King
2013-05-03 22:24:22
How do I deal with the immense color changes in DDTM's when walking in OSRS? I have my points auto -colored, but it changes too much even at 25 ?/:
SRL Archive - OSR Help
Dealing With color changes in DDTM's
wthomas
2013-05-03 22:41:53
Depending on the environment you can create DTM's with tolerances as high as 50-70
In a air runner I wrote, some of the DTM's for walking through fally are one point in the water another on the path and one in a building etc but its very area dependent, maybe post a picture of the map you're trying to walk?
In a air runner I wrote, some of the DTM's for walking through fally are one point in the water another on the path and one in a building etc but its very area dependent, maybe post a picture of the map you're trying to walk?
King
2013-05-03 22:49:28
From: wthomas
Depending on the environment you can create DTM's with tolerances as high as 50-70
In a air runner I wrote, some of the DTM's for walking through fally are one point in the water another on the path and one in a building etc but its very area dependent, maybe post a picture of the map you're trying to walk?
I'm trying to walk from the air balloon on entrana to the alter
westkevin12
2013-05-04 02:44:14
i'm trying to make DDTMs too and i finally got my tolerances so it will find the dtms and click but alot of times it will click somewhere i don't want it to go at all. this is what i have so far. wanting it to click inside the yanil bank then north of the bank at the gate just to test and start my path that will eventually go to the mining pit but taking it one click at a time.
program ddtmworkinprogress;
{$DEFINE SMART8}
{$i srl-osr/srl.simba}
{$I SRL-OSR/SRL/misc/SmartGraphics.Simba}
var
x,y : integer;
function bankMP: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 7171449, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function bankSP1: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 7171449, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function bankSP2: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15066602, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function bankSP3: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15066602, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function bankSP4: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15066602, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function bankSP5: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15066602, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateMP: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 4144966, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateSP1: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 4144966, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateSP2: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15392, MMX1, MMY1, MMX2, MMY2, 12) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateSP3: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15392, MMX1, MMY1, MMX2, MMY2, 12) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateSP4: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15392, MMX1, MMY1, MMX2, MMY2, 12) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateSP5: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 4144966, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceMP: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 806443, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceSP1: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 806443, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceSP2: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 212009, MMX1, MMY1, MMX2, MMY2, 18) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceSP3: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15724018, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceSP4: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 212009, MMX1, MMY1, MMX2, MMY2, 18) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceSP5: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 212009, MMX1, MMY1, MMX2, MMY2, 18) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function DDTMWalk(WalkNumber: Integer): Integer;
var
dtmMainPoint: TDTMPointDef;
dtmSubPoints: array[0..4] of TDTMPointDef;
TempTDTM: TDTM;
begin
case WalkNumber of
1: begin
dtmMainPoint.x := 1067;
dtmMainPoint.y := 241;
dtmMainPoint.AreaSize := 4;
dtmMainPoint.AreaShape := 0;
dtmMainPoint.Color := bankMP;
dtmMainPoint.Tolerance := 30;
dtmSubPoints[0].x := 1067;
dtmSubPoints[0].y := 241;
dtmSubPoints[0].AreaSize := 4;
dtmSubPoints[0].AreaShape := 0;
dtmSubPoints[0].Color := bankSP1;
dtmSubPoints[0].Tolerance := 30;
dtmSubPoints[1].x := 1053;
dtmSubPoints[1].y := 238;
dtmSubPoints[1].AreaSize := 4;
dtmSubPoints[1].AreaShape := 0;
dtmSubPoints[1].Color := banksp2;
dtmSubPoints[1].Tolerance := 0;
dtmSubPoints[2].x := 1093;
dtmSubPoints[2].y := 236;
dtmSubPoints[2].AreaSize := 4;
dtmSubPoints[2].AreaShape := 0;
dtmSubPoints[2].Color := banksp3;
dtmSubPoints[2].Tolerance := 0;
dtmSubPoints[3].x := 1065;
dtmSubPoints[3].y := 223;
dtmSubPoints[3].AreaSize := 4;
dtmSubPoints[3].AreaShape := 0;
dtmSubPoints[3].Color := banksp4;
dtmSubPoints[3].Tolerance := 0;
dtmSubPoints[4].x := 1060;
dtmSubPoints[4].y := 257;
dtmSubPoints[4].AreaSize := 4;
dtmSubPoints[4].AreaShape := 0;
dtmSubPoints[4].Color := banksp5;
dtmSubPoints[4].Tolerance := 0;
TempTDTM.MainPoint := dtmMainPoint;
TempTDTM.SubPoints := dtmSubPoints;
Result := AddDTM(TempTDTM);
end;
2: begin
dtmMainPoint.x := 1045;
dtmMainPoint.y := 242;
dtmMainPoint.AreaSize := 5;
dtmMainPoint.AreaShape := 0;
dtmMainPoint.Color := gateMP;
dtmMainPoint.Tolerance := 10;
dtmSubPoints[0].x := 1045;
dtmSubPoints[0].y := 242;
dtmSubPoints[0].AreaSize := 5;
dtmSubPoints[0].AreaShape := 0;
dtmSubPoints[0].Color := gateSP1;
dtmSubPoints[0].Tolerance := 10;
dtmSubPoints[1].x := 1049;
dtmSubPoints[1].y := 215;
dtmSubPoints[1].AreaSize := 4;
dtmSubPoints[1].AreaShape := 0;
dtmSubPoints[1].Color := gateSP2;
dtmSubPoints[1].Tolerance := 10;
dtmSubPoints[2].x := 1035;
dtmSubPoints[2].y := 213;
dtmSubPoints[2].AreaSize := 4;
dtmSubPoints[2].AreaShape := 0;
dtmSubPoints[2].Color := gateSP3;
dtmSubPoints[2].Tolerance := 10;
dtmSubPoints[3].x := 1029;
dtmSubPoints[3].y := 246;
dtmSubPoints[3].AreaSize := 4;
dtmSubPoints[3].AreaShape := 0;
dtmSubPoints[3].Color := gateSP4;
dtmSubPoints[3].Tolerance := 10;
dtmSubPoints[4].x := 1066;
dtmSubPoints[4].y := 274;
dtmSubPoints[4].AreaSize := 4;
dtmSubPoints[4].AreaShape := 0;
dtmSubPoints[4].Color := gateSP5;
dtmSubPoints[4].Tolerance := 10;
TempTDTM.MainPoint := dtmMainPoint;
TempTDTM.SubPoints := dtmSubPoints;
Result := AddDTM(TempTDTM);
end;
3: begin
dtmMainPoint.x := 1047;
dtmMainPoint.y := 222;
dtmMainPoint.AreaSize := 4;
dtmMainPoint.AreaShape := 0;
dtmMainPoint.Color := fenceMP;
dtmMainPoint.Tolerance := 20;
dtmSubPoints[0].x := 1047;
dtmSubPoints[0].y := 222;
dtmSubPoints[0].AreaSize := 4;
dtmSubPoints[0].AreaShape := 0;
dtmSubPoints[0].Color := fenceSP1;
dtmSubPoints[0].Tolerance := 20;
dtmSubPoints[1].x := 1048;
dtmSubPoints[1].y := 211;
dtmSubPoints[1].AreaSize := 4;
dtmSubPoints[1].AreaShape := 0;
dtmSubPoints[1].Color := fenceSP2;
dtmSubPoints[1].Tolerance := 10;
dtmSubPoints[2].x := 1054;
dtmSubPoints[2].y := 218;
dtmSubPoints[2].AreaSize := 4;
dtmSubPoints[2].AreaShape := 0;
dtmSubPoints[2].Color := fenceSP3;
dtmSubPoints[2].Tolerance := 20;
dtmSubPoints[3].x := 1036;
dtmSubPoints[3].y := 231;
dtmSubPoints[3].AreaSize := 4;
dtmSubPoints[3].AreaShape := 0;
dtmSubPoints[3].Color := fenceSP4;
dtmSubPoints[3].Tolerance := 10;
dtmSubPoints[4].x := 1028;
dtmSubPoints[4].y := 239;
dtmSubPoints[4].AreaSize := 4;
dtmSubPoints[4].AreaShape := 0;
dtmSubPoints[4].Color := fenceSP5;
dtmSubPoints[4].Tolerance := 10;
TempTDTM.MainPoint := dtmMainPoint;
TempTDTM.SubPoints := dtmSubPoints;
Result := AddDTM(TempTDTM);
end;
end;
end;
function walkinbank: boolean;
var
WalkDTM: integer;
aFound: Extended;
begin
WalkDTM := DDTMWalk(1);
if FindDTMRotated(WalkDTM, X, Y, MMx1,MMy1,MMx2,MMy2, - 35, 35, 1, aFound) then
begin
writeln('found dtm');
MMouse(x,y,0,0);
ClickMouse2(MOUSE_LEFT);
FFlag(0);
Result := True;
end else
begin
writeln(' could not find dtm')
end;
end;
function walktogate: boolean;
var
WalkDTM: integer;
aFound: Extended;
begin
WalkDTM := DDTMWalk(2);
if FindDTMRotated(WalkDTM, X, Y, MMx1,MMy1,MMx2,MMy2, - 35, 35, 1, aFound) then
begin
writeln('found dtm');
MMouse(x,y,0,0);
ClickMouse2(MOUSE_LEFT);
FFlag(0);
Result := True;
end else
begin
writeln(' could not find dtm')
end;
end;
procedure walktopit;
begin
walkinbank;
walktogate;
end;
begin
setupSRL;
makecompass('E');
walktopit;
end. King
2013-05-04 08:30:03
From: westkevin12
i'm trying to make DDTMs too and i finally got my tolerances so it will find the dtms and click but alot of times it will click somewhere i don't want it to go at all. this is what i have so far. wanting it to click inside the yanil bank then north of the bank at the gate just to test and start my path that will eventually go to the mining pit but taking it one click at a time.program ddtmworkinprogress;
{$DEFINE SMART8}
{$i srl-osr/srl.simba}
{$I SRL-OSR/SRL/misc/SmartGraphics.Simba}
var
x,y : integer;
function bankMP: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 7171449, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function bankSP1: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 7171449, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function bankSP2: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15066602, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function bankSP3: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15066602, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function bankSP4: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15066602, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function bankSP5: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15066602, MMX1, MMY1, MMX2, MMY2, 20) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateMP: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 4144966, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateSP1: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 4144966, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateSP2: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15392, MMX1, MMY1, MMX2, MMY2, 12) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateSP3: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15392, MMX1, MMY1, MMX2, MMY2, 12) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateSP4: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15392, MMX1, MMY1, MMX2, MMY2, 12) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function gateSP5: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 4144966, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceMP: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 806443, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceSP1: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 806443, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceSP2: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 212009, MMX1, MMY1, MMX2, MMY2, 18) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceSP3: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 15724018, MMX1, MMY1, MMX2, MMY2, 5) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceSP4: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 212009, MMX1, MMY1, MMX2, MMY2, 18) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function fenceSP5: Integer;
var
TPA : TPointArray;
begin
SMART_DrawDots(TPA);
if FindColorsTolerance(TPA, 212009, MMX1, MMY1, MMX2, MMY2, 18) then
Result:= GetColor(TPA[0].X, TPA[0].Y);
end;
function DDTMWalk(WalkNumber: Integer): Integer;
var
dtmMainPoint: TDTMPointDef;
dtmSubPoints: array[0..4] of TDTMPointDef;
TempTDTM: TDTM;
begin
case WalkNumber of
1: begin
dtmMainPoint.x := 1067;
dtmMainPoint.y := 241;
dtmMainPoint.AreaSize := 4;
dtmMainPoint.AreaShape := 0;
dtmMainPoint.Color := bankMP;
dtmMainPoint.Tolerance := 30;
dtmSubPoints[0].x := 1067;
dtmSubPoints[0].y := 241;
dtmSubPoints[0].AreaSize := 4;
dtmSubPoints[0].AreaShape := 0;
dtmSubPoints[0].Color := bankSP1;
dtmSubPoints[0].Tolerance := 30;
dtmSubPoints[1].x := 1053;
dtmSubPoints[1].y := 238;
dtmSubPoints[1].AreaSize := 4;
dtmSubPoints[1].AreaShape := 0;
dtmSubPoints[1].Color := banksp2;
dtmSubPoints[1].Tolerance := 0;
dtmSubPoints[2].x := 1093;
dtmSubPoints[2].y := 236;
dtmSubPoints[2].AreaSize := 4;
dtmSubPoints[2].AreaShape := 0;
dtmSubPoints[2].Color := banksp3;
dtmSubPoints[2].Tolerance := 0;
dtmSubPoints[3].x := 1065;
dtmSubPoints[3].y := 223;
dtmSubPoints[3].AreaSize := 4;
dtmSubPoints[3].AreaShape := 0;
dtmSubPoints[3].Color := banksp4;
dtmSubPoints[3].Tolerance := 0;
dtmSubPoints[4].x := 1060;
dtmSubPoints[4].y := 257;
dtmSubPoints[4].AreaSize := 4;
dtmSubPoints[4].AreaShape := 0;
dtmSubPoints[4].Color := banksp5;
dtmSubPoints[4].Tolerance := 0;
TempTDTM.MainPoint := dtmMainPoint;
TempTDTM.SubPoints := dtmSubPoints;
Result := AddDTM(TempTDTM);
end;
2: begin
dtmMainPoint.x := 1045;
dtmMainPoint.y := 242;
dtmMainPoint.AreaSize := 5;
dtmMainPoint.AreaShape := 0;
dtmMainPoint.Color := gateMP;
dtmMainPoint.Tolerance := 10;
dtmSubPoints[0].x := 1045;
dtmSubPoints[0].y := 242;
dtmSubPoints[0].AreaSize := 5;
dtmSubPoints[0].AreaShape := 0;
dtmSubPoints[0].Color := gateSP1;
dtmSubPoints[0].Tolerance := 10;
dtmSubPoints[1].x := 1049;
dtmSubPoints[1].y := 215;
dtmSubPoints[1].AreaSize := 4;
dtmSubPoints[1].AreaShape := 0;
dtmSubPoints[1].Color := gateSP2;
dtmSubPoints[1].Tolerance := 10;
dtmSubPoints[2].x := 1035;
dtmSubPoints[2].y := 213;
dtmSubPoints[2].AreaSize := 4;
dtmSubPoints[2].AreaShape := 0;
dtmSubPoints[2].Color := gateSP3;
dtmSubPoints[2].Tolerance := 10;
dtmSubPoints[3].x := 1029;
dtmSubPoints[3].y := 246;
dtmSubPoints[3].AreaSize := 4;
dtmSubPoints[3].AreaShape := 0;
dtmSubPoints[3].Color := gateSP4;
dtmSubPoints[3].Tolerance := 10;
dtmSubPoints[4].x := 1066;
dtmSubPoints[4].y := 274;
dtmSubPoints[4].AreaSize := 4;
dtmSubPoints[4].AreaShape := 0;
dtmSubPoints[4].Color := gateSP5;
dtmSubPoints[4].Tolerance := 10;
TempTDTM.MainPoint := dtmMainPoint;
TempTDTM.SubPoints := dtmSubPoints;
Result := AddDTM(TempTDTM);
end;
3: begin
dtmMainPoint.x := 1047;
dtmMainPoint.y := 222;
dtmMainPoint.AreaSize := 4;
dtmMainPoint.AreaShape := 0;
dtmMainPoint.Color := fenceMP;
dtmMainPoint.Tolerance := 20;
dtmSubPoints[0].x := 1047;
dtmSubPoints[0].y := 222;
dtmSubPoints[0].AreaSize := 4;
dtmSubPoints[0].AreaShape := 0;
dtmSubPoints[0].Color := fenceSP1;
dtmSubPoints[0].Tolerance := 20;
dtmSubPoints[1].x := 1048;
dtmSubPoints[1].y := 211;
dtmSubPoints[1].AreaSize := 4;
dtmSubPoints[1].AreaShape := 0;
dtmSubPoints[1].Color := fenceSP2;
dtmSubPoints[1].Tolerance := 10;
dtmSubPoints[2].x := 1054;
dtmSubPoints[2].y := 218;
dtmSubPoints[2].AreaSize := 4;
dtmSubPoints[2].AreaShape := 0;
dtmSubPoints[2].Color := fenceSP3;
dtmSubPoints[2].Tolerance := 20;
dtmSubPoints[3].x := 1036;
dtmSubPoints[3].y := 231;
dtmSubPoints[3].AreaSize := 4;
dtmSubPoints[3].AreaShape := 0;
dtmSubPoints[3].Color := fenceSP4;
dtmSubPoints[3].Tolerance := 10;
dtmSubPoints[4].x := 1028;
dtmSubPoints[4].y := 239;
dtmSubPoints[4].AreaSize := 4;
dtmSubPoints[4].AreaShape := 0;
dtmSubPoints[4].Color := fenceSP5;
dtmSubPoints[4].Tolerance := 10;
TempTDTM.MainPoint := dtmMainPoint;
TempTDTM.SubPoints := dtmSubPoints;
Result := AddDTM(TempTDTM);
end;
end;
end;
function walkinbank: boolean;
var
WalkDTM: integer;
aFound: Extended;
begin
WalkDTM := DDTMWalk(1);
if FindDTMRotated(WalkDTM, X, Y, MMx1,MMy1,MMx2,MMy2, - 35, 35, 1, aFound) then
begin
writeln('found dtm');
MMouse(x,y,0,0);
ClickMouse2(MOUSE_LEFT);
FFlag(0);
Result := True;
end else
begin
writeln(' could not find dtm')
end;
end;
function walktogate: boolean;
var
WalkDTM: integer;
aFound: Extended;
begin
WalkDTM := DDTMWalk(2);
if FindDTMRotated(WalkDTM, X, Y, MMx1,MMy1,MMx2,MMy2, - 35, 35, 1, aFound) then
begin
writeln('found dtm');
MMouse(x,y,0,0);
ClickMouse2(MOUSE_LEFT);
FFlag(0);
Result := True;
end else
begin
writeln(' could not find dtm')
end;
end;
procedure walktopit;
begin
walkinbank;
walktogate;
end;
begin
setupSRL;
makecompass('E');
walktopit;
end.
I made the video last night, Finally got these working after 3am -.-. I'll post it sometime today!
westkevin12
2013-05-05 18:34:25
From: King
I made the video last night, Finally got these working after 3am -.-. I'll post it sometime today!
awesome! looking forward to the vid
Haxz
2013-05-05 18:51:52
From: King
I made the video last night, Finally got these working after 3am -.-. I'll post it sometime today!
Post it up already, or no cookie rep.
Sk1nyNerd
2013-05-05 19:09:42
^ +1 haha. can u put the link in here when posted? thankyouuu!
King
2013-05-05 20:36:01
From: ibot_dung11
^ +1 haha. can u put the link in here when posted? thankyouuu!
Been busy with school :P
westkevin12
2013-05-05 21:27:48
From: King
Been busy with school :P
are you going to post the link in this thread when it's up? or is it already up?
King
2013-05-05 21:44:09
From: westkevin12
are you going to post the link in this thread when it's up? or is it already up?
Ill post it :D
Flight
2013-05-05 22:02:27
Yeah no doubt this is difficult. I found the best way (if using DTMs) of walking would be using objects on the minimap as your sub points as they don't move. Now, for them to be found every time you'll need to keep a few things in mind. First of all, make the area size on each sub-point 2 or 3, which increases the radius in which that pixel can be found. Also, choose objects that are no where near a MM symbol (bank symbols, shop symbols, ect…) because these move often and might spawn over top of the object you're using as a sub-point. Another tip is to make your main DTM point with a tolerance of 255, meaning only the X & Y are absolute but no matter what color is at that point it will be found. So if someone (or NPC, ect) is standing on your main point it will still be found.
And through my experience I'd definitely say the best tolerance to use on all your sub points is 30-40. The only way to test this thoroughly is through multiple clients. Good luck!
And through my experience I'd definitely say the best tolerance to use on all your sub points is 30-40. The only way to test this thoroughly is through multiple clients. Good luck!
King
2013-05-05 22:07:47
From: Flight
Yeah no doubt this is difficult. I found the best way (if using DTMs) of walking would be using objects on the minimap as your sub points as they don't move. Now, for them to be found every time you'll need to keep a few things in mind. First of all, make the area size on each sub-point 2 or 3, which increases the radius in which that pixel can be found. Also, choose objects that are no where near a MM symbol (bank symbols, shop symbols, ect…) because these move often and might spawn over top of the object you're using as a sub-point. Another tip is to make your main DTM point with a tolerance of 255, meaning only the X & Y are absolute but no matter what color is at that point it will be found. So if someone (or NPC, ect) is standing on your main point it will still be found.
And through my experience I'd definitely say the best tolerance to use on all your sub points is 30-40. The only way to test this thoroughly is through multiple clients. Good luck!
Thankyou! I cant say how much I appreciate that, works like a charm now <3
westkevin12
2013-05-06 00:24:26
From: Flight
Yeah no doubt this is difficult. I found the best way (if using DTMs) of walking would be using objects on the minimap as your sub points as they don't move. Now, for them to be found every time you'll need to keep a few things in mind. First of all, make the area size on each sub-point 2 or 3, which increases the radius in which that pixel can be found. Also, choose objects that are no where near a MM symbol (bank symbols, shop symbols, ect…) because these move often and might spawn over top of the object you're using as a sub-point. Another tip is to make your main DTM point with a tolerance of 255, meaning only the X & Y are absolute but no matter what color is at that point it will be found. So if someone (or NPC, ect) is standing on your main point it will still be found.
And through my experience I'd definitely say the best tolerance to use on all your sub points is 30-40. The only way to test this thoroughly is through multiple clients. Good luck!
I'd rep you flight but it says I need to spread some rep around first X D thanks for the 255 mainpoint tolerance tip!
King
2013-05-06 16:38:45
From: westkevin12
I'd rep you flight but it says I need to spread some rep around first X D thanks for the 255 mainpoint tolerance tip!
Remaking the video tonight to incorporate the DDTM's as flight has suggested!
westkevin12
2013-05-06 19:39:33
From: King
Remaking the video tonight to incorporate the DDTM's as flight has suggested!
do you use aca for screencapture or prntscreen or what? i'm not sure what to use for the best results or if it even makes a difference.
King
2013-05-06 20:01:59
From: westkevin12
do you use aca for screencapture or prntscreen or what? i'm not sure what to use for the best results or if it even makes a difference.
Youll see in the video tonight!