SRL Archive - RS3 Outdated / Broken Scripts

Well, it chops willows at barbarian outpost! :)

Start the player at the trees:

Works with SCAR 3.20d and Rev 33. I use Dev SVN though.

Set the players up, and press run! :)

This scripts includes:

• AntiBan
• AntiRandoms
• TPA Tree Detection and Tracking
• Bank or Drop!
• Nest Finding
• Will POWER Chop ANY Willows.

Best Report: N1ke

- Nava2 Barbarian Outpost Willow Chopper v0.1! -

Player 0: ******* Active: False
Reason Inactive: Could not find tree to chop.
Gained 169155 xp, gaining 11 levels.
Cut 2484 willow logs in 92 loads.
Cutting at 436 logs per hour.
Collected 1149 nests. 445 rings, and 704 seeds.
Player's Time Worked: 19 Minutes and 27 Seconds

Time Running: 5 Hours, 42 Minutes and 10 Seconds

Please post reports. :) As well as bugs and suggestions ;)

~N2

Looks ok, nice coding i surpose.

I might give it a run later.

From: NiCbaZ
Looks ok, nice coding i surpose.

I might give it a run later.

What's wrong with it :( You haven't even looked at the script.

From: Nava2
What's wrong with it :(

Nothing? what?

The coding is nice, but you could of done the birds nest part lots shorter.

But its nice anyways.


Edit: Makes me want to make an epic color script.

Oh probably, I can see what you mean. I did that… A long time a go. :) It worked so, I was like, why not leave it! :D

looks promising will download and use soon on my lvl 97 wcer

guna test for aprox 30min. ill see how it goes

edit:i cant even get it to work

Care to explain?

Hmm, I think the worldswitcher doesnt work properly, cause i get this error:

[Runtime Error] : Exception: '' is not a valid integer value in line 75 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Misc/WorldSwitcher.scar

EDIT: Nevermind, I deleted the worldswitching thingy and now it works fine…
I don't know if you know it, but the smartSetup is setup with Members=True
EDIT EDIT: I'm feeling quite stupid since i didnt know that barbarian village isnt the same as barbarian outpost…

- Nava2 Barbarian Outpost Willow Chopper v0.1! -

Player 0: ******* Active: False
Reason Inactive: Could not find tree to chop.
Gained 169155 xp, gaining 11 levels.
Cut 2484 willow logs in 92 loads.
Cutting at 436 logs per hour.
Collected 1149 nests. 445 rings, and 704 seeds.
Player's Time Worked: 19 Minutes and 27 Seconds

Time Running: 5 Hours, 42 Minutes and 10 Seconds

Quality script baby ;)


Some feedback tho, The Findtree functions uptext check is only for illow!
in some cases it hovers over a dropped willow log and picks it up.

DoorFinding didn't work to well, so i used dropping.

And the nest finding needs some work xD

Thanks for another great script! - N1ke!

From: N1ke!

- Nava2 Barbarian Outpost Willow Chopper v0.1! -

Player 0: ******* Active: False
Reason Inactive: Could not find tree to chop.
Gained 169155 xp, gaining 11 levels.
Cut 2484 willow logs in 92 loads.
Cutting at 436 logs per hour.
Collected 1149 nests. 445 rings, and 704 seeds.
Player's Time Worked: 19 Minutes and 27 Seconds

Time Running: 5 Hours, 42 Minutes and 10 Seconds

Quality script baby ;)


Some feedback tho, The Findtree functions uptext check is only for illow!
in some cases it hovers over a dropped willow log and picks it up.

DoorFinding didn't work to well, so i used dropping.

And the nest finding needs some work xD

Thanks for another great script! - N1ke!

I'm thinking my nest COUNTING needs some help…

How many were actually in your inventory?

Also, I changed the UpText check as per your comment earlier.

The nests need to be changed I see… I have two different counting procedures, one for dropping since they stay in the inventory, and another for banking. I know the banking works, but apparently the dropping repeats.. :p

Barbarian Outpost is members only? :/

I suggest you make a boolean maybe so you can run it F2P with an army @ north of the crafting guild near Fally? You don't need any requirements, no one ever goes there (because it is far from the bank), but you can drop the logs?

From: Harry
Barbarian Outpost is members only? :/

I suggest you make a boolean maybe so you can run it F2P with an army @ north of the crafting guild near Fally? You don't need any requirements, no one ever goes there (because it is far from the bank), but you can drop the logs?

I was considering adding this in. Currently, it only calibrates at the outpost. But, good idea! :) I will look into it.

Line 1027: [Error] (17807:6): Unknown identifier 'GetDoorsIn' in script C:\Documents and Settings\*****\Desktop\Barbarian Outpost Willow Chopper! 0.1.scar

D := GetDoorsIn(MMCX, MMY1, MMX2, MMY2)

Uhm? I already replaced the file, in Scar/SRL/core … So what's wrong?

You have to replace in SCAR/SRL/misc

I just noticed that. :P Thanks.

SmartSetupEx unrecognized..?

i get the same error,


Failed when compiling
Line 1027: [Error] (17807:6): Unknown identifier 'GetDoorsIn' in script C:\DOCUME~1\Chris1\LOCALS~1\Temp\Barbarian Outpost Willow Chopper! 0.1.scar


But how do i replace?

From: botsrs
I just noticed that. :P Thanks.

SmartSetupEx unrecognized..?

Not even sure why it does that… Did you uncomment the include line?

From: NightShade1765
i get the same error,


Failed when compiling
Line 1027: [Error] (17807:6): Unknown identifier 'GetDoorsIn' in script C:\DOCUME~1\Chris1\LOCALS~1\Temp\Barbarian Outpost Willow Chopper! 0.1.scar


But how do i replace?

Just take the one attached here, replace the one in SRL/SRL/Misc/DoorProfiles.scar

{$DEFINE SMART} // Comment this to remove SMART.

{.Include SRL/SRL/misc/Smart.scar} // This as well.

My Includes lines.

  {$IFDEF SMART}
    SmartSetupEx(ServerNumber, True, Signed, False);
    SetTargetDC(SmartGetDC);
  {$ENDIF}

The error.


Exact Error:

Line 1355: [Error] (18073:1): Unknown identifier 'SmartSetupEx' in script C:\Documents and Settings\*****
\Desktop\Barbarian Outpost Willow Chopper! 0.1(2).scar

See, I couldn't make SMART work well either. Idk. That system should theoretically work. :(

{$Define SMART }

{$IFDEF SMART }
{.include…}
{$ENDIF }

{$IFDEF SMART }
SMARTSetupEX(_)
{$ENDIF }

?

Thats pretty much what I have.

From: Nava2
I was considering adding this in. Currently, it only calibrates at the outpost. But, good idea! :) I will look into it.

You should do it, then this script can be abused by free and pay players alike :p

Hmm… I only use SMART, but is there another way to be able to auto without taking over my mouse?

Virtual machines, but I have no idea how to do it.

- Nava2 Barbarian Outpost Willow Chopper v0.2! -

Player 0: ******** Active: False
Reason Inactive: Could not find tree to chop.
Gained 104287 xp, gaining 8 levels.
Cut 1512 willow logs in 56 loads.
Cutting at 426 logs per hour.
Collected 1149 nests. 445 rings, and 704 seeds.
Player's Time Worked: 3 Hours, 24 Minutes and 1 Seconds

Time Running: 3 Hours, 33 Minutes and 9 Seconds

This was power chopping.. At the spot Harry mentioned.

hmm wanted to use it but it doesnt compile , you should update it , its a quality script dont let it die !!

I have a copy. I will post it now.

Uploaded v0.2 :)

man i wish i was a member

From: Becks
man i wish i was a member

This power chops any willow tree. It works :)

From: Nava2
This power chops any willow tree. It works :)

thanks ill give it a go. Proggy soon.

Scar crashes as soon as I log in and I'm looking at the willows… o.o

Any more information?

wont compile for me either.

using the newest dev rev.

Line 870: [Error] (19772:10): Duplicate identifier 'DEPOSITSCREEN' in script C:\Users\User\AppData\Local\Temp\Barbarian Outpost Willow

but idk it could be my revision or something.

From: jesus45
wont compile for me either.

using the newest dev rev.

Line 870: [Error] (19772:10): Duplicate identifier 'DEPOSITSCREEN' in script C:\Users\User\AppData\Local\Temp\Barbarian Outpost Willow

but idk it could be my revision or something.

Just delete that procedure/function

delete it where?

From: jesus45
delete it where?

In the script

The script will work without that whole procedure/function?

From: jesus45
The script will work without that whole procedure/function?

yes, because it is already in SRL

I deleted that function and now i get this error:

Line 872: [Error] (19774:10): Duplicate identifier 'OPENDEPOSITBOX' in script C:\Users\User\AppData\Local\Temp\Barbarian Outpost Willow

Delete that function, then go to line 986 and change it into:

SetAllChats('filter', 'on', 'off', 'on', 'on', 'on');

alright man thanks loads. :)

Oh wow, I didn't realise that the new dev had the deposit bank stuff etc.

But, it won't work without mine. As the deposit box is white skull.

From: Nava2
Any more information?

I get no error message, but right after the I click the "click here to play button" and I'm logged in, scar crashes… This has never happened before.

From: jumbosped
I get no error message, but right after the I click the "click here to play button" and I'm logged in, scar crashes… This has never happened before.

Hmm.. What scar version?

Going to run overnight tonight. Im going now so i cant run it now, ive got to go

From: nava2
hmm.. What scar version?

3.20

ya i get the same thing i log in and both smart and scar close

i got scar 3.20d with the newest srl so i dont know what it is

From: y0m0mma0123
ya i get the same thing i log in and both smart and scar close

i got scar 3.20d with the newest srl so i dont know what it is

Yeah it makes no sense. Scar only crashes when u are at the willows, but when you're at a completely different location, scar doesn't crash.

EDIT: Okay I kinda fixed it. Just start the script about 6 squares east from where it tells you to be standing.

ok i will try that

i tryed that and what it dose is walks me past the trees and keeps clicking in the ocean and then loggs out so idk

Oh, well. I tried.

This needs an updation =/

ya it do

I can update it. Its not hard.. but I still don't see why..

Might be my DDTM.

wait why would u not update it?

Nava, it's working for you?

I meant I don't see why its not working.

hmm this idea looks quite famaliar :p i recall me attempting to make one for my members app but failed and just made a catherby willow choppa

Clicks on the fishing mini map icon every time it goes to bank.

its not working right now