SRL Archive - RS3 Outdated / Broken Scripts

Approved.

;D

Thanks

Well I have started to use the script, and let me just tell you, I'm quite impressed. It works much better than other auto cutters I have used so far.

Just a few things. It didn't print out my proggie in the debug after I stopped the script, so, I don't have the proof of the cutter work, but truth be told I gained 4 WC levels 15-19. One other thing is that while cutting oaks (which I was cutting) It seemed to have a low wait time between clicking on the tree to cut it even though I was cutting it already, it clicked on the tree again, at around 5-8 seconds each time.

Other than that, it is a wonderful script. Its running atm, so If it does give me a progress report, than expect it here:

Cheers for a wonderful script;)

Yeah, it does, I'm working on that at the moment. I am proud to say though, I believe it is one of the fastest cutters out there, at the moment.

But the proggy always prints, without fail. As soon as you terminate the script, it WILL print one.

begin
  Signature;
  SetupSmart;
  DoOnce;
  MainLoop;
  ProgressReport;
end.

As soon as you terminate the MainLoop, it prints a proggy.

Yeah I just tested it out, and it does print out the proggie, however I ran into another problem.

Here are the current settings I have running the script:

const
  MinutesToSleep = 10;

   Players[0].Integers[0]:= 10;   // Loads to Do.
   Players[0].Integers[1] := 60;  // Minutes before sleeping (1 player ONLY; Set 'True' below if you want this active)
   Players[0].Booleans[0] := True;    // Do you want to sleep? Reduces Randoms
   Players[0].Strings[0] := 'oak'; // ALL lowercase; normal, oak, willow, maple or yew
   Players[0].Strings[1] := 'true';  // Is your axe equipped?

I just cut out the main parts that were filled in. However, after completing one inventory, and I've done this 3 times, each time the same result, It continues to click the tree 4 times after a full inventory until it says 4 times in your chat box "Your inventory is too full to hold any more logs" Then the script commences to drop all the logs, check your WCing xp, and then log out, and the debug says It has started sleeping. I took the line in the declare players script, the time before sleeping as the time before it started to sleep for the 10 min, but maybe I'm wrong? It seems to always log out after each inventory.

Other than that, while running, it solves randoms like a charm, and finds new trees extremely quick, which I really like. I hope I'm not being too much of a noob towards you, because I really love the script, so don't take my comments as negative.

Running it now, looks good.:spot:

I think I must have the parameters set to sleep every 6 minutes, if it logs out after every load. I'll look into this error. The trouble is SRL is in ms, which is difficult because my maths isn't fantastic.

EDIT: Fantastic, it was the fact that my Greater than and less than symbology was mixed;

if RunTime >= (Players[0].Integers[1] * 60000) then

is what is should be, whereas it was

if RunTime <= (Players[0].Integers[1] * 60000) then

Updated.

I Personally like Camo Kyles woodcutter more, but this script is still really good.
Good job ToF!

From: Fluffybelly
I Personally like Camo Kyles woodcutter more, but this script is still really good.
Good job ToF!

Suspended. Good riddance.

I tried it once and it started to work perfectly, then it logged out and stayed that way. so it could of been just the sleep time which is normal, but it seemed longer than the expected time.

This is a good script, good job. I havn't seen one better than this one it was great.

you don't need LoadsCompleted = 0; do you?

because by default it starts at 0..

looks great ^^

(sorry, can't test.. I don't play runescape..
and what's with all the leeching? :\ nobody is posting proggies.. D: )

From: 99_
you don't need LoadsCompleted = 0; do you?

because by default it starts at 0..

looks great ^^

(sorry, can't test.. I don't play runescape..
and what's with all the leeching? :\ nobody is posting proggies.. D: )

It's for the loop, so every new player starts at 0, otherwise they would log out instantly.

And the proggies are sent to a website so I know when people are running ;)

Does this cut all trees or just Normal ones?

Normal/Oak/Willow/Maple/Yew

oh ok :P

and yeah I know that there sent to a webby but it's sad that nobody posts proggies :\

I used it for like 10 minutes then this came up:
[Runtime Error] : Out Of Range in line 344 in script C:\Users\USER\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\6X798PJH\TorrentsAnyWherePowerCutter%20V2.05[2].scar
What is this?

No proggy came, but I have this
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 29 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Talks : 1 |
| Old Men : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

But it worked fine before the error came up :)

ToF: You have to use begin/end after a for to do loop if you are calling more than one procedure, like you do in your chopping procedure.

From: Cazax
ToF: You have to use begin/end after a for to do loop if you are calling more than one procedure, like you do in your dropping* procedure.

I have done so in my chopping procedure now aswell, but in the SRL FindAxe, I copied it directly out of the SRL Woodcutting include.

EDIT: Uploaded 2.1

Very good script, i am very impressed 4.5/5 , this ios my first script ive used btw

[Runtime Error] : Out Of Range in line 344 in script C:\Program Files\SCAR 3.15\Scripts\TorrentsAnyWherePowerCutter V2.05.scar

Help please? I'm getting this when it has been running for about 10 minutes

Im not sure why it gives the runtime error. I think I may have fixed what it could have been.

Line 130: [Error] (16617:77): Syntax error in script

ummmm could u give me a hand?

From: trentuno30
Line 130: [Error] (16617:77): Syntax error in script

ummmm could u give me a hand?

How many players are you trying to use?

Hmm…your script still pwns mine :) Keep it up.

~Camo

Nah, my script has too many errors :(

i get this error when i try to run the script:

Line 68: [Error] (68:1): Unable to register function function FindGapsTPA(TPA : TPointArray; MinPixels: Integer): T2DPointArray; in script C:\Documents and Settings\Lucas\My Documents\Downloads\TorrentsAnyWherePowerCutter V2.1.1.scar

Yeah, LOTS of text

Make sure you have the newest rev of SRL or get Rev #30…That's what I'm using…Btw, are you getting these errors when you compile it or run it? It compiles just fine for me.

~Camo

I dont get many, its just other people seem to get runtime errors? :/

Thanks:)

Im just glad it's smart :p :rolleyes:

EDIT:

[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 0 Seconds                  ]
[ Loads: 0                                ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 0                         ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 0                       ]
[=================== ToF =================]
Successfully executed

:mad:

Um, what is this?

I click run, it says running script for about a second, then it goes script finished.

It doesn't do anything, help?

From: umidk
Um, what is this?

I click run, it says running script for about a second, then it goes script finished.

It doesn't do anything, help?

Omg. Same Here! That's What I said above! :fiery: :mad:

Did yall setup the DeclarePlayers correctly and select the RS client?

~Camo

From: Camo¤Kyle
Did yall setup the DeclarePlayers correctly and select the RS client?

~Camo

Yerp.

From: Eias
Yerp.

Yep! I looked at the whole script and it looked fine! I didnt change anything! hmm I dont no what's going wrong

yow, think i got the same problem, i fill in the name pass etc, push run, then i get this:


[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 0 Seconds ]
[ Loads: 0 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 0 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 0 ]
[=================== ToF =================]
Successfully executed

From: Paas
yow, think i got the same problem, i fill in the name pass etc, push run, then i get this:


[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 0 Seconds ]
[ Loads: 0 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 0 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 0 ]
[=================== ToF =================]
Successfully executed

Yep I get the same Problem!

Yeah alright ffcfoo, stop spamming after every post. Post ONCE. I get the idea? You dont have to post 'yeah, i get that too!!' after every time someone new posts it.


The main loop was still set up to test the progress report;

begin
  {Signature;
  SetupSmart;
  DoOnce;
  MainLoop;}
  ProgressReport;
end.

Fixed.

Thank you for providing a "free for all" script.
This is the first script I've used in scar since Moparisthebest's Iron Miner.

In short, I appreciate your hard work, =].

Trying it now,thanks for fix.

Hey it works fine, but when it sets up and all, it just keeps clicking one spot, making me walk further and further away.

It doesnt walk?

I need help.. My script starts.. runs for 0 seconds and then its executed. why? plz help ty

get the latest version from the front page.

ok tyvm ima try running it now

so when im logged off i start the script, it opens the SMART window, does it login it self, does it take a while? i waited about 2 mins then logged in my self but it didn't do anything
EDIT: It has been 3 minutes and Runescape is not yet ready… Terminating
Successfully Executed.
Why does it do that?

Eh it worked. but now it just keeps going back and forth from my invy to stats. help?

Smart is failing..

From: vova9416
so when im logged off i start the script, it opens the SMART window, does it login it self, does it take a while? i waited about 2 mins then logged in my self but it didn't do anything
EDIT: It has been 3 minutes and Runescape is not yet ready… Terminating
Successfully Executed.
Why does it do that?

I've gotten that today, It works sometimes but not all of the time.

From: ffcfoo
Yep! I looked at the whole script and it looked fine! I didnt change anything! hmm I dont no what's going wrong

hmm well by "didn't change anything did you….put in your char and setup declare players? haha :P

tyvm torrent its working =)

hmm a Mystery Man appeared, the character ignored it and then got teled somewhere.. why? do i have to set that up somewhere?
Also the Mystery Box doesn't get solved

in the DeclarePlayers procedure, make sure the nickname is 3-4 letters of your user name..

so if your name is Zezima, set your nick as zima or ima or ezi or zim :)

i got another problem.. my auto-er solves the box but when it gets confused.. it logs out and then it says in SCAR : (NextPlayer Active; False)
it says the the script is running, but it doesn't log in on my char, i only have 1 char, not an army. plz help ty

:) thank you vary much. this is the first script i got to work. it works GREAT

From: vova9416
i got another problem.. my auto-er solves the box but when it gets confused.. it logs out and then it says in SCAR : (NextPlayer Active; False)
it says the the script is running, but it doesn't log in on my char, i only have 1 char, not an army. plz help ty

nextplayer:false; will make it so it doesn't go back on the char you were just on..

if you REALLY don't wanna use more than 1 char, just make multiples of the same char.. but.. doesn't really help if it's an unsolvable..

tyvm

I am extremely expressed

if You Dont Tell Me What To Update, I Cant Update It. Make Some Posts People!

Looks good, gonna test it :).

I used the script and it worked for me but I died when i went for dinner is there something Im doing wrong?

I also wondered if it talks to the drunk dwarf or other randoms cuz it's not working for me.

Other than that it works great!

From: jackchen10
I used the script and it worked for me but I died when i went for dinner is there something Im doing wrong?

I also wondered if it talks to the drunk dwarf or other randoms cuz it's not working for me.

Other than that it works great!

No, theres a problem with SRL AntiRandoms ATM. Sorry about that.

Many thanks, an awesome script! :D

awesome! works great out of the 1st time,never hadproblems with it, thanks

Works like a charm except that it didn't do anything about the lumberjack random.

nice script nice anti bans, id rate this 7/10 but thats just me, and i have high standards:eek:

This is the best cutter script i used so far, except for one thing… it doesnt dropp te wood, can somebady help me?

Good job, got it running right now.
Just finds slow Oak's, and sometimes confuses it with normal tree's but that aint a problem ;)

I will post proggy when i get back :)


Edit: U need to update more faster oak finders and make it not confuse with normal tree's (that's the only thing i can find atm :o)


Edit 2: Phew, lucky i looked: The sandwich lady almost hitted me lol :p u got work on anti random too

Edit 3: (yea lol) it's got a great ent finder!!

nice script =)

From: blink
nice script nice anti bans, id rate this 7/10 but thats just me, and i have high standards:eek:

Lol high standards?

U need to update more faster oak finders and make it not confuse with normal tree's (that's the only thing i can find atm :o)

The reason why it does that is because the oaks and normals are so close to the same color.

u got work on anti random too

That isn't the scripts fault, SRL's randoms are kind of down right now.

==========AnyTreePowerCutter by Camo Kyle==========
||===== Time Running : 5 Hours, 35 Minutes and 1 Seconds
||===== Player 0:inj: Did 11 Loads and dropped 308 Logs and you gained 0 Woodcutting Levels!

Wrong thread :p

~Camo

Hmm… I'll try it sometime.

If the auto have drop the logs have i this error:

How can i stop this error/warning?
nice script i'll try this if i have errors i post.

[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 33 Minutes and 24 Seconds ]
[ Loads: 8 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 216 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 43 ]
[=================== ToF =================]

Promised to post a proggie :)

^ Thanks Camo, and thank you SantaPker ;)

No problem bro, just trying to help lol. Is it still giving error?

~Camo

Awesome! Too bad the anti random isn't working well. I ended up in lumby basement once, and wiz tower once. I couldn't get the oak to work, it just kept switching from stats to inv over and over. Here's the proggy (i think thats what these are)

[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 15 Minutes and 6 Seconds ]
[ Loads: 1 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 28 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 22 ]
[=================== ToF =================]
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 29 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Talks : 1 |
| Ricks : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

beautifull script!! love it solves my randoms, drops my logs, runs away from fights!! its perfect thanks!!

wowzerz looks alright D: gj :D

jurrien. just press ok. Thats a private server that sends my progress reports to the internet so I can monitor them if people dont post them.

it looks better than the other ones i will defintely try it

When i downloaded the script and it said t will work for 60 min untill sleep. i was wondering if i could pick it up like 120 min or maybe even more and bring the load up? can i do that or it better not to?

Yeah. You can set it to any value you want, Recon, and it will sleep after that amount of time.

I still think that the auto color picker or whatever is a little off
It keeps switching from inv to stats on oak… Help?

gonna try it right mow ill post tommorow on how it works;)

umm ya i tried it and it froze the script and so idk:eek:

Thanks for the help man

awsome awsome awsome!!!!!
i luv this script, im pretty noob and this is the first one that i got to work the first time i ran it! its still going now so i should have a proggie for u soon.

Edit: Stopped it manually but didnt see the proggie :(

Edit: i find it has trouble with the random 'Shamus the lepricorn' but its great with Ents… daaaammmmmn you shamus!!!

er like wtf? error smartiskeydown in line 4. can u fix this

[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 6 Minutes and 32 Seconds ]
[ Loads: 1 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 25 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 31 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 42 Minutes and 1 Seconds ]
[ Loads: 2 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 50 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 32 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 1 Hours, 4 Minutes and 53 Seconds]
[ Loads: 3 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 75 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 33 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 1 Hours, 21 Minutes and 27 Seconds]
[ Loads: 4 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 100 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 34 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 1 Hours, 39 Minutes and 48 Seconds]
[ Loads: 5 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 125 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 35 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 1 Hours, 54 Minutes and 3 Seconds]
[ Loads: 5 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 125 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 35 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 2 Hours, 14 Minutes and 12 Seconds]
[ Loads: 6 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 150 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 35 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 2 Hours, 32 Minutes and 8 Seconds]
[ Loads: 7 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 175 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 36 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 2 Hours, 52 Minutes and 26 Seconds]
[ Loads: 8 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 200 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 37 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 3 Hours, 14 Minutes and 4 Seconds]
[ Loads: 9 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 225 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 37 ]
[=================== ToF =================]

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 29 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Fights : 4 |
| Talks : 1 |
| Old Men : 1 |
| Boxes Solved : 3 |
| Ents Found : 3 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

Excellent, i'm running it right now; I will post a proggy once it finished ~.^

EDIT: It can't do genie randoms.

looks awesome and running great

What is the REV?

hi im new to scar, but when i click run i get this

Line 4: [Error] (4:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL\misc\SMART.scar

really good power cutter, cba with going to the bank and stuff

thanks gonna try this

Everything works fine except the autodropping logs and the anti random. Once my inven is full, it just keeps clicking its way through.

EDIT: just takes a min or two for autodrop. random events are fine

I'm going to go ahead and test this out real quick.

EDIT: Ran great for nearly an hour until I shut it down. Gained nearly 3 wc lvls from 55-58 on doing Willows in Draynor. A progress report didn't show up though so thats something you can look into. Other than that, impressive script.

Used this script just a few days ago and got 5 levels from 58 to 63. Only thing is that when i'm done it doesnt post a progress report and randoms like the highwayman, sandwich lady, genie, demon teacher dont work.

[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 4 Minutes and 44 Seconds ]
[ Loads: 1 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 26 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 65 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 9 Minutes and 15 Seconds ]
[ Loads: 2 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 52 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 66 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 13 Minutes and 43 Seconds ]
[ Loads: 3 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 78 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 66 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 21 Minutes and 35 Seconds ]
[ Loads: 4 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 104 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 66 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 26 Minutes and 16 Seconds ]
[ Loads: 5 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 130 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 66 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 30 Minutes and 15 Seconds ]
[ Loads: 6 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 156 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 66 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 35 Minutes and 4 Seconds ]
[ Loads: 7 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 182 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 66 ]
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 29 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Fights : 6 |
| Demons Solved : 1 |
| Ents Found : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

hehehe still going!

Btw doesnt run away far enough, had to step in. (previously ive died multiple times) Loved how cool it was when solving the demon! Wonderful! Got smacked by sandwich lady… not your fault. I think you want it to set up the compass to the north? Cuz its lining up east…

Sweet Script! Lvl 10 to 66 in less than 2 weeks!

EDIT: Don't know where it avoided the Ent… look into that…

EDIT2: LOL! Died when i was editing!!! :o

It's SRL's fault that the randoms are failing, not myselfs. And Jagex are updating the randoms at the moment, so this may be why the 'run away' way of avoiding randoms isnt working.

Haha… Banned. Oh well, probably my fault for using it so much :) and not taking breaks to play legit. Appeal pending.

hey guys i am so new to this..i downloaded..draged the cursor to my rs screen..clicked play..and nothing happend..wtf am i doin wrong? :o :confused:

nice

great script. truly inspirational. lol i want to learn this language now. Just downloaded VB, and will start ASAP.
No probs with the script, other than im not sure how to set it just for one player. It cuts, drops the load then stops, as NextPlayer(Active: False);
Please help, as i know theres something i need to change in the script, but have been looking and cant think what. thanks in advance.

EDIT. Oh ye and it cant do the mystery quiz random. and is there anyway of turning that Internet proggie link off, because i need to click it after every load, even when ive clicked the 'always' box

ill try it out

script wont solve the mystery box random

worked quite nice battery ran out couldn't post the proggie about 3 hours running though

Working very nicely! Will post the proggie when it is done.

So far running good but it dont show me proggies for it..:redface:

Well… it appeared to work fine. I watched it do it's thing for a bit, then I went afk. 2 hours later, I had gained 2 wc levels (45-47), but something strange happened along the way. I ended up in the wizards tower, spinning endlessly and clicking on the same spot over and over.

Failed random handling perhaps?

After I stopped I had the following logs:

[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 6 Minutes and 57 Seconds ]
[ Loads: 1 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 28 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 46 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 12 Minutes and 3 Seconds ]
[ Loads: 2 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 56 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 46 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 19 Minutes and 7 Seconds ]
[ Loads: 3 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 84 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 46 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 23 Minutes and 53 Seconds ]
[ Loads: 4 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 112 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 46 ]
[=================== ToF =================]
Ent Found!!
Waiting for it to go away.
Ent Found!!
Waiting for it to go away.
Successfully executed

_and_

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 29 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

Screen shot:

And options setting (for me):

YourSRLId = 'automotron';
YourSRLPassword = '****';
MinutesToSleep = 10; // Random 5 minutes will be added
SmartWorld = 126;


procedure DeclarePlayers;
begin
HowManyPlayers := 1; //How many Players
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0; //Starting Player

Players[0].Name := '****';
Players[0].Pass := '****';
Players[0].Nick := '****';
Players[0].Active := True;
Players[0].Integers[0]:= 50; // Loads to Do.
Players[0].Integers[1] := 60; // Minutes before sleeping (1 player ONLY; Set 'True' below if you want this active)
Players[0].Booleans[0] := True; // Do you want to sleep? Reduces Randoms
Players[0].Strings[0] := 'willow'; // ALL lowercase; normal, oak, willow, maple or yew
Players[0].Strings[1] := 'true'; // Is your axe equipped?

From: Krew Krux Volcom
hey guys i am so new to this..i downloaded..draged the cursor to my rs screen..clicked play..and nothing happend..wtf am i doin wrong? :o :confused:

For one, you have to click "Enable Smart" in the runescape window that pops up. And you have to configure the first part of the script with username, password, type of tree to cut, etc.

I think it was just a walking flaw. Like it tried randomclicking and failed epicly.

Thanks for the script. It really is flawless and the antirandoms is really good. :D
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 32 Minutes and 54 Seconds ]
[ Loads: 5 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 138 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 23 ]

[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 10 Minutes and 44 Seconds ]
[ Loads: 2 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 38 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 68 ]

Thanks, works perfect.

From: Torrent of Flame
I think it was just a walking flaw. Like it tried randomclicking and failed epicly.

Yeah, most likely. Good experience with this so far, except I have to check on it every once in a while. But that's SRL's problem, not your's ;)


[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 4 Minutes and 21 Seconds ]
[ Loads: 1 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 28 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 51 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 8 Minutes and 30 Seconds ]
[ Loads: 2 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 56 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 51 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 12 Minutes and 30 Seconds ]
[ Loads: 3 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 84 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 51 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 17 Minutes and 10 Seconds ]
[ Loads: 4 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 112 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 51 ]
[=================== ToF =================]
GTL: Frog Cave
******** FROG RANDOM MISSED ********
Successfully executed

I like it!

Line 68: [Error] (68:1): Unable to register function function FindGapsTPA(TPA : TPointArray; MinPixels: Integer): T2DPointArray; in script C:\Users\Torben Lund\Downloads\TorrentsAnyWherePowerCutterV2.1.2.scar

I get this error :\
What can I do?

Nevermind, I got it working..

I'd hug you right now. It's great! :D
Really nice job ^^,

It's running as we speak, and I can be nothing but satisfied (:
Maybe a little awkward with the multiple clicking, after the inventory is full, but that's just about it (:

awesome script.

Been runing for about 3hours or so, sorry no prog report to post! very nice script. there does not seem to be any failsafe for when it cant not find any trees to chop?

you cant have a failsafe for not finding trees, if there arent any theres nothing you can do..?

And you havent been running for 3 hours. Noone has lately.

Why bother lying? Post something constructive.

looks good…. actually looks great[BANANA][/BANANA]

Tried it out, and it worked fine for me.

I'm gonna leave it on overnight, and post a proggie in the morning. (:

nice, i will use this.

I just got scar and would like to download the woodcutter script. Could you help me get this going on Runescape. That would be really appriecated.

its easy :)
just fill the forms in the script?

how do u even use it im knida new so

Anyone got +3h prog? Mine best is only 50mins…

From: Yo Yoker
Anyone got +3h prog? Mine best is only 50mins…

Same here, randoms are especially a problem with woodcutting and they're updating them right now.

I already gots 99 wc :D

ill still give it a whack though

Can you make it so it banks? :D

The antirandom like broke,the old man came and put me on wolf mountain,I doubt this will be able to go overnight. :(

well its good but the randoms its bad…its never NEVER once ran away or talked to any random besides the ent which isnt really a random.

the mysterious box on the other hand that works its really gd takes like 1 min n it solves the box

NICE JOB THOUGH ;)

From: AustinM
Can you make it so it banks? :D

The antirandom like broke,the old man came and put me on wolf mountain,I doubt this will be able to go overnight. :(

^ Randoms aren't the scripter's fault. Banking would make it a Jr. Mem script, and would be almost impossible considering it's an ANYWHERE power cutter.

From: Yo Yoker
Anyone got +3h prog? Mine best is only 50mins…

^ I think I posted a 2hr 40 min proggy or something like that on like page 5…?

From: saradominlye
well its good but the randoms its bad…its never NEVER once ran away or talked to any random besides the ent which isnt really a random.

the mysterious box on the other hand that works its really gd takes like 1 min n it solves the box

NICE JOB THOUGH ;)

^ Honestly…. you people need to go to the tuts on how to auto… Jeez…

From: Torrent of Flame
you cant have a failsafe for not finding trees, if there arent any theres nothing you can do..?

And you havent been running for 3 hours. Noone has lately.

Why bother lying? Post something constructive.

^ Yep, 3hr proggy page 5 last one…

Thank you, RickyRombo :D

Thanks man! This script is really good, except the only comment I have to say is that genies seem to trump it. Is that normal or am I doing something wrong I saw two of them and my guy did nothing until they teleported him someplace random. But I watched it solve a cube and I gotta say man that was amazing cheers!

wow tom, can you read? its in like.. big red letters on the first post.

When I run this, It loads the login then halts.
Maybe my system?

From: Torrent of Flame
wow tom, can you read? its in like.. big red letters on the first post.

Yes, but it was my fault i didn't understand the nickname thing and i fixed and it works great.

From: Torrent of Flame
wow tom, can you read? its in like.. big red letters on the first post.

Yes I'm sorry I didn't notice it, but it was my fault i didn't understand the nickname thing and i fixed and it works great. Here's the report:

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 29 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Talks : 1 |
| Capn Hands : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/


[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 4 Minutes and 4 Seconds ]
[ Loads: 1 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 27 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 59 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 9 Minutes and 49 Seconds ]
[ Loads: 1 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 27 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 59 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 12 Minutes and 47 Seconds ]
[ Loads: 2 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 54 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 59 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 18 Minutes and 37 Seconds ]
[ Loads: 3 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 81 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 59 ]
[=================== ToF =================]

Is all the breaks the time it slept?

Every time i try script it says

Line 4: [error] (4:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL\misc\SMART.scar

is this outdated or am i entering it wrong?

[Runtime Error] : Out Of Range in line 344 in script C:\Users\USER\AppData\Local\Microsoft\Windows\Temp orary Internet Files\Low\Content.IE5\6X798PJH\TorrentsAnyWherePow erCutter%20V2.05[2].scar

i got same error as thegreatbeast im also using smart though but it shouldnt make a diff

Update your SRL Rev/SCAR.

Thank you next question.


tom43, it takes a break every 'x' minutes, and sleeps for 'y' minutes.

Hi!
how i set him to auro cut? never used any script before^^ so can u plz tell me how to do?

The script compiles fine but i get a pop up saying
MSVCR71.dll was not found and JVM.dll was not found

Works pretty good :)
Thanks!
+ fav

so far working great first one to get working.

Nice script also i'd like to know how to change the amount of minutes i want it to sleep and take a break THANK YOU.

Nice script ive tryed it out and it works excellent…left it playing for abwt an hour or so. Gtz on ur script ang GL scripting
J.Z

im currently running the script now an it looks awesome but i have a question

when im running smart do i have the smart screen pulled up on my screen for it to work

Ive used this script as well. as a whole i like it. the only thing is every hour or so when i check it, its either logged off or in random place that i was either smacked by sandwhich lady to or in random location for not answering to random. is this normal or is it a bug?

"Torrent of Flame", thanks so very much. It's a great script. This will keep me busy while trying to figger out how to make scripts myself so I can contribute, maybe just a little, to this great forum ^^ Definately going to take a look at the Jr. Mem scripts when I'm allowed to…

I'll try to run it for a longer period of time and post a report of it.

Being a Registered User/Chicken myself, I have no right to speak, but after reading 8 pages I do notice a lot of those people having a lack respect for someone putting time in this script and most of all being too lazy too look things up themself. Guess the whole leecher thing is true, eh.
If you just read the instructions and the tutorials on this very forum, you'll be able to figure everything out yourself.
Thanks again =)

Reload this Page Anywhere Power Cutter - By ToF

[======Anywhere Power Cutter==============]
[ By - By ToF ]
[=========================================]
[ Written 06:33:55 PM on 18-02-09. ]
[ 88 Minutes and 45 Seconds ]
[ Players: 1 / 1 ]
[ Loads: 7 ]
[ Rested: 3 ]
[ Responded: 0 ]
[=========================================]

Hum, my player seems to take a rest after every load =P

[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 6 Hours, 18 Minutes and 24 Seconds]
[ Loads: 37 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 1036 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 83 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 6 Hours, 31 Minutes and 47 Seconds]
[ Loads: 38 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 1064 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 83 ]

Being a newbie and all I don't mind =P But it might have something to do with

RunTime := GetTimeRunning;
if (Players[CurrentPlayer].Booleans[0] = True) then
begin
if RunTime >= (Players[0].Integers[1] * 60000) then

if runtime is higher than let's say 3.6 million it "goes to sleep".
My runtime was set on like 7 million and just kept growing…

Started it over and now it seems to work great again. Turned the auto-sleep off, so let's see whats going to happen now…

I get around 500 willows per hour without the resting after each load with this script, that IS prety fast indeed =)

[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 1 Hours, 1 Minutes and 4 Seconds]
[ Loads: 18 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 504 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 83 ]

This is the first script im using in my life on SCAR Divi.
All the scripts sed error this, error that. i hated it.
than I tried yours, and it works!! :D

thanks thanks thanks, im cutting willows and its nice training, just started, im gonna watch TV and let it happen. i wanna thank you.

I hope somebody will make soon a clay mine script of varrock, really need that 1. but yeah, i will see.

this is also my first post. :P

Cyaa guys

Auch, i just checkd, its stopped, only 1 load.. :(

great script!!!

nice jod dude iam going to check it out later

simply awsome ;X

I dont know what you mean by failing randoms. it worked great nice job.

give it a whirl now will report back later have set up 3 accounts going from level 1 on it =D

this is my personal fav wood cutter by far the best one keep up the good work

DUDE! Do you kick ass or do you kick ass?

This is the best mo'fkin script I have EVER used :O
It's been running 40 mins now and I can't see it failing any time soon. ( Haven't had any randoms yet tho :\ ).

I haven't used scar since around version 2.1 back then no such thing as Runescape high detail, No such thing as SMART. But omfg. I can actually do other shit while this thing cuts for me. L-E-G-E-N-D-A-R-Y!

Anyway it's working like a BEAST!

However the only things I am concerned with is:

1. It takes so long after it has a full invent to actually drop the logs, and it always clicks the same amount of times on the tree even when the invent is full before it starts to drop the logs. (4 times)
In my opinion this = ban. Because its too much of a consistency.

2. The way it right clicks AND THEN left clicks is a bit unhuman like. (Left clicking out of the box and yet it still working) If you have a close look you'll see what I mean.

But omg other then that it works! It actually works! I'll have a good proggie for you soon mate :D!

P.S Don't take anything I said as criticism I'm sooooooo pleased and grateful that this is free.

hey i got an error when using ur script
it said i have no reflection.scar in includes.
how to fix it ?

download reflection ;)

that was one of the best scripts ive seen so far,nicely done!

hope i works good, trying it right now ^.^
thank-you.

It should work,ant.

Worked for me when I tried it the first time!

Excellent script! :)

For some reason it wont let me post a proggie. I mean there is no where when it stops that I can put a proggie.

Another really weird thing is that I've had this running for hours and hours without rest mode on and I haven't gotten a single random event.

Whats up with that? It's good I mean but seriously I want to know if the Anti-Bans' and Anti-Randoms work.

can anyone tell me where can i download reflection scar?

Another inspiration for a good WC

Dude, amazing script. got a little laggy towards the end but still awesome job.

Failing at randoms, and sometimes i appear in Wizard Tower.

i dont know how to get scripts on scar and i dont know how to get the scripts
can someone help me?

yay it works, thank you for this script, first time I use SMART and I love it.

:spongebob:

can anyone tell me where can i download reflection scar?

Delete your SRL forlder inside scar>icludes startup scar goto menu and click donwload SRL. So it worked for me,

nice script

I Have been using this script for about 3 days.

I go and use it today and it cant find my axe?
its been in the same place as it always has, i even tried putting it in inventory. doesnt detect it all of a sudden help?

Awsome Keep up the good job mate xD

Sweet works thanks

Very Nice Script! Gained three levels with no interuptions. I will post a proggie soon.:D

it s a nice script but it logs out after som time

am still using this. Its AWESOME!!!!!!

works great thanks babe

Wow one of my friends is using this and he said its working perfectly

Wow. This is still going? 0_o

Nice script :)

Will post a proggy tommorow :D

Why does it say No axe found. when i use a dragon axe and i was reading your script and its suppose to say Dragon axe? It still works but just telling you. and ill post a proggy when it ends

Great work ToF i have only been using scripts for two days and this is the only one i have been able to follow and actually use. Great Work :)


Keep it up

i have used the script for 1 day and all of a sudden when i level up woodcutting it keeps saying congrats 54woodcutting but i got that last time and wont go up.

Keep up the great work ToF, the script works great! With the addition of smart, my first ever using it, it was amazing!

I'm running it as we speak… er… type, and i'm wondering, is it meant to change trees while you're still chopping one? Also, it missed the last log in my inventory, and took until the chatbox was filled with "your inventory is too full…" to recognise that my inventory was full. However, it only missed a log once, and it doesn't matter much anyway.

Other than that, it's great!

EDIT: It stopped… It randomy said "nextplayer = false" or something in the scar window, and it stopped…

really good powercutter

[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 1 Minutes and 43 Seconds   ]
[ Loads: 1                                ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 28                        ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 65                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 7 Minutes and 44 Seconds   ]
[ Loads: 2                                ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 56                        ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 65                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 13 Minutes and 39 Seconds  ]
[ Loads: 3                                ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 84                        ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 65                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 18 Minutes and 44 Seconds  ]
[ Loads: 4                                ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 112                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 65                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 25 Minutes and 18 Seconds  ]
[ Loads: 5                                ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 140                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 65                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 30 Minutes and 57 Seconds  ]
[ Loads: 6                                ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 168                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 65                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 38 Minutes and 47 Seconds  ]
[ Loads: 7                                ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 196                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 65                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 45 Minutes and 30 Seconds  ]
[ Loads: 8                                ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 224                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 65                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 52 Minutes and 3 Seconds   ]
[ Loads: 9                                ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 252                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 65                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 58 Minutes and 55 Seconds  ]
[ Loads: 10                               ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 280                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 65                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 1 Hours, 4 Minutes and 32 Seconds]
[ Loads: 11                               ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 308                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 65                      ]
[[=========================================]
[ Running For: 1 Hours, 22 Minutes and 25 Seconds]
[ Loads: 12                               ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 336                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 66                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 1 Hours, 40 Minutes and 29 Seconds]
[ Loads: 13                               ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 364                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 66                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 2 Hours, 0 Minutes and 18 Seconds]
[ Loads: 14                               ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 392                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 66                      ]
[=================== ToF =================]
[   Torrents Anywhere Power Cutter V2.1   ]
[=========================================]
[ Running For: 2 Hours, 19 Minutes and 50 Seconds]
[ Loads: 15                               ]
[ Broken Axes: 0                          ]
[ Logs Dropped: 420                       ]
[ Ents Avoided: 0                         ]
[ Current WC Lvl: 66                      ]
[=================== ToF =================]
HTTP/1.1 302 Found
Now Sleeping

Great script, I'm loving it. That's just some of it.
I've actually used this to get from 58 to 66 WC, cutting maples, thanks!

I've had like 4 randoms, and it's been unable to solve any, so I dunno, I guess that needs some work, but I keep an eye on my autoers, so it doesn't bother me.

4 randoms leveling from 58 to 66, not to shabby, eh?

Sorry I don't have the previous logs.

Rarely any errors at all!


-Keep up the good work!





EDIT: ALSO my first time using SMART, and I love it!
All you other talented scripters out there should be more like ToF and implement SMART in your scripts! :D

EDIT #2: Hey, look at that:

***** STR: FOUND RANDOM: 'Pinball' *****
Starting the pinball solver.
Pinball Solved.
***** STR: 'Pinball' RANDOM SOLVED SUCCESSFULLY! *****

i have question can i run 2 runescape wit the same scar like i wanna do it my acc and my lil bro's acc in the same comp

hey i get this. then my guy stops doin anything wat should i do just stop it and rest?
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 14 Minutes and 44 Seconds ]
[ Loads: 4 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 112 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 57 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 17 Minutes and 59 Seconds ]
[ Loads: 5 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 140 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 57 ]
[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 21 Minutes and 7 Seconds ]
[ Loads: 6 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 168 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 0 ]
[=================== ToF =================]
HTTP/1.1 302 Found
NextPlayer(Active: False);

[=================== ToF =================]
[ Torrents Anywhere Power Cutter V2.1 ]
[=========================================]
[ Running For: 1 Hours, 39 Minutes and 48 Seconds]
[ Loads: 27 ]
[ Broken Axes: 0 ]
[ Logs Dropped: 756 ]
[ Ents Avoided: 0 ]
[ Current WC Lvl: 40 ]

Here is my code:

const
                                  YourSRLId = 'Devoker';
                               YourSRLPassword = '**********';
                MinutesToSleep = 10; // Random 5 minutes will be added
                                SmartWorld = 126;


procedure DeclarePlayers;
begin
   HowManyPlayers := 1; //How many Players
   NumberOfPlayers(HowManyPlayers);
   CurrentPlayer := 0; //Starting Player

   Players[0].Name := '**********';
   Players[0].Pass := '**********';
   Players[0].Nick := 'devoker';
   Players[0].Active := True;
   Players[0].Integers[0]:= 50;   // Loads to Do.
   Players[0].Integers[1] := 60;  // Minutes before sleeping (1 player ONLY; Set 'True' below if you want this active)
   Players[0].Booleans[0] := True;    // Do you want to sleep? Reduces Randoms
   Players[0].Strings[0] := 'willow'; // ALL lowercase; normal, oak, willow, maple or yew
   Players[0].Strings[1] := 'false';  // Is your axe equipped?

Here is my problem:

Invalid world number or corrupted world list. Please review your settings

From: Devoker
Here is my code:

const
                                  YourSRLId = 'Devoker';
                               YourSRLPassword = '**********';
                MinutesToSleep = 10; // Random 5 minutes will be added
                                SmartWorld = 126;


procedure DeclarePlayers;
begin
   HowManyPlayers := 1; //How many Players
   NumberOfPlayers(HowManyPlayers);
   CurrentPlayer := 0; //Starting Player

   Players[0].Name := '**********';
   Players[0].Pass := '**********';
   Players[0].Nick := 'devoker';
   Players[0].Active := True;
   Players[0].Integers[0]:= 50;   // Loads to Do.
   Players[0].Integers[1] := 60;  // Minutes before sleeping (1 player ONLY; Set 'True' below if you want this active)
   Players[0].Booleans[0] := True;    // Do you want to sleep? Reduces Randoms
   Players[0].Strings[0] := 'willow'; // ALL lowercase; normal, oak, willow, maple or yew
   Players[0].Strings[1] := 'false';  // Is your axe equipped?

Here is my problem:

Invalid world number or corrupted world list. Please review your settings

Doubt it will help with your problem, but just for the sake of it, the Nick is supposed to be 3 or 4 letters in your name.