SRL Archive - RS3 Outdated / Broken Scripts

PLEASE POST PROGRESS REPORTS OR ANYTHING YOU COME ACROSS

New Willow Chopper / Banker for Draynor doesn't have a great anti-ban (doesn't auto respond) but I'm working on it but still need some more people to test it.

Works great for me, got it to run for like… 5 Hours without bugging but that was before I added to Progress Report so yea if you want to test it go ahead and please give me lots of feedback.

[V1.1]

Find Trees Faster and avoids Ents better, also banks better with less glitching.
Haven't lost an axe head yet so I don't know if new stuff works, but It should.

[V1.15]

Little more Random… works faster than before.

[New] Problem, If too many people are standing on the bank symbol when it goes to try the bank function it doesn't find it so it continues to try and cut logs, anyone know a good way around this, I was thinking of maybe using a DTM of the bankers and the sides of the bank and make it click in there but I don't think that will work since the MM shifts from time to time.

[V1.5]

Runs smoother and doesn't lag as much, fixed bank problem a little…
Also added status's to see where it was screwing up…

———Progress Reports———

Special Woodcutter

Time Ran: 59 Minutes and 56 Seconds
Loads Banked: 11
Ran Away: 4
Ents Avoided: 3
Axes Withdrawn: 1

"Got sent into a maze, didn't have another character to switch too."
——————————————————————–

Special Woodcutter

Time Ran: 33 Minutes and 57 Seconds
Loads Banked: 6
Ran Away: 1
Ents Avoided: 2
Axes Withdrawn: 0

"Lost axe head and couldn't find it… I don't know why it couldn't find it."
——————————————————————–

Special Woodcutter

Time Ran: 2 Hours 51 Minutes and 32 Seconds
Loads Banked: 24
Ran Away: 8
Ents Avoided: 6
Axes Withdrawn: 1

"Don't know just started wigging out."
——————————————————————–

Special Woodcutter

Time Ran: 46 Minutes and 32 Seconds
Loads Banked: 8
Ran Away: 2
Ents Avoided: 2
Axes Withdrawn: 0

"Had to turn it off…"
——————————————————————–

Special Woodcutter

Time Ran: 4 Hours 12 Minutes and 52 Seconds
Loads Banked: 46
Ran Away: 17
Ents Avoided: 11
Axes Withdrawn: 3

"Got teleported to Lumbridge Cellar" P.S. Longest Report EVER! YAY!

Looks pretty good to me.

nice one. :]

it works!

but it still needs a lot more work

good job so far

Thanks guys yea I'm working on it right now, working on the anti ban at least but anything you can think of off the top of your head that it needs other than better anti ban?

Oh, and WhiteShadow I applied with this script so if you know think its good umm yea, you know… I could use another yes XD.

i like it :) I have been having some problems with it though. It never banked my logs. My oak chopper also has problems but it's mostly with the SRL NextPlayer thingy.

Thanks I'll keep updating.

Ill post a report for you and any errors i come across.

Version 1.5 isn't working. Error message: Line 424: [Error] (18465:1): Unknown identifier 'ProgressReport'
Edit: I tried moving progressreport above procedure SpecialTree; and it worked.

not working scar say for me:
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

From: erkki
not working scar say for me:
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

You sure you have SRL properly installed?

axe finding??? will do proggy now

hi
thes script looks cool i will try it and give u some fedback
best wishes for all

Wow great script! It works very well and always seems to bank the logs. I've noticed one problem with the randoms, however, and it deals with the old man. It seems to solve the boxes pretty well, but if the old man just wants talk to you the bot doesn't respond. Eventually the old man tele's you to the wizard's tower where the bot just shuts down. Any hints on what needs to be done?

its working pretty good im running it now on my other computer ill post progress report after a while……but so far i was watching it and it makes 2 trips to bank b 4 banking


Well version 1.15's banking procedure is working better than 1.5 only in 1.15 randoms got me and was in lumby when i woke up but all in all ive done like 2k willows using your scrips great job
:f: :f:

Time Ran: 14 Minutes and 7 Seconds
Loads Banked: 3
Ran Away: 0
Ents Avoided: 2
Axes Withdrawn: 0

which version works the best?

the newest 1

it works good. well it works grate 8/10 it need random talking to lower randoms.
but it got me a cammo hat. the banking dosent work all that well if u bump an arrow key but it is good. its kind of slow to click the trees it w8s to long to go from tree to tree i will b looking for updates



i support this macro 100%!

I have't tried it yet but it sounds good

How do i use it !!!!!!

I got the scripet but how do i use it

From: bamm bamm 5
How do i use it !!!!!!

I got the scripet but how do i use it

read the tuts to learn how to even use scar…and also make sure you have scar installed correctly:duh:

Time Ran: 19 Minutes and 39 Seconds
Loads Banked: 13
Ran Away: 3
Ents Avoided: 0
Axes Withdrawn: 0


Nice :P
tried it on a n00b account but it always dies from the wizards -_-

does this have an anti-jekyll?

Time Ran: 26 Minutes and 17 Seconds
Loads Banked: 23
Ran Away: 1
Ents Avoided: 0
Axes Withdrawn: 0

Nice work man… except i lost 2 rune axes and 1 addy axe lol and when it goes to the bank and clicks the wrong spot it runs back to willows..

I tried the 1.5 version and those are my results:
-Same problem with the wizards, but most time he manages to run away
-Way too slow at finding trees.
-When he loses the axe head he goes to the bank and store the axe handle, instead of finding the axe head.
-When he doesnt bank properly he goes back to willows and search rapidly for some colour
-When a random appeared (some pr*ck with a crossbow =P ) first he run to south like always, then the random folowed him and busted his ***. Instead of getting away again he goes slowly to the trees (RIP) :spongebob:

i dont know how to work the autocutter can u send me a complete version?
my msn is [email]no1_curly@hotmail.com[/email]

(send via msn (instantmessaging))

there still problem for the banking..

looks nice ill try it 2 night and post progey in morning

Time Ran: 4 Hours 31 Minutes and 58 Seconds
Loads Banked: 42
Ran Away: 26 // Stupid Black mages.
Ents Avoided: 9
Axes Withdrawn: 2

Heh, ran it while I was in school.
When i came back i found it dead.

thank you m8 im going to try it out now ill edit for progress report


+rep for u ;)

Hey sorry I've been away on vacation I'm I'm going to be leaving again next week I'm working on a new tree finding procedure and fixing banking and randoms… thanks for the support though guys I've just been having some ruff times so thats why I haven't been updating.

Nice, i'll use it tonight!

why doesnt it aviod the ents? version 1.5 plz help =(

Hi people I'm new here when i download ur file i got a little error Include file C:\Program Files\SCAR 3.02\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 3.02\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

how do i use it is says
Include file C:\Program Files\XTZGZoReX\RuneScape MultiHack\Autos\SCAR\includes\SRL/SRL.scar does not exist.

im new to scar and when i tried this script i got this error well i get it with most scripts i try:

Failed when compiling
Line 435: [Error] (2212:24): Unknown type 'PPoint' in script C:\Program Files\SCAR 2.03\includes\srl\srl\core\Math.scar

Failed when compiling
Line 322: [Error] (15442:4): Unknown identifier 'FindItemName' in script E:\Ohjelmat\SCAR 2.03\Scripts\SpecialWillowChopper v1.5.scar

help please?

Failed when compiling
Line 25: [Error] (25:1): Duplicate identifier 'UpChars' in script C:\Program Files\SCAR 3.01\includes\srl\srl\core\Globals.scar

wats that plse help on how to fix

Try useing Scar 2.03 untill new srl come out, Also make sure you have setup srl correctly :)
~Stupedspam

im new to autoing… what am i doing wrong? this is what i get…

User specified a new RS window
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

can anyone help me i tryed the script but everytime i do it this shows up…

Include file C:\Program Files\SCAR 3.01\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 3.01\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

can anyone help

heybanking need bit of work it thinks its on der it thought it was in the bank bit but it wasnt it dint click on it lol and then it got in the bank but just done like scanning mouse movement over my logs bit weird but still good =)

Great Script! Logged Me Out When A Mod Came, Very Nice!

i am a noob on rs can some one help me i got the script text to auto but what do i do with it a program if program what program where and help me :duh:

From: dribler07
i am a noob on rs can some one help me i got the script text to auto but what do i do with it a program if program what program where and help me :duh:

You have to download SCAR 2.03 from:http://freddy1990.com and SRL 3.6 or 3.7 from this site, go to the forums, click on download SRL here, and click the forum that says SRl current release or something like that. If SRL 3.7 doesnt work, you can download 3.6 by going to the forums, clicking on SRL free scripts, clicking on mining, then click on V.E.M. Rk style miner, there will be a download for SRL 3.6 there.

Line 326: [Error] (15097:1): Unknown identifier 'ClickItemName' in script C:\Documents and Settings\Tim\Desktop\SpecialWillowChopper v1.15.scar

and line 326 says:

Wait(300);

Line 699: [Error] (15469:9): Identifier expected in script C:\Documents and Settings\Owner\My Documents\Other\SecetCutterBETA.scar
Failed when compiling
Line 699: [Error] (15469:9): Identifier expected in script C:\Documents and Settings\Owner\My Documents\Other\SecetCutterBETA.scar

lol is this script up to date with scar divi?

I like this, i maybe post proggie later :bart:

like said, works very very well just the "genie" random is still a problem to me
i give you a 9/10:)

Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling:confused:

these scripts do work :mad:

gr8 work gonna try it out soon

this is my greatest report(at noobie account), reason why i stopped it : i needed my pc for a while,the other pc's ware busy.
Special Woodcutter

Time Ran: 1 Hours, 24 Minutes and 12 Seconds
Loads Banked: 18
Ran Away: 0
Ents Avoided: 0
Axes Withdrawn: 0

v1.5 of the script runs really good. I left it on overnight and it got me 600+ willows but I also had a broken axe :(

Awesome script!

Well to be honest, this is my first ever working script, I've tried lots of other scripts but this is the first one that banked and walked back properly. It was working well until 400 logs then the frog random came, it didn't do anything :( and sometimes, when I try to restart, it says "ERROR! cannot find axe in screen" :confused: when there is a axe, in my first invent spot. Except from that, great job :)

Special Woodcutter

Time Ran: 2 Hours 42 Minutes and 03 Seconds
Loads Banked: 19
Ran Away: 4
Ents Avoided: 8
Axes Withdrawn: 2

nice work

Nice script you got here Special.

Special Woodcutter

Time Ran: 1 Hours 32 Minutes and 06 Seconds
Loads Banked: 20
Ran Away: 5
Ents Avoided: 5
Axes Withdrawn: 1

Nice…..

One noob question, where do you start? and does axe need to be equiped when started?

can someone help me this is my first time using macs and i have no clue how to make a script or use one but every time i try to use this one i fill in the info and drag the cross hairs to the rs window and press run but it doesnt work it says it failed to do it

can someone tell me why this wont work?

Line 323: [Error] (15094:4): Unknown identifier 'FindItemName' in script C:\Program Files\SCAR 3.06\Scripts\SpecialWillowChopper v1.5.scar

Line 323: [Error] (15094:4): Unknown identifier 'FindItemName'


how do i solve this :(?

From: purkki
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling:confused:

…. File>> Download SRL.

…. File>> Download Includes.

…. -.-

i get

Line 323: [Error] (15094:4): Unknown identifier 'FindItemName' in script C:\Program Files\scar\scripts\SpecialWillowChopper v1.5.scar

when i run version 1.5, help please?

Failed when compiling
Line 322: [Error] (15442:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\ammultim\Local Settings\Temporary Internet Files\Content.IE5\C5EJGJUD\SpecialWillowChopper%20v1[1].5.scar
Failed when compiling

Nice script ed

AGH why can't I get hese things to work!??!?!?
Error on line 323!!! GRERRRRR

yeah, im geting same error on line 323
HELP!!

doesn't work for me

Line 323: [Error] (15094:4): Unknown identifier 'FindItemName' in script C:\Program Files\SCAR 3.06\Scripts\Runescape\SpecialWillowChopper v1.5.scar

well me gets it also
Like everyone ='(

omg please help us…

Line 322: [Error] (15442:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\user\******************


:confused: :confused: :confused: please!!!!!!!!!

:spot: TIME LEFT ON 2HRS 31MINS 03SECS
WILLOWS CHOPPED 644
LOADS 23
GOOD SCRIPT LEAVING ON OVER NIGHT
(+)(+)=TWO THUMBS UP

Line 322: [Error] (15442:4): Unknown identifier 'FindItemName' in script

:fiery: :fiery: :fiery: :fiery: :fiery: :fiery: :fiery: :fiery: :duh: :duh: :duh: :duh: :( :( :( :( :(

SOMEONE PLEASE…. :( help

why i ccan't dowload it omfg!!!!

wtf!!

Chill out guys every one who gets the error has the wrong version of srl check what version he uses and find a way to download it yourself you dont need to be spoonfed everything you know

Wath version of scar and srl i need?? please answer….

thanks

Hanlix@ scar 2.03 with srl 3.6



heres my proggy, i got owned by a drunken dwarf and didnt have another character to
switch to. but it definatley got me throgugh 3 innings of MLB 2k7:D

******** FOUND FIGHTING RANDOM ********
Found a box, solving…
Question is:
What number is the Star
Answer is 3
******** SOLVED BOX RANDOM ********
Special Woodcutter

Time Ran: 19 Minutes and 49 Seconds
Loads Banked: 7
Ran Away: 1
Ents Avoided: 0
Axes Withdrawn: 0

Special Woodcutter

Time Ran: 19 Minutes and 49 Seconds
Loads Banked: 7
Ran Away: 1
Ents Avoided: 0
Axes Withdrawn: 0

******** FOUND FIGHTING RANDOM ********
******** FOUND FIGHTING RANDOM ********

hey i tried it out and like i started by the willows and all but its really slow to go back to the willows and also it wont bank for me =(

if you could help me out thatd be nice =D

myn says
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling
could you help?

i run script.. logs in n looks for axe and cannot find.. even tho i have it in inventory it come up wit …ERROR! cannot find axe in screen, please put axe in inventory or your equip page and restart the script!.. i have done this .. however still it repeats the same thing over and over again .. help would be much apreciated

AHHHHG IT DOESN"T WORK DISS ME FOR BEING STUPID BUT OMGOMGOMG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Uber chopper man,


Time Ran: 36 minutes and 29 seconds
Loads Banked: 17
Ran away: 0
Ents avoided: 1
Axes withdrawn: 0

I would have done more but it was running at night and runescape decided to update!:fiery: :fiery: :fiery:

I started at bank it didnt walk to willows, a witch attacked, but it didnt run away :S

From: Special Ed
PLEASE POST PROGRESS REPORTS OR ANYTHING YOU COME ACROSS

New Willow Chopper / Banker for Draynor doesn't have a great anti-ban (doesn't auto respond) but I'm working on it but still need some more people to test it.

Works great for me, got it to run for like… 5 Hours without bugging but that was before I added to Progress Report so yea if you want to test it go ahead and please give me lots of feedback.

[V1.1]

Find Trees Faster and avoids Ents better, also banks better with less glitching.
Haven't lost an axe head yet so I don't know if new stuff works, but It should.

[V1.15]

Little more Random… works faster than before.

[New] Problem, If too many people are standing on the bank symbol when it goes to try the bank function it doesn't find it so it continues to try and cut logs, anyone know a good way around this, I was thinking of maybe using a DTM of the bankers and the sides of the bank and make it click in there but I don't think that will work since the MM shifts from time to time.

[V1.5]

Runs smoother and doesn't lag as much, fixed bank problem a little…
Also added status's to see where it was screwing up…

———Progress Reports———

Special Woodcutter

Time Ran: 59 Minutes and 56 Seconds
Loads Banked: 11
Ran Away: 4
Ents Avoided: 3
Axes Withdrawn: 1

"Got sent into a maze, didn't have another character to switch too."
——————————————————————–

Special Woodcutter

Time Ran: 33 Minutes and 57 Seconds
Loads Banked: 6
Ran Away: 1
Ents Avoided: 2
Axes Withdrawn: 0

"Lost axe head and couldn't find it… I don't know why it couldn't find it."
——————————————————————–

Special Woodcutter

Time Ran: 2 Hours 51 Minutes and 32 Seconds
Loads Banked: 24
Ran Away: 8
Ents Avoided: 6
Axes Withdrawn: 1

"Don't know just started wigging out."
——————————————————————–

Special Woodcutter

Time Ran: 46 Minutes and 32 Seconds
Loads Banked: 8
Ran Away: 2
Ents Avoided: 2
Axes Withdrawn: 0

"Had to turn it off…"
——————————————————————–

Special Woodcutter

Time Ran: 4 Hours 12 Minutes and 52 Seconds
Loads Banked: 46
Ran Away: 17
Ents Avoided: 11
Axes Withdrawn: 3

"Got teleported to Lumbridge Cellar" P.S. Longest Report EVER! YAY!

yeah hi i dont know for sure so im gona ask does this script has repair axe thing if get dmgd and lost axe head finder? ty

I keep getting this error.

Line 323: [Error] (15101:4): Unknown identifier 'FindItemName' in script C:\DOCUME~1\Turnbull\LOCALS~1\Temp\SpecialWillowChopper v1.5.scar

Any ideas? ><

Time Ran: 3 Hours, 34 Minutes and 59 Seconds
Loads Banked: 73
Ran Away: 8
Ents Avoided: 2
Axes Withdrawn: 1

******** FOUND FROG RANDOM ********
******** FROG RANDOM MISSED ********

working nicely!:spot:

but… when i was around hard trouble finding the tree spirit i fixed it and it kept running nicely also frogged mixed so it stop was in shower :(

anywas other than that! cant wait till night so i can do overnight

-has some problems getting into bank it misclicks of something

but awsome job im in love :D:p

LoadTarget:= 5; //Number of loads until it switches characters

there a way just to have it just keep cutting?

or should i just put a high number?

it started to mess with me last night it didn't just kept cutting…

where do u get the incudles from

i just put the script and ran it… try file>download includes if thats what ur talking about :D

Line 322: [Error] (15442:4): Unknown identifier 'FindItemName' in script C:\Program Files\SCAR 2.03\Scripts\SpecialWillowChopper v1.5.scar

now what?

Line 323: [Error] (15101:4): Unknown identifier 'FindItemName' in script

any tips?

From: agent17
Line 322: [Error] (15442:4): Unknown identifier 'FindItemName' in script C:\Program Files\SCAR 2.03\Scripts\SpecialWillowChopper v1.5.scar

now what?

omg, like 8 out of 10 people have this error! please help!

its works fine just when my guy fighting something it doesnt run away

about to give it ago, what sort of anti detection has it got??

Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling


im a first time scar user.. so dont know if im doing something wrong.

From: Ip1k1e1r1
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling


im a first time scar user.. so dont know if im doing something wrong.

you might need to update your scar to with srl 2.6 use the search toolbar ull be able to find it or u can download scar 2.03 with the 2.6 which is easier… just search a bit

arggg

Procedure DeclarePlayers thats what i get all the way at the bottom :(

scriipt was working fine like 2 days ago

Line 323: [Error] (15101:4): Unknown identifier 'FindItemName' in script C:\Program Files\SCAR 3.06\Scripts\SpecialWillowChopper v1[1].5.scar

thats what i get when i try to run it….where do i find where the iden. FindItemName is supposed to be?

Line 323: [Error] (15101:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\*****\Desktop\SpecialWillowChopper v1.5.scar

….

When I press play it just sits in the bank does nothing only sayin :Compas found…

OMG Peoples who have errors like this "Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL.SCAR does not exist." Simply reinstall SRL!

From: erkki
not working scar say for me:
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

Um… dude get SRL…:duh:

From: Markeh1
When I press play it just sits in the bank does nothing only sayin :Compas found…

Download SRL 3.81

or

go into SCAR folder
Go to SRL then SRL then includes then core then Login.scar
Look for…

Result := (GetColor(421, 480) = 16777215);

change the 421 to 422…
so its…

Result := (GetColor(422, 480) = 16777215);

save exit then re-run script…

thx alot fer script

i cant play them it say's Line 274: [Error] (1910:11): Unknown identifier 'FixD' in script C:\PROGRAM FILES\SCAR 3.05\includes\srl\srl\core\Math.scar
i cant open another script cause its the same bug:S can you help me?

From: 71runemaker
Download SRL 3.81

or

go into SCAR folder
Go to SRL then SRL then includes then core then Login.scar
Look for…

Result := (GetColor(421, 480) = 16777215);

change the 421 to 422…
so its…

Result := (GetColor(422, 480) = 16777215);

save exit then re-run script…

It was already 422 \= Guess im downloading SRL 3.81…

Edit: Downloaded SRL 3.81 doesn't even work It gets a Compiling error.

Line 323: [Error] (15137:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\Sébastien\Mes documents\SpecialWillowChopper v1[1].5.scar
Help Plz

Line 323: [Error] (15137:4): Unknown identifier 'FindItemName' in script C:\Program Files\SCAR 3.06\Scripts\Woodcutter.scar

well its got the best willow finder ive used
but it puts you right next to the dark mages
and it takes 4 ever 4 it to run away
and last i wound up top of the wizzards tower

Line 323: [Error] (15137:4): Unknown identifier 'FindItemName' in script

i get this error

lines 320 - 332 below:
begin
repeat
if(FindItemName('Wil')or(FindItemName('ogs')))then
begin
PP:= (PP + 1);
Mouse(x,y,1,1,false);
Wait(500 + Random(100));
ChooseOption(BX,BY,'All')
Banked:= (Banked + 1);
Wait(200 + Random(100));
end;
until((not(FindItemName('Wil'))or(not(FindItemName('ogs')))or(PP >= 2)));
end;

Same

tryed many but nothing works like urs man!

Time Ran: 3 Hours, 15 Minutes and 45 Seconds
Loads Banked: 78
Ran Away: 3
Ents Avoided: 3
Axes Withdrawn: 0

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL Randoms Report |
| www.villu-reborn.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Logged in : 1 |
| Fight Random : 3 |
| Talking Random : 2 |
| Lamp Solved : 4 |
| New Box[es] Solved : 1 |
| Mod encountered : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/


3 characters

reason it stoped was that i lost internet connect :D wireless ftw

Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\Alex Norris\My Documents\scripts\SpecialWillowChopper v1[1].5.scar
Sadness :(

From: norrisemoe
Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\Alex Norris\My Documents\scripts\SpecialWillowChopper v1[1].5.scar
Sadness :(

hey make sure ur using the right scar

2.03 with srl 3.6 get it at www.freddy1990.com

hi i keep getting this messeg that says:: failed when compiling
line: 309 [error] 5534:11 unkown identfier findcolorcircled in script c:………scar/includes/srl/srl/core/color.scar

Failed when compiling
Line 322: [Error] (15442:4): Unknown identifier 'FindItemName' in script C:\DOCUME~1\BIJANM~1\LOCALS~1\Temp\SpecialWillowChopper v1.5.scar:fiery: :( :mad: No scripts ever work for me :(

hi i get this error and im not sure gow to fix i tried it using scar 3.06 and 3.11 with srl 3.81

Failed when compiling
Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script C:\Program Files\SCAR 3.11\Scripts\SpecialWillowChopper v1.5.scar

can anyone help?

Failed when compiling
Line 326: [Error] (15140:1): Unknown identifier 'ClickItemName' in script C:\Documents and Settings\Owner\Desktop\scripts\SpecialWillowChopper v1.15.scar

wtf ive treid almost every script here nothing works ive been trying to figure it out for almost a fuking year Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\Mike\Desktop\SpecialWillowChopper v1.5.scar and i havent found a single script that ever worked for me please help omg:fiery:

Thanks:rolleyes:

Line 323: [Error] (15137:4): Unknown identifier 'FindItemName' in script
can anyone help and also does anyone no were to download a 3.6 srl for 2.3 sca.
and im usin scar 3.6 div for this script

When it compiles i get this error.
Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script

trying it out.. :D

sounds promising

bummer i got the same error

"Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script"

=/ any thoughts?

i tried your script but it said
Line 323: [Error] (15039:4): Unknown identifier 'FindItemName' in script

plz help me fix , your script sounds awesome

From: bangali
i tried your script but it said
Line 323: [Error] (15039:4): Unknown identifier 'FindItemName' in script

plz help me fix , your script sounds awesome

same exact thing for me
Line 323: [Error] (15137:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\test\Desktop\SpecialWillowChopper v1.5.scar
wat to do this looks really good… = (
plz help soon

Failed when compiling
Line 323: [Error] (15137:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\**** ******\Bureaublad\Scar dingen\SpecialWillowChopper v1[1].5.scar

Help plz?

failed when compiling
Line 325: [Error] (15139:1): Unknown identifier 'ClickItemName' in script C:\Program Files\SCAR 3.11\Scripts\Runescape scripts\SpecialWillowChopper v1[1].15.scar

help please your script sounds really good

and again on a different verison!!!argh no scripts work for me please help!!

Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script C:\Program Files\SCAR 3.11\Scripts\Runescape scripts\SpecialWillowChopper v1[1].5.scar

please HELP ASAP!!!

line 322 on 1.5 doesnt work

um wut dos unknown identfier it keeps comeing up on all of em i am getting tierd of looking for one tat works and this looks good i just want to know how to fix unnown identfier

[QUOTE=steve's_sky1;166629]and again on a different verison!!!argh no scripts work for me please help!!

Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script C:\Program Files\SCAR 3.11\Scripts\Runescape scripts\SpecialWillowChopper v1[1].5.scar

please HELP ASAP!!!

Use scar 2.03 with srl and its works fine for all u guys saying error Unknown identifier.

when i tried to run the program i got this error
Line 323: [Error] (15137:4): Unknown identifier 'FindItemName' in script

any suggestions?

umm… everytime i run the script it dosen't say anything on the debug box except found compass.. then it just sits there untill i log out..

Failed when compiling
Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\Knol\Bureaublad\rs\sythe\SpecialWillowChopper v1[1].5.scar

it does this when i use 2.03 and 3.11

any sugestions?

I can never get it to even log in… Every time it says it failed while compiling…could someone plz help me I cant get a single script not to say this.

any help please? i keep trying it and it just sits there…-L-"

Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\Khaos\Desktop\SpecialWillowChopper v1.5.scar

Mine doesnt work. It says:

Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script

What's wrong?

"Line 322: [Error] (15442:4): Unknown identifier 'FindItemName'"
that is the error message i get when i run, it plz somoeon help, it would be appreciated, thx

From: n0motion
Use scar 2.03 with srl and its works fine for all u guys saying error Unknown identifier.

i used it and now i get this
"g
Line 325: [Error] (15445:1): Unknown identifier 'ClickItemName' in script"

(yes w/ a "g")

plz help me when i run the scrip an error comes and it says
"ling
Line 325: [Error] (15445:1): Unknown identifier 'ClickItemName' in script"
help would be appreciated thankx

Failed when compiling
Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script

please help

Line 323: [Error] (15137:4): Unknown identifier 'FindItemName' in script C:\Documents and Settings\omg\Lokala inställningar\Temporary Internet Files\Content.IE5\414NSRSZ\SpecialWillowChopper%20v1[1].5.scar

Help? :S

Wow i didn't realize people where still using this script… sorry guys, this doesn't work anymore, I thinking about remaking it so please don't post anymore here until I release the new one, sorry for the neglect, I didn't even think people used this.

Line 322: [Error] (15136:4): Unknown identifier 'FindItemName' in script C:\DOCUME~1\Family\LOCALS~1\Temp\SpecialWillowChopper v1.5-3.scar

help please?

dangit i was trying it yesterday

Wont work says
Line 323: [Error] (15137:4): Unknown identifier 'FindItemName' in script C:\Program Files\SCAR 3.06\SpecialWillowChopper v1.5.scar

i download the third one and this popup wat is it??

User specified a new RS window
Include file C:\Program Files\SCAR 2.03\includes\srl/srl.scar does not exist.
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

Are you guys FUCKING RETARDED???

If I were in charge, I'd ban all of the noobs in wizzup?'s essence miner thread and here…

Hi, I would really like some Gay Porn and Spam, if you have this, Please send it to…. [EMAIL="boxing_charlie1@hotmail.com"]boxing_charlie1@hotmail.com[/EMAIL] thanx

This is confusing I tried doing the auto but it says there's an error on line 323 but on line 323 it just says begin in bold letters, it also says "unknown
identifier 'FindItemName' ". Right above 323 on line 324 it says
"if(FindItemName('Wil')or(FindItemName('ogs')))then" i don't know what the
error is that its talking about can someone please help me out?

HEY CRACK HEADS, READ!

And boxingcharlie1, you broke three rules in your first post.
1. Off-topic
2. No trading/selling/buying
3. Good grammar

From: Special Ed
Wow i didn't realize people where still using this script… sorry guys, this doesn't work anymore, I thinking about remaking it so please don't post anymore here until I release the new one, sorry for the neglect, I didn't even think people used this.

From: bullzeye95
Are you guys FUCKING RETARDED???

If I were in charge, I'd ban all of the noobs in wizzup?'s essence miner thread and here…

From: bullzeye95
HEY CRACK HEADS, READ!

And boxingcharlie1, you broke three rules in your first post.
1. Off-topic
2. No trading/selling/buying
3. Good grammar

ROFL, I think I will close this, because it's obvious they can't read….Ed, just PM if you update this and want it reopened….

~RAM