SRL Archive - RS3 Outdated / Broken Scripts

CURRENTLY BROKEN, WILL FIX WHEN I GET THE CHANCE!!

*******Fwd Motion's FWDSummoner*******

NOTE: SCRIPT MAY NOT WORK UNTIL SPS IS UPDATED!
To manually update your sps images, download this: http://www.filedropper.com/runescapesurfacepng_1
Then extract it (and overwrite the files) to "C:\Simba\Includes\SPS\img\runescape_surface"

What does it do?
It will Create Pouches
It will Create Pouches, then turn them into scrolls
It will Turn Pouches into Scrolls!


SETUP
Start anywhere between the new taverly bank and the obelisk
Have Charms, Pouches, and Shards in the first three inv slots
Have Secondary Items in first bank slot
Have made pouches in Second Bank slot
Fill in the GUI
Click RUN!

Post your progress reports!

To Do List:
1. Clean it up
2. Create more accurate walking
3. Speed it up a bit
4. Suggestions?

UPDATES:
//v1.0: - 5 Downloads
Initial release

//v1.01:
Added a bit more waiting before trying to click obelisk (for the laggier few)
(hopefully) Fixed the DTM/BMP freeing error

//v1.1:
Added failsafe for infusing the pouches
Added better banking failsafe

Will test in abit :P hope it won't dissapoint

update: just logs in, toggles exp and stands there.


Exception in Script: The bitmap[0] does not exist
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Admin bitmap, SRL - Flag bitmap]

From: phamxboa
update: just logs in, toggles exp and stands there.


Exception in Script: The bitmap[0] does not exist
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Admin bitmap, SRL - Flag bitmap]

Did you update your sps images?

Yes I did.

Are you at the taverly bank?

Yeah, the new one.

From: phamxboa
Yeah, the new one.

Did you select what you wanted the script to do in the gui?

I honestly have no clue why it isn't doing anything for you.

Yes, I type my username, pw , select charms to pouches etc. etc. same results

From: phamxboa
Yes, I type my username, pw , select charms to pouches etc. etc. same results

Alright, I just ran it and it seems as though when it first starts it takes about 10-15 seconds to start, so try letting it sit for a few seconds.

I just ran it for 30 minutes with no problems, some slow walking/banking but it made my pouches just fine.

From: dmarmpro
I just ran it for 30 minutes with no problems, some slow walking/banking but it made my pouches just fine.

Yeah, the walking is a bit slow, but that's because of SPS, I may customize the specific includes in the future.

And the banking is slow, because I'm currently not having it detect the uptext, because it is slightly broken and it would require more stuff by the user, but I'll lower some waits and stuff to try to optimize that.

Thanks for the input david (:

Now im gettin this error ):

Go to C:\Simba\Includes\SPS\img\runescape_surface
and see if the file "8_7" is there, if it isn't, download this:http://www.filedropper.com/runescapesurfacepng

and extract the file to Simba\Includes\SPS\img\runescape_surface

Got it out of the banking situation. But when it goes across the bridge, it just stands there and fails detecting obelisk,.

From: phamxboa
Got it out of the banking situation. But when it goes across the bridge, it just stands there and fails detecting obelisk,.

Alright, I've figured out the problem, the images that I uploaded for sps are very dark compared to how they should be, I'm working on a fix now, give me a few minutes or so and I'll bust out a fix!

EDIT:
Images have been fixed, please download the new ones here: http://www.filedropper.com/runescapesurfacepng_1
Let me know if you you still run into problems! (:

Do I redownload those images and overwerite the current ones in simba ?

From: phamxboa
Do I redownload those images and overwerite the current ones in simba ?

yes

i followed the instructions when i try to run your script at the tavelry bank it just runs north to the warriors guild and stands there and does nothing i have updated all the sps srl msi everything still no help

From: r4p1dz
i followed the instructions when i try to run your script at the tavelry bank it just runs north to the warriors guild and stands there and does nothing i have updated all the sps srl msi everything still no help

did you download the images and put them in the correct folder?

It now detects the obelisk :D I will rep up this script! thanks for the help!

Why you upload file instead of using attachment at site? No ofence bu admins should check link…

From: SantWrong
Why you upload file instead of using attachment at site? No ofence bu admins should check link…

Oh wow, what you said didn't offend me, but you really need to work on your grammar!
Anyways, if these were viruses, everyone else who has used the script would have said so. Also, I posted these images (with the same link) in the srl repository to hopefully be pushed, and I was praised by some srl members for being able to get them.

Reference: http://villavu.com/forum/showthread.php?t=74442

Not every download on the internet is a virus, dude.

Oh and the reason I didn't add it as an attachment, is because the file is too large.

I was looking forward to using this, but the furthest i got to was just 2 clicks towards the summoning place. So many misclicks and whatever.. I added your skype.

The script worked fine for me for around ~20 minutes, and then it just stood there at the bank with the bank screen open for about another ~10 minutes. I'm not sure as to why it stopped working, but for the 20 minutes it did work. It was awesome

From: Dmazing
I was looking forward to using this, but the furthest i got to was just 2 clicks towards the summoning place. So many misclicks and whatever.. I added your skype.

You need to update the sps images that I have posted in the original post, then it should work okay.

From: 68z35h9
The script worked fine for me for around ~20 minutes, and then it just stood there at the bank with the bank screen open for about another ~10 minutes. I'm not sure as to why it stopped working, but for the 20 minutes it did work. It was awesome

There's a few flaws that I need to work out, I'm currently in the process of getting more charms, as soon as I get a decent amount, I will perfect this script! (:

extracted and put in the img folder, now it got past the bridge in the weirdest way, and it couldn't get further than the cows. It seems to freeze runescape and won't unfreeze unless you disable smart.

From: Dmazing
extracted and put in the img folder, now it got past the bridge in the weirdest way, and it couldn't get further than the cows. It seems to freeze runescape and won't unfreeze unless you disable smart.

Make sure the images are in the correct spot, don't put the folder inside the folder, put the images inside the folder (if that makes sense).

The images should be pushed soon! I'm sorry for the inconvenience!

Like I said before, as soon as I get a decent amount of charms, I'll do more updating on this script!

The script works well so far, but when it gets to the obelisk it tries clicking on spirit wolf instead of what I want it to click. I browsed the coding but I'm not great at it and I couldn't figure it out. Any help?

From: Zlmpery
The script works well so far, but when it gets to the obelisk it tries clicking on spirit wolf instead of what I want it to click. I browsed the coding but I'm not great at it and I couldn't figure it out. Any help?

Oh, in the interface that pops up, you need to click the filter option.

I've spent a lot of money and time trying to get this script to work. I am very frusturated, I did what you told me to do and now it's only worse. Please answer me on Skype, cause this step by step isn't going to work!

From: Dmazing
I've spent a lot of money and time trying to get this script to work. I am very frusturated, I did what you told me to do and now it's only worse. Please answer me on Skype, cause this step by step isn't going to work!

Well I've spent a whole lot more money and a hell of a lot more time. Please be a bit more patient, or write your own script.

I responded on skype, but it appears you're not online.

From: Fwd Motion
Oh, in the interface that pops up, you need to click the filter option.

Thanks, I found it. Wow, I feel dumb. It works perfectly now! :D If I had rep, I'd rep you. :P

If this is half as good as your herb cleaner I will be using it right after i get 96 herblore! (from your herb cleaner :P )

Mine takes in secondary ingrediants out then closes bank and runs north?? it doesnt go east towards obby..

From: I Bot Phats
If this is half as good as your herb cleaner I will be using it right after i get 96 herblore! (from your herb cleaner :P )

This needs a lot more work than my herb cleaner, haha. But it will eventually get there!

From: Welcome Fruity
Mine takes in secondary ingrediants out then closes bank and runs north?? it doesnt go east towards obby..

You need to update your sps images, read the first post about it. Let me know if it still doesn't work after that.

What's the minimum needed Summoning for this?

From: Sytherix
What's the minimum needed Summoning for this?

Whatever summoning level you need to make the pouches.

Can't update script anymore because I ran out of cash, if you would like to donate a few mil or so, please pm me. All donations will go to updating this script and to the creation of other scripts

hey man how do i get it to work so that it only makes pouches to scrolls. all that happens to me when i try to set it up is attempt to withdraw the pouches then gets stuck because none are withdrawn = ( please help

From: frenzy
hey man how do i get it to work so that it only makes pouches to scrolls. all that happens to me when i try to set it up is attempt to withdraw the pouches then gets stuck because none are withdrawn = ( please help

Have the already made pouches in your second bank slot.

sometimes when walking I get stuck at the fence with the cows and sheep. i don't think its a problem with the script because when i do it manually I also get stuck and I have to click to the side to get around the fence.

From: hookerm
sometimes when walking I get stuck at the fence with the cows and sheep. i don't think its a problem with the script because when i do it manually I also get stuck and I have to click to the side to get around the fence.

It isnt a problem with script its the stupid fence Fagex put in because i do legit sometimes and i hit that. Im sure a decent scipter could make it so that at that location it simply clicks to the right of the fence to bypass that problem

Yup, getting the same problem like every 20 mins. Still not too bad.

I'll work on this problem tomorrow, It shouldn't be too hard to fix!

From: Fwd Motion
I'll work on this problem tomorrow, It shouldn't be too hard to fix!

Thank you very much! Your script is pretty good apart from the gate issue, I used 6k golds and 3k greens while checking it every 10-20 minutes in case it got stuck. If you are able to fix getting stuck behind the gate, I'm sure your script will be almost flawless.

I never really got it to start :-/ it just kinda ran north & stood there :(

but I'll try again in bxp :)

got same went bit north and stood there

If you guys are having problems with the bot going to the north or what not.. just change the paths.. Duhh

hey guys, i managed to fix the sps_walkpath so no f*cking fence will stop you from botting :f:

in line 389 just change to:

ToObelisk :=  [Point(3340, 2982), Point(3373, 2984), Point(3415, 2995), Point(3454, 2995), Point(3487, 2969), Point(3511, 2954), Point(3525, 2951), Point(3534, 2928), Point(3534, 2894), Point(3534, 2857), Point(3553, 2858)];               

motion u can add it to OP if you want :)

From: Bulls
hey guys, i managed to fix the sps_walkpath so no f*cking fence will stop you from botting :f:

in line 389 just change to:

ToObelisk :=  [Point(3340, 2982), Point(3373, 2984), Point(3415, 2995), Point(3454, 2995), Point(3487, 2969), Point(3511, 2954), Point(3525, 2951), Point(3534, 2928), Point(3534, 2894), Point(3534, 2857), Point(3553, 2858)];               

motion u can add it to OP if you want :)

Thanks so much! I will test it and if it works wonderfully, I'll add it to the script!

From: Fwd Motion
Thanks so much! I will test it and if it works wonderfully, I'll add it to the script!

Hey mate, i haven't tested your script, but i know there is no need for it anymore, since the last update doesnt stop you at the gate anymore :)

^lol i waste my time for nothing.. at least i know now how to make sps_walkpaths :p

this script doesnt work :s

From: espritje
this script doesnt work :s

instead of saying it doesn't work, say what the problem is…

i start in new traverly bank press start just runs north

updated sps,srl,msi etc

Okay, but did you change your sps images that I have posted in the OP?

Could not find the obelisk after 10 tries, trying one more time
Once again couldn`t find obelisk, starting over

downloaded this http://www.filedropper.com/runescapesurfacepng_1

did those steps walking goes good now. ,just obelisk

seems i getting it to work lol

i can consider this as a anti leeching :D

Bot wouldnt enter my bank pin,manually did so, bot stood in bank,withdraws secondary and just stands there :(

please help

and yes, i did update the images

EDIT: updated the walk path but doesnt seen to go past the bridge and hovers over the "Wounded soldier" on the west side of the map facing north

EDIT: i placed myself at the obelisk and it seemed to walk back to the bank fine…..it hovers over the most random things in my bank, first my glory, then my ring of kinship, then an infernal urn? >_>

i then placed the secondary and premade pouches in a bank tab and it just goes to hover over blank bank space

From: iPyroi
Bot wouldnt enter my bank pin,manually did so, bot stood in bank,withdraws secondary and just stands there :(

please help

and yes, i did update the images

EDIT: updated the walk path but doesnt seen to go past the bridge and hovers over the "Wounded soldier" on the west side of the map facing north

EDIT: i placed myself at the obelisk and it seemed to walk back to the bank fine…..it hovers over the most random things in my bank, first my glory, then my ring of kinship, then an infernal urn? >_>

i then placed the secondary and premade pouches in a bank tab and it just goes to hover over blank bank space

I don't have much time today or tomorrow, but money I'm free all day, and my number one priority will be fixing this script, I'm sorry for not keeping it updated!

Suggestion: SUPPORT the new TAVERLY lodestone network teleport!

Also it's quite glitchy, another suggestion is that not needing to rotate the map when you bank!

From: Fwd Motion
I don't have much time today or tomorrow, but money I'm free all day, and my number one priority will be fixing this script, I'm sorry for not keeping it updated!

lol u could also write "i want money".. updating this script doesn't required money, because you can just put false secondary item at fist slot and let it run forever… ty for this script but it's too buggy. you don't have basic things like something that somehow looks for randoms, or even the pin code doesn't work. i fixed all by myself and i didn't spend money for that. if you don't want to update it just write it in your OP. i don't blame you or something, i just think you need to keep updating while asking for donations and not asking for donations before updating, and i WILL donate you after some updates so the script will be flawless. i promise ;)

From: Bulls
lol u could also write "i want money".. updating this script doesn't required money, because you can just put false secondary item at fist slot and let it run forever… ty for this script but it's too buggy. you don't have basic things like something that somehow looks for randoms, or even the pin code doesn't work. i fixed all by myself and i didn't spend money for that. if you don't want to update it just write it in your OP. i don't blame you or something, i just think you need to keep updating while asking for donations and not asking for donations before updating, and i WILL donate you after some updates so the script will be flawless. i promise ;)

Sorry, I haven't really had the time to update this script, it isn't the only script I own, I actually have this script along with five others. All of which require attention. I said that I will work on this script this monday, take my word for it. If you have such a problem with the script, then write your own and release it, do that and I'll gladly just delete my script.

If I wanted money, I would be getting scripts ready to sell for some of the upcoming reflection bots… But I write scripts here for free, yes I have posted in my thread that I do accept donations, but no, I never said anything about wanting money. It does create more of an incentive to want to do more with it if I am getting something for it, but I'm not.

And no, I couldn't just put a random item instead of a secondary, because before I release a script, I run it for 30 minutes, which the original version successfully did, sorry recent updates have slowly broken the script.

i wish i understood scripting

this works 100%, fucking love it man, i don't usually post but when i do… its useful. +1

From: Vicksuper
this works 100%, fucking love it man, i don't usually post but when i do… its useful. +1

Yeah works really well, nice script.:sasmokin:

How do you guys get it to work?
It just doens't work for me =/

Mind making it not rotate when banking because it's suspicious to Jagex that many people rotate very similairly and there is no reason to rotate.

Does making scrolls give summoning XP ?

From: illuminatiswag
Does making scrolls give summoning XP ?

very very… little

Amazing script. Seriously. This script is awesome!

Keep up the great work!

The script just logs in, goes to the bank, faces north, then walks to , repeat…

It only do one round of summon right?? For the others, i need to pay??