SRL Archive - RS3 Outdated / Broken Scripts

Soft Clay Farmer 2.02
Gets approx. 130 soft clay per hour. Thats about 400k per 10 hours!

New Version 2.02! (10/7/07)
2.01 had a few consistency bugs, and I think I fixed them. I just tested this version and got a 12 hour test with a great rate, 8 players, still had 6 running at the end.

• Fixed the "no longer finding clay rocks" deactivate bug where it would disable the player for no reason.
• Fixed the "could not find clay rocks" error that was happening a lot… It might still happen, but I think it will be MUCH more rare.

What Soft Clay Farmer Does

If style set to 'both'
• Starts at Falador East Bank and runs to Rimmington Mine.
• Mines a full inventory of clay.
• Walks back to Fally, and stops at the well.
• Uses your buckets to get water and soften the clay.
• Banks the soft clay and repeats.
If style set to 'wet'
• Starts at Falador East Bank and withdraws a full inventory of clay.
• Runs to the well.
• Uses your buckets to get water and soften the clay.
• Banks the soft clay and repeats.
If style set to 'mine'
• Starts at Falador East Bank and runs to Rimmington Mine.
• Mines a full inventory of clay.
• Banks the clay and repeats.

Features

• Anti-Randoms
• Anti-Ban
• Multi-Player
• RadialWalking with the use of DDTM's.
• Fully Auto-Colored
• Has NO level requirements! Although this is the case, DO NOT use this script on level 3's with default clothes. Get your characters some combat levels using an auto-fighter, make them look cool!
• Radial Off Road Walking - Modified version of RadialRoadWalk used to walk near but off a road in any direction. Used in my ForkToMine procedure while looking for the mining site symbol.
• Can start at three different locations!
• Can optionally only mine clay, only soften clay, or do both at the same time.
• If your pick breaks, the script will now run back to the bank, deposit your broken pick, and withdraw a new usable pick. Will equip if your attack level is high enough.

Setting it up

1) Setting up your script options

• Set the number of buckets you want to use (I use two, using more than one is nice because the well fills buckets at the same time).
• Set the number of loads to do before switching characters.
• Set up all of your players in the DeclarePlayers procedure.

2) Setting up your players

• Place your buckets in your first inventory slots.
Example: You are using two buckets, place them in inventory slots 1 and 2. Your Inventory looks like this: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
• Place your pick in the inventory slot after the buckets (If you are not wielding it).
• If you are just mining, you don't need to have buckets in your inventory. If you are just softening you don't need to have a pickaxe on you.
• Put all of your players in the western-most bank stall in falador east bank.

3) Starting the script

• Stabilize your colors first! You do this by logging on any player and then logging out. (If you do not stabilize your colors, your first player will NOT find the fork south of fally).
• After stabilizing your colors, start the script when logged out.

4) Post a progress report!

Known Issues

• None!

Best Proggy by [-Jesus-]:

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O           Soft Clay Farmer 2.0
O                by Fizzi
O==========================================
O Worked For : 14 Hours, 32 Minutes and 28 Seconds
O Loads : 88
O Banked  2388 Clay
O Avoided gas 3 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

My best proggy with the newest version (151 soft clay per hour):

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O           Soft Clay Farmer 2.01          
O                by Fizzi                  
O==========================================
O Worked For : 16 Hours, 34 Minutes and 57 Seconds
O Loads : 97
O Banked 2502 Soft Clay
O Avoided gas 6 times
O Broke 1 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O               Error Report               
O==========================================
O ****** : Could not find clay rocks.
O ****** : Could not find clay rocks.
O ****** : Still Running!
O ****** : Could not find clay rocks.
O ****** : No longer finding clay rocks
O ****** : Could not find clay rocks.
O ****** : No longer finding clay rocks
O ****** : Found water symbol, but not the well.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

History:
Version 1.0 - 7/17/07
Version 1.01 - 7/19/07
-Fixed the failing color finding (I hope)
-Improved Off Road walking increments.
Version 1.1 - 7/27/07
-Revamped virtually everything
-Walking improved
-Mining procedure changed
-Added option to only mine, only wet, or do both (like normal)!
-Can now start player at three different locations: mine, well, and bank!
-Added more failsafes
-Hopefully fixed all the errors with coloring fally
-Improved fork DDTMs for more accurate fork clicking
-Added SRL Stats support
Version 1.11 - 7/28/07
-Bug Fixes
Version 1.13 - 7/28/07
-Bug Fixes
Version 2.0 - 8/20/07
-Made to work with SRL 4.0 Beta
-Walking improved.
-Better well finding.
-Added my own findpick and findgas procedures. I think they work pretty well. Also added counters for them and added them to report. Please tell me if my findpick fails.
-If your pick breaks, the script will now run back to the bank, deposit your broken pick, and withdraw a new usable pick. Will equip if your attack level is high enough.
-Much improved stability!
Version 2.01 - 9/26/07
-Fixed the memory error with gas finding.
-Fixed broken Pick DTM's (New Pickaxe procedure should work better now)
Now uses DDTM's the CORRECT way. This actually doesn't change much, it's just cleaner and it uses DDTM's to their fullest.
-Mining procedure COMPLETELY changed. I'm actually very proud of my mining procedure now, I hope it works as well for everyone else as it does for me. What this means for you - Faster mining, less downtime when someone else is mining(will break out of wait loop even if someone steals your rock), will no longer log out and leave players at the mine to be picked back up later.
-Better FindFight handling. Yeah… this part of the code kinda sucked. Although this isn't actually tested, coming back from running away should actually work now.
-My favorite part of the new version: Automatic starting location detection. If you set .Loc = 'auto', the script will automatically detect where you are starting. Make sure, however, that your character is actually AT the clay rocks, or IN the bank, or NEXT to the well, don't be somewhere random in the mine, or to the north of the bank or anything like that. This is awesome, now you no longer need to go through the DeclarePlayers procedure and change bank to mine, or mine to bank, etc. Thanks to Nielsie for his awesome include =).

Please post proggies. Enjoy.

wooot first post :)
ill test out and give u a proggy

Haven't tried it yet, will do when i get time out from STUDYING SCAR - 2 months so far! :eek:
Good Luck in the future
exppo

Hey everyone, I have updated AutoColor.scar yet again. With the Fally Bar smelter competition and with this script now, the FindFallyRoadColor function is getting a lot more use, and more extreme colors are being found that it's failing to find.

I loosened the limits a little bit more on all the RGB criteria to try to compensate for this.

This file will be included in the next release of SRL. Until then, go ahead and download this version and replace the one in your /Includes/SRL/SRL/Core/ directory.

The older versions of this function should still work a large majority of the time, so another alternative is to simply change worlds or reload your current world if the Fally road autocoloring fails, but I know how tedious this can be, and how disruptive it is for long script runs, so go ahead and update if you can.

Im using this now and its working great since you updated. Question? How come you did not get srl member with all the votes in your favor? They think your mob or what? Your script is great anyways and thaks for it.

From: tarajunky
Hey everyone, I have updated AutoColor.scar yet again. With the Fally Bar smelter competition and with this script now, the FindFallyRoadColor function is getting a lot more use, and more extreme colors are being found that it's failing to find.

I loosened the limits a little bit more on all the RGB criteria to try to compensate for this.

This file will be included in the next release of SRL. Until then, go ahead and download this version and replace the one in your /Includes/SRL/SRL/Core/ directory.

The older versions of this function should still work a large majority of the time, so another alternative is to simply change worlds or reload your current world if the Fally road autocoloring fails, but I know how tedious this can be, and how disruptive it is for long script runs, so go ahead and update if you can.

Thank you very much for this Tarajunky. I have updated the AutoColor.scar in my post to this one as well.

From: justkidding
Im using this now and its working great since you updated. Question? How come you did not get srl member with all the votes in your favor? They think your mob or what? Your script is great anyways and thaks for it.

Thank you for testing it, I plan on releasing one more stability update and then it should stay the same for a while.

Reguarding my member application… I haven't been told anything yet, but it's supposed to take 7-14 days right? So it's not like it's past the due date or anything. Just waiting patiently atm :).

Fizzi, Whats the vote count now, you should be quite close to getting in, no?

From: 3garrett3
Fizzi, Whats the vote count now, you should be quite close to getting in, no?

18-2

Jeez, you must be getting in soon.

Hey, just had a quick test, until my machine messed up.

Here's the report.

Soft Clay Farmer 1.12
O by Fizzi
O==========================================
O Worked For : 1 Hours, 7 Minutes, and 38 Seconds
O Loads : 4
O Banked 103 Soft Clay
O Banked 0 Clay

Sorry its not longer, but every little helps.:p
Works great, easy to use, as i have been around for along time
Hopefully I'll Have a longer test done when i can sort my machine out from all this lag.

Looks nice, I'll enjoy using it!

For me it is having trouble finding the road color. I tried moving it one furter to the west but still no luck. Any advice on how to fix this one?

From: richk1693
For me it is having trouble finding the road color. I tried moving it one furter to the west but still no luck. Any advice on how to fix this one?

Replace the autocolor scar file in srl with the one provided.

Im going to test this out, if i can, on my lvl 28 while I sleep (prob going to sleep like 5 hrs, get up to check, then sleep like 3 or 4 more hrs) I'll post a proggy if all goes well:)

The road colour left of fally bank isn't working correctly



^^


[(I'm going to wait untill tomorrow to see wat you/some other knowledgable person says)(going to use Wizzup's ess miner untill then)]

From: justkidding
Replace the autocolor scar file in srl with the one provided.

d'oh!~ Didn't see that post last night (was like 1 am so I was rly tired):duh:


—–

I think there might be a bug in your script, or maybe it's something w/ me but:

After turning all your clay to Softy Clay the script tells you it can't fid the bank so it sits there a min or so then logs out :(

Here's a preview of what to expect from 1.14:

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 1.14
O by Fizzi
O==========================================
O Worked For : 18 Hours, 4 Minutes, and 13 Seconds
O Loads : 118
O Banked 1877 Soft Clay
O Avoided gas 1 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O ******* : Attempted to mine clay 15 times and failed.
O ******* : Failed to leave Fally
O ******* : Failed to find mine
O ******* : Attempted to mine clay 15 times and failed.
O ******* : Failed to find mine
O ******* : Attempted to mine clay 15 times and failed.
O ******* : Attempted to mine clay 15 times and failed.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

I'm still playing with my own findpick and findgas functions, and I still have to find a way to make it find the mine 100% of the time, i'd say it's about 95% right now. Besides that… I fixed the well finding completely (I think), and so many other things.

The script is slower at the moment because my FindGas procedure slows it down, i'll figure something out to speed it up again =P.

woot!, hurry up w/ that update ;)

Right now im tierd and i wanna sleep but tomorrow im gonna DL this and try it out and post a report.

++ Goodnight ++

+ Bookmarked

<3

I was doing the mine/wet/bank method it does everything up to the well, yes it wets all the clay but then doesnt go back to the bank, it simply logs out

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O Pure4lyf22 : Failed to find bank.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Failed to find bank.

Tried it a 2nd time it gets just before the falador open gates and starts clicking where he stands, i think it selects the wrong road color

From: Sc00by22
Tried it a 2nd time it gets just before the falador open gates and starts clicking where he stands, i think it selects the wrong road color

Hmm, what it's supposed to do is walk down on the fally road until it finds the regular road color, then once it does find the regular road color (once it's shown on the mini-map), it should click one more time on the fally road color than switch. It sounds to me like it's getting stuck inside the walking south loop, which means it isn't finding the road color, can you tell me what is in your debug box?

Regarding the bank problem… Does it log out instantly after finishing softening the clay, or does it wait a bit then log out? If it's instantly after then that is very strange. The script is supposed to start walking back to the bank, and if for some reason it's not finding the bank, after… I think 1 min, don't have access to the script right now, of not finding the bank, it will give you the error you got. If you got that error instantly after the softening was completed, that is very strange.

I'll look into it when I get home from work. If you could post your debug screens, that would be great (Make sure you pause it before it does the report otherwise you'll lose it)

Here is a report:

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 1.12
O by Fizzi
O==========================================
O Worked For : 11 Hours, 32 Minutes, and 36 Seconds
O Loads : 52
O Banked 1342 Soft Clay
O Banked 0 Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

It worked great! The only reason it stopped was that runescape updated the game, so it told me to reload the page. Also almost everyone of my players was still active ( one was still at the mine…)

From: Sc00by22
I was doing the mine/wet/bank method it does everything up to the well, yes it wets all the clay but then doesnt go back to the bank, it simply logs out

Sc00by, thanks for repeating EXACTLY what I had posted on here already like 3 -5 posts up… gf

& It probably wont work atm anyways since the new runescape update.

From: Macho Man67
Here is a report:

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 1.12
O by Fizzi
O==========================================
O Worked For : 11 Hours, 32 Minutes, and 36 Seconds
O Loads : 52
O Banked 1342 Soft Clay
O Banked 0 Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

It worked great! The only reason it stopped was that runescape updated the game, so it told me to reload the page. Also almost everyone of my players was still active ( one was still at the mine…)

Wow! Very nice proggy. Thank you, and I'm putting this on the first post. How many players did you use by the way?

From: [-jesus-]
Sc00by, thanks for repeating EXACTLY what I had posted on here already like 3 -5 posts up… gf

& It probably wont work atm anyways since the new runescape update.

Ummm… you reported that you couldn't leave the bank? He reported that he was able to leave the bank, reach the well, and soften the clay but was unable to return to the bank.

From: Fizzi
Wow! Very nice proggy. Thank you, and I'm putting this on the first post. How many players did you use by the way?



Ummm… you reported that you couldn't leave the bank? He reported that he was able to leave the bank, reach the well, and soften the clay but was unable to return to the bank.

From: [-jesus-]
I think there might be a bug in your script, or maybe it's something w/ me but:

After turning all your clay to Softy Clay the script tells you it can't fid the bank so it sits there a min or so then logs out :(

^^^^I posted about both of those things.

did you forget about the rs update?dont think any script will work without the srl4.or am i wrong.

He might have had that proggy from like yesterday, & just got around to posting it now. :stirthepot:

it just logs in and nothing more…

From: warrockownz
it just logs in and nothing more…

There was a recent update to RS, most scripts will not work at the moment. Wait til SRL is updated and the script should work again.

Failed when compiling
Line 79: [Error] (15812:20): String error in script C:\Documents and Settings\Owner\Bureaublad\Soft Clay Farmer 1.13.scar
Line 79: [Error] (15812:20): Syntax error in script C:\Documents and Settings\Owner\Bureaublad\Soft Clay Farmer 1.13.scar

line 79:

Players[0].Nick := ''; //Pick lowercase letters

Yes i'm a noob in scar, but what do i need to fill in there?

Ty

From: test0607
line 79:

Players[0].Nick := ''; //Pick lowercase letters

Yes i'm a noob in scar, but what do i need to fill in there?

Ty

dll SRL and for the nick it 3-4 letters of the username your using

Thank you Hugo, but also, the script won't work right now cause SRL needs to be updated.

when will the scripts start working again?

From: pk4lyfe37
when will the scripts start working again?

Whenever SRL 4.0 comes out… it's being developed atm so PLEASE don't post anywhere else about the scripts not working. Just check the purple (or some1 said it's black on their comp) banner that scrolls across the top of the page. Once that says SRL 4.0 is out go download it & try the script for real.

This would be totally awesome if it had perfect KYAB walking ;)

From: solarwind
This would be totally awesome if it had perfect KYAB walking ;)

Haha, I actually just got KYAB members, and I'm definetly planning on adding KYAB walking, I need to figure it out first though (Working on that now ;) )

Although, my walking is pretty good… the updated walking in 1.14 is almost flawless… well… was. Hopefully it'll still be good after SRL 4

Does it work width srl 4? I havn't tested yet, but i'm intresting…

From: test0607
Does it work width srl 4? I havn't tested yet, but i'm intresting…

I do have a version that is working, but I'm still playing around with it a bit. Expect it to be released soon. The current version on page 1 will not work.

I'll be looking forward to it

Soft Clay Farmer 2.0 Released!!

See first post for updates.

Awesome! Thanks Fizzi, I'll give it a try.

Edit:
Quick Proggy (Wet only)
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 28 Minutes and 2 Seconds
O Loads : 6
O Banked 150 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO


Double Edit:
Proggy (Both)
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 3 Hours, 16 Minutes and 36 Seconds
O Loads : 13
O Banked 337 Soft Clay
O Avoided gas 1 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

(Note: none of my guys ever got lost on this one)

From: Light
Awesome! Thanks Fizzi, I'll give it a try.

Edit:
Quick Proggy (Wet only)
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 28 Minutes and 2 Seconds
O Loads : 6
O Banked 150 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO


Double Edit:
Proggy (Both)
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 3 Hours, 16 Minutes and 36 Seconds
O Loads : 13
O Banked 337 Soft Clay
O Avoided gas 1 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

(Note: none of my guys ever got lost on this one)

Very nice! Great to hear. Only one thing, did you notice anything slow about the script? Or were you just using bronze picks? Because that rate is kinda slow.

Here's a proggy from me, all these characters have like 1-10 mining and bronze pickaxes, it's my new army :). The proggy still owns:

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O           Soft Clay Farmer 2.0
O                by Fizzi
O==========================================
O Worked For : 5 Hours, 44 Minutes and 1 Seconds
O Loads : 28
O Banked 722 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O               Error Report
O==========================================
O ****** : Still Running!
O ****** : Still Running!
O ****** : Still Running!
O ****** : Still Running!
O ****** : Still Running!
O ****** : Still Running!
O ****** : Still Running!
O ****** : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Awesome script. Finally found a clay miner I think I'll like. Trying in out in a few, I'll post a proggy.

EDIT: Error message..

Line 53: [Error] (15382:1): Duplicate identifier 'x' in script C:\Program Files\SCAR 3.11\Scripts\Soft Clay Farmer 2.0.scar

Don't have a clue about this one. I'll redownload it and update everything again, then try it out.

EDIT..again.: Yeah. I redownloaded the script and the Includes and SRL stuff, but the script won't even compile correctly. It's getting the same error. What's goin on?

From: CatastrophicDesire
Awesome script. Finally found a clay miner I think I'll like. Trying in out in a few, I'll post a proggy.

EDIT: Error message..

Line 53: [Error] (15382:1): Duplicate identifier 'x' in script C:\Program Files\SCAR 3.11\Scripts\Soft Clay Farmer 2.0.scar

Don't have a clue about this one. I'll redownload it and update everything again, then try it out.

EDIT..again.: Yeah. I redownloaded the script and the Includes and SRL stuff, but the script won't even compile correctly. It's getting the same error. What's goin on?

Are you using SRL 4.0 beta and NOTHING else? Because one of the changes in SRL 4.0 beta was that they removed the global variables x and y, and so I had to add my own x and y to the script. This error that you're getting will happen if you already have an x and y declared when my script declares its x and y.

This means that one of your includes is probably declaring x and y. I would suggest deleting the entire includes folder, then downloading SRL 4.0 beta (Don't use the file -> download srl feature in SCAR). And put 4.0 beta in the correct place. If that still doesn't work, try removing the line "x, y : integer;" which should be around line 52. Hope this helps.

Okay, I reinstalled the new includes and stuff manually and the script started working, so thanks for the help.

But now, whenever the script starts up, sometimes it won't log the characters in automatically. It will click the "existing user" button, but then won't type in the username and password. It only does that about 50% of the time.

Other than this, when it does log in, the script works just fine. Why won't it type the username and pass?

Yes, that other one was with low lvl army and bronze picks (mostly).

This one is all lvl 10+ mining with iron picks.

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 4 Hours, 1 Minutes and 50 Seconds
O Loads : 19
O Banked 493 Soft Clay
O Avoided gas 14 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

(about 122 an hour)

Wow, nice proggy! After this proggy there were 3 that errored out.

I'm going to run this about 3-4 hrs. Then i'm switching to wizzup?'s ess miner. I'll post a proggie then (I want to finally run this script 100% w/ the softening & all).


Edit: Can't get SRL 4 BETA to work yet so i'll have to wait. :(

Admins, SRL Scripters Cup to Fizzi's direction!!

Note: DTMs for colored pickaxes are currently broken. I will release an update which will fix this problem, and other things.

All that this means is that the procedure to get a new pickaxe out of the bank if yours breaks won`t work. If youd like, you can change it yourselves.

how much is soft clay worth each

Woot! I set up SRL correctly now, while im half asleep @ 3:47 AM too :p

I'll run this now, if all goes well you'll have a proggy in place of this txt in a few hrs. & If you could post where in the script the procedure for finding pickaxe after 1 breaks is, i'll try & fix it :D I'm going to bed instead of looking right now.

Really nice script!
My progrress report:

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 2 Hours, 34 Minutes and 7 Seconds
O Loads : 17
O Banked 461 Clay
O Avoided gas 1 times
O Broke 1 pickaxes.

Thx man!

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O           Soft Clay Farmer 2.0
O                by Fizzi
O==========================================
O Worked For : 4 Hours, 44 Minutes and 31 Seconds
O Loads : 28
O Banked 781 Clay
O Avoided gas 1 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 4 Randoms Report     |
|      [url]www.srl-forums.com[/url]      |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs         :         2 |
| Talks            :         1 |
| Old Men          :         1 |
| Boxes Solved     :         2 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

Woot^ I'm going to turn it back on now (it's paused atm) Plan on running it atleast like… 10-15 more hrs :eek:

EDIT: I am using bronze picks atm. I'm, going to go make some steel or mith picaxes for them now.

My updated proggie:D :

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O           Soft Clay Farmer 2.0
O                by Fizzi
O==========================================
O Worked For : 14 Hours, 32 Minutes and 28 Seconds
O Loads : 88
O Banked  2388 Clay
O Avoided gas 3 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

I was using Iron & Steel pickaxes


Also: When I start the script it says:

Line 22: [Hint] (12299:1): Variable 'ORECOLOR1' never used in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/skill/Mining.scar
Line 22: [Hint] (12299:1): Variable 'ORECOLOR2' never used in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/skill/Mining.scar
Line 22: [Hint] (12299:1): Variable 'ORECOLOR3' never used in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/skill/Mining.scar
Line 22: [Hint] (12299:1): Variable 'ORECOLOR' never used in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/skill/Mining.scar

It still starts up fine & works, but that just comes up but doesn't alter the script at all.

And:

[Runtime Error] : Exception: Out of system resources in line 1015 in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/Core/AntiRandoms/AntiRandoms.scar

That comes up every once in awhile & makes the script stop working.

Very nice proggy jesus - First paged it. Both those errors you showed me are with SRL 4 Beta, not my script. They will hopefully be fixed when the release version comes out.

From: Fizzi
Very nice proggy jesus - First paged it. Both those errors you showed me are with SRL 4 Beta, not my script. They will hopefully be fixed when the release version comes out.

Ok. Nice to know;)

Fizzi, sometimes when I attempt to run the script, it will work, but sometimes when it switches characters it doesn't type the username and pass in…..it just clicks the buttons and doesn't type anything.

Any help?

Wow, It looks like you improved it alot from when I first used the script! I'll get you a proggie within the next couple of days….

[OffTopic] I can't really find any buyers for soft clay….Anyone have a suggestion? [OffTopic]

From: CatastrophicDesire
Fizzi, sometimes when I attempt to run the script, it will work, but sometimes when it switches characters it doesn't type the username and pass in…..it just clicks the buttons and doesn't type anything.

Any help?

I would say try redownloading SRL, and make sure it's set up/installed correctly.

From: Macho Man67
Wow, It looks like you improved it alot from when I first used the script! I'll get you a proggie within the next couple of days….

[OffTopic] I can't really find any buyers for soft clay….Anyone have a suggestion? [OffTopic]

Use the forums?

tryed to run it did as you said im only Mining

but i got errors

Successfully compiled
Line 22: [Hint] (12299:1): Variable 'ORECOLOR1' never used in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/skill/Mining.scar
Line 22: [Hint] (12299:1): Variable 'ORECOLOR2' never used in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/skill/Mining.scar
Line 22: [Hint] (12299:1): Variable 'ORECOLOR3' never used in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/skill/Mining.scar
Line 22: [Hint] (12299:1): Variable 'ORECOLOR' never used in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/skill/Mining.scar
SRL Compiled in 203 msec
Found Compass
Pick head colors… 1451826 1847873 1847873 1846845 2111562
Falador RoadColor = 6386811
Could not find Road Color!
Could not find Road Color!
Could not find Road Color!
Could not find Road Color!
Could not find Road Color!
Could not find Road Color!
Successfully executed

im starting it the west bank of falador. it goes to the west road but it dont click to climb over ?

Are you at the highest angle possible, 32 bit color true & have conpass facing north?

Awesome Program :). I'll post a Proggie when I get the time to test.

yep jesus and low detail

Idk then lol. Try redownloading it then. & make sure you are in the most western bank booth ect.

edit!

i found what i was doing wrong (late shifts :\)

edit

@ Jesus - working lol

will post proggy later on :D

Late shifts? Explain :p

Here's my Proggie :).

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 1 Hours, 12 Minutes and 40 Seconds
O Loads : 8
O Banked 222 Clay
O Attached 1 pick heads
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

My Account had 62 Mining and I was mining with a Steel Pick.
I was only mining and banking the Clay Ore.

Problems:
When I told it to do both Mine, Wet and Bank the Clay it almost finished the load when it said it couldn't find the bank. It was passing the Mining Guild.

Either than that, the Program is awesome. I'll try to do the 'both' thing again. I'll also test the just 'wet' clay option and post proggie.

Thank you for the Script as well :). Anti-Random and such is excellent.

Edit - It wet the Clay for me perfectly as well :).

ok well i got home and heres the report

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 1 Hours, 1 Minutes and 59 Seconds
O Loads : 7
O Banked 194 Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O *** : Could not find clay rocks.
O *** : Still Running!
O *** : Still Running!
O *** : Still Running!
O *** : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Could not find clay rocks.

[Runtime Error] : divide by Zero in line 36 in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/Core/Mouse.scar

so i logged in on player one and it was right next to the clay rocks but nvm

i then logged in the the other 4 players and they was still all in the bank on level 1 mining so the script did not login the next player?

im using IE do i need to use the official runescape client thing rather than IE?

=EDIT=

tryed it again this i watched and it logged out then all it did was just keep clicking log in when it types nothing in everything in the script is set correctly is anyone else having this problem?

I get these lines,
Failed when compiling
Line 249: [Error] (1108:11): Unknown identifier 'ScanExactMinimapD' in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/Core/Color.scar
on first attempt…

and
Failed when compiling
Line 164: [Error] (164:4): Unknown identifier 'InAbstractBox' in script C:\Program Files\SCAR 3.11\includes\SRL\SRL\Core\Color.scar
on second attempt…

I'm no scripter so can someone please tell me what is going wrong?

:::::EDIT:::::
Just in case this helps, I have it set to mine and buckets to 0, Common sense tells me that buckets don't matter but I'll post it anyway :P And I also downloaded the includes (PH.scar)
Should i delete this file because i read that you should have pure srl4 and scar 3.11

From: chombie
I get these lines,
Failed when compiling
Line 249: [Error] (1108:11): Unknown identifier 'ScanExactMinimapD' in script C:\Program Files\SCAR 3.11\includes\SRL/SRL/Core/Color.scar
on first attempt…

and
Failed when compiling
Line 164: [Error] (164:4): Unknown identifier 'InAbstractBox' in script C:\Program Files\SCAR 3.11\includes\SRL\SRL\Core\Color.scar
on second attempt…

I'm no scripter so can someone please tell me what is going wrong?

:::::EDIT:::::
Just in case this helps, I have it set to mine and buckets to 0, Common sense tells me that buckets don't matter but I'll post it anyway :P And I also downloaded the includes (PH.scar)
Should i delete this file because i read that you should have pure srl4 and scar 3.11

You DO need SRL 4 Beta for this to work. go here to learn how to install it correctly. Do everything it says & don't ask questions <—-

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 5 Hours, 50 Minutes and 57 Seconds
O Loads : 37
O Banked 943 Soft Clay
O Avoided gas 1 times
O Broke 1 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O *** : Attempted to mine clay 10 times and failed
O *** : Attempted to mine clay 10 times and failed
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO


Great rate and longevity. And yes, I ran this on only two accounts!

OK great script i have gotten 799 soft clay from it but the error i got when i woke up was ERROR: Can not locate well. MY charactor ended up on the other side of the chain mail shop but with that fixed this thing seems flawless to me.

Multi-ing doesn't work on this one. Freezez when logging in to next player. All the time.

Looks ultra cool!

Thanks for all the positive feedback, for those having errors, wait until the new scar/srl come out, it'll be more stable. Right now there's problems in srl 4 beta so it might not necessarilly be my script.

From: jez
Multi-ing doesn't work on this one. Freezez when logging in to next player. All the time.

Umm, I think you're the only one with that problem. Don't post it as if it's a problem with the script. I'll look into it though, but I haven't heard of anyone with this problem. If anyone else is having this problem please post.

Deffintly have to use this on my new char,
just got him to lvl 25 combat,
ill send a proggy after an overnight trial
looks good though

same happens with me Fizzi it dont log in the next player :(

From: inkd
same happens with me Fizzi it dont log in the next player :(

I think the answer to your problem might be found here: http://www.villavu.com/forum/showthread.php?t=16195 . I would suggest just downloading firefox, because I hear that also solves the problem.

yay! thanks fizzi.. changed the login.scar file :D

ill set up my players and let it run over night :D

-Edit-

yay it logged em in :D

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 4 Hours, 34 Minutes and 17 Seconds
O Loads : 27
O Banked 704 Clay
O Avoided gas 1 times
O Broke 1 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O *** : Could not find clay rocks.
O *** : Failed to find road from mine.
O *** : HP low
O *** : HP low
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Failed to find road from mine.

last player had his pickaxe in the bank??? i had it equipped tho so idk? the last two players it says hp low maybe a random came? but none died :D

the other player the axe broke but was still in invent so thats good :)

overall very nice script Fizzi ill carry on using this.

thanks,

my report, bronze pics
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 9 Hours, 56 Minutes and 6 Seconds
O Loads : 53
O Banked 1267 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O : Failed to find south of fally fork.
O : Failed to find south of fally fork.
O : Still Running!
O : Failed to find bank.
O : Still Running!
O : Failed to find bank.
O : Failed to find bank.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Very nice script, good job :)

Hey Fizzi your script is excellent.

I had it mine and wet for a while, and then I had it just mine for a while.

And I wrote up another script just for softening the clay. It's still not perfect, but it works pretty well. You need to buy at least 14 buckets from the general store in fally and start over near the west bank.

I'm not going to post it elsewhere on the forums yet, but I thought some people here might be interested in it.

Great job, Fizzi!

From: tarajunky
Hey Fizzi your script is excellent.

I had it mine and wet for a while, and then I had it just mine for a while.

And I wrote up another script just for softening the clay. It's still not perfect, but it works pretty well. You need to buy at least 14 buckets from the general store in fally and start over near the west bank.

I'm not going to post it elsewhere on the forums yet, but I thought some people here might be interested in it.

Great job, Fizzi!

Wow, thank you tarajunky =). Oh, and, my script can do softening only. Set the string to 'wet'.

Note to everyone:
Currently the file that is version 2.01 is on my old computer at home, and my parents disconnected it from the internet… They are burning my scripts folder onto a CD and I will be getting it sometime next week, then I plan on updating the mining procedure (it's gonna be awesome), and then I will put up version 2.01, it will probably be the last update in a while, unless I find that there are very common problems or if runescape updates something.

From: inkd
yay! thanks fizzi.. changed the login.scar file :D

ill set up my players and let it run over night :D

-Edit-

yay it logged em in :D

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 4 Hours, 34 Minutes and 17 Seconds
O Loads : 27
O Banked 704 Clay
O Avoided gas 1 times
O Broke 1 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O *** : Could not find clay rocks.
O *** : Failed to find road from mine.
O *** : HP low
O *** : HP low
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Failed to find road from mine.

last player had his pickaxe in the bank??? i had it equipped tho so idk? the last two players it says hp low maybe a random came? but none died :D

the other player the axe broke but was still in invent so thats good :)

overall very nice script Fizzi ill carry on using this.

thanks,

Yeah… the DTM's are messed up at the moment for getting pickaxes. There might have also been other problems in the retrieval script. I fixed all the problem in 2.01 though, so I'll release the fix when I get the file.

yay hope you post it soon :D

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O           Soft Clay Farmer 2.0
O                by Fizzi
O==========================================
O Worked For : 5 Hours, 59 Minutes and 52 Seconds
O Loads : 37
O Banked 1018 Clay
O Avoided gas 1 times
O Broke 1 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O               Error Report
O==========================================
O --- : HP low
O --- : Still Running!
O --- : Could not find clay rocks.
O --- : HP low
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

HP low
NextPlayer
---
ERROR. RuneScape has been updated. Script Terminated.
Successfully executed

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 4 |
| Fights : 1 |
| Talks : 2 |
| Old Men : 1 |
| No Sandwiches : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

didnt solve the Sandwiche lady tho because i logged in and she was still there

Don't have a proggy because my internet went out overnight so text.scar ran out of memory from trying to log in so scar had to close, but some things I noticed:
It saw the gas, and did the writeln('Gas Found') but didn't stop mining the clay, after pick broke it kept trying to mine the clay… you might want a procedure to check if pick is broken after gas is found, and if so switch players. A little later I walked in and saw it trying to find the south of fally fork (to go to the mine) while still at the mine. Hope this helps a little. I'll run it again and get the proggy this time.

From: mickaliscious
Don't have a proggy because my internet went out overnight so text.scar ran out of memory from trying to log in so scar had to close, but some things I noticed:
It saw the gas, and did the writeln('Gas Found') but didn't stop mining the clay, after pick broke it kept trying to mine the clay… you might want a procedure to check if pick is broken after gas is found, and if so switch players. A little later I walked in and saw it trying to find the south of fally fork (to go to the mine) while still at the mine. Hope this helps a little. I'll run it again and get the proggy this time.

Thanks for the bug report anyway =). Regarding the gas thing, I'm changing the mining procedure entirely next patch, so hopefully the gas thing won't be a problem anymore. Although, if you let it go on a little longer, it will realize the pick is broken after it fails to mine the rock 15 times currently. I understand that this is very bot-like. The new version will address this.

The other problem you reported could be one of two things.
1) The script did something weird, and "found" the mine fork and then started to look for the fally fork even though it wasn't in the right position, I have failsafes for this, so the player will logout… it's very difficult to make long walks completely flawless, although I think mine is pretty close.
2) It was a newly logged on player that you had maybe set the starting location as bank even though he was starting at the mine? I wouldn't know, just a possibility.

Works great but werid error came up and I wasnt low on HP

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 1 Hours, 33 Minutes and 34 Seconds
O Loads : 3
O Banked 74 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O ***** : HP low
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

HP low

From: Emagdnim
Works great but werid error came up and I wasnt low on HP

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 1 Hours, 33 Minutes and 34 Seconds
O Loads : 3
O Banked 74 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O ***** : HP low
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

HP low

The script that checks to see if you have low HP, results as true if it can't access the stats window to check your current health. This happens when say, the bank screen is up, and there are others. I will be fixing this in the next patch.

verry nice script

From: marre
verry nice script

Stop spamming dude.. You have wrote to like 5 threads "nice script" "works great!!!" and I bet you haven't tested all of them!

oh btw 100. post :D

Good script, but for some reason after about 3-5 hours, I get a Runtime Error saying Scar's memory is full. Then it directs me to this line saying its the problem.

setlength(Points, length(Points)+1);

Anyway, that is from this function here:

function FindMultiMovementColorTol(TStop, Frequency : Integer; ColorMoving : Integer;
                      x1, y1, x2, y2 : Integer; Tolerance : Integer; MCPixels : Integer) : boolean;
var
  TSearch, PCount, CCount, MCCount, slength, sheight, i, k : Integer;
  Movement : Boolean;
begin
  slength := (x2 - x1);
  sheight := (y2 - y1);
  PCount := 0; CCount := 0;
  for i := 0 to sheight do
  begin
    if (i = 0) or ((i mod 2) = 0) then
    begin
      for k := 0 to (slength/2) do
      begin
        setlength(Points, length(Points)+1);
        Points[PCount].x := (x1 + (2*k));
        Points[PCount].y := (y1 + i);
        PCount := (PCount + 1);
      end;
    end else
    begin
      if((slength mod 2) = 0) then
      begin
        for k := 0 to ((slength/2) - 1) do
        begin
          setlength(Points, length(Points)+1);
          Points[PCount].x := (x1 + 1 + (2*k));
          Points[PCount].y := (y1 + i);
          PCount := PCount + 1;
        end;
      end else
      begin
        for k := 0 to (slength/2) do
        begin
          setlength(Points, length(Points)+1);
          Points[PCount].x := (x1 + 1 + (2*k));
          Points[PCount].y := (y1 + i);
          PCount := (PCount + 1);
        end;
      end;
    end;
  end;
  MarkTime(TSearch);
  repeat
    for i := 0 to (PCount - 1) do
    begin
      setlength(Points[i].Color, length(Points[i].Color)+1);
      Points[i].Color[CCount] := GetColor(Points[i].x, Points[i].y);
    end;
    CCount := CCount + 1;
    Wait(Frequency);
  until(TimeFromMark(TSearch) > TStop);
  for i := 0 to (PCount - 1) do
  begin
    Movement := False;
    for k := 0 to (CCount - 2) do
    begin
      if(Points[i].Color[k] <> Points[i].Color[k+1]) then Movement := True;
    end;
    if Movement then
    begin
      for k := 0 to (CCount - 1) do
      begin
        if(SimilarColors(Points[i].Color[k], ColorMoving, Tolerance)) then MCCount := MCCount + 1;
      end;
    end;
  end;
  if(MCCount >= MCPixels) then Result := True
  else Result := False;
end;

Any clue why it would be doing this?

From: Opal Tasty
Good script, but for some reason after about 3-5 hours, I get a Runtime Error saying Scar's memory is full. Then it directs me to this line saying its the problem.

setlength(Points, length(Points)+1);

Anyway, that is from this function here:

function FindMultiMovementColorTol(TStop, Frequency : Integer; ColorMoving : Integer;
                      x1, y1, x2, y2 : Integer; Tolerance : Integer; MCPixels : Integer) : boolean;
var
  TSearch, PCount, CCount, MCCount, slength, sheight, i, k : Integer;
  Movement : Boolean;
begin
  slength := (x2 - x1);
  sheight := (y2 - y1);
  PCount := 0; CCount := 0;
  for i := 0 to sheight do
  begin
    if (i = 0) or ((i mod 2) = 0) then
    begin
      for k := 0 to (slength/2) do
      begin
        setlength(Points, length(Points)+1);
        Points[PCount].x := (x1 + (2*k));
        Points[PCount].y := (y1 + i);
        PCount := (PCount + 1);
      end;
    end else
    begin
      if((slength mod 2) = 0) then
      begin
        for k := 0 to ((slength/2) - 1) do
        begin
          setlength(Points, length(Points)+1);
          Points[PCount].x := (x1 + 1 + (2*k));
          Points[PCount].y := (y1 + i);
          PCount := PCount + 1;
        end;
      end else
      begin
        for k := 0 to (slength/2) do
        begin
          setlength(Points, length(Points)+1);
          Points[PCount].x := (x1 + 1 + (2*k));
          Points[PCount].y := (y1 + i);
          PCount := (PCount + 1);
        end;
      end;
    end;
  end;
  MarkTime(TSearch);
  repeat
    for i := 0 to (PCount - 1) do
    begin
      setlength(Points[i].Color, length(Points[i].Color)+1);
      Points[i].Color[CCount] := GetColor(Points[i].x, Points[i].y);
    end;
    CCount := CCount + 1;
    Wait(Frequency);
  until(TimeFromMark(TSearch) > TStop);
  for i := 0 to (PCount - 1) do
  begin
    Movement := False;
    for k := 0 to (CCount - 2) do
    begin
      if(Points[i].Color[k] <> Points[i].Color[k+1]) then Movement := True;
    end;
    if Movement then
    begin
      for k := 0 to (CCount - 1) do
      begin
        if(SimilarColors(Points[i].Color[k], ColorMoving, Tolerance)) then MCCount := MCCount + 1;
      end;
    end;
  end;
  if(MCCount >= MCPixels) then Result := True
  else Result := False;
end;

Any clue why it would be doing this?

Yes I do… and it's fixed in 2.01… which is very nearly completed… except i'm still debugging some retarded errors.

Oh ok, ty. Is it possible to get a quick fix for it? Or do we need to wait for 2.1? Thanks!

From: Opal Tasty
Oh ok, ty. Is it possible to get a quick fix for it? Or do we need to wait for 2.1? Thanks!

You can try this:

Go to line 1073 or just search for it, it says:

if FizSolveGas(x, y) then GasCount := GasCount + 1;

Overwrite it with this line:

if GasCheck(x, y-30) then FTWait(80);

This should work as a temporary fix… if it messes up the mining procedure (which is possible), then post again and i'll come up with something else =P.

Yes it worked. No it didn't mess up mining and heres a proggy of last night.

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.0
O by Fizzi
O==========================================
O Worked For : 9 Hours, 25 Minutes and 35 Seconds
O Loads : 34
O Banked 881 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Expect a longer one when i get home too!

Heres my proggy i ran while i went to a party and came back and it had stopped …anyways heres some of my progggys…

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O           Soft Clay Farmer 2.0
O                by Fizzi
O==========================================
O Worked For : 3 Hours, 33 Minutes and 34 Seconds
O Loads : 10
O Banked 250 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O               Error Report
O==========================================
O Username : Failed to find bank.
O Username : Failed to find bank.
O Username : Failed to find bank.
O Username : Found water symbol, but not the well.
O Username : Failed to find bank.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O           Soft Clay Farmer 2.0
O                by Fizzi
O==========================================
O Worked For : 3 Hours, 28 Minutes and 58 Seconds
O Loads : 10
O Banked 250 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O               Error Report
O==========================================
O Username : Failed to find bank.
O Username : Failed to find bank.
O Username : HP low
O Username : Failed to find bank.
O Username : Failed to find bank.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Failed to find bank.
NextPlayer
Successfully executed

 OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O           Soft Clay Farmer 2.0
O                by Fizzi
O==========================================
O Worked For : 4 Hours, 15 Minutes and 18 Seconds
O Loads : 14
O Banked 349 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O               Error Report
O==========================================
O Username : Failed to find bank.
O Username : Failed to find bank.
O Username : Failed to find bank.
O Username : Attempted to mine clay 10 times and failed
O Username : Failed to find bank.
O Username : Failed to find bank.
O Username : Attempted to mine clay 10 times and failed
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Soft Clay Farmer 2.01 Released!!

Well it's been a while since the last update… Hopefully this one will be nearly flawless for everyone… although it's so hard to beat all the kinks out of it. It works great for me, overnight and on with no problems with 8 players.

There were so many little changes and big changes in this version… I'll list the ones I remember.

• Fixed the memory error with gas finding.
• Fixed broken Pick DTM's (New Pickaxe procedure should work better now)
• Now uses DDTM's the CORRECT way. This actually doesn't change much, it's just cleaner and it uses DDTM's to their fullest.
• Mining procedure COMPLETELY changed. I'm actually very proud of my mining procedure now, I hope it works as well for everyone else as it does for me. What this means for you - Faster mining, less downtime when someone else is mining(will break out of wait loop even if someone steals your rock), will no longer log out and leave players at the mine to be picked back up later.
• Better FindFight handling. Yeah… this part of the code kinda sucked. Although this isn't actually tested, coming back from running away should actually work now.
• My favorite part of the new version: Automatic starting location detection. If you set .Loc = 'auto', the script will automatically detect where you are starting. Make sure, however, that your character is actually AT the clay rocks, or IN the bank, or NEXT to the well, don't be somewhere random in the mine, or to the north of the bank or anything like that. This is awesome, now you no longer need to go through the DeclarePlayers procedure and change bank to mine, or mine to bank, etc. Thanks to Nielsie for his awesome include =).

omg ty for this next version i will test overnight tonight and post proggie 2marro!

I ran overnight then checked in morning and set it up again for during the day and stopped it when i got back.I forgot to post the one from this morning and i can't find it now i got this during the day:

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 7 Hours, 52 Minutes and 41 Seconds
O Loads : 40
O Banked 1039 Soft Clay
O Avoided gas 3 times
O Broke 1 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O *********** : Something went wrong while softening the clay. - Dunno what went wrong logged out at well with 2 softeed clay and 24 normal clay.
O ********** : Could not find clay rocks. - Went to center of mine but didn't find the clay rocks
O ************ : Still Running! - Still running when i got back
O *********** : Failed to find road from mine. - Random (some dragon in a class) that i get alot when mining with scripts
O ********** : Could not find clay rocks. - Went to center of mine but didn't find the clay rocks
O *********** : Failed to find fally. - Was just outside Fally with full load of clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

I love this script but my guys seem to get to mine and just stand in the center not finding the clay rocks alot. I happened to one of my guys when i was trying it first time, about two overnight and two during the day today. Apart from that Its amazing :):)

From: brave
I ran overnight then checked in morning and set it up again for during the day and stopped it when i got back.I forgot to post the one from this morning and i can't find it now i got this during the day:

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 7 Hours, 52 Minutes and 41 Seconds
O Loads : 40
O Banked 1039 Soft Clay
O Avoided gas 3 times
O Broke 1 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O *********** : Something went wrong while softening the clay. - Dunno what went wrong logged out at well with 2 softeed clay and 24 normal clay.
O ********** : Could not find clay rocks. - Went to center of mine but didn't find the clay rocks
O ************ : Still Running! - Still running when i got back
O *********** : Failed to find road from mine. - Random (some dragon in a class) that i get alot when mining with scripts
O ********** : Could not find clay rocks. - Went to center of mine but didn't find the clay rocks
O *********** : Failed to find fally. - Was just outside Fally with full load of clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

I love this script but my guys seem to get to mine and just stand in the center not finding the clay rocks alot. I happened to one of my guys when i was trying it first time, about two overnight and two during the day today. Apart from that Its amazing :):)

Yes, I get these errors sometimes as well.

Could not find clay rocks.: I'm fairly certain this one happens because FindStoneColor fails, because it does fail sometimes, I've seen it. I may either try to make a better auto-coloring procedure for stone color, or I may try to find the rocks in another way.

Failed to find fally.: I have seen this one as well… this one bothers me a lot as I have no idea why it happens, the only explanation I can give is that it fails to find FallyRoadColor. This is unlikely though, because FindFallyRoadColor is very sensitive, maybe it's finding the wrong color. It often does find the color, and in the script at a certain spot I do a CountColor check to make sure there is a lot of the color before I actually declare it as the FallyColor. I'll look into this, though i'm not sure how much I can do about it.

No longer finding clay rocks: Usually means you got a random while mining, nothing I can do about this, if this is happening though, and you log on and you're next to the rocks, report it to me.

Something went wrong while softening the clay.: I've never gotten this error personally, lol. It triggers when it enters the same loop too many times in a row. So, if it continuously enters the "Finds Well and Empty Bucket and attemps to fill it" loop without entering the "Finds filled bucket and hard clay and softens it" loop, then this error will trigger. I put it in there for randoms and weird problems, dunno why you got it lol.

i would post a proggie but I have a slow pc and this script is really laggy for me (im fixing to speed it up I just got it) and ill post a proggie when im able to run it

More Proggies for you :)

I got this overnight

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 4 Hours, 2 Minutes and 7 Seconds
O Loads : 21
O Banked 545 Soft Clay
O Avoided gas 6 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O : Could not find clay rocks. - In center of mine
O : No longer finding clay rocks - Was at clay rock with almost full load mined ??
O : Still Running! - Mime
O : Could not find clay rocks. - In center of mine
O : No longer finding clay rocks - Was at clay rock with half a load mined ??
O : No longer finding clay rocks - Was at clay rock with half a load mined ??
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

During Day

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 6 Hours, 26 Minutes and 18 Seconds
O Loads : 36
O Banked 859 Soft Clay
O Avoided gas 1 times
O Broke 3 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O : Could not find clay rocks. -
O : Could not find clay rocks. - Other than the reasons it says
O : Could not find clay rocks. - I don't know why any of
O : Could not find clay rocks. - these stopped cause i forgot
O : No longer finding clay rocks - to write it down before I
O : No longer finding clay rocks - started the script again
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

I think I might get some more miners soon.

Edit: Another overnight one

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 5 Hours, 45 Minutes and 21 Seconds
O Loads : 30
O Banked 779 Soft Clay
O Avoided gas 3 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O : No longer finding clay rocks - At the clay rocks with most of a load mined
O : No longer finding clay rocks most - At clay rocks with most of a load mined
O : No longer finding clay rocks - At clay rocks with half a load mined
O : Could not find clay rocks. - In the middle of mine
O : Could not find clay rocks. - In the middle of mine
O : No longer finding clay rocks - In the middle of mine
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

some of my guys seem to be logging out at clay rocks with around half or more of a load mined any idea why ?

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 22 Hours, 27 Minutes and 31 Seconds
O Loads : 92
O Banked 2383 Soft Clay
O Avoided gas 3 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Thats with like 21 people. I had to stop it so I could post this. But I'll get you a longer one tommorrow.

How much is soft clay worth? And is it kind of hard to sell?

From: Opal Tasty
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 22 Hours, 27 Minutes and 31 Seconds
O Loads : 92
O Banked 2383 Soft Clay
O Avoided gas 3 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Thats with like 21 people. I had to stop it so I could post this. But I'll get you a longer one tommorrow.

How much is soft clay worth? And is it kind of hard to sell?

Awesome, almost 24 hours :). Soft clay is worth 300-375. If you have a members character, make a post in the construction section advertising your clay, if not, do a search on the forums for soft clay, there are usually people buying.

I released version 2.02 which mainly just addresses two problems which were causing the script to not last as long as it should.

One of these had to do with the error "No longer finding clay rocks" - this is now fixed. You should no longer get this message unless there actually aren't any clay rocks.

The other was the error "Could not find clay rocks", this one might still happen, but I believe it will be extremely rare.

Meh. I like the older version w/ my 14 hr proggy still:p

From: [-jesus-]
Meh. I like the older version w/ my 14 hr proggy still:p

I doubt that version could still run that long =P. Well… maybe it could, but the new version would run longer and faster, probably.

I'm using 2.01 and so far i'v got like 20k soft clay in like 2 weeks leaving it on overnight checking in morning and leaving it on till i get back :) roughly 800-900 per night and 700-1200 for day depending on when i get in

I just have a quick question. Which script would you guys choose, this one or the iron miner by masterkilla (sp?). I've tried both and the iron is definatley faster but thats probably because the script is also stopping by the well to get the water. Should I add another bucket to make this faster or go back to mining iron?

i have tried this script it is not bad at all

From: Kaizetsu
I just have a quick question. Which script would you guys choose, this one or the iron miner by masterkilla (sp?). I've tried both and the iron is definatley faster but thats probably because the script is also stopping by the well to get the water. Should I add another bucket to make this faster or go back to mining iron?

If you want to make money i'd say this script as soft clay sells for around 300ea and iron sells for around 100 ea. If you want exp and some money you'd be better with iron because clay doesn't give much mining exp.

Sorry for Double post but I'm using V 2.02 now and I get alot less of the no longer finding/could not find clay rocks (great work) but now i get quite alot of my guys ending up in port sarim :confused:

From: brave
Sorry for Double post but I'm using V 2.02 now and I get alot less of the no longer finding/could not find clay rocks (great work) but now i get quite alot of my guys ending up in port sarim :confused:

<sigh> yeah…. that was the trade-off I guess. I dunno. I mean, I'm starting to get a little discouraged. I make a version of the script that, for me, runs perfectly for like 2 nights. I'm talking like, 8 hours running with 7/8 players still running. Then, after those 2 nights, 6 hours, all players have some stupid random ass error that i should have already fixed, this happens every time I update the script… I'm just starting to give up I guess, it just seems like i'll never be able to make the script flawless. For me… kind of a horrible feeling.

For the port sarim issue (or getting lost walking in general), try using landmarks (mostly symbols) as barriers. For example when you see the beer symbol of port sarim, you know you are too far east, so head west.

From: Fizzi
<sigh> yeah…. that was the trade-off I guess. I dunno. I mean, I'm starting to get a little discouraged. I make a version of the script that, for me, runs perfectly for like 2 nights. I'm talking like, 8 hours running with 7/8 players still running. Then, after those 2 nights, 6 hours, all players have some stupid random ass error that i should have already fixed, this happens every time I update the script… I'm just starting to give up I guess, it just seems like i'll never be able to make the script flawless. For me… kind of a horrible feeling.

Don't give up its a realy nice script and it works great. A few people getting stuck everynight is fine cause i use 12 accs and i'm making a couple hundred k per day for spending a couple of minutes starting and stopping a script and moving a few players to mines/well and anything that can do that is pretty damn good.

Edit Heres a Error free Proggie

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 7 Hours, 43 Minutes and 32 Seconds
O Loads : 44
O Banked 1076 Soft Clay
O Avoided gas 8 times
O Broke 3 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O : Still Running!
O : Still Running!
O : Still Running!
O : Still Running!
O : Still Running!
O : Still Running!
O : Still Running!
O : Still Running!
O : Still Running!
O : Still Running!
O : Still Running!
O : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Unfortunatley it stopped cause Runescape got updated

From: Boreas
For the port sarim issue (or getting lost walking in general), try using landmarks (mostly symbols) as barriers. For example when you see the beer symbol of port sarim, you know you are too far east, so head west.

It's not a walking issue, my walking gets to the mining symbol approx. 99% of the time. The auto-coloring of the rocks sometimes fails in rimmington mine, and the way i get to the clay rocks is by radial walking a few times in the general east direction using the rock color. However… since the coloring sometimes fails, the radial walking, in turn, fails. To counter this, I have the character walk "blindly" in the east direction, looking for the clay rock color on the MS after each click and attempting to find the rock color again. If it fails to find the clay color, it will continue walking east… to port sarim. This was a last ditch effort to prevent the character from completely stopping, and it does work sometimes.

I do, however… have a better idea to get to the clay rocks, but I need some help. I think what I will do is make a DDTM which will have about 5 subpoints or so of the white "border" of rimmington mine, with the main point being where the rocks should be, approximately. I am bad at auto-coloring and am currently short on time though. Is there already a function that auto-colors the MM white lines? If not, I was wondering if anyone could write one.

I will do a FindDTMRotated for this DDTM and I think this should work. If anyone has comments/suggestions, I would love to hear them.

Try ACA for a quick wall autocolor.

Also try limiting how far it goes blindly east.

heres a very good very long proggie i got (the first time i'v left on more than a day)

I used 12 guys all with 30-45 mining (from mining clay lol) and using 2 buckets


OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 29 Hours, 13 Minutes and 44 Seconds
O Loads : 156
O Banked 4002 Soft Clay
O Attached 1 pick heads
O Avoided gas 35 times
O Broke 3 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O *********** : No longer finding clay rocks
O ********** : Still Running!
O ************ : Failed to find road from mine.
O *********** : No longer finding clay rocks
O ********** : Could not find clay rocks.
O *********** : Still Running!
O *********** : Still Running!
O ********* : No longer finding clay rocks
O ************ : Failed to find south of fally fork.
O ************ : Failed to find road from mine.
O ********* : No longer finding clay rocks
O ********** : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

I should have another over or around 24 hours tommorow.

It work really great
Worked for: 3 hours 40 minutes and 1 sec
Banked 440 soft clay, sorry iam so noob i dont know how to post this proggy like below brave has :D

Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 7 Hours, 18 Minutes and 18 Seconds
O Loads : 37
O Banked 959 Soft Clay
O Avoided gas 1 times

So pretty nicely works for me :)

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 9 Hours, 39 Minutes and 0 Seconds
O Loads : 73
O Banked 1725 Soft Clay
O Avoided gas 10 times
O Broke 1 pickaxes.

5/7 true, could have gone longer, but had to watch mythbusters :p

works very good :)
But my internet work bad so .. i get a lot of errors just becose of lagg

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 1 Hours, 22 Minutes and 23 Seconds
O Loads : 9
O Banked 189 Clay
O Broke 2 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O : Still Running!
O : No longer finding clay rocks
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
Falador RoadColor = 6387834

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 1 Hours, 14 Minutes and 54 Seconds
O Loads : 15
O Banked 360 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O : Still Running!
O : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
NextPlayer
Successfully executed

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 45 Minutes and 39 Seconds
O Loads : 7
O Banked 168 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O : Still Running!
O : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
Falador RoadColor = 6321016
RoadColor = 6119269
Falador RoadColor = 6321016
Falador RoadColor = 6123894
Successfully executed
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 2 Hours, 59 Minutes and 1 Seconds
O Loads : 18
O Banked 431 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O : Found water symbol, but not the well.
O : Still Running!
O : Still Running!
O : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
NextPlayer

all of u noobs please black out your name with an * or everyone will report you

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 9 Hours, 53 Minutes and 0 Seconds
O Loads : 80
O Banked 2177 Clay
O Avoided gas 2 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O : Still Running!
O : Could not find clay rocks.
O : Still Running!
O : Still Running!
O : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
Falador RoadColor = 6848899
Could not find Road Color!
Successfully executed

thanks so much for this script. made alot of money

Monstras edit out your username!!! They can trace the accounts IP and ban all the accounts on that IP

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 7 Hours, 40 Minutes and 31 Seconds
O Loads : 39
O Banked 931 Soft Clay
O Avoided gas 23 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O Here was my username : No longer finding clay rocks
O Here was my username : Failed to find fally.
O Here was my username : Unrecognized starting location
O Here was my username : Still Running!
O Here was my username : Still Running!
O Here was my username : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

cool now i can get my char up in mining


edit: heres my proggy a good one only one char and about 50 more clay because i hade to stop the script for a few mins

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 1 Hours, 51 Minutes and 3 Seconds
O Loads : 10
O Banked 250 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 6 Hours, 36 Minutes and 24 Seconds
O Loads : 33
O Banked 837 Soft Clay
O Avoided gas 2 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O ``````` : Could not find clay rocks.
O `````````: Still Running!
O ````````` : Still Running!
O ````````: Still Running!
O ```````` : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

player 1 was lost in port sarim? other then that GREAT script. each player did 5 loads before switching.

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 7 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

Worked For : 9 Hours, 34 Minutes and 42 Seconds
O Loads : 72
O Banked 970 Soft Clay
O Avoided gas 5 times
O Broke 34 pickaxes.

I think best script i have ever run at the moment :D Always i get good results with this script :)

excellent script
but 1 question why would you mine clay, cause it doesn't give good exp or money

From: supersain
excellent script
but 1 question why would you mine clay, cause it doesn't give good exp or money

I am agree with u about earning good exp, ya it does slowly, but still i rather use slower way but almost flawless and a great script, than faster way which can blow up at the night when u are already at sleep and u get a like 2 hour proggy than mine runs like 10 hour straight or smt, and about money actually u can sell soft clay starting 200-400 each or smt like that, i sold like 5.7 soft clay for 1.6 mil ~280 each. :)

i was mining
when i mined like 20 clays, it stopped mining and logged out
i open scar and it said
"No longer finding clay rocks"

From: supersain
i was mining
when i mined like 20 clays, it stopped mining and logged out
i open scar and it said
"No longer finding clay rocks"

Well do u get that? If it did worked for me and for many other people very well, the problem is in you, not the script because there is no other way :D well it may bugged or smt nothing isnt perfect or 100% sure, i wonder maybe u didnt stabilized your colours or u have the 2.00 version which had this bug, anyway u have to figure it our yourself at the end anyway, READ then u will get the answer :D Okay aint gonna post anymore to many quotes in one page, mods gonna toast me :stirthepot:
:D
Should only edit one big proggy if i'll manage tonight :D

i am running it on virtual machine
is that the cause of problem?

which version of this script is the best

another, great proggy three char used in in two cicles

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 14 Hours, 21 Minutes and 35 Seconds
O Loads : 81
O Banked 1901 Soft Clay
O Banked 24 Clay
O Avoided gas 51 times
O Broke 1 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 7 Hours, 56 Minutes and 36 Seconds
O Loads : 45
O Banked 1122 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O @@@ : Still Running!
O f@@@ : Still Running!
O @@@r : Still Running!
O @@@ : Still Running!
O @@@: Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 14 Hours, 45 Minutes and 36 Seconds
O Loads : 85
O Banked 2021 Soft Clay
O Avoided gas 33 times
O Broke 1 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O *** : Failed to find bank.
O *** : Still Running!
O *** : Failed to find bank.
O *** : No longer finding clay rocks
O *** : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

My personal record

it ran for 22 mins then ran into port sara thats my best i only ran it twice

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 11 Hours, 33 Minutes and 30 Seconds
O Loads : 30
O Banked 776 Soft Clay
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

My another proggie
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 8 Hours, 50 Minutes and 27 Seconds
O Loads : 50
O Banked 1230 Soft Clay
O Avoided gas 15 times
O Broke 1 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O **** : Still Running!
O **** : Still Running!
O **** : Could not find clay rocks.
O **** : Could not find clay rocks.
O **** : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 17 |
| Talks : 2 |
| Sandwiches : 1 |
| Capn Hand : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/

since this still seems to be working, i'm going to give it a try. any special instructions needed?

First, I got this:

Successfully compiled
Line 868: [Hint] (13574:53): Variable '' never used in script C:\Program Files\SCAR 3.12d\includes\SRL/SRL/Core/Users.scar
Line 1478: [Hint] (14184:41): Variable '' never used in script C:\Program Files\SCAR 3.12d\includes\SRL/SRL/Core/Users.scar
Line 1489: [Hint] (14195:45): Variable '' never used in script C:\Program Files\SCAR 3.12d\includes\SRL/SRL/Core/Users.scar
Line 1500: [Hint] (14206:45): Variable '' never used in script C:\Program Files\SCAR 3.12d\includes\SRL/SRL/Core/Users.scar
Line 1511: [Hint] (14217:41): Variable '' never used in script C:\Program Files\SCAR 3.12d\includes\SRL/SRL/Core/Users.scar
Line 1522: [Hint] (14228:48): Variable '' never used in script C:\Program Files\SCAR 3.12d\includes\SRL/SRL/Core/Users.scar
Line 1537: [Hint] (14243:1): Variable '' never used in script C:\Program Files\SCAR 3.12d\includes\SRL/SRL/Core/Users.scar
Line 1568: [Hint] (14274:1): Variable '' never used in script C:\Program Files\SCAR 3.12d\includes\SRL/SRL/Core/Users.scar
Line 1595: [Hint] (14301:1): Variable '' never used in script C:\Program Files\SCAR 3.12d\includes\SRL/SRL/Core/Users.scar
Line 1622: [Hint] (14328:1): Variable '' never used in script C:\Program Files\SCAR 3.12d\includes\SRL/SRL/Core/Users.scar
SRL Compiled in 9204 msec
[Runtime Error] : Out Of Range in line 112 in script C:\Users\Mohammed Nagi\Desktop\Soft Clay Farmer 2.02.scar

so then i changed this my number of players from 3, back to eight: HowManyPlayers := 8;

so then the script continued,but then i got this:
[Runtime Error] : Math error in line 740 in script C:\Program Files\SCAR 3.12d\includes\SRL/SRL/Core/Text.scar

I am using scar 3.12d, srl 4(updated)

Thank you, and please tell me what I need to do to fix this problem.

Does anyone know what's happened to Fizzi? His activity dropped down to 7% :confused:

Sounds Cool. I will try it out. This will be very useful for my Script I'm making (it's a secret).

OH MY GOODNESS!

Wonderful job mate. This script ran for 4 hours and mined 650 soft clay. Keep up the wonderful work!

O==========================================
O Worked For : 14 Hours, 2 Minutes and 48 Seconds
O Loads : 92
O Banked 1408 Soft Clay
O Banked 920 Clay
O Attached 2 pick heads
O Avoided gas 60 times
O Broke 1 pickaxes.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Still working with 3 accounts out of 5

Looks very nice, I will try it out later. Thanks dude:D

From: [-jesus-]
Does anyone know what's happened to Fizzi? His activity dropped down to 7% :confused:

College/WoW happened to Fizzi =P. Maybe some day i'll come back and rewrite this script. I've been taking a java course and I realized how sloppy some things are done in my code.

For the time being, if anyone wants to try to fix up the current problems with my script, be my guest =). When I left, the main problem was with finding the clay rocks. My idea for solving it is this: Autocoloring procedure which will auto-color the white border around rimmington mine. Then make a DDTM with: Main point on the clay rocks, 8 or so subpoints on the border with the border color you have found, area size around 4. Once the script has found the mining site symbol, click a little bit east, then search for the DDTM from angle -30 to 30 or so. Then click on it. It might work…

does this script still work then cos i rele want to try it now:P lol and also… NNOOOO stay away from WoW.. tis a bad bad game which will take ur life and soul…my friend got expelled cos he bunked and played WoW raids or w/e all day dont do it!!!!!

on a brighter note ill try it tonightand see what happens :P

spaz

YESS!!! FINALLY A SCRIPT WORKS FOR ME.

The only problem was that it never changed characters. Other than that, I ran it for like 5 hours, then stopped it, and then ran it for another 5 hours, and it was great. Will post proggy next time, I kinda exited outta Scar, so I have no proggy :(

EDIT: yeah, I had one problem: it didn't find the clay rocks once, so it logged out. this can be fixed according to what Fizzi said, so someone who has scar programming skills, please do so! but without creating more bugs, please.

Spotted a little error. In Soft Clay farmer 2.02 in the proggy is says 2.01??




Here's a proggy for you.

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 5 Hours, 14 Minutes and 31 Seconds
O Loads : 25
O Banked 623 Soft Clay
O Banked 26 Clay
O Avoided gas 14 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O player1 : Still Running!
O player2 : Still Running!
O player3 : Still Running!
O player4 : Still Running!
O player5 : Still Running!
O player6 : Still Running!
O player7 : Still Running!
O player8 : Still Running!
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 6 Hours, 49 Minutes and 40 Seconds
O Loads : 38
O Banked 946 Soft Clay
O Avoided gas 3 times
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Error Report
O==========================================
O * : No longer finding clay rocks
O ** : No longer finding clay rocks
O *** : No longer finding clay rocks
O **** : No longer finding clay rocks
O ***** : No longer finding clay rocks
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Is this dead or is it still working? I will try it out later. I hope Fizzi updates soon and gets back to this though… :(

oh, i would like to point out this script is i would say flawless, besides one little thing i can probably fix myself if i get some help, but on the srl stats log it doesn't tell how many times it banked….. as you can see in my sig, lol…
so yeah, if you could fix this or tell me how, that would be great, oh btw i've made 5m off this now ^_^

i only make 360k off of it lol-1.2k from 2 characters total. ran for about a night each or something (i have short nights- i get up early in the morning). this was some time ago tho, this thread seems to be dead… i'm not sure if it is still working, someone please post a recent proggy! i know i will the second i have enough time…

no this script still works great, i just used thsi last night and got about 1.2k clay, without wetting it. I just forgot and did not post proggie

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O Soft Clay Farmer 2.01
O by Fizzi
O==========================================
O Worked For : 1 Hours, 15 Minutes and 20 Seconds
O Loads : 8
O Banked 200 Soft Clay
fantastic script got me to 250k yesterday :)

Well then, I will continue using this over the winter break- see how well it will operate.

This script works very well for me. I usually can't get them to work, but this one has been easy.
I'm using SCAR 3.12 along with the SRL and Includes it downloaded by clicking on them under File.

Im Using Scarscape….

It never makes it past the main gates, as there is a transition of color in the road from dark grey to light grey.

hmmm?

How about you don't use scarscape considering this is made for RUNESCAPE?

That sounds like a good idea… Use the normal client.

From: mnagi85
How about you don't use scarscape considering this is made for RUNESCAPE?

That sounds like a good idea… Use the normal client.

Do you even know what is scarscape?

It is a modified version of runescape that never changes colour and always has perfect north

nub :stirthepot:

I.E. its designed for scar

does this script still work with the new runescape interface?

I don't know. Why don't you try it and find out.

I tried this script with SCAR 3.14 and SRL Rev 13. I set it to mine and wet clay and started in Fally East Bank. It got all the way down to the "Mining fork" in the road and then it tried to locate the mine but it couldnt because the script wasnt running from the highest viewing angle.

I then started the script at the mine to mine the clay. It filled up and then walked to the well successfully, but it could not use the well because once again the viewing angle wasnt the highest and all you could see on the game screen was Fally's wall.

Im not a scripter at all, but i think there maybe only a few minor problems with this script that could easily be fixed.

The script was not compatible to #14 wait or fix it yourself

I cant seem to find the {.include SRL/SRL/misc/MusicLocation.scar} file. Is there a manual way to get it?

SCAR 3.15\includes\SRL\SRL\misc\MusicLocation.scar does not exist.

I know it has something to do with the srl version, but i updated it and downgraded and it still can't find this include

I have this script fixed to where it compiles with SRL Rev 16.

From: TheVoiceInYourHead
I have this script fixed to where it compiles with SRL Rev 16.

Gief?

I keep getting this error:

Include file C:\Program Files\SCAR 3.15\includes\SRL\SRL\misc\MusicLocation.scar does not exist.

Is there an include that I need to manually download?

someone please bring this script back to life…. i would really love to use it multiplayer with my army and make tons of money :)

When you update this please ;p

Man do I wish that someone fixes this up and gets it back and running again. I wish Fizzi would come back :(