SRL Archive - Outdated / Broken

[SRL] [RS2] Varrock South PowerMiner v 8.00

by Ejjman1
————————————————————————————————————

This script is perfect for gaining lvls at low lvls through high lvls! It will mine the ores, and then drop them when they are needed to be dropped at very good human speeds. The PowerMiner will mine them until your certain amount is reached; it will then switch to a different user.

NOTICE: Script can be used by everyone of all lvls. Just make sure you edit the constants.


————————————————————————————————————
Features
————————————————————————————————————


* Mouse moves like a human to find the needed item.
* Fast miner. It will mine a full load in an average of around 2 minutes, 30 seconds.
* Great Anti-Random protection. Gambles new box, and switches if fails.
* Edited by many of our great programmers, including Sdcit.
* Perfect for getting your noob miner up to using Guildminers.



————————————————————————————————————
Instructions
————————————————————————————————————


* 1. USE RS with Low Detail, Very Bright.
* 2. Set your Screen to 32 bit TRUE color.
* 3. Set Playernames and Passwords in DeclarePlayers.
* 4. Position your chars at Varrock South mining spot, at the picture above.
* 5. Make sure the player has a pick…LOL
* 6. Color pick two colors of the ore you're mining.
* 7. Fill in the setup.
* 8. Press play! :cool:



————————————————————————————————————
Known Issues
————————————————————————————————————

*I decided to drop gas and not worry about it. If you hit it, then that is an unlucky draw. Sry for this, but I am gonna wait until someone actually gets a gas finder that is great.


————————————————————————————————————
Random Event Report
————————————————————————————————————

+----Ejjman1's PowerMiner Report----+
+--Worked for 52 Minutes, and 46 Seconds
+--Mined Approximately 621 rocks.
+--Total Approximate Xp Gained: 10867.5
+--Did 23 load[s].
+--Found gas 0 time[s].
+----Ejjman1's Powerminer Report----+

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL Randoms Report |
| www.villavu.com/forums |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Talking Random : 2 |
| Dwarfs Solved : 1 |
| OldMen Solved : 1 |
| Pickaxes Attached : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

————————————————————————————————————
General Notice
————————————————————————————————————


Use this script at your own risk. I'm NOT responsible for any Ban or Loss you might encounter using this script.

NAME : SRL PowerMiner 8.00
WRITER : Ejjman1
CATEGORY : Miner/Powerminer
DESCRIPTION : Gets a full load of ore and then drops it to get another.
AUTOCOLOR : No. Pick two colors of the rock you wish to mine.
CONTACT : [email]uncle_earljr@hotmail.com[/email]
SRL REV. : 2.01

It's good. :)

EDIT: You can use it anywhere, the picture is just the best spot.

cool i'll try it out rite now

Begin
   repeat
      TinMine;
   until(i = 27); //Change to 28 if wielding pickaxe
   DropTo(2, 28); //Change to "DropAll;" if wielding pickaxe
   i := 0;
end.

Doesn't this script only do one load? Maybe you should reformat the main loop a bit.

Add a Report to make your script Nicer.

{.Script Info:
# ScriptName  = PowerMiner
# Author      = Ejjman1
# Helper      = Un-Named
# Description = Powermines rocks
# Version     = 0.IntToStr(Version)
# Date        = 28th of April
# Comments    = Thanks to all the people that helped me
/Script Info}

{Version 0.1-Put character next to rock LOL.
 Version 0.2-Moved mouse to rock.
 Version 0.3-Added SRL
 Version 0.4-Started using FindColorSpirals
 Version 0.5-Successfully got 1 Tin Ore
 Version 0.6-Successful to get a full load
 Version 0.7-Added Constants
 Version 0.8-Added big area to mine
 Version 0.9-Added AntiRandoms protection
 Version 1.0-Drops full load to get another}

{.include SRL\SRL.scar}
{.include SRL\SRL\skill\Mining.scar}

{#############SETUP LINES 36-38, 77-78 #############}
//1.Put pick in first inventory
//2.Stand north of the tin rock
//3.Face your screen north; don't worry about the Minimap
//4.Set RS as the client
//5.Press play!}
program New;
var
   Mined, i, M, DropLoads : Integer; //Add DropLoads Variable

const //
  RockCol1 = 4484245; //9079701 for tin, 4484245 for copper
  RockCol2 = 4351888; //9211287 for tin, 4351888 for copper
  Total = 27; //28 if wielding pickaxe

procedure LoadBMPS;
Begin
   M := BitmapFromString(34, 15, 'z78DAED94C10AC4200C447F49' +
       '0F5BF1A8B1FBFF9FB4AD23346E08B896B2293487A1A473C873A2C' +
       'E3D65BD4A2C2B65E8198F1D164A4414FCCB67B7CC79ACB140B544' +
       '1ACBE2C985BBB0402585CCA5A4F22682DADC3139B9C68242523C2' +
       'FCE28559D24AD6EF754A543CFDF177C43354FCB4E4C884E770295' +
       '54DD6446DA4E26FAB2F973F5E76FFF15775FBB479C85A726FB9DB' +
       'FCEECC34ED1FA3597D68F47FFBF2CE37D4CCE770C147764E13B36' +
       '4E618705D5BDA234FF02F09BFEAB47BE6373FDEEAFC8653C9DA72' +
       'CD407D61972E2');
end;


procedure tinmine;
Begin
   SetupSRLMining;
   SetupSRL;
   FindNormalRandoms;
   If(FindColorSpiralTolerance(x, y, RockCol1, 193, 55, 502, 329, 5))or
   (FindColorSpiralTolerance(x, y, RockCol2, 193, 55, 502, 329, 5))then
   Begin
      MMouse(x, y, 2, 2);
      wait(200);
      If(IsUpText('Mine'))then
      Begin
         Mouse(x, y, 2, 2, True);
         wait(1000+random(4000));
         Mined := Mined + 1
         i := i + 1;
      End;
   End;
End;

procedure ProgressReport;
begin
  Writeln('<::>--ejjman1''s PowerMiner Report--<::>');
  Writeln('+--Worked For : '+ ScriptTime2(2))//Returns Time It Ran For
  Writeln('+--Mined/Dropped : '+IntToStr(DropLoads)+' times');//How Many LoadsDone?
  Writeln('+--Tin Xp Gained : '+FloatToStr(i  * 17.5))//Xp Gained. 17.5 per Rock
  Writeln('<::>--------------------------------<::>');
end;

Begin
   repeat
      TinMine;
   until(i = 27); //Change to 28 if wielding pickaxe
   DropTo(2, 28); //Change to "DropAll;" if wielding pickaxe
   DropLoads:= DropLoads + 1//Ea Time it drops a load, loads done add one
   i := 0;
end.

//I put comments in.

Further questions plz ask. Only trying to help, you don't need to like it or anything..

OK, I'll update my Powerminer here in a second.

From: WhiteShadow

Begin
   repeat
      TinMine;
   until(i = 27); //Change to 28 if wielding pickaxe
   DropTo(2, 28); //Change to "DropAll;" if wielding pickaxe
   i := 0;
end.

Doesn't this script only do one load? Maybe you should reformat the main loop a bit.

Add a Report to make your script Nicer.

{.Script Info:
# ScriptName  = PowerMiner
# Author      = Ejjman1
# Helper      = Un-Named
# Description = Powermines rocks
# Version     = 0.IntToStr(Version)
# Date        = 28th of April
# Comments    = Thanks to all the people that helped me
/Script Info}

{Version 0.1-Put character next to rock LOL.
 Version 0.2-Moved mouse to rock.
 Version 0.3-Added SRL
 Version 0.4-Started using FindColorSpirals
 Version 0.5-Successfully got 1 Tin Ore
 Version 0.6-Successful to get a full load
 Version 0.7-Added Constants
 Version 0.8-Added big area to mine
 Version 0.9-Added AntiRandoms protection
 Version 1.0-Drops full load to get another}

{.include SRL\SRL.scar}
{.include SRL\SRL\skill\Mining.scar}

{#############SETUP LINES 36-38, 77-78 #############}
//1.Put pick in first inventory
//2.Stand north of the tin rock
//3.Face your screen north; don't worry about the Minimap
//4.Set RS as the client
//5.Press play!}
program New;
var
   Mined, i, M, DropLoads : Integer; //Add DropLoads Variable

const //
  RockCol1 = 4484245; //9079701 for tin, 4484245 for copper
  RockCol2 = 4351888; //9211287 for tin, 4351888 for copper
  Total = 27; //28 if wielding pickaxe

procedure LoadBMPS;
Begin
   M := BitmapFromString(34, 15, 'z78DAED94C10AC4200C447F49' +
       '0F5BF1A8B1FBFF9FB4AD23346E08B896B2293487A1A473C873A2C' +
       'E3D65BD4A2C2B65E8198F1D164A4414FCCB67B7CC79ACB140B544' +
       '1ACBE2C985BBB0402585CCA5A4F22682DADC3139B9C68242523C2' +
       'FCE28559D24AD6EF754A543CFDF177C43354FCB4E4C884E770295' +
       '54DD6446DA4E26FAB2F973F5E76FFF15775FBB479C85A726FB9DB' +
       'FCEECC34ED1FA3597D68F47FFBF2CE37D4CCE770C147764E13B36' +
       '4E618705D5BDA234FF02F09BFEAB47BE6373FDEEAFC8653C9DA72' +
       'CD407D61972E2');
end;


procedure tinmine;
Begin
   SetupSRLMining;
   SetupSRL;
   FindNormalRandoms;
   If(FindColorSpiralTolerance(x, y, RockCol1, 193, 55, 502, 329, 5))or
   (FindColorSpiralTolerance(x, y, RockCol2, 193, 55, 502, 329, 5))then
   Begin
      MMouse(x, y, 2, 2);
      wait(200);
      If(IsUpText('Mine'))then
      Begin
         Mouse(x, y, 2, 2, True);
         wait(1000+random(4000));
         Mined := Mined + 1
         i := i + 1;
      End;
   End;
End;

procedure ProgressReport;
begin
  Writeln('<::>--ejjman1''s PowerMiner Report--<::>');
  Writeln('+--Worked For : '+ ScriptTime2(2))//Returns Time It Ran For
  Writeln('+--Mined/Dropped : '+IntToStr(DropLoads)+' times');//How Many LoadsDone?
  Writeln('+--Tin Xp Gained : '+FloatToStr(i  * 17.5))//Xp Gained. 17.5 per Rock
  Writeln('<::>--------------------------------<::>');
end;

Begin
   repeat
      TinMine;
   until(i = 27); //Change to 28 if wielding pickaxe
   DropTo(2, 28); //Change to "DropAll;" if wielding pickaxe
   DropLoads:= DropLoads + 1//Ea Time it drops a load, loads done add one
   i := 0;
end.

//I put comments in.

Further questions plz ask. Only trying to help, you don't need to like it or anything..

I've helped him alot on msn with this and he's fiddled with it. ;)

From: The Un-Named
I've helped him alot on msn with this and he's fiddled with it. ;)

Oop, caused you time then. :p

I have the SRL Library working( I think I did it right),but a random event killed me. Any ideas?

it happens sometimes i guess the randoms need to be updated a little more and ideas would be to help update the randoms :D

Dang it! Cuch!, I'll work with it right away.

I'm gonna look for ideas on other things that contain antirandom protection. I'll fix this up right away, and it will work like a charm.

Thanks, I know I'm just a leecher but after get 86 fishing legit this is a nice change of pace =P. Anyway I've been using it for an hour now and it's talked to 6 random events and aquired 160gp so I guess my events were very random. Anyway I'm going out now I hope it'll continue doing what it's doing.

You've used my script for an hour?!?!?

No, sorry I was mistaken. After I died on yours I switched to a different miner. I could go get the name if you want it. I tried yours again and after 1 full load it stopped working.

Chuch, can you please write down that autominer you used? I have been using simple wishes one. It doesn't work that well for me. As I keep getting this error. I use SS12.txt version 1.8 the newest one.
[Runtime Error] : Out Of String Range in line 158 in script C:Program Files/SCAR 2.03includes/SSI2.txt
If anyone can tell me what to do so I stop getting that error after 5-10 minutes, I would greatly appreciate it or can someone please give me a link to a really good autominer.

Leader, I am currently doing many many things to fix this up. I have currently made a better progress report. I am now just working on making him drop the ore and do another load. It's more complicated than it looks.

Nice to see, your updating, and that you used my progress report. :p

Maybe you should change

Writeln('+--Mined/Dropped Approximately : '+IntToStr(DropLoads)+' times');

to

Writeln('+--Mined/Dropped : '+IntToStr(DropLoads)+' loads');

Some people may be confused by times, so make it loads. And don't put approx, number of loads is 100 % accurate.

This is the one I'm currently using. It's not as up to date as some, it's not even using SRL, but it's the best one I could get a hold of. It gets held up on Boxes and Certs. Anyway here it is. Just hit go and it'll do the rest.

http://www.villavu.com/forums/showthread.php?t=1044

agh! guys, please keep faith in me. I've been updating all day, and I'm updating a very decent version this time. It works MUCH MUCH better if you wield pick, but you don't have to. Also, I tested it and only doesn't do like 2 random events. It's pretty decent.

I didn't post that because I lost faith. That's the miner I've been using for a few days now, I've been checking back on your thread often from th is computer while my other is mining. I look forward to testing your revised edition. I'll be sure to leave feedback and progress reports if your miner has them.

Yeah but can anyone help me with that error? How do I stop getting this error on solemn wishes miner?
[Runtime Error] : Out Of String Range in line 158 in script C:Program Files/SCAR 2.03includes/SSI2.txt

Edited*-~-

Sure
http://www.moparisthebest.com/smf/index.php?action=dlattach;topic=262.0;attach=57

Hey ejjman1 it would be cool if you make it just keep mining until it finishes one ore and then goes to the next ore. Right now it just keeps clicking on the ores, as there is a certain amount of seconds before it clicks again. One more thing dude, can you please make it drop the ores faster. It takes forever.

Hey do you guys have aim?

Hey guys. I've lately been working on a faster drop system, and working on telling the script that there is a full load, and then it now needs to drop it. If any1 has suggestions, Add me on MSN at [email]uncle_earljr@hotmail.com[/email]

From: WhiteShadow
Nice to see, your updating, and that you used my progress report. :p

Maybe you should change

Writeln('+--Mined/Dropped Approximately : '+IntToStr(DropLoads)+' times');

to

Writeln('+--Mined/Dropped : '+IntToStr(DropLoads)+' loads');

Some people may be confused by times, so make it loads. And don't put approx, number of loads is 100 % accurate.

Not always 100% accurate.

EDIT: Can leader and chuch! please go to the appropiate threads as this thread is not solem's powerminer thread.

Thanks Un-Named. I'm still working on the drop because it sometimes misses the ores…If some1 could help me with a good drop procedure that doesn't miss ores, that would be awesome.

I got your PM and it's working great right now. Its either using a great anti-random or I haven't encountered any(most likely the former as you always encounter randoms). I do have one question though. In your pic you show the tin rocks that are like this

*
* *
—*

Whenever I start it there it moves a few feet to the east to the tin rocks like this

–*
-*
Is this supposed to happen or is this something wrong on my part?

LOL, actually, I don't think it matters, lol. It does it for me too, and it still works great! Cuch!, could you post your progress reports if you get some? Thanks.

One question. Is there any way to make it leave my first 4 inventory slots alone? I usually wield 1 pick and have four in my inventory(gives it a little bit more time to auto.

*edit* I just can't get this to work. It clicks one rock then spasticly begins clicking others, never staying on any one rock.

Example: It'll click a tin rock then right away click a copper rock, I only put tin colors in so I don't know what's going on. I never get any ores because it doesn't give my guy enough time to mine them.

PS. It lags the client horribly, does that happen to you?

Lag? Never to me. Suggestion: Restart computer and make sure SRL is the latest version.
Not enough time? Mining Lvl? What pick are you using? PM this information to me and I'll edit it so it will stay and mine them.
4Slots? I edited for you. I'll PM you it right away.

Anymore questions? Please ask me then, and I'll be glad to answer them as best as I can.

EDIT: I'm updating more info in right now. MAKE SURE YOU DO THE SETUP!

EDIT2: OK, I just updated it to what I'm using. I'll test out tin and see if it still does that.

I'm 48 mining and am using bronze picks(throw away account). It'll start out great, click the rock, but then it'll just start clicking every rock(now it stays still atleast). Also it continually clicks, this causes in game lag(takes a long time to switch from rock to rock) is it possible to make it click once, detect rock color change and move on to the next rock? I'm not a scripter so I don't know if what I'm saying is impossible, but other than the things I said this script is amazing.

OK chuch!, here is the lowdown…

I can make it so it will wait a certain amount of seconds between each click, letting you have the time to actually mine it. Also, I tested tin, and it is a little worse than, copper, so I suggest you use copper; its same exp, and it works better. I have tested it, so I think you'll do great. Did you get my PM of having the 4 picks? If so, did it work? OK, now the last thing is…How long do you think it will take you to mine a rock using a bronze pick, between this amount of seconds, and this amount? You tell me, I'll edit, and then I'll send you what I've edited…

Thanks for your great support on my script.
-Ejjman1

To get the ore probably 8-9 seconds. As for the picks, it's working great. And suppot =P I figured you'd get annoyed lol.

*edit* Is the miner supposed to pick up pick heads that fly off? Mine just flew off and it didn't pick it up. It doesn't matter though since I have 5 picks on me.

Ha, ya right! Feedback is my favorite thing…as for graphical updates on RS, those are different…

procedure OreMine;
Begin
   If(FindColorSpiralTolerance(x, y, RockCol1, 6, 7, 511, 336, 5))or
   (FindColorSpiralTolerance(x, y, RockCol2, 6, 7, 511, 336, 5))then
   Begin
      MMouse(x, y, 2, 2);
      If(IsUpText('Mine'))then
      Begin
         Mouse(x, y, 2, 2, True);
         AntiRandoms;
         wait(1000+random(2000)); //Waits between 1 and 2 seconds per click
      End;
   End;
End;

Copy and paste this over the wait.

 wait(8000+random(9000)); //Waits between 8 and 9 seconds per click

EDIT: Sry about the pickhead…It only works if you wield the pick =/ SRY…If you're using bronze pickaxe, why not just wield it for now lol?

Thanks I'll go do that right now, and now that I know how to do it I can adjust it to the perfect timing. This is becoming my favorite miner. I just have to get a few randoms and see how it holds up.

Yea, the only problem is SRL hasn't come out with like, sandwhich lady, frogs(I think), and others that are rare though…So have fun, and report =)

<::>–Ejjman1's PowerMiner Report–<::>
+–Worked for 19 Minutes, and 0 Seconds .
+–Mined Approximately 108 rocks.
+–Total Approximate Xp Gained : 1890
+–The PowerMiner is working great!
<::>–Ejjman1's Powerminer Report–<::>
[Runtime Error] : Out Of Range in lins.scar e 1117 in script C:\Program Files\SCAR 2.03\includes\srl\srl\core\AntiRandom

First progress report, I think that the error happend because of a mysterious old man, I had 2 boxes in my inventory when I logged back in. I

Agh! Stupid Newboxes…SRL should start working on that right away.

EDIT: I was gonna mention something about how slow you have it, but I forgot you have about 8-9 seconds on each click…Well did you see how fast it goes? :P, that takes awhile but I finally got it.

EDIT2: I'm gonna run the script, I've just updated SRL 1.1 even though I already had, but friend told me to cuz I didn't do right or something, and I think all people should re-update it even if you think u have already. Have fun with my script, and I'll continue to update…Post your reports!

ok i started the script, then it worked fine for the first load(it mined one load) then it droped the ores.. then it staretd mining again so i predicted it was wroking fine. therfore i wentto watch family guy for liek 15 mins then i come bac and i was at fally square..(i started at vrrk east mine) lol.. how did it find its way from vrrk east mine to fally square.

You may have gottent he bread lady, and she teleported you. I had it running for like an hour and it did its thing, it had to log off a few times cuz I got
a.)The Frogs
b.)A Box
c.)A maze
d.)A bootcamp guy

other than those(which I think ccan't be scripted to be fixed it's owrking great).

Torrent….You should probably try again, and yes, it must've been the sandwich lady lol.

Chuch!, I'm working with more antirandoms atm, and adding players. You guys sit tight and use what you have, and hope for no randoms =)

ill try it out again now.. :) this time ill watch the bot run lol.. iill watch tv and watch the bot run at same tiem to see if the lady coems up again..:eek:

Yes, If you want, wait for about 10 minutes, and I'm adding player array so it'll work better.

lol The boxes strike again.
<::>–Ejjman1's PowerMiner Report–<::>
+–Worked for 19 Minutes, and 44 Seconds .
+–Mined Approximately 135 rocks.
+–Total Approximate Xp Gained : 2362.5
+–The PowerMiner is working great!
<::>–Ejjman1's Powerminer Report–<::>
[Runtime Error] : Out Of Range in line 1117 in script C:\Program Files\SCAR 2.03\includes\srl\srl\core\AntiRandoms.scar

Updated, use player arrays :D. You should try it, and then make it mine a bunch. It will now actually gamble the new boxes I think. If it does for you, then post so I can say it works instead of (Testing…)

Edit. I understand player arrays, but it mines one load walks a bout 100yds north and then sits there. What's going on?

If anyone needs a great power miner I 100% reccomend this. It works great. It mines the load, drops it. Fixes your picks when they fly off, you can alter it to leave the first 4 slots untouched when it's dropping ores(more picks=longer runtime). It'll run from the rock gollem/chicken and then run back. You can set your click speed to match your mining level which equals greater exp at higher levels. It talks to 90% of randoms(the pirate, the highwayman, the dwarf etc etc. When you have a box it'll try it(I've never seen it, but I always have 2 boxes when it logs out so I guess it works) and then log you out. This is easilly the best powerminer out there.

100% efficiency.

Proof box check/gambler is working:
<::>–Ejjman1's Powerminer Report–<::>
Random Event Report:
Box Missed

Well it works great for you guys, but it doesn't do anything for me. After I load it, it just lags for a few seconds and after lagging doesn't do anything. Does it only work for tin ores?

I use for copper. Try these following things.

1.)32 bit TRUE color res
2.)Low detail game
3.)Very Bright screen
4.)input your own colors of 2 rocks you wish to mine(2 diff colors)
5.)Change this to a slower speed:
{~~~~~~~~~~OreMine~~~~~~~~~~}
procedure OreMine;
Begin
If(FindColorSpiralTolerance(x, y, RockCol1, 6, 7, 511, 336, 5))or
(FindColorSpiralTolerance(x, y, RockCol2, 6, 7, 511, 336, 5))then
Begin
MMouse(x, y, 2, 2);
If(IsUpText('Mine'))then
Begin
Mouse(x, y, 2, 2, True);
AntiRandoms;
wait(4000+random(5000)); //Waits between 4 and 5 seconds per click
End;
End;
End;
{~~~~~~~~~~OreMine~~~~~~~~~~}

(notice I have mine at 4000-5000. Default is 1000-2000.)

That's all that I can suggest, it works great for me.

One last thing. This is the setting to have it keep the first 4 lines of inventory.
{~~~~~~~~~~DropOres~~~~~~~~~~}
procedure DropOres;
Begin
BenMouse:=False;
if(EquipPick=True)then
DropToPosition(5, 13)
FindNormalRandoms;
DropToPosition(14, 28)
if(EquipPick=False)then
Begin
DropToPosition(5, 13)
FindNormalRandoms;
DropToPosition(14, 28)
End;
BenMouse:=True
End;
{~~~~~~~~~~DropOres~~~~~~~~~~}

Just paste that over the previous commands.


*edit*… I don't know how to paste is in true form(with spaces etc). I've sen it done but have no clue how to do it, if anyone could explain it to I'd be thankful. PS: don't use these commands untill they're fixed, I doubt it'd work w/o the spaces.

Don't have to worry about spacing…

Chuch!, I didn't edit the 8-9 seconds under the download script LOL! Just under yours so don't wory about people having to switch it back to a certain amount of time. Thanks for the support Chuch!, and I'll work on helping with the frog randoms.

Thanks works better now.

np, post ur progress reports

Random Event Report:
<::>–Ejjman1's PowerMiner Report–<::>
+–Worked for 8 Minutes, and 54 Seconds .
+–Mined Approximately 54 rocks.
+–Total Approximate Xp Gained : 945
+–The PowerMiner is working great!

<::>–Ejjman1's Powerminer Report–<::>
Random Event Report:
Your Name has been spotted on the screen
<::>–Ejjman1's PowerMiner Report–<::>
+–Worked for 13 Minutes, and 47 Seconds .
+–Mined Approximately 81 rocks.
+–Total Approximate Xp Gained : 1417.5
+–The PowerMiner is working great!
<::>–Ejjman1's Powerminer Report–<::>

Random Event Report:
Talked to 1 Random event.
<::>–Ejjman1's PowerMiner Report–<::>
+–Worked for 18 Minutes, and 41 Seconds .
+–Mined Approximately 108 rocks.
+–Total Approximate Xp Gained : 1890
+–The PowerMiner is working great!
<::>–Ejjman1's Powerminer Report–<::>

Random Event Report:
Talked to 1 Random event.
<::>–Ejjman1's PowerMiner Report–<::>
+–Worked for 23 Minutes, and 19 Seconds .
+–Mined Approximately 135 rocks.
+–Total Approximate Xp Gained : 2362.5
+–The PowerMiner is working great!
<::>–Ejjman1's Powerminer Report–<::>

It doesn't do the randoms properly. It failed the frog princess random, but I don't know if you have that on there. Also when I was fighting against a swarm, it ran too far north and didn't go back to where I was. Also it doesn't work good with the random events that talk to you, I just had the banker one and it didn't do anything so my pickaxes turned into notes.

Frog princess is a hard random becuase of how many there are, it is possible though. The certer is impossible for leechers(the SRL members probably have one though). And for the swarm, my guy always runs the perfect distance, and then runs back, be sure that your screen is directly north.

Yeah it is facing north, but doesn't go back. I have had some random box events, its good that it logs out after the try to solve it. The certer? After I mine and drop the ores it keeps the cursor on the dropped ores instead of mining again. Please fix that.

I think you should try fixing the random gas too, it doesn't work that well. I will try to find some scripts that you can look at for a reference. Also after like 3 minutes I keep logging out, do you know the cause?

There is a edit button, and about the randoms, it affects everyone using any script that uses SRL as an include.

<::>–Ejjman1's PowerMiner Report–<::>
+–Worked for 47 Minutes, and 29 Seconds .
+–Mined Approximately 351 rocks.
+–Total Approximate Xp Gained : 6142.5
+–The PowerMiner is working great!
<::>–Ejjman1's Powerminer Report–<::>
Random Event Report:
Fought 1 Time.
Talked to 1 Random event.
Your Name has been spotted on the screen
Your Name has been spotted on the screen

I turned that on during my shower/breakfast. It works great for me. The "your name has been spotted on the screen" is when the frog princess comes. Perhaps a bitmap of the crown could work? I don't know much about scripts but I was reading about bitmaps and dmfs(?). I don't know though, that's the only random it doesn't do anything for.

SRL makes the antirandoms, not him.

Oh I didn't know that.

Do you keep your chat on? Also don't you log off after a while, when I use the this powerminer I log off after 3-5 minutes. I don't know why, but I just do. Also what about the mining and dropping? Sometimes after it drops the ores, it doesn't go back to mining and keeps the mouse on the ores and stays there.

3-5 Minute logging…Did you set the total ore to above how many ou can get in 3-5 minutes?
Ore over mouse…I'm sry, it does that. I haven't seen it do it under copper ore.

Keep trying, and see if you can get it to work. Change the time to mine it to higher if using lower lvl picks.

EDIT: I've updated again, and I think the findgas is even better. Version 1.8

Two days mining(about 20 total hours). 55 mining. South east of varrock on the copper rocks far south. Perfect miner. 5 more levels. I'll be a level 3 in the mining guild =P.

Wow! 20 hours straight? Post a report! That's awesome cuch!

But it would be cool if you could make it have a auto login so if it messes up it can go back to what it was doing.

Lol you just posted 1 minute before me.

I've never had a script run for more than 2 hours.

From: chuch!
Two days mining(about 20 total hours). 55 mining. South east of varrock on the copper rocks far south. Perfect miner. 5 more levels. I'll be a level 3 in the mining guild =P.

thats the stupidest thing iv ever heard a lvl 3 in the mining guild, way to make perfect scripts very detectable…. :( lmao you'll be reported and banned by legit players in acouple days…

ive seen many legit level 3 players in the mining guild XD :p just need to make sure you play legitly 99.99999% of the time XD

From: chuch!
Frog princess is a hard random becuase of how many there are, it is possible though. The certer is impossible for leechers(the SRL members probably have one though). And for the swarm, my guy always runs the perfect distance, and then runs back, be sure that your screen is directly north.

the certer random is already included in SRL if its not handling your talking randoms your not setting up your player nickname properly. You MUST Set the player nick name or it wont work.

From: Dankness
thats the stupidest thing iv ever heard a lvl 3 in the mining guild, way to make perfect scripts very detectable…. :( lmao you'll be reported and banned by legit players in acouple days…

lol. I won't be autoing in the mining guild. I plan to get this guy to 70ish mining then start mining coal legit. I have an 86 fisher but fishing is getting boring.

@ejjman1. Something happend with the script since your new update. He runs a little too far North and then doesn't run back. He used to stop at about the wall of varrock now he goes well past the wall. Anyway script is running great.

@the 20 hours. It wasn't in one script it was over a period of 2 days. 2 hours here. 6 hours once. 40 minutes here, etc etc.

@dankess. The nick, you mean this.
Players[1].Name :='';
Players[1].Pass :='';
Players[1].Nick :='';<———-This one? I don't know what to put in there.
Players[1].Loc :='Varrock';
Players[1].Active:=True;

Will this script work in rimmington at the mine? As I have been mining there, I just died a while ago and appeared back in Varrock. I must have gotten into a fight, well thanks anyway.

From: Dankness
the certer random is already included in SRL if its not handling your talking randoms your not setting up your player nickname properly. You MUST Set the player nick name or it wont work.

What do you put the nickname to? Please tell me what to do.

You set it to a condensed version fo your name for example:

SDcit

the nick would be like

Dci

You just take a part of your name, 3-4 letters?

So if my account name was I Are Mining, which it's not, I promise. Could I do something like "Are" or "ini" or "inin". If it has 3 spaces I don't know what to do. And once again that's not my account.

From: chuch!
So if my account name was I Are Mining, which it's not, I promise. Could I do something like "Are" or "ini" or "inin". If it has 3 spaces I don't know what to do. And once again that's not my account.

use 3 or 4 letters that are in your name, personally i suggest 3 things when picking it

–> NO Zero's
–> Something that people don't say commonly
–> LowerCase letters from your name are better?

I find if you use Zero's it won't work properly since runescape updated the font and ade the zero and O look diifferent. Find a part of your name that people arent gonna say in normal talk because it could cause it to look for randoms if they do. Not sure about hte lowercase but i always thought the lowercase letters workd' better.

From the manual… *sigh*

The Player Array

Main philosophy behind SRL is to play with many player, not with one! These players are all lined up, they play for a short time, and then they log out to make way for the next player. This approach has a number of advantages.

- It is much less obvious you are autoing.
- Better profite because scripts generally run much longer.
- the number of randoms your Player encounters dramatically goes down.

The Player Array is easy to set up, but you will need to know a bit about Arrays to fully comprehend it.

HowManyPlayers :=6;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer:=0;

Players[0].Name :='yourname';
Players[0].Pass :='yourpass';
Players[0].Nick :='urna';
Players[0].Loc :='yourloc';
Players[0].Skill:='yourskill';
Players[0].Active:=True;

You set HowManyPlayers. It determines the amount of players you have.
You call NumberOfPlayers(HowManyPlayers); to set the array length and initialize the StartPlayer.
The global CurrentPlayer contains the ArrayIndex. Players[CurrentPlayer] is the one playing.


You set the Players Name, Pass and Nick. The first two are obvious, the third one needs some explanation.
SRL checks for randoms by scanning the yellow text from the mainscreen. If you encounter a Random, your name always appears on the mainscreen. That is what we scan for in Nick. Nick doesnt need your whole name. Take two, three or four letters from it and put it in Nick. Example: if your runescape is Qwertyuiop, good Nicks would be: tyu, erty, uio or iop. Note however that nick should NOT contain the First Letter Of Your RuneScapeName, Since These Are Always capitalised.

loc is used to store the Players location. You will need to set this location manually. If, for instance, you are sure you are at location Brumlidge, you set Players[CurrentPlayer].loc :='Brumlidge'; You can now safely log out.

skill is an optional parameter allowing you to assign different tasks to each Player. For mining for instance, you might set this to 'copper' for Player1 and 'iron' for Player2.

active determines the Player state. If active is True, then our Player is fine and standing at a known place in our script. If active is False, this means that our Player has unexpectedly logged out. active is set in the procedure NextPlayer(active; Boolean), Warning: if you set active to False at script startup, the Player will be inactive.

Thanks, Fawk, you're a great help.

EDIT: I gotta make around 6 guildminers, so I've decided to start increasing this and helping SRL with as many things as possible.

EDIT2: *NOTE!* Does any1 know a stinking gasminer that works good????? All the ones I have tried do not work.

Begin
gascolors(gx, gy);
Mouse(x, y, 2, 2, True);
gascolors(x, y);
AntiRandoms;
wait(1000+random(2000)); //Waits between 2 and 3 seconds per click
AntiRandoms;

thats the one that doesn't work that I recently tried. gx, gy….Can any1 please please give me a much better one?

This sucks I keep getting banned. I checked my messages and Jagex said,
"As a result of this recent offence, and in light of your previous record, your account has been permanently banned."

So I guess they knew that, because of my ip address.

Is there a proxy server that can load runescape?I have tried many and they have failed.

Iamnewguy.com
Unblockthis.com
Proxy.cjb.net

Also before I got banned, I noticed that it didn't drop the ores when there wasn't a pick equiped. Meaning when equippick=false.

Lol, ya, I'm fixing those begin-end; statements right now…

<::>–Ejjman1's Powerminer Report–<::>
Random Event Report:
<::>–Ejjman1's PowerMiner Report–<::>
+–Worked for 1 Hours, 47 Minutes, and 29 Seconds .
+–Mined Approximately 648 rocks.
+–Total Approximate Xp Gained : 11340
+–The PowerMiner is working great!
+–Random Event Report
Fought 6 Time.
Talked to 3 Random event.
<::>–Ejjman1's Powerminer Report–<::>
Random Event Report:
Box Missed

My level 3 is 57 mining now =P

W00t! That's awesome! Do you happen to know if you dodged any gas? The gas procedure sucks that I have…chuch!, download the latest version for more improvement.

wow it works very great until thrs a Rock gas thingy , also i was wondering the Frog function works now
here my report :)

<::>–Ejjman1's PowerMiner Report–<::>
+–Worked for 25 Minutes, and 4 Seconds .
+–Mined Approximately 108 rocks.
+–Total Approximate Xp Gained : 1890
+–The PowerMiner is working great!
+–Random Event Report
+–Fought 1 Time.
<::>–Ejjman1's Powerminer Report–<::>

FindGas(fx, fy: integer);

Use it Ejjman1

FindGas(x, y);

Add it to your mining procedure.

Hey what do the player arrays do? When I put in some accounts it doesn't log off and go onto those accounts and I put it as active. When will it log off and go on that account and start mining because the character logged out last night after 10 minutes and didn't do anything, but the script was still running and nothing was happening.

cool, works okay

OK guys…I am testing another gasfinder…Wish me luck, and if it works, another great version will be released in which you guys can then dodge gas and run for even longer!

The gas works okay. When it sees the gas, it pops up some error on the screen saying that their isn't a pickaxe that you can use. What you need to fix is the prayer arrays I think, as they don't do anything. After one account logs off nothing else happens and the script still runs. Isn't it supposed to switch accounts and start mining on that account?

Great! OK, I'll mess with them.

Updated version!

That, you can find under SRL…Now about the typing Username…SET RS AS THE CLIENT LOL!

Where do you set Rs as the client?

Also the randoms aren't working for me anymore, as I have just died. The script doesn't stay running for more than 30 minutes like it used to.

You used to have the turn chat off code on your script before.

From: leader
Where do you set Rs as the client?

Also the randoms aren't working for me anymore, as I have just died. The script doesn't stay running for more than 30 minutes like it used to.

You used to have the turn chat off code on your script before.

RS Client…See the little circle with the crosshairs? Drag and drop that over the RS client.
Randoms…Um…I dunno, I'll find out.
I'll add the turn chat off here in a second, I lost the code for it so I'm trying to find it.

Stay calm, and I'm trying to update it in around 10 minutes.

EDIT: Updated again guys…It can only get better and better from here!

Oh I always drag that crosshair over Runescape. But your script doesn't enter the username and password on Runescape it just enters it on the script.

But can you please tell me where the login procedure is?

Login Procedure, yyou can find that under SRL manual. Just look under the SRL files

I don't know dude the login still isn't working. Okay I will tell you what I do.

1) Open up your Miner
2)Get the Colors For Runescape
3) Drag the Crosshair over Runescape
4) Run your miner

Then it clicks on existing user, username, password, and login. But doesn't type the username or password where it is supposed to. Maybe you should try it with your account. Also can you pleae tell me how to make it wait longer before clicking on the ore again as I cannot find the place where it last was. For some reason it isn't doing the gas random anymore. It doesn't show the error on the screen when it tries to mine that rock which has the gas on it. But maybe that is just me, as I am playing around with the script to make it mine slower.

From: leader
I don't know dude the login still isn't working. Okay I will tell you what I do.

1) Open up your Miner
2)Get the Colors For Runescape
3) Drag the Crosshair over Runescape
4) Run your miner

Then it clicks on existing user, username, password, and login. But doesn't type the username or password where it is supposed to. Maybe you should try it with your account. Also can you pleae tell me how to make it wait longer before clicking on the ore again as I cannot find the place where it last was. For some reason it isn't doing the gas random anymore. It doesn't show the error on the screen when it tries to mine that rock which has the gas on it. But maybe that is just me, as I am playing around with the script to make it mine slower.

mee to i no need to adjust the ore clicking thing but hat i dont know which one it is :P

You should add this

ActivateClient; 

That should activate rs window before entering username and pass :]

Hey c0de where do I add that? I have tried to figure it out by myself but it hasn't done anything. It goes in the main loop right?

{~~~~~~~~~~MainLoop~~~~~~~~~~}
Begin
   SetupSRLMining;
   SetupSRL;
   Setup;
   DeclarePlayers;
   CurrentPlayer:=StartPlayer;
   LoginPlayer;
   BenMouse:=True;
   MouseSpeed:=15;
   FindPickHeadColor;
   SetChat('Friends',1);
   SetChat('Off',2);
   SetChat('Off',3);
   RepeatIt;
   if (not (Loggedin)) then  NextPlayer(False);
End.
{~~~~~~~~~~MainLoop~~~~~~~~~~}

At the begining
Above SetupSRLMining;

I tried that, it still doesn't do anything. Can you please download the script and try it for yourself?

umm ok :] i'll edit this post as soon as i figure out the problem :o

Edit: works great for me, no bugs, except few things i have to pm ejman to fix =) (the pickuse thing is made wrong)

Edit: i'll be damn, jagex didn't let my noob mine gas rock :S it said i didn't have pick lol! :D is this in new update ?

Woah, if some1 could tell me more about this update, that would be great. Sounds like SRL is getting a gas break.

From: c0de
umm ok :] i'll edit this post as soon as i figure out the problem :o

Edit: works great for me, no bugs, except few things i have to pm ejman to fix =) (the pickuse thing is made wrong)

Edit: i'll be damn, jagex didn't let my noob mine gas rock :S it said i didn't have pick lol! :D is this in new update ?

Probably is as I had downloaded the lastest update.
Okay it let me login now. Thanks for the help. I think I played around too much with it, and that is why it didn't work. But for some reason the login only works when I open the script from here and not save it.

ok well i cant seem to work or use ur automining script, it sounds pretty awesome but i dont know what program to even run the script on:(


im using scar as my script running program as of now
and i just started learning about this earlier today

download scar for the script.. http://dylock.net/scar/ is the website.. read through tut island and ask people how to work it ;)

The genie random doesn't work. It clicks on the lamp and then doesn't nothing.

Ur right…genie lamps don't work…

The lamp dosen't work because you haven't set the lamp skill in SRL.scar.

Which one do I put it in? The srl.scar doesn't have it.

For most comp's it's C:\Program Files\Scar 2.03\includes\SRL\SRL\core\Antirandoms.scar

I dunno I just typed that from memory lol, but you get the point. Thanks for sticking by me.

Anytime. I thought it was there, but it only shows all the skills it doesn't show a main one that you pick. I don't think the gas random works anymore either. I never see the error come up anymore.
Does the genie random work for you? I still don't get what to do to make it work. I have had the random 3 times now and have had to pick the skill myself. Thank you for helping me.

From: leader
Anytime. I thought it was there, but it only shows all the skills it doesn't show a main one that you pick. I don't think the gas random works anymore either. I never see the error come up anymore.
Does the genie random work for you? I still don't get what to do to make it work. I have had the random 3 times now and have had to pick the skill myself. Thank you for helping me.

It took me 30 seconds to change my lamp skill.

http://img140.imageshack.us/img140/8190/dotdotdot4jd.jpg

Blast! You're right…Well I'm going to work on other things, because I've heard a rumor about the new SRL version will contain a fixed lamp thing, including other great miracles :D Can't wait! In the meantime, I'll mess around with the clicking procedure and stuff.

EDIT: Yo peoplez, I'm fixing up the PowerMiner…again…and working on more human like stuff. Hold your horses as I go!

Lol okay, thanks again mate.

From: The Un-Named
It took me 30 seconds to change my lamp skill.

http://img140.imageshack.us/img140/8190/dotdotdot4jd.jpg

When I open up the srl Antirandom and go down to find Lamp. It doesn't ask for which skill I want to make it pick. It just shows all of them.

Also that image, in order to see it do I have to join that website?

Agh! Leader, the lampskills are being redone, and that will not work. I suggest you count on luck by not getting one, and wait till next SRL version comes out. Well, I'm updating right now…Just doing it now…here I go…Just wait…Just about to…Almost…Here I come…

Its okay I don't want you to keep updating it if you don't want too.

I want to because I need a good powerminer. OK, here's the updated…Hope you like it :p

Gracias me amigo

How did you get this? How did you know it was supposed to be 2?
Mouse(x, y, 2, 2, True);

Just curious, but how come the gas random error stopped coming up?

De Nada.

Now, the 2, 2 is just a random spot for the mouse to go to. It's nothing special. It just moves the mouse a little random.

OK, the gas error…Is that good or bad?

EDIT: I tested and got a new progress report, but it quit because I missed box. I did hit one successful box though, but the next one, that was in 10 minutes, missed so I logged. Come on Fawk, work your heart into updating SRL!

The old gas error that used to pop up; the old gas error was the one that used to say that you cannot use this pickaxe or something like that. It used to appear on yours whenever it clicked on the gas. Then it wouldn't let you mine the rock because of the error.

I made the forum look better by using Fawk's style, so you might find things easier.

I dunno about that, maybe Jagex realized that that just made PowerMining or mining in general lots ezier. I think the PowerMiner will still dodge the gas.

the gas dodging dosent work at all ,,, my piockaxe broke 5 times now cause it ddidnt dodged the gas ,,

From: subin
the gas dodging dosent work at all ,,, my piockaxe broke 5 times now cause it ddidnt dodged the gas ,,

Why not learn some scripting and look into why it broke?

and learn to spell while your at it :rolleyes:

Finding gas is really hard, thats one of the small problems in my private powerminer, FindGas; (SRL) does not always work, try getting some gas colours aswell. :)

meh i never got the gas thign to work.. i broke so much pix axes.. for some reason i keep getting the gas thing like every 5 mins :(

Don't worry guys, Fawki and the team will come up with a way to dodge it for now. Just bring like, 5 or 6 mith pickaxes, and then you won't have to worry about them. I'm sry for this trouble, and I'm currently looking into mainly gas right now

lol okay … i suggest instead of bring couple of pickaxes it should go to the bank and get it … casue i think JAGEX is really gonna think you are an auoter casue you have like 6 pickaxes in ur inventory ANd u keep ON breaking the pickaxe by THE GAS.

I think I've done it! I've uploaded the next version, and I'm feeling great about the gas. You must try this out, and I think we have a solution! This is the gas finder that WT-Fakawi uses himself!

EDIT: Updated with version 2! I'm going to test it out for awhile with only 1 pickaxe in my inventory.



I'm P.O'ed at Jagex for ever coming out with gas. I'm resorting to copying directly from Fakawi's words.

AWSOME great i'll also test it out.
——————
Edited ( 2hours later ): WEll the tesing was done , the problem is i coudlnt run the SCript properly casue when evr i strar it runescape lags so badly .

A problem is… it mistakes the color of the droppped ore on the ground as the rock. but it doesnt click it.

It doesnt click the copper ore on the ground because the base of the ore is way more different than the rock. I am also unable to hide the ore under my mage robes :p

Gas totally doesnt work… had two broken pickaxes… I am currently going to make a solution to this… look in the scripts suggestions section.

Agh, Ub3r, I need to know which version that was. If it's the new one, then that kinda sucks.

is the gas detecting thing fixed yet? broke liek20 pic axese of that.. :\

Yes..I'm updating right now.

I just updated. Prepare to NOT get outmined and just sit there. You'll move along in 13 seconds…Gas, I'm pretty sure that kicks ass, but I don't know.

u think it will run forl iek 3 horus non stop? without breaking a pic? ima go outside to play basketball for 3 hours so il ltry it. i only got one non broken pic axe left :\

Hope so, and I dunno. Everyone says Piv's is the best, so it might…The only thing that might log out is the randoms…Good luck, and post reports.

yeh ill psot bac a report.. :)i wish it goes well.. thats my one and only non broken rune pic axe left lol

Do you wield?

If not, you will lose pick if it falls off.

From: ejjman1
Do you wield?

If not, you will lose pick if it falls off.

dang i cant weild.. im only 39 attk :\ ill go train it up now lol i need a few k xp :D

good :p then you won't lose a head at least.

Everyone…I just wanna say that I owned that gas. :D get new version!

went great.. i got from 48-55.. it didnt stop either.. it stoped cause i got disconnection error :) so it wud have prolly kept going

Heh, that is soo awesome. Post progress reports man!

Well, it worked when i left… when i came back 7 hours later it was logged out saying it had mined 1 time :P… Well it might be due to the client update, but they never updated at that time before so i doubt it… nice coding though.

It doesn't work anymore for me. Now the script won't click on the "Click to Play" red button on the runescape screen. It just sits there. Also if I log in and then click run by the rocks it doesn't do anything either. The update must have greatly affected it. Does it work for any of you guys?

Yes…unfortunately, we'll all have to help in some way to get SRL back on its feet.

Nice script mate, I will definitely be using this!

It's not worked atm, so I'll comment back when it's fixed.

I'll try it when it's working. ;)

Me too.

OK People, I've updated it, and I'm gonna go test it out. I suggest starting logged in and it will work. Remember to fill in the setup to the correct options. Goodluck!

It works!!

0wned with a capitol zero -Racer of All

I think I got the gas! Bitmaps, rock on!

Wow, this script runs great. The only error I see is that when the inventory fills up and it starts dropping ores it sometimes misses the ore when it right clicks. Therefor it skips a couple of ores. I normally end up with about 5-10 ores left in my inventory when it finishes dropping. Though, it runs so nice and quick that there is no deficiency, even with that "problem." All it does it change the amount of ores mined compared to the 'loads.'

I havn't had a smoking rock yet though.

Runs great! Takes about 2 minutes 20 seconds per load. I'll post a progress report later, after I let it run for a while.

Thanks mucho!
~Sal

From: new girl69
The only error I see is that when the inventory fills up and it starts dropping ores it sometimes misses the ore when it right clicks.

Isnt that a good thing?
I always get "Spotted a random…" after several minutes, while there is nothing going on.

Yeah I do too. I have so many randoms when I mine and level other skills.

OK, Make sure you fill in the Player setup or else the name thing won't work. You probably aren't using the nickname right also. U put a part of your name ,3-4 letters, so that it will search for that. Make sure people won't say that sequence a lot or never.

Example:

Username: Minerdood
Password: Owningyou
Nick: erdo //People won't say this often. Some tips are choosing this is. NVR CHOOSE FIRST PART OF NAME OR WORD. Also, NVR CHOOSE 0 since of the new update.

Check out sweet progress report on first page.

From: t0tum
Isnt that a good thing?
I always get "Spotted a random…" after several minutes, while there is nothing going on.

How is missing ores a good thing? It makes it more detectable. When you drop ores playing legit, you don't just randomly miss some; then not go back and retry.

My randoms are messed up, I'm not sure why. I don't know why my SRL randoms arn't working too well. It might be because I lag while running the script?
It's weird because I run an AMD Athlon XP 1600+ with 768 mb RAM. When I run a script I only have 16 processes…Including scar and the IE rs client.
But, I lag anyways.

From: new girl69
How is missing ores a good thing? It makes it more detectable. When you drop ores playing legit, you don't just randomly miss some; then not go back and retry.

My randoms are messed up, I'm not sure why. I don't know why my SRL randoms arn't working too well. It might be because I lag while running the script?
It's weird because I run an AMD Athlon XP 1600+ with 768 mb RAM. When I run a script I only have 16 processes…Including scar and the IE rs client.
But, I lag anyways.

Depends what script your using, ineffiecient scripts, that Find a Color through the whole screen to much, or have to many stored variables etc, will tend to lag.

@Ejjman1, nice your script has really grown better, from the start.

I used this when i went to school.. apparently 10 minutes after it was on white wolfs mountain :|


edit: tryed again when i went to work… AND:

+—-Ejjman1's PowerMiner Report—-+
+–Worked for 3 Minutes, and 40 Seconds
+–Mined Approximately 25 rocks.
+–Total Approximate Xp Gained: 437,5
+–Did 1 load.
+–Found gas 0 time.
+—-Ejjman1's Powerminer Report—-+
Found Head
Attached Head & Handle
Found Head
Attached Head & Handle

Well, i find that hard to believe. Also it died.

          while IsChatMessage('You swing') do
           begin
             if (IsChatMessage('You manage')) then
               Break;
             if (IsChatMessage('You swing')) then
               wait(1000);
               if (IsChatMessage('You manage')) then
                 Break;
               if (IsChatMessage('You swing')) then
                 wait(1000);
                 if (IsChatMessage('You manage')) then
                   Break;
                 if (IsChatMessage('You swing')) then
                   wait(1000);
                   if (IsChatMessage('You manage')) then
                     Break;
                   if (IsChatMessage('You swing')) then
                     wait(1000);
                     if (IsChatMessage('You manage')) then
                       Break;
                     if (IsChatMessage('You swing')) then
                       wait(1000);
                       if (IsChatMessage('You manage')) then
                         Break;
                       if (IsChatMessage('You swing')) then
                         wait(1000);
                         if (IsChatMessage('You manage')) then
                           Break;
                         if (IsChatMessage('You manage')) then
                           wait(1000);
                           if (IsChatMessage('You manage')) then
                             Break;
                           if (IsChatMessage('You swing')) then
                             wait(1000);
                             if (IsChatMessage('You manage')) then
                               Break;
                             if (IsChatMessage('You swing')) then
                               wait(1000);
                               if (IsChatMessage('You manage')) then
                                 Break;
                               if (IsChatMessage('You swing')) then
                                 wait(1000);
                                 if (IsChatMessage('You manage')) then
                                   Break;
                                 if (IsChatMessage('You swing')) then
                                   wait(1000);
                                   if (IsChatMessage('You manage')) then
                                     Break;
                                   if (IsChatMessage('You swing')) then
                                     wait(1000);
                                     if (IsChatMessage('You manage')) then
                                       Break;
                                     if (IsChatMessage('You swing')) then
                                       wait(1000);
                                       Break;

Try using the mine procedure from the SRL Mining Guild Miner.

Hey ejjman.

Not bad.
I've been testing it on a noob lvl 10 (lvl 50 mining) guy. I disabled player array functionality, since that wasn't working too well for me.

as a known issue… it can lock onto your characters clothing and walks you up one square progressively until it gets lost. Perhaps checking for "Mine Rocks" before the click. Just my noob suggestion.

Gas would be nice. :) my watchful eye has saved the pick a few times. Without gas functionalilty, it limits the running time capacity for sure.

Interesting feature is that when I lag it up. (as sometimes happens when running on virtual machines) it doesn't miss any ores in the drop sequence.

No reports, but I've never had it running longer than 30 mins without stopping for gas or something else..

+—-Ejjman1's PowerMiner Report—-+
+–Worked for 28 Minutes, and 38 Seconds
+–Mined Approximately 140 rocks.
+–Total Approximate Xp Gained: 2450
+–Did 5 load.
+–Found gas 0 time.
+—-Ejjman1's Powerminer Report—-+
Box Missed
Box Missed
Box Missed
Box Missed
Successfully executed


That ofcourse isnt the scripts fault ;). Longest run this script has performed as of yet.

Yes, gas is still disfunctional.The pick must be equipped to find on floor. These are minor problems. Fill in player arrays. Keep players at 6, don't change to 1!

Actually I have gotten it to run for over 40 minutes. But I deleted the progress report.
Here is a progress report from today.

+—-Ejjman1's PowerMiner Report—-+
+–Worked for 55 Minutes, and 22 Seconds
+–Mined Approximately 408 rocks.
+–Total Approximate Xp Gained : 7140
+–Did 17 load.
+–Found gas 1 time.
+—-Ejjman1's Powerminer Report—-+
Successfully executed

I was lucky only to have 1 random.

Mines ran for 5 hours with 4 players. Do you guys ever get the feeling that Jagex is on to you, and they make the player get randoms like every 5 f'in minutes?

Great Job, Ejjman1 your really coming along! ;)

Yes that happens to me a lot. Do you use firefox or Internet Explorer? I can't get it to run that long because I use internet explorer, and it doesn't type in the Username and Password information all the time at the login place.

Internet Explorer sucks horribly! Get Mozilla immediately! It's free, and I get 3x less than viruses or any of that crap. I just am saying this because this may cause many people problems when playing this game :D. Update immediately

Thanks WhiteShadow :cool:

I will. I like internet explorer though. But since the script can't login correctly with it I am going to get firefox. Thanks.

Sry for not updating guys. I'm just working on another script that will kick butt. Please chill. I will update this ASAP. Watch out for my new script. I won't tell you what it is though :rolleyes:

Powercutter I think.

OK people's, I've got my Chopper out! I am just updated my powerminer, and it is owning. I deleted gas cuz it's dumb. If it breaks a pick, sry. Be a noob, and use noob picks. You can get a lot of these. I'm adding an option for you to put how many picks you have. Just keep using. It is still working for the most part.

Whens the next update?

The scripts retired for now…

do you mind if i take a look at the script and make a few corrections?

He shouldn't mind…the script is over 6 months old.
Hey, Bramble, do you play Diablo 2 on Uswest?

ahha this is awesome, dang its sooo old !!!!! lawl!!