SRL Archive - RS3 Outdated / Broken Scripts

From: NZ John

Doesnt even want to do south at all, its set up correctly. Just sits there. If i change the camera angle it will click the door however.

From: Evlin
Line 1256, does that need to be commented out?

From: Masterstroke
2nd run and already skipped lighting the marrentil, this makes it quite expensive :p
Had to reboot, maybe you could add a failsafe? to see if it lit the burners?
Expect a sweet proggy in a few hours, using with war tortoise ^^
After 5 runs again burners not lit =/
btw I use South ;)


Did not refill inv after storing the BoB…

From: ashaman88
haha dang it, gonna have to add another variable. Just realized altars could be in 2 different locations in a room.

-Will add that first failsafe for sure.
-When it went to refill inventory did it try to withdrawal them again or no? Haven't experienced that bug.

From: Masterstroke
I did not see that :p
I'll run some tests tomorrow as well, would be great if you could update it :D

From: NZ John
I will test it soon, busy on linux at the moment and I cant manage to get simba working right on here.

From: NZ John

Just sits there and then teles away after a while.

From: Poweraids
Ran for 2 hours and did 3k bones overnight was awesome, woke up and first 3 trips it didnt light burners :( Sorry i dont have any proggies or anything to post dunno where to find em haha

From: Evlin
Burners are an **s to detect, Gl with this mine is still kinda buggy, basically needs colour changes done.

From: Liimujx
I occasionally get this a few mins into each run.
===============================
COULDNT FIND RING, TERMINATING
Successfully executed.

From: Liimujx
I think i know the error now: the bot misclicks the bottom burner in this setup and it spam clicks the spot where the burner used to be and then it teles to castle wars and house teles to try again. Normally this fixes the issue, but when the ring is on (1) and it fails 2 times in a row, it will have no ring because it doesn't rebank.

From: ashaman88
Ahh you are right. Well let me fix up the marble burners first so you shouldn't have that problem then make a failsafe for it. Also do you have altarposition set to top?

From: NZ John
Burners are getting lit properly now, nicely done. Only thing is now, ring of dueling seems to be withdrawn within the 2-3 trip even though I already have one on.

Also, would you be willing to add support for the tz-haar ring, Im willing to help you get the info if you havent done the quest. Its pretty much unlimited teles..

From: ashaman88
Did you change any of the chat settings manually after starting the script? I should add that all chats must be off and game at filter (I'll make another way soon)

I have the ring, but how close does it get you to the bank?

From: Liimujx
===============================
DID NOT FIND HERBS, TERMINATING SCRIPT.
Successfully executed.

Ran for 16 mins and this happened even though I had herbs left, also I had no green things in the bank.

And I support the tz-haar ring, its about as close as castle wars tele is.

From: NZ John
Use the teleport option then click on "Fight caves" in the chat box.

I just had a problem with the ring of dueling, it ran out and never got a new one. What you could do is on start, check the number of charges on the ring from the up-text then declare it as a variable and so on. But if you do the tz-haar one you wont have to worry about charges

From: NZ John
Still having small trouble with the burners. Every so often the box for the top burner doesnt seem to be over the burner, maybe increase the tolerance of where the burner is so it can find it easier?

From: ashaman88
Was the bankscreen open when it did this?

It tries to find the herbs for 1 second after the bank screen pops up, if you are really laggy and the herbs don't load after one second, then it won't find them. Try changing the 1000 on line 614 to 3000.

From: Liimujx
Ok, that's probably it. Any tips on helping reduce lag? I lag more on smart than I do when I legit play.

From: Poweraids
========AshamanAltars=========
=========Version: 1.01=========
Time Running: 4 Hours, 4 Minutes and 58 Seconds
Bones Used: 4350
Experience Earned: 6821966
Experience/Hour: -82790
Bones/H: 1070
===============================
COULDNT FIND RING, TERMINATING


You make me so happy :D

From: Poweraids
Yeh i think the exp is a bit off its about 250k exp/hr haha

From: TheAnubis
So after making my own GAlter script from all of those available here, I observed the following on yours:
Pros:
-Summoning was the best of the scripts on SRL (ggzz's to be credited partly)
-More failsafes than I would ever even think of using
-Great customizability
Cons:
-BUrners (I suggest using MouseBox as well as color functions, it took me ages to find a color tho)
-Some of the DTMs don't like to work
-Door detection is sometimes off (I saw pics above, fixed it with a new autocolor function and failsafes)
I used your summoning chunk in my script, was an amazing system.
Cheers,
Anubis

From: ashaman88
Thanks for the feedback. Which DTM's weren't working for you? Which house type and direction were you using?

From: Masterstroke
I'm using the south altar, altar at the top and i just gets stuck everytime at the doorway :p
Screenie:

If (AltarDirection='N') Or (AltarDirection='S') Then
    If AltarPlace='Top' Then
    Begin
      HumanMMouse(215,48,4,4);

      If WaitUpText('alk',900) Then
        ClickMouse2(True) Else
        Begin
          ClickMouse2(False);
          WaitOption('alk',900);
        End;

      Wait(RandomRange(600,700));
      MarkTime(T);
      Repeat
        Wait(100);
        If TimeFromMark(T)>5000 Then
          Break;
      Until Not IsMoving;
    End;          

From: Masterstroke
It is top =/ or should it be Top with capital letter? :p

From: Masterstroke
Switched to Top with capital, now it seems to run perfectly :D
========AshamanAltars=========
=========Version: 1.01========= (–> change this to 1.02 maybe, small thingy :p)
Time Running: 16 Minutes and 55 Seconds
Bones Used: 275
Experience Earned: 68796
Experience/Hour: 245213
Bones/H: 980
No familiar atm, gonna run this for an hour, then switch to familiar, to test both :p

From: TheAnubis
Ran for 40 minutes, then it had an error with the tab dtm, also had a problem with herb dtm on a previous run. Other than that it was working great, finally got me 138 combat Also sometimes decides to click on these small boxes on the shelves in Cwars instead of the bank chest then shut down.

From: Masterstroke
I stopped it because it was spamming over the gilded altar 5 times in a row, don't know what could cause this, it's like het thinks that that is the lighter.
Hmm after reboot again some problem after 3 runs…

From: TheAnubis
No it did not try to open it again, it just stopped the sscript and that's where it claimed the herb dtm was missing

From: TheAnubis
========AshamanAltars=========
=========Version: 1.01=========
Time Running: 1 Hours, 18 Minutes and 37 Seconds
Bones Used: 1603
Experience Earned: 399168
Experience/Hour: 304837
Bones/H: 1224
===============================
DID NOT FIND HERBS, TERMINATING SCRIPT.
Successfully executed.

From: TheAnubis
Yeah that was with a yak, the bank is fixed seeing im using the tokkul-zo now, altho it never feels like renewing my familiar XD

From: TheAnubis
Double post but this is worth it…
========AshamanAltars=========
=========Version: 1.03=========
Time Running: 1 Hours, 44 Minutes and 45 Seconds
Bones Used: 2035
Experience Earned: 503496
Experience/Hour: 288582
Bones/H: 1166
===============================

From: xXRedNoseXx
========AshamanAltars=========
=========Version: 1.04=========
Time Running: 3 Hours, 12 Minutes and 32 Seconds
Bones Used: 3928
Experience Earned: 2089870
Experience/Hour: -92642
Bones/H: 1228
===============================

Going good at the moment, but it didn't renew a familiar when its timer went. Also the experience calculator thing isn't correct, but very nice thank you

From: xXRedNoseXx
========AshamanAltars=========
=========Version: 1.04=========
Time Running: 4 Hours, 39 Minutes and 51 Seconds
Bones Used: 5578
Experience Earned: 2480722
Experience/Hour: 20338
Bones/H: 1198
===============================
***** Found Random: Molly *****
Molly solver currently disabled
***** Failed Random: Molly *****
Banking Failed
Successfully executed.

Yeah was going good then random screwed it up ;)

AltarDirection    = 'S';           //Cardinal direction from entrance to where your altar room is
  HouseDesign       = 'BasicStone';       //House style (Zenev,BasicWood,BasicStone,Tropical)
  BurnerType        = 'Marble';         //Which type of burner do you have? (Incense,Mahogany,Marble)
  AltarPlace        = 'Side';         // From the doorway is your altar at the top of the room or side? Ex If I walk 

From: Liimujx
IDK why but after I finish lighting burners it uses the dragon bones and it doesn't click my altar. I have E, Top, Zenev and Marble.

That was with 1.04, just tried 1.03 and its working for now

From: NZ John
The only bug ive found is, sometimes it cant light the second burner then it will withdraw from the familiar after a while, which fills the empty spot in the bags. Once it lights the first one it will end up staying in a loop where it will teleport to the bank, then back to the house, sit there for a few seconds, then repeat. Could you add a failsafe so it will withdraw another herb and deposit one set of bones so it can get the maximum xp?

Found the reason why it cant light the second. My setup is

AltarDirection    = 'S';           //Cardinal direction from entrance to where your altar room is
  HouseDesign       = 'BasicStone';       //House style (Zenev,BasicWood,BasicStone,Tropical)
  BurnerType        = 'Marble';         //Which type of burner do you have? (Incense,Mahogany,Marble)
  AltarPlace        = 'Side';         // From the doorway is your altar at the top of the room or side? Ex If I walk 

When it lights the first, is seems to walk to the bottom tile, closest to the door. This only happens when the bot opens the door, opposite to where the altar is place. This results in the seconds burner being off screen, so it cannot light it.

A possible fix for this could be to click on door, opposite to where the altar is(I.e. Right door, if the altar is left, or left, if the altar is on the right)

From: HolyWord
Doesn't seem to like to click on the door to the N… It just tries to walk into the room without opening the door :p

Set up is TzHaar, N, Zenev, Marble, Top.

From: Masterstroke
I have some runs now of about 1 hr bout then it always stops with the failed to withdraw, maybe some extra checks when getting the bones from the bank?
The failsafes on the house are btw perfect! It never stops when in the house ^^
=========Version: 1.04=========
Time Running: 6 Minutes and 58 Seconds
Bones Used: 125
Experience Earned: 24948
Experience/Hour: 218522
Bones/H: 1094
===============================
Failed withdrawing, terminating

Time Running: 5 Minutes and 56 Seconds
Bones Used: 100
Experience Earned: 24948
Experience/Hour: 255150
Bones/H: 1022
===============================
Failed withdrawing, terminating
Successfully executed.

You can make it that it checks for bones like 5 times or so? It seems to check only once and then just quit =/

From: Dick Kicks
Ive had a couple errors with this script

It doesn't find a new ring of duelling when the initial 8 charges run out. It just stops.

Depending on the connection speed, it has an extremely hard time finding the altar room. Id suggest maybe moving the character to the appropriate direction in the portal square before searching for the door. This would probably work extremely well.

UPDATE:
I moved the ring of duellings beside the bones, instead of beside the herbs and it seems to find the rings when needed thus far.

From: ashaman88
Hm is the altar visible? I didn't change anything about the altar finding function from those two versions lol hmm

Yea it was still visible, but 1.4 just used the bones and then it never used it on the altar. 1.3 works almost flawlessly for me, it just can't renew new yaks.

From: Liimujx

From: ashaman88
Hm is the altar visible? I didn't change anything about the altar finding function from those two versions lol hmm

Yea it was still visible, but 1.4 just used the bones and then it never used it on the altar. 1.3 works almost flawlessly for me, it just can't renew new yaks.

That is strange like i said haha I didn't change anything with the altar finding. I just tested the renewing with torts and that is definitely working. I don't have the level to test yaks, but if someone that has them wants to test something for me shoot me a pm.

From: Wats
Doesn't work. It seems to have trouble locating both incense burners. Also it seems to have trouble withdrawing the bones.

Function WaitFindNPCTextMulti(Texts: TStringArray; Action: Fnct_ActionOptions; TimeToWait: Integer): Boolean;
var
  T: integer;
begin
  T := (GetSystemTime + TimeToWait);
  while (GetSystemTime < t) do
  begin
    if (FindNPCChatTextMulti(Texts, Action)) then
    begin
      Result:= True;
      Break;
    end;
    Wait(50);
  end;
end;

Function FindGlory: Boolean;
var
  X, Y, GloryRotated, GloryNorth: Integer;
  Bool: Boolean;
begin
  GloryNorth := DTMFromString('mggAAAHicY2NgYGAGYg4g5mJAAFYozQKVYwJiNqja+d1ZKLgh3RJMSwLlsGFGHBgCAJIeCdg=');
  GloryRotated := DTMFromString('mggAAAHicY2NgYFADYg0gVgZiRSDWgvKDgTgMiMOBOATK9wPi+d1ZDNNkToBpZCwJlMOGGXFgCAAArVoM2g==');
  Bool:= FindDTM(GloryNorth, X, Y, MSX1, MSY1, MSX2, MSY2) or FindDTM(GloryRotated, X, Y, MSX1, MSY1, MSX2, MSY2);
  FreeDTM(GloryNorth);
  FreeDTM(GloryRotated);

  if Bool then
  begin
    MMouse(X, Y, 0, 0);
    if WaitUptextMulti(['ub', 'lor', 'Glo', 'amu', 'let', 'mul', 'ule', 'lory', 'ory'], 600) then
    begin
      ClickMouse2(MOUSE_RIGHT);
      if (Not WaitOptionMulti(['ub', 'ub Amu', 'Rub', 'ub Am'], 600)) then
        MouseBox(MSX1, MSY1, MSX2, MSY2, 3)
      else
        begin
          Fflag(0);
          Result:= WaitFindNPCTextMulti(['Ed', 'dge', 'vill', 'Edgeville'], CLICKLEFT, 2500);
        end;
    end;
  end;
end;

From: ashaman88
For guys that are having trouble with the yak not renewing, did you start the script without a yak already summoned? That may throw things off till i get a work around (gotta start with it NOT summoned)

From: Mango Kush
OMG, finally a glided alter script that accualy works!
i'v been looking all over and trying all the others and this one is the only one running smoothly :)

From: ahalleran
Weird problem, the script will withdraw all the need materials, tele to my house, then not move at all, tele back to bank and in the progress report it thinks it has offered the bones.

I'm pretty sure I've entered in all my choices correctly.

  RingType          = 'Duel';         // Which type of ring are you using? (Duel,TzHaar)
  AltarDirection    = 'N';         // Cardinal direction from entrance to where your altar room is (N,E,S,W)
  HouseDesign       = 'BasicStone';         // House style (Zenev,BasicWood,BasicStone,Tropical)
  BurnerType        = 'Incense';         // Which type of burner do you have? (Incense,Mahogany,Marble)
  AltarPlace        = 'Top';         // From the doorway is your altar at the top of the room or side? Ex If I walk      

From: Mango Kush
Ok so i was botting for a hour and was baby sitting it and it failed to find the bank, it was teleing like 5 time with the tzhaar ring and coudnt find the guy to bank :/
here is the proogie tho

========AshamanAltars=========
=========Version: 1.05=========
Time Running: 1 Hours, 5 Minutes and 41 Seconds
Bones Used: 1100
Experience Earned: 276948
Experience/Hour: 252000
Bones/H: 1007
===============================
Banking Failed
Successfully executed.

From: ahalleran

  RingType          = 'Duel';         // Which type of ring are you using? (Duel,TzHaar)
  AltarDirection    = 'N';         // Cardinal direction from entrance to where your altar room is (N,E,S,W)
  HouseDesign       = 'BasicStone';         // House style (Zenev,BasicWood,BasicStone,Tropical)
  BurnerType        = 'Incense';         // Which type of burner do you have? (Incense,Mahogany,Marble)
  AltarPlace        = 'Top';         // From the doorway is your altar at the top of the room or side? Ex If I walk      

I have a basic stone house.

From: srjesus
Thanks for the script!
Used it to get 95 Prayer in under 24Hrs (from 80).
I'm sorry for not putting all the progress reports, but it ran flawlessly for a little over 25k D bones. I didn't use familiar; it wouldn't renew it. Despite not using the familiar, the script still did a fantastic job.
Every progress report ran well until Runescape's 6hr limit.
Great Work!:)
Thanks!!!

From: loollool
Isnt working that well, sometimes it opens the doors, lights the burners and uses the bones. other time it teleports to house, stands around for 15 seconds then teleports to CW and repeats.

From: ahalleran

  RingType          = 'Duel';         // Which type of ring are you using? (Duel,TzHaar)
  AltarDirection    = 'N';         // Cardinal direction from entrance to where your altar room is (N,E,S,W)
  HouseDesign       = 'BasicStone';         // House style (Zenev,BasicWood,BasicStone,Tropical)
  BurnerType        = 'Incense';         // Which type of burner do you have? (Incense,Mahogany,Marble)
  AltarPlace        = 'Top';         // From the doorway is your altar at the top of the room or side? Ex If I walk      

I have a basic stone house.

From: ashaman88
Which house type are you using? And what do you have typed into the settings?


PS gratz liim!

From: loollool
Im using the white stone house but I left that setting blank, it would still teleport to house, open door, use alter and teleport back. But sometimes it would stand still in the house or CW and teleport back and forth using the teletabs + rings of dueling, which was just wasting them.

 RingType          = 'tzhaar';         // Which type of ring are you using? (Duel,TzHaar)
  AltarDirection    = 'w';         // Cardinal direction from entrance to where your altar room is (N,E,S,W)
  HouseDesign       = 'basicstone';         // House style (Zenev,BasicWood,BasicStone,Tropical)
  BurnerType        = 'marble';         // Which type of burner do you have? (Incense,Mahogany,Marble)
  AltarPlace        = 'side';         // From the doorway is your altar at the top of the room or side? Ex If I walk
                                  // into your room would I have to go to the "top" of the room, or a "side" to get to it?
                                  // input (Top, or Side)
                                          

From: Horatio
For me the script is unable to find the portal. It withdraws everything from bank correctly, summons tortoise, teles to house but once it's there, it won't click on the portal to enter the house. I've read this thread through and all my settings are correct, what could be wrong?

From: ashaman88
Man you gotta fill those in :P The settings are important.

 RingType          = 'tzhaar';         // Which type of ring are you using? (Duel,TzHaar)
  AltarDirection    = 'w';         // Cardinal direction from entrance to where your altar room is (N,E,S,W)
  HouseDesign       = 'basicstone';         // House style (Zenev,BasicWood,BasicStone,Tropical)
  BurnerType        = 'marble';         // Which type of burner do you have? (Incense,Mahogany,Marble)
  AltarPlace        = 'side';         // From the doorway is your altar at the top of the room or side? Ex If I walk
                                  // into your room would I have to go to the "top" of the room, or a "side" to get to it?
                                  // input (Top, or Side)
                                          

Gotta fill in all of those

From: loollool
Because im using the white stone (25k option) it means I need to go redecorate my house to one of those options?

From: honeyhoney
Just a note: it doesn't summon a yak at the start of the script. (despite me setting it to do so)

From: ashaman88
Did you start with one already summoned and it tried to dismiss it, and then never withdraw a new one? If that's the case I messed that part up, it will be fixed for the next version. If you started without one summoned then I messed something up :(

1. Walks to chest
2. Opens chest
3. Withdraws 2 herbs
4. Withdraws 1 Pack Yak pouch
5. Withdraws X bones (and types in 25)
6. Uses house teleport
7. Lights burners
8. Altars bones
9. Teleports to bank
10. Repeats (but this time doesn't withdraw another pouch)

From: honeyhoney
Here's what happened;
(started without it summoned, only thing in the invent was house tabs)

1. Walks to chest
2. Opens chest
3. Withdraws 2 herbs
4. Withdraws 1 Pack Yak pouch
5. Withdraws X bones (and types in 25)
6. Uses house teleport
7. Lights burners
8. Altars bones
9. Teleports to bank
10. Repeats (but this time doesn't withdraw another pouch)

Basically, it withdraws a pouch once and never uses it.

After that I tried starting with a Pack Yak already summoned - that bit works, it immediately dismisses it :)

(edit: I can turn debugging on and give you the log if you want?)

From: ashaman88
Great feedback thanks! If you don't mind, will you go ahead and put debug on and let me know what it says? I think I have an idea of what is wrong, but want to be sure.

From: honeyhoney
Will do! Currently doing a few trips with a War Tortoise out (it's working fine so far).

I'll get the Yak out with debug on soon and get back to you.

Thanks for the swift response, and most of all, thanks for the great script. Appreciate it. :)

From: ashaman88
Oh so it's working fine with war tort?

========AshamanAltars=========
=========Version: 1.05=========
Time Running: 11 Minutes and 52 Seconds
Bones Used: 275
Experience Earned: 61996
Experience/Hour: 313200
Bones/H: 1410
===============================

From: loollool
Best Gilded alter script :D Been running for 7-15 hours with a few breaks

got me from 65 (used some other scripts which didn't work well from 52) then used yours, currently 94 prayer :D

Summoning for terror bird is a bit weird, It uses it fine at first then after about 8 runs It doesn't summon one again, I have summoning pots + pouches right next to bones and other items.

Other then that little flaw its running amazing.

From: ashaman88
@honeyhoney - so it does actually click on the yak with the bones sometimes? Would be an uptext problem, I will check that out




Good to hear! I managed to mess up summoning somewhere along the line, but I think I've got a fix I'll push out soon

From: ashaman88
Sorry you've got to make sure your settings are set to telly you directly into the house. I will add that to the main post.

From: Horatio
Ok, thanks :)

I've done that and the script is working now. However, sometimes (maybe 1 in 3 times) I'm experiencing exactly what honeyhoney describes, but with a war tortoise. It's not a big problem though since the difference in bones/h is minimal. When the script fails for me, it has to do with withdrawing the ring of dueling. The longest proggy I did today was 1 hours 50 minutes, but more often it messes up before that. Again, not a big problem, I will only run this when I can babysit, and 95 prayer isn't that far away anymore :)

From: idodew
two problems i have come across are that when it misses the door in my house and teles back to castle wars if it uses its last ring charge it will terminate because of having no tele, and also sometimes when there are spirit graahk's at the bank it will be unable to find the bank because it gets confused between the bank and graahks. But overall this is a very good script so far ive gone from 71-86 prayer and i have 95 banked. hopefully can buy 99 shortly.

From: Poweraids
just tried it, got a problem.

it sets up fine, house tabs, takes a few tries to open the south door, then lights one burner, stands there for about 10 seconds, then dueling ring teles, gets another marrentil out of the bank and house tabs again.

it keeps repeating this and doesnt burn any bones.

help?

From: Spexx
Just a quick question, does this have any anti-ban features? if so can you say what they are? because so far it looks really linear. However, despite that, great bot. great job

From: ashaman88
What do you mean by linear? It won't ever click on the same spot twice, and timings are all randomized. The only time I will eventually add random mouse movements or checking stats or w/e will be while its waiting on the altar to be done.

From: Spexx
Yeah, thats what I meant, that would be cool. by Linear I mean, it just does the exact same thing, doesn't look like much variation in clicks etc. For example withdraws bones when there's exactly 3 bones left every times a bit iffy in terms of botting, its a lil obvious but hey idk

From: Spexx
Yep, it just says 26 and not random, should i copy and paste it in? also, where do you learn codes such as this? I'd love to learn and just add bits in and share things. It would be nice being able to click light burners with just a left click and little things like that.Thanks for your help

From: Spexx
oh I just changed the 26 thing :S what do I change so it knows what bones it should have before it clicks bob rather than when there's 3 bones left all the time? btw i clicked on the get bob function list on the side and changed the 26, is that the right line?

From: InhumanSkills
I have a problem with the bot. Once every blue moon it will teleport to the house before filling up the inventory again. This causes the bot to just sit there clicking on the altar not knowing what to do. Is there a way to slow down the bot? I love the fast xp but I would rater have something that is stable and that I can run over night.

Setup:
BasicStone
Ring of Dueling
Tort
West altar with altar in the south location.

The bot works fine for 5 or so trips then it breaks. =/

If Not InvFull Then
      If BankTime=5 Then
      Begin
        Writeln('Failed withdrawing, terminating');
        TerminateScript;
      End Else
        BankTime:=BankTime+1; 

From: ashaman88
Hmm that doesn't make any sense…this is the failsafe in the banking procedure:

If Not InvFull Then
      If BankTime=5 Then
      Begin
        Writeln('Failed withdrawing, terminating');
        TerminateScript;
      End Else
        BankTime:=BankTime+1; 

And then it repeats until inventory is full. So the only reason it would be exiting banking is if it thinks the inventory is full for some reason…hmm

What exactly was it doing? Did it even try to bank?

From: Spexx
You could make it so that instead of interacting with turt it just stores it in it, because in the fight caves, no ones got familiars out. Also, another minor problem is that due to the fight cave bank being a moving one, it sometimes teles there and if the bank isn't on the screen it keeps teleing till it finds it. which is abit bot like tbh. but again, great script

From: InhumanSkills
I've been running it for an hour now without any hiccups. I ran into the problem twice already though. What it was doing was withdrawing bones, storing them in the tort and then just teleporting. I think it might be due to some lag. Guessing the bot telleports before all the bones are in the bob.

Just my guess though.

BTW thank you so much for this script! It's gonna same me so much time!

From: kiste5
my account just get stuck after opening the doors, and doesnt lit the incense burners.. :/

From: samsonthe1
Try to make a check to see if you have ring of dueling in invy? After about 30 mins I have 2 extra ring of duelings in my invy and it won't bank them. Great script though :)

From: ashaman88
Herm I'm not on my main computer but you may have found another bug! I'll check the code to make sure but i don't think i added that failsafe yet. Thanks!

From: samsonthe1
One more thing because my altar is south of my house portal it will sometimes decide not to right click and open the door and teles to castle wars and wastes a tab + time.If i move the camera angle up a bit it works tho :/

From: ahalleran
Ashaman, just wanted to thank you for this great script. I got 60-92 (going for 95 in a few days) prayer with your script, doing BABYdragon bones. It took about 60 hours of bot time and it was flawless.

From: kllj
a little help please it teles to my house and opens the door and just sits there, i have everything set right.

From: ashaman88
Which house type do you have?

From: kllj
i dont know how to post the pic the way other ppl do it, im still kinda new sorry. I hope you can figure out what the problem is

From: idodew
all i have to say is i love you. 71-99 prayer in under a week. thank you so much asha.

From: kllj
could the problem be that i need surronding rooms around the chapel?

From: klae17
Hello, great script, first one I am trying out. It worked great on my Mac, but was overheating the laptop. So trying on Windows 7. It takes a considerable amount more to load the client.

SMART loads, then the script starts. It goes through the bank, withdraws, then teles. Then it stands where it was and rotates the camera for 2-3 minutes until it clicks on a random door (first time it clicked north, then east). The altar is south.

Earlier, on the mac, withdrawn rings of dueling were stacking in inventory, the script was unequipping ring of dueling (1) and leaving them in there.

Summoning Pack Yak just withdrew the pouch but did not summon.

Let me know if you need pics or something else from the log.

From: geenoh
I believe I have everything set right.

Basic stone, incense, Tzhaar, West altar and top.

As other people have said, it withdraws everything fine, teleports, opens the door to the altar and then just stands there. Any ideas?

EDIT: The only thing I can think of is that there's a window around one of the burners that it seems to hover around while waiting in the doorway, other than that I'm not sure.

From: kllj
ringtype = 'duel';
altardirection = 'n'; housedesign = 'basicstone'; burnertype = 'marble'; altarplace = 'top';

From: geenoh


I also added you on skype.

From: Packard23
the bot is flawless for me using yak/duel port

edit: it doesn't summon another yak..when it runs out and doesnt drink summ potion

Time Running: 43 Minutes and 17 Seconds
Bones Used: 1100
Experience Earned: 238397
Experience/Hour: 327600
Bones/H: 1528

still running

  Case PTS Of
    0: Begin Pouch := DTMFromString('mGQAAAHicY2RgYLjJyMCwF0hnB+gzgAAjiAAAKdkChA=='); Bones:=25; End;
    1: Begin Pouch := DTMFromString('mQwAAAHicY2ZgYDAGYlsozgLiFCgdGprEcHjfCoZpxXoMIkA+DDMiYSAAAP2yBpQ='); NewPouch:=1920000; Bones:=37; End;  //terrorbird   1920000
    2: Begin Pouch := DTMFromString('mbQAAAHicY2VgYDAFYisg1gNiGyC2BuL3QPwEiD8A8RcgfgfEna4iDFfO7GDQ15BnaHcRAWN+oDg6ZsSCwQAAEz8LfQ=='); NewPouch:=2400000; Bones:=43; End;          //war tort  2400000
    3: Begin Pouch := DTMFromString('mbQAAAHicY2VgYMhlguAkIC4D4hwgfgQUfwXEL4D4NRDfAuJ9+5YwWJsbM9RV5zJsXjeL4djB1QwiQHF0zIgFgwEACPUPaA=='); NewPouch:=3000000; Bones:=55; End; //packyak     3000000
  End;     

From: ashaman88
I think i might see what the problem is, your the first to test that design hehe. I need to tv you to be sure though.



That is so dumb! The way I have it, it should dismiss the familiar like 5 minutes early, did it not do that? Then withdraw and summon a new one.

For the guy who asked, I do have it on a set timer to renew the familiar, when i set that timer to 60 seconds (ie it will dismiss and summon a new one each round) it does it perfectly. eh all i can think of is maybe my timers are off. If you want to test that theory for pak yak, change the part at the end of the setup procedure where it says:

  Case PTS Of
    0: Begin Pouch := DTMFromString('mGQAAAHicY2RgYLjJyMCwF0hnB+gzgAAjiAAAKdkChA=='); Bones:=25; End;
    1: Begin Pouch := DTMFromString('mQwAAAHicY2ZgYDAGYlsozgLiFCgdGprEcHjfCoZpxXoMIkA+DDMiYSAAAP2yBpQ='); NewPouch:=1920000; Bones:=37; End;  //terrorbird   1920000
    2: Begin Pouch := DTMFromString('mbQAAAHicY2VgYDAFYisg1gNiGyC2BuL3QPwEiD8A8RcgfgfEna4iDFfO7GDQ15BnaHcRAWN+oDg6ZsSCwQAAEz8LfQ=='); NewPouch:=2400000; Bones:=43; End;          //war tort  2400000
    3: Begin Pouch := DTMFromString('mbQAAAHicY2VgYMhlguAkIC4D4hwgfgQUfwXEL4D4NRDfAuJ9+5YwWJsbM9RV5zJsXjeL4djB1QwiQHF0zIgFgwEACPUPaA=='); NewPouch:=3000000; Bones:=55; End; //packyak     3000000
  End;     

For 3 where it says Newpouch:=300000whatever change it to 60000 and let me know if it renews it each round, then increase that number again.

From: Incanumix
Error


How can i fix this?

From: John
Your SRL Is Out Dated, Update it.

ConvertTime(Timer, H, M, S);
if (M > (NewPouch div 60)) then
   SummoningRenew(PTS);

From: Brandon

ConvertTime(Timer, H, M, S);
if (M > (NewPouch div 60)) then
   SummoningRenew(PTS);

From: takkinae
IM new here…and I need help D=
script opens door but doesnt detect the marble incense…and teles there and back…multiple times…does no bones for me

From: InhumanSkills
gotten over 5m prayer xp with this bot so far. Can run for 2-3 hours with familiar after that time the bot just goes without familiar. Fine by me. Only getting 100k xp an hour because i'm cheap and am using baby dragon bones. >.>

From: ashaman88
gratz macho! are you using v1.06? I was just helping another guy and it looks like the walking needed for the north w/ top altar is missing. the walking that is needed, somehow it disappeared :/ I re added it for him, but it looks like I will need to push another version real quick with the walking put back in!

From: klae17
Fixed the spinning camera, got 83-86 from two days of the script on (it logs off when it doesn't see the ring of dueling, which I have 400 of), does it after each 30 minutes so I have been babysitting it for a while. Other than that…Thank you! Awesome coding, summoning is working again too!

EDIT:

Here is the error

========AshamanAltars=========
=========Version: 1.06=========
Time Running: 1 Minutes and 16 Seconds
Bones Used: 55
Experience Earned: 6048
Experience/Hour: 284400
Bones/H: 2828
===============================
COULDNT FIND RING, TERMINATING
Successfully executed.

From: machofan
Yes, I was using 1.06, without any familiars.

The only problem I seemed to come across was the ring not appearing sometimes in the equipment slot which resulted in the script terminating - the same happened with v1.05.

Other than this problem, I managed to get some 6 hour proggies which was really awesome.

Thanks again for such an amazing script!

From: ashaman88
Hmm i'm wondering if it's just a dtm issue, cuz it has pretty big wait times to find the dtm…Maybe I'll just make a simpler method of detecting it. Or a more resilient dtm.


Ohhhh I see the problem with the north people. I forgot to make it lowercase, so if you don't put in "Top" exactly like that (with a capital T) it won't work. I'll fix that so you can put any variation of top for the next version.


Thanks for the feedback guys!

From: Vidya
Mine is just standing in front of the open altar room door. However, if I manually walk into the altar room, then continue the script it works just fine, then gets into the same problem with all sub-sequential trips.

Ring: duel
Direction: n
Design: basicwood
Burner: marble
Altar: top

From: ashaman88
read two posts up, make sure you put "Top" exactly

From: Vidya
I did, I'm still getting the same problem.

From: ashaman88
Try put 'N' as well?

AltarDirection = 'E'; // Cardinal direction from entrance to where your altar room is (N,E,S,W)
HouseDesign = 'BasicWood'; // House style (Zenev,BasicWood,BasicStone,Tropical)
BurnerType = 'Marble'; // Which type of burner do you have? (Incense,Mahogany,Marble)
AltarPlace = 'Top';

From: wazzzup
mine just sits at door hovering over the gilded altar, gonna try the mahogany burners instead of marble.

From: Masterstroke
ok finally understood the error.

When failing to find to door, it keeps on teleporting from cw to house until rings is out and you stand there in your house, no ring left =/
What it should do: if failed to find door, just tp back, go to bank and repeat what it normally does for the banking. Why? Because this way it also sets the cameras right.
It often gets stuck at the same spot/same angle and keeps on tp'ing and never changes that angle.

From: Masterstroke
ok finally understood the error.

When failing to find to door, it keeps on teleporting from cw to house until rings is out and you stand there in your house, no ring left =/
What it should do: if failed to find door, just tp back, go to bank and repeat what it normally does for the banking. Why? Because this way it also sets the cameras right.
It often gets stuck at the same spot/same angle and keeps on tp'ing and never changes that angle.

From: samsonthe1
To the users using south portal just buy another altar and burners for 2m :P

edit: Join Date: Dec 2008? really? I am a huge leecher haha.

From: biohazard96
It just stand there, hovering over the altar. Any help?

RingType = 'duel'; // Which type of ring are you using? (Duel,TzHaar)
AltarDirection = 'E'; // Cardinal direction from entrance to where your altar room is (N,E,S,W)
HouseDesign = 'BasicWood'; // House style (Zenev,BasicWood,BasicStone,Tropical)
BurnerType = 'Marble'; // Which type of burner do you have? (Incense,Mahogany,Marble)
AltarPlace = 'Side'; // From the doorway is your altar at the top of the room or side? Ex If I walk
// into your room would I have to go to the "top" of the room, or a "side" to get to it?
// input (Top, or Side)


-edit-
Ok, It seems switching the burners and the burner type to mahogany fixes the problem. Now that I have that sorted out, excellent script like always, Ashaman :)

-edit 2- It seems that at the beginning of the script, I have to find move around the angle a little bit for it to recognize the incense burners. In other words, I have to find a sweet spot for the angle for it to both recognize the burners and to not reset itself to north. After that it's smooth sailing, from what I'm seeing

========AshamanAltars=========
========Version: 1.06=========
Time Running: 4 Hours, 13 Minutes and 51 Seconds
Bones Used: 4737
Experience Earned: 484894
Experience/Hour: 111600
Bones/H: 1119
===============================

========AshamanAltars=========
========Version: 1.06===+=====
Time Running: 3 Hours, 57 Minutes and 49 Seconds
Bones Used: 4343
Experience Earned: 454829
Experience/Hour: 111600
Bones/H: 1096
===============================

From: ashaman88
Your altar place should be 'top'

As for everyone else, I'm busy tonight, but I will get back to you all tomorrows!

From: biohazard96
Only works when I have it set to side o.o

From: biohazard96
I tried it set exactly as 'Top' , but I actually think it IS side. When viewing from the doorway, the altar is at the side, not the top, like the pictures in the instructions say.
If I move the angle just a bit to the right, I can get the script to work consistently. The problems are that it sometimes doesn't detect dueling rings and that it doesn't renew summons. Any ideas?

From: ashaman88
Ah yeah i looked at pic too fast :/ you are right it should be side. I think it's just the search box needs to be increased. Add me on skype: hotshot1489

As for the duel rings, it doesn't detect them even when they are clearly visible and there? It may not have a ring when it breaks and keeps looping from bank to house until it's out of rings. I think I am going to implement a failsafe for duel ring detection. And yes summoning renew will be fixed soon.

From: loollool
Scripts working perfect for me, It's not renewing the BoB tho, have the potions + pouches right next to the other stuff! Still good tho

From: sniper90
Ok so the incense seems bugged- I changed it to mahogany and it worked fine. zenev + mahog works alright :) seems like a good script so far! thanks!

basically with incense it opens the door and waits there

From: C0N0R
Its opening the door and doing nothing else.

http://gyazo.com/afa727599ce5bb1c3f2dbfd94b9f312b

thats where it stands

From: ashaman88
Incense means the oak kind, it worked fine for me back in the day, was it never clicking on it for you?

From: Brandon
Wrote this some time back when I used to Edit Flight's Nature Crafter:

{$I SRL/SRL.Simba}

var
  RingCount: Integer;

Function WearRing: boolean;
var
  RingDTM, X, Y: Integer;
begin
  RingDTM := DTMFromString('mWAAAAHicY2FgYGAFYk4GCOACYg4omweKXVwcGESnSzKsmCDBUJ0lyGAEFEPGjGgYBADTGwTc');
  if FindDTM(RingDTM, X, Y, MIX1, MIY1, MIX2, MIY2) then
  begin
    MMouse(X, Y, 5, 5);
    if not BankScreen then
    begin
      ClickMouse2(True);
      Result := True;
    end else if BankScreen then
      begin
        ClickMouse2(MOUSE_RIGHT);
        Result:= WaitOption('Wear', 1500);
      end;
      if Result then
        RingCount := 8;
  end else
    Result := False;
  FreeDTM(RingDTM);
end;

Function GetRingCount: Integer;
var
  S, S2: String;
begin
  GameTab(tab_equip);
  if WearingItem(11) then
  begin
    MouseEquippedItem('ring', 3);
    Wait(RandomRange(175, 350));
    S := GetUpText;
    Wait(RandomRange(175, 350));
    S2 := Between('(', ')', S);
    if not (S2 = '') then
    begin
      Writeln('We have '+S2+' ring charges left');
      Result := StrToIntDef(S2, 8);
    end
  end else
    Result := 0;
end;

Function Bank: Boolean;
var
  NeedRing: Boolean;
begin
  NeedRing:= (RingCount < 1);
  if (NeedRing) then
    if BankScreen then
      //Withdraw ring blah..
      //WearRing.
end;

Function TeleportTo(Where: String): Boolean;                //Lets assume Where = CW..
begin
  Case LowerCase(Where) of
    'cw':
          //Script Mouses Equipment ring slot.. to check for uptext..
          RingCount:= GetRingCount - 1;
          //Script right clicks ring to teleport.. This guarantees ring count is correct!
  end;
end;

From: ashaman88
Incense means the oak kind, it worked fine for me back in the day, was it never clicking on it for you?

From: sniper90
AH! The marble one is called "Marble Incense" so I thought that was the only Incense one

Otherwise it's a fairly good script- sometimes it clicks the green area south of the altar. My house is Zenev with Mahog burners so it shouldn't click the green area at all. Anyway, with baby-sitting it did fine :)

Perhaps make it not turn everything to "Off"? Might seem a bit strange if everyone who does prayer does this? I usually keep public on because someone at TzHaar bank was doing herblore and talked to me between runs to make sure I wasn't a bot haha.

Either way, thanks it got me 99 prayer :)

From: Harry
Small bug: when teleporting, it tries to find the basicwood door on the "there's no place like home" screen. Other than that works good for me so far.

From: motherloader
Dude nice, had to config a bit but it works great. But there is one issue could you support praying at summoing obelicks outside of cw. Because when i run out of summoing points i cant summon my terrorbird. :)

From: Beriously
THANKS SO MUCH
========AshamanAltars=========
=========Version: 1.06=========
Time Running: 6 Hours, 24 Minutes and 21 Seconds
Bones Used: 8525
Experience Earned: 2148300
Experience/Hour: 358050
Bones/H: 1337
===============================

From: public_static_void_main
Everything is working flawlessly EXCEPT the duel ring.. It keeps forgetting to replace the ring and also the start of script for the first run it just sits by door then teles to CW then teles back to house then starts to light and bury.

From: biohazard96
70-95, great script :)

From: public_static_void_main

From: Bownedi
Doesn't find the portal to home -.-

From: Harry
So set it so it teleports you directly into your home, in the RS settings.

From: grindscape
Const
{ *****THESE ARE ALL CASE SENSITIVE***** }
SRLStats_Username = ''; // Leave blank if you don't have a stats account
SRLStats_Password = '';
RingType = 'tzhaar'; // Which type of ring are you using? (Duel,TzHaar)
AltarDirection = 'e'; // Cardinal direction from entrance to where your altar room is (N,E,S,W)
HouseDesign = 'tropical'; // House style (Zenev,BasicWood,BasicStone,Tropical)
BurnerType = 'mahogany'; // Which type of burner do you have? (Incense,Mahogany,Marble)
AltarPlace = 'top'; // From the doorway is your altar at the top of the room or side? Ex If I walk
// into your room would I have to go to the "top" of the room, or a "side" to get to it?
// input (Top, or Side)

Procedure DeclarePlayers;
Begin
HowManyPlayers := 1;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;
With Players[0] Do
Begin
Name := '';
Pass := '';
Pin := '';
PTS := 1; //Pouch to summon, 1 for terrorbird, 2 for wartort, 3 for yak, 0 for nothing
BoxRewards := ['Coins', 'oins'];
Active := True;
End;
End;
My altar is at top and I lag whenever I open the door. I looked at the debug console and it got stuck trying to light the burners and kept saying "doing burners" "Herbs present". It just stands there and the game lags really bad. Before that, it works fine. Any suggestions?

From: waste str
Thanks so much! Used from 96-99 in 2 days. flawless. :)

From: Bownedi
Ah I'm an idiot -.- Thanks :)

New problem: My altar is "top" of the room. When the bot opens the door it starts lagging and then teleports away… Help? :)

From: ashaman88
Put 'Top' exactly like that. Theres a fix for that in the next version



Grats man!



See first comment above

From: ashaman88
Put 'Top' exactly like that. Theres a fix for that in the next version



Grats man!



See first comment above

From: grindscape
can someone send me their exact settings that work? I really wanna get in on this awesome script:). Aslo, I don't want to be impatient, but when are you going to make the new version of this script?

Just got back in town, so it will have to be tomorrow. I will address everyone then!

bot waiting near altar room, doesnt enter. waits 10 sec then tele back.

From: Dmyz
bot waiting near altar room, doesnt enter. waits 10 sec then tele back.

From: bgxsaer
Ashaman it would be great if you can manage to get South to work as well as the other locations :). If not, I will just build an alter North :p. Thank you for the nice script.

From: Dknepp
I have Altar North (side), using Tokkul ring..start it up it gets 2 marrs and the bones out of my bank..teleports into house opens door and just stands there, then teleports back to the fight caves. Am I doing something wrong?

From: Dknepp
Sounds pretty epic, first script I found that supports tokkul ring! Love that method..is there by any chance in the near future that your script will support Runic Staff or Great Runic staff? Would free up another inventory spot and make the cost go down a bit since you wont have to buy teleport to house tabs. All in all great script, i'm going to be running it pretty soon..if i get a decent progress report ill post it. Thanks man

From: Deload
This is awsome!

Time Running: 5 Hours, 48 Minutes and 57 Seconds
Bones Used: 6102
Experience Earned: 1405910
Experience/Hour: 241200
Bones/H: 1051

With d bones and war tort :)

EDIT:
reason for that the script had stopped, was molly random event.

From: rico121
Most of the time it leaves a few bones in my invent and just tele's to cw…:/ also wouldn't changing all the game settings at the bottom such as private,game,public all to off and filter make it be easier to detect ?

From: ToinCoss
Problem… It goes to the correct door (N) but when it gets in the room it tries to walk past the burners, then keeps trying to walk further north.

From: Dknepp
Uploaded with ImageShack.us">
Thats where the program stops..then it teleports back to the fight caves. then breaks a house tab right away and just stands there again

From: Dknepp
Uploaded with ImageShack.us">
Thats where the program stops..then it teleports back to the fight caves. then breaks a house tab right away and just stands there again

From: Deload
I have 1 small bug from version v1.06(don't know if you fixed that in 1.07, havent tested it yet).

Sometimes when withdrawing bones, from the top right spot, it would just hoover over the bones for a few seconds, close the bank, open, repeat. It would take it a few tries before managing to withdraw the bones, but with your failsafes it did manage to do it eventually without furthermore problems.

And i consider this a smal bug, not really not worth mentioning even. Everything else seems flawless IMO. I love this, you're and awsome coder!

From: bgxsaer
Does the run fine, then when it teles to CW, it just stands there instead of going to bank.

Debug is:

FOUND RING TELEPORTING
WAITING FOR BANK
DOING BANKING
WALKING TO BANK SYMBOL
OPENING BANK
PTS=0
WAITING FOR BANK SCREEN
DOING BANKING
WALKING TO BANK SYMBOL
OPENING BANK
PTS=0

From: bgxsaer
It seems to be working now, thanks for the fast response time :).
It seems to constantly withdraw duel rings btw… like one every run.

From: bgxsaer
So far those issues have been resolved :). Will let you know if anything else comes up, South is working great!

From: ashaman88
Which version? Hope I didn't break anything haha

From: grindscape
It is quite unstable for me. When it banks, sometimes the mouse just goes all over the place in the bank and then says I have no tzhaar ring and ends the script. Here are my settings:
RingType = 'tzhaar'; // Which type of ring are you using? (Duel,TzHaar)
AltarDirection = 'e'; // Cardinal direction from entrance to where your altar room is (N,E,S,W)
HouseDesign = 'basicwood'; // House style (Zenev,BasicWood,BasicStone,Tropical)
BurnerType = 'mahogany'; // Which type of burner do you have? (Incense(means oak),Mahogany,Marble)
AltarPlace = 'side'; // From the doorway is your altar at the top of the room or side? Ex If I walk
// into your room would I have to go to the "top" of the room, or a "side" to get to it?
// input (Top, or Side)

Procedure DeclarePlayers;
Begin
HowManyPlayers := 1;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;
With Players[0] Do
Begin
Name := '';
Pass := '';
Pin := '';
PTS := 1; //Pouch to summon, 1 for terrorbird, 2 for wartort, 3 for yak, 0 for nothing

From: ToinCoss
I am using 1.07.
I'm sure it's nothing you did; there is probably an error on my part. But I have correctly defined the type of burners, the house type, the direction of the altar, the type of altar… all that good stuff. I have it running in lowest detail possible and I haven't tried using it with summoning yet because I want to see if it works first.

All it does is teleport to my house, go into the north room (where the altar is), then click past the altar and basically walk into the wall repeatedly.

Any suggestions?

From: Ablinn
Well when I woke up to see this let me tell you I was frigging amazed dude, the longest proggy I was yet on my way to 95 prayer was roughly 2.5 hours - 3 hours and even then that was pausing and helping it a bit… I just woke up this morning to this proggy and 94/95 prayer in 2 days and im 100k from 95!!

Time Running: 7 Hours, 11 Minutes and 14 Seconds
Bones Used: 7687
Experience Earned: 1898570
Experience/Hour: 262800
Bones/H: 1069

Thanks again.

From: ashaman88


Epic proggy, nice!

From: Ablinn
Feel free to put it on your OP, and I'd say add me to the 99 list cause I just got 95.. but only because I won't be going any further and this got me 70-95 in 2 days :D

From: iLuke
I found this MINIMAL bug that does nothing, but its still a bug. When it has to bank for the duel ring (8), it examines a dragon bone (or any bone) and opens bank again. Its just a small bug, yet it might be easy to fix :)

From: rico121
Sometimes it hovers over marble altar, then right clicks burner, missing it so it just says' walk here' then hovers over marble altar again, repeats this process a few times, then eventually clicks on the burner it looks to right click at exaclty the same spot each time too :/ although having said that, ran this bot v1.6 last night and got a sold 3 hours out of it :P 900k xp :D the issues mentioned are on 1.8 too

From: rico121
Can't seem to get a decent proggy with this version (1.8) :/ max ive had so far is about 1hour 15 mins

From: ashaman88
Gotta give me more than that if you want help :/

Are you sure graphics settings are correct? Is all your simba stuff updated?
Where exactly is it breaking? Is it the same thing everytime? Can you post a pic of where it is breaking or get a video of it?
What exactly do you have typed into your script? Will you post that as well as a picture of you standing in your house.

Quote:
Originally Posted by grindscape View Post
It is quite unstable for me. When it banks, sometimes the mouse just goes all over the place in the bank and then says I have no tzhaar ring and ends the script. Here are my settings:
RingType = 'tzhaar'; // Which type of ring are you using? (Duel,TzHaar)
AltarDirection = 'e'; // Cardinal direction from entrance to where your altar room is (N,E,S,W)
HouseDesign = 'basicwood'; // House style (Zenev,BasicWood,BasicStone,Tropical)
BurnerType = 'mahogany'; // Which type of burner do you have? (Incense(means oak),Mahogany,Marble)
AltarPlace = 'side'; // From the doorway is your altar at the top of the room or side? Ex If I walk
// into your room would I have to go to the "top" of the room, or a "side" to get to it?
// input (Top, or Side)

Procedure DeclarePlayers;
Begin
HowManyPlayers := 1;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;
With Players[0] Do
Begin
Name := '';
Pass := '';
Pin := '';
PTS := 1; //Pouch to summon, 1 for terrorbird, 2 for wartort, 3 for yak, 0 for nothing
Hmm that doesn't make much sense (code-wise)… how often does that happen? Do you have all the right graphics settings and all simba stuff updated?

From: Badass

works for like 10 mins and then it stucks at that point. Btw, i'm using tzhaar ring

From: grindscape
I was using 1.7 of your script and my simba version is 982 and the current is 984 I think. It happens like every 3-4 bank trips
My MSI SRL and SPS are current though

I was using 1.7 of your script and my simba version is 982 and the current is 984 I think. It happens like every 3-4 bank trips
My MSI SRL and SPS are current though

RingType = 'tzhaar'; // Which type of ring are you using? (Duel,TzHaar)
AltarDirection = 'e'; // Cardinal direction from entrance to where your altar room is (N,E,S,W)
HouseDesign = 'basicwood'; // House style (Zenev,BasicWood,BasicStone,Tropical)
BurnerType = 'mahogany'; // Which type of burner do you have? (Incense(means oak),Mahogany,Marble)
AltarPlace = 'side'; // From the doorway is your altar at the top of the room or side? Ex If I walk
// into your room would I have to go to the "top" of the room, or a "side" to get to it?
// input (Top, or Side)

From: grindscape
thanks to your script, I just got 90 prayer, and I have 94 (almost 95 ) banked you're the best ashaman88
btw I can post screenshot if u'd like

From: ashaman88
That is pretty strange. Are you using a familiar? It shouldn't even throw that if your inventory isn't full… Have you watched this actually happen? Could you tell me what it is doing? It looks like it's trying to withdraw bones, but if that failed it should throw off a different message (failed banking)

From: Badass
Not using a familiar. And yes, I saw it when it happened. I'll record it and post.


Here, http://www.youtube.com/watch?v=f71AOvu-HCE
And if you want to see my settings;

From: Kumar
Wont restock summoning and getting extra rings in inventory.

From: grindscape
So when the error occurs, It uses the ring to tele from house to tzhaar. then it opens up that bank, and instead of withdrawing the marentills, like it usually does, the mouse goes randomly over the screen as if it is looking for something, probably the ring.

From: rjk1990
I'd like to add that i too am getting the "couldn't find ring" exactly the same as one of the above posters, after a few trips. Really not ideal, the script looks amazing if only that worked >_<

(*
Certers
=======

Stores all the routines to solve the Certers random. None of these routines
should be used throughout scripts. They only need to be called in SRL's random
detection methods.

This solver uses multiple DTMs to identify each item. If an item can't be
identified right away, it will rotate the item and loop through the items again.

*)

const
CT_ITEM_COUNT = 9;
CT_ITEM_BOWL = 0;
CT_ITEM_SHEARS = 1;
CT_ITEM_RING = 2;
CT_ITEM_SWORD = 3;
CT_ITEM_BATTLEAXE = 4;
CT_ITEM_SHIELD = 5;
CT_ITEM_SPADE = 6;
CT_ITEM_HELMET = 7;
CT_ITEM_FISH = 8;

type
TCTItem = record
name, text: string; // name and text to click
DTMs: TIntegerArray;
end;
TCTItemArray = array of TCTItem;

(**
* Author: DemiseScythe
* Description: Detects if a player is in the Certers random.
*)
function CT_Detect(): boolean;
var
s: string;
begin
if (tabExists(TAB_MAGIC)) then
exit;

s := getNPCChatname();
result := (s = 'Dll8g' {Miles/Niles}) or (s = 'Gll8g' {Giles});
end;

(**
* Author: Coh3n, DTMs by DemiseScythe
* Updated by: [J]ustin - Spade DTM - 19/05/2012
* Description: Returns a TCTItemArray of all the Certer items.
*)
function CT_GetItems(): TCTItemArray;
begin
//setLength(result, CT_ITEM_COUNT);
setLength(result, 9);

with result[CT_ITEM_BOWL] do
begin
name := 'Bowl';
text := lowercase(name);
DTMs := [
DTMFromString('mAAEAAHic42FgYGBiZGBgBuKfDBCaD4i/ANmvgFgGyBYG4k9AtiBU3TUg+ywQXwXiuwwQ/kkgfgDEj4H4FBC/A+IPQPwRiAsy5BhyU2UZijLlGIqz5MD88lx5hvx0WQY7Z3GGhBhphsRYGQYHV3EG/wBJBn6gHlIwI8gPJGBkAADRtRm0'),
DTMFromString('mlwAAAHicY2dgYJBggABmIJYCYgMg1gFicSAWAmIuIFYBYn0gloPyQaA0T5GhpkSJIStNnsHLX5rByVOSITZWliEvS4GBHyiPCzMCMRMODAUAmFgH6Q==')
];
end;

with result[CT_ITEM_SHEARS] do
begin
name := 'Shears';
text := lowercase(name);
DTMs := [
DTMFromString('mPwEAAHic42dgYOBgZGBgBWIRIBYAYm4g5gdiUSBmAGI2IP4JZDIB6d9A+gcQfwXil0D8Coi/QOkPUDZIzXcgfg7ED6D4JhBfBuJjQHwNiC8CcVqyK0NDVTBDYa4XQ1SkHUNmmhtYDERnpLgxuLgaMgT4WzC4uRsz+PkYMCTHWTKEBpkwZKfaMvAD9ZOLQd5iIhOjAQCPQCJj'),
DTMFromString('mVAEAAHicE2BgYPgPxD+A+DMQ/4LyPwDxayB+D8RfoeJvgfglEHMxMjAwAjEPELMD8WWg2HUgvgvED4D4BhA/har/CDXnORA/BOIXQLwfiE8B8VEgPgvECXGODGWFfgx5WZ4MwcFWDH5+5gy1Ja4M7bVeDKkJVgzhIaYMnh56DIVZDgz5mQ4M5UX+DI3VIQwZqW4MmWnuDPxAMyjBQC8wMFGA0QEAfj0reg==')
];
end;

with result[CT_ITEM_RING] do
begin
name := 'Ring';
text := lowercase(name);
DTMs := [
DTMFromString('mVAEAAHicE2BgYPgDxD+A+DsQMzKCCAgbxgfJg8R+AikmIP0Xqp4Ryn4BxI+B+DWUfgPEnxkg6n8B8Tcg/gLEd4D4NhBfhOJLQHwaiBOirRjSk2wZinOdGDw99BnCQ80YqopdGSZ0xDLkZ3sz5Gc6gtWkJFgzeHsZMAQGWDF0N0cxmFvqMNja6zPwA82gBIO8zEQBRgcA6YwpHQ=='),
DTMFromString('mFQEAAHic42VgYGBjZGBgBmI+IGYFYk4g/g8U/wXFIDYnVF4QiHmB+A5Q7BkQPwXi11B8C4gvAfFJID4MxIeA+DgQnwPiG0BcX+rG0NcaxbBqbhZDeooVQ3NNKENuqh1Daa4jQ3WhM0NThTtDXYkrWCw/3Q7M5wfqIxUDncfARCJGAQD5FyAT')
];
end;

with result[CT_ITEM_SWORD] do
begin
name := 'Sword';
text := lowercase(name);
DTMs := [
DTMFromString('mPwEAAHic42dgYPgNxD+h9Fcg/g/l/4CK/YDy/0H5IPk/QMzIyMBwA0g/AeLXQPwBiD8D8Scg/o6k5gKQPgnEB4F4JxBvAOJVQNxUGcxQWeTHUJbnw1BX7MKQn2bLUJHnwDCpI4ahuzGCoSTLnqG62I+htymCoaU6mGFqdyxDR30YWI4fqJ9czEQBRgMABzot8Q=='),
DTMFromString('mAAEAAHic42FgYPgFxb+xsEH0DyD+gyT3EUqzMjIw8AOxKBC/BPLvAfEVID4DxKeA+AgQ7wNiL3dDBl9PY4bkWAcwrir0YUhPdGLwcDVgyEx0ZqgvcmII8zdgiAi2ZPD31GHgB+ohBQOtZ2AiASMDADBgH6M=')
];
end;

with result[CT_ITEM_BATTLEAXE] do
begin
name := 'BattleAxe';
text := lowercase(name);
DTMs := [
DTMFromString('mJgIAAHick2JgYOBnZGAQBGJRIBYGYglGiBgXEPMAMRsQcwIxMxAzAPEfBgj+BsRfgfgzlAbpEQJiEagZUkAsB2WDxF4A1TwE4jtAfA2IzwPxRyD+BMQ/gPgfA8SO70D6N1T8FRC/hqr7CcT/gZiFEUKzQd3zCyrGCXV3VYknQ2WxB0NxnhtDeZEHQ2GOK5iuLfMCy9VXeDNUl3oxlJcEMXQ0xzAUFwQwZGd6M+Tn+DJUl4cwVJWFMNRWhDJM7klkaKgJZ+hujWUoKw4CqyvM82dorIkAY36Qn+mAQd5kogPGDQCBfztn'),
DTMFromString('mJgIAAHicvdA/S4JRHMXxUwgRKQU2hCj4HkKTECIcSkJFUVSeEkX6I4kU5FKTb6ctSFBSVEiMlnBobeoFFC3aEH59uGurFz7cy7mH34XrkbS2JDmxYWxiBQ6swgW3yee24DO7B3548cesX0yNH3zjCxO8Yox3fOATz3hCFy100MQ9HvBo8p7pDdE3vQFe0Db3I7zhOBeyZVIB5TNBpRLbKp/s6qwUlpXd0eX5oazcnupXcTVu07qrJ+1z5fRApUJE1YuoapWoCta+3Z3n8VhIN7WY7bp6pHIxonXeWgS+VssL8P+aAXLdOcY=')
];
end;

with result[CT_ITEM_SHIELD] do
begin
name := 'Shield';
text := lowercase(name);
DTMs := [
DTMFromString('mfgEAAHicE2JgYPgAxC+A+DsQ/wXiz0B8B4ivAvElIL4IxKeB+D5UDScjA4MEEAswQtiCjBA9N4D4GhBfAOKbQPwUiK8A8RkgPgDE94D4DdS+o0B8GyoGMv8UVP17IJ5Q5s4wsdyDYXqtF8OkCg+GvlI3MD2j1huMu4pcGRqzHBnKEmzAfJDa6hRbuJ7KZBuGllwnBn6gWdTAQO8xMFEBYwIAOLkzag=='),
DTMFromString('mVAEAAHicE2BgYBBjZGAQAmIZIFYGYh0gtgJieyBWAmIRIOYFYnYg5gDiP0A9n4D4GxB/BOKjQHwYiA8B8UEgPgLEx4H4FBCfhGKYmhNQ+cNQ8dNAPKXMn2FSiR/DgpZkhkWtQNyWAhYriXZk6Mn3YWjN9ASLgeS787wZegt8GMrjnBkKojwY0gKsGfiBZlCCgV5iYKIAowMAy0onqA==')
];
end;

with result[CT_ITEM_SPADE] do
begin
name := 'Spade';
text := lowercase(name);
DTMs := [
DTMFromString('mJgIAAHick2JgYOAFYj4gFgFiMSifDYiZgZgDiAWhYjAMA6xQdSCaBYi5oFgYqkcSiKWAWBpqtgQQu0KxPRDbQtmOULYNEJsAsQ4Qq0LtAunjAWIhJDuZoPYwQt3HjGQvCHf2BzBUN9gyNLc7MmQXmzFU1NowVNXbMtQ22TG0dDgyZBaaguVBYiB6+pxIsrAI1H20xoxQP9Ma4wYAphgrGg=='),
DTMFromString('m5wEAAHictdBBSwJRFIbhb1wL7XKhEK2mzBBHSGnhPhhCGaLRURxERv2PLmtVooFBZCJZJLrITT/A13GINi298HAPl8t3DichaYU5pnjDM4Z4wBgTPGKET3zjB4YhxXGIFJI4wglOcWzs8mZR5iteoh7v+MAXFlhj+efPOOq3nWGAe/Rxh6dovkanKC8o6MbP/6q1L1RpWGFdsk3Zbja8t/zepZx6RuVqWhXvTLVWVtduWs0gJ79rhW9Xjqnb5rkOyN8X1qLYnvxzNkLsNe8='),
DTMFromString('m6wAAAHic42ZgYChjZmDIAuISIK4F4nwgrgPidiCeBsQTgXgWEC8C4meMDAyPgPg7EH8D4tdA/BeIuZkYGLSB2BiILYHYDIgjXa0YXE30wTjZzwFMR7lbMwTbGzHEeZgxRLmaMmQGWYNpLqA7iMWMJGAkAACJ+RWu')
];
end;

with result[CT_ITEM_HELMET] do
begin
name := 'Helmet';
text := lowercase(name);
DTMs := [
DTMFromString('mkwEAAHicE2ZgYGBkZGBgA2J2IOYGYiZGhNg/oPwfBogYiP0DiD8CMQuQLwTE/4FsVqg+QSC+CuTfAOLLQHwTiG8B8T0oBsmdB+ILQHwaSc0zIL4CxMeB+BgQnwLic0BcVmTKUJQlz5CTKstQlqfAkJ8hxzBzoidDf4czQ2ayDENKvBRDeqIMw+QeV4ZpfW4MnU32DBUlZmD19aXKDKsWBDGsnB8IluMHmkctzAgKDyphLAAATHotqg=='),
DTMFromString('mqAEAAHicE2FgYGBnhGBuIGYEYgYg/g+kvgPxV6g8BxCLALEoEPMBMQ8QC0LFJKHif4BqWYD0AyD9GIjvAfE1IH4ExG+h9Ecg/gLE/4D4DhA/BOI3QPwLKv4KygfZ+xSIPwBxfoY5g5uDEIO1OT9Db5MHw6xef4baEnuG9loXhowkY4ZwfwkGf3dRhto8FYaNi2LA8lWFtgxTO30Y1s6LAuO5EwIZ+ls8GcrybBj4gWZSE4OCjImKGBsAAK6vMEA='),
DTMFromString('mAAEAAHic42FgYPgFxB+A+B0QMzIyMDAD8R8g+y8QvwViNiCfgxFCcwHxe6DYCyB+zABhPwXiR0D8E4i/Q815BsTfgPgTEFekuDNMq4tgaC8KYCiK0mFoTDNgmNEYxdBW6A/GG6alM6ybmsYwtzWaYWlvIgM/UA8pGOgkBiYSMDIAAA0EIiY=')
];
end;

with result[CT_ITEM_FISH] do
begin
name := 'Fish';
text := lowercase(name);
DTMs := [
DTMFromString('m1gAAAHic42JgYGDiZGB4ysHAcAKIlwHxGiC+B8SPgPgrEP8HYl6gGj9GBgZXIDYBYltGCD8SiNOBOBaIw4E4BIjdQtQZ7P2UGZLyrBki0kwZ4nMsGcKT9Rg8I3QYsorNGNKLbcGYC2g3MZiRSIwAAFSFFBo='),
DTMFromString('mwQAAAHic42RgYFjPwcBwBYi/Q/FtIL4OxGug4g+AOJGRgcEYiNWB2AqIA4A4G4hzgTgCiH1A/Mokhqp6D4bKWneGju4Ahp5uF4bZc6IZpk2PYOjrdWPo7HRh4ALaRwgzEoHhAACqKhdS')
];
end;

end;

(**
* Author: Coh3n & DemiseScythe
* Description: Sets up to solve random.
*)
procedure CT_Setup();
begin
if (not loggedIn()) then
exit;

clickNorth(SRL_ANGLE_HIGH);
end;

(**
* Author: Coh3n
* Description: Clicks the "Change spin" button 'clicks' times.
*)
procedure CT_ChangeSpin(clicks: integer);
var
i, x, y: integer;
begin
if (not loggedIn()) then
exit;

mouse(364, 162, 5, 5, mouse_Move);
if (waitUptextMulti(['ange', 'nge', 'spin', 'pin'], 200)) then
begin
getMousePos(x, y);

for i := 1 to clicks do
mouse(x, y, 0, 0, mouse_Left);
end;
end;

(**
* Author: Coh3n
* Description: Identifies the item, waits for a mazimum of 30 seconds.
*)
function CT_IdentifyItem(items: TCTItemArray): integer;
var
i, j, t, t2, x, y: integer;
aFound: extended;
begin
if (not loggedIn()) then
exit;

result := -1;
t := (getSystemTime + 60000);
addToSRLLog('CT_IdentifyItem: Identifying item…');
markTime(t2);

// loops through DTMs while item is rotating on screen
repeat
for i := 0 to high(items) do
for j := 0 to high(items.DTMs) do
// look in the box where the item is rotating
if (findDTMRotatedAlternating(items.DTMs[j], x, y, 145, 150, 370, 295, -Pi, Pi, Pi/30, aFound)) then
begin
addToSRLLog('CT_IdentifyItem: Found item ~ '+items.name);
result := i;
exit;
end;

// change the spin every 15000
if (timeFromMark(t2) >= 15000) then
begin
addToSRLLog('CT_IdentifyItem: Didn''t ID item, changing spin…');
CT_ChangeSpin(randomRange(5, 10));
markTime(t2);
end;

until(getSystemTime > t);

if (result = -1) then
addToSRLLog('CT_IdentifyItem: Didn''t identify item');
end;

(**
* Author: Coh3n
* Description: Clicks the correct item's text.
*)
function CT_SelectItem(item: TCTItem): boolean;
begin
if (clickText(item.text, charsNPC, 75, 40, 240, 180, mouse_Left)) then
begin
addToSRLLog('CT_SelectItem: Clicked item text');
result := true;
end else
addToSRLLog('CT_SelectItem: Didn''t click text; may have ID''d wrong item');
end;

(**
* Author: Coh3n
* Description: Solves the random event, returns true when the portal is
* clicked.
*)
function CT_Solve(): boolean;
var
dtmPortal, i, t: integer;
items: TCTItemArray;
begin
if (not loggedIn()) then
exit;

CT_Setup();
dtmPortal := DTMFromString('mbQAAAHicY2VgYHjGyMDwCIjvAfEnIH4HxJuB4quAeBsQrwPiPUA8YWsSw8RtSQzTdqYytC2OZujeGM/ADxRHx4xYMBgAAJveEIE=');
items := CT_GetItems();
t := (getSystemTime + (3 * 60000)); // maximum 3 minutes

repeat
if (findNPCChatTextMulti(['ortal', 'atch'], nothing)) then
if (clickPortal(dtmPortal)) then
begin
result := waitTabExists(TAB_MAGIC, 8000);
break;
end;

if (not areTalking) then
begin
i := CT_IdentifyItem(items);

if (i <> -1) then
if (CT_SelectItem(items)) then
wait(2000 + random(500));

end else
clickContinue(true, true); // in case there are extra messages (GE) or we get one wrong

until(getSystemTime > t);

freeDTM(dtmPortal);
for i := 0 to high(items) do
freeDTMs(items.DTMs);

if (not result) then
addToSRLLog('CT_Solve: Certers solver timed out');
end;

From: tutkubakay
I got an error with latest update :

[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'X' never used at line 256
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'Y' never used at line 256
[Error] C:\Simba\Includes\SRL/SRL/core/antirandoms\certers.simba(122:165): Closing square bracket (']') expected at line 121
Compiling failed.

–

Solved after many tries deleting the codes :P

Well, i solved it with my tries. But the Devs should check it anyway. I am noob.

Here it is ;

Change certer codes with this, it will work ;

From: Yesp
When I do this i get tabexist at line 41?? please help.

From: Badass

From: bgxsaer
I've ran 1.09 and noticed that for some reason, after a few runs it forgets to withdraw Marrentils, Teleports to house, then is at a loss of what to do and just teleports back to CW.

From: bgxsaer
No it doesn't withdraw them.

From: pure ftw52
Epic script keep up the goodwork !

From: killsh0t
=========AshamanAltars=========
=========Version: 1.10=========
Time Running: 2 Hours, 30 Minutes and 58 Seconds
Bones Used: 3827
Experience Earned: 598753
Experience/Hour: 237600
Bones/H: 1523
===============================

look at that bones/h<3

been running flawlessly since i started using tzhaar bank and NO familiar. love it<3

From: killsh0t
it missed lighting the burner and ended up clicking outside the house putting me in the room left of my altar again :/ i fixed it up and then it did it again not long after. am i the only one with this issue?

___EDIT____
ok ive started to bank with tzhaar. seemed to fix a few problems i was having.
but now it sometimes teleports out after using a few of the bones from my familiar (still has heaps of bones in invent)

From: ashaman88
Switching banks wouldn't change it misclicking a burner. Also the way it clicks on a burner is with a right click, so how was it misclicking? What house type do you have?

I'll check out the part about the familiar, what familiar were you using?

From: Chronuswing
Mine just teles into the house, chills, then goes back, tried turning BoB on/off no avail, redownloaded, tried multiple different capitalization of entries, it's not giving me any script errors in the debug/execution information, yet it still fails to even step into the room.

From: Chronuswing
2 Seconds
i moved myself into my room so you could see the layout, it just teleports, and the cursor hovers around like its looking for the door, but doesn't find it.

From: eatthis95
Mine just teleports into the house, looks south, sits there, and waits, then teleports, my altar is south, please help me fix?

From: werder
Turn on Debug mode (line 64) if you are having problems and tell me what it says
TOOK TOO LONG TO LIGHT BURNERS

house is basicstone and altar is side, room is N, burners are 'marble' but still missclicks another burner wich is north, says -> TOOK TOO LONG TO LIGHT BURNERS, teles to castle wars and keeps doing same untill i close the script :l

From: ToinCoss
Found out my problem!
I was confused as to which type of burner I needed to type in, and here's why:
When you right-click the oak/marble burners, they say "Light Incense Burner" so I figured mine was "Incense," and that's what I typed in. In truth, my burners are marble, so that was my fault…

… but it might help to rename the command you enter for each burner :) instead of having "incense" as an option, make it "oak" to avoid confusion.

Thanks for the amazing script btw!

From: madman30
Whenever I run with the war tortoise it runs fine with a few bugs (running out of room then saying taking to long and then will tele back) but when the timer is nearly out it dismisses my war tortoise and then bones go on the ground by the bank and then doesn't summon another tortoise in its place and just has a pouch in the invent.

From: Deload
I'm still sticing to version V1.06, because its running about flawless for me :)
I tried the new version, and it have 1 bug that reoccours alot.

After filling up with bones, and teles in to house, it will only light the one burner, and position the player north of the burner so it can't see the other one. Therefor it teles back to CW, and loops.

New version im doing about 220k avarage exp/h, v1.06 im getting 280k+/h :) and runs alot smoother ;)

From: Deload
I have BasicStone, altar at south, side. I have everything setup correctly, but i still find v1.06 less buggy for me :)

or, the only big bug left on the new version is that it can't find the burner furthest away from the door, because it gets "stucked" at the north of the one closest to the door, so it can't see the south one, therefor it teles back to CW, and repeats. This one occours so often, bbut as i could see its the only bug.

It happends so often that its about 60-80k less exp/h then the old more buggy script :p

EDIT: not that it matters for me, because im 93/95 prayer now via Dragon bones.

So thanks mate! allmost done with praying on this account, just wanted to test it out :D
It's one of the best scripts on the forum in coding generally, IMO. Pretty much flawless for and rather advanced skill, with loads of integers. I just want to thank you, because this is awsome :DDD


EDIT2:
The problem as i see it is that when the player goes into the altar door from portal, it bugs out when entering on the west part of the doors(because that makes the player go infront of the burner, not from the side). When it reaches the burner from the east part of the door its all fine.

From: Blackdeath
This might be a stupid question, but how do I make the script renew summoning points?

Edit: Stupid me, didn't see the summoning potion support.
Edit2 : So far the only thing I am noticing as an issue is with they way the camera angle is set by the script, it sometimes can't find the burner. If I change this slightly to make the point a little north east, it seems to find them more often.

From: Blackdeath
In a low ping world, usual settings for simba and these for the script.

RingType = 'Duel'; // Which type of ring are you using? (Duel,TzHaar)
AltarDirection = 'E'; // Cardinal direction from entrance to where your altar room is (N,E,S,W)
HouseDesign = 'basicwood'; // House style (Zenev,BasicWood,BasicStone,Tropical)
BurnerType = 'marble'; // Which type of burner do you have? (Incense(means oak),Mahogany,Marble)
AltarPlace = 'top';

And I am not using summoning.

EDIT: So it seems to be when it enters the house and clicks on the door to open it, if it clicks on the top half of the door, it works, if it clicks on the bottom half of the door, it can't find the burner.

From: Blackdeath
When it is stuck in the bottom half of the door, the top burner is completely visible and the bottom burner is slightly cut off.

Here is a picture.

From: Blackdeath
I will get it to you as soon I get it.

From: Blackdeath
Finally got the issue, first the image



Debug box info (sorry for the ammount)

ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
38
38
1096
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
54
54
1077
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
56
56
1084
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
56
56
1084
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
56
56
1084
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
56
56
1084
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
56
56
1084
TOOK TOO LONG TO LIGHT BURNERS
ENTERING TOBANK PROCEDURE
WAITING ON TAB 26
RINGTYPE DUEL
ENTERING GETRINGCOUNT FUNCTION
We have 1 ring charges left
FOUND RING TELEPORTING
WAITING FOR BANK
WAITING ON TAB 25
Successfully executed.

From: stoffel
can maybe fancy stones be added? :p

From: Blackdeath
When it is stuck in the bottom half of the door, the top burner is completely visible and the bottom burner is slightly cut off.

Here is a picture.

From: werder
smart to show your runescape nickname wich you bot on.. i wouldnt bot on that account nymore :D ppl gonna report

From: Blackdeath
Thank you sir, I do believe it is quite smart

From: Franju
this script is fucking shit, cant even run

From: Franju
this script is fucking shit, cant even run

EDIT: I now put basicstone and it seems 2 be running

From: jjjjjrussell
I got it to work before.. now mine just sits there in the altar room and after lighting the burners it clicks the bones on the wall instead of altart then will tele back to CW

From: ashaman88
Your gratefulness is overwhelming, thank you.

Did you have to switch house types? Which house type did you have originally?

From: Meh
Running fine, just sometimes shows cannot find ring and stops.
=========Version: 1.11=========
Time Running: 43 Minutes and 19 Seconds
Bones Used: 817
Experience Earned: 205633
Experience/Hour: 284746
Bones/H: 1131

From: Franju
Yea, i had 2 sweet houses, from basicwood to basicstone, switched it, turned on the script and it got me 700k pray xp

^^^It got me 700k xp with CW, it didnt work with tzhaar, didnt work at all

RingType = 'duel'; // Which type of ring are you using? (Duel,TzHaar)
AltarDirection = 'w'; // Cardinal direction from entrance to where your altar room is (N,E,S,W)
HouseDesign = 'basicStone'; // House style (Zenev,BasicWood,BasicStone,Tropical)
BurnerType = 'marble'; // Which type of burner do you have? (Incense(means oak),Mahogany,Marble)
AltarPlace = 'side'; // From the doorway is your altar at the top of the room or side? Ex If I walk
// into your room would I have to go to the "top" of the room, or a "side" to get to it?
// input (Top, or Side)

From: bendybus
I found these options to pull the best xp/hr with minimal bugs. Great script. Ill post again after this 3 hours project.

From: jjjjjrussell
It dont click on the altar, it jut\st moves mouse to the grass

">

RingType          = 'tzhaar';
AltarDirection    = 'w';
HouseDesign       = 'basicstone
BurnerType        = 'mahogany';
AltarPlace        = 'top';

From: Rsbotter12
Somehow this script seems to have problems to use all of its ashes. It teles out from house with half inventory of ashes and full tort. My settings are:

RingType          = 'tzhaar';
AltarDirection    = 'w';
HouseDesign       = 'basicstone
BurnerType        = 'mahogany';
AltarPlace        = 'top';

INB4 Leecher.

From: Franju
this script is fucking shit, cant even run

EDIT: I now put basicstone and it seems 2 be running

From: ashaman88
Which ring? What is it doing when it says that?



Hmm that is strange, I only use tzhaar ring to test this script and haven't heard of that before. You sure you had it equipped and set ringtype to tzhaar?

From: newy1
Having a problem.

1st trip cant find burner
2nd trip finds burner
3rd trip cant find burner
4th trip finds burner
5th trip cant find burner
6th trip finds burner
…

Heres what the debug says:

ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
4
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
4
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
4
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
4
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
4DOING BURNERS
HERB PRESENT
1
2
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
2
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
2
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
11
2
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
2
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
2
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
2
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
2
TOOK TOO LONG TO LIGHT BURNERS
ENTERING TOBANK PROCEDURE
WAITING ON TAB 26
RINGTYPE DUEL
ENTERING GETRINGCOUNT FUNCTION
We have 5 ring charges left
FOUND RING TELEPORTING
WAITING FOR BANK
WAITING ON TAB 25
WAITING ON TAB 25
ENTERING BANKING PROCEDURE
BANKTIME: 1
INVENTORY FULL BREAKING LOOP
WAITING ON TAB 25
CLICKED TAB
WAITING FOR DOOR
OPENING DOOR
Black count: 0
872
FOUND DOOR UPTEXT
FOUND OPEN OPTION
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
1
11
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
2
16
16
FOUND BURNER UPTEXT
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
4
12
12
25
25
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
4
17
17
FOUND BURNER UPTEXT
DOING ALTAR PART
FOUND BONES
835
FOUND ALTAR UPTEXT
FOUND USE OPTION
CLICKING OFFER ALL BOX
WAITING FOR FIRST BONES TO GO
WAITING FOR INVCOUNT4
WAITING FOR NO MORE BONES
=========AshamanAltars=========
=========Version: 1.11=========
Time Running: 2 Minutes and 13 Seconds
Bones Used: 25
Experience Earned: 0
Experience/Hour: 0
Bones/H: 675
===============================
ENTERING TOBANK PROCEDURE
WAITING ON TAB 26
RINGTYPE DUEL
ENTERING GETRINGCOUNT FUNCTION
We have 4 ring charges left
FOUND RING TELEPORTING
WAITING FOR BANK
WAITING ON TAB 25
WAITING ON TAB 25
ENTERING BANKING PROCEDURE
BANKTIME: 1
ENTERING WALKTOBANK PROCEDURE
WALKING TO BANK SYMBOL
OPENING BANK
Summoning Timer in Minutes: 16
ENTERING OPENBANKS
OPENING DUEL BANK
SRL OPEN CHEST IS TRUE
WAITING FOR BANK SCREEN
ENTERING WITHDRAW ITEMS
FOUND HERBS
PTS= 0
WAITING ON TAB 25
CLICKED TAB
WAITING FOR DOOR
OPENING DOOR
Black count: 0
781
FOUND DOOR UPTEXT
FOUND OPEN OPTION
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
9
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
10
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
9
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT
8
ENTERING PROCEDURE BURNERS
DOING BURNERS
HERB PRESENT

From: stan2020
its good and except one thing. The bot dont use ashes on altar. What Should I Do??

From: stan2020
it hovers over ashes but dont use. and infernal ashes

From: stan2020
THIS KEEP APPEARING WHEN I TRY TO RUN SCRIPT


Newer script version online!
Autoupdating to newer version.
[04:48:06] :: SECURITY WARNING :: Blocked URL 'http://ashamanaltars.googlecode.com/git/ashamanaltars.simba' was attempted to be accessed.
[04:48:06] :: SECURITY WARNING :: File in dir: C:\Simba\Scripts was attempted to be used.
New script downloaded to C:\Simba\Scripts\ScriptName V1.11 by User.simba!! Please use this one!!
Successfully executed.

From: ashaman88
What burner type do you have? What burner type do you have put in script? What is your house setup? Will you post a pic of it standing there when it can't find the burner? Thanks

From: newy1
Thanks for the reply I will PM you the screenshot but the setup is

RingType = 'Duel'; // Which type of ring are you using? (Duel,TzHaar)
AltarDirection = 's'; // Cardinal direction from entrance to where your altar room is (N,E,S,W)
HouseDesign = 'basicstone'; // House style (Zenev,BasicWood,BasicStone,Tropical)
BurnerType = 'Oak'; // Which type of burner do you have? (Oak,Mahogany,Marble)
AltarPlace = 'side';

From: ashaman88
ah just saw your pm, your burner type is marble not oak

From: mickdogg
yeah i get the same problem, teles to house ,stands there for a few seconds and then teles back to CW (repeat)

From: r3fer madnes
Everything sets up properly but when the bot teles to my house it dosen't know hot to open doors or something so it teles back to castle wars and then to the house and repeats.

From: r3fer madnes
Everything sets up properly but when the bot teles to my house it dosen't know hot to open doors or something so it teles back to castle wars and then to the house and repeats.

From: r3fer madnes
Everything sets up properly but when the bot teles to my house it dosen't know hot to open doors or something so it teles back to castle wars and then to the house and repeats.

From: yentaokia
'TOOK TOO LONG TO LIGHT BURNERS'
It doesn't even light the burners after reaching there :(

From: yentaokia
Here's the pic….

After that message appears, it will teleport back to castle war and repeat the same thing… Please help

From: yentaokia
RingType = 'duel';
AltarDirection = 'N';
HouseDesign = 'Tropical';
BurnerType = 'Incense';
AltarPlace = 'top';

From: yentaokia
Burner should be marble? I thought its incense burner? o.o

From: 90902
i got the same problem …
i did around 10 trips all worked well then he light 1 burner, stand in the middle and writes :
TOOK TOO LONG TO LIGHT BURNERS
then tele CW and then repeat it…
I wrote all good and my first 15 trips was great …
HELP PLEASE

=========Version: 1.11=========
Time Running: 2 Hours, 24 Minutes and 15 Seconds
Bones Used: 3612
Experience Earned: 663266
Experience/Hour: 275871
Bones/H: 1502
===============================

From: Koliantrix
got 95 prayer this morning, thanks so much for this script!! will definitely be using for 99 when i get the cash!

From: Firestarmc
This script is really good,thanks man :)

From: Simtoon

=========Version: 1.11=========
Time Running: 2 Hours, 24 Minutes and 15 Seconds
Bones Used: 3612
Experience Earned: 663266
Experience/Hour: 275871
Bones/H: 1502
===============================

Nice script mate :D

From: Aige
I'd like to thank you for the bot, I have been using it to learn how to script my own.

Also it got me 70-99 prayer

Thank you!

From: game2300
Hey,

when i open the bot it says "Error starting SMART, ensure the target page has an applet declaration"

do you know what is wrong, because all of the other bots work. i have tried almost everyting, did redownload the bot, logon rs with the browser, redownloaded java ect. i have the earlier of the prayerbots too but they wont work either.

From: yentaokia
Exception in Script: The given DTM Index[2] doesn't exist

From: MasterMike883
I got the bot working the first time. Came back to it being in the freaky forester random and unable to complete it. I did the random and left on my way.

Let the bot do its thing at the bank and when it teled into my house, it opened the door, lit both burners, selected a dragon bone and attempted to use it on the grass outside the house as well as on the pack on my yak and its horn.

After many shutdowns and restarts I got it working again. Hopefully it doesn't happen again.

From: speedypetey
uhhhhh I'm getting really frustrated with this script I've tried everything and nothing seems to work
Problems:
-bot lights the incense correctly only half of the time the other half it will click the 1st incense then quickly close the door and then will teleport back to CW
-bot rarely is able to use dragon bones on altar after lighting the incense; it will use dragon bones and when it moves towards the altar most of the time it will miss it and hover just to the left of the altar (on the floor) and end up clicking 'pray at the altar'
-if bot does light incense and uses dragon bones on altar will only offer half an inventory of bones before teleporting back to CW
(need help! have already lost 500k+ just trying to get it to run smoothly)

From: Prongs
Does this work on worlds where you can go to another persons altar or is this primarily for your own altar?

From: Sokkr7
Was also wondering the same!

From: Kraze
It's for your own altar (as far as I can tell.) The script currently requires you to tele into your own house, meaning that you won't be able to select a friend's house.

From: Kraze
I also seem to be having a problem where the bot won't withdraw another familiar and just continues running as it would without a familiar.

I'm currently running:

RingType = 'Duel';
AltarDirection = 'w';
HouseDesign = 'BasicStone';
BurnerType = 'marble';
AltarPlace = 'Top';

Using a terrorbird. (I have summoning potions in the same tab as well)

From: BernardoAlmeida
It won't summon my war tortoise. Don't know why. I start at cwars chest and it assume that I'm not using summoning, even when it has the pouches next to the bones. :/ Please help? Otherwise, great script!

From: ashaman88
Did you set PTS to the correct number when you were filling out the script?