars it says "Took too long for xp to change" then goes to the bank.

Yeah it's confused because I had it get the bars earlier than that piece of code wanted hehe

It looks like you"re out of supplies, shutting down!
Screenshot saved, send to Ashaman if you"re not really out of bars!
Inventory Count is: 12 Tell Ashaman this!!!
Successfully executed.

i have 11k bars in top right spot? i cant find the screenshot either? =/

EDIT:

From: zunkill
It looks like you"re out of supplies, shutting down!
Screenshot saved, send to Ashaman if you"re not really out of bars!
Inventory Count is: 12 Tell Ashaman this!!!
Successfully executed.

i have 11k bars in top right spot? i cant find the screenshot either? =/

EDIT:

turn off mouse over item graphics option, need to add that to OP!

From: Ashaman88
turn off mouse over item graphics option, need to add that to OP!

imo its a rather effective anti-leech haha

ooo oki dokes didnt realize the graphic option upsets script =/

From: DannyRS
imo its a rather effective anti-leech haha

haha true

From: zunkill
ooo oki dokes didnt realize the graphic option upsets script =/

well it's blocking the inventory, and the built in srl functions can't see that the inventory is full :/ so my failsafe has it shut down

========AshamanSmither v2.1=========
Time Running: 1 Hours, 55 Minutes and 37 Seconds
Making: Adamant ######## —– ill tell what it is over pm if you need ^^
Items Made: 2240
Experience Earned: 143032
Experience/Hour: 74217
Items/Hour: 1162
=========================================
Time until break: 08:04:22

thought i'd leave considering i caused a ruckus earlier :P

From: zunkill
========AshamanSmither v2.1=========
Time Running: 1 Hours, 55 Minutes and 37 Seconds
Making: Adamant ######## —– ill tell what it is over pm if you need ^^
Items Made: 2240
Experience Earned: 143032
Experience/Hour: 74217
Items/Hour: 1162
=========================================
Time until break: 08:04:22

thought i'd leave considering i caused a ruckus earlier :P

Sweet, glad it's working well!

========AshamanSmither v2.1=========
Time Running: 3 Hours, 14 Minutes and 58 Seconds
Making: Adamant Bolt
Items Made: 3780
Experience Earned: 240786
Experience/Hour: 74095
Items/Hour: 1163
=========================================
Time until break: 06:45:01

merry xmas lol XD i got bored this morning whilst driving lesson was on so i set it up and forgot works perfectly no problems yet =]

From: zunkill
========AshamanSmither v2.1=========
Time Running: 3 Hours, 14 Minutes and 58 Seconds
Making: Adamant Bolt
Items Made: 3780
Experience Earned: 240786
Experience/Hour: 74095
Items/Hour: 1163
=========================================
Time until break: 06:45:01

merry xmas lol XD i got bored this morning whilst driving lesson was on so i set it up and forgot works perfectly no problems yet =]

Very nice! I still need to fix up summoning though!

ima use for 99 when i can afford 99 -.- in process off buying torva atm :P

From: zunkill
ima use for 99 when i can afford 99 -.- in process off buying torva atm :P

Don't buy torva right now, wait until it lowers and evens out once more people get the new PoP armour. You should get that yourself actually.

Is there anything I can change in the script so when it banks it deposits all? Sorry I'm a noob with it :P

The reason being is, after making bodies and banks instead of right clicking and deposit all bodies or using the deposit all button it deposits them one by one and I can't imagine how much the XP is slowed down by, by doing this.

Cheers,

-Brow

From: Brow
Is there anything I can change in the script so when it banks it deposits all? Sorry I'm a noob with it :P

The reason being is, after making bodies and banks instead of right clicking and deposit all bodies or using the deposit all button it deposits them one by one and I can't imagine how much the XP is slowed down by, by doing this.

Cheers,

-Brow

I've heard that the deposit function is broken in the include - I'll have to go check it out. Are you using sc hammers?

The banking is still messed up with the includes, your script is not the only one banking one at a time. Other than that, looks beautiful, can't wait to use this for 99 mining!

From: whyME
The banking is still messed up with the includes, your script is not the only one banking one at a time. Other than that, looks beautiful, can't wait to use this for 99 mining!

Wrong thread :o

From: whyME
The banking is still messed up with the includes, your script is not the only one banking one at a time. Other than that, looks beautiful, can't wait to use this for 99 mining!

From: Austin
Wrong thread :o

hehe I still think he meant smithing. As for the banking - there is an update waiting to be approved by the devs. If you wanna fix it yourself go check out the srl 5 github. Hopefully they will get to accepting the fix :)

https://github.com/SRL/SRL-5/pull/137

From: Ashaman88
hehe I still think he meant smithing. As for the banking - there is an update waiting to be approved by the devs. If you wanna fix it yourself go check out the srl 5 github. Hopefully they will get to accepting the fix :)

https://github.com/SRL/SRL-5/pull/137

Oh, I thought the banking issue was just affecting the deposit boxes.

From: Austin
Oh, I thought the banking issue was just affecting the deposit boxes.

I think it is any script that use the deposit function :(

Yeah I definitely messed up and meant to say smithing :P with that SRL github, I removed the deleted lines and added in what the addition was in the Github, still having the banking problem though :S..everything looks fine, I'll probably just wait for the SRL update as I'm pretty much rubbish at scripting.

From: whyME
Yeah I definitely messed up and meant to say smithing :P with that SRL github, I removed the deleted lines and added in what the addition was in the Github, still having the banking problem though :S..everything looks fine, I'll probably just wait for the SRL update as I'm pretty much rubbish at scripting.

You should have an srl update let me know if that fixes it!

working great no problems only the same with those other people posting before me: depositing only 1 platebody at time not all at same. but i dont mind still great xp, keep up the good work ! ;)

From: viljo
working great no problems only the same with those other people posting before me: depositing only 1 platebody at time not all at same. but i dont mind still great xp, keep up the good work ! ;)

Lame is your srl updated? I'll test today and if it is still there submit a fix to the include

From: Ashaman88
Lame is your srl updated? I'll test today and if it is still there submit a fix to the include

my srl is updated, i dont mind about the slow deposit just wondering why its doin it slowly

From: viljo
my srl is updated, i dont mind about the slow deposit just wondering why its doin it slowly

The deposit all function broke in the include - I thought someone had pushed a fix, but maybe not. I'll check it out though

From: viljo
my srl is updated, i dont mind about the slow deposit just wondering why its doin it slowly

Killer has one and he linked to it in the OP of his superheating script. That one fixed the problem for me, maybe you want to try it? I think that Justin also had one somewhere.

From: Austin
Killer has one and he linked to it in the OP of his superheating script. That one fixed the problem for me, maybe you want to try it? I think that Justin also had one somewhere.

i tried that and did not work, problem might be me also :D thank you for help :redface:

From: viljo
i tried that and did not work, problem might be me also :D thank you for help :redface:

wierd.. http://villavu.com/forum/showthread.php?t=94947 <– my fix + more stuff fixed by shatterhand :p

From: viljo
i tried that and did not work, problem might be me also :D thank you for help :redface:

Ok then. And no problem!

@Killer: Oh yeah, it was Shatterhand, not Justin.

From: The Killer
wierd.. http://villavu.com/forum/showthread.php?t=94947 <– my fix + more stuff fixed by shatterhand :p

i dont know what im doin wrong i open C:\Simba\Includes\SRL\SRL\core\bank.simba replace the code there with that shatterhands and still not working :/

Actually it might be my bad - lemme check somethin

-v2.2 Fix depositing issue, patched up some stuff with familiars

now banking works like a dream. thank you ashaman ! :)

From: viljo
now banking works like a dream. thank you ashaman ! :)

np :) Glad to hear it

Hey can you please fix this

Screenshot saved, send to Ashaman if you"re not really out of bars!
Inventory Count is: 24 Tell Ashaman this!!!


sometimes(because my computer is slow) something will hover over the inventory and it wont count it.

Let me try to explain this in better english.

Sometimes the mouse will hover over something in the bank. And the explanation tool-tip will cover the inventory.
image
If you add like a fail safe or something im sure it would be fine.


Edit:

I was able to get around it by doing this. But Im so new to scripting, im sure there are better methods

If ChooseOptionMulti(['Withdraw-All', 'w-A']) Then
>> HumanMMouse(250,250,40,48); <<
MarkTime(T);
If (TimeFromMark(T)>5000) And (FindDTM(Pouch, X, Y, MIX1, MIY1, MIX2, MIY2)) Then
Break;
HumanMMouse(250,250,40,48);

From: padlockcode
Hey can you please fix this

Screenshot saved, send to Ashaman if you"re not really out of bars!
Inventory Count is: 24 Tell Ashaman this!!!


sometimes(because my computer is slow) something will hover over the inventory and it wont count it.

Let me try to explain this in better english.

Sometimes the mouse will hover over something in the bank. And the explanation tool-tip will cover the inventory.
image
If you add like a fail safe or something im sure it would be fine.


Edit:

I was able to get around it by doing this. But Im so new to scripting, im sure there are better methods

If ChooseOptionMulti(['Withdraw-All', 'w-A']) Then
>> HumanMMouse(250,250,40,48); <<
MarkTime(T);
If (TimeFromMark(T)>5000) And (FindDTM(Pouch, X, Y, MIX1, MIY1, MIX2, MIY2)) Then
Break;
HumanMMouse(250,250,40,48);

Turn off 'Mouseover Text' in your graphic options.

From: sk8_tolivv
Turn off 'Mouseover Text' in your graphic options.

:duh:

From: padlockcode
:duh:

Yeah sorry I forgot to add that to the OP

ive got smithing from 85 to 96 with this script so far and i came across with one issue my xp counter turned to "lots" but i had smithing xp counter under the "total" or what ever, when it turned lots script started to make 3 platebodys instead of 5 but when i hide the "lots" from the corner and have only smithing xp there it works again just letting you know ;)

From: viljo
ive got smithing from 85 to 96 with this script so far and i came across with one issue my xp counter turned to "lots" but i had smithing xp counter under the "total" or what ever, when it turned lots script started to make 3 platebodys instead of 5 but when i hide the "lots" from the corner and have only smithing xp there it works again just letting you know ;)

Yeah the top bar shown has to be smithing or total and can't say 'lots' :) As long as you just disable the lots one you will be fine - It's one of the scripts failsafes

Can't get the summoning to work with my tort. It summons the tort, then right clicks onto the pet interface than continues to do nothing. Any advice on this issue?

From: Snowskate
Can't get the summoning to work with my tort. It summons the tort, then right clicks onto the pet interface than continues to do nothing. Any advice on this issue?

aw might be something with the pet update. Does it select an option? Just the pet interface option? If so just gotta wait for an update, but it's not a huge change though

From: Ashaman88
aw might be something with the pet update. Does it select an option? Just the pet interface option? If so just gotta wait for an update, but it's not a huge change though

No, it does not select any options after opening the pet interface. I tried to play around with it to fool it but it is happening on both the tort and terror bird so there must just be something wrong with the execution or something. Way too rusty on scripting to figure it out lol.

From: Snowskate
No, it does not select any options after opening the pet interface. I tried to play around with it to fool it but it is happening on both the tort and terror bird so there must just be something wrong with the execution or something. Way too rusty on scripting to figure it out lol.

It's just the update from the new pets - There is a new option when it right clicks that gets it confused. It is fixed in my prayer script - I just haven't changed the few lines to fix this one (forgot about it)

Hey Ashaman, and others. Sorry that I have no posts (had an old account but couldn't remember the password)
I've updated everything as far as I'm aware, and all scripts that I've tried work, other than this one. It did work, but I can't get it to now. I know I've seen this kind of error before on other threads but I can't figure out how to fix this, especially when other scripts work;
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(282:145): Invalid number of parameters at line 281
Compiling failed.

As I said, I think I've updated everything. Sorry to be a bonehead when it comes to this stuff

got 99 smithing with this script, worked like a dream only problem i had was me :D keep up the good work ! :)

Edit: CaptainObivous i think you are using smart 8 ? {$Define SMART} <— this is found at the beginning on the script just make it look like this: {$Define SMART8} i think it works after that ;)

From: viljo
got 99 smithing with this script, worked like a dream only problem i had was me :D keep up the good work ! :)

Edit: CaptainObivous i think you are using smart 8 ? {$Define SMART} <— this is found at the beginning on the script just make it look like this: {$Define SMART8} i think it works after that ;)

Yeah just add the 8 and it should work! And congrats on the 99 that is awesome!

Incredible community, as always. Such a simple fix. Thank you so much guys :)
Your work could not be more appreciated Ash :)

Edit: Do you know when you're going to bump the familiar thingy? Or a quick fix? Thanks :)

From: CaptainObvious
Incredible community, as always. Such a simple fix. Thank you so much guys :)
Your work could not be more appreciated Ash :)

Edit: Do you know when you're going to bump the familiar thingy? Or a quick fix? Thanks :)

I was going to do it last night, but I totally forgot. I probably won't have time until this weekend - but we shall see

Can you point me in the right direction for modifying this script. After making 5 Mithril Platebodies (25 bars) to make 1 Mithril Platelegs (3 bars)?

From: padlockcode
Can you point me in the right direction for modifying this script. After making 5 Mithril Platebodies (25 bars) to make 1 Mithril Platelegs (3 bars)?

eh there is a few ways you could do it… you could just call another procedure when it's done make the bodies that will do the platelegs…

It looks like you"re out of supplies, shutting down!
Screenshot saved, send to Ashaman if you"re not really out of bars!
Inventory Count is: 4 Tell Ashaman this!!!
Successfully executed.

yeah i have 11k bars in top right no mouse over text cuz you told me last time :P and such ermm nothing much really just 7hrs in and then this happens randomly? XD oh well it told me to tell you :D ashamanception O.o

If someone could point me in the right direction on how to solve the problem the the bankers cannot be found and the anvil cannot be found.

Used this tool on 1/27/13 and the banker and the anvil couldnt be found … had to help it open banker and use anvil.

From: zunkill
yeah i have 11k bars in top right no mouse over text cuz you told me last time :P and such ermm nothing much really just 7hrs in and then this happens randomly? XD oh well it told me to tell you :D ashamanception O.o

pm me the pic :)

From: Rogue Sniper
If someone could point me in the right direction on how to solve the problem the the bankers cannot be found and the anvil cannot be found.

Used this tool on 1/27/13 and the banker and the anvil couldnt be found … had to help it open banker and use anvil.

It sounds like you don't have the correct graphics settings. Post a pic of them and also make sure you have updated srl and everything

Ok .. i had the mouseover text on .. turned it off and it works perfectly

Time Running: 2 Minutes and 44 Seconds
Making: Mithril Arrow
Items Made: 56
Experience Earned: 2200
Experience/Hour: 48255
Items/Hour: 1228

From: Rogue Sniper
Ok .. i had the mouseover text on .. turned it off and it works perfectly

Time Running: 2 Minutes and 44 Seconds
Making: Mithril Arrow
Items Made: 56
Experience Earned: 2200
Experience/Hour: 48255
Items/Hour: 1228

Nice glad to hear it

pm'd you the piccy also another question about another script :D thank you dude :D much love :P

From: zunkill
pm'd you the piccy also another question about another script :D thank you dude :D much love :P

Thanks and good luck with the question ;)

Just tried this out with terrorbird. At the beginning it right clicks summoning icon, and selects pet interface, causing the customization screen to come up and it just stays there.

From: bawz
Just tried this out with terrorbird. At the beginning it right clicks summoning icon, and selects pet interface, causing the customization screen to come up and it just stays there.

You started it with a familiar already summoned? Or it did this when you first started the script without a familiar present? Also would you mind posting a pic of the option menu open that shows the pet interface option. Need to double check something (may not have updated this scripts summoning since the new pet interface)

I tried both ways, same problem occured. I ran without familiar and encountered a seperate problem also, someone must have opened the door that leads downstairs in the bank, came back to find my char in there lol.

[ATTACH=CONFIG]19229[/ATTACH]

From: bawz
I tried both ways, same problem occured. I ran without familiar and encountered a seperate problem also, someone must have opened the door that leads downstairs in the bank, came back to find my char in there lol.

[ATTACH=CONFIG]19229[/ATTACH]

Hmm that is pretty strange - I've never seen the door thing, let me know if it happens again.

As for the summoning yeah I see a place where I didn't update for the pet interface update, I'll upload a fix tomorrow

Thanks for the feedback!

From: Ashaman88
Hmm that is pretty strange - I've never seen the door thing, let me know if it happens again.

As for the summoning yeah I see a place where I didn't update for the pet interface update, I'll upload a fix tomorrow

Thanks for the feedback!

Ran for 20k bars, and didn't encounter the door thing. Maybe just a one off, thanks for the quick replies!

From: bawz
Ran for 20k bars, and didn't encounter the door thing. Maybe just a one off, thanks for the quick replies!

np glad it's running well!

Is the summoning fixed now? :o

From: bawz
Is the summoning fixed now? :o

not until tonight ;) I'll post when it is up

ive nvr had a problem with ahsamans scripts but my friend is … has version of the script is just like mine (i set it up for him) but his runs to the anvil smiths 3-5 bars and then back to the bank …. ive taken his account and run it on mine and it does fine … runs prefectly for 2-3 hours then it breaks and then starts back up like its suppose to

any ideas on how to fix this problem

-v2.3 Summoning fix



Didn't test plz lemme know how it goes



Edit to the above: Does he have his production dialog thing enabled? That is key and also make sure mouse over text is turned off (also make sure everything is uptodate and all that)

From: Ashaman88
-v2.3 Summoning fix



Didn't test plz lemme know how it goes



Edit to the above: Does he have his production dialog thing enabled? That is key and also make sure mouse over text is turned off (also make sure everything is uptodate and all that)

where can i get 2.3? :D

From: bawz
where can i get 2.3? :D

haha oops forgot to upload….shh will do when I get home

From: Ashaman88
haha oops forgot to upload….shh will do when I get home

hehee no problem, ill test when its up :P

From: bawz
hehee no problem, ill test when its up :P

uploaded :)

Using terrorbird, after every 8 platebodys made my char clicks on the other anvil before banking, almost every time. Also noticed the progress report wasn't calculating correctly, going into minus figures.

From: bawz
Using terrorbird, after every 8 platebodys made my char clicks on the other anvil before banking, almost every time. Also noticed the progress report wasn't calculating correctly, going into minus figures.

What do you mean with the clicking on the anvil? So it does the first round of stuff, gets more bars for terrorbird, makes more bodies, then clicks on anvil again? Then what it just sits there with the smithing screen open or what?

As for proggy it would only do that if it was having a problem reading your xp bar

Ok so it banks and withdraws bars, fills terrorbird+invent and goes anvil, finishes off all bodies, then clicks the anvil to the south. Notices we have no bars left to smith, then banks, Just a small error. And my xp bar is set up to smithing, worked previously on 2.2.

From: bawz
Ok so it banks and withdraws bars, fills terrorbird+invent and goes anvil, finishes off all bodies, then clicks the anvil to the south. Notices we have no bars left to smith, then banks, Just a small error. And my xp bar is set up to smithing, worked previously on 2.2.

so it does withdraw from terrorbird fine? how many bars are left in your inventory when it clicks on the anvil again - none?

yeah none, it makes the full 8 platebodies from 40 bars, then instead of rebanking>runs to south anvil, clicks it. Brings up smithing interface, then banks.

From: bawz
yeah none, it makes the full 8 platebodies from 40 bars, then instead of rebanking>runs to south anvil, clicks it. Brings up smithing interface, then banks.

Alrighty I'll check out the terrorbird, should be an easy fix :)

From: Ashaman88
Alrighty I'll check out the terrorbird, should be an easy fix :)

Thanks man, just trying to give you some helpful feedback. Not to pickle ur brain 24/7 lol

From: bawz
Thanks man, just trying to give you some helpful feedback. Not to pickle ur brain 24/7 lol

Np :) I'll look into it in the next few days

Just got the message
It looks like you"re out of supplies, shutting down!
Screenshot saved, send to Ashaman if you"re not really out of bars!
Inventory Count is: 25 Tell Ashaman this!!!
Successfully executed.
I'm nto out of supplies D:

From: RlagkRud
Just got the message
It looks like you"re out of supplies, shutting down!
Screenshot saved, send to Ashaman if you"re not really out of bars!
Inventory Count is: 25 Tell Ashaman this!!!
Successfully executed.
I'm nto out of supplies D:

Turn off mouse over text

From: Ashaman88
Turn off mouse over text

I did thanks.
Also, for some reason the production bar says 'done' sometimes before its done smithing, causing me to bank early. This isn't a problem with the script but I wonder what's causing it. Bot detection method maybe?

From: RlagkRud
I did thanks.
Also, for some reason the production bar says 'done' sometimes before its done smithing, causing me to bank early. This isn't a problem with the script but I wonder what's causing it. Bot detection method maybe?

Most likely just a bug. Wait's can be added though for that

only if it was for OSR :)

Is it possible to use use for 07scape? need one really badly.

From: pure npk str
Is it possible to use use for 07scape? need one really badly.

Nope sorry :(

Hmm, what do you think I'm doing wrong?

What the script does is it withdraws the iron bars and one sc hammer correctly, makes them into platelegs, deposits them, but then it sits there for a long time? Eventually it withdraws a new amount of iron bars, but thats like after a long time.

I have mouseover text off, production dialogue on, fully zoomed out w/ min graphics, xp bar setup, and iron bars on upper right hand corner.

However, the script DOES work, but it just takes a while to do it. Am I making any mistakes?

From: Ashaman88
Nope sorry :(

I came back to check on the script and it was booted to lobby. I'll run it a few more times.

e: oops double post

ee: I messed around with it a bit and I noticed if I disabled smart, deposited the sc hammer manually and then enabled smart, the bot will
withdraw one sc hammer and 27 iron bars like normal and then proceed to smith. So is there a problem with the sc hammer not being deposited?

Here is how it looks when it just sits there

From: Rincewind
I came back to check on the script and it was booted to lobby. I'll run it a few more times.

e: oops double post

ee: I messed around with it a bit and I noticed if I disabled smart, deposited the sc hammer manually and then enabled smart, the bot will
withdraw one sc hammer and 27 iron bars like normal and then proceed to smith. So is there a problem with the sc hammer not being deposited?

Here is how it looks when it just sits there

Would you mind turning debug mode on and telling me what it says? I haven't used it in quite a bit, so I don't have a good idea on what the problem could be

could you add support for the scroll of efficiency because currently when you have it and you start the script the bot does one inventory and then opens the bank and gets confused and stays there.

From: acewentpro
could you add support for the scroll of efficiency because currently when you have it and you start the script the bot does one inventory and then opens the bank and gets confused and stays there.

Post a pic of your inventory when it is at the bank. Also turn on debug mode and tell me what it says. From what I recall I had the scroll and it worked fine back then.

[ATTACH=CONFIG]21501[/ATTACH]
I noticed while uploading this pic that the bot after a while continues to bank and deposit the remaining mith bars left over from the scroll of efficiency and continue after being stuck for 2 minutes. Then repeats this over again next inv.

From: acewentpro
[ATTACH=CONFIG]21501[/ATTACH]
I noticed while uploading this pic that the bot after a while continues to bank and deposit the remaining mith bars left over from the scroll of efficiency and continue after being stuck for 2 minutes. Then repeats this over again next inv.

I getcha, what about if you don't use the hammers? Mind running it with debug set to true?

when I set debug to true and sc hammers to false the script runs flawlessly.

From: acewentpro
when I set debug to true and sc hammers to false the script runs flawlessly.

Hmm then will you run it with debug on with sc hammers and tell me what the debug says?

From: Ashaman88
Hmm then will you run it with debug on with sc hammers and tell me what the debug says?

Looks like today were gonna be making some Mithril Platebodys
Goodluck!
ENTERING INBANK
You are inside bank
ENTERING BANKING PROCEDURE
BANKTIME: 1
ENTERING INBANK
You are inside bank
Summoning Timer in Minutes: 48
Found SChammer to withdraw
PTS=0
ENTERING WALKTOANVIL
Looking for path to anvil
Found AnvilMMDTM
ENTERING OPENSMITH
ENTERING SMITHMENU
SmithMenu color count: 0
ENTERING INBANK
You are not inside bank
Anvil Length: 282
Found Anvil, Clicking
Waiting for smithmenu
ENTERING SMITHMENU
SmithMenu color count: 0
ENTERING SMITHMENU
SmithMenu color count: 0
ENTERING SMITHMENU
SmithMenu color count: 739
ENTERING SMITH
ENTERING SMITHMENU
SmithMenu color count: 739
Smith menu is up
Moving mouse to armor type
Started smithing successfully, waiting to be done
ENTERING DONEBUTTON
DoneButton color count: 0
XP Changed
ENTERING DONEBUTTON
DoneButton color count: 0
XP Changed
ENTERING DONEBUTTON
DoneButton color count: 0
XP Changed
ENTERING DONEBUTTON
DoneButton color count: 0
ENTERING DONEBUTTON
DoneButton color count: 0
ENTERING DONEBUTTON
DoneButton color count: 673
========AshamanSmither v2.3=========
Time Running: 1 Minutes and 19 Seconds
Making: Mithril Platebody
Items Made: 5
Experience Earned: 2500
Experience/Hour: 113789
Items/Hour: 228
=========================================
Time until break: 10:05:55
ENTERING INBANK
You are not inside bank
ENTERING WALKTOBANK
Found bankmmdtm, clicking
ENTERING BANKING PROCEDURE
BANKTIME: 1
ENTERING INBANK
You are inside bank
Summoning Timer in Minutes: 48
ENTERING OPENBANKER
Banker Length: 169
Found banker, clicking
Found option to open bank
Opened bank successfull
Depositing Stuff

From: acewentpro
Looks like today were gonna be making some Mithril Platebodys
Goodluck!
ENTERING INBANK
You are inside bank
ENTERING BANKING PROCEDURE
BANKTIME: 1
ENTERING INBANK
You are inside bank
Summoning Timer in Minutes: 48
Found SChammer to withdraw
PTS=0
ENTERING WALKTOANVIL
Looking for path to anvil
Found AnvilMMDTM
ENTERING OPENSMITH
ENTERING SMITHMENU
SmithMenu color count: 0
ENTERING INBANK
You are not inside bank
Anvil Length: 282
Found Anvil, Clicking
Waiting for smithmenu
ENTERING SMITHMENU
SmithMenu color count: 0
ENTERING SMITHMENU
SmithMenu color count: 0
ENTERING SMITHMENU
SmithMenu color count: 739
ENTERING SMITH
ENTERING SMITHMENU
SmithMenu color count: 739
Smith menu is up
Moving mouse to armor type
Started smithing successfully, waiting to be done
ENTERING DONEBUTTON
DoneButton color count: 0
XP Changed
ENTERING DONEBUTTON
DoneButton color count: 0
XP Changed
ENTERING DONEBUTTON
DoneButton color count: 0
XP Changed
ENTERING DONEBUTTON
DoneButton color count: 0
ENTERING DONEBUTTON
DoneButton color count: 0
ENTERING DONEBUTTON
DoneButton color count: 673
========AshamanSmither v2.3=========
Time Running: 1 Minutes and 19 Seconds
Making: Mithril Platebody
Items Made: 5
Experience Earned: 2500
Experience/Hour: 113789
Items/Hour: 228
=========================================
Time until break: 10:05:55
ENTERING INBANK
You are not inside bank
ENTERING WALKTOBANK
Found bankmmdtm, clicking
ENTERING BANKING PROCEDURE
BANKTIME: 1
ENTERING INBANK
You are inside bank
Summoning Timer in Minutes: 48
ENTERING OPENBANKER
Banker Length: 169
Found banker, clicking
Found option to open bank
Opened bank successfull
Depositing Stuff

Then it doesn't say anything after that? Just sits there for a minute?

From: Ashaman88
Then it doesn't say anything after that? Just sits there for a minute?

yep it sits there and the continues and repeats after a min.

From: acewentpro
yep it sits there and the continues and repeats after a min.

ok great thanks! I'll take a look at it

Making bronze sq shields actually makes bronze maces.
also i had a full inventory of bronze bars and it told me i only had 24 an that the script was stopping.
btw ur script saves the pics to BMP might want to change to PNG so u can upload to here without converting.
[ATTACH=CONFIG]21855[/ATTACH]

E: turned off mouse over texted seems to be working fine now still making bronze maces instead of bronze sq shield though.
maybe if i make maces it'll make bronze sq shields ^_^

E1: Nope still makes maces D:

E2: bronze platelegs makes off-handed bronze scimitars

E3: When player runs over to the anvil and clicks on it just Disable Smart and choose the item you want to keep smithing and (you must smith at least one of the new item for it to be auto chosen.) then Enable Smart.

Time Running: 5 Minutes and 54 Seconds
Making: Bronze Square Shield <--
Items Made: 56
Experience Earned: 1400
Experience/Hour: 14197
Items/Hour: 568
=========================================
Time until break: 01:33:14

From: evoke99s
Making bronze sq shields actually makes bronze maces.
also i had a full inventory of bronze bars and it told me i only had 24 an that the script was stopping.
btw ur script saves the pics to BMP might want to change to PNG so u can upload to here without converting.
[ATTACH=CONFIG]21855[/ATTACH]

E: turned off mouse over texted seems to be working fine now still making bronze maces instead of bronze sq shield though.
maybe if i make maces it'll make bronze sq shields ^_^

E1: Nope still makes maces D:

E2: bronze platelegs makes off-handed bronze scimitars

E3: When player runs over to the anvil and clicks on it just Disable Smart and choose the item you want to keep smithing and (you must smith at least one of the new item for it to be auto chosen.) then Enable Smart.

Time Running: 5 Minutes and 54 Seconds
Making: Bronze Square Shield <--
Items Made: 56
Experience Earned: 1400
Experience/Hour: 14197
Items/Hour: 568
=========================================
Time until break: 01:33:14

The Bronze table might be janked up, they've probably switched the table around since I last updated (very long time ago). Thanks for the feedback and glad you figured out the mouse over text issue!

did the same thing with iron, found a way around so it will smith what i want it to though :)
if you need help of screen shots of location of everything ill be more then happy to help!
(not much one to code but ill help any way i can! :D

From: evoke99s
did the same thing with iron, found a way around so it will smith what i want it to though :)
if you need help of screen shots of location of everything ill be more then happy to help!
(not much one to code but ill help any way i can! :D

Yeah things got shifted it seems. I will probably wait until rs3 comes out to redo the coords - for now just gotta guess which setting will actually select the armor you want ;)

From: Ashaman88
Yeah things got shifted it seems. I will probably wait until rs3 comes out to redo the coords - for now just gotta guess which setting will actually select the armor you want ;)

E: Still is a pretty epic script even though it doesn't choose the correct item :P

I actually found a way to get it to smith what i want so its okay :D

If you want it to smith a specific item,
start script choosing whatever item when it walks to anvil and clicks on it
disable smart, make one of the item u want.
then enable smart.
it should then reclick the anvil an make that desired item :)

From: evoke99s
E: Still is a pretty epic script even though it doesn't choose the correct item :P

I actually found a way to get it to smith what i want so its okay :D

If you want it to smith a specific item,
start script choosing whatever item when it walks to anvil and clicks on it
disable smart, make one of the item u want.
then enable smart.
it should then reclick the anvil an make that desired item :)

Yeah that will work until the sixhourfix. I guess I should check out the new smithing interface in the beta

I didn't even realize you had a smither. Then I decided to actually look at the list of scripts you have, and it's a pretty massive list o.O

And here I am feeling lazy to keep more than 1 script up to date :p

From: Kevin
I didn't even realize you had a smither. Then I decided to actually look at the list of scripts you have, and it's a pretty massive list o.O

And here I am feeling lazy to keep more than 1 script up to date :p

It can get overwhelming :) just need jagex to stop changing haha

Does anyone know if this works with rs3 or not yet?

From: JDBORED
Does anyone know if this works with rs3 or not yet?

I think I know and no it doesn't. Not until SRL6 comes out

-v3.0 SRL6 RS3 release

Be sure to read the OP instructions again. Also note that summoning is disabled for now :)

Could you please include a link for the SPS .png image?

From: IL TJ
Could you please include a link for the SPS .png image?

haha oops good call uploading now

edit: it's in the OP now

Thanks! Anvil detection isn't working very well at all for me. It has only worked once, and even then it wouldn't click the smelt button. This is with the client all the way zoomed out and all client settings as specified.

From: IL TJ
Thanks! Anvil detection isn't working very well at all for me. It has only worked once, and even then it wouldn't click the smelt button. This is with the client all the way zoomed out and all client settings as specified.

You mean it clicked on the anvil and then didn't click the big blue button? If so then you haven't setup something correctly. Doublecheck for an srl update. Been running it 3 hours several times

From: Ashaman88
You mean it clicked on the anvil and then didn't click the big blue button? If so then you haven't setup something correctly. Doublecheck for an srl update. Been running it 3 hours several times

Yup you are right. I fixed it and its running fairly stable now.

From: IL TJ
Yup you are right. I fixed it and its running fairly stable now.

Sweet let me know if it runs into any issues

From: Ashaman88
Sweet let me know if it runs into any issues

Yes I am having an issue. When I tried to run the script today I ran into the following issues.

FailedOpeningBanker
Exception in Script: Runtime error: "The given DTM Index[0] doesn't exist" at line 170, column 10
The following bitmaps were not freed: [Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]

Did the game update this morning break the script or am I do something wrong again?

From: IL TJ
Yes I am having an issue. When I tried to run the script today I ran into the following issues.

FailedOpeningBanker
Exception in Script: Runtime error: "The given DTM Index[0] doesn't exist" at line 170, column 10
The following bitmaps were not freed: [Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]

Did the game update this morning break the script or am I do something wrong again?

Hmm looks like the update broke the include. I'll fix it and submit a pull to the srl include (banker colors were updated)

From: Ashaman88
Hmm looks like the update broke the include. I'll fix it and submit a pull to the srl include (banker colors were updated)

Okay that makes sense. I'll be sure to let you know how it works for me after the fix!

From: IL TJ
Okay that makes sense. I'll be sure to let you know how it works for me after the fix!

If you wanna change it manually see the pull request here:
https://github.com/SRL/SRL-6/pull/96

Also the anvil colors may need some updating. But with that I'll include the playermanager form as well.

From: Ashaman88
If you wanna change it manually see the pull request here:
https://github.com/SRL/SRL-6/pull/96

Also the anvil colors may need some updating. But with that I'll include the playermanager form as well.

Alright thanks. I updated both colors and it appears to work.

Looking great! Thanks Ashaman88 :D. Which scripts are you planning to update to SRL6 next?

From: w00ty
Looking great! Thanks Ashaman88 :D. Which scripts are you planning to update to SRL6 next?

I'm really not sure haha. I'll probably work on updating the ones already out first.

Alright :), anyways, good work. I just posted a proggy on your GemCutter, works great too!

EDIT: Your Gilded Altar and Oak Doorer scripts are looking so sexy :3

From: w00ty
Alright :), anyways, good work. I just posted a proggy on your GemCutter, works great too!

EDIT: Your Gilded Altar and Oak Doorer scripts are looking so sexy :3

Gilded Altar will take a good while to get updated… Doorer should be pretty easy though

From: IL TJ
Thanks! Anvil detection isn't working very well at all for me. It has only worked once, and even then it wouldn't click the smelt button. This is with the client all the way zoomed out and all client settings as specified.

Hey asha, I am having the same problem as this guy - it runs to the anvil and stands next to it like it can't see it.

My blue button is fine because I use your herb/fletch script all the time.

From: badezy
Hey asha, I am having the same problem as this guy - it runs to the anvil and stands next to it like it can't see it.

My blue button is fine because I use your herb/fletch script all the time.

Try reloading smart - I don't think I've pushed the update that has more anvil colors (they recently updated the anvil)

From: Ashaman88
Try reloading smart - I don't think I've pushed the update that has more anvil colors (they recently updated the anvil)

Same story mate :( - just not picking up the anvil. I have tried reloading numerous times.

From: badezy
Same story mate :( - just not picking up the anvil. I have tried reloading numerous times.

Yeah need to push out those updated colors :) hold tight I'll let ya know when it's been pushed

From: Ashaman88
Yeah need to push out those updated colors :) hold tight I'll let ya know when it's been pushed

You're a superstar - thanks mate.

From: badezy
You're a superstar - thanks mate.

V3.0 pushed, fixes for anvil, added playerform, added option to use directx mode (must manually download brandons plugin for now) - this is so that the minimap bug wont show up since the script uses the minimap as a failsafe. Few other tweaks


Let me know if that works for you guys

Hey asha - anvil works perfectly, but the blue button isn't. I know you say this is to do with a setup issue on the users end, but I am using your herblore script right now and it's fine… has anything else changed?

I tried with DirectX also and still no luck mate. Happy to TV if you'd like skype is baden.lucas

Show me a pic of it stuck with the screen open and also what you have typed into form please

Fixed: I had to add a Productionscreen.click in.

From: badezy
Fixed: I had to add a Productionscreen.click in.

No you shouldn't have to add anything in. Please do the screenshots!

From: Ashaman88
No you shouldn't have to add anything in. Please do the screenshots!

Asha - is it possible the anvil colours have changed … again?

From: badezy
Asha - is it possible the anvil colours have changed … again?

Or I may not have grabbed enough of the new one. Drop me a screenshot if it hangs up

From: Ashaman88
Or I may not have grabbed enough of the new one. Drop me a screenshot if it hangs up

Mm, I closed and reopened it a few times and now it works again. Was getting stuck at anvil.

From: badezy
Mm, I closed and reopened it a few times and now it works again. Was getting stuck at anvil.

Yeah just drop me a screeny of it .png please when it happens

Ashaman,

The smither seems to get caught up when the smithing page is brought up, the mouse will sit over the smith button and do nothing else.
[ATTACH=CONFIG]22870[/ATTACH]
Thanks!

From: celeph
Ashaman,

The smither seems to get caught up when the smithing page is brought up, the mouse will sit over the smith button and do nothing else.
[ATTACH=CONFIG]22870[/ATTACH]
Thanks!

Reset to oldschool. Unlock interfaces. drag chatbox down. left click and drag xp bar down (don't do the edit interfaces thing). lock toolbar.


Then run it again. Your interfaces get shifted if you do the edit interfaces things. Also make sure you input the correct box in the form

From: Ashaman88
Reset to oldschool. Unlock interfaces. drag chatbox down. left click and drag xp bar down (don't do the edit interfaces thing). lock toolbar.


Then run it again. Your interfaces get shifted if you do the edit interfaces things. Also make sure you input the correct box in the form

Restarting the client seemed to make it work, thanks!

its not clicking on the anvil :(

From: ruskoisadude
its not clicking on the anvil :(

send me a pic - also try restarting smart.

Same problem here! Not clicking anvil! :/

Think you need to update anvil colours again mate, not working again.

Help i am new to this.
Player file: MyGuy
Exception in Script: Runtime error: "Access violation" at line 760, column 39
The following bitmaps were not freed: [Minimap Mask]
File[C:\Simba\Includes\SRL-6/logs/SRL log (24-03-14 at 11.58.51 AM).txt] has not been freed in the script, freeing it now.

From: Xgremreaper
Help i am new to this.
Player file: MyGuy
Exception in Script: Runtime error: "Access violation" at line 760, column 39
The following bitmaps were not freed: [Minimap Mask]
File[C:\Simba\Includes\SRL-6/logs/SRL log (24-03-14 at 11.58.51 AM).txt] has not been freed in the script, freeing it now.

You setup your form wrong, check out the instructions one more gin

From: badezy
Think you need to update anvil colours again mate, not working again.

Curse them, yeah I need to check it out, thanks for the reminder though!

I still get the same thing even after i set everything up.
Player file: Playerlist
Exception in Script: Runtime error: "Access violation" at line 760, column 39
The following bitmaps were not freed: [Minimap Mask]
File[C:\Simba\Includes\SRL-6/logs/SRL log (24-03-14 at 01.53.04 PM).txt] has not been freed in the script, freeing it now.

NVM got it to work.

The bot gets stuck at the anvils. But i do know you said you where working on that so i will wait till you post an update.

v3.2 is out. You will need the most updated srl - there was a key update to the include about an hour ago, so you must update your include or it will not work properly

Hey Ashaman, the script spams this after the banking procedure:

ENTERING OPENSMITH
No anvil colors found

Maybe the bank interface update has something to do with it? I tried sampling new anvil colors but that didn't seem to fix it.

From: Hadley
Hey Ashaman, the script spams this after the banking procedure:

ENTERING OPENSMITH
No anvil colors found

Maybe the bank interface update has something to do with it? I tried sampling new anvil colors but that didn't seem to fix it.

Strange and what version are you using? Mind sending me a pic of the anvil when it wont detect it? I thought I did like 5 or 6 reloads to get the colors this time :/. Also try restarting smart.

I'm using V3.2

and it gets 1 tile east of the tile then spams the debug with:

ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found

And Smart has been restarted a couple times now.

Just run ACA and update the colours, hue, sat and tolerance and it works fine. findColorsTolerance(tpa, 5132120, B, 4,colorSetting(2, 0.56, 0.53)); //silver seems to be working for me

v3.3 - added option to use bank presets to withdraw (faster withdrawing) - will not work the sc hammer though. fixed color and log bugs

it keep banking before finishing the load

From: nutta124
it keep banking before finishing the load

Yeah, seems to do the same thing for me. I'm making bronze hatchets, script starts fine, takes out bronze bars, goes to anvil, finishes making about 5 hatches, and then clicks banker.

Debug:

ENTERING OPENSMITH
Anvil Length: 158
-- isMouseOverText()
---- Current mouse-over text: ""
---- Current mouse-over text: "Smith Anvil"
---- Found "Smith" in mouse-over string: "Smith Anvil"
-- isMouseOverText(): True
Found Anvil, Clicking
Waiting for ProductionScreen.IsOpen
ENTERING OPENSMITH
ENTERING OPENSMITH
ENTERING SMITH
-- tabBackpack.countDTM(): Counted 28 items
Smith menu is up
---- TRSProductionScreen._scrollToItem(): result = true
---- TRSProductionScreen._scrollToItem(): result = true
---- TRSProductionScreen._scrollToItem(): result = true
---- TRSProductionScreen._getSelectedBox(): result = 12
---- TRSProductionScreen._scrollToItem(): result = true
---- TRSProductionScreen._scrollToItem(): result = true
---- TRSProductionScreen._getValidBoxes(): result = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12]
---- TRSProductionScreen._scrollToItem(): result = true
---- TRSProductionScreen._scrollToItem(): result = true
---- TRSProductionScreen._scrollToItem(): result = true
---- TRSProductionScreen._getSelectedBox(): result = 4
---- TRSProductionScreen.selectBox(): result = true
---- TRSProductionScreen.getSelectedBoxText(): result = Bronze hatchet
Started smithing successfully, waiting to be done
---- TRSProgressScreen.getTotalToMake(): result = 0
---- chatBox.getXP(): XP found: 325663
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
|                   AshamanSmither v3.3                     |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 28 Seconds                                   |
| Bronze hatchet's Made: 0         Made/H: 0                |
| Exp Earned: 37                   Exp/Hour: 4,630          |
|___________________________________________________________|
|___________________________________________________________|
Time until break: 10:09:21
ENTERING BANKING PROCEDURE
-- tabBackpack.countDTM(): Counted 25 items
-- TRSBankscreen.__openNPC()
---- TRSMinimap.getDots()
------ Found 12 minimap dots (ID: 4369)
---- TRSMinimap.getDots(): [{X = 700, Y = 50}, {X = 631, Y = 94}, {X = 639, Y = 94}, {X = 647, Y = 94}, {X = 655, Y = 94}, {X = 704, Y = 111}, {X = 728, Y = 127}, {X = 626, Y = 138}, {X = 634, Y = 138}, {X = 642, Y = 139}, {X = 651, Y = 139}, {X = 663, Y = 139}]
---- isMouseOverText()
------ Current mouse-over text: "Bank Banker"
------ Found "Bank" in mouse-over string: "Bank Banker"
---- isMouseOverText(): True
---- We found correct mouse-over text
---- Bankscreen or pinscreen never opened
---- isMouseOverText()
------ Current mouse-over text: ""
------ Current mouse-over text: "Bank Banker"
------ Found "Bank" in mouse-over string: "Bank Banker"
---- isMouseOverText(): True
---- We found correct mouse-over text
---- Bankscreen or pinscreen never opened
-- TRSBankscreen.__openNPC(): result = False
-- sps.getPlayerPos(): result = {X = 188, Y = 200}, took 94 ms
---- Waiting while the player is moving...
---- Waiting while the player is moving...
-- sps.walkToPos(): result = True
-- TRSBankscreen.__openNPC()
---- TRSMinimap.getDots()
------ Found 14 minimap dots (ID: 4369)
---- TRSMinimap.getDots(): [{X = 664, Y = 49}, {X = 700, Y = 50}, {X = 631, Y = 94}, {X = 639, Y = 94}, {X = 647, Y = 94}, {X = 655, Y = 94}, {X = 700, Y = 111}, {X = 728, Y = 127}, {X = 626, Y = 138}, {X = 634, Y = 138}, {X = 642, Y = 139}, {X = 650, Y = 139}, {X = 663, Y = 139}, {X = 679, Y = 139}]
---- isMouseOverText()
------ Current mouse-over text: ""
------ Current mouse-over text: "Bank Banker"
------ Found "Bank" in mouse-over string: "Bank Banker"
---- isMouseOverText(): True
---- We found correct mouse-over text
---- Bankscreen or pinscreen is open
-- TRSBankscreen.__openNPC(): result = True
Opened bank successfull
-- pinScreen.enter()
---- ERROR: The player's in isn't vaild!
---- ERROR: Cannot enter pin because the pin isnt vaild!
-- pinScreen.enter(): result = false
Depositing Stuff
-- TRSChooseOption._select():
---- Options found: [Deposit-1 Bronze hatchet, Deposit-5 Bronze hatchet, Deposit-10 Bronze hatchet, Deposit-28 Bronze hatchet, Deposit-X Bronze hatchet, Deposit-All Bronze hatchet, Wield Bronze hatchet, Examine Bronze hatchet, Cancel]
---- Found option "Deposit-All" in "Deposit-All Bronze hatchet"
-- TRSChooseOption.select() result = true
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
---- bankScreen.deposit(): True
-- bankScreen.packCountDTM(): Counted 13 items
-- TRSChooseOption._select():
---- Options found: [Withdraw-1 Bronze bar, Withdraw-5 Bronze bar, Withdraw-10 Bronze bar, Withdraw-28 Bronze bar, Withdraw-X Bronze bar, Withdraw-All Bronze bar, Withdraw-All but one Bronze bar, Examine Bronze bar, Cancel]
---- Found option "Withdraw-All" in "Withdraw-All Bronze bar"
-- TRSChooseOption.select() result = true
---- bankscreen.withdraw(): result = True
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
-- sps.getPlayerPos(): result = {X = 192, Y = 160}, took 94 ms

Manually stopped it.

yeah i think it's an include issue. i was actually just about to test it out yesterday

Ok the latest srl commit should fix everything. There was an issue with progresscreen detection in the include. Give it a few hours to push through

I cant even start the script

From: Apenkool
I cant even start the script

because ur a dumb nub u fgt, add my on Skype and i'll halp you

Script is working great, of course it would Ashaman made it.
How'd you get this good Ashaman, mad props.

Unsure why, but the script was unable to open the bank when first started. It sat in the bank repeating the following in debug:

-- TRSBankscreen.__openNPC()
---- TRSMinimap.getDots()
------ Found 0 minimap dots (ID: 4369)
---- TRSMinimap.getDots(): []
-- TRSBankscreen.__openNPC(): result = False
-- sps.getPlayerPos(): result = {X = 192, Y = 160}, took 78 ms

I attempted to update the BANK_NPC_BLUE colours in the bankscreen include myself but it didn't work.

Did the Tuesday update break the bot?
Was working great! Did over 4k bodies with it. Now it stalls and say the bitmaps were not freed correctly.

Figured out what the issue is, for some reason it will not open the bank. Perhaps it can't find it.
If I manually open the bank and start the script it works great.

– setupSRL()
—- Setting up SRL…
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found 1 free client(s), attempting to pair to one…
———- smartSetAsTarget(): Succesfully set SMART[7204] as Simba's target
——– Succesfully paired to a existing client, SMART[7204]
—— smartPairToExistingClient(): result = true
—— Succesfully initialized via pairing to a previously spawned client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…
—— TRSActionBar.__findButton(): Found the actionbar button @ {X = 566, Y = 397}
—— TRSActionBar.__find(): result = true (height = 75)
—— Dynamic interfaces have been set.
—- Client is ready.
—- Setup SRL in 124ms.
– setupSRL(): True
– sps.init()
—- Path exists (C:\Simba\Includes\SPS\img\Runescape_Surface\0_0VWB.png)
—- Setup area "0_0VWB" in 16ms
– sps.init()
—- chatBox.getXP(): No XP found
Goodluck!
ENTERING BANKING PROCEDURE
—- TRSGameTab.__initTabs(): Setup gametab properties
—- tabBackpack.countDTM(): Found no DTM matches
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 109 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 94 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 125 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 110 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 110 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 109 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 125 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 109 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 94 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 94 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 93 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 94 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 109 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 109 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 109 ms
– TRSBankscreen.__openNPC()
—- TRSMinimap.getDots()
—— Found 0 minimap dots (ID: 4369)
—- TRSMinimap.getDots(): []
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 191, Y = 167}, took 110 ms
– Succesfully freed SMART[7204]
Exception in Script: Runtime error: "The given DTM Index[0] doesn't exist" at line 264, column 10
The following bitmaps were not freed: [Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]

halp?

@nkd2009

The September 2 update broke parts of the include, so a lot of scripts are "broken" unless you fix them yourself. There's an update to the Simba client in the works, so we probably won't get an official fix until that's released.

From: KeepBotting
because ur a dumb nub u fgt, add my on Skype and i'll halp you

WTF! LOL xddddddd

My problem is: it doesn't come back from anvil to bank, so it just stops doing anything :s
Waiting new simba release:stirthepot:

Works well enough to smith a thousand bars. Thanks :)

Everything *should* be running smooth with this now with an updated include.

Bot takes items from the bank then just sits there. Also to note he does not use the correct bank area, the bot tends to go one over.

From: Xgremreaper
Bot takes items from the bank then just sits there. Also to note he does not use the correct bank area, the bot tends to go one over.

Hook me up with a pic of it just sitting there along with some debug please (run it in debug mode)

From: Ashaman88
Hook me up with a pic of it just sitting there along with some debug please (run it in debug mode)

That issue is probably because the SPS map is outdated (scale and icons have changed). Here's the new one if you want to compare.

Checking for script updates…
Online Version: 3.3
Local Version: 3.3
You have the latest version of the script!
SRL: Logfile = C:\Simba\Includes\SRL-6/logs/SRL log (15-10-14 at 12.15.42 PM).txt
– TPlayerArray.setup()
—- Attempting to load player(s) "[bethelm77@gmail.com]" from army "XgremreaperX"
—- Raf_GetPlayers()
—— Army exists, reading the players…
—- Raf_GetPlayers: Result = True
—- Loaded player: [email](Taken out to hide)[/email]
– TPlayerArray.setup(): Success

Player file: (Taken out to hide)
Minutes until Break: 12
# of Minutes to Break: 200
Minutes until Break: 30
Sacred Clay Hammer: False
Take Breaks: True
Switch Worlds (After Break): True
Logout if Mod is near: True

– setupSRL()
—- Setting up SRL…
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found 1 free client(s), attempting to pair to one…
——– Failed to pair to SMART[7064]
—— smartPairToExistingClient(): result = false
—— Attempting to spawn a new client..
—— smartCreateClient():
———- smartGetParameters(): Succesfully grabbed paramters
——– getJavaPath():
———- Attempting to search for your Java path
———- Found your java path @ C:\Program Files (x86)\Java\jre7\bin\java.exe
——– getJavaPath()
——– Using parameters [http://world45a.runescape.com/, f7526935169735432900]
——– Using plugins "d3d9.dll,OpenGL32.dll"
——– Succesfully spawned a client, attempting to target
———- smartSetAsTarget(): Succesfully set SMART[7584] as Simba's target
—— smartCreateClient(): result = true
—— Succesfully initialized via spawning a new client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…
—— __setInputBoxes(): Set username and password boxes
—- Client is ready.
—- Setup SRL in 18 Seconds
– setupSRL(): True
– TPlayer.login()
—- TPlayer.loginToLobby()
—— [email](Taken out to hide)[/email] ()
—— Entering username…
—— Entering password…
——– Saving screenshot: IP_address.png
—— Found lobby screen
—- TPlayer.loginToLobby(): True
—— TRSLobby.findPlayButton(): result = True
—— TRSActionBar.__findButton(): Found the actionbar button @ {X = 566, Y = 396}
—— TRSActionBar.__find(): result = true (height = 75)
—— Dynamic interfaces have been set.
—- Logged in: (Taken out to hide)
– TPlayer.login(): True
– sps.init()
—- Path exists (C:\Simba\Includes\SPS\img\Runescape_Surface\0_0VWB.png)
—- Setup area "0_0VWB" in 219ms
– sps.init()
—- chatBox.getXP(): No XP found
Goodluck!
ENTERING BANKING PROCEDURE
—- TRSGameTab.__initTabs(): Setup gametab properties
– TRSGameTabs.openTab(2)
—- Tab is already visible, bringing to front
– TRSGameTabs.openTab(2): = True
—- tabBackpack.countDTM(): Found no DTM matches
– TRSBankscreen.__openNPC()
—- isMouseOverText()
—— Current mouse-over text: "Bank Bank booth"
—— Found "Bank" in mouse-over string: "Bank Bank booth"
—- isMouseOverText(): True
—- We found correct mouse-over text
—- Bankscreen or pinscreen is open
– TRSBankscreen.__openNPC(): result = True
Opened bank successfull
– pinScreen.enter()
—- Succesfully clicked number 7
—- Succesfully clicked number 1
—- Succesfully clicked number 4
—- Succesfully clicked number 1
—- Waiting for the outcome of the pin…
—- Succesfully entered pin
– pinScreen.enter(): result = True
– searching for bar type
– found bardtm
– auto detect bar: Iron
ENTERING OPENSMITH
Anvil Length: 237
– isMouseOverText()
—- Current mouse-over text: ""
—- Current mouse-over text: "Smith Anvil"
—- Found "Smith" in mouse-over string: "Smith Anvil"
– isMouseOverText(): True
Found Anvil, Clicking
Waiting for ProductionScreen.IsOpen
ENTERING OPENSMITH
ENTERING OPENSMITH
ENTERING SMITH
– tabBackpack.countDTM(): Counted 28 items
Smith menu is up
—- TRSProductionScreen._scrollToItem(): result = true
—- TRSProductionScreen._scrollToItem(): result = true
—- TRSProductionScreen._scrollToItem(): result = true
—- TRSProductionScreen._getSelectedBox(): result = 0
—- TRSProductionScreen._scrollToItem(): result = true
—- TRSProductionScreen._scrollToItem(): result = true
—- TRSProductionScreen._getValidBoxes(): result = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, 17, 18, 19, 20]
—- TRSProductionScreen._scrollToItem(): result = true
—- TRSProductionScreen._scrollToItem(): result = true
—- TRSProductionScreen._scrollToItem(): result = true
—- TRSProductionScreen._getSelectedBox(): result = 12
—- TRSProductionScreen.selectBox(): result = true
—- TRSProductionScreen.getSelectedBoxText(): result = Iron nails X15
Started smithing successfully, waiting to be done
—- TRSProgressScreen.getTotalToMake(): result = 5
progress is open
—- TRSProgressScreen.getButton(): result = 1
—- TRSProgressScreen.findButton(): result = False
progress is open
—- TRSProgressScreen.getButton(): result = 1
—- TRSProgressScreen.findButton(): result = False
Took too long for xp to change
—- chatBox.getXP(): No XP found
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| AshamanSmither v3.3 |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 1 Minutes and 22 Seconds |
| Iron nails X15's Made: 5 Made/H: 219 |
| Exp Earned: 0 Exp/Hour: 1,000 |
|___________________________________________________________|
|___________________________________________________________|
Time until break: 03:30:36
ENTERING BANKING PROCEDURE
– tabBackpack.countDTM(): Counted 3 items
– TRSBankscreen.__openNPC()
—- isMouseOverText()
—— Current mouse-over text: "Bank Banker"
—— Found "Bank" in mouse-over string: "Bank Banker"
—- isMouseOverText(): True
—- We found correct mouse-over text
—- Bankscreen or pinscreen is open
– TRSBankscreen.__openNPC(): result = True
Opened bank successfull
– pinScreen.enter()
—- ERROR: Cannot enter pin because the pinscreen is not open
– pinScreen.enter(): result = false
ENTERING OPENSMITH
Anvil Length: 121
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 125
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 126
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
– sps.getPlayerPos(): result = {X = 190, Y = 158}, took 78 ms
– sps.walkToPos(): result = False
ENTERING OPENSMITH
Anvil Length: 125
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 125
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 131
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 129
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 127
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 128
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 122
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 122
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 121
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 125
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 118
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 126
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 128
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 116
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 125
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 126
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 125
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 125
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 126
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 128
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
– isMouseOverText(): False
ENTERING OPENSMITH
Anvil Length: 128
– isMouseOverText()
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: "Store War tortoise"
—- Current mouse-over text: ""
—- Current mouse-over text: ""
—- Current mouse-over text: ""
—- Current mouse-over text: ""
– isMouseOverText(): False
ENTERING SMITH
– tabBackpack.countDTM(): Counted 28 items
—- chatBox.getXP(): No XP found
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| AshamanSmither v3.3 |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 1 Minutes and 36 Seconds |
| Iron nails X15's Made: 5 Made/H: 187 |
| Exp Earned: 0 Exp/Hour: 1,000 |
|___________________________________________________________|
|___________________________________________________________|
Time until break: 03:30:22
ENTERING BANKING PROCEDURE
– tabBackpack.countDTM(): Counted 28 items
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
– sps.getPlayerPos(): result = {X = 190, Y = 158}, took 78 ms
– sps.walkToPos(): result = False
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING SMITH
– tabBackpack.countDTM(): Counted 28 items
—- chatBox.getXP(): No XP found
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| AshamanSmither v3.3 |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 1 Minutes and 42 Seconds |
| Iron nails X15's Made: 5 Made/H: 175 |
| Exp Earned: 0 Exp/Hour: 1,000 |
|___________________________________________________________|
|___________________________________________________________|
Time until break: 03:30:16
ENTERING BANKING PROCEDURE
– tabBackpack.countDTM(): Counted 28 items
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
– sps.getPlayerPos(): result = {X = 190, Y = 158}, took 78 ms
– sps.walkToPos(): result = False
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING SMITH
– tabBackpack.countDTM(): Counted 28 items
—- chatBox.getXP(): No XP found
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| AshamanSmither v3.3 |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 1 Minutes and 48 Seconds |
| Iron nails X15's Made: 5 Made/H: 165 |
| Exp Earned: 0 Exp/Hour: 1,000 |
|___________________________________________________________|
|___________________________________________________________|
Time until break: 03:30:10
ENTERING BANKING PROCEDURE
– tabBackpack.countDTM(): Counted 28 items
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
– sps.getPlayerPos(): result = {X = 190, Y = 158}, took 93 ms
– sps.walkToPos(): result = False
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING SMITH
– tabBackpack.countDTM(): Counted 28 items
—- chatBox.getXP(): No XP found
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| AshamanSmither v3.3 |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 1 Minutes and 55 Seconds |
| Iron nails X15's Made: 5 Made/H: 156 |
| Exp Earned: 0 Exp/Hour: 1,000 |
|___________________________________________________________|
|___________________________________________________________|
Time until break: 03:30:03
ENTERING BANKING PROCEDURE
– tabBackpack.countDTM(): Counted 28 items
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
– sps.getPlayerPos(): result = {X = 190, Y = 158}, took 78 ms
– sps.walkToPos(): result = False
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING SMITH
– tabBackpack.countDTM(): Counted 28 items
—- chatBox.getXP(): No XP found
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| AshamanSmither v3.3 |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 2 Minutes and 1 Seconds |
| Iron nails X15's Made: 5 Made/H: 148 |
| Exp Earned: 0 Exp/Hour: 1,000 |
|___________________________________________________________|
|___________________________________________________________|
Time until break: 03:29:57
ENTERING BANKING PROCEDURE
– tabBackpack.countDTM(): Counted 28 items
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
– sps.getPlayerPos(): result = {X = 190, Y = 158}, took 78 ms
– sps.walkToPos(): result = False
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH
No anvil colors found
ENTERING OPENSMITH


Also to note that is not my War tortoise is was a random one.

1st) you need to have your xp bar over the top right of the chatbox, that's what the initial timeout happened.

2nd) did it immediately go to the second banker instead of the first? also there is something up with SPS using anyangle. I've been trying to debug why it's messed up, but no luck so far (think it's an include issue). That's why it didn't walk into the anvil area

From: Ashaman88
1st) you need to have your xp bar over the top right of the chatbox, that's what the initial timeout happened.

2nd) did it immediately go to the second banker instead of the first? also there is something up with SPS using anyangle. I've been trying to debug why it's messed up, but no luck so far (think it's an include issue). That's why it didn't walk into the anvil area

its working now thank you.

Yea that anyAngle is pretty buggy, doesn't move from the bank sometimes (it could be your map is so old, it's got the symbols from like 6 months ago).

There is also this issue with the production screen where it clicks the item but it ends up making something else. This is prolly server-side though.

E: As long as it can see the anvil from the bank (and vice versa) it's sweet. Will post proggy ;)

yea i've tried using the most updated map and was still having the same problems.. i think anyangle is just screwy for some reason (i failed figuring out the maths in the include)… Need to figure it out or just go to symbol walking. also sps.getmypos works just fine it's one of the walking pos that is failing for anyangle, cant remember the specific function at the top of my head

|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
|                   AshamanSmither v3.3                     |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 4 Hours, 52 Minutes and 36 Seconds           |
| Bronze arrowheads x15's Made: 5,980Made/H: 1,226            |
| Exp Earned: 71,150               Exp/Hour: 14,589         |
|___________________________________________________________|
|___________________________________________________________|
Successfully executed.

Nice :) Was 15k xp/h but was running last 20min back and forth doing nothing as out of bars

From: The Mayor

|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
|                   AshamanSmither v3.3                     |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 4 Hours, 52 Minutes and 36 Seconds           |
| Bronze arrowheads x15's Made: 5,980Made/H: 1,226            |
| Exp Earned: 71,150               Exp/Hour: 14,589         |
|___________________________________________________________|
|___________________________________________________________|
Successfully executed.

Nice :) Was 15k xp/h but was running last 20min back and forth doing nothing as out of bars

Ah using presets? I don't think the logic has been updated for that…hmm was the inventory empty with just arrowheads when it was doing that?

From: Ashaman88
Ah using presets? I don't think the logic has been updated for that…hmm was the inventory empty with just arrowheads when it was doing that?

I'm pretty sure it was using presets!

|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
|                   AshamanSmither v3.3                     |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 1 Hours, 26 Minutes and 5 Seconds            |
| Steel platebody's Made: 755      Made/H: 526              |
| Exp Earned: 282,223              Exp/Hour: 196,685        |
|___________________________________________________________|
|___________________________________________________________|

working great :D

From: I F A I L

|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
|                   AshamanSmither v3.3                     |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 1 Hours, 26 Minutes and 5 Seconds            |
| Steel platebody's Made: 755      Made/H: 526              |
| Exp Earned: 282,223              Exp/Hour: 196,685        |
|___________________________________________________________|
|___________________________________________________________|

working great :D

Enjoy them XP's!

haha I surely will

|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
|                   AshamanSmither v3.3                     |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 1 Hours, 41 Minutes and 48 Seconds           |
| Steel platebody's Made: 1,085    Made/H: 639              |
| Exp Earned: 358,451              Exp/Hour: 211,256        |
|___________________________________________________________|
|___________________________________________________________|

82-85 done, aww yush, thanks for the awesome script

From: I F A I L
haha I surely will

|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
|                   AshamanSmither v3.3                     |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 1 Hours, 41 Minutes and 48 Seconds           |
| Steel platebody's Made: 1,085    Made/H: 639              |
| Exp Earned: 358,451              Exp/Hour: 211,256        |
|___________________________________________________________|
|___________________________________________________________|

82-85 done, aww yush, thanks for the awesome script

Jelly of that xp/hr - gotta love bxp rates. Also hopefully update with sps issues coming soon

Script has been great.

Up to 120k+ an hour, and ran for 6+ hours. (Making Mithril Platebodies)

Until I noticed 90% of the time I stop right before VWB doors, in route to Anvil.

http://i.imgur.com/LBoTjn6.png
http://i.imgur.com/l0nfMdJ.png

Maybe there is something I can change?

Thanks in advance! (:

EDIT:

Seems to be only when using Presets.

The quicker the withdrawal, the more likely it is to get stuck.
(Tested this myself)

ALSO

Now it keeps wanting to click the second banker, resulting in not being able to see the anvil after withdrawal. ):

Need some assistance.

Manually adjusted camera after disabling SMART then re-enabling, completely hiding the second banker from my mainscreen while at the anvil.

The script, for some reasons, does the withdraw and then just stares at the banker

No anvil colors found
ENTERING OPENSMITH

edit: now it's working… weird.
edit1: can't find banker

only does an inventory…

Hey Ashaman I really appreciate everything you do for the community. I seem to be running into a problem in this script, It can start from bank position and manually withdraws fine. It gets to anvil and smiths my selection just fine as well, but it can't find the way back to the bank afterwards. The one banker and the window in front of him is in full view in the top left of screen but he isn't being found. There is a faded Subscribe button covering the walking spot where people are normally standing in front of that first banker's window too just so you know in case it is relevant.

ENTERING BANKING PROCEDURE
– tabBackpack.countDTM(): Counted 3 items
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 185, Y = 197}, took 62 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 185, Y = 197}, took 63 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
etc.

From: xSorrels
Script has been great.

Up to 120k+ an hour, and ran for 6+ hours. (Making Mithril Platebodies)

Until I noticed 90% of the time I stop right before VWB doors, in route to Anvil.

http://i.imgur.com/LBoTjn6.png
http://i.imgur.com/l0nfMdJ.png

Maybe there is something I can change?

Thanks in advance! (:

EDIT:

Seems to be only when using Presets.

The quicker the withdrawal, the more likely it is to get stuck.
(Tested this myself)

ALSO

Now it keeps wanting to click the second banker, resulting in not being able to see the anvil after withdrawal. ):

Need some assistance.

Manually adjusted camera after disabling SMART then re-enabling, completely hiding the second banker from my mainscreen while at the anvil.

Strange why does it walk to that random spot in bank? Is it just clicking on the floor there or what?

From: onilika
The script, for some reasons, does the withdraw and then just stares at the banker

No anvil colors found
ENTERING OPENSMITH

edit: now it's working… weird.
edit1: can't find banker

only does an inventory…

Restart everything and if it still messes show me pics

From: Suisyola
Hey Ashaman I really appreciate everything you do for the community. I seem to be running into a problem in this script, It can start from bank position and manually withdraws fine. It gets to anvil and smiths my selection just fine as well, but it can't find the way back to the bank afterwards. The one banker and the window in front of him is in full view in the top left of screen but he isn't being found. There is a faded Subscribe button covering the walking spot where people are normally standing in front of that first banker's window too just so you know in case it is relevant.

ENTERING BANKING PROCEDURE
– tabBackpack.countDTM(): Counted 3 items
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 185, Y = 197}, took 62 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 185, Y = 197}, took 63 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
etc.

Move that button out of the way!

From: Ashaman88
Strange why does it walk to that random spot in bank? Is it just clicking on the floor there or what?



Restart everything and if it still messes show me pics



Move that button out of the way!

It won't search for the banker, so I edited a furnace script of lumby in order to use the anvil :p
You really should use the minimap instead of the whole screen looking for the banker though..

From: onilika
It won't search for the banker, so I edited a furnace script of lumby in order to use the anvil :p
You really should use the minimap instead of the whole screen looking for the banker though..

It just uses the include one (which uses the minimap). Haven't run into an issue with finding blue bankers before unless they are off screen. If there is something covering the banker that might be another story

From: Ashaman88
Strange why does it walk to that random spot in bank? Is it just clicking on the floor there or what?

Ashaman, Ashaman, Ashaman. Lol.

I'm like 5 99s ahead of this script.

If only you replied when the problem was trouble. I dont remember much.

#1
The random spot, between the South doors I dont think is too random. It very well may be a Fagex bug.
http://i.imgur.com/LBoTjn6.png

This only happened when loading from presets. Ive came to find out, the quicker I click the anvil AFTER banking, the most likely I become stuck between the two.

#2
Although I remember it confusing the desired banker(Most SE Banker) with the one next to it,(2nd SE Banker) while at the anvil. Resulting in GetPOS or something failing. IDK.

I ended up completely commenting out every MainScreen adjustment after 'Manually adjusting camera after disabling SMART then re-enabling, completely hiding the second banker from my mainscreen while at the anvil.'

Im training to use your LividFarmer(60+Farming) atm, and looking forward to it.

Thanks in advance.

From: Ashaman88
Strange why does it walk to that random spot in bank? Is it just clicking on the floor there or what?



Restart everything and if it still messes show me pics



Move that button out of the way!

Even after moving the button the script can't find that banker or something after smithing a single inv. Just stands there to the left of the anvil facing the anvil. The banker is visible.

If I move the character 1 or 2 squares to the left(north) from the left(northern) side of the anvil he runs to when smithing, the script is able to find the banker. The banker is visible at the anvil but apparently not enough :\. If I could just modify this script to click a random place within that little area to the north, wait a sec for char to stop moving and then search for banker >.>.

Update: the script tends to find the banker 1/10 times or so from next to the anvil without timing out, 9/10 times from 1 square to the left(north), and 100% of the time 2 squares to the left(north). Perhaps the banker color is a tad off.

Since the banker is always in same spot why not have a debug box that we can line up so that the script can find the banker and banker-window inside. Then have the mouse click randomly in that area?

I'm getting the error of not being able to find the banker after finished smithing. There's nothing in the way, it just can't find it.
Debug:

– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 188, Y = 200}, took 187 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 188, Y = 200}, took 187 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 188, Y = 200}, took 218 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 188, Y = 200}, took 203 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 188, Y = 200}, took 203 ms
– sps.walkToPos(): result = False

From: sykonica
I'm getting the error of not being able to find the banker after finished smithing. There's nothing in the way, it just can't find it.
Debug:

– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 188, Y = 200}, took 187 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 188, Y = 200}, took 187 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 188, Y = 200}, took 218 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 188, Y = 200}, took 203 ms
– sps.walkToPos(): result = False
– TRSBankscreen.__openNPC()
– TRSBankscreen.__openNPC(): result = False
– sps.getPlayerPos(): result = {X = 188, Y = 200}, took 203 ms
– sps.walkToPos(): result = False

Having the same issue, Any other smithing scripts available?

From: Theron
Having the same issue, Any other smithing scripts available?

I really wish.

I check this thread every few days. Maybe one day Ashaman will save us :P

Still got it Asha ;)

|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
|                   AshamanSmither v3.3                     |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 1 Hour, 46 Minutes and 58 Seconds            |
| Bronze arrowheads x15's Made: 2,284Made/H: 1,281            |
| Exp Earned: 752,375              Exp/Hour: 421,969        |
|___________________________________________________________|
|___________________________________________________________|

From: The Mayor
Still got it Asha ;)

|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
|                   AshamanSmither v3.3                     |
|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=|
| Running For: 1 Hour, 46 Minutes and 58 Seconds            |
| Bronze arrowheads x15's Made: 2,284Made/H: 1,281            |
| Exp Earned: 752,375              Exp/Hour: 421,969        |
|___________________________________________________________|
|___________________________________________________________|

Impossible. How did you get this working? The script isn't detecting the banker for us. Maybe you changed the colors?

From: Suisyola
Impossible. How did you get this working? The script isn't detecting the banker for us. Maybe you changed the colors?

I didn't change anything :p I was using direct-x if that helps?

From: The Mayor
I didn't change anything :p I was using direct-x if that helps?

It always clicks on the second banker rather than the first, so after it banks, it cannot find the anvil for me. -.-

From: The Mayor
I didn't change anything :p I was using direct-x if that helps?

Awesome thanks for the update. Apparently this works great now :) Something in the API may have changed because this wasn't working a little whiles back. Just got a 5.5h runtime before I manually reset. Lost the progress report in doing so, bleh.

Thanks very much for the 70k iron bars Mayor! ;)

Thanks Ashaman for helping me smith them!



@Theron, manually adjust the screen until script runs fine. The script only adjusts screen angle on startup or if it can't find something. So you need to adjust the screen so when you're standing at the anvil you only see the 1 banker.. and work with that until it detects banker fine.

From: Suisyola
Awesome thanks for the update. Apparently this works great now :) Something in the API may have changed because this wasn't working a little whiles back. Just got a 5.5h runtime before I manually reset. Lost the progress report in doing so, bleh.

Thanks very much for the 70k iron bars Mayor! ;)

Thanks Ashaman for helping me smith them!



@Theron, manually adjust the screen until script runs fine. The script only adjusts screen angle on startup or if it can't find something. So you need to adjust the screen so when you're standing at the anvil you only see the 1 banker.. and work with that until it detects banker fine.

You mined all that iron at VEM? That would be like ~140k iron? :p

After one load it fails to go back to bank
just stands in front of the anvil :[

From: The Mayor
I didn't change anything :p I was using direct-x if that helps?

using direct x as well, graphics setup fine, doesnt work for me :(

Hey ashaman,

Could you please help me how to set it up to make mith pl8's? And how you're bank should look like, Cuz this is my 2nd time using a script from this site but i rlly dont understand how to install this one.
For my being it looks to complicated lol.. Im a noob with this script lol!

Thnx in advance mate!

From: Cyanempire
After one load it fails to go back to bank
just stands in front of the anvil :[

From: Notplayingrs
using direct x as well, graphics setup fine, doesnt work for me :(

From: Crim3mast3rz
Hey ashaman,

Could you please help me how to set it up to make mith pl8's? And how you're bank should look like, Cuz this is my 2nd time using a script from this site but i rlly dont understand how to install this one.
For my being it looks to complicated lol.. Im a noob with this script lol!

Thnx in advance mate!

Could try https://villavu.com/forum/showthread.php?t=110663&page=4&p=1329919#post1329919

Tried it out. works quite fine.