SRL Archive - News and General

I've set up my pre-release repository for SCAR, I'll be putting pre-release versions up in there from now on rather than releasing them like I did before. This will allow for a smoother transition between pre-release versions and such as I can easily update it. Also bugs can be identified more accurate, version wise as more versions can be identified by revision now.

The repository is located here: http://freddy1990.com/svn/scarprerelease

Changelog: http://freddy1990.com/svn/scarprerelease/Changelog.txt

Note that I fixed rs_GetUpChars already, so for all 3.20 users, it'd be best to use this current release. It's also a bit more Vista friendly, I've written a new window selector.

Yay, for freddy!

Sauce nyaa~!

I'll update the other fonts as soon as I can, but I don't have time right now

GJ… Thanks much.

Cheers, Freddy!
Good work, mate.

Nevermind, did it. Great job on the update Freddy!

~DeSnob

The window selector doesn't draw right when targeting on-top windows. Are you creating a new, transparent window and drawing on that?

From: bullzeye95
The window selector doesn't draw right when targeting on-top windows. Are you creating a new, transparent window and drawing on that?

Fixed, uploading.

Quick release :D!, downloading in a minute :)

Awesome =) CountBitmap fixed right in time, when I need it.

Thanks Freddy, you're the Best! :D

<3. The window selector was being very gay before (I have Vista). Now it is really fast :D.

{$DEFINE TEST}

should I just take the new Scar.exe and save it over Scar 3.20? and then move all the folders, like fonts and everything into the Scar folder to replace the old ones? If that's not what I'm supposed to do please explain.

EDIT: Da 0wner, same here, I hated how slow it'd go, it was very slow and jumpy when it'd select the window, and on XP it was fast and smooth.

Hey nice job. Thank you.

From: Da 0wner
<3. The window selector was being very gay before (I have Vista). Now it is really fast :D.

I had to do that because I use Windows 7 as development OS now, which has the same problem there as Vista, this was a good motivation to do it properly for a change, I've tried to do this before, but I never really got it done perfectly, always some crap messing it up. So expect the final 3.21 to be way more Vista/7 friendly :)

From: Baked0420
should I just take the new Scar.exe and save it over Scar 3.20? and then move all the folders, like fonts and everything into the Scar folder to replace the old ones? If that's not what I'm supposed to do please explain.

EDIT: Da 0wner, same here, I hated how slow it'd go, it was very slow and jumpy when it'd select the window, and on XP it was fast and smooth.

You'll only need the new scar.exe, the rest aside from the changelog is the same atm

ok so just copy the Scar.exe from where I did the SVN update to and save it where my old Scar.exe is?

EDIT: By the way, thanks for the help and thanks for making Alpha version of 3.21 :)


And yayyy more vista friendly scar :D

From: Baked0420
ok so just copy the Scar.exe from where I did the SVN update to and save it where my old Scar.exe is?

Yea, that should do it for now :)

Please add a function for changing the clients title? Like you do in SCAR's file menu: "Client -> Change Client Title…"

I would appreciate it :)

EDIT: Oh wow, good job on the client specification :D I love it! Muuuch more vista friendly indeed ;)

From: Zyt3x
Please add a function for changing the clients title? Like you do in SCAR's file menu: "Client -> Change Client Title…"

I would appreciate it :)

Woah that's cool, I knew you could change Scar's Title, but I never knew you could do it with the client it has activated. Was there a function to do this in 3.20 or 3.15B? I think that'd be a really cool function so you could change client title's while the script's running.

From: Baked0420
Woah that's cool, I knew you could change Scar's Title, but I never knew you could do it with the client it has activated. Was there a function to do this in 3.20 or 3.15B? I think that'd be a really cool function so you could change client title's while the script's running.

No, there was not a function like that in previous versions :p
Yeah, I know it's awesome :D I use it for changing the DebugImgWindow when making games (like the game's name is "Freddy0wnzor" then it's better to have "Freddy0wnzor" as title instead of "Debug Image" xD)

Really loving the new Crosshair! :p

But, do you think you could make it possible to let user change the color of it? (Like, the current Red (255?) to Blue (16711680)) Maybe a new section to options, to configure what it looks like (thickness, color)? That would be really nice.

From: Zyt3x
No, there was not a function like that in previous versions :p
Yeah, I know it's awesome :D I use it for changing the DebugImgWindow when making games (like the game's name is "Freddy0wnzor" then it's better to have "Freddy0wnzor" as title instead of "Debug Image" xD)

yea… or if your mixster and watching your porn and afraid your mom's going to walk in, and see the bar at the bottom and porn in the name, you can activate the window and change it to Runescape lol :p jk. I hope mixster sees this.

But yea, I'd use it when I auto, like I like to change scar to how many loads I've done and if I'm like fishing, how many spots in the inventory have fish, but sometimes it's too big, so I could change scar to the inventory amount and then the client window to how many fish are in the inventory, split it up.

From: Freddy1990
I'll update the other fonts as soon as I can, but I don't have time right now

Talk with Zeph, he got all of them already.

Thanks aswell.

ILY ty freddy.

From: Baked0420
yea… or if your mixster and watching your porn and afraid your mom's going to walk in, and see the bar at the bottom and porn in the name, you can activate the window and change it to Runescape lol :p jk. I hope mixster sees this.

But yea, I'd use it when I auto, like I like to change scar to how many loads I've done and if I'm like fishing, how many spots in the inventory have fish, but sometimes it's too big, so I could change scar to the inventory amount and then the client window to how many fish are in the inventory, split it up.

Yeah, It would be very useful :P

Freddy: Be sure to add this :)

did you also fix the mp3's problem with function CreateMusicPlayer: TMusic;

i hope you did :(!

E: Nope… still the same error:duh:

From: N1ke!
Talk with Zeph, he got all of them already.

Thanks aswell.

I know he does, but I tend to do things myself, I don't like relying on other people's work too much

From: Tickyy
did you also fix the mp3's problem with function CreateMusicPlayer: TMusic;

i hope you did :(!

E: Nope… still the same error:duh:

Not yet, everything in due time…

From: Freddy1990
I know he does, but I tend to do things myself, I don't like relying on other people's work too much



Not yet, everything in due time…

Trusting the work of one of the head developers got to be real hard…
Not to give critic on your work, but if you actually let people help you'll see that things gets done much faster.

Good job
I found 1 error when using reflection:

Line 661: [Error] (22126:58): Type mismatch in script C:\Program Files\SCAR 3.21\includes\SRL\SRL\Reflection\Characters.Scar

I don't get that.

Have you tried updating to Dev Reflection?

From: Da 0wner
I don't get that.

Have you tried updating to Dev Reflection?

I have SRL Dev but not the Reflection Dev.
Where would I get the reflection Dev?

From: Freddy1990
I know he does, but I tend to do things myself, I don't like relying on other people's work too much

Don't kill me for saying this, but why have you then been so interested in buying components for future versions of SCAR? I'm, for one, guessing that it counts as relying on other peoples' work.

From: TRiLeZ
I have SRL Dev but not the Reflection Dev.
Where would I get the reflection Dev?

http://scardevreflection.googlecode.com/svn/trunk

From: King of Knives
Don't kill me for saying this, but why have you then been so interested in buying components for future versions of SCAR? I'm, for one, guessing that it counts as relying on other peoples' work.

That is something completely different… If I'd have to develop every component for SCAR myself I'd be done by the time RS has died out…

From: Baked0420
http://scardevreflection.googlecode.com/svn/trunk

Already using that :/ SCAR 3.20 works fine though
And yes Im using the current rev.

and besides, it's his work, let him do it how he wants, if he doesn't want help so be it. I know not every scripter just lets anyone join in on helping them with their script. But when do you think you'll be able to get your chars done?

Nice, I really like the new window selector

NEW Specify client FTW. :D

Thanks Freddy for your hard work. And all you people complaining about it…maybe you should make your own SCAR and we can see how well that works out for you. Just be thankful he does this for free, and shut up.

From: Freddy1990
I know he does, but I tend to do things myself, I don't like relying on other people's work too much



Not yet, everything in due time…

Well Freddy I got all the fonts updated and waiting to be added. Just buzz if you need them…

From: IceFire908
NEW Specify client FTW. :D

Yea, its good.
The old one took up to 5 seconds to recognise the client. this one is great.

Also, why you're at it can you fix the SRL updating problem?

[QUOTE=Dan's The Man;600197]Also, why you're at it can you fix the SRL updating problem?

I can't do everything at once, that's a problem with my php scripts, not SCAR, be patient

From: Tickyy
did you also fix the mp3's problem with function CreateMusicPlayer: TMusic;

i hope you did :(!

E: Nope… still the same error:duh:

It's fixed, have fun ;)

From: Baked0420
and besides, it's his work, let him do it how he wants, if he doesn't want help so be it. I know not every scripter just lets anyone join in on helping them with their script. But when do you think you'll be able to get your chars done?

Well if someone handed me the only way to do somthing, I wouldn't not use it.

is the optin menu font fixed with the new pre release

From: J_Pizzle
is the optin menu font fixed with the new pre release

yes, it is

EDIT: I've finished updating the SmallChars font, it now contains every possible character no matter how trivial, only Jagex seems to have messed up with the Ò character as it's shown as Ó in RS, so I didn't add that one.

Freddy, what's left to update?

From: DeSnob
Freddy, what's left to update?

I still have tons of characters for charsets left to do and some requests to fill in + finish the ACA integration… Kinda going over and beyond for them characters, lol SmallChars already has every possible char there is even though some probably have never been used by anyone before :p

From: Freddy1990
I still have tons of characters for charsets left to do and some requests to fill in + finish the ACA integration… Kinda going over and beyond for them characters, lol SmallChars already has every possible char there is even though some probably have never been used by anyone before :p

Doesn't that slow down the OCR quite a bit. Searching for chars that are never used.

From: ZephyrsFury
Doesn't that slow down the OCR quite a bit. Searching for chars that are never used.

Not if you don't include them, the thing is though, they can be used, so… I always think it's better to prepare for what might come than to deal with it then :p

are you sure the option menu is fixed cause it still doesn't work

You sure you have the latest revision of SRL J_Pizzle?

From: ian.
You sure you have the latest revision of SRL J_Pizzle?

ya i updated with the open dev thing i used zaszs updater

Alright, then the problem seems to be caused by SCAR. Fonts may have not been updated. Right now is not a time to script or auto, because things continue to be updated. Try again once a stable SCAR 3.21 is out (non-prerelease) and SRL is fixed.

Who the hell is ian. and why did he steal my name? :/

What the hell!?! Who are you!!!!?

Omfg.

^
Funny troll is funny.

Ontopic: <3 you Fredster.

I get "missing bass.dll" error :<
If I grab the bass.dll somewhere off the internet I get another error of "missing bassflac.dll".

All these DLL's start with bass :S

Getting a few out of memory errors in text.scar after running a script for a few hours

From: ian.
Alright, then the problem seems to be caused by SCAR. Fonts may have not been updated. Right now is not a time to script or auto, because things continue to be updated. Try again once a stable SCAR 3.21 is out (non-prerelease) and SRL is fixed.

SCAR 3.21 Alpha is more stable than 3.20, lol

From: 99_ aka ian.
Who the hell is ian. and why did he steal my name? :/

I lol'ed.

Just made and added a fontset for the chars on the loginpage saying like "Create Account".

From: The Claw
Getting a few out of memory errors in text.scar after running a script for a few hours

Hmm, that might be because of the incrased number of characters, however, no matter how hard the strain they'd cause, that shouldn't happen unless there was some memory leak, so I suppose I'll get my ass busy on finding it…

YAY, Thank goodness, :p I had Vista.

I have one question, I don't know if it's a bug or what, but ever since I got the new version I can't just "double click" on my script file to open it. If I do so, it just opens SCAR without a script written in it. I have to reopen the script from SCAR.

I don't know if it's me, or SCAR, but I haven't been able to fix it. :confused:

Thanks.

From: Coh3n
I have one question, I don't know if it's a bug or what, but ever since I got the new version I can't just "double click" on my script file to open it. If I do so, it just opens SCAR without a script written in it. I have to reopen the script from SCAR.

I don't know if it's me, or SCAR, but I haven't been able to fix it. :confused:

Thanks.

I had that problem once to, not with this version tho. I think i re-instaled everything and it worked againg :p

From: tico2
I had that problem once to, not with this version tho. I think i re-instaled everything and it worked againg :p

Hmm okay thanks, I'll try that out. :)

EDIT: I tried it, and it didn't work. :(

From: Floor66
I get "missing bass.dll" error :<
If I grab the bass.dll somewhere off the internet I get another error of "missing bassflac.dll".

All these DLL's start with bass :S

Heres how to do it: Download SCAR 3.15, then copy everything from SCAR 3.21Alpha-folder over to SCAR 3.15-folder

From: Coh3n
Hmm okay thanks, I'll try that out. :)

EDIT: I tried it, and it didn't work. :(

To bad :(, well probably the creator of scar 3.21 alpha knows what the problem is ;)

From: Zyt3x
Heres how to do it: Download SCAR 3.15, then copy everything from SCAR 3.21Alpha-folder over to SCAR 3.15-folder

Actually that's not a bad idea, that would fix the problem I have opening the scripts also, thanks. :)

From: tico2
To bad :(, well probably the creator of scar 3.21 alpha knows what the problem is ;)

I hope so. :)

From: Zyt3x
Heres how to do it: Download SCAR 3.15, then copy everything from SCAR 3.21Alpha-folder over to SCAR 3.15-folder

Or just go to Tools and press "Associate .scar files"?

ive had a problem where SCAR stops responding every time i close SCAR after running a script since a while ago for all versions. Its quite annoying since i have to manually kill the process and it doesnt save settings and stuff. Sadly I'm probably alone in my plight so…

Hey Freddy, can you possibly find sometime to increase the amount of numbers StrToInt can read? Currently it only reads upto 9 digits, after that it returns -1. - Thanks!



~NS

From: Zyt3x
Heres how to do it: Download SCAR 3.15, then copy everything from SCAR 3.21Alpha-folder over to SCAR 3.15-folder

Didn't work :(

From: Nadeem
Hey Freddy, can you possibly find sometime to increase the amount of numbers StrToInt can read? Currently it only reads upto 9 digits, after that it returns -1. - Thanks!



~NS

Pretty sure he said somewhere it's a problem with Delphi not letting you add custom amounts of digits or something like that. Maybe he could change it to Int64? :/ I'm not really sure.

And Floor, did you try Tools > Associate .scar files? :)

IntToStr does accept Int64.

I got the bass dll error :(.

From: Hermen
I got the bass dll error :(.

Check out from the latest revision, run fixscar.exe (make sure you run it as administrator or it will crash).

Btw, everyone, please post your suggestions or bugs on my forums so I don't miss them…

From: Da 0wner
IntToStr does accept Int64.

Im talking about StrToInt, IntToStr works fine.

Ian, if thats true then that sux :(



~NS

Oh sorry, misread it. I'm going to try something, hold on.

Edit: I tried a buffer…doesn't work..:(.

From: Freddy1990
Or just go to Tools and press "Associate .scar files"?

Oh, wow. You have so many useful functions that I don't know about ;D
You added the change client title procedure?

That stuff has been there for a while…

From: Da 0wner
That stuff has been there for a while…

Yea, like since SCAR 2 :)

From: Zyt3x
Oh, wow. You have so many useful functions that I don't know about ;D
You added the change client title procedure?

Not yet, but please post suggestions on my forums as I said, I can't keep track of them this way…

thanks alot freddy, had a few problems at first but then i found a very good "how to obtain scar 3.21" tutorial and im all good. just srl now… :)
your the bomb!

Hey Freddy, is it possible to add in support for recursion, or is that just something the current script engine can't handle?

From: senrath
Hey Freddy, is it possible to add in support for recursion, or is that just something the current script engine can't handle?

recursion?

From: senrath
Hey Freddy, is it possible to add in support for recursion, or is that just something the current script engine can't handle?

Erm, i'm pretty sure it does support recursion if it's what i think it is..

BTW, Freddy1990: http://en.wikipedia.org/wiki/Recursion_(computer_science)

-ignore this-

It does allow for recursion!!

function RecursionTest(I: Integer): Integer;
begin
  if (I < 1) then
  begin
    Result := I;
    Exit;
  end;
  Writeln(I);
  Result := RecursionTest(I - 1);
end;

begin
  RecursionTest(10);
end.

~NS

Ah, whoops. I forgot to put in an exit statement. Silly me. I'm much more used to working with Java than SCAR.

From: senrath
It doesn't. Try running this:

program New;
function RecursionTest(i: Integer):Integer;
begin
  if i <= 1 then Result := 1;
  Result := i + RecursionTest(i - 1);
end;
begin
  RecursionTest(10);
end.

Ohhhh. You mean that!!

Yes, that would be useful :)

[QUOTE=Dan's The Man;602355]Ohhhh. You mean that!!

Yes, that would be useful :)[/QUOTE]

As it turns out, recursion does work, as Nadeem just pointed out. I was just messing up the code, as I'm more used to Java than SCAR.

lol yes, I think thats already been in SCAR for a very long time. QuickSort's algorithm uses recursion.



~NS

From: senrath
As it turns out, recursion does work, as Nadeem just pointed out. I was just messing up the code, as I'm more used to Java than SCAR.

Lol.

I was just playing around my self and discovered you could, then i was going to reply but Nadeem already did it :p

From: Freddy1990
Check out from the latest revision, run fixscar.exe (make sure you run it as administrator or it will crash).

Btw, everyone, please post your suggestions or bugs on my forums so I don't miss them…

<3
Checking out svn atm.

EDIT:
Works! <3

From: Floor66
<3
Checking out svn atm.

EDIT:
Works! <3

:)


Recursion has always worked…

What does fixscar.exe do? is it for people with the .dll errors?

Yeah, it downloads the missing DLLs.

Also, possibly, could you please add in capablities in SCAR? Or is that just not possible?

e.g:

function IsIn(s: String): Boolean;
begin
  Result := s in ['A'..'z'];
end;

:)

[QUOTE=Dan's The Man;602497]Also, possibly, could you please add [b]in[/b] capablities in SCAR? Or is that just not possible?

e.g:[highlight=scar]
function IsIn(s: String): Boolean;
begin
Result := s in ['A'..'z'];
end;

:)

Freddy if you could do that, it'll be AWESOME :D



~NS

From: Nadeem
Freddy if you could do that, it'll be AWESOME :D
~NS

That's just not possible…

From: Freddy1990
That's just not possible…

Thats not pascal ;)

From: Freddy1990
That's just not possible…

It's a pity. I'd love to be able to do for..in loops.

From: Nava2
Thats not pascal ;)

Well, I didn't write the script engine so don't blame me.

You can achieve a similar result by using cases:

program New;

function InStr(s: Char): Boolean;
begin
  case s of
    'A'..'z': Result := True;
    else
      Result := False;
  end;
end;

begin
  WriteLn(BoolToStr(InStr('a')));
  WriteLn(BoolToStr(InStr('!')));
end.

From: nielsie95
You can achieve a similar result by using cases:

program New;

function InStr(s: Char): Boolean;
begin
  case s of
    'A'..'z': Result := True;
    else
      Result := False;
  end;
end;

begin
  WriteLn(BoolToStr(InStr('a')));
  WriteLn(BoolToStr(InStr('!')));
end.

WTH.. Is this new in SCAR? I swear I tried that like last month and it never worked :(

oh yea.. so Freddy.. Umm Maybe ASM code support? xP



~NS

From: Nadeem
WTH.. Is this new in SCAR? I swear I tried that like last month and it never worked :(

oh yea.. so Freddy.. Umm Maybe ASM code support? xP
~NS

ive said it before and ill say it again…Nielsie95 is magic.

|Pest Controller

|Worked for : 10 Seconds

|Location: Choosing world 144

|Wins: 0


|Zeals: 0


[Runtime Error] : Exception: Access violation at address 0071FE7F in module 'scar 3.21.exe'. Read of address 00000000 in line 301 in script C:\Documents and Settings\admin\Desktop\SRL/SRL/Core/Text.scar



what's going on?

From: jesus45











|Pest Controller

|Worked for : 10 Seconds

|Location: Choosing world 144

|Wins: 0


|Zeals: 0


[Runtime Error] : Exception: Access violation at address 0071FE7F in module 'scar 3.21.exe'. Read of address 00000000 in line 301 in script C:\Documents and Settings\admin\Desktop\SRL/SRL/Core/Text.scar



what's going on?

Try running it as admin.

From: jesus45





|Pest Controller
|Worked for : 10 Seconds
|Location: Choosing world 144
|Wins: 0

|Zeals: 0

[Runtime Error] : Exception: Access violation at address 0071FE7F in module 'scar 3.21.exe'. Read of address 00000000 in line 301 in script C:\Documents and Settings\admin\Desktop\SRL/SRL/Core/Text.scar



what's going on?

The OCR is having difficulties with the newly added characters for RS, I'm working on a solution. What version of SRL are you using?

I have the same access violation problem. Ive tried running as ADmin, i used Dev SRL.

yeah i am using the same thing

From: Freddy1990
It's fixed, have fun ;)

<3 !!!

From: Nadeem
oh yea.. so Freddy.. Umm Maybe ASM code support? xP
~NS

Pascal Script (SCAR's Scripting Engine) isn't exactly the most bug-free engine I know, but it is the only decent and open source one for Pascal. It is said to have support for Delphi, Kylix and FPC, but FPC support is still very experimental.

My point: If you want something in the engine, leave a post/mail at their mailing list, and someone may add it.

From: Wizzup?
Pascal Script (SCAR's Scripting Engine) isn't exactly the most bug-free engine I know, but it is the only decent and open source one for Pascal. It is said to have support for Delphi, Kylix and FPC, but FPC support is still very experimental.

My point: If you want something in the engine, leave a post/mail at their mailing list, and someone may add it.

Oh I see, I always thought kaitnieks and freddy developed the engine :/ ~ np I guess this is good enough for now though :)



~NS

Hey,
I'm a bit scuppered with what to do here mate.
I'm wanting to get Macroing again, I have downloaded the new Scar.exe, and I believe now that I need to download the new Font's folder etc etc..

However for some silly reason none of my PC's like SVN, meaning I have to download everything manually, now for SRL its not really a problem 100 files ish doesnt take to long.
But 100+ for each Font pack etc etc is just silly..

How can I go about getting the new client without having to use SVN or download manually, can you upload an Installer as you have for previous clients..

Oh here is my SVN error message incase you know what's wrong with it?

Error: OPTIONS of 'http://freddy1990.com/svn/scarprerelease': 200 OK (http://freddy1990.com)

Cheeers
Sammm

I use 3.21 Alpha now, and I set it to be the default program when I open a .scar file, but when I open a .scar file, it just says

Program New;
begin
end.

It's not a problem for me, really, I just File > Reopen the file I want, but yeah, just thought you should know. :) (Might just be my stupidity, but I wanted to check ;))

From: samm
Hey,
I'm a bit scuppered with what to do here mate.
I'm wanting to get Macroing again, I have downloaded the new Scar.exe, and I believe now that I need to download the new Font's folder etc etc..

However for some silly reason none of my PC's like SVN, meaning I have to download everything manually, now for SRL its not really a problem 100 files ish doesnt take to long.
But 100+ for each Font pack etc etc is just silly..

How can I go about getting the new client without having to use SVN or download manually, can you upload an Installer as you have for previous clients..

Oh here is my SVN error message incase you know what's wrong with it?

Error: OPTIONS of 'http://freddy1990.com/svn/scarprerelease': 200 OK (http://freddy1990.com)

Cheeers
Sammm

Try disabling your firewall/antivirus…

From: 99_ aka ian.
I use 3.21 Alpha now, and I set it to be the default program when I open a .scar file, but when I open a .scar file, it just says

Program New;
begin
end.

It's not a problem for me, really, I just File > Reopen the file I want, but yeah, just thought you should know. :) (Might just be my stupidity, but I wanted to check ;))

Works fine for me… Be sure to do this by pressing "Associate .scar files" in the tools menu though…

With the RC i got this error with any script:

Failed when compiling
Line 24: [Error] (182:1): Duplicate identifier 'FriendChars' in script C:\Users\Sap\Desktop\scarprerelease\includes\SRL/SRL/Core/Globals.scar

But with the SCAR 3.21 Beta everything is fine. Just wanted to share that its a bug maybe ;)

From: sapetto
With the RC i got this error with any script:

But with the SCAR 3.21 Beta everything is fine. Just wanted to share that its a bug maybe ;)

SRL isn't compatible with the latest update, I'll fix that in SRL once I get a new account for the dev SVN or whena notehr dev uploads my patches to the repos.

You can apply the patches yourself with TortoiseSVN if you want though…

http://pastebin.com/m681f383f

Just so you know :)

That was a major crash I got.

From: Freddy1990
Try disabling your firewall/antivirus…

Already tried, I have no idea what it could be, there is simply nothing blocking/denying it access, I've disabled it all.
I've reinstalled SVN.
I just don't know what is left for me to do lol.

Will you be releasing compiled .exe's or .msi's for us to install it?
That'd be ideal if you could :)

xxxxxxxx

Does smart work? Because I downloaded the latest repositories but this still shows up on every script I use:

Failed when compiling
Line 4: [Error] (6:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\scarprerelease\includes\srl/srl/misc/smart.scar

I feel stupid by asking this but how do i get it from "RC" to "Alpha".

I tried Associate .scar files, Freddy, but it said that '' isn't a valid something (or something like that).

From: Nava2
http://pastebin.com/m681f383f

Just so you know :)

That was a major crash I got.

I'm afraid that won't tell me much, however, I've added error reporting to SCAR, so if you get another crash like that, you'll be prompted to send in an error report which will provide me the data I need to track down the bug.

From: samm
Already tried, I have no idea what it could be, there is simply nothing blocking/denying it access, I've disabled it all.
I've reinstalled SVN.
I just don't know what is left for me to do lol.

Will you be releasing compiled .exe's or .msi's for us to install it?
That'd be ideal if you could :)

xxxxxxxx

Hmm, the final version will be released as a setup.

From: staznpride
Does smart work? Because I downloaded the latest repositories but this still shows up on every script I use:

Failed when compiling
Line 4: [Error] (6:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\scarprerelease\includes\srl/srl/misc/smart.scar

I dunno, I do'ntr eally occupy myself with SMART…

From: WizOfTheOne
I feel stupid by asking this but how do i get it from "RC" to "Alpha".

RC is a later stage in the development releases than Alpha.

From: 99_ aka ian.
I tried Associate .scar files, Freddy, but it said that '' isn't a valid something (or something like that).

Run SCAR as administrator.

From: staznpride
Does smart work? Because I downloaded the latest repositories but this still shows up on every script I use:

Failed when compiling
Line 4: [Error] (6:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\scarprerelease\includes\srl/srl/misc/smart.scar

see if at the top of your script you have:

{.Include SRL\SRL.Scar}
{.Include SRL\SRL\Misc\Smart.Scar}

if smart is under srl, like above, then make it like this:

{.Include SRL\SRL\Misc\Smart.Scar}
{.Include SRL\SRL.Scar}

In the latest rev (28 i think?) sometimes when i press play my computer dies. Like i cant even move the mouse its completely dead. Like normally it says the script compiled then starts the script but none of that just a pure freeze.

Lost 1 hour of scripting due to it, quite frustrating. Yet again my fault i didn't save my work.

From: Baked0420
see if at the top of your script you have:

{.Include SRL\SRL.Scar}
{.Include SRL\SRL\Misc\Smart.Scar}

if smart is under srl, like above, then make it like this:

{.Include SRL\SRL\Misc\Smart.Scar}
{.Include SRL\SRL.Scar}

yeah, but i think i did some setup wrong, i first used turquoise svn to checkout scar alpha 3.21 and then i use it again to checkout srl-developers into the includes, then i try running scripts and they all show up with the same error:

Failed when compiling
Line 5: [Error] (7:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\scarprerelease\includes\srl/srl/misc/Smart.scar

can anyone please help?

From: staznpride
yeah, but i think i did some setup wrong, i first used turquoise svn to checkout scar alpha 3.21 and then i use it again to checkout srl-developers into the includes, then i try running scripts and they all show up with the same error:

Failed when compiling
Line 5: [Error] (7:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\scarprerelease\includes\srl/srl/misc/Smart.scar

can anyone please help?

You need to move your plugins. Go to your SRL folder and copy the stuff in "place inside plugins folder" into SCAR's Plugins folder.

The final release is coming up real soon now, so if you have any suggestions or bugs to report, this would be the time. Please do so at my forums though.

are you going to add the change client ass a procedure/function like someone suggested earlier? or did you already?

From: Baked0420
are you going to add the change client ass a procedure/function like someone suggested earlier? or did you already?

I already did that, it's named DisguiseClient, it doesn't actually change the title of the client, rather the title of the window that holds the client.

Question, when is this version going to go to beta, and finally release version, because personally I don't feel like testing a not finished product, yet want to continue macroing.

From: Feroc1ty
Question, when is this version going to go to beta, and finally release version, because personally I don't feel like testing a not finished product, yet want to continue macroing.

It's already on RC, and is only one release away from being finished.

From: Freddy1990
I already did that, it's named DisguiseClient, it doesn't actually change the title of the client, rather the title of the window that holds the client.

oh well thanks for the reply :) glad to know it's been done, and good job with the final release. I'm going to download it now.