SRL Archive - General Botting Help

I'm having problems getting SRL6 to find the login boxes. I wanted to see if anyone else has seen similar or had any thoughts.

My suspicion is that it's being caused by my graphics card/driver. The machine was made for XP and is running windows 7. The graphics card is radeon X300/X500/X1050 series and the available drivers are made for vista not windows 7. I'm thinking about getting a cheap card to see if things run properly.

I'm reasonably sure my simba/smart/srl/opengl software is good. I carefully matched the client graphic settings to the guide. I also had this problem with beta releases. It did work a few times (I think when I was messing with opengl.dll files, windows version vs. brandon's). I'm now running only the released software from last week.

RS loads ok in the smart window, then __setInputBoxes returns with lousy values. __enterLoginInfo adds 8 to the X value causing an out of bounds value to get passed to findColors.

------ __setInputBoxes(): Set username and password boxes
---- __setInputBoxes():  _boxUsername(0,191,959,218)
---- __setInputBoxes():  _boxPassword(0,263,959,290)
---- Client is ready.
---- Setup SRL in 61995ms.
-- setupSRL(): True
-- TPlayer.login()
---- TPlayer.loginToLobby()
------ [email]xyz@example.com[/email] ()
------ Entering username...
Exception in Script: Runtime error: "You passed a wrong xe to a finder function: 967. The client has a width of 960, thus the xe is out of bounds." at line 145, column 23 in file "C:\Simba1.0\Includes\srl-6\lib\utilities\wrappers.simba"
File[C:\Simba1.0\Includes\SRL-6/logs/SRL log (27-09-13 at 02.35.14 PM).txt] has not been freed in the script, freeing it now.

The TPA returned by findColors(tpaActive, 6774863, 0, 0, w-1, h-1) is all out of whack:

[{X = 739, Y = 191}, {X = 740, Y = 191}, ... through {X = 959, Y = 191}, 
{X = 0, Y = 192}, {X = 1, Y = 192}, ... through {X = 23, Y = 192}, 
{X = 745, Y = 196}, 
{X = 37, Y = 197}, {X = 747, Y = 197}, 
{X = 39, Y = 198}, {X = 749, Y = 198}, 
{X = 41, Y = 199}, {X = 751, Y = 199}, 
{X = 43, Y = 200}, {X = 753, Y = 200}, 
{X = 45, Y = 201}, {X = 755, Y = 201}, 
{X = 47, Y = 202}, {X = 757, Y = 202}, 
{X = 49, Y = 203}, {X = 759, Y = 203}, 
{X = 51, Y = 204}, {X = 761, Y = 204}, 
{X = 53, Y = 205}, {X = 763, Y = 205}, 
{X = 55, Y = 206}, {X = 765, Y = 206}, 
{X = 57, Y = 207}, {X = 767, Y = 207}, 
{X = 59, Y = 208}, {X = 769, Y = 208}, 
{X = 61, Y = 209}, {X = 771, Y = 209}, 
{X = 63, Y = 210}, {X = 773, Y = 210}, 
{X = 65, Y = 211}, {X = 775, Y = 211}, 
{X = 67, Y = 212}, {X = 777, Y = 212}, 
{X = 69, Y = 213},
{X = 791, Y = 217}, {X = 792, Y = 217}, ... through {X = 959, Y = 217},
{X = 0, Y = 218}, {X = 1, Y = 218}, ... through {X = 75, Y = 218}]

Are you sure rs is in resizeable (even in the login stage)?

From: Olly
Are you sure rs is in resizeable (even in the login stage)?

I think so. I started a script to call setupsrl() and wait().

"disable smart" while at the login screen, used the settings icon and it showed resiable.

I noticed a registration unsuccessful and a java exception in the smart window. I don't know if it is normal or not.

[ATTACH=CONFIG]22261[/ATTACH]

From: b0bzilla
I think so. I started a script to call setupsrl() and wait().

"disable smart" while at the login screen, used the settings icon and it showed resiable.

I noticed a registration unsuccessful and a java exception in the smart window. I don't know if it is normal or not.

[ATTACH=CONFIG]22261[/ATTACH]

Everyone gets that error, anyway is it only the lobby screen? does srl6 work when you start logged fine?

I tried a test bypassing the login and called tabBackback.open(). This also crashed with a similar out of bounds call.

-- setupSRL(): True
-- WARNING: TRSGameTabs._isTabValid(): Tab 25 is invalid
Exception in Script: Runtime error: "You passed a wrong ys to a finder function: -10. That is below 0, thus out of bounds." at line 301, column 31 in file "C:\Simba\Includes\srl-6\lib\interfaces\gametabs\gametab.simba"
File[C:\Simba\Includes\SRL-6/logs/SRL log (01-10-13 at 03.18.29 PM).txt] has not been freed in the script, freeing it now.

I duplicated the results on different hardware. Fresh windows7 32bit, patched, current drivers.

Installed jre 7 upd 40, simba 1.0.2, followed the install process.

I didn't put in the debugs to dump the TPA and validate they were exactly the same but the exception in the simba window was the same.

Login test:

program new;
{$DEFINE SMART}
{$i srl-6/srl.simba}

begin
  ClearDebug();
  SetupSRL();
  setlength(players, 1);
  with Players[0] do
  begin
    LoginName := 'xxx@example.com';
    Password  := 'password';
    isActive  := True;
  end;
  wait(15000);
  players[0].login();
  wait(20000);
  tabBackpack.open();
  writeln(tabBackpack.count() );
  players[0].logout();
end.

Maunal login test:

program new;
{$DEFINE SMART}
{$i srl-6/srl.simba}

begin
  ClearDebug();
  SetupSRL();
  wait(40000);
  tabBackpack.open();
  writeln(tabBackpack.count() );
end.

Can you give me a screenshot of your Smart v8.3 please? The whole Smart even the titlebar and buttons.

It's caused by the length of the gametabs not being set yet, i can fix it tomorrow (im not at home currently).

QUOTE=Brandon;1267724]Can you give me a screenshot of your Smart v8.3 please? The whole Smart even the titlebar and buttons.

[ATTACH=CONFIG]22267[/ATTACH][

[ATTACH=CONFIG]22268[/ATTACH]

From: Olly
It's caused by the length of the gametabs not being set yet, i can fix it tomorrow (im not at home currently).

I don't think the root cause is in the srl6 codebase. I'm still new to this architecture but it looks to me to be a bad interaction between simba and smart.

When we ask simba to get us the tpa defining the login box, it reads the screen and hands back a (bad) list of coordinates that is the correct length (there is a check in the code).

The orange lines somewhat represent the top line of the rectangle, but all of them should have the same Y value. Plus the X values should be in the middle of the screen, not off to the right hand side.

Then we should have a run of pairs for the left and right hand part of the rectangle (green). Those should all have the same X values with the Y value incrementing. And it's close to that but the X is drifting.


[{X = 739, Y = 191}, {X = 740, Y = 191}, … through {X = 959, Y = 191},
{X = 0, Y = 192}, {X = 1, Y = 192}, … through {X = 23, Y = 192},

{X = 745, Y = 196},
{X = 37, Y = 197}, {X = 747, Y = 197},
{X = 39, Y = 198}, {X = 749, Y = 198},
{X = 41, Y = 199}, {X = 751, Y = 199},
{X = 43, Y = 200}, {X = 753, Y = 200},
{X = 45, Y = 201}, {X = 755, Y = 201},
{X = 47, Y = 202}, {X = 757, Y = 202},
{X = 49, Y = 203}, {X = 759, Y = 203},
{X = 51, Y = 204}, {X = 761, Y = 204},
{X = 53, Y = 205}, {X = 763, Y = 205},
{X = 55, Y = 206}, {X = 765, Y = 206},
{X = 57, Y = 207}, {X = 767, Y = 207},
{X = 59, Y = 208}, {X = 769, Y = 208},
{X = 61, Y = 209}, {X = 771, Y = 209},
{X = 63, Y = 210}, {X = 773, Y = 210},
{X = 65, Y = 211}, {X = 775, Y = 211},
{X = 67, Y = 212}, {X = 777, Y = 212},
{X = 69, Y = 213},

{X = 791, Y = 217}, {X = 792, Y = 217}, … through {X = 959, Y = 217},
{X = 0, Y = 218}, {X = 1, Y = 218}, … through {X = 75, Y = 218}]

oh, use this plugin https://github.com/Brandon-T/GLX-Colour/releases and see if it fixes it.

Perfect… that opengl32.dll worked. Now it logs in and was able to perform a backpack count.

It failed the logout but that's probably a minor quirk. I expect I can work out include/lape issues on my own.

Thanks so much for the time and assistance. Finally able to start some scripting!

Hmm, it seems like the wrong plugin or something was packaged with simba :s, Wizzup will be adding that plugin with the release of Simba 1.0.3.

Thanks for being patient though, if you find any more bugs it is recomended you report them @ http://villavu.com/forum/project.php?projectid=10. :)