SRL Archive - RS3 Outdated / Broken Scripts

---

Version 2.0 Released!

v1.0 Base release[HR][/HR]v1.1 Fixed some ghetto code. (17 Downloads)[HR][/HR]v1.2 Antiban percentage now implemented. Map now auto-downloads. (12 Downloads)[HR][/HR]v1.3 Fixed some bugs. Uses DTMs to count shafts now. Clicks the done button after crafting arrows
     instead of just clicking on the next tree. (8 downloads)[HR][/HR]v1.4 Hopefully fixed the crafting bug that was popping up. (12 downloads) [HR][/HR]v1.5 Another bug fix. Thank you to sf411. (7 downloads)[HR][/HR]v1.6 Failsafe'd the crafting logs procedure. Now absolutely will continue to craft even if your character 
     moves. Changed the wait function in the crafting procedure to be more low-level friendly. 
     Also decreased the area box so that it will run in when no trees are found instead of just standing
     and waiting.(58 Downloads!)[HR][/HR]v2.0 Added an auto-updater and many other hidden features. Download the newest version to find out :)

gratz on the release

Awesome, pretty good gp/hour for f2p!

Gratz on the release :)

I applaud you on the name.

hey it does not wait the full 42 seconds fore the logs to shafts. how do i change? would it be in the

procedure craftLogs();

From: OriginalGM
hey it does not wait the full 42 seconds fore the logs to shafts. how do i change? would it be in the

procedure craftLogs();

It would be, but it should wait the whole time. Could you be a bit more descriptive?

From: OriginalGM
hey it does not wait the full 42 seconds fore the logs to shafts. how do i change? would it be in the

procedure craftLogs();

It's the:

repeat
  wait(100);
until progressScreen.getButton() <> PROGRESS_BUTTON_CANCEL;

From: therossity
It would be, but it should wait the whole time. Could you be a bit more descriptive?

after i have a full invo of 27 logs with shafts being 28, it will do procedure to make shafts for logs but it get only like 15 seconds or 20 seconds into shafting then it click on evergreens and rinse and repeat. it does not do full invo of shafts which is annoying because it would maximize the profit. i tryed changing the wait(100) but it doesnt matter what i change it to results are same

From: OriginalGM
after i have a full invo of 27 logs with shafts being 28, it will do procedure to make shafts for logs but it get only like 15 seconds or 20 seconds into shafting then it click on evergreens and rinse and repeat. it does not do full invo of shafts which is annoying because it would maximize the profit. i tryed changing the wait(100) but it doesnt matter what i change it to results are same

Does the production process screen pop up? You may have that option turned off in interfaces. It is the line above as said by The Mayor.

From: therossity
Does the production process screen pop up? You may have that option turned off in interfaces. It is the line above as said by The Mayor.

yea it shows them waiting as i said it will not wait the full 43 seconds. it shows producing the shafts and it gets to 15-25 seconds and clicks on evergreens and does not finish the production of a full invo of logs to shafts.


also therossity, the SPS walk back when it walks to far out the area, sometimes it will walk itself all the way to draynor and then sit there. im trying to make a fail safe but im not good at scripting and am getting alot of errors so if you decide to make more sps walkback fail safes can yu teach me so i can learn further on sps?

From: OriginalGM
yea it shows them waiting as i said it will not wait the full 43 seconds. it shows producing the shafts and it gets to 15-25 seconds and clicks on evergreens and does not finish the production of a full invo of logs to shafts.


also therossity, the SPS walk back when it walks to far out the area, sometimes it will walk itself all the way to draynor and then sit there. im trying to make a fail safe but im not good at scripting and am getting alot of errors so if you decide to make more sps walkback fail safes can yu teach me so i can learn further on sps?

Thanks for the report, I tested the Draynor thing myself and it's happening. I THINK it's an issue with SPS as the code seems right but I'll keep looking into both of your issues. I haven't been able to recreate the progress thing yet.

Script moved to public as requested: https://villavu.com/forum/showthread.php?t=110306&p=1309604

From: Justin
…

Thank you!


New version guys! Check it out!



@OriginalGM see if you're getting the error. It should be completely gone!

I've actually been working on a similar script myself, but with dead trees instead! After running this script for a little while, I noticed that sometimes it gets stuck in a loop where it chops one log, starts to craft, and then doesn't wait for all of the logs to finish getting crafted. I'll take a look into it myself once I get a chance to examine the code some more. Also, the program can get stuck trying to find logs in the inventory, and it will never break out of this loop if there are no logs in the inventory.

I get an Antiban infinite loop. I changed the number to 7 before starting the script.

From: yourule97
I've actually been working on a similar script myself, but with dead trees instead! After running this script for a little while, I noticed that sometimes it gets stuck in a loop where it chops one log, starts to craft, and then doesn't wait for all of the logs to finish getting crafted. I'll take a look into it myself once I get a chance to examine the code some more. Also, the program can get stuck trying to find logs in the inventory, and it will never break out of this loop if there are no logs in the inventory.

From: sf411
I get an Antiban infinite loop. I changed the number to 7 before starting the script.

Interesting, I didn't have these bugs when running. I'll take a look at it when I get home!

I've also had the problem where it doesn't cut all of the logs (it happened to me one out of the two times I've used this so far, and it would randomly cut between 4 and 8 before starting to get more logs).

Also, just as a suggestion, maybe adding more locations would be helpful so that one place doesn't get too congested. Places like west varrock also have a lot of trees close together for example.

Proggy for you (using mith hatchet and like 30ish woodcutting), still running strong :)

===========Rossity's Shaft Shaver============
Logs cut: 1763
Shafts crafted: 26445
Profit: 687570
Shafts per hour: 6691
Profit per hour: 173966
Time running: 03h 57m 08s
==============================================

From: yourule97
sometimes it gets stuck in a loop where it chops one log, starts to craft, and then doesn't wait for all of the logs to finish getting crafted.

Increased the wait time when searching for the "Done" button in the progress screen, so this shouldn't happen anymore.

From: yourule97
Can get stuck trying to find logs in the inventory, and it will never break out of this loop if there are no logs in the inventory.

Added a fail-safe for this.

From: sf411
I get an Antiban infinite loop. I changed the number to 7 before starting the script.

I wasn't able to reproduce this even when upping my antiban to 100%, could you be a little more specific?

From: ibot101
I've also had the problem..

Also..maybe adding more locations would be helpful so that one place doesn't get too congested.

Fixed, see above. Also, it's difficult to code for those areas because the mouseover text can only be "ree", and what about oak, yew etc.? Also, regular trees can go on forever, and become very spaced out whereas Evergreens and Dead trees and very unique and clustered. This script shouldn't cause too much congestion as it's a small community. Also, shaft prices are going up! Just sold for 27gp each.

From: ibot101
Proggy for you.

Thanks! looking good.

---

I also just added a more practical way of counting shafts done using DTMs. Make sure to update to v1.3.


Here's a small proggy with antiban at 5%.

===========Rossity's Shaft Shaver============
     Logs cut: 84
     Shafts crafted: 1215
     Profit: 31590
     Shafts per hour: 8011
     Profit per hour: 208286
     Time running: 09m 06s
==============================================

e: Here's a better one.

===========Rossity's Shaft Shaver============
     Logs cut: 1179
     Shafts crafted: 17415
     Profit: 452790
     Shafts per hour: 7952
     Profit per hour: 206752
     Time running: 02h 11m 24s
==============================================

I'm also getting the problem where it crafts one log and then clicks on another evergreen before the inventory is done. I'm using 1.3

From: Jonte20
I'm also getting the problem where it crafts one log and then clicks on another evergreen before the inventory is done. I'm using 1.3

===========Rossity's Shaft Shaver============
     Logs cut: 3097
     Shafts crafted: 45765
     Profit: 1189890
     Shafts per hour: 8044
     Profit per hour: 209144
     Time running: 05h 41m 20s
==============================================

Been running for 6 hours and that hasn't happened to me. Are you using directX or OGL?

From: therossity

===========Rossity's Shaft Shaver============
     Logs cut: 3097
     Shafts crafted: 45765
     Profit: 1189890
     Shafts per hour: 8044
     Profit per hour: 209144
     Time running: 05h 41m 20s
==============================================

Been running for 6 hours and that hasn't happened to me. Are you using directX or OGL?

Using both

From: Jonte20
Using both

Okay, try upping the wait time at line 213 to 3000 or 4000 and let me know if that fixes it for you.

if progressScreen.isOpen(3000) then 

From: therossity
Okay, try upping the wait time at line 213 to 3000 or 4000 and let me know if that fixes it for you.

if progressScreen.isOpen(3000) then 

Works great. Thank you!

From: Jonte20
Works great. Thank you!

Great! I'll edit OP shortly.

v1.4 released.

All bugs should be fixed now. Enjoy while profits are still high guys!

Nice script, perfect for f2p members wanting a little extra gp.

great script, and I think that, due to the small nature of srl and the huge amount of people who play legit and make arrow shafts, we should have virtually no effect on prices :) (as long as no idiots run 50 bots at a time on 50 computers in 50 locations in 50 countries)

prices have actually been going up :P

From: ibot101
great script, and I think that, due to the small nature of srl and the huge amount of people who play legit and make arrow shafts, we should have virtually no effect on prices :) (as long as no idiots run 50 bots at a time on 50 computers in 50 locations in 50 countries)

prices have actually been going up :P

Yeah, with my own personal script, I noticed a similar thing with prices. I think its the double xp weekend hype. Anyways, you should never instant sell these shafts!!

EDIT: I also don't feel like this warrants another post, but I noticed that the script tends to get stuck right here in between the two trees. The script still works, but it only cuts those two trees.

[ATTACH=CONFIG]24065[/ATTACH]

From: yourule97
I noticed that the script tends to get stuck right here in between the two trees

That's odd. Is it not looking for other trees or something?

Sometimes it crafts all the logs, sometimes not. Runs great though.

From: tulpiuka
Sometimes it crafts all the logs, sometimes not. Runs great though.

Can you describe exactly what happens? Odd that people keep getting the error when I have not.

Difficult to say. When i first started up the script. It would craft about half the inventory and get back to chopping. Now it seems to do the full inventory. I would guess it has something to do with levels?
Well it runs great now that it has over 30 wc and 5 fletching.

if tabBackpack.isfull then
    begin
      findLogs();
      craftLogs();
      while tabBackpack.count() > 1 do
        wait(500);
    end

Fixes the crafting issue of only doing 1 or 2 logs at a time.

From: sf411

if tabBackpack.isfull then
    begin
      findLogs();
      craftLogs();
      while tabBackpack.count() > 1 do
        wait(500);
    end

Fixes the crafting issue of only doing 1 or 2 logs at a time.

Great idea. Thank you!

From: tulpiuka
Difficult to say. When i first started up the script. It would craft about half the inventory and get back to chopping. Now it seems to do the full inventory. I would guess it has something to do with levels?
Well it runs great now that it has over 30 wc and 5 fletching.

Probably had to do with the dwarven army axe popup.


e: v1.5 up

From: therossity
That's odd. Is it not looking for other trees or something?

It only chops those two trees. The account I am using has managed to get 54 wc, so it cuts trees pretty fast which is why I think it always manages to reach that side of the map every time without fail.

From: yourule97
It only chops those two trees. The account I am using has managed to get 54 wc, so it cuts trees pretty fast which is why I think it always manages to reach that side of the map every time without fail.

I get that, but are there no other trees on the screen?

Yeah, it just happens to be the perfect/worst spot where it only sees those two trees.

//===========Rossity's Shaft Shaver============
     Logs cut: 1302
     Shafts crafted: 37680
     Profit: 1055040
     Shafts per hour: 12065
     Profit per hour: 337820
     Time running: 03h 07m 23s
//==============================================

This is with the fix.

I have to walk it over to some trees, it can not find trees and waits for some to regrow sometimes but otherwise it works flawlessly for me, is this common or a way to fix it?

===========Rossity's Shaft Shaver============
Logs cut: 317
Shafts crafted: 5295
Profit: 153555
Shafts per hour: 3928
Profit per hour: 113912
Time running: 01h 20m 53s
==============================================

[ATTACH=CONFIG]24067[/ATTACH]

This is where it likes to get stuck for me.

If you sit there and change the camera angle when it gets stuck then it will continue before it resets the camera and gets stuck at those points again, an excellent trade off to actually just doing it yourself but if it can't find a tree maybe adding in camera rotation to ground level and circling until it finds a tree would work. I tilt the camera until it is floor level and that seems to be enough, I'm a nub or I would put it in myself.

If it clicks on a tree to far out you did an excellent job on getting it to run back after it cuts the tree. Solid script, thank you =]

From: sf411

//===========Rossity's Shaft Shaver============
     Logs cut: 1302
     Shafts crafted: 37680
     Profit: 1055040
     Shafts per hour: 12065
     Profit per hour: 337820
     Time running: 03h 07m 23s
//==============================================

This is with the fix.

Sick! I'm gonna put this in OP.

From: Thisaintmeyo
[ATTACH=CONFIG]24067[/ATTACH]

This is where it likes to get stuck for me.

If you sit there and change the camera angle when it gets stuck then it will continue before it resets the camera and gets stuck at those points again, an excellent trade off to actually just doing it yourself but if it can't find a tree maybe adding in camera rotation to ground level and circling until it finds a tree would work. I tilt the camera until it is floor level and that seems to be enough, I'm a nub or I would put it in myself.

If it clicks on a tree to far out you did an excellent job on getting it to run back after it cuts the tree. Solid script, thank you =]

When I get home tonight I'll take a look at it and see what I can do. Maybe I'll define another area box to run to when it can't find any trees. I haven't been a fan of camera rotations lately because they haven't been working well for me :p

From: sf411

//===========Rossity's Shaft Shaver============
     Logs cut: 1302
     Shafts crafted: 37680
     Profit: 1055040
     Shafts per hour: 12065
     Profit per hour: 337820
     Time running: 03h 07m 23s
//==============================================

This is with the fix.

Holy crap, how are you getting so much per hour? I have a 55 wc account with rune axe doing 190k/h… any tips? :P

Use a seers headband, get a chance for 2 logs at a time. I'm level 80wc with a rune axe.

oh okay, thanks, never heard of that before :P

From: therossity
Sick! I'm gonna put this in OP.



When I get home tonight I'll take a look at it and see what I can do. Maybe I'll define another area box to run to when it can't find any trees. I haven't been a fan of camera rotations lately because they haven't been working well for me :p

Ah, alright I don't have any knowledge of this stuff yet I was just telling you what I was doing to get it to get unstuck is all. Thank you for having a look at it.

From: tulpiuka
Difficult to say. When i first started up the script. It would craft about half the inventory and get back to chopping. Now it seems to do the full inventory. I would guess it has something to do with levels?
Well it runs great now that it has over 30 wc and 5 fletching.

From: therossity
Probably had to do with the dwarven army axe popup.

progressScreen.getButton() will be returning -1 (i.e. thinks progress screen is closed) as your player levels up because the sparks fly over the cancel button.

From: The Mayor
progressScreen.getButton() will be returning -1 (i.e. thinks progress screen is closed) as your player levels up because the sparks fly over the cancel button.

Makes sense. I guess there's no easy fix to that then?

From: therossity
Makes sense. I guess there's no easy fix to that then?

Pretty easy to fix. countColorTolerance in the button box instead of reading the text. Red colour for cancel, blue for done.

From: The Mayor
Pretty easy to fix. countColorTolerance in the button box instead of reading the text. Red colour for cancel, blue for done.

Cool! I'll work on that right now.

v1.6 released

I think users will be very pleased. Check OP for details.

For anyone curious I fiddled with the findLogs, craftLogs, and Main Loop procedures.


@Thisaintmeyo @ibot101

Should I have progress window on? I have it off and right now it just waits for 2 logs to craft then it clicks on the next log and starts crafting again. Rinse repeat. I put my fix back in and it seems to work fine.

From: sf411
Should I have progress window on? I have it off and right now it just waits for 2 logs to craft then it clicks on the next log and starts crafting again. Rinse repeat. I put my fix back in and it seems to work fine.

Yeah have progress/production window on.

great script man, really appreciate how often you're keeping this updated :)

[ATTACH=CONFIG]24073[/ATTACH]

It likes to get stuck behind this rock when trying to cut the trees to the right of it but other than that it's flawless and always finds trees and crafts logs when full and antibans often.

===========Rossity's Shaft Shaver============
Logs cut: 68
Shafts crafted: 1215
Profit: 35235
Shafts per hour: 6484
Profit per hour: 188036
Time running: 11m 14s
==============================================

I will post a longer one starting with no shafts here in a few hours if you want.

From: ibot101
great script man, really appreciate how often you're keeping this updated :)

Thank you :) I try my best!

From: Thisaintmeyo
[ATTACH=CONFIG]24073[/ATTACH]

It likes to get stuck behind this rock when trying to cut the trees to the right of it but other than that it's flawless and always finds trees and crafts logs when full and antibans often.

Interesting, is that another place where no other tress show up on the screen?

No problem with the script, its just the pathing sucks in that particular spot to cut the tree behind the rock. Right next to this area there is a group of 3 trees where the pathing messes up to get to the middle one but would otherwise have no problem if it was selected from the other side. Your updated script fixed any and all problems with the original problem of not finding a tree.

This only shaves off a couple seconds off your profit time though so it is nothing to really worry about as your script finds a new tree within a decent time anyways, I just thought I would mention it.

===========Rossity's Shaft Shaver============
Logs cut: 730
Shafts crafted: 10545
Profit: 305805
Shafts per hour: 7718
Profit per hour: 223822
Time running: 01h 21m 58s
==============================================

[ATTACH=CONFIG]24079[/ATTACH]
[ATTACH=CONFIG]24077[/ATTACH]


Here is the exact area.

Thank you for the script, it works flawless now and basically doubles your investment in ge. I can see this being integrated into other scripts easy.

From: therossity
Interesting, is that another place where no other tress show up on the screen?

There seem to be problems in particular with walking close to the altar. Not a script fault but RS fault in that the walking starts, get close to the altar, then the flag just disappears and the player stops. Sometimes walking to a safe spot can be ruined by walking close to the altar.

===========Rossity's Shaft Shaver============
Logs cut: 2566
Shafts crafted: 38085
Profit: 1104465
Shafts per hour: 7682
Profit per hour: 222778
Time running: 04h 57m 26s
==============================================

mm dat f2p monies

From: ibot101
===========Rossity's Shaft Shaver============
Logs cut: 2566
Shafts crafted: 38085
Profit: 1104465
Shafts per hour: 7682
Profit per hour: 222778
Time running: 04h 57m 26s
==============================================

mm dat f2p monies

Great! Thank you for the proggy :)

I ran into a couple problems today, seemed to pop up out of nowhere and obviously one of the problems was probably caused on my end. The first one being that the script isn't recognizing a full inventory of logs nor will it start to craft them. Out of the blue for no reason what so ever, any idea on what may be causing this? I redownloaded a fresh script but that didn't solve the problem and I redownloaded Simba but that didn't solve the issue either.

The last one randomly happens for no reason at all as well, it will randomly click the minimap close to the Yew tree and just sit there until you disable smart and reposition your avatar. No rhyme or reason to it.

I fixed it by re-sizing my inventory smaller then back to where it was, have not encountered the other problem again yet so its just random at best.

From: Thisaintmeyo
…

Hmmm.. yeah. A tip for the future that I do is just set it to Old School Layout, and if it's working after that then I know it's a layout problem on my end.

A lot of worlds are filled with these bots now which is fine, but we should all be listing the shafts at +5%, because the arrows are starting to crash.

From: yourule97
A lot of worlds are filled with these bots now which is fine, but we should all be listing the shafts at +5%, because the arrows are starting to crash.

honestly in my week of using this on 2 accounts every day, I have never once seen someone else doing this on the same world as me :P

but yeah everyone should be selling this at +1 gp to the mid GE price, although the decrease in price may just be natural fluctuation seeing as it recently went up 10% for seemingly no reason

That was probably me i was training my wc up a bit. Now you wont see me :) I switched worlds if i saw anyone else chopping.I wont be chopping any more so it shouldn't crash much. Only selling around 1 or 2m sticks. Again sorry if they crash.

From: tulpiuka
That was probably me i was training my wc up a bit. Now you wont see me :) I switched worlds if i saw anyone else chopping.I wont be chopping any more so it shouldn't crash much. Only selling around 1 or 2m sticks. Again sorry if they crash.

It's not you, use to your heart's content :)

Working good so far. Have experience the RS pathing issue but that's it. Made 200k in about an hour.

You should update the one in the OP with:

===========Rossity's Shaft Shaver============
     Logs cut: 3557
     Shafts crafted: 52185
     Profit: 1408995
     Shafts per hour: 5568
     Profit per hour: 150336
     Time running: 09h 22m 18s
==============================================

From: Frement
You should update the one in the OP with:

===========Rossity's Shaft Shaver============
     Logs cut: 3557
     Shafts crafted: 52185
     Profit: 1408995
     Shafts per hour: 5568
     Profit per hour: 150336
     Time running: 09h 22m 18s
==============================================

Updated <3

From: Ross
Updated <3

===========Rossity's Shaft Shaver============
     Logs cut: 2828
     Shafts crafted: 41145
     Profit: 1028625
     Shafts per hour: 5468
     Profit per hour: 136700
     Time running: 07h 31m 30s
==============================================

is there any way to restrict the use of a script to like less than 3 accounts or something? prices are crashing hard, and judging by the number of people on SRL, it's probably some asshat botting like 50 accounts selling at low :\

From: ibot101
is there any way to restrict the use of a script to like less than 3 accounts or something? prices are crashing hard, and judging by the number of people on SRL, it's probably some asshat botting like 50 accounts selling at low :\

No, I could restrict it to higher boards but it wouldn't get used.

P.S. @Frement

From: ibot101
is there any way to restrict the use of a script to like less than 3 accounts or something? prices are crashing hard, and judging by the number of people on SRL, it's probably some asshat botting like 50 accounts selling at low :\

I'm not an asshat :( And I sold only 300K shafts at low price because I needed fast money.

Say that to the guy with 4-5 blue dragon bots in almost every channel :/ pisses me off.

I don't think we impact the economy as much as we think we do. I suppose to be totally sure, Ross should add live stat tracking :)

From: Clarity
I don't think we impact the economy as much as we think we do. I suppose to be totally sure, Ross should add live stat tracking :)

Halp

From: Ross
Halp

Sure, let's PM sometime :)

live tracking would be interesting :P

===========Rossity's Shaft Shaver============
     Logs cut: 2419
     Shafts crafted: 36465
     Profit: 875160
     Shafts per hour: 5633
     Profit per hour: 135192
     Time running: 06h 28m 24s
==============================================

===========Rossity's Shaft Shaver============
     Logs cut: 2340
     Shafts crafted: 34440
     Profit: 826560
     Shafts per hour: 5424
     Profit per hour: 130176
     Time running: 06h 20m 57s
==============================================

These two are still running.

===========Rossity's Shaft Shaver============
     Logs cut: 5694
     Shafts crafted: 84540
     Profit: 2028960
     Shafts per hour: 6030
     Profit per hour: 144720
     Time running: 14h 01m 13s
==============================================

===========Rossity's Shaft Shaver============
     Logs cut: 2661
     Shafts crafted: 390
     Profit: 9360
     Shafts per hour: 27
     Profit per hour: 648
     Time running: 14h 23m 22s
==============================================

The last report has messed up shafts crafted, it has crafted 40290 really.

EDIT: The two remaining bots stopped too before they hit the 15h mark.

Version 2.0 Released

Please download from OP. Very important update!

200k shafts sold, price is dropping hard thought. Gonna run the new version later today.

ignorethis

From: ibot101
how do you get yours to go past the limit? mine doesn't log in properly - it just sits there at login with pass and user inputted but doesn't hit enter. Is this script-side or just the client?

I do have problems with the 6 hour limit on my Windows 8 VM. If you have W8 that might be a probable cause.

awkwardly enough, it now logs in properly for me :P ignore my last post then

I see live stats have been added :) is there any way for us to check it?

From: ibot101
awkwardly enough, it now logs in properly for me :P ignore my last post then

I see live stats have been added :) is there any way for us to check it?

Not at the moment, but there will be soon :)

Working great, I´ll post a proggy later :D

Hi there… The script looks great, but I start it at the body altar and it points at the evergreen's, stands in the option, but doesnt click it to chop, just stands there doing anti ban movements and actions. Is it a bug or am I missing something? Thanks :)




EDIT: It works flawlessly, I hadn't set the interface setting correctly so this bug was happpening. Great work!

Here are some proggies, they are still running thought:

===============Ross's Shafter================
     Logs cut: 5212
     Shafts crafted: 78180
     Profit: 1719960
     Shafts per hour: 4996
     Profit per hour: 109912
     Time running: 15h 38m 56s
==============================================

===============Ross's Shafter================
     Logs cut: 4644
     Shafts crafted: 69660
     Profit: 1532520
     Shafts per hour: 4533
     Profit per hour: 99726
     Time running: 15h 22m 05s
==============================================

===============Ross's Shafter================
     Logs cut: 4617
     Shafts crafted: 69255
     Profit: 1523610
     Shafts per hour: 4524
     Profit per hour: 99528
     Time running: 15h 18m 30s
==============================================

EDIT: Stopping them manually now, but they would've still kept going :)

I've just started running this script and it's really fun looking at the code and somewhat understanding what is going on– thank you for providing this.

I'll post a proggy later on once I get some hours logged

From: Frement
Here are some proggies, they are still running thought:

===============Ross's Shafter================
     Logs cut: 5212
     Shafts crafted: 78180
     Profit: 1719960
     Shafts per hour: 4996
     Profit per hour: 109912
     Time running: 15h 38m 56s
==============================================

===============Ross's Shafter================
     Logs cut: 4644
     Shafts crafted: 69660
     Profit: 1532520
     Shafts per hour: 4533
     Profit per hour: 99726
     Time running: 15h 22m 05s
==============================================

===============Ross's Shafter================
     Logs cut: 4617
     Shafts crafted: 69255
     Profit: 1523610
     Shafts per hour: 4524
     Profit per hour: 99528
     Time running: 15h 18m 30s
==============================================

EDIT: Stopping them manually now, but they would've still kept going :)

This is awesome! Thank you for the proggies!

From: wowgnomes
I've just started running this script and it's really fun looking at the code and somewhat understanding what is going on– thank you for providing this.

I'll post a proggy later on once I get some hours logged

Sounds great! Welcome to the forums, let me know if you need some help getting started :)

===============Ross's Shafter================
Logs cut: 297
Shafts crafted: 4455
Profit: 98010
Shafts per hour: 2592
Profit per hour: 57024
Time running: 01h 43m 07s
==============================================
The proggy got slightly screwed up– it crafted around 10.5k shafts which were about 220k profit…
I'd like to say thanks again for making this– worked pretty great! (although once it traveled up to edgeville and got stuck on the other side of the river)

From: wowgnomes
===============Ross's Shafter================
Logs cut: 297
Shafts crafted: 4455
Profit: 98010
Shafts per hour: 2592
Profit per hour: 57024
Time running: 01h 43m 07s
==============================================
The proggy got slightly screwed up– it crafted around 10.5k shafts which were about 220k profit…
I'd like to say thanks again for making this– worked pretty great! (although once it traveled up to edgeville and got stuck on the other side of the river)

Interesting. That's the second SPS related bug I've received… I'll have to look into updating the map again.

Thanks for the proggy and bug report :)

I also get the edgeville bug; it gets near the wildy wall near the bridge next to the GE wall and just sits there. It doesn't happen very often though

===============Ross's Shafter================
Logs cut: 1485
Shafts crafted: 22275
Profit: 490050
Shafts per hour: 2368
Profit per hour: 52096
Time running: 09h 24m 19s
==============================================
manually stopped, passed 6 hr limit flawlessly :)
profit per hour is bugged, I believe it's taking the total amount (from all sessions, including before reseting client) of time and dividing the number of shafts only in current session by that time and extrapolating that to get flawed profits

From: ibot101
I also get the edgeville bug; it gets near the wildy wall near the bridge next to the GE wall and just sits there. It doesn't happen very often though

===============Ross's Shafter================
Logs cut: 1485
Shafts crafted: 22275
Profit: 490050
Shafts per hour: 2368
Profit per hour: 52096
Time running: 09h 24m 19s
==============================================
manually stopped, passed 6 hr limit flawlessly :)
profit per hour is bugged, I believe it's taking the total amount (from all sessions, including before reseting client) of time and dividing the number of shafts only in current session by that time and extrapolating that to get flawed profits

Hmm, yeah looks that way. I have an idea to fix that, thank you.

===============Ross's Shafter================
Logs cut: 54
Shafts crafted: 810
Profit: 17820
Shafts per hour: 5756
Profit per hour: 126632
Time running: 08m 26s
==============================================

Had 3x 8 hour proggies but didn't bother to save them. I need to make some changes to the break handler and then I can get longer then 15 hour proggies.

===============Ross's Shafter================
Logs cut: 783
Shafts crafted: 11745
Profit: 258390
Shafts per hour: 1049
Profit per hour: 23078
Time running: 11h 12m 06s
==============================================

and

===============Ross's Shafter================
Logs cut: 2484
Shafts crafted: 37260
Profit: 819720
Shafts per hour: 3356
Profit per hour: 73832
Time running: 11h 06m 07s
==============================================

were run simultaneously– each actually made around 1.5m worth of shafts tho not what it says on the proggy

that's awesome! the multiple session shaft counting fix is coming soon.

===============Ross's Shafter================
     Logs cut: 1755
     Shafts crafted: 26325
     Profit: 552825
     Shafts per hour: 2552
     Profit per hour: 53592
     Time running: 10h 18m 57s
==============================================

The proggy messed up somewhere over the course of last night.. but

From: Camel

===============Ross's Shafter================
     Logs cut: 1755
     Shafts crafted: 26325
     Profit: 552825
     Shafts per hour: 2552
     Profit per hour: 53592
     Time running: 10h 18m 57s
==============================================

The proggy messed up somewhere over the course of last night.. but

Thanks for the proggy! A fix is coming for that in the next update :)

Hey thanks for this script. This script works okay for me. I think it was chopping a little bit slow. I feel like it could go and chop more trees per hour it only chops from a few of the trees and then wait.

===============Ross's Shafter================
Logs cut: 2000
Shafts crafted: 30000
Profit: 630000
Shafts per hour: 2857
Profit per hour: 59997
Time running: 10h 29m 55s
==============================================
:) this has gotten me from 1 to 79 wc so far lmao

===============Ross's Shafter================
Logs cut: 568
Shafts crafted: 8520
Profit: 161880
Shafts per hour: 4094
Profit per hour: 77786
Time running: 02h 04m 51s
==============================================

Works well… But you might consider changing the color for the evergreens. It often doesn't recognize when there is a tree on the edge and will stand there waiting for on to appear.

From: aran armath
===============Ross's Shafter================
Logs cut: 568
Shafts crafted: 8520
Profit: 161880
Shafts per hour: 4094
Profit per hour: 77786
Time running: 02h 04m 51s
==============================================

Works well… But you might consider changing the color for the evergreens. It often doesn't recognize when there is a tree on the edge and will stand there waiting for on to appear.

Thankks for the report, knew they'd have to get updated eventually! I'll do that very soon.

I am getting the following errors:

Warning! You passed a wrong xe to a finder function: 461275756. The client has a width of 800, thus the xe is out of bounds. Setting the value to 799 (w-1) for now.
Warning! You passed a wrong ye to a finder function: 111766420. The client has a height of 600, thus the ye is out of bounds. Setting the value to 599 (h-1) for now.
Warning! You passed a wrong xe to a finder function: 461275756. The client has a width of 800, thus the xe is out of bounds. Setting the value to 799 (w-1) for now.
Warning! You passed a wrong ye to a finder function: 111766420. The client has a height of 600, thus the ye is out of bounds. Setting the value to 599 (h-1) for now.
-1 shafts found in backpack at start.

…even though I had ~2000.

Also, when it tries to craft the logs, it does it two at a time, which from earlier posts should have been fixed?

normal logs are worth more money than shafts

for me it just logs in and doesn't move at all. reports that I have x arrow shafts bla bla, but no movement at all.

From: xCrazyGuyNL
normal logs are worth more money than shafts

From: mkmk4
for me it just logs in and doesn't move at all. reports that I have x arrow shafts bla bla, but no movement at all.

I don't want to steal from Ross, but if he isn't maintaining this anymore I've got a script which works in the same spot. It fletches or banks logs. It's in the woodcutting section.

From: 3Garrett3
I don't want to steal from Ross, but if he isn't maintaining this anymore I've got a script which works in the same spot. It fletches or banks logs. It's in the woodcutting section.

can you post a link to this script?

thanks.
mkmk4

From: mkmk4
can you post a link to this script?

thanks.
mkmk4

No because I'd feel like I was hijacking this thread. I'll PM it to you, although it's literally in this same subforum except in the Woodcutting section.

From: 3Garrett3
No because I'd feel like I was hijacking this thread. I'll PM it to you, although it's literally in this same subforum except in the Woodcutting section.

It's all good man I don't need the credit. I haven't maintained this in a while and you definitely have maintained yours! I'm probably going to report this outdated.

Moved to outdated on request