SRL Archive - RS3 Outdated / Broken Scripts

Clay Softener


faster789

2008-04-19 21:54:27

NOTE TO EVERYONE: PLEASE DO NOT USE THIS SCRIPT AS THERE IS PROBLEMS WITH IT ATM!!! DO NOT USE TILL I SAY ITS SAFE!

Note!: TO ALL SRL MEMBERS: Please use the one in the members section as some of you may know why after looking through this script carefully. ;)

To those who can script - You may find something 'special' about a certain part of this script. Please, do NOT post about it, pm me instead. SRL Members++ - I will tell you what it means. SRL Jr Members– - you have to figure out what this 'special part' does, and you will be rewarded in a 'special' way. Again, please, DO NOT post about it, pm instead (Credits to Runescapian for making this 'special part').

Hello Everyone! This is my second awesome script. What this script does is it Softens Clays! It is short and simple but AWESOME and Flawless! You may wander what's the point of a Clay softener? Well its a GREAT way to make money. Lets say you bought 1000 clay for 91gp each at the GrandExchange which is 91k. If you soften the clay and sell at the GrandExchange it will cost about 186gp each you will get 186k! And since this script is


SUPER fast it will make money QUICK! (h)

SO BUY YOUR CLAYS, USE THIS SCRIPT AND MAKE MONEY!!:D

NOTE! Check below!

When sell "soft" SELL AT Higest PRICE At GrandExchange!!And when buying "hard" clay Buy for LOWEST PRICE–TO KEEP THIS MONEY MAKING THING WORK!
Reason to sell at market price or higher - by Runescapian:)
Sell at market price (or higher) to keep this method of money-making alive! If you sell below market price, the price of wet clay will decrease, killing this way of money-making. At the moment, wet clay usually sells immediately at market price.

Version 3.0 is Out!–PERFECT!-NO JOKES!


Simple Instrucitons:

1. Start your character at the Varrock East Bank.

2. Start with EXACTLY 14 buckets at the TOP of the inventory.

3. Start with also EXACTLY 14 Clays but this time at the Bottom of the inventory since the top 14 spots of the inventory SHOULD be filled with buckets!

4. REMEMBER: Keep all clays that are NOT softened in FIRST bank slot!! OR script WONT work!

And most importantly don't forget to fill in the required information in the script!.

This script is FLAWLESS works PERFECT!:D

Good Luck to everyone!

Dont forget to rate the Thread! And if I make you happy feel free to rep me! ;)



Top Proggies!

By 1313
—- Clay Softener!—-
————————————-
|| Worked For: 2 Hours, 11 Minutes and 53 Seconds||
|| Did 83 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

By Runescapian
————————————-
|| Worked For: 1 Hours, 47 Minutes and 4 Seconds||
|| Did 72 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

Runescapian321

2008-04-19 22:01:26

Looks nice xD I was working on something almost completely identical to this, but didn't finish, now there's no need to lol. I'll have a proggy in a bit, and the script looks very good ;)

kingarabian

2008-04-19 22:02:53

Bad idea dude the soft clay is gonna drop big time….

Runescapian321

2008-04-19 22:07:01

Yeah, put in caps to SELL AT MARKET PRICE++!!

And looks completely flawless in 2 runs so far, nice :)

One suggestion, make it right click and deposit all at once instead of clicking each one?

hobohotel33

2008-04-19 22:12:24

I made a tutorial on this, you wouldn't happen to get this idea from me eh :-)
Thanks for the script i'm gonna test it out.

faster789

2008-04-19 22:36:07

thanks everyone..Wow apparently this was a script that was needed?

@ hobohotel…hmmm wait did you put this idea on script requests? if yes, please tell me because maybe it was you I couldn't find the name..

@Runescapian..
Hmmm …what do u mean "market price" you mean sell at Grandexchange or wat? and also I made it click each one so it will also just store all the things it gets from randoms…

faster789

2008-04-19 22:41:26

Please ReDOWNLOAD VERSION 1!!

Fixed a small error, I forgot to put MakeCompass('N') so it wont get lost

SO REDOWNLOAD VERSION 1.0 if You downloaded the version before this time of post!

andrewrox424

2008-04-19 22:58:32

looks nice, i'll test soon.

Runescapian321

2008-04-19 23:07:21

From: faster789
thanks everyone..Wow apparently this was a script that was needed?

@ hobohotel…hmmm wait did you put this idea on script requests? if yes, please tell me because maybe it was you I couldn't find the name..

@Runescapian..
Hmmm …what do u mean "market price" you mean sell at Grandexchange or wat? and also I made it click each one so it will also just store all the things it gets from randoms…


I mean so people don't go and sell for the lowest price they can (yes, on GE) and then the price will drastically drop. So to keep this a profitable way to make money, everyone must NOT sell for the lowest price.

I was just about to post that it was getting lost :p

faster789

2008-04-19 23:16:37

O ok thanks runescapian…

Please ReDOWNLOAD VERSION 1!!AGAIN

Sorry, Fixed a small error, I forgot to put MMY2 for symbol finding rather than MMCY, so it looks the whole minimap.


SO REDOWNLOAD VERSION 1.0 if You downloaded the version before this time of post!

SHOULD WORK FOREVER NOW!! :D

Runescapian321

2008-04-19 23:21:06

Might wna put why they shoudl sell at market price :p

Here's what you can put -

Sell at market price (or higher) to keep this method of money-making alive! If you sell below market price, the price of wet clay will decrease, killing this way of money-making. At the moment, wet clay usually sells immediately at market price.

It's working flawlessly with the second V 1.0 so far ;)

EDIT: Messed up once, not exactly sure how. It ended up with 14 buckets of water and nothing else at the water fountain.

————————————-
|| Worked For: 12 Minutes and 12 Seconds||
|| Did 8 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

Wow! That's like .75 LPM (loads per minute) :p

EDIT2: It fixed itself (went back to bank and basically restarted without me having to do anything) O_o I don't know if you made it like that or if it was an accident, but great job anyways lol.

faster789

2008-04-19 23:29:06

Hmm ..well if you read the post before the post you posted(im confusing), you'll see there's a third V.1 lol because I put MMCY for some reason when it finds the water symbol when it should be MMY2, so if you wana re-download…because you should expect it sometime not to find the water symbol…;)

Runescapian321

2008-04-19 23:30:39

Edited my post, it fixed itself :p I'll just edit it in the script. That's the only thing you changed right?

EDIT: Didn't find the symbol this time :p

————————————-
|| Worked For: 18 Minutes and 5 Seconds||
|| Did 12 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

faster789

2008-04-19 23:36:51

Lol, thanks buddy for reports. Yep thats the only thing I changed, this is an awesome way of money making eh? Lol, I have 5000 clays getting softened right now:p

Runescapian321

2008-04-19 23:42:17

Very ub3r :) Hopefully I can snatch a bunch of cash up before this gets too popular :p Since I only had 200k (dang Jagex banning my account with almosta mil on it -.-) I only have 1.5k clay. But, according to my calculations. 1 min = 21 clay. Meaning with the 1.3k clay I have left = 62 min. I'll just wake up every time my calculations say I need more clay :p

One suggestion - Make it log out (stay logged out for about 1-2 min?) every 10 min, so you have a 0% chance of getting randoms? Maybe make it optional with a const so people can choose what they want ;)

faster789

2008-04-19 23:43:39

From: Runescapian
Very ub3r :) Hopefully I can snatch a bunch of cash up before this gets too popular :p Since I only had 200k (dang Jagex banning my account with almosta mil on it -.-) I only have 1.5k clay. But, according to my calculations. 1 min = 21 clay. Meaning with the 1.3k clay I have left = 62 min. I'll just wake up every time my calculations say I need more clay :p

One suggestion - Make it log out (stay logged out for about 1-2 min?) every 10 min, so you have a 0% chance of getting randoms? Maybe make it optional with a const so people can choose what they want ;)


Thanks for the idea :)
I'll get working.;)

kingarabian

2008-04-19 23:45:48

MMmm! didnt tara junky mention or made a script for this for members?

Runescapian321

2008-04-19 23:47:13

He did, but his is a bit different. IMHO I prefer this one. (never used his, but I like this method better - it's almost the exact same thing I was making :p)

faster789

2008-04-19 23:49:41

lol yes kingarabian but thats for members only so here it is presenting for SRL junior members!:p

Edit: runescapian beat me to it..lol

andrewrox424

2008-04-20 00:13:49

umm.. okay. It worked for one load. imo maybe it should click the colours? not the coordinate. because sometimes it went crazy and started clicking in fairly random spots. I'll run again later to see if it was a one off thing.

x_²

2008-04-20 00:29:15

ill dl an try it bbl =D

faster789

2008-04-20 00:30:25

try again because I'm pretty sure it shouldnt do that…Although I think I know what you mean…it doesn't sometimes find the bank..which is something I am workiing on..

Edit: expect new version soon!

faster789

2008-04-20 00:50:17

New Version Released V.2!

Fixed Bank Finding! Should work Flawless!

andrewrox424

2008-04-20 00:55:36

ill try. reserved for proggie.

faster789

2008-04-20 00:58:29

Re-downlooad V.2–PERFECT VERSION!!!!!!!!

Runescapian321

2008-04-20 01:20:40

Not perfect yet :p Randoms still get it. They got me. Therefore, I added this

procedure istimeup;
begin
if (TimeFromMark(running) > 600000+random(1400)) then
begin
Logout;
wait(60000);
Loginplayer;
end;
end;

And a Marktime(running) near the beginning of the mainloop. I think that should work, correct me if you see any mistakes :)

PvH

2008-04-20 01:38:20

ima run it now:)
expect a proggy:D

EDIT:
why dont you get the normal clay from bank with the function ALL?
is better/faster than X.
also..
why do you bank by clicking on the soft clay..you can also do that by: bank ALL
is way faster;)

andrewrox424

2008-04-20 01:53:58

quick question… Why can't you make it so it right click banks? Because I find occasionally, it will miss the very last one. Also, that should make it even quicker ;) and why not just right click 'Withdraw All' instead of 'X' then typing 14.

Also, nice to see other people using it as the same time as me :p .

x_²

2008-04-20 02:09:14

—- Clay Softener!—-
————————————-
|| Worked For: 20 Minutes and 31 Seconds||
|| Did 14 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-
Could not find Varrock Road Color!
couldnt find road…
NextPlayer

gets a lot of randoms =(

andrewrox424

2008-04-20 02:22:38

—- Clay Softener!—-
————————————-
|| Worked For: 27 Minutes and 24 Seconds||
|| Did 16 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

Varrock RoadColor = 7239032
Varrock RoadColor = 7239032
couldnt find bank..
NextPlayer

No randoms, but it gets stuck sometimes.
I would HIGHLY recommend you change it to 'store all' and 'withdraw all' because if it lags (like smart always does on my pc) you end up saying '14' and not withdrawing anything. This is going to get found out if there are a bunch of people calling out 14 randomly. Anti randoms would be nice too, just to be on the safe side.

—- Clay Softener!—-
————————————-
|| Worked For: 7 Minutes and 11 Seconds||
|| Did 4 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-
Bought 500 clay and trying again.

————————————-
|| Worked For: 42 Minutes and 30 Seconds||
|| Did 26 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

PvH

2008-04-20 02:58:12

—- Clay Softener!—-
————————————-
|| Worked For: 53 Minutes and 15 Seconds||
|| Did 31 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

i got banking problems..
it doesnt get the normal clay all times, or doesnt bank all soft clay

x_²

2008-04-20 03:19:38

————————————-
|| Worked For: 19 Minutes and 32 Seconds||
|| Did 12 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-



i get a random about every 20mins :s

|| Worked For: 13 Minutes and 18 Seconds||
|| Did 9 Loads! ||
|| ——-MADE BY FASTER 789———-||



well i did 1k works for about 20 mins an gets randoms
also it ends up at the museum sometimes
and it should bank all the clay at one time

faster789

2008-04-20 08:24:39

:D Wow thanks guys! I'm off to someone's wedding when I get back I'll change everything you guys wished for. I'm glad to see this script being used a lot! BTW I'm a SRL-Member NOW WOOOTTT :spot: :spot:

PvH

2008-04-20 08:37:51

congrats on membership:D
you deserved it:)

Runescapian321

2008-04-20 09:07:04

————————————-
|| Worked For: 1 Hours, 9 Minutes and 39 Seconds||
|| Did 48 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

Even with the logout thing I made, it still somehow gets randoms -.- Hopefully I can get my other account back soon (from bannage) so I can rotate.

Btw, gratz on membership, you definitely deserve it :)

andrewrox424

2008-04-20 09:24:04

Wow, grats on membership. And can't wait for new update :D I'll be sure to check for it.

Gabe

2008-04-20 09:47:55

I should test it. Should….

Runescapian321

2008-04-20 10:04:31

I just noticed that you don't have a NextPlayer(true). I would add one after your check (the until) to see if the current player has enough loads done, so that way the next player would go if one player got his loads done ;)

EDIT: You'd also have to loop your softclay procedure then.

King of the Nites

2008-04-20 12:11:53

You should make a dtm for the clay, so you can do if findtm(softclay blah blah) then
mouse(x, y, 5, 5, False)
Chooseoption('ll')

I think that would make it better so it would deposit all of the softclay because sometimes it might lag while clicking all of the clay to deposit them and then it would miss like 1 of the soft clays. BTW CONGRATZ ON MEMBERSHIP!!!! WO0t!!
p.s. you stole my idea…. i was working on this last weekend. wahh. maybe we can compete:p

Runescapian321

2008-04-20 14:05:42

————————————-
|| Worked For: 1 Hours, 47 Minutes and 4 Seconds||
|| Did 72 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

It was at the fountain w/ both buckets of water + clay. Said it couldn't find the buckets. Ah well. Still wroking well :)

EDIT: Heh, this script has been used for 18 1/2 hours 19 hours after its release :)

Only randoms (and once it got lost, went north) have been stopping this ownage script so far. Jagex still hasn't replied to my appeal that I submitted 2 days ago -.- I wnat that char back!

EDIT: —- Clay Softener!—-
————————————-
|| Worked For: 39 Minutes and 33 Seconds||
|| Did 29 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

Went too far west (past the fountain)

EDIT: I edited a few things and it seems to be as perfect and efficient as it can get :)

faster789

2008-04-20 18:20:06

Hey guys, yes I know that banking all at once should be there.. But there is a bug in the Bank.Scar so I just changed it now and added to script..for next version and next version will also include NextPlayer(true) and Logging out each amount of loads you want it to..It will be released sometime today.:)

Edit: Haha, Just found that there's SRL 16 :D bank should work once I release new version

faster789

2008-04-20 22:08:12

Version 2.1 is OUT–SHOULD BE PERFECT :D
1. I have completed the fix to the bank all and withdraw all!
2. Now it will Logout between the number of loads you want it to logout! :D
Fixed Small Bugs!

Please rate thread! and Rep if you are happy with the script! :D

EDIT: HAYHAY89 please re-download!

HayHay89

2008-04-20 22:41:46

kk done trying now

Runescapian321

2008-04-20 22:47:17

———————————–
|| Worked For: 1 Hours, 42 Minutes and 54 Seconds||
|| Did 68 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

With old version. Can't run overnight tonight, parents gna be making sure comp is off :(

faster789

2008-04-20 22:57:54

Lol that sux runescapian..
Here is New Version.
Version 2.2 =Should run forever NO questions Asked :D
Fixed small log out error.

andrewrox424

2008-04-20 23:15:28

okay, i shall run this over today. 1k clay to soften :p

EDIT:
It works fine, until it gets to bank, and banks all your buckets too!

faster789

2008-04-20 23:57:42

hmm Try re-downloading..it works perfect for me..

andrewrox424

2008-04-21 00:18:29

eh.. couldn't find the fountain. but bucket problem fixed after downloading SRL 16. Will try to run again to get a better result.

EDIT:
Occasionally it will miss the click on the bucket to use with clay. and after this, it went on to deposit normal clay, and not withdraw it, walks over to fountain, trys to fill already full buckets, then it goes to bank and withdraws normal clay and walks back to fountain. Seems to auto fix itself.

faster789

2008-04-21 00:30:24

lol yep i noticed that, but also noticed it auto-fixes. :D
BTW
New Version out! 2.3! Might be last release Since I think it's so good, and nothing to add :D

Edit: Andrew are you the person wearing blue armor LOL? cuz someone is running this script and please rate thread :D
Re-download Version 2.3! Fixed finding symbol error.

EDIT: Sorry, redownload v.3.!

Edit: Version 2.4 is out!

Omg everyone! When you sell your soft clays at grandexchange sell for highest price because price is dropping!

andrewrox424

2008-04-21 01:33:22

yepp thats me xD. I forgot to change it to my local world. I sell for highest. and ill try the new version. Hopefully it'll be radd.

EDIT:
The price isn't dropping, its rising!
http://itemdb-rs.runescape.com/viewitem.ws?obj=1761
At the same time as normal clay.
http://itemdb-rs.runescape.com/viewitem.ws?obj=434
So buy normal clay overnight for LOWEST and then sell soft clay for HIGHEST. I bought 1k normal clay for lowest price overnight easily, do it like this to increase our profits, and keep the economy running smoothly.

faster789

2008-04-21 02:12:49

Thats right. :D
I just ran this script for an hour, worked flawless, I manually stopped it and had NO randoms!!!! :D

andrewrox424

2008-04-21 02:50:25

it sometimes misses the withdraw. Maybe you should have it set to colour of the clay? or the symbol of it? That way, it shouldn't miss.

HayHay89

2008-04-21 03:02:33

From: andrewrox424
it sometimes misses the withdraw. Maybe you should have it set to colour of the clay? or the symbol of it? That way, it shouldn't miss.


Umm from i wat i see and i havent tested but maybe if u set more of a waittime
between opening and actually banking it would fix it buts its just a hunch

hope i helped

andrewrox424

2008-04-21 04:14:09

—- Clay Softener!—-
————————————-
|| Worked For: 1 Hours, 16 Minutes and 26 Seconds||
|| Did 44 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

w00t. 1000 clays done and softened :D. Still a bit buggy though.

Runescapian321

2008-04-21 06:57:54

————————————-
|| Worked For: 56 Minutes and 31 Seconds||
|| Did 38 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

Still going, gtg to school.

I'm using a modified version of 2.0. I added right clicking and clicking all for depositing and withdrawing, faster finding when it's done filling buckets/softening clay using DTMs, a randomized co-ord click for when it doesn't find the bank using your thing, and my own thing to sleep. Flawless I think (completely human too, except maybe sometimes it's doing an antiban and doesn't notice the clay is softened, and the co-ord clicking sometimes) And I haven't been getting any randoms recently either xD It might run the whole time I'm at school (6k clay).

the scar noob

2008-04-21 15:57:31

Use dtm's for the clay and soft clay plz;)

Here are the dtm's, place a clay ore and soft clay in your inventory and run the script.

You'll see that it finds both dtm's (clay and soft clay);)

Feel free to use:)

program New;
{.include srl/srl.scar}

var
Clay, SoftClay: integer;

procedure LoadDtms;
begin
Clay := DTMFromString('78DA63CC62626078C18002167646331801694' +
'620FE0F048CB94035F719D000231209A44B806A9E1250930D54F3' +
'86809A64A09AE7F8D50000123D0C64');
SoftClay := DTMFromString('78DA637464626078C28002B20378198C80342' +
'310FF070246909ADB0C6880118904D2DE40352F09A87101AA794F' +
'408D0D116ACC31DD8CAE0600F0460C02');
Writeln('dtm''s loaded.');
end;

procedure FreeDtms;
begin
FreeDTM(Clay);
FreeDTM(SoftClay);
Writeln('dtm''s free''d.');
end;

procedure FindTheDTM(soft: boolean);
var
TheDTM, x, y: integer;
prefix: string;
begin
case soft of
true: begin
TheDTM := SoftClay;
prefix := 'soft';
end;
false: begin
TheDTM := Clay;
prefix := '';
end;
end;
if FindDTM(TheDTM, x, y, mix1, miy1, mix2, miy2) then
begin
Writeln('Found '+prefix+'clay dtm at ('+inttostr(x)+', '+inttostr(y)+').');
MMouse(x, y, 0, 0);
end;
end;

begin
setupsrl;
LoadDtms;
FindTheDTM(true);
Wait(2000);
FindTheDTM(false);
FreeDtms;
end.

-Tsn.

1313

2008-04-21 16:12:41

Worked pretty well, on one character it banked my buckets somehow though..

Please post proggies to the place
you got this script from!
—- Clay Softener!—-
————————————-
|| Worked For: 2 Hours, 11 Minutes and 53 Seconds||
|| Did 83 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

Runescapian321

2008-04-21 17:08:21

————————————-
|| Worked For: 1 Hours, 14 Minutes and 59 Seconds||
|| Did 51 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

I'm still using a modified version of 2.0…. In your newer versions, did you change anything with the FindFountain procedure? It seems like that's the only thing that's messing it up. I'll try adding a failsafe co-ord click in there.

EDIT: Muahaha, just thought of an ownage way to increase efficiency. Sorry, I won't be telling the public it, it's too good. (Maybe if faster wants I can tell him it (or just make it and give him the script) and he can put in the SRL Members section :))

I'll make a proggy of what my modified script does, and then what the non-modded script does, we'll compare :)

EDIT2: Not sure if you fixed it in the later versions, but here's what I saw just happen. It was going to the bank, it did the radialwalk. So now it was standing in front of the bank, but, instead of clicking in the bank, it clicked north, near the museum. Not exactly sure why it happened.

faster789

2008-04-21 17:45:46

Runescapian Rawr! Yay, can you please pm me your idea or script? :D

And thanks for the dtms the scar noob.

Expect an update.

Edit: I've decided to use the DTMs just like a backup so it knows if there is softclay/clay. Because if I use a DTM for the clicking it wont be good as this one as it will almost all the time click the same inventory spot. But, in this clicking, there is a case random which is more undetectable.

Runescapian321

2008-04-21 18:06:17

PM'ed

It's ub3r ownage! Over 1 LPM (load per minute)!

Lookie -

————————————-
|| Worked For: 11 Minutes and 56 Seconds||
|| Did 12 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

EDIT: Btw - 100% Flawless (except for that bank bug that happens once every like…few hours that I posted, or rather edited, about in my last post) and like 90% human efficiency

EDIT: ————————————-
|| Worked For: 1 Hours, 4 Minutes and 51 Seconds||
|| Did 62 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

The walkign bug again… I'm replacing it with a coord click now

faster789

2008-04-21 20:10:25

Omg…clay price is rising everyone buy for lowest price and sell soft clay for highest!

Runescapian321

2008-04-21 20:12:53

Clay rose by 2, soft clay rose by 3 :p

————————————-
|| Worked For: 38 Minutes and 12 Seconds||
|| Did 36 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

Still running this ownage flawless modded script :) (and yes, 100% flawless now, I think I got all the bugs xD, and randoms haven't happened in about 4 hours of running this script. My only fear is Da BanHammer!)

Hows it going editing the one I sent you? When do you think you'll release (to Members)?

Put in first post (or something liek it)

Sell Soft Clay for highest and buy Clay for lowest!!! This way we can maximize our profits (price of clay down, soft clay up = more $$$ for us) . If you buy clay for highest and sell soft clay for lowest (the opposite of what you should), eventually, the prices will come too close together to have a decent profit.

faster789

2008-04-21 21:47:22

Lol thanks runescapian, its not going so good many bugs as I've changed it A LOT, way more failsafes so it will recover if messed up, all makes sense but script has many problems, so fixing now..hopefully release in next 3 hours.

PvH

2008-04-22 02:30:16

i really like your running function…
ima try to make my own too .. lol
maybe try to use dtms to find clay, softclay and things like that
i use it and mine works flawless:)
try it;)

1313

2008-04-22 06:28:26

Ran this while I was at school

————————————-
Please post proggies to the place
you got this script from!
—- Clay Softener!—-
————————————-
|| Worked For: 4 Hours, 17 Minutes and 30 Seconds||
|| Did 165 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

the scar noob

2008-04-22 11:28:23

From: pvh
i really like your running function…
ima try to make my own too .. lol
maybe try to use dtms to find clay, softclay and things like that
i use it and mine works flawless:)
try it;)


What do you think I've posted on the previous page?:p

Oh and btw, faster, call me tsn plz:) Everyone does, and Ilike that instead of "the scar noob", you see?;)

-Tsn.

faster789

2008-04-22 16:49:38

Lol k tsn, and to all members dont use the version I've posted here, go to Members section there is a FLAWLESS version with dtms and sooo many failsafes, it will run flawless till you have no more clay! :D

thebob142

2008-04-22 18:20:43

i dunno if autocolor isn't working but it doesn't bank the soft clay

faster789

2008-04-22 22:25:35

lol try re-starting script and tel me what happens..

thebob142

2008-04-22 22:35:40

still messes up ive tried multiple times and now it takes uber logn to find bank booth

icecap666

2008-04-22 22:47:33

Are your colors and brightness right?

HayHay89

2008-04-22 22:51:09

From: thebob142
still messes up ive tried multiple times and now it takes uber logn to find bank booth


32 bit

and rs low detail and highest brightness

thebob142

2008-04-22 23:00:38

hay hay i knwo this i have it all like that already sorry to say

hopefully 2.4 works better im gonna try a over nighter so about 8 hrs and a half maybe

well just wait and see

faster789

2008-04-23 01:43:29

Version 3.0–Note to all SRL members- use the version in srl members section!

This works flawless.

andrewrox424

2008-04-23 01:49:28

From: faster789
This works flawless.


but not as flawless as the members one :p :fiery:

thebob142

2008-04-23 01:51:55

btw are there any pinball solvers i just got pinball random so yea if not make one possibly?

faster789

2008-04-23 01:53:40

yes, sorry guys not as flawless as the members one, but still even if you're not a member and you catch the "special part" you'll be rewarded the member's version which will run FOREVER.;)

EDIT: that doesnt mean this script is not good this is also Flawless but the members a "lil" bit tweaked.

NiCbaZ

2008-04-23 02:13:50

ohh its a game to find the special part of this script if i do i get the better scriprtozz!!!!!!!!!

no.

your sad, where not all dumb

andrewrox424

2008-04-23 03:24:37

From: faster789
yes, sorry guys not as flawless as the members one, but still even if you're not a member and you catch the "special part" you'll be rewarded the member's version which will run FOREVER.;)

EDIT: that doesnt mean this script is not good this is also Flawless but the members a "lil" bit tweaked.


OH! I know, if i post enough/make a good script i'll become a member! That's it! Wow, thanks faster, you've helped me. Or maybe i could just include anti randoms.. gosh, im smarter than i thought :p

EDIT:
This one is pretty flawless anyway..
—- Clay Softener!—-
————————————-
|| Worked For: 1 Hours, 8 Minutes and 59 Seconds||
|| Did 56 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-
only stuffed up cos i started typing.. at fountain and when it tried to do anti randoms (log out) it wouldn't log back in, because it kept repeating what i said at fountain.. weird. lol.
if someone wants to sell lots of clay on ge, thatd be great :D

Runescapian321

2008-04-23 07:00:51

Clay went up by 2 and soft clay by 0… If you want to continue using this way to money-make sell for highest buy for lowest!

andrewrox424

2008-04-23 07:09:13

—- Clay Softener!—-
————————————-
|| Worked For: 55 Minutes and 26 Seconds||
|| Did 46 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

and working on a two hour proggie. :D

Make that a three hour one :D

—- Clay Softener!—-
————————————-
|| Worked For: 3 Hours, 10 Minutes and 9 Seconds||
|| Did 162 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

1313

2008-04-23 11:47:10

Filling the buckets twice in one run works awesome, it softens clay much faster than it did in the previous version! :D


Please post proggies to the place
you got this script from!
—- Clay Softener!—-
————————————-
|| Worked For: 9 Minutes and 8 Seconds||
|| Did 10 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-
Still runnin' ;)

nobody u kno

2008-04-23 12:29:56

Is this script still working for you guys? I keep getting "Could not find Varrock Road Color"

Runescapian321

2008-04-23 15:48:42

Screen 32 Bit color?

RS Brightness set to max?

SMART unblocked?

Starting in right place?

thebob142

2008-04-23 17:38:40

can you make it multiplayer i likke newer version expect ewhen dtm failed failsafes didn't kick in

btw no progie it was odne ebfore i went ot bad and i shut off comp to early to save it woops

faster789

2008-04-23 17:55:53

@ nicbaz just shut up dude, what you mean how do I think your dumb? I believe that you have to earn the script. And still did you not see the proggies after your post? They're high, so yea..:cool:

thebob142

2008-04-23 18:35:03

————————————-
|| Worked For: 17 Minutes and 5 Seconds||
|| Did 14 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

also i checked up on it to see how many clay i have anyways instead of banking soft clay it banked buckets filled with water. =/ uh something wrong there???

Runescapian321

2008-04-23 21:27:09

————————————-
|| Worked For: 5 Hours, 28 Minutes and 40 Seconds||
|| Did 302 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

OMG! I'm a tard… It woulda went for longer, but being the dunce I am I clicked stop instead of pause…

andrewrox424

2008-04-23 23:25:46

damn! runescapian you beat me yet again! I'm leaving this script running all today. I'll bring you a proggie this afternoon

3d-render

2008-04-24 05:05:07

Hm, It didn't work for me. It did the first load fine, then put the buckets in my bank =/

NiCbaZ

2008-04-24 05:12:05

From: faster789
@ nicbaz just shut up dude, what you mean how do I think your dumb? I believe that you have to earn the script. And still did you not see the proggies after your post? They're high, so yea..:cool:


SORRY I was high:garfield:

andrewrox424

2008-04-24 09:23:17

@ nickbaz, your not funny. so stop trying.
On better and more exciting news, i softened 4k clays today and are ~800k richer :D
Here's all my proggies, because it went to the museum a few times, and the rest it was south of the fountain and couldn't find :confused:
—- Clay Softener!—-
————————————-
|| Worked For: 1 Hours, 19 Minutes and 29 Seconds||
|| Did 62 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-
—- Clay Softener!—-
————————————-
|| Worked For: 20 Minutes and 54 Seconds||
|| Did 18 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-
—- Clay Softener!—-
————————————-
|| Worked For: 1 Hours, 27 Minutes and 58 Seconds||
|| Did 74 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-
—- Clay Softener!—-
————————————-
|| Worked For: 3 Hours, 7 Minutes and 47 Seconds||
|| Did 156 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

faster789

2008-04-24 11:17:35

@Nicbaz :p I see you've applied for Membs, gl on that, apparently you'll make it, I won't vote because I am new and still learning how to vote at situations ;)

@andrewrox
Nice Proggies glad to see you like the script a lot. :D

PvH

2008-04-24 11:33:50

your script is being used a lot..
and mine isnt being used.. lol xD
did you apply to members with this script?
since it looks good:)
i applied to members with my softener too:p

faster789

2008-04-24 11:36:08

;) yep I've seen your app but didn't vote due to my short experience in voting. Lol yep, its being used A LOT and sorry about that. I've actually didn't use the script to apply I used my first script, my varrock east miner, although this is much more flawless than that. :D

PvH

2008-04-24 11:38:57

lol… people use your script since your a member..:)
and members are more trusted, and thats normal:p
you cant help it..
maybe people will use mine when i get in members.. if i get in :p
your script kicks ass :)

faster789

2008-04-24 11:41:57

;) Yep, members rock, which you'll be one soon :D
Thanks.

Runescapian321

2008-04-24 15:27:56

—- Clay Softener!—-
————————————-
|| Worked For: 49 Minutes and 4 Seconds||
|| Did 46 Loads! ||
|| ——-MADE BY FASTER 789———-||
————————————-

Doesn't seem to work as well now… Always fails because it can't find the bank. I'll try putting in another method of bankfinding

Timer

2008-04-24 16:29:52

Faster, I Hate You, You Banned My Main In 30 Mins…

PvH

2008-04-24 16:31:38

timer… are you sure that was by using his script?

Timer

2008-04-24 16:33:10

Yes. 100%.

Runescapian321

2008-04-24 17:05:44

Thought you said you also used N33ss3s' SuperFlax?

Or maybe it was from autoing at an earlier time (bans can be delayed for like a month…)

faster789

2008-04-24 18:28:08

From: Timer
Faster, I Hate You, You Banned My Main In 30 Mins…


:eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:

OMG?!!! your lieing!! how???????? at least 30 people used this no BANS!!!
omg….:duh: :duh: :duh: :google: :google: :eek: :eek:


Edit: yes ruenscapian, is right.I am very sure it wasn't my script as it is fully undetectable. Ruenscapian used the script for SO long and never got banned -_-. Dont blame me, must be another script..

Timer

2008-04-24 19:04:39

Not Really… :(

And U Use Coord Clicking, I Noticed… :mad:

Runescapian321

2008-04-24 19:14:10

Why didn't you change it lol :p

I told you there was coord clicking and you might want to look over it before using…

+ The coord clicking makes it run longer. I notice half the time some lag or whatever causes it to miss a bank or something, but since it coord clicks it doesn't notice that it failed, and the script continues running.

faster789

2008-04-24 19:36:17

:confused: lol yes i've used coord clicking for about 20 hours now and now ban..trust me its not this script and the coord clicking has cases of 5, and has random…

Runescapian321

2008-04-24 19:43:42

Umm, nvm…I just got perm banned. Damnit I had 4m on that acc…

faster789

2008-04-24 19:45:36

:duh: scapian please tell me ur jkin… was it for macroing? and was it because of this script?


NOTE TO EVERYONE: Please do not use this script till I say its safe! Thanks for your co-operation.

jser

2008-04-24 19:48:31

hi, it does the first load, mixes the clay with buckets of water, banks gets more clay then it hovers over my inventory. any help?

faster789

2008-04-24 19:49:55

do Not Use Script Underconstruction..

Timer

2008-04-24 19:51:13

Faster, You SOB…


EVERY ONE STOP USING THE SCRIPT NOW UNLESS YOU WANT A BANNED ACCOUNT!!!

Faster, for your own sake, remove the script till you get it un-bannable, its for your own good. if you leave it, every one will be banned, and you will get a bad reputation, and then no one will even use a Infinate% Not Bannable Script Of Yours…

Runescapian321

2008-04-24 19:59:17

From: faster789
:duh: scapian please tell me ur jkin… was it for macroing? and was it because of this script?


NOTE TO EVERYONE: Please do not use this script till I say its safe! Thanks for your co-operation.


Yes for macroing, yes b/c of this script. I haven't done anything but use this one on this account for about the past month and half (before you released this script it was just idle).

*sigh* Gl making it more undetectable :)

PvH

2008-04-25 02:06:31

faster… why did you use co-ordclicking?
i mean.. you can also go to the bank by clicking a bank dtm,
thats what i do.. and my script can run 4-ever, if you have enough clay and dont get unsolvable randoms..
co-ordclicking is bannable… no matter if you do it with random
you should really make a ddtm/bank-dtm/bank symbol clicking with random..
good luck;)

andrewrox424

2008-04-25 05:16:32

zomfg.. I TOLD YOU TO CHANGE IT!! Gosh, but no one listens to the Junior Member that tested your script for 24hrs+. :( I am awaiting the ban. Good idea, Pm me and I'll test the updated version.

xcvxcv2

2008-04-29 20:28:18

i made a vid on this so i guess enjoy

<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/afn7_-bp1Wg"> </param> <embed src="http://www.youtube.com/v/afn7_-bp1Wg" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

idk if that wirked if not plz help this is the thingy

<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/afn7_-bp1Wg"> </param> <embed src="http://www.youtube.com/v/afn7_-bp1Wg" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

link is here
http://www.youtube.com/watch?v=afn7_-bp1Wg

:) :)

andrewrox424

2008-05-04 00:17:50

DO NOT I REPEAT DO NOT USE THIS SCRIPT. Bannage is certain. I am certain this script got my account banned. I'm currently appealing. But wait until he has fixed it so it doesn't use co-ordinates.

faster789

2008-05-05 22:42:29

LOL u got banned too?

andrewrox424

2008-05-21 19:46:36

nah, i just thought id rant :p and my accounts still locked!!! argh 10blk marks.. tut tut tut.

oglokes

2008-08-25 01:40:34

Hey, idk if its outdated but did u ever fix the script? been trying to find some good Bucket Buyers and a working softener. , found one bucket buyer but wouldn't work :S found a bunch of clay makers but they all had errors/were outdated/no antiban thingy.. :S I really gotta start learning how to script :O

faster789

2008-08-25 12:19:59

From: oglokes
Hey, idk if its outdated but did u ever fix the script? been trying to find some good Bucket Buyers and a working softener. , found one bucket buyer but wouldn't work :S found a bunch of clay makers but they all had errors/were outdated/no antiban thingy.. :S I really gotta start learning how to script :O


Its OUTDATED LONG TIME.. 3 months now.. :f: