SRL Archive - RS3 Outdated / Broken Scripts

If you download and use my script, please post progress reports, any errors/bugs or suggestions.

Start the script with your character in the Draynor bank(Next to any of the bank booths) with an axe wielded or in 1st slot of inventory. Your combat level MUST be 15 or higher to avoid getting killed by the dark magicians.


Drain willows contains:
Antiban
Antirandoms
Multiplayer
Auto-detects if wielding axe - Supports dragon axe!
Random but efficient walking!
Very good tree detection and cutting

Top Progress Report: Thanks to [B]Ogre[/B]

|--------|--------|--------|--------|
|Nick    | EXP   | Logs   | Levels|
|--------|--------|--------|--------|
|Luh    |823770| 12204 |   2   |
|--------|--------|--------|--------|
Ran for 20 Hours, 49 Minutes and 43 Seconds

Version 0.20 Alpha: Removed the broken bird nest finder. Tweaked a bit of the script, fixed a major woodcutting bug where it would keep moving the mouse if there was no trees. Removed deathwalk - no fighting randoms no need for a deathwalk. Added a new bank ddtm.

Version 0.21 Alpha: Added a new cutting failsafe. You can now customise the TPA size.

Previous Versions
Drain Willows V5.4.scar (13.3 KB, 81 views)
Drain Willows V6.scar (13.1 KB, 7 views)

Drain Willows V6.1.scar (13.7 KB, 30 views)
Drain Willows V6.1.2.scar (15.2 KB, 31 views)

Drain Willows V6.2.5.scar (16.5 KB, 59 views)
Drain Willows V6.3.scar (15.8 KB, 147 views)

Drain Willows V0.10 Alpha.scar (15.8 KB, 35 views)
Drain Willows V0.16 Alpha.scar (21.3 KB, 36 views)

Drain Willows V0.20 Alpha.scar (15.6 KB, 64 views)

I do not have a copy of this script anymore, if any of the people who used it still has a copy please send me the code in a PM and I will update this script to make it work on Simba.

In the meantime, please refer to this Draynor willow banker:http://villavu.com/forum/showthread.php?t=56574

http://villavu.com/forum/showthread.php?t=56574

gonna check it out later

Edit: mmm i found a bug when i start in draynor bank it sometimes finds the color of the log and chops down a tree near the draynor bank then walks forwards away from the willows to some random place and gets lost and still trys to find a colour

btw i have changed the tolerance to 70 still same problem

Will test now.

Okay, umm. There's a 50% chance it'll walk off to the northeast. Don't know why.
It has problems finding willows if the one it just clicked gets chopped down before it reaches it.
Problems returning ot bank.

Thanks for the feedback, i will work on it now and may release V4 today if its ready or just release an updated version of 3.

edit - Just released version 4. Walking is now fully completed with failsafes. In later versions i may add a Multiplayer and a better antiban.

edit 2- Shortly after the release of V4 my password was changed becuase I accidently left it in. Please don't steal

:/ sorry to hear that..

no reason to triple post tho ;)

just edit your posts :)

——————————-
Worked for 2 Hours, 24 Minutes and 4 Seconds
Gained 35910 Exp
Chopped 532 Willows
——————————-

It seems to work pretty well. Started out at level 35 and it went until an unsolved random. I'm not a big fan of the banking. I'm not sure if that's your script or not, but Draynor bank has a lot of the same colored wood in it and it makes me uneasy when I see it tracking that color.

Wow, 7 downloads… thanks for the feedback neosage

This is a nice script but why does it stop after about an hour or two of cutting? I have only managed to get about 2 hours in one session before it stops working. It stops working by itself, there are no randoms or anything. Still a very nice script overall, has gotten me 55-64 wcing so far.

What do you mean it stopps after 2 hours? it logs out?

Drain Willows V5 Alpha gave me this error

Line 175: [Error] (16478:23): Type mismatch in script C:\Users\Arcana\AppData\Local\Temp\Drain Willows V5 Alpha.scar

and it goes to this line

if (Nextplayer(True)) then

Ahh sorry Dark Arcana i didn't test it, ill fix and re upload shortly

From: cycrosism
Ahh sorry Dark Arcana i didn't test it, ill fix and re upload shortly

Okay, I made a Willow Chopper too, going to apply for membership with it :D

You should apply too :)

I don't think it is ready to apply yet, i still need to fix up the chopping procedure and other stuff. I'm working an a improved version of V5 Beta as i found some errors after posting it

This is my proggy:

——————————-
Worked for 38 Minutes and 20 Seconds
Gained 22680 Exp
Chopped 336 Willows
——————————-

I stopped it manually (this was with V5 beta)

OK V5 Beta is now stable, post proggies please

——————————-
Worked for 1 Hours, 5 Minutes and 1 Seconds
Gained 47250 Exp
Chopped 700 Willows
——————————-
Works well just seems to sometimes sit there and do nothing then logs out.
Also can you make it so that when logged out it stops running, it seems to make circles still trying to find willows

It banks my axe for some reason.
EDIT: Used acc that is capable of wielding the rune axe and this script is AWESOME!

Will post some proggies soon. Also it stopped first time after hour or so :S

EDIT2: Here is my proggy, got 100k exp with it :D :
——————————-
Worked for 2 Hours, 51 Minutes and 5 Seconds
Gained 105840 Exp
Chopped 1568 Willows
——————————-
Thats from lvl 55-61 with it.


EDIT3: Lol lots of edits xD

Sometimes it just stops. Maybe you can do something about it? Aside for that this is very good script :p

Thanks for the feedback, I added a new Reflection version (Which only uses animations) for better woodcutting results

I am currently testing the v5 Beta and its running smoothly.
i have to say this script is excellent at detecting changes for eg when the tr te chracter is on dissapears, or when the inventory is full. all in all i have to give it a 8 outta 10. the only down side u can see is the time it takes to find the bank, but thats not ur fault and maybe adding some way of picking up the birds nest. Heres a copy of the progress report:

——————————-
Worked for 1 Hours, 13 Minutes and 45 Seconds
Gained 58590 Exp
Chopped 868 Willows
——————————-
Successfully executed

Thank you for the feedback I will be improving this and hopefully releasing the full V5

edit - V5 released! You can now change Axe to True or False (True means its equiped and False means its not) So now it won't bank your axe if its set to false.

——————————-
Worked for 5 Hours, 38 Minutes and 0 Seconds
Gained 103882.5 Exp
Chopped 1539 Willows
——————————-

Just now stopped it manually. Working great so far, 16 levels since yesterday.

here ya go:

[PHP]——————————-
Worked for 1 Hours, 31 Minutes and 43 Seconds
Gained 47250 Exp
Chopped 700 Willows
Gained 1 Levels
——————————-
All players are inactive
Thank you for using Drain Willows!
Successfully executed
[/PHP]

Good script, testing as we speak, so far been good for 14 mins.

————————————
Worked for 23 Minutes and 57 Seconds
Gained 18900
Chopped 280 Willows
Gained 0 levels
————————————

Stopped it manually, think I'm gonna go for 99 with this, only 10m more exp to go!

From: Atin
——————————-
Worked for 5 Hours, 38 Minutes and 0 Seconds
Gained 103882.5 Exp
Chopped 1539 Willows
——————————-

Just now stopped it manually. Working great so far, 16 levels since yesterday.

wow that's gotta be the bigest proggy i've ever seen. V5.1 final tells you how much level's you've gained too

hmmm does this work with the new login screen? i'll run it again and see if it works i guess :\ ur DeathWalk procedure looks nice :D might ask to borrow it for a fisher i MIGHT be borrowing…

From: tomtuff
hmmm does this work with the new login screen? i'll run it again and see if it works i guess :\ ur DeathWalk procedure looks nice :D might ask to borrow it for a fisher i MIGHT be borrowing…

Well assuming you've updated the LoginPlayers function with your login.scar file in your folder then all your scripts should.

Look here to fix it if you haven't already

http://www.villavu.com/forum/showthread.php?t=43917

ohhh thanks a lot :D trying now, and helping a friend set up srl…

It should work with the new log in screen if you have updated your login.scar and you can run it and when it logs in, stop the script then "click here to continue" then run it again when its properly logged in and that should work. has anyone tested my deathwalk?

Awesome willow script. Thanks so much!

——————————-
Worked for 29 Minutes and 39 Seconds
Gained 22680 Exp
Chopped 336 Willows
Gained 0 Levels
——————————-

From: cycrosism
It should work with the new log in screen if you have updated your login.scar and you can run it and when it logs in, stop the script then "click here to continue" then run it again when its properly logged in and that should work. has anyone tested my deathwalk?

I try'd getting lost, it cast the spell but didn't do anything at Lumbridge :(

From: 70s_dollar
I try'd getting lost, it cast the spell but didn't do anything at Lumbridge :(

yeah same here.

hmm ill see what i can do. It will take around 5 second to activate so it might just sit in lumbridge for a few seconds before it walks. Did it say anything in the debug box?

From: cycrosism
hmm ill see what i can do. It will take around 5 second to activate so it might just sit in lumbridge for a few seconds before it walks. Did it say anything in the debug box?

Cant remember, I'll be extensively running this over the next couple of weeks, so I'll figure it out.

K, post what it says here when your done and ill see if I can fix it

From: cycrosism
K, post what it says here when your done and ill see if I can fix it

from what i remember, no it doesnt say anything.

From: Punkgi
from what i remember, no it doesnt say anything.

How long did you wait after you were in lumbridge?

this is where it fails:


this shoves it in your face by saying:

——————————-
Worked for 3 Minutes and 35 Seconds
Gained 0 Exp
Chopped 0 Willows
Gained 0 Levels
——————————-
All players are inactive
Thank you for using Drain Willows!
Successfully executed

Hmm so it walked the dirt road, ill see what i can do at that part.

edit - I uploaded a fixed version, please test my deathwalk and tell me if it works for you (i tested it multiple times myself and it worked but i need to know if it works for you guys)

From: cycrosism
Hmm so it walked the dirt road, ill see what i can do at that part.

edit - I uploaded a fixed version, please test my deathwalk and tell me if it works for you (i tested it multiple times myself and it worked but i need to know if it works for you guys)

testing… thanks for the PM.

I hope that the picture helps, i know its better than words.

here is what happens when i died from the mages. when i die it clicks a few blacks in front of me and then heads on around back of the castle




a different walk to trees (but i took this from a fishing script) i have found this is by far the best way to get there and wont die.) please look into this, you wont be dissapointed.

I took this from Drafish is you needed to know. What this does is use the rock instead of going through mages and get hit while it clicks next to the other tree

Procedure ToFishies;
var
x, y, i: Integer;
One: Boolean;
begin
if not loggedin then exit;
//{$IFDEF SMART }
//If FindRockColor2 = 0 then
//If not FindRS then
//FindWindow('Embedded SMARTv4.2 - Scar Minimizing Autoing Resource Thing - By BenLand100');
//{$ENDIF }
for i := 0 to 22 do
if GSW(RockColor, 0, 195, 165, 38+i, 15, 0)then
begin
One := true;
Write('Found it at ' +inttostr(i));
break;
end;
If not One then
begin
Write('Using blind click!');
mousebox(627, 120, 640, 138, 1);
Flagg;
end;
Flag;
If FindSymbol(x, y, 'Fishing spot')then
begin
mouse(x, y, 3, 4, true);
Flagg;
end else
begin
Write('Couldnt find fishing symbol!');
if not RadialWalk(FindWaterColor, 200, 190, 20, 2, 2) then
begin
Write('Error! Couldnt walk to fishing spot!');
killPlayer;
exit;
end;
end;
wait(300+random(100));
end;



Procedure ToBank;
var
x, y, i: Integer;
Two: Boolean;
begin
if not loggedin then exit;
//{$IFDEF SMART }
//If findrockColor2 = 0 then
//if not FindRS then
//FindWindow('Embedded SMARTv4.2 - Scar Minimizing Autoing Resource Thing - By BenLand100');
//{$ENDIF }
For i := 0 to 20 do
if GSW(RockCOlor, 0, 10, 80, 25 + i, 10, 0)then
begin
Two := True;
Write('Found it at '+ Inttostr(i));
break;
end;
if not two then
begin
Write('Using Blind click!');
mouse(662, 63, 4, 4, true);
flagg;
wait(200+random(200));
end;
Flagg;
If DTMRotated(BNk, x, y, mmx1, mmy1, 702, 78+10)then
begin
mouse(x + 9, y, 2, 2, true);
write('Used DTM');
Flagg;
Flagg;
end else
begin
if FindSymbol(x, y, 'bank') then
begin
mouse(x, y, 2, 2, true);
Write('Used Symbol');
Flagg;
end else
begin
If FindColor(x, y, DraynorBankFloorColor, mmx1, mmy1, 702, 78)then
begin
mouse(x, y, 3, 3,true);
write('Had to use floor color!');
Flagg;
end else
begin
write('Couldnt walk into bank!');
killplayer;
exit;
end;
end;
end;
end;

So you saying i should make it go to the back of the castle and open those 2 doors? What's wrong with my deathwalk now?

P.S if you don't want the mages to attack you get your combat level to 15 or higher

mmm i found a bug

it sometimes goes banking with full inv then right clicks a banker then moves it away then goes back to the trees without even banking the willows

Well i don't think i can fix that as i did not make OpenBanKQuiet but after it walks to the willows it will go back to the bank and deposit them

——————————-
Worked for 52 Minutes and 40 Seconds
Gained 37800 Exp
Chopped 560 Willows
Gained 1 Levels
——————————-

works great for me

From: cycrosism
So you saying i should make it go to the back of the castle and open those 2 doors? What's wrong with my deathwalk now?

well your lost walk is fine, its the death walk that actually needs some work. i went to make a video but it getts super laggy.


i didnt put it there, it walks there itself and just sits there.

Testing deathwalk as we speak, before you updated it, it would automatically assume we were lost and try and commence deathwalk.

It casted it, starting to walk out of castle, on the dirt road now, going by the HAM hut, going by the jailer, on the concrete path, heading towards Draynor, we are in the bank, it's looking for something? I had it walk to willows myself, deathwalk works, but when it gets to the bank something happens, not sure what.

Edit - Also, it sometimes leaves the player with a full load of willows before switching players, only real bug for me besides deathwalk one.

Edit - Have a proggy too

-------------------------------
Worked for 1 Hours, 19 Minutes and 9 Seconds
Gained 79380 Exp
Chopped 1176 Willows
Gained 0 Levels
-------------------------------
No players are logged in
Successfully executed

Opps, I forgot to call a procedure after it reaches the bank so its going to look for the willows at the bank. I'll fix it now

v5.2 released

Line 330: [Error] (16817:1): Unknown identifier 'WalkToWillow' in script

I fixed it simply and quickly but it may not be as accurate

Procedure DeathWalk;
Var
  x,y, wx, wy:integer; //wx and wy are a general position of the willows
begin
 wx :=604
 wy :=116
  Cleardebug;
  Writeln('We are lost');
   If(TabExists(7)) then
    begin
      Writeln('Death walk activated');
      GameTab(7);
      wait(700+random(700));
    end else AntiRandom;
  Mouse(571,228,10,10,true);
  wait(500);
  wait(17000+Random(5000));
  Writeln('Walking Back');
  SetAngle(True);
  Setrun(true);
  RadialRoadWalk(FindLumbyRoadColor,30,80,65,1,1);
  RadialRoadWalk(FindLumbyRoadColor,340,0,30,1,1);
  RadialRoadWalk(FindLumbyRoadColor,270,345,60,1,1);
  RadialRoadWalk(FindLumbyRoadColor,240,330,40,1,1);
  RadialRoadWalk(FindLumbyRoadColor,240,330,40,1,1);
  RadialWalk(FindDirtRoadColor,200,300,60,1,1);
  RadialWalk(FindDirtRoadColor,200,300,60,1,1);
  RadialWalk(FindDirtRoadColor,200,300,60,1,1);
  RadialWalk(FindDirtRoadColor,200,300,60,1,1);
  RadialWalk(FindDirtRoadColor,180,300,60,1,1);
  RadialWalk(FindDirtRoadColor,180,300,60,1,1);
  RadialWalk(FindDirtRoadColor,180,300,60,1,1);
  RadialRoadWalk(FindRoadColor,270,360,60,1,1);
  RadialRoadWalk(FindRoadColor,270,360,60,1,1);
  Cleardebug;
 SymbolAccuracy := 0.4;
   If(FindSymbol(x, y, 'bank')) then
    Begin
      Writeln('We returned to the Draynor bank');
      Mouse(x, y, 4, 4, True);
      FFlag(10);
      Mouse(wx, wy, 5, 5, True); //Clicks the willows
      Gametab(4);
    end else
    begin
      Writeln('Could not find the bank symbol');
      wait(500+random(500));
      Writeln('We are lost');
      Players[CurrentPlayer].Active := False;
      Logout;
      Exit;
   end;
end;

K fixed, I will re upload v5.2 again (fixed of course) Thanks for the feedback

edit - Ok i re uploaded v5.2 with some fixes. Everything should work if it doesn't post the error here and I will try to fix it

Line 14: [Error] (16804:1): Semicolon (';') expected in script C:\DOCUME~1

From: cycrosism
K fixed, I will re upload v5.2 again (fixed of course) Thanks for the feedback

edit - Ok i re uploaded v5.2 with some fixes. Everything should work if it doesn't post the error here and I will try to fix it

Hey man I will test death walk and lost walk just for you and post pics.

From: Sinking Poop
Line 14: [Error] (16804:1): Semicolon (';') expected in script C:\DOCUME~1

Let me guess, you changed the number after "switch" but forgot to put the ; after it?

Here is the lost walk for you, yes it gets lost and logs out.


i have logs because i switched from another autoer i have


EDIT, i did it again and made it di the lost tavel, and it works. now waiting on death

I just logged in and did the deathwalk myself and it walked to the bank perfectly so I am not sure how you are getting the error. But I will try to fix it for you

From: cycrosism
I just logged in and did the deathwalk myself and it walked to the bank perfectly so I am not sure how you are getting the error. But I will try to fix it for you

yes i edited and said i did it again and it worked.

it doesnt even attempt a death walk?

I still get unknown identifier because of the WalkToWillow

Also when I do deathwalk I get

[Runtime Error] : Exception: Can't allocate the DIB handle in line 317 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/AutoColor.scar

Punkgi, I did not make it call a deathwalk while it is cutting willows, please get level 15 or higher so the mages do not attack you.

70s_dollar, which version of scar are you using

From: cycrosism
Punkgi, I did not make it call a deathwalk while it is cutting willows, please get level 15 or higher so the mages do not attack you.

is there anyway to make it so the death acts like its lost? like what would i make different

Ok Punkgi, download v5.2 edited and it should detect if your dead and do the deathwalk

From: cycrosism
Punkgi, I did not make it call a deathwalk while it is cutting willows, please get level 15 or higher so the mages do not attack you.

70s_dollar, which version of scar are you using

Latest everything, I switched some things around it's working, but I don't know why it didn't before.

From: cycrosism
Ok Punkgi, download v5.2 edited and it should detect if your dead and do the deathwalk

hah thanks.

v5.3.1 released, fixed a few small bugs

Wow, this just got a lot better because the deathwalk worked all the way, try cleaning it up, making sure you're standards are correct and you may be able to get members with this.

Edit : I also made a quick Edgeville Yewcutter with this, hope you don't mind, it'll be for personal use only.

From: 70s_dollar

Edit : I also made a quick Edgeville Yewcutter with this, hope you don't mind, it'll be for personal use only.

Ultra Cut N Back works well already.
Of course, it doesnt do the "Click here to Continue" but you can do that manually. Unless there is a smart fix I missed?

Yes update login.scar it should work

From: Luski14
Ultra Cut N Back works well already.
Of course, it doesnt do the "Click here to Continue" but you can do that manually. Unless there is a smart fix I missed?

You need to update your Login.scar I had the same problem. http://www.villavu.com/forum/showthread.php?t=43623

———————————————————————

Drain Willows.. One of the best out there! Thanks man.

~Kryptic

Sweet, thanks I've worked really hard on this script, also i released v5.3.2 which has a better fail safe before i does the deathwalk. If it sees the message that you get when you cant cast home teleport, it logs out for 5 mins then tries it again (and repeats until you cast it)

yeah for the loging thing i tried that fix and it didnt work , when it logs in it just sits there and doesnt click "click here to play"

The login fix can be found: http://www.villavu.com/forum/showthread.php?t=43623

Worked for 3 Hours, 15 Minutes and 44 Seconds
Gained 245700 Exp
Chopped 3640 Willows
Gained 2 Levels
—————- this is without breaks - started logged in
ill take a look at ur link now

Somethings still wrong for me

[Runtime Error] : Exception: Can't allocate the DIB handle in line 317 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/AutoColor.scar

Was getting this early? Anybody know what it is I need to do?

V5.4 released. Includes a DDTM and some small bug fixes

hEy man i been using this script working very well, i was wondering if about picking up bird nests

edit: nevermind htat i jus download the new vesion gonna try it now :)

i tried it it didnt pick up a nest with ring in it usually i dont pick them up but yah just letting you know :p

Learn TPointArray's.

Revision #32 has been released, please download it to get the randoms working

http://www.villavu.com/forum/showthread.php?p=551724#post551724

From: cycrosism
Revision #32 has been released, please download it to get the randoms working

http://www.villavu.com/forum/showthread.php?p=551724#post551724

what!?!?! they have anti random now!!!?? omg

——————————-
Worked for 3 Hours, 40 Minutes and 7 Seconds
Gained 158760 Exp
Chopped 2352 Willows
Gained 3 Levels
——————————-

Doesn't bank stuff from randoms. Extremely good script!!

Yeah, it can't bank things from random events it says "A magical force prevents this item from being deposited" or something

cycrosism if you don't know how to open the reward box read this thread.

Worked for 1 Hours, 37 Minutes and 44 Seconds
Gained 120960 Exp
Chopped 1792 Willows
Gained 0 Levels

Worked for 40 Minutes and 1 Seconds
Gained 32130 Exp
Chopped 476 Willows
Gained 0 Levels

Worked for 2 Hours, 3 Minutes and 49 Seconds
Gained 128520 Exp
Chopped 1904 Willows
Gained 0 Levels

Worked for 23 Minutes and 27 Seconds
Gained 20790 Exp
Chopped 308 Willows
Gained 0 Levels

Worked for 30 Minutes and 11 Seconds
Gained 32130 Exp
Chopped 476 Willows
Gained 0 Levels

Worked for 1 Hours, 5 Minutes and 24 Seconds
Gained 60480 Exp
Chopped 896 Willows
Gained 1 Levels

Need to add my longest report that just got ready:

——————————-
Worked for 10 Hours, 30 Minutes and 46 Seconds
Gained 540135 Exp
Chopped 8002 Willows
Gained 4 Levels
——————————-

WC 66-70.. mmm… :p

EDIT: SOmething is not right.. I should have gotten more levels if it would have cut all the logs the proggy says. It may be because that random event box was in my invi the whole time. And also I just checked.. I have like ~8k logs in my bank at the moment, but i had like ~3k before starting it in bank. So something isn't right with the calculations.

well i just downloaded so ill give you a proggy soon. =] so far it's going good

Worked for 15 Hours, 23 Minutes and 6 Seconds
Gained 665280 Exp
Chopped 9856 Willows
Gained 5 Levels

it actually got me from 63-73 so gained 10 levels not 5


and the error that stoped it was
[Runtime Error] : Exception: Canvas does not allow drawing in line 126 in script D:\SCAR 3.15\includes\SRL/SRL/Core/AntiRandoms/Sandwich.scar

thx. got me to lvl 60 in 3 days :D

From: L3nnuk
Need to add my longest report that just got ready:



WC 66-70.. mmm… :p

EDIT: SOmething is not right.. I should have gotten more levels if it would have cut all the logs the proggy says. It may be because that random event box was in my invi the whole time. And also I just checked.. I have like ~8k logs in my bank at the moment, but i had like ~3k before starting it in bank. So something isn't right with the calculations.

wow, half a million EXP that is very nice. I'll see what I can do about those mis calculations

From: cycrosism
wow, half a million EXP that is very nice. I'll see what I can do about those mis calculations

After doing some calculating of my own, looks like I only like 250k-300k exp.. Maybe it was because of that random event box I got?

Hopefully ill get another 10 hour run done tonight. Ill just hope I wont get any randoms :p

Worked for 5 Hours, 8 Minutes and 43 Seconds
Gained 224910 Exp
Chopped 3332 Willows
Gained 1 Levels

Worked for 44 Minutes and 54 Seconds
Gained 56700 Exp
Chopped 840 Willows
Gained 0 Levels

Worked for 3 Hours, 28 Minutes and 42 Seconds
Gained 173880 Exp
Chopped 2576 Willows
Gained 0 Levels

Nice progress report hutic. Also with that error I think you should show the developers as it happened with Sandwich.scar

it works pretty well but sometimes it just searches around looking to where 2 click and doesnt click, for example its in bank it will search around but wont click the minimap..

Hmm that could be caused by the DDTM. Does it say anthing in the debug box like "Could not find rock/water color"

It also sometimes doesn't bank. Just runs from willows to bank and back with full load.

Thanks, I might update this and make a fail safe for it

This script works well, but sometimes wen it goes to bank it banks the logs and doesn't go back to willows.

- Also when it finishes and inventory sometimes it doenst find bank so it tries teleporting to lumby but is always unable to find its way back.

the only problem i have with it that i see, is it lags alot when it tries to bank and sometimes if cant bank so it runs back down to cut. but already has a full load.

but other then that from what ive seen it works good

Worked for 16 Minutes and 37 Seconds
Gained 20790 Exp
Chopped 308 Willows
Gained 0 Levels

stopped manually lagged and couldnt bank

$ir dyno, open up the script, look for:

OpenBankQuiet('db');

and change it into this:

OpenBankFast('db');

@cycrosism: When the bank is crowded it won't find the bank, so add something like this:

 if FindColorTolerance(x, y, 10089719, MMX1, MMY1, MMX2, MMY2, 40) then
    begin
      Mouse(x, y, 4, 4, true);
      FFlag(7);
      Writeln('We are in Draynor Bank');
    end;

Edit:

Here is a little progress report:

——————————-
Worked for 1 Hours, 1 Minutes, and 19 Seconds
Gained 30464 Exp
Chopped 448 Willows
Gained 0 Levels
——————————-

I fixed the problem of it not finding the bank by editing the symbol accuracy a long time ago

on thursday this script worked really good, got me the whole lvl 81-82, now for some reason i get 1 load, banks but wont run back. might be only mine, got any ideas?

I just tested it.

You need to fix the chopping procedures i reakon they are very botty (clicking trees all the time until your not moving) and also walking to the bank, symbol clicking = ban. Especially constantly.

Other then that small great script. (Running wise)

——————————-
Worked for 39 Minutes and 5 Seconds
Gained 21870 Exp
Chopped 324 Willows
Gained 0 Levels
——————————-

quick proggie, got better ones but didn't copy them -.-

Edit: It would help a lot more if you added nest finding! :p

Version 6 released please test

Released V6.1! Has better walking and cutting procedures and fixed the problem with the auto detect axe

Mmm, looks great! I might try once I get 30 woodcutting..

Here is my little progress report

——————————-
Worked for 1 Hours, 3 Minutes and 15 Seconds
Gained 47600 Exp
Chopped 700 Willows
——————————-

Nice, did you have any problems with it? or any suggestions?

Edit - Just to let people know it does not click the bank symbol anymore, but the floor of the bank itself. It will only click the bank symbol if the first method fails

why is it that it never can complete a random event?

It is not the script, it's SRL. Also, what version of SCAR are you using.

Yes hutic, Da 0wner is correct there are some random events which aren't yet solvable

V6.1.2 released, Has my own custom FindDirtRoadColorEx in it, which means the deathwalk should now work. Also made the auto detect axe a bit better

I am sorry for the triple post, but can people PLEASE stop leeching my script… it has 36 downloads and no feedback. I will have to remove my script if people continue to leech it!

Once drain willows 6.1.2 reaches 10 downloads, I will check for feedback and if there is none i will have to delete it until people give me feedback

edit - I see it has reached 10 downloads. Tomorrow after school I will check this thread and if there is no progress reports, errors or suggestions posted here for me I might take down the script for a while as I do not want people leeching it

Well I can't really give too much feedback cause in order to check my macro comp i have to unhook my monitor and plug it into my macroing comp… I can tell u the script has been running fine for about 6 hours…

From: cycrosism
I am sorry for the triple post, but can people PLEASE stop leeching my script… it has 36 downloads and no feedback. I will have to remove my script if people continue to leech it!

Once drain willows 6.1.2 reaches 10 downloads, I will check for feedback and if there is none i will have to delete it until people give me feedback

edit - I see it has reached 10 downloads. Tomorrow after school I will check this thread and if there is no progress reports, errors or suggestions posted here for me I might take down the script for a while as I do not want people leeching it

You cant do anything about the leeching. So just live with it.

From: Jethr0x
Well I can't really give too much feedback cause in order to check my macro comp i have to unhook my monitor and plug it into my macroing comp… I can tell u the script has been running fine for about 6 hours…

Cant u just remote desktop into it

Also, I have not decided to remove my script. But it would be much appreciated if people would give feedback and post progress reports

ok this has been happening only since your newest release it has never happend previously, at randoms points while running the script it banks the willow logs then just sitts there.. doing nothing at all it's been happening on all of my accounts.

good script tho :D,
Accounts:
63-91
30-77
59-87

would be a pitty if you removed ;(

Hmm I have fixed that problem because I set the randomness to high so therefor it clicks just outside the minimap and the script waits there. In my next version which I might release tomorrow the problem is fixed but I am currently adding new procedures to it so it's either tomorrow or in 2 days

ok i'll be waiting untill you do that =)

ok i'll be waiting until people post proggies and give feedback

When you fix it people will post progress reports :D.

It is fixed, just not uploaded but as i was saying if people would post them it would be nice

i always post, :) if they are decent, but because of the recent issues it doesn't run longer then 2-3 hours

6.2.5 released! Has a custom bird nest finder I added in! Also it has been set to auto on members by default from now on so change members to false if your not a member

6.2.5 is not rational nor a real number lol. 6.25 is good though.

ok ill post a proggy of 6.2.5 soon^^

So what do people think of my script

——————————-
Worked for 1 Hours, 6 Minutes and 1 Seconds
Gained 32805 Exp
Chopped 486 Willows
——————————-

I ended up in lumby with a full bad a willows.

Do you know why?

Did you die or something?

From: cycrosism
Do you know why?

Did you die or something?

nope i have watched and it would randomly think i died.

Good job mate
thanks :)

——————————-
Worked for 1 Hours, 6 Minutes and 42 Seconds
Gained 32805 Exp
Chopped 486 Willows
——————————-
WaterColor = 10390398
WaterColor = 10390398
Rock Color = 5853533
Rock Color = 5853533
Couldn't find the bank. Exiting

was in the bank.

Hmm Becks, It would of walked back to the willows then walked to the bank and desposited

Some times it does death walk makes it to the bank then logs

Very good i had a proggy, But sorry i got pisted off it fucked up while i had my computer running for over 8 hours but it only cut 999 willows,



So i clicked scar away, Then i was like ''FFS i needed to post it.''
I'm sorry, Anyway how to make it chop more than 999 willows ?


if try'd this:

Players[0].Integers[1]  := 56456456+random(76575676); //Switch players/relog after how many loads?

Whats wrong here, Which line do?.


Or you could just make a simple option,

How many loads to do: 99999994565,

Then it does that kind of loads.
Will post bigger proggy later.

Do you know why it stopped? It could of screwed up due to an unsolvable random or if it got lost, If you make that integer 10000000 or something high it wont switch it for a long time

Tested it, and works good.

——————————-
Worked for 9 Hours, 1 Minutes and 39 Seconds
Gained 236250 Exp
Chopped 3500 Willows
——————————- :D

Thanks for the feedback, is there anything you want to see added/improved?

do u think i can level from wc 1-70 with this script in 3 days?

No because you can't chop willows with 1-29 woodcutting.
Also, that is highly detectable. You shouldn't do that :p.
That's called script abusing.

From: naryasha
do u think i can level from wc 1-70 with this script in 3 days?

It is possible, but not wise just as Da Owner explained. You can use some powercutter to do 1-30 and then rest with this script and make it in 3 days. But you will get banned. :rolleyes:

most people shouldn't be botting as level 3(I start every bot acc off with forefeathers and get some CB first)… I think if it killed the dark wizard guy every, say, 20 mins, it would almost be undetectable…

This is a woodcutting script not a combat script so no it wont kill the dark mage

doesn't mean it shouldn't be able to >_>

Well there is not really any point…just get a combat level of 10 or whatever.

You need combat level of 15+ for the dark mages to not attack you

Drain Willows Version 6.3 Released!!

Improved cutting procedure with my own custom TPA and now counts how many levels you have gotten.

Post progress reports and errors please

From: Cazabacca
It is possible, but not wise just as Da Owner explained. You can use some powercutter to do 1-30 and then rest with this script and make it in 3 days. But you will get banned. :rolleyes:

- I got 30-70 in 3 days without ban..

How recently? They don't ban you until like a week after.

From: Da 0wner
How recently? They don't ban you until like a week after.

like 2 months ago…

Well you were lucky then :).

Hey Cycrosism i been running this for like 15 mins, i saw this wrong:

- It goes on to another tree b4 it even finishes chopping another tree, it does this often so it doesn't cut any logs from trees. This makes it take long to get full invent….
- Sometimes it waits for another tree to finish chopping(even though its not chopping that tree) to go on to the next..
- It takes a while to find banker =\

- and sorry 4 being so.. anoying?, just trying to help ya have a good script :D

EDIT: Lost proggy sorry :S

1. There is no other good way apart from using animations (reflection)
2. Same as number 1
3. Thats not my script thats Bank.scar (OpenBank)

So in conclusion, the script will work MUCH better if I added reflection, but if I apply with reflection then the chances of me getting members will be much less

There is a way to do that with color :D.

The next version has a very good multiplayer progress report. I will be posting it when people post progress reports

That I helped him with :D.

Not really, I just asked you if you could help me with Padr, but I found out on my own what I did wrong before u actualy replied lol

Well, I showed you my progress report and you said that you learned by that ;).

From: willie2oo8
- I got 30-70 in 3 days without ban..

So did I. Guess what? I won't be playing that char anymore.

EDIT. Well I actually never played it MYSELF. (lol)

Could peple post progress reports? Thanks

For me, after one player goes inactive, it says I'm out of players.

did you set HowManyPlayers?

T~M

And the other players will be in the tags

{Like this so it wont be actually part of the code}

So take it out of the {} and yes, set howmanyplayers

-------------------------------
Worked for 6 Hours, 20 Minutes and 27 Seconds
Gained 39690 Exp
Chopped 588 Willows
Gained 2 levels
-------------------------------

:O 588 willows in 6 and half hours
stuck in random?

T~M

From: cycrosism
And the other players will be in the tags

{Like this so it wont be actually part of the code}

So take it out of the {} and yes, set howmanyplayers

HA! I can't believe I didn't realize that. xD

it works with upgrade on rs?

From: slakan
it works with upgrade on rs?

Yes. It works fine.

Edit:

-------------------------------
Worked for 5 Hours, 19 Minutes and 4 Seconds
Gained 29565 Exp
Chopped 438 Willows
Gained 2 levels
-------------------------------

i have bin running this script for a long time now (lvl 96 wc) but yesterday it was having a problem the death walk is kinda messed up

what is happening is the thing teles u home but then it ether gets to the training thing in lumby to the dirt roads and like stops or it ends up at the cows north of lumby so umm if something can be done great.

and i am useing SCAR 3.20d and most current srl #34 v4 i think but idk ok thanks

From: y0m0mma0123
i have bin running this script for a long time now (lvl 96 wc) but yesterday it was having a problem the death walk is kinda messed up

what is happening is the thing teles u home but then it ether gets to the training thing in lumby to the dirt roads and like stops or it ends up at the cows north of lumby so umm if something can be done great.

and i am useing SCAR 3.20d and most current srl #34 v4 i think but idk ok thanks

I have the same exact problem, it will think it is "Lost", tp to lumby, and then walk to the cows and walk back and forth for hours.
Also, bank DDTMs are messed up now… can't find the booths.

Have you got the DevSVN?
If not it will be to do with the new flags.

T~M

whats DevSVN?

——————————-
Worked for 2 Hours, 5 Minutes and 4 Seconds
Gained 40095 Exp
Chopped 594 Willows
Gained -10 levels
——————————-

From: y0m0mma0123
whats DevSVN?

The Open Dev SVN.

http://villavu.com/repositories/srl-opendev/

Victim14, If you get a negative level it must mean you were stuck in a random event and it could not open gametab(2)

I love this but the deathwalk is terrible :(

In fact, I didn't even die with it. It just decided to walk into the Draynor market and tele to lumby :S

I came back and he was walking in lumby cow paddock.


:norris:

Yes bro look up a post or two that is a problem that alot of us are having

The deathwalk will not work properly because of the FindDirtRoadColorEx, but if you have revision 33 and people post progress reports I will post the script.

i will try to post proggys but it only works for like 30mins befor something happens to mess every thing up ether walking to far past the bank and getting lost or the deathwalk so but i will run it later and post one.

ok another problem i have noticed is it will run up in to the city and gets lost up there like it gose to the east side of the bank and then i thinks i cant find the depost spot and then clicks some where in the city and then starts trying to find the bank tellers again so idont know whats up but that is something i have noticed.

Ok, I am at school I'll fix it when I get home

ok thanks

Will test now =J

I just used.
——————————-
Worked for 20 Minutes and 9 Seconds
Gained 9450 Exp
Chopped 140 Willows
Gained 1 levels
——————————-

The walk to bank is sometimes off as Runescape symbols now move much more. It gets back on track, but it looks rather suspicious.

Umm, I made it so it doesn't click the bank symbol, it clicks the floor of the bank now

and just a sugestion when you enter the bank make the screen turn to the left (west) and not the the right (east) it will help cas it thinks the little things on the east side wall is the bankers. and with the above post did you fix the running in to draynors city part.

Have you updated your flagchat.scar?

Here is the link: http://www.villavu.com/forum/showthread.php?t=45818

Hmm see if that works

hey i am so srry but i have gone to the link and i have looked around but i have no idea
what i am doing so i have also gone to a link on that forum this one

http://www.villavu.com/repositories/srl-opendev/

but i dont know what to do i am confused so if u could help me with this it would be such a help just give me a lil walk through on what to do. thanks

plz anyone if u could help cas like none of my scripts work and it would be such a big help

I will release V6.35 later. I have exams irl and scar/srl is not my top priority. So after the exams I'll fix it up and post it.

ok thanks

good luck on your exams

——————————-
Worked for 2 Hours, 44 Minutes and 24 Seconds
Gained 28350 Exp
Chopped 420 Willows
Gained -81 levels
——————————-
All players are inactive
Thank you for using Drain Willows!
Successfully executed

Didn't work well at all for me. Started in bank, goes oer to willows, and every 2 seconds it would click another willow before it was finished with one. Also after it has full inv, it takes like 2 mins for it to know it has to bank, and once its in the bank, the red dot flys everywere for a minute then finally banks and repeats. HELP???

Because It checks the uptext and when its not illo it moves to another willow.

The bank is not my problem its SRL's problem with the OpenBank

edit: 6 days until exams are over


edit2: In drain willows V6.35 I have included a form, and a screenshot debug (which is set to false by default). If you make this True, it will take screenshots when ever the script hits a point where it needs to set the player to false. I have 2 more Exams on Monday then I will continue to work on it and post it.

I have renamed it to V0.10 Alpha, and will call it version 1 when it is very stable and works good

Exams are over! I will work on my script a bit more before I post it.

Dammit this got me banned :( Was only autoing for 1hr at the time i was banned.

Used it good for about a week this is my best proggy. . .

——————————-
Worked for 3 Hours, 30 Minutes and 43 Seconds
Gained 90720 Exp
Chopped 1344 Willows
Gained 1 levels
——————————-

Death Walk does not work, it doesn't click on Home tele for me at least.

Version 0.10 Alpha released!

Many procedures have been rewritten and the deathwalk should work very good now. Chops the willows better then before.

edit - I removed the form, just wasted space and really didn't need it.

From: Bro
Dammit this got me banned :( Was only autoing for 1hr at the time i was banned.

it takes days for jagex to ban you after you've been detected. this script is da bomb and has good anti ban so the only way you are going to get banned is if you abuse it or are using on an obvious macro account.

From: alexrocket2
it takes days for jagex to ban you after you've been detected. this script is da bomb and has good anti ban so the only way you are going to get banned is if you abuse it or are using on an obvious macro account.

Hmm Yes my Anti-ban is quite good but I could improve it, thanks for the suggestion :)

hey i can get the new version to work, i get this error:

[Runtime Error] : Exception: Access violation at address 697C14D3 in module 'Embedded_SMART.dll'. Read of address 000008D4 in line 48 in script C:\Program Files (x86)\SCAR 3.20\includes\SRL/SRL/Misc/Smart.scar

version 6.3 was great tho!

Have you moved your plugins? Update SRL to the opendev one that should work

ok ill check and make sure, have you tested yet?

Yes I ran it fine for a few hours before I posted it

————————————
Worked for 5 Hours 11 Minutes 19 Seconds
Gained 132300
Chopped 1960 Willows
Gained 6 levels
————————————

Nice Script.

Thanks :) - Any suggestions?

Version 0.11 released!

Post progress reports/suggestions/bugs

Ok i get this very frequently - look where the flag is (its inside the bank). It have to go to the willows but doesn't move because the flag is in the bank not under it so it stays in the bank searches for willows and then log out because cant find willow tree.

>> BUG PICTURE <<

Hmm that may be because I made it click the DDTM to far. I fixed it just then, please download v0.15 and tell me if it works

I think i figured out why the amount of logs it says you chopped is more than you actually chopped. I watched it run through a few times and noticed every now and then it can't find the bank booth so it just runs back to the willows and trys to cut again, then it sees the inventory is full and runs back and banks, but it adds the failed attempt to the total making.

I love the script, works great other than the occasional minor bug. Ill post some proggies in a bit.

OK i will test it right now and post proggie

P.S. I'm famous :D thanks

News and updates:
- Fixed the WalkToWillow procedure. Thanks sapetto

EDIT
[PHP]|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|xxxx | 60142 | 891 | 2 |
|——–|——–|——–|——–|
Ran for 3 Hours, 6 Minutes and 42 Seconds
Saved 0 screenshots[/PHP]

The walking now is great! Oh… and it solved a drill demon ;)

Awesome! If you have any suggestions just post them here :)

I get 2 problems with it. The first one was;

It worked fine, logged on moved my char from bank to willows then it stopped and the mouse went to hover over tree to tree (as shown in pic)



It happened 4/4 times, when I went to try it a 5th (just to make sure and to test it longer) I was given this:

Socket Error # 10054
Connection reset by peer.
Version is outdated! Please visit http://www.villavu.com/forum/showthread.php?p=545744
Successfully executed

I tried deleting the script and re-downloading it but to no avail.

It's probably something i'm doing wrong but I just thought I should post it :redface:

EDIT:
Removed CheckVersion procedure from PreSetUp to get rid of bug 2 but the hovering mouse bug still happens
~Random

This script doesn't work, because the RuneScape has updated.

Yeah because it wants to find the uptext of 'illo' and it can't because the font has been changed

Okay it should work now the fonts are updated

From: cycrosism
Okay it should work now the fonts are updated

I don't think all the fonts are fixed. (You double posted)

One thing you can do is merge your post and still bump it.

1. Copy the text of original.
2. Delete it.
3. Make new one with the text of original + what you wanted to say.

Well, the UpChars are fixed (Thanks Zeph) So it should work

From: cycrosism
Well, the UpChars are fixed (Thanks Zeph) So it should work

Didn't N1ke! fix it?

I heard freddy fixed it or zeph did…

Well i better work on this script it's outdated now

From: cycrosism
I heard freddy fixed it or zeph did…

AFAIK the text isn't completely fixed. My scripts aren't working either (it just jumps from color to color, without clicking, like yours does). I use rs_GetUpText which is incorporated into SCAR, so I think Freddy has to fix that.

Don't take my word for it, I could be wrong, this is just how I know it. :)

SRL uptext finder is based on SCAR's rs_GetUpText, so it makes no difference :) It uses internal fonts so even if they are updated in the chars folder it would still not work.

If you have scar 3.21 with the updated fonts the script should now be working!!

Line 141: [Error] (17195:9): Unknown identifier 'tab_Stats'

Update your SRL.

Yeah, update your srl using the opendev

Post proggies and suggestions please :)

|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|bun | 9450 | 140 | 1 |
|——–|——–|——–|——–|
Ran for 38 Minutes and 46 Seconds


stopped by user :)

|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|bunn | 20790 | 308 | 2 |
|——–|——–|——–|——–|
Ran for 1 Hours, 51 Minutes and 50 Seconds

That is pretty good, any suggestions or anything?

ill post quite a long proggie for u now jus setting it up den ill give u a gud one:)

wen i am chopping a tree, it gets interupted half way through and clicks on another tree so it isnt getting the highet amount of logs possible

also, the death walk dosent seem to be working properly ?

awesome script but could you please add auto responce? thanks very much.

From: alexrocket2
awesome script but could you please add auto responce? thanks very much.

It's up to cycro, but in my opinion some auto responders can be a give away that you're a bot. Let me explain why:

If someone asks a certain question and you respond with close to the same thing everytime, it tells them you are a bot. For example, if I ask what everyone's woodcutting level is and you say "Mine's 77" and then I ask again and you say "I'm 77" and I ask again, and again, and again. See what I'm getting at?

A real person isn't going to keep replying like that. Also if you reply to something people may start a conversation and when you reply with something that makes no sense or just don't reply at all, you may get reported.

Again, it's up to cycro, but I'm just giving my opinion. :)

Thank you for using Drain Willows!
|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|bunn | 28350 | 420 | 2 |
|——–|——–|——–|——–|
Ran for 1 Hours, 33 Minutes and 42 Seconds
Successfully executed

I will be removing the deathwalk because there are no fighting randoms, so there will be no need for a deathwalk (unless your account is level 14 or lower then the dark mages will attack you) But you can just get 15 combat.

Edit - That might be a problem with the willow log counter feature, but I will fix that in the next version which will either be 0.17 or 0.20

|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|est | 56498 | 837 | 6 |
|——–|——–|——–|——–|
Ran for 2 Hours, 12 Minutes and 8 Seconds
Successfully executed

It ended because I died, (i'm under level 15)
What i'm just going to do is woodcut myself until the mages become unagressive, then i'll start the auto.
I had done that, but I wasn't at the computer, so i'm not sure exactly what had happened. They probably just killed me.

By the way, what type of breaks does this script take?
I couldn't really find anything in the code. (i know just the basics)

|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
| | 34628 | 513 | 0 |
|——–|——–|——–|——–|
Ran for 1 Hours, 17 Minutes and 26 Seconds

got a nice proggy for yoou here, the script ended because of a random event :(

|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|bunn | 62370 | 924 | 2 |
|——–|——–|——–|——–|
Ran for 3 Hours, 9 Minutes and 22 Seconds

Nice progress reports I'm just working on it a bit more to make it better

|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|bunn | 213570 | 3164 | 5 |
|——–|——–|——–|——–|
Ran for 10 Hours, 19 Minutes and 31 Seconds


very pleased with this script :) left it running overnight, wen i woke up it was still going !!!

Added version 0.20 Alpha.

Great script.

Thank you for using Drain Willows!
|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|Luh | 224168 | 3321 | 2 |
|——–|——–|——–|——–|
Ran for 6 Hours, 5 Minutes and 56 Seconds
Saved 0 screenshots
Successfully executed

Maybe add an autoresponder and a sleeper?

nice proggy, thanks for posting it :D

|--------|--------|--------|--------|
|Nick    |  EXP   |  Logs  | Levels |
|--------|--------|--------|--------|
|          64***  | 95*    | 1      |
|--------|--------|--------|--------|
Ran for 2 Hours, 38 Minutes and 54 Seconds
Breaks: 9

(I took out the last digits for security reasons–in case jgx is reading)

I tried a bunch of other scripts and I found this one to be the best and fastest! I like that it doesn't restart SMART when you run it, which sometimes causes errors and is annoying. I also like that there is no FORM! I find the player forms really unnecessary and take longer to work with. Thanks for not using them haha.

** I added:
SetRun(True); to the main loop to speed it up some more.
Breaks borrowed from Coh3n's script (although I changed the time values dramatically).

This script could really use and auto-responder and talker; I'm going to try and add them myself. I'm also going to put in a more detailed proggy for practice because I'm still learning scripting with SCAR (breaked at what time?/for how long exactly?/logs per hour/xp per hour/people talking?/how many times?/did the talking include player nick?/if so, what was the message?/how did player respond (auto)?/ etc…) If anyone has a link to a tutorial that would be helpful, I would appreciate it :o . The script no longer stops with the breaks added–randoms are drastically reduced.

5 Stars for such a well written script. +rep

Thanks for your contribution!!!

Thanks for the offer, but I can add these in myself I am just busy this week

Glad you liked it :)

Players were set up and script is running smoothly, I'll edit this post with the proggy… which probably won't be for a few hours since this is a great script!

Hehe, Thanks :) I worked hard on this one

Bump :)

|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|Luh | 823770 | 12204 | 2 |
|——–|——–|——–|——–|
Ran for 20 Hours, 49 Minutes and 43 Seconds
Saved 0 screenshots
Successfully executed


I win!

Nice progress report Ogre thats the longest so far - Added it to the main post

this script seems to mess up at bank

Could you please explain how it messes up in the bank? Because if you don't tell me whats wrong I won't be able to fix it

Script works very well on account that has no bank pin or has already gone to bank and inputted it.
It will however progress no further after bank presents it bank pin inputter.

That is a problem with bank.scar so they developers may need to fix that

worked for me untill it got stuck in abbis random, and it just sat there for ever saying can not find water color.

|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|andpa | 72900 | 1080 | 2 |
|——–|——–|——–|——–|
Ran for 3 Hours, 36 Minutes and 59 Seconds
Saved 0 screenshots

Payton


edit:

|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|**** | 43740 | 648 | 1 |
|——–|——–|——–|——–|
Ran for 1 Hours, 2* Minutes and ** Seconds
Saved 0 screenshots
Successfully executed

working pretty good so far. I will possibly post proggy if it runs well overnight. :). Didn't run overnight because my computer blew itself up. I do like the script, but it switches trees way too often. Like, when there are 2 slots in invent left over and someone gets on my tree, it switches. Maybe you could decrease the sensitivity? I don't know many people who switch trees 8 times a load on willows just because other people are there. Will post proggy though.

Released V 0.21 Alpha

goota thank ya man…..got me up so many levels since u first started making it!!!! thnx

cant post progress report i had my little brother shut it off when i was eating because my laptop was over heating, but i got from 41-53 woodcutting from it so far and its ran through one random. Havent been banned with it yet.
I dont like much the banking though, it gets lost alot. I might send you a fix later if it gets too annoying.

Okay - I can fix the banking but I am at school at the moment so I'll post a fix later

Increible script o.o

Yea the banking is seriously messed up. It always thinks the tree is in the bank and clicks around for a bit, then logs out.

Hey guys just decided to get back into runescape and stuff. I haven't been here for over a year. I tried out this script and it's worked great. So here's a few proggies for ya.

|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|Med | 109620 | 1624 | 1 |
|Jedi | 83160 | 1232 | 1 |
|Marc | 83160 | 1232 | 8 |
|——–|——–|——–|——–|
Ran for 15 Hours, 20 Minutes and 54 Seconds


|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|Med | 64260 | 952 | 0 |
|Jedi | 52920 | 784 | 0 |
|Marc | 43470 | 644 | 2 |
|——–|——–|——–|——–|
Ran for 8 Hours, 3 Minutes and 8 Seconds

All 3 methods of walking failed
|——–|——–|——–|——–|
|Nick | EXP | Logs | Levels |
|——–|——–|——–|——–|
|cce | 63788 | 945 | -45 |
|——–|——–|——–|——–|
Ran for 2 Hours, 28 Minutes and 55 Seconds
Successfully executed

Nice :).

Nice Mistagnerd, I think thats the only multiple person proggy ive seen

Ya no prob. I would have alot more but when I run this script, sometimes scar closes itself. I run this script quite frequently. Thnx.

Hey guys is there anything I should update?

Yeeeesss update it :D
But it will work fine with new runescape update ?

Haven't tested it, I'm just asking what things need to be updated on it?

From: cycrosism
Haven't tested it, I'm just asking what things need to be updated on it?

it cant find a dragon axe when you are wielding it and the banking needs work

Hmm maybe the dragon axe has changed, I did make a bitmap of it and put 30 tolerance to it (or 35 iirc) What is wrong with the banking?

This script is outdated, I will be working on it and I will post a fix in a few days. Thanks for your patience

Is it me or is it the download link isn't on the screen???:duh::duh::duh::duh:

From: bion92
Is it me or is it the download link isn't on the screen???:duh::duh::duh::duh:

A slight gravedig.

Still works???? Was looking for a new script but only have f2p

From: pooponu69
Still works???? Was looking for a new script but only have f2p

i doubt it, try some research on MSI, they have an epic woodcutter :)

I actually don't have a copy of this script anymore, if anyone has got a copy of my draynor cutter I will be more then happy to update it and make it work on Simba.

Edit: I managed to obtain Version 0.10 Alpha of this script from my SRL members application, but I have no idea how long it will take before I get this script to work, as I said it is very outdated and was made for scar.