SRL Archive - RS3 Fishing

Description
Harpoons tuna and swordfish, OR cages lobsters at the Karamja dock. Notes fish at Stiles.
Now with an option to powerfish!

Features

• 100% color!
• Fishes tuna/swordfish OR lobster with incredible speed (>30k xp/hr)!
• Notes fish at Stiles, or drops them for faster xp (>40k/hr)!
• Fast & accurate object finding using DTMs, TPAs, ATPAs, and T2DPAs.
• Robust antipattern to reduce ban rates to an absolute minimum!
• Informative progress report, painted on SMART!
• Passes the 6-hour limit!
• Fast and accurate pathfinding using SPS!
• Compatible with RS3 and uses SRL-6!
• Numerous failsafes to prevent script failure!

How to Use
0) MAKE SURE YOU'RE USING DIRECT-X MODE! Log in to RS > Press Esc > Graphics Options > Custom > Direct-X THE SCRIPT WILL NOT WORK ON OPENGL MODE!
0) Download & install the Direct-X plugin if you haven't already. (Download: here, place it in C:/Simba/Plugins/) No longer needed, d3d9.dll ships with Simba.
0) Download & install the SPS map if you haven't already. (Download: here, place it in C:/Simba/Includes/SPS/img/)

1) Fill out your player info.

///////////////////////////////////Start setting up the script here. Refer to the comments if you don't know what you're doing.
///////////////////////////////////
/////       Start Setup     ///////
///////////////////////////////////
///////////////////////////////////Start setting up the script here. Refer to the comments if you don't know what you're doing.

const
   (* player info *)
   playerNames  = ['']; //Put your player's name (or nickname, if you set one) here.
   playerFile   = 'default'; //Put your playerfile's name here. Default is 'default'.
   desiredWorld = 0; //Enter your desired world number here. 0 for random.

   (* globals *)
   fishType = 'swordfish'; //Lobster, swordfish, tuna
   powerFish = false; //Powerfishing mode: fish & drop. True for yes, false for no.
                     //If you're powerfishing, have tuna on slot 1, swordfish on slot 2, and lobster on slot 3.

   (* options *) //these will need adjusted based on your fishing level
                 //they're in seconds, NOT milliseconds
   minWait = 8;  //MIN wait for catching a fish, make this HIGHER if it waits too SHORT (clicking on another spot while still fishing)
   maxWait = 16; //MAX wait for catching a fish, make this LOWER if it waits too LONG (doing nothing for a long time after spot is gone)

   minMouseSpeed = 15; //MIN speed at which to move the mouse
                       //Default values for these should be just fine. If you must change, lower = slower, higher = faster
   maxMouseSpeed = 20; //MAX speed at which to move the mouse

///////////////////////////////////Don't modify the script ANY FURTHER unless you know what you're doing. You could break stuff!
///////////////////////////////////
/////       Stop Setup      ///////
///////////////////////////////////
///////////////////////////////////Don't modify the script ANY FURTHER unless you know what you're doing. You could break stuff!    

2) Place your character at the Karamja fishing spot, at Stiles, or anywhere along the path in between!
3) If powerfishing, set up your action bar like this & make sure you're in action mode.
4) Zoom all the way OUT.
5) Start the script!

Requirements
1) 35 fishing for tuna, 50 for swordfish, and 40 for lobster.
2) A harpoon or lobster cage in your toolbelt.

Additional Info
-> You MUST be on Direct-X mode for this script to run properly.
-> This script uses the SPS map and walking paths from @footballjds; Karamja fishing script (with permission).

Current Bugs
-> Nope.

Future Updates
-> Nope.

Proggies

Top proggy by @mrisperfect; with an insane 51 and a half hours!

2nd place by @lanadekat;, clocking in at a hefty 42 and a half hours.


Update Log

v1.1
-added powerfishing
-fixed lobster dtm

v1.0
- download link was immediately moved off-site because the initial release exceeded villavu's filesize restrictions, download can be found directly below "last updated"
- initial release

ICWYDT

That's the biggest bitmap I ever saw lol.

Gratz on the release!

From: bonsai
ICWYDT

That's the biggest bitmap I ever saw lol.

Gratz on the release!

HAHA, I knew someone would!

Yeah, unfortunately I don't think there's a way around that.

Thanks! ^^

Script is running smoothly for more than 3 hours atm. What would be the xp rates with power fishing at around lvl 90, when the feature gets added ofc.

From: Mantasx27
Script is running smoothly for more than 3 hours atm. What would be the xp rates with power fishing at around lvl 90, when the feature gets added ofc.

Good, good


Rough estimate, somewhere around 40-45k xp/hr

Arf, couldn't make it work yet ! :s

---- tabBackpack.countDTM(): Found no DTM matches
[DEBUG]     : Counted 0 lobsters.
Exception in Script: Runtime error: "The Box you passed to Rectangle doesn't have normal bounds: (1,811) : (576,598)" at line 78, column 17 in file "C:\Simba\Includes\srl-6\lib\utilities\drawing.simba"
The following DTMs were not freed: [0, 1, 2]
The following bitmaps were not freed: [Minimap Mask, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13], 16]
File[C:\Simba\Includes\SRL-6/logs/SRL log (30-06-14 at 04.39.12 AM).txt] has not been freed in the script, freeing it now.

From: Xlr
Arf, couldn't make it work yet ! :s

---- tabBackpack.countDTM(): Found no DTM matches
[DEBUG]     : Counted 0 lobsters.
Exception in Script: Runtime error: "The Box you passed to Rectangle doesn't have normal bounds: (1,811) : (576,598)" at line 78, column 17 in file "C:\Simba\Includes\srl-6\lib\utilities\drawing.simba"
The following DTMs were not freed: [0, 1, 2]
The following bitmaps were not freed: [Minimap Mask, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13], 16]
File[C:\Simba\Includes\SRL-6/logs/SRL log (30-06-14 at 04.39.12 AM).txt] has not been freed in the script, freeing it now.

That's weird. Are your interfaces correct? Is SRL up-to-date?

Yes it is :3
Yeah, I checked and rechecked everything, my other scripts are working, I gone on directX etc… I wonder where the problem comes from D:

From: Xlr
Yes it is :3
Yeah, I checked and rechecked everything, my other scripts are working, I gone on directX etc… I wonder where the problem comes from D:

What are you fishing? Does the script count the other items properly?

Edit: make sure your interpreter is set to Lape (Script > Interpreter > Lape)

Tried all of three, no matter, same problem !

From: Xlr
Tried all of three, no matter, same problem !

Quite strange. Add my Skype (keepbotting), maybe I can help you better over screenshare or TV

From: KeepBotting
Good, good


Rough estimate, somewhere around 40-45k xp/hr

I'm getting 46k with your flyfisher, this skill is so strange lol

does he have the direct x plugin for simba? it doesn't install by default. I will give this script a try at some point when I get round to fishing again.

Yeah, everything was well installed, do not worry about that !

I made it finally work, thank you so much for your helps both of you !

Am a C/C++ coder, not a pascal one, but I took a closer look this morning (while it's 1pm here lol, just woke up !).
I gone to the simba.writer, as the scripts stops when rectangle was given a false value, I understood it was a freeing problem, tried to understand step by step the script running, and found on line 4233 on the paintProggy function the self.clearArea of simba.writer, wich was giving a wrong box object, I didn't really tried to fix it, I gone like a barbare, just //-it to see what gonna happened, and PIFPOUFPATAPOUUUF, I do not have any progress report, but the script is running well now ! :D

Again, thanks to you guys ! You're amazing :)

Edit : Well am not the best english speaker, I try to improve everyday ! An example is better thant my explanations :

//smartImage.clearArea(chatBox.getBounds());    

That's all folks !

From: Mantasx27
I'm getting 46k with your flyfisher, this skill is so strange lol

Fly fishing is indeed faster xp than caging or harpooning, which makes NO sense, but this is Jagex we're talking about :D

From: alexwillows
does he have the direct x plugin for simba? it doesn't install by default. I will give this script a try at some point when I get round to fishing again.

Read the setup, there's a little blurb about where/how to download/install the Direct-X plugin.

From: Xlr
Yeah, everything was well installed, do not worry about that !

I made it finally work, thank you so much for your helps both of you !

Am a C/C++ coder, not a pascal one, but I took a closer look this morning (while it's 1pm here lol, just woke up !).
I gone to the simba.writer, as the scripts stops when rectangle was given a false value, I understood it was a freeing problem, tried to understand step by step the script running, and found on line 4233 on the paintProggy function the self.clearArea of simba.writer, wich was giving a wrong box object, I didn't really tried to fix it, I gone like a barbare, just //-it to see what gonna happened, and PIFPOUFPATAPOUUUF, I do not have any progress report, but the script is running well now ! :D

Again, thanks to you guys ! You're amazing :)

Edit : Well am not the best english speaker, I try to improve everyday ! An example is better thant my explanations :

//smartImage.clearArea(chatBox.getBounds());    

That's all folks !

That's so strange ;-; glad you got it working at any rate lol

awesome script, alot better. ill post a proggy when im off work. already had a 8h run time great job :D!!!

From: IblashBho
awesome script, alot better. ill post a proggy when im off work. already had a 8h run time great job :D!!!

Thanks for the positive feedback :)

The script works great.

What benefit does having it run in DirectX offer? I can't seem to find that out anywhere.

From: buttdestroyr
The script works great.

What benefit does having it run in DirectX offer? I can't seem to find that out anywhere.

Atleast for me, it makes my pc lag less while playing other games at the same time.

From: buttdestroyr
The script works great.

What benefit does having it run in DirectX offer? I can't seem to find that out anywhere.

As far as this script is concerned, running in Direct-X mode eliminates the 'blank minimap' glitch that happens about 80% of the time you load a client in OpenGL mode. This script uses SPS for walking, so having a fully-functional minimap is essential.

From: Mantasx27
Atleast for me, it makes my pc lag less while playing other games at the same time.

This too–Direct-X mode boosts performance for some users.

Nice script runs nicely, only one problem…


Ran other RS3 scripts, and the RAM doesn't get near this high…

From: ineedbot
Nice script runs nicely, only one problem…


Ran other RS3 scripts, and the RAM doesn't get near this high…

Interesting, not sure why that would happen. I get 300-600k on average for a SMART client running this script.

Try restarting to clear RAM, or install a memory cleaner :)

From: KeepBotting
Interesting, not sure why that would happen. I get 300-600k on average for a SMART client running this script.

Try restarting to clear RAM, or install a memory cleaner :)

odd…as time ran it decreased…

Nice script again!

I had no idea how accurate SPS was, SPS for OSRS wasn't so great, and I never used it since, I may try make a script for RS3 sometime! :D

The script works flawless as advertised, getting 30k xp/h with 77 fishing, i'm harpooning.
It's a shame it doesn't have multiplayer though. :(

From: bevardis
The script works flawless as advertised, getting 30k xp/h with 77 fishing, i'm harpooning.
It's a shame it doesn't have multiplayer though. :(

It'd be relatively easy to add :D thank you for your positive feedback

Thanks for the script KeepBotting! I ran it for a while and it worked flawlessly. The last time I tried to run it it wouldn't detect my location. Maybe because I accidentally changed settings or something. ¯\_(^-^)_/¯

From: stocky8
Thanks for the script KeepBotting! I ran it for a while and it worked flawlessly. The last time I tried to run it it wouldn't detect my location. Maybe because I accidentally changed settings or something. ¯\_(^-^)_/¯

What do you mean, wouldn't detect? Did it say "unknown", because that's normal.

Thanks for the feedback :)

—- WARNING: TRSActionBar.__find(): Failed to find the bottom Y of the actionbar, most scripts should still function though
—— TRSActionBar.__find(): result = true (height = 306)
—— Dynamic interfaces have been set.
—- Client is ready.
—- Setup SRL in 94ms.
– setupSRL(): True
[DEBUG] : Successfully spawned SMART client.
– TPlayerArray.setup()
—- ERROR: Couldn't find army file(g0t)
– TPlayerArray.setup(): false

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
– TPlayer.logout()
tesseractGetText(): Bitmap is is too small (190, 1)
—- Waiting for login screen…
—- Waiting for login screen…
—- Waiting for login screen…
Exception in Script: Runtime error: "Access violation" at line 418, column 45 in file "C:\Simba\Includes\srl-6\lib\utilities\time.simba"
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (14-07-14 at 07.53.52 PM).txt] has not been freed in the script, freeing it now.
4
please help me

From: thebob142
—- WARNING: TRSActionBar.__find(): Failed to find the bottom Y of the actionbar, most scripts should still function though
—— TRSActionBar.__find(): result = true (height = 306)
—— Dynamic interfaces have been set.
—- Client is ready.
—- Setup SRL in 94ms.
– setupSRL(): True
[DEBUG] : Successfully spawned SMART client.
– TPlayerArray.setup()
—- ERROR: Couldn't find army file(g0t)
– TPlayerArray.setup(): false

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
– TPlayer.logout()
tesseractGetText(): Bitmap is is too small (190, 1)
—- Waiting for login screen…
—- Waiting for login screen…
—- Waiting for login screen…
Exception in Script: Runtime error: "Access violation" at line 418, column 45 in file "C:\Simba\Includes\srl-6\lib\utilities\time.simba"
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (14-07-14 at 07.53.52 PM).txt] has not been freed in the script, freeing it now.
4
please help me

ERROR: Couldn't find army file(g0t)

READ THAT LINK I POSTED!

From: The Mayor
ERROR: Couldn't find army file(g0t)

READ THAT LINK I POSTED!

——– Using plugins "d3d9.dll"
——– Succesfully spawned a client, attempting to target
———- smartSetAsTarget(): Succesfully set SMART[6876] as Simba's target
—— smartCreateClient(): result = true
—— Succesfully initialized via spawning a new client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…\
ALl i got was a spassy log in screen

From: tokoolman
——– Using plugins "d3d9.dll"
——– Succesfully spawned a client, attempting to target
———- smartSetAsTarget(): Succesfully set SMART[6876] as Simba's target
—— smartCreateClient(): result = true
—— Succesfully initialized via spawning a new client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…\
ALl i got was a spassy log in screen

You have to change your settings to DirectX as well. It's in graphic options on runescape.

i did that. Does it have to be the fixed screen option? if it does i cant even choose that for some reason. it says go to runescape website for more information!

Just used this script for 48hrs straight. Worked flawlessly. Only little idiosyncrasies it seemed to have were playing with the camera (north-south) a lot to get it just right and also spinning around (west-east/east-west) until it hit the perfect angle again sometimes. Not sure if this was antiban or just small issues. Regardless a truly amazing script.

From: tokoolman
i did that. Does it have to be the fixed screen option? if it does i cant even choose that for some reason. it says go to runescape website for more information!

There's nothing we can help you with–it's a problem with your graphics card or drivers. The plugins work fine.

From: coinhustla
Just used this script for 48hrs straight. Worked flawlessly. Only little idiosyncrasies it seemed to have were playing with the camera (north-south) a lot to get it just right and also spinning around (west-east/east-west) until it hit the perfect angle again sometimes. Not sure if this was antiban or just small issues. Regardless a truly amazing script.

That's actually intentional. The way I use SPS is highly temperamental when it comes to camera angles, so I've got to make sure the camera stays the same.
There are ways around it of course, but utilizing them would cut down on script stability.

One thing you can try is turn your camera sensitivity down and make sure you're on Classic camera mode (Esc > Game Settings > Controls).
That should reduce the amount of times the script has to screw around trying to get the camera back in place.

I ran Bonzai figher script on OpenGl and it worked fine? idk whats going on with this one? it still flashing!

From: tokoolman
I ran Bonzai figher script on OpenGl and it worked fine? idk whats going on with this one? it still flashing!

This is not bonsaiFighter, you cannot expect them to run in the same fashion. The flashing is caused when you run SMART using the DirectX plugin, but run RuneScape in OpenGL mode.

You must run this script using the DirectX plugin (done automatically, provided you've installed it correctly) and using the DirectX graphics mode (Esc > Game Settings > Graphics > Custom > DirectX).

If you can't get into DirectX mode, there's nothing more we can do for you–there's a problem with your graphics card or the drivers it's using.

This script runs beautifully. I've been able to run multiple characters for 4+ hours. With the update today, I've been unable to get it operating. Please update the script if an update is the issue!

From: yesjuice
This script runs beautifully. I've been able to run multiple characters for 4+ hours. With the update today, I've been unable to get it operating. Please update the script if an update is the issue!

The update broke SRL, not the script. After the devs get SRL running again, the script will work fine without any modifications.

there might be a memory leak somewhere in the code, using up like 1.7gb ram for some reason

From: toxjq
there might be a memory leak somewhere in the code, using up like 1.7gb ram for some reason

How long have you been running it? There have been other reports of the script using a massive amount of memory at first, but decreasing over time.

I'm unsure what's wrong on my part, I have everything set up like it should be, direct x plugin, karajma.png, etc.
I'm constantly getting, this though. My Player will move just fine from any point in between the banana trees, docks, etc, but it doesn't fish.

– WARNING: karamja.getPlayerPos(): Didn't find enough matches accurately calc your postion
– karamja.getPlayerPos(): result = {X = -1, Y = -1}, took 733 ms

From: tlumin
I'm unsure what's wrong on my part, I have everything set up like it should be, direct x plugin, karajma.png, etc.
I'm constantly getting, this though. My Player will move just fine from any point in between the banana trees, docks, etc, but it doesn't fish.

– WARNING: karamja.getPlayerPos(): Didn't find enough matches accurately calc your postion
– karamja.getPlayerPos(): result = {X = -1, Y = -1}, took 733 ms

A screenshot of your SMART client would be helpful.

From: KeepBotting
A screenshot of your SMART client would be helpful.

Sorry about that,

My RS3 custom settings
[ATTACH=CONFIG]23723[/ATTACH]

Script in action
[ATTACH=CONFIG]23724[/ATTACH]

From: tlumin
Sorry about that,

My RS3 custom settings
[ATTACH=CONFIG]23723[/ATTACH]

Script in action
[ATTACH=CONFIG]23724[/ATTACH]

The water on your minimap is wayyy too bright. It may have something to do with that fact that you've got "Ground blending" enabled in your graphics settings

Hello, I've recently tried to use your bot but when it gets to the login screen it starts to flicker with a please wait button in the corner which is also flickering. I'm fairly new to this kind of stuff and I'm wondering if you could assist me in my problem. If you can't that's perfectly fine, thank you.

From: Lukieboiz
Hello, I've recently tried to use your bot but when it gets to the login screen it starts to flicker with a please wait button in the corner which is also flickering. I'm fairly new to this kind of stuff and I'm wondering if you could assist me in my problem. If you can't that's perfectly fine, thank you.

Are your graphics settings configured correctly? This script requires DirectX, are you on OpenGL? Do you have the plugin for DirectX?

Tutorial can be found here: https://villavu.com/forum/showthread.php?t=47714

Hey guys, for some reason the script isn't showing the progress in the progress box, e.g. Lobsters: 0 Xp Gained: 0 etc. It does show Time Ran though. Other than that it works great but I'd like to see xp progress. Any suggestions as to why it doesn't show?

Edit: Oh and even though the Time Ran shows, it doesn't progress steadily. It jumps. Like it'll say Time Ran: 1 min for like 7 minutes then suddenly say Time Ran: 8 mins. If that helps with the diagnosis lol.

I added the directX file (and set on direct x in settings) and the picture of the map. i have ran a few previous scripts but this one i cant get to start. when i start this script and log in, my screen flickers and nothing happens. my simba just says that its waiting for RS to load. can anyone help me?

From: mikey5014
Hey guys, for some reason the script isn't showing the progress in the progress box, e.g. Lobsters: 0 Xp Gained: 0 etc. It does show Time Ran though. Other than that it works great but I'd like to see xp progress. Any suggestions as to why it doesn't show?

Edit: Oh and even though the Time Ran shows, it doesn't progress steadily. It jumps. Like it'll say Time Ran: 1 min for like 7 minutes then suddenly say Time Ran: 8 mins. If that helps with the diagnosis lol.

A screenshot of the SMART window always helps.

From: fedeed
I added the directX file (and set on direct x in settings) and the picture of the map. i have ran a few previous scripts but this one i cant get to start. when i start this script and log in, my screen flickers and nothing happens. my simba just says that its waiting for RS to load. can anyone help me?

You didn't install the plugin correctly. Go back and try it again.

From: KeepBotting
A screenshot of the SMART window always helps.


[ATTACH=CONFIG]23766[/ATTACH]
Here's a screenshot of the SMART window. Problem is the same. Bot is working flawlessly but no progress data is shown other than time.

From: mikey5014

From: KeepBotting
A screenshot of the SMART window always helps.


[ATTACH=CONFIG]23766[/ATTACH]
Here's a screenshot of the SMART window. Problem is the same. Bot is working flawlessly but no progress data is shown other than time.

Move your XP counter down to the chatbox like so

Still not working >.<[ATTACH=CONFIG]23767[/ATTACH]

From: mikey5014
Still not working >.<[ATTACH=CONFIG]23767[/ATTACH]

Weird. Is it counting your fish correctly down in the debug box?

karamja.getPlayerPos(): result = {X = 586, Y = 122}, took 327 ms
[DEBUG] : Our location is currently: dock
—- tabBackpack.countDTM(): Found no DTM matches
[DEBUG] : Counted 0 tuna.
—- tabBackpack.countDTM(): Found no DTM matches
[DEBUG] : Counted 0 swordfish.
—- tabBackpack.countDTM(): Found no DTM matches
[DEBUG] : Counted 0 lobsters.

You mean this? Nope.

From: mikey5014
karamja.getPlayerPos(): result = {X = 586, Y = 122}, took 327 ms
[DEBUG] : Our location is currently: dock
—- tabBackpack.countDTM(): Found no DTM matches
[DEBUG] : Counted 0 tuna.
—- tabBackpack.countDTM(): Found no DTM matches
[DEBUG] : Counted 0 swordfish.
—- tabBackpack.countDTM(): Found no DTM matches
[DEBUG] : Counted 0 lobsters.

You mean this? Nope.

Ooh maybe my DTM broke. I'll take a look at it later tonight.

Thanks for reporting this!

it sometimes cant detect stiles. once in a great great while though. i dunno what triggers it

From: hopesluck
it sometimes cant detect stiles. once in a great great while though. i dunno what triggers it

Can't find him on the screen? Does it hover over other objects? Does it register the location as 'stiles'?

—- Waiting while the player is moving…
– karamja.getPlayerPos(): result = {X = 262, Y = 278}, took 437 ms
– karamja.walkPath(): result = True
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…

[WARNING] : *** FATAL ERROR: Failed to handle walking!


[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
– TPlayer.logout()
tesseractGetText(): Bitmap is is too small (190, 1)
—- Waiting for login screen…
—- Waiting for login screen…
—- Waiting for login screen…
– TPlayer.logout(): True
[DEBUG] : Freeing BMPs
[DEBUG] : Freeing DTMs

[WARNING] : *** Terminated script ***

– Succesfully freed SMART[7764]
– Freeing gametabs bitmaps…
Successfully executed.

thats what it says when i have a full load and going to stiles. it stands right next to stiles and doesnt hover over anything.

From: hopesluck
—- Waiting while the player is moving…
– karamja.getPlayerPos(): result = {X = 262, Y = 278}, took 437 ms
– karamja.walkPath(): result = True
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…
—- Waiting while the player is moving…

[WARNING] : *** FATAL ERROR: Failed to handle walking!


[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
– TPlayer.logout()
tesseractGetText(): Bitmap is is too small (190, 1)
—- Waiting for login screen…
—- Waiting for login screen…
—- Waiting for login screen…
– TPlayer.logout(): True
[DEBUG] : Freeing BMPs
[DEBUG] : Freeing DTMs

[WARNING] : *** Terminated script ***

– Succesfully freed SMART[7764]
– Freeing gametabs bitmaps…
Successfully executed.

thats what it says when i have a full load and going to stiles. it stands right next to stiles and doesnt hover over anything.

Does it say "—- Waiting while the player is moving…" while you're standing still?

yes it does. it repeats that while its next to stiles. but it only happens when it actually clicks next to stiles instead of going past him a little like it usually does then right clicks exchange on him from there.

From: hopesluck
yes it does. it repeats that while its next to stiles. but it only happens when it actually clicks next to stiles instead of going past him a little like it usually does then right clicks exchange on him from there.

It shouldn't detect your player as moving if you're standing still…I'm testing my crafting script right now and it's working fine.

Screenshot of your SMART window please? Want to make sure your interfaces are correct. Iirc this script will basically run even if interfaces are off a bit, but .waitPlayerMoving() might be messing up.

---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
------ __setInputBoxes(): Set username and password boxes
---- TPlayer.loginToLobby()

Amazing script but I was watching a movie, when I come back got this message just click on the box to put my Username and Password and it worked again the script but how do i fix that when I'm afk? Sorry for my bad english

1h progg :)
[ATTACH=CONFIG]23827[/ATTACH]

From: Wiqkszon

---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
---- ERROR: TPlayer.loginToLobby(): Failed to find username and/or password box
------ __setInputBoxes(): Set username and password boxes
---- TPlayer.loginToLobby()

Amazing script but I was watching a movie, when I come back got this message just click on the box to put my Username and Password and it worked again the script but how do i fix that when I'm afk? Sorry for my bad english

1h progg :)
[ATTACH=CONFIG]23827[/ATTACH]

Were you kicked to Safe Mode upon client reload? That's been happening to me lately.

From: KeepBotting
Were you kicked to Safe Mode upon client reload? That's been happening to me lately.

No it keeps in DirectX Mode.

From: Wiqkszon
No it keeps in DirectX Mode.

Weird, shouldn't do that. It was probably an isolated incident, but tell me if it happens again.

From: KeepBotting
Weird, shouldn't do that. It was probably an isolated incident, but tell me if it happens again.

It happen again but now change the graphic settings to Safe Mode

From: Wiqkszon
It happen again but now change the graphic settings to Safe Mode

Yeah, see, I'm pretty sure that's the only thing that would cause it. Try clearing your jagexcache directory (in your home folder) and then running RS through runescape.com/game. Choose DirectX from there, the load SMART.

thanks for the script :D
XP might be bugged.

edit:
99 I'm coming for you!

From: lanadekat
thanks for the script :D
XP might be bugged.

Woah, that's an awesome proggy!

And yeah, reloading three times does tend to throw the xp tracker off a bit :)

From: KeepBotting
Woah, that's an awesome proggy!

And yeah, reloading three times does tend to throw the xp tracker off a bit :)

well I was heading for an awesome one like 90 hours, but update broke it :(
I mean sesion, not the script, I just had to restart the script.

From: lanadekat
well I was heading for an awesome one like 90 hours, but update broke it :(
I mean sesion, not the script, I just had to restart the script.

Oh yeah I get what you mean. Pretty sure this script is capable of ~90 hour runs, I'd like to see one :P go for it!

i cant do anything because of this ( Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]
File[C:\Simba\Includes\SRL-6/logs/SRL log (22-08-14 at 03.14.05 AM).txt] has not been freed in the script, freeing it now.)any help please?

nevermind i figured it out…i forgot to put the map in the img folder.

From: wendorf12213
i cant do anything because of this ( Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]
File[C:\Simba\Includes\SRL-6/logs/SRL log (22-08-14 at 03.14.05 AM).txt] has not been freed in the script, freeing it now.)any help please?

nevermind i figured it out…i forgot to put the map in the img folder.

I'm glad you were able to resolve the issue :)

Hello,

if i try to start the script, i allways get this messag :

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
File[E:\Simba\Includes\SRL-6/logs/SRL log (22-08-14 at 07.14.28 PM).txt] has not been freed in the script, freeing it now.

hope you know what to do, because i feel kinda stupid right now :D

EDIT: it just opens the documents folder

From: spinnaz
Hello,

if i try to start the script, i allways get this messag :

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
File[E:\Simba\Includes\SRL-6/logs/SRL log (22-08-14 at 07.14.28 PM).txt] has not been freed in the script, freeing it now.

hope you know what to do, because i feel kinda stupid right now :D

EDIT: it just opens the documents folder

You didn't install the map correctly. Re-read the instructions in the OP.

i ran into another small issue ( nothing that ruins usage ) the progy doesnt update until you trade the fish to the stile guy and it doesnt record how many fish you caught at all. other than that its an amazing script

From: wendorf12213
i ran into another small issue ( nothing that ruins usage ) the progy doesnt update until you trade the fish to the stile guy and it doesnt record how many fish you caught at all. other than that its an amazing script

The first part is intentional. What are you fishing that it's not counting correctly?

Thanks for your feedback :)

From: KeepBotting
The first part is intentional. What are you fishing that it's not counting correctly?

Thanks for your feedback :)

i mainly fish lobsters but every now and then ill do swords and tuna. also i dont know it its the script or my pc but it doesnt like going past an hour but theres a chance its my pc.

From: wendorf12213
i mainly fish lobsters but every now and then ill do swords and tuna. also i dont know it its the script or my pc but it doesnt like going past an hour but theres a chance its my pc.

So the script fails to count all three types of fish, or just lobsters?

& this script is fully capable of multiple 6-hour reloads so yeah it's probably your PC bringing runtimes down.

From: KeepBotting
So the script fails to count all three types of fish, or just lobsters?

& this script is fully capable of multiple 6-hour reloads so yeah it's probably your PC bringing runtimes down.

it seems to fail to read all of them but iim going to try again and see what i get.

update :1 if i set it to count swordfish it counts swordfish and tuna both. lobster still doesnt count tho.

From: wendorf12213
it seems to fail to read all of them but iim going to try again and see what i get.

update :1 if i set it to count swordfish it counts swordfish and tuna both. lobster still doesnt count tho.

Eh, my DTM must be broken. Good thing the script doesn't rely on it XD

From: KeepBotting
Eh, my DTM must be broken. Good thing the script doesn't rely on it XD

well ive got the script running normally and im getting exp so im happy lol i jujst thought id let you know about the bug :)

[DEBUG] : Player has been initalized.
– karamja.init()
—- Path exists (C:\Simba\Includes\SPS\img\karamja.png)
—- FATAL ERROR: karamja.setup(): Unable to load map or bitmap to map failed

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
—- TPlayer.logout()
tesseractGetText(): Bitmap is is too small (190, 1)
—— Waiting for login screen…
—— Waiting for login screen…
—— Waiting for login screen…
—— Waiting for login screen…
—- TPlayer.logout(): True
[DEBUG] : Freeing BMPs
Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13], 16]
File[C:\Simba\Includes\SRL-6/logs/SRL log (02-08-14 at 11.54.15 AM).txt] has not been freed in the script, freeing it now.

how can i fix this?

From: Cyanempire
[DEBUG] : Player has been initalized.
– karamja.init()
—- Path exists (C:\Simba\Includes\SPS\img\karamja.png)
—- FATAL ERROR: karamja.setup(): Unable to load map or bitmap to map failed

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
—- TPlayer.logout()
tesseractGetText(): Bitmap is is too small (190, 1)
—— Waiting for login screen…
—— Waiting for login screen…
—— Waiting for login screen…
—— Waiting for login screen…
—- TPlayer.logout(): True
[DEBUG] : Freeing BMPs
Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13], 16]
File[C:\Simba\Includes\SRL-6/logs/SRL log (02-08-14 at 11.54.15 AM).txt] has not been freed in the script, freeing it now.

how can i fix this?

It looks like you've installed the map correctly, but double-check to be sure. Try updating SPS. Make sure you don't have the map open anywhere else in the background.

After updating SPS

—- FATAL ERROR: karamja.setup(): Unable to load map or bitmap to map failed

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
—- TPlayer.logout()
tesseractGetText(): Bitmap is is too small (190, 1)
—— Waiting for login screen…
—— Waiting for login screen…
—— Waiting for login screen…
—- TPlayer.logout(): True
[DEBUG] : Freeing BMPs
Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13], 16]
File[C:\Simba\Includes\SRL-6/logs/SRL log (02-08-14 at 12.13.57 PM).txt] has not been freed in the script, freeing it now.

Should the map be .png? because thats what i get when i Download it.

From: Cyanempire
After updating SPS

—- FATAL ERROR: karamja.setup(): Unable to load map or bitmap to map failed

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
—- TPlayer.logout()
tesseractGetText(): Bitmap is is too small (190, 1)
—— Waiting for login screen…
—— Waiting for login screen…
—— Waiting for login screen…
—- TPlayer.logout(): True
[DEBUG] : Freeing BMPs
Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13], 16]
File[C:\Simba\Includes\SRL-6/logs/SRL log (02-08-14 at 12.13.57 PM).txt] has not been freed in the script, freeing it now.

Should the map be .png? because thats what i get when i Download it.

Yeah it's a png. Where did you install Simba? I believe it has to be installed in C:/Simba/ for plugins (SPS) to work properly

I installed it in that exact place. its weird because i can run your other scripts like the flyfisher.
i also updated everything Plugins,extentions,srl,sps

Any solution to this?

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
File[D:\Simba\Includes\SRL-6/logs/SRL log (25-08-14 at 07.34.39 PM).txt] has not been freed in the script, freeing it now.

I've got karamja.png in SPS/img, I don't know what could be going wrong…

Edit : I've actually gotten past this! However I'm a little lost…

When I run the script, another RS opens up. This window of RuneScape doesn't do much once I've logged in? I don't know how to make the script actually start working.

I've tried restarting the script as well, no luck.

From: Ryuzaki
Any solution to this?

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
File[D:\Simba\Includes\SRL-6/logs/SRL log (25-08-14 at 07.34.39 PM).txt] has not been freed in the script, freeing it now.

I've got karamja.png in SPS/img, I don't know what could be going wrong…

Edit : I've actually gotten past this! However I'm a little lost…

When I run the script, another RS opens up. This window of RuneScape doesn't do much once I've logged in? I don't know how to make the script actually start working.

I've tried restarting the script as well, no luck.

Install Simba in C:/Simba/ (just move the folder). sps*.dll freaks out when the include paths aren't in C:/.

From: KeepBotting
Install Simba in C:/Simba/ (just move the folder). sps*.dll freaks out when the include paths aren't in C:/.

Already did this, which was precisely why it let me open the window of RS, however now it won't start autofishing. How do I trigger it?

From: Ryuzaki
Already did this, which was precisely why it let me open the window of RS, however now it won't start autofishing. How do I trigger it?

Did you restart Simba after moving the directories?

From: KeepBotting
Did you restart Simba after moving the directories?

Indeed, no luck however.

It's not so much that I can't get the window of RuneScape open, I just don't know how to make it start autofishing…

From: Ryuzaki
Indeed, no luck however.

It's not so much that I can't get the window of RuneScape open, I just don't know how to make it start autofishing…

Tried pressing the big green play button? :P what does the debug say after you do that?

You mean this?

[DEBUG] : Appended procedure scriptTerminate to shutdown.
[DEBUG] : Setting up SRL…
[DEBUG] : Spawning SMART client…
– setupSRL()
—- Setting up SRL…
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found no free clients to pair to
—— smartPairToExistingClient(): result = false
—— Attempting to spawn a new client..
—— smartCreateClient():
———- smartGetParameters(): Succesfully grabbed paramters
——– getJavaPath():
———- Attempting to search for your Java path
———- Found your java path @ C:\Program Files (x86)\Java\jre7\bin\javaw.exe
——– getJavaPath()
——– Using parameters [Censored because I can't post links yet, f37923864583555268]
——– Using plugins "d3d9.dll"
——– Succesfully spawned a client, attempting to target
———- smartSetAsTarget(): Succesfully set SMART[14644] as Simba's target
—— smartCreateClient(): result = true
—— Succesfully initialized via spawning a new client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…
—- 1 minute(s) have passed, client is not ready yet
—- 2 minute(s) have passed, client is not ready yet
—- 3 minute(s) have passed, client is not ready yet
New window: 65552
—- 4 minute(s) have passed, client is not ready yet

Uhm, debug? You mean the code that appears at the bottom? xD

Also, simply running the script doesn't seem to do me any good.

From: Ryuzaki
Uhm, debug? You mean the code that appears at the bottom? xD

Also, simply running the script doesn't seem to do me any good.

Yeah, that bit. What's it spit out when you try to run the script?

[DEBUG] : Appended procedure scriptTerminate to shutdown.
[DEBUG] : Setting up SRL…
[DEBUG] : Spawning SMART client…
– setupSRL()
—- Setting up SRL…
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found 1 free client(s), attempting to pair to one…
———- smartSetAsTarget(): Succesfully set SMART[14644] as Simba's target
——– Succesfully paired to a existing client, SMART[14644]
—— smartPairToExistingClient(): result = true
—— Succesfully initialized via pairing to a previously spawned client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…

From: Ryuzaki
[DEBUG] : Appended procedure scriptTerminate to shutdown.
[DEBUG] : Setting up SRL…
[DEBUG] : Spawning SMART client…
– setupSRL()
—- Setting up SRL…
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found 1 free client(s), attempting to pair to one…
———- smartSetAsTarget(): Succesfully set SMART[14644] as Simba's target
——– Succesfully paired to a existing client, SMART[14644]
—— smartPairToExistingClient(): result = true
—— Succesfully initialized via pairing to a previously spawned client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…

You don't have your graphics setup correctly. Reread the SRL-6 setup tutorial

Created account, which I seemed to have been lacking. Filled out appropriate information. Still not having any lucky, here's what I get.

[DEBUG] : Appended procedure scriptTerminate to shutdown.
[DEBUG] : Setting up SRL…
[DEBUG] : Spawning SMART client…
– setupSRL()
—- Setting up SRL…
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found 1 free client(s), attempting to pair to one…
———- smartSetAsTarget(): Succesfully set SMART[4876] as Simba's target
——– Succesfully paired to a existing client, SMART[4876]
—— smartPairToExistingClient(): result = true
—— Succesfully initialized via pairing to a previously spawned client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (25-08-14 at 10.42.06 PM).txt] has not been freed in the script, freeing it now.

Is it still this SRL stuff?

Edit : By SRL, do you mean like my runescape graphics? Because I've set them up the way the tutorial explained. Minimum graphics, fixed screen, direct something something, old school style.

Something I've been having trouble with is player profiles. I set one up, however it keeps giving me errors when I wish to save it. I figured out that it was attempting to save the profile to the wrong folder, and it's in my Players folder, however the rafiki player manager doesn't seem to pick that up, and instead goes straight to scripts.

– karamja.init()
—- Path exists (C:\Simba\Includes\SPS\img\karamja.png)
—- FATAL ERROR: karamja.setup(): Unable to load map or bitmap to map failed

From: Ryuzaki
Created account, which I seemed to have been lacking. Filled out appropriate information. Still not having any lucky, here's what I get.

[DEBUG] : Appended procedure scriptTerminate to shutdown.
[DEBUG] : Setting up SRL…
[DEBUG] : Spawning SMART client…
– setupSRL()
—- Setting up SRL…
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found 1 free client(s), attempting to pair to one…
———- smartSetAsTarget(): Succesfully set SMART[4876] as Simba's target
——– Succesfully paired to a existing client, SMART[4876]
—— smartPairToExistingClient(): result = true
—— Succesfully initialized via pairing to a previously spawned client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Exception in Script: Runtime error: "The bitmap[0] does not exist" at line 3842, column 12
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (25-08-14 at 10.42.06 PM).txt] has not been freed in the script, freeing it now.

Is it still this SRL stuff?

Edit : By SRL, do you mean like my runescape graphics? Because I've set them up the way the tutorial explained. Minimum graphics, fixed screen, direct something something, old school style.

Something I've been having trouble with is player profiles. I set one up, however it keeps giving me errors when I wish to save it. I figured out that it was attempting to save the profile to the wrong folder, and it's in my Players folder, however the rafiki player manager doesn't seem to pick that up, and instead goes straight to scripts.

U got the directx plugin and set rs3 to directx mode?
if you don't have it you can download it here:
https://villavu.com/forum/showthread.php?t=107256

From: Cyanempire
– karamja.init()
—- Path exists (C:\Simba\Includes\SPS\img\karamja.png)
—- FATAL ERROR: karamja.setup(): Unable to load map or bitmap to map failed

try to delete C:\Simba\Includes\SPS\img\karamja.png the script will automaticly download it again.

From: lanadekat
U got the directx plugin and set rs3 to directx mode?
if you don't have it you can download it here:
https://villavu.com/forum/showthread.php?t=107256


try to delete C:\Simba\Includes\SPS\img\karamja.png the script will automaticly download it again.

Is it necessary to download if I'm already in DirectX mode?

From: Ryuzaki
Is it necessary to download if I'm already in DirectX mode?

Yes
Place it in C:\Simba\Plugins

From: lanadekat
Yes
Place it in C:\Simba\Plugins

No luck, I just downloaded the file and plopped it into my plugins folder.

Everything seems to be loading up fine, and I'm making sure to select the RuneScape window before running the script. The final message I get is "Waiting up to 5 minutes for RS to load…", then the script powers off after 5 minutes.

From: Ryuzaki
No luck, I just downloaded the file and plopped it into my plugins folder.

Everything seems to be loading up fine, and I'm making sure to select the RuneScape window before running the script. The final message I get is "Waiting up to 5 minutes for RS to load…", then the script powers off after 5 minutes.

u're sure you got the right settings?
direct-X instead of openGL in setting.

From: lanadekat
u're sure you got the right settings?
direct-X instead of openGL in setting.

Woohoo! It's fixed! I checked my settings and it was on DirectX, I reset it, ran the script, and it worked perfectly! Thanks a ton!

Now, how do I get the iKaramjaFisher XP logger thingy to show up? xD It just says "Please wait…"

From: Ryuzaki
Woohoo! It's fixed! I checked my settings and it was on DirectX, I reset it, ran the script, and it worked perfectly! Thanks a ton!

Now, how do I get the iKaramjaFisher XP logger thingy to show up? xD It just says "Please wait…"

just wait a bit it.
I think It comes up after a few min or after the first time noting at stiles , I'm not sure.
Make sure you got the total xp thingy at the right spot:
And the xp / fish counter doesn't work when fishing lobsters, it work fine when fishing swordies and tuna's

[ATTACH=CONFIG]23909[/ATTACH]

From: lanadekat
just wait a bit it.
I think It comes up after a few min or after the first time noting at stiles , I'm not sure.
Make sure you got the total xp thingy at the right spot:
And the xp / fish counter doesn't work when fishing lobsters, it work fine when fishing swordies and tuna's

You are a saint, my friend! :P

From: lanadekat
just wait a bit it.
I think It comes up after a few min or after the first time noting at stiles , I'm not sure.
Make sure you got the total xp thingy at the right spot:
And the xp / fish counter doesn't work when fishing lobsters, it work fine when fishing swordies and tuna's

Thanks for the help :)

From: Cyanempire
[ATTACH=CONFIG]23909[/ATTACH]

Thanks for the proggy :)

From: Ryuzaki
You are a saint, my friend! :P

Glad you got it working :)

*edit* nvrm im not a smart man.. I googled my issue lol I found the solution.

From: OriginalGM
*edit* nvrm im not a smart man.. I googled my issue lol I found the solution.

Glad you figured it out :)

From: KeepBotting
Glad you figured it out :)

thanks. bro. hey I got a question. I remember back in 2012 I was searching google about RS and I stumbled upon a runescape wiki page with all the equations that jagex uses to determine things in the game. im trying to find it again but it seems like they covered that up since rs3 and don't want nobody to know lol. but essentially im trying to figure out at what levels does fishing lobbys, swordys and sharks become faster

From: OriginalGM
thanks. bro. hey I got a question. I remember back in 2012 I was searching google about RS and I stumbled upon a runescape wiki page with all the equations that jagex uses to determine things in the game. im trying to find it again but it seems like they covered that up since rs3 and don't want nobody to know lol. but essentially im trying to figure out at what levels does fishing lobbys, swordys and sharks become faster

As far as I know, they've only released their combat formulas and max hit formulas. Any page you saw with resource gathering formulas was probably speculative.

i finally got my 99 with this script =)

Solid Script, Will post my proggy once it gets long enough!

Thats my proggy so far

Got banned using this ( the suicide way )
got 96 fishing, great script xD But don't try 24/7.

Great work.
Progress Report:

Great job with this script!

Progress:

My proggy so far… Great script

From: hopesluck
i finally got my 99 with this script =)

From: acezfate
Solid Script, Will post my proggy once it gets long enough!

From: Large1
Thats my proggy so far

From: lanadekat
Got banned using this ( the suicide way )
got 96 fishing, great script xD But don't try 24/7.

From: pek
Great job with this script!

Progress:

From: Large1
My proggy so far… Great script

Thanks for all the feedback & proggies :) <3

lobsters dont show up in proggy but ive got around 14k

From: OriginalGM

lobsters dont show up in proggy but ive got around 14k

Yeah lobster counting is broken, but that doesn't affect the script at all so I've not bothered to fix it yet.

Hey I've been getting this error, any help would be fantastic.

Exception in Script: Expected variable of type "array of AnsiString", got "array [0..0] of AnsiChar" at line 101, column 17 at line 101, column 18

From: Nihility
Hey I've been getting this error, any help would be fantastic.

Exception in Script: Expected variable of type "array of AnsiString", got "array [0..0] of AnsiChar" at line 101, column 17 at line 101, column 18

You removed the '' on one of the settings. Put 'em back.

From: KeepBotting
You removed the '' on one of the settings. Put 'em back.

This unedited section from line 101?

players.setup(playerNames, playerFile);

or one of

program iKaramjaFisher;
{$define smart}
{$i srl-6/srl.simba}
{$i sps/lib/sps-rs3.simba}
{$define debug_on} //comment this line to disable script debug/warning/error messages

///////////////////////////////////Start setting up the script here. Refer to the comments if you don't know what you're doing.
///////////////////////////////////
///// Start Setup ///////
///////////////////////////////////
///////////////////////////////////Start setting up the script here. Refer to the comments if you don't know what you're doing.

const
(* player info *)
playerNames = ['N']; //Put your player's name (or nickname, if you set one) here.
playerFile = 'default'; //Put your playerfile's name here. Default is 'default'.
desiredWorld = 108; //Enter your desired world number here. 0 for random.

(* globals *)
fishType = 'swordfish'; //Lobster, swordfish, tuna

(* options *) //these will need adjusted based on your fishing level
//they're in seconds, NOT milliseconds
minWait = 8; //MIN wait for catching a fish, make this HIGHER if it waits too SHORT (clicking on another spot while still fishing)
maxWait = 16; //MAX wait for catching a fish, make this LOWER if it waits too LONG (doing nothing for a long time after spot is gone)

minMouseSpeed = 15; //MIN speed at which to move the mouse
//Default values for these should be just fine. If you must change, lower = slower, higher = faster
maxMouseSpeed = 20; //MAX speed at which to move the mouse

///////////////////////////////////Don't modify the script ANY FURTHER unless you know what you're doing. You could break stuff!
///////////////////////////////////
///// Stop Setup ///////
///////////////////////////////////
///////////////////////////////////Don't modify the script ANY FURTHER unless you know what you're doing. You could break stuff!

Thanks for the prompt reply I really appreciate you helping out a noob like me.

I think its more likely you messed something up on your player settings since it looks like its saying its receiving an array of size 0 (or a null array? don't know about this scripting language). You probably left one of the fields blank. Otherwise redownload the script.

edit: changed wording

A setting in rafiki you mean?

Ah, yes. I'm still not up to date with the terminology for these.

From: Nihility
A setting in rafiki you mean?

Yeah, if it's not the quotation marks then he's right, go back to Rafiki and make sure you've filled out all the fields.

Proggy for you :) Still running btw, I just know that I'll forget to do it later if I don't do it now.
[ATTACH=CONFIG]23980[/ATTACH]

Just curious (for anyone using this), does fishing swords/tuna or lobbies make more money per hour?

Solid 5 hour proggy, great script![ATTACH=CONFIG]23982[/ATTACH]

From: ibot101
Proggy for you :) Still running btw, I just know that I'll forget to do it later if I don't do it now.
[ATTACH=CONFIG]23980[/ATTACH]

Just curious (for anyone using this), does fishing swords/tuna or lobbies make more money per hour?

In my experience they make about the same per hour, but that may have changed since I wrote it.

From: Jonte20
Solid 5 hour proggy, great script![ATTACH=CONFIG]23982[/ATTACH]

Thanks!

Not sure what this means? can you help me please
Error: The bitmap[0] does not exist at line 3842
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (12-10-14 at 05.39.52 PM).txt] has not been freed in the script, freeing it now.

From: KimJongPoon
Not sure what this means? can you help me please
Error: The bitmap[0] does not exist at line 3842
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (12-10-14 at 05.39.52 PM).txt] has not been freed in the script, freeing it now.

Make sure Simba is installed in C:/Simba/
Make sure you've installed the SPS map correctly

From: KeepBotting
Make sure Simba is installed in C:/Simba/
Make sure you've installed the SPS map correctly

i did put the map in c:/simba/includes/sps/img
but still it doesn't work


i always get this:
[DEBUG] : Appended procedure scriptTerminate to shutdown.
[DEBUG] : Setting up SRL…
[DEBUG] : Spawning SMART client…
SRL: Logfile = C:\Simba\Includes\SRL-6/logs/SRL log (17-10-14 at 01.03.01 PM).txt
– setupSRL()
—- Setting up SRL…
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found no free clients to pair to
—— smartPairToExistingClient(): result = false
—— Attempting to spawn a new client..
—— smartCreateClient():
———- smartGetParameters(): Succesfully grabbed paramters
——– getJavaPath():
———- Attempting to search for your Java path
———- Found your java path @ C:\Program Files (x86)\Java\jre7\bin\javaw.exe
——– getJavaPath()
——– Using parameters [http://world5.runescape.com/, f5332992183203002308]
——– Using plugins "d3d9.dll"
——– Succesfully spawned a client, attempting to target
———- smartSetAsTarget(): Succesfully set SMART[4604] as Simba's target
—— smartCreateClient(): result = true
—— Succesfully initialized via spawning a new client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…
—— __setInputBoxes(): Set username and password boxes
—- Client is ready.
—- Setup SRL in 18 Seconds
– setupSRL(): True
[DEBUG] : Successfully spawned SMART client.
– TPlayerArray.setup()
—- Attempting to load player(s) "[]" from army ""
—- Raf_GetPlayers()
—— WARNING: Army doesn't exist!
—- Raf_GetPlayers: Result = false
—- ERROR: Unable to get players from army
—- FATAL ERROR: TPlayerArray.setup(): Failure

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3842
Execution failed.

From: gawain
i did put the map in c:/simba/includes/sps/img
but still it doesn't work


i always get this:
[DEBUG] : Appended procedure scriptTerminate to shutdown.
[DEBUG] : Setting up SRL…
[DEBUG] : Spawning SMART client…
SRL: Logfile = C:\Simba\Includes\SRL-6/logs/SRL log (17-10-14 at 01.03.01 PM).txt
– setupSRL()
—- Setting up SRL…
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found no free clients to pair to
—— smartPairToExistingClient(): result = false
—— Attempting to spawn a new client..
—— smartCreateClient():
———- smartGetParameters(): Succesfully grabbed paramters
——– getJavaPath():
———- Attempting to search for your Java path
———- Found your java path @ C:\Program Files (x86)\Java\jre7\bin\javaw.exe
——– getJavaPath()
——– Using parameters [http://world5.runescape.com/, f5332992183203002308]
——– Using plugins "d3d9.dll"
——– Succesfully spawned a client, attempting to target
———- smartSetAsTarget(): Succesfully set SMART[4604] as Simba's target
—— smartCreateClient(): result = true
—— Succesfully initialized via spawning a new client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…
—— __setInputBoxes(): Set username and password boxes
—- Client is ready.
—- Setup SRL in 18 Seconds
– setupSRL(): True
[DEBUG] : Successfully spawned SMART client.
– TPlayerArray.setup()
—- Attempting to load player(s) "[]" from army ""
—- Raf_GetPlayers()
—— WARNING: Army doesn't exist!
—- Raf_GetPlayers: Result = false
—- ERROR: Unable to get players from army
—- FATAL ERROR: TPlayerArray.setup(): Failure

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3842
Execution failed.

balls… fixed it on my own :D got a typo in my player files -.-

From: gawain
balls… fixed it on my own :D got a typo in my player files -.-

I'm glad it's working for you! Please post proggies & report any issues!

From: KeepBotting
I'm glad it's working for you! Please post proggies & report any issues!

sorry don't have any proggies screened >.<
but i didn't have any serious issues, so i made 99 in a week :D
thank you very much, it's an awesome script ^^

From: gawain
sorry don't have any proggies screened >.<
but i didn't have any serious issues, so i made 99 in a week :D
thank you very much, it's an awesome script ^^

Quite welcome. Gz on the 99~!

What rs interface should i use? Because the program cant click "continue" when i accomplish a task. I mean the message that pops up on the screen.


EDIT: Nevermind, i disabled the messages :)

From: Ixecube
What rs interface should i use? Because the program cant click "continue" when i accomplish a task. I mean the message that pops up on the screen.


EDIT: Nevermind, i disabled the messages :)

Not sure what messages you mean, but I'm glad you resolved the issue yourself.

For future reference, if you suspect you have any interface-based problems, check to make sure you've set up RS like is detailed in this thread: https://villavu.com/forum/showthread.php?t=47714

I disbabled the messages in the Runescape settings. It is running 100% smooth now. Although it automaticly logged out after 6 hours last night. I'm already up 9 levels :) Thanks a lot!

Hello! I had a proggy of 4 hours harpooning at 95 fishing. Script runs very smooth and I manually stopped the script. Thank you very much! Hopefully I'll get 96 fishing today, 700k exp to go!

From: kozak94
Hello! I had a proggy of 4 hours harpooning at 95 fishing. Script runs very smooth and I manually stopped the script. Thank you very much! Hopefully I'll get 96 fishing today, 700k exp to go!

lol if you had a proggy why not post it :P

good luck

Oh! I looked at it and then closed simba and the thought of saving the proggy occurred after I closed simba.

Mate you should add a power fishing feature! I'd love to use this and build an army.

From: P1nky
Mate you should add a power fishing feature! I'd love to use this and build an army.

Yeah I'll try to add that later today. Won't be that hard, but this script wasn't exactly designed with future upgrade-ability in mind :P

Edit: Updated!

It would be interesting to have an option to Net fish and drop them, so someone could go from 1->99 using just this script :)

Also, should consider left-clicking if you're doing lobsters, since like no one right clicks to choose the first option.

From: Harry
It would be interesting to have an option to Net fish and drop them, so someone could go from 1->99 using just this script :)

Also, should consider left-clicking if you're doing lobsters, since like no one right clicks to choose the first option.

Those are both very great ideas. I'll implement them in the next version. Thanks for the feedback!

[DEBUG] : Appended procedure scriptTerminate to shutdown.
[DEBUG] : Setting up SRL…
[DEBUG] : Spawning SMART client…
SRL: Logfile = C:\Simba\Includes\SRL-6/logs/SRL log (07-11-14 at 01.37.42 PM).txt
– setupSRL()
—- Setting up SRL…
—- attempting to spawn smart, attempt #: 1
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found 1 free client(s), attempting to pair to one…
———- smartSetAsTarget(): Succesfully set SMART[14672] as Simba's target
——– Succesfully paired to a existing client, SMART[14672]
—— smartPairToExistingClient(): result = true
—— Succesfully initialized via pairing to a previously spawned client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…
—— TRSActionBar.__findButton(): Found the actionbar button @ {X = 566, Y = 315}
—— TRSActionBar.__find(): result = true (height = 75)
—— Dynamic interfaces have been set.
—- Client is ready.
—- Setup SRL in 0 Seconds
– setupSRL(): True
[DEBUG] : Successfully spawned SMART client.
– TPlayerArray.setup()
—- Attempting to load player(s) "[mac]" from army "promacbae"
—- Raf_GetPlayers()
—— Army exists, reading the players…
—- Raf_GetPlayers: Result = True
—- Loaded player: mac
– TPlayerArray.setup(): Success
[DEBUG] : Setting up players…
[DEBUG] : Successfully defined player arrays - logging in.
– TPlayer.login()
—- Already logged in
—- Logged in: mac
– TPlayer.login(): True
[DEBUG] : Setup complete - player is logged in.
[DEBUG] : Setting camera.
—- minimap.mouseOffCompass(): Succesfully moved mouse off of compass
—- TRSMinimap.clickCompass(): Clicked compass
[DEBUG] : Setting run.
[DEBUG] : Setting gametab.
—- TRSGameTab.__initTabs(): Setup gametab properties
[DEBUG] : Player has been initalized.
– karamja.init()
—- Path exists (C:\Simba\Includes\SPS\img\karamja.png)
—- Setup area "karamja" in 47ms
– karamja.init()
[DEBUG] : Map has been initalized.
[DEBUG] : Paths have been initalized.
[DEBUG] : Colors have been initalized.
[DEBUG] : DTMs have been initalized.
[DEBUG] : BMPs have been initalized.
—- tabBackpack.countDTM(): Found no DTM matches
[DEBUG] : Counted 0 tuna.
—- tabBackpack.countDTM(): Found no DTM matches
[DEBUG] : Counted 0 swordfish.
—- tabBackpack.countDTM(): Found no DTM matches
[DEBUG] : Counted 0 lobsters.
– WARNING: karamja.getPlayerPos(): Didn't find enough matches accurately calc your postion
– karamja.getPlayerPos(): result = {X = -1, Y = -1}, took 547 ms
– WARNING: karamja.getPlayerPos(): Didn't find enough matches accurately calc your postion
– karamja.getPlayerPos(): result = {X = -1, Y = -1}, took 531 ms

[WARNING] : Failed to walk to: !


[ERROR] : *** FATAL ERROR: Failed to handle walking!


[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
– TPlayer.logout()
—- Waiting for login screen…
—- Waiting for login screen…
—- Waiting for login screen…
– TPlayer.logout(): True
[DEBUG] : Freeing BMPs
[DEBUG] : Freeing DTMs

[WARNING] : *** Terminated script ***

– Succesfully freed SMART[14672]
– Freeing gametabs bitmaps…
Successfully executed.

Always terminating the script.

From: onilika
*snip*

Always terminating the script.

Use CODE tags next time please!

Post a screenshot of your SMART window. (my aim here is to see if you've got Ground Blending turned on, another user had this problem & that was the source)

Problem solved. And sorry, did not found the CODE tags. And I thought I had used the QUOTE one..
just started fishing at the docks, and the script continued from there..

Failed to initialise the interpreter: Thread creation error.

):

From: xSorrels
Failed to initialise the interpreter: Thread creation error.

):

go to Script > Interpreter and make sure you're on Lape, not PascalScript

From: onilika
Problem solved. And sorry, did not found the CODE tags. And I thought I had used the QUOTE one..
just started fishing at the docks, and the script continued from there..

Glad you got it working :)

From: KeepBotting

Glad you got it working :)

Now next thing to do is to add the cooking method to the script and then go to stiles and note it :p

From: KeepBotting
go to Script > Interpreter and make sure you're on Lape, not PascalScript

Definitely did that. Not sure of the issue.

From: xSorrels
Definitely did that. Not sure of the issue.

Are you able to run other SRL6 scripts? What Simba version are you running (should be 1100). Try updating SRL.

From: KeepBotting
Are you able to run other SRL6 scripts? What Simba version are you running (should be 1100). Try updating SRL.

Yes, have been using the hell out f Ashamans scripts. Nonstop.

Getting this now.

Error: Out of memory
Compiling failed.

From: xSorrels
Yes, have been using the hell out f Ashamans scripts. Nonstop.

Getting this now.

Out of memory? =O

How much free RAM do you have? Try restarting Simba, and maybe even using a separate instance (e.g. don't run this script in a new tab, run it in a new Simba).

From: KeepBotting
Out of memory? =O

How much free RAM do you have? Try restarting Simba, and maybe even using a separate instance (e.g. don't run this script in a new tab, run it in a new Simba).

Lmao, trust me. Ive tried it all. Tried cleaning disk', restarting computer, reinstalling SRL/Simba.

): SRL doesnt like me.

EDIT:

Completely commented out lines 3839 through 3852.

{procedure scriptTerminate();
begin
 writeWarn('*** Terminating script ***');
 writeDebug('Logging out');
  if isLoggedIn() then
   players[currentPlayer].logout();
 writeDebug('Freeing BMPs');                                //COMMENTED OUT!
 freeBitmap(proggyBmp);
 writeDebug('Freeing DTMs');
 freeDtm(dtmArr[0]);
 freeDtm(dtmArr[1]);
 freeDtm(dtmArr[2]);
 writeWarn('*** Terminated script ***');
end;     } 

Please make me aware if this is not okay/unsafe.

Thanks again KeepBotting.

From: xSorrels
Lmao, trust me. Ive tried it all. Tried cleaning disk', restarting computer, reinstalling SRL/Simba.

): SRL doesnt like me.

EDIT:

Completely commented out lines 3839 through 3852.

{procedure scriptTerminate();
begin
 writeWarn('*** Terminating script ***');
 writeDebug('Logging out');
  if isLoggedIn() then
   players[currentPlayer].logout();
 writeDebug('Freeing BMPs');                                //COMMENTED OUT!
 freeBitmap(proggyBmp);
 writeDebug('Freeing DTMs');
 freeDtm(dtmArr[0]);
 freeDtm(dtmArr[1]);
 freeDtm(dtmArr[2]);
 writeWarn('*** Terminated script ***');
end;     } 

Please make me aware if this is not okay/unsafe.

Thanks again KeepBotting.

That's really weird - and yeah that's unsafe if you plan on letting the script run for very long periods of time. Could cause memory leaks. Not a huge deal though.

Came home today and I was still fishing!

Awesome.

Thanks KeeyBotting!

:spot::spot:

I love this script so far, but I have some further suggestions
Breaks, and an option to stop the script after the given time
Drop tunas, keep swordfishes
If you implement these, an SPF would be great

+While walking to Stiles, the mouse clicks on the minimap even when Stiles is on the mainscreen. You should check that.

From: xSorrels
Came home today and I was still fishing!

Awesome.

Thanks KeeyBotting!

:spot::spot:

Sweet. Thanks for the proggy.

From: Torol
I love this script so far, but I have some further suggestions
Breaks, and an option to stop the script after the given time
Drop tunas, keep swordfishes
If you implement these, an SPF would be great

+While walking to Stiles, the mouse clicks on the minimap even when Stiles is on the mainscreen. You should check that.

Not adding breaks, they're useless imo.
Adding a timed shutdown would be easy, just start a global TTimeMarker in initScript() and call terminateScript() conditionally in the mainloop (yourMom()). Not worth pushing an entire update for.
Dropping tuna is a good idea, might think about doing that.
I don't know what an SPF is.

Clicking on the minimap while Stiles in on the screen is a failsafe, not a bug. It's intentional.

Thanks for the feedback! :)

From: KeepBotting

Not adding breaks, they're useless imo.
Adding a timed shutdown would be easy, just start a global TTimeMarker in initScript() and call terminateScript() conditionally in the mainloop (yourMom()). Not worth pushing an entire update for.
Dropping tuna is a good idea, might think about doing that.
I don't know what an SPF is.

Clicking on the minimap while Stiles in on the screen is a failsafe, not a bug. It's intentional.

Thanks for the feedback! :)

Your welcome! :)
SRL Player Form - if you expand the options it would be more user-friendly

From: KeepBotting
Sweet. Thanks for the proggy.


Not adding breaks, they're useless imo.

Man, breaks are OP.

Since adding breaks to my scripts, banrates have dropped to 0%.

Should add them, they're not hard.


i can send you my break include thing if you ever decide to support breaks. :')

From: Torol
Your welcome! :)
SRL Player Form - if you expand the options it would be more user-friendly

Won't be adding a form either - I personally dislike them and think they detract from the aesthetic of an SRL script.

Sorry if it seems like I'm denying all your suggestions. It's just that most of the things you've suggested, I've already gone over and decided not to include.

From: NKN
Man, breaks are OP.

Since adding breaks to my scripts, banrates have dropped to 0%.

Should add them, they're not hard.


i can send you my break include thing if you ever decide to support breaks. :')

Sure. I'm not against adding them, but they've never proved useful in my experience.

From: KeepBotting
Out of memory? =O

How much free RAM do you have? Try restarting Simba, and maybe even using a separate instance (e.g. don't run this script in a new tab, run it in a new Simba).

That also happens to me. Just need to restart Simba and that's all :)

From: KeepBotting
Won't be adding a form either - I personally dislike them and think they detract from the aesthetic of an SRL script.

Sorry if it seems like I'm denying all your suggestions. It's just that most of the things you've suggested, I've already gone over and decided not to include.


Sure. I'm not against adding them, but they've never proved useful in my experience.

In that case…I just botted 14 hours straight.. ouch

From: onilika
That also happens to me. Just need to restart Simba and that's all :)
In that case…I just botted 14 hours straight.. ouch

Me and others have botted a lot longer than that using this script and never have any problems. You're fine :P

I've suicided my ironman account since day 1. I've been botting non-stop, turning off all breaks on my main as well for about 3-4 months now. AINT SCARED.

On a side note, I went from 40-47 very smoothly with the script so far, will post some proggies when I get some worth posting. :) 17k an hour cuz of low fishing level isn't worth it :P

BUG:

Antipattern hovers over SKILL_HUNTER of SKILL_FISHING.

And its not hoverRandomSkill();

From: cbrems
I've suicided my ironman account since day 1. I've been botting non-stop, turning off all breaks on my main as well for about 3-4 months now. AINT SCARED.

On a side note, I went from 40-47 very smoothly with the script so far, will post some proggies when I get some worth posting. :) 17k an hour cuz of low fishing level isn't worth it :P

Awesome! Good luck!

From: xSorrels
BUG:

Antipattern hovers over SKILL_HUNTER of SKILL_FISHING.

And its not hoverRandomSkill();

Works just fine for me. Are your interfaces set up correctly?

I messed up and hit pause thinking it would continue the proggy after, had to do some daily stuff. :(
Script ran beautifully, the xp is low due to starting at level 40 but I am now level 64!
Still there fishing, starting a new proggy :P

Flawless script, working beautifully!

From: cbrems

I messed up and hit pause thinking it would continue the proggy after, had to do some daily stuff. :(
Script ran beautifully, the xp is low due to starting at level 40 but I am now level 64!
Still there fishing, starting a new proggy :P

Flawless script, working beautifully!

Yeah, I suppose that's a bit of an oversight with how the script measures the passage of time. It doesn't use internal timers, but rather grabs the system time from your computer's clock.

Still a really nice proggy, thanks!

Works just fine for me. Are your interfaces set up correctly?

110% sure. Its not a big deal, doesnt effect the script what so ever, just a little unusual.

From: xSorrels
110% sure. Its not a big deal, doesnt effect the script what so ever, just a little unusual.

:P are you suuuuuuuure? I tested hoverSkill() and hoverRandomSkill() yesterday and they both worked fine. Maybe it was an isolated issue, is it still happening?

From: KeepBotting
:P are you suuuuuuuure? I tested hoverSkill() and hoverRandomSkill() yesterday and they both worked fine. Maybe it was an isolated issue, is it still happening?

I dont babysit scripts much anymore after perfection.

Although I did come across this when I got home this evening.

[IMG]http://i.imgur.com/fhIw9FJ.png[/IMG]
---- Current mouse-over text: "Use Raw swordfish -> Fishing spot"
-- isMouseOverText(): False
-- TRSChooseOption._select():
---- ERROR: ChooseOption menu never appeared
-- TRSChooseOption.select() result = false

Somehow a fish was selected. Though not too sure how long before I arrived that this happened.

Again, im not too worried about it because I have been running on and off for roughly 30+ hours with no real issues.

Thanks iKeep. (;

From: xSorrels
I dont babysit scripts much anymore after perfection.

Although I did come across this when I got home this evening.

---- Current mouse-over text: "Use Raw swordfish -> Fishing spot"
-- isMouseOverText(): False
-- TRSChooseOption._select():
---- ERROR: ChooseOption menu never appeared
-- TRSChooseOption.select() result = false

Somehow a fish was selected. Though not too sure how long before I arrived that this happened.

Again, im not too worried about it because I have been running on and off for roughly 30+ hours with no real issues.

Thanks iKeep. (;

Hmm, that's weird. Were you powerfishing? Why is there one swordfish that looks different than the others?

That's on my list though, thanks. I'll add a failsafe to where the script will de-select a selected item if it finds one.

From: KeepBotting
Hmm, that's weird. Were you powerfishing? Why is there one swordfish that looks different than the others?

That's on my list though, thanks. I'll add a failsafe to where the script will de-select a selected item if it finds one.

Lol, thats a Big Swordfish.

&Yes I was powerfishing.

Im not trying to be such a pain, just trying to help tbh.

But your failsafe sounds like a great idea. (:

From: xSorrels
Lol, thats a Big Swordfish.

&Yes I was powerfishing.

Im not trying to be such a pain, just trying to help tbh.

But your failsafe sounds like a great idea. (:

Oh, nice. Congrats, apparently that's pretty rare. You can stuff it and mount it in a POH.

Nah you're not a pain at all, quite the opposite. Your suggestions and feedback help me gauge how well I'm doing and what I need to improve upon.

From: KeepBotting
Oh, nice. Congrats, apparently that's pretty rare. You can stuff it and mount it in a POH.

Nah you're not a pain at all, quite the opposite. Your suggestions and feedback help me gauge how well I'm doing and what I need to improve upon.

Ha, well thanks! Its actually the third one Ive gotten using your script.

Glad I can help, thanks again.

http://i.imgur.com/RG9oNsz.png
it sometimes moves at that location and keeps hovering over those bucket of fishes , other than that it works great

From: GTFO_Jagex
http://i.imgur.com/RG9oNsz.png
it sometimes moves at that location and keeps hovering over those bucket of fishes , other than that it works great

Stiles colors might need updated, I'll check up on that. Thanks!

From: KeepBotting
Stiles colors might need updated, I'll check up on that. Thanks!

Unfortunately 1 account banned , will watch 2nd one for any more bugs

From: GTFO_Jagex
Unfortunately 1 account banned , will watch 2nd one for any more bugs

Bugs = Bans.

Sorry for your loss.

Although you should have known not to use with this bug, like youve said.

Try making a new account and using more reliable scripts with no bugs if youre unfamiliar with editing scripts.
(Try reading The Mayors and Coh3ns guide.)

Not that this script was unreliable, just needed a few tweaks for your desires.

I achieved my goal using the power fishing method with no severe problems, so I could recommend this to just about anyone.

[ATTACH=CONFIG]24472[/ATTACH]

it's running really good went from 70 fishing to 86 in couple of days

From: bruinebanaan
[ATTACH=CONFIG]24472[/ATTACH]

it's running really good went from 70 fishing to 86 in couple of days

Awesome good to hear.

sorry if its noobish its been a while since i tried simba but i keep getting this error at this script


error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (24-11-14 at 06.30.46 PM).txt] has not been freed in the script, freeing it now.


can anyone help me thx alot already

From: nitroxx__
sorry if its noobish its been a while since i tried simba but i keep getting this error at this script


error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (24-11-14 at 06.30.46 PM).txt] has not been freed in the script, freeing it now.


can anyone help me thx alot already

You didn't set up your players correctly. Make sure you've created a player file and added a player to it with Rafiki.

Then input the correct player file and player name in the script setup.

From: KeepBotting
You didn't set up your players correctly. Make sure you've created a player file and added a player to it with Rafiki.

Then input the correct player file and player name in the script setup.

i will try this when i get home thanks alot

Just wanted to post a proggy, but my laptop has been buggy lately. Flash problems, anyways, if you'd like to have on the first post, I was able to get 3 characters to level 99 using only this bot. I'll try to post the stats when I can. Took me about the whole month of November and half the month of October. Great work man, this bot hasn't gotten me banned either. If there were any problems with the bot, it was due to my bad internet connection. I didn't have any problem with using it, and worked better than perfect. I can run the bot an easy 20 hours a day without at problems. Amazing work here

From: Nathgunner888
Just wanted to post a proggy, but my laptop has been buggy lately. Flash problems, anyways, if you'd like to have on the first post, I was able to get 3 characters to level 99 using only this bot. I'll try to post the stats when I can. Took me about the whole month of November and half the month of October. Great work man, this bot hasn't gotten me banned either. If there were any problems with the bot, it was due to my bad internet connection. I didn't have any problem with using it, and worked better than perfect. I can run the bot an easy 20 hours a day without at problems. Amazing work here

Wow, that's great. I'm very glad you were able to use this script so effectively :)

Thanks for the feedback!

im so tired of people putting "flawless bot"…..

[DEBUG]     : Appended procedure scriptTerminate to shutdown.
[DEBUG]     : Setting up SRL...
[DEBUG]     : Spawning SMART client...
SRL: Logfile = C:\Simba\Includes\SRL-6/logs/SRL log (28-11-14 at 08.43.16 PM).txt
-- setupSRL()
---- Setting up SRL...
---- attempting to spawn smart, attempt #: 1
---- initSmart():
------ Attempting to pair to a previously spawned client
------ smartPairToExistingClient():
-------- Found 1 free client(s), attempting to pair to one...
---------- smartSetAsTarget(): Succesfully set SMART[49232] as Simba's target
-------- Succesfully paired to a existing client, SMART[49232]
------ smartPairToExistingClient(): result = true
------ Succesfully initialized via pairing to a previously spawned client
---- initSmart()
------ smartSetupDrawing(): Succesfully setup SMART drawing
---- Waiting up to 5 minutes for RS to load...
------ __setInputBoxes(): Set username and password boxes
---- Client is ready.
---- Setup SRL in 0 Seconds
-- setupSRL(): True
[DEBUG]     : Successfully spawned SMART client.
-- TPlayerArray.setup()
---- Attempting to load player(s) "[]" from army ""
---- Raf_GetPlayers()
------ Army exists, reading the players...
---- Raf_GetPlayers: Result = True
---- Loaded player: 
-- TPlayerArray.setup(): Success
[DEBUG]     : Setting up players...
[DEBUG]     : Successfully defined player arrays - logging in.
-- TPlayer.login()
---- TPlayer.loginToLobby()
------ ()
------ Entering username...
------ Entering password...
-------- Saving screenshot: IP_address.png
------ Found lobby screen
---- TPlayer.loginToLobby(): True
---- TRSLobby.getCurrentTab(): Current tab is 0
---- TRSLobby.quickSelectWorld(): Found worlds [-1, -1, -1]
---- TRSLobby.getCurrentTab(): Current tab is 0
---- TRSLobby.getCurrentTab(): Current tab is 0
---- TRSLobby.getCurrentTab(): Current tab is 1
---- TRSLobby.openTab(): Result = True
---- TRSLobby.getCurrentTab(): Current tab is 1
---- TRSLobbyWorlds.selectWorld()
------ TRSLobby.getCurrentTab(): Current tab is 1
-------- TRSLobbyWorlds.getCurrentWorld(): Current world is 34
------ Already on world 34
---- TRSLobbyWorlds.selectWorld(): True
------ TRSLobby.findPlayButton(): result = True
------ TRSActionBar.__findButton(): Found the actionbar button @ {X = 566, Y = 396}
------ TRSActionBar.__find(): result = true (height = 75)
------ Dynamic interfaces have been set.
---- Logged in: needy
-- TPlayer.login(): True
[DEBUG]     : Setup complete - player is logged in.
[DEBUG]     : Setting camera.
---- minimap.mouseOffCompass(): Succesfully moved mouse off of compass
---- TRSMinimap.clickCompass(): Clicked compass
[DEBUG]     : Setting run.
[DEBUG]     : Setting gametab.
---- TRSGameTab.__initTabs(): Setup gametab properties
[DEBUG]     : Player has been initalized.
-- karamja.init()
---- FATAL ERROR: karamja.setup(): Unable to find map, searched path C:\Simba\Includes\SPS\img\karamja.png

[WARNING]   : *** Terminating script ***

[DEBUG]     : Logging out
---- TPlayer.logout()
------ Waiting for login screen...
------ Waiting for login screen...
------ Waiting for login screen...
---- TPlayer.logout(): True
[DEBUG]     : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]
File[C:\Simba\Includes\SRL-6/logs/SRL log (28-11-14 at 08.43.16 PM).txt] has not been freed in the script, freeing it now.

wont… work…

From: icyhottt
im so tired of people putting "flawless bot"…..

[DEBUG]     : Appended procedure scriptTerminate to shutdown.
[DEBUG]     : Setting up SRL...
[DEBUG]     : Spawning SMART client...
SRL: Logfile = C:\Simba\Includes\SRL-6/logs/SRL log (28-11-14 at 08.43.16 PM).txt
-- setupSRL()
---- Setting up SRL...
---- attempting to spawn smart, attempt #: 1
---- initSmart():
------ Attempting to pair to a previously spawned client
------ smartPairToExistingClient():
-------- Found 1 free client(s), attempting to pair to one...
---------- smartSetAsTarget(): Succesfully set SMART[49232] as Simba's target
-------- Succesfully paired to a existing client, SMART[49232]
------ smartPairToExistingClient(): result = true
------ Succesfully initialized via pairing to a previously spawned client
---- initSmart()
------ smartSetupDrawing(): Succesfully setup SMART drawing
---- Waiting up to 5 minutes for RS to load...
------ __setInputBoxes(): Set username and password boxes
---- Client is ready.
---- Setup SRL in 0 Seconds
-- setupSRL(): True
[DEBUG]     : Successfully spawned SMART client.
-- TPlayerArray.setup()
---- Attempting to load player(s) "[]" from army ""
---- Raf_GetPlayers()
------ Army exists, reading the players...
---- Raf_GetPlayers: Result = True
---- Loaded player: 
-- TPlayerArray.setup(): Success
[DEBUG]     : Setting up players...
[DEBUG]     : Successfully defined player arrays - logging in.
-- TPlayer.login()
---- TPlayer.loginToLobby()
------ ()
------ Entering username...
------ Entering password...
-------- Saving screenshot: IP_address.png
------ Found lobby screen
---- TPlayer.loginToLobby(): True
---- TRSLobby.getCurrentTab(): Current tab is 0
---- TRSLobby.quickSelectWorld(): Found worlds [-1, -1, -1]
---- TRSLobby.getCurrentTab(): Current tab is 0
---- TRSLobby.getCurrentTab(): Current tab is 0
---- TRSLobby.getCurrentTab(): Current tab is 1
---- TRSLobby.openTab(): Result = True
---- TRSLobby.getCurrentTab(): Current tab is 1
---- TRSLobbyWorlds.selectWorld()
------ TRSLobby.getCurrentTab(): Current tab is 1
-------- TRSLobbyWorlds.getCurrentWorld(): Current world is 34
------ Already on world 34
---- TRSLobbyWorlds.selectWorld(): True
------ TRSLobby.findPlayButton(): result = True
------ TRSActionBar.__findButton(): Found the actionbar button @ {X = 566, Y = 396}
------ TRSActionBar.__find(): result = true (height = 75)
------ Dynamic interfaces have been set.
---- Logged in: needy
-- TPlayer.login(): True
[DEBUG]     : Setup complete - player is logged in.
[DEBUG]     : Setting camera.
---- minimap.mouseOffCompass(): Succesfully moved mouse off of compass
---- TRSMinimap.clickCompass(): Clicked compass
[DEBUG]     : Setting run.
[DEBUG]     : Setting gametab.
---- TRSGameTab.__initTabs(): Setup gametab properties
[DEBUG]     : Player has been initalized.
-- karamja.init()
---- FATAL ERROR: karamja.setup(): Unable to find map, searched path C:\Simba\Includes\SPS\img\karamja.png

[WARNING]   : *** Terminating script ***

[DEBUG]     : Logging out
---- TPlayer.logout()
------ Waiting for login screen...
------ Waiting for login screen...
------ Waiting for login screen...
---- TPlayer.logout(): True
[DEBUG]     : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]
File[C:\Simba\Includes\SRL-6/logs/SRL log (28-11-14 at 08.43.16 PM).txt] has not been freed in the script, freeing it now.

wont… work…

I'm so tired of people not following instructions.

[ATTACH=CONFIG]24542[/ATTACH]

Smooth and flawless KB :)

From: Cyanempire
[ATTACH=CONFIG]24542[/ATTACH]

Smooth and flawless KB :)

Glad to hear it :) thanks for the proggy

Im getting this when I run the script:

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (09-12-14 at 08.42.04 PM).txt] has not been freed in the script, freeing it now.

EDIT: after some tweaking the new error is:

—- FATAL ERROR: karamja.setup(): Unable to find map, searched path C:\Simba\Includes\SPS\img\karamja.png

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
—- TPlayer.logout()
—— Waiting for login screen…
—— Waiting for login screen…
—- TPlayer.logout(): True
[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]
File[C:\Simba\Includes\SRL-6/logs/SRL log (09-12-14 at 08.53.21 PM).txt] has not been freed in the script, freeing it now.

I have the karamja bitmap in the folder so Idk why its giving a fatal error for that. Its logging in and choosing the server, then it logs out and ends the script. I cant see what im doing wrong to make it do this. Any help you have would be appreciated.

ANd again:

[DEBUG] : Appended procedure scriptTerminate to shutdown.
[DEBUG] : Setting up SRL…
[DEBUG] : Spawning SMART client…
SRL: Logfile = C:\Simba\Includes\SRL-6/logs/SRL log (09-12-14 at 09.06.57 PM).txt
– setupSRL()
—- Setting up SRL…
—- attempting to spawn smart, attempt #: 1
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found 1 free client(s), attempting to pair to one…
——– Failed to pair to SMART[4888]
—— smartPairToExistingClient(): result = false
—— Attempting to spawn a new client..
—— smartCreateClient():
———- smartGetParameters(): Succesfully grabbed paramters
——– getJavaPath():
———- Attempting to search for your Java path
———- Found your java path @ C:\Program Files (x86)\Java\jre1.8.0_25\bin\javaw.exe
——– getJavaPath()
——– Using parameters [http://world9a.runescape.com/, f4669014608323598821]
——– Using plugins "d3d9.dll"
——– Succesfully spawned a client, attempting to target
———- smartSetAsTarget(): Succesfully set SMART[4800] as Simba's target
—— smartCreateClient(): result = true
—— Succesfully initialized via spawning a new client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…
—— __setInputBoxes(): Set username and password boxes
—- Client is ready.
—- Setup SRL in 16 Seconds
– setupSRL(): True
[DEBUG] : Successfully spawned SMART client.
– TPlayerArray.setup()
—- Attempting to load player(s) "[jmays3@student.monroecc.edu]" from army "default"
—- Raf_GetPlayers()
—— Army exists, reading the players…
—- Raf_GetPlayers: Result = True
—- Loaded player: [email]jmays3@student.monroecc.edu[/email]
– TPlayerArray.setup(): Success
[DEBUG] : Setting up players…
[DEBUG] : Successfully defined player arrays - logging in.
– TPlayer.login()
—- TPlayer.loginToLobby()
—— [email]Jmays3@Student.Monroecc.Edu[/email] ()
—— Entering username…
—— Entering password…
——– Saving screenshot: IP_address.png
—— Found lobby screen
—- TPlayer.loginToLobby(): True
—— TRSLobbyWorlds.selectRandomWorld(): Random world is 43
—- TRSLobby.getCurrentTab(): Current tab is 0
—- TRSLobby.getCurrentTab(): Current tab is 0
—- TRSLobby.getCurrentTab(): Current tab is 1
—- TRSLobby.openTab(): Result = True
—- TRSLobby.getCurrentTab(): Current tab is 1
—- TRSLobbyWorlds.selectWorld()
—— TRSLobby.getCurrentTab(): Current tab is 1
——– TRSLobbyWorlds.getCurrentWorld(): Current world is 34
—— TRSLobby.getCurrentTab(): Current tab is 1
—— Scrolled to and found world 43
—— Selected world 43
—- TRSLobbyWorlds.selectWorld(): True
—— TRSLobby.findPlayButton(): result = True
—— TRSActionBar.__findButton(): Found the actionbar button @ {X = 566, Y = 314}
—— TRSActionBar.__find(): result = true (height = 75)
—— Dynamic interfaces have been set.
—- Logged in:
– TPlayer.login(): True
[DEBUG] : Setup complete - player is logged in.
[DEBUG] : Setting camera.
—- minimap.mouseOffCompass(): Succesfully moved mouse off of compass
—- TRSMinimap.clickCompass(): Clicked compass
[DEBUG] : Setting run.
[DEBUG] : Setting gametab.
—- TRSGameTab.__initTabs(): Setup gametab properties
[DEBUG] : Player has been initalized.
– karamja.init()
—- FATAL ERROR: karamja.setup(): Unable to find map, searched path C:\Simba\Includes\SPS\img\karamja.png

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
—- TPlayer.logout()
—— Waiting for login screen…
—— Waiting for login screen…
—- TPlayer.logout(): True
[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]
File[C:\Simba\Includes\SRL-6/logs/SRL log (09-12-14 at 09.06.57 PM).txt] has not been freed in the script, freeing it now.

And yes, i do have that karamja file in that folder.

Anyone know how undetectable this is?

From: wutangkicksit
Anyone know how undetectable this is?

By "this", do you mean the script or Simba itself?

If you mean the script, I don't think there's ever been a reported ban using it. You can search the thread if you want, though, because I'm not positive.

If you mean Simba itself, color is the safest macroing method currently available for RS.

You just joined the site - I'm assuming you're from powerbot? So compared to RSBot, it's a hell of a lot safer.

There's always the possibility of a ban though. Botting is against the rules.

Probelm arose with my character not clicking in the right location to turn lobster to note. any fix or suggestions?

From: wutangkicksit
Probelm arose with my character not clicking in the right location to turn lobster to note. any fix or suggestions?

Make sure you've set everything up correctly - if you think you have, post a screenshot of your SMART window

Not sure what this means..

[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]
File[C:\Simba\Includes\SRL-6/logs/SRL log (10-12-14 at 04.54.45 AM).txt] has not been freed in the script, freeing it now.

From: BRITISHBUDZ
Not sure what this means..

[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]
File[C:\Simba\Includes\SRL-6/logs/SRL log (10-12-14 at 04.54.45 AM).txt] has not been freed in the script, freeing it now.

Means you didn't set up a) the script or b) RuneScape correctly.

Re-read the script setup directions, and follow them. Then re-read the RS3 graphics/interface setup thread, and follow it.

Also please post the entire debug, not just the part where you think the error is (because what you posted isn't actually the error)

It worked weird this time. But still managed to get ~11 hours. Thanks for the script.
i.imgur.com/RwY1rux.png

From: rsplayer
It worked weird this time. But still managed to get ~11 hours. Thanks for the script.
i.imgur.com/RwY1rux.png

How weird is weird? Anything specific you think I could improve?

Thanks for the proggy :)

E: from your screenshot I see that your interfaces are setup weird, why is half of the gametabs in the top-left? Changing that may improve performance

From: KeepBotting
How weird is weird? Anything specific you think I could improve?

Thanks for the proggy :)

E: from your screenshot I see that your interfaces are setup weird, why is half of the gametabs in the top-left? Changing that may improve performance

Tabs are opened by script, idk why.

From: rsplayer
Tabs are opened by script, idk why.

It's supposed to open tabs, but they shouldn't appear in the top left.

Reset your Old School interface layout, that might kick them back to where they're supposed to be

Also which version are you running? Looks like you're using one with a broken DTM which has since been fixed - check the OP, make sure you've downloaded v1.1

how do u pass the 6 hour limit o.O?

From: iriep12345
how do u pass the 6 hour limit o.O?

Good question. Is it not working for you?

The script will try to log back in if it's ever logged out. If the script receives the "Game session has ended" message, it will call the SRL event EVENT_RS_UPDATE.

In turn, that calls the procedure sixHourFix(), which deals with killing the current SMART, waiting 5 minutes, then spawning a new one.

yeah but what happens is it does username and password in the username box

From: iriep12345
yeah but what happens is it does username and password in the username box

That's an issue with SRL, not the script. Nothing I can do about that.

oh ok.. so how do some people get 20 hours + on this bot if it resets?

From: iriep12345
oh ok.. so how do some people get 20 hours + on this bot if it resets?

The issue doesn't occur 100% of the time, and some people never experience it at all

this keeps on happening .. :S
[DEBUG] : Appended procedure scriptTerminate to shutdown.
[DEBUG] : Setting up SRL…
[DEBUG] : Spawning SMART client…
SRL: Logfile = C:\Simba\Includes\SRL-6/logs/SRL log (29-12-14 at 10.10.08 PM).txt
– setupSRL()
—- Setting up SRL…
—- attempting to spawn smart, attempt #: 1
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found 2 free client(s), attempting to pair to one…
——– Failed to pair to SMART[5968]
——– Failed to pair to SMART[7204]
—— smartPairToExistingClient(): result = false
—— Attempting to spawn a new client..
—— smartCreateClient():
———- smartGetParameters(): Succesfully grabbed paramters
——– getJavaPath():
———- Attempting to search for your Java path
———- Found your java path @ C:\Program Files\Java\jre8\bin\javaw.exe
——– getJavaPath()
——– Using parameters [http://world26.runescape.com/, f5214369059761152228]
——– Using plugins "d3d9.dll"
—— Failed to spawn a SMART client
—- initSmart()
—- attempting to spawn smart, attempt #: 2
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found no free clients to pair to
—— smartPairToExistingClient(): result = false
—— Attempting to spawn a new client..
—— smartCreateClient():
———- smartGetParameters(): Succesfully grabbed paramters
——– getJavaPath():
———- Attempting to search for your Java path
———- Found your java path @ C:\Program Files\Java\jre8\bin\javaw.exe
——– getJavaPath()
——– Using parameters [http://world28.runescape.com/, f5338627740623541861]
——– Using plugins "d3d9.dll"
—— Failed to spawn a SMART client
—- initSmart()
—- attempting to spawn smart, attempt #: 3
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found no free clients to pair to
—— smartPairToExistingClient(): result = false
—— Attempting to spawn a new client..
—— smartCreateClient():
———- smartGetParameters(): Succesfully grabbed paramters
——– getJavaPath():
———- Attempting to search for your Java path
———- Found your java path @ C:\Program Files\Java\jre8\bin\javaw.exe
——– getJavaPath()
——– Using parameters [http://world32.runescape.com/, f4622403360434321220]
——– Using plugins "d3d9.dll"
—— Failed to spawn a SMART client
—- initSmart()
—- attempting to spawn smart, attempt #: 4
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found no free clients to pair to
—— smartPairToExistingClient(): result = false
—— Attempting to spawn a new client..
—— smartCreateClient():
———- smartGetParameters(): Succesfully grabbed paramters
——– getJavaPath():
———- Attempting to search for your Java path
———- Found your java path @ C:\Program Files\Java\jre8\bin\javaw.exe
——– getJavaPath()
——– Using parameters [http://world54.runescape.com/, f5359420882569138372]
——– Using plugins "d3d9.dll"
—— Failed to spawn a SMART client
—- initSmart()
—- attempting to spawn smart, attempt #: 5
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found no free clients to pair to
—— smartPairToExistingClient(): result = false
—— Attempting to spawn a new client..
—— smartCreateClient():
was looping

AMAZING Script! I have been running for over 25 hours right now, Saving up for a huge proggy :p
[ATTACH=CONFIG]24721[/ATTACH]
I ran for 10 before this but i had to restart my system.
Started at 40 fishing now almost 70.

Just wanted to say your script is running great, took me awhile to get it to work (stupid slim headers >.<) but I got it going now I'm cruising will post a proggy when I can.

From: iriep12345
this keeps on happening .. :S
was looping

Not the script's fault, I'm not sure why that was happening but it wasn't anything the script did, maybe you or RS was having connection issues at that time?

From: maindog
AMAZING Script! I have been running for over 25 hours right now, Saving up for a huge proggy :p
[ATTACH=CONFIG]24721[/ATTACH]
I ran for 10 before this but i had to restart my system.
Started at 40 fishing now almost 70.

Awesomeness, thanks for the proggy

From: Xeroslayer
Just wanted to say your script is running great, took me awhile to get it to work (stupid slim headers >.<) but I got it going now I'm cruising will post a proggy when I can.

Sweet, thanks for the feedback

http://gyazo.com/d5a47e2c16cb431d13d3a68f5ce2c1b4

Top proggy :spot:

[ATTACH=CONFIG]24731[/ATTACH]

Thanks for script

From: mrisperfect
http://gyazo.com/d5a47e2c16cb431d13d3a68f5ce2c1b4

Top proggy :spot:

From: Xeroslayer
[ATTACH=CONFIG]24731[/ATTACH]

Thanks for script

Awesome, thanks guys. OP updated with proggies.

From: KeepBotting
Awesome, thanks guys. OP updated with proggies.

Thanks for providing the awesome script :)

From: mrisperfect
Thanks for providing the awesome script :)

I second this really helping me out Its really helping me out training.

After reading the Leechers guide thingy, I realized I've been an ass to you by not posting proggys… I don't have the most recent one, but I can say that I've fished about 10,000 lobsters with this script.

YOU ROCK! Thanks for the fishing/cooking xp :p

From: pizzapants
After reading the Leechers guide thingy, I realized I've been an ass to you by not posting proggys… I don't have the most recent one, but I can say that I've fished about 10,000 lobsters with this script.

YOU ROCK! Thanks for the fishing/cooking xp :p

Never too late to make a change :) I'm glad you've found the script so useful!

Under requirements you have level 70 for swordfish. :spongebob:

From: Xeroslayer
Under requirements you have level 70 for swordfish. :spongebob:

Rofl, I do that wayy too often. :p the requirement is 50, right? Updated, thanks.

Great script it runs great just sometimes runs a little to far but it figures it out and gets back on track. do you plan on implementing a break system?

Reserved for proggy.

loops – karamja.getPlayerPos(): result = {X = 590, Y = 118}, took 4294967608 ms
[DEBUG] : Our location is currently: dock
it just stands there and does this till it logs out then logs in and does it again.
I have everything set up right… it was working just the other day. I want to get a badass proggy to post but it wont run for more than a few hours for me…

From: thebob142
Great script it runs great just sometimes runs a little to far but it figures it out and gets back on track. do you plan on implementing a break system?

Reserved for proggy.

Yeah, I kept footballjds' old SPS map so it borks every once in a while. Always recovers itself though :)

From: mkmk4
loops – karamja.getPlayerPos(): result = {X = 590, Y = 118}, took 4294967608 ms
[DEBUG] : Our location is currently: dock
it just stands there and does this till it logs out then logs in and does it again.
I have everything set up right… it was working just the other day. I want to get a badass proggy to post but it wont run for more than a few hours for me…

4294967608 ms is 1193 hours. I'm about 9% sure it wasn't calculating your position for that long, the timer must have bugged.

Anyway that's probably not relevant, post a screenshot of your SMART window

From: KeepBotting
4294967608 ms is 1193 hours. I'm about 9% sure it wasn't calculating your position for that long, the timer must have bugged.

Anyway that's probably not relevant, post a screenshot of your SMART window

haha I'm 100% sure it was not! It would do that every second until it logs out. also another time it would run then on the way back it would get "lost" right beside the dock and log out. I'll edit this post with the smart window when I get home.

here you go…
[ATTACH=CONFIG]24750[/ATTACH]

EDIT: I tried restarting my computer and the script seems to be working fine now. I'll let you know how it goes. Strange… I dont really understand how that happened. I'm guessing some kind of really bad memory leak… Then again I don't think your scripts stores any dynamic memory. Well let me know what you think.

From: mkmk4
haha I'm 100% sure it was not! It would do that every second until it logs out. also another time it would run then on the way back it would get "lost" right beside the dock and log out. I'll edit this post with the smart window when I get home.

here you go…
[ATTACH=CONFIG]24750[/ATTACH]

EDIT: I tried restarting my computer and the script seems to be working fine now. I'll let you know how it goes. Strange… I dont really understand how that happened. I'm guessing some kind of really bad memory leak… Then again I don't think your scripts stores any dynamic memory. Well let me know what you think.

Was probably a freak accident. Let me know if it happens again ;)

how do i Fill out your player info?

From: nukuobut
how do i Fill out your player info?

playerName is the name of the player you put into Rafiki
playerFile is the name of the file you're saving your players to

thanks

but how do you open a window like that? sorry im new in this stuff:duh:

From: nukuobut
but how do you open a window like that? sorry im new in this stuff:duh:

SRL > Player Manager

well heres that badass proggy I prommissed ;) ran on two accounts for 15 hours straight :D [ATTACH=CONFIG]24756[/ATTACH]

From: mkmk4
well heres that badass proggy I prommissed ;) ran on two accounts for 15 hours straight :D [ATTACH=CONFIG]24756[/ATTACH]

Awesome - thanks for the double-proggy! OP updated.

I apologize in advance if this is something obvious I am missing but every time I start the script nothing happens.
It loads the client, that is about it.

– setupSRL()
—- Setting up SRL…
—- attempting to spawn smart, attempt #: 1
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found 2 free client(s), attempting to pair to one…
———- smartSetAsTarget(): Succesfully set SMART[41] as Simba's target
——– Succesfully paired to a existing client, SMART[41]
—— smartPairToExistingClient(): result = true
—— Succesfully initialized via pairing to a previously spawned client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…
—- 1 minute(s) have passed, client is not ready yet
—- 2 minute(s) have passed, client is not ready yet
—- 3 minute(s) have passed, client is not ready yet
—- 4 minute(s) have passed, client is not ready yet
—- Client is taking too long to load, terminating…
– setupSRL(): False

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (20-01-15 at 03.37.16 AM).txt] has not been freed in the script, freeing it now.

From: Pompus
I apologize in advance if this is something obvious I am missing but every time I start the script nothing happens.
It loads the client, that is about it.

– setupSRL()
—- Setting up SRL…
—- attempting to spawn smart, attempt #: 1
—- initSmart():
—— Attempting to pair to a previously spawned client
—— smartPairToExistingClient():
——– Found 2 free client(s), attempting to pair to one…
———- smartSetAsTarget(): Succesfully set SMART[41] as Simba's target
——– Succesfully paired to a existing client, SMART[41]
—— smartPairToExistingClient(): result = true
—— Succesfully initialized via pairing to a previously spawned client
—- initSmart()
—— smartSetupDrawing(): Succesfully setup SMART drawing
—- Waiting up to 5 minutes for RS to load…
—- 1 minute(s) have passed, client is not ready yet
—- 2 minute(s) have passed, client is not ready yet
—- 3 minute(s) have passed, client is not ready yet
—- 4 minute(s) have passed, client is not ready yet
—- Client is taking too long to load, terminating…
– setupSRL(): False

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (20-01-15 at 03.37.16 AM).txt] has not been freed in the script, freeing it now.

Set up RS as detailed in this thread: https://villavu.com/forum/showthread.php?t=47714

From: mkmk4
haha I'm 100% sure it was not! It would do that every second until it logs out. also another time it would run then on the way back it would get "lost" right beside the dock and log out. I'll edit this post with the smart window when I get home.

here you go…
[ATTACH=CONFIG]24750[/ATTACH]

EDIT: I tried restarting my computer and the script seems to be working fine now. I'll let you know how it goes. Strange… I dont really understand how that happened. I'm guessing some kind of really bad memory leak… Then again I don't think your scripts stores any dynamic memory. Well let me know what you think.

Really weird, I had the same exact problem last week but decided to give it another shot last night and voila it works. I haven't changed anything other than restarting my comp. Anyways here's a 9 hour prog. Thanks for the great script as always KB!

From: TotalMassacre
Really weird, I had the same exact problem last week but decided to give it another shot last night and voila it works. I haven't changed anything other than restarting my comp. Anyways here's a 9 hour prog. Thanks for the great script as always KB!

Thanks for the proggy :)

Longest one I've done :D

Finally got this scipt working after some trial and error. Something as little as not typing in your username correctly in the setup will prevent it from working. I had to go back and visit the "how to install/setup simba" thread and did everything it said, so now the scripts working great so far. I did notice just now that the script went to stiles without having a full inventory, but that's not that serious to me.

From: BadIdea
Something as little as not typing in your username correctly in the setup will prevent it from working.

Well I don't think that's a "little" mistake :D :D

awesome script and works really well, struggled to get it to work on my own stupidity by having the transparency all the way to %100 instead of %0 =D

From: TotalMassacre

Longest one I've done :D

Thanks!

From: BadIdea
Something as little as not typing in your username correctly in the setup will prevent it from working.

Well … yeah. I'd have thought that was obvious. If you type your username wrong, you're going to get an error. That's the case with every authentication system ever.

From: TotalMassacre
Well I don't think that's a "little" mistake :D :D

;)

From: xon353
awesome script and works really well, struggled to get it to work on my own stupidity by having the transparency all the way to %100 instead of %0 =D

Thanks for the feedback. That's a common mistake, no worries! I'm glad you were able to get it working.

I've been using this script for a few days, and it's going great. I'll post my progress soon. Is there a break handler for this script?

From: BadIdea
I've been using this script for a few days, and it's going great. I'll post my progress soon. Is there a break handler for this script?

Thanks for the feedback. No, there is no breaking.

Works good ;) I will probably fish a whole bunch of lobbys on my HCIM



That logout on terminate is the worst feature in the whole world :p

From: The Mayor
Works good ;) I will probably fish a whole bunch of lobbys on my HCIM



That logout on terminate is the worst feature in the whole world :p

agreed. ;)

From: The Mayor
Works good ;) I will probably fish a whole bunch of lobbys on my HCIM



That logout on terminate is the worst feature in the whole world :p

From: Theron
agreed. ;)

Is it really? I find it incredibly annoying when developing, but I usually comment it out or force-terminate the script. I thought it'd be better than letting the player idle for 5 minutes until logout.

Thanks for the proggy Mayor!

Awesome Script here is a proggy!

script works until it comes time to log in. when the client loads up i get the message "waiting up to 5 minutes for RS to load…" and so on until the 5 minutes is up and then says it will free a SRL script. but still continues no to work. can anyone help with this problem? Thanks!

From: jbatt99
script works until it comes time to log in. when the client loads up i get the message "waiting up to 5 minutes for RS to load…" and so on until the 5 minutes is up and then says it will free a SRL script. but still continues no to work. can anyone help with this problem? Thanks!

Your graphics settings are incorrect.

From: jbatt99
script works until it comes time to log in. when the client loads up i get the message "waiting up to 5 minutes for RS to load…" and so on until the 5 minutes is up and then says it will free a SRL script. but still continues no to work. can anyone help with this problem? Thanks!

I initially had that issue. Make sure you are using direct x in both SRL player manager and runescape itself.

Im not sure if someone has mentioned this before or not but sometimes when i check on the script it has the notes window open ingame and it just endlessly runs between the dock and stiles. Once i close the window it works just fine again. Thought id point it out!

From: MCPunk3108
Im not sure if someone has mentioned this before or not but sometimes when i check on the script it has the notes window open ingame and it just endlessly runs between the dock and stiles. Once i close the window it works just fine again. Thought id point it out!

The script opens random gametabs as an antipattern. If your interfaces are configured to open certain gametabs in nonstandard places (i.e. over the mainScreen or minimap) it could break the script.

So, reset your interfaces to the Old School preset and that should no longer happen

i get an error compiling when i try to launch the Error: The Box you passed to Rectangle doesn't have normal bounds: (1,777) : (576,598) at line 77
Execution failed. i know this is in the drawing script but im lost and i have no idea what to do :/ can you help me please keep botting?:c

From: brenden17
i get an error compiling when i try to launch the Error: The Box you passed to Rectangle doesn't have normal bounds: (1,777) : (576,598) at line 77
Execution failed. i know this is in the drawing script but im lost and i have no idea what to do :/ can you help me please keep botting?:c

Post a screenshof of your SMART window (logged in)

Every time I try to use the script I get an error saying "*** FATAL ERROR: Failed to handle walking!". I have no idea what to do, can you help?? thank you!
[ATTACH=CONFIG]25028[/ATTACH]

From: Suite Pee
Every time I try to use the script I get an error saying "*** FATAL ERROR: Failed to handle walking!". I have no idea what to do, can you help?? thank you!
[ATTACH=CONFIG]25028[/ATTACH]

https://villavu.com/forum/showthread.php?t=47714

5 hour prog for you! :)

[ATTACH=CONFIG]25029[/ATTACH]

Awesome script ran perfectly for 10hrs +

Just a quick proggy! Awesome Bot, still going trying to beat your best 51 hour proggy :P hopefully that ban hammer stays away from me XD

[ATTACH=CONFIG]25040[/ATTACH]

When I run this script Simba open 2+ SMART screen and do nothing what's the problem?

From: Notplayingrs
5 hour prog for you! :)

[ATTACH=CONFIG]25029[/ATTACH]

From: destinyxx
Awesome script ran perfectly for 10hrs +

From: lachieeeeeee
Just a quick proggy! Awesome Bot, still going trying to beat your best 51 hour proggy :P hopefully that ban hammer stays away from me XD

[ATTACH=CONFIG]25040[/ATTACH]

Thanks guys.

From: Wiqkszon
When I run this script Simba open 2+ SMART screen and do nothing what's the problem?

Post debug output and a screenshot of your graphics settings (RuneScape)

From: KeepBotting
Thanks guys.



Post debug output and a screenshot of your graphics settings (RuneScape)

Forgot to mention all the flower petals ive been getting… Ive made SOO much more money because of those!

Error: The Box you passed to Rectangle doesn't have normal bounds: (1,611) : (576,598) at line 77
HEEEEEEEEEEEEEEEEEEELP???

i have the same problem for any reason has this been fixed?

From: ltztakechi1
Error: The Box you passed to Rectangle doesn't have normal bounds: (1,611) : (576,598) at line 77
HEEEEEEEEEEEEEEEEEEELP???

From: ltztakechi1
i have the same problem for any reason has this been fixed?

No need to double-post. The edit button is there for a reason, plus I'm pretty active and get notifications whenever someone replies to my threads.

As for your issue: re-read the RS3 setup thread slowly and carefully. Take note of each step and make sure you've followed it correctly.

FYI, it mouses over your character if you're wearing the Investigator outfit. Don't wear it.

From: spaghettijohnson
FYI, it mouses over your character if you're wearing the Investigator outfit. Don't wear it.

Yeah I don't filter points out of the playerBox at any point :p I'll have to remember to fix that

The script works great, had it running overnight with no problems. Thanks!
[ATTACH=CONFIG]25063[/ATTACH]

I ran the bot for almost 8 hours straight with no issues. Don't have a progress report because I closed it while playing another game.

From: blur241
The script works great, had it running overnight with no problems. Thanks!
[ATTACH=CONFIG]25063[/ATTACH]

From: spaghettijohnson
I ran the bot for almost 8 hours straight with no issues. Don't have a progress report because I closed it while playing another game.

Thanks guys :)

i.imgur.com/uXns44A.png

From: spaghettijohnson
http://i.imgur.com/uXns44A.png

Thanks :)

I catch the bot trying to still fish even though it has full inventory and the "fishing spot" words are all of the screen? this happens every so often. and another thing is that when it log outs at the 6 hour mark and tries to log in it types the username twice if it doesnt get it right the first time.

[ATTACH=CONFIG]25198[/ATTACH]

From: tokoolman
I catch the bot trying to still fish even though it has full inventory and the "fishing spot" words are all of the screen? this happens every so often. and another thing is that when it log outs at the 6 hour mark and tries to log in it types the username twice if it doesnt get it right the first time.

1. Yeah, it does that. I'm exiting a loop improperly (or not at all) somewhere. It causes a search to be performed once after the inventory is full, and once after it arrives at Stiles. Not something I'm too worried about atm.

2. That was fixed in a SRL update a while ago, ensure that you're up to date

From: evilcitrus
[ATTACH=CONFIG]25198[/ATTACH]

Thanks!

Hhmm.. After running it for 4 hours, it suddenly stopped worked.
It keeps clicking on a spot, but the inventory is full, restarting simba doesn't work?
Also I was running two clients, and simba told me I'm out of memory?

From: fgamer
Hhmm.. After running it for 4 hours, it suddenly stopped worked.
It keeps clicking on a spot, but the inventory is full, restarting simba doesn't work?
Also I was running two clients, and simba told me I'm out of memory?

1. Post a screenshot of your SMART client (logged in). If it fails to detect a full inventory, you probably have your graphics/interfaces wrong.

2. How much memory do you have? Standard Windows 7/8/8.1 can eat anywhere from 500-700MB, and RS itself can occupy at least as much more again.

Hhmm.. After running it for 4 hours, it suddenly stopped worked.
It keeps clicking on a spot, but the inventory is full, restarting simba doesn't work?
it used to be ever so often now it is doing it on its first full inventory

I think I got it solved.

Ohh btw, what's the function name of the function wich is updating the EXP/H , Tuna's Caught etc?
I want to recall it every 5 seconds, can you help me with that?

From: tokoolman
Hhmm.. After running it for 4 hours, it suddenly stopped worked.
It keeps clicking on a spot, but the inventory is full, restarting simba doesn't work?
it used to be ever so often now it is doing it on its first full inventory

Looks like you have the same issue as fgamer above, so I'll direct you to my post in response to him: please provide that information.

From: fgamer
Ohh btw, what's the function name of the function wich is updating the EXP/H , Tuna's Caught etc?
I want to recall it every 5 seconds, can you help me with that?

I believe it's paintProggy() which actually does the on-screen painting, but countFish() is the routine that counts the fish, and the variables used across those functions are incremented in yet more places…

There's no way to make the proggy update any faster than it already does without rewriting a bunch of stuff.

From: KeepBotting
Looks like you have the same issue as fgamer above, so I'll direct you to my post in response to him: please provide that information.

I believe it's paintProggy() which actually does the on-screen painting, but countFish() is the routine that counts the fish, and the variables used across those functions are incremented in yet more places…

There's no way to make the proggy update any faster than it already does without rewriting a bunch of stuff.

I thought the problem was gone after re-starting Samba and fixing my graphics.
But I seems like it is doing it again.

I started the bot around midnight. 00:00
This morning I woke up at 09:30, and it did the same thing again. (Bot running was on 6 hours. (The paintproggy))
Since it is re-updating the paintproggy only if you finish a load or exchange at stiles.. I assume it was already clicking on the same spot for 3 and half hours with a full inventory. (I didn't close the bot, neither I did restart it after I found out.)
Now it is 12:16 here. and the paintproggy updated 12 minutes ago, now it is staying at the same spot again.
But it caught 100 more fishes. (Something like that, so it did 4 more loads)
I also noticed that the bot is changing this list himself.

I also wanna add that it is a nice script, before it got bugged.
I had it running for 24 hours without any problems, and caught like 4000 swordfishes, and 5000 tunas.








EDIT;

After setting the preset AGAIN to "Old school", the script is working again.
So I assume the script is changing presets himself.




EDIT 2;
I also wanna ask if it is okay for you if I edit the script. (Making the paintproggy reload faster.)
I'm new in scripting and wanna start off with editting pre-made scripts.

From: fgamer
I thought the problem was gone after re-starting Samba and fixing my graphics.
But I seems like it is doing it again.

I started the bot around midnight. 00:00
This morning I woke up at 09:30, and it did the same thing again. (Bot running was on 6 hours. (The paintproggy))
Since it is re-updating the paintproggy only if you finish a load or exchange at stiles.. I assume it was already clicking on the same spot for 3 and half hours with a full inventory. (I didn't close the bot, neither I did restart it after I found out.)
Now it is 12:16 here. and the paintproggy updated 12 minutes ago, now it is staying at the same spot again.
But it caught 100 more fishes. (Something like that, so it did 4 more loads)
I also noticed that the bot is changing this list himself.

I also wanna add that it is a nice script, before it got bugged.
I had it running for 24 hours without any problems, and caught like 4000 swordfishes, and 5000 tunas.








EDIT;

After setting the preset AGAIN to "Old school", the script is working again.
So I assume the script is changing presets himself.




EDIT 2;
I also wanna ask if it is okay for you if I edit the script. (Making the paintproggy reload faster.)
I'm new in scripting and wanna start off with editting pre-made scripts.

Try disabling the game clock of moving it away from the tab area. The script is designed to mess with the interfaces a bit (opening random tabs etc) but it doesn't switch presets and the game clock might be interfering with backpack detection.

Thanks for the positive feedback - and yes, it's perfectly fine for you to edit this script.

From: KeepBotting
Try disabling the game clock of moving it away from the tab area. The script is designed to mess with the interfaces a bit (opening random tabs etc) but it doesn't switch presets and the game clock might be interfering with backpack detection.

Thanks for the positive feedback - and yes, it's perfectly fine for you to edit this script.

Thanks for your response, It was indeed the clock. That problem is solved.
I'll run the script for 48 hours from now and post a progress report. I already gained 6 levels using this script. (74-80)

I discovered a fatal bug. Sometimes, the script clicks on one of the items in the inventory. Then when it tries to click a fishing spot it loops this:

—- Current mouse-over text: "Use Raw swordfish -> Fishing spot"
—- Current mouse-over text: "Use Raw swordfish -> Fishing spot"
—- Current mouse-over text: "Use Raw swordfish -> Fishing spot"
—- Current mouse-over text: "Use Raw swordfish -> Fishing spot"
—- Current mouse-over text: "Use Raw swordfish -> Fishing spot"

From: fgamer
Thanks for your response, It was indeed the clock. That problem is solved.
I'll run the script for 48 hours from now and post a progress report. I already gained 6 levels using this script. (74-80)

Awesome, glad to hear it.

From: spaghettijohnson
I discovered a fatal bug. Sometimes, the script clicks on one of the items in the inventory. Then when it tries to click a fishing spot it loops this:

—- Current mouse-over text: "Use Raw swordfish -> Fishing spot"
—- Current mouse-over text: "Use Raw swordfish -> Fishing spot"
—- Current mouse-over text: "Use Raw swordfish -> Fishing spot"
—- Current mouse-over text: "Use Raw swordfish -> Fishing spot"
—- Current mouse-over text: "Use Raw swordfish -> Fishing spot"

Hmm, yes I can see how that would happen, there's no failsafe for it. However I don't think the script ever left-clicks in the inventory at all? How often does this happen?

From: KeepBotting
Awesome, glad to hear it.


Hmm, yes I can see how that would happen, there's no failsafe for it. However I don't think the script ever left-clicks in the inventory at all? How often does this happen?

This occured to me when I was fucking with some functions. (Just to test)
I think he editted the script a bit, wich is causing this.

IF not editting the script, this will never occur.

I just found out this also happens when your lay-out isn't correct.
Make sure you have the correct interface/layout/graphics settings.

This can also happen if smart is disabled and you're moving the mouse yourself.

From: KeepBotting
Awesome, glad to hear it.


Hmm, yes I can see how that would happen, there's no failsafe for it. However I don't think the script ever left-clicks in the inventory at all? How often does this happen?

I don't know. I checked on the bot after one hour of progress and saw it in the loop. I didn't click anything while I was gone.

From: KeepBotting
Try disabling the game clock of moving it away from the tab area. The script is designed to mess with the interfaces a bit (opening random tabs etc) but it doesn't switch presets and the game clock might be interfering with backpack detection.

Thanks for the positive feedback - and yes, it's perfectly fine for you to edit this script.

awesome working fine now! thank you so much for your hard work and voluntary updates to the community!

From: KeepBotting
Hmm, yes I can see how that would happen, there's no failsafe for it. However I don't think the script ever left-clicks in the inventory at all? How often does this happen?

I've had this happen to me, and I'm pretty sure it was caused by me disabling smart and moving the mouse. Unfortunately it was stuck for like an hour before I noticed. Lesson learned, don't mess with a running bot :P

Everytime I run the script, I come up with an error:

[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (19-03-15 at 11.24.10 PM).txt] has not been freed in the script, freeing it now.

I'm not good with programming. What do I do?

From: michaelcmelton
Everytime I run the script, I come up with an error:

[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (19-03-15 at 11.24.10 PM).txt] has not been freed in the script, freeing it now.

I'm not good with programming. What do I do?

You can post more of the debug, above that error. The error contained in your post isn't actually the error, but rather an error in my script's shutdown routine.

thanks :)

From: tokoolman
thanks :)

Welcome :)

ty, solid script working very well

From: jok145
ty, solid script working very well

Cool, glad to hear

Script sometimes fails to find fishing spots and spams the fishing spot overlay text and infinity loops, but other then then works the charm

EDIT: Would it be possible to add an option to drop tuna and note swordfish? What would need to be added?

From: Lobster
Script sometimes fails to find fishing spots and spams the fishing spot overlay text and infinity loops, but other then then works the charm

EDIT: Would it be possible to add an option to drop tuna and note swordfish? What would need to be added?

Can you add some more detail about this issue? How often does it happen?

As far as dropping tuna and noting only swordfish, there's already framework in place for a) dropping fish and b) noting fish, so some additional logic to keep your swordies and drop your tunas wouldn't be too terribly hard to add.

From: KeepBotting
Can you add some more detail about this issue? How often does it happen?

As far as dropping tuna and noting only swordfish, there's already framework in place for a) dropping fish and b) noting fish, so some additional logic to keep your swordies and drop your tunas wouldn't be too terribly hard to add.

It's only happened once in the few days I've used it, and I'd left it running so not sure what caused it. It endless looped printing "Fishing spots" and mousing over the spots but never clicking, I think it printed it in such a way it covered the spot? If it happens again I'll take a screenshot and post it here, but I think it might have just been a freak accident.

Now I'm getting this strange error:

Error: Duplicate declaration "copy" at line 296
Compiling failed.
296: function TStringArray.copy(const sindex, eindex : Integer): TStringArray;

Any ideas?

From: Lobster
Now I'm getting this strange error:

Error: Duplicate declaration "copy" at line 296
Compiling failed.
296: function TStringArray.copy(const sindex, eindex : Integer): TStringArray;

Any ideas?

I don't think I have TStringArray.copy() in my script, does that error open up a new tab in Simba when it happens?

From: KeepBotting
I don't think I have TStringArray.copy() in my script, does that error open up a new tab in Simba when it happens?

Bad SRL-6 commit!

From: KeepBotting
I don't think I have TStringArray.copy() in my script, does that error open up a new tab in Simba when it happens?

It does, but I haven't changed anything anywhere so wondering why it's showing up all of a sudden :confused:

From: Lobster
It does, but I haven't changed anything anywhere so wondering why it's showing up all of a sudden :confused:

From: The Mayor
Bad SRL-6 commit!

There we go, looks like an update to the repository broke SRL-6 :p just wait for a fix, Lobster.

Ah ok… I guess I'll just have to legit for a bit then.

From: Lobster
Ah ok… I guess I'll just have to legit for a bit then.

Won't have to wait too long, The Mayor reverted the bad commits about 20 minutes ago, so it'll be in the autoupdater soon.

SRL > Settings > enable Override Update, then SRL > Check for Update every 10 minutes or so, when you update to SRL-6 revision 1106 it'll fix all the issues.

From: KeepBotting
Won't have to wait too long, The Mayor reverted the bad commits about 20 minutes ago, so it'll be in the autoupdater soon.

SRL > Settings > enable Override Update, then SRL > Check for Update every 10 minutes or so, when you update to SRL-6 revision 1106 it'll fix all the issues.

SRL Updater: Local Version - "1106" | Remote Version = "1106"
SRL Updater: Update File - "http://wizzup.org/static/srl/srl-6.tar.bz2"
SRL Updater: Downloading…
SRL Updater: Decompressing…
SRL Updater: Extracting…
SRL Update Successful!
Error: Duplicate declaration "copy" at line 296
Compiling failed. :confused:

Is it something only on my end? I might wait until tomorrow before I try again and see if anything changes when I update.

EDIT: Working now, weird.

I face 2 errors.
1 - Error: It's impossible! at line 557
2 - Don't know which overloaded method to call with params (Int32) at line 768.

How do I continue with this?

From: raymond511
I face 2 errors.
1 - Error: It's impossible! at line 557
2 - Don't know which overloaded method to call with params (Int32) at line 768.

How do I continue with this?

"It's impossible" is an actual error? LOL

*shrug* an SRL update or something might have broken the script. I'll download it really quick and check. Hang tight.

E:

Compiled successfully in 14364 ms.

Works fine :confused: maybe you made changes to the script? If so, redownload a clean version and try it.

E2: Or maybe you posted on the wrong thread? because both lines 557 and 786 are in the middle of a huge BitmapFromString() declaration, and thus cannot throw those errors.

Manually closed, but consistently doing well, amazing script! :)

From: Lobster

Manually closed, but consistently doing well, amazing script! :)

Thanks for the proggy!

Hey. I was running this script few times for few or even more hours and everything was ok. Great scores. And then, out of nothing I started getting this error:

Error: The Box you passed to Rectangle doesn't have normal bounds: (1,613) : (576,598) at line 80

It's suspicious, because I didn't change any settings and now script is starting, setting camera and then open and close backpack few times and stopping. Any clues why?

When I run the script, I notice I don't have the progress image. I then get the following error:

Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (05-04-15 at 01.50.33 PM).txt] has not been freed in the script, freeing it now.

I'm trying to avoid asking questions, and just figure it out myself, but this error has me stumped. If it's horribly easy to fix, and I'm just being a dumb….Sorry about that -_-

From: choubliss
When I run the script, I notice I don't have the progress image. I then get the following error:

Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (05-04-15 at 01.50.33 PM).txt] has not been freed in the script, freeing it now.

I'm trying to avoid asking questions, and just figure it out myself, but this error has me stumped. If it's horribly easy to fix, and I'm just being a dumb….Sorry about that -_-

Unsure of a reason why a BitmapFromString() call would fail … it's not the best practise to load a 3000+ line bitmap into memory but it works.

Sure you haven't edited the script in any way sans the setup? Redownload a fresh copy and see if that helps.

I keep getting this repeating, happening on other fishing scripts too. Do you know what the problem could be?

[DEBUG] : Our location is currently: dock
– karamja.getPlayerPos(): result = {X = 582, Y = 114}, took 4294967873 ms
[DEBUG] : Our location is currently: dock
– karamja.getPlayerPos(): result = {X = 582, Y = 114}, took 4294967857 ms
[DEBUG] : Our location is currently: dock
– karamja.getPlayerPos(): result = {X = 582, Y = 114}, took 4294967842 ms
[DEBUG] : Our location is currently: dock
– karamja.getPlayerPos(): result = {X = 586, Y = 118}, took 4294967842 ms
[DEBUG] : Our location is currently: dock

This was the error I was having last week, seems the script accidentally clicks swordfish then keeps writing on the screen.

I think it's happening because today there are so many people in the spot that it has trouble clicking on the harpoon option. Perhaps an option for the write on screen to be erased if it can't find any options?

From: Parfilo
I keep getting this repeating, happening on other fishing scripts too. Do you know what the problem could be?

Your interfaces or graphics settings are probably wrong. Post a screenie of your SMART client, both logged in and displaying your graphics settings.

From: Lobster

This was the error I was having last week, seems the script accidentally clicks swordfish then keeps writing on the screen.

I think it's happening because today there are so many people in the spot that it has trouble clicking on the harpoon option. Perhaps an option for the write on screen to be erased if it can't find any options?

The writing on the screen is invisible to the script, there's a second canvas placed over the game window on which to draw.

The problem actually lies in which mouse-over text I'm checking for. Somewhere along the line, if an item is ever clicked (and the default option becomes "Use" or whatever) my mouse-over checks fail, the script says "Oops, that's not a fishing spot!" and loops ad infinitum.

I do agree I need a failsafe for it but I'm sort of confused as to why people have this happen - to my knowledge, the script will never left-click on the inventory.

Every time it's happened it's been when there's high traffic, maybe just a random left click somewhere before checking for fishing spots? Every time it's happened I've been afk so unfortunately can't help more =/.

After running for a while the script seems to run to stiles before the inventory is full, causing it to stop counting the total number of lobsters.

Otherwise no complaints!

From: kryogenic
After running for a while the script seems to run to stiles before the inventory is full, causing it to stop counting the total number of lobsters.

Otherwise no complaints!

Shouldn't ever do that, how long is "a while?"

Check your transparency (should be minimum, completely opaque) and brightness (should be maximum)

Happened to me after 700 lobsters. My brightness was medium, I'll post again if the issue persists. Thanks

From: kryogenic
Happened to me after 700 lobsters. My brightness was medium, I'll post again if the issue persists. Thanks

That was most likely the cause of the problem, inventory routines returning wrong values are usually manifested by having a brightness setting other than maximum.

You're quite welcome, & don't forget to post a proggy!

Hm… it's still happening. Here's a screenshot of my settings: [ATTACH=CONFIG]25583[/ATTACH]

From: KeepBotting
HAHA, I knew someone would!

Yeah, unfortunately I don't think there's a way around that.

I think you already know this, but when converting the bitmap with simba, deselect the pad output.

Sorry for my ignorance, but could you not just load the bitmap from a URL?

From: kryogenic
Hm… it's still happening. Here's a screenshot of my settings: [ATTACH=CONFIG]25583[/ATTACH]

Might you also be able to post a screenshot of your SMART window in-game, so I can see your interface setup? Therein might lie the problem.

From: masterBB
I think you already know this, but when converting the bitmap with simba, deselect the pad output.

I didn't at the time :p thanks though!

From: kryogenic
Sorry for my ignorance, but could you not just load the bitmap from a URL?

Absolutely. In fact, I do this with iOak, I just haven't updated the rest of my scripts to the new framework yet.

It's going to stiles with ~5 open inventory slots pretty much every time. I also caught it with a full inventory still trying to click fishing spots, but that seems pretty rare.

Going for longest proggy :D

Currently can't fish swordfish because of the issue. I did some debugging. With a full inventory the script shows the following:

[DEBUG]     : backpack full? False
[DEBUG]     : Counted 15 tuna.
[DEBUG]     : Counted 0 swordfish.
[DEBUG]     : Counted 0 lobsters.

Here is a screenshot from the DTM editor with that same inventory: [ATTACH=CONFIG]25611[/ATTACH]

Went through the setup tutorial again. Resetting my layout to oldschool seems to have fixed everything. Not sure what the issue was.

[ATTACH=CONFIG]25617[/ATTACH]

I would say it works pretty well lol

From: kryogenic
Going for longest proggy :D

From: kryogenic
Currently can't fish swordfish because of the issue. I did some debugging. With a full inventory the script shows the following:

[DEBUG]     : backpack full? False
[DEBUG]     : Counted 15 tuna.
[DEBUG]     : Counted 0 swordfish.
[DEBUG]     : Counted 0 lobsters.

Here is a screenshot from the DTM editor with that same inventory: [ATTACH=CONFIG]25611[/ATTACH]

From: kryogenic
Went through the setup tutorial again. Resetting my layout to oldschool seems to have fixed everything. Not sure what the issue was.

Try not to triple-post :p use the edit button please! All the same I'm glad you solved your issue & thanks for the proggy!

From: daoudwis
[ATTACH=CONFIG]25617[/ATTACH]

I would say it works pretty well lol

I would say the same :)

Another: [ATTACH=CONFIG]25634[/ATTACH]
Next one will be insane :D

When i run the Script it says, The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (22-04-15 at 10.08.52 PM).txt] has not been freed in the script, freeing it now.

It is line 3846 and the line says freeBitmap (proggyBmp);

From: ghoulstorm2
When i run the Script it says, The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (22-04-15 at 10.08.52 PM).txt] has not been freed in the script, freeing it now.

It is line 3846 and the line says freeBitmap (proggyBmp);

Post the debug above that (post all of it if you're not sure what I mean). Use CODE tags please.

I'm getting the previous draw loop every so often now, did they update something? Is anyone else getting this?

Need some money for feathers.

From: BMWxi
Need some money for feathers.

:D thanks for the progress report.

Lovely script, going to let it run till I'm lvl 99 fishing (using my new (bot testing) account).
It caught me almost 6k lobsters in 2 days (With breaks! fishing lvl 40 to 67).


Cheers mate! (y)

From: Yush Dragon
Lovely script, going to let it run till I'm lvl 99 fishing (using my new (bot testing) account).
It caught me almost 6k lobsters in 2 days (With breaks! fishing lvl 40 to 67).


Cheers mate! (y)

Sounds good, best of luck on 99!

There, my latest prog. This should prove that the script is more than solid:

Lovely script you've got here KeepBotting. Here is one of the progress reports I managed to capture / save.

[ATTACH=CONFIG]26069[/ATTACH]

[ATTACH=CONFIG]26161[/ATTACH]

One of my latest progs. Great Script, thanks!

[ATTACH=CONFIG]26162[/ATTACH]

Double Post, sorry. Can't figure out how to delete haha.

9 Hour, 39 minutes and 57 second progress screen shot

[ATTACH=CONFIG]26165[/ATTACH]

From: Yush Dragon
There, my latest prog. This should prove that the script is more than solid:

From: Garden of Sinners
Lovely script you've got here KeepBotting. Here is one of the progress reports I managed to capture / save.

[ATTACH=CONFIG]26069[/ATTACH]

From: RS3Script
[ATTACH=CONFIG]26161[/ATTACH]

One of my latest progs. Great Script, thanks!

From: RS3Script
[ATTACH=CONFIG]26162[/ATTACH]

Double Post, sorry. Can't figure out how to delete haha.

From: Garden of Sinners
9 Hour, 39 minutes and 57 second progress screen shot

[ATTACH=CONFIG]26165[/ATTACH]

Thanks, everybody! Added all of these to OP.


LOL

Looks like I'm going to have to start purging the oldest proggies! Out with the old, in with the new!

Looks like some amazing success stories so far!

Script's working excellent so far! I'm going to leave it on over night and come back to see my progress in the AM. Will update with a screenshot.

EDIT: Forgot to take a screenshot, but I did leave it on for a total of 12 hrs with no fails.

Darn you got alot of da proggys, nice

People, be careful how you use it.

It'd be best if you'd use it during the day, and leave it out at the night. And let it use some breaks.
My account (script account) got banned due 24/7 scripting. It worked for a few days till it got 80+ fishing and then I got banned.

Greets!

From: Yush Dragon
People, be careful how you use it.

It'd be best if you'd use it during the day, and leave it out at the night. And let it use some breaks.
My account (script account) got banned due 24/7 scripting. It worked for a few days till it got 80+ fishing and then I got banned.

Greets!

Exactly the same thing just happened to me. Left going too long I think, about 15 hours. Just got perma banned. Was 85+ fishing, didn't have a problem till now.

I think it's best to leave this script running for a maximum of 11-12 hours.

I would like to know if anyone else has been banned recently. Perhaps they've upgraded their anti-cheat software and this script is no longer viable?

From: m00ntan
Looks like some amazing success stories so far!

Script's working excellent so far! I'm going to leave it on over night and come back to see my progress in the AM. Will update with a screenshot.

EDIT: Forgot to take a screenshot, but I did leave it on for a total of 12 hrs with no fails.

Nice to hear :p

From: akela
Darn you got alot of da proggys, nice

Indeed, too many for vBulletin to hold :D

From: Yush Dragon
People, be careful how you use it.

It'd be best if you'd use it during the day, and leave it out at the night. And let it use some breaks.
My account (script account) got banned due 24/7 scripting. It worked for a few days till it got 80+ fishing and then I got banned.

Greets!

24/7 is a bad idea – sucks you got banned but I'm not surprised.

From: RS3Script
Exactly the same thing just happened to me. Left going too long I think, about 15 hours. Just got perma banned. Was 85+ fishing, didn't have a problem till now.

I think it's best to leave this script running for a maximum of 11-12 hours.

From: RS3Script
I would like to know if anyone else has been banned recently. Perhaps they've upgraded their anti-cheat software and this script is no longer viable?

Doubt it. Tone down your runtimes and you should be fine.