SRL Archive - RS3 Outdated / Broken Scripts

Current Status

Leather works and gem crafting working

Gold Bar Crafting NOT working, will update with v 2.0

Longest proggie yet (by chrisman):


Making gold bracelets:
========YouJustGotCrafted==========
Time: 8 Hours, 43 Seconds
Items Total: 7112
XP: 177800
Items/h: 887
XP/h: 22191
Loads: 254
Loads/h: 31

Making rings of dueling:
Time: 3 Hours, 59 Minutes and 28 Seconds
Items Total: 2842
XP: 161170
Items/h: 712
XP/h: 40385

Making Gold Bracelets: Set to stop at 6000 items
=====YouJustGotCrafted==========
Time: 5 Hours, 24 Minutes and 12 Seconds
Items Total: 6020
XP: 150500
Items/h: 1114
XP/h: 27854
===================================

Cannonball:
Time: 5 Hours, 34 Minutes and 50 Seconds
Items Total: 10864
XP: 69300
Items/h: 1946
XP/h: 12418
^^6 hours past.

Golden Jewelery:
Time: 6 Hours, 2 Minutes and 22 Seconds
Items Total: 6580
XP: 164500
Items/h: 1120
XP/h: 28000
Loads: 236
Loads/h: 40

Time: 5 Hours, 47 Minutes and 40 Seconds
Items Total: 6160
XP: 154000
Items/h: 1063
XP/h: 26577
Loads: 222
Loads/h: 38


I have yet to see a problem running less than 6 hours unless stuck in a unsolvable random.

My 99:


ATTN: 1.16 for those experiencing sps walking problems (this does not include errors for SPS.simba), added 2 walking failsafes for your convenience. If experiencing problems, Post on thread or PM me.
1.15 is unstable 1.16 has furnace failsafe.

Please post all requested methods in the thread, I look at the thread and answer questions throughout the day.

Enjoy

Procedure Gempath;
begin
if whatarewedoing = 'Cutting' then
  case What of
    'Sapphire':
    begin
      Jewl := uncutsapphire;
      xpi := 50;
    end;
    'Emerald':
    begin
      Jewl := uncutemerald;
      xpi := 68;
    end;
    'Ruby':
    begin
      Jewl := uncutruby;
      xpi := 85;
    end;
    'Diamond':
    begin
      Jewl := uncutdiamond;
      xpi := 108;
    end;
  end;
  items := 28;
end;


Procedure Leatherpath;
begin
if whatarewedoing = 'Leather' then
  case What of
    'Red':
    begin
      Jewl := Redleather;
      case Item of
        'Chaps':
        begin
          MPoint := Point(353, 422);
          items := 13;
          xpi := 156;
        end;
        'Body':
        begin
          MPoint := Point(163, 427);
          items := 9;
          xpi := 234
        end;
        'Vambs':
        begin
          MPoint := Point(257, 427);
          items := 27;
          xpi := 78;
        end;
      end;
    end;

    'Black':
    begin
      Jewl := Blackleather;
      case Item of
        'Chaps':
        begin
          MPoint := Point(353, 422);
          items := 13;
          xpi := 172;
        end;
        'Body':
        begin
          MPoint := Point(163, 427);
          items := 9;
          xpi := 258;
        end;
        'Vambs':
        begin
          MPoint := Point(257, 427);
          items := 27;
          xpi := 86;
        end;
      end;
    end;

    'Blue':
    begin
      Jewl := BlueLeather;
      case Item of
        'Chaps':
        begin
          MPoint := Point(353, 422);
          items := 13;
          xpi := 140;
        end;
        'Body':
        begin
          MPoint := Point(163, 427);
          items := 9;
          xpi := 210;
        end;
        'Vambs':
        begin
          MPoint := Point(257, 427);
          items := 27;
          xpi := 70;
        end;
      end;
    end;

    'Green':
    begin
      Jewl := GreenLeather;
      case Item of
        'Chaps':
        begin
          MPoint := Point(353, 422);
          items := 13;
          xpi := 124;
        end;
        'Body':
        begin
          MPoint := Point(163, 427);
          items := 9;
          xpi := 186
        end;
        'Vambs':
        begin
          MPoint := Point(257, 427);
          items := 27;
          xpi := 62;
        end;
      end;
    end;
  end;
end;

Well i converted two of them to cases. you should follow that example to convert the rest.

You were missing

Jewl := Blackleather;

So i out it in as well as

if whatarewedoing = 'Leather' then

It looks nice, and i may test it to see how it runs, but until the cases are set i dont want to try to track through all of the if then statements

Since I know you plan on applying for members, I'll just say my opinions.

Your standards are way off, it made reading through it a little painful.

You c(sh)ould use cases instead of a bunch of if-thens of the same thing.

I would like to see some sort of radial-walk or DDTM walking/positioning, but it's not really needed.

Also, there a lot of tedious code, learn how to use arrays more effectively, I bet you could reduce your banking to one function.

Your setup could be made much more organized with the use of Arrays + Records, but not needed. I'll edit if I see anything else :)

Well i converted two of them to cases. you should follow that example to convert the rest.

Hey, thanks for the advice. I just set everything to cases. I will credit you for the advice!

From: Awkwardsaw
Since I know you plan on applying for members, I'll just say my opinions.

Your standards are way off, it made reading through it a little painful.

You c(sh)ould use cases instead of a bunch of if-thens of the same thing.

I would like to see some sort of radial-walk or DDTM walking/positioning, but it's not really needed.

Also, there a lot of tedious code, learn how to use arrays more effectively, I bet you could reduce your banking to one function.

Your setup could be made much more organized with the use of Arrays + Records, but not needed. I'll edit if I see anything else :)

Thank you for you advice! Yeah I understand what you mean. I separated bank to not make a single function so long and it helps me stay a bit more organized while changing something in a task. I am going to change Yo cases but don't really plan on making a single banking function but I might if it helps. Alot of the extra code are failsafes. For the walking, it's only a single click sps2 will be my best option. As for my standards =P yeah I know it's a bit messy, I rushed it. I never do this but I wanted opinions before applying. It'll be good when I'm done! The thing is, when I script my main priority is for the script to do the job, do it right, and do it humanlike. Thank you so much for the advice I will use them to improve my script! I hope to see you on the other side =P

Thanks guys!

i'll try this out, im looking to get 99 smithing on my pure, may make use of the cball smither and keep you posted with bugs and such

Neros, enjoy the script! Cannonball maker is only 13k xp/h but I guess if you want to make money too its a fairly good option. I hope you enjoy =)

yeah, i always choose to do methods that take longer but produce profit, got 99 crafting a while back on sapphire rings then alched them for 99 mage, which produced more profit ;)

ive noticed one slight problem, sometimes it confused as to whether your at the furnace or not, it stands next to the bank booth (the closed one) clicking the inv then the co-ord where the furnace would be, could just be lag but it's something to look into, other than that, i made 14k cballs overnight, could not get a proggy, but i'll get one today for you :P

0.0 clicking random coord? 0.o it doesn't click a co-ord until it finds the furnace, checks the text that says Furnace, clicks item, then clicks the furnace so that's not somethings thats even possible 0.0. Would you mind recording it next time?

Are you planning on applying for membership with this script? I think it really could make you get members status!!!

BTW your script is what first inspired me to decided to make my own. I'm starting on it tommorrow, hopefully I can make it good enough to get members.

I just submitted my application not 2 minutes ago before I saw this. ^.^ I hope you make a script 10x better than this! If you ever need help let me know!

From: punkd
0.0 clicking random coord? 0.o it doesn't click a co-ord until it finds the furnace, checks the text that says Furnace, clicks item, then clicks the furnace so that's not somethings thats even possible 0.0. Would you mind recording it next time?

yeah, i'll record if it happens again, ill try to explain more too, it's like sometimes after withdrawing steel bars it might misclick and ends off standing at the bank right clicking the bar then looking for the furnace. seems like it gets confused and thinks it's on the tile next to the furnace, im not sure why tbh. but yea i'll, try and get it on video lol :p

It doesn't withdraw the bars from the bank :(

Correction, it doesn't withdraw gold bars :(

Cannonballs works perfects though.

Make sure u set whatarewedoing to jewelry

Whoops thats my error, I'm not home ATM so I can't edit but move to the setdtm procedure and change "Jewelery" to "Jewelry"

hmmk, punkd i think i've worked out what was causing that banking problem

you know the tile closest to the wall in the bank spot where the script banks?
well i think that if you lag while banking and get moved to that spot then the script thinks the walking procedure has been completed thus making it search for the furnace
(which is obviously off-screen)

im basically standing to the left of the banker (near the clan cup plaque on the exterior of bank, but on the interior) clicking the steel bar then searching for the furnace, noticed it hovers on the grey part of the wall next to doors

im still not 100% sure why/whats causing and forgot to hypercam it again too lol, but once i disabled smart and moved to the furnace it continued working fine, that's why i think it could be the walking procedure, just my thoughts

Neros if u have time pm me a screenshot of where you stood.

Il post a 6hr proggy in 2 hours and 30 minutes!

Rather interesting to see more a smithing script then a crafting haha. I'll be testing this out tonight using the cannon balls. Thanks for the post!

From: Majnoon
Il post a 6hr proggy in 2 hours and 30 minutes!

I'll add it to the first post =P

From: Here2help
Rather interesting to see more a smithing script then a crafting haha. I'll be testing this out tonight using the cannon balls. Thanks for the post!

It's for crafting but cannonballs were a gift because I got 99 crafting using only my script =P. Im adding smithing, fletching in soon too =P. It'll be msi 2.0

I fell asleep behind my laptop :P sorry for the delay.

Time: 6 Hours, 2 Minutes and 22 Seconds
Items Total: 6580
XP: 164500
Items/h: 1120
XP/h: 28000
Loads: 236
Loads/h: 40

Il post some more later since i still have to do 93k gold bars

Won't withdraw any gold bars from bank? Am I missing something?

Tried

whatarewedoing := 'Jewelery'; //Read NFO above
What := 'Gold'; //Read NFO above
Item := 'Amulet'; //Read NFO above
Make := 25000; // How many items to make before it stops

And

whatarewedoing := 'Jewelry'; //Read NFO above
What := 'Gold'; //Read NFO above
Item := 'Amulet'; //Read NFO above
Make := 25000; // How many items to make before it stops

From: Mindset
Won't withdraw any gold bars from bank? Am I missing something?

Tried

whatarewedoing := 'Jewelery'; //Read NFO above
What := 'Gold'; //Read NFO above
Item := 'Amulet'; //Read NFO above
Make := 25000; // How many items to make before it stops

And

whatarewedoing := 'Jewelry'; //Read NFO above
What := 'Gold'; //Read NFO above
Item := 'Amulet'; //Read NFO above
Make := 25000; // How many items to make before it stops

Find the setdm procedure and change jewelery to jewelry

6 hours proggy.

Time: 5 Hours, 47 Minutes and 40 Seconds
Items Total: 6160
XP: 154000
Items/h: 1063
XP/h: 26577
Loads: 222
Loads/h: 38

Majnoon, have you had any problems similar to what neros is having

Not really

[Hint] C:\Simba\Includes\SRL/SRL/core/mapwalk.simba(1353:3): Variable 'BOX' never used at line 1352
[Error] C:\Simba\Includes\Sps/sps.simba(300:3): Unknown identifier 'SPS_FilterMinimap' at line 299
Compiling failed.
what happened?

Zero, update ur sps. Has nothing to do with my script.
And neros, you seem to be the only person experiencing the problem. Have you updated ur sps? Or could it be from the updated sps. alot of people are experiencing problems with sps 2

i did update it

Then the problem is with sps itself. Not my script

yeah i updated my sps when it got integrated with MSI, im about to do a good 6 hours on the 1.15 you put up for me :p i'll keep you posted

You just let me know if anything come up ^.^

will do ^_^

85-99 smithing on cballs so expect some large proggies lol

since this is one of the few with leather/cut support i recommend adding sw chest support, i will try it since im looking for 99 craft, if there arent many randoms i will use it has it is if there are some i will add sw bank support and might post it for you to add

Wister, I can very easily add soul wars. I chose not to because it's a higher ban rate. The purpose of my script is to be able to use crashsmart and leave the account botting for days without much worry of ban. It has antirandoms so Randoms arnt a problem. But if you use soul wars u have 50 % more chance of ban

For some odd reason, it withdraws the jewelry fine, then when it uses the gold bar on the furnace it just freezes there. I've tried gold rings, emerald rings, emerald bracelets, and other items but none of them seem to work. It uses the gold bar on the furnace, stops, waits a few seconds, and then clicks on the minimap next to the anvil again.

which version are you using

and make sure you have your color on brightest, and all molds in toolbelt

i dont believe its that much high since i got 2 99´s there, although it was a few month ago… and now jagex just cares about money thats why we havent heard of mass bans

yeah I know the recent sale but they still havnt stopped war against bots. Till thats over I dont want my script users getting banned ya know? Its for their sake otherwise adding soul wars isnt a problem at all.

So far, out of about 20 6 hour sessions only 2 or 3 failed because of a random. Otherwise the rest were all 6 hours

since yu are here just so you know your scipts is failing to compile in

[Error] C:\Simba\Includes\Sps/sps.simba(300:3): Unknown identifier 'SPS_FilterMinimap' at line 299
Compiling failed.

Thats not my script failing lol. Thats sps failing.

means sps needs adjustments

not in my script. SPS itself needs fixing. SPS2 was released and is still unstable. C0h3n is working on it. Posting a second version of 1.15 more stable.

gonna test 1.16 for you now :p

as always, i'll keep you posted

can u add AK furnace ? to f2p

Let me know if it gives any problems neros and catando, I dnt plan on releasing al kharid

Just had a look through, epic script man!

For some reason the bot just stands there, clicks on the compass and then just logs out. im running on sps 1 because sps 2 is so unstable. Any ideas?

@putonajonny thanks ^.^ enjoy!

@who23 Make sure you setup the script correctly as instructions state, on brightest use version 1.6 for best results 1.5 isn't setup correctly.. Your using old sps shouldn't be a problem.make sure all items needed are visible in bank

Have made about 60k bracelets, 340k left!

short proggy for now :P


========YouJustGotCrafted==========
Time: 2 Hours, 29 Minutes and 49 Seconds
Items Total: 4032
XP: 28224
Items/h: 1614
XP/h: 11303
Loads: 36
Loads/h: 14

Nice majnoon! Glad to know it's working good for you. And neros. I don't like your proggy. It should be doing 2k/h at 13k xp p/h. Why is it so slow

i've been on minecraft with 2gb ram dedicated to it as well as running simba, i think it's my fault not yours ;)

Ahh, explains much =]

Other versions are bugged, version 1 works great.

Majnoon, first version had hundreds of hours of testing the newer had only a couple 6 hour sessions.

v 1.16 works like charm if we downgrade to sps 1

Wister it works with sps2 also u just have to edit out a part in sps.simba

From: punkd
Wister it works with sps2 also u just have to edit out a part in sps.simba

Could you tell us which part to edit out? Or is it going to be an amazing anti-leech?

I forgot :P n I'm not home to check it

Great script loving it!

only slight downfall is it takes 2-3 minutes to find furnace and to find the bank but for a free script its amzing 900 bars per hour average :D

Crafting Gold Braclets.

Enjoy. U must be lagging or have rs setup incorrectly because it should be doing 1100 average p/h

Its not lagging im watching it i dno it just seems to stand at furance for 1-2 mins then bank what are the correct settings brightness is on 100%

Keep An on it next time and show me which tile your char stands on

Whats an? i dont see an option for this.

Keep an eye*

========YouJustGotCrafted==========
Time: 6 Hours, 3 Minutes and 23 Seconds
Items Total: 5517
XP: 1026162
Items/h: 910
XP/h: -27555
Loads: 613
Loads/h: 101

Take this! great proggie, finally made it for 6hrs, it was always getting an unsolveable random :/

What are u crafting with this proggy?

green leather bodys

Using this to cut the 140K Sapphires I just finished buying! Changed it up to work with the Soul Wars chest, but it's running flawless!

Kyle I havnt tested gem cutting for more than an hour so =P if it fails let me know what done wrong

It's still going strong!

========YouJustGotCrafted==========
Time: 1 Hours, 14 Minutes and 50 Seconds
Items Total: 4480
XP: 224000
Items/h: 3591
XP/h: 179599
Loads: 160
Loads/h: 128

:D yay me

From: punkd
:D yay me

The only thing I can see that's wrong is the xp/hr reporting :p It's still going :)

========YouJustGotCrafted==========
Time: 3 Hours, 44 Minutes and 4 Seconds
Items Total: 13496
XP: 674800
Items/h: 3613
XP/h: -138774
Loads: 482
Loads/h: 129

Any ideas why it's displaying that way? 0.o

Looks to be an issue with the math. It's going down over time.

========YouJustGotCrafted==========
Time: 5 Hours, 14 Minutes and 28 Seconds
Items Total: 18956
XP: 947800
Items/h: 3616
XP/h: -46792
Loads: 677
Loads/h: 129

Full 6 hour report, shweet!

========YouJustGotCrafted==========
Time: 6 Hours, 44 Seconds
Items Total: 21756
XP: 1087800
Items/h: 3618
XP/h: -17505
Loads: 777
Loads/h: 129

Do you know when you will be or if you will be adding alk-kharid f2p crafting support?

From: Kyle Undefined
Looks to be an issue with the math. It's going down over time.

========YouJustGotCrafted==========
Time: 5 Hours, 14 Minutes and 28 Seconds
Items Total: 18956
XP: 947800
Items/h: 3616
XP/h: -46792
Loads: 677
Loads/h: 129

Full 6 hour report, shweet!

========YouJustGotCrafted==========
Time: 6 Hours, 44 Seconds
Items Total: 21756
XP: 1087800
Items/h: 3618
XP/h: -17505
Loads: 777
Loads/h: 129

Nice Kyle! Looks like it's workin great!

From: chrisman
Do you know when you will be or if you will be adding alk-kharid f2p crafting support?

Chrisman, I don't plan on releasing f2p support. Gold farmers abuse it too much.

Yup! It's still cutting like a boss :)

http://www.freeimagehosting.net/g6tmt

This image highlights the places where the script offtently stands and ends up standing untill it automaticaly logs off and on the mini map i have placed a black dot also where it stands alot of the time and does the same.

Here's another short one, this time, without minecraft lol

Progress Report:

========YouJustGotCrafted==========
Time: 29 Minutes and 45 Seconds
Items Total: 896
XP: 6272
Items/h: 1807
XP/h: 12649
Loads: 8
Loads/h: 16

there's that magical 1800+ :D

From: Kyle Undefined
Yup! It's still cutting like a boss :)

Awesome ;) =P kyleeeee!!! Vote yes on my application! K thanks =D

From: chrisman
http://www.freeimagehosting.net/g6tmt

This image highlights the places where the script offtently stands and ends up standing untill it automaticaly logs off and on the mini map i have placed a black dot also where it stands alot of the time and does the same.

Chrisman thanks for the pic I'll look into that!

From: Neros
Here's another short one, this time, without minecraft lol

Progress Report:

========YouJustGotCrafted==========
Time: 29 Minutes and 45 Seconds
Items Total: 896
XP: 6272
Items/h: 1807
XP/h: 12649
Loads: 8
Loads/h: 16

there's that magical 1800+ :D

Sweet bra but it's still not the number I'd Like! I get 2k/h with 13k xp

Hey great script :D

The only trouble i have is that, when running to the smith, it almost always clicks a little too far, making me run outside of the building, then click again and i run just inside. looks really botlike due to how long it takes to re-click and get closet to the furnace.

and even when it does get you inside the building on the first click, it still clicks again in the same spot… the long pausing make it seem really bot like…

really good though :D

0.o sps version?

sps was fully up to date at 984, and i double checked everything to make it was all up to date

From: yespippy
Hey great script :D

The only trouble i have is that, when running to the smith, it almost always clicks a little too far, making me run outside of the building, then click again and i run just inside. looks really botlike due to how long it takes to re-click and get closet to the furnace.

and even when it does get you inside the building on the first click, it still clicks again in the same spot… the long pausing make it seem really bot like…

really good though :D

This is the problem im having.

========YouJustGotCrafted==========
Time: 6 Hours, 22 Minutes and 18 Seconds
Items Total: 5292
XP: 132300
Items/h: 830
XP/h: 20763
Loads: 190
Loads/h: 29


Only proggy that has worked so far fully but still had to do stuff myself at some points.

other than that thanks!

emerald bracelet is not working

That's quite interesting. Works for everyone else.

Withdrawed gold bars but doesn't walk to the furnace, just stands in bank.

I'm using the old SPS, version 1.16, making/wanna make gold bracelets. :s

Make sure ur using script version 1.16 and setup correctly.

Yes I'm sure I'm using 1.16, is this setup correct or did I miss anything?

whatarewedoing := 'Jewelry'; //Read NFO above
What := 'Gold'; //Read NFO above
Item := 'Bracelet'; //Read NFO above
Make := 7000; // How many items to make before it stops

From: newy1
Yes I'm sure I'm using 1.16, is this setup correct or did I miss anything?

whatarewedoing := 'Jewelry'; //Read NFO above
What := 'Gold'; //Read NFO above
Item := 'Bracelet'; //Read NFO above
Make := 7000; // How many items to make before it stops

Edit:

Tried again, it did 1 load and not walking back to bank now, lol.

when it makes emerald bracelets it waits 5-10 sec before it use it on the funance

Why are you calling this AIO, it doesn't even support urns..

From: Kyle Undefined
Looks to be an issue with the math. It's going down over time.

========YouJustGotCrafted==========
Time: 5 Hours, 14 Minutes and 28 Seconds
Items Total: 18956
XP: 947800
Items/h: 3616
XP/h: -46792
Loads: 677
Loads/h: 129

Full 6 hour report, shweet!

========YouJustGotCrafted==========
Time: 6 Hours, 44 Seconds
Items Total: 21756
XP: 1087800
Items/h: 3618
XP/h: -17505
Loads: 777
Loads/h: 129

ive noticed that happens when we lvl up, after that it starts to subtract instead of making the sum

From: zerololol
[Hint] C:\Simba\Includes\SRL/SRL/core/mapwalk.simba(1353:3): Variable 'BOX' never used at line 1352
[Error] C:\Simba\Includes\Sps/sps.simba(300:3): Unknown identifier 'SPS_FilterMinimap' at line 299
Compiling failed.
what happened?

downgrade your SPS

From: xtrapsp
downgrade your SPS

You've saved the day!

From: wister1
ive noticed that happens when we lvl up, after that it starts to subtract instead of making the sum

Well I've been at higher crafting lvls so I never dealt with leveling.

From: largovich
Why are you calling this AIO, it doesn't even support urns..

Because it does support urns. Dontcha know?

From: haid123
when it makes emerald bracelets it waits 5-10 sec before it use it on the funance

Pst, that's cuz I made it like that =O

From: newy1
Edit:

Tried again, it did 1 load and not walking back to bank now, lol.

Your not following instructions. Java client safe mode, min detain , brightness highest? Sps functioning? Your doing at least 2 things wrong

You should realy do a quick phew prnt screens and put em on the thread start for all the settings cause i have everthing you puta nd it still stands at diff spots in bank and does nothing.

i left it for an hour and it made no bars stood in the same place.

I don't have control over sps, but something tells me that when I go home and start the script it's going to work. So until then =P

Hey! Cut all my gems perfectly and I got to 93 crafting :) It works amazing well! :D

From: Kyle Undefined
Hey! Cut all my gems perfectly and I got to 93 crafting :) It works amazing well! :D

180k Gems so quick? nice

It was 140k gems, and it was averaging almost 4k gems an hour :p

I hope you enjoyed it =). Rep plus would be appreciated !!=D

From: punkd




Because it does support urns. Dontcha know?

What it does:
Crafts all Jewelery (Gold - Diamond)
Crafts Leather items (Green Dhide - Black Dhide)
Cuts Gems (Sapphire - Diamond)
And a surprise, Cannonball maker. (Gift for getting 99 craft today(4-10-12)

All Instructions are in the script. Read the NFO before you change anything. ITS THERE FOR A REASON!!

* I don't see any feature that it can make urns..? Can you explain where I can see that?

you can see that when I don't feel like your leeching and read the whole thread

XP/h: 23196 for gold bracelets :P

Thats pretty bad actually , should be like 30k xp/h

Yeh it shud jal but it keeps loosing the furnace and the bank. :(

Chrisman,jal, I tested today when I got back and it seems to be a sps problem. It won't move ill update the co-ords in the next few hours

From: punkd
you can see that when I don't feel like your leeching and read the whole thread

I did read the whole thread..

If you read the whole thread you'd see there are still features being added.

Yea but then it isn't yet an AIO script.. And it doesn't support urns ATM..

From: largovich
Yea but then it isn't yet an AIO script.. And it doesn't support urns ATM..

stop complaining and enjoy this good free script or do one by yourself…

on topic 98 w00t, gonna get 99 today for sure, been doing green leather bodys, averaging 170k/hr, thanks, when i get 99 you sure deserve plus rep :p

Largo, just stop whining…. Seriously. And Wister, congrats. Hope you enjoyed crafting ^.^

From: punkd
Chrisman,jal, I tested today when I got back and it seems to be a sps problem. It won't move ill update the co-ords in the next few hours

Cheers mate what will i have to do to fix this?

THANKS for the reply!

Not much other than wait bro. Give it some time :)

Time is of the essence lol im gona have to find a f2p one members runs out in 3 days and i have 390k gold bars to make into braclets.

Yeah sorry Chris, just been really busy with work school and real life if u know what mean. I'll keep an update ready for it in a bit.

Cheers i need to find a f2p alkarid gold amulet maker now :(

From: Kyle Undefined
It was 140k gems, and it was averaging almost 4k gems an hour :p

which gems were you cutting out of interest?

99 yay :D

Great script thanks for release!
I do have a suggestion… add flax spinning.

From: chrisman
Cheers i need to find a f2p alkarid gold amulet maker now :(

chris, SPS seems to be working fine, If your having furnace finding problems, use 1.17 (just released) and youll be good.

From: ashihtaka
which gems were you cutting out of interest?

He was cutting sapphire.

From: wister1
99 yay :D

Congrats bro! I hope you enjoyed!

From: jfishy
Great script thanks for release!
I do have a suggestion… add flax spinning.

Soon enough it will have everything!

SPS is up to date and still it has problems and its not lagging its super fast but it always seems to be so fast it misclicks the tiles that i sent to you marked on my screen.

does this work at soul wars?

Chrisman, I dnt control sps and gems no, only edgeville

wont even withdraw gold bars not sure why

Setup the script right?

[Error] C:\Simba\Includes\SRL/SRL/core/text.simba(687:13): Unknown identifier 'UpChars' at line 686
Compiling failed.

Result := True; Line –^ 686


[Error] (328:34): Invalid number of parameters at line 327
Compiling failed.

Text := Replace(Text, '?', '.'); Line 327 –^

Never had an error compiling before havent changed anthing at all.








Didnt have latest version of script.

Correction to all above i dont know what you did but it just totaly fails now for gold bars 5-6 runs from bank to furnace before it actauyl withdraws the bars and then it decides withdraw them 10-15 times and put them back again.

Because my script is a fail!

It just seems to work when it wants o well atleast the diamond necklace maker is flawless.

I'm looking into most problems now.

I have a rather odd problem. When it goes to walk to the furnace it gets there and then clicks again to walk there. It's reall not a big deal but id does eat up some time and since it does it every time it just looks odd. I think it is cause by my laggy computer. What should i change in the script to correct this?

No it's not you, it was me rushing it. I'm going to fix it in 2.0 along with new features

Tbh its works flawlesly making all jewlery but when it makes gold braclets it just epic fails lol any way i can help?

also never miscliks when making jewlery only gold braclets where it clicks outside furnace and random spots in bank.

Script wont work at all now keep getting hundreds of lines with this error


The automatically split character are to wide. try decreasing minspacing

I have no idea what the problem is for that last error. I doubt its from the script tho.

Ill keep using for as long as i can and hope for a good outcome.

Sounds great mmmkkkkrrfy

Longest Progress Report Since Relase That Didnt Log Out Or Fail!

========YouJustGotCrafted==========
Time: 8 Hours, 43 Seconds
Items Total: 7112
XP: 177800
Items/h: 887
XP/h: 22191
Loads: 254
Loads/h: 31

How did u get past 6 hours?

Dont ask mate i dont have a clue i just left it and came back and it was still running lol.

Put it in progress report. :D

Hmm interesting. I will buddy! I'm on my phone atm.

From: punkd
How did u get past 6 hours?

There are random points in time when rs doesn't make you log off. I've had 3 in total but my friends who has botted longer than me has had none. I have no idea why this actually happens though….

It doesn't smelt the gold bars and ruby. DAM CRAFTING

From: juunhoad
It doesn't smelt the gold bars and ruby. DAM CRAFTING

Do you get an error message when you use the script? If so could you please post it?

From: Thanatos
Do you get an error message when you use the script? If so could you please post it?

Don't get any error, it was working fine for sapphire

EDIT: I do the exact same thing for sapphire and it works, when I want to do ruby it just doesn't make them. It withdraw it and walks to the furnance, but doesn't make ruby amulets.

Hmm, do you have the mold in your toolbelt? You need to be a bit more detailed for me to help you :/

Post for me your setup

From: punkd
Hmm, do you have the mold in your toolbelt? You need to be a bit more detailed for me to help you :/

Hmm and now it made the amulets 1 time and doesn't go back to bank, well I don't know what details I need to give you. Gonna do sapphire now, hope that will work all the time!

MY BRAIN IS FULL OF FUCK NOW

It's a rs setup. Def not from rubies themselves. Make sure rs is on safemode and brightness is highest in the client.

From: punkd
It's a rs setup. Def not from rubies themselves. Make sure rs is on safemode and brightness is highest in the client.

Already have that and min graphics

Not sure, version your using? Srl, simba, sps updated?

Punked do you ever check your inbox =p?

Yeah why 0.o

dont forget to add my 8 hours proggy i think i have another one on its way also.

50k Green dhides to test this with, I'll let you know if anything goes wrong!

Currently:
========YouJustGotCrafted==========
Time: 31 Minutes and 12 Seconds
Items Total: 468
XP: 87048
Items/h: 900
XP/h: 167400
Loads: 52
Loads/h: 100

W.e happened to this script in your update or something happened easly getting 1k per hour now. :D

Interested. Post proggies for us and chrisman, glad your taking advantage of the script =P

Will do :D did u add my 8 hours?

Yes chrisman, added to the list

From: punkd
Yeah why 0.o

I pmed you asking how you are getting on with the script i told you about =p

Ohhh, I skimmed to the end of the pm lolll I thought u were talking about this script and I'll get back to u on that

I think somethings wrong with my laggy computer since I haven't seen anyone post the problem I have…..When there is another player using the stupid fruitbat and not picking up all of the fruit the bot just withdraws and deposites or, never walking to the furnace. It also doesn't give an error report. Damn fruitbats……

Lol I doubt it's fruitbats but then again who knows

Having a phew problems with the script saying that its made all the gold braclets i have 190k gold bars and its stopping after 1 load. Any ideas?

Maybe you put a number in loads to make?

I put in 190000 which is the 190k bars i have.

Don't put any numbers leave it blank. It's not like it was going to make that many in one attempt anyway.

It would be nice if you added port phasmatys as a location, because you can smith cannonballs 2x faster.

Maybe In a future update :)

simba can handle all random events?? I am just curious, cause it will directly affect the bot.

Only 2 are currently not working from what I remember

Make := 0; // How many items to make before it stops And are you sure this is correct cant you update it so it just makes them till it runs out of bars?


Freaky forester dosent work

It gets it and logs straight out lol.

Put nothing. It's not gna do 190k bars in 6 hours

I put nothing in it and it dosent make any it starts logs in logs out says all bars done.

Hmm I'll tell u the line to change in the script later when im by my computer.

I need you to help me change that line so it just keeps making bars.

Chris, I need you to record it in order for me to diagnose the problem. It could be a few reasons. Not just that single line

Ill tell you what it does cant record it


Logs in opens bank on tab with only gold bars and braclets logs out and says no gold bars left to craft i have 4k in the how many to make.

Script version? Also make sure it's not the first item in the tab

its seccond item in the tab latest version.

It doesn't detect gold bars. I'll look over it tonight

Cheers.

Downloaded, soulwars support added - making green d'hide bodies, will post proggy since there is none that I saw for leathers

Enjoy, testing spinner addition.

========YouJustGotCrafted==========
Time: 3 Hours, 10 Minutes and 1 Seconds
Items Total: 3186
XP: 592596
Items/h: 1006
XP/h: 187119
Loads: 354
Loads/h: 111

I did this at soulwars bank using your script. I sped the banking process up slightly so the delay after every left click was far less noticeable. The bot was entirely stable when I stopped it, but I went to ge to update my offers/collect items.

Nice, nice. Well soul wars is left click should be quicker.

Left the script making gold braclets last night and it ran flawlesly 1k per hour for 5 hours.

I thought u said it didn't work -_-

Excellent script, got me over 1m crafting xp first run :)

EDIT: Also I changed the wait times to about 1/3 of what you had set. My computer runs pretty laglessly, so there's no need to have the script wait so long during banking and crafting etc.

EDIT EDIT: How can I get it to run at soul wars though? I am new to scripting :o

One thing to do with this would be as pure wrecked said and third the time it takes from taking the bars from the bank and going to the furnace also why does the smart window keep popping up over my screen?

chrisman: That's an easy thing to do, if you scroll down and find the procedure you're using (ie. Leatherworker etc) and reduce all the wait times to below 500 it should speed it all up for you, while still running smoothly.

If you lagg a bit then you might want to consider slightly longer wait times so the script doesn't miss anything.


EDIT: Can someone please help me editing the script so I can work at soulwars?

Pure, I don't recommend you get soul wars added but if you really want it I've made it as easy as it possibly can be to add it. Read some tutorials.

Erm punkd could you tell me how to do that thing i asked i dont understand pure. lol

From: punkd
Pure, I don't recommend you get soul wars added but if you really want it I've made it as easy as it possibly can be to add it. Read some tutorials.

Why don't you recommend it? No randoms and 1 click bank :D

If you can tell me why not to do it I'll just leave it - already gotten 2mil exp today from the script so it's not such a big deal :)

chrisman, Im not sure, you mustve done something?

pure: because soul wars is ban mania. everyone bots there, one of the first spots jagex checks for bots.

@Chrisman

If you want the script not to take as much breaks in between actions you need to speed up the wait times:

ie
wait(1500)

tells the script to wait 1.5seconds which is unnecessary as far as my computer is concerned so I would change it to

wait(300)

giving runescape 0.3 seconds to process the last command and then moving immediately on.


@Punkd

Is there a reason for telling it to face north with compass twice when script starts?
I have just removed one for the time being, no problems noticed so far.

when logging in, it sometimes clicks it before its fully logged in, glitch in srl. So I doubled it, no harm done anyway.

I know how to change it but were do i change it what line?

Problem: I was observing my client create cannonballs and about 1800 in it started only making 8-28 cballs a load.
No other problems.
Great success making emerald rings, made 1000 no error. Pretty quick.

I'll try and get some proggys up.

Ban Mania is not really a good thing to look @ tbh, Jagex focuses on money bots long before they attack a "player" so to speak. Also, my friend runs an army of bots and suicide bots, has yet to lose a single bot to a ban, when optimus is released, they may do rollbacks, but I wouldnt be worried about getting banned @ soulwars VS anywhere else. I would recomend teleing from soulwars and running back every few hours and do the random as fast as possible though.

Grats on Member!

Another question: How can I modify this to work with Sacred Clay Needles

I changed the xp amount and items per load but I think that's just for proggy purposes anyway, I set SC Needle as default to be used but when it tries to craft a body it very quickly clicks the d leather again and then after about 6 seconds it banks.

From: Nicklaus
Ban Mania is not really a good thing to look @ tbh, Jagex focuses on money bots long before they attack a "player" so to speak. Also, my friend runs an army of bots and suicide bots, has yet to lose a single bot to a ban, when optimus is released, they may do rollbacks, but I wouldnt be worried about getting banned @ soulwars VS anywhere else. I would recomend teleing from soulwars and running back every few hours and do the random as fast as possible though.

Well, I wouldn't want my script To be the reason ya know? Plus consider it a antileech, for those who really want soul wars the could learn and add it themselves.

Idk Maybe in the future I will but for now I don't think it's in my list

From: Kyle Undefined
Grats on Member!

Thank you Kyle but old timer was a bit unexpected!

From: Pure Wrecked
Another question: How can I modify this to work with Sacred Clay Needles

I changed the xp amount and items per load but I think that's just for proggy purposes anyway, I set SC Needle as default to be used but when it tries to craft a body it very quickly clicks the d leather again and then after about 6 seconds it banks.

I don't have an account to test sacred with. If someone could supply me I would add sacred crafting also.

From: punkd
Well, I wouldn't want my script To be the reason ya know? Plus consider it a antileech, for those who really want soul wars the could learn and add it themselves.

Idk Maybe in the future I will but for now I don't think it's in my list



Thank you Kyle but old timer was a bit unexpected!



I don't have an account to test sacred with. If someone could supply me I would add sacred crafting also.

I can try and get some on one of my alt accounts. I do not share my mains details tho 2300+ total 4b+ bank etc etc :L

Theoretically it should work fine? I mean, it does everything the same except every few invents I'd just have to manually withdraw a few new needles…just for some weird reason itbod clicks to make bodies and then jumps straight back up to the leather and tries again

I wouldn't share one like it eIther buddy =P let me know

========YouJustGotCrafted==========
Time: 5 Hours, 59 Minutes and 19 Seconds
Items Total: 5850
XP: 1088100
Items/h: 976
XP/h: -17524
Loads: 650
Loads/h: 108

^^ nice ill add that to the first page

Hi. Does this crafting AIO script support soul wars banking ATM? Thanks in advance.

Nope, may add it if enough requests

Hmm.. i personally find soul wars bank chest better as there are no randoms there which is better since my simba client at the moment is solving no randoms. :O

Add soul wars bank.

[Hint] C:\Simba\Includes\SRL/SRL/core/mapwalk.simba(1353:3): Variable 'BOX' never used at line 1352
[Error] C:\Simba\Includes\Sps/sps.simba(300:3): Unknown identifier 'SPS_FilterMinimap' at line 299
Compiling failed.

From: starrychelx
Hmm.. i personally find soul wars bank chest better as there are no randoms there which is better since my simba client at the moment is solving no randoms. :O

I promise they'll fix it!

From: G R E E N
[Hint] C:\Simba\Includes\SRL/SRL/core/mapwalk.simba(1353:3): Variable 'BOX' never used at line 1352
[Error] C:\Simba\Includes\Sps/sps.simba(300:3): Unknown identifier 'SPS_FilterMinimap' at line 299
Compiling failed.

Sps error not my script. There are guide to fixing it or wait for a srl update

Small Proggy:

========YouJustGotCrafted==========
Time: 1 Hours, 30 Minutes and 54 Seconds
Items Total: 1791
XP: 376110
Items/h: 1182
XP/h: 248257
Loads: 199
Loads/h: 131
Successfully executed.

Mine still has problems walking to the furnace in edgeville but im gonna try and fix it myself. Grats on members!!!!!!!!

Thantos, I can't diagnose the problem unless I experience it. It works fine for me and I'm stuck at bs spinning so it might be a while till the update

From: punkd
Thantos, I can't diagnose the problem unless I experience it. It works fine for me and I'm stuck at bs spinning so it might be a while till the update

It only happens on rare occasions. It's probably because I'm using a horrible computer and with linux WINE sometimes causes me to have problems.

Nice script. When I make gold bracelets sometimes it will sit at bank and keep withdrawing gold bars and redepositing, any help ?

From: Thanatos
It only happens on rare occasions. It's probably because I'm using a horrible computer and with linux WINE sometimes causes me to have problems.

Your most Likely lagging and script thinks your at bank.

From: rsfan123
Nice script. When I make gold bracelets sometimes it will sit at bank and keep withdrawing gold bars and redepositing, any help ?

Raise smart frame rate to highest your lagging. Frame rate bar is on the side of Smart rs client.

I raised the frame rate bar to the highest it goes, I'll post back if I have problems.

========YouJustGotCrafted==========
Time: 2 Hours, 36 Minutes and 31 Seconds
Items Total: 1988
XP: 49700
Items/h: 762
XP/h: 19052
Loads: 71
Loads/h: 27

From the proggy bar I can tell your lagging. Avg xp/h for most people is 23k-25k with 900-1000 made p/h

Quality.

add al-kharid?

Hello, I was trying to use this and it works sometimes and just fails halfway through. I know I'm not on the best of computers and was lagging, some things I picked up:

When it right clicks the banker, it doesn't click bank, and therefore it keeps hovering the banker yet the menu is open. It should move the mouse out of the way so it can close the menu and try again.

It keeps depositing the actual stuff I'm trying to craft with, so if I have 14 gold bars and 14 emeralds, it deposits them and tries to take them out again.

Also, it sometimes cant seem to figure out what are the materials needed to withdraw from bank

Your lagging, it waits a certain amount and checks if the items arnt in the inv before the time is up it resets. That's for everything you mentioned

Working well for me, thanks :)

========YouJustGotCrafted==========
Time: 2 Hours, 30 Minutes and 24 Seconds
Items Total: 2632
XP: 65800
Items/h: 1050
XP/h: 26250
Loads: 94
Loads/h: 37

you got a hella fast piece of equipment

When Im doing sapphire jewllery it does withdraw the sapphire.

After it closes the bank, it stays in the same spot for like 20 seconds

i Dont know why, but when my session is ended ( 6 hrs ) it doesn't do anything..
Could these be settings or a script bug?
Please help me.

add al-kharid ?

From: yl10yl10
When Im doing sapphire jewllery it does withdraw the sapphire.

After it closes the bank, it stays in the same spot for like 20 seconds

Hmm, more details please? step by step on what it does

From: TechnologyZ
i Dont know why, but when my session is ended ( 6 hrs ) it doesn't do anything..
Could these be settings or a script bug?
Please help me.

its not supposed to do anything else. Once ur 6 hours are over u have to manually close smart and restart

From: noapologies
add al-kharid ?

no?

hmm seems to be working good i just got back from holiday.

I bought 20k gold bars to test this out will post proggy later, script is running well at the moment and good luck on the members, I will be learning from this script an others to hopefully get to a point where I can script :)

From: Pure Wrecked
Small Proggy:

What are you crafting to get that kind of exp p/h

For the cannonball smither, I start the script at edgeville. It opens up the bank and then does not do anything. Any suggestions?

From: xXAlfaMaleXx
I bought 20k gold bars to test this out will post proggy later, script is running well at the moment and good luck on the members, I will be learning from this script an others to hopefully get to a point where I can script :)

I got members, and best of luck to you! Enjoy!

From: I Bot Phats
For the cannonball smither, I start the script at edgeville. It opens up the bank and then does not do anything. Any suggestions?

What is your setup?

Edit: nvm no issues anymore. Fixed it myself.

why not adding al-kharid?

From: punkd
What is your setup?

Have ammo mould in toolbelt as well as in bank(visible) , have my steel bars in visible bank slot and in edgeville. Please let me know if there is anything else that I could try


EDIT: I figured it out! Seems to be working now thanks! :)

EDIT 2: It ran for one load and then stood in the bank withdrawing and depositing steel bars continuously :S

From: I Bot Phats
Have ammo mould in toolbelt as well as in bank(visible) , have my steel bars in visible bank slot and in edgeville. Please let me know if there is anything else that I could try


EDIT: I figured it out! Seems to be working now thanks! :)

EDIT 2: It ran for one load and then stood in the bank withdrawing and depositing steel bars continuously :S

Make sure steel bar is not the first item in the bank tab and cannonball is in the same tab. make sure you setup the declare players correctly in the script as said in instructions within the script. Your lagging is causing the withdraw deposit problem. You can raise the frame rate bar on the side of smart to speed it up a bit. If it doesn't help close some applications. If that doesn't help either edit wait time for withdrawing or use a faster comp.

========YouJustGotCrafted==========
Time: 6 Hours, 1 Minutes and 23 Seconds
Items Total: 6328
XP: 158200
Items/h: 1050
XP/h: 26265
Loads: 226
Loads/h: 37

Absolutely beautiful, so glad I made the switch from powerbot!

Glad u like it :)

didn't realise CB's weren't crafting… but meh it'l make some $$

Thanks :)

Cannonballs are smithing but it was just a gift for my 99 crafting

any1 have a proggy for doing blue dhide bodies? or green :/

some on front page. look for ones with ~900 items p/h and high 1m xp total gained

i dont see any progies but u say about 900 bodies/hr?

========YouJustGotCrafted==========
Time: 31 Minutes and 12 Seconds
Items Total: 468
XP: 87048
Items/h: 900
XP/h: 167400
Loads: 52
Loads/h: 100

========YouJustGotCrafted==========
Time: 3 Hours, 10 Minutes and 1 Seconds
Items Total: 3186
XP: 592596
Items/h: 1006
XP/h: 187119
Loads: 354
Loads/h: 111

2 for you, they didnt meantion what they were crafting though

why no soul wars bank -_-

make alkharid bank ???

From: noapologies
make alkharid bank ???

Just do the easy tasks for varr it doesn't take long I think I finished them in about an hour, and the exp p/h is better at edgev

========YouJustGotCrafted==========
Time: 19 Minutes and 58 Seconds
Items Total: 189
XP: 35154
Items/h: 567
XP/h: 105638
Loads: 21
Loads/h: 63

and still going up..thinking itll peak at 125k xp/hr doing green bods

FLAWLESS MAN but only flaw really is after it does a random event, the loot stays in invo and messes up load.. like there'll be 2 leftover hides when the 3rd hide for the last body cant be withdrawn cuz nats or something stuck in ur invo from random

From: snowver
========YouJustGotCrafted==========
Time: 19 Minutes and 58 Seconds
Items Total: 189
XP: 35154
Items/h: 567
XP/h: 105638
Loads: 21
Loads/h: 63

and still going up..thinking itll peak at 125k xp/hr doing green bods

FLAWLESS MAN but only flaw really is after it does a random event, the loot stays in invo and messes up load.. like there'll be 2 leftover hides when the 3rd hide for the last body cant be withdrawn cuz nats or something stuck in ur invo from random

There's not really much he could do about that. The rewards are too random to bank them after an event. And "It's flawless!- except for…' = not flawless. Personally this is a superb script.
Great job Punk'd! I definitely think urn support would be nice!!!
PS. I'm currently working on a crafting guild urn maker, would you like to see my procedure for it? (you can also wait a week or 2 and it'll be out)

Holy baloney this script is fast :-P I was using it to craft a few blue d'hide bodies…

Any who this script is nails man great job!

========YouJustGotCrafted==========
Time: 9 Minutes and 25 Seconds
Items Total: 108
XP: 22680
Items/h: 688
XP/h: 144509
Loads: 12
Loads/h: 76

LMBO "I guess were out of leather"

========YouJustGotCrafted==========
Time: 16 Minutes and 24 Seconds
Items Total: 198
XP: 41580
Items/h: 724
XP/h: 152121
Loads: 22
Loads/h: 80
I guess were out of leather

From: snowver
========YouJustGotCrafted==========
Time: 19 Minutes and 58 Seconds
Items Total: 189
XP: 35154
Items/h: 567
XP/h: 105638
Loads: 21
Loads/h: 63

and still going up..thinking itll peak at 125k xp/hr doing green bods

FLAWLESS MAN but only flaw really is after it does a random event, the loot stays in invo and messes up load.. like there'll be 2 leftover hides when the 3rd hide for the last body cant be withdrawn cuz nats or something stuck in ur invo from random

I would recommend getting the GP, You can also learn some scripting and add soul wars for no random botting. Your Items/h are slow, you must be lagging, I get 1k items/h but then again I have a i7.

From: JOEbot
There's not really much he could do about that. The rewards are too random to bank them after an event. And "It's flawless!- except for…' = not flawless. Personally this is a superb script.
Great job Punk'd! I definitely think urn support would be nice!!!
PS. I'm currently working on a crafting guild urn maker, would you like to see my procedure for it? (you can also wait a week or 2 and it'll be out)

Thanks joe, but to be honest its really a problem with the randoms system because I have no control of what item I recieve. At the same time, any player could throw a gnomeball to your inventory and stop you script, so its out of my control personally, should be integrated into findnormalrandoms for a global fix. I plan on adding all crafting methods, (glassblowing, urn support, flax spinning, etc) Currently working on spinning wheel in seers village. But yeah, go ahead and send me a copy of your procedure so far, I'd love to take a look!

Enjoy =)

From: Ashart1025
Holy baloney this script is fast :-P I was using it to craft a few blue d'hide bodies…

Any who this script is nails man great job!

========YouJustGotCrafted==========
Time: 9 Minutes and 25 Seconds
Items Total: 108
XP: 22680
Items/h: 688
XP/h: 144509
Loads: 12
Loads/h: 76

Ashart, great proggy, but Your also lagging, Usualy items/h is 900 for leatherworks, I've seen mine go up to 1100 for a 6 hour proggy. Let me know if you have any problems.

Dunno, didn't seem laggy.

woop, thanks!


image host

if this dosent support clay needles, it would be very nice to add support for it

A Small problem i come across making D hide bodies, it only lets 2 craft and then withdraws more. still xp but if it used the whole inventory i think it would be faster.

Hmm, That's weird. Record it for me and pm me the video. Havnt heard that one before

Will do.

I've sent you the video, awaiting a reply, thanks

Just sent u instructions. Must have needle in toolbelt and thread in first inv slot.

Whenever i use it to make gold braces it goes over to the furnace uses the gold bars on it the it goes to minimap and clicks on furnace and repeats. any solutions?

you must be lagging, change the wait times a bit.

nice script, i will be using this after runespan, got 2 more lvls to go to finish that off. then off to crafting!!!!

Enjoy!

No Plugins update available.
No MSI update available.
No SRL update available.
Running MSI…
No SPS update available.
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'X' never used at line 256
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'Y' never used at line 256
[Error] C:\Simba\Includes\srl/srl/misc/paintsmart.simba(560:12): Unknown identifier 'TPAFromEllipse' at line 559
Compiling failed.
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'X' never used at line 256
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'Y' never used at line 256
[Error] C:\Simba\Includes\Sps/sps.simba(125:3): Unknown identifier 'sortTPAByX' at line 124
Compiling failed.


Please help me…I'm just 99 crafting away from max cape

========YouJustGotCrafted==========
Time: 1 Hours, 2 Minutes and 33 Seconds
Items Total: 855
XP: 159030
Items/h: 820
XP/h: 152546
Loads: 95
Loads/h: 91

[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'X' never used at line 256
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'Y' never used at line 256
[Error] C:\Simba\Includes\Sps/sps.simba(125:3): Unknown identifier 'sortTPAByX' at line 124
Compiling failed.


Still getting this…Help please.

BoxRewards := ['Slayer Xp'];//Random event prices.

Is that good? Or is it supposed to be: BoxRewards := ['Xp'];//Random event prices.
Or: BoxRewards := ['Slay Xp'];//Random event prices.

For some reason it makes the bodies and then when they are done, it should open the bank, but it waits like 10 secs, and then opens it.

Hopefully this works well doing gold bracelets @ edge.

Exception in Script: Unable to find file 'srl/srl/misc/Smart.simba' used from ''
i get this error every time i try to run… i never touched anything below the line and i followed the instructions

Nice! I'm getting ~190k/hr with green d'hide bodies at SW bank.

Edit: Already gotten a request for it over PM so I might as well put it up here. For all those who are getting 99 craft with d'hide bodies, replace your Leatherbanker procedure with this one so you can use SW bankchest:

It helps the xp/hr a lot to be in a randomless location, and combined with SMARTManager you can basically get 99 crafting in one run!

Awesome script punkd! Here's a shortish proggy from earlier making green d'hide bodies:

========YouJustGotCrafted==========
Time: 1 Hours, 8 Minutes and 48 Seconds
Items Total: 1233
XP: 229338
Items/h: 1075
XP/h: 200004
Loads: 137
Loads/h: 119

And another:

========YouJustGotCrafted==========
Time: 4 Hours, 10 Seconds
Items Total: 4374
XP: 813564
Items/h: 1092
XP/h: -94804
Loads: 486
Loads/h: 121

From: xDieGlocke
No Plugins update available.
No MSI update available.
No SRL update available.
Running MSI…
No SPS update available.
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'X' never used at line 256
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'Y' never used at line 256
[Error] C:\Simba\Includes\srl/srl/misc/paintsmart.simba(560:12): Unknown identifier 'TPAFromEllipse' at line 559
Compiling failed.
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'X' never used at line 256
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'Y' never used at line 256
[Error] C:\Simba\Includes\Sps/sps.simba(125:3): Unknown identifier 'sortTPAByX' at line 124
Compiling failed.


Please help me…I'm just 99 crafting away from max cape

Go to help section of the forums

From: snowver
========YouJustGotCrafted==========
Time: 1 Hours, 2 Minutes and 33 Seconds
Items Total: 855
XP: 159030
Items/h: 820
XP/h: 152546
Loads: 95
Loads/h: 91

Nice

From: xDieGlocke
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'X' never used at line 256
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'Y' never used at line 256
[Error] C:\Simba\Includes\Sps/sps.simba(125:3): Unknown identifier 'sortTPAByX' at line 124
Compiling failed.


Still getting this…Help please.

Go to help section of forums. Not a script problem

From: Reinier
BoxRewards := ['Slayer Xp'];//Random event prices.

Is that good? Or is it supposed to be: BoxRewards := ['Xp'];//Random event prices.
Or: BoxRewards := ['Slay Xp'];//Random event prices.

Slayer xp

From: Reinier
For some reason it makes the bodies and then when they are done, it should open the bank, but it waits like 10 secs, and then opens it.

Move to the spOt closest to the banker

From: GetFresh
Hopefully this works well doing gold bracelets @ edge.

Works great!

From: Sacredfire
Exception in Script: Unable to find file 'srl/srl/misc/Smart.simba' used from ''
i get this error every time i try to run… i never touched anything below the line and i followed the instructions

You dnt have srl installed…

From: kneekopiko
Nice! I'm getting ~190k/hr with green d'hide bodies at SW bank.

Edit: Already gotten a request for it over PM so I might as well put it up here. For all those who are getting 99 craft with d'hide bodies, replace your Leatherbanker procedure with this one so you can use SW bankchest:

It helps the xp/hr a lot to be in a randomless location, and combined with SMARTManager you can basically get 99 crafting in one run!

Awesome script punkd! Here's a shortish proggy from earlier making green d'hide bodies:

========YouJustGotCrafted==========
Time: 1 Hours, 8 Minutes and 48 Seconds
Items Total: 1233
XP: 229338
Items/h: 1075
XP/h: 200004
Loads: 137
Loads/h: 119

And another:

========YouJustGotCrafted==========
Time: 4 Hours, 10 Seconds
Items Total: 4374
XP: 813564
Items/h: 1092
XP/h: -94804
Loads: 486
Loads/h: 121

I will add soul wars bank when the time is needed

Just started using for green d'hide bodies in soul wars with kneekopiko's SW banking method. so far so good. Ill update when 99 =D

This script is amazing =) I have used it for gem cutting as well as green d'hide bodies. Both times I have ran for hours without any problems!! Thanks!!

Enjoy guys.

Would it be possible to add the dung lobby bank for f2p? no randoms c:

I'm adding a whole bunch of new features which will be released in the next few days. Ill keep that in mind.

From: punkd
I'm adding a whole bunch of new features which will be released in the next few days. Ill keep that in mind.

is al kharid bank going to be included? :D

maybe

Just hit 94 on green d'hide bodies with absolutely no problems =D

From: ryhgoalie37
Just hit 94 on green d'hide bodies with absolutely no problems =D

Enjoy ^.^, if anything let me know

Trying this script out, 96 craft atm. Hopefully 99 soon!

Post here if you run into any bugs :)

My only complaint about this script is that it's a little slow >.< it wastes 3-5 seconds every inventory of green bodies just sitting there (i.e. after it clicks stuff it waits too long)

Edit out wait times. Most people have slower pc's/Internet so they lagg. It's setup with lag time in mind.

hmm just me or dosent it run back to bank when creating sapphire bracelet's?

else it seems to be stabile, bit slow but other than that amazing script :)

heres a progress report for ya:

the xp per hour seemed to screw up though, no idea how lol.

========YouJustGotCrafted==========
Time: 5 Hours, 30 Minutes and 20 Seconds
Items Total: 18312
XP: 915600
Items/h: 3326
XP/h: -50393
Loads: 654
Loads/h: 118

nice progress report, I've heard from a few people xp bug happens when you level up.

when you add soul wars bank to leather crafting, i will love you!

Maybe in the next update.

it wont start for me?

send me an msg please.

Post your error?

need soulwars banking asap please :3

Mine is doing the north alignment then stands there afterwards.

Make sure you've followed all instructions.

makes 2 green bodies and banks? keeps doin that..

Keep needle in toolbelt not inv and have tread in first inv slot

Hmm, I don't seem to know what I am doing wrong (I am just testing the script) but I attempted to run it but it won't "find" gold bars in my bank (they are clearly visible)

When it does find them, it normally just re-banks.

You should try n make the wait time a bit longer if your lagging. If it doesn't have bars in the inv before times up it resets.

nice script got me 70-90 craft in like 2 days ty bro
wish u added sw soon :p!

testing this script.

Nice script bro! It works like a charm.. Even the price dropped 7GP today, i get 85 in a little day. :P

EDIT:
========YouJustGotCrafted==========
Time: 1 Hours, 17 Minutes and 3 Seconds
Items Total: 1044
XP: 194184
Items/h: 812
XP/h: 151214
Loads: 116
Loads/h: 90

Pretty Sick xp!

Enjoy guys.

Damn I wanna use sacred clay knife and gets the same result with d hide as the guy above :/, does one invent and then logs out.

Theres a huge delay between standing in front of the edgeville furnace and then it proceeding to select the option to smelt.

That's because it finds the red color, clicks the gold bar then the furnace again. What's your complaint?

As for sacred clay needles (not knife) ATM does not support it. It's easy to add a function to use the needle but it will not withdraw another sacred clay, make knife etc. ATM will not support it.

Got 99 a few days ago forgot to post =p I used green d'hide bodies in soul wars with kneekopiko's banking method. Thanks again! =D

Congrats ^_^ I should make a 99 list

 [Error] C:\Simba\Includes\Sps/sps.simba(35:17): Unknown type 'T4DIntegerArray' at line 34
Compiling failed.

It says this when I'm trying to run the script, what should I do? I have updated my SRL and MSI.

That's an error with SPS 2. I don't know if this script uses SPS 1 or 2, or even SPS at all. You have to manually move your plugins.

Why is the bot very slow with clicking gold bars at the furnace? am i doing something wrong ? or.. you tel me ;)

Good script. with little adjustement it work well.

From: Brooklyn

 [Error] C:\Simba\Includes\Sps/sps.simba(35:17): Unknown type 'T4DIntegerArray' at line 34
Compiling failed.

It says this when I'm trying to run the script, what should I do? I have updated my SRL and MSI.

You need to update and/or fix your sps.

From: Kyle Undefined
That's an error with SPS 2. I don't know if this script uses SPS 1 or 2, or even SPS at all. You have to manually move your plugins.

It's compatible with both SPS1 &2 Kyle making a 99 list did u get 99 with this?

From: Inheaven
Why is the bot very slow with clicking gold bars at the furnace? am i doing something wrong ? or.. you tel me ;)

The script must first find the furnace then use the gold bar on it

From: Chry
Good script. with little adjustement it work well.

Up to the user to adjust whatever they like.

Enjoy

went well for 1k emerald rings. When i restarted the bot and added my account details etc, he is not able to make emerald rings anymore. When the bot can choose from : ring, bracelet etc.. he closes the tab, and do the same again and again and again. How to fix this ? :S

I did not understand what your saying

Bot get stuck at the point where he have to click on craft emerald ring..

Make sure you setup script correctly

I did, i followed the instructions :$


MY SETUP:
whatarewedoing := 'Jewelry'; //Read NFO above
What := 'Emerald'; //Read NFO above
Item := 'Ring'; //Read NFO above
Make := 1000; // How many items to make before it stops

EDIT:
The following happens:
1. Clicks goldbar->furnace
2. Clicks at minimap in the right corner to move, but my account is already located at this spot…



Hopefully you can help me now :S

I got 93 craft with this (from 62), then used Narcles the rest of the way.

Going to re test this on the 28th till the 22nd of next month when i get members back see how it works again hopefully i can get some nice 10-20 hour proggys now that you can run it more than 6 hours without shutting off.

how do i set the script to load onto world 44?? i set it as the smart world but it still chooses diff worlds?

From: Inheaven
I did, i followed the instructions :$


MY SETUP:
whatarewedoing := 'Jewelry'; //Read NFO above
What := 'Emerald'; //Read NFO above
Item := 'Ring'; //Read NFO above
Make := 1000; // How many items to make before it stops

EDIT:
The following happens:
1. Clicks goldbar->furnace
2. Clicks at minimap in the right corner to move, but my account is already located at this spot…



Hopefully you can help me now :S

I'll take a look through, may be the craft menu check.

From: Kyle Undefined
I got 93 craft with this (from 62), then used Narcles the rest of the way.

Pshh mine wadnt good enough?!? =P jk

From: chrisman
Going to re test this on the 28th till the 22nd of next month when i get members back see how it works again hopefully i can get some nice 10-20 hour proggys now that you can run it more than 6 hours without shutting off.

enjoy and as for the world chosing, its pretty much random from what I understand.

From: punkd
I'll take a look through, may be the craft menu check.

Thanks, let me know if you figured it out ;)

I love this script when i get it to run for more than an hour! I got a problem with the script to find the furnace, sometimes as i stated it runs smooth for a couple of hours, and next time i start it up the script hardly finds the furnace when standing in edgeville bank or in some cases not at all. I also got another a problem with the script not able to find/walk to the furnace if its positioned to right or to the left side of the banker.

why al-kharid members? cant i just smelt gold bars into gold necks? -.-

I'm not sure yet. A bit busy ATM will let you guys know what's coming

has full inventory of gold bars,, clicks on furnace sits their for 5 seconds then click on mini map to go to the furnace and repeats the process.

I have downloaded the 1.17 version and once it logs in it clicks the compass, moves the camera up and the mouse seems to follow white capes around, but never clicks anything, if I disable smart, I can click the banker, and it withdraws the gold bars and closes the banking interface, but never moves out of the bank. Any suggestions? :/

I'll be looking into these problems the next few days.

From: feh55
I love this script when i get it to run for more than an hour! I got a problem with the script to find the furnace, sometimes as i stated it runs smooth for a couple of hours, and next time i start it up the script hardly finds the furnace when standing in edgeville bank or in some cases not at all. I also got another a problem with the script not able to find/walk to the furnace if its positioned to right or to the left side of the banker.

The last part of the above post is the same problem i have still were it dosent find furnace if its to the left of the right of the banker.

Yeah I'm not sure why it does that

Well if you get that fixed i assure you it will run flawlesly and never need updating again. :D

Like i told you before, emerald rings where not working. Same for emerald bracelets :l Hope you can fix it soon enough, so i can continue my way to lvl 80 :)

dosnt work , and cud u add makeing leather - coifs ???

I'm back home now from Vegas so I'll test out some things.

Ok, No problem! Let me know if it worked out ;)

got this:

[Error] C:\Simba\Includes\Sps/sps.simba(300:3): Unknown identifier 'SPS_FilterMinimap' at line 299
Compiling failed.
[Error] (43:35): Unknown identifier 'MMCX' at line 42
Compiling failed.

Sps problem not my script

Yeah I noticed that, could you help me to solve this?

This works on alkharid?

It's not working for me on alkharid, it login with my user and pass and then move the camera, face north and nothing.

Stop double/triple posting. It does NOT support al kharid I will fix the problem in the next update. Have patience

90-99


ty, i would be happier when it would be able to bank at soul wars…

Congrats to you. Hope it was s good experience!

Don't get mad bro, im a fkin noob :).

Doesn't matter we have rules in the forums including no cussing outside of the BBQ forum

FYI Script doesnt seem to be working in edgeville.

From: public_static_void_main
FYI Script doesnt seem to be working in edgeville.

doesnt work because they changed the bankers to "royal guards"

working on updating the bankers colour on mine. will edit with new colour when i get it working :D

change your line 674 and 675 to this should fix the problem

FindColorsSpiralTolerance(x, y, Banker, 4743589, MSx1, MSy1, MSx2, MSy2, 10);
  if Length(Banker) = 0 then FindColorsSpiralTolerance(x, y, Banker, 4743589, MSX1, MSY1, MSX2, MSY2, 10); 
 

That explains quite alot, I havnt played for a while so :P

ye they only changed it about 10 hours ago. Its for some random event thing there holding

also i wouldnt bother editing your script for it as it should be changed back in a week or 2. just keep it in as antileech/people who are to dumb to not search for answers on the thread first.

ps love your use of cases and the script is slowly getting me 99 :D

They're going to change back? Mm I'll leave it then. Enjoy :)

Script works fine when crafting gold bracelets :)

Is it just me fml it always walks on the wrong square in bank and it fuks it even though ive seen people posting it also. And no im not lagging.

From: punkd
They're going to change back? Mm I'll leave it then. Enjoy :)

Why wouldn't you change? Atm the script isn't working optimally, and I did use the other coordinates the dude posted a bit above me.. It does work, but gets stuck a lot… I wouldn't mind a minor fix, making the script work flawless again..

I'm have other things to improve in the script. It'll take me roughly 2 weeks to finish alot of my updates with my shit schedule so learn scripting and fix what u can. No? Wait for an update.

From: punkd
I'm have other things to improve in the script. It'll take me roughly 2 weeks to finish alot of my updates with my shit schedule so learn scripting and fix what u can. No? Wait for an update.

It wasn't meant to be a provocation to you PunkD… Not at all, no need to be mad at me :redface:
Anyhow, I'll see what I can fix up myself, else I'll wait patiently..
Thanks for the script anyway!

Didn't mean to sound like a jerk ive just been stressed recently. Problems keep stacking up

From: punkd
Didn't mean to sound like a jerk ive just been stressed recently. Problems keep stacking up

I know the feeling bro, good luck getting stressed out a bit :cool:
Keep it cool mate, your script is marvelous :)

Hmm… I'm trying to do Emerald Rings atm at Al Kharid and I changed the bank operator colors but after it withdraws the Emerald and Gold Bars it doesn't want to go to the Furnace. Any help?

Sorry I just went back a few pages and saw that Al Kharid isn't supported yet. Are you still working on this because this could help me out tremendously while I study for finals. lol. I need to gain a few crafting levels to get Lunar + Veng.

im working on a few updates that will be posted soon

i know u got alot to do punkd but please read the pm i sent u :D

Chris, I can't help you in that matter, you'd have to learn scripting. That's kind of the reason it's put there, if I help you I might as well post it for everyone else.

When ever I set it up to craft sapphire bracelets at Al-kharid it just sits in the bank..? by Members did you mean on rs or srl?

*sigh* srl members

From: punkd
*sigh* srl members

well sorry *sigh* thanks though.. *sigh*

I'm just a bit dissappointed in life dnt mind my mood

please add soft leather support - make coif :S

dude, when i try to make green bodies at edgeville, it does not open the bank for some reason. but when i put the hides in the inventory, it crafts them then it doesnt open the bank again. please fix that. thank you

If you leaches have a problem with the script then find a new one no script is perfect and cant be 100% perfect ever so use it and stop complaining or find a new one. Ive used this script since it was made and experienced problems but instead of complaining ive made an indepth description to whats happening and everntualy it gets fixed.

JESUS.

Yo PunkD, are you still working on the update mate? :-)

From: thomas1116
please add soft leather support - make coif :S

I'll add it in the update

From: lord ahmad4
dude, when i try to make green bodies at edgeville, it does not open the bank for some reason. but when i put the hides in the inventory, it crafts them then it doesnt open the bank again. please fix that. thank you

New edgeville bankers. Someone posted a temporary fix, use it.

From: chrisman
If you leaches have a problem with the script then find a new one no script is perfect and cant be 100% perfect ever so use it and stop complaining or find a new one. Ive used this script since it was made and experienced problems but instead of complaining ive made an indepth description to whats happening and everntualy it gets fixed.

JESUS.

Chrisman thanks but no need to get angry.

From: Derpitbro
Yo PunkD, are you still working on the update mate? :-)

On a break from some stuff but slowly working on it.

Sorry and did u get my private message? Realy need your help mate.

I did, I replied to ur thread post

http://villavu.com/forum/showpost.php?p=1036298&postcount=367

hey punkd officially got 99 crafting from your script wooooooooooo!!!%^&*&^#^&*(
ye thought id let you know :D

also with the banker colours I updated the colours before every use because jagex seems to be doing shifty stuff here and changing them <3

Congrats sir. Hope you enjoyed

Not working at all for me..its runs to the bank but never clicks the banker, it's just standing there (Edgeville - it seems to try clicking the spot behind the door)
Am I doing something wrong?

==> Never mind, new bankers were the issue, temporary fix worked like a charm for openening bank.

Next issue, put gold bars, sapphires in a seperate tab, bank is on the tab, script right clicks the gold over and over again without withdrawing anything..

==> Manual typed the X withdraw to 14, seems to work now

From: meteora
Not working at all for me..its runs to the bank but never clicks the banker, it's just standing there (Edgeville - it seems to try clicking the spot behind the door)
Am I doing something wrong?

==> Never mind, new bankers were the issue, temporary fix worked like a charm for openening bank.

Next issue, put gold bars, sapphires in a seperate tab, bank is on the tab, script right clicks the gold over and over again without withdrawing anything..

==> Manual typed the X withdraw to 14, seems to work now

I'm pretty much experiencing the same problem as you mate, would you mind posting your fixes? Mine keeps getting stuck at the bank, but the sapphire and gold bar withdrawel seemed to work, when you changed it manually as you did… But the banking part, is broke for me.. Any help? :-)

From: powdrski
doesnt work because they changed the bankers to "royal guards"

working on updating the bankers colour on mine. will edit with new colour when i get it working :D

change your line 674 and 675 to this should fix the problem

FindColorsSpiralTolerance(x, y, Banker, 4743589, MSx1, MSy1, MSx2, MSy2, 10);
  if Length(Banker) = 0 then FindColorsSpiralTolerance(x, y, Banker, 4743589, MSX1, MSY1, MSX2, MSY2, 10); 
 

Hey thanx a lot for fix , its working fine even in varrock

From: meteora
Not working at all for me..its runs to the bank but never clicks the banker, it's just standing there (Edgeville - it seems to try clicking the spot behind the door)
Am I doing something wrong?

==> Never mind, new bankers were the issue, temporary fix worked like a charm for openening bank.

Next issue, put gold bars, sapphires in a seperate tab, bank is on the tab, script right clicks the gold over and over again without withdrawing anything..

==> Manual typed the X withdraw to 14, seems to work now

Sounds great. The new bankers should go back to the old in a week or so

From: Derpitbro
I'm pretty much experiencing the same problem as you mate, would you mind posting your fixes? Mine keeps getting stuck at the bank, but the sapphire and gold bar withdrawel seemed to work, when you changed it manually as you did… But the banking part, is broke for me.. Any help? :-)

take a look through the posts, you MIGHT find what your looking for

From: Run S Kape
Hey thanx a lot for fix , its working fine even in varrock

the new bankers are all the same so the bankers should work pretty much all of varrock

just stands there in al charid :(========YouJustGotCrafted==========
Time: 1 Minutes and 49 Seconds
Items Total: 0
XP: 0
Items/h: 0
XP/h: 0
Loads: 0
Loads/h: 0

From: punkd
Sounds great. The new bankers should go back to the old in a week or so



take a look through the posts, you MIGHT find what your looking for



the new bankers are all the same so the bankers should work pretty much all of varrock

PunkD, I know it's easy for you to say that "look through the other pages", the thing is I already did, and I do use the code for the new bankers. Sometimes the script do work, but after like 5 runs from edgeville bank, to the furnace, it stops at the bank, it do withdraw the needed materials, but after that it just opens the bank, then close the bank, and repeat like that…. :fiery:

Maybe it's just me but it's very buggy. You want us to stand in edge bank with thread on first slot and green dragon leather visible in bank right? When I start it on its own it clicks compass twice and then stops and does nothing. The proggy then goes crazy and spams it over and over about 3 every second. When I withdraw the green leather manually, it makes it perfectly and then freezes. Tried both versions. Is this some kind on anti leech? Or set-up is wrong? Or something wrong with proggy/withdraw?

It's a temporary antoleecb :)

I don't know what's wrong but it takes pretty long untill it's using my gold bar on the furnace. Does everyone have the same little problem? First when it's closing the bank it's walking to the furnace. While waiting like 3 sec it's clicking again on the same spot..O_O

From: punkd
It's a temporary antoleecb :)

Does it have to do with the new bankers? Can't I just swap out the banker part with one on a script that still works?

From: Enter
Does it have to do with the new bankers? Can't I just swap out the banker part with one on a script that still works?

change your line 674 and 675
Code:
FindColorsSpiralTolerance(x, y, Banker, 4743589, MSx1, MSy1, MSx2, MSy2, 10);
if Length(Banker) = 0 then FindColorsSpiralTolerance(x, y, Banker, 4743589, MSX1, MSY1, MSX2, MSY2, 10);

From: lucasboom
change your line 674 and 675
Code:
FindColorsSpiralTolerance(x, y, Banker, 4743589, MSx1, MSy1, MSx2, MSy2, 10);
if Length(Banker) = 0 then FindColorsSpiralTolerance(x, y, Banker, 4743589, MSX1, MSY1, MSX2, MSY2, 10);

Thanks, that's all? I was trying to do it myself and I swapped the whole thing and it just kept opening and closing bank -.- I fail at this.

Thanks bro! :) Needed 61 crafting for a quest requirement…


EDIT: WORKS! TSM!! +REP if I can.

I've tryed several times now.. And can ANYONE tell me whether it's anti-leech or not.. Just please tell me…
I'm doing sapphire bracelets, so I'm withdrawing 14 sapphires and 14 gold bars. When I do this it works like 4-5 runs….
I do have the right withdraw number - 14.
I've already written this: change your line 674 and 675
Code:
FindColorsSpiralTolerance(x, y, Banker, 4743589, MSx1, MSy1, MSx2, MSy2, 10);
if Length(Banker) = 0 then FindColorsSpiralTolerance(x, y, Banker, 4743589, MSX1, MSY1, MSX2, MSY2, 10);
And yet….
It still stops after 4-5 runs…
Please help me!!!

Lol. That's cuz the banker lines are not stable. They are temporary. That's why I didn't make an official change. Anyway should be working flawlessly next week

ty mate for epic script, few problems at the start, resolved by reading through the previous posts :D. Thanks alot, brb getting 99 crafting.

Enjoy buddy!

mine isnt finding bank at edgeville for some reason..

nvm

*sigh* yes, reading prev posts could be very helpful

Any chance you can add sacred clay needed to the leather crafting? I dont craft without one :o

Amazing script!! Going to get me 99 hopefully!!
For all those wanting sw bank for crafting leathers, use

(SRL_BANK_SW);

in place of his find banker procedure and it works perfectly. (so far anyway :P)

It is quite possible I will not. I don't have acc's Yo testvwith. They use different methods

Is this smoother than narcles

Was flawless havnt updated or tested in a while so not sure

not working atm. just logs on and stands there.

It doesnt rebank …

Lol I know it does.

Wrong script.

I thought so

When I try to use it; it will withdraw the gold bars fine, get to the furnace, then when the make x jewelry interface comes up, it never clicks on it. Then it just keeps clicking on the minimap to get to the furnace again.

Havnt had much time to update. Will soon

Crafting works fine for me.

========YouJustGotCrafted==========
Time: 1 Hours, 59 Minutes and 10 Seconds
Items Total: 1764
XP: 328104
Items/h: 888
XP/h: 165222
Loads: 196
Loads/h: 98

Was making green d'hide bodies but I ran out. Will be using up my blue dragon leather now, hopefully it will do 4-5 hours straight :)

Well, the only problem I've been experiencing is, while at Edge bank, it rarely gets stuck after right clicking the banker. I'm crafting.

It right clicks the bank(er), just enough so it covers the banker. And the mouse just hovers around the small box which is blocking the banker. The box does contain an option to open the bank, but it fails to detect it.

SW banking wouldn't experience this problem.

It just experienced another similar one. It already opened the bank, but the mouse just kept moving around where the banker usually is. It couldn't detect that the bank was already open.

can you add seers village support for flax spinning, with seers headband 3 it is the fast for spinning flax, it even beats lumbridge and nezi.

when i type in Jewelry for whatwerdoing it comes back with an error saying it doesn't know what the identifier is

its ok when it works for me it banks sometimes and then just stands there searching and other times it sits at the furnace and keeps using the gold bar on the furnace and than exits out of the drafting page and then just sits there

The GUI changed in runescape
Could you update it please?

[Error] C:\Simba\Includes\srl/srl/misc/Smart.simba(53:19): Invalid number of parameters at line 52
Compiling failed.

Get this when I try to start it

From: tankerzz
[Error] C:\Simba\Includes\srl/srl/misc/Smart.simba(53:19): Invalid number of parameters at line 52
Compiling failed.

Get this when I try to start it

I bet you got java 7.

From: MotorMouse
I bet you got java 7.

Which Java I need?

i tried it with java 6 and i still get, Invalid number of parameters at line 52

Im getting the same Parameter problem. Anyone know the fix?

hey guys, I havn't been active for a while. Several months actually. I havnt worked on anything due to work 16 hour shifts and such. I will work on the script and hopefully not much has changed in my absence.

Any new updates on the parameter fix Punk'd?

From: Usmarine
Any new updates on the parameter fix Punk'd?

Have you ever heard of this nifty feature called the search button? It can be used to do fantastic things, such as searching an error you come across and finding the solution to it!
Since you seem to be unable to notice it on the bar at the top of the page, I did the search for you, and now I present you: The thread that has instructions to fix all the errors this script has.

From: Usmarine
Any new updates on the parameter fix Punk'd?

Hey, I haven't been on for a few months, I haven't even ran simba since I've been gone so I have absolutely no idea whats what. I wouldn't be able to give you an answer or update just yet, I apologize. (I also do not have any accounts to test on.) Also the script is most likely outdated so I doubt you'll have luck running it unless you can edit the majority. Like I said I have not tested yet. I'll come up with an update as soon as I get my hand on an account.

From: litoris
Have you ever heard of this nifty feature called the search button? It can be used to do fantastic things, such as searching an error you come across and finding the solution to it!
Since you seem to be unable to notice it on the bar at the top of the page, I did the search for you, and now I present you: The thread that has instructions to fix all the errors this script has.

Although I believe this may be a solution to the parameter problem, the script is most likely outdated (Haven't tested)

Can you do Hardleather bodies with this Script?

i cant wait till this script get updated to bank properly i will make so many cannon balls haha

Ahh, I dont have any free time ;( im working 2 jobs, school and hardly time for family. I won't have much time to update this but ill work on it I promise. I'm pretty sure I'd have to rewrite the whole thing due to SRL and Runescape updates. I Dont have an account to test anything on tho so I can't promise any bulletproof results

Can u add lumbridge flax spinning?

From: Kerk
Can u add lumbridge flax spinning?

theres a script for that albredy in crafting

I get this

[Error] C:\Simba\Includes\srl/srl/misc/Smart.simba(46:19): Invalid number of parameters at line 45
Compiling failed.

??

Remove the -1 a few lines below the highlighted one.

Also, try searching next time, the answer is there :)

From: BMWxi
Remove the -1 a few lines below the highlighted one.

Also, try searching next time, the answer is there :)

I dont get it… what u mean with that -1? srry i'm not rly good with these…

thanks for the bot its really helping out. :D

does it work whit the eoc??

Hasn't been updated, nor tested by me for several months. Could imagine its broken but hey, i think it might be working

Moved into the Outdated section until it's verified as fixed/update/working.