SRL Archive - RS3 Outdated / Broken Scripts

Chop N' Bonfire…

Chops and Burns at Daemonheim. I will make this thread look better at some point…

Currently about 60k+ per hour depending on your stats…

~~~~~~~~~~~~~~~~~~Chop And Burn~~~~~~~~~~~~~~~~~~
| Time Running: 1 Hours, 31 Minutes and 42 Seconds
| Woodcutting XP: 37500
| WC XP/Hour: 24.5k
| FireMaking XP: 54560
| FM XP/Hour: 35.6k
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If you are getting this:

From: Produst
umm..

SPS_GetMyPos: Finished in 125 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 78 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 78 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 110 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 109 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 109 ms. Result = (159, 131)

just stands there, doesnt chop anything..

Then it means the colours of the trees have changed…

From: putonajonny
You can add more colours, go to line 166:

Colours := [Colour(1581098, 2, 0.27, 0.15), Colour(1711919, 1, 0.20, 0.77)];

add another colour to that, it goes Colour(Color, Tol, Hue, Sat); so say you have a colour that is 123 with tolerance 4 hue 0.5 and sat 0.6 you just change it to:

Colours := [Colour(1581098, 2, 0.27, 0.15), Colour(1711919, 1, 0.20, 0.77), Colour(123, 4, 0.5, 0.6)];

Make sure you only get the colour of the brown tree though, not the red leaves…

Please post proggys etc..

First :)
Looks nice putonajonny. Damn you beat me to this one. I was like 1/2 done making mine when you released this. Meh mines was broken anyways. I'll test and proggy this :)

Going to test soon.. :)

Will give this a go later, looks and sounds nice.

umm..

SPS_GetMyPos: Finished in 125 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 78 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 78 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 110 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 109 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 109 ms. Result = (159, 131)

just stands there, doesnt chop anything..

From: Produst
umm..

SPS_GetMyPos: Finished in 125 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 78 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 78 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 110 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 109 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 109 ms. Result = (159, 131)

just stands there, doesnt chop anything..

Colours seems to change every so often, are you using willows or maples?

Maples.. it wont even start a fire when you manually chop..

From: Produst
Maples.. it wont even start a fire when you manually chop..

I think you don't have something setup right then…

umm, dont think so. Does it support SMART manager ?

From: Produst
umm, dont think so. Does it support SMART manager ?

I've not tried it, try it both with and without and then you'll know :)

Screw you man….
I have been developing this type of script for a month and a half… mine is nearly flawless.
LOL i'm jokes all day here. Supergrats on the release, will look through yours to see if you have any better procedures of functions than me. Mucho Respecto from this kid. Looking forward to 99WC

From: Joe
Screw you man….
I have been developing this type of script for a month and a half… mine is nearly flawless.
LOL i'm jokes all day here. Supergrats on the release, will look through yours to see if you have any better procedures of functions than me. Mucho Respecto from this kid. Looking forward to 99WC

I started this Saturday evening… so yours will be 1 billion times better :) look forward to it…

From: Produst
umm..

SPS_GetMyPos: Finished in 125 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 78 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 78 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 110 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 109 ms. Result = (159, 131)
SPS_GetMyPos: Finished in 109 ms. Result = (159, 131)

just stands there, doesnt chop anything..

I have this same. I use maples .

ps. willows work good

Prolly maple colors are wrong.. fix ?

try this, change brightness to low, like 3/4 for my it's work

kk, ill try..

From: Produst
Prolly maple colors are wrong.. fix ?

You can add more colours, go to line 166:

Colours := [Colour(1581098, 2, 0.27, 0.15), Colour(1711919, 1, 0.20, 0.77)];

add another colour to that, it goes Colour(Color, Tol, Hue, Sat); so say you have a colour that is 123 with tolerance 4 hue 0.5 and sat 0.6 you just change it to:

Colours := [Colour(1581098, 2, 0.27, 0.15), Colour(1711919, 1, 0.20, 0.77), Colour(123, 4, 0.5, 0.6)];

Make sure you only get the colour of the brown tree though, not the red leaves…

I think you should add Bonfire* instead of burning, may confuse people if they didn't even read the script. I need 3 lamps to use this dammmmn. Thanks for the release, i'm unfamiliar on wats the "hue" and "sat" do we use ACA to find it or?



Damn its going to get flooded now. nooos.

From: InBefore
I think you should add Bonfire* instead of burning, may confuse people if they didn't even read the script. I need 3 lamps to use this dammmmn. Thanks for the release, i'm unfamiliar on wats the "hue" and "sat" do we use ACA to find it or?



Damn its going to get flooded now. nooos.

I'll get an admin to change the thread title :) yeah you will need to use ACA to get the hue and sat… there are many ACA tutorials out there…

Renamed thread on request. :)

Umm, got it working by changeing screen brightness to 3/4.. but now it wont start fire, just drops logs randomly..

From: Nava2
Renamed thread on request. :)

Thank you :)

From: Produst
Umm, got it working by changeing screen brightness to 3/4.. but now it wont start fire, just drops logs randomly..

Post the debug please…

when i try to start the script i get this message

Exception in Script: Unable to find file 'ObjectDTM/ObjDTMInclude.simba' used from ''


Nvm i figured it out.

Nice realease I was just about to do mine but it's only 1/4 done.

From: x44
when i try to start the script i get this message

Exception in Script: Unable to find file 'ObjectDTM/ObjDTMInclude.simba' used from ''


Nvm i figured it out.

I get your error, how did you fix it?

Joey you have to download the Obj DTM extension. Thread is here, read instructions on other threads on how to set it up or ask me if you need help.

Putonajonny…you should add the link in the first post or let people know that they need it.
http://villavu.com/forum/showthread.php?t=68112&highlight=Object+DTM

From: kevin33
Joey you have to download the Obj DTM extension. Thread is here, read instructions on other threads on how to set it up or ask if you need help.
http://villavu.com/forum/showthread.php?t=68112&highlight=Object+DTM

Thanks! Ill check it out now, your a great help :)

No problem happy to help. Just so you know, it is the same as setting up SRL, MSI, and SPS when you first install Simba. All you have to do is download it then the rest is the same.

From: kevin33
No problem happy to help. Just so you know, it is the same as setting up SRL, MSI, and SPS when you first install Simba. All you have to do is download it then the rest is the same.

Yea, Thx again :)

The script is working nicely!

why is this happening when i try to run it

[Error] C:\Simba\Includes\SRL/SRL/Misc/Smart.simba(53:19): Invalid number of parameters at line 52

Same things happening to me

same here think is outdated

From: [F]aceless
same here think is outdated

change a little bit then it should work fine, add false as the second arguement to all SMART_DrawBoxEx, and delete line 160 and 161.
Thank you putonajonny, nice script, the tracking system is amazing.