SRL Archive - Other Guides

From: alar82
For me opengl mode crashes. Compatibility mode works.

Are you still able to do this on the latest Windows 10 update? Because it seems they drop support on updating RDP Wrap

From: Thomas
Are you still able to do this on the latest Windows 10 update? Because it seems they drop support on updating RDP Wrap

Yea looking at github it seems that owner of that project isn't interested updating it. So it no longer works.

do you know any other way this is still possible? been looking for something like this!

I still use this. Need to manually update it though; can be a pain in the ass the first time.

Ok so I have had a few people message me asking how to make this work again, so I have decided to write a guide on how to update it.
This guide will assume you have followed Slacky's install guide already, and you are just wanting to fix it.

Video tutorial:
[video=youtube;Pm-kjKdEfdA]https://www.youtube.com/watch?v=Pm-kjKdEfdA&t[/video]

Written tutorial:

1. If you don't already have the archieve folder, download it from here: https://github.com/stascorp/rdpwrap/releases
You want the zip files, not the msi file.
2. Open the zip file to view its contents, and you should see 6 files - a mixture of executable and bat files.

3. Open RDPConf.exe and you will be presented with a screen that looks like this:
Notethat it says [not supported] under the version. If all text is green, then this guide won't fix your issue, otherwise continue on. Be sure to note down the version number of the client. In this case it is 10.0.18362.657. This is important and we will need the information later.
4. Close this interface and open up a command prompt window (run it as an administrator). To do this in Windows 10, Go to start, type cmd, then right click on Command Prompt program and run as administrator.
5. Type or copy the following into the command prompt:

net stop TermService

You will get something that looks like this: Press Y, then enter to confirm. This will stop the TermService program.
6. Now that TermService is closed, we need to find the code to patch the ini file. The easiest way is to google "RDP update <ver>", or in this example "RDP update 10.0.18362.657". There is usually a relevant link to the github, where someone has raised the issue and someone has posted a fix. In this case, someone has raised the issue and posted the fix in the same post: https://github.com/stascorp/rdpwrap/issues/983.
You are after 2x blocks of code that are formatted like:

[10.0.18362.657]
LocalOnlyPatch.x86=1
LocalOnlyOffset.x86=B7D06
LocalOnlyCode.x86=jmpshort
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=82FB5
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x86=1
SingleUserOffset.x86=50535
SingleUserCode.x86=nop
SingleUserPatch.x64=1
SingleUserOffset.x64=0DBFC
SingleUserCode.x64=Zero
DefPolicyPatch.x86=1
DefPolicyOffset.x86=50269
DefPolicyCode.x86=CDefPolicy_Query_eax_ecx
DefPolicyPatch.x64=1
DefPolicyOffset.x64=1FE15
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x86=1
SLInitOffset.x86=5A77A
SLInitFunc.x86=New_CSLQuery_Initialize
SLInitHook.x64=1
SLInitOffset.x64=22DDC
SLInitFunc.x64=New_CSLQuery_Initialize

[10.0.18362.657-SLInit]
bInitialized.x86 =D577C
bServerSku.x86 =D5780
lMaxUserSessions.x86 =D5784
bAppServerAllowed.x86 =D578C
bRemoteConnAllowed.x86=D5790
bMultimonAllowed.x86 =D5794
ulMaxDebugSessions.x86=D5798
bFUSEnabled.x86 =D579C
bInitialized.x64 =F6A8C
bServerSku.x64 =F6A90
lMaxUserSessions.x64 =F6A94
bAppServerAllowed.x64 =F6A9C
bRemoteConnAllowed.x64=F6AA0
bMultimonAllowed.x64 =F6AA4
ulMaxDebugSessions.x64=F6AA8
bFUSEnabled.x64 =F6AAC

As you can see, the title of each block is relevant to your RDP version.
7. Now that we have found our updated code, we need to update the RDP ini file. It is generally located in c:/program files/RDP Wrapper/. Open rdpwrap.ini and edit it in notepad or your text editor of choice.
If you are not able to edit the ini file, or save it, you may need to assign ownership of the file to yourself, or create a copy of it with the fix applied, and overwrite the old one in the RDP Wrapper directory. Assigning ownership is done by right clicking on the file > properties > Security > Advanced and at the top you will see Name and Owner. I assigned Everyone as the owner to make it simplier, but if you are more security conscious that me, do it against your user.
8. With your ini file open, scroll to the very bottom line and insert your 2 blocks of code. Be sure to leave a line separating the previous blocks, and REMEMBER TO LEAVE A BLANK LINE AT THE END.

9. Save the file and close it. Again, if you have issues saving it, follow the above guide or google folder permissions in Windows 10.
10. Now that our file is saved, we want to start the TermService client again. To do this, open up a command prompt and run it as an administrator (follow the same process from step 4). Type or copy the following line into the Command Prompt:

Net Start TermService

This should restart your TermService.
11. Go back to the RDP Wrap archieve file and open it again (if its not still open) and run the RDPConf.exe as demonstrated in step 3. There should now be text showing [fully supported] like so:
If you don't see the text, then you have done something wrong, or there is a deeper issue with your RDP wrap installation.
12. Restart your PC for the changes to properly take effect, then attempt to open another RDP session again. You should no longer get the error "the number of connections to this computer is limited and all connections are in use right now".

FOOT NOTE: If you are having issues with your windows profiles not appearing/giving you the incorrect credential error when using 127.0.0.2, then use 127.0.0.3 as your connection address instead.

Hope this helps!

thanks Slacky and DantheMan for the adjustments.

With me it says "listener State: Not Listening" aswell as "Not Supported".

From: Kristiaan
With me it says "listener State: Not Listening" aswell as "Not Supported".

Use autoupdater to update it. https://github.com/asmtron/rdpwrap/blob/master/binary-download.md
Works fine.

From: Kristiaan
With me it says "listener State: Not Listening" aswell as "Not Supported".

From: alar82
Use autoupdater to update it. https://github.com/asmtron/rdpwrap/blob/master/binary-download.md
Works fine.

I was able to follow Slacky's updated guide and your advice about the update.bat

Here's the key info:

https://github.com/asmtron/rdpwrap/blob/master/binary-download.md

INSTALL of RDP Wrapper and Autoupdater

Download "RDPWrap-v1.6.2.zip" LINK#1 or LINK#2 and extract all files to the "%ProgramFiles%\RDP Wrapper" directory

DO NOT use other location to extract/install the RDP Wrapper files. USE ONLY the "%ProgramFiles%\RDP Wrapper" directory (normally C:\Program Files\RDP Wrapper)

Download autoupdate.zip and extract all files to the "%ProgramFiles%\RDP Wrapper" directory

To enable autorun of autoupdate.bat on system startup, run the folling helper batch file as administrator:

"%ProgramFiles%\RDP Wrapper\helper\autoupdate__enable_autorun_on_startup.bat"

Set in your Antivirus/WindowsDefender an exclusion on the folder "%ProgramFiles%\RDP Wrapper" to prevent the deletion of RDP Wrapper files

Now you can use the autoupdate batch file to install and update the RDP Wrapper. Please run autoupdate.bat as administrator:

"%ProgramFiles%\RDP Wrapper\autoupdate.bat"

EDIT
Unable to get things working minimized. I followed the regedit advice…

Hey @footballjds check this out

From: KeepBotting
Updated OP with a new build in response to the most recent wave of commits to the Simba repository (22nd Aug - 2nd Sep): https://github.com/MerlijnWajer/Simba/commits/fpc-3.0

I will only be updating the 64-bit build of Simba 1.3 from now on, unless anybody wants newer builds of other configurations.

I'd also like to toss a link out to another (small) project of mine, libframebuffer. It is Linux-specific (like the builds on this thread) and works as a great alternative to SMART. It is actually very similar to what was done here as a component of BenLand100's Python macroing solution.

Edit: Updated build again, we are now up-to-date with this commit: https://github.com/MerlijnWajer/Simba/commit/157d9a5dc4b463fd24f934c045cd8d65641b085b

I use on linux and works perfect

EDIT:
Or it did. I only set up it once then realized it'd be easier to retrofit an old laptop I had with linux and now I just use that

Can you do this multiple times on the same desktop to run multiple scripts at once without them interfering with each other?

This is amazing!

Also I had to pop out earlier today and was even able to RDP in from my mobile through my VPN without the connection I had open on the local PC interfering (but I manually stop and start scripts for my non RS game haven't tested if it effects running scripts)